avr32: remove support for AVR32 architecture

This patch drops support for AVR32 architecture from the Linux kernel.

The AVR32 architecture is not keeping up with the development of the
kernel, and since it shares so much of the drivers with Atmel ARM SoC,
it is starting to hinder these drivers to develop swiftly.

Also, all AVR32 AP7 SoC processors are end of lifed from Atmel (now
Microchip).

Finally, the GCC toolchain is stuck at version 4.2.x, and has not
received any patches since the last release from Atmel;
4.2.4-atmel.1.1.3.avr32linux.1. When building kernel v4.10, this
toolchain is no longer able to properly link the network stack.

Haavard and I have came to the conclusion that we feel keeping AVR32 on
life support offers more obstacles for Atmel ARMs, than it gives joy to
AVR32 users. I also suspect there are very few AVR32 users left today,
if anybody at all.

Signed-off-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no>
Signed-off-by: Håvard Skinnemoen <hskinnemoen@gmail.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>

1 files changed, 0 insertions, 305 deletions

diff --git a/arch/avr32/boards/merisc/setup.c b/arch/avr32/boards/merisc/setup.c
deleted file mode 100644
index 718a6d7eb808..000000000000
--- a/arch/avr32/boards/merisc/setup.c
+++ /dev/null
@@ -1,305 +0,0 @@
-/*
- * Board-specific setup code for the Merisc
- *
- * Copyright (C) 2008 Martinsson Elektronik AB
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/clk.h>
-#include <linux/etherdevice.h>
-#include <linux/i2c.h>
-#include <linux/i2c-gpio.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/linkage.h>
-#include <linux/platform_device.h>
-#include <linux/types.h>
-#include <linux/leds.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/ads7846.h>
-#include <linux/irq.h>
-#include <linux/fb.h>
-#include <linux/atmel-mci.h>
-#include <linux/pwm.h>
-#include <linux/leds_pwm.h>
-
-#include <asm/io.h>
-#include <asm/setup.h>
-
-#include <mach/at32ap700x.h>
-#include <mach/board.h>
-#include <mach/init.h>
-#include <mach/portmux.h>
-
-#include "merisc.h"
-
-/* Holds the autodetected board model and revision */
-static int merisc_board_id;
-
-/* Initialized by bootloader-specific startup code. */
-struct tag *bootloader_tags __initdata;
-
-/* Oscillator frequencies. These are board specific */
-unsigned long at32_board_osc_rates[3] = {
-	[0]	= 32768,	/* 32.768 kHz on RTC osc */
-	[1]	= 20000000,	/* 20 MHz on osc0 */
-	[2]	= 12000000,	/* 12 MHz on osc1 */
-};
-
-struct eth_addr {
-	u8 addr[6];
-};
-
-static struct eth_addr __initdata hw_addr[2];
-static struct macb_platform_data __initdata eth_data[2];
-
-static int ads7846_get_pendown_state_PB26(void)
-{
-	return !gpio_get_value(GPIO_PIN_PB(26));
-}
-
-static int ads7846_get_pendown_state_PB28(void)
-{
-	return !gpio_get_value(GPIO_PIN_PB(28));
-}
-
-static struct ads7846_platform_data __initdata ads7846_data = {
-	.model				= 7846,
-	.vref_delay_usecs		= 100,
-	.vref_mv			= 0,
-	.keep_vref_on			= 0,
-	.settle_delay_usecs		= 150,
-	.penirq_recheck_delay_usecs	= 1,
-	.x_plate_ohms			= 800,
-	.debounce_rep			= 4,
-	.debounce_max			= 10,
-	.debounce_tol			= 50,
-	.get_pendown_state		= ads7846_get_pendown_state_PB26,
-	.filter_init			= NULL,
-	.filter				= NULL,
-	.filter_cleanup			= NULL,
-};
-
-static struct spi_board_info __initdata spi0_board_info[] = {
-	{
-		.modalias	= "ads7846",
-		.max_speed_hz	= 3250000,
-		.chip_select	= 0,
-		.bus_num	= 0,
-		.platform_data	= &ads7846_data,
-		.mode		= SPI_MODE_0,
-	},
-};
-
-static struct mci_platform_data __initdata mci0_data = {
-	.slot[0] = {
-		.bus_width		= 4,
-		.detect_pin		= GPIO_PIN_PE(19),
-		.wp_pin			= GPIO_PIN_PE(20),
-		.detect_is_active_high	= true,
-	},
-};
-
-static int __init parse_tag_ethernet(struct tag *tag)
-{
-	int i;
-
-	i = tag->u.ethernet.mac_index;
-	if (i < ARRAY_SIZE(hw_addr)) {
-		memcpy(hw_addr[i].addr, tag->u.ethernet.hw_address,
-		       sizeof(hw_addr[i].addr));
-	}
-
-	return 0;
-}
-__tagtable(ATAG_ETHERNET, parse_tag_ethernet);
-
-static void __init set_hw_addr(struct platform_device *pdev)
-{
-	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	const u8 *addr;
-	void __iomem *regs;
-	struct clk *pclk;
-
-	if (!res)
-		return;
-
-	if (pdev->id >= ARRAY_SIZE(hw_addr))
-		return;
-
-	addr = hw_addr[pdev->id].addr;
-	if (!is_valid_ether_addr(addr))
-		return;
-
-	regs = (void __iomem __force *)res->start;
-	pclk = clk_get(&pdev->dev, "pclk");
-	if (IS_ERR(pclk))
-		return;
-
-	clk_enable(pclk);
-	__raw_writel((addr[3] << 24) | (addr[2] << 16)
-		     | (addr[1] << 8) | addr[0], regs + 0x98);
-	__raw_writel((addr[5] << 8) | addr[4], regs + 0x9c);
-	clk_disable(pclk);
-	clk_put(pclk);
-}
-
-static struct i2c_gpio_platform_data i2c_gpio_data = {
-	.sda_pin		= GPIO_PIN_PA(6),
-	.scl_pin		= GPIO_PIN_PA(7),
-	.sda_is_open_drain	= 1,
-	.scl_is_open_drain	= 1,
-	.udelay			= 2,
-};
-
-static struct platform_device i2c_gpio_device = {
-	.name	= "i2c-gpio",
-	.id	= 0,
-	.dev	= {
-		.platform_data	= &i2c_gpio_data,
-	},
-};
-
-static struct i2c_board_info __initdata i2c_info[] = {
-	{
-		I2C_BOARD_INFO("pcf8563", 0x51)
-	},
-};
-
-#if IS_ENABLED(CONFIG_LEDS_PWM)
-static struct pwm_lookup pwm_lookup[] = {
-	PWM_LOOKUP("at91sam9rl-pwm", 0, "leds_pwm", "backlight",
-		   5000, PWM_POLARITY_NORMAL),
-};
-
-static struct led_pwm pwm_leds[] = {
-	{
-		.name	= "backlight",
-		.max_brightness = 255,
-	},
-};
-
-static struct led_pwm_platform_data pwm_data = {
-	.num_leds       = ARRAY_SIZE(pwm_leds),
-	.leds           = pwm_leds,
-};
-
-static struct platform_device leds_pwm = {
-	.name   = "leds_pwm",
-	.id     = -1,
-	.dev    = {
-		.platform_data = &pwm_data,
-	},
-};
-#endif
-
-const char *merisc_model(void)
-{
-	switch (merisc_board_id) {
-	case 0:
-	case 1:
-		return "500-01";
-	case 2:
-		return "BT";
-	default:
-		return "Unknown";
-	}
-}
-
-const char *merisc_revision(void)
-{
-	switch (merisc_board_id) {
-	case 0:
-		return "B";
-	case 1:
-		return "D";
-	case 2:
-		return "A";
-	default:
-		return "Unknown";
-	}
-}
-
-static void detect_merisc_board_id(void)
-{
-	/* Board ID pins MUST be set as input or the board may be damaged */
-	at32_select_gpio(GPIO_PIN_PA(24), AT32_GPIOF_PULLUP);
-	at32_select_gpio(GPIO_PIN_PA(25), AT32_GPIOF_PULLUP);
-	at32_select_gpio(GPIO_PIN_PA(26), AT32_GPIOF_PULLUP);
-	at32_select_gpio(GPIO_PIN_PA(27), AT32_GPIOF_PULLUP);
-
-	merisc_board_id = !gpio_get_value(GPIO_PIN_PA(24)) +
-		!gpio_get_value(GPIO_PIN_PA(25)) * 2 +
-		!gpio_get_value(GPIO_PIN_PA(26)) * 4 +
-		!gpio_get_value(GPIO_PIN_PA(27)) * 8;
-}
-
-void __init setup_board(void)
-{
-	at32_map_usart(0, 0, 0);
-	at32_map_usart(1, 1, 0);
-	at32_map_usart(3, 3, 0);
-	at32_setup_serial_console(1);
-}
-
-static int __init merisc_init(void)
-{
-	detect_merisc_board_id();
-
-	printk(KERN_NOTICE "BOARD: Merisc %s revision %s\n", merisc_model(),
-	       merisc_revision());
-
-	/* Reserve pins for SDRAM */
-	at32_reserve_pin(GPIO_PIOE_BASE, ATMEL_EBI_PE_DATA_ALL | (1 << 26));
-
-	if (merisc_board_id >= 1)
-		at32_map_usart(2, 2, 0);
-
-	at32_add_device_usart(0);
-	at32_add_device_usart(1);
-	if (merisc_board_id >= 1)
-		at32_add_device_usart(2);
-	at32_add_device_usart(3);
-	set_hw_addr(at32_add_device_eth(0, &eth_data[0]));
-
-	/* ADS7846 PENIRQ */
-	if (merisc_board_id == 0) {
-		ads7846_data.get_pendown_state = ads7846_get_pendown_state_PB26;
-		at32_select_periph(GPIO_PIOB_BASE, 1 << 26,
-				   GPIO_PERIPH_A, AT32_GPIOF_PULLUP);
-		spi0_board_info[0].irq = AT32_EXTINT(1);
-	} else {
-		ads7846_data.get_pendown_state = ads7846_get_pendown_state_PB28;
-		at32_select_periph(GPIO_PIOB_BASE, 1 << 28, GPIO_PERIPH_A,
-				   AT32_GPIOF_PULLUP);
-		spi0_board_info[0].irq = AT32_EXTINT(3);
-	}
-
-	/* ADS7846 busy pin */
-	at32_select_gpio(GPIO_PIN_PA(4), AT32_GPIOF_PULLUP);
-
-	at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info));
-
-	at32_add_device_mci(0, &mci0_data);
-
-#if IS_ENABLED(CONFIG_LEDS_PWM)
-	pwm_add_table(pwm_lookup, ARRAY_SIZE(pwm_lookup));
-	at32_add_device_pwm((1 << 0) | (1 << 2));
-	platform_device_register(&leds_pwm);
-#else
-	at32_add_device_pwm((1 << 2));
-#endif
-
-	at32_select_gpio(i2c_gpio_data.sda_pin,
-		AT32_GPIOF_MULTIDRV | AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
-	at32_select_gpio(i2c_gpio_data.scl_pin,
-		AT32_GPIOF_MULTIDRV | AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
-	platform_device_register(&i2c_gpio_device);
-
-	i2c_register_board_info(0, i2c_info, ARRAY_SIZE(i2c_info));
-
-	return 0;
-}
-postcore_initcall(merisc_init);