Merge commit 'linus/master' into HEAD

Conflicts:
	MAINTAINERS

Signed-off-by: Vegard Nossum <vegard.nossum@gmail.com>

6 files changed, 119 insertions, 51 deletions

diff --git a/arch/blackfin/mach-bf537/Kconfig b/arch/blackfin/mach-bf537/Kconfig
index bbc08fd4f122..d81224f9d723 100644
--- a/arch/blackfin/mach-bf537/Kconfig
+++ b/arch/blackfin/mach-bf537/Kconfig
@@ -66,6 +66,7 @@ config IRQ_MAC_TX
 	default 11
 config IRQ_TIMER0
 	int "IRQ_TIMER0"
+	default 7 if TICKSOURCE_GPTMR0
 	default 8
 config IRQ_TIMER1
 	int "IRQ_TIMER1"
diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537.c b/arch/blackfin/mach-bf537/boards/cm_bf537.c
index 41c75b9bfac0..4fee19673127 100644
--- a/arch/blackfin/mach-bf537/boards/cm_bf537.c
+++ b/arch/blackfin/mach-bf537/boards/cm_bf537.c
@@ -86,7 +86,7 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
 /* SPI ADC chip */
 static struct bfin5xx_spi_chip spi_adc_chip_info = {
 	.enable_dma = 1,         /* use dma transfer with this chip*/
@@ -129,7 +129,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif
 
-#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
 	{
 		.modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
 		.max_speed_hz = 6250000,     /* max spi clock (SCK) speed in HZ */
diff --git a/arch/blackfin/mach-bf537/boards/pnav10.c b/arch/blackfin/mach-bf537/boards/pnav10.c
index 4e1de1e53f89..26707ce39f29 100644
--- a/arch/blackfin/mach-bf537/boards/pnav10.c
+++ b/arch/blackfin/mach-bf537/boards/pnav10.c
@@ -265,8 +265,8 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SPI_ADC_BF533) \
-	|| defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) \
+	|| defined(CONFIG_BFIN_SPI_ADC_MODULE)
 /* SPI ADC chip */
 static struct bfin5xx_spi_chip spi_adc_chip_info = {
 	.enable_dma = 1,         /* use dma transfer with this chip*/
@@ -333,8 +333,8 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif
 
-#if defined(CONFIG_SPI_ADC_BF533) \
-	|| defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) \
+	|| defined(CONFIG_BFIN_SPI_ADC_MODULE)
 	{
 		.modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
 		.max_speed_hz = 6250000,     /* max spi clock (SCK) speed in HZ */
diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c
index 0572926da23f..dfb5036f8a6b 100644
--- a/arch/blackfin/mach-bf537/boards/stamp.c
+++ b/arch/blackfin/mach-bf537/boards/stamp.c
@@ -508,8 +508,8 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SPI_ADC_BF533) \
-	|| defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) \
+	|| defined(CONFIG_BFIN_SPI_ADC_MODULE)
 /* SPI ADC chip */
 static struct bfin5xx_spi_chip spi_adc_chip_info = {
 	.enable_dma = 1,         /* use dma transfer with this chip*/
@@ -607,6 +607,43 @@ static const struct ad7879_platform_data bfin_ad7879_ts_info = {
 };
 #endif
 
+#if defined(CONFIG_INPUT_ADXL34X) || defined(CONFIG_INPUT_ADXL34X_MODULE)
+#include <linux/input.h>
+#include <linux/spi/adxl34x.h>
+static const struct adxl34x_platform_data adxl34x_info = {
+	.x_axis_offset = 0,
+	.y_axis_offset = 0,
+	.z_axis_offset = 0,
+	.tap_threshold = 0x31,
+	.tap_duration = 0x10,
+	.tap_latency = 0x60,
+	.tap_window = 0xF0,
+	.tap_axis_control = ADXL_TAP_X_EN | ADXL_TAP_Y_EN | ADXL_TAP_Z_EN,
+	.act_axis_control = 0xFF,
+	.activity_threshold = 5,
+	.inactivity_threshold = 3,
+	.inactivity_time = 4,
+	.free_fall_threshold = 0x7,
+	.free_fall_time = 0x20,
+	.data_rate = 0x8,
+	.data_range = ADXL_FULL_RES,
+
+	.ev_type = EV_ABS,
+	.ev_code_x = ABS_X,		/* EV_REL */
+	.ev_code_y = ABS_Y,		/* EV_REL */
+	.ev_code_z = ABS_Z,		/* EV_REL */
+
+	.ev_code_tap_x = BTN_TOUCH,		/* EV_KEY */
+	.ev_code_tap_y = BTN_TOUCH,		/* EV_KEY */
+	.ev_code_tap_z = BTN_TOUCH,		/* EV_KEY */
+
+/*	.ev_code_ff = KEY_F,*/		/* EV_KEY */
+/*	.ev_code_act_inactivity = KEY_A,*/	/* EV_KEY */
+	.power_mode = ADXL_AUTO_SLEEP | ADXL_LINK,
+	.fifo_mode = ADXL_FIFO_STREAM,
+};
+#endif
+
 #if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) || defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE)
 static struct bfin5xx_spi_chip spi_ad7879_chip_info = {
 	.enable_dma = 0,
@@ -695,8 +732,8 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.mode = SPI_MODE_3,
 	},
 #endif
-#if defined(CONFIG_SPI_ADC_BF533) \
-	|| defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) \
+	|| defined(CONFIG_BFIN_SPI_ADC_MODULE)
 	{
 		.modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
 		.max_speed_hz = 6250000,     /* max spi clock (SCK) speed in HZ */
@@ -1280,7 +1317,7 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 		.irq = IRQ_PF5,
 	},
 #endif
-#if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
+#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
 	{
 		I2C_BOARD_INFO("pcf8574_lcd", 0x22),
 	},
@@ -1312,6 +1349,13 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 		.platform_data = (void *)&adp5520_pdev_data,
 	},
 #endif
+#if defined(CONFIG_INPUT_ADXL34X_I2C) || defined(CONFIG_INPUT_ADXL34X_I2C_MODULE)
+	{
+		I2C_BOARD_INFO("adxl34x", 0x53),
+		.irq = IRQ_PG3,
+		.platform_data = (void *)&adxl34x_info,
+	},
+#endif
 };
 
 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
@@ -1358,16 +1402,18 @@ static struct resource bfin_pata_resources[] = {
 static struct pata_platform_info bfin_pata_platform_data = {
 	.ioport_shift = 0,
 };
-
+/* CompactFlash Storage Card Memory Mapped Adressing
+ * /REG = A11 = 1
+ */
 static struct resource bfin_pata_resources[] = {
 	{
-		.start = 0x20211820,
-		.end = 0x2021183F,
+		.start = 0x20211800,
+		.end = 0x20211807,
 		.flags = IORESOURCE_MEM,
 	},
 	{
-		.start = 0x2021181C,
-		.end = 0x2021181F,
+		.start = 0x2021180E,	/* Device Ctl */
+		.end = 0x2021180E,
 		.flags = IORESOURCE_MEM,
 	},
 };
@@ -1527,7 +1573,8 @@ static int __init stamp_init(void)
 	platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
 	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
 
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+#if (defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)) \
+	 && defined(PATA_INT)
 	irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
 #endif
 
diff --git a/arch/blackfin/mach-bf537/boards/tcm_bf537.c b/arch/blackfin/mach-bf537/boards/tcm_bf537.c
index 53ad10f3cd76..280574591201 100644
--- a/arch/blackfin/mach-bf537/boards/tcm_bf537.c
+++ b/arch/blackfin/mach-bf537/boards/tcm_bf537.c
@@ -86,7 +86,7 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
 /* SPI ADC chip */
 static struct bfin5xx_spi_chip spi_adc_chip_info = {
 	.enable_dma = 1,         /* use dma transfer with this chip*/
@@ -129,7 +129,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif
 
-#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
 	{
 		.modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
 		.max_speed_hz = 6250000,     /* max spi clock (SCK) speed in HZ */
diff --git a/arch/blackfin/mach-bf537/include/mach/anomaly.h b/arch/blackfin/mach-bf537/include/mach/anomaly.h
index 1bfd80c26c90..fc9663425465 100644
--- a/arch/blackfin/mach-bf537/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf537/include/mach/anomaly.h
@@ -6,7 +6,7 @@
  * Licensed under the GPL-2 or later.
  */
 
-/* This file shoule be up to date with:
+/* This file should be up to date with:
  *  - Revision D, 09/18/2008; ADSP-BF534/ADSP-BF536/ADSP-BF537 Blackfin Processor Anomaly List
  */
 
@@ -36,77 +36,75 @@
 
 /* Multi-issue instruction with dsp32shiftimm in slot1 and P-reg store in slot 2 not supported */
 #define ANOMALY_05000074 (1)
-/* DMA_RUN bit is not valid after a Peripheral Receive Channel DMA stops */
+/* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */
 #define ANOMALY_05000119 (1)
-/* Rx.H cannot be used to access 16-bit System MMR registers */
+/* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */
 #define ANOMALY_05000122 (1)
 /* Killed 32-bit MMR write leads to next system MMR access thinking it should be 32-bit */
 #define ANOMALY_05000157 (__SILICON_REVISION__ < 2)
-/* Turning SPORTs on while External Frame Sync Is Active May Corrupt Data */
-#define ANOMALY_05000167 (1)
-/* PPI_DELAY not functional in PPI modes with 0 frame syncs */
+/* PPI_DELAY Not Functional in PPI Modes with 0 Frame Syncs */
 #define ANOMALY_05000180 (1)
 /* Instruction Cache Is Not Functional */
 #define ANOMALY_05000237 (__SILICON_REVISION__ < 2)
-/* If i-cache is on, CSYNC/SSYNC/IDLE around Change of Control causes failures */
+/* If I-Cache Is On, CSYNC/SSYNC/IDLE Around Change of Control Causes Failures */
 #define ANOMALY_05000244 (__SILICON_REVISION__ < 3)
-/* Spurious Hardware Error from an access in the shadow of a conditional branch */
+/* False Hardware Error from an Access in the Shadow of a Conditional Branch */
 #define ANOMALY_05000245 (1)
 /* CLKIN Buffer Output Enable Reset Behavior Is Changed */
 #define ANOMALY_05000247 (1)
-/* Incorrect Bit-Shift of Data Word in Multichannel (TDM) mode in certain conditions */
+/* Incorrect Bit Shift of Data Word in Multichannel (TDM) Mode in Certain Conditions */
 #define ANOMALY_05000250 (__SILICON_REVISION__ < 3)
 /* EMAC Tx DMA error after an early frame abort */
 #define ANOMALY_05000252 (__SILICON_REVISION__ < 3)
-/* Maximum external clock speed for Timers */
+/* Maximum External Clock Speed for Timers */
 #define ANOMALY_05000253 (__SILICON_REVISION__ < 3)
-/* Incorrect Timer Pulse Width in Single-Shot PWM_OUT mode with external clock */
+/* Incorrect Timer Pulse Width in Single-Shot PWM_OUT Mode with External Clock */
 #define ANOMALY_05000254 (__SILICON_REVISION__ > 2)
-/* Entering Hibernate Mode with RTC Seconds event interrupt not functional */
+/* Entering Hibernate State with RTC Seconds Interrupt Not Functional */
 #define ANOMALY_05000255 (__SILICON_REVISION__ < 3)
 /* EMAC MDIO input latched on wrong MDC edge */
 #define ANOMALY_05000256 (__SILICON_REVISION__ < 3)
-/* Interrupt/Exception during short hardware loop may cause bad instruction fetches */
+/* Interrupt/Exception During Short Hardware Loop May Cause Bad Instruction Fetches */
 #define ANOMALY_05000257 (__SILICON_REVISION__ < 3)
-/* Instruction Cache is corrupted when bits 9 and 12 of the ICPLB Data registers differ */
+/* Instruction Cache Is Corrupted When Bits 9 and 12 of the ICPLB Data Registers Differ */
 #define ANOMALY_05000258 (((ANOMALY_BF536 || ANOMALY_BF537) && __SILICON_REVISION__ == 1) || __SILICON_REVISION__ == 2)
-/* ICPLB_STATUS MMR register may be corrupted */
+/* ICPLB_STATUS MMR Register May Be Corrupted */
 #define ANOMALY_05000260 (__SILICON_REVISION__ == 2)
-/* DCPLB_FAULT_ADDR MMR register may be corrupted */
+/* DCPLB_FAULT_ADDR MMR Register May Be Corrupted */
 #define ANOMALY_05000261 (__SILICON_REVISION__ < 3)
-/* Stores to data cache may be lost */
+/* Stores To Data Cache May Be Lost */
 #define ANOMALY_05000262 (__SILICON_REVISION__ < 3)
-/* Hardware loop corrupted when taking an ICPLB exception */
+/* Hardware Loop Corrupted When Taking an ICPLB Exception */
 #define ANOMALY_05000263 (__SILICON_REVISION__ == 2)
-/* CSYNC/SSYNC/IDLE causes infinite stall in second to last instruction in hardware loop */
+/* CSYNC/SSYNC/IDLE Causes Infinite Stall in Penultimate Instruction in Hardware Loop */
 #define ANOMALY_05000264 (__SILICON_REVISION__ < 3)
-/* Sensitivity to noise with slow input edge rates on external SPORT TX and RX clocks */
+/* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */
 #define ANOMALY_05000265 (1)
 /* Memory DMA error when peripheral DMA is running with non-zero DEB_TRAFFIC_PERIOD */
 #define ANOMALY_05000268 (__SILICON_REVISION__ < 3)
-/* High I/O activity causes output voltage of internal voltage regulator (VDDint) to decrease */
+/* High I/O Activity Causes Output Voltage of Internal Voltage Regulator (Vddint) to Decrease */
 #define ANOMALY_05000270 (__SILICON_REVISION__ < 3)
-/* Certain data cache write through modes fail for VDDint <=0.9V */
+/* Certain Data Cache Writethrough Modes Fail for Vddint <= 0.9V */
 #define ANOMALY_05000272 (1)
-/* Writes to Synchronous SDRAM memory may be lost */
+/* Writes to Synchronous SDRAM Memory May Be Lost */
 #define ANOMALY_05000273 (__SILICON_REVISION__ < 3)
-/* Writes to an I/O data register one SCLK cycle after an edge is detected may clear interrupt */
+/* Writes to an I/O Data Register One SCLK Cycle after an Edge Is Detected May Clear Interrupt */
 #define ANOMALY_05000277 (__SILICON_REVISION__ < 3)
-/* Disabling Peripherals with DMA running may cause DMA system instability */
+/* Disabling Peripherals with DMA Running May Cause DMA System Instability */
 #define ANOMALY_05000278 (((ANOMALY_BF536 || ANOMALY_BF537) && __SILICON_REVISION__ < 3) || (ANOMALY_BF534 && __SILICON_REVISION__ < 2))
 /* SPI Master boot mode does not work well with Atmel Data flash devices */
 #define ANOMALY_05000280 (1)
-/* False Hardware Error Exception when ISR context is not restored */
+/* False Hardware Error Exception When ISR Context Is Not Restored */
 #define ANOMALY_05000281 (__SILICON_REVISION__ < 3)
-/* Memory DMA corruption with 32-bit data and traffic control */
+/* Memory DMA Corruption with 32-Bit Data and Traffic Control */
 #define ANOMALY_05000282 (__SILICON_REVISION__ < 3)
 /* System MMR Write Is Stalled Indefinitely When Killed in a Particular Stage */
 #define ANOMALY_05000283 (__SILICON_REVISION__ < 3)
 /* New Feature: EMAC TX DMA Word Alignment (Not Available On Older Silicon) */
 #define ANOMALY_05000285 (__SILICON_REVISION__ < 3)
-/* SPORTs may receive bad data if FIFOs fill up */
+/* SPORTs May Receive Bad Data If FIFOs Fill Up */
 #define ANOMALY_05000288 (__SILICON_REVISION__ < 3)
-/* Memory to memory DMA source/destination descriptors must be in same memory space */
+/* Memory-To-Memory DMA Source/Destination Descriptors Must Be in Same Memory Space */
 #define ANOMALY_05000301 (1)
 /* SSYNCs After Writes To CAN/DMA MMR Registers Are Not Always Handled Correctly */
 #define ANOMALY_05000304 (__SILICON_REVISION__ < 3)
@@ -116,11 +114,11 @@
 #define ANOMALY_05000307 (__SILICON_REVISION__ < 3)
 /* Writing UART_THR while UART clock is disabled sends erroneous start bit */
 #define ANOMALY_05000309 (__SILICON_REVISION__ < 3)
-/* False hardware errors caused by fetches at the boundary of reserved memory */
+/* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */
 #define ANOMALY_05000310 (1)
-/* Errors when SSYNC, CSYNC, or loads to LT, LB and LC registers are interrupted */
+/* Errors When SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */
 #define ANOMALY_05000312 (1)
-/* PPI is level sensitive on first transfer */
+/* PPI Is Level-Sensitive on First Transfer In Single Frame Sync Modes */
 #define ANOMALY_05000313 (1)
 /* Killed System MMR Write Completes Erroneously On Next System MMR Access */
 #define ANOMALY_05000315 (__SILICON_REVISION__ < 3)
@@ -156,24 +154,46 @@
 #define ANOMALY_05000426 (1)
 /* IFLUSH Instruction at End of Hardware Loop Causes Infinite Stall */
 #define ANOMALY_05000443 (1)
+/* False Hardware Error when RETI points to invalid memory */
+#define ANOMALY_05000461 (1)
 
 /* Anomalies that don't exist on this proc */
+#define ANOMALY_05000099 (0)
+#define ANOMALY_05000120 (0)
 #define ANOMALY_05000125 (0)
+#define ANOMALY_05000149 (0)
 #define ANOMALY_05000158 (0)
+#define ANOMALY_05000171 (0)
+#define ANOMALY_05000179 (0)
 #define ANOMALY_05000183 (0)
 #define ANOMALY_05000198 (0)
+#define ANOMALY_05000215 (0)
+#define ANOMALY_05000220 (0)
+#define ANOMALY_05000227 (0)
 #define ANOMALY_05000230 (0)
+#define ANOMALY_05000231 (0)
+#define ANOMALY_05000233 (0)
+#define ANOMALY_05000242 (0)
+#define ANOMALY_05000248 (0)
 #define ANOMALY_05000266 (0)
+#define ANOMALY_05000274 (0)
+#define ANOMALY_05000287 (0)
 #define ANOMALY_05000311 (0)
 #define ANOMALY_05000323 (0)
 #define ANOMALY_05000353 (1)
+#define ANOMALY_05000362 (1)
 #define ANOMALY_05000363 (0)
 #define ANOMALY_05000380 (0)
 #define ANOMALY_05000386 (1)
+#define ANOMALY_05000389 (0)
+#define ANOMALY_05000400 (0)
 #define ANOMALY_05000412 (0)
+#define ANOMALY_05000430 (0)
 #define ANOMALY_05000432 (0)
 #define ANOMALY_05000435 (0)
 #define ANOMALY_05000447 (0)
 #define ANOMALY_05000448 (0)
+#define ANOMALY_05000456 (0)
+#define ANOMALY_05000450 (0)
 
 #endif