Blackfin arch: remove hardware PM code, oprofile not use it

Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

5 files changed, 0 insertions, 452 deletions

diff --git a/arch/blackfin/oprofile/Makefile b/arch/blackfin/oprofile/Makefile
index 634e300d67e2..f11749078b53 100644
--- a/arch/blackfin/oprofile/Makefile
+++ b/arch/blackfin/oprofile/Makefile
@@ -11,4 +11,3 @@ DRIVER_OBJS := $(addprefix ../../../drivers/oprofile/, \
 		timer_int.o )
 
 oprofile-y := $(DRIVER_OBJS) common.o
-oprofile-$(CONFIG_HARDWARE_PM) += op_model_bf533.o
diff --git a/arch/blackfin/oprofile/common.c b/arch/blackfin/oprofile/common.c
index cf8f48848d1b..beace4fb22e1 100644
--- a/arch/blackfin/oprofile/common.c
+++ b/arch/blackfin/oprofile/common.c
@@ -30,129 +30,10 @@
 
 #include <linux/oprofile.h>
 #include <linux/init.h>
-#include <linux/smp.h>
-#include <linux/errno.h>
-#include <linux/mutex.h>
-#include <linux/ptrace.h>
-#include <linux/irq.h>
-#include <linux/io.h>
 
-#include <asm/system.h>
-#include <asm/blackfin.h>
-
-#include "op_blackfin.h"
-
-#define BFIN_533_ID  0xE5040003
-#define BFIN_537_ID  0xE5040002
-
-static int pfmon_enabled;
-static struct mutex pfmon_lock;
-
-struct op_bfin533_model *model;
-
-struct op_counter_config ctr[OP_MAX_COUNTER];
-
-static int op_bfin_setup(void)
-{
-	int ret;
-
-	/* Pre-compute the values to stuff in the hardware registers.  */
-	spin_lock(&oprofilefs_lock);
-	ret = model->reg_setup(ctr);
-	spin_unlock(&oprofilefs_lock);
-
-	return ret;
-}
-
-static void op_bfin_shutdown(void)
-{
-#if 0
-	/* what is the difference between shutdown and stop? */
-#endif
-}
-
-static int op_bfin_start(void)
-{
-	int ret = -EBUSY;
-
-	printk(KERN_INFO "KSDBG:in %s\n", __func__);
-	mutex_lock(&pfmon_lock);
-	if (!pfmon_enabled) {
-		ret = model->start(ctr);
-		pfmon_enabled = !ret;
-	}
-	mutex_unlock(&pfmon_lock);
-
-	return ret;
-}
-
-static void op_bfin_stop(void)
-{
-	mutex_lock(&pfmon_lock);
-	if (pfmon_enabled) {
-		model->stop();
-		pfmon_enabled = 0;
-	}
-	mutex_unlock(&pfmon_lock);
-}
-
-static int op_bfin_create_files(struct super_block *sb, struct dentry *root)
-{
-	int i;
-
-	for (i = 0; i < model->num_counters; ++i) {
-		struct dentry *dir;
-		char buf[3];
-		printk(KERN_INFO "Oprofile: creating files... \n");
-
-		snprintf(buf, sizeof buf, "%d", i);
-		dir = oprofilefs_mkdir(sb, root, buf);
-
-		oprofilefs_create_ulong(sb, dir, "enabled", &ctr[i].enabled);
-		oprofilefs_create_ulong(sb, dir, "event", &ctr[i].event);
-		oprofilefs_create_ulong(sb, dir, "count", &ctr[i].count);
-		/*
-		 * We dont support per counter user/kernel selection, but
-		 * we leave the entries because userspace expects them
-		 */
-		oprofilefs_create_ulong(sb, dir, "kernel", &ctr[i].kernel);
-		oprofilefs_create_ulong(sb, dir, "user", &ctr[i].user);
-		oprofilefs_create_ulong(sb, dir, "unit_mask",
-					&ctr[i].unit_mask);
-	}
-
-	return 0;
-}
 int __init oprofile_arch_init(struct oprofile_operations *ops)
 {
-#ifdef CONFIG_HARDWARE_PM
-	mutex_init(&pfmon_lock);
-
-
-	switch (bfin_read_CHIPID() & CHIPID_MANUFACTURE) {
-	case 0xca:
-		printk(KERN_INFO "Oprofile: cpu vendor is Analog Devices.\n");
-		model = &op_model_bfin533;
-		model->num_counters = 2;
-		break;
-	default:
-		return -ENODEV;
-	}
-
-	ops->cpu_type = model->name;
-	ops->create_files = op_bfin_create_files;
-	ops->setup = op_bfin_setup;
-	ops->shutdown = op_bfin_shutdown;
-	ops->start = op_bfin_start;
-	ops->stop = op_bfin_stop;
-
-	printk(KERN_INFO "oprofile: using %s performance monitoring.\n",
-	       ops->cpu_type);
-
-	return 0;
-#else
 	return -1;
-#endif
 }
 
 void oprofile_arch_exit(void)
diff --git a/arch/blackfin/oprofile/op_blackfin.h b/arch/blackfin/oprofile/op_blackfin.h
deleted file mode 100644
index 37aec0eb00d0..000000000000
--- a/arch/blackfin/oprofile/op_blackfin.h
+++ /dev/null
@@ -1,98 +0,0 @@
-/*
- * File:         arch/blackfin/oprofile/op_blackfin.h
- * Based on:
- * Author:       Anton Blanchard <anton@au.ibm.com>
- *
- * Created:
- * Description:
- *
- * Modified:
- *               Copyright (C) 2004 Anton Blanchard <anton@au.ibm.com>, IBM
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-#ifndef OP_BLACKFIN_H
-#define OP_BLACKFIN_H 1
-
-#define OP_MAX_COUNTER 2
-
-#include <asm/blackfin.h>
-
-/* Per-counter configuration as set via oprofilefs.  */
-struct op_counter_config {
-	unsigned long valid;
-	unsigned long enabled;
-	unsigned long event;
-	unsigned long count;
-	unsigned long kernel;
-	unsigned long user;
-	unsigned long unit_mask;
-};
-
-/* System-wide configuration as set via oprofilefs.  */
-struct op_system_config {
-	unsigned long enable_kernel;
-	unsigned long enable_user;
-};
-
-/* Per-arch configuration */
-struct op_bfin533_model {
-	int (*reg_setup) (struct op_counter_config *);
-	int (*start) (struct op_counter_config *);
-	void (*stop) (void);
-	int num_counters;
-	char *name;
-};
-
-extern struct op_bfin533_model op_model_bfin533;
-
-static inline unsigned int ctr_read(void)
-{
-	unsigned int tmp;
-
-	tmp = bfin_read_PFCTL();
-	CSYNC();
-
-	return tmp;
-}
-
-static inline void ctr_write(unsigned int val)
-{
-	bfin_write_PFCTL(val);
-	CSYNC();
-}
-
-static inline void count_read(unsigned int *count)
-{
-	count[0] = bfin_read_PFCNTR0();
-	count[1] = bfin_read_PFCNTR1();
-	CSYNC();
-}
-
-static inline void count_write(unsigned int *count)
-{
-	bfin_write_PFCNTR0(count[0]);
-	bfin_write_PFCNTR1(count[1]);
-	CSYNC();
-}
-
-extern int pm_overflow_handler(struct pt_regs *regs);
-
-#endif
diff --git a/arch/blackfin/oprofile/op_model_bf533.c b/arch/blackfin/oprofile/op_model_bf533.c
deleted file mode 100644
index 0e34df169b2d..000000000000
--- a/arch/blackfin/oprofile/op_model_bf533.c
+++ /dev/null
@@ -1,161 +0,0 @@
-/*
- * File:         arch/blackfin/oprofile/op_model_bf533.c
- * Based on:
- * Author:       Anton Blanchard <anton@au.ibm.com>
- *
- * Created:
- * Description:
- *
- * Modified:
- *               Copyright (C) 2004 Anton Blanchard <anton@au.ibm.com>, IBM
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-#include <linux/oprofile.h>
-#include <linux/init.h>
-#include <linux/smp.h>
-#include <linux/interrupt.h>
-#include <linux/ptrace.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <asm/system.h>
-#include <asm/processor.h>
-#include <asm/blackfin.h>
-
-#include "op_blackfin.h"
-
-#define PM_ENABLE 0x01;
-#define PM_CTL1_ENABLE  0x18
-#define PM_CTL0_ENABLE  0xC000
-#define COUNT_EDGE_ONLY 0x3000000
-
-static int oprofile_running;
-
-static unsigned curr_pfctl, curr_count[2];
-
-static int bfin533_reg_setup(struct op_counter_config *ctr)
-{
-	unsigned int pfctl = 0;
-	unsigned int count[2];
-
-	/* set Blackfin perf monitor regs with ctr */
-	if (ctr[0].enabled) {
-		pfctl |= (PM_CTL0_ENABLE | ((char)ctr[0].event << 5));
-		count[0] = 0xFFFFFFFF - ctr[0].count;
-		curr_count[0] = count[0];
-	}
-	if (ctr[1].enabled) {
-		pfctl |= (PM_CTL1_ENABLE | ((char)ctr[1].event << 16));
-		count[1] = 0xFFFFFFFF - ctr[1].count;
-		curr_count[1] = count[1];
-	}
-
-	pr_debug("ctr[0].enabled=%d,ctr[1].enabled=%d,ctr[0].event<<5=0x%x,ctr[1].event<<16=0x%x\n", ctr[0].enabled, ctr[1].enabled, ctr[0].event << 5, ctr[1].event << 16);
-	pfctl |= COUNT_EDGE_ONLY;
-	curr_pfctl = pfctl;
-
-	pr_debug("write 0x%x to pfctl\n", pfctl);
-	ctr_write(pfctl);
-	count_write(count);
-
-	return 0;
-}
-
-static int bfin533_start(struct op_counter_config *ctr)
-{
-	unsigned int pfctl = ctr_read();
-
-	pfctl |= PM_ENABLE;
-	curr_pfctl = pfctl;
-
-	ctr_write(pfctl);
-
-	oprofile_running = 1;
-	pr_debug("start oprofile counter \n");
-
-	return 0;
-}
-
-static void bfin533_stop(void)
-{
-	int pfctl;
-
-	pfctl = ctr_read();
-	pfctl &= ~PM_ENABLE;
-	/* freeze counters */
-	ctr_write(pfctl);
-
-	oprofile_running = 0;
-	pr_debug("stop oprofile counter \n");
-}
-
-static int get_kernel(void)
-{
-	int ipend, is_kernel;
-
-	ipend = bfin_read_IPEND();
-
-	/* test bit 15 */
-	is_kernel = ((ipend & 0x8000) != 0);
-
-	return is_kernel;
-}
-
-int pm_overflow_handler(struct pt_regs *regs)
-{
-	int is_kernel;
-	int i, cpu;
-	unsigned int pc, pfctl;
-	unsigned int count[2];
-
-	pr_debug("get interrupt in %s\n", __func__);
-	if (oprofile_running == 0) {
-		pr_debug("error: entering interrupt when oprofile is stopped.\n\r");
-		return -1;
-	}
-
-	is_kernel = get_kernel();
-	cpu = smp_processor_id();
-	pc = regs->pc;
-	pfctl = ctr_read();
-
-	/* read the two event counter regs */
-	count_read(count);
-
-	/* if the counter overflows, add sample to oprofile buffer */
-	for (i = 0; i < 2; ++i) {
-		if (oprofile_running) {
-			oprofile_add_sample(regs, i);
-		}
-	}
-
-	/* reset the perfmon counter */
-	ctr_write(curr_pfctl);
-	count_write(curr_count);
-	return 0;
-}
-
-struct op_bfin533_model op_model_bfin533 = {
-	.reg_setup = bfin533_reg_setup,
-	.start = bfin533_start,
-	.stop = bfin533_stop,
-	.num_counters = 2,
-	.name = "blackfin/bf533"
-};
diff --git a/arch/blackfin/oprofile/timer_int.c b/arch/blackfin/oprofile/timer_int.c
deleted file mode 100644
index 6c6f8606af4c..000000000000
--- a/arch/blackfin/oprofile/timer_int.c
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
- * File:         arch/blackfin/oprofile/timer_int.c
- * Based on:
- * Author:       Michael Kang
- *
- * Created:
- * Description:
- *
- * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-#include <linux/init.h>
-#include <linux/smp.h>
-#include <linux/irq.h>
-#include <linux/oprofile.h>
-#include <linux/ptrace.h>
-
-static void enable_sys_timer0()
-{
-}
-static void disable_sys_timer0()
-{
-}
-
-static irqreturn_t sys_timer0_int_handler(int irq, void *dev_id,
-					  struct pt_regs *regs)
-{
-	oprofile_add_sample(regs, 0);
-	return IRQ_HANDLED;
-}
-
-static int sys_timer0_start(void)
-{
-	enable_sys_timer0();
-	return request_irq(IVG11, sys_timer0_int_handler, 0, "sys_timer0", NULL);
-}
-
-static void sys_timer0_stop(void)
-{
-	disable_sys_timer();
-}
-
-int __init sys_timer0_init(struct oprofile_operations *ops)
-{
-	extern int nmi_active;
-
-	if (nmi_active <= 0)
-		return -ENODEV;
-
-	ops->start = timer_start;
-	ops->stop = timer_stop;
-	ops->cpu_type = "timer";
-	printk(KERN_INFO "oprofile: using NMI timer interrupt.\n");
-	return 0;
-}