m68knommu: move the 523x platform code into the common ColdFire code directory

All these separate directories for each ColdFire CPU SoC varient seems like
overkill. The majority of them only contain a single small config file. Move
these into the common ColdFire code directory.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>

2 files changed, 0 insertions, 105 deletions

diff --git a/arch/m68k/platform/523x/Makefile b/arch/m68k/platform/523x/Makefile
deleted file mode 100644
index e74be6926385..000000000000
--- a/arch/m68k/platform/523x/Makefile
+++ /dev/null
@@ -1,17 +0,0 @@
-#
-# Makefile for the m68knommu linux kernel.
-#
-
-#
-# If you want to play with the HW breakpoints then you will
-# need to add define this,  which will give you a stack backtrace
-# on the console port whenever a DBG interrupt occurs.  You have to
-# set up you HW breakpoints to trigger a DBG interrupt:
-#
-# ccflags-y := -DTRAP_DBG_INTERRUPT
-# asflags-y := -DTRAP_DBG_INTERRUPT
-#
-
-asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
-
-obj-y := config.o
diff --git a/arch/m68k/platform/523x/config.c b/arch/m68k/platform/523x/config.c
deleted file mode 100644
index 5d57a4249412..000000000000
--- a/arch/m68k/platform/523x/config.c
+++ /dev/null
@@ -1,88 +0,0 @@
-/***************************************************************************/
-
-/*
- *	linux/arch/m68knommu/platform/523x/config.c
- *
- *	Sub-architcture dependent initialization code for the Freescale
- *	523x CPUs.
- *
- *	Copyright (C) 1999-2005, Greg Ungerer (gerg@snapgear.com)
- *	Copyright (C) 2001-2003, SnapGear Inc. (www.snapgear.com)
- */
-
-/***************************************************************************/
-
-#include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <asm/machdep.h>
-#include <asm/coldfire.h>
-#include <asm/mcfsim.h>
-#include <asm/mcfgpio.h>
-
-/***************************************************************************/
-
-struct mcf_gpio_chip mcf_gpio_chips[] = {
-	MCFGPS(PIRQ, 1, 7, MCFEPORT_EPDDR, MCFEPORT_EPDR, MCFEPORT_EPPDR),
-	MCFGPF(ADDR, 13, 3),
-	MCFGPF(DATAH, 16, 8),
-	MCFGPF(DATAL, 24, 8),
-	MCFGPF(BUSCTL, 32, 8),
-	MCFGPF(BS, 40, 4),
-	MCFGPF(CS, 49, 7),
-	MCFGPF(SDRAM, 56, 6),
-	MCFGPF(FECI2C, 64, 4),
-	MCFGPF(UARTH, 72, 2),
-	MCFGPF(UARTL, 80, 8),
-	MCFGPF(QSPI, 88, 5),
-	MCFGPF(TIMER, 96, 8),
-	MCFGPF(ETPU, 104, 3),
-};
-
-unsigned int mcf_gpio_chips_size = ARRAY_SIZE(mcf_gpio_chips);
-
-/***************************************************************************/
-
-#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
-
-static void __init m523x_qspi_init(void)
-{
-	u16 par;
-
-	/* setup QSPS pins for QSPI with gpio CS control */
-	writeb(0x1f, MCFGPIO_PAR_QSPI);
-	/* and CS2 & CS3 as gpio */
-	par = readw(MCFGPIO_PAR_TIMER);
-	par &= 0x3f3f;
-	writew(par, MCFGPIO_PAR_TIMER);
-}
-
-#endif /* IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) */
-
-/***************************************************************************/
-
-static void __init m523x_fec_init(void)
-{
-	u16 par;
-	u8 v;
-
-	/* Set multi-function pins to ethernet use */
-	par = readw(MCF_IPSBAR + 0x100082);
-	writew(par | 0xf00, MCF_IPSBAR + 0x100082);
-	v = readb(MCF_IPSBAR + 0x100078);
-	writeb(v | 0xc0, MCF_IPSBAR + 0x100078);
-}
-
-/***************************************************************************/
-
-void __init config_BSP(char *commandp, int size)
-{
-	mach_sched_init = hw_timer_init;
-	m523x_fec_init();
-#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
-	m523x_qspi_init();
-#endif
-}
-
-/***************************************************************************/