Merge branch 'for-3.5' of ../cgroup into block/for-3.5/core-merged

cgroup/for-3.5 contains the following changes which blk-cgroup needs
to proceed with the on-going cleanup.

* Dynamic addition and removal of cftypes to make config/stat file
  handling modular for policies.

* cgroup removal update to not wait for css references to drain to fix
  blkcg removal hang caused by cfq caching cfqgs.

Pull in cgroup/for-3.5 into block/for-3.5/core.  This causes the
following conflicts in block/blk-cgroup.c.

* 761b3ef50e "cgroup: remove cgroup_subsys argument from callbacks"
  conflicts with blkiocg_pre_destroy() addition and blkiocg_attach()
  removal.  Resolved by removing @subsys from all subsys methods.

* 676f7c8f84 "cgroup: relocate cftype and cgroup_subsys definitions in
  controllers" conflicts with ->pre_destroy() and ->attach() updates
  and removal of modular config.  Resolved by dropping forward
  declarations of the methods and applying updates to the relocated
  blkio_subsys.

* 4baf6e3325 "cgroup: convert all non-memcg controllers to the new
  cftype interface" builds upon the previous item.  Resolved by adding
  ->base_cftypes to the relocated blkio_subsys.

Signed-off-by: Tejun Heo <tj@kernel.org>

1 files changed, 8 insertions, 222 deletions

diff --git a/arch/m68k/platform/528x/config.c b/arch/m68k/platform/528x/config.c
index 7abe77a2f3e3..d4492926614c 100644
--- a/arch/m68k/platform/528x/config.c
+++ b/arch/m68k/platform/528x/config.c
@@ -17,229 +17,33 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
-#include <linux/spi/spi.h>
-#include <linux/gpio.h>
 #include <asm/machdep.h>
 #include <asm/coldfire.h>
 #include <asm/mcfsim.h>
 #include <asm/mcfuart.h>
-#include <asm/mcfqspi.h>
 
 /***************************************************************************/
 
-static struct mcf_platform_uart m528x_uart_platform[] = {
-	{
-		.mapbase	= MCFUART_BASE1,
-		.irq		= MCFINT_VECBASE + MCFINT_UART0,
-	},
-	{
-		.mapbase 	= MCFUART_BASE2,
-		.irq		= MCFINT_VECBASE + MCFINT_UART0 + 1,
-	},
-	{
-		.mapbase 	= MCFUART_BASE3,
-		.irq		= MCFINT_VECBASE + MCFINT_UART0 + 2,
-	},
-	{ },
-};
-
-static struct platform_device m528x_uart = {
-	.name			= "mcfuart",
-	.id			= 0,
-	.dev.platform_data	= m528x_uart_platform,
-};
-
-static struct resource m528x_fec_resources[] = {
-	{
-		.start		= MCFFEC_BASE,
-		.end		= MCFFEC_BASE + MCFFEC_SIZE - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= 64 + 23,
-		.end		= 64 + 23,
-		.flags		= IORESOURCE_IRQ,
-	},
-	{
-		.start		= 64 + 27,
-		.end		= 64 + 27,
-		.flags		= IORESOURCE_IRQ,
-	},
-	{
-		.start		= 64 + 29,
-		.end		= 64 + 29,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device m528x_fec = {
-	.name			= "fec",
-	.id			= 0,
-	.num_resources		= ARRAY_SIZE(m528x_fec_resources),
-	.resource		= m528x_fec_resources,
-};
-
-#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE)
-static struct resource m528x_qspi_resources[] = {
-	{
-		.start		= MCFQSPI_IOBASE,
-		.end		= MCFQSPI_IOBASE + MCFQSPI_IOSIZE - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= MCFINT_VECBASE + MCFINT_QSPI,
-		.end		= MCFINT_VECBASE + MCFINT_QSPI,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-#define MCFQSPI_CS0    147
-#define MCFQSPI_CS1    148
-#define MCFQSPI_CS2    149
-#define MCFQSPI_CS3    150
-
-static int m528x_cs_setup(struct mcfqspi_cs_control *cs_control)
-{
-	int status;
-
-	status = gpio_request(MCFQSPI_CS0, "MCFQSPI_CS0");
-	if (status) {
-		pr_debug("gpio_request for MCFQSPI_CS0 failed\n");
-		goto fail0;
-	}
-	status = gpio_direction_output(MCFQSPI_CS0, 1);
-	if (status) {
-		pr_debug("gpio_direction_output for MCFQSPI_CS0 failed\n");
-		goto fail1;
-	}
-
-	status = gpio_request(MCFQSPI_CS1, "MCFQSPI_CS1");
-	if (status) {
-		pr_debug("gpio_request for MCFQSPI_CS1 failed\n");
-		goto fail1;
-	}
-	status = gpio_direction_output(MCFQSPI_CS1, 1);
-	if (status) {
-		pr_debug("gpio_direction_output for MCFQSPI_CS1 failed\n");
-		goto fail2;
-	}
-
-	status = gpio_request(MCFQSPI_CS2, "MCFQSPI_CS2");
-	if (status) {
-		pr_debug("gpio_request for MCFQSPI_CS2 failed\n");
-		goto fail2;
-	}
-	status = gpio_direction_output(MCFQSPI_CS2, 1);
-	if (status) {
-		pr_debug("gpio_direction_output for MCFQSPI_CS2 failed\n");
-		goto fail3;
-	}
-
-	status = gpio_request(MCFQSPI_CS3, "MCFQSPI_CS3");
-	if (status) {
-		pr_debug("gpio_request for MCFQSPI_CS3 failed\n");
-		goto fail3;
-	}
-	status = gpio_direction_output(MCFQSPI_CS3, 1);
-	if (status) {
-		pr_debug("gpio_direction_output for MCFQSPI_CS3 failed\n");
-		goto fail4;
-	}
-
-	return 0;
-
-fail4:
-	gpio_free(MCFQSPI_CS3);
-fail3:
-	gpio_free(MCFQSPI_CS2);
-fail2:
-	gpio_free(MCFQSPI_CS1);
-fail1:
-	gpio_free(MCFQSPI_CS0);
-fail0:
-	return status;
-}
-
-static void m528x_cs_teardown(struct mcfqspi_cs_control *cs_control)
-{
-	gpio_free(MCFQSPI_CS3);
-	gpio_free(MCFQSPI_CS2);
-	gpio_free(MCFQSPI_CS1);
-	gpio_free(MCFQSPI_CS0);
-}
-
-static void m528x_cs_select(struct mcfqspi_cs_control *cs_control,
-			    u8 chip_select, bool cs_high)
-{
-	gpio_set_value(MCFQSPI_CS0 + chip_select, cs_high);
-}
-
-static void m528x_cs_deselect(struct mcfqspi_cs_control *cs_control,
-			      u8 chip_select, bool cs_high)
-{
-	gpio_set_value(MCFQSPI_CS0 + chip_select, !cs_high);
-}
-
-static struct mcfqspi_cs_control m528x_cs_control = {
-	.setup                  = m528x_cs_setup,
-	.teardown               = m528x_cs_teardown,
-	.select                 = m528x_cs_select,
-	.deselect               = m528x_cs_deselect,
-};
-
-static struct mcfqspi_platform_data m528x_qspi_data = {
-	.bus_num		= 0,
-	.num_chipselect		= 4,
-	.cs_control		= &m528x_cs_control,
-};
-
-static struct platform_device m528x_qspi = {
-	.name			= "mcfqspi",
-	.id			= 0,
-	.num_resources		= ARRAY_SIZE(m528x_qspi_resources),
-	.resource		= m528x_qspi_resources,
-	.dev.platform_data	= &m528x_qspi_data,
-};
+#ifdef CONFIG_SPI_COLDFIRE_QSPI
 
 static void __init m528x_qspi_init(void)
 {
 	/* setup Port QS for QSPI with gpio CS control */
 	__raw_writeb(0x07, MCFGPIO_PQSPAR);
 }
-#endif /* defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE) */
 
-static struct platform_device *m528x_devices[] __initdata = {
-	&m528x_uart,
-	&m528x_fec,
-#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE)
-	&m528x_qspi,
-#endif
-};
+#endif /* CONFIG_SPI_COLDFIRE_QSPI */
 
 /***************************************************************************/
 
-static void __init m528x_uart_init_line(int line, int irq)
+static void __init m528x_uarts_init(void)
 {
 	u8 port;
 
-	if ((line < 0) || (line > 2))
-		return;
-
 	/* make sure PUAPAR is set for UART0 and UART1 */
-	if (line < 2) {
-		port = readb(MCF5282_GPIO_PUAPAR);
-		port |= (0x03 << (line * 2));
-		writeb(port, MCF5282_GPIO_PUAPAR);
-	}
-}
-
-static void __init m528x_uarts_init(void)
-{
-	const int nrlines = ARRAY_SIZE(m528x_uart_platform);
-	int line;
-
-	for (line = 0; (line < nrlines); line++)
-		m528x_uart_init_line(line, m528x_uart_platform[line].irq);
+	port = readb(MCF5282_GPIO_PUAPAR);
+	port |= 0x03 | (0x03 << 2);
+	writeb(port, MCF5282_GPIO_PUAPAR);
 }
 
 /***************************************************************************/
@@ -256,14 +60,6 @@ static void __init m528x_fec_init(void)
 
 /***************************************************************************/
 
-static void m528x_cpu_reset(void)
-{
-	local_irq_disable();
-	__raw_writeb(MCF_RCR_SWRESET, MCF_IPSBAR + MCF_RCR);
-}
-
-/***************************************************************************/
-
 #ifdef CONFIG_WILDFIRE
 void wildfire_halt(void)
 {
@@ -299,22 +95,12 @@ void __init config_BSP(char *commandp, int size)
 #ifdef CONFIG_WILDFIREMOD
 	mach_halt = wildfiremod_halt;
 #endif
-}
-
-/***************************************************************************/
-
-static int __init init_BSP(void)
-{
-	mach_reset = m528x_cpu_reset;
+	mach_sched_init = hw_timer_init;
 	m528x_uarts_init();
 	m528x_fec_init();
-#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE)
+#ifdef CONFIG_SPI_COLDFIRE_QSPI
 	m528x_qspi_init();
 #endif
-	platform_add_devices(m528x_devices, ARRAY_SIZE(m528x_devices));
-	return 0;
 }
 
-arch_initcall(init_BSP);
-
 /***************************************************************************/