diff options
| author |   Greg Ungerer <gerg@uclinux.org> | 2009-05-22 13:33:35 +1000 |
|---|---|---|
| committer | Greg Ungerer <gerg@uclinux.org> | 2009-09-16 09:43:52 +1000 |
| commit | 39f0fb6a3448cfc316e0d5295ed1b121db50037e (patch) | |
| tree | 657db8073835e8d499708a898a36f1d3a1e39a32 /arch/m68knommu/platform/5407 | |
| parent | m68knommu: clean up ColdFire 532x CPU timer setup (diff) | |
| download | linux-dev-39f0fb6a3448cfc316e0d5295ed1b121db50037e.tar.xz linux-dev-39f0fb6a3448cfc316e0d5295ed1b121db50037e.zip | |
m68knommu: map ColdFire interrupts to correct masking bits
The older simple ColdFire interrupt controller has no one-to-one mapping
of interrupt numbers to bits in the interrupt mask register. Create a
mapping array that each ColdFire CPU type can populate with its available
interrupts and the bits that each use in the interrupt mask register.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Diffstat (limited to 'arch/m68knommu/platform/5407')
| -rw-r--r-- | arch/m68knommu/platform/5407/config.c | 15 |
1 files changed, 11 insertions, 4 deletions
diff --git a/arch/m68knommu/platform/5407/config.c b/arch/m68knommu/platform/5407/config.c index cc80029a4a00..70ea789a400c 100644 --- a/arch/m68knommu/platform/5407/config.c +++ b/arch/m68knommu/platform/5407/config.c @@ -49,12 +49,11 @@ static void __init m5407_uart_init_line(int line, int irq) if (line == 0) { writeb(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI1, MCF_MBAR + MCFSIM_UART1ICR); writeb(irq, MCF_MBAR + MCFUART_BASE1 + MCFUART_UIVR); - mcf_clrimr(MCFINTC_UART0); + mcf_mapirq2imr(irq, MCFINTC_UART0); } else if (line == 1) { writeb(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI2, MCF_MBAR + MCFSIM_UART2ICR); writeb(irq, MCF_MBAR + MCFUART_BASE2 + MCFUART_UIVR); - mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_UART2); - mcf_clrimr(MCFINTC_UART1); + mcf_mapirq2imr(irq, MCFINTC_UART1); } } @@ -74,11 +73,13 @@ static void __init m5407_timers_init(void) /* Timer1 is always used as system timer */ writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI3, MCF_MBAR + MCFSIM_TIMER1ICR); + mcf_mapirq2imr(MCF_IRQ_TIMER, MCFINTC_TIMER1); #ifdef CONFIG_HIGHPROFILE /* Timer2 is to be used as a high speed profile timer */ writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL7 | MCFSIM_ICR_PRI3, MCF_MBAR + MCFSIM_TIMER2ICR); + mcf_mapirq2imr(MCF_IRQ_PROFILER, MCFINTC_TIMER2); #endif } @@ -99,13 +100,19 @@ void __init config_BSP(char *commandp, int size) { mach_reset = m5407_cpu_reset; m5407_timers_init(); + m5407_uarts_init(); + + /* Only support the external interrupts on their primary level */ + mcf_mapirq2imr(25, MCFINTC_EINT1); + mcf_mapirq2imr(27, MCFINTC_EINT3); + mcf_mapirq2imr(29, MCFINTC_EINT5); + mcf_mapirq2imr(31, MCFINTC_EINT7); } /***************************************************************************/ static int __init init_BSP(void) { - m5407_uarts_init(); platform_add_devices(m5407_devices, ARRAY_SIZE(m5407_devices)); return 0; } |