Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

Pull MIPS updates from Ralf Baechle:
 "This is the main MIPS pull request for 4.9:

  MIPS core arch code:
   - traps: 64bit kernels should read CP0_EBase 64bit
   - traps: Convert ebase to KSEG0
   - c-r4k: Drop bc_wback_inv() from icache flush
   - c-r4k: Split user/kernel flush_icache_range()
   - cacheflush: Use __flush_icache_user_range()
   - uprobes: Flush icache via kernel address
   - KVM: Use __local_flush_icache_user_range()
   - c-r4k: Fix flush_icache_range() for EVA
   - Fix -mabi=64 build of vdso.lds
   - VDSO: Drop duplicated -I*/-E* aflags
   - tracing: move insn_has_delay_slot to a shared header
   - tracing: disable uprobe/kprobe on compact branch instructions
   - ptrace: Fix regs_return_value for kernel context
   - Squash lines for simple wrapper functions
   - Move identification of VP(E) into proc.c from smp-mt.c
   - Add definitions of SYNC barrierstype values
   - traps: Ensure full EBase is written
   - tlb-r4k: If there are wired entries, don't use TLBINVF
   - Sanitise coherentio semantics
   - dma-default: Don't check hw_coherentio if device is non-coherent
   - Support per-device DMA coherence
   - Adjust MIPS64 CAC_BASE to reflect Config.K0
   - Support generating Flattened Image Trees (.itb)
   - generic: Introduce generic DT-based board support
   - generic: Convert SEAD-3 to a generic board
   - Enable hardened usercopy
   - Don't specify STACKPROTECTOR in defconfigs

  Octeon:
   - Delete dead code and files across the platform.
   - Change to use all memory into use by default.
   - Rename upper case variables in setup code to lowercase.
   - Delete legacy hack for broken bootloaders.
   - Leave maintaining the link state to the actual ethernet/PHY drivers.
   - Add DTS for D-Link DSR-500N.
   - Fix PCI interrupt routing on D-Link DSR-500N.

  Pistachio:
   - Remove ANDROID_TIMED_OUTPUT from defconfig

  TX39xx:
   - Move GPIO setup from .mem_setup() to .arch_init()
   - Convert to Common Clock Framework

  TX49xx:
   - Move GPIO setup from .mem_setup() to .arch_init()
   - Convert to Common Clock Framework

  txx9wdt:
   - Add missing clock (un)prepare calls for CCF

  BMIPS:
   - Add PW, GPIO SDHCI and NAND device node names
   - Support APPENDED_DTB
   - Add missing bcm97435svmb to DT_NONE
   - Rename bcm96358nb4ser to bcm6358-neufbox4-sercom
   - Add DT examples for BCM63268, BCM3368 and BCM6362
   - Add support for BCM3368 and BCM6362

  PCI
   - Reduce stack frame usage
   - Use struct list_head lists
   - Support for CONFIG_PCI_DOMAINS_GENERIC
   - Make pcibios_set_cache_line_size an initcall
   - Inline pcibios_assign_all_busses
   - Split pci.c into pci.c & pci-legacy.c
   - Introduce CONFIG_PCI_DRIVERS_LEGACY
   - Support generic drivers

  CPC
   - Convert bare 'unsigned' to 'unsigned int'
   - Avoid lock when MIPS CM >= 3 is present

  GIC:
   - Delete unused file smp-gic.c

  mt7620:
   - Delete unnecessary assignment for the field "owner" from PCI

  BCM63xx:
   - Let clk_disable() return immediately if clk is NULL

  pm-cps:
   - Change FSB workaround to CPU blacklist
   - Update comments on barrier instructions
   - Use MIPS standard lightweight ordering barrier
   - Use MIPS standard completion barrier
   - Remove selection of sync types
   - Add MIPSr6 CPU support
   - Support CM3 changes to Coherence Enable Register

  SMP:
   - Wrap call to mips_cpc_lock_other in mips_cm_lock_other
   - Introduce mechanism for freeing and allocating IPIs

  cpuidle:
   - cpuidle-cps: Enable use with MIPSr6 CPUs.

  SEAD3:
   - Rewrite to use DT and generic kernel feature.

  USB:
   - host: ehci-sead3: Remove SEAD-3 EHCI code

  FBDEV:
   - cobalt_lcdfb: Drop SEAD3 support

  dt-bindings:
   -  Document a binding for simple ASCII LCDs

  auxdisplay:
   - img-ascii-lcd: driver for simple ASCII LCD displays

  irqchip i8259:
   - i8259: Add domain before mapping parent irq
   - i8259: Allow platforms to override poll function
   - i8259: Remove unused i8259A_irq_pending

  Malta:
   - Rewrite to use DT

  of/platform:
   - Probe "isa" busses by default

  CM:
   - Print CM error reports upon bus errors

  Module:
   - Migrate exception table users off module.h and onto extable.h
   - Make various drivers explicitly non-modular:
   - Audit and remove any unnecessary uses of module.h

  mailmap:
   - Canonicalize to Qais' current email address.

  Documentation:
   - MIPS supports HAVE_REGS_AND_STACK_ACCESS_API

  Loongson1C:
   - Add CPU support for Loongson1C
   - Add board support
   - Add defconfig
   - Add RTC support for Loongson1C board

  All this except one Documentation fix has sat in linux-next and has
  survived Imagination's automated build test system"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (127 commits)
  Documentation: MIPS supports HAVE_REGS_AND_STACK_ACCESS_API
  MIPS: ptrace: Fix regs_return_value for kernel context
  MIPS: VDSO: Drop duplicated -I*/-E* aflags
  MIPS: Fix -mabi=64 build of vdso.lds
  MIPS: Enable hardened usercopy
  MIPS: generic: Convert SEAD-3 to a generic board
  MIPS: generic: Introduce generic DT-based board support
  MIPS: Support generating Flattened Image Trees (.itb)
  MIPS: Adjust MIPS64 CAC_BASE to reflect Config.K0
  MIPS: Print CM error reports upon bus errors
  MIPS: Support per-device DMA coherence
  MIPS: dma-default: Don't check hw_coherentio if device is non-coherent
  MIPS: Sanitise coherentio semantics
  MIPS: PCI: Support generic drivers
  MIPS: PCI: Introduce CONFIG_PCI_DRIVERS_LEGACY
  MIPS: PCI: Split pci.c into pci.c & pci-legacy.c
  MIPS: PCI: Inline pcibios_assign_all_busses
  MIPS: PCI: Make pcibios_set_cache_line_size an initcall
  MIPS: PCI: Support for CONFIG_PCI_DOMAINS_GENERIC
  MIPS: PCI: Use struct list_head lists
  ...

1 files changed, 76 insertions, 1 deletions

diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index 598ab2930fce..fbf40d3c8123 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -262,7 +262,14 @@ KBUILD_CPPFLAGS += -DVMLINUX_LOAD_ADDRESS=$(load-y)
 KBUILD_CPPFLAGS += -DDATAOFFSET=$(if $(dataoffset-y),$(dataoffset-y),0)
 
 bootvars-y	= VMLINUX_LOAD_ADDRESS=$(load-y) \
-		  VMLINUX_ENTRY_ADDRESS=$(entry-y)
+		  VMLINUX_ENTRY_ADDRESS=$(entry-y) \
+		  PLATFORM=$(platform-y)
+ifdef CONFIG_32BIT
+bootvars-y	+= ADDR_BITS=32
+endif
+ifdef CONFIG_64BIT
+bootvars-y	+= ADDR_BITS=64
+endif
 
 LDFLAGS			+= -m $(ld-emul)
 
@@ -302,6 +309,11 @@ boot-y			+= uImage.gz
 boot-y			+= uImage.lzma
 boot-y			+= uImage.lzo
 endif
+boot-y			+= vmlinux.itb
+boot-y			+= vmlinux.gz.itb
+boot-y			+= vmlinux.bz2.itb
+boot-y			+= vmlinux.lzma.itb
+boot-y			+= vmlinux.lzo.itb
 
 # compressed boot image targets (arch/mips/boot/compressed/)
 bootz-y			:= vmlinuz
@@ -425,4 +437,67 @@ define archhelp
 	echo '  dtbs_install         - Install dtbs to $(INSTALL_DTBS_PATH)'
 	echo
 	echo '  These will be default as appropriate for a configured platform.'
+	echo
+	echo '  If you are targeting a system supported by generic kernels you may'
+	echo '  configure the kernel for a given architecture target like so:'
+	echo
+	echo '  {micro32,32,64}{r1,r2,r6}{el,}_defconfig <BOARDS="list of boards">'
+	echo
+	echo '  Otherwise, the following default configurations are available:'
 endef
+
+generic_config_dir = $(srctree)/arch/$(ARCH)/configs/generic
+generic_defconfigs :=
+
+#
+# If the user generates a generic kernel configuration without specifying a
+# list of boards to include the config fragments for, default to including all
+# available board config fragments.
+#
+ifeq ($(BOARDS),)
+BOARDS = $(patsubst board-%.config,%,$(notdir $(wildcard $(generic_config_dir)/board-*.config)))
+endif
+
+#
+# Generic kernel configurations which merge generic_defconfig with the
+# appropriate config fragments from arch/mips/configs/generic/, resulting in
+# the ability to easily configure the kernel for a given architecture,
+# endianness & set of boards without duplicating the needed configuration in
+# hundreds of defconfig files.
+#
+define gen_generic_defconfigs
+$(foreach bits,$(1),$(foreach rev,$(2),$(foreach endian,$(3),
+target := $(bits)$(rev)$(filter el,$(endian))_defconfig
+generic_defconfigs += $$(target)
+$$(target): $(generic_config_dir)/$(bits)$(rev).config
+$$(target): $(generic_config_dir)/$(endian).config
+)))
+endef
+
+$(eval $(call gen_generic_defconfigs,32 64,r1 r2 r6,eb el))
+$(eval $(call gen_generic_defconfigs,micro32,r2,eb el))
+
+.PHONY: $(generic_defconfigs)
+$(generic_defconfigs):
+	$(Q)$(CONFIG_SHELL) $(srctree)/scripts/kconfig/merge_config.sh \
+		-m -O $(objtree) $(srctree)/arch/$(ARCH)/configs/generic_defconfig $^ \
+		$(foreach board,$(BOARDS),$(generic_config_dir)/board-$(board).config)
+	$(Q)$(MAKE) olddefconfig
+
+#
+# Prevent generic merge_config rules attempting to merge single fragments
+#
+$(generic_config_dir)/%.config: ;
+
+#
+# Legacy defconfig compatibility - these targets used to be real defconfigs but
+# now that the boards have been converted to use the generic kernel they are
+# wrappers around the generic rules above.
+#
+.PHONY: sead3_defconfig
+sead3_defconfig:
+	$(Q)$(MAKE) 32r2el_defconfig BOARDS=sead-3
+
+.PHONY: sead3micro_defconfig
+sead3micro_defconfig:
+	$(Q)$(MAKE) micro32r2el_defconfig BOARDS=sead-3