Merge tag 'mips_5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux

Pull MIPS updates from Paul Burton:

 - Support for the MIPSr6 MemoryMapID register & Global INValidate TLB
   (GINVT) instructions, allowing for more efficient TLB maintenance
   when running on a CPU such as the I6500 that supports these.

 - Enable huge page support for MIPS64r6.

 - Optimize post-DMA cache sync by removing that code entirely for
   kernel configurations in which we know it won't be needed.

 - The number of pages allocated for interrupt stacks is now calculated
   correctly, where before we would wastefully allocate too much memory
   in some configurations.

 - The ath79 platform migrates to devicetree.

 - The bcm47xx platform sees fixes for the Buffalo WHR-G54S board.

 - The ingenic/jz4740 platform gains support for appended devicetrees.

 - The cavium_octeon, lantiq, loongson32 & sgi-ip27 platforms all see
   cleanups as do various pieces of core architecture code.

* tag 'mips_5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (66 commits)
  MIPS: lantiq: Remove separate GPHY Firmware loader
  MIPS: ingenic: Add support for appended devicetree
  MIPS: SGI-IP27: rework HUB interrupts
  MIPS: SGI-IP27: do boot CPU init later
  MIPS: SGI-IP27: do xtalk scanning later
  MIPS: SGI-IP27: use pr_info/pr_emerg and pr_cont to fix output
  MIPS: SGI-IP27: clean up bridge access and header files
  MIPS: SGI-IP27: get rid of volatile and hubreg_t
  MIPS: irq: Allocate accurate order pages for irq stack
  MIPS: dma-noncoherent: Remove bogus condition in dma_sync_phys()
  MIPS: eBPF: Remove REG_32BIT_ZERO_EX
  MIPS: eBPF: Always return sign extended 32b values
  MIPS: CM: Fix indentation
  MIPS: BCM47XX: Fix/improve Buffalo WHR-G54S support
  MIPS: OCTEON: program rx/tx-delay always from DT
  MIPS: OCTEON: delete board-specific link status
  MIPS: OCTEON: don't lie about interface type of CN3005 board
  MIPS: OCTEON: warn if deprecated link status is being used
  MIPS: OCTEON: add fixed-link nodes to in-kernel device tree
  MIPS: Delete unused flush_cache_sigtramp()
  ...

1 files changed, 0 insertions, 92 deletions

diff --git a/arch/mips/ath79/mach-ap121.c b/arch/mips/ath79/mach-ap121.c
deleted file mode 100644
index 1bf73f2a069d..000000000000
--- a/arch/mips/ath79/mach-ap121.c
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
- *  Atheros AP121 board support
- *
- *  Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- */
-
-#include "machtypes.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-spi.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-
-#define AP121_GPIO_LED_WLAN		0
-#define AP121_GPIO_LED_USB		1
-
-#define AP121_GPIO_BTN_JUMPSTART	11
-#define AP121_GPIO_BTN_RESET		12
-
-#define AP121_KEYS_POLL_INTERVAL	20	/* msecs */
-#define AP121_KEYS_DEBOUNCE_INTERVAL	(3 * AP121_KEYS_POLL_INTERVAL)
-
-#define AP121_CAL_DATA_ADDR	0x1fff1000
-
-static struct gpio_led ap121_leds_gpio[] __initdata = {
-	{
-		.name		= "ap121:green:usb",
-		.gpio		= AP121_GPIO_LED_USB,
-		.active_low	= 0,
-	},
-	{
-		.name		= "ap121:green:wlan",
-		.gpio		= AP121_GPIO_LED_WLAN,
-		.active_low	= 0,
-	},
-};
-
-static struct gpio_keys_button ap121_gpio_keys[] __initdata = {
-	{
-		.desc		= "jumpstart button",
-		.type		= EV_KEY,
-		.code		= KEY_WPS_BUTTON,
-		.debounce_interval = AP121_KEYS_DEBOUNCE_INTERVAL,
-		.gpio		= AP121_GPIO_BTN_JUMPSTART,
-		.active_low	= 1,
-	},
-	{
-		.desc		= "reset button",
-		.type		= EV_KEY,
-		.code		= KEY_RESTART,
-		.debounce_interval = AP121_KEYS_DEBOUNCE_INTERVAL,
-		.gpio		= AP121_GPIO_BTN_RESET,
-		.active_low	= 1,
-	}
-};
-
-static struct spi_board_info ap121_spi_info[] = {
-	{
-		.bus_num	= 0,
-		.chip_select	= 0,
-		.max_speed_hz	= 25000000,
-		.modalias	= "mx25l1606e",
-	}
-};
-
-static struct ath79_spi_platform_data ap121_spi_data = {
-	.bus_num	= 0,
-	.num_chipselect = 1,
-};
-
-static void __init ap121_setup(void)
-{
-	u8 *cal_data = (u8 *) KSEG1ADDR(AP121_CAL_DATA_ADDR);
-
-	ath79_register_leds_gpio(-1, ARRAY_SIZE(ap121_leds_gpio),
-				 ap121_leds_gpio);
-	ath79_register_gpio_keys_polled(-1, AP121_KEYS_POLL_INTERVAL,
-					ARRAY_SIZE(ap121_gpio_keys),
-					ap121_gpio_keys);
-
-	ath79_register_spi(&ap121_spi_data, ap121_spi_info,
-			   ARRAY_SIZE(ap121_spi_info));
-	ath79_register_usb();
-	ath79_register_wmac(cal_data);
-}
-
-MIPS_MACHINE(ATH79_MACH_AP121, "AP121", "Atheros AP121 reference board",
-	     ap121_setup);