Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

Pull MIPS updates from Ralf Baechle:
 "This is the main MIPS pull request for 4.9:

  MIPS core arch code:
   - traps: 64bit kernels should read CP0_EBase 64bit
   - traps: Convert ebase to KSEG0
   - c-r4k: Drop bc_wback_inv() from icache flush
   - c-r4k: Split user/kernel flush_icache_range()
   - cacheflush: Use __flush_icache_user_range()
   - uprobes: Flush icache via kernel address
   - KVM: Use __local_flush_icache_user_range()
   - c-r4k: Fix flush_icache_range() for EVA
   - Fix -mabi=64 build of vdso.lds
   - VDSO: Drop duplicated -I*/-E* aflags
   - tracing: move insn_has_delay_slot to a shared header
   - tracing: disable uprobe/kprobe on compact branch instructions
   - ptrace: Fix regs_return_value for kernel context
   - Squash lines for simple wrapper functions
   - Move identification of VP(E) into proc.c from smp-mt.c
   - Add definitions of SYNC barrierstype values
   - traps: Ensure full EBase is written
   - tlb-r4k: If there are wired entries, don't use TLBINVF
   - Sanitise coherentio semantics
   - dma-default: Don't check hw_coherentio if device is non-coherent
   - Support per-device DMA coherence
   - Adjust MIPS64 CAC_BASE to reflect Config.K0
   - Support generating Flattened Image Trees (.itb)
   - generic: Introduce generic DT-based board support
   - generic: Convert SEAD-3 to a generic board
   - Enable hardened usercopy
   - Don't specify STACKPROTECTOR in defconfigs

  Octeon:
   - Delete dead code and files across the platform.
   - Change to use all memory into use by default.
   - Rename upper case variables in setup code to lowercase.
   - Delete legacy hack for broken bootloaders.
   - Leave maintaining the link state to the actual ethernet/PHY drivers.
   - Add DTS for D-Link DSR-500N.
   - Fix PCI interrupt routing on D-Link DSR-500N.

  Pistachio:
   - Remove ANDROID_TIMED_OUTPUT from defconfig

  TX39xx:
   - Move GPIO setup from .mem_setup() to .arch_init()
   - Convert to Common Clock Framework

  TX49xx:
   - Move GPIO setup from .mem_setup() to .arch_init()
   - Convert to Common Clock Framework

  txx9wdt:
   - Add missing clock (un)prepare calls for CCF

  BMIPS:
   - Add PW, GPIO SDHCI and NAND device node names
   - Support APPENDED_DTB
   - Add missing bcm97435svmb to DT_NONE
   - Rename bcm96358nb4ser to bcm6358-neufbox4-sercom
   - Add DT examples for BCM63268, BCM3368 and BCM6362
   - Add support for BCM3368 and BCM6362

  PCI
   - Reduce stack frame usage
   - Use struct list_head lists
   - Support for CONFIG_PCI_DOMAINS_GENERIC
   - Make pcibios_set_cache_line_size an initcall
   - Inline pcibios_assign_all_busses
   - Split pci.c into pci.c & pci-legacy.c
   - Introduce CONFIG_PCI_DRIVERS_LEGACY
   - Support generic drivers

  CPC
   - Convert bare 'unsigned' to 'unsigned int'
   - Avoid lock when MIPS CM >= 3 is present

  GIC:
   - Delete unused file smp-gic.c

  mt7620:
   - Delete unnecessary assignment for the field "owner" from PCI

  BCM63xx:
   - Let clk_disable() return immediately if clk is NULL

  pm-cps:
   - Change FSB workaround to CPU blacklist
   - Update comments on barrier instructions
   - Use MIPS standard lightweight ordering barrier
   - Use MIPS standard completion barrier
   - Remove selection of sync types
   - Add MIPSr6 CPU support
   - Support CM3 changes to Coherence Enable Register

  SMP:
   - Wrap call to mips_cpc_lock_other in mips_cm_lock_other
   - Introduce mechanism for freeing and allocating IPIs

  cpuidle:
   - cpuidle-cps: Enable use with MIPSr6 CPUs.

  SEAD3:
   - Rewrite to use DT and generic kernel feature.

  USB:
   - host: ehci-sead3: Remove SEAD-3 EHCI code

  FBDEV:
   - cobalt_lcdfb: Drop SEAD3 support

  dt-bindings:
   -  Document a binding for simple ASCII LCDs

  auxdisplay:
   - img-ascii-lcd: driver for simple ASCII LCD displays

  irqchip i8259:
   - i8259: Add domain before mapping parent irq
   - i8259: Allow platforms to override poll function
   - i8259: Remove unused i8259A_irq_pending

  Malta:
   - Rewrite to use DT

  of/platform:
   - Probe "isa" busses by default

  CM:
   - Print CM error reports upon bus errors

  Module:
   - Migrate exception table users off module.h and onto extable.h
   - Make various drivers explicitly non-modular:
   - Audit and remove any unnecessary uses of module.h

  mailmap:
   - Canonicalize to Qais' current email address.

  Documentation:
   - MIPS supports HAVE_REGS_AND_STACK_ACCESS_API

  Loongson1C:
   - Add CPU support for Loongson1C
   - Add board support
   - Add defconfig
   - Add RTC support for Loongson1C board

  All this except one Documentation fix has sat in linux-next and has
  survived Imagination's automated build test system"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (127 commits)
  Documentation: MIPS supports HAVE_REGS_AND_STACK_ACCESS_API
  MIPS: ptrace: Fix regs_return_value for kernel context
  MIPS: VDSO: Drop duplicated -I*/-E* aflags
  MIPS: Fix -mabi=64 build of vdso.lds
  MIPS: Enable hardened usercopy
  MIPS: generic: Convert SEAD-3 to a generic board
  MIPS: generic: Introduce generic DT-based board support
  MIPS: Support generating Flattened Image Trees (.itb)
  MIPS: Adjust MIPS64 CAC_BASE to reflect Config.K0
  MIPS: Print CM error reports upon bus errors
  MIPS: Support per-device DMA coherence
  MIPS: dma-default: Don't check hw_coherentio if device is non-coherent
  MIPS: Sanitise coherentio semantics
  MIPS: PCI: Support generic drivers
  MIPS: PCI: Introduce CONFIG_PCI_DRIVERS_LEGACY
  MIPS: PCI: Split pci.c into pci.c & pci-legacy.c
  MIPS: PCI: Inline pcibios_assign_all_busses
  MIPS: PCI: Make pcibios_set_cache_line_size an initcall
  MIPS: PCI: Support for CONFIG_PCI_DOMAINS_GENERIC
  MIPS: PCI: Use struct list_head lists
  ...

1 files changed, 56 insertions, 9 deletions

diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c
index b0baf48951fa..7ebb1918e2ac 100644
--- a/arch/mips/kernel/smp.c
+++ b/arch/mips/kernel/smp.c
@@ -25,7 +25,7 @@
 #include <linux/smp.h>
 #include <linux/spinlock.h>
 #include <linux/threads.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/time.h>
 #include <linux/timex.h>
 #include <linux/sched.h>
@@ -192,9 +192,11 @@ void mips_smp_send_ipi_mask(const struct cpumask *mask, unsigned int action)
 				continue;
 
 			while (!cpumask_test_cpu(cpu, &cpu_coherent_mask)) {
+				mips_cm_lock_other(core, 0);
 				mips_cpc_lock_other(core);
 				write_cpc_co_cmd(CPC_Cx_CMD_PWRUP);
 				mips_cpc_unlock_other();
+				mips_cm_unlock_other();
 			}
 		}
 	}
@@ -229,7 +231,7 @@ static struct irqaction irq_call = {
 	.name		= "IPI call"
 };
 
-static __init void smp_ipi_init_one(unsigned int virq,
+static void smp_ipi_init_one(unsigned int virq,
 				    struct irqaction *action)
 {
 	int ret;
@@ -239,9 +241,11 @@ static __init void smp_ipi_init_one(unsigned int virq,
 	BUG_ON(ret);
 }
 
-static int __init mips_smp_ipi_init(void)
+static unsigned int call_virq, sched_virq;
+
+int mips_smp_ipi_allocate(const struct cpumask *mask)
 {
-	unsigned int call_virq, sched_virq;
+	int virq;
 	struct irq_domain *ipidomain;
 	struct device_node *node;
 
@@ -268,16 +272,20 @@ static int __init mips_smp_ipi_init(void)
 	if (!ipidomain)
 		return 0;
 
-	call_virq = irq_reserve_ipi(ipidomain, cpu_possible_mask);
-	BUG_ON(!call_virq);
+	virq = irq_reserve_ipi(ipidomain, mask);
+	BUG_ON(!virq);
+	if (!call_virq)
+		call_virq = virq;
 
-	sched_virq = irq_reserve_ipi(ipidomain, cpu_possible_mask);
-	BUG_ON(!sched_virq);
+	virq = irq_reserve_ipi(ipidomain, mask);
+	BUG_ON(!virq);
+	if (!sched_virq)
+		sched_virq = virq;
 
 	if (irq_domain_is_ipi_per_cpu(ipidomain)) {
 		int cpu;
 
-		for_each_cpu(cpu, cpu_possible_mask) {
+		for_each_cpu(cpu, mask) {
 			smp_ipi_init_one(call_virq + cpu, &irq_call);
 			smp_ipi_init_one(sched_virq + cpu, &irq_resched);
 		}
@@ -286,6 +294,45 @@ static int __init mips_smp_ipi_init(void)
 		smp_ipi_init_one(sched_virq, &irq_resched);
 	}
 
+	return 0;
+}
+
+int mips_smp_ipi_free(const struct cpumask *mask)
+{
+	struct irq_domain *ipidomain;
+	struct device_node *node;
+
+	node = of_irq_find_parent(of_root);
+	ipidomain = irq_find_matching_host(node, DOMAIN_BUS_IPI);
+
+	/*
+	 * Some platforms have half DT setup. So if we found irq node but
+	 * didn't find an ipidomain, try to search for one that is not in the
+	 * DT.
+	 */
+	if (node && !ipidomain)
+		ipidomain = irq_find_matching_host(NULL, DOMAIN_BUS_IPI);
+
+	BUG_ON(!ipidomain);
+
+	if (irq_domain_is_ipi_per_cpu(ipidomain)) {
+		int cpu;
+
+		for_each_cpu(cpu, mask) {
+			remove_irq(call_virq + cpu, &irq_call);
+			remove_irq(sched_virq + cpu, &irq_resched);
+		}
+	}
+	irq_destroy_ipi(call_virq, mask);
+	irq_destroy_ipi(sched_virq, mask);
+	return 0;
+}
+
+
+static int __init mips_smp_ipi_init(void)
+{
+	mips_smp_ipi_allocate(cpu_possible_mask);
+
 	call_desc = irq_to_desc(call_virq);
 	sched_desc = irq_to_desc(sched_virq);