Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

Pull MIPS updates from Ralf Baechle:

 o Add basic support for the Mediatek/Ralink Wireless SoC family.

 o The Qualcomm Atheros platform is extended by support for the new
   QCA955X SoC series as well as a bunch of patches that get the code
   ready for OF support.

 o Lantiq and BCM47XX platform have a few improvements and bug fixes.

 o MIPS has sent a few patches that get the kernel ready for the
   upcoming microMIPS support.

 o The rest of the series is made up of small bug fixes and cleanups
   that relate to various parts of the MIPS code.  The biggy in there is
   a whitespace cleanup.  After I was sent another set of whitespace
   cleanup patches I decided it was the time to clean the whitespace
   "issues" for once and and that touches many files below arch/mips/.

Fix up silly conflicts, mostly due to whitespace cleanups.

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (105 commits)
  MIPS: Quit exporting kernel internel break codes to uapi/asm/break.h
  MIPS: remove broken conditional inside vpe loader code
  MIPS: SMTC: fix implicit declaration of set_vi_handler
  MIPS: early_printk: drop __init annotations
  MIPS: Probe for and report hardware virtualization support.
  MIPS: ath79: add support for the Qualcomm Atheros AP136-010 board
  MIPS: ath79: add USB controller registration code for the QCA955X SoCs
  MIPS: ath79: add PCI controller registration code for the QCA955X SoCs
  MIPS: ath79: add WMAC registration code for the QCA955X SoCs
  MIPS: ath79: register UART for the QCA955X SoCs
  MIPS: ath79: add QCA955X specific glue to ath79_device_reset_{set, clear}
  MIPS: ath79: add GPIO setup code for the QCA955X SoCs
  MIPS: ath79: add IRQ handling code for the QCA955X SoCs
  MIPS: ath79: add clock setup code for the QCA955X SoCs
  MIPS: ath79: add SoC detection code for the QCA955X SoCs
  MIPS: ath79: add early printk support for the QCA955X SoCs
  MIPS: ath79: fix WMAC IRQ resource assignment
  mips: reserve elfcorehdr
  mips: Make sure kernel memory is in iomem
  MIPS: ath79: use dynamically allocated USB platform devices
  ...

1 files changed, 17 insertions, 17 deletions

diff --git a/arch/mips/pnx833x/common/platform.c b/arch/mips/pnx833x/common/platform.c
index 05a1d922cd60..d22dc0d6f289 100644
--- a/arch/mips/pnx833x/common/platform.c
+++ b/arch/mips/pnx833x/common/platform.c
@@ -6,7 +6,7 @@
  *    Daniel Laird <daniel.j.laird@nxp.com>
  *
  *  Based on software written by:
- *      Nikita Youshchenko <yoush@debian.org>, based on PNX8550 code.
+ *	Nikita Youshchenko <yoush@debian.org>, based on PNX8550 code.
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
@@ -42,7 +42,7 @@
 #include <irq-mapping.h>
 #include <pnx833x.h>
 
-static u64 uart_dmamask     = DMA_BIT_MASK(32);
+static u64 uart_dmamask	    = DMA_BIT_MASK(32);
 
 static struct resource pnx833x_uart_resources[] = {
 	[0] = {
@@ -69,7 +69,7 @@ static struct resource pnx833x_uart_resources[] = {
 
 struct pnx8xxx_port pnx8xxx_ports[] = {
 	[0] = {
-		.port   = {
+		.port	= {
 			.type		= PORT_PNX8XXX,
 			.iotype		= UPIO_MEM,
 			.membase	= (void __iomem *)PNX833X_UART0_PORTS_START,
@@ -82,7 +82,7 @@ struct pnx8xxx_port pnx8xxx_ports[] = {
 		},
 	},
 	[1] = {
-		.port   = {
+		.port	= {
 			.type		= PORT_PNX8XXX,
 			.iotype		= UPIO_MEM,
 			.membase	= (void __iomem *)PNX833X_UART1_PORTS_START,
@@ -108,7 +108,7 @@ static struct platform_device pnx833x_uart_device = {
 	.resource	= pnx833x_uart_resources,
 };
 
-static u64 ehci_dmamask     = DMA_BIT_MASK(32);
+static u64 ehci_dmamask	    = DMA_BIT_MASK(32);
 
 static struct resource pnx833x_usb_ehci_resources[] = {
 	[0] = {
@@ -183,7 +183,7 @@ static struct platform_device pnx833x_i2c0_device = {
 	.dev = {
 		.platform_data = &pnx833x_i2c_dev[0],
 	},
-	.num_resources  = ARRAY_SIZE(pnx833x_i2c0_resources),
+	.num_resources	= ARRAY_SIZE(pnx833x_i2c0_resources),
 	.resource	= pnx833x_i2c0_resources,
 };
 
@@ -193,7 +193,7 @@ static struct platform_device pnx833x_i2c1_device = {
 	.dev = {
 		.platform_data = &pnx833x_i2c_dev[1],
 	},
-	.num_resources  = ARRAY_SIZE(pnx833x_i2c1_resources),
+	.num_resources	= ARRAY_SIZE(pnx833x_i2c1_resources),
 	.resource	= pnx833x_i2c1_resources,
 };
 #endif
@@ -217,7 +217,7 @@ static struct platform_device pnx833x_ethernet_device = {
 	.name = "ip3902-eth",
 	.id   = -1,
 	.dev  = {
-		.dma_mask          = &ethernet_dmamask,
+		.dma_mask	   = &ethernet_dmamask,
 		.coherent_dma_mask = DMA_BIT_MASK(32),
 	},
 	.num_resources = ARRAY_SIZE(pnx833x_ethernet_resources),
@@ -238,8 +238,8 @@ static struct resource pnx833x_sata_resources[] = {
 };
 
 static struct platform_device pnx833x_sata_device = {
-	.name          = "pnx833x-sata",
-	.id            = -1,
+	.name	       = "pnx833x-sata",
+	.id	       = -1,
 	.num_resources = ARRAY_SIZE(pnx833x_sata_resources),
 	.resource      = pnx833x_sata_resources,
 };
@@ -265,7 +265,7 @@ static struct platform_nand_data pnx833x_flash_nand_data = {
 		.chip_delay		= 25,
 	},
 	.ctrl = {
-		.cmd_ctrl 		= pnx833x_flash_nand_cmd_ctrl
+		.cmd_ctrl		= pnx833x_flash_nand_cmd_ctrl
 	}
 };
 
@@ -274,17 +274,17 @@ static struct platform_nand_data pnx833x_flash_nand_data = {
  * 12 bytes more seems to be the standard that allows for NAND access.
  */
 static struct resource pnx833x_flash_nand_resource = {
-	.start 	= PNX8335_NAND_BASE,
-	.end 	= PNX8335_NAND_BASE + 12,
-	.flags 	= IORESOURCE_MEM,
+	.start	= PNX8335_NAND_BASE,
+	.end	= PNX8335_NAND_BASE + 12,
+	.flags	= IORESOURCE_MEM,
 };
 
 static struct platform_device pnx833x_flash_nand = {
-	.name	        = "gen_nand",
-	.id		        = -1,
+	.name		= "gen_nand",
+	.id			= -1,
 	.num_resources	= 1,
 	.resource	    = &pnx833x_flash_nand_resource,
-	.dev            = {
+	.dev		= {
 		.platform_data = &pnx833x_flash_nand_data,
 	},
 };