[MIPS] Add bcm1480 ZBus trace support, fix wait related bugs

Make ZBus tracing generic - moving it to a common direcotry under
arch/mips/sibyte, add bcm1480 support and fix some wait related
bugs (thanks to Ralf for assistance on that).

Signed-off-by: Mark Mason <mason@broadcom.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

2 files changed, 0 insertions, 572 deletions

diff --git a/arch/mips/sibyte/sb1250/Makefile b/arch/mips/sibyte/sb1250/Makefile
index 04c0f1a7f616..df662c61473a 100644
--- a/arch/mips/sibyte/sb1250/Makefile
+++ b/arch/mips/sibyte/sb1250/Makefile
@@ -1,6 +1,5 @@
 obj-y := setup.o irq.o time.o
 
 obj-$(CONFIG_SMP)			+= smp.o
-obj-$(CONFIG_SIBYTE_TBPROF)		+= bcm1250_tbprof.o
 obj-$(CONFIG_SIBYTE_STANDALONE)		+= prom.o
 obj-$(CONFIG_SIBYTE_BUS_WATCHER)	+= bus_watcher.o
diff --git a/arch/mips/sibyte/sb1250/bcm1250_tbprof.c b/arch/mips/sibyte/sb1250/bcm1250_tbprof.c
deleted file mode 100644
index ea0ca131a3cf..000000000000
--- a/arch/mips/sibyte/sb1250/bcm1250_tbprof.c
+++ /dev/null
@@ -1,571 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- *
- * Copyright (C) 2001, 2002, 2003 Broadcom Corporation
- * Copyright (C) 2007 Ralf Baechle <ralf@linux-mips.org>
- * Copyright (C) 2007 MIPS Technologies, Inc.
- *    written by Ralf Baechle <ralf@linux-mips.org>
- */
-
-#undef DEBUG
-
-#include <linux/device.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/slab.h>
-#include <linux/vmalloc.h>
-#include <linux/fs.h>
-#include <linux/errno.h>
-#include <linux/types.h>
-#include <linux/wait.h>
-
-#include <asm/io.h>
-#include <asm/sibyte/sb1250.h>
-#include <asm/sibyte/sb1250_regs.h>
-#include <asm/sibyte/sb1250_scd.h>
-#include <asm/sibyte/sb1250_int.h>
-#include <asm/system.h>
-#include <asm/uaccess.h>
-
-#define SBPROF_TB_MAJOR 240
-
-typedef u64 tb_sample_t[6*256];
-
-enum open_status {
-	SB_CLOSED,
-	SB_OPENING,
-	SB_OPEN
-};
-
-struct sbprof_tb {
-	wait_queue_head_t	tb_sync;
-	wait_queue_head_t	tb_read;
-	struct mutex		lock;
-	enum open_status	open;
-	tb_sample_t		*sbprof_tbbuf;
-	int			next_tb_sample;
-
-	volatile int		tb_enable;
-	volatile int		tb_armed;
-
-};
-
-static struct sbprof_tb sbp;
-
-#define MAX_SAMPLE_BYTES (24*1024*1024)
-#define MAX_TBSAMPLE_BYTES (12*1024*1024)
-
-#define MAX_SAMPLES (MAX_SAMPLE_BYTES/sizeof(u_int32_t))
-#define TB_SAMPLE_SIZE (sizeof(tb_sample_t))
-#define MAX_TB_SAMPLES (MAX_TBSAMPLE_BYTES/TB_SAMPLE_SIZE)
-
-/* ioctls */
-#define SBPROF_ZBSTART		_IOW('s', 0, int)
-#define SBPROF_ZBSTOP		_IOW('s', 1, int)
-#define SBPROF_ZBWAITFULL	_IOW('s', 2, int)
-
-/*
- * Routines for using 40-bit SCD cycle counter
- *
- * Client responsible for either handling interrupts or making sure
- * the cycles counter never saturates, e.g., by doing
- * zclk_timer_init(0) at least every 2^40 - 1 ZCLKs.
- */
-
-/*
- * Configures SCD counter 0 to count ZCLKs starting from val;
- * Configures SCD counters1,2,3 to count nothing.
- * Must not be called while gathering ZBbus profiles.
- */
-
-#define zclk_timer_init(val) \
-  __asm__ __volatile__ (".set push;" \
-			".set mips64;" \
-			"la   $8, 0xb00204c0;" /* SCD perf_cnt_cfg */ \
-			"sd   %0, 0x10($8);"   /* write val to counter0 */ \
-			"sd   %1, 0($8);"      /* config counter0 for zclks*/ \
-			".set pop" \
-			: /* no outputs */ \
-						     /* enable, counter0 */ \
-			: /* inputs */ "r"(val), "r" ((1ULL << 33) | 1ULL) \
-			: /* modifies */ "$8" )
-
-
-/* Reads SCD counter 0 and puts result in value
-   unsigned long long val; */
-#define zclk_get(val) \
-  __asm__ __volatile__ (".set push;" \
-			".set mips64;" \
-			"la   $8, 0xb00204c0;" /* SCD perf_cnt_cfg */ \
-			"ld   %0, 0x10($8);"   /* write val to counter0 */ \
-			".set pop" \
-			: /* outputs */ "=r"(val) \
-			: /* inputs */ \
-			: /* modifies */ "$8" )
-
-#define DEVNAME "bcm1250_tbprof"
-
-#define TB_FULL (sbp.next_tb_sample == MAX_TB_SAMPLES)
-
-/*
- * Support for ZBbus sampling using the trace buffer
- *
- * We use the SCD performance counter interrupt, caused by a Zclk counter
- * overflow, to trigger the start of tracing.
- *
- * We set the trace buffer to sample everything and freeze on
- * overflow.
- *
- * We map the interrupt for trace_buffer_freeze to handle it on CPU 0.
- */
-
-static u64 tb_period;
-
-static void arm_tb(void)
-{
-        u64 scdperfcnt;
-	u64 next = (1ULL << 40) - tb_period;
-	u64 tb_options = M_SCD_TRACE_CFG_FREEZE_FULL;
-
-	/*
-	 * Generate an SCD_PERFCNT interrupt in TB_PERIOD Zclks to trigger
-	 *start of trace.  XXX vary sampling period
-	 */
-	__raw_writeq(0, IOADDR(A_SCD_PERF_CNT_1));
-	scdperfcnt = __raw_readq(IOADDR(A_SCD_PERF_CNT_CFG));
-
-	/*
-	 * Unfortunately, in Pass 2 we must clear all counters to knock down a
-	 * previous interrupt request.  This means that bus profiling requires
-	 * ALL of the SCD perf counters.
-	 */
-	__raw_writeq((scdperfcnt & ~M_SPC_CFG_SRC1) |
-						/* keep counters 0,2,3 as is */
-		     M_SPC_CFG_ENABLE |		/* enable counting */
-		     M_SPC_CFG_CLEAR |		/* clear all counters */
-		     V_SPC_CFG_SRC1(1),		/* counter 1 counts cycles */
-		     IOADDR(A_SCD_PERF_CNT_CFG));
-	__raw_writeq(next, IOADDR(A_SCD_PERF_CNT_1));
-
-	/* Reset the trace buffer */
-	__raw_writeq(M_SCD_TRACE_CFG_RESET, IOADDR(A_SCD_TRACE_CFG));
-#if 0 && defined(M_SCD_TRACE_CFG_FORCECNT)
-	/* XXXKW may want to expose control to the data-collector */
-	tb_options |= M_SCD_TRACE_CFG_FORCECNT;
-#endif
-	__raw_writeq(tb_options, IOADDR(A_SCD_TRACE_CFG));
-	sbp.tb_armed = 1;
-}
-
-static irqreturn_t sbprof_tb_intr(int irq, void *dev_id)
-{
-	int i;
-
-	pr_debug(DEVNAME ": tb_intr\n");
-
-	if (sbp.next_tb_sample < MAX_TB_SAMPLES) {
-		/* XXX should use XKPHYS to make writes bypass L2 */
-		u64 *p = sbp.sbprof_tbbuf[sbp.next_tb_sample++];
-		/* Read out trace */
-		__raw_writeq(M_SCD_TRACE_CFG_START_READ,
-			     IOADDR(A_SCD_TRACE_CFG));
-		__asm__ __volatile__ ("sync" : : : "memory");
-		/* Loop runs backwards because bundles are read out in reverse order */
-		for (i = 256 * 6; i > 0; i -= 6) {
-			/* Subscripts decrease to put bundle in the order */
-			/*   t0 lo, t0 hi, t1 lo, t1 hi, t2 lo, t2 hi */
-			p[i - 1] = __raw_readq(IOADDR(A_SCD_TRACE_READ));
-								/* read t2 hi */
-			p[i - 2] = __raw_readq(IOADDR(A_SCD_TRACE_READ));
-								/* read t2 lo */
-			p[i - 3] = __raw_readq(IOADDR(A_SCD_TRACE_READ));
-								/* read t1 hi */
-			p[i - 4] = __raw_readq(IOADDR(A_SCD_TRACE_READ));
-								/* read t1 lo */
-			p[i - 5] = __raw_readq(IOADDR(A_SCD_TRACE_READ));
-								/* read t0 hi */
-			p[i - 6] = __raw_readq(IOADDR(A_SCD_TRACE_READ));
-								/* read t0 lo */
-		}
-		if (!sbp.tb_enable) {
-			pr_debug(DEVNAME ": tb_intr shutdown\n");
-			__raw_writeq(M_SCD_TRACE_CFG_RESET,
-				     IOADDR(A_SCD_TRACE_CFG));
-			sbp.tb_armed = 0;
-			wake_up(&sbp.tb_sync);
-		} else {
-			arm_tb();	/* knock down current interrupt and get another one later */
-		}
-	} else {
-		/* No more trace buffer samples */
-		pr_debug(DEVNAME ": tb_intr full\n");
-		__raw_writeq(M_SCD_TRACE_CFG_RESET, IOADDR(A_SCD_TRACE_CFG));
-		sbp.tb_armed = 0;
-		if (!sbp.tb_enable) {
-			wake_up(&sbp.tb_sync);
-		}
-		wake_up(&sbp.tb_read);
-	}
-
-	return IRQ_HANDLED;
-}
-
-static irqreturn_t sbprof_pc_intr(int irq, void *dev_id)
-{
-	printk(DEVNAME ": unexpected pc_intr");
-	return IRQ_NONE;
-}
-
-/*
- * Requires: Already called zclk_timer_init with a value that won't
- *           saturate 40 bits.  No subsequent use of SCD performance counters
- *           or trace buffer.
- */
-
-static int sbprof_zbprof_start(struct file *filp)
-{
-	u64 scdperfcnt;
-	int err;
-
-	if (xchg(&sbp.tb_enable, 1))
-		return -EBUSY;
-
-	pr_debug(DEVNAME ": starting\n");
-
-	sbp.next_tb_sample = 0;
-	filp->f_pos = 0;
-
-	err = request_irq(K_INT_TRACE_FREEZE, sbprof_tb_intr, 0,
-	                DEVNAME " trace freeze", &sbp);
-	if (err)
-		return -EBUSY;
-
-	/* Make sure there isn't a perf-cnt interrupt waiting */
-	scdperfcnt = __raw_readq(IOADDR(A_SCD_PERF_CNT_CFG));
-	/* Disable and clear counters, override SRC_1 */
-	__raw_writeq((scdperfcnt & ~(M_SPC_CFG_SRC1 | M_SPC_CFG_ENABLE)) |
-		     M_SPC_CFG_ENABLE | M_SPC_CFG_CLEAR | V_SPC_CFG_SRC1(1),
-		     IOADDR(A_SCD_PERF_CNT_CFG));
-
-	/*
-	 * We grab this interrupt to prevent others from trying to use it, even
-	 * though we don't want to service the interrupts (they only feed into
-	 * the trace-on-interrupt mechanism)
-	 */
-	err = request_irq(K_INT_PERF_CNT, sbprof_pc_intr, 0,
-	                DEVNAME " scd perfcnt", &sbp);
-	if (err)
-		goto out_free_irq;
-
-	/*
-	 * I need the core to mask these, but the interrupt mapper to pass them
-	 * through.  I am exploiting my knowledge that cp0_status masks out
-	 * IP[5]. krw
-	 */
-	__raw_writeq(K_INT_MAP_I3,
-		     IOADDR(A_IMR_REGISTER(0, R_IMR_INTERRUPT_MAP_BASE) +
-			    (K_INT_PERF_CNT << 3)));
-
-	/* Initialize address traps */
-	__raw_writeq(0, IOADDR(A_ADDR_TRAP_UP_0));
-	__raw_writeq(0, IOADDR(A_ADDR_TRAP_UP_1));
-	__raw_writeq(0, IOADDR(A_ADDR_TRAP_UP_2));
-	__raw_writeq(0, IOADDR(A_ADDR_TRAP_UP_3));
-
-	__raw_writeq(0, IOADDR(A_ADDR_TRAP_DOWN_0));
-	__raw_writeq(0, IOADDR(A_ADDR_TRAP_DOWN_1));
-	__raw_writeq(0, IOADDR(A_ADDR_TRAP_DOWN_2));
-	__raw_writeq(0, IOADDR(A_ADDR_TRAP_DOWN_3));
-
-	__raw_writeq(0, IOADDR(A_ADDR_TRAP_CFG_0));
-	__raw_writeq(0, IOADDR(A_ADDR_TRAP_CFG_1));
-	__raw_writeq(0, IOADDR(A_ADDR_TRAP_CFG_2));
-	__raw_writeq(0, IOADDR(A_ADDR_TRAP_CFG_3));
-
-	/* Initialize Trace Event 0-7 */
-	/*				when interrupt */
-	__raw_writeq(M_SCD_TREVT_INTERRUPT, IOADDR(A_SCD_TRACE_EVENT_0));
-	__raw_writeq(0, IOADDR(A_SCD_TRACE_EVENT_1));
-	__raw_writeq(0, IOADDR(A_SCD_TRACE_EVENT_2));
-	__raw_writeq(0, IOADDR(A_SCD_TRACE_EVENT_3));
-	__raw_writeq(0, IOADDR(A_SCD_TRACE_EVENT_4));
-	__raw_writeq(0, IOADDR(A_SCD_TRACE_EVENT_5));
-	__raw_writeq(0, IOADDR(A_SCD_TRACE_EVENT_6));
-	__raw_writeq(0, IOADDR(A_SCD_TRACE_EVENT_7));
-
-	/* Initialize Trace Sequence 0-7 */
-	/*				     Start on event 0 (interrupt) */
-	__raw_writeq(V_SCD_TRSEQ_FUNC_START | 0x0fff,
-		     IOADDR(A_SCD_TRACE_SEQUENCE_0));
-	/*			  dsamp when d used | asamp when a used */
-	__raw_writeq(M_SCD_TRSEQ_ASAMPLE | M_SCD_TRSEQ_DSAMPLE |
-		     K_SCD_TRSEQ_TRIGGER_ALL,
-		     IOADDR(A_SCD_TRACE_SEQUENCE_1));
-	__raw_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_2));
-	__raw_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_3));
-	__raw_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_4));
-	__raw_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_5));
-	__raw_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_6));
-	__raw_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_7));
-
-	/* Now indicate the PERF_CNT interrupt as a trace-relevant interrupt */
-	__raw_writeq(1ULL << K_INT_PERF_CNT,
-		     IOADDR(A_IMR_REGISTER(0, R_IMR_INTERRUPT_TRACE)));
-
-	arm_tb();
-
-	pr_debug(DEVNAME ": done starting\n");
-
-	return 0;
-
-out_free_irq:
-	free_irq(K_INT_TRACE_FREEZE, &sbp);
-
-	return err;
-}
-
-static int sbprof_zbprof_stop(void)
-{
-	int err;
-
-	pr_debug(DEVNAME ": stopping\n");
-
-	if (sbp.tb_enable) {
-		/*
-		 * XXXKW there is a window here where the intr handler may run,
-		 * see the disable, and do the wake_up before this sleep
-		 * happens.
-		 */
-		pr_debug(DEVNAME ": wait for disarm\n");
-		err = wait_event_interruptible(sbp.tb_sync, !sbp.tb_armed);
-		pr_debug(DEVNAME ": disarm complete, stat %d\n", err);
-
-		if (err)
-			return err;
-
-		sbp.tb_enable = 0;
-		free_irq(K_INT_TRACE_FREEZE, &sbp);
-		free_irq(K_INT_PERF_CNT, &sbp);
-	}
-
-	pr_debug(DEVNAME ": done stopping\n");
-
-	return 0;
-}
-
-static int sbprof_tb_open(struct inode *inode, struct file *filp)
-{
-	int minor;
-
-	minor = iminor(inode);
-	if (minor != 0)
-		return -ENODEV;
-
-	if (xchg(&sbp.open, SB_OPENING) != SB_CLOSED)
-		return -EBUSY;
-
-	memset(&sbp, 0, sizeof(struct sbprof_tb));
-
-	sbp.sbprof_tbbuf = vmalloc(MAX_TBSAMPLE_BYTES);
-	if (!sbp.sbprof_tbbuf)
-		return -ENOMEM;
-
-	memset(sbp.sbprof_tbbuf, 0, MAX_TBSAMPLE_BYTES);
-	init_waitqueue_head(&sbp.tb_sync);
-	init_waitqueue_head(&sbp.tb_read);
-	mutex_init(&sbp.lock);
-
-	sbp.open = SB_OPEN;
-
-	return 0;
-}
-
-static int sbprof_tb_release(struct inode *inode, struct file *filp)
-{
-	int minor = iminor(inode);
-
-	if (minor != 0 || !sbp.open)
-		return -ENODEV;
-
-	mutex_lock(&sbp.lock);
-
-	if (sbp.tb_armed || sbp.tb_enable)
-		sbprof_zbprof_stop();
-
-	vfree(sbp.sbprof_tbbuf);
-	sbp.open = 0;
-
-	mutex_unlock(&sbp.lock);
-
-	return 0;
-}
-
-static ssize_t sbprof_tb_read(struct file *filp, char *buf,
-			      size_t size, loff_t *offp)
-{
-	int cur_sample, sample_off, cur_count, sample_left;
-	long  cur_off = *offp;
-	char *dest    =	 buf;
-	int   count   =	 0;
-	char *src;
-
-	if (!access_ok(VERIFY_WRITE, buf, size))
-		return -EFAULT;
-
-	mutex_lock(&sbp.lock);
-
-	count = 0;
-	cur_sample = cur_off / TB_SAMPLE_SIZE;
-	sample_off = cur_off % TB_SAMPLE_SIZE;
-	sample_left = TB_SAMPLE_SIZE - sample_off;
-
-	while (size && (cur_sample < sbp.next_tb_sample)) {
-		int err;
-
-		cur_count = size < sample_left ? size : sample_left;
-		src = (char *)(((long)sbp.sbprof_tbbuf[cur_sample])+sample_off);
-		err = __copy_to_user(dest, src, cur_count);
-		if (err) {
-			*offp = cur_off + cur_count - err;
-			mutex_unlock(&sbp.lock);
-			return err;
-		}
-
-		pr_debug(DEVNAME ": read from sample %d, %d bytes\n",
-		         cur_sample, cur_count);
-		size -= cur_count;
-		sample_left -= cur_count;
-		if (!sample_left) {
-			cur_sample++;
-			sample_off = 0;
-			sample_left = TB_SAMPLE_SIZE;
-		} else {
-			sample_off += cur_count;
-		}
-		cur_off += cur_count;
-		dest += cur_count;
-		count += cur_count;
-	}
-
-	*offp = cur_off;
-	mutex_unlock(&sbp.lock);
-
-	return count;
-}
-
-static long sbprof_tb_ioctl(struct file *filp, unsigned int command,
-	unsigned long arg)
-{
-	int error = 0;
-
-	switch (command) {
-	case SBPROF_ZBSTART:
-		mutex_lock(&sbp.lock);
-		error = sbprof_zbprof_start(filp);
-		mutex_unlock(&sbp.lock);
-		break;
-
-	case SBPROF_ZBSTOP:
-		mutex_lock(&sbp.lock);
-		error = sbprof_zbprof_stop();
-		mutex_unlock(&sbp.lock);
-		break;
-
-	case SBPROF_ZBWAITFULL:
-		error = wait_event_interruptible(sbp.tb_read, TB_FULL);
-		if (error)
-			break;
-
-		error = put_user(TB_FULL, (int *) arg);
-		break;
-
-	default:
-		error = -EINVAL;
-		break;
-	}
-
-	return error;
-}
-
-static const struct file_operations sbprof_tb_fops = {
-	.owner		= THIS_MODULE,
-	.open		= sbprof_tb_open,
-	.release	= sbprof_tb_release,
-	.read		= sbprof_tb_read,
-	.unlocked_ioctl	= sbprof_tb_ioctl,
-	.compat_ioctl	= sbprof_tb_ioctl,
-	.mmap		= NULL,
-};
-
-static struct class *tb_class;
-static struct device *tb_dev;
-
-static int __init sbprof_tb_init(void)
-{
-	struct device *dev;
-	struct class *tbc;
-	int err;
-
-	if (register_chrdev(SBPROF_TB_MAJOR, DEVNAME, &sbprof_tb_fops)) {
-		printk(KERN_WARNING DEVNAME ": initialization failed (dev %d)\n",
-		       SBPROF_TB_MAJOR);
-		return -EIO;
-	}
-
-	tbc = class_create(THIS_MODULE, "sb_tracebuffer");
-	if (IS_ERR(tbc)) {
-		err = PTR_ERR(tbc);
-		goto out_chrdev;
-	}
-
-	tb_class = tbc;
-
-	dev = device_create(tbc, NULL, MKDEV(SBPROF_TB_MAJOR, 0), "tb");
-	if (IS_ERR(dev)) {
-		err = PTR_ERR(dev);
-		goto out_class;
-	}
-	tb_dev = dev;
-
-	sbp.open = 0;
-	tb_period = zbbus_mhz * 10000LL;
-	pr_info(DEVNAME ": initialized - tb_period = %lld\n", tb_period);
-
-	return 0;
-
-out_class:
-	class_destroy(tb_class);
-out_chrdev:
-	unregister_chrdev(SBPROF_TB_MAJOR, DEVNAME);
-
-	return err;
-}
-
-static void __exit sbprof_tb_cleanup(void)
-{
-	device_destroy(tb_class, MKDEV(SBPROF_TB_MAJOR, 0));
-	unregister_chrdev(SBPROF_TB_MAJOR, DEVNAME);
-	class_destroy(tb_class);
-}
-
-module_init(sbprof_tb_init);
-module_exit(sbprof_tb_cleanup);
-
-MODULE_ALIAS_CHARDEV_MAJOR(SBPROF_TB_MAJOR);
-MODULE_AUTHOR("Ralf Baechle <ralf@linux-mips.org>");
-MODULE_LICENSE("GPL");