powerpc/fsl: Move Freescale device tree files into fsl folder

It makes no sense that some Freescale device tree files are in fsl
directory while some others not. This patch move Freescale device tree
files into fsl folder. To do that the following two steps are made:
- Move Freescale device tree files into fsl folder.
- Update the include path in these files from "fsl/*.dtsi" to "*.dtsi".

Please add "fsl/" prefix when you make dtb using Makefile.

Signed-off-by: Jia Hongtao <hongtao.jia@freescale.com>
[scottwood: fixed cuImage rule]
Signed-off-by: Scott Wood <scottwood@freescale.com>

1 files changed, 0 insertions, 207 deletions

diff --git a/arch/powerpc/boot/dts/mpc8544ds.dtsi b/arch/powerpc/boot/dts/mpc8544ds.dtsi
deleted file mode 100644
index 47d986b041f6..000000000000
--- a/arch/powerpc/boot/dts/mpc8544ds.dtsi
+++ /dev/null
@@ -1,207 +0,0 @@
-/*
- * MPC8544DS Device Tree Source stub (no addresses or top-level ranges)
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-&board_lbc {
-	nor@0,0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "cfi-flash";
-		reg = <0x0 0x0 0x800000>;
-		bank-width = <2>;
-		device-width = <1>;
-
-		partition@0 {
-			reg = <0x0 0x10000>;
-			label = "dtb-nor";
-		};
-
-		partition@20000 {
-			reg = <0x20000 0x30000>;
-			label = "diagnostic-nor";
-			read-only;
-		};
-
-		partition@200000 {
-			reg = <0x200000 0x200000>;
-			label = "dink-nor";
-			read-only;
-		};
-
-		partition@400000 {
-			reg = <0x400000 0x380000>;
-			label = "kernel-nor";
-		};
-
-		partition@780000 {
-			reg = <0x780000 0x80000>;
-			label = "u-boot-nor";
-			read-only;
-		};
-	};
-};
-
-&board_soc {
-	enet0: ethernet@24000 {
-		phy-handle = <&phy0>;
-		tbi-handle = <&tbi0>;
-		phy-connection-type = "rgmii-id";
-	};
-
-	mdio@24520 {
-		phy0: ethernet-phy@0 {
-			interrupts = <10 1 0 0>;
-			reg = <0x0>;
-		};
-		phy1: ethernet-phy@1 {
-			interrupts = <10 1 0 0>;
-			reg = <0x1>;
-		};
-
-		sgmii_phy0: sgmii-phy@0 {
-			interrupts = <6 1 0 0>;
-			reg = <0x1c>;
-		};
-		sgmii_phy1: sgmii-phy@1 {
-			interrupts = <6 1 0 0>;
-			reg = <0x1d>;
-		};
-
-		tbi0: tbi-phy@11 {
-			reg = <0x11>;
-			device_type = "tbi-phy";
-		};
-	};
-
-	enet2: ethernet@26000 {
-		phy-handle = <&phy1>;
-		tbi-handle = <&tbi1>;
-		phy-connection-type = "rgmii-id";
-	};
-
-	mdio@26520 {
-		tbi1: tbi-phy@11 {
-			reg = <0x11>;
-			device_type = "tbi-phy";
-		};
-	};
-};
-
-&board_pci3 {
-	pcie@0 {
-		interrupt-map-mask = <0xff00 0x0 0x0 0x7>;
-		interrupt-map = <
-			// IDSEL 0x1c  USB
-			0xe000 0x0 0x0 0x1 &i8259 0xc 0x2
-			0xe100 0x0 0x0 0x2 &i8259 0x9 0x2
-			0xe200 0x0 0x0 0x3 &i8259 0xa 0x2
-			0xe300 0x0 0x0 0x4 &i8259 0xb 0x2
-
-			// IDSEL 0x1d  Audio
-			0xe800 0x0 0x0 0x1 &i8259 0x6 0x2
-
-			// IDSEL 0x1e Legacy
-			0xf000 0x0 0x0 0x1 &i8259 0x7 0x2
-			0xf100 0x0 0x0 0x1 &i8259 0x7 0x2
-
-			// IDSEL 0x1f IDE/SATA
-			0xf800 0x0 0x0 0x1 &i8259 0xe 0x2
-			0xf900 0x0 0x0 0x1 &i8259 0x5 0x2
-			>;
-
-
-		uli1575@0 {
-			reg = <0x0 0x0 0x0 0x0 0x0>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			ranges = <0x2000000 0x0 0xb0000000
-				  0x2000000 0x0 0xb0000000
-				  0x0 0x100000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x100000>;
-			isa@1e {
-				device_type = "isa";
-				#interrupt-cells = <2>;
-				#size-cells = <1>;
-				#address-cells = <2>;
-				reg = <0xf000 0x0 0x0 0x0 0x0>;
-				ranges = <0x1 0x0 0x1000000 0x0 0x0
-					  0x1000>;
-				interrupt-parent = <&i8259>;
-
-				i8259: interrupt-controller@20 {
-					reg = <0x1 0x20 0x2
-					       0x1 0xa0 0x2
-					       0x1 0x4d0 0x2>;
-					interrupt-controller;
-					device_type = "interrupt-controller";
-					#address-cells = <0>;
-					#interrupt-cells = <2>;
-					compatible = "chrp,iic";
-					interrupts = <9 2 0 0>;
-					interrupt-parent = <&mpic>;
-				};
-
-				i8042@60 {
-					#size-cells = <0>;
-					#address-cells = <1>;
-					reg = <0x1 0x60 0x1 0x1 0x64 0x1>;
-					interrupts = <1 3 12 3>;
-					interrupt-parent =
-						<&i8259>;
-
-					keyboard@0 {
-						reg = <0x0>;
-						compatible = "pnpPNP,303";
-					};
-
-					mouse@1 {
-						reg = <0x1>;
-						compatible = "pnpPNP,f03";
-					};
-				};
-
-				rtc@70 {
-					compatible = "pnpPNP,b00";
-					reg = <0x1 0x70 0x2>;
-				};
-
-				gpio@400 {
-					reg = <0x1 0x400 0x80>;
-				};
-			};
-		};
-	};
-};