powerpc/fsl: Move Freescale device tree files into fsl folder

It makes no sense that some Freescale device tree files are in fsl
directory while some others not. This patch move Freescale device tree
files into fsl folder. To do that the following two steps are made:
- Move Freescale device tree files into fsl folder.
- Update the include path in these files from "fsl/*.dtsi" to "*.dtsi".

Please add "fsl/" prefix when you make dtb using Makefile.

Signed-off-by: Jia Hongtao <hongtao.jia@freescale.com>
[scottwood: fixed cuImage rule]
Signed-off-by: Scott Wood <scottwood@freescale.com>

1 files changed, 0 insertions, 162 deletions

diff --git a/arch/powerpc/boot/dts/t1023rdb.dts b/arch/powerpc/boot/dts/t1023rdb.dts
deleted file mode 100644
index d3fa8294cd49..000000000000
--- a/arch/powerpc/boot/dts/t1023rdb.dts
+++ /dev/null
@@ -1,162 +0,0 @@
-/*
- * T1023 RDB Device Tree Source
- *
- * Copyright 2014 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *	 notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *	 notice, this list of conditions and the following disclaimer in the
- *	 documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *	 names of its contributors may be used to endorse or promote products
- *	 derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/include/ "fsl/t102xsi-pre.dtsi"
-
-/ {
-	model = "fsl,T1023RDB";
-	compatible = "fsl,T1023RDB";
-	#address-cells = <2>;
-	#size-cells = <2>;
-	interrupt-parent = <&mpic>;
-
-	ifc: localbus@ffe124000 {
-		reg = <0xf 0xfe124000 0 0x2000>;
-		ranges = <0 0 0xf 0xe8000000 0x08000000
-			  1 0 0xf 0xff800000 0x00010000>;
-
-		nor@0,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			status = "disabled";
-			compatible = "cfi-flash";
-			reg = <0x0 0x0 0x8000000>;
-			bank-width = <2>;
-			device-width = <1>;
-		};
-
-		nand@1,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,ifc-nand";
-			reg = <0x1 0x0 0x10000>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-	};
-
-	dcsr: dcsr@f00000000 {
-		ranges = <0x00000000 0xf 0x00000000 0x01072000>;
-	};
-
-	soc: soc@ffe000000 {
-		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
-		reg = <0xf 0xfe000000 0 0x00001000>;
-		spi@110000 {
-			flash@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "spansion,s25fl512s";
-				reg = <0>;
-				spi-max-frequency = <10000000>; /* input clk */
-			};
-		};
-
-		i2c@118000 {
-			eeprom@50 {
-				compatible = "st,m24256";
-				reg = <0x50>;
-			};
-
-			rtc@68 {
-				compatible = "dallas,ds1339";
-				reg = <0x68>;
-				interrupts = <0x5 0x1 0 0>;
-			};
-		};
-
-		i2c@118100 {
-			current-sensor@40 {
-				compatible = "ti,ina220";
-				reg = <0x40>;
-				shunt-resistor = <1000>;
-			};
-
-			current-sensor@41 {
-				compatible = "ti,ina220";
-				reg = <0x41>;
-				shunt-resistor = <1000>;
-			};
-		};
-	};
-
-	pci0: pcie@ffe240000 {
-		reg = <0xf 0xfe240000 0 0x10000>;
-		ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0 0x10000000
-			  0x01000000 0 0x00000000 0xf 0xf8000000 0 0x00010000>;
-		pcie@0 {
-			ranges = <0x02000000 0 0xe0000000
-				  0x02000000 0 0xe0000000
-				  0 0x10000000
-
-				  0x01000000 0 0x00000000
-				  0x01000000 0 0x00000000
-				  0 0x00010000>;
-		};
-	};
-
-	pci1: pcie@ffe250000 {
-		reg = <0xf 0xfe250000 0 0x10000>;
-		ranges = <0x02000000 0 0xe0000000 0xc 0x10000000 0 0x10000000
-			  0x01000000 0 0x00000000 0xf 0xf8010000 0 0x00010000>;
-		pcie@0 {
-			ranges = <0x02000000 0 0xe0000000
-				  0x02000000 0 0xe0000000
-				  0 0x10000000
-
-				  0x01000000 0 0x00000000
-				  0x01000000 0 0x00000000
-				  0 0x00010000>;
-		};
-	};
-
-	pci2: pcie@ffe260000 {
-		reg = <0xf 0xfe260000 0 0x10000>;
-		ranges = <0x02000000 0 0xe0000000 0xc 0x20000000 0 0x10000000
-			  0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
-		pcie@0 {
-			ranges = <0x02000000 0 0xe0000000
-				  0x02000000 0 0xe0000000
-				  0 0x10000000
-
-				  0x01000000 0 0x00000000
-				  0x01000000 0 0x00000000
-				  0 0x00010000>;
-		};
-	};
-};
-
-/include/ "fsl/t1023si-post.dtsi"