Merge tag 'powerpc-5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc updates from Michael Ellerman:

 - A big series refactoring parts of our KVM code, and converting some
   to C.

 - Support for ARCH_HAS_SET_MEMORY, and ARCH_HAS_STRICT_MODULE_RWX on
   some CPUs.

 - Support for the Microwatt soft-core.

 - Optimisations to our interrupt return path on 64-bit.

 - Support for userspace access to the NX GZIP accelerator on PowerVM on
   Power10.

 - Enable KUAP and KUEP by default on 32-bit Book3S CPUs.

 - Other smaller features, fixes & cleanups.

Thanks to: Andy Shevchenko, Aneesh Kumar K.V, Arnd Bergmann, Athira
Rajeev, Baokun Li, Benjamin Herrenschmidt, Bharata B Rao, Christophe
Leroy, Daniel Axtens, Daniel Henrique Barboza, Finn Thain, Geoff Levand,
Haren Myneni, Jason Wang, Jiapeng Chong, Joel Stanley, Jordan Niethe,
Kajol Jain, Nathan Chancellor, Nathan Lynch, Naveen N. Rao, Nicholas
Piggin, Nick Desaulniers, Paul Mackerras, Russell Currey, Sathvika
Vasireddy, Shaokun Zhang, Stephen Rothwell, Sudeep Holla, Suraj Jitindar
Singh, Tom Rix, Vaibhav Jain, YueHaibing, Zhang Jianhua, and Zhen Lei.

* tag 'powerpc-5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (218 commits)
  powerpc: Only build restart_table.c for 64s
  powerpc/64s: move ret_from_fork etc above __end_soft_masked
  powerpc/64s/interrupt: clean up interrupt return labels
  powerpc/64/interrupt: add missing kprobe annotations on interrupt exit symbols
  powerpc/64: enable MSR[EE] in irq replay pt_regs
  powerpc/64s/interrupt: preserve regs->softe for NMI interrupts
  powerpc/64s: add a table of implicit soft-masked addresses
  powerpc/64e: remove implicit soft-masking and interrupt exit restart logic
  powerpc/64e: fix CONFIG_RELOCATABLE build warnings
  powerpc/64s: fix hash page fault interrupt handler
  powerpc/4xx: Fix setup_kuep() on SMP
  powerpc/32s: Fix setup_{kuap/kuep}() on SMP
  powerpc/interrupt: Use names in check_return_regs_valid()
  powerpc/interrupt: Also use exit_must_hard_disable() on PPC32
  powerpc/sysfs: Replace sizeof(arr)/sizeof(arr[0]) with ARRAY_SIZE
  powerpc/ptrace: Refactor regs_set_return_{msr/ip}
  powerpc/ptrace: Move set_return_regs_changed() before regs_set_return_{msr/ip}
  powerpc/stacktrace: Fix spurious "stale" traces in raise_backtrace_ipi()
  powerpc/pseries/vas: Include irqdomain.h
  powerpc: mark local variables around longjmp as volatile
  ...

1 files changed, 96 insertions, 0 deletions

diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c
index 72cb45393ef2..91e63eac4e8f 100644
--- a/arch/powerpc/kernel/irq.c
+++ b/arch/powerpc/kernel/irq.c
@@ -121,6 +121,7 @@ void replay_soft_interrupts(void)
 
 	ppc_save_regs(&regs);
 	regs.softe = IRQS_ENABLED;
+	regs.msr |= MSR_EE;
 
 again:
 	if (IS_ENABLED(CONFIG_PPC_IRQ_SOFT_MASK_DEBUG))
@@ -217,6 +218,100 @@ static inline void replay_soft_interrupts_irqrestore(void)
 #define replay_soft_interrupts_irqrestore() replay_soft_interrupts()
 #endif
 
+#ifdef CONFIG_CC_HAS_ASM_GOTO
+notrace void arch_local_irq_restore(unsigned long mask)
+{
+	unsigned char irq_happened;
+
+	/* Write the new soft-enabled value if it is a disable */
+	if (mask) {
+		irq_soft_mask_set(mask);
+		return;
+	}
+
+	/*
+	 * After the stb, interrupts are unmasked and there are no interrupts
+	 * pending replay. The restart sequence makes this atomic with
+	 * respect to soft-masked interrupts. If this was just a simple code
+	 * sequence, a soft-masked interrupt could become pending right after
+	 * the comparison and before the stb.
+	 *
+	 * This allows interrupts to be unmasked without hard disabling, and
+	 * also without new hard interrupts coming in ahead of pending ones.
+	 */
+	asm_volatile_goto(
+"1:					\n"
+"		lbz	9,%0(13)	\n"
+"		cmpwi	9,0		\n"
+"		bne	%l[happened]	\n"
+"		stb	9,%1(13)	\n"
+"2:					\n"
+		RESTART_TABLE(1b, 2b, 1b)
+	: : "i" (offsetof(struct paca_struct, irq_happened)),
+	    "i" (offsetof(struct paca_struct, irq_soft_mask))
+	: "cr0", "r9"
+	: happened);
+
+	if (IS_ENABLED(CONFIG_PPC_IRQ_SOFT_MASK_DEBUG))
+		WARN_ON_ONCE(!(mfmsr() & MSR_EE));
+
+	return;
+
+happened:
+	irq_happened = get_irq_happened();
+	if (IS_ENABLED(CONFIG_PPC_IRQ_SOFT_MASK_DEBUG))
+		WARN_ON_ONCE(!irq_happened);
+
+	if (irq_happened == PACA_IRQ_HARD_DIS) {
+		if (IS_ENABLED(CONFIG_PPC_IRQ_SOFT_MASK_DEBUG))
+			WARN_ON_ONCE(mfmsr() & MSR_EE);
+		irq_soft_mask_set(IRQS_ENABLED);
+		local_paca->irq_happened = 0;
+		__hard_irq_enable();
+		return;
+	}
+
+	/* Have interrupts to replay, need to hard disable first */
+	if (!(irq_happened & PACA_IRQ_HARD_DIS)) {
+		if (IS_ENABLED(CONFIG_PPC_IRQ_SOFT_MASK_DEBUG)) {
+			if (!(mfmsr() & MSR_EE)) {
+				/*
+				 * An interrupt could have come in and cleared
+				 * MSR[EE] and set IRQ_HARD_DIS, so check
+				 * IRQ_HARD_DIS again and warn if it is still
+				 * clear.
+				 */
+				irq_happened = get_irq_happened();
+				WARN_ON_ONCE(!(irq_happened & PACA_IRQ_HARD_DIS));
+			}
+		}
+		__hard_irq_disable();
+		local_paca->irq_happened |= PACA_IRQ_HARD_DIS;
+	} else {
+		if (IS_ENABLED(CONFIG_PPC_IRQ_SOFT_MASK_DEBUG)) {
+			if (WARN_ON_ONCE(mfmsr() & MSR_EE))
+				__hard_irq_disable();
+		}
+	}
+
+	/*
+	 * Disable preempt here, so that the below preempt_enable will
+	 * perform resched if required (a replayed interrupt may set
+	 * need_resched).
+	 */
+	preempt_disable();
+	irq_soft_mask_set(IRQS_ALL_DISABLED);
+	trace_hardirqs_off();
+
+	replay_soft_interrupts_irqrestore();
+	local_paca->irq_happened = 0;
+
+	trace_hardirqs_on();
+	irq_soft_mask_set(IRQS_ENABLED);
+	__hard_irq_enable();
+	preempt_enable();
+}
+#else
 notrace void arch_local_irq_restore(unsigned long mask)
 {
 	unsigned char irq_happened;
@@ -288,6 +383,7 @@ notrace void arch_local_irq_restore(unsigned long mask)
 	__hard_irq_enable();
 	preempt_enable();
 }
+#endif
 EXPORT_SYMBOL(arch_local_irq_restore);
 
 /*