powerpc/mm: Move nohash specifics in subdirectory mm/nohash

Many files in arch/powerpc/mm are only for nohash. This patch
creates a subdirectory for them.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
[mpe: Shorten new filenames]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

1 files changed, 0 insertions, 810 deletions

diff --git a/arch/powerpc/mm/tlb_nohash.c b/arch/powerpc/mm/tlb_nohash.c
deleted file mode 100644
index 704e613a0b14..000000000000
--- a/arch/powerpc/mm/tlb_nohash.c
+++ /dev/null
@@ -1,810 +0,0 @@
-/*
- * This file contains the routines for TLB flushing.
- * On machines where the MMU does not use a hash table to store virtual to
- * physical translations (ie, SW loaded TLBs or Book3E compilant processors,
- * this does -not- include 603 however which shares the implementation with
- * hash based processors)
- *
- *  -- BenH
- *
- * Copyright 2008,2009 Ben Herrenschmidt <benh@kernel.crashing.org>
- *                     IBM Corp.
- *
- *  Derived from arch/ppc/mm/init.c:
- *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
- *
- *  Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au)
- *  and Cort Dougan (PReP) (cort@cs.nmt.edu)
- *    Copyright (C) 1996 Paul Mackerras
- *
- *  Derived from "arch/i386/mm/init.c"
- *    Copyright (C) 1991, 1992, 1993, 1994  Linus Torvalds
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/export.h>
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/highmem.h>
-#include <linux/pagemap.h>
-#include <linux/preempt.h>
-#include <linux/spinlock.h>
-#include <linux/memblock.h>
-#include <linux/of_fdt.h>
-#include <linux/hugetlb.h>
-
-#include <asm/tlbflush.h>
-#include <asm/tlb.h>
-#include <asm/code-patching.h>
-#include <asm/cputhreads.h>
-#include <asm/hugetlb.h>
-#include <asm/paca.h>
-
-#include <mm/mmu_decl.h>
-
-/*
- * This struct lists the sw-supported page sizes.  The hardawre MMU may support
- * other sizes not listed here.   The .ind field is only used on MMUs that have
- * indirect page table entries.
- */
-#if defined(CONFIG_PPC_BOOK3E_MMU) || defined(CONFIG_PPC_8xx)
-#ifdef CONFIG_PPC_FSL_BOOK3E
-struct mmu_psize_def mmu_psize_defs[MMU_PAGE_COUNT] = {
-	[MMU_PAGE_4K] = {
-		.shift	= 12,
-		.enc	= BOOK3E_PAGESZ_4K,
-	},
-	[MMU_PAGE_2M] = {
-		.shift	= 21,
-		.enc	= BOOK3E_PAGESZ_2M,
-	},
-	[MMU_PAGE_4M] = {
-		.shift	= 22,
-		.enc	= BOOK3E_PAGESZ_4M,
-	},
-	[MMU_PAGE_16M] = {
-		.shift	= 24,
-		.enc	= BOOK3E_PAGESZ_16M,
-	},
-	[MMU_PAGE_64M] = {
-		.shift	= 26,
-		.enc	= BOOK3E_PAGESZ_64M,
-	},
-	[MMU_PAGE_256M] = {
-		.shift	= 28,
-		.enc	= BOOK3E_PAGESZ_256M,
-	},
-	[MMU_PAGE_1G] = {
-		.shift	= 30,
-		.enc	= BOOK3E_PAGESZ_1GB,
-	},
-};
-#elif defined(CONFIG_PPC_8xx)
-struct mmu_psize_def mmu_psize_defs[MMU_PAGE_COUNT] = {
-	/* we only manage 4k and 16k pages as normal pages */
-#ifdef CONFIG_PPC_4K_PAGES
-	[MMU_PAGE_4K] = {
-		.shift	= 12,
-	},
-#else
-	[MMU_PAGE_16K] = {
-		.shift	= 14,
-	},
-#endif
-	[MMU_PAGE_512K] = {
-		.shift	= 19,
-	},
-	[MMU_PAGE_8M] = {
-		.shift	= 23,
-	},
-};
-#else
-struct mmu_psize_def mmu_psize_defs[MMU_PAGE_COUNT] = {
-	[MMU_PAGE_4K] = {
-		.shift	= 12,
-		.ind	= 20,
-		.enc	= BOOK3E_PAGESZ_4K,
-	},
-	[MMU_PAGE_16K] = {
-		.shift	= 14,
-		.enc	= BOOK3E_PAGESZ_16K,
-	},
-	[MMU_PAGE_64K] = {
-		.shift	= 16,
-		.ind	= 28,
-		.enc	= BOOK3E_PAGESZ_64K,
-	},
-	[MMU_PAGE_1M] = {
-		.shift	= 20,
-		.enc	= BOOK3E_PAGESZ_1M,
-	},
-	[MMU_PAGE_16M] = {
-		.shift	= 24,
-		.ind	= 36,
-		.enc	= BOOK3E_PAGESZ_16M,
-	},
-	[MMU_PAGE_256M] = {
-		.shift	= 28,
-		.enc	= BOOK3E_PAGESZ_256M,
-	},
-	[MMU_PAGE_1G] = {
-		.shift	= 30,
-		.enc	= BOOK3E_PAGESZ_1GB,
-	},
-};
-#endif /* CONFIG_FSL_BOOKE */
-
-static inline int mmu_get_tsize(int psize)
-{
-	return mmu_psize_defs[psize].enc;
-}
-#else
-static inline int mmu_get_tsize(int psize)
-{
-	/* This isn't used on !Book3E for now */
-	return 0;
-}
-#endif /* CONFIG_PPC_BOOK3E_MMU */
-
-/* The variables below are currently only used on 64-bit Book3E
- * though this will probably be made common with other nohash
- * implementations at some point
- */
-#ifdef CONFIG_PPC64
-
-int mmu_linear_psize;		/* Page size used for the linear mapping */
-int mmu_pte_psize;		/* Page size used for PTE pages */
-int mmu_vmemmap_psize;		/* Page size used for the virtual mem map */
-int book3e_htw_mode;		/* HW tablewalk?  Value is PPC_HTW_* */
-unsigned long linear_map_top;	/* Top of linear mapping */
-
-
-/*
- * Number of bytes to add to SPRN_SPRG_TLB_EXFRAME on crit/mcheck/debug
- * exceptions.  This is used for bolted and e6500 TLB miss handlers which
- * do not modify this SPRG in the TLB miss code; for other TLB miss handlers,
- * this is set to zero.
- */
-int extlb_level_exc;
-
-#endif /* CONFIG_PPC64 */
-
-#ifdef CONFIG_PPC_FSL_BOOK3E
-/* next_tlbcam_idx is used to round-robin tlbcam entry assignment */
-DEFINE_PER_CPU(int, next_tlbcam_idx);
-EXPORT_PER_CPU_SYMBOL(next_tlbcam_idx);
-#endif
-
-/*
- * Base TLB flushing operations:
- *
- *  - flush_tlb_mm(mm) flushes the specified mm context TLB's
- *  - flush_tlb_page(vma, vmaddr) flushes one page
- *  - flush_tlb_range(vma, start, end) flushes a range of pages
- *  - flush_tlb_kernel_range(start, end) flushes kernel pages
- *
- *  - local_* variants of page and mm only apply to the current
- *    processor
- */
-
-/*
- * These are the base non-SMP variants of page and mm flushing
- */
-void local_flush_tlb_mm(struct mm_struct *mm)
-{
-	unsigned int pid;
-
-	preempt_disable();
-	pid = mm->context.id;
-	if (pid != MMU_NO_CONTEXT)
-		_tlbil_pid(pid);
-	preempt_enable();
-}
-EXPORT_SYMBOL(local_flush_tlb_mm);
-
-void __local_flush_tlb_page(struct mm_struct *mm, unsigned long vmaddr,
-			    int tsize, int ind)
-{
-	unsigned int pid;
-
-	preempt_disable();
-	pid = mm ? mm->context.id : 0;
-	if (pid != MMU_NO_CONTEXT)
-		_tlbil_va(vmaddr, pid, tsize, ind);
-	preempt_enable();
-}
-
-void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long vmaddr)
-{
-	__local_flush_tlb_page(vma ? vma->vm_mm : NULL, vmaddr,
-			       mmu_get_tsize(mmu_virtual_psize), 0);
-}
-EXPORT_SYMBOL(local_flush_tlb_page);
-
-/*
- * And here are the SMP non-local implementations
- */
-#ifdef CONFIG_SMP
-
-static DEFINE_RAW_SPINLOCK(tlbivax_lock);
-
-struct tlb_flush_param {
-	unsigned long addr;
-	unsigned int pid;
-	unsigned int tsize;
-	unsigned int ind;
-};
-
-static void do_flush_tlb_mm_ipi(void *param)
-{
-	struct tlb_flush_param *p = param;
-
-	_tlbil_pid(p ? p->pid : 0);
-}
-
-static void do_flush_tlb_page_ipi(void *param)
-{
-	struct tlb_flush_param *p = param;
-
-	_tlbil_va(p->addr, p->pid, p->tsize, p->ind);
-}
-
-
-/* Note on invalidations and PID:
- *
- * We snapshot the PID with preempt disabled. At this point, it can still
- * change either because:
- * - our context is being stolen (PID -> NO_CONTEXT) on another CPU
- * - we are invaliating some target that isn't currently running here
- *   and is concurrently acquiring a new PID on another CPU
- * - some other CPU is re-acquiring a lost PID for this mm
- * etc...
- *
- * However, this shouldn't be a problem as we only guarantee
- * invalidation of TLB entries present prior to this call, so we
- * don't care about the PID changing, and invalidating a stale PID
- * is generally harmless.
- */
-
-void flush_tlb_mm(struct mm_struct *mm)
-{
-	unsigned int pid;
-
-	preempt_disable();
-	pid = mm->context.id;
-	if (unlikely(pid == MMU_NO_CONTEXT))
-		goto no_context;
-	if (!mm_is_core_local(mm)) {
-		struct tlb_flush_param p = { .pid = pid };
-		/* Ignores smp_processor_id() even if set. */
-		smp_call_function_many(mm_cpumask(mm),
-				       do_flush_tlb_mm_ipi, &p, 1);
-	}
-	_tlbil_pid(pid);
- no_context:
-	preempt_enable();
-}
-EXPORT_SYMBOL(flush_tlb_mm);
-
-void __flush_tlb_page(struct mm_struct *mm, unsigned long vmaddr,
-		      int tsize, int ind)
-{
-	struct cpumask *cpu_mask;
-	unsigned int pid;
-
-	/*
-	 * This function as well as __local_flush_tlb_page() must only be called
-	 * for user contexts.
-	 */
-	if (WARN_ON(!mm))
-		return;
-
-	preempt_disable();
-	pid = mm->context.id;
-	if (unlikely(pid == MMU_NO_CONTEXT))
-		goto bail;
-	cpu_mask = mm_cpumask(mm);
-	if (!mm_is_core_local(mm)) {
-		/* If broadcast tlbivax is supported, use it */
-		if (mmu_has_feature(MMU_FTR_USE_TLBIVAX_BCAST)) {
-			int lock = mmu_has_feature(MMU_FTR_LOCK_BCAST_INVAL);
-			if (lock)
-				raw_spin_lock(&tlbivax_lock);
-			_tlbivax_bcast(vmaddr, pid, tsize, ind);
-			if (lock)
-				raw_spin_unlock(&tlbivax_lock);
-			goto bail;
-		} else {
-			struct tlb_flush_param p = {
-				.pid = pid,
-				.addr = vmaddr,
-				.tsize = tsize,
-				.ind = ind,
-			};
-			/* Ignores smp_processor_id() even if set in cpu_mask */
-			smp_call_function_many(cpu_mask,
-					       do_flush_tlb_page_ipi, &p, 1);
-		}
-	}
-	_tlbil_va(vmaddr, pid, tsize, ind);
- bail:
-	preempt_enable();
-}
-
-void flush_tlb_page(struct vm_area_struct *vma, unsigned long vmaddr)
-{
-#ifdef CONFIG_HUGETLB_PAGE
-	if (vma && is_vm_hugetlb_page(vma))
-		flush_hugetlb_page(vma, vmaddr);
-#endif
-
-	__flush_tlb_page(vma ? vma->vm_mm : NULL, vmaddr,
-			 mmu_get_tsize(mmu_virtual_psize), 0);
-}
-EXPORT_SYMBOL(flush_tlb_page);
-
-#endif /* CONFIG_SMP */
-
-#ifdef CONFIG_PPC_47x
-void __init early_init_mmu_47x(void)
-{
-#ifdef CONFIG_SMP
-	unsigned long root = of_get_flat_dt_root();
-	if (of_get_flat_dt_prop(root, "cooperative-partition", NULL))
-		mmu_clear_feature(MMU_FTR_USE_TLBIVAX_BCAST);
-#endif /* CONFIG_SMP */
-}
-#endif /* CONFIG_PPC_47x */
-
-/*
- * Flush kernel TLB entries in the given range
- */
-void flush_tlb_kernel_range(unsigned long start, unsigned long end)
-{
-#ifdef CONFIG_SMP
-	preempt_disable();
-	smp_call_function(do_flush_tlb_mm_ipi, NULL, 1);
-	_tlbil_pid(0);
-	preempt_enable();
-#else
-	_tlbil_pid(0);
-#endif
-}
-EXPORT_SYMBOL(flush_tlb_kernel_range);
-
-/*
- * Currently, for range flushing, we just do a full mm flush. This should
- * be optimized based on a threshold on the size of the range, since
- * some implementation can stack multiple tlbivax before a tlbsync but
- * for now, we keep it that way
- */
-void flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
-		     unsigned long end)
-
-{
-	if (end - start == PAGE_SIZE && !(start & ~PAGE_MASK))
-		flush_tlb_page(vma, start);
-	else
-		flush_tlb_mm(vma->vm_mm);
-}
-EXPORT_SYMBOL(flush_tlb_range);
-
-void tlb_flush(struct mmu_gather *tlb)
-{
-	flush_tlb_mm(tlb->mm);
-}
-
-/*
- * Below are functions specific to the 64-bit variant of Book3E though that
- * may change in the future
- */
-
-#ifdef CONFIG_PPC64
-
-/*
- * Handling of virtual linear page tables or indirect TLB entries
- * flushing when PTE pages are freed
- */
-void tlb_flush_pgtable(struct mmu_gather *tlb, unsigned long address)
-{
-	int tsize = mmu_psize_defs[mmu_pte_psize].enc;
-
-	if (book3e_htw_mode != PPC_HTW_NONE) {
-		unsigned long start = address & PMD_MASK;
-		unsigned long end = address + PMD_SIZE;
-		unsigned long size = 1UL << mmu_psize_defs[mmu_pte_psize].shift;
-
-		/* This isn't the most optimal, ideally we would factor out the
-		 * while preempt & CPU mask mucking around, or even the IPI but
-		 * it will do for now
-		 */
-		while (start < end) {
-			__flush_tlb_page(tlb->mm, start, tsize, 1);
-			start += size;
-		}
-	} else {
-		unsigned long rmask = 0xf000000000000000ul;
-		unsigned long rid = (address & rmask) | 0x1000000000000000ul;
-		unsigned long vpte = address & ~rmask;
-
-#ifdef CONFIG_PPC_64K_PAGES
-		vpte = (vpte >> (PAGE_SHIFT - 4)) & ~0xfffful;
-#else
-		vpte = (vpte >> (PAGE_SHIFT - 3)) & ~0xffful;
-#endif
-		vpte |= rid;
-		__flush_tlb_page(tlb->mm, vpte, tsize, 0);
-	}
-}
-
-static void setup_page_sizes(void)
-{
-	unsigned int tlb0cfg;
-	unsigned int tlb0ps;
-	unsigned int eptcfg;
-	int i, psize;
-
-#ifdef CONFIG_PPC_FSL_BOOK3E
-	unsigned int mmucfg = mfspr(SPRN_MMUCFG);
-	int fsl_mmu = mmu_has_feature(MMU_FTR_TYPE_FSL_E);
-
-	if (fsl_mmu && (mmucfg & MMUCFG_MAVN) == MMUCFG_MAVN_V1) {
-		unsigned int tlb1cfg = mfspr(SPRN_TLB1CFG);
-		unsigned int min_pg, max_pg;
-
-		min_pg = (tlb1cfg & TLBnCFG_MINSIZE) >> TLBnCFG_MINSIZE_SHIFT;
-		max_pg = (tlb1cfg & TLBnCFG_MAXSIZE) >> TLBnCFG_MAXSIZE_SHIFT;
-
-		for (psize = 0; psize < MMU_PAGE_COUNT; ++psize) {
-			struct mmu_psize_def *def;
-			unsigned int shift;
-
-			def = &mmu_psize_defs[psize];
-			shift = def->shift;
-
-			if (shift == 0 || shift & 1)
-				continue;
-
-			/* adjust to be in terms of 4^shift Kb */
-			shift = (shift - 10) >> 1;
-
-			if ((shift >= min_pg) && (shift <= max_pg))
-				def->flags |= MMU_PAGE_SIZE_DIRECT;
-		}
-
-		goto out;
-	}
-
-	if (fsl_mmu && (mmucfg & MMUCFG_MAVN) == MMUCFG_MAVN_V2) {
-		u32 tlb1cfg, tlb1ps;
-
-		tlb0cfg = mfspr(SPRN_TLB0CFG);
-		tlb1cfg = mfspr(SPRN_TLB1CFG);
-		tlb1ps = mfspr(SPRN_TLB1PS);
-		eptcfg = mfspr(SPRN_EPTCFG);
-
-		if ((tlb1cfg & TLBnCFG_IND) && (tlb0cfg & TLBnCFG_PT))
-			book3e_htw_mode = PPC_HTW_E6500;
-
-		/*
-		 * We expect 4K subpage size and unrestricted indirect size.
-		 * The lack of a restriction on indirect size is a Freescale
-		 * extension, indicated by PSn = 0 but SPSn != 0.
-		 */
-		if (eptcfg != 2)
-			book3e_htw_mode = PPC_HTW_NONE;
-
-		for (psize = 0; psize < MMU_PAGE_COUNT; ++psize) {
-			struct mmu_psize_def *def = &mmu_psize_defs[psize];
-
-			if (!def->shift)
-				continue;
-
-			if (tlb1ps & (1U << (def->shift - 10))) {
-				def->flags |= MMU_PAGE_SIZE_DIRECT;
-
-				if (book3e_htw_mode && psize == MMU_PAGE_2M)
-					def->flags |= MMU_PAGE_SIZE_INDIRECT;
-			}
-		}
-
-		goto out;
-	}
-#endif
-
-	tlb0cfg = mfspr(SPRN_TLB0CFG);
-	tlb0ps = mfspr(SPRN_TLB0PS);
-	eptcfg = mfspr(SPRN_EPTCFG);
-
-	/* Look for supported direct sizes */
-	for (psize = 0; psize < MMU_PAGE_COUNT; ++psize) {
-		struct mmu_psize_def *def = &mmu_psize_defs[psize];
-
-		if (tlb0ps & (1U << (def->shift - 10)))
-			def->flags |= MMU_PAGE_SIZE_DIRECT;
-	}
-
-	/* Indirect page sizes supported ? */
-	if ((tlb0cfg & TLBnCFG_IND) == 0 ||
-	    (tlb0cfg & TLBnCFG_PT) == 0)
-		goto out;
-
-	book3e_htw_mode = PPC_HTW_IBM;
-
-	/* Now, we only deal with one IND page size for each
-	 * direct size. Hopefully all implementations today are
-	 * unambiguous, but we might want to be careful in the
-	 * future.
-	 */
-	for (i = 0; i < 3; i++) {
-		unsigned int ps, sps;
-
-		sps = eptcfg & 0x1f;
-		eptcfg >>= 5;
-		ps = eptcfg & 0x1f;
-		eptcfg >>= 5;
-		if (!ps || !sps)
-			continue;
-		for (psize = 0; psize < MMU_PAGE_COUNT; psize++) {
-			struct mmu_psize_def *def = &mmu_psize_defs[psize];
-
-			if (ps == (def->shift - 10))
-				def->flags |= MMU_PAGE_SIZE_INDIRECT;
-			if (sps == (def->shift - 10))
-				def->ind = ps + 10;
-		}
-	}
-
-out:
-	/* Cleanup array and print summary */
-	pr_info("MMU: Supported page sizes\n");
-	for (psize = 0; psize < MMU_PAGE_COUNT; ++psize) {
-		struct mmu_psize_def *def = &mmu_psize_defs[psize];
-		const char *__page_type_names[] = {
-			"unsupported",
-			"direct",
-			"indirect",
-			"direct & indirect"
-		};
-		if (def->flags == 0) {
-			def->shift = 0;	
-			continue;
-		}
-		pr_info("  %8ld KB as %s\n", 1ul << (def->shift - 10),
-			__page_type_names[def->flags & 0x3]);
-	}
-}
-
-static void setup_mmu_htw(void)
-{
-	/*
-	 * If we want to use HW tablewalk, enable it by patching the TLB miss
-	 * handlers to branch to the one dedicated to it.
-	 */
-
-	switch (book3e_htw_mode) {
-	case PPC_HTW_IBM:
-		patch_exception(0x1c0, exc_data_tlb_miss_htw_book3e);
-		patch_exception(0x1e0, exc_instruction_tlb_miss_htw_book3e);
-		break;
-#ifdef CONFIG_PPC_FSL_BOOK3E
-	case PPC_HTW_E6500:
-		extlb_level_exc = EX_TLB_SIZE;
-		patch_exception(0x1c0, exc_data_tlb_miss_e6500_book3e);
-		patch_exception(0x1e0, exc_instruction_tlb_miss_e6500_book3e);
-		break;
-#endif
-	}
-	pr_info("MMU: Book3E HW tablewalk %s\n",
-		book3e_htw_mode != PPC_HTW_NONE ? "enabled" : "not supported");
-}
-
-/*
- * Early initialization of the MMU TLB code
- */
-static void early_init_this_mmu(void)
-{
-	unsigned int mas4;
-
-	/* Set MAS4 based on page table setting */
-
-	mas4 = 0x4 << MAS4_WIMGED_SHIFT;
-	switch (book3e_htw_mode) {
-	case PPC_HTW_E6500:
-		mas4 |= MAS4_INDD;
-		mas4 |= BOOK3E_PAGESZ_2M << MAS4_TSIZED_SHIFT;
-		mas4 |= MAS4_TLBSELD(1);
-		mmu_pte_psize = MMU_PAGE_2M;
-		break;
-
-	case PPC_HTW_IBM:
-		mas4 |= MAS4_INDD;
-#ifdef CONFIG_PPC_64K_PAGES
-		mas4 |=	BOOK3E_PAGESZ_256M << MAS4_TSIZED_SHIFT;
-		mmu_pte_psize = MMU_PAGE_256M;
-#else
-		mas4 |=	BOOK3E_PAGESZ_1M << MAS4_TSIZED_SHIFT;
-		mmu_pte_psize = MMU_PAGE_1M;
-#endif
-		break;
-
-	case PPC_HTW_NONE:
-#ifdef CONFIG_PPC_64K_PAGES
-		mas4 |=	BOOK3E_PAGESZ_64K << MAS4_TSIZED_SHIFT;
-#else
-		mas4 |=	BOOK3E_PAGESZ_4K << MAS4_TSIZED_SHIFT;
-#endif
-		mmu_pte_psize = mmu_virtual_psize;
-		break;
-	}
-	mtspr(SPRN_MAS4, mas4);
-
-#ifdef CONFIG_PPC_FSL_BOOK3E
-	if (mmu_has_feature(MMU_FTR_TYPE_FSL_E)) {
-		unsigned int num_cams;
-		int __maybe_unused cpu = smp_processor_id();
-		bool map = true;
-
-		/* use a quarter of the TLBCAM for bolted linear map */
-		num_cams = (mfspr(SPRN_TLB1CFG) & TLBnCFG_N_ENTRY) / 4;
-
-		/*
-		 * Only do the mapping once per core, or else the
-		 * transient mapping would cause problems.
-		 */
-#ifdef CONFIG_SMP
-		if (hweight32(get_tensr()) > 1)
-			map = false;
-#endif
-
-		if (map)
-			linear_map_top = map_mem_in_cams(linear_map_top,
-							 num_cams, false);
-	}
-#endif
-
-	/* A sync won't hurt us after mucking around with
-	 * the MMU configuration
-	 */
-	mb();
-}
-
-static void __init early_init_mmu_global(void)
-{
-	/* XXX This will have to be decided at runtime, but right
-	 * now our boot and TLB miss code hard wires it. Ideally
-	 * we should find out a suitable page size and patch the
-	 * TLB miss code (either that or use the PACA to store
-	 * the value we want)
-	 */
-	mmu_linear_psize = MMU_PAGE_1G;
-
-	/* XXX This should be decided at runtime based on supported
-	 * page sizes in the TLB, but for now let's assume 16M is
-	 * always there and a good fit (which it probably is)
-	 *
-	 * Freescale booke only supports 4K pages in TLB0, so use that.
-	 */
-	if (mmu_has_feature(MMU_FTR_TYPE_FSL_E))
-		mmu_vmemmap_psize = MMU_PAGE_4K;
-	else
-		mmu_vmemmap_psize = MMU_PAGE_16M;
-
-	/* XXX This code only checks for TLB 0 capabilities and doesn't
-	 *     check what page size combos are supported by the HW. It
-	 *     also doesn't handle the case where a separate array holds
-	 *     the IND entries from the array loaded by the PT.
-	 */
-	/* Look for supported page sizes */
-	setup_page_sizes();
-
-	/* Look for HW tablewalk support */
-	setup_mmu_htw();
-
-#ifdef CONFIG_PPC_FSL_BOOK3E
-	if (mmu_has_feature(MMU_FTR_TYPE_FSL_E)) {
-		if (book3e_htw_mode == PPC_HTW_NONE) {
-			extlb_level_exc = EX_TLB_SIZE;
-			patch_exception(0x1c0, exc_data_tlb_miss_bolted_book3e);
-			patch_exception(0x1e0,
-				exc_instruction_tlb_miss_bolted_book3e);
-		}
-	}
-#endif
-
-	/* Set the global containing the top of the linear mapping
-	 * for use by the TLB miss code
-	 */
-	linear_map_top = memblock_end_of_DRAM();
-}
-
-static void __init early_mmu_set_memory_limit(void)
-{
-#ifdef CONFIG_PPC_FSL_BOOK3E
-	if (mmu_has_feature(MMU_FTR_TYPE_FSL_E)) {
-		/*
-		 * Limit memory so we dont have linear faults.
-		 * Unlike memblock_set_current_limit, which limits
-		 * memory available during early boot, this permanently
-		 * reduces the memory available to Linux.  We need to
-		 * do this because highmem is not supported on 64-bit.
-		 */
-		memblock_enforce_memory_limit(linear_map_top);
-	}
-#endif
-
-	memblock_set_current_limit(linear_map_top);
-}
-
-/* boot cpu only */
-void __init early_init_mmu(void)
-{
-	early_init_mmu_global();
-	early_init_this_mmu();
-	early_mmu_set_memory_limit();
-}
-
-void early_init_mmu_secondary(void)
-{
-	early_init_this_mmu();
-}
-
-void setup_initial_memory_limit(phys_addr_t first_memblock_base,
-				phys_addr_t first_memblock_size)
-{
-	/* On non-FSL Embedded 64-bit, we adjust the RMA size to match
-	 * the bolted TLB entry. We know for now that only 1G
-	 * entries are supported though that may eventually
-	 * change.
-	 *
-	 * on FSL Embedded 64-bit, usually all RAM is bolted, but with
-	 * unusual memory sizes it's possible for some RAM to not be mapped
-	 * (such RAM is not used at all by Linux, since we don't support
-	 * highmem on 64-bit).  We limit ppc64_rma_size to what would be
-	 * mappable if this memblock is the only one.  Additional memblocks
-	 * can only increase, not decrease, the amount that ends up getting
-	 * mapped.  We still limit max to 1G even if we'll eventually map
-	 * more.  This is due to what the early init code is set up to do.
-	 *
-	 * We crop it to the size of the first MEMBLOCK to
-	 * avoid going over total available memory just in case...
-	 */
-#ifdef CONFIG_PPC_FSL_BOOK3E
-	if (early_mmu_has_feature(MMU_FTR_TYPE_FSL_E)) {
-		unsigned long linear_sz;
-		unsigned int num_cams;
-
-		/* use a quarter of the TLBCAM for bolted linear map */
-		num_cams = (mfspr(SPRN_TLB1CFG) & TLBnCFG_N_ENTRY) / 4;
-
-		linear_sz = map_mem_in_cams(first_memblock_size, num_cams,
-					    true);
-
-		ppc64_rma_size = min_t(u64, linear_sz, 0x40000000);
-	} else
-#endif
-		ppc64_rma_size = min_t(u64, first_memblock_size, 0x40000000);
-
-	/* Finally limit subsequent allocations */
-	memblock_set_current_limit(first_memblock_base + ppc64_rma_size);
-}
-#else /* ! CONFIG_PPC64 */
-void __init early_init_mmu(void)
-{
-#ifdef CONFIG_PPC_47x
-	early_init_mmu_47x();
-#endif
-
-#ifdef CONFIG_PPC_MM_SLICES
-#if defined(CONFIG_PPC_8xx)
-	init_mm.context.slb_addr_limit = DEFAULT_MAP_WINDOW;
-#endif
-#endif
-}
-#endif /* CONFIG_PPC64 */