powerpc: remove Wind River SBC8560 support

This reference board dates back to 2004, and is largely a legacy
EOL product.  The MPC8560 is a pre e500v2 CPU.  The SBC8548 is
a more modern, better e500v2 target for people to use as a
reference board with today's kernels, should they require one.

Removing support for it will also allow us to remove some
sbc8560 specific quirk handling in 8250 UART code, and some
MTD mapping support.

Cc: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

3 files changed, 0 insertions, 261 deletions

diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig
index f000d81c4e31..b3370be4a0c9 100644
--- a/arch/powerpc/platforms/85xx/Kconfig
+++ b/arch/powerpc/platforms/85xx/Kconfig
@@ -175,12 +175,6 @@ config SBC8548
 	help
 	  This option enables support for the Wind River SBC8548 board
 
-config SBC8560
-	bool "Wind River SBC8560"
-	select DEFAULT_UIMAGE
-	help
-	  This option enables support for the Wind River SBC8560 board
-
 config GE_IMP3A
 	bool "GE Intelligent Platforms IMP3A"
 	select DEFAULT_UIMAGE
diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile
index 2125d4ca068a..50280cc524d2 100644
--- a/arch/powerpc/platforms/85xx/Makefile
+++ b/arch/powerpc/platforms/85xx/Makefile
@@ -22,7 +22,6 @@ obj-$(CONFIG_P4080_DS)    += p4080_ds.o corenet_ds.o
 obj-$(CONFIG_P5020_DS)    += p5020_ds.o corenet_ds.o
 obj-$(CONFIG_STX_GP3)	  += stx_gp3.o
 obj-$(CONFIG_TQM85xx)	  += tqm85xx.o
-obj-$(CONFIG_SBC8560)     += sbc8560.o
 obj-$(CONFIG_SBC8548)     += sbc8548.o
 obj-$(CONFIG_SOCRATES)    += socrates.o socrates_fpga_pic.o
 obj-$(CONFIG_KSI8560)	  += ksi8560.o
diff --git a/arch/powerpc/platforms/85xx/sbc8560.c b/arch/powerpc/platforms/85xx/sbc8560.c
deleted file mode 100644
index b1be632ede43..000000000000
--- a/arch/powerpc/platforms/85xx/sbc8560.c
+++ /dev/null
@@ -1,254 +0,0 @@
-/*
- * Wind River SBC8560 setup and early boot code.
- *
- * Copyright 2007 Wind River Systems Inc.
- *
- * By Paul Gortmaker (see MAINTAINERS for contact information)
- *
- * Based largely on the MPC8560ADS support - Copyright 2005 Freescale Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/stddef.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/kdev_t.h>
-#include <linux/delay.h>
-#include <linux/seq_file.h>
-#include <linux/of_platform.h>
-
-#include <asm/time.h>
-#include <asm/machdep.h>
-#include <asm/pci-bridge.h>
-#include <asm/mpic.h>
-#include <mm/mmu_decl.h>
-#include <asm/udbg.h>
-
-#include <sysdev/fsl_soc.h>
-#include <sysdev/fsl_pci.h>
-
-#include "mpc85xx.h"
-
-#ifdef CONFIG_CPM2
-#include <asm/cpm2.h>
-#include <sysdev/cpm2_pic.h>
-#endif
-
-static void __init sbc8560_pic_init(void)
-{
-	struct mpic *mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN,
-			0, 256, " OpenPIC  ");
-	BUG_ON(mpic == NULL);
-	mpic_init(mpic);
-
-	mpc85xx_cpm2_pic_init();
-}
-
-/*
- * Setup the architecture
- */
-#ifdef CONFIG_CPM2
-struct cpm_pin {
-	int port, pin, flags;
-};
-
-static const struct cpm_pin sbc8560_pins[] = {
-	/* SCC1 */
-	{3, 29, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
-	{3, 30, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
-	{3, 31, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
-
-	/* SCC2 */
-	{3, 26, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
-	{3, 27, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
-	{3, 28, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
-
-	/* FCC2 */
-	{1, 18, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
-	{1, 19, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
-	{1, 20, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
-	{1, 21, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
-	{1, 22, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
-	{1, 23, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
-	{1, 24, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
-	{1, 25, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
-	{1, 26, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
-	{1, 27, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
-	{1, 28, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
-	{1, 29, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
-	{1, 30, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
-	{1, 31, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
-	{2, 18, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, /* CLK14 */
-	{2, 19, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, /* CLK13 */
-
-	/* FCC3 */
-	{1, 4, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
-	{1, 5, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
-	{1, 6, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
-	{1, 7, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
-	{1, 8, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
-	{1, 9, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
-	{1, 10, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
-	{1, 11, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
-	{1, 12, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
-	{1, 13, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
-	{1, 14, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
-	{1, 15, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
-	{1, 16, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
-	{1, 17, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
-	{2, 16, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* CLK16 */
-	{2, 17, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* CLK15 */
-};
-
-static void __init init_ioports(void)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(sbc8560_pins); i++) {
-		const struct cpm_pin *pin = &sbc8560_pins[i];
-		cpm2_set_pin(pin->port, pin->pin, pin->flags);
-	}
-
-	cpm2_clk_setup(CPM_CLK_SCC1, CPM_BRG1, CPM_CLK_RX);
-	cpm2_clk_setup(CPM_CLK_SCC1, CPM_BRG1, CPM_CLK_TX);
-	cpm2_clk_setup(CPM_CLK_SCC2, CPM_BRG2, CPM_CLK_RX);
-	cpm2_clk_setup(CPM_CLK_SCC2, CPM_BRG2, CPM_CLK_TX);
-	cpm2_clk_setup(CPM_CLK_FCC2, CPM_CLK13, CPM_CLK_RX);
-	cpm2_clk_setup(CPM_CLK_FCC2, CPM_CLK14, CPM_CLK_TX);
-	cpm2_clk_setup(CPM_CLK_FCC3, CPM_CLK15, CPM_CLK_RX);
-	cpm2_clk_setup(CPM_CLK_FCC3, CPM_CLK16, CPM_CLK_TX);
-}
-#endif
-
-static void __init sbc8560_setup_arch(void)
-{
-#ifdef CONFIG_PCI
-	struct device_node *np;
-#endif
-
-	if (ppc_md.progress)
-		ppc_md.progress("sbc8560_setup_arch()", 0);
-
-#ifdef CONFIG_CPM2
-	cpm2_reset();
-	init_ioports();
-#endif
-
-#ifdef CONFIG_PCI
-	for_each_compatible_node(np, "pci", "fsl,mpc8540-pci")
-		fsl_add_bridge(np, 1);
-#endif
-}
-
-static void sbc8560_show_cpuinfo(struct seq_file *m)
-{
-	uint pvid, svid, phid1;
-
-	pvid = mfspr(SPRN_PVR);
-	svid = mfspr(SPRN_SVR);
-
-	seq_printf(m, "Vendor\t\t: Wind River\n");
-	seq_printf(m, "PVR\t\t: 0x%x\n", pvid);
-	seq_printf(m, "SVR\t\t: 0x%x\n", svid);
-
-	/* Display cpu Pll setting */
-	phid1 = mfspr(SPRN_HID1);
-	seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f));
-}
-
-machine_device_initcall(sbc8560, mpc85xx_common_publish_devices);
-
-/*
- * Called very early, device-tree isn't unflattened
- */
-static int __init sbc8560_probe(void)
-{
-        unsigned long root = of_get_flat_dt_root();
-
-        return of_flat_dt_is_compatible(root, "SBC8560");
-}
-
-#ifdef CONFIG_RTC_DRV_M48T59
-static int __init sbc8560_rtc_init(void)
-{
-	struct device_node *np;
-	struct resource res;
-	struct platform_device *rtc_dev;
-
-	np = of_find_compatible_node(NULL, NULL, "m48t59");
-	if (np == NULL) {
-		printk("No RTC in DTB. Has it been eaten by wild dogs?\n");
-		return -ENODEV;
-	}
-
-	of_address_to_resource(np, 0, &res);
-	of_node_put(np);
-
-	printk("Found RTC (m48t59) at i/o 0x%x\n", res.start);
-
-	rtc_dev = platform_device_register_simple("rtc-m48t59", 0, &res, 1);
-
-	if (IS_ERR(rtc_dev)) {
-		printk("Registering sbc8560 RTC device failed\n");
-		return PTR_ERR(rtc_dev);
-	}
-
-	return 0;
-}
-
-arch_initcall(sbc8560_rtc_init);
-
-#endif	/* M48T59 */
-
-static __u8 __iomem *brstcr;
-
-static int __init sbc8560_bdrstcr_init(void)
-{
-	struct device_node *np;
-	struct resource res;
-
-	np = of_find_compatible_node(NULL, NULL, "wrs,sbc8560-brstcr");
-	if (np == NULL) {
-		printk(KERN_WARNING "sbc8560: No board specific RSTCR in DTB.\n");
-		return -ENODEV;
-	}
-
-	of_address_to_resource(np, 0, &res);
-
-	printk(KERN_INFO "sbc8560: Found BRSTCR at %pR\n", &res);
-
-	brstcr = ioremap(res.start, resource_size(&res));
-	if(!brstcr)
-		printk(KERN_WARNING "sbc8560: ioremap of brstcr failed.\n");
-
-	of_node_put(np);
-
-	return 0;
-}
-
-arch_initcall(sbc8560_bdrstcr_init);
-
-void sbc8560_rstcr_restart(char * cmd)
-{
-	local_irq_disable();
-	if(brstcr)
-		clrbits8(brstcr, 0x80);
-
-	while(1);
-}
-
-define_machine(sbc8560) {
-	.name			= "SBC8560",
-	.probe			= sbc8560_probe,
-	.setup_arch		= sbc8560_setup_arch,
-	.init_IRQ		= sbc8560_pic_init,
-	.show_cpuinfo		= sbc8560_show_cpuinfo,
-	.get_irq		= mpic_get_irq,
-	.restart		= sbc8560_rstcr_restart,
-	.calibrate_decr		= generic_calibrate_decr,
-	.progress		= udbg_progress,
-};