powerpc/powernv/pci: Add explicit tracking of the DMA setup state

There's an optimisation in the PE setup which skips performing DMA
setup for a PE if we only have bridges in a PE. The assumption being
that only "real" devices will DMA to system memory, which is probably
fair. However, if we start off with only bridge devices in a PE then
add a non-bridge device the new device won't be able to use DMA because
we never configured it.

Fix this (admittedly pretty weird) edge case by tracking whether we've done
the DMA setup for the PE or not. If a non-bridge device is added to the PE
(via rescan or hotplug, or whatever) we can set up DMA on demand.

This also means the only remaining user of the old "DMA Weight" code is
the IODA1 DMA setup code that it was originally added for, which is good.

Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200722065715.1432738-3-oohall@gmail.com

1 files changed, 29 insertions, 19 deletions

diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
index bfb40607aa0e..bb9c1cc60c33 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -141,6 +141,7 @@ static struct pnv_ioda_pe *pnv_ioda_init_pe(struct pnv_phb *phb, int pe_no)
 
 	phb->ioda.pe_array[pe_no].phb = phb;
 	phb->ioda.pe_array[pe_no].pe_number = pe_no;
+	phb->ioda.pe_array[pe_no].dma_setup_done = false;
 
 	/*
 	 * Clear the PE frozen state as it might be put into frozen state
@@ -1685,6 +1686,12 @@ static int pnv_pcibios_sriov_enable(struct pci_dev *pdev, u16 num_vfs)
 }
 #endif /* CONFIG_PCI_IOV */
 
+static void pnv_pci_ioda1_setup_dma_pe(struct pnv_phb *phb,
+				       struct pnv_ioda_pe *pe);
+
+static void pnv_pci_ioda2_setup_dma_pe(struct pnv_phb *phb,
+				       struct pnv_ioda_pe *pe);
+
 static void pnv_pci_ioda_dma_dev_setup(struct pci_dev *pdev)
 {
 	struct pnv_phb *phb = pci_bus_to_pnvhb(pdev->bus);
@@ -1713,6 +1720,24 @@ static void pnv_pci_ioda_dma_dev_setup(struct pci_dev *pdev)
 		pci_info(pdev, "Added to existing PE#%x\n", pe->pe_number);
 	}
 
+	/*
+	 * We assume that bridges *probably* don't need to do any DMA so we can
+	 * skip allocating a TCE table, etc unless we get a non-bridge device.
+	 */
+	if (!pe->dma_setup_done && !pci_is_bridge(pdev)) {
+		switch (phb->type) {
+		case PNV_PHB_IODA1:
+			pnv_pci_ioda1_setup_dma_pe(phb, pe);
+			break;
+		case PNV_PHB_IODA2:
+			pnv_pci_ioda2_setup_dma_pe(phb, pe);
+			break;
+		default:
+			pr_warn("%s: No DMA for PHB#%x (type %d)\n",
+				__func__, phb->hose->global_number, phb->type);
+		}
+	}
+
 	if (pdn)
 		pdn->pe_number = pe->pe_number;
 	pe->device_count++;
@@ -2222,6 +2247,7 @@ found:
 	pe->table_group.tce32_size = tbl->it_size << tbl->it_page_shift;
 	iommu_init_table(tbl, phb->hose->node, 0, 0);
 
+	pe->dma_setup_done = true;
 	return;
  fail:
 	/* XXX Failure: Try to fallback to 64-bit only ? */
@@ -2536,9 +2562,6 @@ static void pnv_pci_ioda2_setup_dma_pe(struct pnv_phb *phb,
 {
 	int64_t rc;
 
-	if (!pnv_pci_ioda_pe_dma_weight(pe))
-		return;
-
 	/* TVE #1 is selected by PCI address bit 59 */
 	pe->tce_bypass_base = 1ull << 59;
 
@@ -2563,6 +2586,7 @@ static void pnv_pci_ioda2_setup_dma_pe(struct pnv_phb *phb,
 	iommu_register_group(&pe->table_group, phb->hose->global_number,
 			     pe->pe_number);
 #endif
+	pe->dma_setup_done = true;
 }
 
 int64_t pnv_opal_pci_msi_eoi(struct irq_chip *chip, unsigned int hw_irq)
@@ -3136,7 +3160,6 @@ static void pnv_pci_fixup_bridge_resources(struct pci_bus *bus,
 
 static void pnv_pci_configure_bus(struct pci_bus *bus)
 {
-	struct pnv_phb *phb = pci_bus_to_pnvhb(bus);
 	struct pci_dev *bridge = bus->self;
 	struct pnv_ioda_pe *pe;
 	bool all = (bridge && pci_pcie_type(bridge) == PCI_EXP_TYPE_PCI_BRIDGE);
@@ -3160,17 +3183,6 @@ static void pnv_pci_configure_bus(struct pci_bus *bus)
 		return;
 
 	pnv_ioda_setup_pe_seg(pe);
-	switch (phb->type) {
-	case PNV_PHB_IODA1:
-		pnv_pci_ioda1_setup_dma_pe(phb, pe);
-		break;
-	case PNV_PHB_IODA2:
-		pnv_pci_ioda2_setup_dma_pe(phb, pe);
-		break;
-	default:
-		pr_warn("%s: No DMA for PHB#%x (type %d)\n",
-			__func__, phb->hose->global_number, phb->type);
-	}
 }
 
 static resource_size_t pnv_pci_default_alignment(void)
@@ -3289,11 +3301,10 @@ static long pnv_pci_ioda1_unset_window(struct iommu_table_group *table_group,
 
 static void pnv_pci_ioda1_release_pe_dma(struct pnv_ioda_pe *pe)
 {
-	unsigned int weight = pnv_pci_ioda_pe_dma_weight(pe);
 	struct iommu_table *tbl = pe->table_group.tables[0];
 	int64_t rc;
 
-	if (!weight)
+	if (!pe->dma_setup_done)
 		return;
 
 	rc = pnv_pci_ioda1_unset_window(&pe->table_group, 0);
@@ -3313,10 +3324,9 @@ static void pnv_pci_ioda1_release_pe_dma(struct pnv_ioda_pe *pe)
 static void pnv_pci_ioda2_release_pe_dma(struct pnv_ioda_pe *pe)
 {
 	struct iommu_table *tbl = pe->table_group.tables[0];
-	unsigned int weight = pnv_pci_ioda_pe_dma_weight(pe);
 	int64_t rc;
 
-	if (!weight)
+	if (pe->dma_setup_done)
 		return;
 
 	rc = pnv_pci_ioda2_unset_window(&pe->table_group, 0);