powerpc/eeh: Probe mode support

While EEH module is installed, PCI devices is checked one by one
to see if it supports eeh. On different platforms, the PCI devices
are referred through different ways when the EEH module is loaded.
For example, on pSeries platform, that is done by OF node. However,
we would do that by real PCI devices (struct pci_dev) on PowerNV
platform in future. So we needs some mechanism to differentiate
those cases by classifying them to probe modes, either from OF
nodes or real PCI devices.

The patch implements the support to eeh probe mode. Also, the
EEH on pSeries has set it into EEH_PROBE_MODE_DEVTREE. That means
the probe will be done based on OF nodes on pSeries platform.

In addition, On pSeries platform, it's done by OF nodes. The patch
moves the the probe function from EEH core to platform dependent
backend and some cleanup applied.

Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

1 files changed, 22 insertions, 109 deletions

diff --git a/arch/powerpc/platforms/pseries/eeh.c b/arch/powerpc/platforms/pseries/eeh.c
index 6d4323025793..4bdc278c2fd7 100644
--- a/arch/powerpc/platforms/pseries/eeh.c
+++ b/arch/powerpc/platforms/pseries/eeh.c
@@ -92,6 +92,17 @@ struct eeh_ops *eeh_ops = NULL;
 int eeh_subsystem_enabled;
 EXPORT_SYMBOL(eeh_subsystem_enabled);
 
+/*
+ * EEH probe mode support. The intention is to support multiple
+ * platforms for EEH. Some platforms like pSeries do PCI emunation
+ * based on device tree. However, other platforms like powernv probe
+ * PCI devices from hardware. The flag is used to distinguish that.
+ * In addition, struct eeh_ops::probe would be invoked for particular
+ * OF node or PCI device so that the corresponding PE would be created
+ * there.
+ */
+int eeh_probe_mode;
+
 /* Global EEH mutex */
 DEFINE_MUTEX(eeh_mutex);
 
@@ -590,7 +601,7 @@ int eeh_reset_pe(struct eeh_pe *pe)
  * PCI devices are added individually; but, for the restore,
  * an entire slot is reset at a time.
  */
-static void eeh_save_bars(struct eeh_dev *edev)
+void eeh_save_bars(struct eeh_dev *edev)
 {
 	int i;
 	struct device_node *dn;
@@ -604,108 +615,6 @@ static void eeh_save_bars(struct eeh_dev *edev)
 }
 
 /**
- * eeh_early_enable - Early enable EEH on the indicated device
- * @dn: device node
- * @data: BUID
- *
- * Enable EEH functionality on the specified PCI device. The function
- * is expected to be called before real PCI probing is done. However,
- * the PHBs have been initialized at this point.
- */
-static void *eeh_early_enable(struct device_node *dn, void *data)
-{
-	int ret;
-	const u32 *class_code = of_get_property(dn, "class-code", NULL);
-	const u32 *vendor_id = of_get_property(dn, "vendor-id", NULL);
-	const u32 *device_id = of_get_property(dn, "device-id", NULL);
-	const u32 *regs;
-	int enable;
-	struct eeh_dev *edev = of_node_to_eeh_dev(dn);
-	struct eeh_pe pe;
-
-	edev->class_code = 0;
-	edev->mode = 0;
-
-	if (!of_device_is_available(dn))
-		return NULL;
-
-	/* Ignore bad nodes. */
-	if (!class_code || !vendor_id || !device_id)
-		return NULL;
-
-	/* There is nothing to check on PCI to ISA bridges */
-	if (dn->type && !strcmp(dn->type, "isa"))
-		return NULL;
-	edev->class_code = *class_code;
-
-	/* Ok... see if this device supports EEH.  Some do, some don't,
-	 * and the only way to find out is to check each and every one.
-	 */
-	regs = of_get_property(dn, "reg", NULL);
-	if (regs) {
-		/* Initialize the fake PE */
-		memset(&pe, 0, sizeof(struct eeh_pe));
-		pe.phb = edev->phb;
-		pe.config_addr = regs[0];
-
-		/* First register entry is addr (00BBSS00)  */
-		/* Try to enable eeh */
-		ret = eeh_ops->set_option(&pe, EEH_OPT_ENABLE);
-
-		enable = 0;
-		if (ret == 0) {
-			edev->config_addr = regs[0];
-
-			/* If the newer, better, ibm,get-config-addr-info is supported, 
-			 * then use that instead.
-			 */
-			edev->pe_config_addr = eeh_ops->get_pe_addr(&pe);
-			pe.addr = edev->pe_config_addr;
-
-			/* Some older systems (Power4) allow the
-			 * ibm,set-eeh-option call to succeed even on nodes
-			 * where EEH is not supported. Verify support
-			 * explicitly.
-			 */
-			ret = eeh_ops->get_state(&pe, NULL);
-			if (ret > 0 && ret != EEH_STATE_NOT_SUPPORT)
-				enable = 1;
-		}
-
-		if (enable) {
-			eeh_subsystem_enabled = 1;
-
-			eeh_add_to_parent_pe(edev);
-
-			pr_debug("EEH: %s: eeh enabled, config=%x pe_config=%x\n",
-				 dn->full_name, edev->config_addr,
-				 edev->pe_config_addr);
-		} else {
-
-			/* This device doesn't support EEH, but it may have an
-			 * EEH parent, in which case we mark it as supported.
-			 */
-			if (dn->parent && of_node_to_eeh_dev(dn->parent) &&
-			    of_node_to_eeh_dev(dn->parent)->pe) {
-				/* Parent supports EEH. */
-				edev->config_addr = of_node_to_eeh_dev(dn->parent)->config_addr;
-				edev->pe_config_addr = of_node_to_eeh_dev(dn->parent)->pe_config_addr;
-
-				eeh_add_to_parent_pe(edev);
-
-				return NULL;
-			}
-		}
-	} else {
-		printk(KERN_WARNING "EEH: %s: unable to get reg property.\n",
-		       dn->full_name);
-	}
-
-	eeh_save_bars(edev);
-	return NULL;
-}
-
-/**
  * eeh_ops_register - Register platform dependent EEH operations
  * @ops: platform dependent EEH operations
  *
@@ -790,15 +699,18 @@ static int __init eeh_init(void)
 	raw_spin_lock_init(&confirm_error_lock);
 
 	/* Enable EEH for all adapters */
-	list_for_each_entry_safe(hose, tmp, &hose_list, list_node) {
-		phb = hose->dn;
-		traverse_pci_devices(phb, eeh_early_enable, NULL);
+	if (eeh_probe_mode_devtree()) {
+		list_for_each_entry_safe(hose, tmp,
+			&hose_list, list_node) {
+			phb = hose->dn;
+			traverse_pci_devices(phb, eeh_ops->of_probe, NULL);
+		}
 	}
 
 	if (eeh_subsystem_enabled)
-		printk(KERN_INFO "EEH: PCI Enhanced I/O Error Handling Enabled\n");
+		pr_info("EEH: PCI Enhanced I/O Error Handling Enabled\n");
 	else
-		printk(KERN_WARNING "EEH: No capable adapters found\n");
+		pr_warning("EEH: No capable adapters found\n");
 
 	return ret;
 }
@@ -829,7 +741,8 @@ static void eeh_add_device_early(struct device_node *dn)
 	if (NULL == phb || 0 == phb->buid)
 		return;
 
-	eeh_early_enable(dn, NULL);
+	/* FIXME: hotplug support on POWERNV */
+	eeh_ops->of_probe(dn, NULL);
 }
 
 /**