powerpc/eeh: Make early EEH init pseries specific

The eeh_ops->probe() function is called from two different contexts:

1. On pseries, where we set EEH_PROBE_MODE_DEVTREE, it's called in
   eeh_add_device_early() which is supposed to run before we create
   a pci_dev.

2. On PowerNV, where we set EEH_PROBE_MODE_DEV, it's called in
   eeh_device_add_late() which is supposed to run *after* the
   pci_dev is created.

The "early" probe is required because PAPR requires that we perform an RTAS
call to enable EEH support on a device before we start interacting with it
via config space or MMIO. This requirement doesn't exist on PowerNV and
shoehorning two completely separate initialisation paths into a common
interface just results in a convoluted code everywhere.

Additionally the early probe requires the probe function to take an pci_dn
rather than a pci_dev argument. We'd like to make pci_dn a pseries specific
data structure since there's no real requirement for them on PowerNV. To
help both goals move the early probe into the pseries containment zone
so the platform depedence is more explicit.

Reviewed-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200306073904.4737-5-oohall@gmail.com

1 files changed, 51 insertions, 14 deletions

diff --git a/arch/powerpc/platforms/pseries/eeh_pseries.c b/arch/powerpc/platforms/pseries/eeh_pseries.c
index 95bbf9102584..1ca7cf0fc0d8 100644
--- a/arch/powerpc/platforms/pseries/eeh_pseries.c
+++ b/arch/powerpc/platforms/pseries/eeh_pseries.c
@@ -67,7 +67,7 @@ void pseries_pcibios_bus_add_device(struct pci_dev *pdev)
 		pdn->pe_number  =  physfn_pdn->pe_num_map[pdn->vf_index];
 	}
 #endif
-	eeh_add_device_early(pdn);
+	pseries_eeh_init_edev(pdn);
 #ifdef CONFIG_PCI_IOV
 	if (pdev->is_virtfn) {
 		struct eeh_dev *edev = pdn_to_eeh_dev(pdn);
@@ -221,15 +221,16 @@ static int pseries_eeh_find_ecap(struct pci_dn *pdn, int cap)
 }
 
 /**
- * pseries_eeh_probe - EEH probe on the given device
+ * pseries_eeh_init_edev - initialise the eeh_dev and eeh_pe for a pci_dn
+ *
  * @pdn: PCI device node
- * @data: Unused
  *
- * When EEH module is installed during system boot, all PCI devices
- * are checked one by one to see if it supports EEH. The function
- * is introduced for the purpose.
+ * When we discover a new PCI device via the device-tree we create a
+ * corresponding pci_dn and we allocate, but don't initialise, an eeh_dev.
+ * This function takes care of the initialisation and inserts the eeh_dev
+ * into the correct eeh_pe. If no eeh_pe exists we'll allocate one.
  */
-static void *pseries_eeh_probe(struct pci_dn *pdn, void *data)
+void pseries_eeh_init_edev(struct pci_dn *pdn)
 {
 	struct eeh_dev *edev;
 	struct eeh_pe pe;
@@ -237,18 +238,35 @@ static void *pseries_eeh_probe(struct pci_dn *pdn, void *data)
 	int enable = 0;
 	int ret;
 
-	/* Retrieve OF node and eeh device */
+	if (WARN_ON_ONCE(!eeh_has_flag(EEH_PROBE_MODE_DEVTREE)))
+		return;
+
+	/*
+	 * Find the eeh_dev for this pdn. The storage for the eeh_dev was
+	 * allocated at the same time as the pci_dn.
+	 *
+	 * XXX: We should probably re-visit that.
+	 */
 	edev = pdn_to_eeh_dev(pdn);
-	if (!edev || edev->pe)
-		return NULL;
+	if (!edev)
+		return;
+
+	/*
+	 * If ->pe is set then we've already probed this device. We hit
+	 * this path when a pci_dev is removed and rescanned while recovering
+	 * a PE (i.e. for devices where the driver doesn't support error
+	 * recovery).
+	 */
+	if (edev->pe)
+		return;
 
 	/* Check class/vendor/device IDs */
 	if (!pdn->vendor_id || !pdn->device_id || !pdn->class_code)
-		return NULL;
+		return;
 
 	/* Skip for PCI-ISA bridge */
         if ((pdn->class_code >> 8) == PCI_CLASS_BRIDGE_ISA)
-		return NULL;
+		return;
 
 	eeh_edev_dbg(edev, "Probing device\n");
 
@@ -315,9 +333,29 @@ static void *pseries_eeh_probe(struct pci_dn *pdn, void *data)
 
 	/* Save memory bars */
 	eeh_save_bars(edev);
+}
+
+/**
+ * pseries_eeh_init_edev_recursive - Enable EEH for the indicated device
+ * @pdn: PCI device node
+ *
+ * This routine must be used to perform EEH initialization for the
+ * indicated PCI device that was added after system boot (e.g.
+ * hotplug, dlpar).
+ */
+void pseries_eeh_init_edev_recursive(struct pci_dn *pdn)
+{
+	struct pci_dn *n;
+
+	if (!pdn)
+		return;
+
+	list_for_each_entry(n, &pdn->child_list, list)
+		pseries_eeh_init_edev_recursive(n);
 
-	return NULL;
+	pseries_eeh_init_edev(pdn);
 }
+EXPORT_SYMBOL_GPL(pseries_eeh_init_edev_recursive);
 
 /**
  * pseries_eeh_set_option - Initialize EEH or MMIO/DMA reenable
@@ -775,7 +813,6 @@ static int pseries_notify_resume(struct pci_dn *pdn)
 static struct eeh_ops pseries_eeh_ops = {
 	.name			= "pseries",
 	.init			= pseries_eeh_init,
-	.probe			= pseries_eeh_probe,
 	.set_option		= pseries_eeh_set_option,
 	.get_pe_addr		= pseries_eeh_get_pe_addr,
 	.get_state		= pseries_eeh_get_state,