powerpc/eeh: EEH for pSeries hot plug

On PowerNV and pSeries, devices currently acquire EEH support from
several different places: Boot-time devices from eeh_probe_devices()
and eeh_addr_cache_build(), Virtual Function devices from the pcibios
bus add device hooks and hot plugged devices from pci_hp_add_devices()
(with other platforms using other methods as well).  Unfortunately,
pSeries machines currently discover hot plugged devices using
pci_rescan_bus(), not pci_hp_add_devices(), and so those devices do
not receive EEH support.

Rather than adding another case for pci_rescan_bus(), this change
widens the scope of the pcibios bus add device hooks so that they can
handle all devices. As a side effect this also supports devices
discovered after manually rescanning via /sys/bus/pci/rescan.

Note that on PowerNV, this change allows the EEH subsystem to become
enabled after boot as long as it has not been forced off, which was
not previously possible (it was already possible on pSeries).

Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/72ae8ae9c54097158894a52de23690448de38ea9.1565930772.git.sbobroff@linux.ibm.com

1 files changed, 26 insertions, 28 deletions

diff --git a/arch/powerpc/platforms/pseries/eeh_pseries.c b/arch/powerpc/platforms/pseries/eeh_pseries.c
index 83ee69d22022..02454c737d11 100644
--- a/arch/powerpc/platforms/pseries/eeh_pseries.c
+++ b/arch/powerpc/platforms/pseries/eeh_pseries.c
@@ -42,44 +42,44 @@ static int ibm_get_config_addr_info;
 static int ibm_get_config_addr_info2;
 static int ibm_configure_pe;
 
-#ifdef CONFIG_PCI_IOV
 void pseries_pcibios_bus_add_device(struct pci_dev *pdev)
 {
 	struct pci_dn *pdn = pci_get_pdn(pdev);
-	struct pci_dn *physfn_pdn;
-	struct eeh_dev *edev;
 
-	if (!pdev->is_virtfn)
+	if (eeh_has_flag(EEH_FORCE_DISABLED))
 		return;
 
 	pr_debug("%s: EEH: Setting up device %s.\n", __func__, pci_name(pdev));
+#ifdef CONFIG_PCI_IOV
+	if (pdev->is_virtfn) {
+		struct pci_dn *physfn_pdn;
 
-	pdn->device_id  =  pdev->device;
-	pdn->vendor_id  =  pdev->vendor;
-	pdn->class_code =  pdev->class;
-	/*
-	 * Last allow unfreeze return code used for retrieval
-	 * by user space in eeh-sysfs to show the last command
-	 * completion from platform.
-	 */
-	pdn->last_allow_rc =  0;
-	physfn_pdn      =  pci_get_pdn(pdev->physfn);
-	pdn->pe_number  =  physfn_pdn->pe_num_map[pdn->vf_index];
-	edev = pdn_to_eeh_dev(pdn);
-
-	/*
-	 * The following operations will fail if VF's sysfs files
-	 * aren't created or its resources aren't finalized.
-	 */
+		pdn->device_id  =  pdev->device;
+		pdn->vendor_id  =  pdev->vendor;
+		pdn->class_code =  pdev->class;
+		/*
+		 * Last allow unfreeze return code used for retrieval
+		 * by user space in eeh-sysfs to show the last command
+		 * completion from platform.
+		 */
+		pdn->last_allow_rc =  0;
+		physfn_pdn      =  pci_get_pdn(pdev->physfn);
+		pdn->pe_number  =  physfn_pdn->pe_num_map[pdn->vf_index];
+	}
+#endif
 	eeh_add_device_early(pdn);
 	eeh_add_device_late(pdev);
-	edev->pe_config_addr =  (pdn->busno << 16) | (pdn->devfn << 8);
-	eeh_rmv_from_parent_pe(edev); /* Remove as it is adding to bus pe */
-	eeh_add_to_parent_pe(edev);   /* Add as VF PE type */
-	eeh_sysfs_add_device(pdev);
+#ifdef CONFIG_PCI_IOV
+	if (pdev->is_virtfn) {
+		struct eeh_dev *edev = pdn_to_eeh_dev(pdn);
 
-}
+		edev->pe_config_addr =  (pdn->busno << 16) | (pdn->devfn << 8);
+		eeh_rmv_from_parent_pe(edev); /* Remove as it is adding to bus pe */
+		eeh_add_to_parent_pe(edev);   /* Add as VF PE type */
+	}
 #endif
+	eeh_sysfs_add_device(pdev);
+}
 
 /*
  * Buffer for reporting slot-error-detail rtas calls. Its here
@@ -146,10 +146,8 @@ static int pseries_eeh_init(void)
 	/* Set EEH probe mode */
 	eeh_add_flag(EEH_PROBE_MODE_DEVTREE | EEH_ENABLE_IO_FOR_LOG);
 
-#ifdef CONFIG_PCI_IOV
 	/* Set EEH machine dependent code */
 	ppc_md.pcibios_bus_add_device = pseries_pcibios_bus_add_device;
-#endif
 
 	return 0;
 }