powerpc/powernv: Enable PCI peer-to-peer

P9 has support for PCI peer-to-peer, enabling a device to write in the
MMIO space of another device directly, without interrupting the CPU.

This patch adds support for it on powernv, by adding a new API to be
called by drivers. The pnv_pci_set_p2p(...) call configures an
'initiator', i.e the device which will issue the MMIO operation, and a
'target', i.e. the device on the receiving side.

P9 really only supports MMIO stores for the time being but that's
expected to change in the future, so the API allows to define both
load and store operations.

  /* PCI p2p descriptor */
  #define OPAL_PCI_P2P_ENABLE           0x1
  #define OPAL_PCI_P2P_LOAD             0x2
  #define OPAL_PCI_P2P_STORE            0x4

  int pnv_pci_set_p2p(struct pci_dev *initiator, struct pci_dev *target,
                      u64 desc)

It uses a new OPAL call, as the configuration magic is done on the
PHBs by skiboot.

Signed-off-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com>
Reviewed-by: Russell Currey <ruscur@russell.cc>
[mpe: Drop unrelated OPAL calls, s/uint64_t/u64/, minor formatting]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

4 files changed, 82 insertions, 2 deletions

diff --git a/arch/powerpc/platforms/powernv/opal-wrappers.S b/arch/powerpc/platforms/powernv/opal-wrappers.S
index b77f52ee8263..3369a6f2b2f1 100644
--- a/arch/powerpc/platforms/powernv/opal-wrappers.S
+++ b/arch/powerpc/platforms/powernv/opal-wrappers.S
@@ -313,3 +313,4 @@ OPAL_CALL(opal_npu_map_lpar,			OPAL_NPU_MAP_LPAR);
 OPAL_CALL(opal_imc_counters_init,		OPAL_IMC_COUNTERS_INIT);
 OPAL_CALL(opal_imc_counters_start,		OPAL_IMC_COUNTERS_START);
 OPAL_CALL(opal_imc_counters_stop,		OPAL_IMC_COUNTERS_STOP);
+OPAL_CALL(opal_pci_set_p2p,			OPAL_PCI_SET_P2P);
diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
index 437613588df1..026a06c51458 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -1408,7 +1408,6 @@ m64_failed:
 
 static long pnv_pci_ioda2_unset_window(struct iommu_table_group *table_group,
 		int num);
-static void pnv_pci_ioda2_set_bypass(struct pnv_ioda_pe *pe, bool enable);
 
 static void pnv_pci_ioda2_release_dma_pe(struct pci_dev *dev, struct pnv_ioda_pe *pe)
 {
@@ -2394,7 +2393,7 @@ static long pnv_pci_ioda2_set_window(struct iommu_table_group *table_group,
 	return 0;
 }
 
-static void pnv_pci_ioda2_set_bypass(struct pnv_ioda_pe *pe, bool enable)
+void pnv_pci_ioda2_set_bypass(struct pnv_ioda_pe *pe, bool enable)
 {
 	uint16_t window_id = (pe->pe_number << 1 ) + 1;
 	int64_t rc;
diff --git a/arch/powerpc/platforms/powernv/pci.c b/arch/powerpc/platforms/powernv/pci.c
index 7905d179d036..5422f4a6317c 100644
--- a/arch/powerpc/platforms/powernv/pci.c
+++ b/arch/powerpc/platforms/powernv/pci.c
@@ -37,6 +37,8 @@
 #include "powernv.h"
 #include "pci.h"
 
+static DEFINE_MUTEX(p2p_mutex);
+
 int pnv_pci_get_slot_id(struct device_node *np, uint64_t *id)
 {
 	struct device_node *parent = np;
@@ -1017,6 +1019,79 @@ void pnv_pci_dma_bus_setup(struct pci_bus *bus)
 	}
 }
 
+int pnv_pci_set_p2p(struct pci_dev *initiator, struct pci_dev *target, u64 desc)
+{
+	struct pci_controller *hose;
+	struct pnv_phb *phb_init, *phb_target;
+	struct pnv_ioda_pe *pe_init;
+	int rc;
+
+	if (!opal_check_token(OPAL_PCI_SET_P2P))
+		return -ENXIO;
+
+	hose = pci_bus_to_host(initiator->bus);
+	phb_init = hose->private_data;
+
+	hose = pci_bus_to_host(target->bus);
+	phb_target = hose->private_data;
+
+	pe_init = pnv_ioda_get_pe(initiator);
+	if (!pe_init)
+		return -ENODEV;
+
+	/*
+	 * Configuring the initiator's PHB requires to adjust its
+	 * TVE#1 setting. Since the same device can be an initiator
+	 * several times for different target devices, we need to keep
+	 * a reference count to know when we can restore the default
+	 * bypass setting on its TVE#1 when disabling. Opal is not
+	 * tracking PE states, so we add a reference count on the PE
+	 * in linux.
+	 *
+	 * For the target, the configuration is per PHB, so we keep a
+	 * target reference count on the PHB.
+	 */
+	mutex_lock(&p2p_mutex);
+
+	if (desc & OPAL_PCI_P2P_ENABLE) {
+		/* always go to opal to validate the configuration */
+		rc = opal_pci_set_p2p(phb_init->opal_id, phb_target->opal_id,
+				      desc, pe_init->pe_number);
+
+		if (rc != OPAL_SUCCESS) {
+			rc = -EIO;
+			goto out;
+		}
+
+		pe_init->p2p_initiator_count++;
+		phb_target->p2p_target_count++;
+	} else {
+		if (!pe_init->p2p_initiator_count ||
+			!phb_target->p2p_target_count) {
+			rc = -EINVAL;
+			goto out;
+		}
+
+		if (--pe_init->p2p_initiator_count == 0)
+			pnv_pci_ioda2_set_bypass(pe_init, true);
+
+		if (--phb_target->p2p_target_count == 0) {
+			rc = opal_pci_set_p2p(phb_init->opal_id,
+					      phb_target->opal_id, desc,
+					      pe_init->pe_number);
+			if (rc != OPAL_SUCCESS) {
+				rc = -EIO;
+				goto out;
+			}
+		}
+	}
+	rc = 0;
+out:
+	mutex_unlock(&p2p_mutex);
+	return rc;
+}
+EXPORT_SYMBOL_GPL(pnv_pci_set_p2p);
+
 void pnv_pci_shutdown(void)
 {
 	struct pci_controller *hose;
diff --git a/arch/powerpc/platforms/powernv/pci.h b/arch/powerpc/platforms/powernv/pci.h
index f16bc403ec03..a95273c524f6 100644
--- a/arch/powerpc/platforms/powernv/pci.h
+++ b/arch/powerpc/platforms/powernv/pci.h
@@ -78,6 +78,9 @@ struct pnv_ioda_pe {
 	struct pnv_ioda_pe	*master;
 	struct list_head	slaves;
 
+	/* PCI peer-to-peer*/
+	int			p2p_initiator_count;
+
 	/* Link in list of PE#s */
 	struct list_head	list;
 };
@@ -189,6 +192,7 @@ struct pnv_phb {
 #ifdef CONFIG_CXL_BASE
 	struct cxl_afu *cxl_afu;
 #endif
+	int p2p_target_count;
 };
 
 extern struct pci_ops pnv_pci_ops;
@@ -229,6 +233,7 @@ extern void pnv_teardown_msi_irqs(struct pci_dev *pdev);
 extern struct pnv_ioda_pe *pnv_ioda_get_pe(struct pci_dev *dev);
 extern void pnv_set_msi_irq_chip(struct pnv_phb *phb, unsigned int virq);
 extern bool pnv_pci_enable_device_hook(struct pci_dev *dev);
+extern void pnv_pci_ioda2_set_bypass(struct pnv_ioda_pe *pe, bool enable);
 
 extern void pe_level_printk(const struct pnv_ioda_pe *pe, const char *level,
 			    const char *fmt, ...);