Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 80 insertions, 0 deletions

diff --git a/arch/ppc/platforms/85xx/mpc85xx_cds_common.h b/arch/ppc/platforms/85xx/mpc85xx_cds_common.h
new file mode 100644
index 000000000000..7627d77504bd
--- /dev/null
+++ b/arch/ppc/platforms/85xx/mpc85xx_cds_common.h
@@ -0,0 +1,80 @@
+/*
+ * arch/ppc/platforms/85xx/mpc85xx_cds_common.h
+ *
+ * MPC85xx CDS board definitions
+ *
+ * Maintainer: Kumar Gala <kumar.gala@freescale.com>
+ *
+ * Copyright 2004 Freescale Semiconductor, Inc
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+
+#ifndef __MACH_MPC85XX_CDS_H__
+#define __MACH_MPC85XX_CDS_H__
+
+#include <linux/config.h>
+#include <linux/serial.h>
+#include <asm/ppcboot.h>
+#include <linux/initrd.h>
+#include <syslib/ppc85xx_setup.h>
+
+#define BOARD_CCSRBAR           ((uint)0xe0000000)
+#define CCSRBAR_SIZE            ((uint)1024*1024)
+
+/* CADMUS info */
+#define CADMUS_BASE (0xf8004000)
+#define CADMUS_SIZE (256)
+#define CM_VER	(0)
+#define CM_CSR	(1)
+#define CM_RST	(2)
+
+/* CDS NVRAM/RTC */
+#define CDS_RTC_ADDR	(0xf8000000)
+#define CDS_RTC_SIZE	(8 * 1024)
+
+/* PCI config */
+#define PCI1_CFG_ADDR_OFFSET	(0x8000)
+#define PCI1_CFG_DATA_OFFSET	(0x8004)
+
+#define PCI2_CFG_ADDR_OFFSET	(0x9000)
+#define PCI2_CFG_DATA_OFFSET	(0x9004)
+
+/* PCI interrupt controller */
+#define PIRQ0A                   MPC85xx_IRQ_EXT0
+#define PIRQ0B                   MPC85xx_IRQ_EXT1
+#define PIRQ0C                   MPC85xx_IRQ_EXT2
+#define PIRQ0D                   MPC85xx_IRQ_EXT3
+#define PIRQ1A                   MPC85xx_IRQ_EXT11
+
+/* PCI 1 memory map */
+#define MPC85XX_PCI1_LOWER_IO        0x00000000
+#define MPC85XX_PCI1_UPPER_IO        0x00ffffff
+
+#define MPC85XX_PCI1_LOWER_MEM       0x80000000
+#define MPC85XX_PCI1_UPPER_MEM       0x9fffffff
+
+#define MPC85XX_PCI1_IO_BASE         0xe2000000
+#define MPC85XX_PCI1_MEM_OFFSET      0x00000000
+
+#define MPC85XX_PCI1_IO_SIZE         0x01000000
+
+/* PCI 2 memory map */
+/* Note: the standard PPC fixups will cause IO space to get bumped by
+ * hose->io_base_virt - isa_io_base => MPC85XX_PCI1_IO_SIZE */
+#define MPC85XX_PCI2_LOWER_IO        0x00000000
+#define MPC85XX_PCI2_UPPER_IO        0x00ffffff
+
+#define MPC85XX_PCI2_LOWER_MEM       0xa0000000
+#define MPC85XX_PCI2_UPPER_MEM       0xbfffffff
+
+#define MPC85XX_PCI2_IO_BASE         0xe3000000
+#define MPC85XX_PCI2_MEM_OFFSET      0x00000000
+
+#define MPC85XX_PCI2_IO_SIZE         0x01000000
+
+#endif /* __MACH_MPC85XX_CDS_H__ */