diff options
| author |   Kumar Gala <galak@freescale.com> | 2005-07-27 11:44:07 -0700 |
|---|---|---|
| committer |   Linus Torvalds <torvalds@g5.osdl.org> | 2005-07-27 16:25:55 -0700 |
| commit | 13e886c3b435d14668aefaed449d8d7ca6dce3a8 (patch) | |
| tree | 562cc3afcd251dd637d5a35e516220bb42d4b92b /arch/ppc/platforms/sandpoint.c | |
| parent | [PATCH] ppc32: Add proper prototype for cpm2_reset() (diff) | |
| download | linux-dev-13e886c3b435d14668aefaed449d8d7ca6dce3a8.tar.xz linux-dev-13e886c3b435d14668aefaed449d8d7ca6dce3a8.zip | |
[PATCH] ppc32: Make the UARTs on MPC824x individual platform devices
The UARTs on the MPC824x are unique devices and really shouldn't be thought
of as a DUART. In addition, if both UARTs are in use we need to configure
the part to enable the 2nd UART since the pins for the UARTs are
multiplexed. Adds support to run the 824x Sandpoint with both UARTs if
desired.
Signed-off-by: Matt McClintock <msm@freescale.com>
Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Diffstat (limited to 'arch/ppc/platforms/sandpoint.c')
| -rw-r--r-- | arch/ppc/platforms/sandpoint.c | 17 |
1 files changed, 10 insertions, 7 deletions
diff --git a/arch/ppc/platforms/sandpoint.c b/arch/ppc/platforms/sandpoint.c index 8b149c2fc54f..21e31346b12b 100644 --- a/arch/ppc/platforms/sandpoint.c +++ b/arch/ppc/platforms/sandpoint.c @@ -311,19 +311,22 @@ sandpoint_setup_arch(void) { bd_t *bp = (bd_t *)__res; struct plat_serial8250_port *pdata; - pdata = (struct plat_serial8250_port *) ppc_sys_get_pdata(MPC10X_DUART); + pdata = (struct plat_serial8250_port *) ppc_sys_get_pdata(MPC10X_UART0); if (pdata) { pdata[0].uartclk = bp->bi_busfreq; - pdata[0].membase = ioremap(pdata[0].mapbase, 0x100); + } - /* this disables the 2nd serial port on the DUART - * since the sandpoint does not have it connected */ - pdata[1].uartclk = 0; - pdata[1].irq = 0; - pdata[1].mapbase = 0; +#ifdef CONFIG_SANDPOINT_ENABLE_UART1 + pdata = (struct plat_serial8250_port *) ppc_sys_get_pdata(MPC10X_UART1); + if (pdata) + { + pdata[0].uartclk = bp->bi_busfreq; } +#else + ppc_sys_device_remove(MPC10X_UART1); +#endif } printk(KERN_INFO "Motorola SPS Sandpoint Test Platform\n"); |