Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

79 files changed, 23351 insertions, 0 deletions

diff --git a/arch/ppc/syslib/Makefile b/arch/ppc/syslib/Makefile
new file mode 100644
index 000000000000..dd418ea3426c
--- /dev/null
+++ b/arch/ppc/syslib/Makefile
@@ -0,0 +1,115 @@
+#
+# Makefile for the linux kernel.
+#
+
+CFLAGS_prom_init.o      += -fPIC
+CFLAGS_btext.o          += -fPIC
+
+wdt-mpc8xx-$(CONFIG_8xx_WDT)	+= m8xx_wdt.o
+
+obj-$(CONFIG_PPCBUG_NVRAM)	+= prep_nvram.o
+obj-$(CONFIG_PPC_OCP)		+= ocp.o
+obj-$(CONFIG_IBM_OCP)		+= ibm_ocp.o
+obj-$(CONFIG_44x)		+= ibm44x_common.o
+obj-$(CONFIG_440GP)		+= ibm440gp_common.o
+obj-$(CONFIG_440GX)		+= ibm440gx_common.o
+obj-$(CONFIG_440SP)		+= ibm440gx_common.o ibm440sp_common.o
+ifeq ($(CONFIG_4xx),y)
+ifeq ($(CONFIG_VIRTEX_II_PRO),y)
+obj-$(CONFIG_40x)		+= xilinx_pic.o
+else
+ifeq ($(CONFIG_403),y)
+obj-$(CONFIG_40x)		+= ppc403_pic.o
+else
+obj-$(CONFIG_40x)		+= ppc4xx_pic.o
+endif
+endif
+obj-$(CONFIG_44x)		+= ppc4xx_pic.o
+obj-$(CONFIG_40x)		+= ppc4xx_setup.o
+obj-$(CONFIG_GEN_RTC)		+= todc_time.o
+obj-$(CONFIG_PPC4xx_DMA)	+= ppc4xx_dma.o
+obj-$(CONFIG_PPC4xx_EDMA)	+= ppc4xx_sgdma.o
+ifeq ($(CONFIG_40x),y)
+obj-$(CONFIG_PCI)		+= indirect_pci.o pci_auto.o ppc405_pci.o
+endif
+endif
+obj-$(CONFIG_8xx)		+= m8xx_setup.o ppc8xx_pic.o $(wdt-mpc8xx-y)
+ifeq ($(CONFIG_8xx),y)
+obj-$(CONFIG_PCI)		+= qspan_pci.o i8259.o
+endif
+obj-$(CONFIG_PPC_OF)		+= prom_init.o prom.o of_device.o
+obj-$(CONFIG_PPC_PMAC)		+= open_pic.o indirect_pci.o
+obj-$(CONFIG_POWER4)		+= open_pic2.o
+obj-$(CONFIG_PPC_CHRP)		+= open_pic.o indirect_pci.o i8259.o
+obj-$(CONFIG_PPC_PREP)		+= open_pic.o indirect_pci.o i8259.o todc_time.o
+obj-$(CONFIG_ADIR)		+= i8259.o indirect_pci.o pci_auto.o \
+					todc_time.o
+obj-$(CONFIG_CPCI690)		+= todc_time.o pci_auto.o
+obj-$(CONFIG_EBONY)		+= indirect_pci.o pci_auto.o todc_time.o
+obj-$(CONFIG_EV64260)		+= todc_time.o pci_auto.o
+obj-$(CONFIG_CHESTNUT)		+= mv64360_pic.o pci_auto.o
+obj-$(CONFIG_GEMINI)		+= open_pic.o indirect_pci.o
+obj-$(CONFIG_GT64260)		+= gt64260_pic.o
+obj-$(CONFIG_K2)		+= i8259.o indirect_pci.o todc_time.o \
+					pci_auto.o
+obj-$(CONFIG_LOPEC)		+= i8259.o pci_auto.o todc_time.o
+obj-$(CONFIG_HDPU)		+= pci_auto.o
+obj-$(CONFIG_LUAN)		+= indirect_pci.o pci_auto.o todc_time.o
+obj-$(CONFIG_KATANA)		+= pci_auto.o
+obj-$(CONFIG_MCPN765)		+= todc_time.o indirect_pci.o pci_auto.o \
+					open_pic.o i8259.o hawk_common.o
+obj-$(CONFIG_MENF1)		+= todc_time.o i8259.o mpc10x_common.o \
+					pci_auto.o indirect_pci.o
+obj-$(CONFIG_MV64360)		+= mv64360_pic.o
+obj-$(CONFIG_MV64X60)		+= mv64x60.o mv64x60_win.o indirect_pci.o
+obj-$(CONFIG_MVME5100)		+= open_pic.o todc_time.o indirect_pci.o \
+					pci_auto.o hawk_common.o
+obj-$(CONFIG_MVME5100_IPMC761_PRESENT)	+= i8259.o
+obj-$(CONFIG_OCOTEA)		+= indirect_pci.o pci_auto.o todc_time.o
+obj-$(CONFIG_PAL4)		+= cpc700_pic.o
+obj-$(CONFIG_PCORE)		+= todc_time.o i8259.o pci_auto.o
+obj-$(CONFIG_POWERPMC250)	+= pci_auto.o
+obj-$(CONFIG_PPLUS)		+= hawk_common.o open_pic.o i8259.o \
+				   indirect_pci.o todc_time.o pci_auto.o
+obj-$(CONFIG_PRPMC750)		+= open_pic.o indirect_pci.o pci_auto.o \
+					hawk_common.o
+obj-$(CONFIG_HARRIER)		+= harrier.o
+obj-$(CONFIG_PRPMC800)		+= open_pic.o indirect_pci.o pci_auto.o
+obj-$(CONFIG_RADSTONE_PPC7D)	+= i8259.o pci_auto.o
+obj-$(CONFIG_SANDPOINT)		+= i8259.o pci_auto.o todc_time.o
+obj-$(CONFIG_SBC82xx)		+= todc_time.o
+obj-$(CONFIG_SPRUCE)		+= cpc700_pic.o indirect_pci.o pci_auto.o \
+				   todc_time.o
+obj-$(CONFIG_8260)		+= m8260_setup.o
+obj-$(CONFIG_PCI_8260)		+= m8260_pci.o indirect_pci.o
+obj-$(CONFIG_8260_PCI9)		+= m8260_pci_erratum9.o
+obj-$(CONFIG_CPM2)		+= cpm2_common.o cpm2_pic.o
+ifeq ($(CONFIG_PPC_GEN550),y)
+obj-$(CONFIG_KGDB)		+= gen550_kgdb.o gen550_dbg.o
+obj-$(CONFIG_SERIAL_TEXT_DEBUG)	+= gen550_dbg.o
+endif
+ifeq ($(CONFIG_SERIAL_MPSC_CONSOLE),y)
+obj-$(CONFIG_SERIAL_TEXT_DEBUG)	+= mv64x60_dbg.o
+endif
+obj-$(CONFIG_BOOTX_TEXT)	+= btext.o
+obj-$(CONFIG_MPC10X_BRIDGE)     += mpc10x_common.o indirect_pci.o
+obj-$(CONFIG_MPC10X_OPENPIC)	+= open_pic.o
+obj-$(CONFIG_40x)		+= dcr.o
+obj-$(CONFIG_BOOKE)		+= dcr.o
+obj-$(CONFIG_85xx)		+= open_pic.o ppc85xx_common.o ppc85xx_setup.o \
+					ppc_sys.o mpc85xx_sys.o \
+					mpc85xx_devices.o
+ifeq ($(CONFIG_85xx),y)
+obj-$(CONFIG_PCI)		+= indirect_pci.o pci_auto.o
+endif
+obj-$(CONFIG_83xx)		+= ipic.o ppc83xx_setup.o ppc_sys.o \
+					mpc83xx_sys.o mpc83xx_devices.o
+ifeq ($(CONFIG_83xx),y)
+obj-$(CONFIG_PCI)		+= indirect_pci.o pci_auto.o
+endif
+obj-$(CONFIG_MPC8555_CDS)	+= todc_time.o
+obj-$(CONFIG_PPC_MPC52xx)	+= mpc52xx_setup.o mpc52xx_pic.o \
+					mpc52xx_sys.o mpc52xx_devices.o ppc_sys.o
+ifeq ($(CONFIG_PPC_MPC52xx),y)
+obj-$(CONFIG_PCI)		+= mpc52xx_pci.o
+endif
diff --git a/arch/ppc/syslib/btext.c b/arch/ppc/syslib/btext.c
new file mode 100644
index 000000000000..7734f6836174
--- /dev/null
+++ b/arch/ppc/syslib/btext.c
@@ -0,0 +1,861 @@
+/*
+ * Procedures for drawing on the screen early on in the boot process.
+ *
+ * Benjamin Herrenschmidt <benh@kernel.crashing.org>
+ */
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/init.h>
+#include <linux/version.h>
+
+#include <asm/sections.h>
+#include <asm/bootx.h>
+#include <asm/btext.h>
+#include <asm/prom.h>
+#include <asm/page.h>
+#include <asm/mmu.h>
+#include <asm/pgtable.h>
+#include <asm/io.h>
+#include <asm/reg.h>
+
+#define NO_SCROLL
+
+#ifndef NO_SCROLL
+static void scrollscreen(void);
+#endif
+
+static void draw_byte(unsigned char c, long locX, long locY);
+static void draw_byte_32(unsigned char *bits, unsigned long *base, int rb);
+static void draw_byte_16(unsigned char *bits, unsigned long *base, int rb);
+static void draw_byte_8(unsigned char *bits, unsigned long *base, int rb);
+
+static int g_loc_X;
+static int g_loc_Y;
+static int g_max_loc_X;
+static int g_max_loc_Y;
+
+unsigned long disp_BAT[2] __initdata = {0, 0};
+
+#define cmapsz	(16*256)
+
+static unsigned char vga_font[cmapsz];
+
+int boot_text_mapped;
+int force_printk_to_btext = 0;
+
+boot_infos_t disp_bi;
+
+extern char *klimit;
+
+/*
+ * Powermac can use btext_* after boot for xmon,
+ * chrp only uses it during early boot.
+ */
+#ifdef CONFIG_XMON
+#define BTEXT	__pmac
+#define BTDATA	__pmacdata
+#else
+#define BTEXT	__init
+#define BTDATA	__initdata
+#endif /* CONFIG_XMON */
+
+/*
+ * This is called only when we are booted via BootX.
+ */
+void __init
+btext_init(boot_infos_t *bi)
+{
+	g_loc_X = 0;
+	g_loc_Y = 0;
+	g_max_loc_X = (bi->dispDeviceRect[2] - bi->dispDeviceRect[0]) / 8;
+	g_max_loc_Y = (bi->dispDeviceRect[3] - bi->dispDeviceRect[1]) / 16;
+	disp_bi = *bi;
+	boot_text_mapped = 1;
+}
+
+void __init
+btext_welcome(void)
+{
+	unsigned long flags;
+	unsigned long pvr;
+	boot_infos_t* bi = &disp_bi;
+
+	btext_drawstring("Welcome to Linux, kernel " UTS_RELEASE "\n");
+	btext_drawstring("\nlinked at        : 0x");
+	btext_drawhex(KERNELBASE);
+	btext_drawstring("\nframe buffer at  : 0x");
+	btext_drawhex((unsigned long)bi->dispDeviceBase);
+	btext_drawstring(" (phys), 0x");
+	btext_drawhex((unsigned long)bi->logicalDisplayBase);
+	btext_drawstring(" (log)");
+	btext_drawstring("\nklimit           : 0x");
+	btext_drawhex((unsigned long)klimit);
+	btext_drawstring("\nMSR              : 0x");
+	__asm__ __volatile__ ("mfmsr %0" : "=r" (flags));
+	btext_drawhex(flags);
+	__asm__ __volatile__ ("mfspr %0, 287" : "=r" (pvr));
+	pvr >>= 16;
+	if (pvr > 1) {
+	    btext_drawstring("\nHID0             : 0x");
+	    __asm__ __volatile__ ("mfspr %0, 1008" : "=r" (flags));
+	    btext_drawhex(flags);
+	}
+	if (pvr == 8 || pvr == 12 || pvr == 0x800c) {
+	    btext_drawstring("\nICTC             : 0x");
+	    __asm__ __volatile__ ("mfspr %0, 1019" : "=r" (flags));
+	    btext_drawhex(flags);
+	}
+	btext_drawstring("\n\n");
+}
+
+/* Calc BAT values for mapping the display and store them
+ * in disp_BAT.  Those values are then used from head.S to map
+ * the display during identify_machine() and MMU_Init()
+ *
+ * The display is mapped to virtual address 0xD0000000, rather
+ * than 1:1, because some some CHRP machines put the frame buffer
+ * in the region starting at 0xC0000000 (KERNELBASE).
+ * This mapping is temporary and will disappear as soon as the
+ * setup done by MMU_Init() is applied.
+ *
+ * For now, we align the BAT and then map 8Mb on 601 and 16Mb
+ * on other PPCs. This may cause trouble if the framebuffer
+ * is really badly aligned, but I didn't encounter this case
+ * yet.
+ */
+void __init
+btext_prepare_BAT(void)
+{
+	boot_infos_t* bi = &disp_bi;
+	unsigned long vaddr = KERNELBASE + 0x10000000;
+	unsigned long addr;
+	unsigned long lowbits;
+
+	addr = (unsigned long)bi->dispDeviceBase;
+	if (!addr) {
+		boot_text_mapped = 0;
+		return;
+	}
+	if (PVR_VER(mfspr(SPRN_PVR)) != 1) {
+		/* 603, 604, G3, G4, ... */
+		lowbits = addr & ~0xFF000000UL;
+		addr &= 0xFF000000UL;
+		disp_BAT[0] = vaddr | (BL_16M<<2) | 2;
+		disp_BAT[1] = addr | (_PAGE_NO_CACHE | _PAGE_GUARDED | BPP_RW);	
+	} else {
+		/* 601 */
+		lowbits = addr & ~0xFF800000UL;
+		addr &= 0xFF800000UL;
+		disp_BAT[0] = vaddr | (_PAGE_NO_CACHE | PP_RWXX) | 4;
+		disp_BAT[1] = addr | BL_8M | 0x40;
+	}
+	bi->logicalDisplayBase = (void *) (vaddr + lowbits);
+}
+
+/* This function will enable the early boot text when doing OF booting. This
+ * way, xmon output should work too
+ */
+void __init
+btext_setup_display(int width, int height, int depth, int pitch,
+		    unsigned long address)
+{
+	boot_infos_t* bi = &disp_bi;
+
+	g_loc_X = 0;
+	g_loc_Y = 0;
+	g_max_loc_X = width / 8;
+	g_max_loc_Y = height / 16;
+	bi->logicalDisplayBase = (unsigned char *)address;
+	bi->dispDeviceBase = (unsigned char *)address;
+	bi->dispDeviceRowBytes = pitch;
+	bi->dispDeviceDepth = depth;
+	bi->dispDeviceRect[0] = bi->dispDeviceRect[1] = 0;
+	bi->dispDeviceRect[2] = width;
+	bi->dispDeviceRect[3] = height;
+	boot_text_mapped = 1;
+}
+
+/* Here's a small text engine to use during early boot
+ * or for debugging purposes
+ *
+ * todo:
+ *
+ *  - build some kind of vgacon with it to enable early printk
+ *  - move to a separate file
+ *  - add a few video driver hooks to keep in sync with display
+ *    changes.
+ */
+
+void __openfirmware
+map_boot_text(void)
+{
+	unsigned long base, offset, size;
+	boot_infos_t *bi = &disp_bi;
+	unsigned char *vbase;
+
+	/* By default, we are no longer mapped */
+	boot_text_mapped = 0;
+	if (bi->dispDeviceBase == 0)
+		return;
+	base = ((unsigned long) bi->dispDeviceBase) & 0xFFFFF000UL;
+	offset = ((unsigned long) bi->dispDeviceBase) - base;
+	size = bi->dispDeviceRowBytes * bi->dispDeviceRect[3] + offset
+		+ bi->dispDeviceRect[0];
+	vbase = ioremap(base, size);
+	if (vbase == 0)
+		return;
+	bi->logicalDisplayBase = vbase + offset;
+	boot_text_mapped = 1;
+}
+
+/* Calc the base address of a given point (x,y) */
+static unsigned char * BTEXT
+calc_base(boot_infos_t *bi, int x, int y)
+{
+	unsigned char *base;
+
+	base = bi->logicalDisplayBase;
+	if (base == 0)
+		base = bi->dispDeviceBase;
+	base += (x + bi->dispDeviceRect[0]) * (bi->dispDeviceDepth >> 3);
+	base += (y + bi->dispDeviceRect[1]) * bi->dispDeviceRowBytes;
+	return base;
+}
+
+/* Adjust the display to a new resolution */
+void
+btext_update_display(unsigned long phys, int width, int height,
+		     int depth, int pitch)
+{
+	boot_infos_t *bi = &disp_bi;
+
+	if (bi->dispDeviceBase == 0)
+		return;
+
+	/* check it's the same frame buffer (within 256MB) */
+	if ((phys ^ (unsigned long)bi->dispDeviceBase) & 0xf0000000)
+		return;
+
+	bi->dispDeviceBase = (__u8 *) phys;
+	bi->dispDeviceRect[0] = 0;
+	bi->dispDeviceRect[1] = 0;
+	bi->dispDeviceRect[2] = width;
+	bi->dispDeviceRect[3] = height;
+	bi->dispDeviceDepth = depth;
+	bi->dispDeviceRowBytes = pitch;
+	if (boot_text_mapped) {
+		iounmap(bi->logicalDisplayBase);
+		boot_text_mapped = 0;
+	}
+	map_boot_text();
+	g_loc_X = 0;
+	g_loc_Y = 0;
+	g_max_loc_X = width / 8;
+	g_max_loc_Y = height / 16;
+}
+
+void BTEXT btext_clearscreen(void)
+{
+	boot_infos_t* bi	= &disp_bi;
+	unsigned long *base	= (unsigned long *)calc_base(bi, 0, 0);
+	unsigned long width 	= ((bi->dispDeviceRect[2] - bi->dispDeviceRect[0]) *
+					(bi->dispDeviceDepth >> 3)) >> 2;
+	int i,j;
+
+	for (i=0; i<(bi->dispDeviceRect[3] - bi->dispDeviceRect[1]); i++)
+	{
+		unsigned long *ptr = base;
+		for(j=width; j; --j)
+			*(ptr++) = 0;
+		base += (bi->dispDeviceRowBytes >> 2);
+	}
+}
+
+__inline__ void dcbst(const void* addr)
+{
+	__asm__ __volatile__ ("dcbst 0,%0" :: "r" (addr));
+}
+
+void BTEXT btext_flushscreen(void)
+{
+	boot_infos_t* bi	= &disp_bi;
+	unsigned long *base	= (unsigned long *)calc_base(bi, 0, 0);
+	unsigned long width 	= ((bi->dispDeviceRect[2] - bi->dispDeviceRect[0]) *
+					(bi->dispDeviceDepth >> 3)) >> 2;
+	int i,j;
+
+	for (i=0; i<(bi->dispDeviceRect[3] - bi->dispDeviceRect[1]); i++)
+	{
+		unsigned long *ptr = base;
+		for(j=width; j>0; j-=8) {
+			dcbst(ptr);
+			ptr += 8;
+		}
+		base += (bi->dispDeviceRowBytes >> 2);
+	}
+}
+
+#ifndef NO_SCROLL
+static BTEXT void
+scrollscreen(void)
+{
+	boot_infos_t* bi		= &disp_bi;
+	unsigned long *src		= (unsigned long *)calc_base(bi,0,16);
+	unsigned long *dst		= (unsigned long *)calc_base(bi,0,0);
+	unsigned long width		= ((bi->dispDeviceRect[2] - bi->dispDeviceRect[0]) *
+						(bi->dispDeviceDepth >> 3)) >> 2;
+	int i,j;
+
+#ifdef CONFIG_ADB_PMU
+	pmu_suspend();	/* PMU will not shut us down ! */
+#endif
+	for (i=0; i<(bi->dispDeviceRect[3] - bi->dispDeviceRect[1] - 16); i++)
+	{
+		unsigned long *src_ptr = src;
+		unsigned long *dst_ptr = dst;
+		for(j=width; j; --j)
+			*(dst_ptr++) = *(src_ptr++);
+		src += (bi->dispDeviceRowBytes >> 2);
+		dst += (bi->dispDeviceRowBytes >> 2);
+	}
+	for (i=0; i<16; i++)
+	{
+		unsigned long *dst_ptr = dst;
+		for(j=width; j; --j)
+			*(dst_ptr++) = 0;
+		dst += (bi->dispDeviceRowBytes >> 2);
+	}
+#ifdef CONFIG_ADB_PMU
+	pmu_resume();	/* PMU will not shut us down ! */
+#endif
+}
+#endif /* ndef NO_SCROLL */
+
+void BTEXT btext_drawchar(char c)
+{
+	int cline = 0, x;
+
+	if (!boot_text_mapped)
+		return;
+
+	switch (c) {
+	case '\b':
+		if (g_loc_X > 0)
+			--g_loc_X;
+		break;
+	case '\t':
+		g_loc_X = (g_loc_X & -8) + 8;
+		break;
+	case '\r':
+		g_loc_X = 0;
+		break;
+	case '\n':
+		g_loc_X = 0;
+		g_loc_Y++;
+		cline = 1;
+		break;
+	default:
+		draw_byte(c, g_loc_X++, g_loc_Y);
+	}
+	if (g_loc_X >= g_max_loc_X) {
+		g_loc_X = 0;
+		g_loc_Y++;
+		cline = 1;
+	}
+#ifndef NO_SCROLL
+	while (g_loc_Y >= g_max_loc_Y) {
+		scrollscreen();
+		g_loc_Y--;
+	}
+#else
+	/* wrap around from bottom to top of screen so we don't
+	   waste time scrolling each line.  -- paulus. */
+	if (g_loc_Y >= g_max_loc_Y)
+		g_loc_Y = 0;
+	if (cline) {
+		for (x = 0; x < g_max_loc_X; ++x)
+			draw_byte(' ', x, g_loc_Y);
+	}
+#endif
+}
+
+void BTEXT
+btext_drawstring(const char *c)
+{
+	if (!boot_text_mapped)
+		return;
+	while (*c)
+		btext_drawchar(*c++);
+}
+
+void BTEXT
+btext_drawhex(unsigned long v)
+{
+	static char hex_table[] = "0123456789abcdef";
+
+	if (!boot_text_mapped)
+		return;
+	btext_drawchar(hex_table[(v >> 28) & 0x0000000FUL]);
+	btext_drawchar(hex_table[(v >> 24) & 0x0000000FUL]);
+	btext_drawchar(hex_table[(v >> 20) & 0x0000000FUL]);
+	btext_drawchar(hex_table[(v >> 16) & 0x0000000FUL]);
+	btext_drawchar(hex_table[(v >> 12) & 0x0000000FUL]);
+	btext_drawchar(hex_table[(v >>  8) & 0x0000000FUL]);
+	btext_drawchar(hex_table[(v >>  4) & 0x0000000FUL]);
+	btext_drawchar(hex_table[(v >>  0) & 0x0000000FUL]);
+	btext_drawchar(' ');
+}
+
+static void BTEXT
+draw_byte(unsigned char c, long locX, long locY)
+{
+	boot_infos_t* bi	= &disp_bi;
+	unsigned char *base	= calc_base(bi, locX << 3, locY << 4);
+	unsigned char *font	= &vga_font[((unsigned long)c) * 16];
+	int rb			= bi->dispDeviceRowBytes;
+
+	switch(bi->dispDeviceDepth) {
+	case 24:
+	case 32:
+		draw_byte_32(font, (unsigned long *)base, rb);
+		break;
+	case 15:
+	case 16:
+		draw_byte_16(font, (unsigned long *)base, rb);
+		break;
+	case 8:
+		draw_byte_8(font, (unsigned long *)base, rb);
+		break;
+	}
+}
+
+static unsigned long expand_bits_8[16] BTDATA = {
+	0x00000000,
+	0x000000ff,
+	0x0000ff00,
+	0x0000ffff,
+	0x00ff0000,
+	0x00ff00ff,
+	0x00ffff00,
+	0x00ffffff,
+	0xff000000,
+	0xff0000ff,
+	0xff00ff00,
+	0xff00ffff,
+	0xffff0000,
+	0xffff00ff,
+	0xffffff00,
+	0xffffffff
+};
+
+static unsigned long expand_bits_16[4] BTDATA = {
+	0x00000000,
+	0x0000ffff,
+	0xffff0000,
+	0xffffffff
+};
+
+
+static void BTEXT
+draw_byte_32(unsigned char *font, unsigned long *base, int rb)
+{
+	int l, bits;
+	int fg = 0xFFFFFFFFUL;
+	int bg = 0x00000000UL;
+
+	for (l = 0; l < 16; ++l)
+	{
+		bits = *font++;
+		base[0] = (-(bits >> 7) & fg) ^ bg;
+		base[1] = (-((bits >> 6) & 1) & fg) ^ bg;
+		base[2] = (-((bits >> 5) & 1) & fg) ^ bg;
+		base[3] = (-((bits >> 4) & 1) & fg) ^ bg;
+		base[4] = (-((bits >> 3) & 1) & fg) ^ bg;
+		base[5] = (-((bits >> 2) & 1) & fg) ^ bg;
+		base[6] = (-((bits >> 1) & 1) & fg) ^ bg;
+		base[7] = (-(bits & 1) & fg) ^ bg;
+		base = (unsigned long *) ((char *)base + rb);
+	}
+}
+
+static void BTEXT
+draw_byte_16(unsigned char *font, unsigned long *base, int rb)
+{
+	int l, bits;
+	int fg = 0xFFFFFFFFUL;
+	int bg = 0x00000000UL;
+	unsigned long *eb = expand_bits_16;
+
+	for (l = 0; l < 16; ++l)
+	{
+		bits = *font++;
+		base[0] = (eb[bits >> 6] & fg) ^ bg;
+		base[1] = (eb[(bits >> 4) & 3] & fg) ^ bg;
+		base[2] = (eb[(bits >> 2) & 3] & fg) ^ bg;
+		base[3] = (eb[bits & 3] & fg) ^ bg;
+		base = (unsigned long *) ((char *)base + rb);
+	}
+}
+
+static void BTEXT
+draw_byte_8(unsigned char *font, unsigned long *base, int rb)
+{
+	int l, bits;
+	int fg = 0x0F0F0F0FUL;
+	int bg = 0x00000000UL;
+	unsigned long *eb = expand_bits_8;
+
+	for (l = 0; l < 16; ++l)
+	{
+		bits = *font++;
+		base[0] = (eb[bits >> 4] & fg) ^ bg;
+		base[1] = (eb[bits & 0xf] & fg) ^ bg;
+		base = (unsigned long *) ((char *)base + rb);
+	}
+}
+
+static unsigned char vga_font[cmapsz] BTDATA = {
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7e, 0x81, 0xa5, 0x81, 0x81, 0xbd,
+0x99, 0x81, 0x81, 0x7e, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7e, 0xff,
+0xdb, 0xff, 0xff, 0xc3, 0xe7, 0xff, 0xff, 0x7e, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x6c, 0xfe, 0xfe, 0xfe, 0xfe, 0x7c, 0x38, 0x10,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x38, 0x7c, 0xfe,
+0x7c, 0x38, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18,
+0x3c, 0x3c, 0xe7, 0xe7, 0xe7, 0x18, 0x18, 0x3c, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x18, 0x3c, 0x7e, 0xff, 0xff, 0x7e, 0x18, 0x18, 0x3c,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x3c,
+0x3c, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff,
+0xff, 0xff, 0xe7, 0xc3, 0xc3, 0xe7, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x3c, 0x66, 0x42, 0x42, 0x66, 0x3c, 0x00,
+0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xc3, 0x99, 0xbd,
+0xbd, 0x99, 0xc3, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x1e, 0x0e,
+0x1a, 0x32, 0x78, 0xcc, 0xcc, 0xcc, 0xcc, 0x78, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x3c, 0x66, 0x66, 0x66, 0x66, 0x3c, 0x18, 0x7e, 0x18, 0x18,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3f, 0x33, 0x3f, 0x30, 0x30, 0x30,
+0x30, 0x70, 0xf0, 0xe0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7f, 0x63,
+0x7f, 0x63, 0x63, 0x63, 0x63, 0x67, 0xe7, 0xe6, 0xc0, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x18, 0x18, 0xdb, 0x3c, 0xe7, 0x3c, 0xdb, 0x18, 0x18,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xc0, 0xe0, 0xf0, 0xf8, 0xfe, 0xf8,
+0xf0, 0xe0, 0xc0, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x06, 0x0e,
+0x1e, 0x3e, 0xfe, 0x3e, 0x1e, 0x0e, 0x06, 0x02, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x18, 0x3c, 0x7e, 0x18, 0x18, 0x18, 0x7e, 0x3c, 0x18, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x66, 0x66, 0x66, 0x66, 0x66, 0x66,
+0x66, 0x00, 0x66, 0x66, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7f, 0xdb,
+0xdb, 0xdb, 0x7b, 0x1b, 0x1b, 0x1b, 0x1b, 0x1b, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x7c, 0xc6, 0x60, 0x38, 0x6c, 0xc6, 0xc6, 0x6c, 0x38, 0x0c, 0xc6,
+0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0xfe, 0xfe, 0xfe, 0xfe, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x3c,
+0x7e, 0x18, 0x18, 0x18, 0x7e, 0x3c, 0x18, 0x7e, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x18, 0x3c, 0x7e, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
+0x18, 0x7e, 0x3c, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x18, 0x0c, 0xfe, 0x0c, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x60, 0xfe, 0x60, 0x30, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc0, 0xc0,
+0xc0, 0xfe, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x24, 0x66, 0xff, 0x66, 0x24, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x10, 0x38, 0x38, 0x7c, 0x7c, 0xfe, 0xfe, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0xfe, 0x7c, 0x7c,
+0x38, 0x38, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x18, 0x3c, 0x3c, 0x3c, 0x18, 0x18, 0x18, 0x00, 0x18, 0x18,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x66, 0x66, 0x66, 0x24, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x6c,
+0x6c, 0xfe, 0x6c, 0x6c, 0x6c, 0xfe, 0x6c, 0x6c, 0x00, 0x00, 0x00, 0x00,
+0x18, 0x18, 0x7c, 0xc6, 0xc2, 0xc0, 0x7c, 0x06, 0x06, 0x86, 0xc6, 0x7c,
+0x18, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc2, 0xc6, 0x0c, 0x18,
+0x30, 0x60, 0xc6, 0x86, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x6c,
+0x6c, 0x38, 0x76, 0xdc, 0xcc, 0xcc, 0xcc, 0x76, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x30, 0x30, 0x30, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0c, 0x18, 0x30, 0x30, 0x30, 0x30,
+0x30, 0x30, 0x18, 0x0c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x18,
+0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x18, 0x30, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x66, 0x3c, 0xff, 0x3c, 0x66, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x7e,
+0x18, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x18, 0x30, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7e, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x18, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x02, 0x06, 0x0c, 0x18, 0x30, 0x60, 0xc0, 0x80, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x7c, 0xc6, 0xc6, 0xce, 0xde, 0xf6, 0xe6, 0xc6, 0xc6, 0x7c,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x38, 0x78, 0x18, 0x18, 0x18,
+0x18, 0x18, 0x18, 0x7e, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7c, 0xc6,
+0x06, 0x0c, 0x18, 0x30, 0x60, 0xc0, 0xc6, 0xfe, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x7c, 0xc6, 0x06, 0x06, 0x3c, 0x06, 0x06, 0x06, 0xc6, 0x7c,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0c, 0x1c, 0x3c, 0x6c, 0xcc, 0xfe,
+0x0c, 0x0c, 0x0c, 0x1e, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0xc0,
+0xc0, 0xc0, 0xfc, 0x06, 0x06, 0x06, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x38, 0x60, 0xc0, 0xc0, 0xfc, 0xc6, 0xc6, 0xc6, 0xc6, 0x7c,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0xc6, 0x06, 0x06, 0x0c, 0x18,
+0x30, 0x30, 0x30, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7c, 0xc6,
+0xc6, 0xc6, 0x7c, 0xc6, 0xc6, 0xc6, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x7c, 0xc6, 0xc6, 0xc6, 0x7e, 0x06, 0x06, 0x06, 0x0c, 0x78,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x00, 0x00,
+0x00, 0x18, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x18, 0x18, 0x00, 0x00, 0x00, 0x18, 0x18, 0x30, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x06, 0x0c, 0x18, 0x30, 0x60, 0x30, 0x18, 0x0c, 0x06,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7e, 0x00, 0x00,
+0x7e, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x60,
+0x30, 0x18, 0x0c, 0x06, 0x0c, 0x18, 0x30, 0x60, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x7c, 0xc6, 0xc6, 0x0c, 0x18, 0x18, 0x18, 0x00, 0x18, 0x18,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7c, 0xc6, 0xc6, 0xc6, 0xde, 0xde,
+0xde, 0xdc, 0xc0, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x38,
+0x6c, 0xc6, 0xc6, 0xfe, 0xc6, 0xc6, 0xc6, 0xc6, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0xfc, 0x66, 0x66, 0x66, 0x7c, 0x66, 0x66, 0x66, 0x66, 0xfc,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3c, 0x66, 0xc2, 0xc0, 0xc0, 0xc0,
+0xc0, 0xc2, 0x66, 0x3c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0x6c,
+0x66, 0x66, 0x66, 0x66, 0x66, 0x66, 0x6c, 0xf8, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0xfe, 0x66, 0x62, 0x68, 0x78, 0x68, 0x60, 0x62, 0x66, 0xfe,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0x66, 0x62, 0x68, 0x78, 0x68,
+0x60, 0x60, 0x60, 0xf0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3c, 0x66,
+0xc2, 0xc0, 0xc0, 0xde, 0xc6, 0xc6, 0x66, 0x3a, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0xc6, 0xc6, 0xc6, 0xc6, 0xfe, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3c, 0x18, 0x18, 0x18, 0x18, 0x18,
+0x18, 0x18, 0x18, 0x3c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1e, 0x0c,
+0x0c, 0x0c, 0x0c, 0x0c, 0xcc, 0xcc, 0xcc, 0x78, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0xe6, 0x66, 0x66, 0x6c, 0x78, 0x78, 0x6c, 0x66, 0x66, 0xe6,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0, 0x60, 0x60, 0x60, 0x60, 0x60,
+0x60, 0x62, 0x66, 0xfe, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc3, 0xe7,
+0xff, 0xff, 0xdb, 0xc3, 0xc3, 0xc3, 0xc3, 0xc3, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0xc6, 0xe6, 0xf6, 0xfe, 0xde, 0xce, 0xc6, 0xc6, 0xc6, 0xc6,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7c, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6,
+0xc6, 0xc6, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc, 0x66,
+0x66, 0x66, 0x7c, 0x60, 0x60, 0x60, 0x60, 0xf0, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x7c, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xd6, 0xde, 0x7c,
+0x0c, 0x0e, 0x00, 0x00, 0x00, 0x00, 0xfc, 0x66, 0x66, 0x66, 0x7c, 0x6c,
+0x66, 0x66, 0x66, 0xe6, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7c, 0xc6,
+0xc6, 0x60, 0x38, 0x0c, 0x06, 0xc6, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0xff, 0xdb, 0x99, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x3c,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6,
+0xc6, 0xc6, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc3, 0xc3,
+0xc3, 0xc3, 0xc3, 0xc3, 0xc3, 0x66, 0x3c, 0x18, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0xc3, 0xc3, 0xc3, 0xc3, 0xc3, 0xdb, 0xdb, 0xff, 0x66, 0x66,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc3, 0xc3, 0x66, 0x3c, 0x18, 0x18,
+0x3c, 0x66, 0xc3, 0xc3, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc3, 0xc3,
+0xc3, 0x66, 0x3c, 0x18, 0x18, 0x18, 0x18, 0x3c, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0xff, 0xc3, 0x86, 0x0c, 0x18, 0x30, 0x60, 0xc1, 0xc3, 0xff,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3c, 0x30, 0x30, 0x30, 0x30, 0x30,
+0x30, 0x30, 0x30, 0x3c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80,
+0xc0, 0xe0, 0x70, 0x38, 0x1c, 0x0e, 0x06, 0x02, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x3c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x3c,
+0x00, 0x00, 0x00, 0x00, 0x10, 0x38, 0x6c, 0xc6, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0x00, 0x00,
+0x30, 0x30, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x0c, 0x7c,
+0xcc, 0xcc, 0xcc, 0x76, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe0, 0x60,
+0x60, 0x78, 0x6c, 0x66, 0x66, 0x66, 0x66, 0x7c, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x7c, 0xc6, 0xc0, 0xc0, 0xc0, 0xc6, 0x7c,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1c, 0x0c, 0x0c, 0x3c, 0x6c, 0xcc,
+0xcc, 0xcc, 0xcc, 0x76, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x7c, 0xc6, 0xfe, 0xc0, 0xc0, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x38, 0x6c, 0x64, 0x60, 0xf0, 0x60, 0x60, 0x60, 0x60, 0xf0,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x76, 0xcc, 0xcc,
+0xcc, 0xcc, 0xcc, 0x7c, 0x0c, 0xcc, 0x78, 0x00, 0x00, 0x00, 0xe0, 0x60,
+0x60, 0x6c, 0x76, 0x66, 0x66, 0x66, 0x66, 0xe6, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x18, 0x18, 0x00, 0x38, 0x18, 0x18, 0x18, 0x18, 0x18, 0x3c,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x06, 0x06, 0x00, 0x0e, 0x06, 0x06,
+0x06, 0x06, 0x06, 0x06, 0x66, 0x66, 0x3c, 0x00, 0x00, 0x00, 0xe0, 0x60,
+0x60, 0x66, 0x6c, 0x78, 0x78, 0x6c, 0x66, 0xe6, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x38, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x3c,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe6, 0xff, 0xdb,
+0xdb, 0xdb, 0xdb, 0xdb, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0xdc, 0x66, 0x66, 0x66, 0x66, 0x66, 0x66, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x7c, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0x7c,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xdc, 0x66, 0x66,
+0x66, 0x66, 0x66, 0x7c, 0x60, 0x60, 0xf0, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x76, 0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0x7c, 0x0c, 0x0c, 0x1e, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0xdc, 0x76, 0x66, 0x60, 0x60, 0x60, 0xf0,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7c, 0xc6, 0x60,
+0x38, 0x0c, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x30,
+0x30, 0xfc, 0x30, 0x30, 0x30, 0x30, 0x36, 0x1c, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0x76,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc3, 0xc3, 0xc3,
+0xc3, 0x66, 0x3c, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0xc3, 0xc3, 0xc3, 0xdb, 0xdb, 0xff, 0x66, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0xc3, 0x66, 0x3c, 0x18, 0x3c, 0x66, 0xc3,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc6, 0xc6, 0xc6,
+0xc6, 0xc6, 0xc6, 0x7e, 0x06, 0x0c, 0xf8, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0xfe, 0xcc, 0x18, 0x30, 0x60, 0xc6, 0xfe, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x0e, 0x18, 0x18, 0x18, 0x70, 0x18, 0x18, 0x18, 0x18, 0x0e,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x18, 0x18, 0x00, 0x18,
+0x18, 0x18, 0x18, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x18,
+0x18, 0x18, 0x0e, 0x18, 0x18, 0x18, 0x18, 0x70, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x76, 0xdc, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x38, 0x6c, 0xc6,
+0xc6, 0xc6, 0xfe, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3c, 0x66,
+0xc2, 0xc0, 0xc0, 0xc0, 0xc2, 0x66, 0x3c, 0x0c, 0x06, 0x7c, 0x00, 0x00,
+0x00, 0x00, 0xcc, 0x00, 0x00, 0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0x76,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x0c, 0x18, 0x30, 0x00, 0x7c, 0xc6, 0xfe,
+0xc0, 0xc0, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x38, 0x6c,
+0x00, 0x78, 0x0c, 0x7c, 0xcc, 0xcc, 0xcc, 0x76, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0xcc, 0x00, 0x00, 0x78, 0x0c, 0x7c, 0xcc, 0xcc, 0xcc, 0x76,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x60, 0x30, 0x18, 0x00, 0x78, 0x0c, 0x7c,
+0xcc, 0xcc, 0xcc, 0x76, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x6c, 0x38,
+0x00, 0x78, 0x0c, 0x7c, 0xcc, 0xcc, 0xcc, 0x76, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x3c, 0x66, 0x60, 0x60, 0x66, 0x3c, 0x0c, 0x06,
+0x3c, 0x00, 0x00, 0x00, 0x00, 0x10, 0x38, 0x6c, 0x00, 0x7c, 0xc6, 0xfe,
+0xc0, 0xc0, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc6, 0x00,
+0x00, 0x7c, 0xc6, 0xfe, 0xc0, 0xc0, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x60, 0x30, 0x18, 0x00, 0x7c, 0xc6, 0xfe, 0xc0, 0xc0, 0xc6, 0x7c,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x66, 0x00, 0x00, 0x38, 0x18, 0x18,
+0x18, 0x18, 0x18, 0x3c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x3c, 0x66,
+0x00, 0x38, 0x18, 0x18, 0x18, 0x18, 0x18, 0x3c, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x60, 0x30, 0x18, 0x00, 0x38, 0x18, 0x18, 0x18, 0x18, 0x18, 0x3c,
+0x00, 0x00, 0x00, 0x00, 0x00, 0xc6, 0x00, 0x10, 0x38, 0x6c, 0xc6, 0xc6,
+0xfe, 0xc6, 0xc6, 0xc6, 0x00, 0x00, 0x00, 0x00, 0x38, 0x6c, 0x38, 0x00,
+0x38, 0x6c, 0xc6, 0xc6, 0xfe, 0xc6, 0xc6, 0xc6, 0x00, 0x00, 0x00, 0x00,
+0x18, 0x30, 0x60, 0x00, 0xfe, 0x66, 0x60, 0x7c, 0x60, 0x60, 0x66, 0xfe,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x6e, 0x3b, 0x1b,
+0x7e, 0xd8, 0xdc, 0x77, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3e, 0x6c,
+0xcc, 0xcc, 0xfe, 0xcc, 0xcc, 0xcc, 0xcc, 0xce, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x10, 0x38, 0x6c, 0x00, 0x7c, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0x7c,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc6, 0x00, 0x00, 0x7c, 0xc6, 0xc6,
+0xc6, 0xc6, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x60, 0x30, 0x18,
+0x00, 0x7c, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x30, 0x78, 0xcc, 0x00, 0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0x76,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x60, 0x30, 0x18, 0x00, 0xcc, 0xcc, 0xcc,
+0xcc, 0xcc, 0xcc, 0x76, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc6, 0x00,
+0x00, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0x7e, 0x06, 0x0c, 0x78, 0x00,
+0x00, 0xc6, 0x00, 0x7c, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0x7c,
+0x00, 0x00, 0x00, 0x00, 0x00, 0xc6, 0x00, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6,
+0xc6, 0xc6, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x7e,
+0xc3, 0xc0, 0xc0, 0xc0, 0xc3, 0x7e, 0x18, 0x18, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x38, 0x6c, 0x64, 0x60, 0xf0, 0x60, 0x60, 0x60, 0x60, 0xe6, 0xfc,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc3, 0x66, 0x3c, 0x18, 0xff, 0x18,
+0xff, 0x18, 0x18, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc, 0x66, 0x66,
+0x7c, 0x62, 0x66, 0x6f, 0x66, 0x66, 0x66, 0xf3, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x0e, 0x1b, 0x18, 0x18, 0x18, 0x7e, 0x18, 0x18, 0x18, 0x18, 0x18,
+0xd8, 0x70, 0x00, 0x00, 0x00, 0x18, 0x30, 0x60, 0x00, 0x78, 0x0c, 0x7c,
+0xcc, 0xcc, 0xcc, 0x76, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0c, 0x18, 0x30,
+0x00, 0x38, 0x18, 0x18, 0x18, 0x18, 0x18, 0x3c, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x18, 0x30, 0x60, 0x00, 0x7c, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0x7c,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x30, 0x60, 0x00, 0xcc, 0xcc, 0xcc,
+0xcc, 0xcc, 0xcc, 0x76, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x76, 0xdc,
+0x00, 0xdc, 0x66, 0x66, 0x66, 0x66, 0x66, 0x66, 0x00, 0x00, 0x00, 0x00,
+0x76, 0xdc, 0x00, 0xc6, 0xe6, 0xf6, 0xfe, 0xde, 0xce, 0xc6, 0xc6, 0xc6,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x3c, 0x6c, 0x6c, 0x3e, 0x00, 0x7e, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x6c, 0x6c,
+0x38, 0x00, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x30, 0x30, 0x00, 0x30, 0x30, 0x60, 0xc0, 0xc6, 0xc6, 0x7c,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0xc0,
+0xc0, 0xc0, 0xc0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0xfe, 0x06, 0x06, 0x06, 0x06, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0xc0, 0xc0, 0xc2, 0xc6, 0xcc, 0x18, 0x30, 0x60, 0xce, 0x9b, 0x06,
+0x0c, 0x1f, 0x00, 0x00, 0x00, 0xc0, 0xc0, 0xc2, 0xc6, 0xcc, 0x18, 0x30,
+0x66, 0xce, 0x96, 0x3e, 0x06, 0x06, 0x00, 0x00, 0x00, 0x00, 0x18, 0x18,
+0x00, 0x18, 0x18, 0x18, 0x3c, 0x3c, 0x3c, 0x18, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x36, 0x6c, 0xd8, 0x6c, 0x36, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xd8, 0x6c, 0x36,
+0x6c, 0xd8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x11, 0x44, 0x11, 0x44,
+0x11, 0x44, 0x11, 0x44, 0x11, 0x44, 0x11, 0x44, 0x11, 0x44, 0x11, 0x44,
+0x55, 0xaa, 0x55, 0xaa, 0x55, 0xaa, 0x55, 0xaa, 0x55, 0xaa, 0x55, 0xaa,
+0x55, 0xaa, 0x55, 0xaa, 0xdd, 0x77, 0xdd, 0x77, 0xdd, 0x77, 0xdd, 0x77,
+0xdd, 0x77, 0xdd, 0x77, 0xdd, 0x77, 0xdd, 0x77, 0x18, 0x18, 0x18, 0x18,
+0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
+0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0xf8, 0x18, 0x18, 0x18, 0x18,
+0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0xf8, 0x18, 0xf8,
+0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x36, 0x36, 0x36, 0x36,
+0x36, 0x36, 0x36, 0xf6, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0x36, 0x36, 0x36, 0x36,
+0x36, 0x36, 0x36, 0x36, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0x18, 0xf8,
+0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x36, 0x36, 0x36, 0x36,
+0x36, 0xf6, 0x06, 0xf6, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36,
+0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36,
+0x36, 0x36, 0x36, 0x36, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0x06, 0xf6,
+0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36,
+0x36, 0xf6, 0x06, 0xfe, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0xfe, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x18, 0x18, 0x18, 0xf8, 0x18, 0xf8,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0xf8, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
+0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x1f, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0xff,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0xff, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
+0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x1f, 0x18, 0x18, 0x18, 0x18,
+0x18, 0x18, 0x18, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x18, 0x18,
+0x18, 0x18, 0x18, 0xff, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
+0x18, 0x18, 0x18, 0x18, 0x18, 0x1f, 0x18, 0x1f, 0x18, 0x18, 0x18, 0x18,
+0x18, 0x18, 0x18, 0x18, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x37,
+0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36,
+0x36, 0x37, 0x30, 0x3f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x3f, 0x30, 0x37, 0x36, 0x36, 0x36, 0x36,
+0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0xf7, 0x00, 0xff,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0xff, 0x00, 0xf7, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36,
+0x36, 0x36, 0x36, 0x36, 0x36, 0x37, 0x30, 0x37, 0x36, 0x36, 0x36, 0x36,
+0x36, 0x36, 0x36, 0x36, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0x00, 0xff,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x36, 0x36, 0x36, 0x36,
+0x36, 0xf7, 0x00, 0xf7, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36,
+0x18, 0x18, 0x18, 0x18, 0x18, 0xff, 0x00, 0xff, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0xff,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0xff, 0x00, 0xff, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0x36, 0x36, 0x36, 0x36,
+0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x3f,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x18, 0x18,
+0x18, 0x1f, 0x18, 0x1f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x1f, 0x18, 0x1f, 0x18, 0x18, 0x18, 0x18,
+0x18, 0x18, 0x18, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3f,
+0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36,
+0x36, 0x36, 0x36, 0xff, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36,
+0x18, 0x18, 0x18, 0x18, 0x18, 0xff, 0x18, 0xff, 0x18, 0x18, 0x18, 0x18,
+0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0xf8,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x1f, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
+0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff,
+0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xf0, 0xf0, 0xf0, 0xf0,
+0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0,
+0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f,
+0x0f, 0x0f, 0x0f, 0x0f, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x76, 0xdc, 0xd8, 0xd8, 0xd8, 0xdc, 0x76, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x78, 0xcc, 0xcc, 0xcc, 0xd8, 0xcc, 0xc6, 0xc6, 0xc6, 0xcc,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0xc6, 0xc6, 0xc0, 0xc0, 0xc0,
+0xc0, 0xc0, 0xc0, 0xc0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0xfe, 0x6c, 0x6c, 0x6c, 0x6c, 0x6c, 0x6c, 0x6c, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0xfe, 0xc6, 0x60, 0x30, 0x18, 0x30, 0x60, 0xc6, 0xfe,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7e, 0xd8, 0xd8,
+0xd8, 0xd8, 0xd8, 0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x66, 0x66, 0x66, 0x66, 0x66, 0x7c, 0x60, 0x60, 0xc0, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x76, 0xdc, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7e, 0x18, 0x3c, 0x66, 0x66,
+0x66, 0x3c, 0x18, 0x7e, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38,
+0x6c, 0xc6, 0xc6, 0xfe, 0xc6, 0xc6, 0x6c, 0x38, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x38, 0x6c, 0xc6, 0xc6, 0xc6, 0x6c, 0x6c, 0x6c, 0x6c, 0xee,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1e, 0x30, 0x18, 0x0c, 0x3e, 0x66,
+0x66, 0x66, 0x66, 0x3c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x7e, 0xdb, 0xdb, 0xdb, 0x7e, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x03, 0x06, 0x7e, 0xdb, 0xdb, 0xf3, 0x7e, 0x60, 0xc0,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1c, 0x30, 0x60, 0x60, 0x7c, 0x60,
+0x60, 0x60, 0x30, 0x1c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7c,
+0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0xfe, 0x00, 0x00, 0xfe, 0x00, 0x00, 0xfe, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x7e, 0x18,
+0x18, 0x00, 0x00, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30,
+0x18, 0x0c, 0x06, 0x0c, 0x18, 0x30, 0x00, 0x7e, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x0c, 0x18, 0x30, 0x60, 0x30, 0x18, 0x0c, 0x00, 0x7e,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0e, 0x1b, 0x1b, 0x1b, 0x18, 0x18,
+0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
+0x18, 0x18, 0x18, 0x18, 0xd8, 0xd8, 0xd8, 0x70, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x00, 0x7e, 0x00, 0x18, 0x18, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x76, 0xdc, 0x00,
+0x76, 0xdc, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x6c, 0x6c,
+0x38, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0f, 0x0c, 0x0c,
+0x0c, 0x0c, 0x0c, 0xec, 0x6c, 0x6c, 0x3c, 0x1c, 0x00, 0x00, 0x00, 0x00,
+0x00, 0xd8, 0x6c, 0x6c, 0x6c, 0x6c, 0x6c, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0xd8, 0x30, 0x60, 0xc8, 0xf8, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x7c, 0x7c, 0x7c, 0x7c, 0x7c, 0x7c, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00,
+};
diff --git a/arch/ppc/syslib/cpc700.h b/arch/ppc/syslib/cpc700.h
new file mode 100644
index 000000000000..f2c002531019
--- /dev/null
+++ b/arch/ppc/syslib/cpc700.h
@@ -0,0 +1,98 @@
+/*
+ * arch/ppc/syslib/cpc700.h
+ *
+ * Header file for IBM CPC700 Host Bridge, et. al.
+ *
+ * Author: Mark A. Greer
+ *         mgreer@mvista.com
+ *
+ * 2000-2002 (c) MontaVista, Software, Inc.  This file is licensed under
+ * the terms of the GNU General Public License version 2.  This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+/*
+ * This file contains the defines and macros for the IBM CPC700 host bridge,
+ * memory controller, PIC, UARTs, IIC, and Timers.
+ */
+
+#ifndef	__PPC_SYSLIB_CPC700_H__
+#define	__PPC_SYSLIB_CPC700_H__
+
+#include <linux/stddef.h>
+#include <linux/types.h>
+#include <linux/init.h>
+
+/* XXX no barriers? not even any volatiles?  -- paulus */
+#define CPC700_OUT_32(a,d)  (*(u_int *)a = d)
+#define CPC700_IN_32(a)     (*(u_int *)a)
+
+/*
+ * PCI Section
+ */
+#define CPC700_PCI_CONFIG_ADDR          0xfec00000
+#define CPC700_PCI_CONFIG_DATA          0xfec00004
+
+/* CPU -> PCI memory window 0 */
+#define CPC700_PMM0_LOCAL		0xff400000	/* CPU physical addr */
+#define CPC700_PMM0_MASK_ATTR		0xff400004	/* size and attrs */
+#define CPC700_PMM0_PCI_LOW		0xff400008	/* PCI addr, low word */
+#define CPC700_PMM0_PCI_HIGH		0xff40000c	/* PCI addr, high wd */
+/* CPU -> PCI memory window 1 */
+#define CPC700_PMM1_LOCAL		0xff400010
+#define CPC700_PMM1_MASK_ATTR		0xff400014
+#define CPC700_PMM1_PCI_LOW		0xff400018
+#define CPC700_PMM1_PCI_HIGH		0xff40001c
+/* CPU -> PCI memory window 2 */
+#define CPC700_PMM2_LOCAL		0xff400020
+#define CPC700_PMM2_MASK_ATTR		0xff400024
+#define CPC700_PMM2_PCI_LOW		0xff400028
+#define CPC700_PMM2_PCI_HIGH		0xff40002c
+/* PCI memory -> CPU window 1 */
+#define CPC700_PTM1_MEMSIZE		0xff400030	/* window size */
+#define CPC700_PTM1_LOCAL		0xff400034	/* CPU phys addr */
+/* PCI memory -> CPU window 2 */
+#define CPC700_PTM2_MEMSIZE		0xff400038	/* size and enable */
+#define CPC700_PTM2_LOCAL		0xff40003c
+
+/*
+ * PIC Section
+ *
+ * IBM calls the CPC700's programmable interrupt controller the Universal
+ * Interrupt Controller or UIC.
+ */
+
+/*
+ * UIC Register Addresses.
+ */
+#define	CPC700_UIC_UICSR		0xff500880	/* Status Reg (Rd/Clr)*/
+#define	CPC700_UIC_UICSRS		0xff500884	/* Status Reg (Set) */
+#define	CPC700_UIC_UICER		0xff500888	/* Enable Reg */
+#define	CPC700_UIC_UICCR		0xff50088c	/* Critical Reg */
+#define	CPC700_UIC_UICPR		0xff500890	/* Polarity Reg */
+#define	CPC700_UIC_UICTR		0xff500894	/* Trigger Reg */
+#define	CPC700_UIC_UICMSR		0xff500898	/* Masked Status Reg */
+#define	CPC700_UIC_UICVR		0xff50089c	/* Vector Reg */
+#define	CPC700_UIC_UICVCR		0xff5008a0	/* Vector Config Reg */
+
+#define	CPC700_UIC_UICER_ENABLE		0x00000001	/* Enable an IRQ */
+
+#define	CPC700_UIC_UICVCR_31_HI		0x00000000	/* IRQ 31 hi priority */
+#define	CPC700_UIC_UICVCR_0_HI		0x00000001	/* IRQ 0 hi priority */
+#define CPC700_UIC_UICVCR_BASE_MASK	0xfffffffc
+#define CPC700_UIC_UICVCR_ORDER_MASK	0x00000001
+
+/* Specify value of a bit for an IRQ. */
+#define	CPC700_UIC_IRQ_BIT(i)		((0x00000001) << (31 - (i)))
+
+/*
+ * UIC Exports...
+ */
+extern struct hw_interrupt_type cpc700_pic;
+extern unsigned int cpc700_irq_assigns[32][2];
+
+extern void __init cpc700_init_IRQ(void);
+extern int cpc700_get_irq(struct pt_regs *);
+
+#endif	/* __PPC_SYSLIB_CPC700_H__ */
diff --git a/arch/ppc/syslib/cpc700_pic.c b/arch/ppc/syslib/cpc700_pic.c
new file mode 100644
index 000000000000..774709807538
--- /dev/null
+++ b/arch/ppc/syslib/cpc700_pic.c
@@ -0,0 +1,187 @@
+/*
+ * arch/ppc/syslib/cpc700_pic.c
+ *
+ * Interrupt controller support for IBM Spruce
+ *
+ * Authors: Mark Greer, Matt Porter, and Johnnie Peters
+ *	    mgreer@mvista.com
+ *          mporter@mvista.com
+ *          jpeters@mvista.com
+ *
+ * 2001-2002 (c) MontaVista, Software, Inc.  This file is licensed under
+ * the terms of the GNU General Public License version 2.  This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#include <linux/stddef.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/signal.h>
+#include <linux/irq.h>
+
+#include <asm/io.h>
+#include <asm/system.h>
+#include <asm/irq.h>
+
+#include "cpc700.h"
+
+static void
+cpc700_unmask_irq(unsigned int irq)
+{
+	unsigned int tr_bits;
+
+	/*
+	 * IRQ 31 is largest IRQ supported.
+	 * IRQs 17-19 are reserved.
+	 */
+	if ((irq <= 31) && ((irq < 17) || (irq > 19))) {
+		tr_bits = CPC700_IN_32(CPC700_UIC_UICTR);
+
+		if ((tr_bits & (1 << (31 - irq))) == 0) {
+			/* level trigger interrupt, clear bit in status
+			 * register */
+			CPC700_OUT_32(CPC700_UIC_UICSR, 1 << (31 - irq));
+		}
+
+		/* Know IRQ fits in entry 0 of ppc_cached_irq_mask[] */
+		ppc_cached_irq_mask[0] |= CPC700_UIC_IRQ_BIT(irq);
+	
+		CPC700_OUT_32(CPC700_UIC_UICER, ppc_cached_irq_mask[0]);
+	}
+	return;
+}
+
+static void
+cpc700_mask_irq(unsigned int irq)
+{
+	/*
+	 * IRQ 31 is largest IRQ supported.
+	 * IRQs 17-19 are reserved.
+	 */
+	if ((irq <= 31) && ((irq < 17) || (irq > 19))) {
+		/* Know IRQ fits in entry 0 of ppc_cached_irq_mask[] */
+		ppc_cached_irq_mask[0] &=
+			~CPC700_UIC_IRQ_BIT(irq);
+
+		CPC700_OUT_32(CPC700_UIC_UICER, ppc_cached_irq_mask[0]);
+	}
+	return;
+}
+
+static void
+cpc700_mask_and_ack_irq(unsigned int irq)
+{
+	u_int	bit;
+
+	/*
+	 * IRQ 31 is largest IRQ supported.
+	 * IRQs 17-19 are reserved.
+	 */
+	if ((irq <= 31) && ((irq < 17) || (irq > 19))) {
+		/* Know IRQ fits in entry 0 of ppc_cached_irq_mask[] */
+		bit = CPC700_UIC_IRQ_BIT(irq);
+
+		ppc_cached_irq_mask[0] &= ~bit;
+		CPC700_OUT_32(CPC700_UIC_UICER, ppc_cached_irq_mask[0]);
+		CPC700_OUT_32(CPC700_UIC_UICSR, bit); /* Write 1 clears IRQ */
+	}
+	return;
+}
+
+static struct hw_interrupt_type cpc700_pic = {
+	"CPC700 PIC",
+	NULL,
+	NULL,
+	cpc700_unmask_irq,
+	cpc700_mask_irq,
+	cpc700_mask_and_ack_irq,
+	NULL,
+	NULL
+};
+
+__init static void
+cpc700_pic_init_irq(unsigned int irq)
+{
+	unsigned int tmp;
+
+	/* Set interrupt sense */
+	tmp = CPC700_IN_32(CPC700_UIC_UICTR);
+	if (cpc700_irq_assigns[irq][0] == 0) {
+		tmp &= ~CPC700_UIC_IRQ_BIT(irq);
+	} else {
+		tmp |= CPC700_UIC_IRQ_BIT(irq);
+	}
+	CPC700_OUT_32(CPC700_UIC_UICTR, tmp);
+
+	/* Set interrupt polarity */
+	tmp = CPC700_IN_32(CPC700_UIC_UICPR);
+	if (cpc700_irq_assigns[irq][1]) {
+		tmp |= CPC700_UIC_IRQ_BIT(irq);
+	} else {
+		tmp &= ~CPC700_UIC_IRQ_BIT(irq);
+	}
+	CPC700_OUT_32(CPC700_UIC_UICPR, tmp);
+
+	/* Set interrupt critical */
+	tmp = CPC700_IN_32(CPC700_UIC_UICCR);
+	tmp |= CPC700_UIC_IRQ_BIT(irq);
+	CPC700_OUT_32(CPC700_UIC_UICCR, tmp);
+		
+	return;
+}
+
+__init void
+cpc700_init_IRQ(void)
+{
+	int i;
+
+	ppc_cached_irq_mask[0] = 0;
+	CPC700_OUT_32(CPC700_UIC_UICER, 0x00000000);    /* Disable all irq's */
+	CPC700_OUT_32(CPC700_UIC_UICSR, 0xffffffff);    /* Clear cur intrs */
+	CPC700_OUT_32(CPC700_UIC_UICCR, 0xffffffff);    /* Gen INT not MCP */
+	CPC700_OUT_32(CPC700_UIC_UICPR, 0x00000000);    /* Active low */
+	CPC700_OUT_32(CPC700_UIC_UICTR, 0x00000000);    /* Level Sensitive */
+	CPC700_OUT_32(CPC700_UIC_UICVR, CPC700_UIC_UICVCR_0_HI);
+						        /* IRQ 0 is highest */
+
+	for (i = 0; i < 17; i++) {
+		irq_desc[i].handler = &cpc700_pic;
+		cpc700_pic_init_irq(i);
+	}
+
+	for (i = 20; i < 32; i++) {
+		irq_desc[i].handler = &cpc700_pic;
+		cpc700_pic_init_irq(i);
+	}
+
+	return;
+}
+
+
+
+/*
+ * Find the highest IRQ that generating an interrupt, if any.
+ */
+int
+cpc700_get_irq(struct pt_regs *regs)
+{
+	int irq = 0;
+	u_int irq_status, irq_test = 1;
+
+	irq_status = CPC700_IN_32(CPC700_UIC_UICMSR);
+
+	do
+	{
+		if (irq_status & irq_test)
+			break;
+		irq++;
+		irq_test <<= 1;
+	} while (irq < NR_IRQS);
+	
+
+	if (irq == NR_IRQS)
+	    irq = 33;
+
+	return (31 - irq);
+}
diff --git a/arch/ppc/syslib/cpc710.h b/arch/ppc/syslib/cpc710.h
new file mode 100644
index 000000000000..cc0afd804029
--- /dev/null
+++ b/arch/ppc/syslib/cpc710.h
@@ -0,0 +1,83 @@
+/*
+ * arch/ppc/syslib/cpc710.h
+ *
+ * Definitions for the IBM CPC710 PCI Host Bridge
+ *
+ * Author: Matt Porter <mporter@mvista.com>
+ *
+ * 2001 (c) MontaVista, Software, Inc.  This file is licensed under
+ * the terms of the GNU General Public License version 2.  This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#ifndef __PPC_PLATFORMS_CPC710_H
+#define __PPC_PLATFORMS_CPC710_H
+
+/* General bridge and memory controller registers */
+#define PIDR	0xff000008
+#define	CNFR	0xff00000c
+#define	RSTR	0xff000010
+#define UCTL	0xff001000
+#define	MPSR	0xff001010
+#define	SIOC	0xff001020
+#define	ABCNTL	0xff001030
+#define SRST	0xff001040
+#define	ERRC	0xff001050
+#define	SESR	0xff001060
+#define	SEAR	0xff001070
+#define	SIOC1	0xff001090
+#define	PGCHP	0xff001100
+#define	GPDIR	0xff001130
+#define	GPOUT	0xff001150
+#define	ATAS	0xff001160
+#define	AVDG	0xff001170
+#define	MCCR	0xff001200
+#define	MESR	0xff001220
+#define	MEAR	0xff001230
+#define	MCER0	0xff001300
+#define	MCER1	0xff001310
+#define	MCER2	0xff001320
+#define	MCER3	0xff001330
+#define	MCER4	0xff001340
+#define	MCER5	0xff001350
+#define	MCER6	0xff001360
+#define	MCER7	0xff001370
+
+/*
+ * PCI32/64 configuration registers
+ * Given as offsets from their
+ * respective physical segment BAR
+ */
+#define PIBAR	0x000f7800
+#define PMBAR	0x000f7810
+#define MSIZE	0x000f7f40
+#define IOSIZE	0x000f7f60
+#define SMBAR	0x000f7f80
+#define SIBAR	0x000f7fc0
+#define PSSIZE	0x000f8100
+#define PPSIZE	0x000f8110
+#define BARPS	0x000f8120
+#define BARPP	0x000f8130
+#define PSBAR	0x000f8140
+#define PPBAR	0x000f8150
+#define BPMDLK	0x000f8200      /* Bottom of Peripheral Memory Space */
+#define TPMDLK	0x000f8210      /* Top of Peripheral Memory Space */
+#define BIODLK	0x000f8220      /* Bottom of Peripheral I/O Space */
+#define TIODLK	0x000f8230      /* Top of Perioheral I/O Space */
+#define DLKCTRL	0x000f8240      /* Deadlock control */
+#define DLKDEV	0x000f8250      /* Deadlock device */
+
+/* System standard configuration registers space */
+#define	DCR	0xff200000
+#define	DID	0xff200004
+#define	BAR	0xff200018
+
+/* Device specific configuration space */
+#define	PCIENB	0xff201000
+
+/* Configuration space registers */
+#define CPC710_BUS_NUMBER	0x40
+#define CPC710_SUB_BUS_NUMBER	0x41
+
+#endif /* __PPC_PLATFORMS_CPC710_H */
diff --git a/arch/ppc/syslib/cpm2_common.c b/arch/ppc/syslib/cpm2_common.c
new file mode 100644
index 000000000000..ea5e77080e8d
--- /dev/null
+++ b/arch/ppc/syslib/cpm2_common.c
@@ -0,0 +1,198 @@
+/*
+ * General Purpose functions for the global management of the
+ * 8260 Communication Processor Module.
+ * Copyright (c) 1999 Dan Malek (dmalek@jlc.net)
+ * Copyright (c) 2000 MontaVista Software, Inc (source@mvista.com)
+ *	2.3.99 Updates
+ *
+ * In addition to the individual control of the communication
+ * channels, there are a few functions that globally affect the
+ * communication processor.
+ *
+ * Buffer descriptors must be allocated from the dual ported memory
+ * space.  The allocator for that is here.  When the communication
+ * process is reset, we reclaim the memory available.  There is
+ * currently no deallocator for this memory.
+ */
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+#include <linux/bootmem.h>
+#include <linux/module.h>
+#include <asm/irq.h>
+#include <asm/mpc8260.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/immap_cpm2.h>
+#include <asm/cpm2.h>
+#include <asm/rheap.h>
+
+static void cpm2_dpinit(void);
+cpm_cpm2_t	*cpmp;		/* Pointer to comm processor space */
+
+/* We allocate this here because it is used almost exclusively for
+ * the communication processor devices.
+ */
+cpm2_map_t *cpm2_immr;
+
+#define CPM_MAP_SIZE	(0x40000)	/* 256k - the PQ3 reserve this amount
+					   of space for CPM as it is larger
+					   than on PQ2 */
+
+void
+cpm2_reset(void)
+{
+	cpm2_immr = (cpm2_map_t *)ioremap(CPM_MAP_ADDR, CPM_MAP_SIZE);
+
+	/* Reclaim the DP memory for our use.
+	 */
+	cpm2_dpinit();
+
+	/* Tell everyone where the comm processor resides.
+	 */
+	cpmp = &cpm2_immr->im_cpm;
+}
+
+/* Set a baud rate generator.  This needs lots of work.  There are
+ * eight BRGs, which can be connected to the CPM channels or output
+ * as clocks.  The BRGs are in two different block of internal
+ * memory mapped space.
+ * The baud rate clock is the system clock divided by something.
+ * It was set up long ago during the initial boot phase and is
+ * is given to us.
+ * Baud rate clocks are zero-based in the driver code (as that maps
+ * to port numbers).  Documentation uses 1-based numbering.
+ */
+#define BRG_INT_CLK	(((bd_t *)__res)->bi_brgfreq)
+#define BRG_UART_CLK	(BRG_INT_CLK/16)
+
+/* This function is used by UARTS, or anything else that uses a 16x
+ * oversampled clock.
+ */
+void
+cpm_setbrg(uint brg, uint rate)
+{
+	volatile uint	*bp;
+
+	/* This is good enough to get SMCs running.....
+	*/
+	if (brg < 4) {
+		bp = (uint *)&cpm2_immr->im_brgc1;
+	}
+	else {
+		bp = (uint *)&cpm2_immr->im_brgc5;
+		brg -= 4;
+	}
+	bp += brg;
+	*bp = ((BRG_UART_CLK / rate) << 1) | CPM_BRG_EN;
+}
+
+/* This function is used to set high speed synchronous baud rate
+ * clocks.
+ */
+void
+cpm2_fastbrg(uint brg, uint rate, int div16)
+{
+	volatile uint	*bp;
+
+	if (brg < 4) {
+		bp = (uint *)&cpm2_immr->im_brgc1;
+	}
+	else {
+		bp = (uint *)&cpm2_immr->im_brgc5;
+		brg -= 4;
+	}
+	bp += brg;
+	*bp = ((BRG_INT_CLK / rate) << 1) | CPM_BRG_EN;
+	if (div16)
+		*bp |= CPM_BRG_DIV16;
+}
+
+/*
+ * dpalloc / dpfree bits.
+ */
+static spinlock_t cpm_dpmem_lock;
+/* 16 blocks should be enough to satisfy all requests
+ * until the memory subsystem goes up... */
+static rh_block_t cpm_boot_dpmem_rh_block[16];
+static rh_info_t cpm_dpmem_info;
+
+static void cpm2_dpinit(void)
+{
+	spin_lock_init(&cpm_dpmem_lock);
+
+	/* initialize the info header */
+	rh_init(&cpm_dpmem_info, 1,
+			sizeof(cpm_boot_dpmem_rh_block) /
+			sizeof(cpm_boot_dpmem_rh_block[0]),
+			cpm_boot_dpmem_rh_block);
+
+	/* Attach the usable dpmem area */
+	/* XXX: This is actually crap. CPM_DATAONLY_BASE and
+	 * CPM_DATAONLY_SIZE is only a subset of the available dpram. It
+	 * varies with the processor and the microcode patches activated.
+	 * But the following should be at least safe.
+	 */
+	rh_attach_region(&cpm_dpmem_info, (void *)CPM_DATAONLY_BASE,
+			CPM_DATAONLY_SIZE);
+}
+
+/* This function returns an index into the DPRAM area.
+ */
+uint cpm_dpalloc(uint size, uint align)
+{
+	void *start;
+	unsigned long flags;
+
+	spin_lock_irqsave(&cpm_dpmem_lock, flags);
+	cpm_dpmem_info.alignment = align;
+	start = rh_alloc(&cpm_dpmem_info, size, "commproc");
+	spin_unlock_irqrestore(&cpm_dpmem_lock, flags);
+
+	return (uint)start;
+}
+EXPORT_SYMBOL(cpm_dpalloc);
+
+int cpm_dpfree(uint offset)
+{
+	int ret;
+	unsigned long flags;
+
+	spin_lock_irqsave(&cpm_dpmem_lock, flags);
+	ret = rh_free(&cpm_dpmem_info, (void *)offset);
+	spin_unlock_irqrestore(&cpm_dpmem_lock, flags);
+
+	return ret;
+}
+EXPORT_SYMBOL(cpm_dpfree);
+
+/* not sure if this is ever needed */
+uint cpm_dpalloc_fixed(uint offset, uint size, uint align)
+{
+	void *start;
+	unsigned long flags;
+
+	spin_lock_irqsave(&cpm_dpmem_lock, flags);
+	cpm_dpmem_info.alignment = align;
+	start = rh_alloc_fixed(&cpm_dpmem_info, (void *)offset, size, "commproc");
+	spin_unlock_irqrestore(&cpm_dpmem_lock, flags);
+
+	return (uint)start;
+}
+EXPORT_SYMBOL(cpm_dpalloc_fixed);
+
+void cpm_dpdump(void)
+{
+	rh_dump(&cpm_dpmem_info);
+}
+EXPORT_SYMBOL(cpm_dpdump);
+
+void *cpm_dpram_addr(uint offset)
+{
+	return (void *)&cpm2_immr->im_dprambase[offset];
+}
+EXPORT_SYMBOL(cpm_dpram_addr);
diff --git a/arch/ppc/syslib/cpm2_pic.c b/arch/ppc/syslib/cpm2_pic.c
new file mode 100644
index 000000000000..954b07fc1df3
--- /dev/null
+++ b/arch/ppc/syslib/cpm2_pic.c
@@ -0,0 +1,172 @@
+/* The CPM2 internal interrupt controller.  It is usually
+ * the only interrupt controller.
+ * There are two 32-bit registers (high/low) for up to 64
+ * possible interrupts.
+ *
+ * Now, the fun starts.....Interrupt Numbers DO NOT MAP
+ * in a simple arithmetic fashion to mask or pending registers.
+ * That is, interrupt 4 does not map to bit position 4.
+ * We create two tables, indexed by vector number, to indicate
+ * which register to use and which bit in the register to use.
+ */
+
+#include <linux/stddef.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/signal.h>
+#include <linux/irq.h>
+
+#include <asm/immap_cpm2.h>
+#include <asm/mpc8260.h>
+
+#include "cpm2_pic.h"
+
+static	u_char	irq_to_siureg[] = {
+	1, 1, 1, 1, 1, 1, 1, 1,
+	1, 1, 1, 1, 1, 1, 1, 1,
+	0, 0, 0, 0, 0, 0, 0, 0,
+	0, 0, 0, 0, 0, 0, 0, 0,
+	1, 1, 1, 1, 1, 1, 1, 1,
+	1, 1, 1, 1, 1, 1, 1, 1,
+	0, 0, 0, 0, 0, 0, 0, 0,
+	0, 0, 0, 0, 0, 0, 0, 0
+};
+
+/* bit numbers do not match the docs, these are precomputed so the bit for
+ * a given irq is (1 << irq_to_siubit[irq]) */
+static	u_char	irq_to_siubit[] = {
+	 0, 15, 14, 13, 12, 11, 10,  9,
+	 8,  7,  6,  5,  4,  3,  2,  1,
+	 2,  1, 15, 14, 13, 12, 11, 10,
+	 9,  8,  7,  6,  5,  4,  3,  0,
+	31, 30, 29, 28, 27, 26, 25, 24,
+	23, 22, 21, 20, 19, 18, 17, 16,
+	16, 17, 18, 19, 20, 21, 22, 23,
+	24, 25, 26, 27, 28, 29, 30, 31,
+};
+
+static void cpm2_mask_irq(unsigned int irq_nr)
+{
+	int	bit, word;
+	volatile uint	*simr;
+
+	irq_nr -= CPM_IRQ_OFFSET;
+
+	bit = irq_to_siubit[irq_nr];
+	word = irq_to_siureg[irq_nr];
+
+	simr = &(cpm2_immr->im_intctl.ic_simrh);
+	ppc_cached_irq_mask[word] &= ~(1 << bit);
+	simr[word] = ppc_cached_irq_mask[word];
+}
+
+static void cpm2_unmask_irq(unsigned int irq_nr)
+{
+	int	bit, word;
+	volatile uint	*simr;
+
+	irq_nr -= CPM_IRQ_OFFSET;
+
+	bit = irq_to_siubit[irq_nr];
+	word = irq_to_siureg[irq_nr];
+
+	simr = &(cpm2_immr->im_intctl.ic_simrh);
+	ppc_cached_irq_mask[word] |= 1 << bit;
+	simr[word] = ppc_cached_irq_mask[word];
+}
+
+static void cpm2_mask_and_ack(unsigned int irq_nr)
+{
+	int	bit, word;
+	volatile uint	*simr, *sipnr;
+
+	irq_nr -= CPM_IRQ_OFFSET;
+
+	bit = irq_to_siubit[irq_nr];
+	word = irq_to_siureg[irq_nr];
+
+	simr = &(cpm2_immr->im_intctl.ic_simrh);
+	sipnr = &(cpm2_immr->im_intctl.ic_sipnrh);
+	ppc_cached_irq_mask[word] &= ~(1 << bit);
+	simr[word] = ppc_cached_irq_mask[word];
+	sipnr[word] = 1 << bit;
+}
+
+static void cpm2_end_irq(unsigned int irq_nr)
+{
+	int	bit, word;
+	volatile uint	*simr;
+
+	if (!(irq_desc[irq_nr].status & (IRQ_DISABLED|IRQ_INPROGRESS))
+			&& irq_desc[irq_nr].action) {
+
+		irq_nr -= CPM_IRQ_OFFSET;
+		bit = irq_to_siubit[irq_nr];
+		word = irq_to_siureg[irq_nr];
+
+		simr = &(cpm2_immr->im_intctl.ic_simrh);
+		ppc_cached_irq_mask[word] |= 1 << bit;
+		simr[word] = ppc_cached_irq_mask[word];
+	}
+}
+
+static struct hw_interrupt_type cpm2_pic = {
+	.typename = " CPM2 SIU ",
+	.enable = cpm2_unmask_irq,
+	.disable = cpm2_mask_irq,
+	.ack = cpm2_mask_and_ack,
+	.end = cpm2_end_irq,
+};
+
+int cpm2_get_irq(struct pt_regs *regs)
+{
+	int irq;
+        unsigned long bits;
+
+        /* For CPM2, read the SIVEC register and shift the bits down
+         * to get the irq number.         */
+        bits = cpm2_immr->im_intctl.ic_sivec;
+        irq = bits >> 26;
+
+	if (irq == 0)
+		return(-1);
+	return irq+CPM_IRQ_OFFSET;
+}
+
+void cpm2_init_IRQ(void)
+{
+	int i;
+
+	/* Clear the CPM IRQ controller, in case it has any bits set
+	 * from the bootloader
+	 */
+
+	/* Mask out everything */
+	cpm2_immr->im_intctl.ic_simrh = 0x00000000;
+	cpm2_immr->im_intctl.ic_simrl = 0x00000000;
+	wmb();
+
+	/* Ack everything */
+	cpm2_immr->im_intctl.ic_sipnrh = 0xffffffff;
+	cpm2_immr->im_intctl.ic_sipnrl = 0xffffffff;
+	wmb();
+
+	/* Dummy read of the vector */
+	i = cpm2_immr->im_intctl.ic_sivec;
+	rmb();
+
+	/* Initialize the default interrupt mapping priorities,
+	 * in case the boot rom changed something on us.
+	 */
+	cpm2_immr->im_intctl.ic_sicr = 0;
+	cpm2_immr->im_intctl.ic_scprrh = 0x05309770;
+	cpm2_immr->im_intctl.ic_scprrl = 0x05309770;
+
+
+	/* Enable chaining to OpenPIC, and make everything level
+	 */
+	for (i = 0; i < NR_CPM_INTS; i++) {
+		irq_desc[i+CPM_IRQ_OFFSET].handler = &cpm2_pic;
+		irq_desc[i+CPM_IRQ_OFFSET].status |= IRQ_LEVEL;
+	}
+}
diff --git a/arch/ppc/syslib/cpm2_pic.h b/arch/ppc/syslib/cpm2_pic.h
new file mode 100644
index 000000000000..97cab8f13a1a
--- /dev/null
+++ b/arch/ppc/syslib/cpm2_pic.h
@@ -0,0 +1,8 @@
+#ifndef _PPC_KERNEL_CPM2_H
+#define _PPC_KERNEL_CPM2_H
+
+extern int cpm2_get_irq(struct pt_regs *regs);
+
+extern void cpm2_init_IRQ(void);
+
+#endif /* _PPC_KERNEL_CPM2_H */
diff --git a/arch/ppc/syslib/dcr.S b/arch/ppc/syslib/dcr.S
new file mode 100644
index 000000000000..895f10243a43
--- /dev/null
+++ b/arch/ppc/syslib/dcr.S
@@ -0,0 +1,41 @@
+/*
+ * arch/ppc/syslib/dcr.S
+ *
+ * "Indirect" DCR access
+ *
+ * Copyright (c) 2004 Eugene Surovegin <ebs@ebshome.net>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under  the terms of  the GNU General Public License as published by the
+ * Free Software Foundation;  either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <asm/ppc_asm.h>
+#include <asm/processor.h>
+
+#define DCR_ACCESS_PROLOG(table) \
+	rlwinm  r3,r3,4,18,27;   \
+	lis     r5,table@h;      \
+	ori     r5,r5,table@l;   \
+	add     r3,r3,r5;        \
+	mtctr   r3;              \
+	bctr
+
+_GLOBAL(__mfdcr)
+	DCR_ACCESS_PROLOG(__mfdcr_table)
+
+_GLOBAL(__mtdcr)
+	DCR_ACCESS_PROLOG(__mtdcr_table)
+
+__mfdcr_table:
+	mfdcr  r3,0; blr
+__mtdcr_table:
+	mtdcr  0,r4; blr
+
+dcr     = 1
+        .rept   1023
+	mfdcr   r3,dcr; blr
+	mtdcr   dcr,r4; blr
+	dcr     = dcr + 1
+	.endr
diff --git a/arch/ppc/syslib/gen550.h b/arch/ppc/syslib/gen550.h
new file mode 100644
index 000000000000..039d249e19a8
--- /dev/null
+++ b/arch/ppc/syslib/gen550.h
@@ -0,0 +1,16 @@
+/*
+ * arch/ppc/syslib/gen550.h
+ *
+ * gen550 prototypes
+ *
+ * Matt Porter <mporter@kernel.crashing.org>
+ *
+ * 2004 (c) MontaVista Software, Inc.  This file is licensed under
+ * the terms of the GNU General Public License version 2.  This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+extern void gen550_progress(char *, unsigned short);
+extern void gen550_init(int, struct uart_port *);
+extern void gen550_kgdb_map_scc(void);
diff --git a/arch/ppc/syslib/gen550_dbg.c b/arch/ppc/syslib/gen550_dbg.c
new file mode 100644
index 000000000000..9ef0113c83d1
--- /dev/null
+++ b/arch/ppc/syslib/gen550_dbg.c
@@ -0,0 +1,182 @@
+/*
+ * arch/ppc/syslib/gen550_dbg.c
+ *
+ * A library of polled 16550 serial routines.  These are intended to
+ * be used to support progress messages, xmon, kgdb, etc. on a
+ * variety of platforms.
+ *
+ * Adapted from lots of code ripped from the arch/ppc/boot/ polled
+ * 16550 support.
+ *
+ * Author: Matt Porter <mporter@mvista.com>
+ *
+ * 2002-2003 (c) MontaVista Software, Inc.  This file is licensed under
+ * the terms of the GNU General Public License version 2.  This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/serial.h>
+#include <linux/tty.h>		/* For linux/serial_core.h */
+#include <linux/serial_core.h>
+#include <linux/serialP.h>
+#include <linux/serial_reg.h>
+#include <asm/machdep.h>
+#include <asm/serial.h>
+#include <asm/io.h>
+
+#define SERIAL_BAUD	9600
+
+/* SERIAL_PORT_DFNS is defined in <asm/serial.h> */
+#ifndef SERIAL_PORT_DFNS
+#define SERIAL_PORT_DFNS
+#endif
+
+static struct serial_state rs_table[RS_TABLE_SIZE] = {
+	SERIAL_PORT_DFNS	/* defined in <asm/serial.h> */
+};
+
+static void (*serial_outb)(unsigned long, unsigned char);
+static unsigned long (*serial_inb)(unsigned long);
+
+static int shift;
+
+unsigned long direct_inb(unsigned long addr)
+{
+	return readb((void __iomem *)addr);
+}
+
+void direct_outb(unsigned long addr, unsigned char val)
+{
+	writeb(val, (void __iomem *)addr);
+}
+
+unsigned long io_inb(unsigned long port)
+{
+	return inb(port);
+}
+
+void io_outb(unsigned long port, unsigned char val)
+{
+	outb(val, port);
+}
+
+unsigned long serial_init(int chan, void *ignored)
+{
+	unsigned long com_port;
+	unsigned char lcr, dlm;
+
+	/* We need to find out which type io we're expecting.  If it's
+	 * 'SERIAL_IO_PORT', we get an offset from the isa_io_base.
+	 * If it's 'SERIAL_IO_MEM', we can the exact location.  -- Tom */
+	switch (rs_table[chan].io_type) {
+		case SERIAL_IO_PORT:
+			com_port = rs_table[chan].port;
+			serial_outb = io_outb;
+			serial_inb = io_inb;
+			break;
+		case SERIAL_IO_MEM:
+			com_port = (unsigned long)rs_table[chan].iomem_base;
+			serial_outb = direct_outb;
+			serial_inb = direct_inb;
+			break;
+		default:
+			/* We can't deal with it. */
+			return -1;
+	}
+
+	/* How far apart the registers are. */
+	shift = rs_table[chan].iomem_reg_shift;
+
+	/* save the LCR */
+	lcr = serial_inb(com_port + (UART_LCR << shift));
+	
+	/* Access baud rate */
+	serial_outb(com_port + (UART_LCR << shift), UART_LCR_DLAB);
+	dlm = serial_inb(com_port + (UART_DLM << shift));
+
+	/*
+	 * Test if serial port is unconfigured
+	 * We assume that no-one uses less than 110 baud or
+	 * less than 7 bits per character these days.
+	 *  -- paulus.
+	 */
+	if ((dlm <= 4) && (lcr & 2)) {
+		/* port is configured, put the old LCR back */
+		serial_outb(com_port + (UART_LCR << shift), lcr);
+	}
+	else {
+		/* Input clock. */
+		serial_outb(com_port + (UART_DLL << shift),
+			(rs_table[chan].baud_base / SERIAL_BAUD) & 0xFF);
+		serial_outb(com_port + (UART_DLM << shift),
+				(rs_table[chan].baud_base / SERIAL_BAUD) >> 8);
+		/* 8 data, 1 stop, no parity */
+		serial_outb(com_port + (UART_LCR << shift), 0x03);
+		/* RTS/DTR */
+		serial_outb(com_port + (UART_MCR << shift), 0x03);
+
+		/* Clear & enable FIFOs */
+		serial_outb(com_port + (UART_FCR << shift), 0x07);
+	}
+
+	return (com_port);
+}
+
+void
+serial_putc(unsigned long com_port, unsigned char c)
+{
+	while ((serial_inb(com_port + (UART_LSR << shift)) & UART_LSR_THRE) == 0)
+		;
+	serial_outb(com_port, c);
+}
+
+unsigned char
+serial_getc(unsigned long com_port)
+{
+	while ((serial_inb(com_port + (UART_LSR << shift)) & UART_LSR_DR) == 0)
+		;
+	return serial_inb(com_port);
+}
+
+int
+serial_tstc(unsigned long com_port)
+{
+	return ((serial_inb(com_port + (UART_LSR << shift)) & UART_LSR_DR) != 0);
+}
+
+void
+serial_close(unsigned long com_port)
+{
+}
+
+void
+gen550_init(int i, struct uart_port *serial_req)
+{
+	rs_table[i].io_type = serial_req->iotype;
+	rs_table[i].port = serial_req->iobase;
+	rs_table[i].iomem_base = serial_req->membase;
+	rs_table[i].iomem_reg_shift = serial_req->regshift;
+	rs_table[i].baud_base = serial_req->uartclk ? serial_req->uartclk / 16 : BASE_BAUD;
+}
+
+#ifdef CONFIG_SERIAL_TEXT_DEBUG
+void
+gen550_progress(char *s, unsigned short hex)
+{
+	volatile unsigned int progress_debugport;
+	volatile char c;
+
+	progress_debugport = serial_init(0, NULL);
+
+	serial_putc(progress_debugport, '\r');
+
+	while ((c = *s++) != 0)
+		serial_putc(progress_debugport, c);
+
+	serial_putc(progress_debugport, '\n');
+	serial_putc(progress_debugport, '\r');
+}
+#endif /* CONFIG_SERIAL_TEXT_DEBUG */
diff --git a/arch/ppc/syslib/gen550_kgdb.c b/arch/ppc/syslib/gen550_kgdb.c
new file mode 100644
index 000000000000..7239d5d7ddcd
--- /dev/null
+++ b/arch/ppc/syslib/gen550_kgdb.c
@@ -0,0 +1,86 @@
+/*
+ * arch/ppc/syslib/gen550_kgdb.c
+ *
+ * Generic 16550 kgdb support intended to be useful on a variety
+ * of platforms.  To enable this support, it is necessary to set
+ * the CONFIG_GEN550 option.  Any virtual mapping of the serial
+ * port(s) to be used can be accomplished by setting
+ * ppc_md.early_serial_map to a platform-specific mapping function.
+ *
+ * Adapted from ppc4xx_kgdb.c.
+ *
+ * Author: Matt Porter <mporter@kernel.crashing.org>
+ *
+ * 2002-2004 (c) MontaVista Software, Inc.  This file is licensed under
+ * the terms of the GNU General Public License version 2.  This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+
+#include <asm/machdep.h>
+
+extern unsigned long serial_init(int, void *);
+extern unsigned long serial_getc(unsigned long);
+extern unsigned long serial_putc(unsigned long, unsigned char);
+
+#if defined(CONFIG_KGDB_TTYS0)
+#define KGDB_PORT 0
+#elif defined(CONFIG_KGDB_TTYS1)
+#define KGDB_PORT 1
+#elif defined(CONFIG_KGDB_TTYS2)
+#define KGDB_PORT 2
+#elif defined(CONFIG_KGDB_TTYS3)
+#define KGDB_PORT 3
+#else
+#error "invalid kgdb_tty port"
+#endif
+
+static volatile unsigned int kgdb_debugport;
+
+void putDebugChar(unsigned char c)
+{
+	if (kgdb_debugport == 0)
+		kgdb_debugport = serial_init(KGDB_PORT, NULL);
+
+	serial_putc(kgdb_debugport, c);
+}
+
+int getDebugChar(void)
+{
+	if (kgdb_debugport == 0)
+		kgdb_debugport = serial_init(KGDB_PORT, NULL);
+
+	return(serial_getc(kgdb_debugport));
+}
+
+void kgdb_interruptible(int enable)
+{
+	return;
+}
+
+void putDebugString(char* str)
+{
+	while (*str != '\0') {
+		putDebugChar(*str);
+		str++;
+	}
+	putDebugChar('\r');
+	return;
+}
+
+/*
+ * Note: gen550_init() must be called already on the port we are going
+ * to use.
+ */
+void
+gen550_kgdb_map_scc(void)
+{
+	printk(KERN_DEBUG "kgdb init\n");
+	if (ppc_md.early_serial_map)
+		ppc_md.early_serial_map();
+	kgdb_debugport = serial_init(KGDB_PORT, NULL);
+}
diff --git a/arch/ppc/syslib/gt64260_pic.c b/arch/ppc/syslib/gt64260_pic.c
new file mode 100644
index 000000000000..44aa87385451
--- /dev/null
+++ b/arch/ppc/syslib/gt64260_pic.c
@@ -0,0 +1,328 @@
+/*
+ * arch/ppc/syslib/gt64260_pic.c
+ *
+ * Interrupt controller support for Galileo's GT64260.
+ *
+ * Author: Chris Zankel <source@mvista.com>
+ * Modified by: Mark A. Greer <mgreer@mvista.com>
+ *
+ * Based on sources from Rabeeh Khoury / Galileo Technology
+ *
+ * 2001 (c) MontaVista, Software, Inc.  This file is licensed under
+ * the terms of the GNU General Public License version 2.  This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+/*
+ * This file contains the specific functions to support the GT64260
+ * interrupt controller.
+ *
+ * The GT64260 has two main interrupt registers (high and low) that
+ * summarizes the interrupts generated by the units of the GT64260.
+ * Each bit is assigned to an interrupt number, where the low register
+ * are assigned from IRQ0 to IRQ31 and the high cause register
+ * from IRQ32 to IRQ63
+ * The GPP (General Purpose Port) interrupts are assigned from IRQ64 (GPP0)
+ * to IRQ95 (GPP31).
+ * get_irq() returns the lowest interrupt number that is currently asserted.
+ *
+ * Note:
+ *  - This driver does not initialize the GPP when used as an interrupt
+ *    input.
+ */
+
+#include <linux/stddef.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include <linux/signal.h>
+#include <linux/stddef.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+
+#include <asm/io.h>
+#include <asm/system.h>
+#include <asm/irq.h>
+#include <asm/mv64x60.h>
+
+#define CPU_INTR_STR	"gt64260 cpu interface error"
+#define PCI0_INTR_STR	"gt64260 pci 0 error"
+#define PCI1_INTR_STR	"gt64260 pci 1 error"
+
+/* ========================== forward declaration ========================== */
+
+static void gt64260_unmask_irq(unsigned int);
+static void gt64260_mask_irq(unsigned int);
+
+/* ========================== local declarations =========================== */
+
+struct hw_interrupt_type gt64260_pic = {
+	.typename = " gt64260_pic ",
+	.enable   = gt64260_unmask_irq,
+	.disable  = gt64260_mask_irq,
+	.ack      = gt64260_mask_irq,
+	.end      = gt64260_unmask_irq,
+};
+
+u32 gt64260_irq_base = 0;	/* GT64260 handles the next 96 IRQs from here */
+
+static struct mv64x60_handle bh;
+
+/* gt64260_init_irq()
+ *
+ *  This function initializes the interrupt controller. It assigns
+ *  all interrupts from IRQ0 to IRQ95 to the gt64260 interrupt controller.
+ *
+ * Note:
+ *  We register all GPP inputs as interrupt source, but disable them.
+ */
+void __init
+gt64260_init_irq(void)
+{
+	int i;
+
+	if (ppc_md.progress)
+		ppc_md.progress("gt64260_init_irq: enter", 0x0);
+
+	bh.v_base = mv64x60_get_bridge_vbase();
+
+	ppc_cached_irq_mask[0] = 0;
+	ppc_cached_irq_mask[1] = 0x0f000000;	/* Enable GPP intrs */
+	ppc_cached_irq_mask[2] = 0;
+
+	/* disable all interrupts and clear current interrupts */
+	mv64x60_write(&bh, MV64x60_GPP_INTR_MASK, ppc_cached_irq_mask[2]);
+	mv64x60_write(&bh, MV64x60_GPP_INTR_CAUSE, 0);
+	mv64x60_write(&bh, GT64260_IC_CPU_INTR_MASK_LO, ppc_cached_irq_mask[0]);
+	mv64x60_write(&bh, GT64260_IC_CPU_INTR_MASK_HI, ppc_cached_irq_mask[1]);
+
+	/* use the gt64260 for all (possible) interrupt sources */
+	for (i = gt64260_irq_base; i < (gt64260_irq_base + 96); i++)
+		irq_desc[i].handler = &gt64260_pic;
+
+	if (ppc_md.progress)
+		ppc_md.progress("gt64260_init_irq: exit", 0x0);
+}
+
+/*
+ * gt64260_get_irq()
+ *
+ *  This function returns the lowest interrupt number of all interrupts that
+ *  are currently asserted.
+ *
+ * Input Variable(s):
+ *  struct pt_regs*	not used
+ *
+ * Output Variable(s):
+ *  None.
+ *
+ * Returns:
+ *  int	<interrupt number> or -2 (bogus interrupt)
+ */
+int
+gt64260_get_irq(struct pt_regs *regs)
+{
+	int irq;
+	int irq_gpp;
+
+	irq = mv64x60_read(&bh, GT64260_IC_MAIN_CAUSE_LO);
+	irq = __ilog2((irq & 0x3dfffffe) & ppc_cached_irq_mask[0]);
+
+	if (irq == -1) {
+		irq = mv64x60_read(&bh, GT64260_IC_MAIN_CAUSE_HI);
+		irq = __ilog2((irq & 0x0f000db7) & ppc_cached_irq_mask[1]);
+
+		if (irq == -1)
+			irq = -2; /* bogus interrupt, should never happen */
+		else {
+			if (irq >= 24) {
+				irq_gpp = mv64x60_read(&bh,
+					MV64x60_GPP_INTR_CAUSE);
+				irq_gpp = __ilog2(irq_gpp &
+					ppc_cached_irq_mask[2]);
+
+				if (irq_gpp == -1)
+					irq = -2;
+				else {
+					irq = irq_gpp + 64;
+					mv64x60_write(&bh,
+						MV64x60_GPP_INTR_CAUSE,
+						~(1 << (irq - 64)));
+				}
+			} else
+				irq += 32;
+		}
+	}
+
+	(void)mv64x60_read(&bh, MV64x60_GPP_INTR_CAUSE);
+
+	if (irq < 0)
+		return (irq);
+	else
+		return (gt64260_irq_base + irq);
+}
+
+/* gt64260_unmask_irq()
+ *
+ *  This function enables an interrupt.
+ *
+ * Input Variable(s):
+ *  unsigned int	interrupt number (IRQ0...IRQ95).
+ *
+ * Output Variable(s):
+ *  None.
+ *
+ * Returns:
+ *  void
+ */
+static void
+gt64260_unmask_irq(unsigned int irq)
+{
+	irq -= gt64260_irq_base;
+
+	if (irq > 31)
+		if (irq > 63) /* unmask GPP irq */
+			mv64x60_write(&bh, MV64x60_GPP_INTR_MASK,
+				ppc_cached_irq_mask[2] |= (1 << (irq - 64)));
+		else /* mask high interrupt register */
+			mv64x60_write(&bh, GT64260_IC_CPU_INTR_MASK_HI,
+				ppc_cached_irq_mask[1] |= (1 << (irq - 32)));
+	else /* mask low interrupt register */
+		mv64x60_write(&bh, GT64260_IC_CPU_INTR_MASK_LO,
+			ppc_cached_irq_mask[0] |= (1 << irq));
+
+	(void)mv64x60_read(&bh, MV64x60_GPP_INTR_MASK);
+	return;
+}
+
+/* gt64260_mask_irq()
+ *
+ *  This function disables the requested interrupt.
+ *
+ * Input Variable(s):
+ *  unsigned int	interrupt number (IRQ0...IRQ95).
+ *
+ * Output Variable(s):
+ *  None.
+ *
+ * Returns:
+ *  void
+ */
+static void
+gt64260_mask_irq(unsigned int irq)
+{
+	irq -= gt64260_irq_base;
+
+	if (irq > 31)
+		if (irq > 63) /* mask GPP irq */
+			mv64x60_write(&bh, MV64x60_GPP_INTR_MASK,
+				ppc_cached_irq_mask[2] &= ~(1 << (irq - 64)));
+		else /* mask high interrupt register */
+			mv64x60_write(&bh, GT64260_IC_CPU_INTR_MASK_HI,
+				ppc_cached_irq_mask[1] &= ~(1 << (irq - 32)));
+	else /* mask low interrupt register */
+		mv64x60_write(&bh, GT64260_IC_CPU_INTR_MASK_LO,
+			ppc_cached_irq_mask[0] &= ~(1 << irq));
+
+	(void)mv64x60_read(&bh, MV64x60_GPP_INTR_MASK);
+	return;
+}
+
+static irqreturn_t
+gt64260_cpu_error_int_handler(int irq, void *dev_id, struct pt_regs *regs)
+{
+	printk(KERN_ERR "gt64260_cpu_error_int_handler: %s 0x%08x\n",
+		"Error on CPU interface - Cause regiser",
+		mv64x60_read(&bh, MV64x60_CPU_ERR_CAUSE));
+	printk(KERN_ERR "\tCPU error register dump:\n");
+	printk(KERN_ERR "\tAddress low  0x%08x\n",
+	       mv64x60_read(&bh, MV64x60_CPU_ERR_ADDR_LO));
+	printk(KERN_ERR "\tAddress high 0x%08x\n",
+	       mv64x60_read(&bh, MV64x60_CPU_ERR_ADDR_HI));
+	printk(KERN_ERR "\tData low     0x%08x\n",
+	       mv64x60_read(&bh, MV64x60_CPU_ERR_DATA_LO));
+	printk(KERN_ERR "\tData high    0x%08x\n",
+	       mv64x60_read(&bh, MV64x60_CPU_ERR_DATA_HI));
+	printk(KERN_ERR "\tParity       0x%08x\n",
+	       mv64x60_read(&bh, MV64x60_CPU_ERR_PARITY));
+	mv64x60_write(&bh, MV64x60_CPU_ERR_CAUSE, 0);
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t
+gt64260_pci_error_int_handler(int irq, void *dev_id, struct pt_regs *regs)
+{
+	u32 val;
+	unsigned int pci_bus = (unsigned int)dev_id;
+
+	if (pci_bus == 0) {	/* Error on PCI 0 */
+		val = mv64x60_read(&bh, MV64x60_PCI0_ERR_CAUSE);
+		printk(KERN_ERR "%s: Error in PCI %d Interface\n",
+			"gt64260_pci_error_int_handler", pci_bus);
+		printk(KERN_ERR "\tPCI %d error register dump:\n", pci_bus);
+		printk(KERN_ERR "\tCause register 0x%08x\n", val);
+		printk(KERN_ERR "\tAddress Low    0x%08x\n",
+		       mv64x60_read(&bh, MV64x60_PCI0_ERR_ADDR_LO));
+		printk(KERN_ERR "\tAddress High   0x%08x\n",
+		       mv64x60_read(&bh, MV64x60_PCI0_ERR_ADDR_HI));
+		printk(KERN_ERR "\tAttribute      0x%08x\n",
+		       mv64x60_read(&bh, MV64x60_PCI0_ERR_DATA_LO));
+		printk(KERN_ERR "\tCommand        0x%08x\n",
+		       mv64x60_read(&bh, MV64x60_PCI0_ERR_CMD));
+		mv64x60_write(&bh, MV64x60_PCI0_ERR_CAUSE, ~val);
+	}
+	if (pci_bus == 1) {	/* Error on PCI 1 */
+		val = mv64x60_read(&bh, MV64x60_PCI1_ERR_CAUSE);
+		printk(KERN_ERR "%s: Error in PCI %d Interface\n",
+			"gt64260_pci_error_int_handler", pci_bus);
+		printk(KERN_ERR "\tPCI %d error register dump:\n", pci_bus);
+		printk(KERN_ERR "\tCause register 0x%08x\n", val);
+		printk(KERN_ERR "\tAddress Low    0x%08x\n",
+		       mv64x60_read(&bh, MV64x60_PCI1_ERR_ADDR_LO));
+		printk(KERN_ERR "\tAddress High   0x%08x\n",
+		       mv64x60_read(&bh, MV64x60_PCI1_ERR_ADDR_HI));
+		printk(KERN_ERR "\tAttribute      0x%08x\n",
+		       mv64x60_read(&bh, MV64x60_PCI1_ERR_DATA_LO));
+		printk(KERN_ERR "\tCommand        0x%08x\n",
+		       mv64x60_read(&bh, MV64x60_PCI1_ERR_CMD));
+		mv64x60_write(&bh, MV64x60_PCI1_ERR_CAUSE, ~val);
+	}
+	return IRQ_HANDLED;
+}
+
+static int __init
+gt64260_register_hdlrs(void)
+{
+	int rc;
+
+	/* Register CPU interface error interrupt handler */
+	if ((rc = request_irq(MV64x60_IRQ_CPU_ERR,
+		gt64260_cpu_error_int_handler, SA_INTERRUPT, CPU_INTR_STR, 0)))
+		printk(KERN_WARNING "Can't register cpu error handler: %d", rc);
+
+	mv64x60_write(&bh, MV64x60_CPU_ERR_MASK, 0);
+	mv64x60_write(&bh, MV64x60_CPU_ERR_MASK, 0x000000fe);
+
+	/* Register PCI 0 error interrupt handler */
+	if ((rc = request_irq(MV64360_IRQ_PCI0, gt64260_pci_error_int_handler,
+		    SA_INTERRUPT, PCI0_INTR_STR, (void *)0)))
+		printk(KERN_WARNING "Can't register pci 0 error handler: %d",
+			rc);
+
+	mv64x60_write(&bh, MV64x60_PCI0_ERR_MASK, 0);
+	mv64x60_write(&bh, MV64x60_PCI0_ERR_MASK, 0x003c0c24);
+
+	/* Register PCI 1 error interrupt handler */
+	if ((rc = request_irq(MV64360_IRQ_PCI1, gt64260_pci_error_int_handler,
+		    SA_INTERRUPT, PCI1_INTR_STR, (void *)1)))
+		printk(KERN_WARNING "Can't register pci 1 error handler: %d",
+			rc);
+
+	mv64x60_write(&bh, MV64x60_PCI1_ERR_MASK, 0);
+	mv64x60_write(&bh, MV64x60_PCI1_ERR_MASK, 0x003c0c24);
+
+	return 0;
+}
+
+arch_initcall(gt64260_register_hdlrs);
diff --git a/arch/ppc/syslib/harrier.c b/arch/ppc/syslib/harrier.c
new file mode 100644
index 000000000000..a6b3f8645793
--- /dev/null
+++ b/arch/ppc/syslib/harrier.c
@@ -0,0 +1,302 @@
+/*
+ * arch/ppc/syslib/harrier.c
+ *
+ * Motorola MCG Harrier northbridge/memory controller support
+ *
+ * Author: Dale Farnsworth
+ *         dale.farnsworth@mvista.com
+ *
+ * 2001 (c) MontaVista, Software, Inc.  This file is licensed under
+ * the terms of the GNU General Public License version 2.  This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/harrier_defs.h>
+
+#include <asm/byteorder.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/pci.h>
+#include <asm/pci-bridge.h>
+#include <asm/open_pic.h>
+#include <asm/harrier.h>
+
+/* define defaults for inbound windows */
+#define HARRIER_ITAT_DEFAULT		(HARRIER_ITAT_ENA | \
+					 HARRIER_ITAT_MEM | \
+					 HARRIER_ITAT_WPE | \
+					 HARRIER_ITAT_GBL)
+
+#define HARRIER_MPAT_DEFAULT		(HARRIER_ITAT_ENA | \
+					 HARRIER_ITAT_MEM | \
+					 HARRIER_ITAT_WPE | \
+					 HARRIER_ITAT_GBL)
+
+/*
+ * Initialize the inbound window size on a non-monarch harrier.
+ */
+void __init harrier_setup_nonmonarch(uint ppc_reg_base, uint in0_size)
+{
+	u16 temps;
+	u32 temp;
+
+	if (in0_size > HARRIER_ITSZ_2GB) {
+		printk
+		    ("harrier_setup_nonmonarch: Invalid window size code %d\n",
+		     in0_size);
+		return;
+	}
+
+	/* Clear the PCI memory enable bit. If we don't, then when the
+	 * inbound windows are enabled below, the corresponding BARs will be
+	 * "live" and start answering to PCI memory reads from their default
+	 * addresses (0x0), which overlap with system RAM.
+	 */
+	temps = in_le16((u16 *) (ppc_reg_base +
+				 HARRIER_XCSR_CONFIG(PCI_COMMAND)));
+	temps &= ~(PCI_COMMAND_MEMORY);
+	out_le16((u16 *) (ppc_reg_base + HARRIER_XCSR_CONFIG(PCI_COMMAND)),
+		 temps);
+
+	/* Setup a non-prefetchable inbound window */
+	out_le32((u32 *) (ppc_reg_base +
+			  HARRIER_XCSR_CONFIG(HARRIER_ITSZ0_OFF)), in0_size);
+
+	temp = in_le32((u32 *) (ppc_reg_base +
+				HARRIER_XCSR_CONFIG(HARRIER_ITAT0_OFF)));
+	temp &= ~HARRIER_ITAT_PRE;
+	temp |= HARRIER_ITAT_DEFAULT;
+	out_le32((u32 *) (ppc_reg_base +
+			  HARRIER_XCSR_CONFIG(HARRIER_ITAT0_OFF)), temp);
+
+	/* Enable the message passing block */
+	temp = in_le32((u32 *) (ppc_reg_base +
+				HARRIER_XCSR_CONFIG(HARRIER_MPAT_OFF)));
+	temp |= HARRIER_MPAT_DEFAULT;
+	out_le32((u32 *) (ppc_reg_base +
+			  HARRIER_XCSR_CONFIG(HARRIER_MPAT_OFF)), temp);
+}
+
+void __init harrier_release_eready(uint ppc_reg_base)
+{
+	ulong temp;
+
+	/*
+	 * Set EREADY to allow the line to be pulled up after everyone is
+	 * ready.
+	 */
+	temp = in_be32((uint *) (ppc_reg_base + HARRIER_MISC_CSR_OFF));
+	temp |= HARRIER_EREADY;
+	out_be32((uint *) (ppc_reg_base + HARRIER_MISC_CSR_OFF), temp);
+}
+
+void __init harrier_wait_eready(uint ppc_reg_base)
+{
+	ulong temp;
+
+	/*
+	 * Poll the ERDYS line until it goes high to indicate that all
+	 * non-monarch PrPMCs are ready for bus enumeration (or that there are
+	 * no PrPMCs present).
+	 */
+
+	/* FIXME: Add a timeout of some kind to prevent endless waits. */
+	do {
+
+		temp = in_be32((uint *) (ppc_reg_base + HARRIER_MISC_CSR_OFF));
+
+	} while (!(temp & HARRIER_ERDYS));
+}
+
+/*
+ * Initialize the Motorola MCG Harrier host bridge.
+ *
+ * This means setting up the PPC bus to PCI memory and I/O space mappings,
+ * setting the PCI memory space address of the MPIC (mapped straight
+ * through), and ioremap'ing the mpic registers.
+ * 'OpenPIC_Addr' will be set correctly by this routine.
+ * This routine will not change the PCI_CONFIG_ADDR or PCI_CONFIG_DATA
+ * addresses and assumes that the mapping of PCI memory space back to system
+ * memory is set up correctly by PPCBug.
+ */
+int __init
+harrier_init(struct pci_controller *hose,
+	     uint ppc_reg_base,
+	     ulong processor_pci_mem_start,
+	     ulong processor_pci_mem_end,
+	     ulong processor_pci_io_start,
+	     ulong processor_pci_io_end, ulong processor_mpic_base)
+{
+	uint addr, offset;
+
+	/*
+	 * Some sanity checks...
+	 */
+	if (((processor_pci_mem_start & 0xffff0000) != processor_pci_mem_start)
+	    || ((processor_pci_io_start & 0xffff0000) !=
+		processor_pci_io_start)) {
+		printk("harrier_init: %s\n",
+		       "PPC to PCI mappings must start on 64 KB boundaries");
+		return -1;
+	}
+
+	if (((processor_pci_mem_end & 0x0000ffff) != 0x0000ffff) ||
+	    ((processor_pci_io_end & 0x0000ffff) != 0x0000ffff)) {
+		printk("harrier_init: PPC to PCI mappings %s\n",
+		       "must end just before a 64 KB boundaries");
+		return -1;
+	}
+
+	if (((processor_pci_mem_end - processor_pci_mem_start) !=
+	     (hose->mem_space.end - hose->mem_space.start)) ||
+	    ((processor_pci_io_end - processor_pci_io_start) !=
+	     (hose->io_space.end - hose->io_space.start))) {
+		printk("harrier_init: %s\n",
+		       "PPC and PCI memory or I/O space sizes don't match");
+		return -1;
+	}
+
+	if ((processor_mpic_base & 0xfffc0000) != processor_mpic_base) {
+		printk("harrier_init: %s\n",
+		       "MPIC address must start on 256 KB boundary");
+		return -1;
+	}
+
+	if ((pci_dram_offset & 0xffff0000) != pci_dram_offset) {
+		printk("harrier_init: %s\n",
+		       "pci_dram_offset must be multiple of 64 KB");
+		return -1;
+	}
+
+	/*
+	 * Program the OTAD/OTOF registers to set up the PCI Mem & I/O
+	 * space mappings.  These are the mappings going from the processor to
+	 * the PCI bus.
+	 *
+	 * Note: Don't need to 'AND' start/end addresses with 0xffff0000
+	 *       because sanity check above ensures that they are properly
+	 *       aligned.
+	 */
+
+	/* Set up PPC->PCI Mem mapping */
+	addr = processor_pci_mem_start | (processor_pci_mem_end >> 16);
+#ifdef CONFIG_HARRIER_STORE_GATHERING
+	offset = (hose->mem_space.start - processor_pci_mem_start) | 0x9a;
+#else
+	offset = (hose->mem_space.start - processor_pci_mem_start) | 0x92;
+#endif
+	out_be32((uint *) (ppc_reg_base + HARRIER_OTAD0_OFF), addr);
+	out_be32((uint *) (ppc_reg_base + HARRIER_OTOF0_OFF), offset);
+
+	/* Set up PPC->PCI I/O mapping -- Contiguous I/O space */
+	addr = processor_pci_io_start | (processor_pci_io_end >> 16);
+	offset = (hose->io_space.start - processor_pci_io_start) | 0x80;
+	out_be32((uint *) (ppc_reg_base + HARRIER_OTAD1_OFF), addr);
+	out_be32((uint *) (ppc_reg_base + HARRIER_OTOF1_OFF), offset);
+
+	/* Enable MPIC */
+	OpenPIC_Addr = (void *)processor_mpic_base;
+	addr = (processor_mpic_base >> 16) | 1;
+	out_be16((ushort *) (ppc_reg_base + HARRIER_MBAR_OFF), addr);
+	out_8((u_char *) (ppc_reg_base + HARRIER_MPIC_CSR_OFF),
+	      HARRIER_MPIC_OPI_ENABLE);
+
+	return 0;
+}
+
+/*
+ * Find the amount of RAM present.
+ * This assumes that PPCBug has initialized the memory controller (SMC)
+ * on the Harrier correctly (i.e., it does no sanity checking).
+ * It also assumes that the memory base registers are set to configure the
+ * memory as contigous starting with "RAM A BASE", "RAM B BASE", etc.
+ * however, RAM base registers can be skipped (e.g. A, B, C are set,
+ * D is skipped but E is set is okay).
+ */
+#define	MB	(1024*1024UL)
+
+static uint harrier_size_table[] __initdata = {
+	0 * MB,			/* 0 ==>    0 MB */
+	32 * MB,		/* 1 ==>   32 MB */
+	64 * MB,		/* 2 ==>   64 MB */
+	64 * MB,		/* 3 ==>   64 MB */
+	128 * MB,		/* 4 ==>  128 MB */
+	128 * MB,		/* 5 ==>  128 MB */
+	128 * MB,		/* 6 ==>  128 MB */
+	256 * MB,		/* 7 ==>  256 MB */
+	256 * MB,		/* 8 ==>  256 MB */
+	256 * MB,		/* 9 ==>  256 MB */
+	512 * MB,		/* a ==>  512 MB */
+	512 * MB,		/* b ==>  512 MB */
+	512 * MB,		/* c ==>  512 MB */
+	1024 * MB,		/* d ==> 1024 MB */
+	1024 * MB,		/* e ==> 1024 MB */
+	2048 * MB,		/* f ==> 2048 MB */
+};
+
+/*
+ * *** WARNING: You MUST have a BAT set up to map in the XCSR regs ***
+ *
+ * Read the memory controller's registers to determine the amount of system
+ * memory.  Assumes that the memory controller registers are already mapped
+ * into virtual memory--too early to use ioremap().
+ */
+unsigned long __init harrier_get_mem_size(uint xcsr_base)
+{
+	ulong last_addr;
+	int i;
+	uint vend_dev_id;
+	uint *size_table;
+	uint val;
+	uint *csrp;
+	uint size;
+	int size_table_entries;
+
+	vend_dev_id = in_be32((uint *) xcsr_base + PCI_VENDOR_ID);
+
+	if (((vend_dev_id & 0xffff0000) >> 16) != PCI_VENDOR_ID_MOTOROLA) {
+		printk("harrier_get_mem_size: %s (0x%x)\n",
+		       "Not a Motorola Memory Controller", vend_dev_id);
+		return 0;
+	}
+
+	vend_dev_id &= 0x0000ffff;
+
+	if (vend_dev_id == PCI_DEVICE_ID_MOTOROLA_HARRIER) {
+		size_table = harrier_size_table;
+		size_table_entries = sizeof(harrier_size_table) /
+		    sizeof(harrier_size_table[0]);
+	} else {
+		printk("harrier_get_mem_size: %s (0x%x)\n",
+		       "Not a Harrier", vend_dev_id);
+		return 0;
+	}
+
+	last_addr = 0;
+
+	csrp = (uint *) (xcsr_base + HARRIER_SDBA_OFF);
+	for (i = 0; i < 8; i++) {
+		val = in_be32(csrp++);
+
+		if (val & 0x100) {	/* If enabled */
+			size = val >> HARRIER_SDB_SIZE_SHIFT;
+			size &= HARRIER_SDB_SIZE_MASK;
+			if (size >= size_table_entries) {
+				break;	/* Register not set correctly */
+			}
+			size = size_table[size];
+
+			val &= ~(size - 1);
+			val += size;
+
+			if (val > last_addr) {
+				last_addr = val;
+			}
+		}
+	}
+
+	return last_addr;
+}
diff --git a/arch/ppc/syslib/hawk_common.c b/arch/ppc/syslib/hawk_common.c
new file mode 100644
index 000000000000..a9911dc3a82f
--- /dev/null
+++ b/arch/ppc/syslib/hawk_common.c
@@ -0,0 +1,319 @@
+/*
+ * arch/ppc/syslib/hawk_common.c
+ *
+ * Common Motorola PowerPlus Platform--really Falcon/Raven or HAWK.
+ *
+ * Author: Mark A. Greer
+ *         mgreer@mvista.com
+ *
+ * 2001 (c) MontaVista, Software, Inc.  This file is licensed under
+ * the terms of the GNU General Public License version 2.  This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+
+#include <asm/byteorder.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/pci.h>
+#include <asm/pci-bridge.h>
+#include <asm/open_pic.h>
+#include <asm/hawk.h>
+
+/*
+ * The Falcon/Raven and HAWK has 4 sets of registers:
+ *   1) PPC Registers which define the mappings from PPC bus to PCI bus,
+ *      etc.
+ *   2) PCI Registers which define the mappings from PCI bus to PPC bus and the
+ *      MPIC base address.
+ *   3) MPIC registers.
+ *   4) System Memory Controller (SMC) registers.
+ */
+
+/*
+ * Initialize the Motorola MCG Raven or HAWK host bridge.
+ *
+ * This means setting up the PPC bus to PCI memory and I/O space mappings,
+ * setting the PCI memory space address of the MPIC (mapped straight
+ * through), and ioremap'ing the mpic registers.
+ * This routine will set the PCI_CONFIG_ADDR or PCI_CONFIG_DATA
+ * addresses based on the PCI I/O address that is passed in.
+ * 'OpenPIC_Addr' will be set correctly by this routine.
+ */
+int __init
+hawk_init(struct pci_controller *hose,
+	     uint ppc_reg_base,
+	     ulong processor_pci_mem_start,
+	     ulong processor_pci_mem_end,
+	     ulong processor_pci_io_start,
+	     ulong processor_pci_io_end,
+	     ulong processor_mpic_base)
+{
+	uint		addr, offset;
+
+	/*
+	 * Some sanity checks...
+	 */
+	if (((processor_pci_mem_start&0xffff0000) != processor_pci_mem_start) ||
+	    ((processor_pci_io_start &0xffff0000) != processor_pci_io_start)) {
+		printk("hawk_init: %s\n",
+			"PPC to PCI mappings must start on 64 KB boundaries");
+		return -1;
+	}
+
+	if (((processor_pci_mem_end  &0x0000ffff) != 0x0000ffff) ||
+	    ((processor_pci_io_end   &0x0000ffff) != 0x0000ffff)) {
+		printk("hawk_init: PPC to PCI mappings %s\n",
+			"must end just before a 64 KB boundaries");
+		return -1;
+	}
+
+	if (((processor_pci_mem_end - processor_pci_mem_start) !=
+	     (hose->mem_space.end - hose->mem_space.start)) ||
+	    ((processor_pci_io_end - processor_pci_io_start) !=
+	     (hose->io_space.end - hose->io_space.start))) {
+		printk("hawk_init: %s\n",
+			"PPC and PCI memory or I/O space sizes don't match");
+		return -1;
+	}
+
+	if ((processor_mpic_base & 0xfffc0000) != processor_mpic_base) {
+		printk("hawk_init: %s\n",
+			"MPIC address must start on 256 MB boundary");
+		return -1;
+	}
+
+	if ((pci_dram_offset & 0xffff0000) != pci_dram_offset) {
+		printk("hawk_init: %s\n",
+			"pci_dram_offset must be multiple of 64 KB");
+		return -1;
+	}
+
+	/*
+	 * Disable previous PPC->PCI mappings.
+	 */
+	out_be32((uint *)(ppc_reg_base + HAWK_PPC_XSOFF0_OFF), 0x00000000);
+	out_be32((uint *)(ppc_reg_base + HAWK_PPC_XSOFF1_OFF), 0x00000000);
+	out_be32((uint *)(ppc_reg_base + HAWK_PPC_XSOFF2_OFF), 0x00000000);
+	out_be32((uint *)(ppc_reg_base + HAWK_PPC_XSOFF3_OFF), 0x00000000);
+
+	/*
+	 * Program the XSADD/XSOFF registers to set up the PCI Mem & I/O
+	 * space mappings.  These are the mappings going from the processor to
+	 * the PCI bus.
+	 *
+	 * Note: Don't need to 'AND' start/end addresses with 0xffff0000
+	 *	 because sanity check above ensures that they are properly
+	 *	 aligned.
+	 */
+
+	/* Set up PPC->PCI Mem mapping */
+	addr = processor_pci_mem_start | (processor_pci_mem_end >> 16);
+	offset = (hose->mem_space.start - processor_pci_mem_start) | 0xd2;
+	out_be32((uint *)(ppc_reg_base + HAWK_PPC_XSADD0_OFF), addr);
+	out_be32((uint *)(ppc_reg_base + HAWK_PPC_XSOFF0_OFF), offset);
+
+	/* Set up PPC->MPIC mapping on the bridge */
+	addr = processor_mpic_base |
+	        (((processor_mpic_base + HAWK_MPIC_SIZE) >> 16) - 1);
+	/* No write posting for this PCI Mem space */
+	offset = (hose->mem_space.start - processor_pci_mem_start) | 0xc2;
+
+	out_be32((uint *)(ppc_reg_base + HAWK_PPC_XSADD1_OFF), addr);
+	out_be32((uint *)(ppc_reg_base + HAWK_PPC_XSOFF1_OFF), offset);
+
+	/* Set up PPC->PCI I/O mapping -- Contiguous I/O space */
+	addr = processor_pci_io_start | (processor_pci_io_end >> 16);
+	offset = (hose->io_space.start - processor_pci_io_start) | 0xc0;
+	out_be32((uint *)(ppc_reg_base + HAWK_PPC_XSADD3_OFF), addr);
+	out_be32((uint *)(ppc_reg_base + HAWK_PPC_XSOFF3_OFF), offset);
+
+	hose->io_base_virt = (void *)ioremap(processor_pci_io_start,
+			(processor_pci_io_end - processor_pci_io_start + 1));
+
+	/*
+	 * Set up the indirect method of accessing PCI config space.
+	 * The PCI config addr/data pair based on start addr of PCI I/O space.
+	 */
+	setup_indirect_pci(hose,
+			   processor_pci_io_start + HAWK_PCI_CONFIG_ADDR_OFF,
+			   processor_pci_io_start + HAWK_PCI_CONFIG_DATA_OFF);
+
+	/*
+	 * Disable previous PCI->PPC mappings.
+	 */
+
+	/* XXXX Put in mappings from PCI bus to processor bus XXXX */
+
+	/*
+	 * Disable MPIC response to PCI I/O space (BAR 0).
+	 * Make MPIC respond to PCI Mem space at specified address.
+	 * (BAR 1).
+	 */
+	early_write_config_dword(hose,
+			         0,
+			         PCI_DEVFN(0,0),
+			         PCI_BASE_ADDRESS_0,
+			         0x00000000 | 0x1);
+
+	early_write_config_dword(hose,
+			         0,
+			         PCI_DEVFN(0,0),
+			         PCI_BASE_ADDRESS_1,
+			         (processor_mpic_base -
+				 processor_pci_mem_start + 
+				 hose->mem_space.start) | 0x0);
+
+	/* Map MPIC into vitual memory */
+	OpenPIC_Addr = ioremap(processor_mpic_base, HAWK_MPIC_SIZE);
+
+	return 0;
+}
+
+/*
+ * Find the amount of RAM present.
+ * This assumes that PPCBug has initialized the memory controller (SMC)
+ * on the Falcon/HAWK correctly (i.e., it does no sanity checking).
+ * It also assumes that the memory base registers are set to configure the
+ * memory as contigous starting with "RAM A BASE", "RAM B BASE", etc.
+ * however, RAM base registers can be skipped (e.g. A, B, C are set,
+ * D is skipped but E is set is okay).
+ */
+#define	MB	(1024*1024)
+
+static uint reg_offset_table[] __initdata = {
+	HAWK_SMC_RAM_A_SIZE_REG_OFF,
+	HAWK_SMC_RAM_B_SIZE_REG_OFF,
+	HAWK_SMC_RAM_C_SIZE_REG_OFF,
+	HAWK_SMC_RAM_D_SIZE_REG_OFF,
+	HAWK_SMC_RAM_E_SIZE_REG_OFF,
+	HAWK_SMC_RAM_F_SIZE_REG_OFF,
+	HAWK_SMC_RAM_G_SIZE_REG_OFF,
+	HAWK_SMC_RAM_H_SIZE_REG_OFF
+};
+
+static uint falcon_size_table[] __initdata = {
+	   0 * MB, /* 0 ==>    0 MB */
+	  16 * MB, /* 1 ==>   16 MB */
+	  32 * MB, /* 2 ==>   32 MB */
+	  64 * MB, /* 3 ==>   64 MB */
+	 128 * MB, /* 4 ==>  128 MB */
+	 256 * MB, /* 5 ==>  256 MB */
+        1024 * MB, /* 6 ==> 1024 MB (1 GB) */
+};
+
+static uint hawk_size_table[] __initdata = {
+	  0 * MB, /* 0 ==>    0 MB */
+	 32 * MB, /* 1 ==>   32 MB */
+	 64 * MB, /* 2 ==>   64 MB */
+	 64 * MB, /* 3 ==>   64 MB */
+	128 * MB, /* 4 ==>  128 MB */
+	128 * MB, /* 5 ==>  128 MB */
+	128 * MB, /* 6 ==>  128 MB */
+	256 * MB, /* 7 ==>  256 MB */
+	256 * MB, /* 8 ==>  256 MB */
+	512 * MB, /* 9 ==>  512 MB */
+};
+
+/*
+ * *** WARNING: You MUST have a BAT set up to map in the SMC regs ***
+ *
+ * Read the memory controller's registers to determine the amount of system
+ * memory.  Assumes that the memory controller registers are already mapped
+ * into virtual memory--too early to use ioremap().
+ */
+unsigned long __init
+hawk_get_mem_size(uint smc_base)
+{
+	unsigned long	total;
+	int		i, size_table_entries, reg_limit;
+	uint		vend_dev_id;
+	uint		*size_table;
+	u_char		val;
+
+
+	vend_dev_id = in_be32((uint *)smc_base + PCI_VENDOR_ID);
+
+	if (((vend_dev_id & 0xffff0000) >> 16) != PCI_VENDOR_ID_MOTOROLA) {
+		printk("hawk_get_mem_size: %s (0x%x)\n",
+			"Not a Motorola Memory Controller", vend_dev_id);
+		return 0;
+	}
+
+	vend_dev_id &= 0x0000ffff;
+
+	if (vend_dev_id == PCI_DEVICE_ID_MOTOROLA_FALCON) {
+		size_table = falcon_size_table;
+		size_table_entries = sizeof(falcon_size_table) /
+				     sizeof(falcon_size_table[0]);
+
+		reg_limit = FALCON_SMC_REG_COUNT;
+	}
+	else if (vend_dev_id == PCI_DEVICE_ID_MOTOROLA_HAWK) {
+		size_table = hawk_size_table;
+		size_table_entries = sizeof(hawk_size_table) /
+				     sizeof(hawk_size_table[0]);
+		reg_limit = HAWK_SMC_REG_COUNT;
+	}
+	else {
+		printk("hawk_get_mem_size: %s (0x%x)\n",
+			"Not a Falcon or HAWK", vend_dev_id);
+		return 0;
+	}
+
+	total = 0;
+
+	/* Check every reg because PPCBug may skip some */
+	for (i=0; i<reg_limit; i++) {
+		val = in_8((u_char *)(smc_base + reg_offset_table[i]));
+
+		if (val & 0x80) {	/* If enabled */
+			val &= 0x0f;
+
+			/* Don't go past end of size_table */
+			if (val < size_table_entries) {
+				total += size_table[val];
+			}
+			else {	/* Register not set correctly */
+				break;
+			}
+		}
+	}
+
+	return total;
+}
+
+int __init
+hawk_mpic_init(unsigned int pci_mem_offset)
+{
+	unsigned short	devid;
+	unsigned int	pci_membase;
+
+	/* Check the first PCI device to see if it is a Raven or Hawk. */
+	early_read_config_word(0, 0, 0, PCI_DEVICE_ID, &devid);
+
+	switch (devid) {
+	case PCI_DEVICE_ID_MOTOROLA_RAVEN:
+	case PCI_DEVICE_ID_MOTOROLA_HAWK:
+		break;
+	default:
+		OpenPIC_Addr = NULL;
+		return 1;
+	}
+
+	/* Read the memory base register. */
+	early_read_config_dword(0, 0, 0, PCI_BASE_ADDRESS_1, &pci_membase);
+
+	if (pci_membase == 0) {
+		OpenPIC_Addr = NULL;
+		return 1;
+	}
+
+	/* Map the MPIC registers to virtual memory. */
+	OpenPIC_Addr = ioremap(pci_membase + pci_mem_offset, 0x22000);
+
+	return 0;
+}
diff --git a/arch/ppc/syslib/i8259.c b/arch/ppc/syslib/i8259.c
new file mode 100644
index 000000000000..b9391e650141
--- /dev/null
+++ b/arch/ppc/syslib/i8259.c
@@ -0,0 +1,211 @@
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/interrupt.h>
+#include <asm/io.h>
+#include <asm/i8259.h>
+
+static volatile unsigned char *pci_intack; /* RO, gives us the irq vector */
+
+unsigned char cached_8259[2] = { 0xff, 0xff };
+#define cached_A1 (cached_8259[0])
+#define cached_21 (cached_8259[1])
+
+static DEFINE_SPINLOCK(i8259_lock);
+
+int i8259_pic_irq_offset;
+
+/*
+ * Acknowledge the IRQ using either the PCI host bridge's interrupt
+ * acknowledge feature or poll.  How i8259_init() is called determines
+ * which is called.  It should be noted that polling is broken on some
+ * IBM and Motorola PReP boxes so we must use the int-ack feature on them.
+ */
+int
+i8259_irq(struct pt_regs *regs)
+{
+	int irq;
+
+	spin_lock(&i8259_lock);
+
+	/* Either int-ack or poll for the IRQ */
+	if (pci_intack)
+		irq = *pci_intack;
+	else {
+		/* Perform an interrupt acknowledge cycle on controller 1. */
+		outb(0x0C, 0x20);		/* prepare for poll */
+		irq = inb(0x20) & 7;
+		if (irq == 2 ) {
+			/*
+			 * Interrupt is cascaded so perform interrupt
+			 * acknowledge on controller 2.
+			 */
+			outb(0x0C, 0xA0);	/* prepare for poll */
+			irq = (inb(0xA0) & 7) + 8;
+		}
+	}
+
+	if (irq == 7) {
+		/*
+		 * This may be a spurious interrupt.
+		 *
+		 * Read the interrupt status register (ISR). If the most
+		 * significant bit is not set then there is no valid
+		 * interrupt.
+		 */
+		if (!pci_intack)
+			outb(0x0B, 0x20);	/* ISR register */
+		if(~inb(0x20) & 0x80)
+			irq = -1;
+	}
+
+	spin_unlock(&i8259_lock);
+	return irq;
+}
+
+static void i8259_mask_and_ack_irq(unsigned int irq_nr)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&i8259_lock, flags);
+	if ( irq_nr >= i8259_pic_irq_offset )
+		irq_nr -= i8259_pic_irq_offset;
+
+	if (irq_nr > 7) {
+		cached_A1 |= 1 << (irq_nr-8);
+		inb(0xA1); /* DUMMY */
+		outb(cached_A1,0xA1);
+		outb(0x20,0xA0); /* Non-specific EOI */
+		outb(0x20,0x20); /* Non-specific EOI to cascade */
+	} else {
+		cached_21 |= 1 << irq_nr;
+		inb(0x21); /* DUMMY */
+		outb(cached_21,0x21);
+		outb(0x20,0x20); /* Non-specific EOI */
+	}
+	spin_unlock_irqrestore(&i8259_lock, flags);
+}
+
+static void i8259_set_irq_mask(int irq_nr)
+{
+	outb(cached_A1,0xA1);
+	outb(cached_21,0x21);
+}
+
+static void i8259_mask_irq(unsigned int irq_nr)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&i8259_lock, flags);
+	if ( irq_nr >= i8259_pic_irq_offset )
+		irq_nr -= i8259_pic_irq_offset;
+	if ( irq_nr < 8 )
+		cached_21 |= 1 << irq_nr;
+	else
+		cached_A1 |= 1 << (irq_nr-8);
+	i8259_set_irq_mask(irq_nr);
+	spin_unlock_irqrestore(&i8259_lock, flags);
+}
+
+static void i8259_unmask_irq(unsigned int irq_nr)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&i8259_lock, flags);
+	if ( irq_nr >= i8259_pic_irq_offset )
+		irq_nr -= i8259_pic_irq_offset;
+	if ( irq_nr < 8 )
+		cached_21 &= ~(1 << irq_nr);
+	else
+		cached_A1 &= ~(1 << (irq_nr-8));
+	i8259_set_irq_mask(irq_nr);
+	spin_unlock_irqrestore(&i8259_lock, flags);
+}
+
+static void i8259_end_irq(unsigned int irq)
+{
+	if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))
+	    && irq_desc[irq].action)
+		i8259_unmask_irq(irq);
+}
+
+struct hw_interrupt_type i8259_pic = {
+	" i8259    ",
+	NULL,
+	NULL,
+	i8259_unmask_irq,
+	i8259_mask_irq,
+	i8259_mask_and_ack_irq,
+	i8259_end_irq,
+	NULL
+};
+
+static struct resource pic1_iores = {
+	.name = "8259 (master)",
+	.start = 0x20,
+	.end = 0x21,
+	.flags = IORESOURCE_BUSY,
+};
+
+static struct resource pic2_iores = {
+	.name = "8259 (slave)",
+	.start = 0xa0,
+	.end = 0xa1,
+	.flags = IORESOURCE_BUSY,
+};
+
+static struct resource pic_edgectrl_iores = {
+	.name = "8259 edge control",
+	.start = 0x4d0,
+	.end = 0x4d1,
+	.flags = IORESOURCE_BUSY,
+};
+
+static struct irqaction i8259_irqaction = {
+	.handler = no_action,
+	.flags = SA_INTERRUPT,
+	.mask = CPU_MASK_NONE,
+	.name = "82c59 secondary cascade",
+};
+
+/*
+ * i8259_init()
+ * intack_addr - PCI interrupt acknowledge (real) address which will return
+ *               the active irq from the 8259
+ */
+void __init
+i8259_init(long intack_addr)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&i8259_lock, flags);
+	/* init master interrupt controller */
+	outb(0x11, 0x20); /* Start init sequence */
+	outb(0x00, 0x21); /* Vector base */
+	outb(0x04, 0x21); /* edge tiggered, Cascade (slave) on IRQ2 */
+	outb(0x01, 0x21); /* Select 8086 mode */
+
+	/* init slave interrupt controller */
+	outb(0x11, 0xA0); /* Start init sequence */
+	outb(0x08, 0xA1); /* Vector base */
+	outb(0x02, 0xA1); /* edge triggered, Cascade (slave) on IRQ2 */
+	outb(0x01, 0xA1); /* Select 8086 mode */
+
+	/* always read ISR */
+	outb(0x0B, 0x20);
+	outb(0x0B, 0xA0);
+
+	/* Mask all interrupts */
+	outb(cached_A1, 0xA1);
+	outb(cached_21, 0x21);
+
+	spin_unlock_irqrestore(&i8259_lock, flags);
+
+	/* reserve our resources */
+	setup_irq( i8259_pic_irq_offset + 2, &i8259_irqaction);
+	request_resource(&ioport_resource, &pic1_iores);
+	request_resource(&ioport_resource, &pic2_iores);
+	request_resource(&ioport_resource, &pic_edgectrl_iores);
+
+	if (intack_addr != 0)
+		pci_intack = ioremap(intack_addr, 1);
+}
diff --git a/arch/ppc/syslib/ibm440gp_common.c b/arch/ppc/syslib/ibm440gp_common.c
new file mode 100644
index 000000000000..0d6be2d6dd67
--- /dev/null
+++ b/arch/ppc/syslib/ibm440gp_common.c
@@ -0,0 +1,76 @@
+/*
+ * arch/ppc/syslib/ibm440gp_common.c
+ *
+ * PPC440GP system library
+ *
+ * Matt Porter <mporter@mvista.com>
+ * Copyright 2002-2003 MontaVista Software Inc.
+ *
+ * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
+ * Copyright (c) 2003 Zultys Technologies
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+#include <linux/config.h>
+#include <linux/types.h>
+#include <asm/reg.h>
+#include <asm/ibm44x.h>
+#include <asm/mmu.h>
+
+/*
+ * Calculate 440GP clocks
+ */
+void __init ibm440gp_get_clocks(struct ibm44x_clocks* p,
+				unsigned int sys_clk,
+				unsigned int ser_clk)
+{
+	u32 cpc0_sys0 = mfdcr(DCRN_CPC0_SYS0);
+	u32 cpc0_cr0 = mfdcr(DCRN_CPC0_CR0);
+	u32 opdv = ((cpc0_sys0 >> 10) & 0x3) + 1;
+	u32 epdv = ((cpc0_sys0 >> 8) & 0x3) + 1;
+
+	if (cpc0_sys0 & 0x2){
+		/* Bypass system PLL */
+		p->cpu = p->plb = sys_clk;
+	}
+	else {
+		u32 fbdv, fwdva, fwdvb, m, vco;
+
+		fbdv = (cpc0_sys0 >> 18) & 0x0f;
+		if (!fbdv)
+			fbdv = 16;
+
+		fwdva = 8 - ((cpc0_sys0 >> 15) & 0x7);
+		fwdvb = 8 - ((cpc0_sys0 >> 12) & 0x7);
+
+    		/* Feedback path */	
+		if (cpc0_sys0 & 0x00000080){
+			/* PerClk */
+			m = fwdvb * opdv * epdv;
+		}
+		else {
+			/* CPU clock */
+			m = fbdv * fwdva;
+    		}
+		vco = sys_clk * m;
+		p->cpu = vco / fwdva;
+		p->plb = vco / fwdvb;
+	}
+
+	p->opb = p->plb / opdv;
+	p->ebc = p->opb / epdv;
+
+	if (cpc0_cr0 & 0x00400000){
+		/* External UART clock */
+		p->uart0 = p->uart1 = ser_clk;
+	}
+	else {
+		/* Internal UART clock */
+    		u32 uart_div = ((cpc0_cr0 >> 16) & 0x1f) + 1;
+		p->uart0 = p->uart1 = p->plb / uart_div;
+	}
+}
diff --git a/arch/ppc/syslib/ibm440gp_common.h b/arch/ppc/syslib/ibm440gp_common.h
new file mode 100644
index 000000000000..a054d83cb1ac
--- /dev/null
+++ b/arch/ppc/syslib/ibm440gp_common.h
@@ -0,0 +1,35 @@
+/*
+ * arch/ppc/kernel/ibm440gp_common.h
+ *
+ * PPC440GP system library
+ *
+ * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
+ * Copyright (c) 2003 Zultys Technologies
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+#ifdef __KERNEL__
+#ifndef __PPC_SYSLIB_IBM440GP_COMMON_H
+#define __PPC_SYSLIB_IBM440GP_COMMON_H
+
+#ifndef __ASSEMBLY__
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <syslib/ibm44x_common.h>
+
+/*
+ * Please, refer to the Figure 13.1 in 440GP user manual
+ *
+ * if internal UART clock is used, ser_clk is ignored
+ */
+void ibm440gp_get_clocks(struct ibm44x_clocks*, unsigned int sys_clk,
+	unsigned int ser_clk) __init;
+
+#endif /* __ASSEMBLY__ */
+#endif /* __PPC_SYSLIB_IBM440GP_COMMON_H */
+#endif /* __KERNEL__ */
diff --git a/arch/ppc/syslib/ibm440gx_common.c b/arch/ppc/syslib/ibm440gx_common.c
new file mode 100644
index 000000000000..4ad85e0e0234
--- /dev/null
+++ b/arch/ppc/syslib/ibm440gx_common.c
@@ -0,0 +1,270 @@
+/*
+ * arch/ppc/kernel/ibm440gx_common.c
+ *
+ * PPC440GX system library
+ *
+ * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
+ * Copyright (c) 2003, 2004 Zultys Technologies
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <asm/ibm44x.h>
+#include <asm/mmu.h>
+#include <asm/processor.h>
+#include <syslib/ibm440gx_common.h>
+
+/*
+ * Calculate 440GX clocks
+ */
+static inline u32 __fix_zero(u32 v, u32 def){
+	return v ? v : def;
+}
+
+void __init ibm440gx_get_clocks(struct ibm44x_clocks* p, unsigned int sys_clk,
+	unsigned int ser_clk)
+{
+	u32 pllc  = CPR_READ(DCRN_CPR_PLLC);
+	u32 plld  = CPR_READ(DCRN_CPR_PLLD);
+	u32 uart0 = SDR_READ(DCRN_SDR_UART0);
+	u32 uart1 = SDR_READ(DCRN_SDR_UART1);
+
+	/* Dividers */
+	u32 fbdv   = __fix_zero((plld >> 24) & 0x1f, 32);
+	u32 fwdva  = __fix_zero((plld >> 16) & 0xf, 16);
+	u32 fwdvb  = __fix_zero((plld >> 8) & 7, 8);
+	u32 lfbdv  = __fix_zero(plld & 0x3f, 64);
+	u32 pradv0 = __fix_zero((CPR_READ(DCRN_CPR_PRIMAD) >> 24) & 7, 8);
+	u32 prbdv0 = __fix_zero((CPR_READ(DCRN_CPR_PRIMBD) >> 24) & 7, 8);
+	u32 opbdv0 = __fix_zero((CPR_READ(DCRN_CPR_OPBD) >> 24) & 3, 4);
+	u32 perdv0 = __fix_zero((CPR_READ(DCRN_CPR_PERD) >> 24) & 3, 4);
+
+	/* Input clocks for primary dividers */
+	u32 clk_a, clk_b;
+
+	if (pllc & 0x40000000){
+		u32 m;
+
+		/* Feedback path */
+		switch ((pllc >> 24) & 7){
+		case 0:
+			/* PLLOUTx */
+			m = ((pllc & 0x20000000) ? fwdvb : fwdva) * lfbdv;
+			break;
+		case 1:
+			/* CPU */
+			m = fwdva * pradv0;
+			break;
+		case 5:
+			/* PERClk */
+			m = fwdvb * prbdv0 * opbdv0 * perdv0;
+			break;
+		default:
+			printk(KERN_EMERG "invalid PLL feedback source\n");
+			goto bypass;
+		}
+		m *= fbdv;
+		p->vco = sys_clk * m;
+		clk_a = p->vco / fwdva;
+		clk_b = p->vco / fwdvb;
+	}
+	else {
+bypass:
+		/* Bypass system PLL */
+		p->vco = 0;
+		clk_a = clk_b = sys_clk;
+	}
+
+	p->cpu = clk_a / pradv0;
+	p->plb = clk_b / prbdv0;
+	p->opb = p->plb / opbdv0;
+	p->ebc = p->opb / perdv0;
+
+	/* UARTs clock */
+	if (uart0 & 0x00800000)
+		p->uart0 = ser_clk;
+	else
+		p->uart0 = p->plb / __fix_zero(uart0 & 0xff, 256);
+
+	if (uart1 & 0x00800000)
+		p->uart1 = ser_clk;
+	else
+		p->uart1 = p->plb / __fix_zero(uart1 & 0xff, 256);
+}
+
+/* Issue L2C diagnostic command */
+static inline u32 l2c_diag(u32 addr)
+{
+	mtdcr(DCRN_L2C0_ADDR, addr);
+	mtdcr(DCRN_L2C0_CMD, L2C_CMD_DIAG);
+	while (!(mfdcr(DCRN_L2C0_SR) & L2C_SR_CC)) ;
+	return mfdcr(DCRN_L2C0_DATA);
+}
+
+static irqreturn_t l2c_error_handler(int irq, void* dev, struct pt_regs* regs)
+{
+	u32 sr = mfdcr(DCRN_L2C0_SR);
+	if (sr & L2C_SR_CPE){
+		/* Read cache trapped address */
+		u32 addr = l2c_diag(0x42000000);
+		printk(KERN_EMERG "L2C: Cache Parity Error, addr[16:26] = 0x%08x\n", addr);
+	}
+	if (sr & L2C_SR_TPE){
+		/* Read tag trapped address */
+		u32 addr = l2c_diag(0x82000000) >> 16;
+		printk(KERN_EMERG "L2C: Tag Parity Error, addr[16:26] = 0x%08x\n", addr);
+	}
+
+	/* Clear parity errors */
+	if (sr & (L2C_SR_CPE | L2C_SR_TPE)){
+		mtdcr(DCRN_L2C0_ADDR, 0);
+		mtdcr(DCRN_L2C0_CMD, L2C_CMD_CCP | L2C_CMD_CTE);
+	} else
+		printk(KERN_EMERG "L2C: LRU error\n");
+
+	return IRQ_HANDLED;
+}
+
+/* Enable L2 cache */
+void __init ibm440gx_l2c_enable(void){
+	u32 r;
+	unsigned long flags;
+
+	/* Install error handler */
+	if (request_irq(87, l2c_error_handler, SA_INTERRUPT, "L2C", 0) < 0){
+		printk(KERN_ERR "Cannot install L2C error handler, cache is not enabled\n");
+		return;
+	}
+
+	local_irq_save(flags);
+	asm volatile ("sync" ::: "memory");
+
+	/* Disable SRAM */
+	mtdcr(DCRN_SRAM0_DPC,   mfdcr(DCRN_SRAM0_DPC)   & ~SRAM_DPC_ENABLE);
+	mtdcr(DCRN_SRAM0_SB0CR, mfdcr(DCRN_SRAM0_SB0CR) & ~SRAM_SBCR_BU_MASK);
+	mtdcr(DCRN_SRAM0_SB1CR, mfdcr(DCRN_SRAM0_SB1CR) & ~SRAM_SBCR_BU_MASK);
+	mtdcr(DCRN_SRAM0_SB2CR, mfdcr(DCRN_SRAM0_SB2CR) & ~SRAM_SBCR_BU_MASK);
+	mtdcr(DCRN_SRAM0_SB3CR, mfdcr(DCRN_SRAM0_SB3CR) & ~SRAM_SBCR_BU_MASK);
+
+	/* Enable L2_MODE without ICU/DCU */
+	r = mfdcr(DCRN_L2C0_CFG) & ~(L2C_CFG_ICU | L2C_CFG_DCU | L2C_CFG_SS_MASK);
+	r |= L2C_CFG_L2M | L2C_CFG_SS_256;
+	mtdcr(DCRN_L2C0_CFG, r);
+
+	mtdcr(DCRN_L2C0_ADDR, 0);
+
+	/* Hardware Clear Command */
+	mtdcr(DCRN_L2C0_CMD, L2C_CMD_HCC);
+	while (!(mfdcr(DCRN_L2C0_SR) & L2C_SR_CC)) ;
+
+	/* Clear Cache Parity and Tag Errors */
+	mtdcr(DCRN_L2C0_CMD, L2C_CMD_CCP | L2C_CMD_CTE);
+
+	/* Enable 64G snoop region starting at 0 */
+	r = mfdcr(DCRN_L2C0_SNP0) & ~(L2C_SNP_BA_MASK | L2C_SNP_SSR_MASK);
+	r |= L2C_SNP_SSR_32G | L2C_SNP_ESR;
+	mtdcr(DCRN_L2C0_SNP0, r);
+
+	r = mfdcr(DCRN_L2C0_SNP1) & ~(L2C_SNP_BA_MASK | L2C_SNP_SSR_MASK);
+	r |= 0x80000000 | L2C_SNP_SSR_32G | L2C_SNP_ESR;
+	mtdcr(DCRN_L2C0_SNP1, r);
+
+	asm volatile ("sync" ::: "memory");
+
+	/* Enable ICU/DCU ports */
+	r = mfdcr(DCRN_L2C0_CFG);
+	r &= ~(L2C_CFG_DCW_MASK | L2C_CFG_PMUX_MASK | L2C_CFG_PMIM | L2C_CFG_TPEI
+		| L2C_CFG_CPEI | L2C_CFG_NAM | L2C_CFG_NBRM);
+	r |= L2C_CFG_ICU | L2C_CFG_DCU | L2C_CFG_TPC | L2C_CFG_CPC | L2C_CFG_FRAN
+		| L2C_CFG_CPIM | L2C_CFG_TPIM | L2C_CFG_LIM | L2C_CFG_SMCM;
+	mtdcr(DCRN_L2C0_CFG, r);
+
+	asm volatile ("sync; isync" ::: "memory");
+	local_irq_restore(flags);
+}
+
+/* Disable L2 cache */
+void __init ibm440gx_l2c_disable(void){
+	u32 r;
+	unsigned long flags;
+
+	local_irq_save(flags);
+	asm volatile ("sync" ::: "memory");
+
+	/* Disable L2C mode */
+	r = mfdcr(DCRN_L2C0_CFG) & ~(L2C_CFG_L2M | L2C_CFG_ICU | L2C_CFG_DCU);
+	mtdcr(DCRN_L2C0_CFG, r);
+
+	/* Enable SRAM */
+	mtdcr(DCRN_SRAM0_DPC, mfdcr(DCRN_SRAM0_DPC) | SRAM_DPC_ENABLE);
+	mtdcr(DCRN_SRAM0_SB0CR,
+	      SRAM_SBCR_BAS0 | SRAM_SBCR_BS_64KB | SRAM_SBCR_BU_RW);
+	mtdcr(DCRN_SRAM0_SB1CR,
+	      SRAM_SBCR_BAS1 | SRAM_SBCR_BS_64KB | SRAM_SBCR_BU_RW);
+	mtdcr(DCRN_SRAM0_SB2CR,
+	      SRAM_SBCR_BAS2 | SRAM_SBCR_BS_64KB | SRAM_SBCR_BU_RW);
+	mtdcr(DCRN_SRAM0_SB3CR,
+	      SRAM_SBCR_BAS3 | SRAM_SBCR_BS_64KB | SRAM_SBCR_BU_RW);
+
+	asm volatile ("sync; isync" ::: "memory");
+	local_irq_restore(flags);
+}
+
+void __init ibm440gx_l2c_setup(struct ibm44x_clocks* p)
+{
+	/* Disable L2C on rev.A, rev.B and 800MHz version of rev.C,
+	   enable it on all other revisions
+	 */
+	u32 pvr = mfspr(SPRN_PVR);
+	if (pvr == PVR_440GX_RA || pvr == PVR_440GX_RB ||
+	    (pvr == PVR_440GX_RC && p->cpu > 667000000))
+		ibm440gx_l2c_disable();
+	else
+		ibm440gx_l2c_enable();
+}
+
+int __init ibm440gx_get_eth_grp(void)
+{
+	return (SDR_READ(DCRN_SDR_PFC1) & DCRN_SDR_PFC1_EPS) >> DCRN_SDR_PFC1_EPS_SHIFT;
+}
+
+void __init ibm440gx_set_eth_grp(int group)
+{
+	SDR_WRITE(DCRN_SDR_PFC1, (SDR_READ(DCRN_SDR_PFC1) & ~DCRN_SDR_PFC1_EPS) | (group << DCRN_SDR_PFC1_EPS_SHIFT));
+}
+
+void __init ibm440gx_tah_enable(void)
+{
+	/* Enable TAH0 and TAH1 */
+	SDR_WRITE(DCRN_SDR_MFR,SDR_READ(DCRN_SDR_MFR) &
+			~DCRN_SDR_MFR_TAH0);
+	SDR_WRITE(DCRN_SDR_MFR,SDR_READ(DCRN_SDR_MFR) &
+			~DCRN_SDR_MFR_TAH1);
+}
+
+int ibm440gx_show_cpuinfo(struct seq_file *m){
+
+	u32 l2c_cfg = mfdcr(DCRN_L2C0_CFG);
+	const char* s;
+	if (l2c_cfg & L2C_CFG_L2M){
+	    switch (l2c_cfg & (L2C_CFG_ICU | L2C_CFG_DCU)){
+		case L2C_CFG_ICU: s = "I-Cache only";    break;
+		case L2C_CFG_DCU: s = "D-Cache only";    break;
+		default:	  s = "I-Cache/D-Cache"; break;
+	    }
+	}
+	else
+	    s = "disabled";
+
+	seq_printf(m, "L2-Cache\t: %s (0x%08x 0x%08x)\n", s,
+	    l2c_cfg, mfdcr(DCRN_L2C0_SR));
+
+	return 0;
+}
+
diff --git a/arch/ppc/syslib/ibm440gx_common.h b/arch/ppc/syslib/ibm440gx_common.h
new file mode 100644
index 000000000000..e73aa0411d35
--- /dev/null
+++ b/arch/ppc/syslib/ibm440gx_common.h
@@ -0,0 +1,57 @@
+/*
+ * arch/ppc/kernel/ibm440gx_common.h
+ *
+ * PPC440GX system library
+ *
+ * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
+ * Copyright (c) 2003, 2004 Zultys Technologies
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+#ifdef __KERNEL__
+#ifndef __PPC_SYSLIB_IBM440GX_COMMON_H
+#define __PPC_SYSLIB_IBM440GX_COMMON_H
+
+#ifndef __ASSEMBLY__
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/seq_file.h>
+#include <syslib/ibm44x_common.h>
+
+/*
+ * Please, refer to the Figure 14.1 in 440GX user manual
+ *
+ * if internal UART clock is used, ser_clk is ignored
+ */
+void ibm440gx_get_clocks(struct ibm44x_clocks*, unsigned int sys_clk,
+	unsigned int ser_clk) __init;
+
+/* Enable L2 cache */
+void ibm440gx_l2c_enable(void) __init;
+
+/* Disable L2 cache */
+void ibm440gx_l2c_disable(void) __init;
+
+/* Enable/disable L2 cache for a particular chip revision */
+void ibm440gx_l2c_setup(struct ibm44x_clocks*) __init;
+
+/* Get Ethernet Group */
+int ibm440gx_get_eth_grp(void) __init;
+
+/* Set Ethernet Group */
+void ibm440gx_set_eth_grp(int group) __init;
+
+/* Enable TAH devices */
+void ibm440gx_tah_enable(void) __init;
+
+/* Add L2C info to /proc/cpuinfo */
+int ibm440gx_show_cpuinfo(struct seq_file*);
+
+#endif /* __ASSEMBLY__ */
+#endif /* __PPC_SYSLIB_IBM440GX_COMMON_H */
+#endif /* __KERNEL__ */
diff --git a/arch/ppc/syslib/ibm440sp_common.c b/arch/ppc/syslib/ibm440sp_common.c
new file mode 100644
index 000000000000..417d4cff77a0
--- /dev/null
+++ b/arch/ppc/syslib/ibm440sp_common.c
@@ -0,0 +1,71 @@
+/*
+ * arch/ppc/syslib/ibm440sp_common.c
+ *
+ * PPC440SP system library
+ *
+ * Matt Porter <mporter@kernel.crashing.org>
+ * Copyright 2002-2005 MontaVista Software Inc.
+ *
+ * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
+ * Copyright (c) 2003, 2004 Zultys Technologies
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/serial.h>
+
+#include <asm/param.h>
+#include <asm/ibm44x.h>
+#include <asm/mmu.h>
+#include <asm/machdep.h>
+#include <asm/time.h>
+#include <asm/ppc4xx_pic.h>
+
+/*
+ * Read the 440SP memory controller to get size of system memory.
+ */
+unsigned long __init ibm440sp_find_end_of_memory(void)
+{
+	u32 i;
+	u32 mem_size = 0;
+
+	/* Read two bank sizes and sum */
+	for (i=0; i<2; i++)
+		switch (mfdcr(DCRN_MQ0_BS0BAS + i) & MQ0_CONFIG_SIZE_MASK) {
+			case MQ0_CONFIG_SIZE_8M:
+				mem_size += PPC44x_MEM_SIZE_8M;
+				break;
+			case MQ0_CONFIG_SIZE_16M:
+				mem_size += PPC44x_MEM_SIZE_16M;
+				break;
+			case MQ0_CONFIG_SIZE_32M:
+				mem_size += PPC44x_MEM_SIZE_32M;
+				break;
+			case MQ0_CONFIG_SIZE_64M:
+				mem_size += PPC44x_MEM_SIZE_64M;
+				break;
+			case MQ0_CONFIG_SIZE_128M:
+				mem_size += PPC44x_MEM_SIZE_128M;
+				break;
+			case MQ0_CONFIG_SIZE_256M:
+				mem_size += PPC44x_MEM_SIZE_256M;
+				break;
+			case MQ0_CONFIG_SIZE_512M:
+				mem_size += PPC44x_MEM_SIZE_512M;
+				break;
+			case MQ0_CONFIG_SIZE_1G:
+				mem_size += PPC44x_MEM_SIZE_1G;
+				break;
+			case MQ0_CONFIG_SIZE_2G:
+				mem_size += PPC44x_MEM_SIZE_2G;
+				break;
+			default:
+				break;
+		}
+	return mem_size;
+}
diff --git a/arch/ppc/syslib/ibm440sp_common.h b/arch/ppc/syslib/ibm440sp_common.h
new file mode 100644
index 000000000000..a21a9906dcc9
--- /dev/null
+++ b/arch/ppc/syslib/ibm440sp_common.h
@@ -0,0 +1,25 @@
+/*
+ * arch/ppc/syslib/ibm440sp_common.h
+ *
+ * PPC440SP system library
+ *
+ * Matt Porter <mporter@kernel.crashing.org>
+ * Copyright 2004-2005 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+#ifdef __KERNEL__
+#ifndef __PPC_SYSLIB_IBM440SP_COMMON_H
+#define __PPC_SYSLIB_IBM440SP_COMMON_H
+
+#ifndef __ASSEMBLY__
+
+extern unsigned long __init ibm440sp_find_end_of_memory(void);
+
+#endif /* __ASSEMBLY__ */
+#endif /* __PPC_SYSLIB_IBM440SP_COMMON_H */
+#endif /* __KERNEL__ */
diff --git a/arch/ppc/syslib/ibm44x_common.c b/arch/ppc/syslib/ibm44x_common.c
new file mode 100644
index 000000000000..7612e0623f99
--- /dev/null
+++ b/arch/ppc/syslib/ibm44x_common.c
@@ -0,0 +1,193 @@
+/*
+ * arch/ppc/syslib/ibm44x_common.c
+ *
+ * PPC44x system library
+ *
+ * Matt Porter <mporter@kernel.crashing.org>
+ * Copyright 2002-2005 MontaVista Software Inc.
+ *
+ * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
+ * Copyright (c) 2003, 2004 Zultys Technologies
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+#include <linux/config.h>
+#include <linux/time.h>
+#include <linux/types.h>
+#include <linux/serial.h>
+#include <linux/module.h>
+
+#include <asm/ibm44x.h>
+#include <asm/mmu.h>
+#include <asm/machdep.h>
+#include <asm/time.h>
+#include <asm/ppc4xx_pic.h>
+#include <asm/param.h>
+
+#include <syslib/gen550.h>
+
+phys_addr_t fixup_bigphys_addr(phys_addr_t addr, phys_addr_t size)
+{
+	phys_addr_t page_4gb = 0;
+
+        /*
+	 * Trap the least significant 32-bit portions of an
+	 * address in the 440's 36-bit address space.  Fix
+	 * them up with the appropriate ERPN
+	 */
+	if ((addr >= PPC44x_IO_LO) && (addr <= PPC44x_IO_HI))
+		page_4gb = PPC44x_IO_PAGE;
+	else if ((addr >= PPC44x_PCI0CFG_LO) && (addr <= PPC44x_PCI0CFG_HI))
+		page_4gb = PPC44x_PCICFG_PAGE;
+#ifdef CONFIG_440SP
+	else if ((addr >= PPC44x_PCI1CFG_LO) && (addr <= PPC44x_PCI1CFG_HI))
+		page_4gb = PPC44x_PCICFG_PAGE;
+	else if ((addr >= PPC44x_PCI2CFG_LO) && (addr <= PPC44x_PCI2CFG_HI))
+		page_4gb = PPC44x_PCICFG_PAGE;
+#endif
+	else if ((addr >= PPC44x_PCIMEM_LO) && (addr <= PPC44x_PCIMEM_HI))
+		page_4gb = PPC44x_PCIMEM_PAGE;
+
+	return (page_4gb | addr);
+};
+EXPORT_SYMBOL(fixup_bigphys_addr);
+
+void __init ibm44x_calibrate_decr(unsigned int freq)
+{
+	tb_ticks_per_jiffy = freq / HZ;
+	tb_to_us = mulhwu_scale_factor(freq, 1000000);
+
+	/* Set the time base to zero */
+	mtspr(SPRN_TBWL, 0);
+	mtspr(SPRN_TBWU, 0);
+
+	/* Clear any pending timer interrupts */
+	mtspr(SPRN_TSR, TSR_ENW | TSR_WIS | TSR_DIS | TSR_FIS);
+
+	/* Enable decrementer interrupt */
+	mtspr(SPRN_TCR, TCR_DIE);
+}
+
+extern void abort(void);
+
+static void ibm44x_restart(char *cmd)
+{
+	local_irq_disable();
+	abort();
+}
+
+static void ibm44x_power_off(void)
+{
+	local_irq_disable();
+	for(;;);
+}
+
+static void ibm44x_halt(void)
+{
+	local_irq_disable();
+	for(;;);
+}
+
+/*
+ * Read the 44x memory controller to get size of system memory.
+ */
+static unsigned long __init ibm44x_find_end_of_memory(void)
+{
+	u32 i, bank_config;
+	u32 mem_size = 0;
+
+	for (i=0; i<4; i++)
+	{
+		switch (i)
+		{
+			case 0:
+				mtdcr(DCRN_SDRAM0_CFGADDR, SDRAM0_B0CR);
+				break;
+			case 1:
+				mtdcr(DCRN_SDRAM0_CFGADDR, SDRAM0_B1CR);
+				break;
+			case 2:
+				mtdcr(DCRN_SDRAM0_CFGADDR, SDRAM0_B2CR);
+				break;
+			case 3:
+				mtdcr(DCRN_SDRAM0_CFGADDR, SDRAM0_B3CR);
+				break;
+		}
+
+		bank_config = mfdcr(DCRN_SDRAM0_CFGDATA);
+
+		if (!(bank_config & SDRAM_CONFIG_BANK_ENABLE))
+			continue;
+		switch (SDRAM_CONFIG_BANK_SIZE(bank_config))
+		{
+			case SDRAM_CONFIG_SIZE_8M:
+				mem_size += PPC44x_MEM_SIZE_8M;
+				break;
+			case SDRAM_CONFIG_SIZE_16M:
+				mem_size += PPC44x_MEM_SIZE_16M;
+				break;
+			case SDRAM_CONFIG_SIZE_32M:
+				mem_size += PPC44x_MEM_SIZE_32M;
+				break;
+			case SDRAM_CONFIG_SIZE_64M:
+				mem_size += PPC44x_MEM_SIZE_64M;
+				break;
+			case SDRAM_CONFIG_SIZE_128M:
+				mem_size += PPC44x_MEM_SIZE_128M;
+				break;
+			case SDRAM_CONFIG_SIZE_256M:
+				mem_size += PPC44x_MEM_SIZE_256M;
+				break;
+			case SDRAM_CONFIG_SIZE_512M:
+				mem_size += PPC44x_MEM_SIZE_512M;
+				break;
+		}
+	}
+	return mem_size;
+}
+
+void __init ibm44x_platform_init(void)
+{
+	ppc_md.init_IRQ = ppc4xx_pic_init;
+	ppc_md.find_end_of_memory = ibm44x_find_end_of_memory;
+	ppc_md.restart = ibm44x_restart;
+	ppc_md.power_off = ibm44x_power_off;
+	ppc_md.halt = ibm44x_halt;
+
+#ifdef CONFIG_SERIAL_TEXT_DEBUG
+	ppc_md.progress = gen550_progress;
+#endif /* CONFIG_SERIAL_TEXT_DEBUG */
+#ifdef CONFIG_KGDB
+	ppc_md.kgdb_map_scc = gen550_kgdb_map_scc;
+#endif
+
+	/*
+	 * The Abatron BDI JTAG debugger does not tolerate others
+	 * mucking with the debug registers.
+	 */
+#if !defined(CONFIG_BDI_SWITCH)
+	/* Enable internal debug mode */
+        mtspr(SPRN_DBCR0, (DBCR0_IDM));
+
+	/* Clear any residual debug events */
+	mtspr(SPRN_DBSR, 0xffffffff);
+#endif
+}
+
+/* Called from MachineCheckException */
+void platform_machine_check(struct pt_regs *regs)
+{
+    	printk("PLB0: BEAR=0x%08x%08x ACR=  0x%08x BESR= 0x%08x\n",
+		mfdcr(DCRN_PLB0_BEARH), mfdcr(DCRN_PLB0_BEARL),
+		mfdcr(DCRN_PLB0_ACR),  mfdcr(DCRN_PLB0_BESR));
+	printk("POB0: BEAR=0x%08x%08x BESR0=0x%08x BESR1=0x%08x\n",
+		mfdcr(DCRN_POB0_BEARH), mfdcr(DCRN_POB0_BEARL),
+		mfdcr(DCRN_POB0_BESR0), mfdcr(DCRN_POB0_BESR1));
+	printk("OPB0: BEAR=0x%08x%08x BSTAT=0x%08x\n",
+		mfdcr(DCRN_OPB0_BEARH), mfdcr(DCRN_OPB0_BEARL),
+		mfdcr(DCRN_OPB0_BSTAT));
+}
diff --git a/arch/ppc/syslib/ibm44x_common.h b/arch/ppc/syslib/ibm44x_common.h
new file mode 100644
index 000000000000..b14eb603ce01
--- /dev/null
+++ b/arch/ppc/syslib/ibm44x_common.h
@@ -0,0 +1,42 @@
+/*
+ * arch/ppc/kernel/ibm44x_common.h
+ *
+ * PPC44x system library
+ *
+ * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
+ * Copyright (c) 2003, 2004 Zultys Technologies
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+#ifdef __KERNEL__
+#ifndef __PPC_SYSLIB_IBM44x_COMMON_H
+#define __PPC_SYSLIB_IBM44x_COMMON_H
+
+#ifndef __ASSEMBLY__
+
+/*
+ * All clocks are in Hz
+ */
+struct ibm44x_clocks {
+	unsigned int vco;	/* VCO, 0 if system PLL is bypassed */
+	unsigned int cpu;	/* CPUCoreClk */
+	unsigned int plb;	/* PLBClk */
+	unsigned int opb;	/* OPBClk */
+	unsigned int ebc;	/* PerClk */
+	unsigned int uart0;
+	unsigned int uart1;
+};
+
+/* common 44x platform init */
+void ibm44x_platform_init(void) __init;
+
+/* initialize decrementer and tick-related variables */
+void ibm44x_calibrate_decr(unsigned int freq) __init;
+
+#endif /* __ASSEMBLY__ */
+#endif /* __PPC_SYSLIB_IBM44x_COMMON_H */
+#endif /* __KERNEL__ */
diff --git a/arch/ppc/syslib/ibm_ocp.c b/arch/ppc/syslib/ibm_ocp.c
new file mode 100644
index 000000000000..3f6e55c79181
--- /dev/null
+++ b/arch/ppc/syslib/ibm_ocp.c
@@ -0,0 +1,9 @@
+#include <linux/module.h>
+#include <asm/ocp.h>
+
+struct ocp_sys_info_data ocp_sys_info = {
+	.opb_bus_freq	=	50000000,	/* OPB Bus Frequency (Hz) */
+	.ebc_bus_freq	=	33333333,	/* EBC Bus Frequency (Hz) */
+};
+
+EXPORT_SYMBOL(ocp_sys_info);
diff --git a/arch/ppc/syslib/indirect_pci.c b/arch/ppc/syslib/indirect_pci.c
new file mode 100644
index 000000000000..a5a752609e2c
--- /dev/null
+++ b/arch/ppc/syslib/indirect_pci.c
@@ -0,0 +1,135 @@
+/*
+ * Support for indirect PCI bridges.
+ *
+ * Copyright (C) 1998 Gabriel Paubert.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/string.h>
+#include <linux/init.h>
+#include <linux/bootmem.h>
+
+#include <asm/io.h>
+#include <asm/prom.h>
+#include <asm/pci-bridge.h>
+#include <asm/machdep.h>
+
+#ifdef CONFIG_PPC_INDIRECT_PCI_BE
+#define PCI_CFG_OUT out_be32
+#else
+#define PCI_CFG_OUT out_le32
+#endif
+
+static int
+indirect_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
+		     int len, u32 *val)
+{
+	struct pci_controller *hose = bus->sysdata;
+	volatile void __iomem *cfg_data;
+	u8 cfg_type = 0;
+
+	if (ppc_md.pci_exclude_device)
+		if (ppc_md.pci_exclude_device(bus->number, devfn))
+			return PCIBIOS_DEVICE_NOT_FOUND;
+	
+	if (hose->set_cfg_type)
+		if (bus->number != hose->first_busno)
+			cfg_type = 1;
+
+	PCI_CFG_OUT(hose->cfg_addr, 					 
+		 (0x80000000 | ((bus->number - hose->bus_offset) << 16)
+		  | (devfn << 8) | ((offset & 0xfc) | cfg_type)));
+
+	/*
+	 * Note: the caller has already checked that offset is
+	 * suitably aligned and that len is 1, 2 or 4.
+	 */
+	cfg_data = hose->cfg_data + (offset & 3);
+	switch (len) {
+	case 1:
+		*val = in_8(cfg_data);
+		break;
+	case 2:
+		*val = in_le16(cfg_data);
+		break;
+	default:
+		*val = in_le32(cfg_data);
+		break;
+	}
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int
+indirect_write_config(struct pci_bus *bus, unsigned int devfn, int offset,
+		      int len, u32 val)
+{
+	struct pci_controller *hose = bus->sysdata;
+	volatile void __iomem *cfg_data;
+	u8 cfg_type = 0;
+
+	if (ppc_md.pci_exclude_device)
+		if (ppc_md.pci_exclude_device(bus->number, devfn))
+			return PCIBIOS_DEVICE_NOT_FOUND;
+
+	if (hose->set_cfg_type)
+		if (bus->number != hose->first_busno)
+			cfg_type = 1;
+
+	PCI_CFG_OUT(hose->cfg_addr, 					 
+		 (0x80000000 | ((bus->number - hose->bus_offset) << 16)
+		  | (devfn << 8) | ((offset & 0xfc) | cfg_type)));
+
+	/*
+	 * Note: the caller has already checked that offset is
+	 * suitably aligned and that len is 1, 2 or 4.
+	 */
+	cfg_data = hose->cfg_data + (offset & 3);
+	switch (len) {
+	case 1:
+		out_8(cfg_data, val);
+		break;
+	case 2:
+		out_le16(cfg_data, val);
+		break;
+	default:
+		out_le32(cfg_data, val);
+		break;
+	}
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static struct pci_ops indirect_pci_ops =
+{
+	indirect_read_config,
+	indirect_write_config
+};
+
+void __init
+setup_indirect_pci_nomap(struct pci_controller* hose, void __iomem * cfg_addr,
+	void __iomem * cfg_data)
+{
+	hose->cfg_addr = cfg_addr;
+	hose->cfg_data = cfg_data;
+	hose->ops = &indirect_pci_ops;
+}
+
+void __init
+setup_indirect_pci(struct pci_controller* hose, u32 cfg_addr, u32 cfg_data)
+{
+	unsigned long base = cfg_addr & PAGE_MASK;
+	void __iomem *mbase, *addr, *data;
+
+	mbase = ioremap(base, PAGE_SIZE);
+	addr = mbase + (cfg_addr & ~PAGE_MASK);
+	if ((cfg_data & PAGE_MASK) != base)
+		mbase = ioremap(cfg_data & PAGE_MASK, PAGE_SIZE);
+	data = mbase + (cfg_data & ~PAGE_MASK);
+	setup_indirect_pci_nomap(hose, addr, data);
+}
diff --git a/arch/ppc/syslib/ipic.c b/arch/ppc/syslib/ipic.c
new file mode 100644
index 000000000000..acb2cde3171f
--- /dev/null
+++ b/arch/ppc/syslib/ipic.c
@@ -0,0 +1,646 @@
+/*
+ * include/asm-ppc/ipic.c
+ *
+ * IPIC routines implementations.
+ *
+ * Copyright 2005 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/reboot.h>
+#include <linux/slab.h>
+#include <linux/stddef.h>
+#include <linux/sched.h>
+#include <linux/signal.h>
+#include <linux/sysdev.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+#include <asm/ipic.h>
+#include <asm/mpc83xx.h>
+
+#include "ipic.h"
+
+static struct ipic p_ipic;
+static struct ipic * primary_ipic;
+
+static struct ipic_info ipic_info[] = {
+	[9] = {
+		.pend	= IPIC_SIPNR_H,
+		.mask	= IPIC_SIMSR_H,
+		.prio	= IPIC_SIPRR_D,
+		.force	= IPIC_SIFCR_H,
+		.bit	= 24,
+		.prio_mask = 0,
+	},
+	[10] = {
+		.pend	= IPIC_SIPNR_H,
+		.mask	= IPIC_SIMSR_H,
+		.prio	= IPIC_SIPRR_D,
+		.force	= IPIC_SIFCR_H,
+		.bit	= 25,
+		.prio_mask = 1,
+	},
+	[11] = {
+		.pend	= IPIC_SIPNR_H,
+		.mask	= IPIC_SIMSR_H,
+		.prio	= IPIC_SIPRR_D,
+		.force	= IPIC_SIFCR_H,
+		.bit	= 26,
+		.prio_mask = 2,
+	},
+	[14] = {
+		.pend	= IPIC_SIPNR_H,
+		.mask	= IPIC_SIMSR_H,
+		.prio	= IPIC_SIPRR_D,
+		.force	= IPIC_SIFCR_H,
+		.bit	= 29,
+		.prio_mask = 5,
+	},
+	[15] = {
+		.pend	= IPIC_SIPNR_H,
+		.mask	= IPIC_SIMSR_H,
+		.prio	= IPIC_SIPRR_D,
+		.force	= IPIC_SIFCR_H,
+		.bit	= 30,
+		.prio_mask = 6,
+	},
+	[16] = {
+		.pend	= IPIC_SIPNR_H,
+		.mask	= IPIC_SIMSR_H,
+		.prio	= IPIC_SIPRR_D,
+		.force	= IPIC_SIFCR_H,
+		.bit	= 31,
+		.prio_mask = 7,
+	},
+	[17] = {
+		.pend	= IPIC_SIPNR_H,
+		.mask	= IPIC_SEMSR,
+		.prio	= IPIC_SMPRR_A,
+		.force	= IPIC_SEFCR,
+		.bit	= 1,
+		.prio_mask = 5,
+	},
+	[18] = {
+		.pend	= IPIC_SIPNR_H,
+		.mask	= IPIC_SEMSR,
+		.prio	= IPIC_SMPRR_A,
+		.force	= IPIC_SEFCR,
+		.bit	= 2,
+		.prio_mask = 6,
+	},
+	[19] = {
+		.pend	= IPIC_SIPNR_H,
+		.mask	= IPIC_SEMSR,
+		.prio	= IPIC_SMPRR_A,
+		.force	= IPIC_SEFCR,
+		.bit	= 3,
+		.prio_mask = 7,
+	},
+	[20] = {
+		.pend	= IPIC_SIPNR_H,
+		.mask	= IPIC_SEMSR,
+		.prio	= IPIC_SMPRR_B,
+		.force	= IPIC_SEFCR,
+		.bit	= 4,
+		.prio_mask = 4,
+	},
+	[21] = {
+		.pend	= IPIC_SIPNR_H,
+		.mask	= IPIC_SEMSR,
+		.prio	= IPIC_SMPRR_B,
+		.force	= IPIC_SEFCR,
+		.bit	= 5,
+		.prio_mask = 5,
+	},
+	[22] = {
+		.pend	= IPIC_SIPNR_H,
+		.mask	= IPIC_SEMSR,
+		.prio	= IPIC_SMPRR_B,
+		.force	= IPIC_SEFCR,
+		.bit	= 6,
+		.prio_mask = 6,
+	},
+	[23] = {
+		.pend	= IPIC_SIPNR_H,
+		.mask	= IPIC_SEMSR,
+		.prio	= IPIC_SMPRR_B,
+		.force	= IPIC_SEFCR,
+		.bit	= 7,
+		.prio_mask = 7,
+	},
+	[32] = {
+		.pend	= IPIC_SIPNR_H,
+		.mask	= IPIC_SIMSR_H,
+		.prio	= IPIC_SIPRR_A,
+		.force	= IPIC_SIFCR_H,
+		.bit	= 0,
+		.prio_mask = 0,
+	},
+	[33] = {
+		.pend	= IPIC_SIPNR_H,
+		.mask	= IPIC_SIMSR_H,
+		.prio	= IPIC_SIPRR_A,
+		.force	= IPIC_SIFCR_H,
+		.bit	= 1,
+		.prio_mask = 1,
+	},
+	[34] = {
+		.pend	= IPIC_SIPNR_H,
+		.mask	= IPIC_SIMSR_H,
+		.prio	= IPIC_SIPRR_A,
+		.force	= IPIC_SIFCR_H,
+		.bit	= 2,
+		.prio_mask = 2,
+	},
+	[35] = {
+		.pend	= IPIC_SIPNR_H,
+		.mask	= IPIC_SIMSR_H,
+		.prio	= IPIC_SIPRR_A,
+		.force	= IPIC_SIFCR_H,
+		.bit	= 3,
+		.prio_mask = 3,
+	},
+	[36] = {
+		.pend	= IPIC_SIPNR_H,
+		.mask	= IPIC_SIMSR_H,
+		.prio	= IPIC_SIPRR_A,
+		.force	= IPIC_SIFCR_H,
+		.bit	= 4,
+		.prio_mask = 4,
+	},
+	[37] = {
+		.pend	= IPIC_SIPNR_H,
+		.mask	= IPIC_SIMSR_H,
+		.prio	= IPIC_SIPRR_A,
+		.force	= IPIC_SIFCR_H,
+		.bit	= 5,
+		.prio_mask = 5,
+	},
+	[38] = {
+		.pend	= IPIC_SIPNR_H,
+		.mask	= IPIC_SIMSR_H,
+		.prio	= IPIC_SIPRR_A,
+		.force	= IPIC_SIFCR_H,
+		.bit	= 6,
+		.prio_mask = 6,
+	},
+	[39] = {
+		.pend	= IPIC_SIPNR_H,
+		.mask	= IPIC_SIMSR_H,
+		.prio	= IPIC_SIPRR_A,
+		.force	= IPIC_SIFCR_H,
+		.bit	= 7,
+		.prio_mask = 7,
+	},
+	[48] = {
+		.pend	= IPIC_SEPNR,
+		.mask	= IPIC_SEMSR,
+		.prio	= IPIC_SMPRR_A,
+		.force	= IPIC_SEFCR,
+		.bit	= 0,
+		.prio_mask = 4,
+	},
+	[64] = {
+		.pend	= IPIC_SIPNR_H,
+		.mask	= IPIC_SIMSR_L,
+		.prio	= IPIC_SMPRR_A,
+		.force	= IPIC_SIFCR_L,
+		.bit	= 0,
+		.prio_mask = 0,
+	},
+	[65] = {
+		.pend	= IPIC_SIPNR_H,
+		.mask	= IPIC_SIMSR_L,
+		.prio	= IPIC_SMPRR_A,
+		.force	= IPIC_SIFCR_L,
+		.bit	= 1,
+		.prio_mask = 1,
+	},
+	[66] = {
+		.pend	= IPIC_SIPNR_H,
+		.mask	= IPIC_SIMSR_L,
+		.prio	= IPIC_SMPRR_A,
+		.force	= IPIC_SIFCR_L,
+		.bit	= 2,
+		.prio_mask = 2,
+	},
+	[67] = {
+		.pend	= IPIC_SIPNR_H,
+		.mask	= IPIC_SIMSR_L,
+		.prio	= IPIC_SMPRR_A,
+		.force	= IPIC_SIFCR_L,
+		.bit	= 3,
+		.prio_mask = 3,
+	},
+	[68] = {
+		.pend	= IPIC_SIPNR_H,
+		.mask	= IPIC_SIMSR_L,
+		.prio	= IPIC_SMPRR_B,
+		.force	= IPIC_SIFCR_L,
+		.bit	= 4,
+		.prio_mask = 0,
+	},
+	[69] = {
+		.pend	= IPIC_SIPNR_H,
+		.mask	= IPIC_SIMSR_L,
+		.prio	= IPIC_SMPRR_B,
+		.force	= IPIC_SIFCR_L,
+		.bit	= 5,
+		.prio_mask = 1,
+	},
+	[70] = {
+		.pend	= IPIC_SIPNR_H,
+		.mask	= IPIC_SIMSR_L,
+		.prio	= IPIC_SMPRR_B,
+		.force	= IPIC_SIFCR_L,
+		.bit	= 6,
+		.prio_mask = 2,
+	},
+	[71] = {
+		.pend	= IPIC_SIPNR_H,
+		.mask	= IPIC_SIMSR_L,
+		.prio	= IPIC_SMPRR_B,
+		.force	= IPIC_SIFCR_L,
+		.bit	= 7,
+		.prio_mask = 3,
+	},
+	[72] = {
+		.pend	= IPIC_SIPNR_H,
+		.mask	= IPIC_SIMSR_L,
+		.prio	= 0,
+		.force	= IPIC_SIFCR_L,
+		.bit	= 8,
+	},
+	[73] = {
+		.pend	= IPIC_SIPNR_H,
+		.mask	= IPIC_SIMSR_L,
+		.prio	= 0,
+		.force	= IPIC_SIFCR_L,
+		.bit	= 9,
+	},
+	[74] = {
+		.pend	= IPIC_SIPNR_H,
+		.mask	= IPIC_SIMSR_L,
+		.prio	= 0,
+		.force	= IPIC_SIFCR_L,
+		.bit	= 10,
+	},
+	[75] = {
+		.pend	= IPIC_SIPNR_H,
+		.mask	= IPIC_SIMSR_L,
+		.prio	= 0,
+		.force	= IPIC_SIFCR_L,
+		.bit	= 11,
+	},
+	[76] = {
+		.pend	= IPIC_SIPNR_H,
+		.mask	= IPIC_SIMSR_L,
+		.prio	= 0,
+		.force	= IPIC_SIFCR_L,
+		.bit	= 12,
+	},
+	[77] = {
+		.pend	= IPIC_SIPNR_H,
+		.mask	= IPIC_SIMSR_L,
+		.prio	= 0,
+		.force	= IPIC_SIFCR_L,
+		.bit	= 13,
+	},
+	[78] = {
+		.pend	= IPIC_SIPNR_H,
+		.mask	= IPIC_SIMSR_L,
+		.prio	= 0,
+		.force	= IPIC_SIFCR_L,
+		.bit	= 14,
+	},
+	[79] = {
+		.pend	= IPIC_SIPNR_H,
+		.mask	= IPIC_SIMSR_L,
+		.prio	= 0,
+		.force	= IPIC_SIFCR_L,
+		.bit	= 15,
+	},
+	[80] = {
+		.pend	= IPIC_SIPNR_H,
+		.mask	= IPIC_SIMSR_L,
+		.prio	= 0,
+		.force	= IPIC_SIFCR_L,
+		.bit	= 16,
+	},
+	[84] = {
+		.pend	= IPIC_SIPNR_H,
+		.mask	= IPIC_SIMSR_L,
+		.prio	= 0,
+		.force	= IPIC_SIFCR_L,
+		.bit	= 20,
+	},
+	[85] = {
+		.pend	= IPIC_SIPNR_H,
+		.mask	= IPIC_SIMSR_L,
+		.prio	= 0,
+		.force	= IPIC_SIFCR_L,
+		.bit	= 21,
+	},
+	[90] = {
+		.pend	= IPIC_SIPNR_H,
+		.mask	= IPIC_SIMSR_L,
+		.prio	= 0,
+		.force	= IPIC_SIFCR_L,
+		.bit	= 26,
+	},
+	[91] = {
+		.pend	= IPIC_SIPNR_H,
+		.mask	= IPIC_SIMSR_L,
+		.prio	= 0,
+		.force	= IPIC_SIFCR_L,
+		.bit	= 27,
+	},
+};
+
+static inline u32 ipic_read(volatile u32 __iomem *base, unsigned int reg)
+{
+	return in_be32(base + (reg >> 2));
+}
+
+static inline void ipic_write(volatile u32 __iomem *base, unsigned int reg, u32 value)
+{
+	out_be32(base + (reg >> 2), value);
+}
+
+static inline struct ipic * ipic_from_irq(unsigned int irq)
+{
+	return primary_ipic;
+}
+
+static void ipic_enable_irq(unsigned int irq)
+{
+	struct ipic *ipic = ipic_from_irq(irq);
+	unsigned int src = irq - ipic->irq_offset;
+	u32 temp;
+
+	temp = ipic_read(ipic->regs, ipic_info[src].mask);
+	temp |= (1 << (31 - ipic_info[src].bit));
+	ipic_write(ipic->regs, ipic_info[src].mask, temp);
+}
+
+static void ipic_disable_irq(unsigned int irq)
+{
+	struct ipic *ipic = ipic_from_irq(irq);
+	unsigned int src = irq - ipic->irq_offset;
+	u32 temp;
+
+	temp = ipic_read(ipic->regs, ipic_info[src].mask);
+	temp &= ~(1 << (31 - ipic_info[src].bit));
+	ipic_write(ipic->regs, ipic_info[src].mask, temp);
+}
+
+static void ipic_disable_irq_and_ack(unsigned int irq)
+{
+	struct ipic *ipic = ipic_from_irq(irq);
+	unsigned int src = irq - ipic->irq_offset;
+	u32 temp;
+
+	ipic_disable_irq(irq);
+
+	temp = ipic_read(ipic->regs, ipic_info[src].pend);
+	temp |= (1 << (31 - ipic_info[src].bit));
+	ipic_write(ipic->regs, ipic_info[src].pend, temp);
+}
+
+static void ipic_end_irq(unsigned int irq)
+{
+	if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
+		ipic_enable_irq(irq);
+}
+
+struct hw_interrupt_type ipic = {
+	.typename = " IPIC  ",
+	.enable = ipic_enable_irq,
+	.disable = ipic_disable_irq,
+	.ack = ipic_disable_irq_and_ack,
+	.end = ipic_end_irq,
+};
+
+void __init ipic_init(phys_addr_t phys_addr,
+		unsigned int flags,
+		unsigned int irq_offset,
+		unsigned char *senses,
+		unsigned int senses_count)
+{
+	u32 i, temp = 0;
+
+	primary_ipic = &p_ipic;
+	primary_ipic->regs = ioremap(phys_addr, MPC83xx_IPIC_SIZE);
+
+	primary_ipic->irq_offset = irq_offset;
+
+	ipic_write(primary_ipic->regs, IPIC_SICNR, 0x0);
+
+	/* default priority scheme is grouped. If spread mode is required
+	 * configure SICFR accordingly */
+	if (flags & IPIC_SPREADMODE_GRP_A)
+		temp |= SICFR_IPSA;
+	if (flags & IPIC_SPREADMODE_GRP_D)
+		temp |= SICFR_IPSD;
+	if (flags & IPIC_SPREADMODE_MIX_A)
+		temp |= SICFR_MPSA;
+	if (flags & IPIC_SPREADMODE_MIX_B)
+		temp |= SICFR_MPSB;
+
+	ipic_write(primary_ipic->regs, IPIC_SICNR, temp);
+
+	/* handle MCP route */
+	temp = 0;
+	if (flags & IPIC_DISABLE_MCP_OUT)
+		temp = SERCR_MCPR;
+	ipic_write(primary_ipic->regs, IPIC_SERCR, temp);
+
+	/* handle routing of IRQ0 to MCP */
+	temp = ipic_read(primary_ipic->regs, IPIC_SEMSR);
+
+	if (flags & IPIC_IRQ0_MCP)
+		temp |= SEMSR_SIRQ0;
+	else
+		temp &= ~SEMSR_SIRQ0;
+
+	ipic_write(primary_ipic->regs, IPIC_SEMSR, temp);
+
+	for (i = 0 ; i < NR_IPIC_INTS ; i++) {
+		irq_desc[i+irq_offset].handler = &ipic;
+		irq_desc[i+irq_offset].status = IRQ_LEVEL;
+	}
+
+	temp = 0;
+	for (i = 0 ; i < senses_count ; i++) {
+		if ((senses[i] & IRQ_SENSE_MASK) == IRQ_SENSE_EDGE) {
+			temp |= 1 << (16 - i);
+			if (i != 0)
+				irq_desc[i + irq_offset + MPC83xx_IRQ_EXT1 - 1].status = 0;
+			else
+				irq_desc[irq_offset + MPC83xx_IRQ_EXT0].status = 0;
+		}
+	}
+	ipic_write(primary_ipic->regs, IPIC_SECNR, temp);
+
+	printk ("IPIC (%d IRQ sources, %d External IRQs) at %p\n", NR_IPIC_INTS,
+			senses_count, primary_ipic->regs);
+}
+
+int ipic_set_priority(unsigned int irq, unsigned int priority)
+{
+	struct ipic *ipic = ipic_from_irq(irq);
+	unsigned int src = irq - ipic->irq_offset;
+	u32 temp;
+
+	if (priority > 7)
+		return -EINVAL;
+	if (src > 127)
+		return -EINVAL;
+	if (ipic_info[src].prio == 0)
+		return -EINVAL;
+
+	temp = ipic_read(ipic->regs, ipic_info[src].prio);
+
+	if (priority < 4) {
+		temp &= ~(0x7 << (20 + (3 - priority) * 3));
+		temp |= ipic_info[src].prio_mask << (20 + (3 - priority) * 3);
+	} else {
+		temp &= ~(0x7 << (4 + (7 - priority) * 3));
+		temp |= ipic_info[src].prio_mask << (4 + (7 - priority) * 3);
+	}
+
+	ipic_write(ipic->regs, ipic_info[src].prio, temp);
+
+	return 0;
+}
+
+void ipic_set_highest_priority(unsigned int irq)
+{
+	struct ipic *ipic = ipic_from_irq(irq);
+	unsigned int src = irq - ipic->irq_offset;
+	u32 temp;
+
+	temp = ipic_read(ipic->regs, IPIC_SICFR);
+
+	/* clear and set HPI */
+	temp &= 0x7f000000;
+	temp |= (src & 0x7f) << 24;
+
+	ipic_write(ipic->regs, IPIC_SICFR, temp);
+}
+
+void ipic_set_default_priority(void)
+{
+	ipic_set_priority(MPC83xx_IRQ_TSEC1_TX, 0);
+	ipic_set_priority(MPC83xx_IRQ_TSEC1_RX, 1);
+	ipic_set_priority(MPC83xx_IRQ_TSEC1_ERROR, 2);
+	ipic_set_priority(MPC83xx_IRQ_TSEC2_TX, 3);
+	ipic_set_priority(MPC83xx_IRQ_TSEC2_RX, 4);
+	ipic_set_priority(MPC83xx_IRQ_TSEC2_ERROR, 5);
+	ipic_set_priority(MPC83xx_IRQ_USB2_DR, 6);
+	ipic_set_priority(MPC83xx_IRQ_USB2_MPH, 7);
+
+	ipic_set_priority(MPC83xx_IRQ_UART1, 0);
+	ipic_set_priority(MPC83xx_IRQ_UART2, 1);
+	ipic_set_priority(MPC83xx_IRQ_SEC2, 2);
+	ipic_set_priority(MPC83xx_IRQ_IIC1, 5);
+	ipic_set_priority(MPC83xx_IRQ_IIC2, 6);
+	ipic_set_priority(MPC83xx_IRQ_SPI, 7);
+	ipic_set_priority(MPC83xx_IRQ_RTC_SEC, 0);
+	ipic_set_priority(MPC83xx_IRQ_PIT, 1);
+	ipic_set_priority(MPC83xx_IRQ_PCI1, 2);
+	ipic_set_priority(MPC83xx_IRQ_PCI2, 3);
+	ipic_set_priority(MPC83xx_IRQ_EXT0, 4);
+	ipic_set_priority(MPC83xx_IRQ_EXT1, 5);
+	ipic_set_priority(MPC83xx_IRQ_EXT2, 6);
+	ipic_set_priority(MPC83xx_IRQ_EXT3, 7);
+	ipic_set_priority(MPC83xx_IRQ_RTC_ALR, 0);
+	ipic_set_priority(MPC83xx_IRQ_MU, 1);
+	ipic_set_priority(MPC83xx_IRQ_SBA, 2);
+	ipic_set_priority(MPC83xx_IRQ_DMA, 3);
+	ipic_set_priority(MPC83xx_IRQ_EXT4, 4);
+	ipic_set_priority(MPC83xx_IRQ_EXT5, 5);
+	ipic_set_priority(MPC83xx_IRQ_EXT6, 6);
+	ipic_set_priority(MPC83xx_IRQ_EXT7, 7);
+}
+
+void ipic_enable_mcp(enum ipic_mcp_irq mcp_irq)
+{
+	struct ipic *ipic = primary_ipic;
+	u32 temp;
+
+	temp = ipic_read(ipic->regs, IPIC_SERMR);
+	temp |= (1 << (31 - mcp_irq));
+	ipic_write(ipic->regs, IPIC_SERMR, temp);
+}
+
+void ipic_disable_mcp(enum ipic_mcp_irq mcp_irq)
+{
+	struct ipic *ipic = primary_ipic;
+	u32 temp;
+
+	temp = ipic_read(ipic->regs, IPIC_SERMR);
+	temp &= (1 << (31 - mcp_irq));
+	ipic_write(ipic->regs, IPIC_SERMR, temp);
+}
+
+u32 ipic_get_mcp_status(void)
+{
+	return ipic_read(primary_ipic->regs, IPIC_SERMR);
+}
+
+void ipic_clear_mcp_status(u32 mask)
+{
+	ipic_write(primary_ipic->regs, IPIC_SERMR, mask);
+}
+
+/* Return an interrupt vector or -1 if no interrupt is pending. */
+int ipic_get_irq(struct pt_regs *regs)
+{
+	int irq;
+
+	irq = ipic_read(primary_ipic->regs, IPIC_SIVCR) & 0x7f;
+
+	if (irq == 0)    /* 0 --> no irq is pending */
+		irq = -1;
+
+	return irq;
+}
+
+static struct sysdev_class ipic_sysclass = {
+	set_kset_name("ipic"),
+};
+
+static struct sys_device device_ipic = {
+	.id		= 0,
+	.cls		= &ipic_sysclass,
+};
+
+static int __init init_ipic_sysfs(void)
+{
+	int rc;
+
+	if (!primary_ipic->regs)
+		return -ENODEV;
+	printk(KERN_DEBUG "Registering ipic with sysfs...\n");
+
+	rc = sysdev_class_register(&ipic_sysclass);
+	if (rc) {
+		printk(KERN_ERR "Failed registering ipic sys class\n");
+		return -ENODEV;
+	}
+	rc = sysdev_register(&device_ipic);
+	if (rc) {
+		printk(KERN_ERR "Failed registering ipic sys device\n");
+		return -ENODEV;
+	}
+	return 0;
+}
+
+subsys_initcall(init_ipic_sysfs);
diff --git a/arch/ppc/syslib/ipic.h b/arch/ppc/syslib/ipic.h
new file mode 100644
index 000000000000..2b56a4fcf373
--- /dev/null
+++ b/arch/ppc/syslib/ipic.h
@@ -0,0 +1,49 @@
+/*
+ * arch/ppc/kernel/ipic.h
+ *
+ * IPIC private definitions and structure.
+ *
+ * Maintainer: Kumar Gala <kumar.gala@freescale.com>
+ *
+ * Copyright 2005 Freescale Semiconductor, Inc
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+#ifndef __IPIC_H__
+#define __IPIC_H__
+
+#include <asm/ipic.h>
+
+#define MPC83xx_IPIC_SIZE	(0x00100)
+
+/* System Global Interrupt Configuration Register */
+#define	SICFR_IPSA	0x00010000
+#define	SICFR_IPSD	0x00080000
+#define	SICFR_MPSA	0x00200000
+#define	SICFR_MPSB	0x00400000
+
+/* System External Interrupt Mask Register */
+#define	SEMSR_SIRQ0	0x00008000
+
+/* System Error Control Register */
+#define SERCR_MCPR	0x00000001
+
+struct ipic {
+	volatile u32 __iomem	*regs;
+	unsigned int		irq_offset;
+};
+
+struct ipic_info {
+	u8	pend;		/* pending register offset from base */
+	u8	mask;		/* mask register offset from base */
+	u8	prio;		/* priority register offset from base */
+	u8	force;		/* force register offset from base */
+	u8	bit;		/* register bit position (as per doc)
+				   bit mask = 1 << (31 - bit) */
+	u8	prio_mask;	/* priority mask value */
+};
+
+#endif /* __IPIC_H__ */
diff --git a/arch/ppc/syslib/m8260_pci.c b/arch/ppc/syslib/m8260_pci.c
new file mode 100644
index 000000000000..bd564fb35ab6
--- /dev/null
+++ b/arch/ppc/syslib/m8260_pci.c
@@ -0,0 +1,194 @@
+/*
+ * (C) Copyright 2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2004 Red Hat, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+
+#include <asm/byteorder.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+#include <asm/machdep.h>
+#include <asm/pci-bridge.h>
+#include <asm/immap_cpm2.h>
+#include <asm/mpc8260.h>
+
+#include "m8260_pci.h"
+
+
+/* PCI bus configuration registers.
+ */
+
+static void __init m8260_setup_pci(struct pci_controller *hose)
+{
+	volatile cpm2_map_t *immap = cpm2_immr;
+	unsigned long pocmr;
+	u16 tempShort;
+
+#ifndef CONFIG_ATC 	/* already done in U-Boot */
+	/* 
+	 * Setting required to enable IRQ1-IRQ7 (SIUMCR [DPPC]), 
+	 * and local bus for PCI (SIUMCR [LBPC]).
+	 */
+	immap->im_siu_conf.siu_82xx.sc_siumcr = 0x00640000;
+#endif
+
+	/* Make PCI lowest priority */
+	/* Each 4 bits is a device bus request  and the MS 4bits 
+	   is highest priority */
+	/* Bus               4bit value 
+	   ---               ----------
+	   CPM high          0b0000
+	   CPM middle        0b0001
+	   CPM low           0b0010
+	   PCI reguest       0b0011
+	   Reserved          0b0100
+	   Reserved          0b0101
+	   Internal Core     0b0110
+	   External Master 1 0b0111
+	   External Master 2 0b1000
+	   External Master 3 0b1001
+	   The rest are reserved */
+	immap->im_siu_conf.siu_82xx.sc_ppc_alrh = 0x61207893;
+
+	/* Park bus on core while modifying PCI Bus accesses */
+	immap->im_siu_conf.siu_82xx.sc_ppc_acr = 0x6;
+
+	/* 
+	 * Set up master window that allows the CPU to access PCI space. This 
+	 * window is set up using the first SIU PCIBR registers.
+	 */
+	immap->im_memctl.memc_pcimsk0 = MPC826x_PCI_MASK;
+	immap->im_memctl.memc_pcibr0 =	MPC826x_PCI_BASE | PCIBR_ENABLE;
+
+	/* Disable machine check on no response or target abort */
+	immap->im_pci.pci_emr = cpu_to_le32(0x1fe7);
+	/* Release PCI RST (by default the PCI RST signal is held low)  */
+	immap->im_pci.pci_gcr = cpu_to_le32(PCIGCR_PCI_BUS_EN);
+
+	/* give it some time */
+	mdelay(1);
+
+	/* 
+	 * Set up master window that allows the CPU to access PCI Memory (prefetch) 
+	 * space. This window is set up using the first set of Outbound ATU registers.
+	 */
+	immap->im_pci.pci_potar0 = cpu_to_le32(MPC826x_PCI_LOWER_MEM >> 12);
+	immap->im_pci.pci_pobar0 = cpu_to_le32((MPC826x_PCI_LOWER_MEM - MPC826x_PCI_MEM_OFFSET) >> 12);
+	pocmr = ((MPC826x_PCI_UPPER_MEM - MPC826x_PCI_LOWER_MEM) >> 12) ^ 0xfffff;
+	immap->im_pci.pci_pocmr0 = cpu_to_le32(pocmr | POCMR_ENABLE | POCMR_PREFETCH_EN);
+
+	/* 
+	 * Set up master window that allows the CPU to access PCI Memory (non-prefetch) 
+	 * space. This window is set up using the second set of Outbound ATU registers.
+	 */
+	immap->im_pci.pci_potar1 = cpu_to_le32(MPC826x_PCI_LOWER_MMIO >> 12);
+	immap->im_pci.pci_pobar1 = cpu_to_le32((MPC826x_PCI_LOWER_MMIO - MPC826x_PCI_MMIO_OFFSET) >> 12);
+	pocmr = ((MPC826x_PCI_UPPER_MMIO - MPC826x_PCI_LOWER_MMIO) >> 12) ^ 0xfffff;
+	immap->im_pci.pci_pocmr1 = cpu_to_le32(pocmr | POCMR_ENABLE);
+
+	/* 
+	 * Set up master window that allows the CPU to access PCI IO space. This window
+	 * is set up using the third set of Outbound ATU registers.
+	 */
+	immap->im_pci.pci_potar2 = cpu_to_le32(MPC826x_PCI_IO_BASE >> 12);
+	immap->im_pci.pci_pobar2 = cpu_to_le32(MPC826x_PCI_LOWER_IO >> 12);
+	pocmr = ((MPC826x_PCI_UPPER_IO - MPC826x_PCI_LOWER_IO) >> 12) ^ 0xfffff;
+	immap->im_pci.pci_pocmr2 = cpu_to_le32(pocmr | POCMR_ENABLE | POCMR_PCI_IO);
+
+	/* 
+	 * Set up slave window that allows PCI masters to access MPC826x local memory. 
+	 * This window is set up using the first set of Inbound ATU registers
+	 */
+
+	immap->im_pci.pci_pitar0 = cpu_to_le32(MPC826x_PCI_SLAVE_MEM_LOCAL >> 12);
+	immap->im_pci.pci_pibar0 = cpu_to_le32(MPC826x_PCI_SLAVE_MEM_BUS >> 12);
+	pocmr = ((MPC826x_PCI_SLAVE_MEM_SIZE-1) >> 12) ^ 0xfffff;
+	immap->im_pci.pci_picmr0 = cpu_to_le32(pocmr | PICMR_ENABLE | PICMR_PREFETCH_EN);
+
+	/* See above for description - puts PCI request as highest priority */
+	immap->im_siu_conf.siu_82xx.sc_ppc_alrh = 0x03124567;
+
+	/* Park the bus on the PCI */
+	immap->im_siu_conf.siu_82xx.sc_ppc_acr = PPC_ACR_BUS_PARK_PCI;
+
+	/* Host mode - specify the bridge as a host-PCI bridge */
+	early_write_config_word(hose, 0, 0, PCI_CLASS_DEVICE, PCI_CLASS_BRIDGE_HOST);
+
+	/* Enable the host bridge to be a master on the PCI bus, and to act as a PCI memory target */
+	early_read_config_word(hose, 0, 0, PCI_COMMAND, &tempShort);
+	early_write_config_word(hose, 0, 0, PCI_COMMAND,
+				tempShort | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
+}
+
+void __init m8260_find_bridges(void)
+{
+	extern int pci_assign_all_busses;
+	struct pci_controller * hose;
+
+	pci_assign_all_busses = 1;
+
+	hose = pcibios_alloc_controller();
+
+	if (!hose)
+		return;
+
+	ppc_md.pci_swizzle = common_swizzle;
+
+	hose->first_busno = 0;
+	hose->bus_offset = 0;
+	hose->last_busno = 0xff;
+
+	setup_m8260_indirect_pci(hose, 
+				 (unsigned long)&cpm2_immr->im_pci.pci_cfg_addr,
+				 (unsigned long)&cpm2_immr->im_pci.pci_cfg_data);
+
+	m8260_setup_pci(hose);
+        hose->pci_mem_offset = MPC826x_PCI_MEM_OFFSET;
+
+        isa_io_base =
+                (unsigned long) ioremap(MPC826x_PCI_IO_BASE,
+                                        MPC826x_PCI_IO_SIZE);
+        hose->io_base_virt = (void *) isa_io_base;
+ 
+        /* setup resources */
+        pci_init_resource(&hose->mem_resources[0],
+			  MPC826x_PCI_LOWER_MEM,
+			  MPC826x_PCI_UPPER_MEM,
+			  IORESOURCE_MEM|IORESOURCE_PREFETCH, "PCI prefetchable memory");
+
+        pci_init_resource(&hose->mem_resources[1],
+			  MPC826x_PCI_LOWER_MMIO,
+			  MPC826x_PCI_UPPER_MMIO,
+			  IORESOURCE_MEM, "PCI memory");
+
+        pci_init_resource(&hose->io_resource,
+			  MPC826x_PCI_LOWER_IO,
+			  MPC826x_PCI_UPPER_IO,
+			  IORESOURCE_IO, "PCI I/O");
+}
diff --git a/arch/ppc/syslib/m8260_pci.h b/arch/ppc/syslib/m8260_pci.h
new file mode 100644
index 000000000000..d1352120acd7
--- /dev/null
+++ b/arch/ppc/syslib/m8260_pci.h
@@ -0,0 +1,76 @@
+
+#ifndef _PPC_KERNEL_M8260_PCI_H
+#define _PPC_KERNEL_M8260_PCI_H
+
+#include <asm/m8260_pci.h>
+
+/*
+ *   Local->PCI map (from CPU)                             controlled by
+ *   MPC826x master window
+ *
+ *   0x80000000 - 0xBFFFFFFF    Total CPU2PCI space        PCIBR0
+ *                       
+ *   0x80000000 - 0x9FFFFFFF    PCI Mem with prefetch      (Outbound ATU #1)
+ *   0xA0000000 - 0xAFFFFFFF    PCI Mem w/o  prefetch      (Outbound ATU #2)
+ *   0xB0000000 - 0xB0FFFFFF    32-bit PCI IO              (Outbound ATU #3)
+ *                      
+ *   PCI->Local map (from PCI)
+ *   MPC826x slave window                                  controlled by
+ *
+ *   0x00000000 - 0x07FFFFFF    MPC826x local memory       (Inbound ATU #1)
+ */
+
+/* 
+ * Slave window that allows PCI masters to access MPC826x local memory. 
+ * This window is set up using the first set of Inbound ATU registers
+ */
+
+#ifndef MPC826x_PCI_SLAVE_MEM_LOCAL
+#define MPC826x_PCI_SLAVE_MEM_LOCAL	(((struct bd_info *)__res)->bi_memstart)
+#define MPC826x_PCI_SLAVE_MEM_BUS	(((struct bd_info *)__res)->bi_memstart)
+#define MPC826x_PCI_SLAVE_MEM_SIZE	(((struct bd_info *)__res)->bi_memsize)
+#endif
+
+/* 
+ * This is the window that allows the CPU to access PCI address space.
+ * It will be setup with the SIU PCIBR0 register. All three PCI master
+ * windows, which allow the CPU to access PCI prefetch, non prefetch,
+ * and IO space (see below), must all fit within this window. 
+ */
+#ifndef MPC826x_PCI_BASE
+#define MPC826x_PCI_BASE	0x80000000
+#define MPC826x_PCI_MASK	0xc0000000
+#endif
+
+#ifndef MPC826x_PCI_LOWER_MEM
+#define MPC826x_PCI_LOWER_MEM  0x80000000
+#define MPC826x_PCI_UPPER_MEM  0x9fffffff
+#define MPC826x_PCI_MEM_OFFSET 0x00000000
+#endif
+
+#ifndef MPC826x_PCI_LOWER_MMIO
+#define MPC826x_PCI_LOWER_MMIO  0xa0000000
+#define MPC826x_PCI_UPPER_MMIO  0xafffffff
+#define MPC826x_PCI_MMIO_OFFSET 0x00000000
+#endif
+
+#ifndef MPC826x_PCI_LOWER_IO
+#define MPC826x_PCI_LOWER_IO   0x00000000
+#define MPC826x_PCI_UPPER_IO   0x00ffffff
+#define MPC826x_PCI_IO_BASE    0xb0000000
+#define MPC826x_PCI_IO_SIZE    0x01000000
+#endif
+
+#ifndef _IO_BASE
+#define _IO_BASE isa_io_base
+#endif
+
+#ifdef CONFIG_8260_PCI9
+struct pci_controller;
+extern void setup_m8260_indirect_pci(struct pci_controller* hose,
+				     u32 cfg_addr, u32 cfg_data);
+#else
+#define setup_m8260_indirect_pci setup_indirect_pci
+#endif
+
+#endif /* _PPC_KERNEL_M8260_PCI_H */
diff --git a/arch/ppc/syslib/m8260_pci_erratum9.c b/arch/ppc/syslib/m8260_pci_erratum9.c
new file mode 100644
index 000000000000..9c0582d639e0
--- /dev/null
+++ b/arch/ppc/syslib/m8260_pci_erratum9.c
@@ -0,0 +1,473 @@
+/*
+ * arch/ppc/platforms/mpc8260_pci9.c
+ *
+ * Workaround for device erratum PCI 9.
+ * See Motorola's "XPC826xA Family Device Errata Reference."
+ * The erratum applies to all 8260 family Hip4 processors.  It is scheduled 
+ * to be fixed in HiP4 Rev C.  Erratum PCI 9 states that a simultaneous PCI 
+ * inbound write transaction and PCI outbound read transaction can result in a 
+ * bus deadlock.  The suggested workaround is to use the IDMA controller to 
+ * perform all reads from PCI configuration, memory, and I/O space.
+ *
+ * Author:  andy_lowe@mvista.com
+ *
+ * 2003 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <linux/kernel.h>
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/types.h>
+#include <linux/string.h>
+
+#include <asm/io.h>
+#include <asm/pci-bridge.h>
+#include <asm/machdep.h>
+#include <asm/byteorder.h>
+#include <asm/mpc8260.h>
+#include <asm/immap_cpm2.h>
+#include <asm/cpm2.h>
+
+#include "m8260_pci.h"
+
+#ifdef CONFIG_8260_PCI9
+/*#include <asm/mpc8260_pci9.h>*/ /* included in asm/io.h */
+
+#define IDMA_XFER_BUF_SIZE 64	/* size of the IDMA transfer buffer */
+
+/* define a structure for the IDMA dpram usage */
+typedef struct idma_dpram_s {
+	idma_t pram;				/* IDMA parameter RAM */
+	u_char xfer_buf[IDMA_XFER_BUF_SIZE];	/* IDMA transfer buffer */
+	idma_bd_t bd;				/* buffer descriptor */
+} idma_dpram_t;
+
+/* define offsets relative to start of IDMA dpram */
+#define IDMA_XFER_BUF_OFFSET (sizeof(idma_t))
+#define IDMA_BD_OFFSET (sizeof(idma_t) + IDMA_XFER_BUF_SIZE)
+
+/* define globals */
+static volatile idma_dpram_t *idma_dpram;
+
+/* Exactly one of CONFIG_8260_PCI9_IDMAn must be defined, 
+ * where n is 1, 2, 3, or 4.  This selects the IDMA channel used for 
+ * the PCI9 workaround.
+ */
+#ifdef CONFIG_8260_PCI9_IDMA1
+#define IDMA_CHAN 0
+#define PROFF_IDMA PROFF_IDMA1_BASE
+#define IDMA_PAGE CPM_CR_IDMA1_PAGE
+#define IDMA_SBLOCK CPM_CR_IDMA1_SBLOCK
+#endif
+#ifdef CONFIG_8260_PCI9_IDMA2
+#define IDMA_CHAN 1
+#define PROFF_IDMA PROFF_IDMA2_BASE
+#define IDMA_PAGE CPM_CR_IDMA2_PAGE
+#define IDMA_SBLOCK CPM_CR_IDMA2_SBLOCK
+#endif
+#ifdef CONFIG_8260_PCI9_IDMA3
+#define IDMA_CHAN 2
+#define PROFF_IDMA PROFF_IDMA3_BASE
+#define IDMA_PAGE CPM_CR_IDMA3_PAGE
+#define IDMA_SBLOCK CPM_CR_IDMA3_SBLOCK
+#endif
+#ifdef CONFIG_8260_PCI9_IDMA4
+#define IDMA_CHAN 3
+#define PROFF_IDMA PROFF_IDMA4_BASE
+#define IDMA_PAGE CPM_CR_IDMA4_PAGE
+#define IDMA_SBLOCK CPM_CR_IDMA4_SBLOCK
+#endif
+
+void idma_pci9_init(void)
+{
+	uint dpram_offset;
+	volatile idma_t *pram;
+	volatile im_idma_t *idma_reg;
+	volatile cpm2_map_t *immap = cpm2_immr;
+
+	/* allocate IDMA dpram */
+	dpram_offset = cpm_dpalloc(sizeof(idma_dpram_t), 64);
+	idma_dpram = cpm_dpram_addr(dpram_offset); 
+
+	/* initialize the IDMA parameter RAM */
+	memset((void *)idma_dpram, 0, sizeof(idma_dpram_t));
+	pram = &idma_dpram->pram;
+	pram->ibase = dpram_offset + IDMA_BD_OFFSET;
+	pram->dpr_buf = dpram_offset + IDMA_XFER_BUF_OFFSET;
+	pram->ss_max = 32;
+	pram->dts = 32;
+
+	/* initialize the IDMA_BASE pointer to the IDMA parameter RAM */
+	*((ushort *) &immap->im_dprambase[PROFF_IDMA]) = dpram_offset;
+
+	/* initialize the IDMA registers */
+	idma_reg = (volatile im_idma_t *) &immap->im_sdma.sdma_idsr1;
+	idma_reg[IDMA_CHAN].idmr = 0;		/* mask all IDMA interrupts */
+	idma_reg[IDMA_CHAN].idsr = 0xff;	/* clear all event flags */
+
+	printk("<4>Using IDMA%d for MPC8260 device erratum PCI 9 workaround\n",
+		IDMA_CHAN + 1);
+
+	return;
+}
+
+/* Use the IDMA controller to transfer data from I/O memory to local RAM.
+ * The src address must be a physical address suitable for use by the DMA 
+ * controller with no translation.  The dst address must be a kernel virtual 
+ * address.  The dst address is translated to a physical address via 
+ * virt_to_phys().
+ * The sinc argument specifies whether or not the source address is incremented
+ * by the DMA controller.  The source address is incremented if and only if sinc
+ * is non-zero.  The destination address is always incremented since the 
+ * destination is always host RAM.
+ */
+static void 
+idma_pci9_read(u8 *dst, u8 *src, int bytes, int unit_size, int sinc)
+{
+	unsigned long flags;
+	volatile idma_t *pram = &idma_dpram->pram;
+	volatile idma_bd_t *bd = &idma_dpram->bd;
+	volatile cpm2_map_t *immap = cpm2_immr;
+
+	local_irq_save(flags);
+
+	/* initialize IDMA parameter RAM for this transfer */
+	if (sinc)
+		pram->dcm = IDMA_DCM_DMA_WRAP_64 | IDMA_DCM_SINC
+			  | IDMA_DCM_DINC | IDMA_DCM_SD_MEM2MEM;
+	else
+		pram->dcm = IDMA_DCM_DMA_WRAP_64 | IDMA_DCM_DINC 
+			  | IDMA_DCM_SD_MEM2MEM;
+	pram->ibdptr = pram->ibase;
+	pram->sts = unit_size;
+	pram->istate = 0;
+
+	/* initialize the buffer descriptor */
+	bd->dst = virt_to_phys(dst);
+	bd->src = (uint) src;
+	bd->len = bytes;
+	bd->flags = IDMA_BD_V | IDMA_BD_W | IDMA_BD_I | IDMA_BD_L | IDMA_BD_DGBL
+		  | IDMA_BD_DBO_BE | IDMA_BD_SBO_BE | IDMA_BD_SDTB;
+
+	/* issue the START_IDMA command to the CP */
+	while (immap->im_cpm.cp_cpcr & CPM_CR_FLG);
+	immap->im_cpm.cp_cpcr = mk_cr_cmd(IDMA_PAGE, IDMA_SBLOCK, 0,
+					 CPM_CR_START_IDMA) | CPM_CR_FLG;
+	while (immap->im_cpm.cp_cpcr & CPM_CR_FLG);
+
+	/* wait for transfer to complete */
+	while(bd->flags & IDMA_BD_V);
+
+	local_irq_restore(flags);
+
+	return;
+}
+
+/* Use the IDMA controller to transfer data from I/O memory to local RAM.
+ * The dst address must be a physical address suitable for use by the DMA 
+ * controller with no translation.  The src address must be a kernel virtual 
+ * address.  The src address is translated to a physical address via 
+ * virt_to_phys().
+ * The dinc argument specifies whether or not the dest address is incremented
+ * by the DMA controller.  The source address is incremented if and only if sinc
+ * is non-zero.  The source address is always incremented since the 
+ * source is always host RAM.
+ */
+static void 
+idma_pci9_write(u8 *dst, u8 *src, int bytes, int unit_size, int dinc)
+{
+	unsigned long flags;
+	volatile idma_t *pram = &idma_dpram->pram;
+	volatile idma_bd_t *bd = &idma_dpram->bd;
+	volatile cpm2_map_t *immap = cpm2_immr;
+
+	local_irq_save(flags);
+
+	/* initialize IDMA parameter RAM for this transfer */
+	if (dinc)
+		pram->dcm = IDMA_DCM_DMA_WRAP_64 | IDMA_DCM_SINC
+			  | IDMA_DCM_DINC | IDMA_DCM_SD_MEM2MEM;
+	else
+		pram->dcm = IDMA_DCM_DMA_WRAP_64 | IDMA_DCM_SINC 
+			  | IDMA_DCM_SD_MEM2MEM;
+	pram->ibdptr = pram->ibase;
+	pram->sts = unit_size;
+	pram->istate = 0;
+
+	/* initialize the buffer descriptor */
+	bd->dst = (uint) dst;
+	bd->src = virt_to_phys(src);
+	bd->len = bytes;
+	bd->flags = IDMA_BD_V | IDMA_BD_W | IDMA_BD_I | IDMA_BD_L | IDMA_BD_DGBL
+		  | IDMA_BD_DBO_BE | IDMA_BD_SBO_BE | IDMA_BD_SDTB;
+
+	/* issue the START_IDMA command to the CP */
+	while (immap->im_cpm.cp_cpcr & CPM_CR_FLG);
+	immap->im_cpm.cp_cpcr = mk_cr_cmd(IDMA_PAGE, IDMA_SBLOCK, 0,
+					 CPM_CR_START_IDMA) | CPM_CR_FLG;
+	while (immap->im_cpm.cp_cpcr & CPM_CR_FLG);
+
+	/* wait for transfer to complete */
+	while(bd->flags & IDMA_BD_V);
+
+	local_irq_restore(flags);
+
+	return;
+}
+
+/* Same as idma_pci9_read, but 16-bit little-endian byte swapping is performed
+ * if the unit_size is 2, and 32-bit little-endian byte swapping is performed if
+ * the unit_size is 4.
+ */
+static void 
+idma_pci9_read_le(u8 *dst, u8 *src, int bytes, int unit_size, int sinc)
+{
+	int i;
+	u8 *p;
+
+	idma_pci9_read(dst, src, bytes, unit_size, sinc);
+	switch(unit_size) {
+		case 2:
+			for (i = 0, p = dst; i < bytes; i += 2, p += 2)
+				swab16s((u16 *) p);
+			break;
+		case 4:
+			for (i = 0, p = dst; i < bytes; i += 4, p += 4)
+				swab32s((u32 *) p);
+			break;
+		default:
+			break;
+	}
+}
+EXPORT_SYMBOL(idma_pci9_init);
+EXPORT_SYMBOL(idma_pci9_read);
+EXPORT_SYMBOL(idma_pci9_read_le);
+
+static inline int is_pci_mem(unsigned long addr)
+{
+	if (addr >= MPC826x_PCI_LOWER_MMIO &&
+	    addr <= MPC826x_PCI_UPPER_MMIO)
+		return 1;
+	if (addr >= MPC826x_PCI_LOWER_MEM &&
+	    addr <= MPC826x_PCI_UPPER_MEM)
+		return 1;
+	return 0;
+}
+
+#define is_pci_mem(pa) ( (pa > 0x80000000) && (pa < 0xc0000000))
+int readb(volatile unsigned char *addr)
+{
+	u8 val;
+	unsigned long pa = iopa((unsigned long) addr);
+
+	if (!is_pci_mem(pa))
+		return in_8(addr);
+
+	idma_pci9_read((u8 *)&val, (u8 *)pa, sizeof(val), sizeof(val), 0);
+	return val;
+}
+
+int readw(volatile unsigned short *addr)
+{
+	u16 val;
+	unsigned long pa = iopa((unsigned long) addr);
+
+	if (!is_pci_mem(pa))
+		return in_le16(addr);
+
+	idma_pci9_read((u8 *)&val, (u8 *)pa, sizeof(val), sizeof(val), 0);
+	return swab16(val);
+}
+
+unsigned readl(volatile unsigned *addr)
+{
+	u32 val;
+	unsigned long pa = iopa((unsigned long) addr);
+
+	if (!is_pci_mem(pa))
+		return in_le32(addr);
+
+	idma_pci9_read((u8 *)&val, (u8 *)pa, sizeof(val), sizeof(val), 0);
+	return swab32(val);
+}
+
+int inb(unsigned port)
+{
+	u8 val;
+	u8 *addr = (u8 *)(port + _IO_BASE);
+
+	idma_pci9_read((u8 *)&val, (u8 *)addr, sizeof(val), sizeof(val), 0);
+	return val;
+}
+
+int inw(unsigned port)
+{
+	u16 val;
+	u8 *addr = (u8 *)(port + _IO_BASE);
+
+	idma_pci9_read((u8 *)&val, (u8 *)addr, sizeof(val), sizeof(val), 0);
+	return swab16(val);
+}
+
+unsigned inl(unsigned port)
+{
+	u32 val;
+	u8 *addr = (u8 *)(port + _IO_BASE);
+
+	idma_pci9_read((u8 *)&val, (u8 *)addr, sizeof(val), sizeof(val), 0);
+	return swab32(val);
+}
+
+void insb(unsigned port, void *buf, int ns)
+{
+	u8 *addr = (u8 *)(port + _IO_BASE);
+
+	idma_pci9_read((u8 *)buf, (u8 *)addr, ns*sizeof(u8), sizeof(u8), 0);
+}
+
+void insw(unsigned port, void *buf, int ns)
+{
+	u8 *addr = (u8 *)(port + _IO_BASE);
+
+	idma_pci9_read((u8 *)buf, (u8 *)addr, ns*sizeof(u16), sizeof(u16), 0);
+}
+
+void insl(unsigned port, void *buf, int nl)
+{
+	u8 *addr = (u8 *)(port + _IO_BASE);
+
+	idma_pci9_read((u8 *)buf, (u8 *)addr, nl*sizeof(u32), sizeof(u32), 0);
+}
+
+void insw_ns(unsigned port, void *buf, int ns)
+{
+	u8 *addr = (u8 *)(port + _IO_BASE);
+
+	idma_pci9_read((u8 *)buf, (u8 *)addr, ns*sizeof(u16), sizeof(u16), 0);
+}
+
+void insl_ns(unsigned port, void *buf, int nl)
+{
+	u8 *addr = (u8 *)(port + _IO_BASE);
+
+	idma_pci9_read((u8 *)buf, (u8 *)addr, nl*sizeof(u32), sizeof(u32), 0);
+}
+
+void *memcpy_fromio(void *dest, unsigned long src, size_t count)
+{
+	unsigned long pa = iopa((unsigned long) src);
+
+	if (is_pci_mem(pa))
+		idma_pci9_read((u8 *)dest, (u8 *)pa, count, 32, 1);
+	else
+		memcpy(dest, (void *)src, count);
+	return dest;
+}
+
+EXPORT_SYMBOL(readb);
+EXPORT_SYMBOL(readw);
+EXPORT_SYMBOL(readl);
+EXPORT_SYMBOL(inb);
+EXPORT_SYMBOL(inw);
+EXPORT_SYMBOL(inl);
+EXPORT_SYMBOL(insb);
+EXPORT_SYMBOL(insw);
+EXPORT_SYMBOL(insl);
+EXPORT_SYMBOL(insw_ns);
+EXPORT_SYMBOL(insl_ns);
+EXPORT_SYMBOL(memcpy_fromio);
+
+#endif	/* ifdef CONFIG_8260_PCI9 */
+
+/* Indirect PCI routines adapted from arch/ppc/kernel/indirect_pci.c.
+ * Copyright (C) 1998 Gabriel Paubert.
+ */
+#ifndef CONFIG_8260_PCI9
+#define cfg_read(val, addr, type, op)	*val = op((type)(addr))
+#else
+#define cfg_read(val, addr, type, op) \
+	idma_pci9_read_le((u8*)(val),(u8*)(addr),sizeof(*(val)),sizeof(*(val)),0)
+#endif
+
+#define cfg_write(val, addr, type, op)	op((type *)(addr), (val))
+
+static int indirect_write_config(struct pci_bus *pbus, unsigned int devfn, int where,
+			 int size, u32 value)
+{
+	struct pci_controller *hose = pbus->sysdata;
+	u8 cfg_type = 0;
+	if (ppc_md.pci_exclude_device)
+		if (ppc_md.pci_exclude_device(pbus->number, devfn))
+			return PCIBIOS_DEVICE_NOT_FOUND;
+
+	if (hose->set_cfg_type)
+		if (pbus->number != hose->first_busno)
+			cfg_type = 1;
+
+	out_be32(hose->cfg_addr,
+		 (((where & 0xfc) | cfg_type) << 24) | (devfn << 16)
+		 | ((pbus->number - hose->bus_offset) << 8) | 0x80);
+
+	switch (size)
+	{
+		case 1:
+			cfg_write(value, hose->cfg_data + (where & 3), u8, out_8);
+			break;
+		case 2:
+			cfg_write(value, hose->cfg_data + (where & 2), u16, out_le16);
+			break;
+		case 4:
+			cfg_write(value, hose->cfg_data + (where & 0), u32, out_le32);
+			break;
+	}		
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int indirect_read_config(struct pci_bus *pbus, unsigned int devfn, int where,
+			 int size, u32 *value)
+{
+	struct pci_controller *hose = pbus->sysdata;
+	u8 cfg_type = 0;
+	if (ppc_md.pci_exclude_device)
+		if (ppc_md.pci_exclude_device(pbus->number, devfn))
+			return PCIBIOS_DEVICE_NOT_FOUND;
+
+	if (hose->set_cfg_type)
+		if (pbus->number != hose->first_busno)
+			cfg_type = 1;
+
+	out_be32(hose->cfg_addr,
+		 (((where & 0xfc) | cfg_type) << 24) | (devfn << 16)
+		 | ((pbus->number - hose->bus_offset) << 8) | 0x80);
+
+	switch (size)
+	{
+		case 1:
+			cfg_read(value, hose->cfg_data + (where & 3), u8 *, in_8);
+			break;
+		case 2:
+			cfg_read(value, hose->cfg_data + (where & 2), u16 *, in_le16);
+			break;
+		case 4:
+			cfg_read(value, hose->cfg_data + (where & 0), u32 *, in_le32);
+			break;
+	}		
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static struct pci_ops indirect_pci_ops =
+{
+	.read = indirect_read_config,
+	.write = indirect_write_config,
+};
+
+void
+setup_m8260_indirect_pci(struct pci_controller* hose, u32 cfg_addr, u32 cfg_data)
+{
+	hose->ops = &indirect_pci_ops;
+	hose->cfg_addr = (unsigned int *) ioremap(cfg_addr, 4);
+	hose->cfg_data = (unsigned char *) ioremap(cfg_data, 4);
+}
diff --git a/arch/ppc/syslib/m8260_setup.c b/arch/ppc/syslib/m8260_setup.c
new file mode 100644
index 000000000000..23ea3f694de2
--- /dev/null
+++ b/arch/ppc/syslib/m8260_setup.c
@@ -0,0 +1,264 @@
+/*
+ *  arch/ppc/syslib/m8260_setup.c
+ *
+ *  Copyright (C) 1995  Linus Torvalds
+ *  Adapted from 'alpha' version by Gary Thomas
+ *  Modified by Cort Dougan (cort@cs.nmt.edu)
+ *  Modified for MBX using prep/chrp/pmac functions by Dan (dmalek@jlc.net)
+ *  Further modified for generic 8xx and 8260 by Dan.
+ */
+
+#include <linux/config.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/stddef.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/initrd.h>
+#include <linux/root_dev.h>
+#include <linux/seq_file.h>
+#include <linux/irq.h>
+
+#include <asm/mmu.h>
+#include <asm/io.h>
+#include <asm/pgtable.h>
+#include <asm/mpc8260.h>
+#include <asm/immap_cpm2.h>
+#include <asm/machdep.h>
+#include <asm/bootinfo.h>
+#include <asm/time.h>
+
+#include "cpm2_pic.h"
+
+unsigned char __res[sizeof(bd_t)];
+
+extern void cpm2_reset(void);
+extern void m8260_find_bridges(void);
+extern void idma_pci9_init(void);
+
+/* Place-holder for board-specific init */
+void __attribute__ ((weak)) __init
+m82xx_board_setup(void)
+{
+}
+
+static void __init
+m8260_setup_arch(void)
+{
+	/* Print out Vendor and Machine info. */
+	printk(KERN_INFO "%s %s port\n", CPUINFO_VENDOR, CPUINFO_MACHINE);
+
+	/* Reset the Communication Processor Module. */
+	cpm2_reset();
+#ifdef CONFIG_8260_PCI9
+	/* Initialise IDMA for PCI erratum workaround */
+	idma_pci9_init();
+#endif
+#ifdef CONFIG_PCI_8260
+	m8260_find_bridges();
+#endif
+#ifdef CONFIG_BLK_DEV_INITRD
+	if (initrd_start)
+		ROOT_DEV = Root_RAM0;
+#endif
+	m82xx_board_setup();
+}
+
+/* The decrementer counts at the system (internal) clock frequency
+ * divided by four.
+ */
+static void __init
+m8260_calibrate_decr(void)
+{
+	bd_t *binfo = (bd_t *)__res;
+	int freq, divisor;
+
+	freq = binfo->bi_busfreq;
+        divisor = 4;
+        tb_ticks_per_jiffy = freq / HZ / divisor;
+	tb_to_us = mulhwu_scale_factor(freq / divisor, 1000000);
+}
+
+/* The 8260 has an internal 1-second timer update register that
+ * we should use for this purpose.
+ */
+static uint rtc_time;
+
+static int
+m8260_set_rtc_time(unsigned long time)
+{
+	rtc_time = time;
+
+	return(0);
+}
+
+static unsigned long
+m8260_get_rtc_time(void)
+{
+	/* Get time from the RTC.
+	*/
+	return((unsigned long)rtc_time);
+}
+
+#ifndef BOOTROM_RESTART_ADDR
+#warning "Using default BOOTROM_RESTART_ADDR!"
+#define BOOTROM_RESTART_ADDR	0xff000104
+#endif
+
+static void
+m8260_restart(char *cmd)
+{
+	extern void m8260_gorom(bd_t *bi, uint addr);
+	uint	startaddr;
+
+	/* Most boot roms have a warmstart as the second instruction
+	 * of the reset vector.  If that doesn't work for you, change this
+	 * or the reboot program to send a proper address.
+	 */
+	startaddr = BOOTROM_RESTART_ADDR;
+	if (cmd != NULL) {
+		if (!strncmp(cmd, "startaddr=", 10))
+			startaddr = simple_strtoul(&cmd[10], NULL, 0);
+	}
+
+	m8260_gorom((void*)__pa(__res), startaddr);
+}
+
+static void
+m8260_halt(void)
+{
+	local_irq_disable();
+	while (1);
+}
+
+static void
+m8260_power_off(void)
+{
+	m8260_halt();
+}
+
+static int
+m8260_show_cpuinfo(struct seq_file *m)
+{
+	bd_t *bp = (bd_t *)__res;
+
+	seq_printf(m, "vendor\t\t: %s\n"
+		   "machine\t\t: %s\n"
+		   "\n"
+		   "mem size\t\t: 0x%08x\n"
+		   "console baud\t\t: %d\n"
+		   "\n"
+		   "core clock\t: %u MHz\n"
+		   "CPM  clock\t: %u MHz\n"
+		   "bus  clock\t: %u MHz\n",
+		   CPUINFO_VENDOR, CPUINFO_MACHINE, bp->bi_memsize,
+		   bp->bi_baudrate, bp->bi_intfreq / 1000000,
+		   bp->bi_cpmfreq / 1000000, bp->bi_busfreq / 1000000);
+	return 0;
+}
+
+/* Initialize the internal interrupt controller.  The number of
+ * interrupts supported can vary with the processor type, and the
+ * 8260 family can have up to 64.
+ * External interrupts can be either edge or level triggered, and
+ * need to be initialized by the appropriate driver.
+ */
+static void __init
+m8260_init_IRQ(void)
+{
+	cpm2_init_IRQ();
+
+	/* Initialize the default interrupt mapping priorities,
+	 * in case the boot rom changed something on us.
+	 */
+	cpm2_immr->im_intctl.ic_siprr = 0x05309770;
+}
+
+/*
+ * Same hack as 8xx
+ */
+static unsigned long __init
+m8260_find_end_of_memory(void)
+{
+	bd_t *binfo = (bd_t *)__res;
+
+	return binfo->bi_memsize;
+}
+
+/* Map the IMMR, plus anything else we can cover
+ * in that upper space according to the memory controller
+ * chip select mapping.  Grab another bunch of space
+ * below that for stuff we can't cover in the upper.
+ */
+static void __init
+m8260_map_io(void)
+{
+	uint addr;
+
+	/* Map IMMR region to a 256MB BAT */
+	addr = (cpm2_immr != NULL) ? (uint)cpm2_immr : CPM_MAP_ADDR;
+	io_block_mapping(addr, addr, 0x10000000, _PAGE_IO);
+
+	/* Map I/O region to a 256MB BAT */
+	io_block_mapping(IO_VIRT_ADDR, IO_PHYS_ADDR, 0x10000000, _PAGE_IO);
+}
+
+/* Place-holder for board-specific ppc_md hooking */
+void __attribute__ ((weak)) __init
+m82xx_board_init(void)
+{
+}
+
+/* Inputs:
+ *   r3 - Optional pointer to a board information structure.
+ *   r4 - Optional pointer to the physical starting address of the init RAM
+ *        disk.
+ *   r5 - Optional pointer to the physical ending address of the init RAM
+ *        disk.
+ *   r6 - Optional pointer to the physical starting address of any kernel
+ *        command-line parameters.
+ *   r7 - Optional pointer to the physical ending address of any kernel
+ *        command-line parameters.
+ */
+void __init
+platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
+	      unsigned long r6, unsigned long r7)
+{
+	parse_bootinfo(find_bootinfo());
+
+	if ( r3 )
+		memcpy( (void *)__res,(void *)(r3+KERNELBASE), sizeof(bd_t) );
+
+#ifdef CONFIG_BLK_DEV_INITRD
+	/* take care of initrd if we have one */
+	if ( r4 ) {
+		initrd_start = r4 + KERNELBASE;
+		initrd_end = r5 + KERNELBASE;
+	}
+#endif /* CONFIG_BLK_DEV_INITRD */
+	/* take care of cmd line */
+	if ( r6 ) {
+		*(char *)(r7+KERNELBASE) = 0;
+		strcpy(cmd_line, (char *)(r6+KERNELBASE));
+	}
+
+	ppc_md.setup_arch		= m8260_setup_arch;
+	ppc_md.show_cpuinfo		= m8260_show_cpuinfo;
+	ppc_md.init_IRQ			= m8260_init_IRQ;
+	ppc_md.get_irq			= cpm2_get_irq;
+
+	ppc_md.restart			= m8260_restart;
+	ppc_md.power_off		= m8260_power_off;
+	ppc_md.halt			= m8260_halt;
+
+	ppc_md.set_rtc_time		= m8260_set_rtc_time;
+	ppc_md.get_rtc_time		= m8260_get_rtc_time;
+	ppc_md.calibrate_decr		= m8260_calibrate_decr;
+
+	ppc_md.find_end_of_memory	= m8260_find_end_of_memory;
+	ppc_md.setup_io_mappings	= m8260_map_io;
+
+	/* Call back for board-specific settings and overrides. */
+	m82xx_board_init();
+}
diff --git a/arch/ppc/syslib/m8xx_setup.c b/arch/ppc/syslib/m8xx_setup.c
new file mode 100644
index 000000000000..c1db2ab1d154
--- /dev/null
+++ b/arch/ppc/syslib/m8xx_setup.c
@@ -0,0 +1,433 @@
+/*
+ *  arch/ppc/kernel/setup.c
+ *
+ *  Copyright (C) 1995  Linus Torvalds
+ *  Adapted from 'alpha' version by Gary Thomas
+ *  Modified by Cort Dougan (cort@cs.nmt.edu)
+ *  Modified for MBX using prep/chrp/pmac functions by Dan (dmalek@jlc.net)
+ *  Further modified for generic 8xx by Dan.
+ */
+
+/*
+ * bootup setup stuff..
+ */
+
+#include <linux/config.h>
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/stddef.h>
+#include <linux/unistd.h>
+#include <linux/ptrace.h>
+#include <linux/slab.h>
+#include <linux/user.h>
+#include <linux/a.out.h>
+#include <linux/tty.h>
+#include <linux/major.h>
+#include <linux/interrupt.h>
+#include <linux/reboot.h>
+#include <linux/init.h>
+#include <linux/initrd.h>
+#include <linux/ioport.h>
+#include <linux/bootmem.h>
+#include <linux/seq_file.h>
+#include <linux/root_dev.h>
+
+#include <asm/mmu.h>
+#include <asm/reg.h>
+#include <asm/residual.h>
+#include <asm/io.h>
+#include <asm/pgtable.h>
+#include <asm/mpc8xx.h>
+#include <asm/8xx_immap.h>
+#include <asm/machdep.h>
+#include <asm/bootinfo.h>
+#include <asm/time.h>
+#include <asm/xmon.h>
+
+#include "ppc8xx_pic.h"
+
+static int m8xx_set_rtc_time(unsigned long time);
+static unsigned long m8xx_get_rtc_time(void);
+void m8xx_calibrate_decr(void);
+
+unsigned char __res[sizeof(bd_t)];
+
+extern void m8xx_ide_init(void);
+
+extern unsigned long find_available_memory(void);
+extern void m8xx_cpm_reset(uint cpm_page);
+extern void m8xx_wdt_handler_install(bd_t *bp);
+extern void rpxfb_alloc_pages(void);
+extern void cpm_interrupt_init(void);
+
+void __attribute__ ((weak))
+board_init(void)
+{
+}
+
+void __init
+m8xx_setup_arch(void)
+{
+	int	cpm_page;
+
+	cpm_page = (int) alloc_bootmem_pages(PAGE_SIZE);
+
+	/* Reset the Communication Processor Module.
+	*/
+	m8xx_cpm_reset(cpm_page);
+
+#ifdef CONFIG_FB_RPX
+	rpxfb_alloc_pages();
+#endif
+
+#ifdef notdef
+	ROOT_DEV = Root_HDA1; /* hda1 */
+#endif
+
+#ifdef CONFIG_BLK_DEV_INITRD
+#if 0
+	ROOT_DEV = Root_FD0; /* floppy */
+	rd_prompt = 1;
+	rd_doload = 1;
+	rd_image_start = 0;
+#endif
+#if 0	/* XXX this may need to be updated for the new bootmem stuff,
+	   or possibly just deleted (see set_phys_avail() in init.c).
+	   - paulus. */
+	/* initrd_start and size are setup by boot/head.S and kernel/head.S */
+	if ( initrd_start )
+	{
+		if (initrd_end > *memory_end_p)
+		{
+			printk("initrd extends beyond end of memory "
+			       "(0x%08lx > 0x%08lx)\ndisabling initrd\n",
+			       initrd_end,*memory_end_p);
+			initrd_start = 0;
+		}
+	}
+#endif
+#endif
+	board_init();
+}
+
+void
+abort(void)
+{
+#ifdef CONFIG_XMON
+	xmon(0);
+#endif
+	machine_restart(NULL);
+
+	/* not reached */
+	for (;;);
+}
+
+/* A place holder for time base interrupts, if they are ever enabled. */
+irqreturn_t timebase_interrupt(int irq, void * dev, struct pt_regs * regs)
+{
+	printk ("timebase_interrupt()\n");
+
+	return IRQ_HANDLED;
+}
+
+static struct irqaction tbint_irqaction = {
+	.handler = timebase_interrupt,
+	.mask = CPU_MASK_NONE,
+	.name = "tbint",
+};
+
+/* The decrementer counts at the system (internal) clock frequency divided by
+ * sixteen, or external oscillator divided by four.  We force the processor
+ * to use system clock divided by sixteen.
+ */
+void __init m8xx_calibrate_decr(void)
+{
+	bd_t	*binfo = (bd_t *)__res;
+	int freq, fp, divisor;
+
+	/* Unlock the SCCR. */
+	((volatile immap_t *)IMAP_ADDR)->im_clkrstk.cark_sccrk = ~KAPWR_KEY;
+	((volatile immap_t *)IMAP_ADDR)->im_clkrstk.cark_sccrk = KAPWR_KEY;
+
+	/* Force all 8xx processors to use divide by 16 processor clock. */
+	((volatile immap_t *)IMAP_ADDR)->im_clkrst.car_sccr |= 0x02000000;
+
+	/* Processor frequency is MHz.
+	 * The value 'fp' is the number of decrementer ticks per second.
+	 */
+	fp = binfo->bi_intfreq / 16;
+	freq = fp*60;	/* try to make freq/1e6 an integer */
+        divisor = 60;
+        printk("Decrementer Frequency = %d/%d\n", freq, divisor);
+        tb_ticks_per_jiffy = freq / HZ / divisor;
+	tb_to_us = mulhwu_scale_factor(freq / divisor, 1000000);
+
+	/* Perform some more timer/timebase initialization.  This used
+	 * to be done elsewhere, but other changes caused it to get
+	 * called more than once....that is a bad thing.
+	 *
+	 * First, unlock all of the registers we are going to modify.
+	 * To protect them from corruption during power down, registers
+	 * that are maintained by keep alive power are "locked".  To
+	 * modify these registers we have to write the key value to
+	 * the key location associated with the register.
+	 * Some boards power up with these unlocked, while others
+	 * are locked.  Writing anything (including the unlock code?)
+	 * to the unlocked registers will lock them again.  So, here
+	 * we guarantee the registers are locked, then we unlock them
+	 * for our use.
+	 */
+	((volatile immap_t *)IMAP_ADDR)->im_sitk.sitk_tbscrk = ~KAPWR_KEY;
+	((volatile immap_t *)IMAP_ADDR)->im_sitk.sitk_rtcsck = ~KAPWR_KEY;
+	((volatile immap_t *)IMAP_ADDR)->im_sitk.sitk_tbk    = ~KAPWR_KEY;
+	((volatile immap_t *)IMAP_ADDR)->im_sitk.sitk_tbscrk =  KAPWR_KEY;
+	((volatile immap_t *)IMAP_ADDR)->im_sitk.sitk_rtcsck =  KAPWR_KEY;
+	((volatile immap_t *)IMAP_ADDR)->im_sitk.sitk_tbk    =  KAPWR_KEY;
+
+	/* Disable the RTC one second and alarm interrupts. */
+	((volatile immap_t *)IMAP_ADDR)->im_sit.sit_rtcsc &=
+						~(RTCSC_SIE | RTCSC_ALE);
+	/* Enable the RTC */
+	((volatile immap_t *)IMAP_ADDR)->im_sit.sit_rtcsc |=
+						(RTCSC_RTF | RTCSC_RTE);
+
+	/* Enabling the decrementer also enables the timebase interrupts
+	 * (or from the other point of view, to get decrementer interrupts
+	 * we have to enable the timebase).  The decrementer interrupt
+	 * is wired into the vector table, nothing to do here for that.
+	 */
+	((volatile immap_t *)IMAP_ADDR)->im_sit.sit_tbscr =
+				((mk_int_int_mask(DEC_INTERRUPT) << 8) |
+					 (TBSCR_TBF | TBSCR_TBE));
+
+	if (setup_irq(DEC_INTERRUPT, &tbint_irqaction))
+		panic("Could not allocate timer IRQ!");
+
+#ifdef CONFIG_8xx_WDT
+	/* Install watchdog timer handler early because it might be
+	 * already enabled by the bootloader
+	 */
+	m8xx_wdt_handler_install(binfo);
+#endif
+}
+
+/* The RTC on the MPC8xx is an internal register.
+ * We want to protect this during power down, so we need to unlock,
+ * modify, and re-lock.
+ */
+static int
+m8xx_set_rtc_time(unsigned long time)
+{
+	((volatile immap_t *)IMAP_ADDR)->im_sitk.sitk_rtck = KAPWR_KEY;
+	((volatile immap_t *)IMAP_ADDR)->im_sit.sit_rtc = time;
+	((volatile immap_t *)IMAP_ADDR)->im_sitk.sitk_rtck = ~KAPWR_KEY;
+	return(0);
+}
+
+static unsigned long
+m8xx_get_rtc_time(void)
+{
+	/* Get time from the RTC. */
+	return((unsigned long)(((immap_t *)IMAP_ADDR)->im_sit.sit_rtc));
+}
+
+static void
+m8xx_restart(char *cmd)
+{
+	__volatile__ unsigned char dummy;
+
+	local_irq_disable();
+	((immap_t *)IMAP_ADDR)->im_clkrst.car_plprcr |= 0x00000080;
+
+	/* Clear the ME bit in MSR to cause checkstop on machine check
+	*/
+	mtmsr(mfmsr() & ~0x1000);
+
+	dummy = ((immap_t *)IMAP_ADDR)->im_clkrst.res[0];
+	printk("Restart failed\n");
+	while(1);
+}
+
+static void
+m8xx_power_off(void)
+{
+   m8xx_restart(NULL);
+}
+
+static void
+m8xx_halt(void)
+{
+   m8xx_restart(NULL);
+}
+
+
+static int
+m8xx_show_percpuinfo(struct seq_file *m, int i)
+{
+	bd_t	*bp;
+
+	bp = (bd_t *)__res;
+
+	seq_printf(m, "clock\t\t: %ldMHz\n"
+		   "bus clock\t: %ldMHz\n",
+		   bp->bi_intfreq / 1000000,
+		   bp->bi_busfreq / 1000000);
+
+	return 0;
+}
+
+#ifdef CONFIG_PCI
+static struct irqaction mbx_i8259_irqaction = {
+	.handler = mbx_i8259_action,
+	.mask = CPU_MASK_NONE,
+	.name = "i8259 cascade",
+};
+#endif
+
+/* Initialize the internal interrupt controller.  The number of
+ * interrupts supported can vary with the processor type, and the
+ * 82xx family can have up to 64.
+ * External interrupts can be either edge or level triggered, and
+ * need to be initialized by the appropriate driver.
+ */
+static void __init
+m8xx_init_IRQ(void)
+{
+	int i;
+
+	for (i = SIU_IRQ_OFFSET ; i < SIU_IRQ_OFFSET + NR_SIU_INTS ; i++)
+		irq_desc[i].handler = &ppc8xx_pic;
+
+	cpm_interrupt_init();
+
+#if defined(CONFIG_PCI)
+	for (i = I8259_IRQ_OFFSET ; i < I8259_IRQ_OFFSET + NR_8259_INTS ; i++)
+		irq_desc[i].handler = &i8259_pic;
+
+	i8259_pic_irq_offset = I8259_IRQ_OFFSET;
+	i8259_init(0);
+
+	/* The i8259 cascade interrupt must be level sensitive. */
+	((immap_t *)IMAP_ADDR)->im_siu_conf.sc_siel &=
+		~(0x80000000 >> ISA_BRIDGE_INT);
+
+	if (setup_irq(ISA_BRIDGE_INT, &mbx_i8259_irqaction))
+		enable_irq(ISA_BRIDGE_INT);
+#endif	/* CONFIG_PCI */
+}
+
+/* -------------------------------------------------------------------- */
+
+/*
+ * This is a big hack right now, but it may turn into something real
+ * someday.
+ *
+ * For the 8xx boards (at this time anyway), there is nothing to initialize
+ * associated the PROM.  Rather than include all of the prom.c
+ * functions in the image just to get prom_init, all we really need right
+ * now is the initialization of the physical memory region.
+ */
+static unsigned long __init
+m8xx_find_end_of_memory(void)
+{
+	bd_t	*binfo;
+	extern unsigned char __res[];
+
+	binfo = (bd_t *)__res;
+
+	return binfo->bi_memsize;
+}
+
+/*
+ * Now map in some of the I/O space that is generically needed
+ * or shared with multiple devices.
+ * All of this fits into the same 4Mbyte region, so it only
+ * requires one page table page.  (or at least it used to  -- paulus)
+ */
+static void __init
+m8xx_map_io(void)
+{
+        io_block_mapping(IMAP_ADDR, IMAP_ADDR, IMAP_SIZE, _PAGE_IO);
+#ifdef CONFIG_MBX
+        io_block_mapping(NVRAM_ADDR, NVRAM_ADDR, NVRAM_SIZE, _PAGE_IO);
+        io_block_mapping(MBX_CSR_ADDR, MBX_CSR_ADDR, MBX_CSR_SIZE, _PAGE_IO);
+        io_block_mapping(PCI_CSR_ADDR, PCI_CSR_ADDR, PCI_CSR_SIZE, _PAGE_IO);
+
+	/* Map some of the PCI/ISA I/O space to get the IDE interface.
+	*/
+        io_block_mapping(PCI_ISA_IO_ADDR, PCI_ISA_IO_ADDR, 0x4000, _PAGE_IO);
+        io_block_mapping(PCI_IDE_ADDR, PCI_IDE_ADDR, 0x4000, _PAGE_IO);
+#endif
+#if defined(CONFIG_RPXLITE) || defined(CONFIG_RPXCLASSIC)
+	io_block_mapping(RPX_CSR_ADDR, RPX_CSR_ADDR, RPX_CSR_SIZE, _PAGE_IO);
+#if !defined(CONFIG_PCI)
+	io_block_mapping(_IO_BASE,_IO_BASE,_IO_BASE_SIZE, _PAGE_IO);
+#endif
+#endif
+#if defined(CONFIG_HTDMSOUND) || defined(CONFIG_RPXTOUCH) || defined(CONFIG_FB_RPX)
+	io_block_mapping(HIOX_CSR_ADDR, HIOX_CSR_ADDR, HIOX_CSR_SIZE, _PAGE_IO);
+#endif
+#ifdef CONFIG_FADS
+	io_block_mapping(BCSR_ADDR, BCSR_ADDR, BCSR_SIZE, _PAGE_IO);
+#endif
+#ifdef CONFIG_PCI
+        io_block_mapping(PCI_CSR_ADDR, PCI_CSR_ADDR, PCI_CSR_SIZE, _PAGE_IO);
+#endif
+#if defined(CONFIG_NETTA)
+	io_block_mapping(_IO_BASE,_IO_BASE,_IO_BASE_SIZE, _PAGE_IO);
+#endif
+}
+
+void __init
+platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
+		unsigned long r6, unsigned long r7)
+{
+	parse_bootinfo(find_bootinfo());
+
+	if ( r3 )
+		memcpy( (void *)__res,(void *)(r3+KERNELBASE), sizeof(bd_t) );
+
+#ifdef CONFIG_PCI
+	m8xx_setup_pci_ptrs();
+#endif
+
+#ifdef CONFIG_BLK_DEV_INITRD
+	/* take care of initrd if we have one */
+	if ( r4 )
+	{
+		initrd_start = r4 + KERNELBASE;
+		initrd_end = r5 + KERNELBASE;
+	}
+#endif /* CONFIG_BLK_DEV_INITRD */
+	/* take care of cmd line */
+	if ( r6 )
+	{
+		*(char *)(r7+KERNELBASE) = 0;
+		strcpy(cmd_line, (char *)(r6+KERNELBASE));
+	}
+
+	ppc_md.setup_arch		= m8xx_setup_arch;
+	ppc_md.show_percpuinfo		= m8xx_show_percpuinfo;
+	ppc_md.irq_canonicalize	= NULL;
+	ppc_md.init_IRQ			= m8xx_init_IRQ;
+	ppc_md.get_irq			= m8xx_get_irq;
+	ppc_md.init			= NULL;
+
+	ppc_md.restart			= m8xx_restart;
+	ppc_md.power_off		= m8xx_power_off;
+	ppc_md.halt			= m8xx_halt;
+
+	ppc_md.time_init		= NULL;
+	ppc_md.set_rtc_time		= m8xx_set_rtc_time;
+	ppc_md.get_rtc_time		= m8xx_get_rtc_time;
+	ppc_md.calibrate_decr		= m8xx_calibrate_decr;
+
+	ppc_md.find_end_of_memory	= m8xx_find_end_of_memory;
+	ppc_md.setup_io_mappings	= m8xx_map_io;
+
+#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE)
+	m8xx_ide_init();
+#endif
+}
diff --git a/arch/ppc/syslib/m8xx_wdt.c b/arch/ppc/syslib/m8xx_wdt.c
new file mode 100644
index 000000000000..7838a44bfd1d
--- /dev/null
+++ b/arch/ppc/syslib/m8xx_wdt.c
@@ -0,0 +1,99 @@
+/*
+ * m8xx_wdt.c - MPC8xx watchdog driver
+ *
+ * Author: Florian Schirmer <jolt@tuxbox.org>
+ *
+ * 2002 (c) Florian Schirmer <jolt@tuxbox.org> This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <asm/8xx_immap.h>
+#include <syslib/m8xx_wdt.h>
+
+static int wdt_timeout;
+
+void m8xx_wdt_reset(void)
+{
+	volatile immap_t *imap = (volatile immap_t *)IMAP_ADDR;
+
+	imap->im_siu_conf.sc_swsr = 0x556c;	/* write magic1 */
+	imap->im_siu_conf.sc_swsr = 0xaa39;	/* write magic2 */
+}
+
+static irqreturn_t m8xx_wdt_interrupt(int irq, void *dev, struct pt_regs *regs)
+{
+	volatile immap_t *imap = (volatile immap_t *)IMAP_ADDR;
+
+	m8xx_wdt_reset();
+
+	imap->im_sit.sit_piscr |= PISCR_PS;	/* clear irq */
+
+	return IRQ_HANDLED;
+}
+
+void __init m8xx_wdt_handler_install(bd_t * binfo)
+{
+	volatile immap_t *imap = (volatile immap_t *)IMAP_ADDR;
+	u32 pitc;
+	u32 sypcr;
+	u32 pitrtclk;
+
+	sypcr = imap->im_siu_conf.sc_sypcr;
+
+	if (!(sypcr & 0x04)) {
+		printk(KERN_NOTICE "m8xx_wdt: wdt disabled (SYPCR: 0x%08X)\n",
+		       sypcr);
+		return;
+	}
+
+	m8xx_wdt_reset();
+
+	printk(KERN_NOTICE
+	       "m8xx_wdt: active wdt found (SWTC: 0x%04X, SWP: 0x%01X)\n",
+	       (sypcr >> 16), sypcr & 0x01);
+
+	wdt_timeout = (sypcr >> 16) & 0xFFFF;
+
+	if (!wdt_timeout)
+		wdt_timeout = 0xFFFF;
+
+	if (sypcr & 0x01)
+		wdt_timeout *= 2048;
+
+	/*
+	 * Fire trigger if half of the wdt ticked down 
+	 */
+
+	if (imap->im_sit.sit_rtcsc & RTCSC_38K)
+		pitrtclk = 9600;
+	else
+		pitrtclk = 8192;
+
+	if ((wdt_timeout) > (UINT_MAX / pitrtclk))
+		pitc = wdt_timeout / binfo->bi_intfreq * pitrtclk / 2;
+	else
+		pitc = pitrtclk * wdt_timeout / binfo->bi_intfreq / 2;
+
+	imap->im_sit.sit_pitc = pitc << 16;
+	imap->im_sit.sit_piscr =
+	    (mk_int_int_mask(PIT_INTERRUPT) << 8) | PISCR_PIE | PISCR_PTE;
+
+	if (request_irq(PIT_INTERRUPT, m8xx_wdt_interrupt, 0, "watchdog", NULL))
+		panic("m8xx_wdt: could not allocate watchdog irq!");
+
+	printk(KERN_NOTICE
+	       "m8xx_wdt: keep-alive trigger installed (PITC: 0x%04X)\n", pitc);
+
+	wdt_timeout /= binfo->bi_intfreq;
+}
+
+int m8xx_wdt_get_timeout(void)
+{
+	return wdt_timeout;
+}
diff --git a/arch/ppc/syslib/m8xx_wdt.h b/arch/ppc/syslib/m8xx_wdt.h
new file mode 100644
index 000000000000..0d81a9f8155f
--- /dev/null
+++ b/arch/ppc/syslib/m8xx_wdt.h
@@ -0,0 +1,16 @@
+/*
+ * Author: Florian Schirmer <jolt@tuxbox.org>
+ *
+ * 2002 (c) Florian Schirmer <jolt@tuxbox.org> This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef _PPC_SYSLIB_M8XX_WDT_H
+#define _PPC_SYSLIB_M8XX_WDT_H
+
+extern void m8xx_wdt_handler_install(bd_t * binfo);
+extern int m8xx_wdt_get_timeout(void);
+extern void m8xx_wdt_reset(void);
+
+#endif				/* _PPC_SYSLIB_M8XX_WDT_H */
diff --git a/arch/ppc/syslib/mpc10x_common.c b/arch/ppc/syslib/mpc10x_common.c
new file mode 100644
index 000000000000..fd93adfd464c
--- /dev/null
+++ b/arch/ppc/syslib/mpc10x_common.c
@@ -0,0 +1,510 @@
+/*
+ * arch/ppc/syslib/mpc10x_common.c
+ *
+ * Common routines for the Motorola SPS MPC106, MPC107 and MPC8240 Host bridge,
+ * Mem ctlr, EPIC, etc.
+ *
+ * Author: Mark A. Greer
+ *         mgreer@mvista.com
+ *
+ * 2001 (c) MontaVista, Software, Inc.  This file is licensed under
+ * the terms of the GNU General Public License version 2.  This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+/*
+ * *** WARNING - A BAT MUST be set to access the PCI config addr/data regs ***
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/slab.h>
+
+#include <asm/byteorder.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+#include <asm/machdep.h>
+#include <asm/pci-bridge.h>
+#include <asm/open_pic.h>
+#include <asm/mpc10x.h>
+#include <asm/ocp.h>
+
+/* The OCP structure is fixed by code below, before OCP initialises.
+   paddr depends on where the board places the EUMB.
+    - fixed in mpc10x_bridge_init().
+   irq depends on two things:
+    > does the board use the EPIC at all? (PCORE does not).
+    > is the EPIC in serial or parallel mode?
+    - fixed in mpc10x_set_openpic().
+*/
+
+#ifdef CONFIG_MPC10X_OPENPIC
+#ifdef CONFIG_EPIC_SERIAL_MODE
+#define EPIC_IRQ_BASE (epic_serial_mode ? 16 : 5)
+#else
+#define EPIC_IRQ_BASE 5
+#endif
+#define MPC10X_I2C_IRQ (EPIC_IRQ_BASE + NUM_8259_INTERRUPTS)
+#define MPC10X_DMA0_IRQ (EPIC_IRQ_BASE + 1 + NUM_8259_INTERRUPTS)
+#define MPC10X_DMA1_IRQ (EPIC_IRQ_BASE + 2 + NUM_8259_INTERRUPTS)
+#else
+#define MPC10X_I2C_IRQ OCP_IRQ_NA
+#define MPC10X_DMA0_IRQ OCP_IRQ_NA
+#define MPC10X_DMA1_IRQ OCP_IRQ_NA
+#endif
+
+
+struct ocp_def core_ocp[] = {
+	{ .vendor	= OCP_VENDOR_INVALID
+	}
+};
+
+static struct ocp_fs_i2c_data mpc10x_i2c_data = {
+	.flags		= 0
+};
+static struct ocp_def mpc10x_i2c_ocp = {
+	.vendor		= OCP_VENDOR_MOTOROLA,
+	.function	= OCP_FUNC_IIC,
+	.index		= 0,
+	.additions	= &mpc10x_i2c_data
+};
+
+static struct ocp_def mpc10x_dma_ocp[2] = {
+{	.vendor		= OCP_VENDOR_MOTOROLA,
+	.function	= OCP_FUNC_DMA,
+	.index		= 0 },
+{	.vendor		= OCP_VENDOR_MOTOROLA,
+	.function	= OCP_FUNC_DMA,
+	.index		= 1 }
+};
+
+/* Set resources to match bridge memory map */
+void __init
+mpc10x_bridge_set_resources(int map, struct pci_controller *hose)
+{
+
+	switch (map) {
+		case MPC10X_MEM_MAP_A:
+			pci_init_resource(&hose->io_resource,
+					0x00000000,
+					0x3f7fffff,
+					IORESOURCE_IO,
+					"PCI host bridge");
+
+			pci_init_resource (&hose->mem_resources[0],
+					0xc0000000,
+					0xfeffffff,
+					IORESOURCE_MEM,
+					"PCI host bridge");
+			break;
+		case MPC10X_MEM_MAP_B:
+			pci_init_resource(&hose->io_resource,
+					0x00000000,
+					0x00bfffff,
+					IORESOURCE_IO,
+					"PCI host bridge");
+
+			pci_init_resource (&hose->mem_resources[0],
+					0x80000000,
+					0xfcffffff,
+					IORESOURCE_MEM,
+					"PCI host bridge");
+			break;
+		default:
+			printk("mpc10x_bridge_set_resources: "
+					"Invalid map specified\n");
+			if (ppc_md.progress)
+				ppc_md.progress("mpc10x:exit1", 0x100);
+	}
+}
+/*
+ * Do some initialization and put the EUMB registers at the specified address
+ * (also map the EPIC registers into virtual space--OpenPIC_Addr will be set).
+ *
+ * The EPIC is not on the 106, only the 8240 and 107.
+ */
+int __init
+mpc10x_bridge_init(struct pci_controller *hose,
+		   uint current_map,
+		   uint new_map,
+		   uint phys_eumb_base)
+{
+	int	host_bridge, picr1, picr1_bit;
+	ulong	pci_config_addr, pci_config_data;
+	u_char	pir, byte;
+
+	if (ppc_md.progress) ppc_md.progress("mpc10x:enter", 0x100);
+
+	/* Set up for current map so we can get at config regs */
+	switch (current_map) {
+		case MPC10X_MEM_MAP_A:
+			setup_indirect_pci(hose,
+					   MPC10X_MAPA_CNFG_ADDR,
+					   MPC10X_MAPA_CNFG_DATA);
+			break;
+		case MPC10X_MEM_MAP_B:
+			setup_indirect_pci(hose,
+					   MPC10X_MAPB_CNFG_ADDR,
+					   MPC10X_MAPB_CNFG_DATA);
+			break;
+		default:
+			printk("mpc10x_bridge_init: %s\n",
+				"Invalid current map specified");
+			if (ppc_md.progress)
+				ppc_md.progress("mpc10x:exit1", 0x100);
+			return -1;
+	}
+
+	/* Make sure it's a supported bridge */
+	early_read_config_dword(hose,
+			        0,
+			        PCI_DEVFN(0,0),
+			        PCI_VENDOR_ID,
+			        &host_bridge);
+
+	switch (host_bridge) {
+		case MPC10X_BRIDGE_106:
+		case MPC10X_BRIDGE_8240:
+		case MPC10X_BRIDGE_107:
+		case MPC10X_BRIDGE_8245:
+			break;
+		default:
+			if (ppc_md.progress)
+				ppc_md.progress("mpc10x:exit2", 0x100);
+			return -1;
+	}
+
+	switch (new_map) {
+		case MPC10X_MEM_MAP_A:
+			MPC10X_SETUP_HOSE(hose, A);
+			pci_config_addr = MPC10X_MAPA_CNFG_ADDR;
+			pci_config_data = MPC10X_MAPA_CNFG_DATA;
+			picr1_bit = MPC10X_CFG_PICR1_ADDR_MAP_A;
+			break;
+		case MPC10X_MEM_MAP_B:
+			MPC10X_SETUP_HOSE(hose, B);
+			pci_config_addr = MPC10X_MAPB_CNFG_ADDR;
+			pci_config_data = MPC10X_MAPB_CNFG_DATA;
+			picr1_bit = MPC10X_CFG_PICR1_ADDR_MAP_B;
+			break;
+		default:
+			printk("mpc10x_bridge_init: %s\n",
+				"Invalid new map specified");
+			if (ppc_md.progress)
+				ppc_md.progress("mpc10x:exit3", 0x100);
+			return -1;
+	}
+
+	/* Make bridge use the 'new_map', if not already usng it */
+	if (current_map != new_map) {
+		early_read_config_dword(hose,
+					0,
+					PCI_DEVFN(0,0),
+					MPC10X_CFG_PICR1_REG,
+					&picr1);
+
+		picr1 = (picr1 & ~MPC10X_CFG_PICR1_ADDR_MAP_MASK) |
+			 picr1_bit;
+
+		early_write_config_dword(hose,
+					 0,
+					 PCI_DEVFN(0,0),
+					 MPC10X_CFG_PICR1_REG,
+					 picr1);
+
+		asm volatile("sync");
+
+		/* Undo old mappings & map in new cfg data/addr regs */
+		iounmap((void *)hose->cfg_addr);
+		iounmap((void *)hose->cfg_data);
+
+		setup_indirect_pci(hose,
+				   pci_config_addr,
+				   pci_config_data);
+	}
+
+	/* Setup resources to match map */
+	mpc10x_bridge_set_resources(new_map, hose);
+
+	/*
+	 * Want processor accesses of 0xFDxxxxxx to be mapped
+	 * to PCI memory space at 0x00000000.  Do not want
+	 * host bridge to respond to PCI memory accesses of
+	 * 0xFDxxxxxx.  Do not want host bridge to respond
+	 * to PCI memory addresses 0xFD000000-0xFDFFFFFF;
+	 * want processor accesses from 0x000A0000-0x000BFFFF
+	 * to be forwarded to system memory.
+	 *
+	 * Only valid if not in agent mode and using MAP B.
+	 */
+	if (new_map == MPC10X_MEM_MAP_B) {
+		early_read_config_byte(hose,
+				       0,
+				       PCI_DEVFN(0,0),
+				       MPC10X_CFG_MAPB_OPTIONS_REG,
+				       &byte);
+
+		byte &= ~(MPC10X_CFG_MAPB_OPTIONS_PFAE  |
+			  MPC10X_CFG_MAPB_OPTIONS_PCICH |
+			  MPC10X_CFG_MAPB_OPTIONS_PROCCH);
+
+		if (host_bridge != MPC10X_BRIDGE_106) {
+			byte |= MPC10X_CFG_MAPB_OPTIONS_CFAE;
+		}
+
+		early_write_config_byte(hose,
+					0,
+					PCI_DEVFN(0,0),
+					MPC10X_CFG_MAPB_OPTIONS_REG,
+					byte);
+	}
+
+	if (host_bridge != MPC10X_BRIDGE_106) {
+		early_read_config_byte(hose,
+				       0,
+				       PCI_DEVFN(0,0),
+				       MPC10X_CFG_PIR_REG,
+				       &pir);
+
+		if (pir != MPC10X_CFG_PIR_HOST_BRIDGE) {
+			printk("Host bridge in Agent mode\n");
+			/* Read or Set LMBAR & PCSRBAR? */
+		}
+		
+		/* Set base addr of the 8240/107 EUMB.  */
+		early_write_config_dword(hose,
+					 0,
+					 PCI_DEVFN(0,0),
+					 MPC10X_CFG_EUMBBAR,
+					 phys_eumb_base);
+#ifdef CONFIG_MPC10X_OPENPIC
+		/* Map EPIC register part of EUMB into vitual memory  - PCORE
+		   uses an i8259 instead of EPIC. */
+		OpenPIC_Addr =
+			ioremap(phys_eumb_base + MPC10X_EUMB_EPIC_OFFSET,
+				MPC10X_EUMB_EPIC_SIZE);
+#endif
+		mpc10x_i2c_ocp.paddr = phys_eumb_base + MPC10X_EUMB_I2C_OFFSET;
+		mpc10x_i2c_ocp.irq = MPC10X_I2C_IRQ;
+		ocp_add_one_device(&mpc10x_i2c_ocp);
+		mpc10x_dma_ocp[0].paddr = phys_eumb_base +
+					MPC10X_EUMB_DMA_OFFSET + 0x100;
+		mpc10x_dma_ocp[0].irq = MPC10X_DMA0_IRQ;
+		ocp_add_one_device(&mpc10x_dma_ocp[0]);
+		mpc10x_dma_ocp[1].paddr = phys_eumb_base +
+					MPC10X_EUMB_DMA_OFFSET + 0x200;
+		mpc10x_dma_ocp[1].irq = MPC10X_DMA1_IRQ;
+		ocp_add_one_device(&mpc10x_dma_ocp[1]);
+	}
+
+#ifdef CONFIG_MPC10X_STORE_GATHERING
+	mpc10x_enable_store_gathering(hose);
+#else
+	mpc10x_disable_store_gathering(hose);
+#endif
+
+	/*
+	 * 8240 erratum 26, 8241/8245 erratum 29, 107 erratum 23: speculative
+	 * PCI reads may return stale data so turn off.
+	 */
+	if ((host_bridge == MPC10X_BRIDGE_8240)
+		|| (host_bridge == MPC10X_BRIDGE_8245)
+		|| (host_bridge == MPC10X_BRIDGE_107)) {
+
+		early_read_config_dword(hose, 0, PCI_DEVFN(0,0),
+			MPC10X_CFG_PICR1_REG, &picr1);
+
+		picr1 &= ~MPC10X_CFG_PICR1_SPEC_PCI_RD;
+
+		early_write_config_dword(hose, 0, PCI_DEVFN(0,0),
+			MPC10X_CFG_PICR1_REG, picr1);
+	}
+
+	/*
+	 * 8241/8245 erratum 28: PCI reads from local memory may return
+	 * stale data.  Workaround by setting PICR2[0] to disable copyback
+	 * optimization.  Oddly, the latest available user manual for the
+	 * 8245 (Rev 2., dated 10/2003) says PICR2[0] is reserverd.
+	 */
+	if (host_bridge == MPC10X_BRIDGE_8245) {
+		ulong	picr2;
+
+		early_read_config_dword(hose, 0, PCI_DEVFN(0,0),
+			MPC10X_CFG_PICR2_REG, &picr2);
+
+		picr2 |= MPC10X_CFG_PICR2_COPYBACK_OPT;
+
+		early_write_config_dword(hose, 0, PCI_DEVFN(0,0),
+			 MPC10X_CFG_PICR2_REG, picr2);
+	}
+
+	if (ppc_md.progress) ppc_md.progress("mpc10x:exit", 0x100);
+	return 0;
+}
+
+/*
+ * Need to make our own PCI config space access macros because
+ * mpc10x_get_mem_size() is called before the data structures are set up for
+ * the 'early_xxx' and 'indirect_xxx' routines to work.
+ * Assumes bus 0.
+ */
+#define MPC10X_CFG_read(val, addr, type, op)	*val = op((type)(addr))
+#define MPC10X_CFG_write(val, addr, type, op)	op((type *)(addr), (val))
+
+#define MPC10X_PCI_OP(rw, size, type, op, mask)			 	\
+static void								\
+mpc10x_##rw##_config_##size(uint *cfg_addr, uint *cfg_data, int devfn, int offset, type val) \
+{									\
+	out_be32(cfg_addr, 						\
+		 ((offset & 0xfc) << 24) | (devfn << 16)		\
+		 | (0 << 8) | 0x80);					\
+	MPC10X_CFG_##rw(val, cfg_data + (offset & mask), type, op);	\
+	return;    					 		\
+}
+
+MPC10X_PCI_OP(read,  byte,  u8 *, in_8, 3)
+MPC10X_PCI_OP(read,  dword, u32 *, in_le32, 0)
+#if 0	/* Not used */
+MPC10X_PCI_OP(write, byte,  u8, out_8, 3)
+MPC10X_PCI_OP(read,  word,  u16 *, in_le16, 2)
+MPC10X_PCI_OP(write, word,  u16, out_le16, 2)
+MPC10X_PCI_OP(write, dword, u32, out_le32, 0)
+#endif
+
+/*
+ * Read the memory controller registers to determine the amount of memory in
+ * the system.  This assumes that the firmware has correctly set up the memory
+ * controller registers.
+ */
+unsigned long __init
+mpc10x_get_mem_size(uint mem_map)
+{
+	uint			*config_addr, *config_data, val;
+	ulong			start, end, total, offset;
+	int			i;
+	u_char			bank_enables;
+
+	switch (mem_map) {
+		case MPC10X_MEM_MAP_A:
+			config_addr = (uint *)MPC10X_MAPA_CNFG_ADDR;
+			config_data = (uint *)MPC10X_MAPA_CNFG_DATA;
+			break;
+		case MPC10X_MEM_MAP_B:
+			config_addr = (uint *)MPC10X_MAPB_CNFG_ADDR;
+			config_data = (uint *)MPC10X_MAPB_CNFG_DATA;
+			break;
+		default:
+			return 0;
+	}
+
+	mpc10x_read_config_byte(config_addr,
+				config_data,
+				PCI_DEVFN(0,0),
+			        MPC10X_MCTLR_MEM_BANK_ENABLES,
+			        &bank_enables);
+
+	total = 0;
+
+	for (i=0; i<8; i++) {
+		if (bank_enables & (1 << i)) {
+			offset = MPC10X_MCTLR_MEM_START_1 + ((i > 3) ? 4 : 0);
+			mpc10x_read_config_dword(config_addr,
+						 config_data,
+						 PCI_DEVFN(0,0),
+						 offset,
+						 &val);
+			start = (val >> ((i & 3) << 3)) & 0xff;
+
+			offset = MPC10X_MCTLR_EXT_MEM_START_1 + ((i>3) ? 4 : 0);
+			mpc10x_read_config_dword(config_addr,
+						 config_data,
+						 PCI_DEVFN(0,0),
+						 offset,
+						 &val);
+			val = (val >> ((i & 3) << 3)) & 0x03;
+			start = (val << 28) | (start << 20);
+
+			offset = MPC10X_MCTLR_MEM_END_1 + ((i > 3) ? 4 : 0);
+			mpc10x_read_config_dword(config_addr,
+						 config_data,
+						 PCI_DEVFN(0,0),
+						 offset,
+						 &val);
+			end = (val >> ((i & 3) << 3)) & 0xff;
+
+			offset = MPC10X_MCTLR_EXT_MEM_END_1 + ((i > 3) ? 4 : 0);
+			mpc10x_read_config_dword(config_addr,
+						 config_data,
+						 PCI_DEVFN(0,0),
+						 offset,
+						 &val);
+			val = (val >> ((i & 3) << 3)) & 0x03;
+			end = (val << 28) | (end << 20) | 0xfffff;
+
+			total += (end - start + 1);
+		}
+	}
+
+	return total;
+}
+
+int __init
+mpc10x_enable_store_gathering(struct pci_controller *hose)
+{
+	uint picr1;
+
+	early_read_config_dword(hose,
+				0,
+				PCI_DEVFN(0,0),
+			        MPC10X_CFG_PICR1_REG,
+			        &picr1);
+
+	picr1 |= MPC10X_CFG_PICR1_ST_GATH_EN;
+
+	early_write_config_dword(hose,
+				0,
+				PCI_DEVFN(0,0),
+				MPC10X_CFG_PICR1_REG,
+				picr1);
+
+	return 0;
+}
+
+int __init
+mpc10x_disable_store_gathering(struct pci_controller *hose)
+{
+	uint picr1;
+
+	early_read_config_dword(hose,
+				0,
+				PCI_DEVFN(0,0),
+			        MPC10X_CFG_PICR1_REG,
+			        &picr1);
+
+	picr1 &= ~MPC10X_CFG_PICR1_ST_GATH_EN;
+
+	early_write_config_dword(hose,
+				0,
+				PCI_DEVFN(0,0),
+				MPC10X_CFG_PICR1_REG,
+				picr1);
+
+	return 0;
+}
+
+#ifdef CONFIG_MPC10X_OPENPIC
+void __init mpc10x_set_openpic(void)
+{
+	/* Map external IRQs */
+	openpic_set_sources(0, EPIC_IRQ_BASE, OpenPIC_Addr + 0x10200);
+	/* Skip reserved space and map i2c and DMA Ch[01] */
+	openpic_set_sources(EPIC_IRQ_BASE, 3, OpenPIC_Addr + 0x11020);
+	/* Skip reserved space and map Message Unit Interrupt (I2O) */
+	openpic_set_sources(EPIC_IRQ_BASE + 3, 1, OpenPIC_Addr + 0x110C0);
+
+	openpic_init(NUM_8259_INTERRUPTS);
+}
+#endif
diff --git a/arch/ppc/syslib/mpc52xx_devices.c b/arch/ppc/syslib/mpc52xx_devices.c
new file mode 100644
index 000000000000..ad5182efca1d
--- /dev/null
+++ b/arch/ppc/syslib/mpc52xx_devices.c
@@ -0,0 +1,318 @@
+/*
+ * arch/ppc/syslib/mpc52xx_devices.c
+ *
+ * Freescale MPC52xx device descriptions
+ *
+ *
+ * Maintainer : Sylvain Munaut <tnt@246tNt.com>
+ *
+ * Copyright (C) 2005 Sylvain Munaut <tnt@246tNt.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/fsl_devices.h>
+#include <linux/resource.h>
+#include <asm/mpc52xx.h>
+#include <asm/ppc_sys.h>
+
+
+static u64 mpc52xx_dma_mask = 0xffffffffULL;
+
+static struct fsl_i2c_platform_data mpc52xx_fsl_i2c_pdata = {
+	.device_flags = FSL_I2C_DEV_CLOCK_5200,
+};
+
+
+/* We use relative offsets for IORESOURCE_MEM to be independent from the
+ * MBAR location at compile time
+ */
+
+/* TODO Add the BestComm initiator channel to the device definitions,
+   possibly using IORESOURCE_DMA. But that's when BestComm is ready ... */
+
+struct platform_device ppc_sys_platform_devices[] = {
+	[MPC52xx_MSCAN1] = {
+		.name		= "mpc52xx-mscan",
+		.id		= 0,
+		.num_resources	= 2,
+		.resource = (struct resource[]) {
+			{
+				.start	= 0x0900,
+				.end	= 0x097f,
+				.flags	= IORESOURCE_MEM,
+			},
+			{
+				.start	= MPC52xx_MSCAN1_IRQ,
+				.end	= MPC52xx_MSCAN1_IRQ,
+				.flags	= IORESOURCE_IRQ,
+			},
+		},
+	},
+	[MPC52xx_MSCAN2] = {
+		.name		= "mpc52xx-mscan",
+		.id		= 1,
+		.num_resources	= 2,
+		.resource = (struct resource[]) {
+			{
+				.start	= 0x0980,
+				.end	= 0x09ff,
+				.flags	= IORESOURCE_MEM,
+			},
+			{
+				.start	= MPC52xx_MSCAN2_IRQ,
+				.end	= MPC52xx_MSCAN2_IRQ,
+				.flags	= IORESOURCE_IRQ,
+			},
+		},
+	},
+	[MPC52xx_SPI] = {
+		.name		= "mpc52xx-spi",
+		.id		= -1,
+		.num_resources	= 3,
+		.resource	= (struct resource[]) {
+			{
+				.start	= 0x0f00,
+				.end	= 0x0f1f,
+				.flags	= IORESOURCE_MEM,
+			},
+			{
+				.name	= "modf",
+				.start	= MPC52xx_SPI_MODF_IRQ,
+				.end	= MPC52xx_SPI_MODF_IRQ,
+				.flags	= IORESOURCE_IRQ,
+			},
+			{
+				.name	= "spif",
+				.start	= MPC52xx_SPI_SPIF_IRQ,
+				.end	= MPC52xx_SPI_SPIF_IRQ,
+				.flags	= IORESOURCE_IRQ,
+			},
+		},
+	},
+	[MPC52xx_USB] = {
+		.name		= "ppc-soc-ohci",
+		.id		= -1,
+		.num_resources	= 2,
+		.dev.dma_mask	= &mpc52xx_dma_mask,
+		.dev.coherent_dma_mask = 0xffffffffULL,
+		.resource	= (struct resource[]) {
+			{
+				.start	= 0x1000,
+				.end	= 0x10ff,
+				.flags	= IORESOURCE_MEM,
+			},
+			{
+				.start	= MPC52xx_USB_IRQ,
+				.end	= MPC52xx_USB_IRQ,
+				.flags	= IORESOURCE_IRQ,
+			},
+		},
+	},
+	[MPC52xx_BDLC] = {
+		.name		= "mpc52xx-bdlc",
+		.id		= -1,
+		.num_resources	= 2,
+		.resource	= (struct resource[]) {
+			{
+				.start	= 0x1300,
+				.end	= 0x130f,
+				.flags	= IORESOURCE_MEM,
+			},
+			{
+				.start	= MPC52xx_BDLC_IRQ,
+				.end	= MPC52xx_BDLC_IRQ,
+				.flags	= IORESOURCE_IRQ,
+			},
+		},
+	},
+	[MPC52xx_PSC1] = {
+		.name		= "mpc52xx-psc",
+		.id		= 0,
+		.num_resources	= 2,
+		.resource	= (struct resource[]) {
+			{
+				.start	= 0x2000,
+				.end	= 0x209f,
+				.flags	= IORESOURCE_MEM,
+			},
+			{
+				.start	= MPC52xx_PSC1_IRQ,
+				.end	= MPC52xx_PSC1_IRQ,
+				.flags	= IORESOURCE_IRQ,
+			},
+		},
+	},
+	[MPC52xx_PSC2] = {
+		.name		= "mpc52xx-psc",
+		.id		= 1,
+		.num_resources	= 2,
+		.resource	= (struct resource[]) {
+			{
+				.start	= 0x2200,
+				.end	= 0x229f,
+				.flags	= IORESOURCE_MEM,
+			},
+			{
+				.start	= MPC52xx_PSC2_IRQ,
+				.end	= MPC52xx_PSC2_IRQ,
+				.flags	= IORESOURCE_IRQ,
+			},
+		},
+	},
+	[MPC52xx_PSC3] = {
+		.name		= "mpc52xx-psc",
+		.id		= 2,
+		.num_resources	= 2,
+		.resource	= (struct resource[]) {
+			{
+				.start	= 0x2400,
+				.end	= 0x249f,
+				.flags	= IORESOURCE_MEM,
+			},
+			{
+				.start	= MPC52xx_PSC3_IRQ,
+				.end	= MPC52xx_PSC3_IRQ,
+				.flags	= IORESOURCE_IRQ,
+			},
+		},
+	},
+	[MPC52xx_PSC4] = {
+		.name		= "mpc52xx-psc",
+		.id		= 3,
+		.num_resources	= 2,
+		.resource	= (struct resource[]) {
+			{
+				.start	= 0x2600,
+				.end	= 0x269f,
+				.flags	= IORESOURCE_MEM,
+			},
+			{
+				.start	= MPC52xx_PSC4_IRQ,
+				.end	= MPC52xx_PSC4_IRQ,
+				.flags	= IORESOURCE_IRQ,
+			},
+		},
+	},
+	[MPC52xx_PSC5] = {
+		.name		= "mpc52xx-psc",
+		.id		= 4,
+		.num_resources	= 2,
+		.resource	= (struct resource[]) {
+			{
+				.start	= 0x2800,
+				.end	= 0x289f,
+				.flags	= IORESOURCE_MEM,
+			},
+			{
+				.start	= MPC52xx_PSC5_IRQ,
+				.end	= MPC52xx_PSC5_IRQ,
+				.flags	= IORESOURCE_IRQ,
+			},
+		},
+	},
+	[MPC52xx_PSC6] = {
+		.name		= "mpc52xx-psc",
+		.id		= 5,
+		.num_resources	= 2,
+		.resource	= (struct resource[]) {
+			{
+				.start	= 0x2c00,
+				.end	= 0x2c9f,
+				.flags	= IORESOURCE_MEM,
+			},
+			{
+				.start	= MPC52xx_PSC6_IRQ,
+				.end	= MPC52xx_PSC6_IRQ,
+				.flags	= IORESOURCE_IRQ,
+			},
+		},
+	},
+	[MPC52xx_FEC] = {
+		.name		= "mpc52xx-fec",
+		.id		= -1,
+		.num_resources	= 2,
+		.resource	= (struct resource[]) {
+			{
+				.start	= 0x3000,
+				.end	= 0x33ff,
+				.flags	= IORESOURCE_MEM,
+			},
+			{
+				.start	= MPC52xx_FEC_IRQ,
+				.end	= MPC52xx_FEC_IRQ,
+				.flags	= IORESOURCE_IRQ,
+			},
+		},
+	},
+	[MPC52xx_ATA] = {
+		.name		= "mpc52xx-ata",
+		.id		= -1,
+		.num_resources	= 2,
+		.resource	= (struct resource[]) {
+			{
+				.start	= 0x3a00,
+				.end	= 0x3aff,
+				.flags	= IORESOURCE_MEM,
+			},
+			{
+				.start	= MPC52xx_ATA_IRQ,
+				.end	= MPC52xx_ATA_IRQ,
+				.flags	= IORESOURCE_IRQ,
+			},
+		},
+	},
+	[MPC52xx_I2C1] = {
+		.name		= "fsl-i2c",
+		.id		= 0,
+		.dev.platform_data = &mpc52xx_fsl_i2c_pdata,
+		.num_resources	= 2,
+		.resource	= (struct resource[]) {
+			{
+				.start	= 0x3d00,
+				.end	= 0x3d1f,
+				.flags	= IORESOURCE_MEM,
+			},
+			{
+				.start	= MPC52xx_I2C1_IRQ,
+				.end	= MPC52xx_I2C1_IRQ,
+				.flags	= IORESOURCE_IRQ,
+			},
+		},
+	},
+	[MPC52xx_I2C2] = {
+		.name		= "fsl-i2c",
+		.id		= 1,
+		.dev.platform_data = &mpc52xx_fsl_i2c_pdata,
+		.num_resources	= 2,
+		.resource	= (struct resource[]) {
+			{
+				.start	= 0x3d40,
+				.end	= 0x3d5f,
+				.flags	= IORESOURCE_MEM,
+			},
+			{
+				.start	= MPC52xx_I2C2_IRQ,
+				.end	= MPC52xx_I2C2_IRQ,
+				.flags	= IORESOURCE_IRQ,
+			},
+		},
+	},
+};
+
+
+static int __init mach_mpc52xx_fixup(struct platform_device *pdev)
+{
+	ppc_sys_fixup_mem_resource(pdev, MPC52xx_MBAR);
+	return 0;
+}
+
+static int __init mach_mpc52xx_init(void)
+{
+	ppc_sys_device_fixup = mach_mpc52xx_fixup;
+	return 0;
+}
+
+postcore_initcall(mach_mpc52xx_init);
diff --git a/arch/ppc/syslib/mpc52xx_pci.c b/arch/ppc/syslib/mpc52xx_pci.c
new file mode 100644
index 000000000000..c723efd954a6
--- /dev/null
+++ b/arch/ppc/syslib/mpc52xx_pci.c
@@ -0,0 +1,235 @@
+/*
+ * arch/ppc/syslib/mpc52xx_pci.c
+ *
+ * PCI code for the Freescale MPC52xx embedded CPU.
+ *
+ *
+ * Maintainer : Sylvain Munaut <tnt@246tNt.com>
+ *
+ * Copyright (C) 2004 Sylvain Munaut <tnt@246tNt.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/config.h>
+
+#include <asm/pci.h>
+
+#include <asm/mpc52xx.h>
+#include "mpc52xx_pci.h"
+
+#include <asm/delay.h>
+
+
+static int
+mpc52xx_pci_read_config(struct pci_bus *bus, unsigned int devfn,
+				int offset, int len, u32 *val)
+{
+	struct pci_controller *hose = bus->sysdata;
+	u32 value;
+
+	if (ppc_md.pci_exclude_device)
+		if (ppc_md.pci_exclude_device(bus->number, devfn))
+			return PCIBIOS_DEVICE_NOT_FOUND;
+
+	out_be32(hose->cfg_addr,
+		(1 << 31) |
+		((bus->number - hose->bus_offset) << 16) |
+		(devfn << 8) |
+		(offset & 0xfc));
+
+	value = in_le32(hose->cfg_data);
+
+	if (len != 4) {
+		value >>= ((offset & 0x3) << 3);
+		value &= 0xffffffff >> (32 - (len << 3));
+	}
+
+	*val = value;
+
+	out_be32(hose->cfg_addr, 0);
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int
+mpc52xx_pci_write_config(struct pci_bus *bus, unsigned int devfn,
+				int offset, int len, u32 val)
+{
+	struct pci_controller *hose = bus->sysdata;
+	u32 value, mask;
+
+	if (ppc_md.pci_exclude_device)
+		if (ppc_md.pci_exclude_device(bus->number, devfn))
+			return PCIBIOS_DEVICE_NOT_FOUND;
+
+	out_be32(hose->cfg_addr,
+		(1 << 31) |
+		((bus->number - hose->bus_offset) << 16) |
+		(devfn << 8) |
+		(offset & 0xfc));
+
+	if (len != 4) {
+		value = in_le32(hose->cfg_data);
+
+		offset = (offset & 0x3) << 3;
+		mask = (0xffffffff >> (32 - (len << 3)));
+		mask <<= offset;
+
+		value &= ~mask;
+		val = value | ((val << offset) & mask);
+	}
+
+	out_le32(hose->cfg_data, val);
+
+	out_be32(hose->cfg_addr, 0);
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static struct pci_ops mpc52xx_pci_ops = {
+	.read  = mpc52xx_pci_read_config,
+	.write = mpc52xx_pci_write_config
+};
+
+
+static void __init
+mpc52xx_pci_setup(struct mpc52xx_pci __iomem *pci_regs)
+{
+
+	/* Setup control regs */
+		/* Nothing to do afaik */
+
+	/* Setup windows */
+	out_be32(&pci_regs->iw0btar, MPC52xx_PCI_IWBTAR_TRANSLATION(
+		MPC52xx_PCI_MEM_START + MPC52xx_PCI_MEM_OFFSET,
+		MPC52xx_PCI_MEM_START,
+		MPC52xx_PCI_MEM_SIZE ));
+
+	out_be32(&pci_regs->iw1btar, MPC52xx_PCI_IWBTAR_TRANSLATION(
+		MPC52xx_PCI_MMIO_START + MPC52xx_PCI_MEM_OFFSET,
+		MPC52xx_PCI_MMIO_START,
+		MPC52xx_PCI_MMIO_SIZE ));
+
+	out_be32(&pci_regs->iw2btar, MPC52xx_PCI_IWBTAR_TRANSLATION(
+		MPC52xx_PCI_IO_BASE,
+		MPC52xx_PCI_IO_START,
+		MPC52xx_PCI_IO_SIZE ));
+
+	out_be32(&pci_regs->iwcr, MPC52xx_PCI_IWCR_PACK(
+		( MPC52xx_PCI_IWCR_ENABLE |		/* iw0btar */
+		  MPC52xx_PCI_IWCR_READ_MULTI |
+		  MPC52xx_PCI_IWCR_MEM ),
+		( MPC52xx_PCI_IWCR_ENABLE |		/* iw1btar */
+		  MPC52xx_PCI_IWCR_READ |
+		  MPC52xx_PCI_IWCR_MEM ),
+		( MPC52xx_PCI_IWCR_ENABLE |		/* iw2btar */
+		  MPC52xx_PCI_IWCR_IO )
+	));
+
+
+	out_be32(&pci_regs->tbatr0,
+		MPC52xx_PCI_TBATR_ENABLE | MPC52xx_PCI_TARGET_IO );
+	out_be32(&pci_regs->tbatr1,
+		MPC52xx_PCI_TBATR_ENABLE | MPC52xx_PCI_TARGET_MEM );
+
+	out_be32(&pci_regs->tcr, MPC52xx_PCI_TCR_LD);
+
+	/* Reset the exteral bus ( internal PCI controller is NOT resetted ) */
+	/* Not necessary and can be a bad thing if for example the bootloader
+	   is displaying a splash screen or ... Just left here for
+	   documentation purpose if anyone need it */
+#if 0
+	u32 tmp;
+	tmp = in_be32(&pci_regs->gscr);
+	out_be32(&pci_regs->gscr, tmp | MPC52xx_PCI_GSCR_PR);
+	udelay(50);
+	out_be32(&pci_regs->gscr, tmp);
+#endif
+}
+
+static void __init
+mpc52xx_pci_fixup_resources(struct pci_dev *dev)
+{
+	int i;
+
+	/* We don't rely on boot loader for PCI and resets all
+	   devices */
+	for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
+		struct resource *res = &dev->resource[i];
+		if (res->end > res->start) {	/* Only valid resources */
+			res->end -= res->start;
+			res->start = 0;
+			res->flags |= IORESOURCE_UNSET;
+		}
+	}
+
+	/* The PCI Host bridge of MPC52xx has a prefetch memory resource
+	   fixed to 1Gb. Doesn't fit in the resource system so we remove it */
+	if ( (dev->vendor == PCI_VENDOR_ID_MOTOROLA) &&
+	     (dev->device == PCI_DEVICE_ID_MOTOROLA_MPC5200) ) {
+		struct resource *res = &dev->resource[1];
+		res->start = res->end = res->flags = 0;
+	}
+}
+
+void __init
+mpc52xx_find_bridges(void)
+{
+	struct mpc52xx_pci __iomem *pci_regs;
+	struct pci_controller *hose;
+
+	pci_assign_all_busses = 1;
+
+	pci_regs = ioremap(MPC52xx_PA(MPC52xx_PCI_OFFSET), MPC52xx_PCI_SIZE);
+	if (!pci_regs)
+		return;
+
+	hose = pcibios_alloc_controller();
+	if (!hose) {
+		iounmap(pci_regs);
+		return;
+	}
+
+	ppc_md.pci_swizzle = common_swizzle;
+	ppc_md.pcibios_fixup_resources = mpc52xx_pci_fixup_resources;
+
+	hose->first_busno = 0;
+	hose->last_busno = 0xff;
+	hose->bus_offset = 0;
+	hose->ops = &mpc52xx_pci_ops;
+
+	mpc52xx_pci_setup(pci_regs);
+
+	hose->pci_mem_offset = MPC52xx_PCI_MEM_OFFSET;
+
+	isa_io_base =
+		(unsigned long) ioremap(MPC52xx_PCI_IO_BASE,
+					MPC52xx_PCI_IO_SIZE);
+	hose->io_base_virt = (void *) isa_io_base;
+
+	hose->cfg_addr = &pci_regs->car;
+	hose->cfg_data = (void __iomem *) isa_io_base;
+
+	/* Setup resources */
+	pci_init_resource(&hose->mem_resources[0],
+			MPC52xx_PCI_MEM_START,
+			MPC52xx_PCI_MEM_STOP,
+			IORESOURCE_MEM|IORESOURCE_PREFETCH,
+			"PCI prefetchable memory");
+
+	pci_init_resource(&hose->mem_resources[1],
+			MPC52xx_PCI_MMIO_START,
+			MPC52xx_PCI_MMIO_STOP,
+			IORESOURCE_MEM,
+			"PCI memory");
+
+	pci_init_resource(&hose->io_resource,
+			MPC52xx_PCI_IO_START,
+			MPC52xx_PCI_IO_STOP,
+			IORESOURCE_IO,
+			"PCI I/O");
+
+}
diff --git a/arch/ppc/syslib/mpc52xx_pci.h b/arch/ppc/syslib/mpc52xx_pci.h
new file mode 100644
index 000000000000..04b509a02530
--- /dev/null
+++ b/arch/ppc/syslib/mpc52xx_pci.h
@@ -0,0 +1,139 @@
+/*
+ * arch/ppc/syslib/mpc52xx_pci.h
+ *
+ * PCI Include file the Freescale MPC52xx embedded cpu chips
+ *
+ *
+ * Maintainer : Sylvain Munaut <tnt@246tNt.com>
+ *
+ * Inspired from code written by Dale Farnsworth <dfarnsworth@mvista.com>
+ * for the 2.4 kernel.
+ *
+ * Copyright (C) 2004 Sylvain Munaut <tnt@246tNt.com>
+ * Copyright (C) 2003 MontaVista, Software, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#ifndef __SYSLIB_MPC52xx_PCI_H__
+#define __SYSLIB_MPC52xx_PCI_H__
+
+/* ======================================================================== */
+/* PCI windows config                                                       */
+/* ======================================================================== */
+
+/*
+ * Master windows : MPC52xx -> PCI
+ *
+ *  0x80000000 -> 0x9FFFFFFF       PCI Mem prefetchable          IW0BTAR
+ *  0xA0000000 -> 0xAFFFFFFF       PCI Mem                       IW1BTAR
+ *  0xB0000000 -> 0xB0FFFFFF       PCI IO                        IW2BTAR
+ *
+ * Slave windows  : PCI -> MPC52xx
+ *
+ *  0xF0000000 -> 0xF003FFFF       MPC52xx MBAR                  TBATR0
+ *  0x00000000 -> 0x3FFFFFFF       MPC52xx local memory          TBATR1
+ */
+
+#define MPC52xx_PCI_MEM_OFFSET 	0x00000000	/* Offset for MEM MMIO */
+
+#define MPC52xx_PCI_MEM_START	0x80000000
+#define MPC52xx_PCI_MEM_SIZE	0x20000000
+#define MPC52xx_PCI_MEM_STOP	(MPC52xx_PCI_MEM_START+MPC52xx_PCI_MEM_SIZE-1)
+
+#define MPC52xx_PCI_MMIO_START	0xa0000000
+#define MPC52xx_PCI_MMIO_SIZE	0x10000000
+#define MPC52xx_PCI_MMIO_STOP	(MPC52xx_PCI_MMIO_START+MPC52xx_PCI_MMIO_SIZE-1)
+
+#define MPC52xx_PCI_IO_BASE	0xb0000000
+
+#define MPC52xx_PCI_IO_START	0x00000000
+#define MPC52xx_PCI_IO_SIZE	0x01000000
+#define MPC52xx_PCI_IO_STOP	(MPC52xx_PCI_IO_START+MPC52xx_PCI_IO_SIZE-1)
+
+
+#define MPC52xx_PCI_TARGET_IO	MPC52xx_MBAR
+#define MPC52xx_PCI_TARGET_MEM	0x00000000
+
+
+/* ======================================================================== */
+/* Structures mapping & Defines for PCI Unit                                */
+/* ======================================================================== */
+
+#define MPC52xx_PCI_GSCR_BM		0x40000000
+#define MPC52xx_PCI_GSCR_PE		0x20000000
+#define MPC52xx_PCI_GSCR_SE		0x10000000
+#define MPC52xx_PCI_GSCR_XLB2PCI_MASK	0x07000000
+#define MPC52xx_PCI_GSCR_XLB2PCI_SHIFT	24
+#define MPC52xx_PCI_GSCR_IPG2PCI_MASK	0x00070000
+#define MPC52xx_PCI_GSCR_IPG2PCI_SHIFT	16
+#define MPC52xx_PCI_GSCR_BME		0x00004000
+#define MPC52xx_PCI_GSCR_PEE		0x00002000
+#define MPC52xx_PCI_GSCR_SEE		0x00001000
+#define MPC52xx_PCI_GSCR_PR		0x00000001
+
+
+#define MPC52xx_PCI_IWBTAR_TRANSLATION(proc_ad,pci_ad,size)	  \
+		( ( (proc_ad) & 0xff000000 )			| \
+		  ( (((size) - 1) >> 8) & 0x00ff0000 )		| \
+		  ( ((pci_ad) >> 16) & 0x0000ff00 ) )
+
+#define MPC52xx_PCI_IWCR_PACK(win0,win1,win2)	(((win0) << 24) | \
+						 ((win1) << 16) | \
+						 ((win2) <<  8))
+
+#define MPC52xx_PCI_IWCR_DISABLE	0x0
+#define MPC52xx_PCI_IWCR_ENABLE		0x1
+#define MPC52xx_PCI_IWCR_READ		0x0
+#define MPC52xx_PCI_IWCR_READ_LINE	0x2
+#define MPC52xx_PCI_IWCR_READ_MULTI	0x4
+#define MPC52xx_PCI_IWCR_MEM		0x0
+#define MPC52xx_PCI_IWCR_IO		0x8
+
+#define MPC52xx_PCI_TCR_P		0x01000000
+#define MPC52xx_PCI_TCR_LD		0x00010000
+
+#define MPC52xx_PCI_TBATR_DISABLE	0x0
+#define MPC52xx_PCI_TBATR_ENABLE	0x1
+
+
+#ifndef __ASSEMBLY__
+
+struct mpc52xx_pci {
+	u32	idr;		/* PCI + 0x00 */
+	u32	scr;		/* PCI + 0x04 */
+	u32	ccrir;		/* PCI + 0x08 */
+	u32	cr1;		/* PCI + 0x0C */
+	u32	bar0;		/* PCI + 0x10 */
+	u32	bar1;		/* PCI + 0x14 */
+	u8	reserved1[16];	/* PCI + 0x18 */
+	u32	ccpr;		/* PCI + 0x28 */
+	u32	sid;		/* PCI + 0x2C */
+	u32	erbar;		/* PCI + 0x30 */
+	u32	cpr;		/* PCI + 0x34 */
+	u8	reserved2[4];	/* PCI + 0x38 */
+	u32	cr2;		/* PCI + 0x3C */
+	u8	reserved3[32];	/* PCI + 0x40 */
+	u32	gscr;		/* PCI + 0x60 */
+	u32	tbatr0;		/* PCI + 0x64 */
+	u32	tbatr1;		/* PCI + 0x68 */
+	u32	tcr;		/* PCI + 0x6C */
+	u32	iw0btar;	/* PCI + 0x70 */
+	u32	iw1btar;	/* PCI + 0x74 */
+	u32	iw2btar;	/* PCI + 0x78 */
+	u8	reserved4[4];	/* PCI + 0x7C */
+	u32	iwcr;		/* PCI + 0x80 */
+	u32	icr;		/* PCI + 0x84 */
+	u32	isr;		/* PCI + 0x88 */
+	u32	arb;		/* PCI + 0x8C */
+	u8	reserved5[104];	/* PCI + 0x90 */
+	u32	car;		/* PCI + 0xF8 */
+	u8	reserved6[4];	/* PCI + 0xFC */
+};
+
+#endif  /* __ASSEMBLY__ */
+
+
+#endif  /* __SYSLIB_MPC52xx_PCI_H__ */
diff --git a/arch/ppc/syslib/mpc52xx_pic.c b/arch/ppc/syslib/mpc52xx_pic.c
new file mode 100644
index 000000000000..4c4497e62517
--- /dev/null
+++ b/arch/ppc/syslib/mpc52xx_pic.c
@@ -0,0 +1,257 @@
+/*
+ * arch/ppc/syslib/mpc52xx_pic.c
+ *
+ * Programmable Interrupt Controller functions for the Freescale MPC52xx 
+ * embedded CPU.
+ *
+ * 
+ * Maintainer : Sylvain Munaut <tnt@246tNt.com>
+ *
+ * Based on (well, mostly copied from) the code from the 2.4 kernel by
+ * Dale Farnsworth <dfarnsworth@mvista.com> and Kent Borg.
+ * 
+ * Copyright (C) 2004 Sylvain Munaut <tnt@246tNt.com>
+ * Copyright (C) 2003 Montavista Software, Inc
+ * 
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/stddef.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/signal.h>
+#include <linux/stddef.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+
+#include <asm/io.h>
+#include <asm/processor.h>
+#include <asm/system.h>
+#include <asm/irq.h>
+#include <asm/mpc52xx.h>
+
+
+static struct mpc52xx_intr __iomem *intr;
+static struct mpc52xx_sdma __iomem *sdma;
+
+static void
+mpc52xx_ic_disable(unsigned int irq)
+{
+	u32 val;
+
+	if (irq == MPC52xx_IRQ0) {
+		val = in_be32(&intr->ctrl);
+		val &= ~(1 << 11);
+		out_be32(&intr->ctrl, val);
+	}
+	else if (irq < MPC52xx_IRQ1) {
+		BUG();
+	}
+	else if (irq <= MPC52xx_IRQ3) {
+		val = in_be32(&intr->ctrl);
+		val &= ~(1 << (10 - (irq - MPC52xx_IRQ1)));
+		out_be32(&intr->ctrl, val);
+	}
+	else if (irq < MPC52xx_SDMA_IRQ_BASE) {
+		val = in_be32(&intr->main_mask);
+		val |= 1 << (16 - (irq - MPC52xx_MAIN_IRQ_BASE));
+		out_be32(&intr->main_mask, val);
+	}
+	else if (irq < MPC52xx_PERP_IRQ_BASE) {
+		val = in_be32(&sdma->IntMask);
+		val |= 1 << (irq - MPC52xx_SDMA_IRQ_BASE);
+		out_be32(&sdma->IntMask, val);
+	}
+	else {
+		val = in_be32(&intr->per_mask);
+		val |= 1 << (31 - (irq - MPC52xx_PERP_IRQ_BASE));
+		out_be32(&intr->per_mask, val);
+	}
+}
+
+static void
+mpc52xx_ic_enable(unsigned int irq)
+{
+	u32 val;
+
+	if (irq == MPC52xx_IRQ0) {
+		val = in_be32(&intr->ctrl);
+		val |= 1 << 11;
+		out_be32(&intr->ctrl, val);
+	}
+	else if (irq < MPC52xx_IRQ1) {
+		BUG();
+	}
+	else if (irq <= MPC52xx_IRQ3) {
+		val = in_be32(&intr->ctrl);
+		val |= 1 << (10 - (irq - MPC52xx_IRQ1));
+		out_be32(&intr->ctrl, val);
+	}
+	else if (irq < MPC52xx_SDMA_IRQ_BASE) {
+		val = in_be32(&intr->main_mask);
+		val &= ~(1 << (16 - (irq - MPC52xx_MAIN_IRQ_BASE)));
+		out_be32(&intr->main_mask, val);
+	}
+	else if (irq < MPC52xx_PERP_IRQ_BASE) {
+		val = in_be32(&sdma->IntMask);
+		val &= ~(1 << (irq - MPC52xx_SDMA_IRQ_BASE));
+		out_be32(&sdma->IntMask, val);
+	}
+	else {
+		val = in_be32(&intr->per_mask);
+		val &= ~(1 << (31 - (irq - MPC52xx_PERP_IRQ_BASE)));
+		out_be32(&intr->per_mask, val);
+	}
+}
+
+static void
+mpc52xx_ic_ack(unsigned int irq)
+{
+	u32 val;
+
+	/*
+	 * Only some irqs are reset here, others in interrupting hardware.
+	 */
+
+	switch (irq) {
+	case MPC52xx_IRQ0:
+		val = in_be32(&intr->ctrl);
+		val |= 0x08000000;
+		out_be32(&intr->ctrl, val);
+		break;
+	case MPC52xx_CCS_IRQ:
+		val = in_be32(&intr->enc_status);
+		val |= 0x00000400;
+		out_be32(&intr->enc_status, val);
+		break;
+	case MPC52xx_IRQ1:
+		val = in_be32(&intr->ctrl);
+		val |= 0x04000000;
+		out_be32(&intr->ctrl, val);
+		break;
+	case MPC52xx_IRQ2:
+		val = in_be32(&intr->ctrl);
+		val |= 0x02000000;
+		out_be32(&intr->ctrl, val);
+		break;
+	case MPC52xx_IRQ3:
+		val = in_be32(&intr->ctrl);
+		val |= 0x01000000;
+		out_be32(&intr->ctrl, val);
+		break;
+	default:
+		if (irq >= MPC52xx_SDMA_IRQ_BASE
+		    && irq < (MPC52xx_SDMA_IRQ_BASE + MPC52xx_SDMA_IRQ_NUM)) {
+			out_be32(&sdma->IntPend,
+				 1 << (irq - MPC52xx_SDMA_IRQ_BASE));
+		}
+		break;
+	}
+}
+
+static void
+mpc52xx_ic_disable_and_ack(unsigned int irq)
+{
+	mpc52xx_ic_disable(irq);
+	mpc52xx_ic_ack(irq);
+}
+
+static void
+mpc52xx_ic_end(unsigned int irq)
+{
+	if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
+		mpc52xx_ic_enable(irq);
+}
+
+static struct hw_interrupt_type mpc52xx_ic = {
+	.typename	= " MPC52xx  ",
+	.enable		= mpc52xx_ic_enable,
+	.disable	= mpc52xx_ic_disable,
+	.ack		= mpc52xx_ic_disable_and_ack,
+	.end		= mpc52xx_ic_end,
+};
+
+void __init
+mpc52xx_init_irq(void)
+{
+	int i;
+	u32 intr_ctrl;
+
+	/* Remap the necessary zones */
+	intr = ioremap(MPC52xx_PA(MPC52xx_INTR_OFFSET), MPC52xx_INTR_SIZE);
+	sdma = ioremap(MPC52xx_PA(MPC52xx_SDMA_OFFSET), MPC52xx_SDMA_SIZE);
+
+	if ((intr==NULL) || (sdma==NULL))
+		panic("Can't ioremap PIC/SDMA register for init_irq !");
+
+	/* Disable all interrupt sources. */
+	out_be32(&sdma->IntPend, 0xffffffff);	/* 1 means clear pending */
+	out_be32(&sdma->IntMask, 0xffffffff);	/* 1 means disabled */
+	out_be32(&intr->per_mask, 0x7ffffc00);	/* 1 means disabled */
+	out_be32(&intr->main_mask, 0x00010fff);	/* 1 means disabled */
+	intr_ctrl = in_be32(&intr->ctrl);
+	intr_ctrl &=    0x00ff0000;	/* Keeps IRQ[0-3] config */
+	intr_ctrl |=	0x0f000000 |	/* clear IRQ 0-3 */
+			0x00001000 |	/* MEE master external enable */
+			0x00000000 |	/* 0 means disable IRQ 0-3 */
+			0x00000001;	/* CEb route critical normally */
+	out_be32(&intr->ctrl, intr_ctrl);
+
+	/* Zero a bunch of the priority settings.  */
+	out_be32(&intr->per_pri1, 0);
+	out_be32(&intr->per_pri2, 0);
+	out_be32(&intr->per_pri3, 0);
+	out_be32(&intr->main_pri1, 0);
+	out_be32(&intr->main_pri2, 0);
+
+	/* Initialize irq_desc[i].handler's with mpc52xx_ic. */
+	for (i = 0; i < NR_IRQS; i++) {
+		irq_desc[i].handler = &mpc52xx_ic;
+		irq_desc[i].status = IRQ_LEVEL;
+	}
+
+	#define IRQn_MODE(intr_ctrl,irq) (((intr_ctrl) >> (22-(i<<1))) & 0x03)
+	for (i=0 ; i<4 ; i++) {
+		int mode;
+		mode = IRQn_MODE(intr_ctrl,i);
+		if ((mode == 0x1) || (mode == 0x2))
+			irq_desc[i?MPC52xx_IRQ1+i-1:MPC52xx_IRQ0].status = 0;
+	}
+}
+
+int
+mpc52xx_get_irq(struct pt_regs *regs)
+{
+	u32 status;
+	int irq = -1;
+
+	status = in_be32(&intr->enc_status);
+
+	if (status & 0x00000400) {		/* critical */
+		irq = (status >> 8) & 0x3;
+		if (irq == 2)			/* high priority peripheral */
+			goto peripheral;
+		irq += MPC52xx_CRIT_IRQ_BASE;
+	}
+	else if (status & 0x00200000) {		/* main */
+		irq = (status >> 16) & 0x1f;
+		if (irq == 4)			/* low priority peripheral */
+			goto peripheral;
+		irq += MPC52xx_MAIN_IRQ_BASE;
+	}
+	else if (status & 0x20000000) {		/* peripheral */
+peripheral:
+		irq = (status >> 24) & 0x1f;
+		if (irq == 0) {			/* bestcomm */
+			status = in_be32(&sdma->IntPend);
+			irq = ffs(status) + MPC52xx_SDMA_IRQ_BASE-1;
+		}
+		else
+			irq += MPC52xx_PERP_IRQ_BASE;
+	}
+
+	return irq;
+}
+
diff --git a/arch/ppc/syslib/mpc52xx_setup.c b/arch/ppc/syslib/mpc52xx_setup.c
new file mode 100644
index 000000000000..bb2374585a7b
--- /dev/null
+++ b/arch/ppc/syslib/mpc52xx_setup.c
@@ -0,0 +1,230 @@
+/*
+ * arch/ppc/syslib/mpc52xx_setup.c
+ *
+ * Common code for the boards based on Freescale MPC52xx embedded CPU.
+ *
+ * 
+ * Maintainer : Sylvain Munaut <tnt@246tNt.com>
+ *
+ * Support for other bootloaders than UBoot by Dale Farnsworth 
+ * <dfarnsworth@mvista.com>
+ * 
+ * Copyright (C) 2004 Sylvain Munaut <tnt@246tNt.com>
+ * Copyright (C) 2003 Montavista Software, Inc
+ * 
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/config.h>
+
+#include <asm/io.h>
+#include <asm/time.h>
+#include <asm/mpc52xx.h>
+#include <asm/mpc52xx_psc.h>
+#include <asm/pgtable.h>
+#include <asm/ppcboot.h>
+
+extern bd_t __res;
+
+static int core_mult[] = {		/* CPU Frequency multiplier, taken    */
+	0,  0,  0,  10, 20, 20, 25, 45,	/* from the datasheet used to compute */
+	30, 55, 40, 50, 0,  60, 35, 0,	/* CPU frequency from XLB freq and    */
+	30, 25, 65, 10, 70, 20, 75, 45,	/* external jumper config             */
+	0,  55, 40, 50, 80, 60, 35, 0
+};
+
+void
+mpc52xx_restart(char *cmd)
+{
+	struct mpc52xx_gpt __iomem *gpt0 = MPC52xx_VA(MPC52xx_GPTx_OFFSET(0));
+
+	local_irq_disable();
+
+	/* Turn on the watchdog and wait for it to expire. It effectively
+	  does a reset */
+	out_be32(&gpt0->count, 0x000000ff);
+	out_be32(&gpt0->mode, 0x00009004);
+
+	while (1);
+}
+
+void
+mpc52xx_halt(void)
+{
+	local_irq_disable();
+
+	while (1);
+}
+
+void
+mpc52xx_power_off(void)
+{
+	/* By default we don't have any way of shut down.
+	   If a specific board wants to, it can set the power down
+	   code to any hardware implementation dependent code */
+	mpc52xx_halt();
+}
+
+
+void __init
+mpc52xx_set_bat(void)
+{
+	/* Set BAT 2 to map the 0xf0000000 area */
+	/* This mapping is used during mpc52xx_progress,
+	 * mpc52xx_find_end_of_memory, and UARTs/GPIO access for debug
+	 */
+	mb();
+	mtspr(SPRN_DBAT2U, 0xf0001ffe);
+	mtspr(SPRN_DBAT2L, 0xf000002a);
+	mb();
+}
+
+void __init
+mpc52xx_map_io(void)
+{
+	/* Here we only map the MBAR */
+	io_block_mapping(
+		MPC52xx_MBAR_VIRT, MPC52xx_MBAR, MPC52xx_MBAR_SIZE, _PAGE_IO);
+}
+
+
+#ifdef CONFIG_SERIAL_TEXT_DEBUG
+#ifndef MPC52xx_PF_CONSOLE_PORT
+#error "mpc52xx PSC for console not selected"
+#endif
+
+static void
+mpc52xx_psc_putc(struct mpc52xx_psc __iomem *psc, unsigned char c)
+{
+	while (!(in_be16(&psc->mpc52xx_psc_status) &
+	         MPC52xx_PSC_SR_TXRDY));
+	out_8(&psc->mpc52xx_psc_buffer_8, c);
+}
+
+void
+mpc52xx_progress(char *s, unsigned short hex)
+{
+	char c;
+	struct mpc52xx_psc __iomem *psc;
+
+	psc = MPC52xx_VA(MPC52xx_PSCx_OFFSET(MPC52xx_PF_CONSOLE_PORT));
+
+	while ((c = *s++) != 0) {
+		if (c == '\n')
+			mpc52xx_psc_putc(psc, '\r');
+		mpc52xx_psc_putc(psc, c);
+	}
+
+	mpc52xx_psc_putc(psc, '\r');
+	mpc52xx_psc_putc(psc, '\n');
+}
+
+#endif  /* CONFIG_SERIAL_TEXT_DEBUG */
+
+
+unsigned long __init
+mpc52xx_find_end_of_memory(void)
+{
+	u32 ramsize = __res.bi_memsize;
+
+	/*
+	 * if bootloader passed a memsize, just use it
+	 * else get size from sdram config registers
+	 */
+	if (ramsize == 0) {
+		struct mpc52xx_mmap_ctl __iomem *mmap_ctl;
+		u32 sdram_config_0, sdram_config_1;
+
+		/* Temp BAT2 mapping active when this is called ! */
+		mmap_ctl = MPC52xx_VA(MPC52xx_MMAP_CTL_OFFSET);
+
+		sdram_config_0 = in_be32(&mmap_ctl->sdram0);
+		sdram_config_1 = in_be32(&mmap_ctl->sdram1);
+
+		if ((sdram_config_0 & 0x1f) >= 0x13)
+			ramsize = 1 << ((sdram_config_0 & 0xf) + 17);
+
+		if (((sdram_config_1 & 0x1f) >= 0x13) &&
+				((sdram_config_1 & 0xfff00000) == ramsize))
+			ramsize += 1 << ((sdram_config_1 & 0xf) + 17);
+	}
+
+	return ramsize;
+}
+
+void __init
+mpc52xx_calibrate_decr(void)
+{
+	int current_time, previous_time;
+	int tbl_start, tbl_end;
+	unsigned int xlbfreq, cpufreq, ipbfreq, pcifreq, divisor;
+
+	xlbfreq = __res.bi_busfreq;
+	/* if bootloader didn't pass bus frequencies, calculate them */
+	if (xlbfreq == 0) {
+		/* Get RTC & Clock manager modules */
+		struct mpc52xx_rtc __iomem *rtc;
+		struct mpc52xx_cdm __iomem *cdm;
+
+		rtc = ioremap(MPC52xx_PA(MPC52xx_RTC_OFFSET), MPC52xx_RTC_SIZE);
+		cdm = ioremap(MPC52xx_PA(MPC52xx_CDM_OFFSET), MPC52xx_CDM_SIZE);
+
+		if ((rtc==NULL) || (cdm==NULL))
+			panic("Can't ioremap RTC/CDM while computing bus freq");
+
+		/* Count bus clock during 1/64 sec */
+		out_be32(&rtc->dividers, 0x8f1f0000);	/* Set RTC 64x faster */
+		previous_time = in_be32(&rtc->time);
+		while ((current_time = in_be32(&rtc->time)) == previous_time) ;
+		tbl_start = get_tbl();
+		previous_time = current_time;
+		while ((current_time = in_be32(&rtc->time)) == previous_time) ;
+		tbl_end = get_tbl();
+		out_be32(&rtc->dividers, 0xffff0000);	/* Restore RTC */
+
+		/* Compute all frequency from that & CDM settings */
+		xlbfreq = (tbl_end - tbl_start) << 8;
+		cpufreq = (xlbfreq * core_mult[in_be32(&cdm->rstcfg)&0x1f])/10;
+		ipbfreq = (in_8(&cdm->ipb_clk_sel) & 1) ?
+					xlbfreq / 2 : xlbfreq;
+		switch (in_8(&cdm->pci_clk_sel) & 3) {
+		case 0:
+			pcifreq = ipbfreq;
+			break;
+		case 1:
+			pcifreq = ipbfreq / 2;
+			break;
+		default:
+			pcifreq = xlbfreq / 4;
+			break;
+		}
+		__res.bi_busfreq = xlbfreq;
+		__res.bi_intfreq = cpufreq;
+		__res.bi_ipbfreq = ipbfreq;
+		__res.bi_pcifreq = pcifreq;
+
+		/* Release mapping */
+		iounmap(rtc);
+		iounmap(cdm);
+	}
+
+	divisor = 4;
+
+	tb_ticks_per_jiffy = xlbfreq / HZ / divisor;
+	tb_to_us = mulhwu_scale_factor(xlbfreq / divisor, 1000000);
+}
+
+int mpc52xx_match_psc_function(int psc_idx, const char *func)
+{
+	struct mpc52xx_psc_func *cf = mpc52xx_psc_functions;
+
+	while ((cf->id != -1) && (cf->func != NULL)) {
+		if ((cf->id == psc_idx) && !strcmp(cf->func,func))
+			return 1;
+		cf++;
+	}
+
+	return 0;
+}
diff --git a/arch/ppc/syslib/mpc52xx_sys.c b/arch/ppc/syslib/mpc52xx_sys.c
new file mode 100644
index 000000000000..9a0f90aa8aac
--- /dev/null
+++ b/arch/ppc/syslib/mpc52xx_sys.c
@@ -0,0 +1,38 @@
+/*
+ * arch/ppc/syslib/mpc52xx_sys.c
+ *
+ * Freescale MPC52xx system descriptions
+ *
+ *
+ * Maintainer : Sylvain Munaut <tnt@246tNt.com>
+ *
+ * Copyright (C) 2005 Sylvain Munaut <tnt@246tNt.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <asm/ppc_sys.h>
+
+struct ppc_sys_spec *cur_ppc_sys_spec;
+struct ppc_sys_spec ppc_sys_specs[] = {
+	{
+		.ppc_sys_name	= "5200",
+		.mask		= 0xffff0000,
+		.value		= 0x80110000,
+		.num_devices	= 15,
+		.device_list	= (enum ppc_sys_devices[])
+		{
+			MPC52xx_MSCAN1, MPC52xx_MSCAN2, MPC52xx_SPI,
+			MPC52xx_USB, MPC52xx_BDLC, MPC52xx_PSC1, MPC52xx_PSC2,
+			MPC52xx_PSC3, MPC52xx_PSC4, MPC52xx_PSC5, MPC52xx_PSC6,
+			MPC52xx_FEC, MPC52xx_ATA, MPC52xx_I2C1, MPC52xx_I2C2,
+		},
+	},
+	{	/* default match */
+		.ppc_sys_name	= "",
+		.mask		= 0x00000000,
+		.value		= 0x00000000,
+	},
+};
diff --git a/arch/ppc/syslib/mpc83xx_devices.c b/arch/ppc/syslib/mpc83xx_devices.c
new file mode 100644
index 000000000000..5c1a919eaabf
--- /dev/null
+++ b/arch/ppc/syslib/mpc83xx_devices.c
@@ -0,0 +1,237 @@
+/*
+ * arch/ppc/platforms/83xx/mpc83xx_devices.c
+ *
+ * MPC83xx Device descriptions
+ *
+ * Maintainer: Kumar Gala <kumar.gala@freescale.com>
+ *
+ * Copyright 2005 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/serial_8250.h>
+#include <linux/fsl_devices.h>
+#include <asm/mpc83xx.h>
+#include <asm/irq.h>
+#include <asm/ppc_sys.h>
+
+/* We use offsets for IORESOURCE_MEM since we do not know at compile time
+ * what IMMRBAR is, will get fixed up by mach_mpc83xx_fixup
+ */
+
+static struct gianfar_platform_data mpc83xx_tsec1_pdata = {
+	.device_flags = FSL_GIANFAR_DEV_HAS_GIGABIT |
+	    FSL_GIANFAR_DEV_HAS_COALESCE | FSL_GIANFAR_DEV_HAS_RMON |
+	    FSL_GIANFAR_DEV_HAS_MULTI_INTR,
+	.phy_reg_addr = 0x24000,
+};
+
+static struct gianfar_platform_data mpc83xx_tsec2_pdata = {
+	.device_flags = FSL_GIANFAR_DEV_HAS_GIGABIT |
+	    FSL_GIANFAR_DEV_HAS_COALESCE | FSL_GIANFAR_DEV_HAS_RMON |
+	    FSL_GIANFAR_DEV_HAS_MULTI_INTR,
+	.phy_reg_addr = 0x24000,
+};
+
+static struct fsl_i2c_platform_data mpc83xx_fsl_i2c1_pdata = {
+	.device_flags = FSL_I2C_DEV_SEPARATE_DFSRR,
+};
+
+static struct fsl_i2c_platform_data mpc83xx_fsl_i2c2_pdata = {
+	.device_flags = FSL_I2C_DEV_SEPARATE_DFSRR,
+};
+
+static struct plat_serial8250_port serial_platform_data[] = {
+	[0] = {
+		.mapbase	= 0x4500,
+		.irq		= MPC83xx_IRQ_UART1,
+		.iotype		= UPIO_MEM,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+	},
+	[1] = {
+		.mapbase	= 0x4600,
+		.irq		= MPC83xx_IRQ_UART2,
+		.iotype		= UPIO_MEM,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+	},
+};
+
+struct platform_device ppc_sys_platform_devices[] = {
+	[MPC83xx_TSEC1] = {
+		.name = "fsl-gianfar",
+		.id	= 1,
+		.dev.platform_data = &mpc83xx_tsec1_pdata,
+		.num_resources	 = 4,
+		.resource = (struct resource[]) {
+			{
+				.start	= 0x24000,
+				.end	= 0x24fff,
+				.flags	= IORESOURCE_MEM,
+			},
+			{
+				.name	= "tx",
+				.start	= MPC83xx_IRQ_TSEC1_TX,
+				.end	= MPC83xx_IRQ_TSEC1_TX,
+				.flags	= IORESOURCE_IRQ,
+			},
+			{
+				.name	= "rx",
+				.start	= MPC83xx_IRQ_TSEC1_RX,
+				.end	= MPC83xx_IRQ_TSEC1_RX,
+				.flags	= IORESOURCE_IRQ,
+			},
+			{
+				.name	= "error",
+				.start	= MPC83xx_IRQ_TSEC1_ERROR,
+				.end	= MPC83xx_IRQ_TSEC1_ERROR,
+				.flags	= IORESOURCE_IRQ,
+			},
+		},
+	},
+	[MPC83xx_TSEC2] = {
+		.name = "fsl-gianfar",
+		.id	= 2,
+		.dev.platform_data = &mpc83xx_tsec2_pdata,
+		.num_resources	 = 4,
+		.resource = (struct resource[]) {
+			{
+				.start	= 0x25000,
+				.end	= 0x25fff,
+				.flags	= IORESOURCE_MEM,
+			},
+			{
+				.name	= "tx",
+				.start	= MPC83xx_IRQ_TSEC2_TX,
+				.end	= MPC83xx_IRQ_TSEC2_TX,
+				.flags	= IORESOURCE_IRQ,
+			},
+			{
+				.name	= "rx",
+				.start	= MPC83xx_IRQ_TSEC2_RX,
+				.end	= MPC83xx_IRQ_TSEC2_RX,
+				.flags	= IORESOURCE_IRQ,
+			},
+			{
+				.name	= "error",
+				.start	= MPC83xx_IRQ_TSEC2_ERROR,
+				.end	= MPC83xx_IRQ_TSEC2_ERROR,
+				.flags	= IORESOURCE_IRQ,
+			},
+		},
+	},
+	[MPC83xx_IIC1] = {
+		.name = "fsl-i2c",
+		.id	= 1,
+		.dev.platform_data = &mpc83xx_fsl_i2c1_pdata,
+		.num_resources	 = 2,
+		.resource = (struct resource[]) {
+			{
+				.start	= 0x3000,
+				.end	= 0x30ff,
+				.flags	= IORESOURCE_MEM,
+			},
+			{
+				.start	= MPC83xx_IRQ_IIC1,
+				.end	= MPC83xx_IRQ_IIC1,
+				.flags	= IORESOURCE_IRQ,
+			},
+		},
+	},
+	[MPC83xx_IIC2] = {
+		.name = "fsl-i2c",
+		.id	= 2,
+		.dev.platform_data = &mpc83xx_fsl_i2c2_pdata,
+		.num_resources	 = 2,
+		.resource = (struct resource[]) {
+			{
+				.start	= 0x3100,
+				.end	= 0x31ff,
+				.flags	= IORESOURCE_MEM,
+			},
+			{
+				.start	= MPC83xx_IRQ_IIC2,
+				.end	= MPC83xx_IRQ_IIC2,
+				.flags	= IORESOURCE_IRQ,
+			},
+		},
+	},
+	[MPC83xx_DUART] = {
+		.name = "serial8250",
+		.id	= 0,
+		.dev.platform_data = serial_platform_data,
+	},
+	[MPC83xx_SEC2] = {
+		.name = "fsl-sec2",
+		.id	= 1,
+		.num_resources	 = 2,
+		.resource = (struct resource[]) {
+			{
+				.start	= 0x30000,
+				.end	= 0x3ffff,
+				.flags	= IORESOURCE_MEM,
+			},
+			{
+				.start	= MPC83xx_IRQ_SEC2,
+				.end	= MPC83xx_IRQ_SEC2,
+				.flags	= IORESOURCE_IRQ,
+			},
+		},
+	},
+	[MPC83xx_USB2_DR] = {
+		.name = "fsl-usb2-dr",
+		.id	= 1,
+		.num_resources	 = 2,
+		.resource = (struct resource[]) {
+			{
+				.start	= 0x22000,
+				.end	= 0x22fff,
+				.flags	= IORESOURCE_MEM,
+			},
+			{
+				.start	= MPC83xx_IRQ_USB2_DR,
+				.end	= MPC83xx_IRQ_USB2_DR,
+				.flags	= IORESOURCE_IRQ,
+			},
+		},
+	},
+	[MPC83xx_USB2_MPH] = {
+		.name = "fsl-usb2-mph",
+		.id	= 1,
+		.num_resources	 = 2,
+		.resource = (struct resource[]) {
+			{
+				.start	= 0x23000,
+				.end	= 0x23fff,
+				.flags	= IORESOURCE_MEM,
+			},
+			{
+				.start	= MPC83xx_IRQ_USB2_MPH,
+				.end	= MPC83xx_IRQ_USB2_MPH,
+				.flags	= IORESOURCE_IRQ,
+			},
+		},
+	},
+};
+
+static int __init mach_mpc83xx_fixup(struct platform_device *pdev)
+{
+	ppc_sys_fixup_mem_resource(pdev, immrbar);
+	return 0;
+}
+
+static int __init mach_mpc83xx_init(void)
+{
+	if (ppc_md.progress)
+		ppc_md.progress("mach_mpc83xx_init:enter", 0);
+	ppc_sys_device_fixup = mach_mpc83xx_fixup;
+	return 0;
+}
+
+postcore_initcall(mach_mpc83xx_init);
diff --git a/arch/ppc/syslib/mpc83xx_sys.c b/arch/ppc/syslib/mpc83xx_sys.c
new file mode 100644
index 000000000000..29aa63350025
--- /dev/null
+++ b/arch/ppc/syslib/mpc83xx_sys.c
@@ -0,0 +1,100 @@
+/*
+ * arch/ppc/platforms/83xx/mpc83xx_sys.c
+ *
+ * MPC83xx System descriptions
+ *
+ * Maintainer: Kumar Gala <kumar.gala@freescale.com>
+ *
+ * Copyright 2005 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <asm/ppc_sys.h>
+
+struct ppc_sys_spec *cur_ppc_sys_spec;
+struct ppc_sys_spec ppc_sys_specs[] = {
+	{
+		.ppc_sys_name	= "8349E",
+		.mask 		= 0xFFFF0000,
+		.value 		= 0x80500000,
+		.num_devices	= 8,
+		.device_list	= (enum ppc_sys_devices[])
+		{
+			MPC83xx_TSEC1, MPC83xx_TSEC2, MPC83xx_IIC1,
+			MPC83xx_IIC2, MPC83xx_DUART, MPC83xx_SEC2,
+			MPC83xx_USB2_DR, MPC83xx_USB2_MPH
+		},
+	},
+	{
+		.ppc_sys_name	= "8349",
+		.mask 		= 0xFFFF0000,
+		.value 		= 0x80510000,
+		.num_devices	= 7,
+		.device_list	= (enum ppc_sys_devices[])
+		{
+			MPC83xx_TSEC1, MPC83xx_TSEC2, MPC83xx_IIC1,
+			MPC83xx_IIC2, MPC83xx_DUART,
+			MPC83xx_USB2_DR, MPC83xx_USB2_MPH
+		},
+	},
+	{
+		.ppc_sys_name	= "8347E",
+		.mask 		= 0xFFFF0000,
+		.value 		= 0x80520000,
+		.num_devices	= 8,
+		.device_list	= (enum ppc_sys_devices[])
+		{
+			MPC83xx_TSEC1, MPC83xx_TSEC2, MPC83xx_IIC1,
+			MPC83xx_IIC2, MPC83xx_DUART, MPC83xx_SEC2,
+			MPC83xx_USB2_DR, MPC83xx_USB2_MPH
+		},
+	},
+	{
+		.ppc_sys_name	= "8347",
+		.mask 		= 0xFFFF0000,
+		.value 		= 0x80530000,
+		.num_devices	= 7,
+		.device_list	= (enum ppc_sys_devices[])
+		{
+			MPC83xx_TSEC1, MPC83xx_TSEC2, MPC83xx_IIC1,
+			MPC83xx_IIC2, MPC83xx_DUART,
+			MPC83xx_USB2_DR, MPC83xx_USB2_MPH
+		},
+	},
+	{
+		.ppc_sys_name	= "8343E",
+		.mask 		= 0xFFFF0000,
+		.value 		= 0x80540000,
+		.num_devices	= 7,
+		.device_list	= (enum ppc_sys_devices[])
+		{
+			MPC83xx_TSEC1, MPC83xx_TSEC2, MPC83xx_IIC1,
+			MPC83xx_IIC2, MPC83xx_DUART, MPC83xx_SEC2,
+			MPC83xx_USB2_DR,
+		},
+	},
+	{
+		.ppc_sys_name	= "8343",
+		.mask 		= 0xFFFF0000,
+		.value 		= 0x80550000,
+		.num_devices	= 6,
+		.device_list	= (enum ppc_sys_devices[])
+		{
+			MPC83xx_TSEC1, MPC83xx_TSEC2, MPC83xx_IIC1,
+			MPC83xx_IIC2, MPC83xx_DUART,
+			MPC83xx_USB2_DR,
+		},
+	},
+	{	/* default match */
+		.ppc_sys_name	= "",
+		.mask 		= 0x00000000,
+		.value 		= 0x00000000,
+	},
+};
diff --git a/arch/ppc/syslib/mpc85xx_devices.c b/arch/ppc/syslib/mpc85xx_devices.c
new file mode 100644
index 000000000000..a231795ee26f
--- /dev/null
+++ b/arch/ppc/syslib/mpc85xx_devices.c
@@ -0,0 +1,552 @@
+/*
+ * arch/ppc/platforms/85xx/mpc85xx_devices.c
+ *
+ * MPC85xx Device descriptions
+ *
+ * Maintainer: Kumar Gala <kumar.gala@freescale.com>
+ *
+ * Copyright 2005 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/serial_8250.h>
+#include <linux/fsl_devices.h>
+#include <asm/mpc85xx.h>
+#include <asm/irq.h>
+#include <asm/ppc_sys.h>
+
+/* We use offsets for IORESOURCE_MEM since we do not know at compile time
+ * what CCSRBAR is, will get fixed up by mach_mpc85xx_fixup
+ */
+
+static struct gianfar_platform_data mpc85xx_tsec1_pdata = {
+	.device_flags = FSL_GIANFAR_DEV_HAS_GIGABIT |
+	    FSL_GIANFAR_DEV_HAS_COALESCE | FSL_GIANFAR_DEV_HAS_RMON |
+	    FSL_GIANFAR_DEV_HAS_MULTI_INTR,
+	.phy_reg_addr = MPC85xx_ENET1_OFFSET,
+};
+
+static struct gianfar_platform_data mpc85xx_tsec2_pdata = {
+	.device_flags = FSL_GIANFAR_DEV_HAS_GIGABIT |
+	    FSL_GIANFAR_DEV_HAS_COALESCE | FSL_GIANFAR_DEV_HAS_RMON |
+	    FSL_GIANFAR_DEV_HAS_MULTI_INTR,
+	.phy_reg_addr = MPC85xx_ENET1_OFFSET,
+};
+
+static struct gianfar_platform_data mpc85xx_fec_pdata = {
+	.phy_reg_addr = MPC85xx_ENET1_OFFSET,
+};
+
+static struct fsl_i2c_platform_data mpc85xx_fsl_i2c_pdata = {
+	.device_flags = FSL_I2C_DEV_SEPARATE_DFSRR,
+};
+
+static struct plat_serial8250_port serial_platform_data[] = {
+	[0] = {
+		.mapbase	= 0x4500,
+		.irq		= MPC85xx_IRQ_DUART,
+		.iotype		= UPIO_MEM,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ,
+	},
+	[1] = {
+		.mapbase	= 0x4600,
+		.irq		= MPC85xx_IRQ_DUART,
+		.iotype		= UPIO_MEM,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ,
+	},
+};
+
+struct platform_device ppc_sys_platform_devices[] = {
+	[MPC85xx_TSEC1] = {
+		.name = "fsl-gianfar",
+		.id	= 1,
+		.dev.platform_data = &mpc85xx_tsec1_pdata,
+		.num_resources	 = 4,
+		.resource = (struct resource[]) {
+			{
+				.start	= MPC85xx_ENET1_OFFSET,
+				.end	= MPC85xx_ENET1_OFFSET +
+						MPC85xx_ENET1_SIZE - 1,
+				.flags	= IORESOURCE_MEM,
+			},
+			{
+				.name	= "tx",
+				.start	= MPC85xx_IRQ_TSEC1_TX,
+				.end	= MPC85xx_IRQ_TSEC1_TX,
+				.flags	= IORESOURCE_IRQ,
+			},
+			{
+				.name	= "rx",
+				.start	= MPC85xx_IRQ_TSEC1_RX,
+				.end	= MPC85xx_IRQ_TSEC1_RX,
+				.flags	= IORESOURCE_IRQ,
+			},
+			{
+				.name	= "error",
+				.start	= MPC85xx_IRQ_TSEC1_ERROR,
+				.end	= MPC85xx_IRQ_TSEC1_ERROR,
+				.flags	= IORESOURCE_IRQ,
+			},
+		},
+	},
+	[MPC85xx_TSEC2] = {
+		.name = "fsl-gianfar",
+		.id	= 2,
+		.dev.platform_data = &mpc85xx_tsec2_pdata,
+		.num_resources	 = 4,
+		.resource = (struct resource[]) {
+			{
+				.start	= MPC85xx_ENET2_OFFSET,
+				.end	= MPC85xx_ENET2_OFFSET +
+						MPC85xx_ENET2_SIZE - 1,
+				.flags	= IORESOURCE_MEM,
+			},
+			{
+				.name	= "tx",
+				.start	= MPC85xx_IRQ_TSEC2_TX,
+				.end	= MPC85xx_IRQ_TSEC2_TX,
+				.flags	= IORESOURCE_IRQ,
+			},
+			{
+				.name	= "rx",
+				.start	= MPC85xx_IRQ_TSEC2_RX,
+				.end	= MPC85xx_IRQ_TSEC2_RX,
+				.flags	= IORESOURCE_IRQ,
+			},
+			{
+				.name	= "error",
+				.start	= MPC85xx_IRQ_TSEC2_ERROR,
+				.end	= MPC85xx_IRQ_TSEC2_ERROR,
+				.flags	= IORESOURCE_IRQ,
+			},
+		},
+	},
+	[MPC85xx_FEC] =	{
+		.name = "fsl-gianfar",
+		.id	= 3,
+		.dev.platform_data = &mpc85xx_fec_pdata,
+		.num_resources	 = 2,
+		.resource = (struct resource[]) {
+			{
+				.start	= MPC85xx_ENET3_OFFSET,
+				.end	= MPC85xx_ENET3_OFFSET +
+						MPC85xx_ENET3_SIZE - 1,
+				.flags	= IORESOURCE_MEM,
+
+			},
+			{
+				.start	= MPC85xx_IRQ_FEC,
+				.end	= MPC85xx_IRQ_FEC,
+				.flags	= IORESOURCE_IRQ,
+			},
+		},
+	},
+	[MPC85xx_IIC1] = {
+		.name = "fsl-i2c",
+		.id	= 1,
+		.dev.platform_data = &mpc85xx_fsl_i2c_pdata,
+		.num_resources	 = 2,
+		.resource = (struct resource[]) {
+			{
+				.start	= MPC85xx_IIC1_OFFSET,
+				.end	= MPC85xx_IIC1_OFFSET +
+						MPC85xx_IIC1_SIZE - 1,
+				.flags	= IORESOURCE_MEM,
+			},
+			{
+				.start	= MPC85xx_IRQ_IIC1,
+				.end	= MPC85xx_IRQ_IIC1,
+				.flags	= IORESOURCE_IRQ,
+			},
+		},
+	},
+	[MPC85xx_DMA0] = {
+		.name = "fsl-dma",
+		.id	= 0,
+		.num_resources	 = 2,
+		.resource = (struct resource[]) {
+			{
+				.start	= MPC85xx_DMA0_OFFSET,
+				.end	= MPC85xx_DMA0_OFFSET +
+						MPC85xx_DMA0_SIZE - 1,
+				.flags	= IORESOURCE_MEM,
+			},
+			{
+				.start	= MPC85xx_IRQ_DMA0,
+				.end	= MPC85xx_IRQ_DMA0,
+				.flags	= IORESOURCE_IRQ,
+			},
+		},
+	},
+	[MPC85xx_DMA1] = {
+		.name = "fsl-dma",
+		.id	= 1,
+		.num_resources	 = 2,
+		.resource = (struct resource[]) {
+			{
+				.start	= MPC85xx_DMA1_OFFSET,
+				.end	= MPC85xx_DMA1_OFFSET +
+						MPC85xx_DMA1_SIZE - 1,
+				.flags	= IORESOURCE_MEM,
+			},
+			{
+				.start	= MPC85xx_IRQ_DMA1,
+				.end	= MPC85xx_IRQ_DMA1,
+				.flags	= IORESOURCE_IRQ,
+			},
+		},
+	},
+	[MPC85xx_DMA2] = {
+		.name = "fsl-dma",
+		.id	= 2,
+		.num_resources	 = 2,
+		.resource = (struct resource[]) {
+			{
+				.start	= MPC85xx_DMA2_OFFSET,
+				.end	= MPC85xx_DMA2_OFFSET +
+						MPC85xx_DMA2_SIZE - 1,
+				.flags	= IORESOURCE_MEM,
+			},
+			{
+				.start	= MPC85xx_IRQ_DMA2,
+				.end	= MPC85xx_IRQ_DMA2,
+				.flags	= IORESOURCE_IRQ,
+			},
+		},
+	},
+	[MPC85xx_DMA3] = {
+		.name = "fsl-dma",
+		.id	= 3,
+		.num_resources	 = 2,
+		.resource = (struct resource[]) {
+			{
+				.start	= MPC85xx_DMA3_OFFSET,
+				.end	= MPC85xx_DMA3_OFFSET +
+						MPC85xx_DMA3_SIZE - 1,
+				.flags	= IORESOURCE_MEM,
+			},
+			{
+				.start	= MPC85xx_IRQ_DMA3,
+				.end	= MPC85xx_IRQ_DMA3,
+				.flags	= IORESOURCE_IRQ,
+			},
+		},
+	},
+	[MPC85xx_DUART] = {
+		.name = "serial8250",
+		.id	= 0,
+		.dev.platform_data = serial_platform_data,
+	},
+	[MPC85xx_PERFMON] = {
+		.name = "fsl-perfmon",
+		.id	= 1,
+		.num_resources	 = 2,
+		.resource = (struct resource[]) {
+			{
+				.start	= MPC85xx_PERFMON_OFFSET,
+				.end	= MPC85xx_PERFMON_OFFSET +
+						MPC85xx_PERFMON_SIZE - 1,
+				.flags	= IORESOURCE_MEM,
+			},
+			{
+				.start	= MPC85xx_IRQ_PERFMON,
+				.end	= MPC85xx_IRQ_PERFMON,
+				.flags	= IORESOURCE_IRQ,
+			},
+		},
+	},
+	[MPC85xx_SEC2] = {
+		.name = "fsl-sec2",
+		.id	= 1,
+		.num_resources	 = 2,
+		.resource = (struct resource[]) {
+			{
+				.start	= MPC85xx_SEC2_OFFSET,
+				.end	= MPC85xx_SEC2_OFFSET +
+						MPC85xx_SEC2_SIZE - 1,
+				.flags	= IORESOURCE_MEM,
+			},
+			{
+				.start	= MPC85xx_IRQ_SEC2,
+				.end	= MPC85xx_IRQ_SEC2,
+				.flags	= IORESOURCE_IRQ,
+			},
+		},
+	},
+#ifdef CONFIG_CPM2
+	[MPC85xx_CPM_FCC1] = {
+		.name = "fsl-cpm-fcc",
+		.id	= 1,
+		.num_resources	 = 3,
+		.resource = (struct resource[]) {
+			{
+				.start	= 0x91300,
+				.end	= 0x9131F,
+				.flags	= IORESOURCE_MEM,
+			},
+			{
+				.start	= 0x91380,
+				.end	= 0x9139F,
+				.flags	= IORESOURCE_MEM,
+			},
+			{
+				.start	= SIU_INT_FCC1,
+				.end	= SIU_INT_FCC1,
+				.flags	= IORESOURCE_IRQ,
+			},
+		},
+	},
+	[MPC85xx_CPM_FCC2] = {
+		.name = "fsl-cpm-fcc",
+		.id	= 2,
+		.num_resources	 = 3,
+		.resource = (struct resource[]) {
+			{
+				.start	= 0x91320,
+				.end	= 0x9133F,
+				.flags	= IORESOURCE_MEM,
+			},
+			{
+				.start	= 0x913A0,
+				.end	= 0x913CF,
+				.flags	= IORESOURCE_MEM,
+			},
+			{
+				.start	= SIU_INT_FCC2,
+				.end	= SIU_INT_FCC2,
+				.flags	= IORESOURCE_IRQ,
+			},
+		},
+	},
+	[MPC85xx_CPM_FCC3] = {
+		.name = "fsl-cpm-fcc",
+		.id	= 3,
+		.num_resources	 = 3,
+		.resource = (struct resource[]) {
+			{
+				.start	= 0x91340,
+				.end	= 0x9135F,
+				.flags	= IORESOURCE_MEM,
+			},
+			{
+				.start	= 0x913D0,
+				.end	= 0x913FF,
+				.flags	= IORESOURCE_MEM,
+			},
+			{
+				.start	= SIU_INT_FCC3,
+				.end	= SIU_INT_FCC3,
+				.flags	= IORESOURCE_IRQ,
+			},
+		},
+	},
+	[MPC85xx_CPM_I2C] = {
+		.name = "fsl-cpm-i2c",
+		.id	= 1,
+		.num_resources	 = 2,
+		.resource = (struct resource[]) {
+			{
+				.start	= 0x91860,
+				.end	= 0x918BF,
+				.flags	= IORESOURCE_MEM,
+			},
+			{
+				.start	= SIU_INT_I2C,
+				.end	= SIU_INT_I2C,
+				.flags	= IORESOURCE_IRQ,
+			},
+		},
+	},
+	[MPC85xx_CPM_SCC1] = {
+		.name = "fsl-cpm-scc",
+		.id	= 1,
+		.num_resources	 = 2,
+		.resource = (struct resource[]) {
+			{
+				.start	= 0x91A00,
+				.end	= 0x91A1F,
+				.flags	= IORESOURCE_MEM,
+			},
+			{
+				.start	= SIU_INT_SCC1,
+				.end	= SIU_INT_SCC1,
+				.flags	= IORESOURCE_IRQ,
+			},
+		},
+	},
+	[MPC85xx_CPM_SCC2] = {
+		.name = "fsl-cpm-scc",
+		.id	= 2,
+		.num_resources	 = 2,
+		.resource = (struct resource[]) {
+			{
+				.start	= 0x91A20,
+				.end	= 0x91A3F,
+				.flags	= IORESOURCE_MEM,
+			},
+			{
+				.start	= SIU_INT_SCC2,
+				.end	= SIU_INT_SCC2,
+				.flags	= IORESOURCE_IRQ,
+			},
+		},
+	},
+	[MPC85xx_CPM_SCC3] = {
+		.name = "fsl-cpm-scc",
+		.id	= 3,
+		.num_resources	 = 2,
+		.resource = (struct resource[]) {
+			{
+				.start	= 0x91A40,
+				.end	= 0x91A5F,
+				.flags	= IORESOURCE_MEM,
+			},
+			{
+				.start	= SIU_INT_SCC3,
+				.end	= SIU_INT_SCC3,
+				.flags	= IORESOURCE_IRQ,
+			},
+		},
+	},
+	[MPC85xx_CPM_SCC4] = {
+		.name = "fsl-cpm-scc",
+		.id	= 4,
+		.num_resources	 = 2,
+		.resource = (struct resource[]) {
+			{
+				.start	= 0x91A60,
+				.end	= 0x91A7F,
+				.flags	= IORESOURCE_MEM,
+			},
+			{
+				.start	= SIU_INT_SCC4,
+				.end	= SIU_INT_SCC4,
+				.flags	= IORESOURCE_IRQ,
+			},
+		},
+	},
+	[MPC85xx_CPM_SPI] = {
+		.name = "fsl-cpm-spi",
+		.id	= 1,
+		.num_resources	 = 2,
+		.resource = (struct resource[]) {
+			{
+				.start	= 0x91AA0,
+				.end	= 0x91AFF,
+				.flags	= IORESOURCE_MEM,
+			},
+			{
+				.start	= SIU_INT_SPI,
+				.end	= SIU_INT_SPI,
+				.flags	= IORESOURCE_IRQ,
+			},
+		},
+	},
+	[MPC85xx_CPM_MCC1] = {
+		.name = "fsl-cpm-mcc",
+		.id	= 1,
+		.num_resources	 = 2,
+		.resource = (struct resource[]) {
+			{
+				.start	= 0x91B30,
+				.end	= 0x91B3F,
+				.flags	= IORESOURCE_MEM,
+			},
+			{
+				.start	= SIU_INT_MCC1,
+				.end	= SIU_INT_MCC1,
+				.flags	= IORESOURCE_IRQ,
+			},
+		},
+	},
+	[MPC85xx_CPM_MCC2] = {
+		.name = "fsl-cpm-mcc",
+		.id	= 2,
+		.num_resources	 = 2,
+		.resource = (struct resource[]) {
+			{
+				.start	= 0x91B50,
+				.end	= 0x91B5F,
+				.flags	= IORESOURCE_MEM,
+			},
+			{
+				.start	= SIU_INT_MCC2,
+				.end	= SIU_INT_MCC2,
+				.flags	= IORESOURCE_IRQ,
+			},
+		},
+	},
+	[MPC85xx_CPM_SMC1] = {
+		.name = "fsl-cpm-smc",
+		.id	= 1,
+		.num_resources	 = 2,
+		.resource = (struct resource[]) {
+			{
+				.start	= 0x91A80,
+				.end	= 0x91A8F,
+				.flags	= IORESOURCE_MEM,
+			},
+			{
+				.start	= SIU_INT_SMC1,
+				.end	= SIU_INT_SMC1,
+				.flags	= IORESOURCE_IRQ,
+			},
+		},
+	},
+	[MPC85xx_CPM_SMC2] = {
+		.name = "fsl-cpm-smc",
+		.id	= 2,
+		.num_resources	 = 2,
+		.resource = (struct resource[]) {
+			{
+				.start	= 0x91A90,
+				.end	= 0x91A9F,
+				.flags	= IORESOURCE_MEM,
+			},
+			{
+				.start	= SIU_INT_SMC2,
+				.end	= SIU_INT_SMC2,
+				.flags	= IORESOURCE_IRQ,
+			},
+		},
+	},
+	[MPC85xx_CPM_USB] = {
+		.name = "fsl-cpm-usb",
+		.id	= 2,
+		.num_resources	 = 2,
+		.resource = (struct resource[]) {
+			{
+				.start	= 0x91B60,
+				.end	= 0x91B7F,
+				.flags	= IORESOURCE_MEM,
+			},
+			{
+				.start	= SIU_INT_USB,
+				.end	= SIU_INT_USB,
+				.flags	= IORESOURCE_IRQ,
+			},
+		},
+	},
+#endif /* CONFIG_CPM2 */
+};
+
+static int __init mach_mpc85xx_fixup(struct platform_device *pdev)
+{
+	ppc_sys_fixup_mem_resource(pdev, CCSRBAR);
+	return 0;
+}
+
+static int __init mach_mpc85xx_init(void)
+{
+	ppc_sys_device_fixup = mach_mpc85xx_fixup;
+	return 0;
+}
+
+postcore_initcall(mach_mpc85xx_init);
diff --git a/arch/ppc/syslib/mpc85xx_sys.c b/arch/ppc/syslib/mpc85xx_sys.c
new file mode 100644
index 000000000000..d806a92a9401
--- /dev/null
+++ b/arch/ppc/syslib/mpc85xx_sys.c
@@ -0,0 +1,118 @@
+/*
+ * arch/ppc/platforms/85xx/mpc85xx_sys.c
+ *
+ * MPC85xx System descriptions
+ *
+ * Maintainer: Kumar Gala <kumar.gala@freescale.com>
+ *
+ * Copyright 2005 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <asm/ppc_sys.h>
+
+struct ppc_sys_spec *cur_ppc_sys_spec;
+struct ppc_sys_spec ppc_sys_specs[] = {
+	{
+		.ppc_sys_name	= "8540",
+		.mask 		= 0xFFFF0000,
+		.value 		= 0x80300000,
+		.num_devices	= 10,
+		.device_list	= (enum ppc_sys_devices[])
+		{
+			MPC85xx_TSEC1, MPC85xx_TSEC2, MPC85xx_FEC, MPC85xx_IIC1,
+			MPC85xx_DMA0, MPC85xx_DMA1, MPC85xx_DMA2, MPC85xx_DMA3,
+			MPC85xx_PERFMON, MPC85xx_DUART,
+		},
+	},
+	{
+		.ppc_sys_name	= "8560",
+		.mask 		= 0xFFFF0000,
+		.value 		= 0x80700000,
+		.num_devices	= 19,
+		.device_list	= (enum ppc_sys_devices[])
+		{
+			MPC85xx_TSEC1, MPC85xx_TSEC2, MPC85xx_IIC1,
+			MPC85xx_DMA0, MPC85xx_DMA1, MPC85xx_DMA2, MPC85xx_DMA3,
+			MPC85xx_PERFMON,
+			MPC85xx_CPM_SPI, MPC85xx_CPM_I2C, MPC85xx_CPM_SCC1,
+			MPC85xx_CPM_SCC2, MPC85xx_CPM_SCC3, MPC85xx_CPM_SCC4,
+			MPC85xx_CPM_FCC1, MPC85xx_CPM_FCC2, MPC85xx_CPM_FCC3,
+			MPC85xx_CPM_MCC1, MPC85xx_CPM_MCC2,
+		},
+	},
+	{
+		.ppc_sys_name	= "8541",
+		.mask 		= 0xFFFF0000,
+		.value 		= 0x80720000,
+		.num_devices	= 13,
+		.device_list	= (enum ppc_sys_devices[])
+		{
+			MPC85xx_TSEC1, MPC85xx_TSEC2, MPC85xx_IIC1,
+			MPC85xx_DMA0, MPC85xx_DMA1, MPC85xx_DMA2, MPC85xx_DMA3,
+			MPC85xx_PERFMON, MPC85xx_DUART,
+			MPC85xx_CPM_SPI, MPC85xx_CPM_I2C,
+			MPC85xx_CPM_FCC1, MPC85xx_CPM_FCC2,
+		},
+	},
+	{
+		.ppc_sys_name	= "8541E",
+		.mask 		= 0xFFFF0000,
+		.value 		= 0x807A0000,
+		.num_devices	= 14,
+		.device_list	= (enum ppc_sys_devices[])
+		{
+			MPC85xx_TSEC1, MPC85xx_TSEC2, MPC85xx_IIC1,
+			MPC85xx_DMA0, MPC85xx_DMA1, MPC85xx_DMA2, MPC85xx_DMA3,
+			MPC85xx_PERFMON, MPC85xx_DUART, MPC85xx_SEC2,
+			MPC85xx_CPM_SPI, MPC85xx_CPM_I2C,
+			MPC85xx_CPM_FCC1, MPC85xx_CPM_FCC2,
+		},
+	},
+	{
+		.ppc_sys_name	= "8555",
+		.mask 		= 0xFFFF0000,
+		.value 		= 0x80710000,
+		.num_devices	= 19,
+		.device_list	= (enum ppc_sys_devices[])
+		{
+			MPC85xx_TSEC1, MPC85xx_TSEC2, MPC85xx_IIC1,
+			MPC85xx_DMA0, MPC85xx_DMA1, MPC85xx_DMA2, MPC85xx_DMA3,
+			MPC85xx_PERFMON, MPC85xx_DUART,
+			MPC85xx_CPM_SPI, MPC85xx_CPM_I2C, MPC85xx_CPM_SCC1,
+			MPC85xx_CPM_SCC2, MPC85xx_CPM_SCC3,
+			MPC85xx_CPM_FCC1, MPC85xx_CPM_FCC2,
+			MPC85xx_CPM_SMC1, MPC85xx_CPM_SMC2,
+			MPC85xx_CPM_USB,
+		},
+	},
+	{
+		.ppc_sys_name	= "8555E",
+		.mask 		= 0xFFFF0000,
+		.value 		= 0x80790000,
+		.num_devices	= 20,
+		.device_list	= (enum ppc_sys_devices[])
+		{
+			MPC85xx_TSEC1, MPC85xx_TSEC2, MPC85xx_IIC1,
+			MPC85xx_DMA0, MPC85xx_DMA1, MPC85xx_DMA2, MPC85xx_DMA3,
+			MPC85xx_PERFMON, MPC85xx_DUART, MPC85xx_SEC2,
+			MPC85xx_CPM_SPI, MPC85xx_CPM_I2C, MPC85xx_CPM_SCC1,
+			MPC85xx_CPM_SCC2, MPC85xx_CPM_SCC3,
+			MPC85xx_CPM_FCC1, MPC85xx_CPM_FCC2,
+			MPC85xx_CPM_SMC1, MPC85xx_CPM_SMC2,
+			MPC85xx_CPM_USB,
+		},
+	},
+	{	/* default match */
+		.ppc_sys_name	= "",
+		.mask 		= 0x00000000,
+		.value 		= 0x00000000,
+	},
+};
diff --git a/arch/ppc/syslib/mv64360_pic.c b/arch/ppc/syslib/mv64360_pic.c
new file mode 100644
index 000000000000..74d8996418e9
--- /dev/null
+++ b/arch/ppc/syslib/mv64360_pic.c
@@ -0,0 +1,426 @@
+/*
+ * arch/ppc/kernel/mv64360_pic.c
+ *
+ * Interrupt controller support for Marvell's MV64360.
+ *
+ * Author: Rabeeh Khoury <rabeeh@galileo.co.il>
+ * Based on MV64360 PIC written by
+ * Chris Zankel <chris@mvista.com>
+ * Mark A. Greer <mgreer@mvista.com>
+ *
+ * Copyright 2004 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/*
+ * This file contains the specific functions to support the MV64360
+ * interrupt controller.
+ *
+ * The MV64360 has two main interrupt registers (high and low) that
+ * summarizes the interrupts generated by the units of the MV64360.
+ * Each bit is assigned to an interrupt number, where the low register
+ * are assigned from IRQ0 to IRQ31 and the high cause register
+ * from IRQ32 to IRQ63
+ * The GPP (General Purpose Pins) interrupts are assigned from IRQ64 (GPP0)
+ * to IRQ95 (GPP31).
+ * get_irq() returns the lowest interrupt number that is currently asserted.
+ *
+ * Note:
+ *  - This driver does not initialize the GPP when used as an interrupt
+ *    input.
+ */
+
+#include <linux/stddef.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/signal.h>
+#include <linux/stddef.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+
+#include <asm/io.h>
+#include <asm/processor.h>
+#include <asm/system.h>
+#include <asm/irq.h>
+#include <asm/mv64x60.h>
+
+#ifdef CONFIG_IRQ_ALL_CPUS
+#error "The mv64360 does not support distribution of IRQs on all CPUs"
+#endif
+/* ========================== forward declaration ========================== */
+
+static void mv64360_unmask_irq(unsigned int);
+static void mv64360_mask_irq(unsigned int);
+static irqreturn_t mv64360_cpu_error_int_handler(int, void *, struct pt_regs *);
+static irqreturn_t mv64360_sram_error_int_handler(int, void *,
+						  struct pt_regs *);
+static irqreturn_t mv64360_pci_error_int_handler(int, void *, struct pt_regs *);
+
+/* ========================== local declarations =========================== */
+
+struct hw_interrupt_type mv64360_pic = {
+	.typename = " mv64360  ",
+	.enable   = mv64360_unmask_irq,
+	.disable  = mv64360_mask_irq,
+	.ack      = mv64360_mask_irq,
+	.end      = mv64360_unmask_irq,
+};
+
+#define CPU_INTR_STR	"mv64360 cpu interface error"
+#define SRAM_INTR_STR	"mv64360 internal sram error"
+#define PCI0_INTR_STR	"mv64360 pci 0 error"
+#define PCI1_INTR_STR	"mv64360 pci 1 error"
+
+static struct mv64x60_handle bh;
+
+u32 mv64360_irq_base = 0;	/* MV64360 handles the next 96 IRQs from here */
+
+/* mv64360_init_irq()
+ *
+ * This function initializes the interrupt controller. It assigns
+ * all interrupts from IRQ0 to IRQ95 to the mv64360 interrupt controller.
+ *
+ * Input Variable(s):
+ *  None.
+ *
+ * Outpu. Variable(s):
+ *  None.
+ *
+ * Returns:
+ *  void
+ *
+ * Note:
+ *  We register all GPP inputs as interrupt source, but disable them.
+ */
+void __init
+mv64360_init_irq(void)
+{
+	int i;
+
+	if (ppc_md.progress)
+		ppc_md.progress("mv64360_init_irq: enter", 0x0);
+
+	bh.v_base = mv64x60_get_bridge_vbase();
+
+	ppc_cached_irq_mask[0] = 0;
+	ppc_cached_irq_mask[1] = 0x0f000000;	/* Enable GPP intrs */
+	ppc_cached_irq_mask[2] = 0;
+
+	/* disable all interrupts and clear current interrupts */
+	mv64x60_write(&bh, MV64x60_GPP_INTR_CAUSE, 0);
+	mv64x60_write(&bh, MV64x60_GPP_INTR_MASK, ppc_cached_irq_mask[2]);
+	mv64x60_write(&bh, MV64360_IC_CPU0_INTR_MASK_LO,ppc_cached_irq_mask[0]);
+	mv64x60_write(&bh, MV64360_IC_CPU0_INTR_MASK_HI,ppc_cached_irq_mask[1]);
+
+	/* All interrupts are level interrupts */
+	for (i = mv64360_irq_base; i < (mv64360_irq_base + 96); i++) {
+		irq_desc[i].status |= IRQ_LEVEL;
+		irq_desc[i].handler = &mv64360_pic;
+	}
+
+	if (ppc_md.progress)
+		ppc_md.progress("mv64360_init_irq: exit", 0x0);
+}
+
+/* mv64360_get_irq()
+ *
+ * This function returns the lowest interrupt number of all interrupts that
+ * are currently asserted.
+ *
+ * Input Variable(s):
+ *  struct pt_regs*	not used
+ *
+ * Output Variable(s):
+ *  None.
+ *
+ * Returns:
+ *  int	<interrupt number> or -2 (bogus interrupt)
+ *
+ */
+int
+mv64360_get_irq(struct pt_regs *regs)
+{
+	int irq;
+	int irq_gpp;
+
+#ifdef CONFIG_SMP
+	/*
+	 * Second CPU gets only doorbell (message) interrupts.
+	 * The doorbell interrupt is BIT28 in the main interrupt low cause reg.
+	 */
+	int cpu_nr = smp_processor_id();
+	if (cpu_nr == 1) {
+		if (!(mv64x60_read(&bh, MV64360_IC_MAIN_CAUSE_LO) &
+		      (1 << MV64x60_IRQ_DOORBELL)))
+			return -1;
+		return mv64360_irq_base + MV64x60_IRQ_DOORBELL;
+	}
+#endif
+
+	irq = mv64x60_read(&bh, MV64360_IC_MAIN_CAUSE_LO);
+	irq = __ilog2((irq & 0x3dfffffe) & ppc_cached_irq_mask[0]);
+
+	if (irq == -1) {
+		irq = mv64x60_read(&bh, MV64360_IC_MAIN_CAUSE_HI);
+		irq = __ilog2((irq & 0x1f0003f7) & ppc_cached_irq_mask[1]);
+
+		if (irq == -1)
+			irq = -2; /* bogus interrupt, should never happen */
+		else {
+			if ((irq >= 24) && (irq < MV64x60_IRQ_DOORBELL)) {
+				irq_gpp = mv64x60_read(&bh,
+					MV64x60_GPP_INTR_CAUSE);
+				irq_gpp = __ilog2(irq_gpp &
+					ppc_cached_irq_mask[2]);
+
+				if (irq_gpp == -1)
+					irq = -2;
+				else {
+					irq = irq_gpp + 64;
+					mv64x60_write(&bh,
+						MV64x60_GPP_INTR_CAUSE,
+						~(1 << (irq - 64)));
+				}
+			}
+			else
+				irq += 32;
+		}
+	}
+
+	(void)mv64x60_read(&bh, MV64x60_GPP_INTR_CAUSE);
+
+	if (irq < 0)
+		return (irq);
+	else
+		return (mv64360_irq_base + irq);
+}
+
+/* mv64360_unmask_irq()
+ *
+ * This function enables an interrupt.
+ *
+ * Input Variable(s):
+ *  unsigned int	interrupt number (IRQ0...IRQ95).
+ *
+ * Output Variable(s):
+ *  None.
+ *
+ * Returns:
+ *  void
+ */
+static void
+mv64360_unmask_irq(unsigned int irq)
+{
+#ifdef CONFIG_SMP
+	/* second CPU gets only doorbell interrupts */
+	if ((irq - mv64360_irq_base) == MV64x60_IRQ_DOORBELL) {
+		mv64x60_set_bits(&bh, MV64360_IC_CPU1_INTR_MASK_LO,
+				 (1 << MV64x60_IRQ_DOORBELL));
+		return;
+	}
+#endif
+	irq -= mv64360_irq_base;
+
+	if (irq > 31) {
+		if (irq > 63) /* unmask GPP irq */
+			mv64x60_write(&bh, MV64x60_GPP_INTR_MASK,
+				ppc_cached_irq_mask[2] |= (1 << (irq - 64)));
+		else /* mask high interrupt register */
+			mv64x60_write(&bh, MV64360_IC_CPU0_INTR_MASK_HI,
+				ppc_cached_irq_mask[1] |= (1 << (irq - 32)));
+	}
+	else /* mask low interrupt register */
+		mv64x60_write(&bh, MV64360_IC_CPU0_INTR_MASK_LO,
+			ppc_cached_irq_mask[0] |= (1 << irq));
+
+	(void)mv64x60_read(&bh, MV64x60_GPP_INTR_MASK);
+	return;
+}
+
+/* mv64360_mask_irq()
+ *
+ * This function disables the requested interrupt.
+ *
+ * Input Variable(s):
+ *  unsigned int	interrupt number (IRQ0...IRQ95).
+ *
+ * Output Variable(s):
+ *  None.
+ *
+ * Returns:
+ *  void
+ */
+static void
+mv64360_mask_irq(unsigned int irq)
+{
+#ifdef CONFIG_SMP
+	if ((irq - mv64360_irq_base) == MV64x60_IRQ_DOORBELL) {
+		mv64x60_clr_bits(&bh, MV64360_IC_CPU1_INTR_MASK_LO,
+				 (1 << MV64x60_IRQ_DOORBELL));
+		return;
+	}
+#endif
+	irq -= mv64360_irq_base;
+
+	if (irq > 31) {
+		if (irq > 63) /* mask GPP irq */
+			mv64x60_write(&bh, MV64x60_GPP_INTR_MASK,
+				ppc_cached_irq_mask[2] &= ~(1 << (irq - 64)));
+		else /* mask high interrupt register */
+			mv64x60_write(&bh, MV64360_IC_CPU0_INTR_MASK_HI,
+				ppc_cached_irq_mask[1] &= ~(1 << (irq - 32)));
+	}
+	else /* mask low interrupt register */
+		mv64x60_write(&bh, MV64360_IC_CPU0_INTR_MASK_LO,
+			ppc_cached_irq_mask[0] &= ~(1 << irq));
+
+	(void)mv64x60_read(&bh, MV64x60_GPP_INTR_MASK);
+	return;
+}
+
+static irqreturn_t
+mv64360_cpu_error_int_handler(int irq, void *dev_id, struct pt_regs *regs)
+{
+	printk(KERN_ERR "mv64360_cpu_error_int_handler: %s 0x%08x\n",
+		"Error on CPU interface - Cause regiser",
+		mv64x60_read(&bh, MV64x60_CPU_ERR_CAUSE));
+	printk(KERN_ERR "\tCPU error register dump:\n");
+	printk(KERN_ERR "\tAddress low  0x%08x\n",
+	       mv64x60_read(&bh, MV64x60_CPU_ERR_ADDR_LO));
+	printk(KERN_ERR "\tAddress high 0x%08x\n",
+	       mv64x60_read(&bh, MV64x60_CPU_ERR_ADDR_HI));
+	printk(KERN_ERR "\tData low     0x%08x\n",
+	       mv64x60_read(&bh, MV64x60_CPU_ERR_DATA_LO));
+	printk(KERN_ERR "\tData high    0x%08x\n",
+	       mv64x60_read(&bh, MV64x60_CPU_ERR_DATA_HI));
+	printk(KERN_ERR "\tParity       0x%08x\n",
+	       mv64x60_read(&bh, MV64x60_CPU_ERR_PARITY));
+	mv64x60_write(&bh, MV64x60_CPU_ERR_CAUSE, 0);
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t
+mv64360_sram_error_int_handler(int irq, void *dev_id, struct pt_regs *regs)
+{
+	printk(KERN_ERR "mv64360_sram_error_int_handler: %s 0x%08x\n",
+		"Error in internal SRAM - Cause register",
+		mv64x60_read(&bh, MV64360_SRAM_ERR_CAUSE));
+	printk(KERN_ERR "\tSRAM error register dump:\n");
+	printk(KERN_ERR "\tAddress Low  0x%08x\n",
+	       mv64x60_read(&bh, MV64360_SRAM_ERR_ADDR_LO));
+	printk(KERN_ERR "\tAddress High 0x%08x\n",
+	       mv64x60_read(&bh, MV64360_SRAM_ERR_ADDR_HI));
+	printk(KERN_ERR "\tData Low     0x%08x\n",
+	       mv64x60_read(&bh, MV64360_SRAM_ERR_DATA_LO));
+	printk(KERN_ERR "\tData High    0x%08x\n",
+	       mv64x60_read(&bh, MV64360_SRAM_ERR_DATA_HI));
+	printk(KERN_ERR "\tParity       0x%08x\n",
+		mv64x60_read(&bh, MV64360_SRAM_ERR_PARITY));
+	mv64x60_write(&bh, MV64360_SRAM_ERR_CAUSE, 0);
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t
+mv64360_pci_error_int_handler(int irq, void *dev_id, struct pt_regs *regs)
+{
+	u32 val;
+	unsigned int pci_bus = (unsigned int)dev_id;
+
+	if (pci_bus == 0) {	/* Error on PCI 0 */
+		val = mv64x60_read(&bh, MV64x60_PCI0_ERR_CAUSE);
+		printk(KERN_ERR "%s: Error in PCI %d Interface\n",
+			"mv64360_pci_error_int_handler", pci_bus);
+		printk(KERN_ERR "\tPCI %d error register dump:\n", pci_bus);
+		printk(KERN_ERR "\tCause register 0x%08x\n", val);
+		printk(KERN_ERR "\tAddress Low    0x%08x\n",
+		       mv64x60_read(&bh, MV64x60_PCI0_ERR_ADDR_LO));
+		printk(KERN_ERR "\tAddress High   0x%08x\n",
+		       mv64x60_read(&bh, MV64x60_PCI0_ERR_ADDR_HI));
+		printk(KERN_ERR "\tAttribute      0x%08x\n",
+		       mv64x60_read(&bh, MV64x60_PCI0_ERR_DATA_LO));
+		printk(KERN_ERR "\tCommand        0x%08x\n",
+		       mv64x60_read(&bh, MV64x60_PCI0_ERR_CMD));
+		mv64x60_write(&bh, MV64x60_PCI0_ERR_CAUSE, ~val);
+	}
+	if (pci_bus == 1) {	/* Error on PCI 1 */
+		val = mv64x60_read(&bh, MV64x60_PCI1_ERR_CAUSE);
+		printk(KERN_ERR "%s: Error in PCI %d Interface\n",
+			"mv64360_pci_error_int_handler", pci_bus);
+		printk(KERN_ERR "\tPCI %d error register dump:\n", pci_bus);
+		printk(KERN_ERR "\tCause register 0x%08x\n", val);
+		printk(KERN_ERR "\tAddress Low    0x%08x\n",
+		       mv64x60_read(&bh, MV64x60_PCI1_ERR_ADDR_LO));
+		printk(KERN_ERR "\tAddress High   0x%08x\n",
+		       mv64x60_read(&bh, MV64x60_PCI1_ERR_ADDR_HI));
+		printk(KERN_ERR "\tAttribute      0x%08x\n",
+		       mv64x60_read(&bh, MV64x60_PCI1_ERR_DATA_LO));
+		printk(KERN_ERR "\tCommand        0x%08x\n",
+		       mv64x60_read(&bh, MV64x60_PCI1_ERR_CMD));
+		mv64x60_write(&bh, MV64x60_PCI1_ERR_CAUSE, ~val);
+	}
+	return IRQ_HANDLED;
+}
+
+static int __init
+mv64360_register_hdlrs(void)
+{
+	u32	mask;
+	int	rc;
+
+	/* Clear old errors and register CPU interface error intr handler */
+	mv64x60_write(&bh, MV64x60_CPU_ERR_CAUSE, 0);
+	if ((rc = request_irq(MV64x60_IRQ_CPU_ERR + mv64360_irq_base,
+		mv64360_cpu_error_int_handler, SA_INTERRUPT, CPU_INTR_STR, 0)))
+		printk(KERN_WARNING "Can't register cpu error handler: %d", rc);
+
+	mv64x60_write(&bh, MV64x60_CPU_ERR_MASK, 0);
+	mv64x60_write(&bh, MV64x60_CPU_ERR_MASK, 0x000000ff);
+
+	/* Clear old errors and register internal SRAM error intr handler */
+	mv64x60_write(&bh, MV64360_SRAM_ERR_CAUSE, 0);
+	if ((rc = request_irq(MV64360_IRQ_SRAM_PAR_ERR + mv64360_irq_base,
+		mv64360_sram_error_int_handler,SA_INTERRUPT,SRAM_INTR_STR, 0)))
+		printk(KERN_WARNING "Can't register SRAM error handler: %d",rc);
+
+	/*
+	 * Bit 0 reserved on 64360 and erratum FEr PCI-#11 (PCI internal
+	 * data parity error set incorrectly) on rev 0 & 1 of 64460 requires
+	 * bit 0 to be cleared.
+	 */
+	mask = 0x00a50c24;
+
+	if ((mv64x60_get_bridge_type() == MV64x60_TYPE_MV64460) &&
+		(mv64x60_get_bridge_rev() > 1))
+		mask |= 0x1;	/* enable DPErr on 64460 */
+
+	/* Clear old errors and register PCI 0 error intr handler */
+	mv64x60_write(&bh, MV64x60_PCI0_ERR_CAUSE, 0);
+	if ((rc = request_irq(MV64360_IRQ_PCI0 + mv64360_irq_base,
+			mv64360_pci_error_int_handler,
+			SA_INTERRUPT, PCI0_INTR_STR, (void *)0)))
+		printk(KERN_WARNING "Can't register pci 0 error handler: %d",
+			rc);
+
+	mv64x60_write(&bh, MV64x60_PCI0_ERR_MASK, 0);
+	mv64x60_write(&bh, MV64x60_PCI0_ERR_MASK, mask);
+
+	/* Clear old errors and register PCI 1 error intr handler */
+	mv64x60_write(&bh, MV64x60_PCI1_ERR_CAUSE, 0);
+	if ((rc = request_irq(MV64360_IRQ_PCI1 + mv64360_irq_base,
+			mv64360_pci_error_int_handler,
+			SA_INTERRUPT, PCI1_INTR_STR, (void *)1)))
+		printk(KERN_WARNING "Can't register pci 1 error handler: %d",
+			rc);
+
+	mv64x60_write(&bh, MV64x60_PCI1_ERR_MASK, 0);
+	mv64x60_write(&bh, MV64x60_PCI1_ERR_MASK, mask);
+
+	return 0;
+}
+
+arch_initcall(mv64360_register_hdlrs);
diff --git a/arch/ppc/syslib/mv64x60.c b/arch/ppc/syslib/mv64x60.c
new file mode 100644
index 000000000000..7b241e7876bd
--- /dev/null
+++ b/arch/ppc/syslib/mv64x60.c
@@ -0,0 +1,2392 @@
+/*
+ * arch/ppc/syslib/mv64x60.c
+ *
+ * Common routines for the Marvell/Galileo Discovery line of host bridges
+ * (gt64260, mv64360, mv64460, ...).
+ *
+ * Author: Mark A. Greer <mgreer@mvista.com>
+ *
+ * 2004 (c) MontaVista, Software, Inc.  This file is licensed under
+ * the terms of the GNU General Public License version 2.  This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/bootmem.h>
+#include <linux/spinlock.h>
+#include <linux/mv643xx.h>
+
+#include <asm/byteorder.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+#include <asm/machdep.h>
+#include <asm/pci-bridge.h>
+#include <asm/delay.h>
+#include <asm/mv64x60.h>
+
+
+u8		mv64x60_pci_exclude_bridge = 1;
+spinlock_t	mv64x60_lock = SPIN_LOCK_UNLOCKED;
+
+static phys_addr_t 	mv64x60_bridge_pbase = 0;
+static void 		*mv64x60_bridge_vbase = 0;
+static u32		mv64x60_bridge_type = MV64x60_TYPE_INVALID;
+static u32		mv64x60_bridge_rev = 0;
+
+static u32 gt64260_translate_size(u32 base, u32 size, u32 num_bits);
+static u32 gt64260_untranslate_size(u32 base, u32 size, u32 num_bits);
+static void gt64260_set_pci2mem_window(struct pci_controller *hose, u32 bus,
+	u32 window, u32 base);
+static void gt64260_set_pci2regs_window(struct mv64x60_handle *bh,
+	struct pci_controller *hose, u32 bus, u32 base);
+static u32 gt64260_is_enabled_32bit(struct mv64x60_handle *bh, u32 window);
+static void gt64260_enable_window_32bit(struct mv64x60_handle *bh, u32 window);
+static void gt64260_disable_window_32bit(struct mv64x60_handle *bh, u32 window);
+static void gt64260_enable_window_64bit(struct mv64x60_handle *bh, u32 window);
+static void gt64260_disable_window_64bit(struct mv64x60_handle *bh, u32 window);
+static void gt64260_disable_all_windows(struct mv64x60_handle *bh,
+	struct mv64x60_setup_info *si);
+static void gt64260a_chip_specific_init(struct mv64x60_handle *bh,
+	struct mv64x60_setup_info *si);
+static void gt64260b_chip_specific_init(struct mv64x60_handle *bh,
+	struct mv64x60_setup_info *si);
+
+static u32 mv64360_translate_size(u32 base, u32 size, u32 num_bits);
+static u32 mv64360_untranslate_size(u32 base, u32 size, u32 num_bits);
+static void mv64360_set_pci2mem_window(struct pci_controller *hose, u32 bus,
+	u32 window, u32 base);
+static void mv64360_set_pci2regs_window(struct mv64x60_handle *bh,
+	struct pci_controller *hose, u32 bus, u32 base);
+static u32 mv64360_is_enabled_32bit(struct mv64x60_handle *bh, u32 window);
+static void mv64360_enable_window_32bit(struct mv64x60_handle *bh, u32 window);
+static void mv64360_disable_window_32bit(struct mv64x60_handle *bh, u32 window);
+static void mv64360_enable_window_64bit(struct mv64x60_handle *bh, u32 window);
+static void mv64360_disable_window_64bit(struct mv64x60_handle *bh, u32 window);
+static void mv64360_disable_all_windows(struct mv64x60_handle *bh,
+	struct mv64x60_setup_info *si);
+static void mv64360_config_io2mem_windows(struct mv64x60_handle *bh,
+	struct mv64x60_setup_info *si,
+	u32 mem_windows[MV64x60_CPU2MEM_WINDOWS][2]);
+static void mv64360_set_mpsc2regs_window(struct mv64x60_handle *bh, u32 base);
+static void mv64360_chip_specific_init(struct mv64x60_handle *bh,
+	struct mv64x60_setup_info *si);
+static void mv64460_chip_specific_init(struct mv64x60_handle *bh,
+	struct mv64x60_setup_info *si);
+
+
+/*
+ * Define tables that have the chip-specific info for each type of
+ * Marvell bridge chip.
+ */
+static struct mv64x60_chip_info gt64260a_ci __initdata = { /* GT64260A */
+	.translate_size		= gt64260_translate_size,
+	.untranslate_size	= gt64260_untranslate_size,
+	.set_pci2mem_window	= gt64260_set_pci2mem_window,
+	.set_pci2regs_window	= gt64260_set_pci2regs_window,
+	.is_enabled_32bit	= gt64260_is_enabled_32bit,
+	.enable_window_32bit	= gt64260_enable_window_32bit,
+	.disable_window_32bit	= gt64260_disable_window_32bit,
+	.enable_window_64bit	= gt64260_enable_window_64bit,
+	.disable_window_64bit	= gt64260_disable_window_64bit,
+	.disable_all_windows	= gt64260_disable_all_windows,
+	.chip_specific_init	= gt64260a_chip_specific_init,
+	.window_tab_32bit	= gt64260_32bit_windows,
+	.window_tab_64bit	= gt64260_64bit_windows,
+};
+
+static struct mv64x60_chip_info gt64260b_ci __initdata = { /* GT64260B */
+	.translate_size		= gt64260_translate_size,
+	.untranslate_size	= gt64260_untranslate_size,
+	.set_pci2mem_window	= gt64260_set_pci2mem_window,
+	.set_pci2regs_window	= gt64260_set_pci2regs_window,
+	.is_enabled_32bit	= gt64260_is_enabled_32bit,
+	.enable_window_32bit	= gt64260_enable_window_32bit,
+	.disable_window_32bit	= gt64260_disable_window_32bit,
+	.enable_window_64bit	= gt64260_enable_window_64bit,
+	.disable_window_64bit	= gt64260_disable_window_64bit,
+	.disable_all_windows	= gt64260_disable_all_windows,
+	.chip_specific_init	= gt64260b_chip_specific_init,
+	.window_tab_32bit	= gt64260_32bit_windows,
+	.window_tab_64bit	= gt64260_64bit_windows,
+};
+
+static struct mv64x60_chip_info mv64360_ci __initdata = { /* MV64360 */
+	.translate_size		= mv64360_translate_size,
+	.untranslate_size	= mv64360_untranslate_size,
+	.set_pci2mem_window	= mv64360_set_pci2mem_window,
+	.set_pci2regs_window	= mv64360_set_pci2regs_window,
+	.is_enabled_32bit	= mv64360_is_enabled_32bit,
+	.enable_window_32bit	= mv64360_enable_window_32bit,
+	.disable_window_32bit	= mv64360_disable_window_32bit,
+	.enable_window_64bit	= mv64360_enable_window_64bit,
+	.disable_window_64bit	= mv64360_disable_window_64bit,
+	.disable_all_windows	= mv64360_disable_all_windows,
+	.config_io2mem_windows	= mv64360_config_io2mem_windows,
+	.set_mpsc2regs_window	= mv64360_set_mpsc2regs_window,
+	.chip_specific_init	= mv64360_chip_specific_init,
+	.window_tab_32bit	= mv64360_32bit_windows,
+	.window_tab_64bit	= mv64360_64bit_windows,
+};
+
+static struct mv64x60_chip_info mv64460_ci __initdata = { /* MV64460 */
+	.translate_size		= mv64360_translate_size,
+	.untranslate_size	= mv64360_untranslate_size,
+	.set_pci2mem_window	= mv64360_set_pci2mem_window,
+	.set_pci2regs_window	= mv64360_set_pci2regs_window,
+	.is_enabled_32bit	= mv64360_is_enabled_32bit,
+	.enable_window_32bit	= mv64360_enable_window_32bit,
+	.disable_window_32bit	= mv64360_disable_window_32bit,
+	.enable_window_64bit	= mv64360_enable_window_64bit,
+	.disable_window_64bit	= mv64360_disable_window_64bit,
+	.disable_all_windows	= mv64360_disable_all_windows,
+	.config_io2mem_windows	= mv64360_config_io2mem_windows,
+	.set_mpsc2regs_window	= mv64360_set_mpsc2regs_window,
+	.chip_specific_init	= mv64460_chip_specific_init,
+	.window_tab_32bit	= mv64360_32bit_windows,
+	.window_tab_64bit	= mv64360_64bit_windows,
+};
+
+/*
+ *****************************************************************************
+ *
+ *	Platform Device Definitions
+ *
+ *****************************************************************************
+ */
+#ifdef CONFIG_SERIAL_MPSC
+static struct mpsc_shared_pdata mv64x60_mpsc_shared_pdata = {
+	.mrr_val		= 0x3ffffe38,
+	.rcrr_val		= 0,
+	.tcrr_val		= 0,
+	.intr_cause_val		= 0,
+	.intr_mask_val		= 0,
+};
+
+static struct resource mv64x60_mpsc_shared_resources[] = {
+	/* Do not change the order of the IORESOURCE_MEM resources */
+	[0] = {
+		.name	= "mpsc routing base",
+		.start	= MV64x60_MPSC_ROUTING_OFFSET,
+		.end	= MV64x60_MPSC_ROUTING_OFFSET +
+			MPSC_ROUTING_REG_BLOCK_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.name	= "sdma intr base",
+		.start	= MV64x60_SDMA_INTR_OFFSET,
+		.end	= MV64x60_SDMA_INTR_OFFSET +
+			MPSC_SDMA_INTR_REG_BLOCK_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device mpsc_shared_device = { /* Shared device */
+	.name		= MPSC_SHARED_NAME,
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(mv64x60_mpsc_shared_resources),
+	.resource	= mv64x60_mpsc_shared_resources,
+	.dev = {
+		.platform_data = &mv64x60_mpsc_shared_pdata,
+	},
+};
+
+static struct mpsc_pdata mv64x60_mpsc0_pdata = {
+	.mirror_regs		= 0,
+	.cache_mgmt		= 0,
+	.max_idle		= 0,
+	.default_baud		= 9600,
+	.default_bits		= 8,
+	.default_parity		= 'n',
+	.default_flow		= 'n',
+	.chr_1_val		= 0x00000000,
+	.chr_2_val		= 0x00000000,
+	.chr_10_val		= 0x00000003,
+	.mpcr_val		= 0,
+	.bcr_val		= 0,
+	.brg_can_tune		= 0,
+	.brg_clk_src		= 8,		/* Default to TCLK */
+	.brg_clk_freq		= 100000000,	/* Default to 100 MHz */
+};
+
+static struct resource mv64x60_mpsc0_resources[] = {
+	/* Do not change the order of the IORESOURCE_MEM resources */
+	[0] = {
+		.name	= "mpsc 0 base",
+		.start	= MV64x60_MPSC_0_OFFSET,
+		.end	= MV64x60_MPSC_0_OFFSET + MPSC_REG_BLOCK_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.name	= "sdma 0 base",
+		.start	= MV64x60_SDMA_0_OFFSET,
+		.end	= MV64x60_SDMA_0_OFFSET + MPSC_SDMA_REG_BLOCK_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[2] = {
+		.name	= "brg 0 base",
+		.start	= MV64x60_BRG_0_OFFSET,
+		.end	= MV64x60_BRG_0_OFFSET + MPSC_BRG_REG_BLOCK_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[3] = {
+		.name	= "sdma 0 irq",
+		.start	= MV64x60_IRQ_SDMA_0,
+		.end	= MV64x60_IRQ_SDMA_0,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device mpsc0_device = {
+	.name		= MPSC_CTLR_NAME,
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(mv64x60_mpsc0_resources),
+	.resource	= mv64x60_mpsc0_resources,
+	.dev = {
+		.platform_data = &mv64x60_mpsc0_pdata,
+	},
+};
+
+static struct mpsc_pdata mv64x60_mpsc1_pdata = {
+	.mirror_regs		= 0,
+	.cache_mgmt		= 0,
+	.max_idle		= 0,
+	.default_baud		= 9600,
+	.default_bits		= 8,
+	.default_parity		= 'n',
+	.default_flow		= 'n',
+	.chr_1_val		= 0x00000000,
+	.chr_1_val		= 0x00000000,
+	.chr_2_val		= 0x00000000,
+	.chr_10_val		= 0x00000003,
+	.mpcr_val		= 0,
+	.bcr_val		= 0,
+	.brg_can_tune		= 0,
+	.brg_clk_src		= 8,		/* Default to TCLK */
+	.brg_clk_freq		= 100000000,	/* Default to 100 MHz */
+};
+
+static struct resource mv64x60_mpsc1_resources[] = {
+	/* Do not change the order of the IORESOURCE_MEM resources */
+	[0] = {
+		.name	= "mpsc 1 base",
+		.start	= MV64x60_MPSC_1_OFFSET,
+		.end	= MV64x60_MPSC_1_OFFSET + MPSC_REG_BLOCK_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.name	= "sdma 1 base",
+		.start	= MV64x60_SDMA_1_OFFSET,
+		.end	= MV64x60_SDMA_1_OFFSET + MPSC_SDMA_REG_BLOCK_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[2] = {
+		.name	= "brg 1 base",
+		.start	= MV64x60_BRG_1_OFFSET,
+		.end	= MV64x60_BRG_1_OFFSET + MPSC_BRG_REG_BLOCK_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[3] = {
+		.name	= "sdma 1 irq",
+		.start	= MV64360_IRQ_SDMA_1,
+		.end	= MV64360_IRQ_SDMA_1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device mpsc1_device = {
+	.name		= MPSC_CTLR_NAME,
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(mv64x60_mpsc1_resources),
+	.resource	= mv64x60_mpsc1_resources,
+	.dev = {
+		.platform_data = &mv64x60_mpsc1_pdata,
+	},
+};
+#endif
+
+#ifdef CONFIG_MV643XX_ETH
+static struct resource mv64x60_eth_shared_resources[] = {
+	[0] = {
+		.name	= "ethernet shared base",
+		.start	= MV643XX_ETH_SHARED_REGS,
+		.end	= MV643XX_ETH_SHARED_REGS +
+					MV643XX_ETH_SHARED_REGS_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device mv64x60_eth_shared_device = {
+	.name		= MV643XX_ETH_SHARED_NAME,
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(mv64x60_eth_shared_resources),
+	.resource	= mv64x60_eth_shared_resources,
+};
+
+#ifdef CONFIG_MV643XX_ETH_0
+static struct resource mv64x60_eth0_resources[] = {
+	[0] = {
+		.name	= "eth0 irq",
+		.start	= MV64x60_IRQ_ETH_0,
+		.end	= MV64x60_IRQ_ETH_0,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct mv643xx_eth_platform_data eth0_pd;
+
+static struct platform_device eth0_device = {
+	.name		= MV643XX_ETH_NAME,
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(mv64x60_eth0_resources),
+	.resource	= mv64x60_eth0_resources,
+	.dev = {
+		.platform_data = &eth0_pd,
+	},
+};
+#endif
+
+#ifdef CONFIG_MV643XX_ETH_1
+static struct resource mv64x60_eth1_resources[] = {
+	[0] = {
+		.name	= "eth1 irq",
+		.start	= MV64x60_IRQ_ETH_1,
+		.end	= MV64x60_IRQ_ETH_1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct mv643xx_eth_platform_data eth1_pd;
+
+static struct platform_device eth1_device = {
+	.name		= MV643XX_ETH_NAME,
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(mv64x60_eth1_resources),
+	.resource	= mv64x60_eth1_resources,
+	.dev = {
+		.platform_data = &eth1_pd,
+	},
+};
+#endif
+
+#ifdef CONFIG_MV643XX_ETH_2
+static struct resource mv64x60_eth2_resources[] = {
+	[0] = {
+		.name	= "eth2 irq",
+		.start	= MV64x60_IRQ_ETH_2,
+		.end	= MV64x60_IRQ_ETH_2,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct mv643xx_eth_platform_data eth2_pd;
+
+static struct platform_device eth2_device = {
+	.name		= MV643XX_ETH_NAME,
+	.id		= 2,
+	.num_resources	= ARRAY_SIZE(mv64x60_eth2_resources),
+	.resource	= mv64x60_eth2_resources,
+	.dev = {
+		.platform_data = &eth2_pd,
+	},
+};
+#endif
+#endif
+
+#ifdef	CONFIG_I2C_MV64XXX
+static struct mv64xxx_i2c_pdata mv64xxx_i2c_pdata = {
+	.freq_m			= 8,
+	.freq_n			= 3,
+	.timeout		= 1000, /* Default timeout of 1 second */
+	.retries		= 1,
+};
+
+static struct resource mv64xxx_i2c_resources[] = {
+	/* Do not change the order of the IORESOURCE_MEM resources */
+	[0] = {
+		.name	= "mv64xxx i2c base",
+		.start	= MV64XXX_I2C_OFFSET,
+		.end	= MV64XXX_I2C_OFFSET + MV64XXX_I2C_REG_BLOCK_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.name	= "mv64xxx i2c irq",
+		.start	= MV64x60_IRQ_I2C,
+		.end	= MV64x60_IRQ_I2C,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device i2c_device = {
+	.name		= MV64XXX_I2C_CTLR_NAME,
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(mv64xxx_i2c_resources),
+	.resource	= mv64xxx_i2c_resources,
+	.dev = {
+		.platform_data = &mv64xxx_i2c_pdata,
+	},
+};
+#endif
+
+static struct platform_device *mv64x60_pd_devs[] __initdata = {
+#ifdef CONFIG_SERIAL_MPSC
+	&mpsc_shared_device,
+	&mpsc0_device,
+	&mpsc1_device,
+#endif
+#ifdef CONFIG_MV643XX_ETH
+	&mv64x60_eth_shared_device,
+#endif
+#ifdef CONFIG_MV643XX_ETH_0
+	&eth0_device,
+#endif
+#ifdef CONFIG_MV643XX_ETH_1
+	&eth1_device,
+#endif
+#ifdef CONFIG_MV643XX_ETH_2
+	&eth2_device,
+#endif
+#ifdef	CONFIG_I2C_MV64XXX
+	&i2c_device,
+#endif
+};
+
+/*
+ *****************************************************************************
+ *
+ *	Bridge Initialization Routines
+ *
+ *****************************************************************************
+ */
+/*
+ * mv64x60_init()
+ *
+ * Initialze the bridge based on setting passed in via 'si'.  The bridge
+ * handle, 'bh', will be set so that it can be used to make subsequent
+ * calls to routines in this file.
+ */
+int __init
+mv64x60_init(struct mv64x60_handle *bh, struct mv64x60_setup_info *si)
+{
+	u32	mem_windows[MV64x60_CPU2MEM_WINDOWS][2];
+
+	if (ppc_md.progress)
+		ppc_md.progress("mv64x60 initialization", 0x0);
+
+	spin_lock_init(&mv64x60_lock);
+	mv64x60_early_init(bh, si);
+
+	if (mv64x60_get_type(bh) || mv64x60_setup_for_chip(bh)) {
+		iounmap(bh->v_base);
+		bh->v_base = 0;
+		if (ppc_md.progress)
+			ppc_md.progress("mv64x60_init: Can't determine chip",0);
+		return -1;
+	}
+
+	bh->ci->disable_all_windows(bh, si);
+	mv64x60_get_mem_windows(bh, mem_windows);
+	mv64x60_config_cpu2mem_windows(bh, si, mem_windows);
+
+	if (bh->ci->config_io2mem_windows)
+		bh->ci->config_io2mem_windows(bh, si, mem_windows);
+	if (bh->ci->set_mpsc2regs_window)
+		bh->ci->set_mpsc2regs_window(bh, si->phys_reg_base);
+
+	if (si->pci_1.enable_bus) {
+		bh->io_base_b = (u32)ioremap(si->pci_1.pci_io.cpu_base,
+			si->pci_1.pci_io.size);
+		isa_io_base = bh->io_base_b;
+	}
+
+	if (si->pci_0.enable_bus) {
+		bh->io_base_a = (u32)ioremap(si->pci_0.pci_io.cpu_base,
+			si->pci_0.pci_io.size);
+		isa_io_base = bh->io_base_a;
+
+		mv64x60_alloc_hose(bh, MV64x60_PCI0_CONFIG_ADDR,
+			MV64x60_PCI0_CONFIG_DATA, &bh->hose_a);
+		mv64x60_config_resources(bh->hose_a, &si->pci_0, bh->io_base_a);
+		mv64x60_config_pci_params(bh->hose_a, &si->pci_0);
+
+		mv64x60_config_cpu2pci_windows(bh, &si->pci_0, 0);
+		mv64x60_config_pci2mem_windows(bh, bh->hose_a, &si->pci_0, 0,
+			mem_windows);
+		bh->ci->set_pci2regs_window(bh, bh->hose_a, 0,
+			si->phys_reg_base);
+	}
+
+	if (si->pci_1.enable_bus) {
+		mv64x60_alloc_hose(bh, MV64x60_PCI1_CONFIG_ADDR,
+			MV64x60_PCI1_CONFIG_DATA, &bh->hose_b);
+		mv64x60_config_resources(bh->hose_b, &si->pci_1, bh->io_base_b);
+		mv64x60_config_pci_params(bh->hose_b, &si->pci_1);
+
+		mv64x60_config_cpu2pci_windows(bh, &si->pci_1, 1);
+		mv64x60_config_pci2mem_windows(bh, bh->hose_b, &si->pci_1, 1,
+			mem_windows);
+		bh->ci->set_pci2regs_window(bh, bh->hose_b, 1,
+			si->phys_reg_base);
+	}
+
+	bh->ci->chip_specific_init(bh, si);
+	mv64x60_pd_fixup(bh, mv64x60_pd_devs, ARRAY_SIZE(mv64x60_pd_devs));
+
+	return 0;
+}
+
+/*
+ * mv64x60_early_init()
+ *
+ * Do some bridge work that must take place before we start messing with
+ * the bridge for real.
+ */
+void __init
+mv64x60_early_init(struct mv64x60_handle *bh, struct mv64x60_setup_info *si)
+{
+	struct pci_controller	hose_a, hose_b;
+
+	memset(bh, 0, sizeof(*bh));
+
+	bh->p_base = si->phys_reg_base;
+	bh->v_base = ioremap(bh->p_base, MV64x60_INTERNAL_SPACE_SIZE);
+
+	mv64x60_bridge_pbase = bh->p_base;
+	mv64x60_bridge_vbase = bh->v_base;
+
+	/* Assuming pci mode [reserved] bits 4:5 on 64260 are 0 */
+	bh->pci_mode_a = mv64x60_read(bh, MV64x60_PCI0_MODE) &
+		MV64x60_PCIMODE_MASK;
+	bh->pci_mode_b = mv64x60_read(bh, MV64x60_PCI1_MODE) &
+		MV64x60_PCIMODE_MASK;
+
+	/* Need temporary hose structs to call mv64x60_set_bus() */
+	memset(&hose_a, 0, sizeof(hose_a));
+	memset(&hose_b, 0, sizeof(hose_b));
+	setup_indirect_pci_nomap(&hose_a, bh->v_base + MV64x60_PCI0_CONFIG_ADDR,
+		bh->v_base + MV64x60_PCI0_CONFIG_DATA);
+	setup_indirect_pci_nomap(&hose_b, bh->v_base + MV64x60_PCI1_CONFIG_ADDR,
+		bh->v_base + MV64x60_PCI1_CONFIG_DATA);
+	bh->hose_a = &hose_a;
+	bh->hose_b = &hose_b;
+
+	mv64x60_set_bus(bh, 0, 0);
+	mv64x60_set_bus(bh, 1, 0);
+
+	bh->hose_a = NULL;
+	bh->hose_b = NULL;
+
+	/* Clear bit 0 of PCI addr decode control so PCI->CPU remap 1:1 */
+	mv64x60_clr_bits(bh, MV64x60_PCI0_PCI_DECODE_CNTL, 0x00000001);
+	mv64x60_clr_bits(bh, MV64x60_PCI1_PCI_DECODE_CNTL, 0x00000001);
+
+	/* Bit 12 MUST be 0; set bit 27--don't auto-update cpu remap regs */
+	mv64x60_clr_bits(bh, MV64x60_CPU_CONFIG, (1<<12));
+	mv64x60_set_bits(bh, MV64x60_CPU_CONFIG, (1<<27));
+
+	mv64x60_set_bits(bh, MV64x60_PCI0_TO_RETRY, 0xffff);
+	mv64x60_set_bits(bh, MV64x60_PCI1_TO_RETRY, 0xffff);
+
+	return;
+}
+
+/*
+ *****************************************************************************
+ *
+ *	Window Config Routines
+ *
+ *****************************************************************************
+ */
+/*
+ * mv64x60_get_32bit_window()
+ *
+ * Determine the base address and size of a 32-bit window on the bridge.
+ */
+void __init
+mv64x60_get_32bit_window(struct mv64x60_handle *bh, u32 window,
+	u32 *base, u32 *size)
+{
+	u32	val, base_reg, size_reg, base_bits, size_bits;
+	u32	(*get_from_field)(u32 val, u32 num_bits);
+
+	base_reg = bh->ci->window_tab_32bit[window].base_reg;
+
+	if (base_reg != 0) {
+		size_reg  = bh->ci->window_tab_32bit[window].size_reg;
+		base_bits = bh->ci->window_tab_32bit[window].base_bits;
+		size_bits = bh->ci->window_tab_32bit[window].size_bits;
+		get_from_field= bh->ci->window_tab_32bit[window].get_from_field;
+
+		val = mv64x60_read(bh, base_reg);
+		*base = get_from_field(val, base_bits);
+
+		if (size_reg != 0) {
+			val = mv64x60_read(bh, size_reg);
+			val = get_from_field(val, size_bits);
+			*size = bh->ci->untranslate_size(*base, val, size_bits);
+		}
+		else
+			*size = 0;
+	}
+	else {
+		*base = 0;
+		*size = 0;
+	}
+
+	pr_debug("get 32bit window: %d, base: 0x%x, size: 0x%x\n",
+		window, *base, *size);
+
+	return;
+}
+
+/*
+ * mv64x60_set_32bit_window()
+ *
+ * Set the base address and size of a 32-bit window on the bridge.
+ */
+void __init
+mv64x60_set_32bit_window(struct mv64x60_handle *bh, u32 window,
+	u32 base, u32 size, u32 other_bits)
+{
+	u32	val, base_reg, size_reg, base_bits, size_bits;
+	u32	(*map_to_field)(u32 val, u32 num_bits);
+
+	pr_debug("set 32bit window: %d, base: 0x%x, size: 0x%x, other: 0x%x\n",
+		window, base, size, other_bits);
+
+	base_reg = bh->ci->window_tab_32bit[window].base_reg;
+
+	if (base_reg != 0) {
+		size_reg  = bh->ci->window_tab_32bit[window].size_reg;
+		base_bits = bh->ci->window_tab_32bit[window].base_bits;
+		size_bits = bh->ci->window_tab_32bit[window].size_bits;
+		map_to_field = bh->ci->window_tab_32bit[window].map_to_field;
+
+		val = map_to_field(base, base_bits) | other_bits;
+		mv64x60_write(bh, base_reg, val);
+
+		if (size_reg != 0) {
+			val = bh->ci->translate_size(base, size, size_bits);
+			val = map_to_field(val, size_bits);
+			mv64x60_write(bh, size_reg, val);
+		}
+
+		(void)mv64x60_read(bh, base_reg); /* Flush FIFO */
+	}
+
+	return;
+}
+
+/*
+ * mv64x60_get_64bit_window()
+ *
+ * Determine the base address and size of a 64-bit window on the bridge.
+ */
+void __init
+mv64x60_get_64bit_window(struct mv64x60_handle *bh, u32 window,
+	u32 *base_hi, u32 *base_lo, u32 *size)
+{
+	u32	val, base_lo_reg, size_reg, base_lo_bits, size_bits;
+	u32	(*get_from_field)(u32 val, u32 num_bits);
+
+	base_lo_reg = bh->ci->window_tab_64bit[window].base_lo_reg;
+
+	if (base_lo_reg != 0) {
+		size_reg = bh->ci->window_tab_64bit[window].size_reg;
+		base_lo_bits = bh->ci->window_tab_64bit[window].base_lo_bits;
+		size_bits = bh->ci->window_tab_64bit[window].size_bits;
+		get_from_field= bh->ci->window_tab_64bit[window].get_from_field;
+
+		*base_hi = mv64x60_read(bh,
+			bh->ci->window_tab_64bit[window].base_hi_reg);
+
+		val = mv64x60_read(bh, base_lo_reg);
+		*base_lo = get_from_field(val, base_lo_bits);
+
+		if (size_reg != 0) {
+			val = mv64x60_read(bh, size_reg);
+			val = get_from_field(val, size_bits);
+			*size = bh->ci->untranslate_size(*base_lo, val,
+								size_bits);
+		}
+		else
+			*size = 0;
+	}
+	else {
+		*base_hi = 0;
+		*base_lo = 0;
+		*size = 0;
+	}
+
+	pr_debug("get 64bit window: %d, base hi: 0x%x, base lo: 0x%x, "
+		"size: 0x%x\n", window, *base_hi, *base_lo, *size);
+
+	return;
+}
+
+/*
+ * mv64x60_set_64bit_window()
+ *
+ * Set the base address and size of a 64-bit window on the bridge.
+ */
+void __init
+mv64x60_set_64bit_window(struct mv64x60_handle *bh, u32 window,
+	u32 base_hi, u32 base_lo, u32 size, u32 other_bits)
+{
+	u32	val, base_lo_reg, size_reg, base_lo_bits, size_bits;
+	u32	(*map_to_field)(u32 val, u32 num_bits);
+
+	pr_debug("set 64bit window: %d, base hi: 0x%x, base lo: 0x%x, "
+		"size: 0x%x, other: 0x%x\n",
+		window, base_hi, base_lo, size, other_bits);
+
+	base_lo_reg = bh->ci->window_tab_64bit[window].base_lo_reg;
+
+	if (base_lo_reg != 0) {
+		size_reg = bh->ci->window_tab_64bit[window].size_reg;
+		base_lo_bits = bh->ci->window_tab_64bit[window].base_lo_bits;
+		size_bits = bh->ci->window_tab_64bit[window].size_bits;
+		map_to_field = bh->ci->window_tab_64bit[window].map_to_field;
+
+		mv64x60_write(bh, bh->ci->window_tab_64bit[window].base_hi_reg,
+			base_hi);
+
+		val = map_to_field(base_lo, base_lo_bits) | other_bits;
+		mv64x60_write(bh, base_lo_reg, val);
+
+		if (size_reg != 0) {
+			val = bh->ci->translate_size(base_lo, size, size_bits);
+			val = map_to_field(val, size_bits);
+			mv64x60_write(bh, size_reg, val);
+		}
+
+		(void)mv64x60_read(bh, base_lo_reg); /* Flush FIFO */
+	}
+
+	return;
+}
+
+/*
+ * mv64x60_mask()
+ *
+ * Take the high-order 'num_bits' of 'val' & mask off low bits.
+ */
+u32 __init
+mv64x60_mask(u32 val, u32 num_bits)
+{
+	return val & (0xffffffff << (32 - num_bits));
+}
+
+/*
+ * mv64x60_shift_left()
+ *
+ * Take the low-order 'num_bits' of 'val', shift left to align at bit 31 (MSB).
+ */
+u32 __init
+mv64x60_shift_left(u32 val, u32 num_bits)
+{
+	return val << (32 - num_bits);
+}
+
+/*
+ * mv64x60_shift_right()
+ *
+ * Take the high-order 'num_bits' of 'val', shift right to align at bit 0 (LSB).
+ */
+u32 __init
+mv64x60_shift_right(u32 val, u32 num_bits)
+{
+	return val >> (32 - num_bits);
+}
+
+/*
+ *****************************************************************************
+ *
+ *	Chip Identification Routines
+ *
+ *****************************************************************************
+ */
+/*
+ * mv64x60_get_type()
+ *
+ * Determine the type of bridge chip we have.
+ */
+int __init
+mv64x60_get_type(struct mv64x60_handle *bh)
+{
+	struct pci_controller hose;
+	u16	val;
+	u8	save_exclude;
+
+	memset(&hose, 0, sizeof(hose));
+	setup_indirect_pci_nomap(&hose, bh->v_base + MV64x60_PCI0_CONFIG_ADDR,
+		bh->v_base + MV64x60_PCI0_CONFIG_DATA);
+
+	save_exclude = mv64x60_pci_exclude_bridge;
+	mv64x60_pci_exclude_bridge = 0;
+	/* Sanity check of bridge's Vendor ID */
+	early_read_config_word(&hose, 0, PCI_DEVFN(0, 0), PCI_VENDOR_ID, &val);
+
+	if (val != PCI_VENDOR_ID_MARVELL) {
+		mv64x60_pci_exclude_bridge = save_exclude;
+		return -1;
+	}
+
+	/* Get the revision of the chip */
+	early_read_config_word(&hose, 0, PCI_DEVFN(0, 0), PCI_CLASS_REVISION,
+		&val);
+	bh->rev = (u32)(val & 0xff);
+
+	/* Figure out the type of Marvell bridge it is */
+	early_read_config_word(&hose, 0, PCI_DEVFN(0, 0), PCI_DEVICE_ID, &val);
+	mv64x60_pci_exclude_bridge = save_exclude;
+
+	switch (val) {
+	case PCI_DEVICE_ID_MARVELL_GT64260:
+		switch (bh->rev) {
+		case GT64260_REV_A:
+			bh->type = MV64x60_TYPE_GT64260A;
+			break;
+
+		default:
+			printk(KERN_WARNING "Unsupported GT64260 rev %04x\n",
+				bh->rev);
+			/* Assume its similar to a 'B' rev and fallthru */
+		case GT64260_REV_B:
+			bh->type = MV64x60_TYPE_GT64260B;
+			break;
+		}
+		break;
+
+	case PCI_DEVICE_ID_MARVELL_MV64360:
+		/* Marvell won't tell me how to distinguish a 64361 & 64362 */
+		bh->type = MV64x60_TYPE_MV64360;
+		break;
+
+	case PCI_DEVICE_ID_MARVELL_MV64460:
+		bh->type = MV64x60_TYPE_MV64460;
+		break;
+
+	default:
+		printk(KERN_ERR "Unknown Marvell bridge type %04x\n", val);
+		return -1;
+	}
+
+	/* Hang onto bridge type & rev for PIC code */
+	mv64x60_bridge_type = bh->type;
+	mv64x60_bridge_rev = bh->rev;
+
+	return 0;
+}
+
+/*
+ * mv64x60_setup_for_chip()
+ *
+ * Set 'bh' to use the proper set of routine for the bridge chip that we have.
+ */
+int __init
+mv64x60_setup_for_chip(struct mv64x60_handle *bh)
+{
+	int	rc = 0;
+
+	/* Set up chip-specific info based on the chip/bridge type */
+	switch(bh->type) {
+	case MV64x60_TYPE_GT64260A:
+		bh->ci = &gt64260a_ci;
+		break;
+
+	case MV64x60_TYPE_GT64260B:
+		bh->ci = &gt64260b_ci;
+		break;
+
+	case MV64x60_TYPE_MV64360:
+		bh->ci = &mv64360_ci;
+		break;
+
+	case MV64x60_TYPE_MV64460:
+		bh->ci = &mv64460_ci;
+		break;
+
+	case MV64x60_TYPE_INVALID:
+	default:
+		if (ppc_md.progress)
+			ppc_md.progress("mv64x60: Unsupported bridge", 0x0);
+		printk(KERN_ERR "mv64x60: Unsupported bridge\n");
+		rc = -1;
+	}
+
+	return rc;
+}
+
+/*
+ * mv64x60_get_bridge_vbase()
+ *
+ * Return the virtual address of the bridge's registers.
+ */
+void *
+mv64x60_get_bridge_vbase(void)
+{
+	return mv64x60_bridge_vbase;
+}
+
+/*
+ * mv64x60_get_bridge_type()
+ *
+ * Return the type of bridge on the platform.
+ */
+u32
+mv64x60_get_bridge_type(void)
+{
+	return mv64x60_bridge_type;
+}
+
+/*
+ * mv64x60_get_bridge_rev()
+ *
+ * Return the revision of the bridge on the platform.
+ */
+u32
+mv64x60_get_bridge_rev(void)
+{
+	return mv64x60_bridge_rev;
+}
+
+/*
+ *****************************************************************************
+ *
+ *	System Memory Window Related Routines
+ *
+ *****************************************************************************
+ */
+/*
+ * mv64x60_get_mem_size()
+ *
+ * Calculate the amount of memory that the memory controller is set up for.
+ * This should only be used by board-specific code if there is no other
+ * way to determine the amount of memory in the system.
+ */
+u32 __init
+mv64x60_get_mem_size(u32 bridge_base, u32 chip_type)
+{
+	struct mv64x60_handle	bh;
+	u32	mem_windows[MV64x60_CPU2MEM_WINDOWS][2];
+	u32	rc = 0;
+
+	memset(&bh, 0, sizeof(bh));
+
+	bh.type = chip_type;
+	bh.v_base = (void *)bridge_base;
+
+	if (!mv64x60_setup_for_chip(&bh)) {
+		mv64x60_get_mem_windows(&bh, mem_windows);
+		rc = mv64x60_calc_mem_size(&bh, mem_windows);
+	}
+
+	return rc;
+}
+
+/*
+ * mv64x60_get_mem_windows()
+ *
+ * Get the values in the memory controller & return in the 'mem_windows' array.
+ */
+void __init
+mv64x60_get_mem_windows(struct mv64x60_handle *bh,
+	u32 mem_windows[MV64x60_CPU2MEM_WINDOWS][2])
+{
+	u32	i, win;
+
+	for (win=MV64x60_CPU2MEM_0_WIN,i=0;win<=MV64x60_CPU2MEM_3_WIN;win++,i++)
+		if (bh->ci->is_enabled_32bit(bh, win))
+			mv64x60_get_32bit_window(bh, win,
+				&mem_windows[i][0], &mem_windows[i][1]);
+		else {
+			mem_windows[i][0] = 0;
+			mem_windows[i][1] = 0;
+		}
+
+	return;
+}
+
+/*
+ * mv64x60_calc_mem_size()
+ *
+ * Using the memory controller register values in 'mem_windows', determine
+ * how much memory it is set up for.
+ */
+u32 __init
+mv64x60_calc_mem_size(struct mv64x60_handle *bh,
+	u32 mem_windows[MV64x60_CPU2MEM_WINDOWS][2])
+{
+	u32	i, total = 0;
+
+	for (i=0; i<MV64x60_CPU2MEM_WINDOWS; i++)
+		total += mem_windows[i][1];
+
+	return total;
+}
+
+/*
+ *****************************************************************************
+ *
+ *	CPU->System MEM, PCI Config Routines
+ *
+ *****************************************************************************
+ */
+/*
+ * mv64x60_config_cpu2mem_windows()
+ *
+ * Configure CPU->Memory windows on the bridge.
+ */
+static u32 prot_tab[] __initdata = {
+	MV64x60_CPU_PROT_0_WIN, MV64x60_CPU_PROT_1_WIN,
+	MV64x60_CPU_PROT_2_WIN, MV64x60_CPU_PROT_3_WIN
+};
+
+static u32 cpu_snoop_tab[] __initdata = {
+	MV64x60_CPU_SNOOP_0_WIN, MV64x60_CPU_SNOOP_1_WIN,
+	MV64x60_CPU_SNOOP_2_WIN, MV64x60_CPU_SNOOP_3_WIN
+};
+
+void __init
+mv64x60_config_cpu2mem_windows(struct mv64x60_handle *bh,
+	struct mv64x60_setup_info *si,
+	u32 mem_windows[MV64x60_CPU2MEM_WINDOWS][2])
+{
+	u32	i, win;
+
+	/* Set CPU protection & snoop windows */
+	for (win=MV64x60_CPU2MEM_0_WIN,i=0;win<=MV64x60_CPU2MEM_3_WIN;win++,i++)
+		if (bh->ci->is_enabled_32bit(bh, win)) {
+			mv64x60_set_32bit_window(bh, prot_tab[i],
+				mem_windows[i][0], mem_windows[i][1],
+				si->cpu_prot_options[i]);
+			bh->ci->enable_window_32bit(bh, prot_tab[i]);
+
+			if (bh->ci->window_tab_32bit[cpu_snoop_tab[i]].
+								base_reg != 0) {
+				mv64x60_set_32bit_window(bh, cpu_snoop_tab[i],
+					mem_windows[i][0], mem_windows[i][1],
+					si->cpu_snoop_options[i]);
+				bh->ci->enable_window_32bit(bh,
+					cpu_snoop_tab[i]);
+			}
+
+		}
+
+	return;
+}
+
+/*
+ * mv64x60_config_cpu2pci_windows()
+ *
+ * Configure the CPU->PCI windows for one of the PCI buses.
+ */
+static u32 win_tab[2][4] __initdata = {
+	{ MV64x60_CPU2PCI0_IO_WIN, MV64x60_CPU2PCI0_MEM_0_WIN,
+	  MV64x60_CPU2PCI0_MEM_1_WIN, MV64x60_CPU2PCI0_MEM_2_WIN },
+	{ MV64x60_CPU2PCI1_IO_WIN, MV64x60_CPU2PCI1_MEM_0_WIN,
+	  MV64x60_CPU2PCI1_MEM_1_WIN, MV64x60_CPU2PCI1_MEM_2_WIN },
+};
+
+static u32 remap_tab[2][4] __initdata = {
+	{ MV64x60_CPU2PCI0_IO_REMAP_WIN, MV64x60_CPU2PCI0_MEM_0_REMAP_WIN,
+	  MV64x60_CPU2PCI0_MEM_1_REMAP_WIN, MV64x60_CPU2PCI0_MEM_2_REMAP_WIN },
+	{ MV64x60_CPU2PCI1_IO_REMAP_WIN, MV64x60_CPU2PCI1_MEM_0_REMAP_WIN,
+	  MV64x60_CPU2PCI1_MEM_1_REMAP_WIN, MV64x60_CPU2PCI1_MEM_2_REMAP_WIN }
+};
+
+void __init
+mv64x60_config_cpu2pci_windows(struct mv64x60_handle *bh,
+	struct mv64x60_pci_info *pi, u32 bus)
+{
+	int	i;
+
+	if (pi->pci_io.size > 0) {
+		mv64x60_set_32bit_window(bh, win_tab[bus][0],
+			pi->pci_io.cpu_base, pi->pci_io.size, pi->pci_io.swap);
+		mv64x60_set_32bit_window(bh, remap_tab[bus][0],
+			pi->pci_io.pci_base_lo, 0, 0);
+		bh->ci->enable_window_32bit(bh, win_tab[bus][0]);
+	}
+	else /* Actually, the window should already be disabled */
+		bh->ci->disable_window_32bit(bh, win_tab[bus][0]);
+
+	for (i=0; i<3; i++)
+		if (pi->pci_mem[i].size > 0) {
+			mv64x60_set_32bit_window(bh, win_tab[bus][i+1],
+				pi->pci_mem[i].cpu_base, pi->pci_mem[i].size,
+				pi->pci_mem[i].swap);
+			mv64x60_set_64bit_window(bh, remap_tab[bus][i+1],
+				pi->pci_mem[i].pci_base_hi,
+				pi->pci_mem[i].pci_base_lo, 0, 0);
+			bh->ci->enable_window_32bit(bh, win_tab[bus][i+1]);
+		}
+		else /* Actually, the window should already be disabled */
+			bh->ci->disable_window_32bit(bh, win_tab[bus][i+1]);
+
+	return;
+}
+
+/*
+ *****************************************************************************
+ *
+ *	PCI->System MEM Config Routines
+ *
+ *****************************************************************************
+ */
+/*
+ * mv64x60_config_pci2mem_windows()
+ *
+ * Configure the PCI->Memory windows on the bridge.
+ */
+static u32 pci_acc_tab[2][4] __initdata = {
+	{ MV64x60_PCI02MEM_ACC_CNTL_0_WIN, MV64x60_PCI02MEM_ACC_CNTL_1_WIN,
+	  MV64x60_PCI02MEM_ACC_CNTL_2_WIN, MV64x60_PCI02MEM_ACC_CNTL_3_WIN },
+	{ MV64x60_PCI12MEM_ACC_CNTL_0_WIN, MV64x60_PCI12MEM_ACC_CNTL_1_WIN,
+	  MV64x60_PCI12MEM_ACC_CNTL_2_WIN, MV64x60_PCI12MEM_ACC_CNTL_3_WIN }
+};
+
+static u32 pci_snoop_tab[2][4] __initdata = {
+	{ MV64x60_PCI02MEM_SNOOP_0_WIN, MV64x60_PCI02MEM_SNOOP_1_WIN,
+	  MV64x60_PCI02MEM_SNOOP_2_WIN, MV64x60_PCI02MEM_SNOOP_3_WIN },
+	{ MV64x60_PCI12MEM_SNOOP_0_WIN, MV64x60_PCI12MEM_SNOOP_1_WIN,
+	  MV64x60_PCI12MEM_SNOOP_2_WIN, MV64x60_PCI12MEM_SNOOP_3_WIN }
+};
+
+static u32 pci_size_tab[2][4] __initdata = {
+	{ MV64x60_PCI0_MEM_0_SIZE, MV64x60_PCI0_MEM_1_SIZE,
+	  MV64x60_PCI0_MEM_2_SIZE, MV64x60_PCI0_MEM_3_SIZE },
+	{ MV64x60_PCI1_MEM_0_SIZE, MV64x60_PCI1_MEM_1_SIZE,
+	  MV64x60_PCI1_MEM_2_SIZE, MV64x60_PCI1_MEM_3_SIZE }
+};
+
+void __init
+mv64x60_config_pci2mem_windows(struct mv64x60_handle *bh,
+	struct pci_controller *hose, struct mv64x60_pci_info *pi,
+	u32 bus, u32 mem_windows[MV64x60_CPU2MEM_WINDOWS][2])
+{
+	u32	i, win;
+
+	/*
+	 * Set the access control, snoop, BAR size, and window base addresses.
+	 * PCI->MEM windows base addresses will match exactly what the
+	 * CPU->MEM windows are.
+	 */
+	for (win=MV64x60_CPU2MEM_0_WIN,i=0;win<=MV64x60_CPU2MEM_3_WIN;win++,i++)
+		if (bh->ci->is_enabled_32bit(bh, win)) {
+			mv64x60_set_64bit_window(bh,
+				pci_acc_tab[bus][i], 0,
+				mem_windows[i][0], mem_windows[i][1],
+				pi->acc_cntl_options[i]);
+			bh->ci->enable_window_64bit(bh, pci_acc_tab[bus][i]);
+
+			if (bh->ci->window_tab_64bit[
+				pci_snoop_tab[bus][i]].base_lo_reg != 0) {
+
+				mv64x60_set_64bit_window(bh,
+					pci_snoop_tab[bus][i], 0,
+					mem_windows[i][0], mem_windows[i][1],
+					pi->snoop_options[i]);
+				bh->ci->enable_window_64bit(bh,
+					pci_snoop_tab[bus][i]);
+			}
+
+			bh->ci->set_pci2mem_window(hose, bus, i,
+				mem_windows[i][0]);
+			mv64x60_write(bh, pci_size_tab[bus][i],
+				mv64x60_mask(mem_windows[i][1] - 1, 20));
+
+			/* Enable the window */
+			mv64x60_clr_bits(bh, ((bus == 0) ?
+				MV64x60_PCI0_BAR_ENABLE :
+				MV64x60_PCI1_BAR_ENABLE), (1 << i));
+		}
+
+	return;
+}
+
+/*
+ *****************************************************************************
+ *
+ *	Hose & Resource Alloc/Init Routines
+ *
+ *****************************************************************************
+ */
+/*
+ * mv64x60_alloc_hoses()
+ *
+ * Allocate the PCI hose structures for the bridge's PCI buses.
+ */
+void __init
+mv64x60_alloc_hose(struct mv64x60_handle *bh, u32 cfg_addr, u32 cfg_data,
+	struct pci_controller **hose)
+{
+	*hose = pcibios_alloc_controller();
+	setup_indirect_pci_nomap(*hose, bh->v_base + cfg_addr,
+		bh->v_base + cfg_data);
+	return;
+}
+
+/*
+ * mv64x60_config_resources()
+ *
+ * Calculate the offsets, etc. for the hose structures to reflect all of
+ * the address remapping that happens as you go from CPU->PCI and PCI->MEM.
+ */
+void __init
+mv64x60_config_resources(struct pci_controller *hose,
+	struct mv64x60_pci_info *pi, u32 io_base)
+{
+	int		i;
+	/* 2 hoses; 4 resources/hose; string <= 64 bytes */
+	static char	s[2][4][64];
+
+	if (pi->pci_io.size != 0) {
+		sprintf(s[hose->index][0], "PCI hose %d I/O Space",
+			hose->index);
+		pci_init_resource(&hose->io_resource, io_base - isa_io_base,
+			io_base - isa_io_base + pi->pci_io.size - 1,
+			IORESOURCE_IO, s[hose->index][0]);
+		hose->io_space.start = pi->pci_io.pci_base_lo;
+		hose->io_space.end = pi->pci_io.pci_base_lo + pi->pci_io.size-1;
+		hose->io_base_phys = pi->pci_io.cpu_base;
+		hose->io_base_virt = (void *)isa_io_base;
+	}
+
+	for (i=0; i<3; i++)
+		if (pi->pci_mem[i].size != 0) {
+			sprintf(s[hose->index][i+1], "PCI hose %d MEM Space %d",
+				hose->index, i);
+			pci_init_resource(&hose->mem_resources[i],
+				pi->pci_mem[i].cpu_base,
+				pi->pci_mem[i].cpu_base + pi->pci_mem[i].size-1,
+				IORESOURCE_MEM, s[hose->index][i+1]);
+		}
+
+	hose->mem_space.end = pi->pci_mem[0].pci_base_lo +
+						pi->pci_mem[0].size - 1;
+	hose->pci_mem_offset = pi->pci_mem[0].cpu_base -
+						pi->pci_mem[0].pci_base_lo;
+	return;
+}
+
+/*
+ * mv64x60_config_pci_params()
+ *
+ * Configure a hose's PCI config space parameters.
+ */
+void __init
+mv64x60_config_pci_params(struct pci_controller *hose,
+	struct mv64x60_pci_info *pi)
+{
+	u32	devfn;
+	u16	u16_val;
+	u8	save_exclude;
+
+	devfn = PCI_DEVFN(0,0);
+
+	save_exclude = mv64x60_pci_exclude_bridge;
+	mv64x60_pci_exclude_bridge = 0;
+
+	/* Set class code to indicate host bridge */
+	u16_val = PCI_CLASS_BRIDGE_HOST; /* 0x0600 (host bridge) */
+	early_write_config_word(hose, 0, devfn, PCI_CLASS_DEVICE, u16_val);
+
+	/* Enable bridge to be PCI master & respond to PCI MEM cycles */
+	early_read_config_word(hose, 0, devfn, PCI_COMMAND, &u16_val);
+	u16_val &= ~(PCI_COMMAND_IO | PCI_COMMAND_INVALIDATE |
+		PCI_COMMAND_PARITY | PCI_COMMAND_SERR | PCI_COMMAND_FAST_BACK);
+	u16_val |= pi->pci_cmd_bits | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
+	early_write_config_word(hose, 0, devfn, PCI_COMMAND, u16_val);
+
+	/* Set latency timer, cache line size, clear BIST */
+	u16_val = (pi->latency_timer << 8) | (L1_CACHE_LINE_SIZE >> 2);
+	early_write_config_word(hose, 0, devfn, PCI_CACHE_LINE_SIZE, u16_val);
+
+	mv64x60_pci_exclude_bridge = save_exclude;
+	return;
+}
+
+/*
+ *****************************************************************************
+ *
+ *	PCI Related Routine
+ *
+ *****************************************************************************
+ */
+/*
+ * mv64x60_set_bus()
+ *
+ * Set the bus number for the hose directly under the bridge.
+ */
+void __init
+mv64x60_set_bus(struct mv64x60_handle *bh, u32 bus, u32 child_bus)
+{
+	struct pci_controller	*hose;
+	u32	pci_mode, p2p_cfg, pci_cfg_offset, val;
+	u8	save_exclude;
+
+	if (bus == 0) {
+		pci_mode = bh->pci_mode_a;
+		p2p_cfg = MV64x60_PCI0_P2P_CONFIG;
+		pci_cfg_offset = 0x64;
+		hose = bh->hose_a;
+	}
+	else {
+		pci_mode = bh->pci_mode_b;
+		p2p_cfg = MV64x60_PCI1_P2P_CONFIG;
+		pci_cfg_offset = 0xe4;
+		hose = bh->hose_b;
+	}
+
+	child_bus &= 0xff;
+	val = mv64x60_read(bh, p2p_cfg);
+
+	if (pci_mode == MV64x60_PCIMODE_CONVENTIONAL) {
+		val &= 0xe0000000; /* Force dev num to 0, turn off P2P bridge */
+		val |= (child_bus << 16) | 0xff;
+		mv64x60_write(bh, p2p_cfg, val);
+		(void)mv64x60_read(bh, p2p_cfg); /* Flush FIFO */
+	}
+	else { /* PCI-X */
+		/*
+		 * Need to use the current bus/dev number (that's in the
+		 * P2P CONFIG reg) to access the bridge's pci config space.
+		 */
+		save_exclude = mv64x60_pci_exclude_bridge;
+		mv64x60_pci_exclude_bridge = 0;
+		early_write_config_dword(hose, (val & 0x00ff0000) >> 16,
+			PCI_DEVFN(((val & 0x1f000000) >> 24), 0),
+			pci_cfg_offset, child_bus << 8);
+		mv64x60_pci_exclude_bridge = save_exclude;
+	}
+
+	return;
+}
+
+/*
+ * mv64x60_pci_exclude_device()
+ *
+ * This routine is used to make the bridge not appear when the
+ * PCI subsystem is accessing PCI devices (in PCI config space).
+ */
+int
+mv64x60_pci_exclude_device(u8 bus, u8 devfn)
+{
+	struct pci_controller	*hose;
+
+	hose = pci_bus_to_hose(bus);
+
+	/* Skip slot 0 on both hoses */
+	if ((mv64x60_pci_exclude_bridge == 1) && (PCI_SLOT(devfn) == 0) &&
+		(hose->first_busno == bus))
+
+		return PCIBIOS_DEVICE_NOT_FOUND;
+	else
+		return PCIBIOS_SUCCESSFUL;
+} /* mv64x60_pci_exclude_device() */
+
+/*
+ *****************************************************************************
+ *
+ *	Platform Device Routines
+ *
+ *****************************************************************************
+ */
+
+/*
+ * mv64x60_pd_fixup()
+ *
+ * Need to add the base addr of where the bridge's regs are mapped in the
+ * physical addr space so drivers can ioremap() them.
+ */
+void __init
+mv64x60_pd_fixup(struct mv64x60_handle *bh, struct platform_device *pd_devs[],
+	u32 entries)
+{
+	struct resource	*r;
+	u32		i, j;
+
+	for (i=0; i<entries; i++) {
+		j = 0;
+
+		while ((r = platform_get_resource(pd_devs[i],IORESOURCE_MEM,j))
+			!= NULL) {
+
+			r->start += bh->p_base;
+			r->end += bh->p_base;
+			j++;
+		}
+	}
+
+	return;
+}
+
+/*
+ * mv64x60_add_pds()
+ *
+ * Add the mv64x60 platform devices to the list of platform devices.
+ */
+static int __init
+mv64x60_add_pds(void)
+{
+	return platform_add_devices(mv64x60_pd_devs,
+		ARRAY_SIZE(mv64x60_pd_devs));
+}
+arch_initcall(mv64x60_add_pds);
+
+/*
+ *****************************************************************************
+ *
+ *	GT64260-Specific Routines
+ *
+ *****************************************************************************
+ */
+/*
+ * gt64260_translate_size()
+ *
+ * On the GT64260, the size register is really the "top" address of the window.
+ */
+static u32 __init
+gt64260_translate_size(u32 base, u32 size, u32 num_bits)
+{
+	return base + mv64x60_mask(size - 1, num_bits);
+}
+
+/*
+ * gt64260_untranslate_size()
+ *
+ * Translate the top address of a window into a window size.
+ */
+static u32 __init
+gt64260_untranslate_size(u32 base, u32 size, u32 num_bits)
+{
+	if (size >= base)
+		size = size - base + (1 << (32 - num_bits));
+	else
+		size = 0;
+
+	return size;
+}
+
+/*
+ * gt64260_set_pci2mem_window()
+ *
+ * The PCI->MEM window registers are actually in PCI config space so need
+ * to set them by setting the correct config space BARs.
+ */
+static u32 gt64260_reg_addrs[2][4] __initdata = {
+	{ 0x10, 0x14, 0x18, 0x1c }, { 0x90, 0x94, 0x98, 0x9c }
+};
+
+static void __init
+gt64260_set_pci2mem_window(struct pci_controller *hose, u32 bus, u32 window,
+	u32 base)
+{
+	u8	save_exclude;
+
+	pr_debug("set pci->mem window: %d, hose: %d, base: 0x%x\n", window,
+		hose->index, base);
+
+	save_exclude = mv64x60_pci_exclude_bridge;
+	mv64x60_pci_exclude_bridge = 0;
+	early_write_config_dword(hose, 0, PCI_DEVFN(0, 0),
+		gt64260_reg_addrs[bus][window], mv64x60_mask(base, 20) | 0x8);
+	mv64x60_pci_exclude_bridge = save_exclude;
+
+	return;
+}
+
+/*
+ * gt64260_set_pci2regs_window()
+ *
+ * Set where the bridge's registers appear in PCI MEM space.
+ */
+static u32 gt64260_offset[2] __initdata = {0x20, 0xa0};
+
+static void __init
+gt64260_set_pci2regs_window(struct mv64x60_handle *bh,
+	struct pci_controller *hose, u32 bus, u32 base)
+{
+	u8	save_exclude;
+
+	pr_debug("set pci->internal regs hose: %d, base: 0x%x\n", hose->index,
+		base);
+
+	save_exclude = mv64x60_pci_exclude_bridge;
+	mv64x60_pci_exclude_bridge = 0;
+	early_write_config_dword(hose, 0, PCI_DEVFN(0,0), gt64260_offset[bus],
+		(base << 16));
+	mv64x60_pci_exclude_bridge = save_exclude;
+
+	return;
+}
+
+/*
+ * gt64260_is_enabled_32bit()
+ *
+ * On a GT64260, a window is enabled iff its top address is >= to its base
+ * address.
+ */
+static u32 __init
+gt64260_is_enabled_32bit(struct mv64x60_handle *bh, u32 window)
+{
+	u32	rc = 0;
+
+	if ((gt64260_32bit_windows[window].base_reg != 0) &&
+		(gt64260_32bit_windows[window].size_reg != 0) &&
+		((mv64x60_read(bh, gt64260_32bit_windows[window].size_reg) &
+			((1 << gt64260_32bit_windows[window].size_bits) - 1)) >=
+		 (mv64x60_read(bh, gt64260_32bit_windows[window].base_reg) &
+			((1 << gt64260_32bit_windows[window].base_bits) - 1))))
+
+		rc = 1;
+
+	return rc;
+}
+
+/*
+ * gt64260_enable_window_32bit()
+ *
+ * On the GT64260, a window is enabled iff the top address is >= to the base
+ * address of the window.  Since the window has already been configured by
+ * the time this routine is called, we have nothing to do here.
+ */
+static void __init
+gt64260_enable_window_32bit(struct mv64x60_handle *bh, u32 window)
+{
+	pr_debug("enable 32bit window: %d\n", window);
+	return;
+}
+
+/*
+ * gt64260_disable_window_32bit()
+ *
+ * On a GT64260, you disable a window by setting its top address to be less
+ * than its base address.
+ */
+static void __init
+gt64260_disable_window_32bit(struct mv64x60_handle *bh, u32 window)
+{
+	pr_debug("disable 32bit window: %d, base_reg: 0x%x, size_reg: 0x%x\n",
+		window, gt64260_32bit_windows[window].base_reg,
+		gt64260_32bit_windows[window].size_reg);
+
+	if ((gt64260_32bit_windows[window].base_reg != 0) &&
+		(gt64260_32bit_windows[window].size_reg != 0)) {
+
+		/* To disable, make bottom reg higher than top reg */
+		mv64x60_write(bh, gt64260_32bit_windows[window].base_reg,0xfff);
+		mv64x60_write(bh, gt64260_32bit_windows[window].size_reg, 0);
+	}
+
+	return;
+}
+
+/*
+ * gt64260_enable_window_64bit()
+ *
+ * On the GT64260, a window is enabled iff the top address is >= to the base
+ * address of the window.  Since the window has already been configured by
+ * the time this routine is called, we have nothing to do here.
+ */
+static void __init
+gt64260_enable_window_64bit(struct mv64x60_handle *bh, u32 window)
+{
+	pr_debug("enable 64bit window: %d\n", window);
+	return;	/* Enabled when window configured (i.e., when top >= base) */
+}
+
+/*
+ * gt64260_disable_window_64bit()
+ *
+ * On a GT64260, you disable a window by setting its top address to be less
+ * than its base address.
+ */
+static void __init
+gt64260_disable_window_64bit(struct mv64x60_handle *bh, u32 window)
+{
+	pr_debug("disable 64bit window: %d, base_reg: 0x%x, size_reg: 0x%x\n",
+		window, gt64260_64bit_windows[window].base_lo_reg,
+		gt64260_64bit_windows[window].size_reg);
+
+	if ((gt64260_64bit_windows[window].base_lo_reg != 0) &&
+		(gt64260_64bit_windows[window].size_reg != 0)) {
+
+		/* To disable, make bottom reg higher than top reg */
+		mv64x60_write(bh, gt64260_64bit_windows[window].base_lo_reg,
+									0xfff);
+		mv64x60_write(bh, gt64260_64bit_windows[window].base_hi_reg, 0);
+		mv64x60_write(bh, gt64260_64bit_windows[window].size_reg, 0);
+	}
+
+	return;
+}
+
+/*
+ * gt64260_disable_all_windows()
+ *
+ * The GT64260 has several windows that aren't represented in the table of
+ * windows at the top of this file.  This routine turns all of them off
+ * except for the memory controller windows, of course.
+ */
+static void __init
+gt64260_disable_all_windows(struct mv64x60_handle *bh,
+	struct mv64x60_setup_info *si)
+{
+	u32	i, preserve;
+
+	/* Disable 32bit windows (don't disable cpu->mem windows) */
+	for (i=MV64x60_CPU2DEV_0_WIN; i<MV64x60_32BIT_WIN_COUNT; i++) {
+		if (i < 32)
+			preserve = si->window_preserve_mask_32_lo & (1 << i);
+		else
+			preserve = si->window_preserve_mask_32_hi & (1<<(i-32));
+
+		if (!preserve)
+			gt64260_disable_window_32bit(bh, i);
+	}
+
+	/* Disable 64bit windows */
+	for (i=0; i<MV64x60_64BIT_WIN_COUNT; i++)
+		if (!(si->window_preserve_mask_64 & (1<<i)))
+			gt64260_disable_window_64bit(bh, i);
+
+	/* Turn off cpu protection windows not in gt64260_32bit_windows[] */
+	mv64x60_write(bh, GT64260_CPU_PROT_BASE_4, 0xfff);
+	mv64x60_write(bh, GT64260_CPU_PROT_SIZE_4, 0);
+	mv64x60_write(bh, GT64260_CPU_PROT_BASE_5, 0xfff);
+	mv64x60_write(bh, GT64260_CPU_PROT_SIZE_5, 0);
+	mv64x60_write(bh, GT64260_CPU_PROT_BASE_6, 0xfff);
+	mv64x60_write(bh, GT64260_CPU_PROT_SIZE_6, 0);
+	mv64x60_write(bh, GT64260_CPU_PROT_BASE_7, 0xfff);
+	mv64x60_write(bh, GT64260_CPU_PROT_SIZE_7, 0);
+
+	/* Turn off PCI->MEM access cntl wins not in gt64260_64bit_windows[] */
+	mv64x60_write(bh, MV64x60_PCI0_ACC_CNTL_4_BASE_LO, 0xfff);
+	mv64x60_write(bh, MV64x60_PCI0_ACC_CNTL_4_BASE_HI, 0);
+	mv64x60_write(bh, MV64x60_PCI0_ACC_CNTL_4_SIZE, 0);
+	mv64x60_write(bh, MV64x60_PCI0_ACC_CNTL_5_BASE_LO, 0xfff);
+	mv64x60_write(bh, MV64x60_PCI0_ACC_CNTL_5_BASE_HI, 0);
+	mv64x60_write(bh, MV64x60_PCI0_ACC_CNTL_5_SIZE, 0);
+	mv64x60_write(bh, GT64260_PCI0_ACC_CNTL_6_BASE_LO, 0xfff);
+	mv64x60_write(bh, GT64260_PCI0_ACC_CNTL_6_BASE_HI, 0);
+	mv64x60_write(bh, GT64260_PCI0_ACC_CNTL_6_SIZE, 0);
+	mv64x60_write(bh, GT64260_PCI0_ACC_CNTL_7_BASE_LO, 0xfff);
+	mv64x60_write(bh, GT64260_PCI0_ACC_CNTL_7_BASE_HI, 0);
+	mv64x60_write(bh, GT64260_PCI0_ACC_CNTL_7_SIZE, 0);
+
+	mv64x60_write(bh, MV64x60_PCI1_ACC_CNTL_4_BASE_LO, 0xfff);
+	mv64x60_write(bh, MV64x60_PCI1_ACC_CNTL_4_BASE_HI, 0);
+	mv64x60_write(bh, MV64x60_PCI1_ACC_CNTL_4_SIZE, 0);
+	mv64x60_write(bh, MV64x60_PCI1_ACC_CNTL_5_BASE_LO, 0xfff);
+	mv64x60_write(bh, MV64x60_PCI1_ACC_CNTL_5_BASE_HI, 0);
+	mv64x60_write(bh, MV64x60_PCI1_ACC_CNTL_5_SIZE, 0);
+	mv64x60_write(bh, GT64260_PCI1_ACC_CNTL_6_BASE_LO, 0xfff);
+	mv64x60_write(bh, GT64260_PCI1_ACC_CNTL_6_BASE_HI, 0);
+	mv64x60_write(bh, GT64260_PCI1_ACC_CNTL_6_SIZE, 0);
+	mv64x60_write(bh, GT64260_PCI1_ACC_CNTL_7_BASE_LO, 0xfff);
+	mv64x60_write(bh, GT64260_PCI1_ACC_CNTL_7_BASE_HI, 0);
+	mv64x60_write(bh, GT64260_PCI1_ACC_CNTL_7_SIZE, 0);
+
+	/* Disable all PCI-><whatever> windows */
+	mv64x60_set_bits(bh, MV64x60_PCI0_BAR_ENABLE, 0x07fffdff);
+	mv64x60_set_bits(bh, MV64x60_PCI1_BAR_ENABLE, 0x07fffdff);
+
+	/*
+	 * Some firmwares enable a bunch of intr sources
+	 * for the PCI INT output pins.
+	 */
+	mv64x60_write(bh, GT64260_IC_CPU_INTR_MASK_LO, 0);
+	mv64x60_write(bh, GT64260_IC_CPU_INTR_MASK_HI, 0);
+	mv64x60_write(bh, GT64260_IC_PCI0_INTR_MASK_LO, 0);
+	mv64x60_write(bh, GT64260_IC_PCI0_INTR_MASK_HI, 0);
+	mv64x60_write(bh, GT64260_IC_PCI1_INTR_MASK_LO, 0);
+	mv64x60_write(bh, GT64260_IC_PCI1_INTR_MASK_HI, 0);
+	mv64x60_write(bh, GT64260_IC_CPU_INT_0_MASK, 0);
+	mv64x60_write(bh, GT64260_IC_CPU_INT_1_MASK, 0);
+	mv64x60_write(bh, GT64260_IC_CPU_INT_2_MASK, 0);
+	mv64x60_write(bh, GT64260_IC_CPU_INT_3_MASK, 0);
+
+	return;
+}
+
+/*
+ * gt64260a_chip_specific_init()
+ *
+ * Implement errata work arounds for the GT64260A.
+ */
+static void __init
+gt64260a_chip_specific_init(struct mv64x60_handle *bh,
+	struct mv64x60_setup_info *si)
+{
+#ifdef CONFIG_SERIAL_MPSC
+	struct resource	*r;
+#endif
+#if !defined(CONFIG_NOT_COHERENT_CACHE)
+	u32	val;
+	u8	save_exclude;
+#endif
+
+	if (si->pci_0.enable_bus)
+		mv64x60_set_bits(bh, MV64x60_PCI0_CMD,
+			((1<<4) | (1<<5) | (1<<9) | (1<<13)));
+
+	if (si->pci_1.enable_bus)
+		mv64x60_set_bits(bh, MV64x60_PCI1_CMD,
+			((1<<4) | (1<<5) | (1<<9) | (1<<13)));
+
+	/*
+	 * Dave Wilhardt found that bit 4 in the PCI Command registers must
+	 * be set if you are using cache coherency.
+	 */
+#if !defined(CONFIG_NOT_COHERENT_CACHE)
+	/* Res #MEM-4 -- cpu read buffer to buffer 1 */
+	if ((mv64x60_read(bh, MV64x60_CPU_MODE) & 0xf0) == 0x40)
+		mv64x60_set_bits(bh, GT64260_SDRAM_CONFIG, (1<<26));
+
+	save_exclude = mv64x60_pci_exclude_bridge;
+	mv64x60_pci_exclude_bridge = 0;
+	if (si->pci_0.enable_bus) {
+		early_read_config_dword(bh->hose_a, 0, PCI_DEVFN(0,0),
+			PCI_COMMAND, &val);
+		val |= PCI_COMMAND_INVALIDATE;
+		early_write_config_dword(bh->hose_a, 0, PCI_DEVFN(0,0),
+			PCI_COMMAND, val);
+	}
+
+	if (si->pci_1.enable_bus) {
+		early_read_config_dword(bh->hose_b, 0, PCI_DEVFN(0,0),
+			PCI_COMMAND, &val);
+		val |= PCI_COMMAND_INVALIDATE;
+		early_write_config_dword(bh->hose_b, 0, PCI_DEVFN(0,0),
+			PCI_COMMAND, val);
+	}
+	mv64x60_pci_exclude_bridge = save_exclude;
+#endif
+
+	/* Disable buffer/descriptor snooping */
+	mv64x60_clr_bits(bh, 0xf280, (1<< 6) | (1<<14) | (1<<22) | (1<<30));
+	mv64x60_clr_bits(bh, 0xf2c0, (1<< 6) | (1<<14) | (1<<22) | (1<<30));
+
+#ifdef CONFIG_SERIAL_MPSC
+	mv64x60_mpsc0_pdata.mirror_regs = 1;
+	mv64x60_mpsc0_pdata.cache_mgmt = 1;
+	mv64x60_mpsc1_pdata.mirror_regs = 1;
+	mv64x60_mpsc1_pdata.cache_mgmt = 1;
+
+	if ((r = platform_get_resource(&mpsc1_device, IORESOURCE_IRQ, 0))
+		!= NULL) {
+
+		r->start = MV64x60_IRQ_SDMA_0;
+		r->end = MV64x60_IRQ_SDMA_0;
+	}
+#endif
+
+	return;
+}
+
+/*
+ * gt64260b_chip_specific_init()
+ *
+ * Implement errata work arounds for the GT64260B.
+ */
+static void __init
+gt64260b_chip_specific_init(struct mv64x60_handle *bh,
+	struct mv64x60_setup_info *si)
+{
+#ifdef CONFIG_SERIAL_MPSC
+	struct resource	*r;
+#endif
+#if !defined(CONFIG_NOT_COHERENT_CACHE)
+	u32	val;
+	u8	save_exclude;
+#endif
+
+	if (si->pci_0.enable_bus)
+		mv64x60_set_bits(bh, MV64x60_PCI0_CMD,
+			((1<<4) | (1<<5) | (1<<9) | (1<<13)));
+
+	if (si->pci_1.enable_bus)
+		mv64x60_set_bits(bh, MV64x60_PCI1_CMD,
+			((1<<4) | (1<<5) | (1<<9) | (1<<13)));
+
+	/*
+	 * Dave Wilhardt found that bit 4 in the PCI Command registers must
+	 * be set if you are using cache coherency.
+	 */
+#if !defined(CONFIG_NOT_COHERENT_CACHE)
+	mv64x60_set_bits(bh, GT64260_CPU_WB_PRIORITY_BUFFER_DEPTH, 0xf);
+
+	/* Res #MEM-4 -- cpu read buffer to buffer 1 */
+	if ((mv64x60_read(bh, MV64x60_CPU_MODE) & 0xf0) == 0x40)
+		mv64x60_set_bits(bh, GT64260_SDRAM_CONFIG, (1<<26));
+
+	save_exclude = mv64x60_pci_exclude_bridge;
+	mv64x60_pci_exclude_bridge = 0;
+	if (si->pci_0.enable_bus) {
+		early_read_config_dword(bh->hose_a, 0, PCI_DEVFN(0,0),
+			PCI_COMMAND, &val);
+		val |= PCI_COMMAND_INVALIDATE;
+		early_write_config_dword(bh->hose_a, 0, PCI_DEVFN(0,0),
+			PCI_COMMAND, val);
+	}
+
+	if (si->pci_1.enable_bus) {
+		early_read_config_dword(bh->hose_b, 0, PCI_DEVFN(0,0),
+			PCI_COMMAND, &val);
+		val |= PCI_COMMAND_INVALIDATE;
+		early_write_config_dword(bh->hose_b, 0, PCI_DEVFN(0,0),
+			PCI_COMMAND, val);
+	}
+	mv64x60_pci_exclude_bridge = save_exclude;
+#endif
+
+	/* Disable buffer/descriptor snooping */
+	mv64x60_clr_bits(bh, 0xf280, (1<< 6) | (1<<14) | (1<<22) | (1<<30));
+	mv64x60_clr_bits(bh, 0xf2c0, (1<< 6) | (1<<14) | (1<<22) | (1<<30));
+
+#ifdef CONFIG_SERIAL_MPSC
+	/*
+	 * The 64260B is not supposed to have the bug where the MPSC & ENET
+	 * can't access cache coherent regions.  However, testing has shown
+	 * that the MPSC, at least, still has this bug.
+	 */
+	mv64x60_mpsc0_pdata.cache_mgmt = 1;
+	mv64x60_mpsc1_pdata.cache_mgmt = 1;
+
+	if ((r = platform_get_resource(&mpsc1_device, IORESOURCE_IRQ, 0))
+		!= NULL) {
+
+		r->start = MV64x60_IRQ_SDMA_0;
+		r->end = MV64x60_IRQ_SDMA_0;
+	}
+#endif
+
+	return;
+}
+
+/*
+ *****************************************************************************
+ *
+ *	MV64360-Specific Routines
+ *
+ *****************************************************************************
+ */
+/*
+ * mv64360_translate_size()
+ *
+ * On the MV64360, the size register is set similar to the size you get
+ * from a pci config space BAR register.  That is, programmed from LSB to MSB
+ * as a sequence of 1's followed by a sequence of 0's. IOW, "size -1" with the
+ * assumption that the size is a power of 2.
+ */
+static u32 __init
+mv64360_translate_size(u32 base_addr, u32 size, u32 num_bits)
+{
+	return mv64x60_mask(size - 1, num_bits);
+}
+
+/*
+ * mv64360_untranslate_size()
+ *
+ * Translate the size register value of a window into a window size.
+ */
+static u32 __init
+mv64360_untranslate_size(u32 base_addr, u32 size, u32 num_bits)
+{
+	if (size > 0) {
+		size >>= (32 - num_bits);
+		size++;
+		size <<= (32 - num_bits);
+	}
+
+	return size;
+}
+
+/*
+ * mv64360_set_pci2mem_window()
+ *
+ * The PCI->MEM window registers are actually in PCI config space so need
+ * to set them by setting the correct config space BARs.
+ */
+struct {
+	u32	fcn;
+	u32	base_hi_bar;
+	u32	base_lo_bar;
+} static mv64360_reg_addrs[2][4] __initdata = {
+	{{ 0, 0x14, 0x10 }, { 0, 0x1c, 0x18 },
+	 { 1, 0x14, 0x10 }, { 1, 0x1c, 0x18 }},
+	{{ 0, 0x94, 0x90 }, { 0, 0x9c, 0x98 },
+	 { 1, 0x94, 0x90 }, { 1, 0x9c, 0x98 }}
+};
+
+static void __init
+mv64360_set_pci2mem_window(struct pci_controller *hose, u32 bus, u32 window,
+	u32 base)
+{
+	u8 save_exclude;
+
+	pr_debug("set pci->mem window: %d, hose: %d, base: 0x%x\n", window,
+		hose->index, base);
+
+	save_exclude = mv64x60_pci_exclude_bridge;
+	mv64x60_pci_exclude_bridge = 0;
+	early_write_config_dword(hose, 0,
+		PCI_DEVFN(0, mv64360_reg_addrs[bus][window].fcn),
+		mv64360_reg_addrs[bus][window].base_hi_bar, 0);
+	early_write_config_dword(hose, 0,
+		PCI_DEVFN(0, mv64360_reg_addrs[bus][window].fcn),
+		mv64360_reg_addrs[bus][window].base_lo_bar,
+		mv64x60_mask(base,20) | 0xc);
+	mv64x60_pci_exclude_bridge = save_exclude;
+
+	return;
+}
+
+/*
+ * mv64360_set_pci2regs_window()
+ *
+ * Set where the bridge's registers appear in PCI MEM space.
+ */
+static u32 mv64360_offset[2][2] __initdata = {{0x20, 0x24}, {0xa0, 0xa4}};
+
+static void __init
+mv64360_set_pci2regs_window(struct mv64x60_handle *bh,
+	struct pci_controller *hose, u32 bus, u32 base)
+{
+	u8	save_exclude;
+
+	pr_debug("set pci->internal regs hose: %d, base: 0x%x\n", hose->index,
+		base);
+
+	save_exclude = mv64x60_pci_exclude_bridge;
+	mv64x60_pci_exclude_bridge = 0;
+	early_write_config_dword(hose, 0, PCI_DEVFN(0,0),
+		mv64360_offset[bus][0], (base << 16));
+	early_write_config_dword(hose, 0, PCI_DEVFN(0,0),
+		mv64360_offset[bus][1], 0);
+	mv64x60_pci_exclude_bridge = save_exclude;
+
+	return;
+}
+
+/*
+ * mv64360_is_enabled_32bit()
+ *
+ * On a MV64360, a window is enabled by either clearing a bit in the
+ * CPU BAR Enable reg or setting a bit in the window's base reg.
+ * Note that this doesn't work for windows on the PCI slave side but we don't
+ * check those so its okay.
+ */
+static u32 __init
+mv64360_is_enabled_32bit(struct mv64x60_handle *bh, u32 window)
+{
+	u32	extra, rc = 0;
+
+	if (((mv64360_32bit_windows[window].base_reg != 0) &&
+		(mv64360_32bit_windows[window].size_reg != 0)) ||
+		(window == MV64x60_CPU2SRAM_WIN)) {
+
+		extra = mv64360_32bit_windows[window].extra;
+
+		switch (extra & MV64x60_EXTRA_MASK) {
+		case MV64x60_EXTRA_CPUWIN_ENAB:
+			rc = (mv64x60_read(bh, MV64360_CPU_BAR_ENABLE) &
+				(1 << (extra & 0x1f))) == 0;
+			break;
+
+		case MV64x60_EXTRA_CPUPROT_ENAB:
+			rc = (mv64x60_read(bh,
+				mv64360_32bit_windows[window].base_reg) &
+					(1 << (extra & 0x1f))) != 0;
+			break;
+
+		case MV64x60_EXTRA_ENET_ENAB:
+			rc = (mv64x60_read(bh, MV64360_ENET2MEM_BAR_ENABLE) &
+				(1 << (extra & 0x7))) == 0;
+			break;
+
+		case MV64x60_EXTRA_MPSC_ENAB:
+			rc = (mv64x60_read(bh, MV64360_MPSC2MEM_BAR_ENABLE) &
+				(1 << (extra & 0x3))) == 0;
+			break;
+
+		case MV64x60_EXTRA_IDMA_ENAB:
+			rc = (mv64x60_read(bh, MV64360_IDMA2MEM_BAR_ENABLE) &
+				(1 << (extra & 0x7))) == 0;
+			break;
+
+		default:
+			printk(KERN_ERR "mv64360_is_enabled: %s\n",
+				"32bit table corrupted");
+		}
+	}
+
+	return rc;
+}
+
+/*
+ * mv64360_enable_window_32bit()
+ *
+ * On a MV64360, a window is enabled by either clearing a bit in the
+ * CPU BAR Enable reg or setting a bit in the window's base reg.
+ */
+static void __init
+mv64360_enable_window_32bit(struct mv64x60_handle *bh, u32 window)
+{
+	u32	extra;
+
+	pr_debug("enable 32bit window: %d\n", window);
+
+	if (((mv64360_32bit_windows[window].base_reg != 0) &&
+		(mv64360_32bit_windows[window].size_reg != 0)) ||
+		(window == MV64x60_CPU2SRAM_WIN)) {
+
+		extra = mv64360_32bit_windows[window].extra;
+
+		switch (extra & MV64x60_EXTRA_MASK) {
+		case MV64x60_EXTRA_CPUWIN_ENAB:
+			mv64x60_clr_bits(bh, MV64360_CPU_BAR_ENABLE,
+				(1 << (extra & 0x1f)));
+			break;
+
+		case MV64x60_EXTRA_CPUPROT_ENAB:
+			mv64x60_set_bits(bh,
+				mv64360_32bit_windows[window].base_reg,
+				(1 << (extra & 0x1f)));
+			break;
+
+		case MV64x60_EXTRA_ENET_ENAB:
+			mv64x60_clr_bits(bh, MV64360_ENET2MEM_BAR_ENABLE,
+				(1 << (extra & 0x7)));
+			break;
+
+		case MV64x60_EXTRA_MPSC_ENAB:
+			mv64x60_clr_bits(bh, MV64360_MPSC2MEM_BAR_ENABLE,
+				(1 << (extra & 0x3)));
+			break;
+
+		case MV64x60_EXTRA_IDMA_ENAB:
+			mv64x60_clr_bits(bh, MV64360_IDMA2MEM_BAR_ENABLE,
+				(1 << (extra & 0x7)));
+			break;
+
+		default:
+			printk(KERN_ERR "mv64360_enable: %s\n",
+				"32bit table corrupted");
+		}
+	}
+
+	return;
+}
+
+/*
+ * mv64360_disable_window_32bit()
+ *
+ * On a MV64360, a window is disabled by either setting a bit in the
+ * CPU BAR Enable reg or clearing a bit in the window's base reg.
+ */
+static void __init
+mv64360_disable_window_32bit(struct mv64x60_handle *bh, u32 window)
+{
+	u32	extra;
+
+	pr_debug("disable 32bit window: %d, base_reg: 0x%x, size_reg: 0x%x\n",
+		window, mv64360_32bit_windows[window].base_reg,
+		mv64360_32bit_windows[window].size_reg);
+
+	if (((mv64360_32bit_windows[window].base_reg != 0) &&
+		(mv64360_32bit_windows[window].size_reg != 0)) ||
+		(window == MV64x60_CPU2SRAM_WIN)) {
+
+		extra = mv64360_32bit_windows[window].extra;
+
+		switch (extra & MV64x60_EXTRA_MASK) {
+		case MV64x60_EXTRA_CPUWIN_ENAB:
+			mv64x60_set_bits(bh, MV64360_CPU_BAR_ENABLE,
+				(1 << (extra & 0x1f)));
+			break;
+
+		case MV64x60_EXTRA_CPUPROT_ENAB:
+			mv64x60_clr_bits(bh,
+				mv64360_32bit_windows[window].base_reg,
+				(1 << (extra & 0x1f)));
+			break;
+
+		case MV64x60_EXTRA_ENET_ENAB:
+			mv64x60_set_bits(bh, MV64360_ENET2MEM_BAR_ENABLE,
+				(1 << (extra & 0x7)));
+			break;
+
+		case MV64x60_EXTRA_MPSC_ENAB:
+			mv64x60_set_bits(bh, MV64360_MPSC2MEM_BAR_ENABLE,
+				(1 << (extra & 0x3)));
+			break;
+
+		case MV64x60_EXTRA_IDMA_ENAB:
+			mv64x60_set_bits(bh, MV64360_IDMA2MEM_BAR_ENABLE,
+				(1 << (extra & 0x7)));
+			break;
+
+		default:
+			printk(KERN_ERR "mv64360_disable: %s\n",
+				"32bit table corrupted");
+		}
+	}
+
+	return;
+}
+
+/*
+ * mv64360_enable_window_64bit()
+ *
+ * On the MV64360, a 64-bit window is enabled by setting a bit in the window's
+ * base reg.
+ */
+static void __init
+mv64360_enable_window_64bit(struct mv64x60_handle *bh, u32 window)
+{
+	pr_debug("enable 64bit window: %d\n", window);
+
+	if ((mv64360_64bit_windows[window].base_lo_reg!= 0) &&
+		(mv64360_64bit_windows[window].size_reg != 0)) {
+
+		if ((mv64360_64bit_windows[window].extra & MV64x60_EXTRA_MASK)
+			== MV64x60_EXTRA_PCIACC_ENAB)
+
+			mv64x60_set_bits(bh,
+				mv64360_64bit_windows[window].base_lo_reg,
+				(1 << (mv64360_64bit_windows[window].extra &
+									0x1f)));
+		else
+			printk(KERN_ERR "mv64360_enable: %s\n",
+				"64bit table corrupted");
+	}
+
+	return;
+}
+
+/*
+ * mv64360_disable_window_64bit()
+ *
+ * On a MV64360, a 64-bit window is disabled by clearing a bit in the window's
+ * base reg.
+ */
+static void __init
+mv64360_disable_window_64bit(struct mv64x60_handle *bh, u32 window)
+{
+	pr_debug("disable 64bit window: %d, base_reg: 0x%x, size_reg: 0x%x\n",
+		window, mv64360_64bit_windows[window].base_lo_reg,
+		mv64360_64bit_windows[window].size_reg);
+
+	if ((mv64360_64bit_windows[window].base_lo_reg != 0) &&
+		(mv64360_64bit_windows[window].size_reg != 0)) {
+
+		if ((mv64360_64bit_windows[window].extra & MV64x60_EXTRA_MASK)
+			== MV64x60_EXTRA_PCIACC_ENAB)
+
+			mv64x60_clr_bits(bh,
+				mv64360_64bit_windows[window].base_lo_reg,
+				(1 << (mv64360_64bit_windows[window].extra &
+									0x1f)));
+		else
+			printk(KERN_ERR "mv64360_disable: %s\n",
+				"64bit table corrupted");
+	}
+
+	return;
+}
+
+/*
+ * mv64360_disable_all_windows()
+ *
+ * The MV64360 has a few windows that aren't represented in the table of
+ * windows at the top of this file.  This routine turns all of them off
+ * except for the memory controller windows, of course.
+ */
+static void __init
+mv64360_disable_all_windows(struct mv64x60_handle *bh,
+	struct mv64x60_setup_info *si)
+{
+	u32	preserve, i;
+
+	/* Disable 32bit windows (don't disable cpu->mem windows) */
+	for (i=MV64x60_CPU2DEV_0_WIN; i<MV64x60_32BIT_WIN_COUNT; i++) {
+		if (i < 32)
+			preserve = si->window_preserve_mask_32_lo & (1 << i);
+		else
+			preserve = si->window_preserve_mask_32_hi & (1<<(i-32));
+
+		if (!preserve)
+			mv64360_disable_window_32bit(bh, i);
+	}
+
+	/* Disable 64bit windows */
+	for (i=0; i<MV64x60_64BIT_WIN_COUNT; i++)
+		if (!(si->window_preserve_mask_64 & (1<<i)))
+			mv64360_disable_window_64bit(bh, i);
+
+	/* Turn off PCI->MEM access cntl wins not in mv64360_64bit_windows[] */
+	mv64x60_clr_bits(bh, MV64x60_PCI0_ACC_CNTL_4_BASE_LO, 0);
+	mv64x60_clr_bits(bh, MV64x60_PCI0_ACC_CNTL_5_BASE_LO, 0);
+	mv64x60_clr_bits(bh, MV64x60_PCI1_ACC_CNTL_4_BASE_LO, 0);
+	mv64x60_clr_bits(bh, MV64x60_PCI1_ACC_CNTL_5_BASE_LO, 0);
+
+	/* Disable all PCI-><whatever> windows */
+	mv64x60_set_bits(bh, MV64x60_PCI0_BAR_ENABLE, 0x0000f9ff);
+	mv64x60_set_bits(bh, MV64x60_PCI1_BAR_ENABLE, 0x0000f9ff);
+
+	return;
+}
+
+/*
+ * mv64360_config_io2mem_windows()
+ *
+ * ENET, MPSC, and IDMA ctlrs on the MV64[34]60 have separate windows that
+ * must be set up so that the respective ctlr can access system memory.
+ */
+static u32 enet_tab[MV64x60_CPU2MEM_WINDOWS] __initdata = {
+	MV64x60_ENET2MEM_0_WIN, MV64x60_ENET2MEM_1_WIN,
+	MV64x60_ENET2MEM_2_WIN, MV64x60_ENET2MEM_3_WIN,
+};
+
+static u32 mpsc_tab[MV64x60_CPU2MEM_WINDOWS] __initdata = {
+	MV64x60_MPSC2MEM_0_WIN, MV64x60_MPSC2MEM_1_WIN,
+	MV64x60_MPSC2MEM_2_WIN, MV64x60_MPSC2MEM_3_WIN,
+};
+
+static u32 idma_tab[MV64x60_CPU2MEM_WINDOWS] __initdata = {
+	MV64x60_IDMA2MEM_0_WIN, MV64x60_IDMA2MEM_1_WIN,
+	MV64x60_IDMA2MEM_2_WIN, MV64x60_IDMA2MEM_3_WIN,
+};
+
+static u32 dram_selects[MV64x60_CPU2MEM_WINDOWS] __initdata =
+	{ 0xe, 0xd, 0xb, 0x7 };
+
+static void __init
+mv64360_config_io2mem_windows(struct mv64x60_handle *bh,
+	struct mv64x60_setup_info *si,
+	u32 mem_windows[MV64x60_CPU2MEM_WINDOWS][2])
+{
+	u32	i, win;
+
+	pr_debug("config_io2regs_windows: enet, mpsc, idma -> bridge regs\n");
+
+	mv64x60_write(bh, MV64360_ENET2MEM_ACC_PROT_0, 0);
+	mv64x60_write(bh, MV64360_ENET2MEM_ACC_PROT_1, 0);
+	mv64x60_write(bh, MV64360_ENET2MEM_ACC_PROT_2, 0);
+
+	mv64x60_write(bh, MV64360_MPSC2MEM_ACC_PROT_0, 0);
+	mv64x60_write(bh, MV64360_MPSC2MEM_ACC_PROT_1, 0);
+
+	mv64x60_write(bh, MV64360_IDMA2MEM_ACC_PROT_0, 0);
+	mv64x60_write(bh, MV64360_IDMA2MEM_ACC_PROT_1, 0);
+	mv64x60_write(bh, MV64360_IDMA2MEM_ACC_PROT_2, 0);
+	mv64x60_write(bh, MV64360_IDMA2MEM_ACC_PROT_3, 0);
+
+	/* Assume that mem ctlr has no more windows than embedded I/O ctlr */
+	for (win=MV64x60_CPU2MEM_0_WIN,i=0;win<=MV64x60_CPU2MEM_3_WIN;win++,i++)
+		if (bh->ci->is_enabled_32bit(bh, win)) {
+			mv64x60_set_32bit_window(bh, enet_tab[i],
+				mem_windows[i][0], mem_windows[i][1],
+				(dram_selects[i] << 8) |
+				(si->enet_options[i] & 0x3000));
+			bh->ci->enable_window_32bit(bh, enet_tab[i]);
+
+			/* Give enet r/w access to memory region */
+			mv64x60_set_bits(bh, MV64360_ENET2MEM_ACC_PROT_0,
+				(0x3 << (i << 1)));
+			mv64x60_set_bits(bh, MV64360_ENET2MEM_ACC_PROT_1,
+				(0x3 << (i << 1)));
+			mv64x60_set_bits(bh, MV64360_ENET2MEM_ACC_PROT_2,
+				(0x3 << (i << 1)));
+
+			mv64x60_set_32bit_window(bh, mpsc_tab[i],
+				mem_windows[i][0], mem_windows[i][1],
+				(dram_selects[i] << 8) |
+				(si->mpsc_options[i] & 0x3000));
+			bh->ci->enable_window_32bit(bh, mpsc_tab[i]);
+
+			/* Give mpsc r/w access to memory region */
+			mv64x60_set_bits(bh, MV64360_MPSC2MEM_ACC_PROT_0,
+				(0x3 << (i << 1)));
+			mv64x60_set_bits(bh, MV64360_MPSC2MEM_ACC_PROT_1,
+				(0x3 << (i << 1)));
+
+			mv64x60_set_32bit_window(bh, idma_tab[i],
+				mem_windows[i][0], mem_windows[i][1],
+				(dram_selects[i] << 8) |
+				(si->idma_options[i] & 0x3000));
+			bh->ci->enable_window_32bit(bh, idma_tab[i]);
+
+			/* Give idma r/w access to memory region */
+			mv64x60_set_bits(bh, MV64360_IDMA2MEM_ACC_PROT_0,
+				(0x3 << (i << 1)));
+			mv64x60_set_bits(bh, MV64360_IDMA2MEM_ACC_PROT_1,
+				(0x3 << (i << 1)));
+			mv64x60_set_bits(bh, MV64360_IDMA2MEM_ACC_PROT_2,
+				(0x3 << (i << 1)));
+			mv64x60_set_bits(bh, MV64360_IDMA2MEM_ACC_PROT_3,
+				(0x3 << (i << 1)));
+		}
+
+	return;
+}
+
+/*
+ * mv64360_set_mpsc2regs_window()
+ *
+ * MPSC has a window to the bridge's internal registers.  Call this routine
+ * to change that window so it doesn't conflict with the windows mapping the
+ * mpsc to system memory.
+ */
+static void __init
+mv64360_set_mpsc2regs_window(struct mv64x60_handle *bh, u32 base)
+{
+	pr_debug("set mpsc->internal regs, base: 0x%x\n", base);
+
+	mv64x60_write(bh, MV64360_MPSC2REGS_BASE, base & 0xffff0000);
+	return;
+}
+
+/*
+ * mv64360_chip_specific_init()
+ *
+ * No errata work arounds for the MV64360 implemented at this point.
+ */
+static void __init
+mv64360_chip_specific_init(struct mv64x60_handle *bh,
+	struct mv64x60_setup_info *si)
+{
+#ifdef CONFIG_SERIAL_MPSC
+	mv64x60_mpsc0_pdata.brg_can_tune = 1;
+	mv64x60_mpsc0_pdata.cache_mgmt = 1;
+	mv64x60_mpsc1_pdata.brg_can_tune = 1;
+	mv64x60_mpsc1_pdata.cache_mgmt = 1;
+#endif
+
+	return;
+}
+
+/*
+ * mv64460_chip_specific_init()
+ *
+ * No errata work arounds for the MV64460 implemented at this point.
+ */
+static void __init
+mv64460_chip_specific_init(struct mv64x60_handle *bh,
+	struct mv64x60_setup_info *si)
+{
+#ifdef CONFIG_SERIAL_MPSC
+	mv64x60_mpsc0_pdata.brg_can_tune = 1;
+	mv64x60_mpsc1_pdata.brg_can_tune = 1;
+#endif
+	return;
+}
diff --git a/arch/ppc/syslib/mv64x60_dbg.c b/arch/ppc/syslib/mv64x60_dbg.c
new file mode 100644
index 000000000000..2927c7adf5e5
--- /dev/null
+++ b/arch/ppc/syslib/mv64x60_dbg.c
@@ -0,0 +1,123 @@
+/*
+ * arch/ppc/syslib/mv64x60_dbg.c
+ *
+ * KGDB and progress routines for the Marvell/Galileo MV64x60 (Discovery).
+ *
+ * Author: Mark A. Greer <mgreer@mvista.com>
+ *
+ * 2003 (c) MontaVista Software, Inc.  This file is licensed under
+ * the terms of the GNU General Public License version 2.  This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+/*
+ *****************************************************************************
+ *
+ *	Low-level MPSC/UART I/O routines
+ *
+ *****************************************************************************
+ */
+
+
+#include <linux/config.h>
+#include <linux/irq.h>
+#include <asm/delay.h>
+#include <asm/mv64x60.h>
+
+
+#if defined(CONFIG_SERIAL_TEXT_DEBUG)
+
+#define	MPSC_CHR_1	0x000c
+#define	MPSC_CHR_2	0x0010
+
+static struct mv64x60_handle	mv64x60_dbg_bh;
+
+void
+mv64x60_progress_init(u32 base)
+{
+	mv64x60_dbg_bh.v_base = base;
+	return;
+}
+
+static void
+mv64x60_polled_putc(int chan, char c)
+{
+	u32	offset;
+
+	if (chan == 0)
+		offset = 0x8000;
+	else
+		offset = 0x9000;
+
+	mv64x60_write(&mv64x60_dbg_bh, offset + MPSC_CHR_1, (u32)c);
+	mv64x60_write(&mv64x60_dbg_bh, offset + MPSC_CHR_2, 0x200);
+	udelay(2000);
+}
+
+void
+mv64x60_mpsc_progress(char *s, unsigned short hex)
+{
+	volatile char	c;
+
+	mv64x60_polled_putc(0, '\r');
+
+	while ((c = *s++) != 0)
+		mv64x60_polled_putc(0, c);
+
+	mv64x60_polled_putc(0, '\n');
+	mv64x60_polled_putc(0, '\r');
+
+	return;
+}
+#endif	/* CONFIG_SERIAL_TEXT_DEBUG */
+
+
+#if defined(CONFIG_KGDB)
+
+#if defined(CONFIG_KGDB_TTYS0)
+#define KGDB_PORT 0
+#elif defined(CONFIG_KGDB_TTYS1)
+#define KGDB_PORT 1
+#else
+#error "Invalid kgdb_tty port"
+#endif
+
+void
+putDebugChar(unsigned char c)
+{
+	mv64x60_polled_putc(KGDB_PORT, (char)c);
+}
+
+int
+getDebugChar(void)
+{
+	unsigned char	c;
+
+	while (!mv64x60_polled_getc(KGDB_PORT, &c));
+	return (int)c;
+}
+
+void
+putDebugString(char* str)
+{
+	while (*str != '\0') {
+		putDebugChar(*str);
+		str++;
+	}
+	putDebugChar('\r');
+	return;
+}
+
+void
+kgdb_interruptible(int enable)
+{
+}
+
+void
+kgdb_map_scc(void)
+{
+	if (ppc_md.early_serial_map)
+		ppc_md.early_serial_map();
+}
+#endif	/* CONFIG_KGDB */
diff --git a/arch/ppc/syslib/mv64x60_win.c b/arch/ppc/syslib/mv64x60_win.c
new file mode 100644
index 000000000000..b6f0f5dcf6ee
--- /dev/null
+++ b/arch/ppc/syslib/mv64x60_win.c
@@ -0,0 +1,1168 @@
+/*
+ * arch/ppc/syslib/mv64x60_win.c
+ *
+ * Tables with info on how to manipulate the 32 & 64 bit windows on the
+ * various types of Marvell bridge chips.
+ *
+ * Author: Mark A. Greer <mgreer@mvista.com>
+ *
+ * 2004 (c) MontaVista, Software, Inc.  This file is licensed under
+ * the terms of the GNU General Public License version 2.  This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/bootmem.h>
+#include <linux/mv643xx.h>
+
+#include <asm/byteorder.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+#include <asm/machdep.h>
+#include <asm/pci-bridge.h>
+#include <asm/delay.h>
+#include <asm/mv64x60.h>
+
+
+/*
+ *****************************************************************************
+ *
+ *	Tables describing how to set up windows on each type of bridge
+ *
+ *****************************************************************************
+ */
+struct mv64x60_32bit_window
+	gt64260_32bit_windows[MV64x60_32BIT_WIN_COUNT] __initdata = {
+	/* CPU->MEM Windows */
+	[MV64x60_CPU2MEM_0_WIN] = {
+		.base_reg		= MV64x60_CPU2MEM_0_BASE,
+		.size_reg		= MV64x60_CPU2MEM_0_SIZE,
+		.base_bits		= 12,
+		.size_bits		= 12,
+		.get_from_field		= mv64x60_shift_left,
+		.map_to_field		= mv64x60_shift_right,
+		.extra			= 0 },
+	[MV64x60_CPU2MEM_1_WIN] = {
+		.base_reg		= MV64x60_CPU2MEM_1_BASE,
+		.size_reg		= MV64x60_CPU2MEM_1_SIZE,
+		.base_bits		= 12,
+		.size_bits		= 12,
+		.get_from_field		= mv64x60_shift_left,
+		.map_to_field		= mv64x60_shift_right,
+		.extra			= 0 },
+	[MV64x60_CPU2MEM_2_WIN] = {
+		.base_reg		= MV64x60_CPU2MEM_2_BASE,
+		.size_reg		= MV64x60_CPU2MEM_2_SIZE,
+		.base_bits		= 12,
+		.size_bits		= 12,
+		.get_from_field		= mv64x60_shift_left,
+		.map_to_field		= mv64x60_shift_right,
+		.extra			= 0 },
+	[MV64x60_CPU2MEM_3_WIN] = {
+		.base_reg		= MV64x60_CPU2MEM_3_BASE,
+		.size_reg		= MV64x60_CPU2MEM_3_SIZE,
+		.base_bits		= 12,
+		.size_bits		= 12,
+		.get_from_field		= mv64x60_shift_left,
+		.map_to_field		= mv64x60_shift_right,
+		.extra			= 0 },
+	/* CPU->Device Windows */
+	[MV64x60_CPU2DEV_0_WIN] = {
+		.base_reg		= MV64x60_CPU2DEV_0_BASE,
+		.size_reg		= MV64x60_CPU2DEV_0_SIZE,
+		.base_bits		= 12,
+		.size_bits		= 12,
+		.get_from_field		= mv64x60_shift_left,
+		.map_to_field		= mv64x60_shift_right,
+		.extra			= 0 },
+	[MV64x60_CPU2DEV_1_WIN] = {
+		.base_reg		= MV64x60_CPU2DEV_1_BASE,
+		.size_reg		= MV64x60_CPU2DEV_1_SIZE,
+		.base_bits		= 12,
+		.size_bits		= 12,
+		.get_from_field		= mv64x60_shift_left,
+		.map_to_field		= mv64x60_shift_right,
+		.extra			= 0 },
+	[MV64x60_CPU2DEV_2_WIN] = {
+		.base_reg		= MV64x60_CPU2DEV_2_BASE,
+		.size_reg		= MV64x60_CPU2DEV_2_SIZE,
+		.base_bits		= 12,
+		.size_bits		= 12,
+		.get_from_field		= mv64x60_shift_left,
+		.map_to_field		= mv64x60_shift_right,
+		.extra			= 0 },
+	[MV64x60_CPU2DEV_3_WIN] = {
+		.base_reg		= MV64x60_CPU2DEV_3_BASE,
+		.size_reg		= MV64x60_CPU2DEV_3_SIZE,
+		.base_bits		= 12,
+		.size_bits		= 12,
+		.get_from_field		= mv64x60_shift_left,
+		.map_to_field		= mv64x60_shift_right,
+		.extra			= 0 },
+	/* CPU->Boot Window */
+	[MV64x60_CPU2BOOT_WIN] = {
+		.base_reg		= MV64x60_CPU2BOOT_0_BASE,
+		.size_reg		= MV64x60_CPU2BOOT_0_SIZE,
+		.base_bits		= 12,
+		.size_bits		= 12,
+		.get_from_field		= mv64x60_shift_left,
+		.map_to_field		= mv64x60_shift_right,
+		.extra			= 0 },
+	/* CPU->PCI 0 Windows */
+	[MV64x60_CPU2PCI0_IO_WIN] = {
+		.base_reg		= MV64x60_CPU2PCI0_IO_BASE,
+		.size_reg		= MV64x60_CPU2PCI0_IO_SIZE,
+		.base_bits		= 12,
+		.size_bits		= 12,
+		.get_from_field		= mv64x60_shift_left,
+		.map_to_field		= mv64x60_shift_right,
+		.extra			= 0 },
+	[MV64x60_CPU2PCI0_MEM_0_WIN] = {
+		.base_reg		= MV64x60_CPU2PCI0_MEM_0_BASE,
+		.size_reg		= MV64x60_CPU2PCI0_MEM_0_SIZE,
+		.base_bits		= 12,
+		.size_bits		= 12,
+		.get_from_field		= mv64x60_shift_left,
+		.map_to_field		= mv64x60_shift_right,
+		.extra			= 0 },
+	[MV64x60_CPU2PCI0_MEM_1_WIN] = {
+		.base_reg		= MV64x60_CPU2PCI0_MEM_1_BASE,
+		.size_reg		= MV64x60_CPU2PCI0_MEM_1_SIZE,
+		.base_bits		= 12,
+		.size_bits		= 12,
+		.get_from_field		= mv64x60_shift_left,
+		.map_to_field		= mv64x60_shift_right,
+		.extra			= 0 },
+	[MV64x60_CPU2PCI0_MEM_2_WIN] = {
+		.base_reg		= MV64x60_CPU2PCI0_MEM_2_BASE,
+		.size_reg		= MV64x60_CPU2PCI0_MEM_2_SIZE,
+		.base_bits		= 12,
+		.size_bits		= 12,
+		.get_from_field		= mv64x60_shift_left,
+		.map_to_field		= mv64x60_shift_right,
+		.extra			= 0 },
+	[MV64x60_CPU2PCI0_MEM_3_WIN] = {
+		.base_reg		= MV64x60_CPU2PCI0_MEM_3_BASE,
+		.size_reg		= MV64x60_CPU2PCI0_MEM_3_SIZE,
+		.base_bits		= 12,
+		.size_bits		= 12,
+		.get_from_field		= mv64x60_shift_left,
+		.map_to_field		= mv64x60_shift_right,
+		.extra			= 0 },
+	/* CPU->PCI 1 Windows */
+	[MV64x60_CPU2PCI1_IO_WIN] = {
+		.base_reg		= MV64x60_CPU2PCI1_IO_BASE,
+		.size_reg		= MV64x60_CPU2PCI1_IO_SIZE,
+		.base_bits		= 12,
+		.size_bits		= 12,
+		.get_from_field		= mv64x60_shift_left,
+		.map_to_field		= mv64x60_shift_right,
+		.extra			= 0 },
+	[MV64x60_CPU2PCI1_MEM_0_WIN] = {
+		.base_reg		= MV64x60_CPU2PCI1_MEM_0_BASE,
+		.size_reg		= MV64x60_CPU2PCI1_MEM_0_SIZE,
+		.base_bits		= 12,
+		.size_bits		= 12,
+		.get_from_field		= mv64x60_shift_left,
+		.map_to_field		= mv64x60_shift_right,
+		.extra			= 0 },
+	[MV64x60_CPU2PCI1_MEM_1_WIN] = {
+		.base_reg		= MV64x60_CPU2PCI1_MEM_1_BASE,
+		.size_reg		= MV64x60_CPU2PCI1_MEM_1_SIZE,
+		.base_bits		= 12,
+		.size_bits		= 12,
+		.get_from_field		= mv64x60_shift_left,
+		.map_to_field		= mv64x60_shift_right,
+		.extra			= 0 },
+	[MV64x60_CPU2PCI1_MEM_2_WIN] = {
+		.base_reg		= MV64x60_CPU2PCI1_MEM_2_BASE,
+		.size_reg		= MV64x60_CPU2PCI1_MEM_2_SIZE,
+		.base_bits		= 12,
+		.size_bits		= 12,
+		.get_from_field		= mv64x60_shift_left,
+		.map_to_field		= mv64x60_shift_right,
+		.extra			= 0 },
+	[MV64x60_CPU2PCI1_MEM_3_WIN] = {
+		.base_reg		= MV64x60_CPU2PCI1_MEM_3_BASE,
+		.size_reg		= MV64x60_CPU2PCI1_MEM_3_SIZE,
+		.base_bits		= 12,
+		.size_bits		= 12,
+		.get_from_field		= mv64x60_shift_left,
+		.map_to_field		= mv64x60_shift_right,
+		.extra			= 0 },
+	/* CPU->SRAM Window (64260 has no integrated SRAM) */
+	/* CPU->PCI 0 Remap I/O Window */
+	[MV64x60_CPU2PCI0_IO_REMAP_WIN] = {
+		.base_reg		= MV64x60_CPU2PCI0_IO_REMAP,
+		.size_reg		= 0,
+		.base_bits		= 12,
+		.size_bits		= 0,
+		.get_from_field		= mv64x60_shift_left,
+		.map_to_field		= mv64x60_shift_right,
+		.extra			= 0 },
+	/* CPU->PCI 1 Remap I/O Window */
+	[MV64x60_CPU2PCI1_IO_REMAP_WIN] = {
+		.base_reg		= MV64x60_CPU2PCI1_IO_REMAP,
+		.size_reg		= 0,
+		.base_bits		= 12,
+		.size_bits		= 0,
+		.get_from_field		= mv64x60_shift_left,
+		.map_to_field		= mv64x60_shift_right,
+		.extra			= 0 },
+	/* CPU Memory Protection Windows */
+	[MV64x60_CPU_PROT_0_WIN] = {
+		.base_reg		= MV64x60_CPU_PROT_BASE_0,
+		.size_reg		= MV64x60_CPU_PROT_SIZE_0,
+		.base_bits		= 12,
+		.size_bits		= 12,
+		.get_from_field		= mv64x60_shift_left,
+		.map_to_field		= mv64x60_shift_right,
+		.extra			= 0 },
+	[MV64x60_CPU_PROT_1_WIN] = {
+		.base_reg		= MV64x60_CPU_PROT_BASE_1,
+		.size_reg		= MV64x60_CPU_PROT_SIZE_1,
+		.base_bits		= 12,
+		.size_bits		= 12,
+		.get_from_field		= mv64x60_shift_left,
+		.map_to_field		= mv64x60_shift_right,
+		.extra			= 0 },
+	[MV64x60_CPU_PROT_2_WIN] = {
+		.base_reg		= MV64x60_CPU_PROT_BASE_2,
+		.size_reg		= MV64x60_CPU_PROT_SIZE_2,
+		.base_bits		= 12,
+		.size_bits		= 12,
+		.get_from_field		= mv64x60_shift_left,
+		.map_to_field		= mv64x60_shift_right,
+		.extra			= 0 },
+	[MV64x60_CPU_PROT_3_WIN] = {
+		.base_reg		= MV64x60_CPU_PROT_BASE_3,
+		.size_reg		= MV64x60_CPU_PROT_SIZE_3,
+		.base_bits		= 12,
+		.size_bits		= 12,
+		.get_from_field		= mv64x60_shift_left,
+		.map_to_field		= mv64x60_shift_right,
+		.extra			= 0 },
+	/* CPU Snoop Windows */
+	[MV64x60_CPU_SNOOP_0_WIN] = {
+		.base_reg		= GT64260_CPU_SNOOP_BASE_0,
+		.size_reg		= GT64260_CPU_SNOOP_SIZE_0,
+		.base_bits		= 12,
+		.size_bits		= 12,
+		.get_from_field		= mv64x60_shift_left,
+		.map_to_field		= mv64x60_shift_right,
+		.extra			= 0 },
+	[MV64x60_CPU_SNOOP_1_WIN] = {
+		.base_reg		= GT64260_CPU_SNOOP_BASE_1,
+		.size_reg		= GT64260_CPU_SNOOP_SIZE_1,
+		.base_bits		= 12,
+		.size_bits		= 12,
+		.get_from_field		= mv64x60_shift_left,
+		.map_to_field		= mv64x60_shift_right,
+		.extra			= 0 },
+	[MV64x60_CPU_SNOOP_2_WIN] = {
+		.base_reg		= GT64260_CPU_SNOOP_BASE_2,
+		.size_reg		= GT64260_CPU_SNOOP_SIZE_2,
+		.base_bits		= 12,
+		.size_bits		= 12,
+		.get_from_field		= mv64x60_shift_left,
+		.map_to_field		= mv64x60_shift_right,
+		.extra			= 0 },
+	[MV64x60_CPU_SNOOP_3_WIN] = {
+		.base_reg		= GT64260_CPU_SNOOP_BASE_3,
+		.size_reg		= GT64260_CPU_SNOOP_SIZE_3,
+		.base_bits		= 12,
+		.size_bits		= 12,
+		.get_from_field		= mv64x60_shift_left,
+		.map_to_field		= mv64x60_shift_right,
+		.extra			= 0 },
+	/* PCI 0->System Memory Remap Windows */
+	[MV64x60_PCI02MEM_REMAP_0_WIN] = {
+		.base_reg		= MV64x60_PCI0_SLAVE_MEM_0_REMAP,
+		.size_reg		= 0,
+		.base_bits		= 20,
+		.size_bits		= 0,
+		.get_from_field		= mv64x60_mask,
+		.map_to_field		= mv64x60_mask,
+		.extra			= 0 },
+	[MV64x60_PCI02MEM_REMAP_1_WIN] = {
+		.base_reg		= MV64x60_PCI0_SLAVE_MEM_1_REMAP,
+		.size_reg		= 0,
+		.base_bits		= 20,
+		.size_bits		= 0,
+		.get_from_field		= mv64x60_mask,
+		.map_to_field		= mv64x60_mask,
+		.extra			= 0 },
+	[MV64x60_PCI02MEM_REMAP_2_WIN] = {
+		.base_reg		= MV64x60_PCI0_SLAVE_MEM_1_REMAP,
+		.size_reg		= 0,
+		.base_bits		= 20,
+		.size_bits		= 0,
+		.get_from_field		= mv64x60_mask,
+		.map_to_field		= mv64x60_mask,
+		.extra			= 0 },
+	[MV64x60_PCI02MEM_REMAP_3_WIN] = {
+		.base_reg		= MV64x60_PCI0_SLAVE_MEM_1_REMAP,
+		.size_reg		= 0,
+		.base_bits		= 20,
+		.size_bits		= 0,
+		.get_from_field		= mv64x60_mask,
+		.map_to_field		= mv64x60_mask,
+		.extra			= 0 },
+	/* PCI 1->System Memory Remap Windows */
+	[MV64x60_PCI12MEM_REMAP_0_WIN] = {
+		.base_reg		= MV64x60_PCI1_SLAVE_MEM_0_REMAP,
+		.size_reg		= 0,
+		.base_bits		= 20,
+		.size_bits		= 0,
+		.get_from_field		= mv64x60_mask,
+		.map_to_field		= mv64x60_mask,
+		.extra			= 0 },
+	[MV64x60_PCI12MEM_REMAP_1_WIN] = {
+		.base_reg		= MV64x60_PCI1_SLAVE_MEM_1_REMAP,
+		.size_reg		= 0,
+		.base_bits		= 20,
+		.size_bits		= 0,
+		.get_from_field		= mv64x60_mask,
+		.map_to_field		= mv64x60_mask,
+		.extra			= 0 },
+	[MV64x60_PCI12MEM_REMAP_2_WIN] = {
+		.base_reg		= MV64x60_PCI1_SLAVE_MEM_1_REMAP,
+		.size_reg		= 0,
+		.base_bits		= 20,
+		.size_bits		= 0,
+		.get_from_field		= mv64x60_mask,
+		.map_to_field		= mv64x60_mask,
+		.extra			= 0 },
+	[MV64x60_PCI12MEM_REMAP_3_WIN] = {
+		.base_reg		= MV64x60_PCI1_SLAVE_MEM_1_REMAP,
+		.size_reg		= 0,
+		.base_bits		= 20,
+		.size_bits		= 0,
+		.get_from_field		= mv64x60_mask,
+		.map_to_field		= mv64x60_mask,
+		.extra			= 0 },
+	/* ENET->SRAM Window (64260 doesn't have separate windows) */
+	/* MPSC->SRAM Window (64260 doesn't have separate windows) */
+	/* IDMA->SRAM Window (64260 doesn't have separate windows) */
+};
+
+struct mv64x60_64bit_window
+	gt64260_64bit_windows[MV64x60_64BIT_WIN_COUNT] __initdata = {
+	/* CPU->PCI 0 MEM Remap Windows */
+	[MV64x60_CPU2PCI0_MEM_0_REMAP_WIN] = {
+		.base_hi_reg		= MV64x60_CPU2PCI0_MEM_0_REMAP_HI,
+		.base_lo_reg		= MV64x60_CPU2PCI0_MEM_0_REMAP_LO,
+		.size_reg		= 0,
+		.base_lo_bits		= 12,
+		.size_bits		= 0,
+		.get_from_field		= mv64x60_shift_left,
+		.map_to_field		= mv64x60_shift_right,
+		.extra			= 0 },
+	[MV64x60_CPU2PCI0_MEM_1_REMAP_WIN] = {
+		.base_hi_reg		= MV64x60_CPU2PCI0_MEM_1_REMAP_HI,
+		.base_lo_reg		= MV64x60_CPU2PCI0_MEM_1_REMAP_LO,
+		.size_reg		= 0,
+		.base_lo_bits		= 12,
+		.size_bits		= 0,
+		.get_from_field		= mv64x60_shift_left,
+		.map_to_field		= mv64x60_shift_right,
+		.extra			= 0 },
+	[MV64x60_CPU2PCI0_MEM_2_REMAP_WIN] = {
+		.base_hi_reg		= MV64x60_CPU2PCI0_MEM_2_REMAP_HI,
+		.base_lo_reg		= MV64x60_CPU2PCI0_MEM_2_REMAP_LO,
+		.size_reg		= 0,
+		.base_lo_bits		= 12,
+		.size_bits		= 0,
+		.get_from_field		= mv64x60_shift_left,
+		.map_to_field		= mv64x60_shift_right,
+		.extra			= 0 },
+	[MV64x60_CPU2PCI0_MEM_3_REMAP_WIN] = {
+		.base_hi_reg		= MV64x60_CPU2PCI0_MEM_3_REMAP_HI,
+		.base_lo_reg		= MV64x60_CPU2PCI0_MEM_3_REMAP_LO,
+		.size_reg		= 0,
+		.base_lo_bits		= 12,
+		.size_bits		= 0,
+		.get_from_field		= mv64x60_shift_left,
+		.map_to_field		= mv64x60_shift_right,
+		.extra			= 0 },
+	/* CPU->PCI 1 MEM Remap Windows */
+	[MV64x60_CPU2PCI1_MEM_0_REMAP_WIN] = {
+		.base_hi_reg		= MV64x60_CPU2PCI1_MEM_0_REMAP_HI,
+		.base_lo_reg		= MV64x60_CPU2PCI1_MEM_0_REMAP_LO,
+		.size_reg		= 0,
+		.base_lo_bits		= 12,
+		.size_bits		= 0,
+		.get_from_field		= mv64x60_shift_left,
+		.map_to_field		= mv64x60_shift_right,
+		.extra			= 0 },
+	[MV64x60_CPU2PCI1_MEM_1_REMAP_WIN] = {
+		.base_hi_reg		= MV64x60_CPU2PCI1_MEM_1_REMAP_HI,
+		.base_lo_reg		= MV64x60_CPU2PCI1_MEM_1_REMAP_LO,
+		.size_reg		= 0,
+		.base_lo_bits		= 12,
+		.size_bits		= 0,
+		.get_from_field		= mv64x60_shift_left,
+		.map_to_field		= mv64x60_shift_right,
+		.extra			= 0 },
+	[MV64x60_CPU2PCI1_MEM_2_REMAP_WIN] = {
+		.base_hi_reg		= MV64x60_CPU2PCI1_MEM_2_REMAP_HI,
+		.base_lo_reg		= MV64x60_CPU2PCI1_MEM_2_REMAP_LO,
+		.size_reg		= 0,
+		.base_lo_bits		= 12,
+		.size_bits		= 0,
+		.get_from_field		= mv64x60_shift_left,
+		.map_to_field		= mv64x60_shift_right,
+		.extra			= 0 },
+	[MV64x60_CPU2PCI1_MEM_3_REMAP_WIN] = {
+		.base_hi_reg		= MV64x60_CPU2PCI1_MEM_3_REMAP_HI,
+		.base_lo_reg		= MV64x60_CPU2PCI1_MEM_3_REMAP_LO,
+		.size_reg		= 0,
+		.base_lo_bits		= 12,
+		.size_bits		= 0,
+		.get_from_field		= mv64x60_shift_left,
+		.map_to_field		= mv64x60_shift_right,
+		.extra			= 0 },
+	/* PCI 0->MEM Access Control Windows */
+	[MV64x60_PCI02MEM_ACC_CNTL_0_WIN] = {
+		.base_hi_reg		= MV64x60_PCI0_ACC_CNTL_0_BASE_HI,
+		.base_lo_reg		= MV64x60_PCI0_ACC_CNTL_0_BASE_LO,
+		.size_reg		= MV64x60_PCI0_ACC_CNTL_0_SIZE,
+		.base_lo_bits		= 12,
+		.size_bits		= 12,
+		.get_from_field		= mv64x60_shift_left,
+		.map_to_field		= mv64x60_shift_right,
+		.extra			= 0 },
+	[MV64x60_PCI02MEM_ACC_CNTL_1_WIN] = {
+		.base_hi_reg		= MV64x60_PCI0_ACC_CNTL_1_BASE_HI,
+		.base_lo_reg		= MV64x60_PCI0_ACC_CNTL_1_BASE_LO,
+		.size_reg		= MV64x60_PCI0_ACC_CNTL_1_SIZE,
+		.base_lo_bits		= 12,
+		.size_bits		= 12,
+		.get_from_field		= mv64x60_shift_left,
+		.map_to_field		= mv64x60_shift_right,
+		.extra			= 0 },
+	[MV64x60_PCI02MEM_ACC_CNTL_2_WIN] = {
+		.base_hi_reg		= MV64x60_PCI0_ACC_CNTL_2_BASE_HI,
+		.base_lo_reg		= MV64x60_PCI0_ACC_CNTL_2_BASE_LO,
+		.size_reg		= MV64x60_PCI0_ACC_CNTL_2_SIZE,
+		.base_lo_bits		= 12,
+		.size_bits		= 12,
+		.get_from_field		= mv64x60_shift_left,
+		.map_to_field		= mv64x60_shift_right,
+		.extra			= 0 },
+	[MV64x60_PCI02MEM_ACC_CNTL_3_WIN] = {
+		.base_hi_reg		= MV64x60_PCI0_ACC_CNTL_3_BASE_HI,
+		.base_lo_reg		= MV64x60_PCI0_ACC_CNTL_3_BASE_LO,
+		.size_reg		= MV64x60_PCI0_ACC_CNTL_3_SIZE,
+		.base_lo_bits		= 12,
+		.size_bits		= 12,
+		.get_from_field		= mv64x60_shift_left,
+		.map_to_field		= mv64x60_shift_right,
+		.extra			= 0 },
+	/* PCI 1->MEM Access Control Windows */
+	[MV64x60_PCI12MEM_ACC_CNTL_0_WIN] = {
+		.base_hi_reg		= MV64x60_PCI1_ACC_CNTL_0_BASE_HI,
+		.base_lo_reg		= MV64x60_PCI1_ACC_CNTL_0_BASE_LO,
+		.size_reg		= MV64x60_PCI1_ACC_CNTL_0_SIZE,
+		.base_lo_bits		= 12,
+		.size_bits		= 12,
+		.get_from_field		= mv64x60_shift_left,
+		.map_to_field		= mv64x60_shift_right,
+		.extra			= 0 },
+	[MV64x60_PCI12MEM_ACC_CNTL_1_WIN] = {
+		.base_hi_reg		= MV64x60_PCI1_ACC_CNTL_1_BASE_HI,
+		.base_lo_reg		= MV64x60_PCI1_ACC_CNTL_1_BASE_LO,
+		.size_reg		= MV64x60_PCI1_ACC_CNTL_1_SIZE,
+		.base_lo_bits		= 12,
+		.size_bits		= 12,
+		.get_from_field		= mv64x60_shift_left,
+		.map_to_field		= mv64x60_shift_right,
+		.extra			= 0 },
+	[MV64x60_PCI12MEM_ACC_CNTL_2_WIN] = {
+		.base_hi_reg		= MV64x60_PCI1_ACC_CNTL_2_BASE_HI,
+		.base_lo_reg		= MV64x60_PCI1_ACC_CNTL_2_BASE_LO,
+		.size_reg		= MV64x60_PCI1_ACC_CNTL_2_SIZE,
+		.base_lo_bits		= 12,
+		.size_bits		= 12,
+		.get_from_field		= mv64x60_shift_left,
+		.map_to_field		= mv64x60_shift_right,
+		.extra			= 0 },
+	[MV64x60_PCI12MEM_ACC_CNTL_3_WIN] = {
+		.base_hi_reg		= MV64x60_PCI1_ACC_CNTL_3_BASE_HI,
+		.base_lo_reg		= MV64x60_PCI1_ACC_CNTL_3_BASE_LO,
+		.size_reg		= MV64x60_PCI1_ACC_CNTL_3_SIZE,
+		.base_lo_bits		= 12,
+		.size_bits		= 12,
+		.get_from_field		= mv64x60_shift_left,
+		.map_to_field		= mv64x60_shift_right,
+		.extra			= 0 },
+	/* PCI 0->MEM Snoop Windows */
+	[MV64x60_PCI02MEM_SNOOP_0_WIN] = {
+		.base_hi_reg		= GT64260_PCI0_SNOOP_0_BASE_HI,
+		.base_lo_reg		= GT64260_PCI0_SNOOP_0_BASE_LO,
+		.size_reg		= GT64260_PCI0_SNOOP_0_SIZE,
+		.base_lo_bits		= 12,
+		.size_bits		= 12,
+		.get_from_field		= mv64x60_shift_left,
+		.map_to_field		= mv64x60_shift_right,
+		.extra			= 0 },
+	[MV64x60_PCI02MEM_SNOOP_1_WIN] = {
+		.base_hi_reg		= GT64260_PCI0_SNOOP_1_BASE_HI,
+		.base_lo_reg		= GT64260_PCI0_SNOOP_1_BASE_LO,
+		.size_reg		= GT64260_PCI0_SNOOP_1_SIZE,
+		.base_lo_bits		= 12,
+		.size_bits		= 12,
+		.get_from_field		= mv64x60_shift_left,
+		.map_to_field		= mv64x60_shift_right,
+		.extra			= 0 },
+	[MV64x60_PCI02MEM_SNOOP_2_WIN] = {
+		.base_hi_reg		= GT64260_PCI0_SNOOP_2_BASE_HI,
+		.base_lo_reg		= GT64260_PCI0_SNOOP_2_BASE_LO,
+		.size_reg		= GT64260_PCI0_SNOOP_2_SIZE,
+		.base_lo_bits		= 12,
+		.size_bits		= 12,
+		.get_from_field		= mv64x60_shift_left,
+		.map_to_field		= mv64x60_shift_right,
+		.extra			= 0 },
+	[MV64x60_PCI02MEM_SNOOP_3_WIN] = {
+		.base_hi_reg		= GT64260_PCI0_SNOOP_3_BASE_HI,
+		.base_lo_reg		= GT64260_PCI0_SNOOP_3_BASE_LO,
+		.size_reg		= GT64260_PCI0_SNOOP_3_SIZE,
+		.base_lo_bits		= 12,
+		.size_bits		= 12,
+		.get_from_field		= mv64x60_shift_left,
+		.map_to_field		= mv64x60_shift_right,
+		.extra			= 0 },
+	/* PCI 1->MEM Snoop Windows */
+	[MV64x60_PCI12MEM_SNOOP_0_WIN] = {
+		.base_hi_reg		= GT64260_PCI1_SNOOP_0_BASE_HI,
+		.base_lo_reg		= GT64260_PCI1_SNOOP_0_BASE_LO,
+		.size_reg		= GT64260_PCI1_SNOOP_0_SIZE,
+		.base_lo_bits		= 12,
+		.size_bits		= 12,
+		.get_from_field		= mv64x60_shift_left,
+		.map_to_field		= mv64x60_shift_right,
+		.extra			= 0 },
+	[MV64x60_PCI12MEM_SNOOP_1_WIN] = {
+		.base_hi_reg		= GT64260_PCI1_SNOOP_1_BASE_HI,
+		.base_lo_reg		= GT64260_PCI1_SNOOP_1_BASE_LO,
+		.size_reg		= GT64260_PCI1_SNOOP_1_SIZE,
+		.base_lo_bits		= 12,
+		.size_bits		= 12,
+		.get_from_field		= mv64x60_shift_left,
+		.map_to_field		= mv64x60_shift_right,
+		.extra			= 0 },
+	[MV64x60_PCI12MEM_SNOOP_2_WIN] = {
+		.base_hi_reg		= GT64260_PCI1_SNOOP_2_BASE_HI,
+		.base_lo_reg		= GT64260_PCI1_SNOOP_2_BASE_LO,
+		.size_reg		= GT64260_PCI1_SNOOP_2_SIZE,
+		.base_lo_bits		= 12,
+		.size_bits		= 12,
+		.get_from_field		= mv64x60_shift_left,
+		.map_to_field		= mv64x60_shift_right,
+		.extra			= 0 },
+	[MV64x60_PCI12MEM_SNOOP_3_WIN] = {
+		.base_hi_reg		= GT64260_PCI1_SNOOP_3_BASE_HI,
+		.base_lo_reg		= GT64260_PCI1_SNOOP_3_BASE_LO,
+		.size_reg		= GT64260_PCI1_SNOOP_3_SIZE,
+		.base_lo_bits		= 12,
+		.size_bits		= 12,
+		.get_from_field		= mv64x60_shift_left,
+		.map_to_field		= mv64x60_shift_right,
+		.extra			= 0 },
+};
+
+struct mv64x60_32bit_window
+	mv64360_32bit_windows[MV64x60_32BIT_WIN_COUNT] __initdata = {
+	/* CPU->MEM Windows */
+	[MV64x60_CPU2MEM_0_WIN] = {
+		.base_reg		= MV64x60_CPU2MEM_0_BASE,
+		.size_reg		= MV64x60_CPU2MEM_0_SIZE,
+		.base_bits		= 16,
+		.size_bits		= 16,
+		.get_from_field		= mv64x60_shift_left,
+		.map_to_field		= mv64x60_shift_right,
+		.extra			= MV64x60_EXTRA_CPUWIN_ENAB | 0 },
+	[MV64x60_CPU2MEM_1_WIN] = {
+		.base_reg		= MV64x60_CPU2MEM_1_BASE,
+		.size_reg		= MV64x60_CPU2MEM_1_SIZE,
+		.base_bits		= 16,
+		.size_bits		= 16,
+		.get_from_field		= mv64x60_shift_left,
+		.map_to_field		= mv64x60_shift_right,
+		.extra			= MV64x60_EXTRA_CPUWIN_ENAB | 1 },
+	[MV64x60_CPU2MEM_2_WIN] = {
+		.base_reg		= MV64x60_CPU2MEM_2_BASE,
+		.size_reg		= MV64x60_CPU2MEM_2_SIZE,
+		.base_bits		= 16,
+		.size_bits		= 16,
+		.get_from_field		= mv64x60_shift_left,
+		.map_to_field		= mv64x60_shift_right,
+		.extra			= MV64x60_EXTRA_CPUWIN_ENAB | 2 },
+	[MV64x60_CPU2MEM_3_WIN] = {
+		.base_reg		= MV64x60_CPU2MEM_3_BASE,
+		.size_reg		= MV64x60_CPU2MEM_3_SIZE,
+		.base_bits		= 16,
+		.size_bits		= 16,
+		.get_from_field		= mv64x60_shift_left,
+		.map_to_field		= mv64x60_shift_right,
+		.extra			= MV64x60_EXTRA_CPUWIN_ENAB | 3 },
+	/* CPU->Device Windows */
+	[MV64x60_CPU2DEV_0_WIN] = {
+		.base_reg		= MV64x60_CPU2DEV_0_BASE,
+		.size_reg		= MV64x60_CPU2DEV_0_SIZE,
+		.base_bits		= 16,
+		.size_bits		= 16,
+		.get_from_field		= mv64x60_shift_left,
+		.map_to_field		= mv64x60_shift_right,
+		.extra			= MV64x60_EXTRA_CPUWIN_ENAB | 4 },
+	[MV64x60_CPU2DEV_1_WIN] = {
+		.base_reg		= MV64x60_CPU2DEV_1_BASE,
+		.size_reg		= MV64x60_CPU2DEV_1_SIZE,
+		.base_bits		= 16,
+		.size_bits		= 16,
+		.get_from_field		= mv64x60_shift_left,
+		.map_to_field		= mv64x60_shift_right,
+		.extra			= MV64x60_EXTRA_CPUWIN_ENAB | 5 },
+	[MV64x60_CPU2DEV_2_WIN] = {
+		.base_reg		= MV64x60_CPU2DEV_2_BASE,
+		.size_reg		= MV64x60_CPU2DEV_2_SIZE,
+		.base_bits		= 16,
+		.size_bits		= 16,
+		.get_from_field		= mv64x60_shift_left,
+		.map_to_field		= mv64x60_shift_right,
+		.extra			= MV64x60_EXTRA_CPUWIN_ENAB | 6 },
+	[MV64x60_CPU2DEV_3_WIN] = {
+		.base_reg		= MV64x60_CPU2DEV_3_BASE,
+		.size_reg		= MV64x60_CPU2DEV_3_SIZE,
+		.base_bits		= 16,
+		.size_bits		= 16,
+		.get_from_field		= mv64x60_shift_left,
+		.map_to_field		= mv64x60_shift_right,
+		.extra			= MV64x60_EXTRA_CPUWIN_ENAB | 7 },
+	/* CPU->Boot Window */
+	[MV64x60_CPU2BOOT_WIN] = {
+		.base_reg		= MV64x60_CPU2BOOT_0_BASE,
+		.size_reg		= MV64x60_CPU2BOOT_0_SIZE,
+		.base_bits		= 16,
+		.size_bits		= 16,
+		.get_from_field		= mv64x60_shift_left,
+		.map_to_field		= mv64x60_shift_right,
+		.extra			= MV64x60_EXTRA_CPUWIN_ENAB | 8 },
+	/* CPU->PCI 0 Windows */
+	[MV64x60_CPU2PCI0_IO_WIN] = {
+		.base_reg		= MV64x60_CPU2PCI0_IO_BASE,
+		.size_reg		= MV64x60_CPU2PCI0_IO_SIZE,
+		.base_bits		= 16,
+		.size_bits		= 16,
+		.get_from_field		= mv64x60_shift_left,
+		.map_to_field		= mv64x60_shift_right,
+		.extra			= MV64x60_EXTRA_CPUWIN_ENAB | 9 },
+	[MV64x60_CPU2PCI0_MEM_0_WIN] = {
+		.base_reg		= MV64x60_CPU2PCI0_MEM_0_BASE,
+		.size_reg		= MV64x60_CPU2PCI0_MEM_0_SIZE,
+		.base_bits		= 16,
+		.size_bits		= 16,
+		.get_from_field		= mv64x60_shift_left,
+		.map_to_field		= mv64x60_shift_right,
+		.extra			= MV64x60_EXTRA_CPUWIN_ENAB | 10 },
+	[MV64x60_CPU2PCI0_MEM_1_WIN] = {
+		.base_reg		= MV64x60_CPU2PCI0_MEM_1_BASE,
+		.size_reg		= MV64x60_CPU2PCI0_MEM_1_SIZE,
+		.base_bits		= 16,
+		.size_bits		= 16,
+		.get_from_field		= mv64x60_shift_left,
+		.map_to_field		= mv64x60_shift_right,
+		.extra			= MV64x60_EXTRA_CPUWIN_ENAB | 11 },
+	[MV64x60_CPU2PCI0_MEM_2_WIN] = {
+		.base_reg		= MV64x60_CPU2PCI0_MEM_2_BASE,
+		.size_reg		= MV64x60_CPU2PCI0_MEM_2_SIZE,
+		.base_bits		= 16,
+		.size_bits		= 16,
+		.get_from_field		= mv64x60_shift_left,
+		.map_to_field		= mv64x60_shift_right,
+		.extra			= MV64x60_EXTRA_CPUWIN_ENAB | 12 },
+	[MV64x60_CPU2PCI0_MEM_3_WIN] = {
+		.base_reg		= MV64x60_CPU2PCI0_MEM_3_BASE,
+		.size_reg		= MV64x60_CPU2PCI0_MEM_3_SIZE,
+		.base_bits		= 16,
+		.size_bits		= 16,
+		.get_from_field		= mv64x60_shift_left,
+		.map_to_field		= mv64x60_shift_right,
+		.extra			= MV64x60_EXTRA_CPUWIN_ENAB | 13 },
+	/* CPU->PCI 1 Windows */
+	[MV64x60_CPU2PCI1_IO_WIN] = {
+		.base_reg		= MV64x60_CPU2PCI1_IO_BASE,
+		.size_reg		= MV64x60_CPU2PCI1_IO_SIZE,
+		.base_bits		= 16,
+		.size_bits		= 16,
+		.get_from_field		= mv64x60_shift_left,
+		.map_to_field		= mv64x60_shift_right,
+		.extra			= MV64x60_EXTRA_CPUWIN_ENAB | 14 },
+	[MV64x60_CPU2PCI1_MEM_0_WIN] = {
+		.base_reg		= MV64x60_CPU2PCI1_MEM_0_BASE,
+		.size_reg		= MV64x60_CPU2PCI1_MEM_0_SIZE,
+		.base_bits		= 16,
+		.size_bits		= 16,
+		.get_from_field		= mv64x60_shift_left,
+		.map_to_field		= mv64x60_shift_right,
+		.extra			= MV64x60_EXTRA_CPUWIN_ENAB | 15 },
+	[MV64x60_CPU2PCI1_MEM_1_WIN] = {
+		.base_reg		= MV64x60_CPU2PCI1_MEM_1_BASE,
+		.size_reg		= MV64x60_CPU2PCI1_MEM_1_SIZE,
+		.base_bits		= 16,
+		.size_bits		= 16,
+		.get_from_field		= mv64x60_shift_left,
+		.map_to_field		= mv64x60_shift_right,
+		.extra			= MV64x60_EXTRA_CPUWIN_ENAB | 16 },
+	[MV64x60_CPU2PCI1_MEM_2_WIN] = {
+		.base_reg		= MV64x60_CPU2PCI1_MEM_2_BASE,
+		.size_reg		= MV64x60_CPU2PCI1_MEM_2_SIZE,
+		.base_bits		= 16,
+		.size_bits		= 16,
+		.get_from_field		= mv64x60_shift_left,
+		.map_to_field		= mv64x60_shift_right,
+		.extra			= MV64x60_EXTRA_CPUWIN_ENAB | 17 },
+	[MV64x60_CPU2PCI1_MEM_3_WIN] = {
+		.base_reg		= MV64x60_CPU2PCI1_MEM_3_BASE,
+		.size_reg		= MV64x60_CPU2PCI1_MEM_3_SIZE,
+		.base_bits		= 16,
+		.size_bits		= 16,
+		.get_from_field		= mv64x60_shift_left,
+		.map_to_field		= mv64x60_shift_right,
+		.extra			= MV64x60_EXTRA_CPUWIN_ENAB | 18 },
+	/* CPU->SRAM Window */
+	[MV64x60_CPU2SRAM_WIN] = {
+		.base_reg		= MV64360_CPU2SRAM_BASE,
+		.size_reg		= 0,
+		.base_bits		= 16,
+		.size_bits		= 0,
+		.get_from_field		= mv64x60_shift_left,
+		.map_to_field		= mv64x60_shift_right,
+		.extra			= MV64x60_EXTRA_CPUWIN_ENAB | 19 },
+	/* CPU->PCI 0 Remap I/O Window */
+	[MV64x60_CPU2PCI0_IO_REMAP_WIN] = {
+		.base_reg		= MV64x60_CPU2PCI0_IO_REMAP,
+		.size_reg		= 0,
+		.base_bits		= 16,
+		.size_bits		= 0,
+		.get_from_field		= mv64x60_shift_left,
+		.map_to_field		= mv64x60_shift_right,
+		.extra			= 0 },
+	/* CPU->PCI 1 Remap I/O Window */
+	[MV64x60_CPU2PCI1_IO_REMAP_WIN] = {
+		.base_reg		= MV64x60_CPU2PCI1_IO_REMAP,
+		.size_reg		= 0,
+		.base_bits		= 16,
+		.size_bits		= 0,
+		.get_from_field		= mv64x60_shift_left,
+		.map_to_field		= mv64x60_shift_right,
+		.extra			= 0 },
+	/* CPU Memory Protection Windows */
+	[MV64x60_CPU_PROT_0_WIN] = {
+		.base_reg		= MV64x60_CPU_PROT_BASE_0,
+		.size_reg		= MV64x60_CPU_PROT_SIZE_0,
+		.base_bits		= 16,
+		.size_bits		= 16,
+		.get_from_field		= mv64x60_shift_left,
+		.map_to_field		= mv64x60_shift_right,
+		.extra			= MV64x60_EXTRA_CPUPROT_ENAB | 31 },
+	[MV64x60_CPU_PROT_1_WIN] = {
+		.base_reg		= MV64x60_CPU_PROT_BASE_1,
+		.size_reg		= MV64x60_CPU_PROT_SIZE_1,
+		.base_bits		= 16,
+		.size_bits		= 16,
+		.get_from_field		= mv64x60_shift_left,
+		.map_to_field		= mv64x60_shift_right,
+		.extra			= MV64x60_EXTRA_CPUPROT_ENAB | 31 },
+	[MV64x60_CPU_PROT_2_WIN] = {
+		.base_reg		= MV64x60_CPU_PROT_BASE_2,
+		.size_reg		= MV64x60_CPU_PROT_SIZE_2,
+		.base_bits		= 16,
+		.size_bits		= 16,
+		.get_from_field		= mv64x60_shift_left,
+		.map_to_field		= mv64x60_shift_right,
+		.extra			= MV64x60_EXTRA_CPUPROT_ENAB | 31 },
+	[MV64x60_CPU_PROT_3_WIN] = {
+		.base_reg		= MV64x60_CPU_PROT_BASE_3,
+		.size_reg		= MV64x60_CPU_PROT_SIZE_3,
+		.base_bits		= 16,
+		.size_bits		= 16,
+		.get_from_field		= mv64x60_shift_left,
+		.map_to_field		= mv64x60_shift_right,
+		.extra			= MV64x60_EXTRA_CPUPROT_ENAB | 31 },
+	/* CPU Snoop Windows -- don't exist on 64360 */
+	/* PCI 0->System Memory Remap Windows */
+	[MV64x60_PCI02MEM_REMAP_0_WIN] = {
+		.base_reg		= MV64x60_PCI0_SLAVE_MEM_0_REMAP,
+		.size_reg		= 0,
+		.base_bits		= 20,
+		.size_bits		= 0,
+		.get_from_field		= mv64x60_mask,
+		.map_to_field		= mv64x60_mask,
+		.extra			= 0 },
+	[MV64x60_PCI02MEM_REMAP_1_WIN] = {
+		.base_reg		= MV64x60_PCI0_SLAVE_MEM_1_REMAP,
+		.size_reg		= 0,
+		.base_bits		= 20,
+		.size_bits		= 0,
+		.get_from_field		= mv64x60_mask,
+		.map_to_field		= mv64x60_mask,
+		.extra			= 0 },
+	[MV64x60_PCI02MEM_REMAP_2_WIN] = {
+		.base_reg		= MV64x60_PCI0_SLAVE_MEM_1_REMAP,
+		.size_reg		= 0,
+		.base_bits		= 20,
+		.size_bits		= 0,
+		.get_from_field		= mv64x60_mask,
+		.map_to_field		= mv64x60_mask,
+		.extra			= 0 },
+	[MV64x60_PCI02MEM_REMAP_3_WIN] = {
+		.base_reg		= MV64x60_PCI0_SLAVE_MEM_1_REMAP,
+		.size_reg		= 0,
+		.base_bits		= 20,
+		.size_bits		= 0,
+		.get_from_field		= mv64x60_mask,
+		.map_to_field		= mv64x60_mask,
+		.extra			= 0 },
+	/* PCI 1->System Memory Remap Windows */
+	[MV64x60_PCI12MEM_REMAP_0_WIN] = {
+		.base_reg		= MV64x60_PCI1_SLAVE_MEM_0_REMAP,
+		.size_reg		= 0,
+		.base_bits		= 20,
+		.size_bits		= 0,
+		.get_from_field		= mv64x60_mask,
+		.map_to_field		= mv64x60_mask,
+		.extra			= 0 },
+	[MV64x60_PCI12MEM_REMAP_1_WIN] = {
+		.base_reg		= MV64x60_PCI1_SLAVE_MEM_1_REMAP,
+		.size_reg		= 0,
+		.base_bits		= 20,
+		.size_bits		= 0,
+		.get_from_field		= mv64x60_mask,
+		.map_to_field		= mv64x60_mask,
+		.extra			= 0 },
+	[MV64x60_PCI12MEM_REMAP_2_WIN] = {
+		.base_reg		= MV64x60_PCI1_SLAVE_MEM_1_REMAP,
+		.size_reg		= 0,
+		.base_bits		= 20,
+		.size_bits		= 0,
+		.get_from_field		= mv64x60_mask,
+		.map_to_field		= mv64x60_mask,
+		.extra			= 0 },
+	[MV64x60_PCI12MEM_REMAP_3_WIN] = {
+		.base_reg		= MV64x60_PCI1_SLAVE_MEM_1_REMAP,
+		.size_reg		= 0,
+		.base_bits		= 20,
+		.size_bits		= 0,
+		.get_from_field		= mv64x60_mask,
+		.map_to_field		= mv64x60_mask,
+		.extra			= 0 },
+	/* ENET->System Memory Windows */
+	[MV64x60_ENET2MEM_0_WIN] = {
+		.base_reg		= MV64360_ENET2MEM_0_BASE,
+		.size_reg		= MV64360_ENET2MEM_0_SIZE,
+		.base_bits		= 16,
+		.size_bits		= 16,
+		.get_from_field		= mv64x60_mask,
+		.map_to_field		= mv64x60_mask,
+		.extra			= MV64x60_EXTRA_ENET_ENAB | 0 },
+	[MV64x60_ENET2MEM_1_WIN] = {
+		.base_reg		= MV64360_ENET2MEM_1_BASE,
+		.size_reg		= MV64360_ENET2MEM_1_SIZE,
+		.base_bits		= 16,
+		.size_bits		= 16,
+		.get_from_field		= mv64x60_mask,
+		.map_to_field		= mv64x60_mask,
+		.extra			= MV64x60_EXTRA_ENET_ENAB | 1 },
+	[MV64x60_ENET2MEM_2_WIN] = {
+		.base_reg		= MV64360_ENET2MEM_2_BASE,
+		.size_reg		= MV64360_ENET2MEM_2_SIZE,
+		.base_bits		= 16,
+		.size_bits		= 16,
+		.get_from_field		= mv64x60_mask,
+		.map_to_field		= mv64x60_mask,
+		.extra			= MV64x60_EXTRA_ENET_ENAB | 2 },
+	[MV64x60_ENET2MEM_3_WIN] = {
+		.base_reg		= MV64360_ENET2MEM_3_BASE,
+		.size_reg		= MV64360_ENET2MEM_3_SIZE,
+		.base_bits		= 16,
+		.size_bits		= 16,
+		.get_from_field		= mv64x60_mask,
+		.map_to_field		= mv64x60_mask,
+		.extra			= MV64x60_EXTRA_ENET_ENAB | 3 },
+	[MV64x60_ENET2MEM_4_WIN] = {
+		.base_reg		= MV64360_ENET2MEM_4_BASE,
+		.size_reg		= MV64360_ENET2MEM_4_SIZE,
+		.base_bits		= 16,
+		.size_bits		= 16,
+		.get_from_field		= mv64x60_mask,
+		.map_to_field		= mv64x60_mask,
+		.extra			= MV64x60_EXTRA_ENET_ENAB | 4 },
+	[MV64x60_ENET2MEM_5_WIN] = {
+		.base_reg		= MV64360_ENET2MEM_5_BASE,
+		.size_reg		= MV64360_ENET2MEM_5_SIZE,
+		.base_bits		= 16,
+		.size_bits		= 16,
+		.get_from_field		= mv64x60_mask,
+		.map_to_field		= mv64x60_mask,
+		.extra			= MV64x60_EXTRA_ENET_ENAB | 5 },
+	/* MPSC->System Memory Windows */
+	[MV64x60_MPSC2MEM_0_WIN] = {
+		.base_reg		= MV64360_MPSC2MEM_0_BASE,
+		.size_reg		= MV64360_MPSC2MEM_0_SIZE,
+		.base_bits		= 16,
+		.size_bits		= 16,
+		.get_from_field		= mv64x60_mask,
+		.map_to_field		= mv64x60_mask,
+		.extra			= MV64x60_EXTRA_MPSC_ENAB | 0 },
+	[MV64x60_MPSC2MEM_1_WIN] = {
+		.base_reg		= MV64360_MPSC2MEM_1_BASE,
+		.size_reg		= MV64360_MPSC2MEM_1_SIZE,
+		.base_bits		= 16,
+		.size_bits		= 16,
+		.get_from_field		= mv64x60_mask,
+		.map_to_field		= mv64x60_mask,
+		.extra			= MV64x60_EXTRA_MPSC_ENAB | 1 },
+	[MV64x60_MPSC2MEM_2_WIN] = {
+		.base_reg		= MV64360_MPSC2MEM_2_BASE,
+		.size_reg		= MV64360_MPSC2MEM_2_SIZE,
+		.base_bits		= 16,
+		.size_bits		= 16,
+		.get_from_field		= mv64x60_mask,
+		.map_to_field		= mv64x60_mask,
+		.extra			= MV64x60_EXTRA_MPSC_ENAB | 2 },
+	[MV64x60_MPSC2MEM_3_WIN] = {
+		.base_reg		= MV64360_MPSC2MEM_3_BASE,
+		.size_reg		= MV64360_MPSC2MEM_3_SIZE,
+		.base_bits		= 16,
+		.size_bits		= 16,
+		.get_from_field		= mv64x60_mask,
+		.map_to_field		= mv64x60_mask,
+		.extra			= MV64x60_EXTRA_MPSC_ENAB | 3 },
+	/* IDMA->System Memory Windows */
+	[MV64x60_IDMA2MEM_0_WIN] = {
+		.base_reg		= MV64360_IDMA2MEM_0_BASE,
+		.size_reg		= MV64360_IDMA2MEM_0_SIZE,
+		.base_bits		= 16,
+		.size_bits		= 16,
+		.get_from_field		= mv64x60_mask,
+		.map_to_field		= mv64x60_mask,
+		.extra			= MV64x60_EXTRA_IDMA_ENAB | 0 },
+	[MV64x60_IDMA2MEM_1_WIN] = {
+		.base_reg		= MV64360_IDMA2MEM_1_BASE,
+		.size_reg		= MV64360_IDMA2MEM_1_SIZE,
+		.base_bits		= 16,
+		.size_bits		= 16,
+		.get_from_field		= mv64x60_mask,
+		.map_to_field		= mv64x60_mask,
+		.extra			= MV64x60_EXTRA_IDMA_ENAB | 1 },
+	[MV64x60_IDMA2MEM_2_WIN] = {
+		.base_reg		= MV64360_IDMA2MEM_2_BASE,
+		.size_reg		= MV64360_IDMA2MEM_2_SIZE,
+		.base_bits		= 16,
+		.size_bits		= 16,
+		.get_from_field		= mv64x60_mask,
+		.map_to_field		= mv64x60_mask,
+		.extra			= MV64x60_EXTRA_IDMA_ENAB | 2 },
+	[MV64x60_IDMA2MEM_3_WIN] = {
+		.base_reg		= MV64360_IDMA2MEM_3_BASE,
+		.size_reg		= MV64360_IDMA2MEM_3_SIZE,
+		.base_bits		= 16,
+		.size_bits		= 16,
+		.get_from_field		= mv64x60_mask,
+		.map_to_field		= mv64x60_mask,
+		.extra			= MV64x60_EXTRA_IDMA_ENAB | 3 },
+	[MV64x60_IDMA2MEM_4_WIN] = {
+		.base_reg		= MV64360_IDMA2MEM_4_BASE,
+		.size_reg		= MV64360_IDMA2MEM_4_SIZE,
+		.base_bits		= 16,
+		.size_bits		= 16,
+		.get_from_field		= mv64x60_mask,
+		.map_to_field		= mv64x60_mask,
+		.extra			= MV64x60_EXTRA_IDMA_ENAB | 4 },
+	[MV64x60_IDMA2MEM_5_WIN] = {
+		.base_reg		= MV64360_IDMA2MEM_5_BASE,
+		.size_reg		= MV64360_IDMA2MEM_5_SIZE,
+		.base_bits		= 16,
+		.size_bits		= 16,
+		.get_from_field		= mv64x60_mask,
+		.map_to_field		= mv64x60_mask,
+		.extra			= MV64x60_EXTRA_IDMA_ENAB | 5 },
+	[MV64x60_IDMA2MEM_6_WIN] = {
+		.base_reg		= MV64360_IDMA2MEM_6_BASE,
+		.size_reg		= MV64360_IDMA2MEM_6_SIZE,
+		.base_bits		= 16,
+		.size_bits		= 16,
+		.get_from_field		= mv64x60_mask,
+		.map_to_field		= mv64x60_mask,
+		.extra			= MV64x60_EXTRA_IDMA_ENAB | 6 },
+	[MV64x60_IDMA2MEM_7_WIN] = {
+		.base_reg		= MV64360_IDMA2MEM_7_BASE,
+		.size_reg		= MV64360_IDMA2MEM_7_SIZE,
+		.base_bits		= 16,
+		.size_bits		= 16,
+		.get_from_field		= mv64x60_mask,
+		.map_to_field		= mv64x60_mask,
+		.extra			= MV64x60_EXTRA_IDMA_ENAB | 7 },
+};
+
+struct mv64x60_64bit_window
+	mv64360_64bit_windows[MV64x60_64BIT_WIN_COUNT] __initdata = {
+	/* CPU->PCI 0 MEM Remap Windows */
+	[MV64x60_CPU2PCI0_MEM_0_REMAP_WIN] = {
+		.base_hi_reg		= MV64x60_CPU2PCI0_MEM_0_REMAP_HI,
+		.base_lo_reg		= MV64x60_CPU2PCI0_MEM_0_REMAP_LO,
+		.size_reg		= 0,
+		.base_lo_bits		= 16,
+		.size_bits		= 0,
+		.get_from_field		= mv64x60_shift_left,
+		.map_to_field		= mv64x60_shift_right,
+		.extra			= 0 },
+	[MV64x60_CPU2PCI0_MEM_1_REMAP_WIN] = {
+		.base_hi_reg		= MV64x60_CPU2PCI0_MEM_1_REMAP_HI,
+		.base_lo_reg		= MV64x60_CPU2PCI0_MEM_1_REMAP_LO,
+		.size_reg		= 0,
+		.base_lo_bits		= 16,
+		.size_bits		= 0,
+		.get_from_field		= mv64x60_shift_left,
+		.map_to_field		= mv64x60_shift_right,
+		.extra			= 0 },
+	[MV64x60_CPU2PCI0_MEM_2_REMAP_WIN] = {
+		.base_hi_reg		= MV64x60_CPU2PCI0_MEM_2_REMAP_HI,
+		.base_lo_reg		= MV64x60_CPU2PCI0_MEM_2_REMAP_LO,
+		.size_reg		= 0,
+		.base_lo_bits		= 16,
+		.size_bits		= 0,
+		.get_from_field		= mv64x60_shift_left,
+		.map_to_field		= mv64x60_shift_right,
+		.extra			= 0 },
+	[MV64x60_CPU2PCI0_MEM_3_REMAP_WIN] = {
+		.base_hi_reg		= MV64x60_CPU2PCI0_MEM_3_REMAP_HI,
+		.base_lo_reg		= MV64x60_CPU2PCI0_MEM_3_REMAP_LO,
+		.size_reg		= 0,
+		.base_lo_bits		= 16,
+		.size_bits		= 0,
+		.get_from_field		= mv64x60_shift_left,
+		.map_to_field		= mv64x60_shift_right,
+		.extra			= 0 },
+	/* CPU->PCI 1 MEM Remap Windows */
+	[MV64x60_CPU2PCI1_MEM_0_REMAP_WIN] = {
+		.base_hi_reg		= MV64x60_CPU2PCI1_MEM_0_REMAP_HI,
+		.base_lo_reg		= MV64x60_CPU2PCI1_MEM_0_REMAP_LO,
+		.size_reg		= 0,
+		.base_lo_bits		= 16,
+		.size_bits		= 0,
+		.get_from_field		= mv64x60_shift_left,
+		.map_to_field		= mv64x60_shift_right,
+		.extra			= 0 },
+	[MV64x60_CPU2PCI1_MEM_1_REMAP_WIN] = {
+		.base_hi_reg		= MV64x60_CPU2PCI1_MEM_1_REMAP_HI,
+		.base_lo_reg		= MV64x60_CPU2PCI1_MEM_1_REMAP_LO,
+		.size_reg		= 0,
+		.base_lo_bits		= 16,
+		.size_bits		= 0,
+		.get_from_field		= mv64x60_shift_left,
+		.map_to_field		= mv64x60_shift_right,
+		.extra			= 0 },
+	[MV64x60_CPU2PCI1_MEM_2_REMAP_WIN] = {
+		.base_hi_reg		= MV64x60_CPU2PCI1_MEM_2_REMAP_HI,
+		.base_lo_reg		= MV64x60_CPU2PCI1_MEM_2_REMAP_LO,
+		.size_reg		= 0,
+		.base_lo_bits		= 16,
+		.size_bits		= 0,
+		.get_from_field		= mv64x60_shift_left,
+		.map_to_field		= mv64x60_shift_right,
+		.extra			= 0 },
+	[MV64x60_CPU2PCI1_MEM_3_REMAP_WIN] = {
+		.base_hi_reg		= MV64x60_CPU2PCI1_MEM_3_REMAP_HI,
+		.base_lo_reg		= MV64x60_CPU2PCI1_MEM_3_REMAP_LO,
+		.size_reg		= 0,
+		.base_lo_bits		= 16,
+		.size_bits		= 0,
+		.get_from_field		= mv64x60_shift_left,
+		.map_to_field		= mv64x60_shift_right,
+		.extra			= 0 },
+	/* PCI 0->MEM Access Control Windows */
+	[MV64x60_PCI02MEM_ACC_CNTL_0_WIN] = {
+		.base_hi_reg		= MV64x60_PCI0_ACC_CNTL_0_BASE_HI,
+		.base_lo_reg		= MV64x60_PCI0_ACC_CNTL_0_BASE_LO,
+		.size_reg		= MV64x60_PCI0_ACC_CNTL_0_SIZE,
+		.base_lo_bits		= 20,
+		.size_bits		= 20,
+		.get_from_field		= mv64x60_mask,
+		.map_to_field		= mv64x60_mask,
+		.extra			= MV64x60_EXTRA_PCIACC_ENAB | 0 },
+	[MV64x60_PCI02MEM_ACC_CNTL_1_WIN] = {
+		.base_hi_reg		= MV64x60_PCI0_ACC_CNTL_1_BASE_HI,
+		.base_lo_reg		= MV64x60_PCI0_ACC_CNTL_1_BASE_LO,
+		.size_reg		= MV64x60_PCI0_ACC_CNTL_1_SIZE,
+		.base_lo_bits		= 20,
+		.size_bits		= 20,
+		.get_from_field		= mv64x60_mask,
+		.map_to_field		= mv64x60_mask,
+		.extra			= MV64x60_EXTRA_PCIACC_ENAB | 0 },
+	[MV64x60_PCI02MEM_ACC_CNTL_2_WIN] = {
+		.base_hi_reg		= MV64x60_PCI0_ACC_CNTL_2_BASE_HI,
+		.base_lo_reg		= MV64x60_PCI0_ACC_CNTL_2_BASE_LO,
+		.size_reg		= MV64x60_PCI0_ACC_CNTL_2_SIZE,
+		.base_lo_bits		= 20,
+		.size_bits		= 20,
+		.get_from_field		= mv64x60_mask,
+		.map_to_field		= mv64x60_mask,
+		.extra			= MV64x60_EXTRA_PCIACC_ENAB | 0 },
+	[MV64x60_PCI02MEM_ACC_CNTL_3_WIN] = {
+		.base_hi_reg		= MV64x60_PCI0_ACC_CNTL_3_BASE_HI,
+		.base_lo_reg		= MV64x60_PCI0_ACC_CNTL_3_BASE_LO,
+		.size_reg		= MV64x60_PCI0_ACC_CNTL_3_SIZE,
+		.base_lo_bits		= 20,
+		.size_bits		= 20,
+		.get_from_field		= mv64x60_mask,
+		.map_to_field		= mv64x60_mask,
+		.extra			= MV64x60_EXTRA_PCIACC_ENAB | 0 },
+	/* PCI 1->MEM Access Control Windows */
+	[MV64x60_PCI12MEM_ACC_CNTL_0_WIN] = {
+		.base_hi_reg		= MV64x60_PCI1_ACC_CNTL_0_BASE_HI,
+		.base_lo_reg		= MV64x60_PCI1_ACC_CNTL_0_BASE_LO,
+		.size_reg		= MV64x60_PCI1_ACC_CNTL_0_SIZE,
+		.base_lo_bits		= 20,
+		.size_bits		= 20,
+		.get_from_field		= mv64x60_mask,
+		.map_to_field		= mv64x60_mask,
+		.extra			= MV64x60_EXTRA_PCIACC_ENAB | 0 },
+	[MV64x60_PCI12MEM_ACC_CNTL_1_WIN] = {
+		.base_hi_reg		= MV64x60_PCI1_ACC_CNTL_1_BASE_HI,
+		.base_lo_reg		= MV64x60_PCI1_ACC_CNTL_1_BASE_LO,
+		.size_reg		= MV64x60_PCI1_ACC_CNTL_1_SIZE,
+		.base_lo_bits		= 20,
+		.size_bits		= 20,
+		.get_from_field		= mv64x60_mask,
+		.map_to_field		= mv64x60_mask,
+		.extra			= MV64x60_EXTRA_PCIACC_ENAB | 0 },
+	[MV64x60_PCI12MEM_ACC_CNTL_2_WIN] = {
+		.base_hi_reg		= MV64x60_PCI1_ACC_CNTL_2_BASE_HI,
+		.base_lo_reg		= MV64x60_PCI1_ACC_CNTL_2_BASE_LO,
+		.size_reg		= MV64x60_PCI1_ACC_CNTL_2_SIZE,
+		.base_lo_bits		= 20,
+		.size_bits		= 20,
+		.get_from_field		= mv64x60_mask,
+		.map_to_field		= mv64x60_mask,
+		.extra			= MV64x60_EXTRA_PCIACC_ENAB | 0 },
+	[MV64x60_PCI12MEM_ACC_CNTL_3_WIN] = {
+		.base_hi_reg		= MV64x60_PCI1_ACC_CNTL_3_BASE_HI,
+		.base_lo_reg		= MV64x60_PCI1_ACC_CNTL_3_BASE_LO,
+		.size_reg		= MV64x60_PCI1_ACC_CNTL_3_SIZE,
+		.base_lo_bits		= 20,
+		.size_bits		= 20,
+		.get_from_field		= mv64x60_mask,
+		.map_to_field		= mv64x60_mask,
+		.extra			= MV64x60_EXTRA_PCIACC_ENAB | 0 },
+	/* PCI 0->MEM Snoop Windows -- don't exist on 64360 */
+	/* PCI 1->MEM Snoop Windows -- don't exist on 64360 */
+};
diff --git a/arch/ppc/syslib/ocp.c b/arch/ppc/syslib/ocp.c
new file mode 100644
index 000000000000..a5156c5179a6
--- /dev/null
+++ b/arch/ppc/syslib/ocp.c
@@ -0,0 +1,485 @@
+/*
+ * ocp.c
+ *
+ *      (c) Benjamin Herrenschmidt (benh@kernel.crashing.org)
+ *          Mipsys - France
+ *
+ *          Derived from work (c) Armin Kuster akuster@pacbell.net
+ *
+ *          Additional support and port to 2.6 LDM/sysfs by
+ *          Matt Porter <mporter@kernel.crashing.org>
+ *          Copyright 2004 MontaVista Software, Inc.
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  OCP (On Chip Peripheral) is a software emulated "bus" with a
+ *  pseudo discovery method for dumb peripherals. Usually these type
+ *  of peripherals are found on embedded SoC (System On a Chip)
+ *  processors or highly integrated system controllers that have
+ *  a host bridge and many peripherals.  Common examples where
+ *  this is already used include the PPC4xx, PPC85xx, MPC52xx,
+ *  and MV64xxx parts.
+ *
+ *  This subsystem creates a standard OCP bus type within the
+ *  device model.  The devices on the OCP bus are seeded by an
+ *  an initial OCP device array created by the arch-specific
+ *  Device entries can be added/removed/modified through OCP
+ *  helper functions to accomodate system and  board-specific
+ *  parameters commonly found in embedded systems. OCP also
+ *  provides a standard method for devices to describe extended
+ *  attributes about themselves to the system.  A standard access
+ *  method allows OCP drivers to obtain the information, both
+ *  SoC-specific and system/board-specific, needed for operation.
+ */
+
+#include <linux/module.h>
+#include <linux/config.h>
+#include <linux/list.h>
+#include <linux/miscdevice.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/pm.h>
+#include <linux/bootmem.h>
+#include <linux/device.h>
+
+#include <asm/io.h>
+#include <asm/ocp.h>
+#include <asm/errno.h>
+#include <asm/rwsem.h>
+#include <asm/semaphore.h>
+
+//#define DBG(x)	printk x
+#define DBG(x)
+
+extern int mem_init_done;
+
+extern struct ocp_def core_ocp[];	/* Static list of devices, provided by
+					   CPU core */
+
+LIST_HEAD(ocp_devices);			/* List of all OCP devices */
+DECLARE_RWSEM(ocp_devices_sem);		/* Global semaphores for those lists */
+
+static int ocp_inited;
+
+/* Sysfs support */
+#define OCP_DEF_ATTR(field, format_string)				\
+static ssize_t								\
+show_##field(struct device *dev, char *buf)				\
+{									\
+	struct ocp_device *odev = to_ocp_dev(dev);			\
+									\
+	return sprintf(buf, format_string, odev->def->field);		\
+}									\
+static DEVICE_ATTR(field, S_IRUGO, show_##field, NULL);
+
+OCP_DEF_ATTR(vendor, "0x%04x\n");
+OCP_DEF_ATTR(function, "0x%04x\n");
+OCP_DEF_ATTR(index, "0x%04x\n");
+#ifdef CONFIG_PTE_64BIT
+OCP_DEF_ATTR(paddr, "0x%016Lx\n");
+#else
+OCP_DEF_ATTR(paddr, "0x%08lx\n");
+#endif
+OCP_DEF_ATTR(irq, "%d\n");
+OCP_DEF_ATTR(pm, "%lu\n");
+
+void ocp_create_sysfs_dev_files(struct ocp_device *odev)
+{
+	struct device *dev = &odev->dev;
+
+	/* Current OCP device def attributes */
+	device_create_file(dev, &dev_attr_vendor);
+	device_create_file(dev, &dev_attr_function);
+	device_create_file(dev, &dev_attr_index);
+	device_create_file(dev, &dev_attr_paddr);
+	device_create_file(dev, &dev_attr_irq);
+	device_create_file(dev, &dev_attr_pm);
+	/* Current OCP device additions attributes */
+	if (odev->def->additions && odev->def->show)
+		odev->def->show(dev);
+}
+
+/**
+ *	ocp_device_match	-	Match one driver to one device
+ *	@drv: driver to match
+ *	@dev: device to match
+ *
+ *	This function returns 0 if the driver and device don't match
+ */
+static int
+ocp_device_match(struct device *dev, struct device_driver *drv)
+{
+	struct ocp_device *ocp_dev = to_ocp_dev(dev);
+	struct ocp_driver *ocp_drv = to_ocp_drv(drv);
+	const struct ocp_device_id *ids = ocp_drv->id_table;
+
+	if (!ids)
+		return 0;
+
+	while (ids->vendor || ids->function) {
+		if ((ids->vendor == OCP_ANY_ID
+		     || ids->vendor == ocp_dev->def->vendor)
+		    && (ids->function == OCP_ANY_ID
+			|| ids->function == ocp_dev->def->function))
+		        return 1;
+		ids++;
+	}
+	return 0;
+}
+
+static int
+ocp_device_probe(struct device *dev)
+{
+	int error = 0;
+	struct ocp_driver *drv;
+	struct ocp_device *ocp_dev;
+
+	drv = to_ocp_drv(dev->driver);
+	ocp_dev = to_ocp_dev(dev);
+
+	if (drv->probe) {
+		error = drv->probe(ocp_dev);
+		if (error >= 0) {
+			ocp_dev->driver = drv;
+			error = 0;
+		}
+	}
+	return error;
+}
+
+static int
+ocp_device_remove(struct device *dev)
+{
+	struct ocp_device *ocp_dev = to_ocp_dev(dev);
+
+	if (ocp_dev->driver) {
+		if (ocp_dev->driver->remove)
+			ocp_dev->driver->remove(ocp_dev);
+		ocp_dev->driver = NULL;
+	}
+	return 0;
+}
+
+static int
+ocp_device_suspend(struct device *dev, u32 state)
+{
+	struct ocp_device *ocp_dev = to_ocp_dev(dev);
+	struct ocp_driver *ocp_drv = to_ocp_drv(dev->driver);
+
+	if (dev->driver && ocp_drv->suspend)
+		return ocp_drv->suspend(ocp_dev, state);
+	return 0;
+}
+
+static int
+ocp_device_resume(struct device *dev)
+{
+	struct ocp_device *ocp_dev = to_ocp_dev(dev);
+	struct ocp_driver *ocp_drv = to_ocp_drv(dev->driver);
+
+	if (dev->driver && ocp_drv->resume)
+		return ocp_drv->resume(ocp_dev);
+	return 0;
+}
+
+struct bus_type ocp_bus_type = {
+	.name = "ocp",
+	.match = ocp_device_match,
+	.suspend = ocp_device_suspend,
+	.resume = ocp_device_resume,
+};
+
+/**
+ *	ocp_register_driver	-	Register an OCP driver
+ *	@drv: pointer to statically defined ocp_driver structure
+ *
+ *	The driver's probe() callback is called either recursively
+ *	by this function or upon later call of ocp_driver_init
+ *
+ *	NOTE: Detection of devices is a 2 pass step on this implementation,
+ *	hotswap isn't supported. First, all OCP devices are put in the device
+ *	list, _then_ all drivers are probed on each match.
+ */
+int
+ocp_register_driver(struct ocp_driver *drv)
+{
+	/* initialize common driver fields */
+	drv->driver.name = drv->name;
+	drv->driver.bus = &ocp_bus_type;
+	drv->driver.probe = ocp_device_probe;
+	drv->driver.remove = ocp_device_remove;
+
+	/* register with core */
+	return driver_register(&drv->driver);
+}
+
+/**
+ *	ocp_unregister_driver	-	Unregister an OCP driver
+ *	@drv: pointer to statically defined ocp_driver structure
+ *
+ *	The driver's remove() callback is called recursively
+ *	by this function for any device already registered
+ */
+void
+ocp_unregister_driver(struct ocp_driver *drv)
+{
+	DBG(("ocp: ocp_unregister_driver(%s)...\n", drv->name));
+
+	driver_unregister(&drv->driver);
+
+	DBG(("ocp: ocp_unregister_driver(%s)... done.\n", drv->name));
+}
+
+/* Core of ocp_find_device(). Caller must hold ocp_devices_sem */
+static struct ocp_device *
+__ocp_find_device(unsigned int vendor, unsigned int function, int index)
+{
+	struct list_head	*entry;
+	struct ocp_device	*dev, *found = NULL;
+
+	DBG(("ocp: __ocp_find_device(vendor: %x, function: %x, index: %d)...\n", vendor, function, index));
+
+	list_for_each(entry, &ocp_devices) {
+		dev = list_entry(entry, struct ocp_device, link);
+		if (vendor != OCP_ANY_ID && vendor != dev->def->vendor)
+			continue;
+		if (function != OCP_ANY_ID && function != dev->def->function)
+			continue;
+		if (index != OCP_ANY_INDEX && index != dev->def->index)
+			continue;
+		found = dev;
+		break;
+	}
+
+	DBG(("ocp: __ocp_find_device(vendor: %x, function: %x, index: %d)... done\n", vendor, function, index));
+
+	return found;
+}
+
+/**
+ *	ocp_find_device	-	Find a device by function & index
+ *      @vendor: vendor ID of the device (or OCP_ANY_ID)
+ *	@function: function code of the device (or OCP_ANY_ID)
+ *	@idx: index of the device (or OCP_ANY_INDEX)
+ *
+ *	This function allows a lookup of a given function by it's
+ *	index, it's typically used to find the MAL or ZMII associated
+ *	with an EMAC or similar horrors.
+ *      You can pass vendor, though you usually want OCP_ANY_ID there...
+ */
+struct ocp_device *
+ocp_find_device(unsigned int vendor, unsigned int function, int index)
+{
+	struct ocp_device	*dev;
+
+	down_read(&ocp_devices_sem);
+	dev = __ocp_find_device(vendor, function, index);
+	up_read(&ocp_devices_sem);
+
+	return dev;
+}
+
+/**
+ *	ocp_get_one_device -	Find a def by function & index
+ *      @vendor: vendor ID of the device (or OCP_ANY_ID)
+ *	@function: function code of the device (or OCP_ANY_ID)
+ *	@idx: index of the device (or OCP_ANY_INDEX)
+ *
+ *	This function allows a lookup of a given ocp_def by it's
+ *	vendor, function, and index.  The main purpose for is to
+ *	allow modification of the def before binding to the driver
+ */
+struct ocp_def *
+ocp_get_one_device(unsigned int vendor, unsigned int function, int index)
+{
+	struct ocp_device	*dev;
+	struct ocp_def		*found = NULL;
+
+	DBG(("ocp: ocp_get_one_device(vendor: %x, function: %x, index: %d)...\n",
+		vendor, function, index));
+
+	dev = ocp_find_device(vendor, function, index);
+
+	if (dev)
+		found = dev->def;
+
+	DBG(("ocp: ocp_get_one_device(vendor: %x, function: %x, index: %d)... done.\n",
+		vendor, function, index));
+
+	return found;
+}
+
+/**
+ *	ocp_add_one_device	-	Add a device
+ *	@def: static device definition structure
+ *
+ *	This function adds a device definition to the
+ *	device list. It may only be called before
+ *	ocp_driver_init() and will return an error
+ *	otherwise.
+ */
+int
+ocp_add_one_device(struct ocp_def *def)
+{
+	struct	ocp_device	*dev;
+
+	DBG(("ocp: ocp_add_one_device()...\n"));
+
+	/* Can't be called after ocp driver init */
+	if (ocp_inited)
+		return 1;
+
+	if (mem_init_done)
+		dev = kmalloc(sizeof(*dev), GFP_KERNEL);
+	else
+		dev = alloc_bootmem(sizeof(*dev));
+
+	if (dev == NULL)
+		return 1;
+	memset(dev, 0, sizeof(*dev));
+	dev->def = def;
+	dev->current_state = 4;
+	sprintf(dev->name, "OCP device %04x:%04x:%04x",
+		dev->def->vendor, dev->def->function, dev->def->index);
+	down_write(&ocp_devices_sem);
+	list_add_tail(&dev->link, &ocp_devices);
+	up_write(&ocp_devices_sem);
+
+	DBG(("ocp: ocp_add_one_device()...done\n"));
+
+	return 0;
+}
+
+/**
+ *	ocp_remove_one_device -	Remove a device by function & index
+ *      @vendor: vendor ID of the device (or OCP_ANY_ID)
+ *	@function: function code of the device (or OCP_ANY_ID)
+ *	@idx: index of the device (or OCP_ANY_INDEX)
+ *
+ *	This function allows removal of a given function by its
+ *	index. It may only be called before ocp_driver_init()
+ *	and will return an error otherwise.
+ */
+int
+ocp_remove_one_device(unsigned int vendor, unsigned int function, int index)
+{
+	struct ocp_device *dev;
+
+	DBG(("ocp: ocp_remove_one_device(vendor: %x, function: %x, index: %d)...\n", vendor, function, index));
+
+	/* Can't be called after ocp driver init */
+	if (ocp_inited)
+		return 1;
+
+	down_write(&ocp_devices_sem);
+	dev = __ocp_find_device(vendor, function, index);
+	list_del((struct list_head *)dev);
+	up_write(&ocp_devices_sem);
+
+	DBG(("ocp: ocp_remove_one_device(vendor: %x, function: %x, index: %d)... done.\n", vendor, function, index));
+
+	return 0;
+}
+
+/**
+ *	ocp_for_each_device	-	Iterate over OCP devices
+ *	@callback: routine to execute for each ocp device.
+ *	@arg: user data to be passed to callback routine.
+ *
+ *	This routine holds the ocp_device semaphore, so the
+ *	callback routine cannot modify the ocp_device list.
+ */
+void
+ocp_for_each_device(void(*callback)(struct ocp_device *, void *arg), void *arg)
+{
+	struct list_head *entry;
+
+	if (callback) {
+		down_read(&ocp_devices_sem);
+		list_for_each(entry, &ocp_devices)
+			callback(list_entry(entry, struct ocp_device, link),
+				arg);
+		up_read(&ocp_devices_sem);
+	}
+}
+
+/**
+ *	ocp_early_init	-	Init OCP device management
+ *
+ *	This function builds the list of devices before setup_arch.
+ *	This allows platform code to modify the device lists before
+ *	they are bound to drivers (changes to paddr, removing devices
+ *	etc)
+ */
+int __init
+ocp_early_init(void)
+{
+	struct ocp_def	*def;
+
+	DBG(("ocp: ocp_early_init()...\n"));
+
+	/* Fill the devices list */
+	for (def = core_ocp; def->vendor != OCP_VENDOR_INVALID; def++)
+		ocp_add_one_device(def);
+
+	DBG(("ocp: ocp_early_init()... done.\n"));
+
+	return 0;
+}
+
+/**
+ *	ocp_driver_init	-	Init OCP device management
+ *
+ *	This function is meant to be called via OCP bus registration.
+ */
+static int __init
+ocp_driver_init(void)
+{
+	int ret = 0, index = 0;
+	struct device *ocp_bus;
+	struct list_head *entry;
+	struct ocp_device *dev;
+
+	if (ocp_inited)
+		return ret;
+	ocp_inited = 1;
+
+	DBG(("ocp: ocp_driver_init()...\n"));
+
+	/* Allocate/register primary OCP bus */
+	ocp_bus = kmalloc(sizeof(struct device), GFP_KERNEL);
+	if (ocp_bus == NULL)
+		return 1;
+	memset(ocp_bus, 0, sizeof(struct device));
+	strcpy(ocp_bus->bus_id, "ocp");
+
+	bus_register(&ocp_bus_type);
+
+	device_register(ocp_bus);
+
+	/* Put each OCP device into global device list */
+	list_for_each(entry, &ocp_devices) {
+		dev = list_entry(entry, struct ocp_device, link);
+		sprintf(dev->dev.bus_id, "%2.2x", index);
+		dev->dev.parent = ocp_bus;
+		dev->dev.bus = &ocp_bus_type;
+		device_register(&dev->dev);
+		ocp_create_sysfs_dev_files(dev);
+		index++;
+	}
+
+	DBG(("ocp: ocp_driver_init()... done.\n"));
+
+	return 0;
+}
+
+postcore_initcall(ocp_driver_init);
+
+EXPORT_SYMBOL(ocp_bus_type);
+EXPORT_SYMBOL(ocp_find_device);
+EXPORT_SYMBOL(ocp_register_driver);
+EXPORT_SYMBOL(ocp_unregister_driver);
diff --git a/arch/ppc/syslib/of_device.c b/arch/ppc/syslib/of_device.c
new file mode 100644
index 000000000000..46269ed21aee
--- /dev/null
+++ b/arch/ppc/syslib/of_device.c
@@ -0,0 +1,273 @@
+#include <linux/config.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <asm/errno.h>
+#include <asm/of_device.h>
+
+/**
+ * of_match_device - Tell if an of_device structure has a matching
+ * of_match structure
+ * @ids: array of of device match structures to search in
+ * @dev: the of device structure to match against
+ *
+ * Used by a driver to check whether an of_device present in the
+ * system is in its list of supported devices.
+ */
+const struct of_match * of_match_device(const struct of_match *matches,
+					const struct of_device *dev)
+{
+	if (!dev->node)
+		return NULL;
+	while (matches->name || matches->type || matches->compatible) {
+		int match = 1;
+		if (matches->name && matches->name != OF_ANY_MATCH)
+			match &= dev->node->name
+				&& !strcmp(matches->name, dev->node->name);
+		if (matches->type && matches->type != OF_ANY_MATCH)
+			match &= dev->node->type
+				&& !strcmp(matches->type, dev->node->type);
+		if (matches->compatible && matches->compatible != OF_ANY_MATCH)
+			match &= device_is_compatible(dev->node,
+				matches->compatible);
+		if (match)
+			return matches;
+		matches++;
+	}
+	return NULL;
+}
+
+static int of_platform_bus_match(struct device *dev, struct device_driver *drv)
+{
+	struct of_device * of_dev = to_of_device(dev);
+	struct of_platform_driver * of_drv = to_of_platform_driver(drv);
+	const struct of_match * matches = of_drv->match_table;
+
+	if (!matches)
+		return 0;
+
+	return of_match_device(matches, of_dev) != NULL;
+}
+
+struct of_device *of_dev_get(struct of_device *dev)
+{
+	struct device *tmp;
+
+	if (!dev)
+		return NULL;
+	tmp = get_device(&dev->dev);
+	if (tmp)
+		return to_of_device(tmp);
+	else
+		return NULL;
+}
+
+void of_dev_put(struct of_device *dev)
+{
+	if (dev)
+		put_device(&dev->dev);
+}
+
+
+static int of_device_probe(struct device *dev)
+{
+	int error = -ENODEV;
+	struct of_platform_driver *drv;
+	struct of_device *of_dev;
+	const struct of_match *match;
+
+	drv = to_of_platform_driver(dev->driver);
+	of_dev = to_of_device(dev);
+
+	if (!drv->probe)
+		return error;
+
+	of_dev_get(of_dev);
+
+	match = of_match_device(drv->match_table, of_dev);
+	if (match)
+		error = drv->probe(of_dev, match);
+	if (error)
+		of_dev_put(of_dev);
+
+	return error;
+}
+
+static int of_device_remove(struct device *dev)
+{
+	struct of_device * of_dev = to_of_device(dev);
+	struct of_platform_driver * drv = to_of_platform_driver(dev->driver);
+
+	if (dev->driver && drv->remove)
+		drv->remove(of_dev);
+	return 0;
+}
+
+static int of_device_suspend(struct device *dev, u32 state)
+{
+	struct of_device * of_dev = to_of_device(dev);
+	struct of_platform_driver * drv = to_of_platform_driver(dev->driver);
+	int error = 0;
+
+	if (dev->driver && drv->suspend)
+		error = drv->suspend(of_dev, state);
+	return error;
+}
+
+static int of_device_resume(struct device * dev)
+{
+	struct of_device * of_dev = to_of_device(dev);
+	struct of_platform_driver * drv = to_of_platform_driver(dev->driver);
+	int error = 0;
+
+	if (dev->driver && drv->resume)
+		error = drv->resume(of_dev);
+	return error;
+}
+
+struct bus_type of_platform_bus_type = {
+       .name	= "of_platform",
+       .match	= of_platform_bus_match,
+       .suspend	= of_device_suspend,
+       .resume	= of_device_resume,
+};
+
+static int __init of_bus_driver_init(void)
+{
+	return bus_register(&of_platform_bus_type);
+}
+
+postcore_initcall(of_bus_driver_init);
+
+int of_register_driver(struct of_platform_driver *drv)
+{
+	int count = 0;
+
+	/* initialize common driver fields */
+	drv->driver.name = drv->name;
+	drv->driver.bus = &of_platform_bus_type;
+	drv->driver.probe = of_device_probe;
+	drv->driver.remove = of_device_remove;
+
+	/* register with core */
+	count = driver_register(&drv->driver);
+	return count ? count : 1;
+}
+
+void of_unregister_driver(struct of_platform_driver *drv)
+{
+	driver_unregister(&drv->driver);
+}
+
+
+static ssize_t dev_show_devspec(struct device *dev, char *buf)
+{
+	struct of_device *ofdev;
+
+	ofdev = to_of_device(dev);
+	return sprintf(buf, "%s", ofdev->node->full_name);
+}
+
+static DEVICE_ATTR(devspec, S_IRUGO, dev_show_devspec, NULL);
+
+/**
+ * of_release_dev - free an of device structure when all users of it are finished.
+ * @dev: device that's been disconnected
+ *
+ * Will be called only by the device core when all users of this of device are
+ * done.
+ */
+void of_release_dev(struct device *dev)
+{
+	struct of_device *ofdev;
+
+        ofdev = to_of_device(dev);
+	of_node_put(ofdev->node);
+	kfree(ofdev);
+}
+
+int of_device_register(struct of_device *ofdev)
+{
+	int rc;
+	struct of_device **odprop;
+
+	BUG_ON(ofdev->node == NULL);
+
+	odprop = (struct of_device **)get_property(ofdev->node, "linux,device", NULL);
+	if (!odprop) {
+		struct property *new_prop;
+	
+		new_prop = kmalloc(sizeof(struct property) + sizeof(struct of_device *),
+			GFP_KERNEL);
+		if (new_prop == NULL)
+			return -ENOMEM;
+		new_prop->name = "linux,device";
+		new_prop->length = sizeof(sizeof(struct of_device *));
+		new_prop->value = (unsigned char *)&new_prop[1];
+		odprop = (struct of_device **)new_prop->value;
+		*odprop = NULL;
+		prom_add_property(ofdev->node, new_prop);
+	}
+	*odprop = ofdev;
+
+	rc = device_register(&ofdev->dev);
+	if (rc)
+		return rc;
+
+	device_create_file(&ofdev->dev, &dev_attr_devspec);
+
+	return 0;
+}
+
+void of_device_unregister(struct of_device *ofdev)
+{
+	struct of_device **odprop;
+
+	device_remove_file(&ofdev->dev, &dev_attr_devspec);
+
+	odprop = (struct of_device **)get_property(ofdev->node, "linux,device", NULL);
+	if (odprop)
+		*odprop = NULL;
+
+	device_unregister(&ofdev->dev);
+}
+
+struct of_device* of_platform_device_create(struct device_node *np, const char *bus_id)
+{
+	struct of_device *dev;
+	u32 *reg;
+
+	dev = kmalloc(sizeof(*dev), GFP_KERNEL);
+	if (!dev)
+		return NULL;
+	memset(dev, 0, sizeof(*dev));
+
+	dev->node = of_node_get(np);
+	dev->dma_mask = 0xffffffffUL;
+	dev->dev.dma_mask = &dev->dma_mask;
+	dev->dev.parent = NULL;
+	dev->dev.bus = &of_platform_bus_type;
+	dev->dev.release = of_release_dev;
+
+	reg = (u32 *)get_property(np, "reg", NULL);
+	strlcpy(dev->dev.bus_id, bus_id, BUS_ID_SIZE);
+
+	if (of_device_register(dev) != 0) {
+		kfree(dev);
+		return NULL;
+	}
+
+	return dev;
+}
+
+EXPORT_SYMBOL(of_match_device);
+EXPORT_SYMBOL(of_platform_bus_type);
+EXPORT_SYMBOL(of_register_driver);
+EXPORT_SYMBOL(of_unregister_driver);
+EXPORT_SYMBOL(of_device_register);
+EXPORT_SYMBOL(of_device_unregister);
+EXPORT_SYMBOL(of_dev_get);
+EXPORT_SYMBOL(of_dev_put);
+EXPORT_SYMBOL(of_platform_device_create);
+EXPORT_SYMBOL(of_release_dev);
diff --git a/arch/ppc/syslib/open_pic.c b/arch/ppc/syslib/open_pic.c
new file mode 100644
index 000000000000..406f36a8a681
--- /dev/null
+++ b/arch/ppc/syslib/open_pic.c
@@ -0,0 +1,1083 @@
+/*
+ *  arch/ppc/kernel/open_pic.c -- OpenPIC Interrupt Handling
+ *
+ *  Copyright (C) 1997 Geert Uytterhoeven
+ *
+ *  This file is subject to the terms and conditions of the GNU General Public
+ *  License.  See the file COPYING in the main directory of this archive
+ *  for more details.
+ */
+
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/sysdev.h>
+#include <linux/errno.h>
+#include <asm/ptrace.h>
+#include <asm/signal.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/prom.h>
+#include <asm/sections.h>
+#include <asm/open_pic.h>
+#include <asm/i8259.h>
+
+#include "open_pic_defs.h"
+
+#if defined(CONFIG_PRPMC800) || defined(CONFIG_85xx)
+#define OPENPIC_BIG_ENDIAN
+#endif
+
+void __iomem *OpenPIC_Addr;
+static volatile struct OpenPIC __iomem *OpenPIC = NULL;
+
+/*
+ * We define OpenPIC_InitSenses table thusly:
+ * bit 0x1: sense, 0 for edge and 1 for level.
+ * bit 0x2: polarity, 0 for negative, 1 for positive.
+ */
+u_int OpenPIC_NumInitSenses __initdata = 0;
+u_char *OpenPIC_InitSenses __initdata = NULL;
+extern int use_of_interrupt_tree;
+
+static u_int NumProcessors;
+static u_int NumSources;
+static int open_pic_irq_offset;
+static volatile OpenPIC_Source __iomem *ISR[NR_IRQS];
+static int openpic_cascade_irq = -1;
+static int (*openpic_cascade_fn)(struct pt_regs *);
+
+/* Global Operations */
+static void openpic_disable_8259_pass_through(void);
+static void openpic_set_spurious(u_int vector);
+
+#ifdef CONFIG_SMP
+/* Interprocessor Interrupts */
+static void openpic_initipi(u_int ipi, u_int pri, u_int vector);
+static irqreturn_t openpic_ipi_action(int cpl, void *dev_id, struct pt_regs *);
+#endif
+
+/* Timer Interrupts */
+static void openpic_inittimer(u_int timer, u_int pri, u_int vector);
+static void openpic_maptimer(u_int timer, cpumask_t cpumask);
+
+/* Interrupt Sources */
+static void openpic_enable_irq(u_int irq);
+static void openpic_disable_irq(u_int irq);
+static void openpic_initirq(u_int irq, u_int pri, u_int vector, int polarity,
+			    int is_level);
+static void openpic_mapirq(u_int irq, cpumask_t cpumask, cpumask_t keepmask);
+
+/*
+ * These functions are not used but the code is kept here
+ * for completeness and future reference.
+ */
+#ifdef notused
+static void openpic_enable_8259_pass_through(void);
+static u_int openpic_get_priority(void);
+static u_int openpic_get_spurious(void);
+static void openpic_set_sense(u_int irq, int sense);
+#endif /* notused */
+
+/*
+ * Description of the openpic for the higher-level irq code
+ */
+static void openpic_end_irq(unsigned int irq_nr);
+static void openpic_ack_irq(unsigned int irq_nr);
+static void openpic_set_affinity(unsigned int irq_nr, cpumask_t cpumask);
+
+struct hw_interrupt_type open_pic = {
+	.typename	= " OpenPIC  ",
+	.enable		= openpic_enable_irq,
+	.disable	= openpic_disable_irq,
+	.ack		= openpic_ack_irq,
+	.end		= openpic_end_irq,
+	.set_affinity	= openpic_set_affinity,
+};
+
+#ifdef CONFIG_SMP
+static void openpic_end_ipi(unsigned int irq_nr);
+static void openpic_ack_ipi(unsigned int irq_nr);
+static void openpic_enable_ipi(unsigned int irq_nr);
+static void openpic_disable_ipi(unsigned int irq_nr);
+
+struct hw_interrupt_type open_pic_ipi = {
+	.typename	= " OpenPIC  ",
+	.enable		= openpic_enable_ipi,
+	.disable	= openpic_disable_ipi,
+	.ack		= openpic_ack_ipi,
+	.end		= openpic_end_ipi,
+};
+#endif /* CONFIG_SMP */
+
+/*
+ *  Accesses to the current processor's openpic registers
+ */
+#ifdef CONFIG_SMP
+#define THIS_CPU		Processor[cpu]
+#define DECL_THIS_CPU		int cpu = smp_hw_index[smp_processor_id()]
+#define CHECK_THIS_CPU		check_arg_cpu(cpu)
+#else
+#define THIS_CPU		Processor[0]
+#define DECL_THIS_CPU
+#define CHECK_THIS_CPU
+#endif /* CONFIG_SMP */
+
+#if 1
+#define check_arg_ipi(ipi) \
+    if (ipi < 0 || ipi >= OPENPIC_NUM_IPI) \
+	printk("open_pic.c:%d: invalid ipi %d\n", __LINE__, ipi);
+#define check_arg_timer(timer) \
+    if (timer < 0 || timer >= OPENPIC_NUM_TIMERS) \
+	printk("open_pic.c:%d: invalid timer %d\n", __LINE__, timer);
+#define check_arg_vec(vec) \
+    if (vec < 0 || vec >= OPENPIC_NUM_VECTORS) \
+	printk("open_pic.c:%d: invalid vector %d\n", __LINE__, vec);
+#define check_arg_pri(pri) \
+    if (pri < 0 || pri >= OPENPIC_NUM_PRI) \
+	printk("open_pic.c:%d: invalid priority %d\n", __LINE__, pri);
+/*
+ * Print out a backtrace if it's out of range, since if it's larger than NR_IRQ's
+ * data has probably been corrupted and we're going to panic or deadlock later
+ * anyway --Troy
+ */
+#define check_arg_irq(irq) \
+    if (irq < open_pic_irq_offset || irq >= NumSources+open_pic_irq_offset \
+	|| ISR[irq - open_pic_irq_offset] == 0) { \
+      printk("open_pic.c:%d: invalid irq %d\n", __LINE__, irq); \
+      dump_stack(); }
+#define check_arg_cpu(cpu) \
+    if (cpu < 0 || cpu >= NumProcessors){ \
+	printk("open_pic.c:%d: invalid cpu %d\n", __LINE__, cpu); \
+	dump_stack(); }
+#else
+#define check_arg_ipi(ipi)	do {} while (0)
+#define check_arg_timer(timer)	do {} while (0)
+#define check_arg_vec(vec)	do {} while (0)
+#define check_arg_pri(pri)	do {} while (0)
+#define check_arg_irq(irq)	do {} while (0)
+#define check_arg_cpu(cpu)	do {} while (0)
+#endif
+
+u_int openpic_read(volatile u_int __iomem *addr)
+{
+	u_int val;
+
+#ifdef OPENPIC_BIG_ENDIAN
+	val = in_be32(addr);
+#else
+	val = in_le32(addr);
+#endif
+	return val;
+}
+
+static inline void openpic_write(volatile u_int __iomem *addr, u_int val)
+{
+#ifdef OPENPIC_BIG_ENDIAN
+	out_be32(addr, val);
+#else
+	out_le32(addr, val);
+#endif
+}
+
+static inline u_int openpic_readfield(volatile u_int __iomem *addr, u_int mask)
+{
+	u_int val = openpic_read(addr);
+	return val & mask;
+}
+
+inline void openpic_writefield(volatile u_int __iomem *addr, u_int mask,
+			       u_int field)
+{
+	u_int val = openpic_read(addr);
+	openpic_write(addr, (val & ~mask) | (field & mask));
+}
+
+static inline void openpic_clearfield(volatile u_int __iomem *addr, u_int mask)
+{
+	openpic_writefield(addr, mask, 0);
+}
+
+static inline void openpic_setfield(volatile u_int __iomem *addr, u_int mask)
+{
+	openpic_writefield(addr, mask, mask);
+}
+
+static void openpic_safe_writefield(volatile u_int __iomem *addr, u_int mask,
+				    u_int field)
+{
+	openpic_setfield(addr, OPENPIC_MASK);
+	while (openpic_read(addr) & OPENPIC_ACTIVITY);
+	openpic_writefield(addr, mask | OPENPIC_MASK, field | OPENPIC_MASK);
+}
+
+#ifdef CONFIG_SMP
+/* yes this is right ... bug, feature, you decide! -- tgall */
+u_int openpic_read_IPI(volatile u_int __iomem * addr)
+{
+         u_int val = 0;
+#if defined(OPENPIC_BIG_ENDIAN) || defined(CONFIG_POWER3)
+        val = in_be32(addr);
+#else
+        val = in_le32(addr);
+#endif
+        return val;
+}
+
+/* because of the power3 be / le above, this is needed */
+inline void openpic_writefield_IPI(volatile u_int __iomem * addr, u_int mask, u_int field)
+{
+        u_int  val = openpic_read_IPI(addr);
+        openpic_write(addr, (val & ~mask) | (field & mask));
+}
+
+static inline void openpic_clearfield_IPI(volatile u_int __iomem *addr, u_int mask)
+{
+        openpic_writefield_IPI(addr, mask, 0);
+}
+
+static inline void openpic_setfield_IPI(volatile u_int __iomem *addr, u_int mask)
+{
+        openpic_writefield_IPI(addr, mask, mask);
+}
+
+static void openpic_safe_writefield_IPI(volatile u_int __iomem *addr, u_int mask, u_int field)
+{
+        openpic_setfield_IPI(addr, OPENPIC_MASK);
+
+        /* wait until it's not in use */
+        /* BenH: Is this code really enough ? I would rather check the result
+         *       and eventually retry ...
+         */
+        while(openpic_read_IPI(addr) & OPENPIC_ACTIVITY);
+
+        openpic_writefield_IPI(addr, mask | OPENPIC_MASK, field | OPENPIC_MASK);
+}
+#endif /* CONFIG_SMP */
+
+#ifdef CONFIG_EPIC_SERIAL_MODE
+/* On platforms that may use EPIC serial mode, the default is enabled. */
+int epic_serial_mode = 1;
+
+static void __init openpic_eicr_set_clk(u_int clkval)
+{
+	openpic_writefield(&OpenPIC->Global.Global_Configuration1,
+			OPENPIC_EICR_S_CLK_MASK, (clkval << 28));
+}
+
+static void __init openpic_enable_sie(void)
+{
+	openpic_setfield(&OpenPIC->Global.Global_Configuration1,
+			OPENPIC_EICR_SIE);
+}
+#endif
+
+#if defined(CONFIG_EPIC_SERIAL_MODE) || defined(CONFIG_PM)
+static void openpic_reset(void)
+{
+	openpic_setfield(&OpenPIC->Global.Global_Configuration0,
+			 OPENPIC_CONFIG_RESET);
+	while (openpic_readfield(&OpenPIC->Global.Global_Configuration0,
+				 OPENPIC_CONFIG_RESET))
+		mb();
+}
+#endif
+
+void __init openpic_set_sources(int first_irq, int num_irqs, void __iomem *first_ISR)
+{
+	volatile OpenPIC_Source __iomem *src = first_ISR;
+	int i, last_irq;
+
+	last_irq = first_irq + num_irqs;
+	if (last_irq > NumSources)
+		NumSources = last_irq;
+	if (src == 0)
+		src = &((struct OpenPIC __iomem *)OpenPIC_Addr)->Source[first_irq];
+	for (i = first_irq; i < last_irq; ++i, ++src)
+		ISR[i] = src;
+}
+
+/*
+ * The `offset' parameter defines where the interrupts handled by the
+ * OpenPIC start in the space of interrupt numbers that the kernel knows
+ * about.  In other words, the OpenPIC's IRQ0 is numbered `offset' in the
+ * kernel's interrupt numbering scheme.
+ * We assume there is only one OpenPIC.
+ */
+void __init openpic_init(int offset)
+{
+	u_int t, i;
+	u_int timerfreq;
+	const char *version;
+
+	if (!OpenPIC_Addr) {
+		printk("No OpenPIC found !\n");
+		return;
+	}
+	OpenPIC = (volatile struct OpenPIC __iomem *)OpenPIC_Addr;
+
+#ifdef CONFIG_EPIC_SERIAL_MODE
+	/* Have to start from ground zero.
+	*/
+	openpic_reset();
+#endif
+
+	if (ppc_md.progress) ppc_md.progress("openpic: enter", 0x122);
+
+	t = openpic_read(&OpenPIC->Global.Feature_Reporting0);
+	switch (t & OPENPIC_FEATURE_VERSION_MASK) {
+	case 1:
+		version = "1.0";
+		break;
+	case 2:
+		version = "1.2";
+		break;
+	case 3:
+		version = "1.3";
+		break;
+	default:
+		version = "?";
+		break;
+	}
+	NumProcessors = ((t & OPENPIC_FEATURE_LAST_PROCESSOR_MASK) >>
+			 OPENPIC_FEATURE_LAST_PROCESSOR_SHIFT) + 1;
+	if (NumSources == 0)
+		openpic_set_sources(0,
+				    ((t & OPENPIC_FEATURE_LAST_SOURCE_MASK) >>
+				     OPENPIC_FEATURE_LAST_SOURCE_SHIFT) + 1,
+				    NULL);
+	printk("OpenPIC Version %s (%d CPUs and %d IRQ sources) at %p\n",
+	       version, NumProcessors, NumSources, OpenPIC);
+	timerfreq = openpic_read(&OpenPIC->Global.Timer_Frequency);
+	if (timerfreq)
+		printk("OpenPIC timer frequency is %d.%06d MHz\n",
+		       timerfreq / 1000000, timerfreq % 1000000);
+
+	open_pic_irq_offset = offset;
+
+	/* Initialize timer interrupts */
+	if ( ppc_md.progress ) ppc_md.progress("openpic: timer",0x3ba);
+	for (i = 0; i < OPENPIC_NUM_TIMERS; i++) {
+		/* Disabled, Priority 0 */
+		openpic_inittimer(i, 0, OPENPIC_VEC_TIMER+i+offset);
+		/* No processor */
+		openpic_maptimer(i, CPU_MASK_NONE);
+	}
+
+#ifdef CONFIG_SMP
+	/* Initialize IPI interrupts */
+	if ( ppc_md.progress ) ppc_md.progress("openpic: ipi",0x3bb);
+	for (i = 0; i < OPENPIC_NUM_IPI; i++) {
+		/* Disabled, Priority 10..13 */
+		openpic_initipi(i, 10+i, OPENPIC_VEC_IPI+i+offset);
+		/* IPIs are per-CPU */
+		irq_desc[OPENPIC_VEC_IPI+i+offset].status |= IRQ_PER_CPU;
+		irq_desc[OPENPIC_VEC_IPI+i+offset].handler = &open_pic_ipi;
+	}
+#endif
+
+	/* Initialize external interrupts */
+	if (ppc_md.progress) ppc_md.progress("openpic: external",0x3bc);
+
+	openpic_set_priority(0xf);
+
+	/* Init all external sources, including possibly the cascade. */
+	for (i = 0; i < NumSources; i++) {
+		int sense;
+
+		if (ISR[i] == 0)
+			continue;
+
+		/* the bootloader may have left it enabled (bad !) */
+		openpic_disable_irq(i+offset);
+
+		sense = (i < OpenPIC_NumInitSenses)? OpenPIC_InitSenses[i]: \
+				(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE);
+
+		if (sense & IRQ_SENSE_MASK)
+			irq_desc[i+offset].status = IRQ_LEVEL;
+
+		/* Enabled, Priority 8 */
+		openpic_initirq(i, 8, i+offset, (sense & IRQ_POLARITY_MASK),
+				(sense & IRQ_SENSE_MASK));
+		/* Processor 0 */
+		openpic_mapirq(i, CPU_MASK_CPU0, CPU_MASK_NONE);
+	}
+
+	/* Init descriptors */
+	for (i = offset; i < NumSources + offset; i++)
+		irq_desc[i].handler = &open_pic;
+
+	/* Initialize the spurious interrupt */
+	if (ppc_md.progress) ppc_md.progress("openpic: spurious",0x3bd);
+	openpic_set_spurious(OPENPIC_VEC_SPURIOUS);
+	openpic_disable_8259_pass_through();
+#ifdef CONFIG_EPIC_SERIAL_MODE
+	if (epic_serial_mode) {
+		openpic_eicr_set_clk(7);	/* Slowest value until we know better */
+		openpic_enable_sie();
+	}
+#endif
+	openpic_set_priority(0);
+
+	if (ppc_md.progress) ppc_md.progress("openpic: exit",0x222);
+}
+
+#ifdef notused
+static void openpic_enable_8259_pass_through(void)
+{
+	openpic_clearfield(&OpenPIC->Global.Global_Configuration0,
+			   OPENPIC_CONFIG_8259_PASSTHROUGH_DISABLE);
+}
+#endif /* notused */
+
+static void openpic_disable_8259_pass_through(void)
+{
+	openpic_setfield(&OpenPIC->Global.Global_Configuration0,
+			 OPENPIC_CONFIG_8259_PASSTHROUGH_DISABLE);
+}
+
+/*
+ *  Find out the current interrupt
+ */
+u_int openpic_irq(void)
+{
+	u_int vec;
+	DECL_THIS_CPU;
+
+	CHECK_THIS_CPU;
+	vec = openpic_readfield(&OpenPIC->THIS_CPU.Interrupt_Acknowledge,
+				OPENPIC_VECTOR_MASK);
+	return vec;
+}
+
+void openpic_eoi(void)
+{
+	DECL_THIS_CPU;
+
+	CHECK_THIS_CPU;
+	openpic_write(&OpenPIC->THIS_CPU.EOI, 0);
+	/* Handle PCI write posting */
+	(void)openpic_read(&OpenPIC->THIS_CPU.EOI);
+}
+
+#ifdef notused
+static u_int openpic_get_priority(void)
+{
+	DECL_THIS_CPU;
+
+	CHECK_THIS_CPU;
+	return openpic_readfield(&OpenPIC->THIS_CPU.Current_Task_Priority,
+				 OPENPIC_CURRENT_TASK_PRIORITY_MASK);
+}
+#endif /* notused */
+
+void openpic_set_priority(u_int pri)
+{
+	DECL_THIS_CPU;
+
+	CHECK_THIS_CPU;
+	check_arg_pri(pri);
+	openpic_writefield(&OpenPIC->THIS_CPU.Current_Task_Priority,
+			   OPENPIC_CURRENT_TASK_PRIORITY_MASK, pri);
+}
+
+/*
+ *  Get/set the spurious vector
+ */
+#ifdef notused
+static u_int openpic_get_spurious(void)
+{
+	return openpic_readfield(&OpenPIC->Global.Spurious_Vector,
+				 OPENPIC_VECTOR_MASK);
+}
+#endif /* notused */
+
+static void openpic_set_spurious(u_int vec)
+{
+	check_arg_vec(vec);
+	openpic_writefield(&OpenPIC->Global.Spurious_Vector, OPENPIC_VECTOR_MASK,
+			   vec);
+}
+
+#ifdef CONFIG_SMP
+/*
+ * Convert a cpu mask from logical to physical cpu numbers.
+ */
+static inline cpumask_t physmask(cpumask_t cpumask)
+{
+	int i;
+	cpumask_t mask = CPU_MASK_NONE;
+
+	cpus_and(cpumask, cpu_online_map, cpumask);
+
+	for (i = 0; i < NR_CPUS; i++)
+		if (cpu_isset(i, cpumask))
+			cpu_set(smp_hw_index[i], mask);
+
+	return mask;
+}
+#else
+#define physmask(cpumask)	(cpumask)
+#endif
+
+void openpic_reset_processor_phys(u_int mask)
+{
+	openpic_write(&OpenPIC->Global.Processor_Initialization, mask);
+}
+
+#if defined(CONFIG_SMP) || defined(CONFIG_PM)
+static DEFINE_SPINLOCK(openpic_setup_lock);
+#endif
+
+#ifdef CONFIG_SMP
+/*
+ *  Initialize an interprocessor interrupt (and disable it)
+ *
+ *  ipi: OpenPIC interprocessor interrupt number
+ *  pri: interrupt source priority
+ *  vec: the vector it will produce
+ */
+static void __init openpic_initipi(u_int ipi, u_int pri, u_int vec)
+{
+	check_arg_ipi(ipi);
+	check_arg_pri(pri);
+	check_arg_vec(vec);
+	openpic_safe_writefield_IPI(&OpenPIC->Global.IPI_Vector_Priority(ipi),
+				OPENPIC_PRIORITY_MASK | OPENPIC_VECTOR_MASK,
+				(pri << OPENPIC_PRIORITY_SHIFT) | vec);
+}
+
+/*
+ *  Send an IPI to one or more CPUs
+ *
+ *  Externally called, however, it takes an IPI number (0...OPENPIC_NUM_IPI)
+ *  and not a system-wide interrupt number
+ */
+void openpic_cause_IPI(u_int ipi, cpumask_t cpumask)
+{
+	cpumask_t phys;
+	DECL_THIS_CPU;
+
+	CHECK_THIS_CPU;
+	check_arg_ipi(ipi);
+	phys = physmask(cpumask);
+	openpic_write(&OpenPIC->THIS_CPU.IPI_Dispatch(ipi),
+		      cpus_addr(physmask(cpumask))[0]);
+}
+
+void openpic_request_IPIs(void)
+{
+	int i;
+
+	/*
+	 * Make sure this matches what is defined in smp.c for
+	 * smp_message_{pass|recv}() or what shows up in
+	 * /proc/interrupts will be wrong!!! --Troy */
+
+	if (OpenPIC == NULL)
+		return;
+
+	/* IPIs are marked SA_INTERRUPT as they must run with irqs disabled */
+	request_irq(OPENPIC_VEC_IPI+open_pic_irq_offset,
+		    openpic_ipi_action, SA_INTERRUPT,
+		    "IPI0 (call function)", NULL);
+	request_irq(OPENPIC_VEC_IPI+open_pic_irq_offset+1,
+		    openpic_ipi_action, SA_INTERRUPT,
+		    "IPI1 (reschedule)", NULL);
+	request_irq(OPENPIC_VEC_IPI+open_pic_irq_offset+2,
+		    openpic_ipi_action, SA_INTERRUPT,
+		    "IPI2 (invalidate tlb)", NULL);
+	request_irq(OPENPIC_VEC_IPI+open_pic_irq_offset+3,
+		    openpic_ipi_action, SA_INTERRUPT,
+		    "IPI3 (xmon break)", NULL);
+
+	for ( i = 0; i < OPENPIC_NUM_IPI ; i++ )
+		openpic_enable_ipi(OPENPIC_VEC_IPI+open_pic_irq_offset+i);
+}
+
+/*
+ * Do per-cpu setup for SMP systems.
+ *
+ * Get IPI's working and start taking interrupts.
+ *   -- Cort
+ */
+
+void __devinit do_openpic_setup_cpu(void)
+{
+#ifdef CONFIG_IRQ_ALL_CPUS
+ 	int i;
+	cpumask_t msk = CPU_MASK_NONE;
+#endif
+	spin_lock(&openpic_setup_lock);
+
+#ifdef CONFIG_IRQ_ALL_CPUS
+	cpu_set(smp_hw_index[smp_processor_id()], msk);
+
+ 	/* let the openpic know we want intrs. default affinity
+ 	 * is 0xffffffff until changed via /proc
+ 	 * That's how it's done on x86. If we want it differently, then
+ 	 * we should make sure we also change the default values of irq_affinity
+ 	 * in irq.c.
+ 	 */
+ 	for (i = 0; i < NumSources; i++)
+		openpic_mapirq(i, msk, CPU_MASK_ALL);
+#endif /* CONFIG_IRQ_ALL_CPUS */
+ 	openpic_set_priority(0);
+
+	spin_unlock(&openpic_setup_lock);
+}
+#endif /* CONFIG_SMP */
+
+/*
+ *  Initialize a timer interrupt (and disable it)
+ *
+ *  timer: OpenPIC timer number
+ *  pri: interrupt source priority
+ *  vec: the vector it will produce
+ */
+static void __init openpic_inittimer(u_int timer, u_int pri, u_int vec)
+{
+	check_arg_timer(timer);
+	check_arg_pri(pri);
+	check_arg_vec(vec);
+	openpic_safe_writefield(&OpenPIC->Global.Timer[timer].Vector_Priority,
+				OPENPIC_PRIORITY_MASK | OPENPIC_VECTOR_MASK,
+				(pri << OPENPIC_PRIORITY_SHIFT) | vec);
+}
+
+/*
+ *  Map a timer interrupt to one or more CPUs
+ */
+static void __init openpic_maptimer(u_int timer, cpumask_t cpumask)
+{
+	cpumask_t phys = physmask(cpumask);
+	check_arg_timer(timer);
+	openpic_write(&OpenPIC->Global.Timer[timer].Destination,
+		      cpus_addr(phys)[0]);
+}
+
+/*
+ * Initalize the interrupt source which will generate an NMI.
+ * This raises the interrupt's priority from 8 to 9.
+ *
+ * irq: The logical IRQ which generates an NMI.
+ */
+void __init
+openpic_init_nmi_irq(u_int irq)
+{
+	check_arg_irq(irq);
+	openpic_safe_writefield(&ISR[irq - open_pic_irq_offset]->Vector_Priority,
+				OPENPIC_PRIORITY_MASK,
+				9 << OPENPIC_PRIORITY_SHIFT);
+}
+
+/*
+ *
+ * All functions below take an offset'ed irq argument
+ *
+ */
+
+/*
+ * Hookup a cascade to the OpenPIC.
+ */
+
+static struct irqaction openpic_cascade_irqaction = {
+	.handler = no_action,
+	.flags = SA_INTERRUPT,
+	.mask = CPU_MASK_NONE,
+};
+
+void __init
+openpic_hookup_cascade(u_int irq, char *name,
+	int (*cascade_fn)(struct pt_regs *))
+{
+	openpic_cascade_irq = irq;
+	openpic_cascade_fn = cascade_fn;
+
+	if (setup_irq(irq, &openpic_cascade_irqaction))
+		printk("Unable to get OpenPIC IRQ %d for cascade\n",
+				irq - open_pic_irq_offset);
+}
+
+/*
+ *  Enable/disable an external interrupt source
+ *
+ *  Externally called, irq is an offseted system-wide interrupt number
+ */
+static void openpic_enable_irq(u_int irq)
+{
+	volatile u_int __iomem *vpp;
+
+	check_arg_irq(irq);
+	vpp = &ISR[irq - open_pic_irq_offset]->Vector_Priority;
+	openpic_clearfield(vpp, OPENPIC_MASK);
+	/* make sure mask gets to controller before we return to user */
+	do {
+		mb(); /* sync is probably useless here */
+	} while (openpic_readfield(vpp, OPENPIC_MASK));
+}
+
+static void openpic_disable_irq(u_int irq)
+{
+	volatile u_int __iomem *vpp;
+	u32 vp;
+
+	check_arg_irq(irq);
+	vpp = &ISR[irq - open_pic_irq_offset]->Vector_Priority;
+	openpic_setfield(vpp, OPENPIC_MASK);
+	/* make sure mask gets to controller before we return to user */
+	do {
+		mb();  /* sync is probably useless here */
+		vp = openpic_readfield(vpp, OPENPIC_MASK | OPENPIC_ACTIVITY);
+	} while((vp & OPENPIC_ACTIVITY) && !(vp & OPENPIC_MASK));
+}
+
+#ifdef CONFIG_SMP
+/*
+ *  Enable/disable an IPI interrupt source
+ *
+ *  Externally called, irq is an offseted system-wide interrupt number
+ */
+void openpic_enable_ipi(u_int irq)
+{
+	irq -= (OPENPIC_VEC_IPI+open_pic_irq_offset);
+	check_arg_ipi(irq);
+	openpic_clearfield_IPI(&OpenPIC->Global.IPI_Vector_Priority(irq), OPENPIC_MASK);
+
+}
+
+void openpic_disable_ipi(u_int irq)
+{
+	irq -= (OPENPIC_VEC_IPI+open_pic_irq_offset);
+	check_arg_ipi(irq);
+	openpic_setfield_IPI(&OpenPIC->Global.IPI_Vector_Priority(irq), OPENPIC_MASK);
+}
+#endif
+
+/*
+ *  Initialize an interrupt source (and disable it!)
+ *
+ *  irq: OpenPIC interrupt number
+ *  pri: interrupt source priority
+ *  vec: the vector it will produce
+ *  pol: polarity (1 for positive, 0 for negative)
+ *  sense: 1 for level, 0 for edge
+ */
+static void __init
+openpic_initirq(u_int irq, u_int pri, u_int vec, int pol, int sense)
+{
+	openpic_safe_writefield(&ISR[irq]->Vector_Priority,
+				OPENPIC_PRIORITY_MASK | OPENPIC_VECTOR_MASK |
+				OPENPIC_SENSE_MASK | OPENPIC_POLARITY_MASK,
+				(pri << OPENPIC_PRIORITY_SHIFT) | vec |
+				(pol ? OPENPIC_POLARITY_POSITIVE :
+			    		OPENPIC_POLARITY_NEGATIVE) |
+				(sense ? OPENPIC_SENSE_LEVEL : OPENPIC_SENSE_EDGE));
+}
+
+/*
+ *  Map an interrupt source to one or more CPUs
+ */
+static void openpic_mapirq(u_int irq, cpumask_t physmask, cpumask_t keepmask)
+{
+	if (ISR[irq] == 0)
+		return;
+	if (!cpus_empty(keepmask)) {
+		cpumask_t irqdest = { .bits[0] = openpic_read(&ISR[irq]->Destination) };
+		cpus_and(irqdest, irqdest, keepmask);
+		cpus_or(physmask, physmask, irqdest);
+	}
+	openpic_write(&ISR[irq]->Destination, cpus_addr(physmask)[0]);
+}
+
+#ifdef notused
+/*
+ *  Set the sense for an interrupt source (and disable it!)
+ *
+ *  sense: 1 for level, 0 for edge
+ */
+static void openpic_set_sense(u_int irq, int sense)
+{
+	if (ISR[irq] != 0)
+		openpic_safe_writefield(&ISR[irq]->Vector_Priority,
+					OPENPIC_SENSE_LEVEL,
+					(sense ? OPENPIC_SENSE_LEVEL : 0));
+}
+#endif /* notused */
+
+/* No spinlocks, should not be necessary with the OpenPIC
+ * (1 register = 1 interrupt and we have the desc lock).
+ */
+static void openpic_ack_irq(unsigned int irq_nr)
+{
+#ifdef __SLOW_VERSION__
+	openpic_disable_irq(irq_nr);
+	openpic_eoi();
+#else
+	if ((irq_desc[irq_nr].status & IRQ_LEVEL) == 0)
+		openpic_eoi();
+#endif
+}
+
+static void openpic_end_irq(unsigned int irq_nr)
+{
+#ifdef __SLOW_VERSION__
+	if (!(irq_desc[irq_nr].status & (IRQ_DISABLED|IRQ_INPROGRESS))
+	    && irq_desc[irq_nr].action)
+		openpic_enable_irq(irq_nr);
+#else
+	if ((irq_desc[irq_nr].status & IRQ_LEVEL) != 0)
+		openpic_eoi();
+#endif
+}
+
+static void openpic_set_affinity(unsigned int irq_nr, cpumask_t cpumask)
+{
+	openpic_mapirq(irq_nr - open_pic_irq_offset, physmask(cpumask), CPU_MASK_NONE);
+}
+
+#ifdef CONFIG_SMP
+static void openpic_ack_ipi(unsigned int irq_nr)
+{
+	openpic_eoi();
+}
+
+static void openpic_end_ipi(unsigned int irq_nr)
+{
+}
+
+static irqreturn_t openpic_ipi_action(int cpl, void *dev_id, struct pt_regs *regs)
+{
+	smp_message_recv(cpl-OPENPIC_VEC_IPI-open_pic_irq_offset, regs);
+	return IRQ_HANDLED;
+}
+
+#endif /* CONFIG_SMP */
+
+int
+openpic_get_irq(struct pt_regs *regs)
+{
+	int irq = openpic_irq();
+
+	/*
+	 * Check for the cascade interrupt and call the cascaded
+	 * interrupt controller function (usually i8259_irq) if so.
+	 * This should move to irq.c eventually.  -- paulus
+	 */
+	if (irq == openpic_cascade_irq && openpic_cascade_fn != NULL) {
+		int cirq = openpic_cascade_fn(regs);
+
+		/* Allow for the cascade being shared with other devices */
+		if (cirq != -1) {
+			irq = cirq;
+			openpic_eoi();
+		}
+	} else if (irq == OPENPIC_VEC_SPURIOUS)
+		irq = -1;
+	return irq;
+}
+
+#ifdef CONFIG_SMP
+void
+smp_openpic_message_pass(int target, int msg, unsigned long data, int wait)
+{
+	cpumask_t mask = CPU_MASK_ALL;
+	/* make sure we're sending something that translates to an IPI */
+	if (msg > 0x3) {
+		printk("SMP %d: smp_message_pass: unknown msg %d\n",
+		       smp_processor_id(), msg);
+		return;
+	}
+	switch (target) {
+	case MSG_ALL:
+		openpic_cause_IPI(msg, mask);
+		break;
+	case MSG_ALL_BUT_SELF:
+		cpu_clear(smp_processor_id(), mask);
+		openpic_cause_IPI(msg, mask);
+		break;
+	default:
+		openpic_cause_IPI(msg, cpumask_of_cpu(target));
+		break;
+	}
+}
+#endif /* CONFIG_SMP */
+
+#ifdef CONFIG_PM
+
+/*
+ * We implement the IRQ controller as a sysdev and put it
+ * to sleep at powerdown stage (the callback is named suspend,
+ * but it's old semantics, for the Device Model, it's really
+ * powerdown). The possible problem is that another sysdev that
+ * happens to be suspend after this one will have interrupts off,
+ * that may be an issue... For now, this isn't an issue on pmac
+ * though...
+ */
+
+static u32 save_ipi_vp[OPENPIC_NUM_IPI];
+static u32 save_irq_src_vp[OPENPIC_MAX_SOURCES];
+static u32 save_irq_src_dest[OPENPIC_MAX_SOURCES];
+static u32 save_cpu_task_pri[OPENPIC_MAX_PROCESSORS];
+static int openpic_suspend_count;
+
+static void openpic_cached_enable_irq(u_int irq)
+{
+	check_arg_irq(irq);
+	save_irq_src_vp[irq - open_pic_irq_offset] &= ~OPENPIC_MASK;
+}
+
+static void openpic_cached_disable_irq(u_int irq)
+{
+	check_arg_irq(irq);
+	save_irq_src_vp[irq - open_pic_irq_offset] |= OPENPIC_MASK;
+}
+
+/* WARNING: Can be called directly by the cpufreq code with NULL parameter,
+ * we need something better to deal with that... Maybe switch to S1 for
+ * cpufreq changes
+ */
+int openpic_suspend(struct sys_device *sysdev, u32 state)
+{
+	int	i;
+	unsigned long flags;
+
+	spin_lock_irqsave(&openpic_setup_lock, flags);
+
+	if (openpic_suspend_count++ > 0) {
+		spin_unlock_irqrestore(&openpic_setup_lock, flags);
+		return 0;
+	}
+
+ 	openpic_set_priority(0xf);
+
+	open_pic.enable = openpic_cached_enable_irq;
+	open_pic.disable = openpic_cached_disable_irq;
+
+	for (i=0; i<NumProcessors; i++) {
+		save_cpu_task_pri[i] = openpic_read(&OpenPIC->Processor[i].Current_Task_Priority);
+		openpic_writefield(&OpenPIC->Processor[i].Current_Task_Priority,
+				   OPENPIC_CURRENT_TASK_PRIORITY_MASK, 0xf);
+	}
+
+	for (i=0; i<OPENPIC_NUM_IPI; i++)
+		save_ipi_vp[i] = openpic_read(&OpenPIC->Global.IPI_Vector_Priority(i));
+	for (i=0; i<NumSources; i++) {
+		if (ISR[i] == 0)
+			continue;
+		save_irq_src_vp[i] = openpic_read(&ISR[i]->Vector_Priority) & ~OPENPIC_ACTIVITY;
+		save_irq_src_dest[i] = openpic_read(&ISR[i]->Destination);
+	}
+
+	spin_unlock_irqrestore(&openpic_setup_lock, flags);
+
+	return 0;
+}
+
+/* WARNING: Can be called directly by the cpufreq code with NULL parameter,
+ * we need something better to deal with that... Maybe switch to S1 for
+ * cpufreq changes
+ */
+int openpic_resume(struct sys_device *sysdev)
+{
+	int		i;
+	unsigned long	flags;
+	u32		vppmask =	OPENPIC_PRIORITY_MASK | OPENPIC_VECTOR_MASK |
+					OPENPIC_SENSE_MASK | OPENPIC_POLARITY_MASK |
+					OPENPIC_MASK;
+
+	spin_lock_irqsave(&openpic_setup_lock, flags);
+
+	if ((--openpic_suspend_count) > 0) {
+		spin_unlock_irqrestore(&openpic_setup_lock, flags);
+		return 0;
+	}
+
+	openpic_reset();
+
+	/* OpenPIC sometimes seem to need some time to be fully back up... */
+	do {
+		openpic_set_spurious(OPENPIC_VEC_SPURIOUS);
+	} while(openpic_readfield(&OpenPIC->Global.Spurious_Vector, OPENPIC_VECTOR_MASK)
+			!= OPENPIC_VEC_SPURIOUS);
+	
+	openpic_disable_8259_pass_through();
+
+	for (i=0; i<OPENPIC_NUM_IPI; i++)
+		openpic_write(&OpenPIC->Global.IPI_Vector_Priority(i),
+			      save_ipi_vp[i]);
+	for (i=0; i<NumSources; i++) {
+		if (ISR[i] == 0)
+			continue;
+		openpic_write(&ISR[i]->Destination, save_irq_src_dest[i]);
+		openpic_write(&ISR[i]->Vector_Priority, save_irq_src_vp[i]);
+		/* make sure mask gets to controller before we return to user */
+		do {
+			openpic_write(&ISR[i]->Vector_Priority, save_irq_src_vp[i]);
+		} while (openpic_readfield(&ISR[i]->Vector_Priority, vppmask)
+			 != (save_irq_src_vp[i] & vppmask));
+	}
+	for (i=0; i<NumProcessors; i++)
+		openpic_write(&OpenPIC->Processor[i].Current_Task_Priority,
+			      save_cpu_task_pri[i]);
+
+	open_pic.enable = openpic_enable_irq;
+	open_pic.disable = openpic_disable_irq;
+
+ 	openpic_set_priority(0);
+
+	spin_unlock_irqrestore(&openpic_setup_lock, flags);
+
+	return 0;
+}
+
+#endif /* CONFIG_PM */
+
+static struct sysdev_class openpic_sysclass = {
+	set_kset_name("openpic"),
+};
+
+static struct sys_device device_openpic = {
+	.id		= 0,
+	.cls		= &openpic_sysclass,
+};
+
+static struct sysdev_driver driver_openpic = {
+#ifdef CONFIG_PM
+	.suspend	= &openpic_suspend,
+	.resume		= &openpic_resume,
+#endif /* CONFIG_PM */
+};
+
+static int __init init_openpic_sysfs(void)
+{
+	int rc;
+
+	if (!OpenPIC_Addr)
+		return -ENODEV;
+	printk(KERN_DEBUG "Registering openpic with sysfs...\n");
+	rc = sysdev_class_register(&openpic_sysclass);
+	if (rc) {
+		printk(KERN_ERR "Failed registering openpic sys class\n");
+		return -ENODEV;
+	}
+	rc = sysdev_register(&device_openpic);
+	if (rc) {
+		printk(KERN_ERR "Failed registering openpic sys device\n");
+		return -ENODEV;
+	}
+	rc = sysdev_driver_register(&openpic_sysclass, &driver_openpic);
+	if (rc) {
+		printk(KERN_ERR "Failed registering openpic sys driver\n");
+		return -ENODEV;
+	}
+	return 0;
+}
+
+subsys_initcall(init_openpic_sysfs);
+
diff --git a/arch/ppc/syslib/open_pic2.c b/arch/ppc/syslib/open_pic2.c
new file mode 100644
index 000000000000..ea26da0d8b6b
--- /dev/null
+++ b/arch/ppc/syslib/open_pic2.c
@@ -0,0 +1,716 @@
+/*
+ *  arch/ppc/kernel/open_pic.c -- OpenPIC Interrupt Handling
+ *
+ *  Copyright (C) 1997 Geert Uytterhoeven
+ *
+ *  This file is subject to the terms and conditions of the GNU General Public
+ *  License.  See the file COPYING in the main directory of this archive
+ *  for more details.
+ *
+ *  This is a duplicate of open_pic.c that deals with U3s MPIC on
+ *  G5 PowerMacs. It's the same file except it's using big endian
+ *  register accesses
+ */
+
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/sysdev.h>
+#include <linux/errno.h>
+#include <asm/ptrace.h>
+#include <asm/signal.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/prom.h>
+#include <asm/sections.h>
+#include <asm/open_pic.h>
+#include <asm/i8259.h>
+
+#include "open_pic_defs.h"
+
+void *OpenPIC2_Addr;
+static volatile struct OpenPIC *OpenPIC2 = NULL;
+/*
+ * We define OpenPIC_InitSenses table thusly:
+ * bit 0x1: sense, 0 for edge and 1 for level.
+ * bit 0x2: polarity, 0 for negative, 1 for positive.
+ */
+extern  u_int OpenPIC_NumInitSenses;
+extern u_char *OpenPIC_InitSenses;
+extern int use_of_interrupt_tree;
+
+static u_int NumProcessors;
+static u_int NumSources;
+static int open_pic2_irq_offset;
+static volatile OpenPIC_Source *ISR[NR_IRQS];
+
+/* Global Operations */
+static void openpic2_disable_8259_pass_through(void);
+static void openpic2_set_priority(u_int pri);
+static void openpic2_set_spurious(u_int vector);
+
+/* Timer Interrupts */
+static void openpic2_inittimer(u_int timer, u_int pri, u_int vector);
+static void openpic2_maptimer(u_int timer, u_int cpumask);
+
+/* Interrupt Sources */
+static void openpic2_enable_irq(u_int irq);
+static void openpic2_disable_irq(u_int irq);
+static void openpic2_initirq(u_int irq, u_int pri, u_int vector, int polarity,
+			    int is_level);
+static void openpic2_mapirq(u_int irq, u_int cpumask, u_int keepmask);
+
+/*
+ * These functions are not used but the code is kept here
+ * for completeness and future reference.
+ */
+static void openpic2_reset(void);
+#ifdef notused
+static void openpic2_enable_8259_pass_through(void);
+static u_int openpic2_get_priority(void);
+static u_int openpic2_get_spurious(void);
+static void openpic2_set_sense(u_int irq, int sense);
+#endif /* notused */
+
+/*
+ * Description of the openpic for the higher-level irq code
+ */
+static void openpic2_end_irq(unsigned int irq_nr);
+static void openpic2_ack_irq(unsigned int irq_nr);
+
+struct hw_interrupt_type open_pic2 = {
+	" OpenPIC2 ",
+	NULL,
+	NULL,
+	openpic2_enable_irq,
+	openpic2_disable_irq,
+	openpic2_ack_irq,
+	openpic2_end_irq,
+};
+
+/*
+ *  Accesses to the current processor's openpic registers
+ *  On cascaded controller, this is only CPU 0
+ */
+#define THIS_CPU		Processor[0]
+#define DECL_THIS_CPU
+#define CHECK_THIS_CPU
+
+#if 1
+#define check_arg_ipi(ipi) \
+    if (ipi < 0 || ipi >= OPENPIC_NUM_IPI) \
+	printk("open_pic.c:%d: illegal ipi %d\n", __LINE__, ipi);
+#define check_arg_timer(timer) \
+    if (timer < 0 || timer >= OPENPIC_NUM_TIMERS) \
+	printk("open_pic.c:%d: illegal timer %d\n", __LINE__, timer);
+#define check_arg_vec(vec) \
+    if (vec < 0 || vec >= OPENPIC_NUM_VECTORS) \
+	printk("open_pic.c:%d: illegal vector %d\n", __LINE__, vec);
+#define check_arg_pri(pri) \
+    if (pri < 0 || pri >= OPENPIC_NUM_PRI) \
+	printk("open_pic.c:%d: illegal priority %d\n", __LINE__, pri);
+/*
+ * Print out a backtrace if it's out of range, since if it's larger than NR_IRQ's
+ * data has probably been corrupted and we're going to panic or deadlock later
+ * anyway --Troy
+ */
+extern unsigned long* _get_SP(void);
+#define check_arg_irq(irq) \
+    if (irq < open_pic2_irq_offset || irq >= NumSources+open_pic2_irq_offset \
+	|| ISR[irq - open_pic2_irq_offset] == 0) { \
+      printk("open_pic.c:%d: illegal irq %d\n", __LINE__, irq); \
+      /*print_backtrace(_get_SP());*/ }
+#define check_arg_cpu(cpu) \
+    if (cpu < 0 || cpu >= NumProcessors){ \
+	printk("open_pic2.c:%d: illegal cpu %d\n", __LINE__, cpu); \
+	/*print_backtrace(_get_SP());*/ }
+#else
+#define check_arg_ipi(ipi)	do {} while (0)
+#define check_arg_timer(timer)	do {} while (0)
+#define check_arg_vec(vec)	do {} while (0)
+#define check_arg_pri(pri)	do {} while (0)
+#define check_arg_irq(irq)	do {} while (0)
+#define check_arg_cpu(cpu)	do {} while (0)
+#endif
+
+static u_int openpic2_read(volatile u_int *addr)
+{
+	u_int val;
+
+	val = in_be32(addr);
+	return val;
+}
+
+static inline void openpic2_write(volatile u_int *addr, u_int val)
+{
+	out_be32(addr, val);
+}
+
+static inline u_int openpic2_readfield(volatile u_int *addr, u_int mask)
+{
+	u_int val = openpic2_read(addr);
+	return val & mask;
+}
+
+inline void openpic2_writefield(volatile u_int *addr, u_int mask,
+			       u_int field)
+{
+	u_int val = openpic2_read(addr);
+	openpic2_write(addr, (val & ~mask) | (field & mask));
+}
+
+static inline void openpic2_clearfield(volatile u_int *addr, u_int mask)
+{
+	openpic2_writefield(addr, mask, 0);
+}
+
+static inline void openpic2_setfield(volatile u_int *addr, u_int mask)
+{
+	openpic2_writefield(addr, mask, mask);
+}
+
+static void openpic2_safe_writefield(volatile u_int *addr, u_int mask,
+				    u_int field)
+{
+	openpic2_setfield(addr, OPENPIC_MASK);
+	while (openpic2_read(addr) & OPENPIC_ACTIVITY);
+	openpic2_writefield(addr, mask | OPENPIC_MASK, field | OPENPIC_MASK);
+}
+
+static void openpic2_reset(void)
+{
+	openpic2_setfield(&OpenPIC2->Global.Global_Configuration0,
+			 OPENPIC_CONFIG_RESET);
+	while (openpic2_readfield(&OpenPIC2->Global.Global_Configuration0,
+				 OPENPIC_CONFIG_RESET))
+		mb();
+}
+
+void __init openpic2_set_sources(int first_irq, int num_irqs, void *first_ISR)
+{
+	volatile OpenPIC_Source *src = first_ISR;
+	int i, last_irq;
+
+	last_irq = first_irq + num_irqs;
+	if (last_irq > NumSources)
+		NumSources = last_irq;
+	if (src == 0)
+		src = &((struct OpenPIC *)OpenPIC2_Addr)->Source[first_irq];
+	for (i = first_irq; i < last_irq; ++i, ++src)
+		ISR[i] = src;
+}
+
+/*
+ * The `offset' parameter defines where the interrupts handled by the
+ * OpenPIC start in the space of interrupt numbers that the kernel knows
+ * about.  In other words, the OpenPIC's IRQ0 is numbered `offset' in the
+ * kernel's interrupt numbering scheme.
+ * We assume there is only one OpenPIC.
+ */
+void __init openpic2_init(int offset)
+{
+	u_int t, i;
+	u_int timerfreq;
+	const char *version;
+
+	if (!OpenPIC2_Addr) {
+		printk("No OpenPIC2 found !\n");
+		return;
+	}
+	OpenPIC2 = (volatile struct OpenPIC *)OpenPIC2_Addr;
+
+	if (ppc_md.progress) ppc_md.progress("openpic: enter", 0x122);
+
+	t = openpic2_read(&OpenPIC2->Global.Feature_Reporting0);
+	switch (t & OPENPIC_FEATURE_VERSION_MASK) {
+	case 1:
+		version = "1.0";
+		break;
+	case 2:
+		version = "1.2";
+		break;
+	case 3:
+		version = "1.3";
+		break;
+	default:
+		version = "?";
+		break;
+	}
+	NumProcessors = ((t & OPENPIC_FEATURE_LAST_PROCESSOR_MASK) >>
+			 OPENPIC_FEATURE_LAST_PROCESSOR_SHIFT) + 1;
+	if (NumSources == 0)
+		openpic2_set_sources(0,
+				    ((t & OPENPIC_FEATURE_LAST_SOURCE_MASK) >>
+				     OPENPIC_FEATURE_LAST_SOURCE_SHIFT) + 1,
+				    NULL);
+	printk("OpenPIC (2) Version %s (%d CPUs and %d IRQ sources) at %p\n",
+	       version, NumProcessors, NumSources, OpenPIC2);
+	timerfreq = openpic2_read(&OpenPIC2->Global.Timer_Frequency);
+	if (timerfreq)
+		printk("OpenPIC timer frequency is %d.%06d MHz\n",
+		       timerfreq / 1000000, timerfreq % 1000000);
+
+	open_pic2_irq_offset = offset;
+
+	/* Initialize timer interrupts */
+	if ( ppc_md.progress ) ppc_md.progress("openpic2: timer",0x3ba);
+	for (i = 0; i < OPENPIC_NUM_TIMERS; i++) {
+		/* Disabled, Priority 0 */
+		openpic2_inittimer(i, 0, OPENPIC2_VEC_TIMER+i+offset);
+		/* No processor */
+		openpic2_maptimer(i, 0);
+	}
+
+	/* Initialize external interrupts */
+	if (ppc_md.progress) ppc_md.progress("openpic2: external",0x3bc);
+
+	openpic2_set_priority(0xf);
+
+	/* Init all external sources, including possibly the cascade. */
+	for (i = 0; i < NumSources; i++) {
+		int sense;
+
+		if (ISR[i] == 0)
+			continue;
+
+		/* the bootloader may have left it enabled (bad !) */
+		openpic2_disable_irq(i+offset);
+
+		sense = (i < OpenPIC_NumInitSenses)? OpenPIC_InitSenses[i]: \
+				(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE);
+
+		if (sense & IRQ_SENSE_MASK)
+			irq_desc[i+offset].status = IRQ_LEVEL;
+
+		/* Enabled, Priority 8 */
+		openpic2_initirq(i, 8, i+offset, (sense & IRQ_POLARITY_MASK),
+				(sense & IRQ_SENSE_MASK));
+		/* Processor 0 */
+		openpic2_mapirq(i, 1<<0, 0);
+	}
+
+	/* Init descriptors */
+	for (i = offset; i < NumSources + offset; i++)
+		irq_desc[i].handler = &open_pic2;
+
+	/* Initialize the spurious interrupt */
+	if (ppc_md.progress) ppc_md.progress("openpic2: spurious",0x3bd);
+	openpic2_set_spurious(OPENPIC2_VEC_SPURIOUS+offset);
+
+	openpic2_disable_8259_pass_through();
+	openpic2_set_priority(0);
+
+	if (ppc_md.progress) ppc_md.progress("openpic2: exit",0x222);
+}
+
+#ifdef notused
+static void openpic2_enable_8259_pass_through(void)
+{
+	openpic2_clearfield(&OpenPIC2->Global.Global_Configuration0,
+			   OPENPIC_CONFIG_8259_PASSTHROUGH_DISABLE);
+}
+#endif /* notused */
+
+/* This can't be __init, it is used in openpic_sleep_restore_intrs */
+static void openpic2_disable_8259_pass_through(void)
+{
+	openpic2_setfield(&OpenPIC2->Global.Global_Configuration0,
+			 OPENPIC_CONFIG_8259_PASSTHROUGH_DISABLE);
+}
+
+/*
+ *  Find out the current interrupt
+ */
+u_int openpic2_irq(void)
+{
+	u_int vec;
+	DECL_THIS_CPU;
+
+	CHECK_THIS_CPU;
+	vec = openpic2_readfield(&OpenPIC2->THIS_CPU.Interrupt_Acknowledge,
+				OPENPIC_VECTOR_MASK);
+	return vec;
+}
+
+void openpic2_eoi(void)
+{
+	DECL_THIS_CPU;
+
+	CHECK_THIS_CPU;
+	openpic2_write(&OpenPIC2->THIS_CPU.EOI, 0);
+	/* Handle PCI write posting */
+	(void)openpic2_read(&OpenPIC2->THIS_CPU.EOI);
+}
+
+#ifdef notused
+static u_int openpic2_get_priority(void)
+{
+	DECL_THIS_CPU;
+
+	CHECK_THIS_CPU;
+	return openpic2_readfield(&OpenPIC2->THIS_CPU.Current_Task_Priority,
+				 OPENPIC_CURRENT_TASK_PRIORITY_MASK);
+}
+#endif /* notused */
+
+static void __init openpic2_set_priority(u_int pri)
+{
+	DECL_THIS_CPU;
+
+	CHECK_THIS_CPU;
+	check_arg_pri(pri);
+	openpic2_writefield(&OpenPIC2->THIS_CPU.Current_Task_Priority,
+			   OPENPIC_CURRENT_TASK_PRIORITY_MASK, pri);
+}
+
+/*
+ *  Get/set the spurious vector
+ */
+#ifdef notused
+static u_int openpic2_get_spurious(void)
+{
+	return openpic2_readfield(&OpenPIC2->Global.Spurious_Vector,
+				 OPENPIC_VECTOR_MASK);
+}
+#endif /* notused */
+
+/* This can't be __init, it is used in openpic_sleep_restore_intrs */
+static void openpic2_set_spurious(u_int vec)
+{
+	check_arg_vec(vec);
+	openpic2_writefield(&OpenPIC2->Global.Spurious_Vector, OPENPIC_VECTOR_MASK,
+			   vec);
+}
+
+static DEFINE_SPINLOCK(openpic2_setup_lock);
+
+/*
+ *  Initialize a timer interrupt (and disable it)
+ *
+ *  timer: OpenPIC timer number
+ *  pri: interrupt source priority
+ *  vec: the vector it will produce
+ */
+static void __init openpic2_inittimer(u_int timer, u_int pri, u_int vec)
+{
+	check_arg_timer(timer);
+	check_arg_pri(pri);
+	check_arg_vec(vec);
+	openpic2_safe_writefield(&OpenPIC2->Global.Timer[timer].Vector_Priority,
+				OPENPIC_PRIORITY_MASK | OPENPIC_VECTOR_MASK,
+				(pri << OPENPIC_PRIORITY_SHIFT) | vec);
+}
+
+/*
+ *  Map a timer interrupt to one or more CPUs
+ */
+static void __init openpic2_maptimer(u_int timer, u_int cpumask)
+{
+	check_arg_timer(timer);
+	openpic2_write(&OpenPIC2->Global.Timer[timer].Destination,
+		      cpumask);
+}
+
+/*
+ * Initalize the interrupt source which will generate an NMI.
+ * This raises the interrupt's priority from 8 to 9.
+ *
+ * irq: The logical IRQ which generates an NMI.
+ */
+void __init
+openpic2_init_nmi_irq(u_int irq)
+{
+	check_arg_irq(irq);
+	openpic2_safe_writefield(&ISR[irq - open_pic2_irq_offset]->Vector_Priority,
+				OPENPIC_PRIORITY_MASK,
+				9 << OPENPIC_PRIORITY_SHIFT);
+}
+
+/*
+ *
+ * All functions below take an offset'ed irq argument
+ *
+ */
+
+
+/*
+ *  Enable/disable an external interrupt source
+ *
+ *  Externally called, irq is an offseted system-wide interrupt number
+ */
+static void openpic2_enable_irq(u_int irq)
+{
+	volatile u_int *vpp;
+
+	check_arg_irq(irq);
+	vpp = &ISR[irq - open_pic2_irq_offset]->Vector_Priority;
+       	openpic2_clearfield(vpp, OPENPIC_MASK);
+	/* make sure mask gets to controller before we return to user */
+       	do {
+       		mb(); /* sync is probably useless here */
+       	} while (openpic2_readfield(vpp, OPENPIC_MASK));
+}
+
+static void openpic2_disable_irq(u_int irq)
+{
+	volatile u_int *vpp;
+	u32 vp;
+
+	check_arg_irq(irq);
+	vpp = &ISR[irq - open_pic2_irq_offset]->Vector_Priority;
+	openpic2_setfield(vpp, OPENPIC_MASK);
+	/* make sure mask gets to controller before we return to user */
+	do {
+		mb();  /* sync is probably useless here */
+		vp = openpic2_readfield(vpp, OPENPIC_MASK | OPENPIC_ACTIVITY);
+	} while((vp & OPENPIC_ACTIVITY) && !(vp & OPENPIC_MASK));
+}
+
+
+/*
+ *  Initialize an interrupt source (and disable it!)
+ *
+ *  irq: OpenPIC interrupt number
+ *  pri: interrupt source priority
+ *  vec: the vector it will produce
+ *  pol: polarity (1 for positive, 0 for negative)
+ *  sense: 1 for level, 0 for edge
+ */
+static void __init
+openpic2_initirq(u_int irq, u_int pri, u_int vec, int pol, int sense)
+{
+	openpic2_safe_writefield(&ISR[irq]->Vector_Priority,
+				OPENPIC_PRIORITY_MASK | OPENPIC_VECTOR_MASK |
+				OPENPIC_SENSE_MASK | OPENPIC_POLARITY_MASK,
+				(pri << OPENPIC_PRIORITY_SHIFT) | vec |
+				(pol ? OPENPIC_POLARITY_POSITIVE :
+			    		OPENPIC_POLARITY_NEGATIVE) |
+				(sense ? OPENPIC_SENSE_LEVEL : OPENPIC_SENSE_EDGE));
+}
+
+/*
+ *  Map an interrupt source to one or more CPUs
+ */
+static void openpic2_mapirq(u_int irq, u_int physmask, u_int keepmask)
+{
+	if (ISR[irq] == 0)
+		return;
+	if (keepmask != 0)
+		physmask |= openpic2_read(&ISR[irq]->Destination) & keepmask;
+	openpic2_write(&ISR[irq]->Destination, physmask);
+}
+
+#ifdef notused
+/*
+ *  Set the sense for an interrupt source (and disable it!)
+ *
+ *  sense: 1 for level, 0 for edge
+ */
+static void openpic2_set_sense(u_int irq, int sense)
+{
+	if (ISR[irq] != 0)
+		openpic2_safe_writefield(&ISR[irq]->Vector_Priority,
+					OPENPIC_SENSE_LEVEL,
+					(sense ? OPENPIC_SENSE_LEVEL : 0));
+}
+#endif /* notused */
+
+/* No spinlocks, should not be necessary with the OpenPIC
+ * (1 register = 1 interrupt and we have the desc lock).
+ */
+static void openpic2_ack_irq(unsigned int irq_nr)
+{
+	openpic2_disable_irq(irq_nr);
+	openpic2_eoi();
+}
+
+static void openpic2_end_irq(unsigned int irq_nr)
+{
+	if (!(irq_desc[irq_nr].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
+		openpic2_enable_irq(irq_nr);
+}
+
+int
+openpic2_get_irq(struct pt_regs *regs)
+{
+	int irq = openpic2_irq();
+
+	if (irq == (OPENPIC2_VEC_SPURIOUS + open_pic2_irq_offset))
+		irq = -1;
+	return irq;
+}
+
+#ifdef CONFIG_PM
+
+/*
+ * We implement the IRQ controller as a sysdev and put it
+ * to sleep at powerdown stage (the callback is named suspend,
+ * but it's old semantics, for the Device Model, it's really
+ * powerdown). The possible problem is that another sysdev that
+ * happens to be suspend after this one will have interrupts off,
+ * that may be an issue... For now, this isn't an issue on pmac
+ * though...
+ */
+
+static u32 save_ipi_vp[OPENPIC_NUM_IPI];
+static u32 save_irq_src_vp[OPENPIC_MAX_SOURCES];
+static u32 save_irq_src_dest[OPENPIC_MAX_SOURCES];
+static u32 save_cpu_task_pri[OPENPIC_MAX_PROCESSORS];
+static int openpic_suspend_count;
+
+static void openpic2_cached_enable_irq(u_int irq)
+{
+	check_arg_irq(irq);
+	save_irq_src_vp[irq - open_pic2_irq_offset] &= ~OPENPIC_MASK;
+}
+
+static void openpic2_cached_disable_irq(u_int irq)
+{
+	check_arg_irq(irq);
+	save_irq_src_vp[irq - open_pic2_irq_offset] |= OPENPIC_MASK;
+}
+
+/* WARNING: Can be called directly by the cpufreq code with NULL parameter,
+ * we need something better to deal with that... Maybe switch to S1 for
+ * cpufreq changes
+ */
+int openpic2_suspend(struct sys_device *sysdev, u32 state)
+{
+	int	i;
+	unsigned long flags;
+
+	spin_lock_irqsave(&openpic2_setup_lock, flags);
+
+	if (openpic_suspend_count++ > 0) {
+		spin_unlock_irqrestore(&openpic2_setup_lock, flags);
+		return 0;
+	}
+
+	open_pic2.enable = openpic2_cached_enable_irq;
+	open_pic2.disable = openpic2_cached_disable_irq;
+
+	for (i=0; i<NumProcessors; i++) {
+		save_cpu_task_pri[i] = openpic2_read(&OpenPIC2->Processor[i].Current_Task_Priority);
+		openpic2_writefield(&OpenPIC2->Processor[i].Current_Task_Priority,
+				   OPENPIC_CURRENT_TASK_PRIORITY_MASK, 0xf);
+	}
+
+	for (i=0; i<OPENPIC_NUM_IPI; i++)
+		save_ipi_vp[i] = openpic2_read(&OpenPIC2->Global.IPI_Vector_Priority(i));
+	for (i=0; i<NumSources; i++) {
+		if (ISR[i] == 0)
+			continue;
+		save_irq_src_vp[i] = openpic2_read(&ISR[i]->Vector_Priority) & ~OPENPIC_ACTIVITY;
+		save_irq_src_dest[i] = openpic2_read(&ISR[i]->Destination);
+	}
+
+	spin_unlock_irqrestore(&openpic2_setup_lock, flags);
+
+	return 0;
+}
+
+/* WARNING: Can be called directly by the cpufreq code with NULL parameter,
+ * we need something better to deal with that... Maybe switch to S1 for
+ * cpufreq changes
+ */
+int openpic2_resume(struct sys_device *sysdev)
+{
+	int		i;
+	unsigned long	flags;
+	u32		vppmask =	OPENPIC_PRIORITY_MASK | OPENPIC_VECTOR_MASK |
+					OPENPIC_SENSE_MASK | OPENPIC_POLARITY_MASK |
+					OPENPIC_MASK;
+
+	spin_lock_irqsave(&openpic2_setup_lock, flags);
+
+	if ((--openpic_suspend_count) > 0) {
+		spin_unlock_irqrestore(&openpic2_setup_lock, flags);
+		return 0;
+	}
+
+	openpic2_reset();
+
+	/* OpenPIC sometimes seem to need some time to be fully back up... */
+	do {
+		openpic2_set_spurious(OPENPIC2_VEC_SPURIOUS+open_pic2_irq_offset);
+	} while(openpic2_readfield(&OpenPIC2->Global.Spurious_Vector, OPENPIC_VECTOR_MASK)
+			!= (OPENPIC2_VEC_SPURIOUS + open_pic2_irq_offset));
+	
+	openpic2_disable_8259_pass_through();
+
+	for (i=0; i<OPENPIC_NUM_IPI; i++)
+		openpic2_write(&OpenPIC2->Global.IPI_Vector_Priority(i),
+			      save_ipi_vp[i]);
+	for (i=0; i<NumSources; i++) {
+		if (ISR[i] == 0)
+			continue;
+		openpic2_write(&ISR[i]->Destination, save_irq_src_dest[i]);
+		openpic2_write(&ISR[i]->Vector_Priority, save_irq_src_vp[i]);
+		/* make sure mask gets to controller before we return to user */
+		do {
+			openpic2_write(&ISR[i]->Vector_Priority, save_irq_src_vp[i]);
+		} while (openpic2_readfield(&ISR[i]->Vector_Priority, vppmask)
+			 != (save_irq_src_vp[i] & vppmask));
+	}
+	for (i=0; i<NumProcessors; i++)
+		openpic2_write(&OpenPIC2->Processor[i].Current_Task_Priority,
+			      save_cpu_task_pri[i]);
+
+	open_pic2.enable = openpic2_enable_irq;
+	open_pic2.disable = openpic2_disable_irq;
+
+	spin_unlock_irqrestore(&openpic2_setup_lock, flags);
+
+	return 0;
+}
+
+#endif /* CONFIG_PM */
+
+/* HACK ALERT */
+static struct sysdev_class openpic2_sysclass = {
+	set_kset_name("openpic2"),
+};
+
+static struct sys_device device_openpic2 = {
+	.id		= 0,
+	.cls		= &openpic2_sysclass,
+};
+
+static struct sysdev_driver driver_openpic2 = {
+#ifdef CONFIG_PM
+	.suspend	= &openpic2_suspend,
+	.resume		= &openpic2_resume,
+#endif /* CONFIG_PM */
+};
+
+static int __init init_openpic2_sysfs(void)
+{
+	int rc;
+
+	if (!OpenPIC2_Addr)
+		return -ENODEV;
+	printk(KERN_DEBUG "Registering openpic2 with sysfs...\n");
+	rc = sysdev_class_register(&openpic2_sysclass);
+	if (rc) {
+		printk(KERN_ERR "Failed registering openpic sys class\n");
+		return -ENODEV;
+	}
+	rc = sysdev_register(&device_openpic2);
+	if (rc) {
+		printk(KERN_ERR "Failed registering openpic sys device\n");
+		return -ENODEV;
+	}
+	rc = sysdev_driver_register(&openpic2_sysclass, &driver_openpic2);
+	if (rc) {
+		printk(KERN_ERR "Failed registering openpic sys driver\n");
+		return -ENODEV;
+	}
+	return 0;
+}
+
+subsys_initcall(init_openpic2_sysfs);
+
diff --git a/arch/ppc/syslib/open_pic_defs.h b/arch/ppc/syslib/open_pic_defs.h
new file mode 100644
index 000000000000..4f05624b249e
--- /dev/null
+++ b/arch/ppc/syslib/open_pic_defs.h
@@ -0,0 +1,292 @@
+/*
+ *  arch/ppc/kernel/open_pic_defs.h -- OpenPIC definitions
+ *
+ *  Copyright (C) 1997 Geert Uytterhoeven
+ *
+ *  This file is based on the following documentation:
+ *
+ *	The Open Programmable Interrupt Controller (PIC)
+ *	Register Interface Specification Revision 1.2
+ *
+ *	Issue Date: October 1995
+ *
+ *	Issued jointly by Advanced Micro Devices and Cyrix Corporation
+ *
+ *	AMD is a registered trademark of Advanced Micro Devices, Inc.
+ *	Copyright (C) 1995, Advanced Micro Devices, Inc. and Cyrix, Inc.
+ *	All Rights Reserved.
+ *
+ *  To receive a copy of this documentation, send an email to openpic@amd.com.
+ *
+ *  This file is subject to the terms and conditions of the GNU General Public
+ *  License.  See the file COPYING in the main directory of this archive
+ *  for more details.
+ */
+
+#ifndef _LINUX_OPENPIC_H
+#define _LINUX_OPENPIC_H
+
+#ifdef __KERNEL__
+
+    /*
+     *  OpenPIC supports up to 2048 interrupt sources and up to 32 processors
+     */
+
+#define OPENPIC_MAX_SOURCES	2048
+#define OPENPIC_MAX_PROCESSORS	32
+#define OPENPIC_MAX_ISU		16
+
+#define OPENPIC_NUM_TIMERS	4
+#define OPENPIC_NUM_IPI		4
+#define OPENPIC_NUM_PRI		16
+#define OPENPIC_NUM_VECTORS	256
+
+
+
+    /*
+     *  OpenPIC Registers are 32 bits and aligned on 128 bit boundaries
+     */
+
+typedef struct _OpenPIC_Reg {
+    u_int Reg;					/* Little endian! */
+    char Pad[0xc];
+} OpenPIC_Reg;
+
+
+    /*
+     *  Per Processor Registers
+     */
+
+typedef struct _OpenPIC_Processor {
+    /*
+     *  Private Shadow Registers (for SLiC backwards compatibility)
+     */
+    u_int IPI0_Dispatch_Shadow;			/* Write Only */
+    char Pad1[0x4];
+    u_int IPI0_Vector_Priority_Shadow;		/* Read/Write */
+    char Pad2[0x34];
+    /*
+     *  Interprocessor Interrupt Command Ports
+     */
+    OpenPIC_Reg _IPI_Dispatch[OPENPIC_NUM_IPI];	/* Write Only */
+    /*
+     *  Current Task Priority Register
+     */
+    OpenPIC_Reg _Current_Task_Priority;		/* Read/Write */
+    char Pad3[0x10];
+    /*
+     *  Interrupt Acknowledge Register
+     */
+    OpenPIC_Reg _Interrupt_Acknowledge;		/* Read Only */
+    /*
+     *  End of Interrupt (EOI) Register
+     */
+    OpenPIC_Reg _EOI;				/* Read/Write */
+    char Pad5[0xf40];
+} OpenPIC_Processor;
+
+
+    /*
+     *  Timer Registers
+     */
+
+typedef struct _OpenPIC_Timer {
+    OpenPIC_Reg _Current_Count;			/* Read Only */
+    OpenPIC_Reg _Base_Count;			/* Read/Write */
+    OpenPIC_Reg _Vector_Priority;		/* Read/Write */
+    OpenPIC_Reg _Destination;			/* Read/Write */
+} OpenPIC_Timer;
+
+
+    /*
+     *  Global Registers
+     */
+
+typedef struct _OpenPIC_Global {
+    /*
+     *  Feature Reporting Registers
+     */
+    OpenPIC_Reg _Feature_Reporting0;		/* Read Only */
+    OpenPIC_Reg _Feature_Reporting1;		/* Future Expansion */
+    /*
+     *  Global Configuration Registers
+     */
+    OpenPIC_Reg _Global_Configuration0;		/* Read/Write */
+    OpenPIC_Reg _Global_Configuration1;		/* Future Expansion */
+    /*
+     *  Vendor Specific Registers
+     */
+    OpenPIC_Reg _Vendor_Specific[4];
+    /*
+     *  Vendor Identification Register
+     */
+    OpenPIC_Reg _Vendor_Identification;		/* Read Only */
+    /*
+     *  Processor Initialization Register
+     */
+    OpenPIC_Reg _Processor_Initialization;	/* Read/Write */
+    /*
+     *  IPI Vector/Priority Registers
+     */
+    OpenPIC_Reg _IPI_Vector_Priority[OPENPIC_NUM_IPI];	/* Read/Write */
+    /*
+     *  Spurious Vector Register
+     */
+    OpenPIC_Reg _Spurious_Vector;		/* Read/Write */
+    /*
+     *  Global Timer Registers
+     */
+    OpenPIC_Reg _Timer_Frequency;		/* Read/Write */
+    OpenPIC_Timer Timer[OPENPIC_NUM_TIMERS];
+    char Pad1[0xee00];
+} OpenPIC_Global;
+
+
+    /*
+     *  Interrupt Source Registers
+     */
+
+typedef struct _OpenPIC_Source {
+    OpenPIC_Reg _Vector_Priority;		/* Read/Write */
+    OpenPIC_Reg _Destination;			/* Read/Write */
+} OpenPIC_Source, *OpenPIC_SourcePtr;
+
+
+    /*
+     *  OpenPIC Register Map
+     */
+
+struct OpenPIC {
+    char Pad1[0x1000];
+    /*
+     *  Global Registers
+     */
+    OpenPIC_Global Global;
+    /*
+     *  Interrupt Source Configuration Registers
+     */
+    OpenPIC_Source Source[OPENPIC_MAX_SOURCES];
+    /*
+     *  Per Processor Registers
+     */
+    OpenPIC_Processor Processor[OPENPIC_MAX_PROCESSORS];
+};
+
+extern volatile struct OpenPIC __iomem *OpenPIC;
+
+
+    /*
+     *  Current Task Priority Register
+     */
+
+#define OPENPIC_CURRENT_TASK_PRIORITY_MASK	0x0000000f
+
+    /*
+     *  Who Am I Register
+     */
+
+#define OPENPIC_WHO_AM_I_ID_MASK		0x0000001f
+
+    /*
+     *  Feature Reporting Register 0
+     */
+
+#define OPENPIC_FEATURE_LAST_SOURCE_MASK	0x07ff0000
+#define OPENPIC_FEATURE_LAST_SOURCE_SHIFT	16
+#define OPENPIC_FEATURE_LAST_PROCESSOR_MASK	0x00001f00
+#define OPENPIC_FEATURE_LAST_PROCESSOR_SHIFT	8
+#define OPENPIC_FEATURE_VERSION_MASK		0x000000ff
+
+    /*
+     *  Global Configuration Register 0
+     */
+
+#define OPENPIC_CONFIG_RESET			0x80000000
+#define OPENPIC_CONFIG_8259_PASSTHROUGH_DISABLE	0x20000000
+#define OPENPIC_CONFIG_BASE_MASK		0x000fffff
+
+    /*
+     *  Global Configuration Register 1
+     *  This is the EICR on EPICs.
+     */
+
+#define OPENPIC_EICR_S_CLK_MASK			0x70000000
+#define OPENPIC_EICR_SIE			0x08000000
+
+    /*
+     *  Vendor Identification Register
+     */
+
+#define OPENPIC_VENDOR_ID_STEPPING_MASK		0x00ff0000
+#define OPENPIC_VENDOR_ID_STEPPING_SHIFT	16
+#define OPENPIC_VENDOR_ID_DEVICE_ID_MASK	0x0000ff00
+#define OPENPIC_VENDOR_ID_DEVICE_ID_SHIFT	8
+#define OPENPIC_VENDOR_ID_VENDOR_ID_MASK	0x000000ff
+
+    /*
+     *  Vector/Priority Registers
+     */
+
+#define OPENPIC_MASK				0x80000000
+#define OPENPIC_ACTIVITY			0x40000000	/* Read Only */
+#define OPENPIC_PRIORITY_MASK			0x000f0000
+#define OPENPIC_PRIORITY_SHIFT			16
+#define OPENPIC_VECTOR_MASK			0x000000ff
+
+
+    /*
+     *  Interrupt Source Registers
+     */
+
+#define OPENPIC_POLARITY_POSITIVE		0x00800000
+#define OPENPIC_POLARITY_NEGATIVE		0x00000000
+#define OPENPIC_POLARITY_MASK			0x00800000
+#define OPENPIC_SENSE_LEVEL			0x00400000
+#define OPENPIC_SENSE_EDGE			0x00000000
+#define OPENPIC_SENSE_MASK			0x00400000
+
+
+    /*
+     *  Timer Registers
+     */
+
+#define OPENPIC_COUNT_MASK			0x7fffffff
+#define OPENPIC_TIMER_TOGGLE			0x80000000
+#define OPENPIC_TIMER_COUNT_INHIBIT		0x80000000
+
+
+    /*
+     *  Aliases to make life simpler
+     */
+
+/* Per Processor Registers */
+#define IPI_Dispatch(i)			_IPI_Dispatch[i].Reg
+#define Current_Task_Priority		_Current_Task_Priority.Reg
+#define Interrupt_Acknowledge		_Interrupt_Acknowledge.Reg
+#define EOI				_EOI.Reg
+
+/* Global Registers */
+#define Feature_Reporting0		_Feature_Reporting0.Reg
+#define Feature_Reporting1		_Feature_Reporting1.Reg
+#define Global_Configuration0		_Global_Configuration0.Reg
+#define Global_Configuration1		_Global_Configuration1.Reg
+#define Vendor_Specific(i)		_Vendor_Specific[i].Reg
+#define Vendor_Identification		_Vendor_Identification.Reg
+#define Processor_Initialization	_Processor_Initialization.Reg
+#define IPI_Vector_Priority(i)		_IPI_Vector_Priority[i].Reg
+#define Spurious_Vector			_Spurious_Vector.Reg
+#define Timer_Frequency			_Timer_Frequency.Reg
+
+/* Timer Registers */
+#define Current_Count			_Current_Count.Reg
+#define Base_Count			_Base_Count.Reg
+#define Vector_Priority			_Vector_Priority.Reg
+#define Destination			_Destination.Reg
+
+/* Interrupt Source Registers */
+#define Vector_Priority			_Vector_Priority.Reg
+#define Destination			_Destination.Reg
+
+#endif /* __KERNEL__ */
+
+#endif /* _LINUX_OPENPIC_H */
diff --git a/arch/ppc/syslib/pci_auto.c b/arch/ppc/syslib/pci_auto.c
new file mode 100644
index 000000000000..d64207c2a972
--- /dev/null
+++ b/arch/ppc/syslib/pci_auto.c
@@ -0,0 +1,517 @@
+/*
+ * arch/ppc/syslib/pci_auto.c
+ *
+ * PCI autoconfiguration library
+ *
+ * Author: Matt Porter <mporter@mvista.com>
+ *
+ * 2001 (c) MontaVista, Software, Inc.  This file is licensed under
+ * the terms of the GNU General Public License version 2.  This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+/*
+ * The CardBus support is very preliminary.  Preallocating space is
+ * the way to go but will require some change in card services to
+ * make it useful.  Eventually this will ensure that we can put
+ * multiple CB bridges behind multiple P2P bridges.  For now, at
+ * least it ensures that we place the CB bridge BAR and assigned
+ * initial bus numbers.  I definitely need to do something about
+ * the lack of 16-bit I/O support. -MDP
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+
+#include <asm/pci-bridge.h>
+
+#define	PCIAUTO_IDE_MODE_MASK		0x05
+
+#undef DEBUG
+
+#ifdef DEBUG
+#define DBG(x...) printk(x)
+#else
+#define DBG(x...)
+#endif /* DEBUG */
+
+static int pciauto_upper_iospc;
+static int pciauto_upper_memspc;
+
+void __init pciauto_setup_bars(struct pci_controller *hose,
+		int current_bus,
+		int pci_devfn,
+		int bar_limit)
+{
+	int bar_response, bar_size, bar_value;
+	int bar, addr_mask;
+	int * upper_limit;
+	int found_mem64 = 0;
+
+	DBG("PCI Autoconfig: Found Bus %d, Device %d, Function %d\n",
+		current_bus, PCI_SLOT(pci_devfn), PCI_FUNC(pci_devfn) );
+
+	for (bar = PCI_BASE_ADDRESS_0; bar <= bar_limit; bar+=4) {
+		/* Tickle the BAR and get the response */
+		early_write_config_dword(hose,
+				current_bus,
+				pci_devfn,
+				bar,
+				0xffffffff);
+		early_read_config_dword(hose,
+				current_bus,
+				pci_devfn,
+				bar,
+				&bar_response);
+
+		/* If BAR is not implemented go to the next BAR */
+		if (!bar_response)
+			continue;
+
+		/* Check the BAR type and set our address mask */
+		if (bar_response & PCI_BASE_ADDRESS_SPACE) {
+			addr_mask = PCI_BASE_ADDRESS_IO_MASK;
+			upper_limit = &pciauto_upper_iospc;
+			DBG("PCI Autoconfig: BAR 0x%x, I/O, ", bar);
+		} else {
+			if ( (bar_response & PCI_BASE_ADDRESS_MEM_TYPE_MASK) ==
+			PCI_BASE_ADDRESS_MEM_TYPE_64)
+				found_mem64 = 1;
+
+			addr_mask = PCI_BASE_ADDRESS_MEM_MASK;	
+			upper_limit = &pciauto_upper_memspc;
+			DBG("PCI Autoconfig: BAR 0x%x, Mem ", bar);
+		}
+
+		/* Calculate requested size */
+		bar_size = ~(bar_response & addr_mask) + 1;
+
+		/* Allocate a base address */
+		bar_value = (*upper_limit - bar_size) & ~(bar_size - 1);
+
+		/* Write it out and update our limit */
+		early_write_config_dword(hose,
+				current_bus,
+				pci_devfn,
+				bar,
+				bar_value);
+
+		*upper_limit = bar_value;
+
+		/*
+		 * If we are a 64-bit decoder then increment to the
+		 * upper 32 bits of the bar and force it to locate
+		 * in the lower 4GB of memory.
+		 */
+		if (found_mem64) {
+			bar += 4;
+			early_write_config_dword(hose,
+					current_bus,
+					pci_devfn,
+					bar,
+					0x00000000);
+			found_mem64 = 0;
+		}
+
+		DBG("size=0x%x, address=0x%x\n",
+			bar_size, bar_value);
+	}
+
+}
+
+void __init pciauto_prescan_setup_bridge(struct pci_controller *hose,
+		int current_bus,
+		int pci_devfn,
+		int sub_bus,
+		int *iosave,
+		int *memsave)
+{
+	/* Configure bus number registers */
+	early_write_config_byte(hose,
+			current_bus,
+			pci_devfn,
+			PCI_PRIMARY_BUS,
+			current_bus);
+	early_write_config_byte(hose,
+			current_bus,
+			pci_devfn,
+			PCI_SECONDARY_BUS,
+			sub_bus + 1);
+	early_write_config_byte(hose,
+			current_bus,
+			pci_devfn,
+			PCI_SUBORDINATE_BUS,
+			0xff);
+
+	/* Round memory allocator to 1MB boundary */
+	pciauto_upper_memspc &= ~(0x100000 - 1);
+	*memsave = pciauto_upper_memspc;
+
+	/* Round I/O allocator to 4KB boundary */
+	pciauto_upper_iospc &= ~(0x1000 - 1);
+	*iosave = pciauto_upper_iospc;
+
+	/* Set up memory and I/O filter limits, assume 32-bit I/O space */
+	early_write_config_word(hose,
+			current_bus,
+			pci_devfn,
+			PCI_MEMORY_LIMIT,
+			((pciauto_upper_memspc - 1) & 0xfff00000) >> 16);
+	early_write_config_byte(hose,
+			current_bus,
+			pci_devfn,
+			PCI_IO_LIMIT,
+			((pciauto_upper_iospc - 1) & 0x0000f000) >> 8);
+	early_write_config_word(hose,
+			current_bus,
+			pci_devfn,
+			PCI_IO_LIMIT_UPPER16,
+			((pciauto_upper_iospc - 1) & 0xffff0000) >> 16);
+
+	/* Zero upper 32 bits of prefetchable base/limit */
+	early_write_config_dword(hose,
+			current_bus,
+			pci_devfn,
+			PCI_PREF_BASE_UPPER32,
+			0);
+	early_write_config_dword(hose,
+			current_bus,
+			pci_devfn,
+			PCI_PREF_LIMIT_UPPER32,
+			0);
+}
+
+void __init pciauto_postscan_setup_bridge(struct pci_controller *hose,
+		int current_bus,
+		int pci_devfn,
+		int sub_bus,
+		int *iosave,
+		int *memsave)
+{
+	int cmdstat;
+
+	/* Configure bus number registers */
+	early_write_config_byte(hose,
+			current_bus,
+			pci_devfn,
+			PCI_SUBORDINATE_BUS,
+			sub_bus);
+
+	/*
+	 * Round memory allocator to 1MB boundary.
+	 * If no space used, allocate minimum.
+	 */
+	pciauto_upper_memspc &= ~(0x100000 - 1);
+	if (*memsave == pciauto_upper_memspc)
+		pciauto_upper_memspc -= 0x00100000;
+
+	early_write_config_word(hose,
+			current_bus,
+			pci_devfn,
+			PCI_MEMORY_BASE,
+			pciauto_upper_memspc >> 16);
+
+	/* Allocate 1MB for pre-fretch */
+	early_write_config_word(hose,
+			current_bus,
+			pci_devfn,
+			PCI_PREF_MEMORY_LIMIT,
+			((pciauto_upper_memspc - 1) & 0xfff00000) >> 16);
+
+	pciauto_upper_memspc -= 0x100000;
+
+	early_write_config_word(hose,
+			current_bus,
+			pci_devfn,
+			PCI_PREF_MEMORY_BASE,
+			pciauto_upper_memspc >> 16);
+
+	/* Round I/O allocator to 4KB boundary */
+	pciauto_upper_iospc &= ~(0x1000 - 1);
+	if (*iosave == pciauto_upper_iospc)
+		pciauto_upper_iospc -= 0x1000;
+
+	early_write_config_byte(hose,
+			current_bus,
+			pci_devfn,
+			PCI_IO_BASE,
+			(pciauto_upper_iospc & 0x0000f000) >> 8);
+	early_write_config_word(hose,
+			current_bus,
+			pci_devfn,
+			PCI_IO_BASE_UPPER16,
+			pciauto_upper_iospc >> 16);
+
+	/* Enable memory and I/O accesses, enable bus master */
+	early_read_config_dword(hose,
+			current_bus,
+			pci_devfn,
+			PCI_COMMAND,
+			&cmdstat);
+	early_write_config_dword(hose,
+			current_bus,
+			pci_devfn,
+			PCI_COMMAND,
+			cmdstat |
+			PCI_COMMAND_IO |
+			PCI_COMMAND_MEMORY |
+			PCI_COMMAND_MASTER);
+}
+
+void __init pciauto_prescan_setup_cardbus_bridge(struct pci_controller *hose,
+		int current_bus,
+		int pci_devfn,
+		int sub_bus,
+		int *iosave,
+		int *memsave)
+{
+	/* Configure bus number registers */
+	early_write_config_byte(hose,
+			current_bus,
+			pci_devfn,
+			PCI_PRIMARY_BUS,
+			current_bus);
+	early_write_config_byte(hose,
+			current_bus,
+			pci_devfn,
+			PCI_SECONDARY_BUS,
+			sub_bus + 1);
+	early_write_config_byte(hose,
+			current_bus,
+			pci_devfn,
+			PCI_SUBORDINATE_BUS,
+			0xff);
+
+	/* Round memory allocator to 4KB boundary */
+	pciauto_upper_memspc &= ~(0x1000 - 1);
+	*memsave = pciauto_upper_memspc;
+
+	/* Round I/O allocator to 4 byte boundary */
+	pciauto_upper_iospc &= ~(0x4 - 1);
+	*iosave = pciauto_upper_iospc;
+
+	/* Set up memory and I/O filter limits, assume 32-bit I/O space */
+	early_write_config_dword(hose,
+			current_bus,
+			pci_devfn,
+			0x20,
+			pciauto_upper_memspc - 1);
+	early_write_config_dword(hose,
+			current_bus,
+			pci_devfn,
+			0x30,
+			pciauto_upper_iospc - 1);
+}
+
+void __init pciauto_postscan_setup_cardbus_bridge(struct pci_controller *hose,
+		int current_bus,
+		int pci_devfn,
+		int sub_bus,
+		int *iosave,
+		int *memsave)
+{
+	int cmdstat;
+
+	/*
+	 * Configure subordinate bus number.  The PCI subsystem
+	 * bus scan will renumber buses (reserving three additional
+	 * for this PCI<->CardBus bridge for the case where a CardBus
+	 * adapter contains a P2P or CB2CB bridge.
+	 */
+	early_write_config_byte(hose,
+			current_bus,
+			pci_devfn,
+			PCI_SUBORDINATE_BUS,
+			sub_bus);
+
+	/*
+	 * Reserve an additional 4MB for mem space and 16KB for
+	 * I/O space.  This should cover any additional space
+	 * requirement of unusual CardBus devices with
+	 * additional bridges that can consume more address space.
+	 *
+	 * Although pcmcia-cs currently will reprogram bridge
+	 * windows, the goal is to add an option to leave them
+	 * alone and use the bridge window ranges as the regions
+	 * that are searched for free resources upon hot-insertion
+	 * of a device.  This will allow a PCI<->CardBus bridge
+	 * configured by this routine to happily live behind a
+	 * P2P bridge in a system.
+	 */
+	pciauto_upper_memspc -= 0x00400000;
+	pciauto_upper_iospc -= 0x00004000;
+
+	/* Round memory allocator to 4KB boundary */
+	pciauto_upper_memspc &= ~(0x1000 - 1);
+
+	early_write_config_dword(hose,
+			current_bus,
+			pci_devfn,
+			0x1c,
+			pciauto_upper_memspc);
+
+	/* Round I/O allocator to 4 byte boundary */
+	pciauto_upper_iospc &= ~(0x4 - 1);
+	early_write_config_dword(hose,
+			current_bus,
+			pci_devfn,
+			0x2c,
+			pciauto_upper_iospc);
+
+	/* Enable memory and I/O accesses, enable bus master */
+	early_read_config_dword(hose,
+			current_bus,
+			pci_devfn,
+			PCI_COMMAND,
+			&cmdstat);
+	early_write_config_dword(hose,
+			current_bus,
+			pci_devfn,
+			PCI_COMMAND,
+			cmdstat |
+			PCI_COMMAND_IO |
+			PCI_COMMAND_MEMORY |
+			PCI_COMMAND_MASTER);
+}
+
+int __init pciauto_bus_scan(struct pci_controller *hose, int current_bus)
+{
+	int sub_bus, pci_devfn, pci_class, cmdstat, found_multi = 0;
+	unsigned short vid;
+	unsigned char header_type;
+
+	/*
+	 * Fetch our I/O and memory space upper boundaries used
+	 * to allocated base addresses on this hose.
+	 */
+	if (current_bus == hose->first_busno) {
+		pciauto_upper_iospc = hose->io_space.end + 1;
+		pciauto_upper_memspc = hose->mem_space.end + 1;
+	}
+
+	sub_bus = current_bus;
+
+	for (pci_devfn = 0; pci_devfn < 0xff; pci_devfn++) {
+		/* Skip our host bridge */
+		if ( (current_bus == hose->first_busno) && (pci_devfn == 0) )
+			continue;
+
+		if (PCI_FUNC(pci_devfn) && !found_multi)
+			continue;
+
+		/* If config space read fails from this device, move on */
+		if (early_read_config_byte(hose,
+				current_bus,
+				pci_devfn,
+				PCI_HEADER_TYPE,
+				&header_type))
+			continue;
+
+		if (!PCI_FUNC(pci_devfn))
+			found_multi = header_type & 0x80;
+
+		early_read_config_word(hose,
+				current_bus,
+				pci_devfn,
+				PCI_VENDOR_ID,
+				&vid);
+
+		if (vid != 0xffff) {
+			early_read_config_dword(hose,
+					current_bus,
+					pci_devfn,
+					PCI_CLASS_REVISION, &pci_class);
+			if ( (pci_class >> 16) == PCI_CLASS_BRIDGE_PCI ) {
+				int iosave, memsave;
+
+				DBG("PCI Autoconfig: Found P2P bridge, device %d\n", PCI_SLOT(pci_devfn));
+				/* Allocate PCI I/O and/or memory space */
+				pciauto_setup_bars(hose,
+						current_bus,
+						pci_devfn,
+						PCI_BASE_ADDRESS_1);
+
+				pciauto_prescan_setup_bridge(hose,
+						current_bus,
+						pci_devfn,
+						sub_bus,
+						&iosave,
+						&memsave);
+				sub_bus = pciauto_bus_scan(hose, sub_bus+1);
+				pciauto_postscan_setup_bridge(hose,
+						current_bus,
+						pci_devfn,
+						sub_bus,
+						&iosave,
+						&memsave);
+			} else if ((pci_class >> 16) == PCI_CLASS_BRIDGE_CARDBUS) {
+				int iosave, memsave;
+
+				DBG("PCI Autoconfig: Found CardBus bridge, device %d function %d\n", PCI_SLOT(pci_devfn), PCI_FUNC(pci_devfn));
+				/* Place CardBus Socket/ExCA registers */
+				pciauto_setup_bars(hose,
+						current_bus,
+						pci_devfn,
+						PCI_BASE_ADDRESS_0);
+
+				pciauto_prescan_setup_cardbus_bridge(hose,
+						current_bus,
+						pci_devfn,
+						sub_bus,
+						&iosave,
+						&memsave);
+				sub_bus = pciauto_bus_scan(hose, sub_bus+1);
+				pciauto_postscan_setup_cardbus_bridge(hose,
+						current_bus,
+						pci_devfn,
+						sub_bus,
+						&iosave,
+						&memsave);
+			} else {
+				if ((pci_class >> 16) == PCI_CLASS_STORAGE_IDE) {
+					unsigned char prg_iface;
+
+					early_read_config_byte(hose,
+							current_bus,
+							pci_devfn,
+							PCI_CLASS_PROG,
+							&prg_iface);
+					if (!(prg_iface & PCIAUTO_IDE_MODE_MASK)) {
+						DBG("PCI Autoconfig: Skipping legacy mode IDE controller\n");
+						continue;
+					}
+				}
+				/* Allocate PCI I/O and/or memory space */
+				pciauto_setup_bars(hose,
+						current_bus,
+						pci_devfn,
+						PCI_BASE_ADDRESS_5);
+
+				/*
+				 * Enable some standard settings
+				 */
+				early_read_config_dword(hose,
+						current_bus,
+						pci_devfn,
+						PCI_COMMAND,
+						&cmdstat);
+				early_write_config_dword(hose,
+						current_bus,
+						pci_devfn,
+						PCI_COMMAND,
+						cmdstat |
+						PCI_COMMAND_IO |
+						PCI_COMMAND_MEMORY |
+						PCI_COMMAND_MASTER);
+				early_write_config_byte(hose,
+						current_bus,
+						pci_devfn,
+						PCI_LATENCY_TIMER,
+						0x80);
+			}
+		}
+	}
+	return sub_bus;
+}
diff --git a/arch/ppc/syslib/ppc403_pic.c b/arch/ppc/syslib/ppc403_pic.c
new file mode 100644
index 000000000000..06cb0af2a58d
--- /dev/null
+++ b/arch/ppc/syslib/ppc403_pic.c
@@ -0,0 +1,127 @@
+/*
+ *
+ *    Copyright (c) 1999 Grant Erickson <grant@lcse.umn.edu>
+ *
+ *    Module name: ppc403_pic.c
+ *
+ *    Description:
+ *      Interrupt controller driver for PowerPC 403-based processors.
+ */
+
+/*
+ * The PowerPC 403 cores' Asynchronous Interrupt Controller (AIC) has
+ * 32 possible interrupts, a majority of which are not implemented on
+ * all cores. There are six configurable, external interrupt pins and
+ * there are eight internal interrupts for the on-chip serial port
+ * (SPU), DMA controller, and JTAG controller.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/signal.h>
+#include <linux/stddef.h>
+
+#include <asm/processor.h>
+#include <asm/system.h>
+#include <asm/irq.h>
+#include <asm/ppc4xx_pic.h>
+
+/* Function Prototypes */
+
+static void ppc403_aic_enable(unsigned int irq);
+static void ppc403_aic_disable(unsigned int irq);
+static void ppc403_aic_disable_and_ack(unsigned int irq);
+
+static struct hw_interrupt_type ppc403_aic = {
+	"403GC AIC",
+	NULL,
+	NULL,
+	ppc403_aic_enable,
+	ppc403_aic_disable,
+	ppc403_aic_disable_and_ack,
+	0
+};
+
+int
+ppc403_pic_get_irq(struct pt_regs *regs)
+{
+	int irq;
+	unsigned long bits;
+
+	/*
+	 * Only report the status of those interrupts that are actually
+	 * enabled.
+	 */
+
+	bits = mfdcr(DCRN_EXISR) & mfdcr(DCRN_EXIER);
+
+	/*
+	 * Walk through the interrupts from highest priority to lowest, and
+	 * report the first pending interrupt found.
+	 * We want PPC, not C bit numbering, so just subtract the ffs()
+	 * result from 32.
+	 */
+	irq = 32 - ffs(bits);
+
+	if (irq == NR_AIC_IRQS)
+		irq = -1;
+
+	return (irq);
+}
+
+static void
+ppc403_aic_enable(unsigned int irq)
+{
+	int bit, word;
+
+	bit = irq & 0x1f;
+	word = irq >> 5;
+
+	ppc_cached_irq_mask[word] |= (1 << (31 - bit));
+	mtdcr(DCRN_EXIER, ppc_cached_irq_mask[word]);
+}
+
+static void
+ppc403_aic_disable(unsigned int irq)
+{
+	int bit, word;
+
+	bit = irq & 0x1f;
+	word = irq >> 5;
+
+	ppc_cached_irq_mask[word] &= ~(1 << (31 - bit));
+	mtdcr(DCRN_EXIER, ppc_cached_irq_mask[word]);
+}
+
+static void
+ppc403_aic_disable_and_ack(unsigned int irq)
+{
+	int bit, word;
+
+	bit = irq & 0x1f;
+	word = irq >> 5;
+
+	ppc_cached_irq_mask[word] &= ~(1 << (31 - bit));
+	mtdcr(DCRN_EXIER, ppc_cached_irq_mask[word]);
+	mtdcr(DCRN_EXISR, (1 << (31 - bit)));
+}
+
+void __init
+ppc4xx_pic_init(void)
+{
+	int i;
+
+	/*
+	 * Disable all external interrupts until they are
+	 * explicity requested.
+	 */
+	ppc_cached_irq_mask[0] = 0;
+
+	mtdcr(DCRN_EXIER, ppc_cached_irq_mask[0]);
+
+	ppc_md.get_irq = ppc403_pic_get_irq;
+
+	for (i = 0; i < NR_IRQS; i++)
+		irq_desc[i].handler = &ppc403_aic;
+}
diff --git a/arch/ppc/syslib/ppc405_pci.c b/arch/ppc/syslib/ppc405_pci.c
new file mode 100644
index 000000000000..81c83bf98df4
--- /dev/null
+++ b/arch/ppc/syslib/ppc405_pci.c
@@ -0,0 +1,177 @@
+/*
+ * Authors: Frank Rowand <frank_rowand@mvista.com>,
+ * Debbie Chu <debbie_chu@mvista.com>, or source@mvista.com
+ * Further modifications by Armin Kuster <akuster@mvista.com>
+ *
+ * 2000 (c) MontaVista, Software, Inc.  This file is licensed under
+ * the terms of the GNU General Public License version 2.  This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ * Based on arch/ppc/kernel/indirect.c, Copyright (C) 1998 Gabriel Paubert.
+ */
+
+#include <linux/pci.h>
+#include <asm/io.h>
+#include <asm/system.h>
+#include <asm/machdep.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <asm/ocp.h>
+#include <asm/ibm4xx.h>
+#include <asm/pci-bridge.h>
+#include <asm/ibm_ocp_pci.h>
+
+
+extern void bios_fixup(struct pci_controller *, struct pcil0_regs *);
+extern int ppc405_map_irq(struct pci_dev *dev, unsigned char idsel,
+			  unsigned char pin);
+
+void
+ppc405_pcibios_fixup_resources(struct pci_dev *dev)
+{
+	int i;
+	unsigned long max_host_addr;
+	unsigned long min_host_addr;
+	struct resource *res;
+
+	/*
+	 * openbios puts some graphics cards in the same range as the host
+	 * controller uses to map to SDRAM.  Fix it.
+	 */
+
+	min_host_addr = 0;
+	max_host_addr = PPC405_PCI_MEM_BASE - 1;
+
+	for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
+		res = dev->resource + i;
+		if (!res->start)
+			continue;
+		if ((res->flags & IORESOURCE_MEM) &&
+		    (((res->start >= min_host_addr)
+		      && (res->start <= max_host_addr))
+		     || ((res->end >= min_host_addr)
+			 && (res->end <= max_host_addr))
+		     || ((res->start < min_host_addr)
+			 && (res->end > max_host_addr))
+		    )
+		    ) {
+
+			/* force pcibios_assign_resources() to assign a new address */
+			res->end -= res->start;
+			res->start = 0;
+		}
+	}
+}
+
+static int
+ppc4xx_exclude_device(unsigned char bus, unsigned char devfn)
+{
+	/* We prevent us from seeing ourselves to avoid having
+	 * the kernel try to remap our BAR #1 and fuck up bus
+	 * master from external PCI devices
+	 */
+	return (bus == 0 && devfn == 0);
+}
+
+void
+ppc4xx_find_bridges(void)
+{
+	struct pci_controller *hose_a;
+	struct pcil0_regs *pcip;
+	unsigned int tmp_addr;
+	unsigned int tmp_size;
+	unsigned int reg_index;
+	unsigned int new_pmm_max = 0;
+	unsigned int new_pmm_min = 0;
+
+	isa_io_base = 0;
+	isa_mem_base = 0;
+	pci_dram_offset = 0;
+
+#if  (PSR_PCI_ARBIT_EN > 1)
+	/* Check if running in slave mode */
+	if ((mfdcr(DCRN_CHPSR) & PSR_PCI_ARBIT_EN) == 0) {
+		printk("Running as PCI slave, kernel PCI disabled !\n");
+		return;
+	}
+#endif
+	/* Setup PCI32 hose */
+	hose_a = pcibios_alloc_controller();
+	if (!hose_a)
+		return;
+	setup_indirect_pci(hose_a, PPC405_PCI_CONFIG_ADDR,
+			   PPC405_PCI_CONFIG_DATA);
+
+	pcip = ioremap(PPC4xx_PCI_LCFG_PADDR, PAGE_SIZE);
+	if (pcip != NULL) {
+
+#if defined(CONFIG_BIOS_FIXUP)
+		bios_fixup(hose_a, pcip);
+#endif
+		new_pmm_min = 0xffffffff;
+		for (reg_index = 0; reg_index < 3; reg_index++) {
+			tmp_size = in_le32(&pcip->pmm[reg_index].ma);	// mask & attrs
+			/* test the enable bit */
+			if ((tmp_size & 0x1) == 0)
+				continue;
+			tmp_addr = in_le32(&pcip->pmm[reg_index].pcila);	// PCI addr
+			if (tmp_addr < PPC405_PCI_PHY_MEM_BASE) {
+				printk(KERN_DEBUG
+				       "Disabling mapping to PCI mem addr 0x%8.8x\n",
+				       tmp_addr);
+				out_le32(&pcip->pmm[reg_index].ma, tmp_size & ~1);	// *_PMMOMA
+				continue;
+			}
+			tmp_addr = in_le32(&pcip->pmm[reg_index].la);	// *_PMMOLA
+			if (tmp_addr < new_pmm_min)
+				new_pmm_min = tmp_addr;
+			tmp_addr = tmp_addr +
+				(0xffffffff - (tmp_size & 0xffffc000));
+			if (tmp_addr > PPC405_PCI_UPPER_MEM) {
+				new_pmm_max = tmp_addr;	// PPC405_PCI_UPPER_MEM
+			} else {
+				new_pmm_max = PPC405_PCI_UPPER_MEM;
+			}
+
+		}		// for
+
+		iounmap(pcip);
+	}
+
+	hose_a->first_busno = 0;
+	hose_a->last_busno = 0xff;
+	hose_a->pci_mem_offset = 0;
+
+	/* Setup bridge memory/IO ranges & resources
+	 * TODO: Handle firmwares setting up a legacy ISA mem base
+	 */
+	hose_a->io_space.start = PPC405_PCI_LOWER_IO;
+	hose_a->io_space.end = PPC405_PCI_UPPER_IO;
+	hose_a->mem_space.start = new_pmm_min;
+	hose_a->mem_space.end = new_pmm_max;
+	hose_a->io_base_phys = PPC405_PCI_PHY_IO_BASE;
+	hose_a->io_base_virt = ioremap(hose_a->io_base_phys, 0x10000);
+	hose_a->io_resource.start = 0;
+	hose_a->io_resource.end = PPC405_PCI_UPPER_IO - PPC405_PCI_LOWER_IO;
+	hose_a->io_resource.flags = IORESOURCE_IO;
+	hose_a->io_resource.name = "PCI I/O";
+	hose_a->mem_resources[0].start = new_pmm_min;
+	hose_a->mem_resources[0].end = new_pmm_max;
+	hose_a->mem_resources[0].flags = IORESOURCE_MEM;
+	hose_a->mem_resources[0].name = "PCI Memory";
+	isa_io_base = (int) hose_a->io_base_virt;
+	isa_mem_base = 0;	/*     ISA not implemented */
+	ISA_DMA_THRESHOLD = 0x00ffffff;	/* ??? ISA not implemented */
+
+	/* Scan busses & initial setup by pci_auto */
+	hose_a->last_busno = pciauto_bus_scan(hose_a, hose_a->first_busno);
+	hose_a->last_busno = 0;
+
+	/* Setup ppc_md */
+	ppc_md.pcibios_fixup = NULL;
+	ppc_md.pci_exclude_device = ppc4xx_exclude_device;
+	ppc_md.pcibios_fixup_resources = ppc405_pcibios_fixup_resources;
+	ppc_md.pci_swizzle = common_swizzle;
+	ppc_md.pci_map_irq = ppc405_map_irq;
+}
diff --git a/arch/ppc/syslib/ppc4xx_dma.c b/arch/ppc/syslib/ppc4xx_dma.c
new file mode 100644
index 000000000000..5015ab99afd2
--- /dev/null
+++ b/arch/ppc/syslib/ppc4xx_dma.c
@@ -0,0 +1,708 @@
+/*
+ * arch/ppc/kernel/ppc4xx_dma.c
+ *
+ * IBM PPC4xx DMA engine core library
+ *
+ * Copyright 2000-2004 MontaVista Software Inc.
+ *
+ * Cleaned up and converted to new DCR access
+ * Matt Porter <mporter@kernel.crashing.org>
+ *
+ * Original code by Armin Kuster <akuster@mvista.com>
+ * and Pete Popov <ppopov@mvista.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ * You should have received a copy of the  GNU General Public License along
+ * with this program; if not, write  to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/miscdevice.h>
+#include <linux/init.h>
+#include <linux/module.h>
+
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/ppc4xx_dma.h>
+
+ppc_dma_ch_t dma_channels[MAX_PPC4xx_DMA_CHANNELS];
+
+int
+ppc4xx_get_dma_status(void)
+{
+	return (mfdcr(DCRN_DMASR));
+}
+
+void
+ppc4xx_set_src_addr(int dmanr, phys_addr_t src_addr)
+{
+	if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
+		printk("set_src_addr: bad channel: %d\n", dmanr);
+		return;
+	}
+
+#ifdef PPC4xx_DMA_64BIT
+	mtdcr(DCRN_DMASAH0 + dmanr*2, (u32)(src_addr >> 32));
+#else
+	mtdcr(DCRN_DMASA0 + dmanr*2, (u32)src_addr);
+#endif
+}
+
+void
+ppc4xx_set_dst_addr(int dmanr, phys_addr_t dst_addr)
+{
+	if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
+		printk("set_dst_addr: bad channel: %d\n", dmanr);
+		return;
+	}
+
+#ifdef PPC4xx_DMA_64BIT
+	mtdcr(DCRN_DMADAH0 + dmanr*2, (u32)(dst_addr >> 32));
+#else
+	mtdcr(DCRN_DMADA0 + dmanr*2, (u32)dst_addr);
+#endif
+}
+
+void
+ppc4xx_enable_dma(unsigned int dmanr)
+{
+	unsigned int control;
+	ppc_dma_ch_t *p_dma_ch = &dma_channels[dmanr];
+	unsigned int status_bits[] = { DMA_CS0 | DMA_TS0 | DMA_CH0_ERR,
+				       DMA_CS1 | DMA_TS1 | DMA_CH1_ERR,
+				       DMA_CS2 | DMA_TS2 | DMA_CH2_ERR,
+				       DMA_CS3 | DMA_TS3 | DMA_CH3_ERR};
+
+	if (p_dma_ch->in_use) {
+		printk("enable_dma: channel %d in use\n", dmanr);
+		return;
+	}
+
+	if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
+		printk("enable_dma: bad channel: %d\n", dmanr);
+		return;
+	}
+
+	if (p_dma_ch->mode == DMA_MODE_READ) {
+		/* peripheral to memory */
+		ppc4xx_set_src_addr(dmanr, 0);
+		ppc4xx_set_dst_addr(dmanr, p_dma_ch->addr);
+	} else if (p_dma_ch->mode == DMA_MODE_WRITE) {
+		/* memory to peripheral */
+		ppc4xx_set_src_addr(dmanr, p_dma_ch->addr);
+		ppc4xx_set_dst_addr(dmanr, 0);
+	}
+
+	/* for other xfer modes, the addresses are already set */
+	control = mfdcr(DCRN_DMACR0 + (dmanr * 0x8));
+
+	control &= ~(DMA_TM_MASK | DMA_TD);	/* clear all mode bits */
+	if (p_dma_ch->mode == DMA_MODE_MM) {
+		/* software initiated memory to memory */
+		control |= DMA_ETD_OUTPUT | DMA_TCE_ENABLE;
+	}
+
+	mtdcr(DCRN_DMACR0 + (dmanr * 0x8), control);
+
+	/*
+	 * Clear the CS, TS, RI bits for the channel from DMASR.  This
+	 * has been observed to happen correctly only after the mode and
+	 * ETD/DCE bits in DMACRx are set above.  Must do this before
+	 * enabling the channel.
+	 */
+
+	mtdcr(DCRN_DMASR, status_bits[dmanr]);
+
+	/*
+	 * For device-paced transfers, Terminal Count Enable apparently
+	 * must be on, and this must be turned on after the mode, etc.
+	 * bits are cleared above (at least on Redwood-6).
+	 */
+
+	if ((p_dma_ch->mode == DMA_MODE_MM_DEVATDST) ||
+	    (p_dma_ch->mode == DMA_MODE_MM_DEVATSRC))
+		control |= DMA_TCE_ENABLE;
+
+	/*
+	 * Now enable the channel.
+	 */
+
+	control |= (p_dma_ch->mode | DMA_CE_ENABLE);
+
+	mtdcr(DCRN_DMACR0 + (dmanr * 0x8), control);
+
+	p_dma_ch->in_use = 1;
+}
+
+void
+ppc4xx_disable_dma(unsigned int dmanr)
+{
+	unsigned int control;
+	ppc_dma_ch_t *p_dma_ch = &dma_channels[dmanr];
+
+	if (!p_dma_ch->in_use) {
+		printk("disable_dma: channel %d not in use\n", dmanr);
+		return;
+	}
+
+	if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
+		printk("disable_dma: bad channel: %d\n", dmanr);
+		return;
+	}
+
+	control = mfdcr(DCRN_DMACR0 + (dmanr * 0x8));
+	control &= ~DMA_CE_ENABLE;
+	mtdcr(DCRN_DMACR0 + (dmanr * 0x8), control);
+
+	p_dma_ch->in_use = 0;
+}
+
+/*
+ * Sets the dma mode for single DMA transfers only.
+ * For scatter/gather transfers, the mode is passed to the
+ * alloc_dma_handle() function as one of the parameters.
+ *
+ * The mode is simply saved and used later.  This allows
+ * the driver to call set_dma_mode() and set_dma_addr() in
+ * any order.
+ *
+ * Valid mode values are:
+ *
+ * DMA_MODE_READ          peripheral to memory
+ * DMA_MODE_WRITE         memory to peripheral
+ * DMA_MODE_MM            memory to memory
+ * DMA_MODE_MM_DEVATSRC   device-paced memory to memory, device at src
+ * DMA_MODE_MM_DEVATDST   device-paced memory to memory, device at dst
+ */
+int
+ppc4xx_set_dma_mode(unsigned int dmanr, unsigned int mode)
+{
+	ppc_dma_ch_t *p_dma_ch = &dma_channels[dmanr];
+
+	if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
+		printk("set_dma_mode: bad channel 0x%x\n", dmanr);
+		return DMA_STATUS_BAD_CHANNEL;
+	}
+
+	p_dma_ch->mode = mode;
+
+	return DMA_STATUS_GOOD;
+}
+
+/*
+ * Sets the DMA Count register. Note that 'count' is in bytes.
+ * However, the DMA Count register counts the number of "transfers",
+ * where each transfer is equal to the bus width.  Thus, count
+ * MUST be a multiple of the bus width.
+ */
+void
+ppc4xx_set_dma_count(unsigned int dmanr, unsigned int count)
+{
+	ppc_dma_ch_t *p_dma_ch = &dma_channels[dmanr];
+
+#ifdef DEBUG_4xxDMA
+	{
+		int error = 0;
+		switch (p_dma_ch->pwidth) {
+		case PW_8:
+			break;
+		case PW_16:
+			if (count & 0x1)
+				error = 1;
+			break;
+		case PW_32:
+			if (count & 0x3)
+				error = 1;
+			break;
+		case PW_64:
+			if (count & 0x7)
+				error = 1;
+			break;
+		default:
+			printk("set_dma_count: invalid bus width: 0x%x\n",
+			       p_dma_ch->pwidth);
+			return;
+		}
+		if (error)
+			printk
+			    ("Warning: set_dma_count count 0x%x bus width %d\n",
+			     count, p_dma_ch->pwidth);
+	}
+#endif
+
+	count = count >> p_dma_ch->shift;
+
+	mtdcr(DCRN_DMACT0 + (dmanr * 0x8), count);
+}
+
+/*
+ *   Returns the number of bytes left to be transfered.
+ *   After a DMA transfer, this should return zero.
+ *   Reading this while a DMA transfer is still in progress will return
+ *   unpredictable results.
+ */
+int
+ppc4xx_get_dma_residue(unsigned int dmanr)
+{
+	unsigned int count;
+	ppc_dma_ch_t *p_dma_ch = &dma_channels[dmanr];
+
+	if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
+		printk("ppc4xx_get_dma_residue: bad channel 0x%x\n", dmanr);
+		return DMA_STATUS_BAD_CHANNEL;
+	}
+
+	count = mfdcr(DCRN_DMACT0 + (dmanr * 0x8));
+
+	return (count << p_dma_ch->shift);
+}
+
+/*
+ * Sets the DMA address for a memory to peripheral or peripheral
+ * to memory transfer.  The address is just saved in the channel
+ * structure for now and used later in enable_dma().
+ */
+void
+ppc4xx_set_dma_addr(unsigned int dmanr, phys_addr_t addr)
+{
+	ppc_dma_ch_t *p_dma_ch = &dma_channels[dmanr];
+
+	if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
+		printk("ppc4xx_set_dma_addr: bad channel: %d\n", dmanr);
+		return;
+	}
+
+#ifdef DEBUG_4xxDMA
+	{
+		int error = 0;
+		switch (p_dma_ch->pwidth) {
+		case PW_8:
+			break;
+		case PW_16:
+			if ((unsigned) addr & 0x1)
+				error = 1;
+			break;
+		case PW_32:
+			if ((unsigned) addr & 0x3)
+				error = 1;
+			break;
+		case PW_64:
+			if ((unsigned) addr & 0x7)
+				error = 1;
+			break;
+		default:
+			printk("ppc4xx_set_dma_addr: invalid bus width: 0x%x\n",
+			       p_dma_ch->pwidth);
+			return;
+		}
+		if (error)
+			printk("Warning: ppc4xx_set_dma_addr addr 0x%x bus width %d\n",
+			       addr, p_dma_ch->pwidth);
+	}
+#endif
+
+	/* save dma address and program it later after we know the xfer mode */
+	p_dma_ch->addr = addr;
+}
+
+/*
+ * Sets both DMA addresses for a memory to memory transfer.
+ * For memory to peripheral or peripheral to memory transfers
+ * the function set_dma_addr() should be used instead.
+ */
+void
+ppc4xx_set_dma_addr2(unsigned int dmanr, phys_addr_t src_dma_addr,
+		     phys_addr_t dst_dma_addr)
+{
+	if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
+		printk("ppc4xx_set_dma_addr2: bad channel: %d\n", dmanr);
+		return;
+	}
+
+#ifdef DEBUG_4xxDMA
+	{
+		ppc_dma_ch_t *p_dma_ch = &dma_channels[dmanr];
+		int error = 0;
+		switch (p_dma_ch->pwidth) {
+			case PW_8:
+				break;
+			case PW_16:
+				if (((unsigned) src_dma_addr & 0x1) ||
+						((unsigned) dst_dma_addr & 0x1)
+				   )
+					error = 1;
+				break;
+			case PW_32:
+				if (((unsigned) src_dma_addr & 0x3) ||
+						((unsigned) dst_dma_addr & 0x3)
+				   )
+					error = 1;
+				break;
+			case PW_64:
+				if (((unsigned) src_dma_addr & 0x7) ||
+						((unsigned) dst_dma_addr & 0x7)
+				   )
+					error = 1;
+				break;
+			default:
+				printk("ppc4xx_set_dma_addr2: invalid bus width: 0x%x\n",
+						p_dma_ch->pwidth);
+				return;
+		}
+		if (error)
+			printk
+				("Warning: ppc4xx_set_dma_addr2 src 0x%x dst 0x%x bus width %d\n",
+				 src_dma_addr, dst_dma_addr, p_dma_ch->pwidth);
+	}
+#endif
+
+	ppc4xx_set_src_addr(dmanr, src_dma_addr);
+	ppc4xx_set_dst_addr(dmanr, dst_dma_addr);
+}
+
+/*
+ * Enables the channel interrupt.
+ *
+ * If performing a scatter/gatter transfer, this function
+ * MUST be called before calling alloc_dma_handle() and building
+ * the sgl list.  Otherwise, interrupts will not be enabled, if
+ * they were previously disabled.
+ */
+int
+ppc4xx_enable_dma_interrupt(unsigned int dmanr)
+{
+	unsigned int control;
+	ppc_dma_ch_t *p_dma_ch = &dma_channels[dmanr];
+
+	if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
+		printk("ppc4xx_enable_dma_interrupt: bad channel: %d\n", dmanr);
+		return DMA_STATUS_BAD_CHANNEL;
+	}
+
+	p_dma_ch->int_enable = 1;
+
+	control = mfdcr(DCRN_DMACR0 + (dmanr * 0x8));
+	control |= DMA_CIE_ENABLE;	/* Channel Interrupt Enable */
+	mtdcr(DCRN_DMACR0 + (dmanr * 0x8), control);
+
+	return DMA_STATUS_GOOD;
+}
+
+/*
+ * Disables the channel interrupt.
+ *
+ * If performing a scatter/gatter transfer, this function
+ * MUST be called before calling alloc_dma_handle() and building
+ * the sgl list.  Otherwise, interrupts will not be disabled, if
+ * they were previously enabled.
+ */
+int
+ppc4xx_disable_dma_interrupt(unsigned int dmanr)
+{
+	unsigned int control;
+	ppc_dma_ch_t *p_dma_ch = &dma_channels[dmanr];
+
+	if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
+		printk("ppc4xx_disable_dma_interrupt: bad channel: %d\n", dmanr);
+		return DMA_STATUS_BAD_CHANNEL;
+	}
+
+	p_dma_ch->int_enable = 0;
+
+	control = mfdcr(DCRN_DMACR0 + (dmanr * 0x8));
+	control &= ~DMA_CIE_ENABLE;	/* Channel Interrupt Enable */
+	mtdcr(DCRN_DMACR0 + (dmanr * 0x8), control);
+
+	return DMA_STATUS_GOOD;
+}
+
+/*
+ * Configures a DMA channel, including the peripheral bus width, if a
+ * peripheral is attached to the channel, the polarity of the DMAReq and
+ * DMAAck signals, etc.  This information should really be setup by the boot
+ * code, since most likely the configuration won't change dynamically.
+ * If the kernel has to call this function, it's recommended that it's
+ * called from platform specific init code.  The driver should not need to
+ * call this function.
+ */
+int
+ppc4xx_init_dma_channel(unsigned int dmanr, ppc_dma_ch_t * p_init)
+{
+	unsigned int polarity;
+	uint32_t control = 0;
+	ppc_dma_ch_t *p_dma_ch = &dma_channels[dmanr];
+
+	DMA_MODE_READ = (unsigned long) DMA_TD;	/* Peripheral to Memory */
+	DMA_MODE_WRITE = 0;	/* Memory to Peripheral */
+
+	if (!p_init) {
+		printk("ppc4xx_init_dma_channel: NULL p_init\n");
+		return DMA_STATUS_NULL_POINTER;
+	}
+
+	if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
+		printk("ppc4xx_init_dma_channel: bad channel %d\n", dmanr);
+		return DMA_STATUS_BAD_CHANNEL;
+	}
+
+#if DCRN_POL > 0
+	polarity = mfdcr(DCRN_POL);
+#else
+	polarity = 0;
+#endif
+
+	/* Setup the control register based on the values passed to
+	 * us in p_init.  Then, over-write the control register with this
+	 * new value.
+	 */
+	control |= SET_DMA_CONTROL;
+
+	/* clear all polarity signals and then "or" in new signal levels */
+	polarity &= ~GET_DMA_POLARITY(dmanr);
+	polarity |= p_init->polarity;
+#if DCRN_POL > 0
+	mtdcr(DCRN_POL, polarity);
+#endif
+	mtdcr(DCRN_DMACR0 + (dmanr * 0x8), control);
+
+	/* save these values in our dma channel structure */
+	memcpy(p_dma_ch, p_init, sizeof (ppc_dma_ch_t));
+
+	/*
+	 * The peripheral width values written in the control register are:
+	 *   PW_8                 0
+	 *   PW_16                1
+	 *   PW_32                2
+	 *   PW_64                3
+	 *
+	 *   Since the DMA count register takes the number of "transfers",
+	 *   we need to divide the count sent to us in certain
+	 *   functions by the appropriate number.  It so happens that our
+	 *   right shift value is equal to the peripheral width value.
+	 */
+	p_dma_ch->shift = p_init->pwidth;
+
+	/*
+	 * Save the control word for easy access.
+	 */
+	p_dma_ch->control = control;
+
+	mtdcr(DCRN_DMASR, 0xffffffff);	/* clear status register */
+	return DMA_STATUS_GOOD;
+}
+
+/*
+ * This function returns the channel configuration.
+ */
+int
+ppc4xx_get_channel_config(unsigned int dmanr, ppc_dma_ch_t * p_dma_ch)
+{
+	unsigned int polarity;
+	unsigned int control;
+
+	if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
+		printk("ppc4xx_get_channel_config: bad channel %d\n", dmanr);
+		return DMA_STATUS_BAD_CHANNEL;
+	}
+
+	memcpy(p_dma_ch, &dma_channels[dmanr], sizeof (ppc_dma_ch_t));
+
+#if DCRN_POL > 0
+	polarity = mfdcr(DCRN_POL);
+#else
+	polarity = 0;
+#endif
+
+	p_dma_ch->polarity = polarity & GET_DMA_POLARITY(dmanr);
+	control = mfdcr(DCRN_DMACR0 + (dmanr * 0x8));
+
+	p_dma_ch->cp = GET_DMA_PRIORITY(control);
+	p_dma_ch->pwidth = GET_DMA_PW(control);
+	p_dma_ch->psc = GET_DMA_PSC(control);
+	p_dma_ch->pwc = GET_DMA_PWC(control);
+	p_dma_ch->phc = GET_DMA_PHC(control);
+	p_dma_ch->ce = GET_DMA_CE_ENABLE(control);
+	p_dma_ch->int_enable = GET_DMA_CIE_ENABLE(control);
+	p_dma_ch->shift = GET_DMA_PW(control);
+
+#ifdef CONFIG_PPC4xx_EDMA
+	p_dma_ch->pf = GET_DMA_PREFETCH(control);
+#else
+	p_dma_ch->ch_enable = GET_DMA_CH(control);
+	p_dma_ch->ece_enable = GET_DMA_ECE(control);
+	p_dma_ch->tcd_disable = GET_DMA_TCD(control);
+#endif
+	return DMA_STATUS_GOOD;
+}
+
+/*
+ * Sets the priority for the DMA channel dmanr.
+ * Since this is setup by the hardware init function, this function
+ * can be used to dynamically change the priority of a channel.
+ *
+ * Acceptable priorities:
+ *
+ * PRIORITY_LOW
+ * PRIORITY_MID_LOW
+ * PRIORITY_MID_HIGH
+ * PRIORITY_HIGH
+ *
+ */
+int
+ppc4xx_set_channel_priority(unsigned int dmanr, unsigned int priority)
+{
+	unsigned int control;
+
+	if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
+		printk("ppc4xx_set_channel_priority: bad channel %d\n", dmanr);
+		return DMA_STATUS_BAD_CHANNEL;
+	}
+
+	if ((priority != PRIORITY_LOW) &&
+	    (priority != PRIORITY_MID_LOW) &&
+	    (priority != PRIORITY_MID_HIGH) && (priority != PRIORITY_HIGH)) {
+		printk("ppc4xx_set_channel_priority: bad priority: 0x%x\n", priority);
+	}
+
+	control = mfdcr(DCRN_DMACR0 + (dmanr * 0x8));
+	control |= SET_DMA_PRIORITY(priority);
+	mtdcr(DCRN_DMACR0 + (dmanr * 0x8), control);
+
+	return DMA_STATUS_GOOD;
+}
+
+/*
+ * Returns the width of the peripheral attached to this channel. This assumes
+ * that someone who knows the hardware configuration, boot code or some other
+ * init code, already set the width.
+ *
+ * The return value is one of:
+ *   PW_8
+ *   PW_16
+ *   PW_32
+ *   PW_64
+ *
+ *   The function returns 0 on error.
+ */
+unsigned int
+ppc4xx_get_peripheral_width(unsigned int dmanr)
+{
+	unsigned int control;
+
+	if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
+		printk("ppc4xx_get_peripheral_width: bad channel %d\n", dmanr);
+		return DMA_STATUS_BAD_CHANNEL;
+	}
+
+	control = mfdcr(DCRN_DMACR0 + (dmanr * 0x8));
+
+	return (GET_DMA_PW(control));
+}
+
+/*
+ * Clears the channel status bits
+ */
+int
+ppc4xx_clr_dma_status(unsigned int dmanr)
+{
+	if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
+		printk(KERN_ERR "ppc4xx_clr_dma_status: bad channel: %d\n", dmanr);
+		return DMA_STATUS_BAD_CHANNEL;
+	}
+	mtdcr(DCRN_DMASR, ((u32)DMA_CH0_ERR | (u32)DMA_CS0 | (u32)DMA_TS0) >> dmanr);
+	return DMA_STATUS_GOOD;
+}
+
+/*
+ * Enables the burst on the channel (BTEN bit in the control/count register)
+ * Note:
+ * For scatter/gather dma, this function MUST be called before the
+ * ppc4xx_alloc_dma_handle() func as the chan count register is copied into the
+ * sgl list and used as each sgl element is added.
+ */
+int
+ppc4xx_enable_burst(unsigned int dmanr)
+{
+	unsigned int ctc;
+	if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
+		printk(KERN_ERR "ppc4xx_enable_burst: bad channel: %d\n", dmanr);
+		return DMA_STATUS_BAD_CHANNEL;
+	}
+        ctc = mfdcr(DCRN_DMACT0 + (dmanr * 0x8)) | DMA_CTC_BTEN;
+	mtdcr(DCRN_DMACT0 + (dmanr * 0x8), ctc);
+	return DMA_STATUS_GOOD;
+}
+/*
+ * Disables the burst on the channel (BTEN bit in the control/count register)
+ * Note:
+ * For scatter/gather dma, this function MUST be called before the
+ * ppc4xx_alloc_dma_handle() func as the chan count register is copied into the
+ * sgl list and used as each sgl element is added.
+ */
+int
+ppc4xx_disable_burst(unsigned int dmanr)
+{
+	unsigned int ctc;
+	if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
+		printk(KERN_ERR "ppc4xx_disable_burst: bad channel: %d\n", dmanr);
+		return DMA_STATUS_BAD_CHANNEL;
+	}
+	ctc = mfdcr(DCRN_DMACT0 + (dmanr * 0x8)) &~ DMA_CTC_BTEN;
+	mtdcr(DCRN_DMACT0 + (dmanr * 0x8), ctc);
+	return DMA_STATUS_GOOD;
+}
+/*
+ * Sets the burst size (number of peripheral widths) for the channel
+ * (BSIZ bits in the control/count register))
+ * must be one of:
+ *    DMA_CTC_BSIZ_2
+ *    DMA_CTC_BSIZ_4
+ *    DMA_CTC_BSIZ_8
+ *    DMA_CTC_BSIZ_16
+ * Note:
+ * For scatter/gather dma, this function MUST be called before the
+ * ppc4xx_alloc_dma_handle() func as the chan count register is copied into the
+ * sgl list and used as each sgl element is added.
+ */
+int
+ppc4xx_set_burst_size(unsigned int dmanr, unsigned int bsize)
+{
+	unsigned int ctc;
+	if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
+		printk(KERN_ERR "ppc4xx_set_burst_size: bad channel: %d\n", dmanr);
+		return DMA_STATUS_BAD_CHANNEL;
+	}
+	ctc = mfdcr(DCRN_DMACT0 + (dmanr * 0x8)) &~ DMA_CTC_BSIZ_MSK;
+	ctc |= (bsize & DMA_CTC_BSIZ_MSK);
+	mtdcr(DCRN_DMACT0 + (dmanr * 0x8), ctc);
+	return DMA_STATUS_GOOD;
+}
+
+EXPORT_SYMBOL(ppc4xx_init_dma_channel);
+EXPORT_SYMBOL(ppc4xx_get_channel_config);
+EXPORT_SYMBOL(ppc4xx_set_channel_priority);
+EXPORT_SYMBOL(ppc4xx_get_peripheral_width);
+EXPORT_SYMBOL(dma_channels);
+EXPORT_SYMBOL(ppc4xx_set_src_addr);
+EXPORT_SYMBOL(ppc4xx_set_dst_addr);
+EXPORT_SYMBOL(ppc4xx_set_dma_addr);
+EXPORT_SYMBOL(ppc4xx_set_dma_addr2);
+EXPORT_SYMBOL(ppc4xx_enable_dma);
+EXPORT_SYMBOL(ppc4xx_disable_dma);
+EXPORT_SYMBOL(ppc4xx_set_dma_mode);
+EXPORT_SYMBOL(ppc4xx_set_dma_count);
+EXPORT_SYMBOL(ppc4xx_get_dma_residue);
+EXPORT_SYMBOL(ppc4xx_enable_dma_interrupt);
+EXPORT_SYMBOL(ppc4xx_disable_dma_interrupt);
+EXPORT_SYMBOL(ppc4xx_get_dma_status);
+EXPORT_SYMBOL(ppc4xx_clr_dma_status);
+EXPORT_SYMBOL(ppc4xx_enable_burst);
+EXPORT_SYMBOL(ppc4xx_disable_burst);
+EXPORT_SYMBOL(ppc4xx_set_burst_size);
diff --git a/arch/ppc/syslib/ppc4xx_kgdb.c b/arch/ppc/syslib/ppc4xx_kgdb.c
new file mode 100644
index 000000000000..fe8668bf8137
--- /dev/null
+++ b/arch/ppc/syslib/ppc4xx_kgdb.c
@@ -0,0 +1,124 @@
+#include <linux/config.h>
+#include <linux/types.h>
+#include <asm/ibm4xx.h>
+#include <linux/kernel.h>
+
+
+
+#define LSR_DR		0x01 /* Data ready */
+#define LSR_OE		0x02 /* Overrun */
+#define LSR_PE		0x04 /* Parity error */
+#define LSR_FE		0x08 /* Framing error */
+#define LSR_BI		0x10 /* Break */
+#define LSR_THRE	0x20 /* Xmit holding register empty */
+#define LSR_TEMT	0x40 /* Xmitter empty */
+#define LSR_ERR		0x80 /* Error */
+
+#include <platforms/4xx/ibm_ocp.h>
+
+extern struct NS16550* COM_PORTS[];
+#ifndef NULL
+#define NULL 0x00
+#endif
+
+static volatile struct NS16550 *kgdb_debugport = NULL;
+
+volatile struct NS16550 *
+NS16550_init(int chan)
+{
+	volatile struct NS16550 *com_port;
+	int quot;
+#ifdef BASE_BAUD
+	quot = BASE_BAUD / 9600;
+#else
+	quot = 0x000c; /* 0xc = 9600 baud (on a pc) */
+#endif
+
+	com_port = (struct NS16550 *) COM_PORTS[chan];
+
+	com_port->lcr = 0x00;
+	com_port->ier = 0xFF;
+	com_port->ier = 0x00;
+	com_port->lcr = com_port->lcr | 0x80; /* Access baud rate */
+	com_port->dll = ( quot & 0x00ff ); /* 0xc = 9600 baud */
+	com_port->dlm = ( quot & 0xff00 ) >> 8;
+	com_port->lcr = 0x03; /* 8 data, 1 stop, no parity */
+	com_port->mcr = 0x00; /* RTS/DTR */
+	com_port->fcr = 0x07; /* Clear & enable FIFOs */
+
+	return( com_port );
+}
+
+
+void
+NS16550_putc(volatile struct NS16550 *com_port, unsigned char c)
+{
+	while ((com_port->lsr & LSR_THRE) == 0)
+		;
+	com_port->thr = c;
+	return;
+}
+
+unsigned char
+NS16550_getc(volatile struct NS16550 *com_port)
+{
+	while ((com_port->lsr & LSR_DR) == 0)
+		;
+	return (com_port->rbr);
+}
+
+unsigned char
+NS16550_tstc(volatile struct NS16550 *com_port)
+{
+	return ((com_port->lsr & LSR_DR) != 0);
+}
+
+
+#if defined(CONFIG_KGDB_TTYS0)
+#define KGDB_PORT 0
+#elif defined(CONFIG_KGDB_TTYS1)
+#define KGDB_PORT 1
+#elif defined(CONFIG_KGDB_TTYS2)
+#define KGDB_PORT 2
+#elif defined(CONFIG_KGDB_TTYS3)
+#define KGDB_PORT 3
+#else
+#error "invalid kgdb_tty port"
+#endif
+
+void putDebugChar( unsigned char c )
+{
+	if ( kgdb_debugport == NULL )
+		kgdb_debugport = NS16550_init(KGDB_PORT);
+	NS16550_putc( kgdb_debugport, c );
+}
+
+int getDebugChar( void )
+{
+	if (kgdb_debugport == NULL)
+		kgdb_debugport = NS16550_init(KGDB_PORT);
+
+	return(NS16550_getc(kgdb_debugport));
+}
+
+void kgdb_interruptible(int enable)
+{
+	return;
+}
+
+void putDebugString(char* str)
+{
+	while (*str != '\0') {
+		putDebugChar(*str);
+		str++;
+	}
+	putDebugChar('\r');
+	return;
+}
+
+void
+kgdb_map_scc(void)
+{
+	printk("kgdb init \n");
+	kgdb_debugport = NS16550_init(KGDB_PORT);
+}
diff --git a/arch/ppc/syslib/ppc4xx_pic.c b/arch/ppc/syslib/ppc4xx_pic.c
new file mode 100644
index 000000000000..08f06dd17e7b
--- /dev/null
+++ b/arch/ppc/syslib/ppc4xx_pic.c
@@ -0,0 +1,244 @@
+/*
+ * arch/ppc/syslib/ppc4xx_pic.c
+ *
+ * Interrupt controller driver for PowerPC 4xx-based processors.
+ *
+ * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
+ * Copyright (c) 2004, 2005 Zultys Technologies
+ *
+ * Based on original code by
+ *    Copyright (c) 1999 Grant Erickson <grant@lcse.umn.edu>
+ *    Armin Custer <akuster@mvista.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+*/
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/signal.h>
+#include <linux/stddef.h>
+
+#include <asm/processor.h>
+#include <asm/system.h>
+#include <asm/irq.h>
+#include <asm/ppc4xx_pic.h>
+
+/* See comment in include/arch-ppc/ppc4xx_pic.h
+ * for more info about these two variables
+ */
+extern struct ppc4xx_uic_settings ppc4xx_core_uic_cfg[NR_UICS]
+    __attribute__ ((weak));
+extern unsigned char ppc4xx_uic_ext_irq_cfg[] __attribute__ ((weak));
+
+#define IRQ_MASK_UIC0(irq)		(1 << (31 - (irq)))
+#define IRQ_MASK_UICx(irq)		(1 << (31 - ((irq) & 0x1f)))
+#define IRQ_MASK_UIC1(irq)		IRQ_MASK_UICx(irq)
+#define IRQ_MASK_UIC2(irq)		IRQ_MASK_UICx(irq)
+
+#define UIC_HANDLERS(n)							\
+static void ppc4xx_uic##n##_enable(unsigned int irq)			\
+{									\
+	ppc_cached_irq_mask[n] |= IRQ_MASK_UIC##n(irq);			\
+	mtdcr(DCRN_UIC_ER(UIC##n), ppc_cached_irq_mask[n]);		\
+}									\
+									\
+static void ppc4xx_uic##n##_disable(unsigned int irq)			\
+{									\
+	ppc_cached_irq_mask[n] &= ~IRQ_MASK_UIC##n(irq);		\
+	mtdcr(DCRN_UIC_ER(UIC##n), ppc_cached_irq_mask[n]);		\
+	ACK_UIC##n##_PARENT						\
+}									\
+									\
+static void ppc4xx_uic##n##_ack(unsigned int irq)			\
+{									\
+	u32 mask = IRQ_MASK_UIC##n(irq);				\
+	ppc_cached_irq_mask[n] &= ~mask;				\
+	mtdcr(DCRN_UIC_ER(UIC##n), ppc_cached_irq_mask[n]);		\
+	mtdcr(DCRN_UIC_SR(UIC##n), mask);				\
+	ACK_UIC##n##_PARENT						\
+}									\
+									\
+static void ppc4xx_uic##n##_end(unsigned int irq)			\
+{									\
+	unsigned int status = irq_desc[irq].status;			\
+	u32 mask = IRQ_MASK_UIC##n(irq);				\
+	if (status & IRQ_LEVEL) {					\
+		mtdcr(DCRN_UIC_SR(UIC##n), mask);			\
+		ACK_UIC##n##_PARENT					\
+	}								\
+	if (!(status & (IRQ_DISABLED | IRQ_INPROGRESS))) {		\
+		ppc_cached_irq_mask[n] |= mask;				\
+		mtdcr(DCRN_UIC_ER(UIC##n), ppc_cached_irq_mask[n]);	\
+	}								\
+}
+
+#define DECLARE_UIC(n)							\
+{									\
+	.typename 	= "UIC"#n,					\
+	.enable 	= ppc4xx_uic##n##_enable,			\
+	.disable 	= ppc4xx_uic##n##_disable,			\
+	.ack 		= ppc4xx_uic##n##_ack,				\
+	.end 		= ppc4xx_uic##n##_end,				\
+}									\
+
+#if NR_UICS == 3
+#define ACK_UIC0_PARENT	mtdcr(DCRN_UIC_SR(UICB), UICB_UIC0NC);
+#define ACK_UIC1_PARENT	mtdcr(DCRN_UIC_SR(UICB), UICB_UIC1NC);
+#define ACK_UIC2_PARENT	mtdcr(DCRN_UIC_SR(UICB), UICB_UIC2NC);
+UIC_HANDLERS(0);
+UIC_HANDLERS(1);
+UIC_HANDLERS(2);
+
+static int ppc4xx_pic_get_irq(struct pt_regs *regs)
+{
+	u32 uicb = mfdcr(DCRN_UIC_MSR(UICB));
+	if (uicb & UICB_UIC0NC)
+		return 32 - ffs(mfdcr(DCRN_UIC_MSR(UIC0)));
+	else if (uicb & UICB_UIC1NC)
+		return 64 - ffs(mfdcr(DCRN_UIC_MSR(UIC1)));
+	else if (uicb & UICB_UIC2NC)
+		return 96 - ffs(mfdcr(DCRN_UIC_MSR(UIC2)));
+	else
+		return -1;
+}
+
+static void __init ppc4xx_pic_impl_init(void)
+{
+	/* Configure Base UIC */
+	mtdcr(DCRN_UIC_CR(UICB), 0);
+	mtdcr(DCRN_UIC_TR(UICB), 0);
+	mtdcr(DCRN_UIC_PR(UICB), 0xffffffff);
+	mtdcr(DCRN_UIC_SR(UICB), 0xffffffff);
+	mtdcr(DCRN_UIC_ER(UICB), UICB_UIC0NC | UICB_UIC1NC | UICB_UIC2NC);
+}
+
+#elif NR_UICS == 2
+#define ACK_UIC0_PARENT
+#define ACK_UIC1_PARENT	mtdcr(DCRN_UIC_SR(UIC0), UIC0_UIC1NC);
+UIC_HANDLERS(0);
+UIC_HANDLERS(1);
+
+static int ppc4xx_pic_get_irq(struct pt_regs *regs)
+{
+	u32 uic0 = mfdcr(DCRN_UIC_MSR(UIC0));
+	if (uic0 & UIC0_UIC1NC)
+		return 64 - ffs(mfdcr(DCRN_UIC_MSR(UIC1)));
+	else
+		return uic0 ? 32 - ffs(uic0) : -1;
+}
+
+static void __init ppc4xx_pic_impl_init(void)
+{
+	/* Enable cascade interrupt in UIC0 */
+	ppc_cached_irq_mask[0] |= UIC0_UIC1NC;
+	mtdcr(DCRN_UIC_SR(UIC0), UIC0_UIC1NC);
+	mtdcr(DCRN_UIC_ER(UIC0), ppc_cached_irq_mask[0]);
+}
+
+#elif NR_UICS == 1
+#define ACK_UIC0_PARENT
+UIC_HANDLERS(0);
+
+static int ppc4xx_pic_get_irq(struct pt_regs *regs)
+{
+	u32 uic0 = mfdcr(DCRN_UIC_MSR(UIC0));
+	return uic0 ? 32 - ffs(uic0) : -1;
+}
+
+static inline void ppc4xx_pic_impl_init(void)
+{
+}
+#endif
+
+static struct ppc4xx_uic_impl {
+	struct hw_interrupt_type decl;
+	int base;			/* Base DCR number */
+} __uic[] = {
+	{ .decl = DECLARE_UIC(0), .base = UIC0 },
+#if NR_UICS > 1
+	{ .decl = DECLARE_UIC(1), .base = UIC1 },
+#if NR_UICS > 2
+	{ .decl = DECLARE_UIC(2), .base = UIC2 },
+#endif
+#endif
+};
+
+static inline int is_level_sensitive(int irq)
+{
+	u32 tr = mfdcr(DCRN_UIC_TR(__uic[irq >> 5].base));
+	return (tr & IRQ_MASK_UICx(irq)) == 0;
+}
+
+void __init ppc4xx_pic_init(void)
+{
+	int i;
+	unsigned char *eirqs = ppc4xx_uic_ext_irq_cfg;
+
+	for (i = 0; i < NR_UICS; ++i) {
+		int base = __uic[i].base;
+
+		/* Disable everything by default */
+		ppc_cached_irq_mask[i] = 0;
+		mtdcr(DCRN_UIC_ER(base), 0);
+
+		/* We don't use critical interrupts */
+		mtdcr(DCRN_UIC_CR(base), 0);
+
+		/* Configure polarity and triggering */
+		if (ppc4xx_core_uic_cfg) {
+			struct ppc4xx_uic_settings *p = ppc4xx_core_uic_cfg + i;
+			u32 mask = p->ext_irq_mask;
+			u32 pr = mfdcr(DCRN_UIC_PR(base)) & mask;
+			u32 tr = mfdcr(DCRN_UIC_TR(base)) & mask;
+
+			/* "Fixed" interrupts (on-chip devices) */
+			pr |= p->polarity & ~mask;
+			tr |= p->triggering & ~mask;
+
+			/* Merge external IRQs settings if board port
+			 * provided them
+			 */
+			if (eirqs && mask) {
+				pr &= ~mask;
+				tr &= ~mask;
+				while (mask) {
+					/* Extract current external IRQ mask */
+					u32 eirq_mask = 1 << __ilog2(mask);
+
+					if (!(*eirqs & IRQ_SENSE_LEVEL))
+						tr |= eirq_mask;
+
+					if (*eirqs & IRQ_POLARITY_POSITIVE)
+						pr |= eirq_mask;
+
+					mask &= ~eirq_mask;
+					++eirqs;
+				}
+			}
+			mtdcr(DCRN_UIC_PR(base), pr);
+			mtdcr(DCRN_UIC_TR(base), tr);
+		}
+
+		/* ACK any pending interrupts to prevent false
+		 * triggering after first enable
+		 */
+		mtdcr(DCRN_UIC_SR(base), 0xffffffff);
+	}
+
+	/* Perform optional implementation specific setup
+	 * (e.g. enable cascade interrupts for multi-UIC configurations)
+	 */
+	ppc4xx_pic_impl_init();
+
+	/* Attach low-level handlers */
+	for (i = 0; i < (NR_UICS << 5); ++i) {
+		irq_desc[i].handler = &__uic[i >> 5].decl;
+		if (is_level_sensitive(i))
+			irq_desc[i].status |= IRQ_LEVEL;
+	}
+
+	ppc_md.get_irq = ppc4xx_pic_get_irq;
+}
diff --git a/arch/ppc/syslib/ppc4xx_pm.c b/arch/ppc/syslib/ppc4xx_pm.c
new file mode 100644
index 000000000000..60a479204885
--- /dev/null
+++ b/arch/ppc/syslib/ppc4xx_pm.c
@@ -0,0 +1,47 @@
+/*
+ * Author: Armin Kuster <akuster@mvista.com>
+ *
+ * 2002 (c) MontaVista, Software, Inc.  This file is licensed under
+ * the terms of the GNU General Public License version 2.  This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ * This an attempt to get Power Management going for the IBM 4xx processor.
+ * This was derived from the ppc4xx._setup.c file
+ */
+
+#include <linux/config.h>
+#include <linux/init.h>
+
+#include <asm/ibm4xx.h>
+
+void __init
+ppc4xx_pm_init(void)
+{
+
+	unsigned int value = 0;
+
+	/* turn off unused hardware to save power */
+#ifdef CONFIG_405GP
+	value |= CPM_DCP;	/* CodePack */
+#endif
+
+#if !defined(CONFIG_IBM_OCP_GPIO)
+	value |= CPM_GPIO0;
+#endif
+
+#if !defined(CONFIG_PPC405_I2C_ADAP)
+	value |= CPM_IIC0;
+#ifdef CONFIG_STB03xxx
+	value |= CPM_IIC1;
+#endif
+#endif
+
+
+#if !defined(CONFIG_405_DMA)
+	value |= CPM_DMA;
+#endif
+
+	mtdcr(DCRN_CPMFR, value);
+
+}
diff --git a/arch/ppc/syslib/ppc4xx_setup.c b/arch/ppc/syslib/ppc4xx_setup.c
new file mode 100644
index 000000000000..e170aebeb69b
--- /dev/null
+++ b/arch/ppc/syslib/ppc4xx_setup.c
@@ -0,0 +1,321 @@
+/*
+ *
+ *    Copyright (c) 1999-2000 Grant Erickson <grant@lcse.umn.edu>
+ *
+ *    Copyright 2000-2001 MontaVista Software Inc.
+ *      Completed implementation.
+ *      Author: MontaVista Software, Inc.  <source@mvista.com>
+ *              Frank Rowand <frank_rowand@mvista.com>
+ *              Debbie Chu   <debbie_chu@mvista.com>
+ *	Further modifications by Armin Kuster
+ *
+ *    Module name: ppc4xx_setup.c
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/threads.h>
+#include <linux/spinlock.h>
+#include <linux/irq.h>
+#include <linux/reboot.h>
+#include <linux/param.h>
+#include <linux/string.h>
+#include <linux/initrd.h>
+#include <linux/pci.h>
+#include <linux/rtc.h>
+#include <linux/console.h>
+#include <linux/ide.h>
+#include <linux/serial_reg.h>
+#include <linux/seq_file.h>
+
+#include <asm/system.h>
+#include <asm/processor.h>
+#include <asm/machdep.h>
+#include <asm/page.h>
+#include <asm/kgdb.h>
+#include <asm/ibm4xx.h>
+#include <asm/time.h>
+#include <asm/todc.h>
+#include <asm/ppc4xx_pic.h>
+#include <asm/pci-bridge.h>
+#include <asm/bootinfo.h>
+
+#include <syslib/gen550.h>
+
+/* Function Prototypes */
+extern void abort(void);
+extern void ppc4xx_find_bridges(void);
+
+extern void ppc4xx_wdt_heartbeat(void);
+extern int wdt_enable;
+extern unsigned long wdt_period;
+
+/* Global Variables */
+bd_t __res;
+
+void __init
+ppc4xx_setup_arch(void)
+{
+#if !defined(CONFIG_BDI_SWITCH)
+	/*
+	 * The Abatron BDI JTAG debugger does not tolerate others
+	 * mucking with the debug registers.
+	 */
+        mtspr(SPRN_DBCR0, (DBCR0_IDM));
+	mtspr(SPRN_DBSR, 0xffffffff);
+#endif
+
+	/* Setup PCI host bridges */
+#ifdef CONFIG_PCI
+	ppc4xx_find_bridges();
+#endif
+}
+
+/*
+ *   This routine pretty-prints the platform's internal CPU clock
+ *   frequencies into the buffer for usage in /proc/cpuinfo.
+ */
+
+static int
+ppc4xx_show_percpuinfo(struct seq_file *m, int i)
+{
+	seq_printf(m, "clock\t\t: %ldMHz\n", (long)__res.bi_intfreq / 1000000);
+
+	return 0;
+}
+
+/*
+ *   This routine pretty-prints the platform's internal bus clock
+ *   frequencies into the buffer for usage in /proc/cpuinfo.
+ */
+static int
+ppc4xx_show_cpuinfo(struct seq_file *m)
+{
+	bd_t *bip = &__res;
+
+	seq_printf(m, "machine\t\t: %s\n", PPC4xx_MACHINE_NAME);
+	seq_printf(m, "plb bus clock\t: %ldMHz\n",
+		   (long) bip->bi_busfreq / 1000000);
+#ifdef CONFIG_PCI
+	seq_printf(m, "pci bus clock\t: %dMHz\n",
+		   bip->bi_pci_busfreq / 1000000);
+#endif
+
+	return 0;
+}
+
+/*
+ * Return the virtual address representing the top of physical RAM.
+ */
+static unsigned long __init
+ppc4xx_find_end_of_memory(void)
+{
+	return ((unsigned long) __res.bi_memsize);
+}
+
+void __init
+ppc4xx_map_io(void)
+{
+	io_block_mapping(PPC4xx_ONB_IO_VADDR,
+			 PPC4xx_ONB_IO_PADDR, PPC4xx_ONB_IO_SIZE, _PAGE_IO);
+#ifdef CONFIG_PCI
+	io_block_mapping(PPC4xx_PCI_IO_VADDR,
+			 PPC4xx_PCI_IO_PADDR, PPC4xx_PCI_IO_SIZE, _PAGE_IO);
+	io_block_mapping(PPC4xx_PCI_CFG_VADDR,
+			 PPC4xx_PCI_CFG_PADDR, PPC4xx_PCI_CFG_SIZE, _PAGE_IO);
+	io_block_mapping(PPC4xx_PCI_LCFG_VADDR,
+			 PPC4xx_PCI_LCFG_PADDR, PPC4xx_PCI_LCFG_SIZE, _PAGE_IO);
+#endif
+}
+
+void __init
+ppc4xx_init_IRQ(void)
+{
+	ppc4xx_pic_init();
+}
+
+static void
+ppc4xx_restart(char *cmd)
+{
+	printk("%s\n", cmd);
+	abort();
+}
+
+static void
+ppc4xx_power_off(void)
+{
+	printk("System Halted\n");
+	local_irq_disable();
+	while (1) ;
+}
+
+static void
+ppc4xx_halt(void)
+{
+	printk("System Halted\n");
+	local_irq_disable();
+	while (1) ;
+}
+
+/*
+ * This routine retrieves the internal processor frequency from the board
+ * information structure, sets up the kernel timer decrementer based on
+ * that value, enables the 4xx programmable interval timer (PIT) and sets
+ * it up for auto-reload.
+ */
+static void __init
+ppc4xx_calibrate_decr(void)
+{
+	unsigned int freq;
+	bd_t *bip = &__res;
+
+#if defined(CONFIG_WALNUT) || defined(CONFIG_ASH) || defined(CONFIG_SYCAMORE)
+	/* Walnut boot rom sets DCR CHCR1 (aka CPC0_CR1) bit CETE to 1 */
+	mtdcr(DCRN_CHCR1, mfdcr(DCRN_CHCR1) & ~CHR1_CETE);
+#endif
+	freq = bip->bi_tbfreq;
+	tb_ticks_per_jiffy = freq / HZ;
+	tb_to_us = mulhwu_scale_factor(freq, 1000000);
+
+	/* Set the time base to zero.
+	   ** At 200 Mhz, time base will rollover in ~2925 years.
+	 */
+
+	mtspr(SPRN_TBWL, 0);
+	mtspr(SPRN_TBWU, 0);
+
+	/* Clear any pending timer interrupts */
+
+	mtspr(SPRN_TSR, TSR_ENW | TSR_WIS | TSR_PIS | TSR_FIS);
+	mtspr(SPRN_TCR, TCR_PIE | TCR_ARE);
+
+	/* Set the PIT reload value and just let it run. */
+	mtspr(SPRN_PIT, tb_ticks_per_jiffy);
+}
+
+/*
+ * IDE stuff.
+ * should be generic for every IDE PCI chipset
+ */
+#if defined(CONFIG_PCI) && defined(CONFIG_IDE)
+static void
+ppc4xx_ide_init_hwif_ports(hw_regs_t * hw, unsigned long data_port,
+			   unsigned long ctrl_port, int *irq)
+{
+	int i;
+
+	for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; ++i)
+		hw->io_ports[i] = data_port + i - IDE_DATA_OFFSET;
+
+	hw->io_ports[IDE_CONTROL_OFFSET] = ctrl_port;
+}
+#endif /* defined(CONFIG_PCI) && defined(CONFIG_IDE) */
+
+TODC_ALLOC();
+
+/*
+ * Input(s):
+ *   r3 - Optional pointer to a board information structure.
+ *   r4 - Optional pointer to the physical starting address of the init RAM
+ *        disk.
+ *   r5 - Optional pointer to the physical ending address of the init RAM
+ *        disk.
+ *   r6 - Optional pointer to the physical starting address of any kernel
+ *        command-line parameters.
+ *   r7 - Optional pointer to the physical ending address of any kernel
+ *        command-line parameters.
+ */
+void __init
+ppc4xx_init(unsigned long r3, unsigned long r4, unsigned long r5,
+	    unsigned long r6, unsigned long r7)
+{
+	parse_bootinfo(find_bootinfo());
+
+	/*
+	 * If we were passed in a board information, copy it into the
+	 * residual data area.
+	 */
+	if (r3)
+		__res = *(bd_t *)(r3 + KERNELBASE);
+
+#if defined(CONFIG_BLK_DEV_INITRD)
+	/*
+	 * If the init RAM disk has been configured in, and there's a valid
+	 * starting address for it, set it up.
+	 */
+	if (r4) {
+		initrd_start = r4 + KERNELBASE;
+		initrd_end = r5 + KERNELBASE;
+	}
+#endif				/* CONFIG_BLK_DEV_INITRD */
+
+	/* Copy the kernel command line arguments to a safe place. */
+
+	if (r6) {
+		*(char *) (r7 + KERNELBASE) = 0;
+		strcpy(cmd_line, (char *) (r6 + KERNELBASE));
+	}
+#if defined(CONFIG_PPC405_WDT)
+/* Look for wdt= option on command line */
+	if (strstr(cmd_line, "wdt=")) {
+		int valid_wdt = 0;
+		char *p, *q;
+		for (q = cmd_line; (p = strstr(q, "wdt=")) != 0;) {
+			q = p + 4;
+			if (p > cmd_line && p[-1] != ' ')
+				continue;
+			wdt_period = simple_strtoul(q, &q, 0);
+			valid_wdt = 1;
+			++q;
+		}
+		wdt_enable = valid_wdt;
+	}
+#endif
+
+	/* Initialize machine-dependent vectors */
+
+	ppc_md.setup_arch = ppc4xx_setup_arch;
+	ppc_md.show_percpuinfo = ppc4xx_show_percpuinfo;
+	ppc_md.show_cpuinfo = ppc4xx_show_cpuinfo;
+	ppc_md.init_IRQ = ppc4xx_init_IRQ;
+
+	ppc_md.restart = ppc4xx_restart;
+	ppc_md.power_off = ppc4xx_power_off;
+	ppc_md.halt = ppc4xx_halt;
+
+	ppc_md.calibrate_decr = ppc4xx_calibrate_decr;
+
+#ifdef CONFIG_PPC405_WDT
+	ppc_md.heartbeat = ppc4xx_wdt_heartbeat;
+#endif
+	ppc_md.heartbeat_count = 0;
+
+	ppc_md.find_end_of_memory = ppc4xx_find_end_of_memory;
+	ppc_md.setup_io_mappings = ppc4xx_map_io;
+
+#ifdef CONFIG_SERIAL_TEXT_DEBUG
+	ppc_md.progress = gen550_progress;
+#endif
+
+#if defined(CONFIG_PCI) && defined(CONFIG_IDE)
+	ppc_ide_md.ide_init_hwif = ppc4xx_ide_init_hwif_ports;
+#endif /* defined(CONFIG_PCI) && defined(CONFIG_IDE) */
+}
+
+/* Called from MachineCheckException */
+void platform_machine_check(struct pt_regs *regs)
+{
+#if defined(DCRN_PLB0_BEAR)
+	printk("PLB0: BEAR= 0x%08x ACR=   0x%08x BESR=  0x%08x\n",
+	    mfdcr(DCRN_PLB0_BEAR), mfdcr(DCRN_PLB0_ACR),
+	    mfdcr(DCRN_PLB0_BESR));
+#endif
+#if defined(DCRN_POB0_BEAR)
+	printk("PLB0 to OPB: BEAR= 0x%08x BESR0= 0x%08x BESR1= 0x%08x\n",
+	    mfdcr(DCRN_POB0_BEAR), mfdcr(DCRN_POB0_BESR0),
+	    mfdcr(DCRN_POB0_BESR1));
+#endif
+
+}
diff --git a/arch/ppc/syslib/ppc4xx_sgdma.c b/arch/ppc/syslib/ppc4xx_sgdma.c
new file mode 100644
index 000000000000..9f76e8ee39ed
--- /dev/null
+++ b/arch/ppc/syslib/ppc4xx_sgdma.c
@@ -0,0 +1,467 @@
+/*
+ * arch/ppc/kernel/ppc4xx_sgdma.c
+ *
+ * IBM PPC4xx DMA engine scatter/gather library
+ *
+ * Copyright 2002-2003 MontaVista Software Inc.
+ *
+ * Cleaned up and converted to new DCR access
+ * Matt Porter <mporter@kernel.crashing.org>
+ *
+ * Original code by Armin Kuster <akuster@mvista.com>
+ * and Pete Popov <ppopov@mvista.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ * You should have received a copy of the  GNU General Public License along
+ * with this program; if not, write  to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/ppc4xx_dma.h>
+
+void
+ppc4xx_set_sg_addr(int dmanr, phys_addr_t sg_addr)
+{
+	if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
+		printk("ppc4xx_set_sg_addr: bad channel: %d\n", dmanr);
+		return;
+	}
+
+#ifdef PPC4xx_DMA_64BIT
+	mtdcr(DCRN_ASGH0 + (dmanr * 0x8), (u32)(sg_addr >> 32));
+#endif
+	mtdcr(DCRN_ASG0 + (dmanr * 0x8), (u32)sg_addr);
+}
+
+/*
+ *   Add a new sgl descriptor to the end of a scatter/gather list
+ *   which was created by alloc_dma_handle().
+ *
+ *   For a memory to memory transfer, both dma addresses must be
+ *   valid. For a peripheral to memory transfer, one of the addresses
+ *   must be set to NULL, depending on the direction of the transfer:
+ *   memory to peripheral: set dst_addr to NULL,
+ *   peripheral to memory: set src_addr to NULL.
+ */
+int
+ppc4xx_add_dma_sgl(sgl_handle_t handle, phys_addr_t src_addr, phys_addr_t dst_addr,
+		   unsigned int count)
+{
+	sgl_list_info_t *psgl = (sgl_list_info_t *) handle;
+	ppc_dma_ch_t *p_dma_ch;
+
+	if (!handle) {
+		printk("ppc4xx_add_dma_sgl: null handle\n");
+		return DMA_STATUS_BAD_HANDLE;
+	}
+
+	if (psgl->dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
+		printk("ppc4xx_add_dma_sgl: bad channel: %d\n", psgl->dmanr);
+		return DMA_STATUS_BAD_CHANNEL;
+	}
+
+	p_dma_ch = &dma_channels[psgl->dmanr];
+
+#ifdef DEBUG_4xxDMA
+	{
+		int error = 0;
+		unsigned int aligned =
+		    (unsigned) src_addr | (unsigned) dst_addr | count;
+		switch (p_dma_ch->pwidth) {
+		case PW_8:
+			break;
+		case PW_16:
+			if (aligned & 0x1)
+				error = 1;
+			break;
+		case PW_32:
+			if (aligned & 0x3)
+				error = 1;
+			break;
+		case PW_64:
+			if (aligned & 0x7)
+				error = 1;
+			break;
+		default:
+			printk("ppc4xx_add_dma_sgl: invalid bus width: 0x%x\n",
+			       p_dma_ch->pwidth);
+			return DMA_STATUS_GENERAL_ERROR;
+		}
+		if (error)
+			printk
+			    ("Alignment warning: ppc4xx_add_dma_sgl src 0x%x dst 0x%x count 0x%x bus width var %d\n",
+			     src_addr, dst_addr, count, p_dma_ch->pwidth);
+
+	}
+#endif
+
+	if ((unsigned) (psgl->ptail + 1) >= ((unsigned) psgl + SGL_LIST_SIZE)) {
+		printk("sgl handle out of memory \n");
+		return DMA_STATUS_OUT_OF_MEMORY;
+	}
+
+	if (!psgl->ptail) {
+		psgl->phead = (ppc_sgl_t *)
+		    ((unsigned) psgl + sizeof (sgl_list_info_t));
+		psgl->phead_dma = psgl->dma_addr + sizeof(sgl_list_info_t);
+		psgl->ptail = psgl->phead;
+		psgl->ptail_dma = psgl->phead_dma;
+	} else {
+		if(p_dma_ch->int_on_final_sg) {
+			/* mask out all dma interrupts, except error, on tail
+			before adding new tail. */
+			psgl->ptail->control_count &=
+				~(SG_TCI_ENABLE | SG_ETI_ENABLE);
+		}
+		psgl->ptail->next = psgl->ptail_dma + sizeof(ppc_sgl_t);
+		psgl->ptail++;
+		psgl->ptail_dma += sizeof(ppc_sgl_t);
+	}
+
+	psgl->ptail->control = psgl->control;
+	psgl->ptail->src_addr = src_addr;
+	psgl->ptail->dst_addr = dst_addr;
+	psgl->ptail->control_count = (count >> p_dma_ch->shift) |
+	    psgl->sgl_control;
+	psgl->ptail->next = (uint32_t) NULL;
+
+	return DMA_STATUS_GOOD;
+}
+
+/*
+ * Enable (start) the DMA described by the sgl handle.
+ */
+void
+ppc4xx_enable_dma_sgl(sgl_handle_t handle)
+{
+	sgl_list_info_t *psgl = (sgl_list_info_t *) handle;
+	ppc_dma_ch_t *p_dma_ch;
+	uint32_t sg_command;
+
+	if (!handle) {
+		printk("ppc4xx_enable_dma_sgl: null handle\n");
+		return;
+	} else if (psgl->dmanr > (MAX_PPC4xx_DMA_CHANNELS - 1)) {
+		printk("ppc4xx_enable_dma_sgl: bad channel in handle %d\n",
+		       psgl->dmanr);
+		return;
+	} else if (!psgl->phead) {
+		printk("ppc4xx_enable_dma_sgl: sg list empty\n");
+		return;
+	}
+
+	p_dma_ch = &dma_channels[psgl->dmanr];
+	psgl->ptail->control_count &= ~SG_LINK;	/* make this the last dscrptr */
+	sg_command = mfdcr(DCRN_ASGC);
+
+	ppc4xx_set_sg_addr(psgl->dmanr, psgl->phead_dma);
+
+	sg_command |= SSG_ENABLE(psgl->dmanr);
+
+	mtdcr(DCRN_ASGC, sg_command);	/* start transfer */
+}
+
+/*
+ * Halt an active scatter/gather DMA operation.
+ */
+void
+ppc4xx_disable_dma_sgl(sgl_handle_t handle)
+{
+	sgl_list_info_t *psgl = (sgl_list_info_t *) handle;
+	uint32_t sg_command;
+
+	if (!handle) {
+		printk("ppc4xx_enable_dma_sgl: null handle\n");
+		return;
+	} else if (psgl->dmanr > (MAX_PPC4xx_DMA_CHANNELS - 1)) {
+		printk("ppc4xx_enable_dma_sgl: bad channel in handle %d\n",
+		       psgl->dmanr);
+		return;
+	}
+
+	sg_command = mfdcr(DCRN_ASGC);
+	sg_command &= ~SSG_ENABLE(psgl->dmanr);
+	mtdcr(DCRN_ASGC, sg_command);	/* stop transfer */
+}
+
+/*
+ *  Returns number of bytes left to be transferred from the entire sgl list.
+ *  *src_addr and *dst_addr get set to the source/destination address of
+ *  the sgl descriptor where the DMA stopped.
+ *
+ *  An sgl transfer must NOT be active when this function is called.
+ */
+int
+ppc4xx_get_dma_sgl_residue(sgl_handle_t handle, phys_addr_t * src_addr,
+			   phys_addr_t * dst_addr)
+{
+	sgl_list_info_t *psgl = (sgl_list_info_t *) handle;
+	ppc_dma_ch_t *p_dma_ch;
+	ppc_sgl_t *pnext, *sgl_addr;
+	uint32_t count_left;
+
+	if (!handle) {
+		printk("ppc4xx_get_dma_sgl_residue: null handle\n");
+		return DMA_STATUS_BAD_HANDLE;
+	} else if (psgl->dmanr > (MAX_PPC4xx_DMA_CHANNELS - 1)) {
+		printk("ppc4xx_get_dma_sgl_residue: bad channel in handle %d\n",
+		       psgl->dmanr);
+		return DMA_STATUS_BAD_CHANNEL;
+	}
+
+	sgl_addr = (ppc_sgl_t *) __va(mfdcr(DCRN_ASG0 + (psgl->dmanr * 0x8)));
+	count_left = mfdcr(DCRN_DMACT0 + (psgl->dmanr * 0x8)) & SG_COUNT_MASK;
+
+	if (!sgl_addr) {
+		printk("ppc4xx_get_dma_sgl_residue: sgl addr register is null\n");
+		goto error;
+	}
+
+	pnext = psgl->phead;
+	while (pnext &&
+	       ((unsigned) pnext < ((unsigned) psgl + SGL_LIST_SIZE) &&
+		(pnext != sgl_addr))
+	    ) {
+		pnext++;
+	}
+
+	if (pnext == sgl_addr) {	/* found the sgl descriptor */
+
+		*src_addr = pnext->src_addr;
+		*dst_addr = pnext->dst_addr;
+
+		/*
+		 * Now search the remaining descriptors and add their count.
+		 * We already have the remaining count from this descriptor in
+		 * count_left.
+		 */
+		pnext++;
+
+		while ((pnext != psgl->ptail) &&
+		       ((unsigned) pnext < ((unsigned) psgl + SGL_LIST_SIZE))
+		    ) {
+			count_left += pnext->control_count & SG_COUNT_MASK;
+		}
+
+		if (pnext != psgl->ptail) {	/* should never happen */
+			printk
+			    ("ppc4xx_get_dma_sgl_residue error (1) psgl->ptail 0x%x handle 0x%x\n",
+			     (unsigned int) psgl->ptail, (unsigned int) handle);
+			goto error;
+		}
+
+		/* success */
+		p_dma_ch = &dma_channels[psgl->dmanr];
+		return (count_left << p_dma_ch->shift);	/* count in bytes */
+
+	} else {
+		/* this shouldn't happen */
+		printk
+		    ("get_dma_sgl_residue, unable to match current address 0x%x, handle 0x%x\n",
+		     (unsigned int) sgl_addr, (unsigned int) handle);
+
+	}
+
+      error:
+	*src_addr = (phys_addr_t) NULL;
+	*dst_addr = (phys_addr_t) NULL;
+	return 0;
+}
+
+/*
+ * Returns the address(es) of the buffer(s) contained in the head element of
+ * the scatter/gather list.  The element is removed from the scatter/gather
+ * list and the next element becomes the head.
+ *
+ * This function should only be called when the DMA is not active.
+ */
+int
+ppc4xx_delete_dma_sgl_element(sgl_handle_t handle, phys_addr_t * src_dma_addr,
+			      phys_addr_t * dst_dma_addr)
+{
+	sgl_list_info_t *psgl = (sgl_list_info_t *) handle;
+
+	if (!handle) {
+		printk("ppc4xx_delete_sgl_element: null handle\n");
+		return DMA_STATUS_BAD_HANDLE;
+	} else if (psgl->dmanr > (MAX_PPC4xx_DMA_CHANNELS - 1)) {
+		printk("ppc4xx_delete_sgl_element: bad channel in handle %d\n",
+		       psgl->dmanr);
+		return DMA_STATUS_BAD_CHANNEL;
+	}
+
+	if (!psgl->phead) {
+		printk("ppc4xx_delete_sgl_element: sgl list empty\n");
+		*src_dma_addr = (phys_addr_t) NULL;
+		*dst_dma_addr = (phys_addr_t) NULL;
+		return DMA_STATUS_SGL_LIST_EMPTY;
+	}
+
+	*src_dma_addr = (phys_addr_t) psgl->phead->src_addr;
+	*dst_dma_addr = (phys_addr_t) psgl->phead->dst_addr;
+
+	if (psgl->phead == psgl->ptail) {
+		/* last descriptor on the list */
+		psgl->phead = NULL;
+		psgl->ptail = NULL;
+	} else {
+		psgl->phead++;
+		psgl->phead_dma += sizeof(ppc_sgl_t);
+	}
+
+	return DMA_STATUS_GOOD;
+}
+
+
+/*
+ *   Create a scatter/gather list handle.  This is simply a structure which
+ *   describes a scatter/gather list.
+ *
+ *   A handle is returned in "handle" which the driver should save in order to
+ *   be able to access this list later.  A chunk of memory will be allocated
+ *   to be used by the API for internal management purposes, including managing
+ *   the sg list and allocating memory for the sgl descriptors.  One page should
+ *   be more than enough for that purpose.  Perhaps it's a bit wasteful to use
+ *   a whole page for a single sg list, but most likely there will be only one
+ *   sg list per channel.
+ *
+ *   Interrupt notes:
+ *   Each sgl descriptor has a copy of the DMA control word which the DMA engine
+ *   loads in the control register.  The control word has a "global" interrupt
+ *   enable bit for that channel. Interrupts are further qualified by a few bits
+ *   in the sgl descriptor count register.  In order to setup an sgl, we have to
+ *   know ahead of time whether or not interrupts will be enabled at the completion
+ *   of the transfers.  Thus, enable_dma_interrupt()/disable_dma_interrupt() MUST
+ *   be called before calling alloc_dma_handle().  If the interrupt mode will never
+ *   change after powerup, then enable_dma_interrupt()/disable_dma_interrupt()
+ *   do not have to be called -- interrupts will be enabled or disabled based
+ *   on how the channel was configured after powerup by the hw_init_dma_channel()
+ *   function.  Each sgl descriptor will be setup to interrupt if an error occurs;
+ *   however, only the last descriptor will be setup to interrupt. Thus, an
+ *   interrupt will occur (if interrupts are enabled) only after the complete
+ *   sgl transfer is done.
+ */
+int
+ppc4xx_alloc_dma_handle(sgl_handle_t * phandle, unsigned int mode, unsigned int dmanr)
+{
+	sgl_list_info_t *psgl=NULL;
+	dma_addr_t dma_addr;
+	ppc_dma_ch_t *p_dma_ch = &dma_channels[dmanr];
+	uint32_t sg_command;
+	uint32_t ctc_settings;
+	void *ret;
+
+	if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
+		printk("ppc4xx_alloc_dma_handle: invalid channel 0x%x\n", dmanr);
+		return DMA_STATUS_BAD_CHANNEL;
+	}
+
+	if (!phandle) {
+		printk("ppc4xx_alloc_dma_handle: null handle pointer\n");
+		return DMA_STATUS_NULL_POINTER;
+	}
+
+	/* Get a page of memory, which is zeroed out by consistent_alloc() */
+	ret = dma_alloc_coherent(NULL, DMA_PPC4xx_SIZE, &dma_addr, GFP_KERNEL);
+	if (ret != NULL) {
+		memset(ret, 0, DMA_PPC4xx_SIZE);
+		psgl = (sgl_list_info_t *) ret;
+	}
+
+	if (psgl == NULL) {
+		*phandle = (sgl_handle_t) NULL;
+		return DMA_STATUS_OUT_OF_MEMORY;
+	}
+
+	psgl->dma_addr = dma_addr;
+	psgl->dmanr = dmanr;
+
+	/*
+	 * Modify and save the control word. These words will be
+	 * written to each sgl descriptor.  The DMA engine then
+	 * loads this control word into the control register
+	 * every time it reads a new descriptor.
+	 */
+	psgl->control = p_dma_ch->control;
+	/* Clear all mode bits */
+	psgl->control &= ~(DMA_TM_MASK | DMA_TD);
+	/* Save control word and mode */
+	psgl->control |= (mode | DMA_CE_ENABLE);
+
+	/* In MM mode, we must set ETD/TCE */
+	if (mode == DMA_MODE_MM)
+		psgl->control |= DMA_ETD_OUTPUT | DMA_TCE_ENABLE;
+
+	if (p_dma_ch->int_enable) {
+		/* Enable channel interrupt */
+		psgl->control |= DMA_CIE_ENABLE;
+	} else {
+		psgl->control &= ~DMA_CIE_ENABLE;
+	}
+
+	sg_command = mfdcr(DCRN_ASGC);
+	sg_command |= SSG_MASK_ENABLE(dmanr);
+
+	/* Enable SGL control access */
+	mtdcr(DCRN_ASGC, sg_command);
+	psgl->sgl_control = SG_ERI_ENABLE | SG_LINK;
+
+	/* keep control count register settings */
+	ctc_settings = mfdcr(DCRN_DMACT0 + (dmanr * 0x8))
+		& (DMA_CTC_BSIZ_MSK | DMA_CTC_BTEN); /*burst mode settings*/
+	psgl->sgl_control |= ctc_settings;
+
+	if (p_dma_ch->int_enable) {
+		if (p_dma_ch->tce_enable)
+			psgl->sgl_control |= SG_TCI_ENABLE;
+		else
+			psgl->sgl_control |= SG_ETI_ENABLE;
+	}
+
+	*phandle = (sgl_handle_t) psgl;
+	return DMA_STATUS_GOOD;
+}
+
+/*
+ * Destroy a scatter/gather list handle that was created by alloc_dma_handle().
+ * The list must be empty (contain no elements).
+ */
+void
+ppc4xx_free_dma_handle(sgl_handle_t handle)
+{
+	sgl_list_info_t *psgl = (sgl_list_info_t *) handle;
+
+	if (!handle) {
+		printk("ppc4xx_free_dma_handle: got NULL\n");
+		return;
+	} else if (psgl->phead) {
+		printk("ppc4xx_free_dma_handle: list not empty\n");
+		return;
+	} else if (!psgl->dma_addr) {	/* should never happen */
+		printk("ppc4xx_free_dma_handle: no dma address\n");
+		return;
+	}
+
+	dma_free_coherent(NULL, DMA_PPC4xx_SIZE, (void *) psgl, 0);
+}
+
+EXPORT_SYMBOL(ppc4xx_alloc_dma_handle);
+EXPORT_SYMBOL(ppc4xx_free_dma_handle);
+EXPORT_SYMBOL(ppc4xx_add_dma_sgl);
+EXPORT_SYMBOL(ppc4xx_delete_dma_sgl_element);
+EXPORT_SYMBOL(ppc4xx_enable_dma_sgl);
+EXPORT_SYMBOL(ppc4xx_disable_dma_sgl);
+EXPORT_SYMBOL(ppc4xx_get_dma_sgl_residue);
diff --git a/arch/ppc/syslib/ppc83xx_setup.c b/arch/ppc/syslib/ppc83xx_setup.c
new file mode 100644
index 000000000000..c28f9d679484
--- /dev/null
+++ b/arch/ppc/syslib/ppc83xx_setup.c
@@ -0,0 +1,138 @@
+/*
+ * arch/ppc/syslib/ppc83xx_setup.c
+ *
+ * MPC83XX common board code
+ *
+ * Maintainer: Kumar Gala <kumar.gala@freescale.com>
+ *
+ * Copyright 2005 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/serial.h>
+#include <linux/tty.h>	/* for linux/serial_core.h */
+#include <linux/serial_core.h>
+#include <linux/serial_8250.h>
+
+#include <asm/prom.h>
+#include <asm/time.h>
+#include <asm/mpc83xx.h>
+#include <asm/mmu.h>
+#include <asm/ppc_sys.h>
+#include <asm/kgdb.h>
+
+#include <syslib/ppc83xx_setup.h>
+
+phys_addr_t immrbar;
+
+/* Return the amount of memory */
+unsigned long __init
+mpc83xx_find_end_of_memory(void)
+{
+        bd_t *binfo;
+
+        binfo = (bd_t *) __res;
+
+        return binfo->bi_memsize;
+}
+
+long __init
+mpc83xx_time_init(void)
+{
+#define SPCR_OFFS   0x00000110
+#define SPCR_TBEN   0x00400000
+
+	bd_t *binfo = (bd_t *)__res;
+	u32 *spcr = ioremap(binfo->bi_immr_base + SPCR_OFFS, 4);
+
+	*spcr |= SPCR_TBEN;
+
+	iounmap(spcr);
+
+	return 0;
+}
+
+/* The decrementer counts at the system (internal) clock freq divided by 4 */
+void __init
+mpc83xx_calibrate_decr(void)
+{
+        bd_t *binfo = (bd_t *) __res;
+        unsigned int freq, divisor;
+
+	freq = binfo->bi_busfreq;
+	divisor = 4;
+	tb_ticks_per_jiffy = freq / HZ / divisor;
+	tb_to_us = mulhwu_scale_factor(freq / divisor, 1000000);
+}
+
+#ifdef CONFIG_SERIAL_8250
+void __init
+mpc83xx_early_serial_map(void)
+{
+#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
+	struct uart_port serial_req;
+#endif
+	struct plat_serial8250_port *pdata;
+	bd_t *binfo = (bd_t *) __res;
+	pdata = (struct plat_serial8250_port *) ppc_sys_get_pdata(MPC83xx_DUART);
+
+	/* Setup serial port access */
+	pdata[0].uartclk = binfo->bi_busfreq;
+	pdata[0].mapbase += binfo->bi_immr_base;
+	pdata[0].membase = ioremap(pdata[0].mapbase, 0x100);
+
+#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
+	memset(&serial_req, 0, sizeof (serial_req));
+	serial_req.iotype = SERIAL_IO_MEM;
+	serial_req.mapbase = pdata[0].mapbase;
+	serial_req.membase = pdata[0].membase;
+	serial_req.regshift = 0;
+
+	gen550_init(0, &serial_req);
+#endif
+
+	pdata[1].uartclk = binfo->bi_busfreq;
+	pdata[1].mapbase += binfo->bi_immr_base;
+	pdata[1].membase = ioremap(pdata[1].mapbase, 0x100);
+
+#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
+	/* Assume gen550_init() doesn't modify serial_req */
+	serial_req.mapbase = pdata[1].mapbase;
+	serial_req.membase = pdata[1].membase;
+
+	gen550_init(1, &serial_req);
+#endif
+}
+#endif
+
+void
+mpc83xx_restart(char *cmd)
+{
+	local_irq_disable();
+	for(;;);
+}
+
+void
+mpc83xx_power_off(void)
+{
+	local_irq_disable();
+	for(;;);
+}
+
+void
+mpc83xx_halt(void)
+{
+	local_irq_disable();
+	for(;;);
+}
+
+/* PCI SUPPORT DOES NOT EXIT, MODEL after ppc85xx_setup.c */
diff --git a/arch/ppc/syslib/ppc83xx_setup.h b/arch/ppc/syslib/ppc83xx_setup.h
new file mode 100644
index 000000000000..683f179b746c
--- /dev/null
+++ b/arch/ppc/syslib/ppc83xx_setup.h
@@ -0,0 +1,53 @@
+/*
+ * arch/ppc/syslib/ppc83xx_setup.h
+ *
+ * MPC83XX common board definitions
+ *
+ * Maintainer: Kumar Gala <kumar.gala@freescale.com>
+ *
+ * Copyright 2005 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+
+#ifndef __PPC_SYSLIB_PPC83XX_SETUP_H
+#define __PPC_SYSLIB_PPC83XX_SETUP_H
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <asm/ppcboot.h>
+
+extern unsigned long mpc83xx_find_end_of_memory(void) __init;
+extern long mpc83xx_time_init(void) __init;
+extern void mpc83xx_calibrate_decr(void) __init;
+extern void mpc83xx_early_serial_map(void) __init;
+extern void mpc83xx_restart(char *cmd);
+extern void mpc83xx_power_off(void);
+extern void mpc83xx_halt(void);
+extern void mpc83xx_setup_hose(void) __init;
+
+/* PCI config */
+#if 0
+#define PCI1_CFG_ADDR_OFFSET	(FIXME)
+#define PCI1_CFG_DATA_OFFSET	(FIXME)
+
+#define PCI2_CFG_ADDR_OFFSET	(FIXME)
+#define PCI2_CFG_DATA_OFFSET	(FIXME)
+#endif
+
+/* Serial Config */
+#ifdef CONFIG_SERIAL_MANY_PORTS
+#define RS_TABLE_SIZE  64
+#else
+#define RS_TABLE_SIZE  2
+#endif
+
+#ifndef BASE_BAUD
+#define BASE_BAUD 115200
+#endif
+
+#endif /* __PPC_SYSLIB_PPC83XX_SETUP_H */
diff --git a/arch/ppc/syslib/ppc85xx_common.c b/arch/ppc/syslib/ppc85xx_common.c
new file mode 100644
index 000000000000..e83f2f8686d3
--- /dev/null
+++ b/arch/ppc/syslib/ppc85xx_common.c
@@ -0,0 +1,33 @@
+/*
+ * arch/ppc/syslib/ppc85xx_common.c
+ *
+ * MPC85xx support routines
+ *
+ * Maintainer: Kumar Gala <kumar.gala@freescale.com>
+ *
+ * Copyright 2004 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/init.h>
+
+#include <asm/mpc85xx.h>
+#include <asm/mmu.h>
+
+/* ************************************************************************ */
+/* Return the value of CCSRBAR for the current board */
+
+phys_addr_t
+get_ccsrbar(void)
+{
+        return BOARD_CCSRBAR;
+}
+
+EXPORT_SYMBOL(get_ccsrbar);
diff --git a/arch/ppc/syslib/ppc85xx_common.h b/arch/ppc/syslib/ppc85xx_common.h
new file mode 100644
index 000000000000..2c8f304441bf
--- /dev/null
+++ b/arch/ppc/syslib/ppc85xx_common.h
@@ -0,0 +1,25 @@
+/*
+ * arch/ppc/syslib/ppc85xx_common.h
+ *
+ * MPC85xx support routines
+ *
+ * Maintainer: Kumar Gala <kumar.gala@freescale.com>
+ *
+ * Copyright 2004 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __PPC_SYSLIB_PPC85XX_COMMON_H
+#define __PPC_SYSLIB_PPC85XX_COMMON_H
+
+#include <linux/config.h>
+#include <linux/init.h>
+
+/* Provide access to ccsrbar for any modules, etc */
+phys_addr_t get_ccsrbar(void);
+
+#endif /* __PPC_SYSLIB_PPC85XX_COMMON_H */
diff --git a/arch/ppc/syslib/ppc85xx_setup.c b/arch/ppc/syslib/ppc85xx_setup.c
new file mode 100644
index 000000000000..81f1968c3269
--- /dev/null
+++ b/arch/ppc/syslib/ppc85xx_setup.c
@@ -0,0 +1,354 @@
+/*
+ * arch/ppc/syslib/ppc85xx_setup.c
+ *
+ * MPC85XX common board code
+ *
+ * Maintainer: Kumar Gala <kumar.gala@freescale.com>
+ *
+ * Copyright 2004 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/serial.h>
+#include <linux/tty.h>	/* for linux/serial_core.h */
+#include <linux/serial_core.h>
+#include <linux/serial_8250.h>
+
+#include <asm/prom.h>
+#include <asm/time.h>
+#include <asm/mpc85xx.h>
+#include <asm/immap_85xx.h>
+#include <asm/mmu.h>
+#include <asm/ppc_sys.h>
+#include <asm/kgdb.h>
+
+#include <syslib/ppc85xx_setup.h>
+
+/* Return the amount of memory */
+unsigned long __init
+mpc85xx_find_end_of_memory(void)
+{
+        bd_t *binfo;
+
+        binfo = (bd_t *) __res;
+
+        return binfo->bi_memsize;
+}
+
+/* The decrementer counts at the system (internal) clock freq divided by 8 */
+void __init
+mpc85xx_calibrate_decr(void)
+{
+        bd_t *binfo = (bd_t *) __res;
+        unsigned int freq, divisor;
+
+        /* get the core frequency */
+        freq = binfo->bi_busfreq;
+
+        /* The timebase is updated every 8 bus clocks, HID0[SEL_TBCLK] = 0 */
+        divisor = 8;
+        tb_ticks_per_jiffy = freq / divisor / HZ;
+        tb_to_us = mulhwu_scale_factor(freq / divisor, 1000000);
+
+	/* Set the time base to zero */
+	mtspr(SPRN_TBWL, 0);
+	mtspr(SPRN_TBWU, 0);
+
+	/* Clear any pending timer interrupts */
+	mtspr(SPRN_TSR, TSR_ENW | TSR_WIS | TSR_DIS | TSR_FIS);
+
+	/* Enable decrementer interrupt */
+	mtspr(SPRN_TCR, TCR_DIE);
+}
+
+#ifdef CONFIG_SERIAL_8250
+void __init
+mpc85xx_early_serial_map(void)
+{
+#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
+	struct uart_port serial_req;
+#endif
+	struct plat_serial8250_port *pdata;
+	bd_t *binfo = (bd_t *) __res;
+	pdata = (struct plat_serial8250_port *) ppc_sys_get_pdata(MPC85xx_DUART);
+
+	/* Setup serial port access */
+	pdata[0].uartclk = binfo->bi_busfreq;
+	pdata[0].mapbase += binfo->bi_immr_base;
+	pdata[0].membase = ioremap(pdata[0].mapbase, MPC85xx_UART0_SIZE);
+
+#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
+	memset(&serial_req, 0, sizeof (serial_req));
+	serial_req.iotype = SERIAL_IO_MEM;
+	serial_req.mapbase = pdata[0].mapbase;
+	serial_req.membase = pdata[0].membase;
+	serial_req.regshift = 0;
+
+	gen550_init(0, &serial_req);
+#endif
+
+	pdata[1].uartclk = binfo->bi_busfreq;
+	pdata[1].mapbase += binfo->bi_immr_base;
+	pdata[1].membase = ioremap(pdata[1].mapbase, MPC85xx_UART0_SIZE);
+
+#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
+	/* Assume gen550_init() doesn't modify serial_req */
+	serial_req.mapbase = pdata[1].mapbase;
+	serial_req.membase = pdata[1].membase;
+
+	gen550_init(1, &serial_req);
+#endif
+}
+#endif
+
+void
+mpc85xx_restart(char *cmd)
+{
+	local_irq_disable();
+	abort();
+}
+
+void
+mpc85xx_power_off(void)
+{
+	local_irq_disable();
+	for(;;);
+}
+
+void
+mpc85xx_halt(void)
+{
+	local_irq_disable();
+	for(;;);
+}
+
+#ifdef CONFIG_PCI
+static void __init
+mpc85xx_setup_pci1(struct pci_controller *hose)
+{
+	volatile struct ccsr_pci *pci;
+	volatile struct ccsr_guts *guts;
+	unsigned short temps;
+	bd_t *binfo = (bd_t *) __res;
+
+	pci = ioremap(binfo->bi_immr_base + MPC85xx_PCI1_OFFSET,
+		    MPC85xx_PCI1_SIZE);
+
+	guts = ioremap(binfo->bi_immr_base + MPC85xx_GUTS_OFFSET,
+		    MPC85xx_GUTS_SIZE);
+
+	early_read_config_word(hose, 0, 0, PCI_COMMAND, &temps);
+	temps |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
+	early_write_config_word(hose, 0, 0, PCI_COMMAND, temps);
+
+#define PORDEVSR_PCI	(0x00800000)	/* PCI Mode */
+	if (guts->pordevsr & PORDEVSR_PCI) {
+ 		early_write_config_byte(hose, 0, 0, PCI_LATENCY_TIMER, 0x80);
+ 	} else {
+		/* PCI-X init */
+		temps = PCI_X_CMD_MAX_SPLIT | PCI_X_CMD_MAX_READ
+			| PCI_X_CMD_ERO | PCI_X_CMD_DPERR_E;
+		early_write_config_word(hose, 0, 0, PCIX_COMMAND, temps);
+	}
+
+	/* Disable all windows (except powar0 since its ignored) */
+	pci->powar1 = 0;
+	pci->powar2 = 0;
+	pci->powar3 = 0;
+	pci->powar4 = 0;
+	pci->piwar1 = 0;
+	pci->piwar2 = 0;
+	pci->piwar3 = 0;
+
+	/* Setup Phys:PCI 1:1 outbound mem window @ MPC85XX_PCI1_LOWER_MEM */
+	pci->potar1 = (MPC85XX_PCI1_LOWER_MEM >> 12) & 0x000fffff;
+	pci->potear1 = 0x00000000;
+	pci->powbar1 = (MPC85XX_PCI1_LOWER_MEM >> 12) & 0x000fffff;
+	/* Enable, Mem R/W */
+	pci->powar1 = 0x80044000 |
+	   (__ilog2(MPC85XX_PCI1_UPPER_MEM - MPC85XX_PCI1_LOWER_MEM + 1) - 1);
+
+	/* Setup outboud IO windows @ MPC85XX_PCI1_IO_BASE */
+	pci->potar2 = 0x00000000;
+	pci->potear2 = 0x00000000;
+	pci->powbar2 = (MPC85XX_PCI1_IO_BASE >> 12) & 0x000fffff;
+	/* Enable, IO R/W */
+	pci->powar2 = 0x80088000 | (__ilog2(MPC85XX_PCI1_IO_SIZE) - 1);
+
+	/* Setup 2G inbound Memory Window @ 0 */
+	pci->pitar1 = 0x00000000;
+	pci->piwbar1 = 0x00000000;
+	pci->piwar1 = 0xa0f5501e;	/* Enable, Prefetch, Local
+					   Mem, Snoop R/W, 2G */
+}
+
+
+extern int mpc85xx_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin);
+extern int mpc85xx_exclude_device(u_char bus, u_char devfn);
+
+#ifdef CONFIG_85xx_PCI2
+static void __init
+mpc85xx_setup_pci2(struct pci_controller *hose)
+{
+	volatile struct ccsr_pci *pci;
+	unsigned short temps;
+	bd_t *binfo = (bd_t *) __res;
+
+	pci = ioremap(binfo->bi_immr_base + MPC85xx_PCI2_OFFSET,
+		    MPC85xx_PCI2_SIZE);
+
+	early_read_config_word(hose, hose->bus_offset, 0, PCI_COMMAND, &temps);
+	temps |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
+	early_write_config_word(hose, hose->bus_offset, 0, PCI_COMMAND, temps);
+	early_write_config_byte(hose, hose->bus_offset, 0, PCI_LATENCY_TIMER, 0x80);
+
+	/* Disable all windows (except powar0 since its ignored) */
+	pci->powar1 = 0;
+	pci->powar2 = 0;
+	pci->powar3 = 0;
+	pci->powar4 = 0;
+	pci->piwar1 = 0;
+	pci->piwar2 = 0;
+	pci->piwar3 = 0;
+
+	/* Setup Phys:PCI 1:1 outbound mem window @ MPC85XX_PCI2_LOWER_MEM */
+	pci->potar1 = (MPC85XX_PCI2_LOWER_MEM >> 12) & 0x000fffff;
+	pci->potear1 = 0x00000000;
+	pci->powbar1 = (MPC85XX_PCI2_LOWER_MEM >> 12) & 0x000fffff;
+	/* Enable, Mem R/W */
+	pci->powar1 = 0x80044000 |
+	   (__ilog2(MPC85XX_PCI1_UPPER_MEM - MPC85XX_PCI1_LOWER_MEM + 1) - 1);
+
+	/* Setup outboud IO windows @ MPC85XX_PCI2_IO_BASE */
+	pci->potar2 = 0x00000000;
+	pci->potear2 = 0x00000000;
+	pci->powbar2 = (MPC85XX_PCI2_IO_BASE >> 12) & 0x000fffff;
+	/* Enable, IO R/W */
+	pci->powar2 = 0x80088000 | (__ilog2(MPC85XX_PCI1_IO_SIZE) - 1);
+
+	/* Setup 2G inbound Memory Window @ 0 */
+	pci->pitar1 = 0x00000000;
+	pci->piwbar1 = 0x00000000;
+	pci->piwar1 = 0xa0f5501e;	/* Enable, Prefetch, Local
+					   Mem, Snoop R/W, 2G */
+}
+#endif /* CONFIG_85xx_PCI2 */
+
+int mpc85xx_pci1_last_busno = 0;
+
+void __init
+mpc85xx_setup_hose(void)
+{
+	struct pci_controller *hose_a;
+#ifdef CONFIG_85xx_PCI2
+	struct pci_controller *hose_b;
+#endif
+	bd_t *binfo = (bd_t *) __res;
+
+	hose_a = pcibios_alloc_controller();
+
+	if (!hose_a)
+		return;
+
+	ppc_md.pci_swizzle = common_swizzle;
+	ppc_md.pci_map_irq = mpc85xx_map_irq;
+
+	hose_a->first_busno = 0;
+	hose_a->bus_offset = 0;
+	hose_a->last_busno = 0xff;
+
+	setup_indirect_pci(hose_a, binfo->bi_immr_base + PCI1_CFG_ADDR_OFFSET,
+			   binfo->bi_immr_base + PCI1_CFG_DATA_OFFSET);
+	hose_a->set_cfg_type = 1;
+
+	mpc85xx_setup_pci1(hose_a);
+
+	hose_a->pci_mem_offset = MPC85XX_PCI1_MEM_OFFSET;
+	hose_a->mem_space.start = MPC85XX_PCI1_LOWER_MEM;
+	hose_a->mem_space.end = MPC85XX_PCI1_UPPER_MEM;
+
+	hose_a->io_space.start = MPC85XX_PCI1_LOWER_IO;
+	hose_a->io_space.end = MPC85XX_PCI1_UPPER_IO;
+	hose_a->io_base_phys = MPC85XX_PCI1_IO_BASE;
+#ifdef CONFIG_85xx_PCI2
+	isa_io_base =
+		(unsigned long) ioremap(MPC85XX_PCI1_IO_BASE,
+					MPC85XX_PCI1_IO_SIZE +
+					MPC85XX_PCI2_IO_SIZE);
+#else
+	isa_io_base =
+		(unsigned long) ioremap(MPC85XX_PCI1_IO_BASE,
+					MPC85XX_PCI1_IO_SIZE);
+#endif
+	hose_a->io_base_virt = (void *) isa_io_base;
+
+	/* setup resources */
+	pci_init_resource(&hose_a->mem_resources[0],
+			MPC85XX_PCI1_LOWER_MEM,
+			MPC85XX_PCI1_UPPER_MEM,
+			IORESOURCE_MEM, "PCI1 host bridge");
+
+	pci_init_resource(&hose_a->io_resource,
+			MPC85XX_PCI1_LOWER_IO,
+			MPC85XX_PCI1_UPPER_IO,
+			IORESOURCE_IO, "PCI1 host bridge");
+
+	ppc_md.pci_exclude_device = mpc85xx_exclude_device;
+
+	hose_a->last_busno = pciauto_bus_scan(hose_a, hose_a->first_busno);
+
+#ifdef CONFIG_85xx_PCI2
+	hose_b = pcibios_alloc_controller();
+
+	if (!hose_b)
+		return;
+
+	hose_b->bus_offset = hose_a->last_busno + 1;
+	hose_b->first_busno = hose_a->last_busno + 1;
+	hose_b->last_busno = 0xff;
+
+	setup_indirect_pci(hose_b, binfo->bi_immr_base + PCI2_CFG_ADDR_OFFSET,
+			   binfo->bi_immr_base + PCI2_CFG_DATA_OFFSET);
+	hose_b->set_cfg_type = 1;
+
+	mpc85xx_setup_pci2(hose_b);
+
+	hose_b->pci_mem_offset = MPC85XX_PCI2_MEM_OFFSET;
+	hose_b->mem_space.start = MPC85XX_PCI2_LOWER_MEM;
+	hose_b->mem_space.end = MPC85XX_PCI2_UPPER_MEM;
+
+	hose_b->io_space.start = MPC85XX_PCI2_LOWER_IO;
+	hose_b->io_space.end = MPC85XX_PCI2_UPPER_IO;
+	hose_b->io_base_phys = MPC85XX_PCI2_IO_BASE;
+	hose_b->io_base_virt = (void *) isa_io_base + MPC85XX_PCI1_IO_SIZE;
+
+	/* setup resources */
+	pci_init_resource(&hose_b->mem_resources[0],
+			MPC85XX_PCI2_LOWER_MEM,
+			MPC85XX_PCI2_UPPER_MEM,
+			IORESOURCE_MEM, "PCI2 host bridge");
+
+	pci_init_resource(&hose_b->io_resource,
+			MPC85XX_PCI2_LOWER_IO,
+			MPC85XX_PCI2_UPPER_IO,
+			IORESOURCE_IO, "PCI2 host bridge");
+
+	hose_b->last_busno = pciauto_bus_scan(hose_b, hose_b->first_busno);
+
+	/* let board code know what the last bus number was on PCI1 */
+	mpc85xx_pci1_last_busno = hose_a->last_busno;
+#endif
+	return;
+}
+#endif /* CONFIG_PCI */
+
+
diff --git a/arch/ppc/syslib/ppc85xx_setup.h b/arch/ppc/syslib/ppc85xx_setup.h
new file mode 100644
index 000000000000..6e6cfe162faf
--- /dev/null
+++ b/arch/ppc/syslib/ppc85xx_setup.h
@@ -0,0 +1,59 @@
+/*
+ * arch/ppc/syslib/ppc85xx_setup.h
+ *
+ * MPC85XX common board definitions
+ *
+ * Maintainer: Kumar Gala <kumar.gala@freescale.com>
+ *
+ * Copyright 2004 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+
+#ifndef __PPC_SYSLIB_PPC85XX_SETUP_H
+#define __PPC_SYSLIB_PPC85XX_SETUP_H
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <asm/ppcboot.h>
+
+extern unsigned long mpc85xx_find_end_of_memory(void) __init;
+extern void mpc85xx_calibrate_decr(void) __init;
+extern void mpc85xx_early_serial_map(void) __init;
+extern void mpc85xx_restart(char *cmd);
+extern void mpc85xx_power_off(void);
+extern void mpc85xx_halt(void);
+extern void mpc85xx_setup_hose(void) __init;
+
+/* PCI config */
+#define PCI1_CFG_ADDR_OFFSET	(0x8000)
+#define PCI1_CFG_DATA_OFFSET	(0x8004)
+
+#define PCI2_CFG_ADDR_OFFSET	(0x9000)
+#define PCI2_CFG_DATA_OFFSET	(0x9004)
+
+/* Additional register for PCI-X configuration */
+#define PCIX_NEXT_CAP	0x60
+#define PCIX_CAP_ID	0x61
+#define PCIX_COMMAND	0x62
+#define PCIX_STATUS	0x64
+
+/* Serial Config */
+#ifdef CONFIG_SERIAL_MANY_PORTS
+#define RS_TABLE_SIZE  64
+#else
+#define RS_TABLE_SIZE  2
+#endif
+
+#ifndef BASE_BAUD
+#define BASE_BAUD 115200
+#endif
+
+/* Offset of CPM register space */
+#define CPM_MAP_ADDR	(CCSRBAR + MPC85xx_CPM_OFFSET)
+
+#endif /* __PPC_SYSLIB_PPC85XX_SETUP_H */
diff --git a/arch/ppc/syslib/ppc8xx_pic.c b/arch/ppc/syslib/ppc8xx_pic.c
new file mode 100644
index 000000000000..d3b01c6c97de
--- /dev/null
+++ b/arch/ppc/syslib/ppc8xx_pic.c
@@ -0,0 +1,130 @@
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/stddef.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/signal.h>
+#include <linux/interrupt.h>
+#include <asm/irq.h>
+#include <asm/8xx_immap.h>
+#include <asm/mpc8xx.h>
+#include "ppc8xx_pic.h"
+
+extern int cpm_get_irq(struct pt_regs *regs);
+
+/* The 8xx internal interrupt controller.  It is usually
+ * the only interrupt controller.  Some boards, like the MBX and
+ * Sandpoint have the 8259 as a secondary controller.  Depending
+ * upon the processor type, the internal controller can have as
+ * few as 16 interrups or as many as 64.  We could use  the
+ * "clear_bit()" and "set_bit()" functions like other platforms,
+ * but they are overkill for us.
+ */
+
+static void m8xx_mask_irq(unsigned int irq_nr)
+{
+	int	bit, word;
+
+	bit = irq_nr & 0x1f;
+	word = irq_nr >> 5;
+
+	ppc_cached_irq_mask[word] &= ~(1 << (31-bit));
+	((immap_t *)IMAP_ADDR)->im_siu_conf.sc_simask =
+						ppc_cached_irq_mask[word];
+}
+
+static void m8xx_unmask_irq(unsigned int irq_nr)
+{
+	int	bit, word;
+
+	bit = irq_nr & 0x1f;
+	word = irq_nr >> 5;
+
+	ppc_cached_irq_mask[word] |= (1 << (31-bit));
+	((immap_t *)IMAP_ADDR)->im_siu_conf.sc_simask =
+						ppc_cached_irq_mask[word];
+}
+
+static void m8xx_end_irq(unsigned int irq_nr)
+{
+	if (!(irq_desc[irq_nr].status & (IRQ_DISABLED|IRQ_INPROGRESS))
+			&& irq_desc[irq_nr].action) {
+		int bit, word;
+
+		bit = irq_nr & 0x1f;
+		word = irq_nr >> 5;
+
+		ppc_cached_irq_mask[word] |= (1 << (31-bit));
+		((immap_t *)IMAP_ADDR)->im_siu_conf.sc_simask =
+			ppc_cached_irq_mask[word];
+	}
+}
+
+
+static void m8xx_mask_and_ack(unsigned int irq_nr)
+{
+	int	bit, word;
+
+	bit = irq_nr & 0x1f;
+	word = irq_nr >> 5;
+
+	ppc_cached_irq_mask[word] &= ~(1 << (31-bit));
+	((immap_t *)IMAP_ADDR)->im_siu_conf.sc_simask =
+						ppc_cached_irq_mask[word];
+	((immap_t *)IMAP_ADDR)->im_siu_conf.sc_sipend = 1 << (31-bit);
+}
+
+struct hw_interrupt_type ppc8xx_pic = {
+	.typename = " 8xx SIU  ",
+	.enable = m8xx_unmask_irq,
+	.disable = m8xx_mask_irq,
+	.ack = m8xx_mask_and_ack,
+	.end = m8xx_end_irq,
+};
+
+/*
+ * We either return a valid interrupt or -1 if there is nothing pending
+ */
+int
+m8xx_get_irq(struct pt_regs *regs)
+{
+	int irq;
+
+	/* For MPC8xx, read the SIVEC register and shift the bits down
+	 * to get the irq number.
+	 */
+	irq = ((immap_t *)IMAP_ADDR)->im_siu_conf.sc_sivec >> 26;
+
+	/*
+	 * When we read the sivec without an interrupt to process, we will
+	 * get back SIU_LEVEL7.  In this case, return -1
+	 */
+        if (irq == CPM_INTERRUPT)
+        	irq = CPM_IRQ_OFFSET + cpm_get_irq(regs);
+#if defined(CONFIG_PCI)
+	else if (irq == ISA_BRIDGE_INT) {
+		int isa_irq;
+
+		if ((isa_irq = i8259_poll(regs)) >= 0)
+			irq = I8259_IRQ_OFFSET + isa_irq;
+	}
+#endif	/* CONFIG_PCI */
+	else if (irq == SIU_LEVEL7)
+		irq = -1;
+
+	return irq;
+}
+
+#if defined(CONFIG_MBX) && defined(CONFIG_PCI)
+/* Only the MBX uses the external 8259.  This allows us to catch standard
+ * drivers that may mess up the internal interrupt controllers, and also
+ * allow them to run without modification on the MBX.
+ */
+void mbx_i8259_action(int irq, void *dev_id, struct pt_regs *regs)
+{
+	/* This interrupt handler never actually gets called.  It is
+	 * installed only to unmask the 8259 cascade interrupt in the SIU
+	 * and to make the 8259 cascade interrupt visible in /proc/interrupts.
+	 */
+}
+#endif	/* CONFIG_PCI */
diff --git a/arch/ppc/syslib/ppc8xx_pic.h b/arch/ppc/syslib/ppc8xx_pic.h
new file mode 100644
index 000000000000..784935eac365
--- /dev/null
+++ b/arch/ppc/syslib/ppc8xx_pic.h
@@ -0,0 +1,21 @@
+#ifndef _PPC_KERNEL_PPC8xx_H
+#define _PPC_KERNEL_PPC8xx_H
+
+#include <linux/config.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+
+extern struct hw_interrupt_type ppc8xx_pic;
+
+void m8xx_pic_init(void);
+void m8xx_do_IRQ(struct pt_regs *regs,
+                 int            cpu);
+int m8xx_get_irq(struct pt_regs *regs);
+
+#ifdef CONFIG_MBX
+#include <asm/i8259.h>
+#include <asm/io.h>
+void mbx_i8259_action(int cpl, void *dev_id, struct pt_regs *regs);
+#endif
+
+#endif /* _PPC_KERNEL_PPC8xx_H */
diff --git a/arch/ppc/syslib/ppc_sys.c b/arch/ppc/syslib/ppc_sys.c
new file mode 100644
index 000000000000..879202352560
--- /dev/null
+++ b/arch/ppc/syslib/ppc_sys.c
@@ -0,0 +1,103 @@
+/*
+ * arch/ppc/syslib/ppc_sys.c
+ *
+ * PPC System library functions
+ *
+ * Maintainer: Kumar Gala <kumar.gala@freescale.com>
+ *
+ * Copyright 2005 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <asm/ppc_sys.h>
+
+int (*ppc_sys_device_fixup) (struct platform_device * pdev);
+
+static int ppc_sys_inited;
+
+void __init identify_ppc_sys_by_id(u32 id)
+{
+	unsigned int i = 0;
+	while (1) {
+		if ((ppc_sys_specs[i].mask & id) == ppc_sys_specs[i].value)
+			break;
+		i++;
+	}
+
+	cur_ppc_sys_spec = &ppc_sys_specs[i];
+
+	return;
+}
+
+void __init identify_ppc_sys_by_name(char *name)
+{
+	/* TODO */
+	return;
+}
+
+/* Update all memory resources by paddr, call before platform_device_register */
+void __init
+ppc_sys_fixup_mem_resource(struct platform_device *pdev, phys_addr_t paddr)
+{
+	int i;
+	for (i = 0; i < pdev->num_resources; i++) {
+		struct resource *r = &pdev->resource[i];
+		if ((r->flags & IORESOURCE_MEM) == IORESOURCE_MEM) {
+			r->start += paddr;
+			r->end += paddr;
+		}
+	}
+}
+
+/* Get platform_data pointer out of platform device, call before platform_device_register */
+void *__init ppc_sys_get_pdata(enum ppc_sys_devices dev)
+{
+	return ppc_sys_platform_devices[dev].dev.platform_data;
+}
+
+void ppc_sys_device_remove(enum ppc_sys_devices dev)
+{
+	unsigned int i;
+
+	if (ppc_sys_inited) {
+		platform_device_unregister(&ppc_sys_platform_devices[dev]);
+	} else {
+		if (cur_ppc_sys_spec == NULL)
+			return;
+		for (i = 0; i < cur_ppc_sys_spec->num_devices; i++)
+			if (cur_ppc_sys_spec->device_list[i] == dev)
+				cur_ppc_sys_spec->device_list[i] = -1;
+	}
+}
+
+static int __init ppc_sys_init(void)
+{
+	unsigned int i, dev_id, ret = 0;
+
+	BUG_ON(cur_ppc_sys_spec == NULL);
+
+	for (i = 0; i < cur_ppc_sys_spec->num_devices; i++) {
+		dev_id = cur_ppc_sys_spec->device_list[i];
+		if (dev_id != -1) {
+			if (ppc_sys_device_fixup != NULL)
+				ppc_sys_device_fixup(&ppc_sys_platform_devices
+						     [dev_id]);
+			if (platform_device_register
+			    (&ppc_sys_platform_devices[dev_id])) {
+				ret = 1;
+				printk(KERN_ERR
+				       "unable to register device %d\n",
+				       dev_id);
+			}
+		}
+	}
+
+	ppc_sys_inited = 1;
+	return ret;
+}
+
+subsys_initcall(ppc_sys_init);
diff --git a/arch/ppc/syslib/prep_nvram.c b/arch/ppc/syslib/prep_nvram.c
new file mode 100644
index 000000000000..2bcf8a16d1c9
--- /dev/null
+++ b/arch/ppc/syslib/prep_nvram.c
@@ -0,0 +1,141 @@
+/*
+ * arch/ppc/kernel/prep_nvram.c
+ *
+ * Copyright (C) 1998  Corey Minyard
+ *
+ * This reads the NvRAM on PReP compliant machines (generally from IBM or
+ * Motorola).  Motorola kept the format of NvRAM in their ROM, PPCBUG, the
+ * same, long after they had stopped producing PReP compliant machines.  So
+ * this code is useful in those cases as well.
+ *
+ */
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/ioport.h>
+
+#include <asm/sections.h>
+#include <asm/segment.h>
+#include <asm/io.h>
+#include <asm/machdep.h>
+#include <asm/prep_nvram.h>
+
+static char nvramData[MAX_PREP_NVRAM];
+static NVRAM_MAP *nvram=(NVRAM_MAP *)&nvramData[0];
+
+unsigned char __prep prep_nvram_read_val(int addr)
+{
+	outb(addr, PREP_NVRAM_AS0);
+	outb(addr>>8, PREP_NVRAM_AS1);
+	return inb(PREP_NVRAM_DATA);
+}
+
+void __prep prep_nvram_write_val(int           addr,
+			  unsigned char val)
+{
+	outb(addr, PREP_NVRAM_AS0);
+	outb(addr>>8, PREP_NVRAM_AS1);
+   	outb(val, PREP_NVRAM_DATA);
+}
+
+void __init init_prep_nvram(void)
+{
+	unsigned char *nvp;
+	int  i;
+	int  nvramSize;
+
+	/*
+	 * The following could fail if the NvRAM were corrupt but
+	 * we expect the boot firmware to have checked its checksum
+	 * before boot
+	 */
+	nvp = (char *) &nvram->Header;
+	for (i=0; i<sizeof(HEADER); i++)
+	{
+		*nvp = ppc_md.nvram_read_val(i);
+		nvp++;
+	}
+
+	/*
+	 * The PReP NvRAM may be any size so read in the header to
+	 * determine how much we must read in order to get the complete
+	 * GE area
+	 */
+	nvramSize=(int)nvram->Header.GEAddress+nvram->Header.GELength;
+	if(nvramSize>MAX_PREP_NVRAM)
+	{
+		/*
+		 * NvRAM is too large
+		 */
+		nvram->Header.GELength=0;
+		return;
+	}
+
+	/*
+	 * Read the remainder of the PReP NvRAM
+	 */
+	nvp = (char *) &nvram->GEArea[0];
+	for (i=sizeof(HEADER); i<nvramSize; i++)
+	{
+		*nvp = ppc_md.nvram_read_val(i);
+		nvp++;
+	}
+}
+
+__prep
+char __prep *prep_nvram_get_var(const char *name)
+{
+	char *cp;
+	int  namelen;
+
+	namelen = strlen(name);
+	cp = prep_nvram_first_var();
+	while (cp != NULL) {
+		if ((strncmp(name, cp, namelen) == 0)
+		    && (cp[namelen] == '='))
+		{
+			return cp+namelen+1;
+		}
+		cp = prep_nvram_next_var(cp);
+	}
+
+	return NULL;
+}
+
+__prep
+char __prep *prep_nvram_first_var(void)
+{
+        if (nvram->Header.GELength == 0) {
+		return NULL;
+	} else {
+		return (((char *)nvram)
+			+ ((unsigned int) nvram->Header.GEAddress));
+	}
+}
+
+__prep
+char __prep *prep_nvram_next_var(char *name)
+{
+	char *cp;
+
+
+	cp = name;
+	while (((cp - ((char *) nvram->GEArea)) < nvram->Header.GELength)
+	       && (*cp != '\0'))
+	{
+		cp++;
+	}
+
+	/* Skip over any null characters. */
+	while (((cp - ((char *) nvram->GEArea)) < nvram->Header.GELength)
+	       && (*cp == '\0'))
+	{
+		cp++;
+	}
+
+	if ((cp - ((char *) nvram->GEArea)) < nvram->Header.GELength) {
+		return cp;
+	} else {
+		return NULL;
+	}
+}
diff --git a/arch/ppc/syslib/prom.c b/arch/ppc/syslib/prom.c
new file mode 100644
index 000000000000..2c64ed627475
--- /dev/null
+++ b/arch/ppc/syslib/prom.c
@@ -0,0 +1,1447 @@
+/*
+ * Procedures for interfacing to the Open Firmware PROM on
+ * Power Macintosh computers.
+ *
+ * In particular, we are interested in the device tree
+ * and in using some of its services (exit, write to stdout).
+ *
+ * Paul Mackerras	August 1996.
+ * Copyright (C) 1996 Paul Mackerras.
+ */
+#include <stdarg.h>
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/init.h>
+#include <linux/version.h>
+#include <linux/threads.h>
+#include <linux/spinlock.h>
+#include <linux/ioport.h>
+#include <linux/pci.h>
+#include <linux/slab.h>
+#include <linux/bitops.h>
+
+#include <asm/sections.h>
+#include <asm/prom.h>
+#include <asm/page.h>
+#include <asm/processor.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+#include <asm/smp.h>
+#include <asm/bootx.h>
+#include <asm/system.h>
+#include <asm/mmu.h>
+#include <asm/pgtable.h>
+#include <asm/bootinfo.h>
+#include <asm/btext.h>
+#include <asm/pci-bridge.h>
+#include <asm/open_pic.h>
+
+
+struct pci_address {
+	unsigned a_hi;
+	unsigned a_mid;
+	unsigned a_lo;
+};
+
+struct pci_reg_property {
+	struct pci_address addr;
+	unsigned size_hi;
+	unsigned size_lo;
+};
+
+struct isa_reg_property {
+	unsigned space;
+	unsigned address;
+	unsigned size;
+};
+
+typedef unsigned long interpret_func(struct device_node *, unsigned long,
+				     int, int);
+static interpret_func interpret_pci_props;
+static interpret_func interpret_dbdma_props;
+static interpret_func interpret_isa_props;
+static interpret_func interpret_macio_props;
+static interpret_func interpret_root_props;
+
+extern char *klimit;
+
+/* Set for a newworld or CHRP machine */
+int use_of_interrupt_tree;
+struct device_node *dflt_interrupt_controller;
+int num_interrupt_controllers;
+
+int pmac_newworld;
+
+extern unsigned int rtas_entry;  /* physical pointer */
+
+extern struct device_node *allnodes;
+
+static unsigned long finish_node(struct device_node *, unsigned long,
+				 interpret_func *, int, int);
+static unsigned long finish_node_interrupts(struct device_node *, unsigned long);
+static struct device_node *find_phandle(phandle);
+
+extern void enter_rtas(void *);
+void phys_call_rtas(int, int, int, ...);
+
+extern char cmd_line[512];	/* XXX */
+extern boot_infos_t *boot_infos;
+unsigned long dev_tree_size;
+
+void __openfirmware
+phys_call_rtas(int service, int nargs, int nret, ...)
+{
+	va_list list;
+	union {
+		unsigned long words[16];
+		double align;
+	} u;
+	void (*rtas)(void *, unsigned long);
+	int i;
+
+	u.words[0] = service;
+	u.words[1] = nargs;
+	u.words[2] = nret;
+	va_start(list, nret);
+	for (i = 0; i < nargs; ++i)
+		u.words[i+3] = va_arg(list, unsigned long);
+	va_end(list);
+
+	rtas = (void (*)(void *, unsigned long)) rtas_entry;
+	rtas(&u, rtas_data);
+}
+
+/*
+ * finish_device_tree is called once things are running normally
+ * (i.e. with text and data mapped to the address they were linked at).
+ * It traverses the device tree and fills in the name, type,
+ * {n_}addrs and {n_}intrs fields of each node.
+ */
+void __init
+finish_device_tree(void)
+{
+	unsigned long mem = (unsigned long) klimit;
+	struct device_node *np;
+
+	/* All newworld pmac machines and CHRPs now use the interrupt tree */
+	for (np = allnodes; np != NULL; np = np->allnext) {
+		if (get_property(np, "interrupt-parent", NULL)) {
+			use_of_interrupt_tree = 1;
+			break;
+		}
+	}
+	if (_machine == _MACH_Pmac && use_of_interrupt_tree)
+		pmac_newworld = 1;
+
+#ifdef CONFIG_BOOTX_TEXT
+	if (boot_infos && pmac_newworld) {
+		prom_print("WARNING ! BootX/miBoot booting is not supported on this machine\n");
+		prom_print("          You should use an Open Firmware bootloader\n");
+	}
+#endif /* CONFIG_BOOTX_TEXT */
+
+	if (use_of_interrupt_tree) {
+		/*
+		 * We want to find out here how many interrupt-controller
+		 * nodes there are, and if we are booted from BootX,
+		 * we need a pointer to the first (and hopefully only)
+		 * such node.  But we can't use find_devices here since
+		 * np->name has not been set yet.  -- paulus
+		 */
+		int n = 0;
+		char *name, *ic;
+		int iclen;
+
+		for (np = allnodes; np != NULL; np = np->allnext) {
+			ic = get_property(np, "interrupt-controller", &iclen);
+			name = get_property(np, "name", NULL);
+			/* checking iclen makes sure we don't get a false
+			   match on /chosen.interrupt_controller */
+			if ((name != NULL
+			     && strcmp(name, "interrupt-controller") == 0)
+			    || (ic != NULL && iclen == 0 && strcmp(name, "AppleKiwi"))) {
+				if (n == 0)
+					dflt_interrupt_controller = np;
+				++n;
+			}
+		}
+		num_interrupt_controllers = n;
+	}
+
+	mem = finish_node(allnodes, mem, NULL, 1, 1);
+	dev_tree_size = mem - (unsigned long) allnodes;
+	klimit = (char *) mem;
+}
+
+static unsigned long __init
+finish_node(struct device_node *np, unsigned long mem_start,
+	    interpret_func *ifunc, int naddrc, int nsizec)
+{
+	struct device_node *child;
+	int *ip;
+
+	np->name = get_property(np, "name", NULL);
+	np->type = get_property(np, "device_type", NULL);
+
+	if (!np->name)
+		np->name = "<NULL>";
+	if (!np->type)
+		np->type = "<NULL>";
+
+	/* get the device addresses and interrupts */
+	if (ifunc != NULL)
+		mem_start = ifunc(np, mem_start, naddrc, nsizec);
+
+	if (use_of_interrupt_tree)
+		mem_start = finish_node_interrupts(np, mem_start);
+
+	/* Look for #address-cells and #size-cells properties. */
+	ip = (int *) get_property(np, "#address-cells", NULL);
+	if (ip != NULL)
+		naddrc = *ip;
+	ip = (int *) get_property(np, "#size-cells", NULL);
+	if (ip != NULL)
+		nsizec = *ip;
+
+	if (np->parent == NULL)
+		ifunc = interpret_root_props;
+	else if (np->type == 0)
+		ifunc = NULL;
+	else if (!strcmp(np->type, "pci") || !strcmp(np->type, "vci"))
+		ifunc = interpret_pci_props;
+	else if (!strcmp(np->type, "dbdma"))
+		ifunc = interpret_dbdma_props;
+	else if (!strcmp(np->type, "mac-io")
+		 || ifunc == interpret_macio_props)
+		ifunc = interpret_macio_props;
+	else if (!strcmp(np->type, "isa"))
+		ifunc = interpret_isa_props;
+	else if (!strcmp(np->name, "uni-n") || !strcmp(np->name, "u3"))
+		ifunc = interpret_root_props;
+	else if (!((ifunc == interpret_dbdma_props
+		    || ifunc == interpret_macio_props)
+		   && (!strcmp(np->type, "escc")
+		       || !strcmp(np->type, "media-bay"))))
+		ifunc = NULL;
+
+	/* if we were booted from BootX, convert the full name */
+	if (boot_infos
+	    && strncmp(np->full_name, "Devices:device-tree", 19) == 0) {
+		if (np->full_name[19] == 0) {
+			strcpy(np->full_name, "/");
+		} else if (np->full_name[19] == ':') {
+			char *p = np->full_name + 19;
+			np->full_name = p;
+			for (; *p; ++p)
+				if (*p == ':')
+					*p = '/';
+		}
+	}
+
+	for (child = np->child; child != NULL; child = child->sibling)
+		mem_start = finish_node(child, mem_start, ifunc,
+					naddrc, nsizec);
+
+	return mem_start;
+}
+
+/*
+ * Find the interrupt parent of a node.
+ */
+static struct device_node * __init
+intr_parent(struct device_node *p)
+{
+	phandle *parp;
+
+	parp = (phandle *) get_property(p, "interrupt-parent", NULL);
+	if (parp == NULL)
+		return p->parent;
+	p = find_phandle(*parp);
+	if (p != NULL)
+		return p;
+	/*
+	 * On a powermac booted with BootX, we don't get to know the
+	 * phandles for any nodes, so find_phandle will return NULL.
+	 * Fortunately these machines only have one interrupt controller
+	 * so there isn't in fact any ambiguity.  -- paulus
+	 */
+	if (num_interrupt_controllers == 1)
+		p = dflt_interrupt_controller;
+	return p;
+}
+
+/*
+ * Find out the size of each entry of the interrupts property
+ * for a node.
+ */
+static int __init
+prom_n_intr_cells(struct device_node *np)
+{
+	struct device_node *p;
+	unsigned int *icp;
+
+	for (p = np; (p = intr_parent(p)) != NULL; ) {
+		icp = (unsigned int *)
+			get_property(p, "#interrupt-cells", NULL);
+		if (icp != NULL)
+			return *icp;
+		if (get_property(p, "interrupt-controller", NULL) != NULL
+		    || get_property(p, "interrupt-map", NULL) != NULL) {
+			printk("oops, node %s doesn't have #interrupt-cells\n",
+			       p->full_name);
+			return 1;
+		}
+	}
+	printk("prom_n_intr_cells failed for %s\n", np->full_name);
+	return 1;
+}
+
+/*
+ * Map an interrupt from a device up to the platform interrupt
+ * descriptor.
+ */
+static int __init
+map_interrupt(unsigned int **irq, struct device_node **ictrler,
+	      struct device_node *np, unsigned int *ints, int nintrc)
+{
+	struct device_node *p, *ipar;
+	unsigned int *imap, *imask, *ip;
+	int i, imaplen, match;
+	int newintrc = 1, newaddrc = 1;
+	unsigned int *reg;
+	int naddrc;
+
+	reg = (unsigned int *) get_property(np, "reg", NULL);
+	naddrc = prom_n_addr_cells(np);
+	p = intr_parent(np);
+	while (p != NULL) {
+		if (get_property(p, "interrupt-controller", NULL) != NULL)
+			/* this node is an interrupt controller, stop here */
+			break;
+		imap = (unsigned int *)
+			get_property(p, "interrupt-map", &imaplen);
+		if (imap == NULL) {
+			p = intr_parent(p);
+			continue;
+		}
+		imask = (unsigned int *)
+			get_property(p, "interrupt-map-mask", NULL);
+		if (imask == NULL) {
+			printk("oops, %s has interrupt-map but no mask\n",
+			       p->full_name);
+			return 0;
+		}
+		imaplen /= sizeof(unsigned int);
+		match = 0;
+		ipar = NULL;
+		while (imaplen > 0 && !match) {
+			/* check the child-interrupt field */
+			match = 1;
+			for (i = 0; i < naddrc && match; ++i)
+				match = ((reg[i] ^ imap[i]) & imask[i]) == 0;
+			for (; i < naddrc + nintrc && match; ++i)
+				match = ((ints[i-naddrc] ^ imap[i]) & imask[i]) == 0;
+			imap += naddrc + nintrc;
+			imaplen -= naddrc + nintrc;
+			/* grab the interrupt parent */
+			ipar = find_phandle((phandle) *imap++);
+			--imaplen;
+			if (ipar == NULL && num_interrupt_controllers == 1)
+				/* cope with BootX not giving us phandles */
+				ipar = dflt_interrupt_controller;
+			if (ipar == NULL) {
+				printk("oops, no int parent %x in map of %s\n",
+				       imap[-1], p->full_name);
+				return 0;
+			}
+			/* find the parent's # addr and intr cells */
+			ip = (unsigned int *)
+				get_property(ipar, "#interrupt-cells", NULL);
+			if (ip == NULL) {
+				printk("oops, no #interrupt-cells on %s\n",
+				       ipar->full_name);
+				return 0;
+			}
+			newintrc = *ip;
+			ip = (unsigned int *)
+				get_property(ipar, "#address-cells", NULL);
+			newaddrc = (ip == NULL)? 0: *ip;
+			imap += newaddrc + newintrc;
+			imaplen -= newaddrc + newintrc;
+		}
+		if (imaplen < 0) {
+			printk("oops, error decoding int-map on %s, len=%d\n",
+			       p->full_name, imaplen);
+			return 0;
+		}
+		if (!match) {
+			printk("oops, no match in %s int-map for %s\n",
+			       p->full_name, np->full_name);
+			return 0;
+		}
+		p = ipar;
+		naddrc = newaddrc;
+		nintrc = newintrc;
+		ints = imap - nintrc;
+		reg = ints - naddrc;
+	}
+	if (p == NULL)
+		printk("hmmm, int tree for %s doesn't have ctrler\n",
+		       np->full_name);
+	*irq = ints;
+	*ictrler = p;
+	return nintrc;
+}
+
+/*
+ * New version of finish_node_interrupts.
+ */
+static unsigned long __init
+finish_node_interrupts(struct device_node *np, unsigned long mem_start)
+{
+	unsigned int *ints;
+	int intlen, intrcells;
+	int i, j, n, offset;
+	unsigned int *irq;
+	struct device_node *ic;
+
+	ints = (unsigned int *) get_property(np, "interrupts", &intlen);
+	if (ints == NULL)
+		return mem_start;
+	intrcells = prom_n_intr_cells(np);
+	intlen /= intrcells * sizeof(unsigned int);
+	np->n_intrs = intlen;
+	np->intrs = (struct interrupt_info *) mem_start;
+	mem_start += intlen * sizeof(struct interrupt_info);
+
+	for (i = 0; i < intlen; ++i) {
+		np->intrs[i].line = 0;
+		np->intrs[i].sense = 1;
+		n = map_interrupt(&irq, &ic, np, ints, intrcells);
+		if (n <= 0)
+			continue;
+		offset = 0;
+		/*
+		 * On a CHRP we have an 8259 which is subordinate to
+		 * the openpic in the interrupt tree, but we want the
+		 * openpic's interrupt numbers offsetted, not the 8259's.
+		 * So we apply the offset if the controller is at the
+		 * root of the interrupt tree, i.e. has no interrupt-parent.
+		 * This doesn't cope with the general case of multiple
+		 * cascaded interrupt controllers, but then neither will
+		 * irq.c at the moment either.  -- paulus
+		 * The G5 triggers that code, I add a machine test. On
+		 * those machines, we want to offset interrupts from the
+		 * second openpic by 128 -- BenH
+		 */
+		if (_machine != _MACH_Pmac && num_interrupt_controllers > 1
+		    && ic != NULL
+		    && get_property(ic, "interrupt-parent", NULL) == NULL)
+			offset = 16;
+		else if (_machine == _MACH_Pmac && num_interrupt_controllers > 1
+			 && ic != NULL && ic->parent != NULL) {
+			char *name = get_property(ic->parent, "name", NULL);
+			if (name && !strcmp(name, "u3"))
+				offset = 128;
+		}
+
+		np->intrs[i].line = irq[0] + offset;
+		if (n > 1)
+			np->intrs[i].sense = irq[1];
+		if (n > 2) {
+			printk("hmmm, got %d intr cells for %s:", n,
+			       np->full_name);
+			for (j = 0; j < n; ++j)
+				printk(" %d", irq[j]);
+			printk("\n");
+		}
+		ints += intrcells;
+	}
+
+	return mem_start;
+}
+
+/*
+ * When BootX makes a copy of the device tree from the MacOS
+ * Name Registry, it is in the format we use but all of the pointers
+ * are offsets from the start of the tree.
+ * This procedure updates the pointers.
+ */
+void __init
+relocate_nodes(void)
+{
+	unsigned long base;
+	struct device_node *np;
+	struct property *pp;
+
+#define ADDBASE(x)	(x = (typeof (x))((x)? ((unsigned long)(x) + base): 0))
+
+	base = (unsigned long) boot_infos + boot_infos->deviceTreeOffset;
+	allnodes = (struct device_node *)(base + 4);
+	for (np = allnodes; np != 0; np = np->allnext) {
+		ADDBASE(np->full_name);
+		ADDBASE(np->properties);
+		ADDBASE(np->parent);
+		ADDBASE(np->child);
+		ADDBASE(np->sibling);
+		ADDBASE(np->allnext);
+		for (pp = np->properties; pp != 0; pp = pp->next) {
+			ADDBASE(pp->name);
+			ADDBASE(pp->value);
+			ADDBASE(pp->next);
+		}
+	}
+}
+
+int
+prom_n_addr_cells(struct device_node* np)
+{
+	int* ip;
+	do {
+		if (np->parent)
+			np = np->parent;
+		ip = (int *) get_property(np, "#address-cells", NULL);
+		if (ip != NULL)
+			return *ip;
+	} while (np->parent);
+	/* No #address-cells property for the root node, default to 1 */
+	return 1;
+}
+
+int
+prom_n_size_cells(struct device_node* np)
+{
+	int* ip;
+	do {
+		if (np->parent)
+			np = np->parent;
+		ip = (int *) get_property(np, "#size-cells", NULL);
+		if (ip != NULL)
+			return *ip;
+	} while (np->parent);
+	/* No #size-cells property for the root node, default to 1 */
+	return 1;
+}
+
+static unsigned long __init
+map_addr(struct device_node *np, unsigned long space, unsigned long addr)
+{
+	int na;
+	unsigned int *ranges;
+	int rlen = 0;
+	unsigned int type;
+
+	type = (space >> 24) & 3;
+	if (type == 0)
+		return addr;
+
+	while ((np = np->parent) != NULL) {
+		if (strcmp(np->type, "pci") != 0)
+			continue;
+		/* PCI bridge: map the address through the ranges property */
+		na = prom_n_addr_cells(np);
+		ranges = (unsigned int *) get_property(np, "ranges", &rlen);
+		while ((rlen -= (na + 5) * sizeof(unsigned int)) >= 0) {
+			if (((ranges[0] >> 24) & 3) == type
+			    && ranges[2] <= addr
+			    && addr - ranges[2] < ranges[na+4]) {
+				/* ok, this matches, translate it */
+				addr += ranges[na+2] - ranges[2];
+				break;
+			}
+			ranges += na + 5;
+		}
+	}
+	return addr;
+}
+
+static unsigned long __init
+interpret_pci_props(struct device_node *np, unsigned long mem_start,
+		    int naddrc, int nsizec)
+{
+	struct address_range *adr;
+	struct pci_reg_property *pci_addrs;
+	int i, l, *ip;
+
+	pci_addrs = (struct pci_reg_property *)
+		get_property(np, "assigned-addresses", &l);
+	if (pci_addrs != 0 && l >= sizeof(struct pci_reg_property)) {
+		i = 0;
+		adr = (struct address_range *) mem_start;
+		while ((l -= sizeof(struct pci_reg_property)) >= 0) {
+			adr[i].space = pci_addrs[i].addr.a_hi;
+			adr[i].address = map_addr(np, pci_addrs[i].addr.a_hi,
+						  pci_addrs[i].addr.a_lo);
+			adr[i].size = pci_addrs[i].size_lo;
+			++i;
+		}
+		np->addrs = adr;
+		np->n_addrs = i;
+		mem_start += i * sizeof(struct address_range);
+	}
+
+	if (use_of_interrupt_tree)
+		return mem_start;
+
+	ip = (int *) get_property(np, "AAPL,interrupts", &l);
+	if (ip == 0 && np->parent)
+		ip = (int *) get_property(np->parent, "AAPL,interrupts", &l);
+	if (ip == 0)
+		ip = (int *) get_property(np, "interrupts", &l);
+	if (ip != 0) {
+		np->intrs = (struct interrupt_info *) mem_start;
+		np->n_intrs = l / sizeof(int);
+		mem_start += np->n_intrs * sizeof(struct interrupt_info);
+		for (i = 0; i < np->n_intrs; ++i) {
+			np->intrs[i].line = *ip++;
+			np->intrs[i].sense = 1;
+		}
+	}
+
+	return mem_start;
+}
+
+static unsigned long __init
+interpret_dbdma_props(struct device_node *np, unsigned long mem_start,
+		      int naddrc, int nsizec)
+{
+	struct reg_property *rp;
+	struct address_range *adr;
+	unsigned long base_address;
+	int i, l, *ip;
+	struct device_node *db;
+
+	base_address = 0;
+	for (db = np->parent; db != NULL; db = db->parent) {
+		if (!strcmp(db->type, "dbdma") && db->n_addrs != 0) {
+			base_address = db->addrs[0].address;
+			break;
+		}
+	}
+
+	rp = (struct reg_property *) get_property(np, "reg", &l);
+	if (rp != 0 && l >= sizeof(struct reg_property)) {
+		i = 0;
+		adr = (struct address_range *) mem_start;
+		while ((l -= sizeof(struct reg_property)) >= 0) {
+			adr[i].space = 2;
+			adr[i].address = rp[i].address + base_address;
+			adr[i].size = rp[i].size;
+			++i;
+		}
+		np->addrs = adr;
+		np->n_addrs = i;
+		mem_start += i * sizeof(struct address_range);
+	}
+
+	if (use_of_interrupt_tree)
+		return mem_start;
+
+	ip = (int *) get_property(np, "AAPL,interrupts", &l);
+	if (ip == 0)
+		ip = (int *) get_property(np, "interrupts", &l);
+	if (ip != 0) {
+		np->intrs = (struct interrupt_info *) mem_start;
+		np->n_intrs = l / sizeof(int);
+		mem_start += np->n_intrs * sizeof(struct interrupt_info);
+		for (i = 0; i < np->n_intrs; ++i) {
+			np->intrs[i].line = *ip++;
+			np->intrs[i].sense = 1;
+		}
+	}
+
+	return mem_start;
+}
+
+static unsigned long __init
+interpret_macio_props(struct device_node *np, unsigned long mem_start,
+		      int naddrc, int nsizec)
+{
+	struct reg_property *rp;
+	struct address_range *adr;
+	unsigned long base_address;
+	int i, l, *ip;
+	struct device_node *db;
+
+	base_address = 0;
+	for (db = np->parent; db != NULL; db = db->parent) {
+		if (!strcmp(db->type, "mac-io") && db->n_addrs != 0) {
+			base_address = db->addrs[0].address;
+			break;
+		}
+	}
+
+	rp = (struct reg_property *) get_property(np, "reg", &l);
+	if (rp != 0 && l >= sizeof(struct reg_property)) {
+		i = 0;
+		adr = (struct address_range *) mem_start;
+		while ((l -= sizeof(struct reg_property)) >= 0) {
+			adr[i].space = 2;
+			adr[i].address = rp[i].address + base_address;
+			adr[i].size = rp[i].size;
+			++i;
+		}
+		np->addrs = adr;
+		np->n_addrs = i;
+		mem_start += i * sizeof(struct address_range);
+	}
+
+	if (use_of_interrupt_tree)
+		return mem_start;
+
+	ip = (int *) get_property(np, "interrupts", &l);
+	if (ip == 0)
+		ip = (int *) get_property(np, "AAPL,interrupts", &l);
+	if (ip != 0) {
+		np->intrs = (struct interrupt_info *) mem_start;
+		np->n_intrs = l / sizeof(int);
+		for (i = 0; i < np->n_intrs; ++i) {
+			np->intrs[i].line = *ip++;
+			np->intrs[i].sense = 1;
+		}
+		mem_start += np->n_intrs * sizeof(struct interrupt_info);
+	}
+
+	return mem_start;
+}
+
+static unsigned long __init
+interpret_isa_props(struct device_node *np, unsigned long mem_start,
+		    int naddrc, int nsizec)
+{
+	struct isa_reg_property *rp;
+	struct address_range *adr;
+	int i, l, *ip;
+
+	rp = (struct isa_reg_property *) get_property(np, "reg", &l);
+	if (rp != 0 && l >= sizeof(struct isa_reg_property)) {
+		i = 0;
+		adr = (struct address_range *) mem_start;
+		while ((l -= sizeof(struct reg_property)) >= 0) {
+			adr[i].space = rp[i].space;
+			adr[i].address = rp[i].address
+				+ (adr[i].space? 0: _ISA_MEM_BASE);
+			adr[i].size = rp[i].size;
+			++i;
+		}
+		np->addrs = adr;
+		np->n_addrs = i;
+		mem_start += i * sizeof(struct address_range);
+	}
+
+	if (use_of_interrupt_tree)
+		return mem_start;
+
+	ip = (int *) get_property(np, "interrupts", &l);
+	if (ip != 0) {
+		np->intrs = (struct interrupt_info *) mem_start;
+		np->n_intrs = l / (2 * sizeof(int));
+		mem_start += np->n_intrs * sizeof(struct interrupt_info);
+		for (i = 0; i < np->n_intrs; ++i) {
+			np->intrs[i].line = *ip++;
+			np->intrs[i].sense = *ip++;
+		}
+	}
+
+	return mem_start;
+}
+
+static unsigned long __init
+interpret_root_props(struct device_node *np, unsigned long mem_start,
+		     int naddrc, int nsizec)
+{
+	struct address_range *adr;
+	int i, l, *ip;
+	unsigned int *rp;
+	int rpsize = (naddrc + nsizec) * sizeof(unsigned int);
+
+	rp = (unsigned int *) get_property(np, "reg", &l);
+	if (rp != 0 && l >= rpsize) {
+		i = 0;
+		adr = (struct address_range *) mem_start;
+		while ((l -= rpsize) >= 0) {
+			adr[i].space = (naddrc >= 2? rp[naddrc-2]: 2);
+			adr[i].address = rp[naddrc - 1];
+			adr[i].size = rp[naddrc + nsizec - 1];
+			++i;
+			rp += naddrc + nsizec;
+		}
+		np->addrs = adr;
+		np->n_addrs = i;
+		mem_start += i * sizeof(struct address_range);
+	}
+
+	if (use_of_interrupt_tree)
+		return mem_start;
+
+	ip = (int *) get_property(np, "AAPL,interrupts", &l);
+	if (ip == 0)
+		ip = (int *) get_property(np, "interrupts", &l);
+	if (ip != 0) {
+		np->intrs = (struct interrupt_info *) mem_start;
+		np->n_intrs = l / sizeof(int);
+		mem_start += np->n_intrs * sizeof(struct interrupt_info);
+		for (i = 0; i < np->n_intrs; ++i) {
+			np->intrs[i].line = *ip++;
+			np->intrs[i].sense = 1;
+		}
+	}
+
+	return mem_start;
+}
+
+/*
+ * Work out the sense (active-low level / active-high edge)
+ * of each interrupt from the device tree.
+ */
+void __init
+prom_get_irq_senses(unsigned char *senses, int off, int max)
+{
+	struct device_node *np;
+	int i, j;
+
+	/* default to level-triggered */
+	memset(senses, 1, max - off);
+	if (!use_of_interrupt_tree)
+		return;
+
+	for (np = allnodes; np != 0; np = np->allnext) {
+		for (j = 0; j < np->n_intrs; j++) {
+			i = np->intrs[j].line;
+			if (i >= off && i < max) {
+				if (np->intrs[j].sense == 1)
+					senses[i-off] = (IRQ_SENSE_LEVEL
+						| IRQ_POLARITY_NEGATIVE);
+				else
+					senses[i-off] = (IRQ_SENSE_EDGE
+						| IRQ_POLARITY_POSITIVE);
+			}
+		}
+	}
+}
+
+/*
+ * Construct and return a list of the device_nodes with a given name.
+ */
+struct device_node *
+find_devices(const char *name)
+{
+	struct device_node *head, **prevp, *np;
+
+	prevp = &head;
+	for (np = allnodes; np != 0; np = np->allnext) {
+		if (np->name != 0 && strcasecmp(np->name, name) == 0) {
+			*prevp = np;
+			prevp = &np->next;
+		}
+	}
+	*prevp = NULL;
+	return head;
+}
+
+/*
+ * Construct and return a list of the device_nodes with a given type.
+ */
+struct device_node *
+find_type_devices(const char *type)
+{
+	struct device_node *head, **prevp, *np;
+
+	prevp = &head;
+	for (np = allnodes; np != 0; np = np->allnext) {
+		if (np->type != 0 && strcasecmp(np->type, type) == 0) {
+			*prevp = np;
+			prevp = &np->next;
+		}
+	}
+	*prevp = NULL;
+	return head;
+}
+
+/*
+ * Returns all nodes linked together
+ */
+struct device_node * __openfirmware
+find_all_nodes(void)
+{
+	struct device_node *head, **prevp, *np;
+
+	prevp = &head;
+	for (np = allnodes; np != 0; np = np->allnext) {
+		*prevp = np;
+		prevp = &np->next;
+	}
+	*prevp = NULL;
+	return head;
+}
+
+/* Checks if the given "compat" string matches one of the strings in
+ * the device's "compatible" property
+ */
+int
+device_is_compatible(struct device_node *device, const char *compat)
+{
+	const char* cp;
+	int cplen, l;
+
+	cp = (char *) get_property(device, "compatible", &cplen);
+	if (cp == NULL)
+		return 0;
+	while (cplen > 0) {
+		if (strncasecmp(cp, compat, strlen(compat)) == 0)
+			return 1;
+		l = strlen(cp) + 1;
+		cp += l;
+		cplen -= l;
+	}
+
+	return 0;
+}
+
+
+/*
+ * Indicates whether the root node has a given value in its
+ * compatible property.
+ */
+int
+machine_is_compatible(const char *compat)
+{
+	struct device_node *root;
+
+	root = find_path_device("/");
+	if (root == 0)
+		return 0;
+	return device_is_compatible(root, compat);
+}
+
+/*
+ * Construct and return a list of the device_nodes with a given type
+ * and compatible property.
+ */
+struct device_node *
+find_compatible_devices(const char *type, const char *compat)
+{
+	struct device_node *head, **prevp, *np;
+
+	prevp = &head;
+	for (np = allnodes; np != 0; np = np->allnext) {
+		if (type != NULL
+		    && !(np->type != 0 && strcasecmp(np->type, type) == 0))
+			continue;
+		if (device_is_compatible(np, compat)) {
+			*prevp = np;
+			prevp = &np->next;
+		}
+	}
+	*prevp = NULL;
+	return head;
+}
+
+/*
+ * Find the device_node with a given full_name.
+ */
+struct device_node *
+find_path_device(const char *path)
+{
+	struct device_node *np;
+
+	for (np = allnodes; np != 0; np = np->allnext)
+		if (np->full_name != 0 && strcasecmp(np->full_name, path) == 0)
+			return np;
+	return NULL;
+}
+
+/*******
+ *
+ * New implementation of the OF "find" APIs, return a refcounted
+ * object, call of_node_put() when done. Currently, still lacks
+ * locking as old implementation, this is beeing done for ppc64.
+ *
+ * Note that property management will need some locking as well,
+ * this isn't dealt with yet
+ *
+ *******/
+
+/**
+ *	of_find_node_by_name - Find a node by it's "name" property
+ *	@from:	The node to start searching from or NULL, the node
+ *		you pass will not be searched, only the next one
+ *		will; typically, you pass what the previous call
+ *		returned. of_node_put() will be called on it
+ *	@name:	The name string to match against
+ *
+ *	Returns a node pointer with refcount incremented, use
+ *	of_node_put() on it when done.
+ */
+struct device_node *of_find_node_by_name(struct device_node *from,
+	const char *name)
+{
+	struct device_node *np = from ? from->allnext : allnodes;
+
+	for (; np != 0; np = np->allnext)
+		if (np->name != 0 && strcasecmp(np->name, name) == 0)
+			break;
+	if (from)
+		of_node_put(from);
+	return of_node_get(np);
+}
+
+/**
+ *	of_find_node_by_type - Find a node by it's "device_type" property
+ *	@from:	The node to start searching from or NULL, the node
+ *		you pass will not be searched, only the next one
+ *		will; typically, you pass what the previous call
+ *		returned. of_node_put() will be called on it
+ *	@name:	The type string to match against
+ *
+ *	Returns a node pointer with refcount incremented, use
+ *	of_node_put() on it when done.
+ */
+struct device_node *of_find_node_by_type(struct device_node *from,
+	const char *type)
+{
+	struct device_node *np = from ? from->allnext : allnodes;
+
+	for (; np != 0; np = np->allnext)
+		if (np->type != 0 && strcasecmp(np->type, type) == 0)
+			break;
+	if (from)
+		of_node_put(from);
+	return of_node_get(np);
+}
+
+/**
+ *	of_find_compatible_node - Find a node based on type and one of the
+ *                                tokens in it's "compatible" property
+ *	@from:		The node to start searching from or NULL, the node
+ *			you pass will not be searched, only the next one
+ *			will; typically, you pass what the previous call
+ *			returned. of_node_put() will be called on it
+ *	@type:		The type string to match "device_type" or NULL to ignore
+ *	@compatible:	The string to match to one of the tokens in the device
+ *			"compatible" list.
+ *
+ *	Returns a node pointer with refcount incremented, use
+ *	of_node_put() on it when done.
+ */
+struct device_node *of_find_compatible_node(struct device_node *from,
+	const char *type, const char *compatible)
+{
+	struct device_node *np = from ? from->allnext : allnodes;
+
+	for (; np != 0; np = np->allnext) {
+		if (type != NULL
+		    && !(np->type != 0 && strcasecmp(np->type, type) == 0))
+			continue;
+		if (device_is_compatible(np, compatible))
+			break;
+	}
+	if (from)
+		of_node_put(from);
+	return of_node_get(np);
+}
+
+/**
+ *	of_find_node_by_path - Find a node matching a full OF path
+ *	@path:	The full path to match
+ *
+ *	Returns a node pointer with refcount incremented, use
+ *	of_node_put() on it when done.
+ */
+struct device_node *of_find_node_by_path(const char *path)
+{
+	struct device_node *np = allnodes;
+
+	for (; np != 0; np = np->allnext)
+		if (np->full_name != 0 && strcasecmp(np->full_name, path) == 0)
+			break;
+	return of_node_get(np);
+}
+
+/**
+ *	of_find_all_nodes - Get next node in global list
+ *	@prev:	Previous node or NULL to start iteration
+ *		of_node_put() will be called on it
+ *
+ *	Returns a node pointer with refcount incremented, use
+ *	of_node_put() on it when done.
+ */
+struct device_node *of_find_all_nodes(struct device_node *prev)
+{
+	return of_node_get(prev ? prev->allnext : allnodes);
+}
+
+/**
+ *	of_get_parent - Get a node's parent if any
+ *	@node:	Node to get parent
+ *
+ *	Returns a node pointer with refcount incremented, use
+ *	of_node_put() on it when done.
+ */
+struct device_node *of_get_parent(const struct device_node *node)
+{
+	return node ? of_node_get(node->parent) : NULL;
+}
+
+/**
+ *	of_get_next_child - Iterate a node childs
+ *	@node:	parent node
+ *	@prev:	previous child of the parent node, or NULL to get first
+ *
+ *	Returns a node pointer with refcount incremented, use
+ *	of_node_put() on it when done.
+ */
+struct device_node *of_get_next_child(const struct device_node *node,
+				      struct device_node *prev)
+{
+	struct device_node *next = prev ? prev->sibling : node->child;
+
+	for (; next != 0; next = next->sibling)
+		if (of_node_get(next))
+			break;
+	if (prev)
+		of_node_put(prev);
+	return next;
+}
+
+/**
+ *	of_node_get - Increment refcount of a node
+ *	@node:	Node to inc refcount, NULL is supported to
+ *		simplify writing of callers
+ *
+ *	Returns the node itself or NULL if gone. Current implementation
+ *	does nothing as we don't yet do dynamic node allocation on ppc32
+ */
+struct device_node *of_node_get(struct device_node *node)
+{
+	return node;
+}
+
+/**
+ *	of_node_put - Decrement refcount of a node
+ *	@node:	Node to dec refcount, NULL is supported to
+ *		simplify writing of callers
+ *
+ *	Current implementation does nothing as we don't yet do dynamic node
+ *	allocation on ppc32
+ */
+void  of_node_put(struct device_node *node)
+{
+}
+
+/*
+ * Find the device_node with a given phandle.
+ */
+static struct device_node * __init
+find_phandle(phandle ph)
+{
+	struct device_node *np;
+
+	for (np = allnodes; np != 0; np = np->allnext)
+		if (np->node == ph)
+			return np;
+	return NULL;
+}
+
+/*
+ * Find a property with a given name for a given node
+ * and return the value.
+ */
+unsigned char *
+get_property(struct device_node *np, const char *name, int *lenp)
+{
+	struct property *pp;
+
+	for (pp = np->properties; pp != 0; pp = pp->next)
+		if (pp->name != NULL && strcmp(pp->name, name) == 0) {
+			if (lenp != 0)
+				*lenp = pp->length;
+			return pp->value;
+		}
+	return NULL;
+}
+
+/*
+ * Add a property to a node
+ */
+void __openfirmware
+prom_add_property(struct device_node* np, struct property* prop)
+{
+	struct property **next = &np->properties;
+
+	prop->next = NULL;
+	while (*next)
+		next = &(*next)->next;
+	*next = prop;
+}
+
+/* I quickly hacked that one, check against spec ! */
+static inline unsigned long __openfirmware
+bus_space_to_resource_flags(unsigned int bus_space)
+{
+	u8 space = (bus_space >> 24) & 0xf;
+	if (space == 0)
+		space = 0x02;
+	if (space == 0x02)
+		return IORESOURCE_MEM;
+	else if (space == 0x01)
+		return IORESOURCE_IO;
+	else {
+		printk(KERN_WARNING "prom.c: bus_space_to_resource_flags(), space: %x\n",
+		    	bus_space);
+		return 0;
+	}
+}
+
+static struct resource* __openfirmware
+find_parent_pci_resource(struct pci_dev* pdev, struct address_range *range)
+{
+	unsigned long mask;
+	int i;
+
+	/* Check this one */
+	mask = bus_space_to_resource_flags(range->space);
+	for (i=0; i<DEVICE_COUNT_RESOURCE; i++) {
+		if ((pdev->resource[i].flags & mask) == mask &&
+			pdev->resource[i].start <= range->address &&
+			pdev->resource[i].end > range->address) {
+				if ((range->address + range->size - 1) > pdev->resource[i].end) {
+					/* Add better message */
+					printk(KERN_WARNING "PCI/OF resource overlap !\n");
+					return NULL;
+				}
+				break;
+			}
+	}
+	if (i == DEVICE_COUNT_RESOURCE)
+		return NULL;
+	return &pdev->resource[i];
+}
+
+/*
+ * Request an OF device resource. Currently handles child of PCI devices,
+ * or other nodes attached to the root node. Ultimately, put some
+ * link to resources in the OF node.
+ */
+struct resource* __openfirmware
+request_OF_resource(struct device_node* node, int index, const char* name_postfix)
+{
+	struct pci_dev* pcidev;
+	u8 pci_bus, pci_devfn;
+	unsigned long iomask;
+	struct device_node* nd;
+	struct resource* parent;
+	struct resource *res = NULL;
+	int nlen, plen;
+
+	if (index >= node->n_addrs)
+		goto fail;
+
+	/* Sanity check on bus space */
+	iomask = bus_space_to_resource_flags(node->addrs[index].space);
+	if (iomask & IORESOURCE_MEM)
+		parent = &iomem_resource;
+	else if (iomask & IORESOURCE_IO)
+		parent = &ioport_resource;
+	else
+		goto fail;
+
+	/* Find a PCI parent if any */
+	nd = node;
+	pcidev = NULL;
+	while(nd) {
+		if (!pci_device_from_OF_node(nd, &pci_bus, &pci_devfn))
+			pcidev = pci_find_slot(pci_bus, pci_devfn);
+		if (pcidev) break;
+		nd = nd->parent;
+	}
+	if (pcidev)
+		parent = find_parent_pci_resource(pcidev, &node->addrs[index]);
+	if (!parent) {
+		printk(KERN_WARNING "request_OF_resource(%s), parent not found\n",
+			node->name);
+		goto fail;
+	}
+
+	res = __request_region(parent, node->addrs[index].address, node->addrs[index].size, NULL);
+	if (!res)
+		goto fail;
+	nlen = strlen(node->name);
+	plen = name_postfix ? strlen(name_postfix) : 0;
+	res->name = (const char *)kmalloc(nlen+plen+1, GFP_KERNEL);
+	if (res->name) {
+		strcpy((char *)res->name, node->name);
+		if (plen)
+			strcpy((char *)res->name+nlen, name_postfix);
+	}
+	return res;
+fail:
+	return NULL;
+}
+
+int __openfirmware
+release_OF_resource(struct device_node* node, int index)
+{
+	struct pci_dev* pcidev;
+	u8 pci_bus, pci_devfn;
+	unsigned long iomask, start, end;
+	struct device_node* nd;
+	struct resource* parent;
+	struct resource *res = NULL;
+
+	if (index >= node->n_addrs)
+		return -EINVAL;
+
+	/* Sanity check on bus space */
+	iomask = bus_space_to_resource_flags(node->addrs[index].space);
+	if (iomask & IORESOURCE_MEM)
+		parent = &iomem_resource;
+	else if (iomask & IORESOURCE_IO)
+		parent = &ioport_resource;
+	else
+		return -EINVAL;
+
+	/* Find a PCI parent if any */
+	nd = node;
+	pcidev = NULL;
+	while(nd) {
+		if (!pci_device_from_OF_node(nd, &pci_bus, &pci_devfn))
+			pcidev = pci_find_slot(pci_bus, pci_devfn);
+		if (pcidev) break;
+		nd = nd->parent;
+	}
+	if (pcidev)
+		parent = find_parent_pci_resource(pcidev, &node->addrs[index]);
+	if (!parent) {
+		printk(KERN_WARNING "release_OF_resource(%s), parent not found\n",
+			node->name);
+		return -ENODEV;
+	}
+
+	/* Find us in the parent and its childs */
+	res = parent->child;
+	start = node->addrs[index].address;
+	end = start + node->addrs[index].size - 1;
+	while (res) {
+		if (res->start == start && res->end == end &&
+		    (res->flags & IORESOURCE_BUSY))
+		    	break;
+		if (res->start <= start && res->end >= end)
+			res = res->child;
+		else
+			res = res->sibling;
+	}
+	if (!res)
+		return -ENODEV;
+
+	if (res->name) {
+		kfree(res->name);
+		res->name = NULL;
+	}
+	release_resource(res);
+	kfree(res);
+
+	return 0;
+}
+
+#if 0
+void __openfirmware
+print_properties(struct device_node *np)
+{
+	struct property *pp;
+	char *cp;
+	int i, n;
+
+	for (pp = np->properties; pp != 0; pp = pp->next) {
+		printk(KERN_INFO "%s", pp->name);
+		for (i = strlen(pp->name); i < 16; ++i)
+			printk(" ");
+		cp = (char *) pp->value;
+		for (i = pp->length; i > 0; --i, ++cp)
+			if ((i > 1 && (*cp < 0x20 || *cp > 0x7e))
+			    || (i == 1 && *cp != 0))
+				break;
+		if (i == 0 && pp->length > 1) {
+			/* looks like a string */
+			printk(" %s\n", (char *) pp->value);
+		} else {
+			/* dump it in hex */
+			n = pp->length;
+			if (n > 64)
+				n = 64;
+			if (pp->length % 4 == 0) {
+				unsigned int *p = (unsigned int *) pp->value;
+
+				n /= 4;
+				for (i = 0; i < n; ++i) {
+					if (i != 0 && (i % 4) == 0)
+						printk("\n                ");
+					printk(" %08x", *p++);
+				}
+			} else {
+				unsigned char *bp = pp->value;
+
+				for (i = 0; i < n; ++i) {
+					if (i != 0 && (i % 16) == 0)
+						printk("\n                ");
+					printk(" %02x", *bp++);
+				}
+			}
+			printk("\n");
+			if (pp->length > 64)
+				printk("                 ... (length = %d)\n",
+				       pp->length);
+		}
+	}
+}
+#endif
+
+static DEFINE_SPINLOCK(rtas_lock);
+
+/* this can be called after setup -- Cort */
+int __openfirmware
+call_rtas(const char *service, int nargs, int nret,
+	  unsigned long *outputs, ...)
+{
+	va_list list;
+	int i;
+	unsigned long s;
+	struct device_node *rtas;
+	int *tokp;
+	union {
+		unsigned long words[16];
+		double align;
+	} u;
+
+	rtas = find_devices("rtas");
+	if (rtas == NULL)
+		return -1;
+	tokp = (int *) get_property(rtas, service, NULL);
+	if (tokp == NULL) {
+		printk(KERN_ERR "No RTAS service called %s\n", service);
+		return -1;
+	}
+	u.words[0] = *tokp;
+	u.words[1] = nargs;
+	u.words[2] = nret;
+	va_start(list, outputs);
+	for (i = 0; i < nargs; ++i)
+		u.words[i+3] = va_arg(list, unsigned long);
+	va_end(list);
+
+	/*
+	 * RTAS doesn't use floating point.
+	 * Or at least, according to the CHRP spec we enter RTAS
+	 * with FP disabled, and it doesn't change the FP registers.
+	 *  -- paulus.
+	 */
+	spin_lock_irqsave(&rtas_lock, s);
+	enter_rtas((void *)__pa(&u));
+	spin_unlock_irqrestore(&rtas_lock, s);
+
+	if (nret > 1 && outputs != NULL)
+		for (i = 0; i < nret-1; ++i)
+			outputs[i] = u.words[i+nargs+4];
+	return u.words[nargs+3];
+}
diff --git a/arch/ppc/syslib/prom_init.c b/arch/ppc/syslib/prom_init.c
new file mode 100644
index 000000000000..2cee87137f2e
--- /dev/null
+++ b/arch/ppc/syslib/prom_init.c
@@ -0,0 +1,1002 @@
+/*
+ * Note that prom_init() and anything called from prom_init()
+ * may be running at an address that is different from the address
+ * that it was linked at.  References to static data items are
+ * handled by compiling this file with -mrelocatable-lib.
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/init.h>
+#include <linux/version.h>
+#include <linux/threads.h>
+#include <linux/spinlock.h>
+#include <linux/ioport.h>
+#include <linux/pci.h>
+#include <linux/slab.h>
+#include <linux/bitops.h>
+
+#include <asm/sections.h>
+#include <asm/prom.h>
+#include <asm/page.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+#include <asm/smp.h>
+#include <asm/bootx.h>
+#include <asm/system.h>
+#include <asm/mmu.h>
+#include <asm/pgtable.h>
+#include <asm/bootinfo.h>
+#include <asm/btext.h>
+#include <asm/pci-bridge.h>
+#include <asm/open_pic.h>
+#include <asm/cacheflush.h>
+
+#ifdef CONFIG_LOGO_LINUX_CLUT224
+#include <linux/linux_logo.h>
+extern const struct linux_logo logo_linux_clut224;
+#endif
+
+/*
+ * Properties whose value is longer than this get excluded from our
+ * copy of the device tree.  This way we don't waste space storing
+ * things like "driver,AAPL,MacOS,PowerPC" properties.  But this value
+ * does need to be big enough to ensure that we don't lose things
+ * like the interrupt-map property on a PCI-PCI bridge.
+ */
+#define MAX_PROPERTY_LENGTH	4096
+
+#ifndef FB_MAX			/* avoid pulling in all of the fb stuff */
+#define FB_MAX	8
+#endif
+
+#define ALIGNUL(x) (((x) + sizeof(unsigned long)-1) & -sizeof(unsigned long))
+
+typedef u32 prom_arg_t;
+
+struct prom_args {
+	const char *service;
+	int nargs;
+	int nret;
+	prom_arg_t args[10];
+};
+
+struct pci_address {
+	unsigned a_hi;
+	unsigned a_mid;
+	unsigned a_lo;
+};
+
+struct pci_reg_property {
+	struct pci_address addr;
+	unsigned size_hi;
+	unsigned size_lo;
+};
+
+struct pci_range {
+	struct pci_address addr;
+	unsigned phys;
+	unsigned size_hi;
+	unsigned size_lo;
+};
+
+struct isa_reg_property {
+	unsigned space;
+	unsigned address;
+	unsigned size;
+};
+
+struct pci_intr_map {
+	struct pci_address addr;
+	unsigned dunno;
+	phandle int_ctrler;
+	unsigned intr;
+};
+
+static void prom_exit(void);
+static int  call_prom(const char *service, int nargs, int nret, ...);
+static int  call_prom_ret(const char *service, int nargs, int nret,
+			  prom_arg_t *rets, ...);
+static void prom_print_hex(unsigned int v);
+static int  prom_set_color(ihandle ih, int i, int r, int g, int b);
+static int  prom_next_node(phandle *nodep);
+static unsigned long check_display(unsigned long mem);
+static void setup_disp_fake_bi(ihandle dp);
+static unsigned long copy_device_tree(unsigned long mem_start,
+				unsigned long mem_end);
+static unsigned long inspect_node(phandle node, struct device_node *dad,
+				unsigned long mem_start, unsigned long mem_end,
+				struct device_node ***allnextpp);
+static void prom_hold_cpus(unsigned long mem);
+static void prom_instantiate_rtas(void);
+static void * early_get_property(unsigned long base, unsigned long node,
+				char *prop);
+
+prom_entry prom __initdata;
+ihandle prom_chosen __initdata;
+ihandle prom_stdout __initdata;
+
+static char *prom_display_paths[FB_MAX] __initdata;
+static phandle prom_display_nodes[FB_MAX] __initdata;
+static unsigned int prom_num_displays __initdata;
+static ihandle prom_disp_node __initdata;
+char *of_stdout_device __initdata;
+
+unsigned int rtas_data;   /* physical pointer */
+unsigned int rtas_entry;  /* physical pointer */
+unsigned int rtas_size;
+unsigned int old_rtas;
+
+boot_infos_t *boot_infos;
+char *bootpath;
+char *bootdevice;
+struct device_node *allnodes;
+
+extern char *klimit;
+
+static void __init
+prom_exit(void)
+{
+	struct prom_args args;
+
+	args.service = "exit";
+	args.nargs = 0;
+	args.nret = 0;
+	prom(&args);
+	for (;;)			/* should never get here */
+		;
+}
+
+static int __init
+call_prom(const char *service, int nargs, int nret, ...)
+{
+	va_list list;
+	int i;
+	struct prom_args prom_args;
+
+	prom_args.service = service;
+	prom_args.nargs = nargs;
+	prom_args.nret = nret;
+	va_start(list, nret);
+	for (i = 0; i < nargs; ++i)
+		prom_args.args[i] = va_arg(list, prom_arg_t);
+	va_end(list);
+	for (i = 0; i < nret; ++i)
+		prom_args.args[i + nargs] = 0;
+	prom(&prom_args);
+	return prom_args.args[nargs];
+}
+
+static int __init
+call_prom_ret(const char *service, int nargs, int nret, prom_arg_t *rets, ...)
+{
+	va_list list;
+	int i;
+	struct prom_args prom_args;
+
+	prom_args.service = service;
+	prom_args.nargs = nargs;
+	prom_args.nret = nret;
+	va_start(list, rets);
+	for (i = 0; i < nargs; ++i)
+		prom_args.args[i] = va_arg(list, int);
+	va_end(list);
+	for (i = 0; i < nret; ++i)
+		prom_args.args[i + nargs] = 0;
+	prom(&prom_args);
+	for (i = 1; i < nret; ++i)
+		rets[i-1] = prom_args.args[nargs + i];
+	return prom_args.args[nargs];
+}
+
+void __init
+prom_print(const char *msg)
+{
+	const char *p, *q;
+
+	if (prom_stdout == 0)
+		return;
+
+	for (p = msg; *p != 0; p = q) {
+		for (q = p; *q != 0 && *q != '\n'; ++q)
+			;
+		if (q > p)
+			call_prom("write", 3, 1, prom_stdout, p, q - p);
+		if (*q != 0) {
+			++q;
+			call_prom("write", 3, 1, prom_stdout, "\r\n", 2);
+		}
+	}
+}
+
+static void __init
+prom_print_hex(unsigned int v)
+{
+	char buf[16];
+	int i, c;
+
+	for (i = 0; i < 8; ++i) {
+		c = (v >> ((7-i)*4)) & 0xf;
+		c += (c >= 10)? ('a' - 10): '0';
+		buf[i] = c;
+	}
+	buf[i] = ' ';
+	buf[i+1] = 0;
+	prom_print(buf);
+}
+
+static int __init
+prom_set_color(ihandle ih, int i, int r, int g, int b)
+{
+	return call_prom("call-method", 6, 1, "color!", ih, i, b, g, r);
+}
+
+static int __init
+prom_next_node(phandle *nodep)
+{
+	phandle node;
+
+	if ((node = *nodep) != 0
+	    && (*nodep = call_prom("child", 1, 1, node)) != 0)
+		return 1;
+	if ((*nodep = call_prom("peer", 1, 1, node)) != 0)
+		return 1;
+	for (;;) {
+		if ((node = call_prom("parent", 1, 1, node)) == 0)
+			return 0;
+		if ((*nodep = call_prom("peer", 1, 1, node)) != 0)
+			return 1;
+	}
+}
+
+#ifdef CONFIG_POWER4
+/*
+ * Set up a hash table with a set of entries in it to map the
+ * first 64MB of RAM.  This is used on 64-bit machines since
+ * some of them don't have BATs.
+ */
+
+static inline void make_pte(unsigned long htab, unsigned int hsize,
+			    unsigned int va, unsigned int pa, int mode)
+{
+	unsigned int *pteg;
+	unsigned int hash, i, vsid;
+
+	vsid = ((va >> 28) * 0x111) << 12;
+	hash = ((va ^ vsid) >> 5) & 0x7fff80;
+	pteg = (unsigned int *)(htab + (hash & (hsize - 1)));
+	for (i = 0; i < 8; ++i, pteg += 4) {
+		if ((pteg[1] & 1) == 0) {
+			pteg[1] = vsid | ((va >> 16) & 0xf80) | 1;
+			pteg[3] = pa | mode;
+			break;
+		}
+	}
+}
+
+extern unsigned long _SDR1;
+extern PTE *Hash;
+extern unsigned long Hash_size;
+
+static void __init
+prom_alloc_htab(void)
+{
+	unsigned int hsize;
+	unsigned long htab;
+	unsigned int addr;
+
+	/*
+	 * Because of OF bugs we can't use the "claim" client
+	 * interface to allocate memory for the hash table.
+	 * This code is only used on 64-bit PPCs, and the only
+	 * 64-bit PPCs at the moment are RS/6000s, and their
+	 * OF is based at 0xc00000 (the 12M point), so we just
+	 * arbitrarily use the 0x800000 - 0xc00000 region for the
+	 * hash table.
+	 *  -- paulus.
+	 */
+	hsize = 4 << 20;	/* POWER4 has no BATs */
+	htab = (8 << 20);
+	call_prom("claim", 3, 1, htab, hsize, 0);
+	Hash = (void *)(htab + KERNELBASE);
+	Hash_size = hsize;
+	_SDR1 = htab + __ilog2(hsize) - 18;
+
+	/*
+	 * Put in PTEs for the first 64MB of RAM
+	 */
+	memset((void *)htab, 0, hsize);
+	for (addr = 0; addr < 0x4000000; addr += 0x1000)
+		make_pte(htab, hsize, addr + KERNELBASE, addr,
+			 _PAGE_ACCESSED | _PAGE_COHERENT | PP_RWXX);
+#if 0 /* DEBUG stuff mapping the SCC */
+	make_pte(htab, hsize, 0x80013000, 0x80013000,
+		 _PAGE_ACCESSED | _PAGE_NO_CACHE | _PAGE_GUARDED | PP_RWXX);
+#endif
+}
+#endif /* CONFIG_POWER4 */
+
+
+/*
+ * If we have a display that we don't know how to drive,
+ * we will want to try to execute OF's open method for it
+ * later.  However, OF will probably fall over if we do that
+ * we've taken over the MMU.
+ * So we check whether we will need to open the display,
+ * and if so, open it now.
+ */
+static unsigned long __init
+check_display(unsigned long mem)
+{
+	phandle node;
+	ihandle ih;
+	int i, j;
+	char type[16], *path;
+	static unsigned char default_colors[] = {
+		0x00, 0x00, 0x00,
+		0x00, 0x00, 0xaa,
+		0x00, 0xaa, 0x00,
+		0x00, 0xaa, 0xaa,
+		0xaa, 0x00, 0x00,
+		0xaa, 0x00, 0xaa,
+		0xaa, 0xaa, 0x00,
+		0xaa, 0xaa, 0xaa,
+		0x55, 0x55, 0x55,
+		0x55, 0x55, 0xff,
+		0x55, 0xff, 0x55,
+		0x55, 0xff, 0xff,
+		0xff, 0x55, 0x55,
+		0xff, 0x55, 0xff,
+		0xff, 0xff, 0x55,
+		0xff, 0xff, 0xff
+	};
+	const unsigned char *clut;
+
+	prom_disp_node = 0;
+
+	for (node = 0; prom_next_node(&node); ) {
+		type[0] = 0;
+		call_prom("getprop", 4, 1, node, "device_type",
+			  type, sizeof(type));
+		if (strcmp(type, "display") != 0)
+			continue;
+		/* It seems OF doesn't null-terminate the path :-( */
+		path = (char *) mem;
+		memset(path, 0, 256);
+		if (call_prom("package-to-path", 3, 1, node, path, 255) < 0)
+			continue;
+
+		/*
+		 * If this display is the device that OF is using for stdout,
+		 * move it to the front of the list.
+		 */
+		mem += strlen(path) + 1;
+		i = prom_num_displays++;
+		if (of_stdout_device != 0 && i > 0
+		    && strcmp(of_stdout_device, path) == 0) {
+			for (; i > 0; --i) {
+				prom_display_paths[i]
+					= prom_display_paths[i-1];
+				prom_display_nodes[i]
+					= prom_display_nodes[i-1];
+			}
+		}
+		prom_display_paths[i] = path;
+		prom_display_nodes[i] = node;
+		if (i == 0)
+			prom_disp_node = node;
+		if (prom_num_displays >= FB_MAX)
+			break;
+	}
+
+	for (j=0; j<prom_num_displays; j++) {
+		path = prom_display_paths[j];
+		node = prom_display_nodes[j];
+		prom_print("opening display ");
+		prom_print(path);
+		ih = call_prom("open", 1, 1, path);
+		if (ih == 0 || ih == (ihandle) -1) {
+			prom_print("... failed\n");
+			for (i=j+1; i<prom_num_displays; i++) {
+				prom_display_paths[i-1] = prom_display_paths[i];
+				prom_display_nodes[i-1] = prom_display_nodes[i];
+			}
+			if (--prom_num_displays > 0) {
+				prom_disp_node = prom_display_nodes[j];
+				j--;
+			} else
+				prom_disp_node = 0;
+			continue;
+		} else {
+			prom_print("... ok\n");
+			call_prom("setprop", 4, 1, node, "linux,opened", 0, 0);
+
+			/*
+			 * Setup a usable color table when the appropriate
+			 * method is available.
+			 * Should update this to use set-colors.
+			 */
+			clut = default_colors;
+			for (i = 0; i < 32; i++, clut += 3)
+				if (prom_set_color(ih, i, clut[0], clut[1],
+						   clut[2]) != 0)
+					break;
+
+#ifdef CONFIG_LOGO_LINUX_CLUT224
+			clut = PTRRELOC(logo_linux_clut224.clut);
+			for (i = 0; i < logo_linux_clut224.clutsize;
+			     i++, clut += 3)
+				if (prom_set_color(ih, i + 32, clut[0],
+						   clut[1], clut[2]) != 0)
+					break;
+#endif /* CONFIG_LOGO_LINUX_CLUT224 */
+		}
+	}
+	
+	if (prom_stdout) {
+		phandle p;
+		p = call_prom("instance-to-package", 1, 1, prom_stdout);
+		if (p && p != -1) {
+			type[0] = 0;
+			call_prom("getprop", 4, 1, p, "device_type",
+				  type, sizeof(type));
+			if (strcmp(type, "display") == 0)
+				call_prom("setprop", 4, 1, p, "linux,boot-display",
+					  0, 0);
+		}
+	}
+
+	return ALIGNUL(mem);
+}
+
+/* This function will enable the early boot text when doing OF booting. This
+ * way, xmon output should work too
+ */
+static void __init
+setup_disp_fake_bi(ihandle dp)
+{
+#ifdef CONFIG_BOOTX_TEXT
+	int width = 640, height = 480, depth = 8, pitch;
+	unsigned address;
+	struct pci_reg_property addrs[8];
+	int i, naddrs;
+	char name[32];
+	char *getprop = "getprop";
+
+	prom_print("Initializing fake screen: ");
+
+	memset(name, 0, sizeof(name));
+	call_prom(getprop, 4, 1, dp, "name", name, sizeof(name));
+	name[sizeof(name)-1] = 0;
+	prom_print(name);
+	prom_print("\n");
+	call_prom(getprop, 4, 1, dp, "width", &width, sizeof(width));
+	call_prom(getprop, 4, 1, dp, "height", &height, sizeof(height));
+	call_prom(getprop, 4, 1, dp, "depth", &depth, sizeof(depth));
+	pitch = width * ((depth + 7) / 8);
+	call_prom(getprop, 4, 1, dp, "linebytes",
+		  &pitch, sizeof(pitch));
+	if (pitch == 1)
+		pitch = 0x1000;		/* for strange IBM display */
+	address = 0;
+	call_prom(getprop, 4, 1, dp, "address",
+		  &address, sizeof(address));
+	if (address == 0) {
+		/* look for an assigned address with a size of >= 1MB */
+		naddrs = call_prom(getprop, 4, 1, dp, "assigned-addresses",
+				   addrs, sizeof(addrs));
+		naddrs /= sizeof(struct pci_reg_property);
+		for (i = 0; i < naddrs; ++i) {
+			if (addrs[i].size_lo >= (1 << 20)) {
+				address = addrs[i].addr.a_lo;
+				/* use the BE aperture if possible */
+				if (addrs[i].size_lo >= (16 << 20))
+					address += (8 << 20);
+				break;
+			}
+		}
+		if (address == 0) {
+			prom_print("Failed to get address\n");
+			return;
+		}
+	}
+	/* kludge for valkyrie */
+	if (strcmp(name, "valkyrie") == 0)
+		address += 0x1000;
+
+#ifdef CONFIG_POWER4
+#if CONFIG_TASK_SIZE > 0x80000000
+#error CONFIG_TASK_SIZE cannot be above 0x80000000 with BOOTX_TEXT on G5
+#endif
+	{
+		extern boot_infos_t disp_bi;
+		unsigned long va, pa, i, offset;
+       		va = 0x90000000;
+		pa = address & 0xfffff000ul;
+		offset = address & 0x00000fff;
+
+		for (i=0; i<0x4000; i++) {  
+			make_pte((unsigned long)Hash - KERNELBASE, Hash_size, va, pa, 
+				 _PAGE_ACCESSED | _PAGE_NO_CACHE |
+				 _PAGE_GUARDED | PP_RWXX);
+			va += 0x1000;
+			pa += 0x1000;
+		}
+		btext_setup_display(width, height, depth, pitch, 0x90000000 | offset);
+		disp_bi.dispDeviceBase = (u8 *)address;
+	}
+#else /* CONFIG_POWER4 */
+	btext_setup_display(width, height, depth, pitch, address);
+	btext_prepare_BAT();
+#endif /* CONFIG_POWER4 */
+#endif /* CONFIG_BOOTX_TEXT */
+}
+
+/*
+ * Make a copy of the device tree from the PROM.
+ */
+static unsigned long __init
+copy_device_tree(unsigned long mem_start, unsigned long mem_end)
+{
+	phandle root;
+	unsigned long new_start;
+	struct device_node **allnextp;
+
+	root = call_prom("peer", 1, 1, (phandle)0);
+	if (root == (phandle)0) {
+		prom_print("couldn't get device tree root\n");
+		prom_exit();
+	}
+	allnextp = &allnodes;
+	mem_start = ALIGNUL(mem_start);
+	new_start = inspect_node(root, NULL, mem_start, mem_end, &allnextp);
+	*allnextp = NULL;
+	return new_start;
+}
+
+static unsigned long __init
+inspect_node(phandle node, struct device_node *dad,
+	     unsigned long mem_start, unsigned long mem_end,
+	     struct device_node ***allnextpp)
+{
+	int l;
+	phandle child;
+	struct device_node *np;
+	struct property *pp, **prev_propp;
+	char *prev_name, *namep;
+	unsigned char *valp;
+
+	np = (struct device_node *) mem_start;
+	mem_start += sizeof(struct device_node);
+	memset(np, 0, sizeof(*np));
+	np->node = node;
+	**allnextpp = PTRUNRELOC(np);
+	*allnextpp = &np->allnext;
+	if (dad != 0) {
+		np->parent = PTRUNRELOC(dad);
+		/* we temporarily use the `next' field as `last_child'. */
+		if (dad->next == 0)
+			dad->child = PTRUNRELOC(np);
+		else
+			dad->next->sibling = PTRUNRELOC(np);
+		dad->next = np;
+	}
+
+	/* get and store all properties */
+	prev_propp = &np->properties;
+	prev_name = "";
+	for (;;) {
+		pp = (struct property *) mem_start;
+		namep = (char *) (pp + 1);
+		pp->name = PTRUNRELOC(namep);
+		if (call_prom("nextprop", 3, 1, node, prev_name, namep) <= 0)
+			break;
+		mem_start = ALIGNUL((unsigned long)namep + strlen(namep) + 1);
+		prev_name = namep;
+		valp = (unsigned char *) mem_start;
+		pp->value = PTRUNRELOC(valp);
+		pp->length = call_prom("getprop", 4, 1, node, namep,
+				       valp, mem_end - mem_start);
+		if (pp->length < 0)
+			continue;
+#ifdef MAX_PROPERTY_LENGTH
+		if (pp->length > MAX_PROPERTY_LENGTH)
+			continue; /* ignore this property */
+#endif
+		mem_start = ALIGNUL(mem_start + pp->length);
+		*prev_propp = PTRUNRELOC(pp);
+		prev_propp = &pp->next;
+	}
+	if (np->node != 0) {
+		/* Add a "linux,phandle" property" */
+		pp = (struct property *) mem_start;
+		*prev_propp = PTRUNRELOC(pp);
+		prev_propp = &pp->next;
+		namep = (char *) (pp + 1);
+		pp->name = PTRUNRELOC(namep);
+		strcpy(namep, "linux,phandle");
+		mem_start = ALIGNUL((unsigned long)namep + strlen(namep) + 1);
+		pp->value = (unsigned char *) PTRUNRELOC(&np->node);
+		pp->length = sizeof(np->node);
+	}
+	*prev_propp = NULL;
+
+	/* get the node's full name */
+	l = call_prom("package-to-path", 3, 1, node,
+		      mem_start, mem_end - mem_start);
+	if (l >= 0) {
+		np->full_name = PTRUNRELOC((char *) mem_start);
+		*(char *)(mem_start + l) = 0;
+		mem_start = ALIGNUL(mem_start + l + 1);
+	}
+
+	/* do all our children */
+	child = call_prom("child", 1, 1, node);
+	while (child != 0) {
+		mem_start = inspect_node(child, np, mem_start, mem_end,
+					 allnextpp);
+		child = call_prom("peer", 1, 1, child);
+	}
+
+	return mem_start;
+}
+
+unsigned long smp_chrp_cpu_nr __initdata = 0;
+
+/*
+ * With CHRP SMP we need to use the OF to start the other
+ * processors so we can't wait until smp_boot_cpus (the OF is
+ * trashed by then) so we have to put the processors into
+ * a holding pattern controlled by the kernel (not OF) before
+ * we destroy the OF.
+ *
+ * This uses a chunk of high memory, puts some holding pattern
+ * code there and sends the other processors off to there until
+ * smp_boot_cpus tells them to do something.  We do that by using
+ * physical address 0x0.  The holding pattern checks that address
+ * until its cpu # is there, when it is that cpu jumps to
+ * __secondary_start().  smp_boot_cpus() takes care of setting those
+ * values.
+ *
+ * We also use physical address 0x4 here to tell when a cpu
+ * is in its holding pattern code.
+ *
+ * -- Cort
+ *
+ * Note that we have to do this if we have more than one CPU,
+ * even if this is a UP kernel.  Otherwise when we trash OF
+ * the other CPUs will start executing some random instructions
+ * and crash the system.  -- paulus
+ */
+static void __init
+prom_hold_cpus(unsigned long mem)
+{
+	extern void __secondary_hold(void);
+	unsigned long i;
+	int cpu;
+	phandle node;
+	char type[16], *path;
+	unsigned int reg;
+
+	/*
+	 * XXX: hack to make sure we're chrp, assume that if we're
+	 *      chrp we have a device_type property -- Cort
+	 */
+	node = call_prom("finddevice", 1, 1, "/");
+	if (call_prom("getprop", 4, 1, node,
+		      "device_type", type, sizeof(type)) <= 0)
+		return;
+
+	/* copy the holding pattern code to someplace safe (0) */
+	/* the holding pattern is now within the first 0x100
+	   bytes of the kernel image -- paulus */
+	memcpy((void *)0, _stext, 0x100);
+	flush_icache_range(0, 0x100);
+
+	/* look for cpus */
+	*(unsigned long *)(0x0) = 0;
+	asm volatile("dcbf 0,%0": : "r" (0) : "memory");
+	for (node = 0; prom_next_node(&node); ) {
+		type[0] = 0;
+		call_prom("getprop", 4, 1, node, "device_type",
+			  type, sizeof(type));
+		if (strcmp(type, "cpu") != 0)
+			continue;
+		path = (char *) mem;
+		memset(path, 0, 256);
+		if (call_prom("package-to-path", 3, 1, node, path, 255) < 0)
+			continue;
+		reg = -1;
+		call_prom("getprop", 4, 1, node, "reg", &reg, sizeof(reg));
+		cpu = smp_chrp_cpu_nr++;
+#ifdef CONFIG_SMP
+		smp_hw_index[cpu] = reg;
+#endif /* CONFIG_SMP */
+		/* XXX: hack - don't start cpu 0, this cpu -- Cort */
+		if (cpu == 0)
+			continue;
+		prom_print("starting cpu ");
+		prom_print(path);
+		*(ulong *)(0x4) = 0;
+		call_prom("start-cpu", 3, 0, node,
+			  (char *)__secondary_hold - _stext, cpu);
+		prom_print("...");
+		for ( i = 0 ; (i < 10000) && (*(ulong *)(0x4) == 0); i++ )
+			;
+		if (*(ulong *)(0x4) == cpu)
+			prom_print("ok\n");
+		else {
+			prom_print("failed: ");
+			prom_print_hex(*(ulong *)0x4);
+			prom_print("\n");
+		}
+	}
+}
+
+static void __init
+prom_instantiate_rtas(void)
+{
+	ihandle prom_rtas;
+	prom_arg_t result;
+
+	prom_rtas = call_prom("finddevice", 1, 1, "/rtas");
+	if (prom_rtas == -1)
+		return;
+
+	rtas_size = 0;
+	call_prom("getprop", 4, 1, prom_rtas,
+		  "rtas-size", &rtas_size, sizeof(rtas_size));
+	prom_print("instantiating rtas");
+	if (rtas_size == 0) {
+		rtas_data = 0;
+	} else {
+		/*
+		 * Ask OF for some space for RTAS.
+		 * Actually OF has bugs so we just arbitrarily
+		 * use memory at the 6MB point.
+		 */
+		rtas_data = 6 << 20;
+		prom_print(" at ");
+		prom_print_hex(rtas_data);
+	}
+
+	prom_rtas = call_prom("open", 1, 1, "/rtas");
+	prom_print("...");
+	rtas_entry = 0;
+	if (call_prom_ret("call-method", 3, 2, &result,
+			  "instantiate-rtas", prom_rtas, rtas_data) == 0)
+		rtas_entry = result;
+	if ((rtas_entry == -1) || (rtas_entry == 0))
+		prom_print(" failed\n");
+	else
+		prom_print(" done\n");
+}
+
+/*
+ * We enter here early on, when the Open Firmware prom is still
+ * handling exceptions and the MMU hash table for us.
+ */
+unsigned long __init
+prom_init(int r3, int r4, prom_entry pp)
+{
+	unsigned long mem;
+	ihandle prom_mmu;
+	unsigned long offset = reloc_offset();
+	int i, l;
+	char *p, *d;
+ 	unsigned long phys;
+	prom_arg_t result[3];
+	char model[32];
+	phandle node;
+	int rc;
+
+ 	/* Default */
+ 	phys = (unsigned long) &_stext;
+
+	/* First get a handle for the stdout device */
+	prom = pp;
+	prom_chosen = call_prom("finddevice", 1, 1, "/chosen");
+	if (prom_chosen == -1)
+		prom_exit();
+	if (call_prom("getprop", 4, 1, prom_chosen, "stdout",
+		      &prom_stdout, sizeof(prom_stdout)) <= 0)
+		prom_exit();
+
+	/* Get the full OF pathname of the stdout device */
+	mem = (unsigned long) klimit + offset;
+	p = (char *) mem;
+	memset(p, 0, 256);
+	call_prom("instance-to-path", 3, 1, prom_stdout, p, 255);
+	of_stdout_device = p;
+	mem += strlen(p) + 1;
+
+	/* Get the boot device and translate it to a full OF pathname. */
+	p = (char *) mem;
+	l = call_prom("getprop", 4, 1, prom_chosen, "bootpath", p, 1<<20);
+	if (l > 0) {
+		p[l] = 0;	/* should already be null-terminated */
+		bootpath = PTRUNRELOC(p);
+		mem += l + 1;
+		d = (char *) mem;
+		*d = 0;
+		call_prom("canon", 3, 1, p, d, 1<<20);
+		bootdevice = PTRUNRELOC(d);
+		mem = ALIGNUL(mem + strlen(d) + 1);
+	}
+
+	prom_instantiate_rtas();
+
+#ifdef CONFIG_POWER4
+	/*
+	 * Find out how much memory we have and allocate a
+	 * suitably-sized hash table.
+	 */
+	prom_alloc_htab();
+#endif
+	mem = check_display(mem);
+
+	prom_print("copying OF device tree...");
+	mem = copy_device_tree(mem, mem + (1<<20));
+	prom_print("done\n");
+
+	prom_hold_cpus(mem);
+
+	klimit = (char *) (mem - offset);
+
+	node = call_prom("finddevice", 1, 1, "/");
+	rc = call_prom("getprop", 4, 1, node, "model", model, sizeof(model));
+	if (rc > 0 && !strncmp (model, "Pegasos", 7)
+		&& strncmp (model, "Pegasos2", 8)) {
+		/* Pegasos 1 has a broken translate method in the OF,
+		 * and furthermore the BATs are mapped 1:1 so the phys
+		 * address calculated above is correct, so let's use
+		 * it directly.
+		 */
+	} else if (offset == 0) {
+		/* If we are already running at 0xc0000000, we assume we were
+	 	 * loaded by an OF bootloader which did set a BAT for us.
+	 	 * This breaks OF translate so we force phys to be 0.
+	 	 */
+		prom_print("(already at 0xc0000000) phys=0\n");
+		phys = 0;
+	} else if (call_prom("getprop", 4, 1, prom_chosen, "mmu",
+			     &prom_mmu, sizeof(prom_mmu)) <= 0) {
+		prom_print(" no MMU found\n");
+	} else if (call_prom_ret("call-method", 4, 4, result, "translate",
+				 prom_mmu, &_stext, 1) != 0) {
+		prom_print(" (translate failed)\n");
+	} else {
+		/* We assume the phys. address size is 3 cells */
+		phys = result[2];
+	}
+
+	if (prom_disp_node != 0)
+		setup_disp_fake_bi(prom_disp_node);
+
+	/* Use quiesce call to get OF to shut down any devices it's using */
+	prom_print("Calling quiesce ...\n");
+	call_prom("quiesce", 0, 0);
+
+	/* Relocate various pointers which will be used once the
+	   kernel is running at the address it was linked at. */
+	for (i = 0; i < prom_num_displays; ++i)
+		prom_display_paths[i] = PTRUNRELOC(prom_display_paths[i]);
+
+#ifdef CONFIG_SERIAL_CORE_CONSOLE
+	/* Relocate the of stdout for console autodetection */
+	of_stdout_device = PTRUNRELOC(of_stdout_device);
+#endif
+
+	prom_print("returning 0x");
+	prom_print_hex(phys);
+	prom_print("from prom_init\n");
+	prom_stdout = 0;
+
+	return phys;
+}
+
+/*
+ * early_get_property is used to access the device tree image prepared
+ * by BootX very early on, before the pointers in it have been relocated.
+ */
+static void * __init
+early_get_property(unsigned long base, unsigned long node, char *prop)
+{
+	struct device_node *np = (struct device_node *)(base + node);
+	struct property *pp;
+
+	for (pp = np->properties; pp != 0; pp = pp->next) {
+		pp = (struct property *) (base + (unsigned long)pp);
+		if (strcmp((char *)((unsigned long)pp->name + base),
+			   prop) == 0) {
+			return (void *)((unsigned long)pp->value + base);
+		}
+	}
+	return NULL;
+}
+
+/* Is boot-info compatible ? */
+#define BOOT_INFO_IS_COMPATIBLE(bi)		((bi)->compatible_version <= BOOT_INFO_VERSION)
+#define BOOT_INFO_IS_V2_COMPATIBLE(bi)	((bi)->version >= 2)
+#define BOOT_INFO_IS_V4_COMPATIBLE(bi)	((bi)->version >= 4)
+
+void __init
+bootx_init(unsigned long r4, unsigned long phys)
+{
+	boot_infos_t *bi = (boot_infos_t *) r4;
+	unsigned long space;
+	unsigned long ptr, x;
+	char *model;
+
+	boot_infos = PTRUNRELOC(bi);
+	if (!BOOT_INFO_IS_V2_COMPATIBLE(bi))
+		bi->logicalDisplayBase = NULL;
+
+#ifdef CONFIG_BOOTX_TEXT
+	btext_init(bi);
+
+	/*
+	 * Test if boot-info is compatible.  Done only in config
+	 * CONFIG_BOOTX_TEXT since there is nothing much we can do
+	 * with an incompatible version, except display a message
+	 * and eventually hang the processor...
+	 *
+	 * I'll try to keep enough of boot-info compatible in the
+	 * future to always allow display of this message;
+	 */
+	if (!BOOT_INFO_IS_COMPATIBLE(bi)) {
+		btext_drawstring(" !!! WARNING - Incompatible version of BootX !!!\n\n\n");
+		btext_flushscreen();
+	}
+#endif	/* CONFIG_BOOTX_TEXT */
+
+	/* New BootX enters kernel with MMU off, i/os are not allowed
+	   here. This hack will have been done by the boostrap anyway.
+	*/
+	if (bi->version < 4) {
+		/*
+		 * XXX If this is an iMac, turn off the USB controller.
+		 */
+		model = (char *) early_get_property
+			(r4 + bi->deviceTreeOffset, 4, "model");
+		if (model
+		    && (strcmp(model, "iMac,1") == 0
+			|| strcmp(model, "PowerMac1,1") == 0)) {
+			out_le32((unsigned *)0x80880008, 1);	/* XXX */
+		}
+	}
+
+	/* Move klimit to enclose device tree, args, ramdisk, etc... */
+	if (bi->version < 5) {
+		space = bi->deviceTreeOffset + bi->deviceTreeSize;
+		if (bi->ramDisk)
+			space = bi->ramDisk + bi->ramDiskSize;
+	} else
+		space = bi->totalParamsSize;
+	klimit = PTRUNRELOC((char *) bi + space);
+
+	/* New BootX will have flushed all TLBs and enters kernel with
+	   MMU switched OFF, so this should not be useful anymore.
+	*/
+	if (bi->version < 4) {
+		/*
+		 * Touch each page to make sure the PTEs for them
+		 * are in the hash table - the aim is to try to avoid
+		 * getting DSI exceptions while copying the kernel image.
+		 */
+		for (ptr = ((unsigned long) &_stext) & PAGE_MASK;
+		     ptr < (unsigned long)bi + space; ptr += PAGE_SIZE)
+			x = *(volatile unsigned long *)ptr;
+	}
+
+#ifdef CONFIG_BOOTX_TEXT
+	/*
+	 * Note that after we call btext_prepare_BAT, we can't do
+	 * prom_draw*, flushscreen or clearscreen until we turn the MMU
+	 * on, since btext_prepare_BAT sets disp_bi.logicalDisplayBase
+	 * to a virtual address.
+	 */
+	btext_prepare_BAT();
+#endif
+}
diff --git a/arch/ppc/syslib/qspan_pci.c b/arch/ppc/syslib/qspan_pci.c
new file mode 100644
index 000000000000..57f4ed5e5ae1
--- /dev/null
+++ b/arch/ppc/syslib/qspan_pci.c
@@ -0,0 +1,381 @@
+/*
+ * QSpan pci routines.
+ * Most 8xx boards use the QSpan PCI bridge.  The config address register
+ * is located 0x500 from the base of the bridge control/status registers.
+ * The data register is located at 0x504.
+ * This is a two step operation.  First, the address register is written,
+ * then the data register is read/written as required.
+ * I don't know what to do about interrupts (yet).
+ *
+ * The RPX Classic implementation shares a chip select for normal
+ * PCI access and QSpan control register addresses.  The selection is
+ * further selected by a bit setting in a board control register.
+ * Although it should happen, we disable interrupts during this operation
+ * to make sure some driver doesn't accidentally access the PCI while
+ * we have switched the chip select.
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/string.h>
+#include <linux/init.h>
+
+#include <asm/io.h>
+#include <asm/mpc8xx.h>
+#include <asm/system.h>
+#include <asm/machdep.h>
+#include <asm/pci-bridge.h>
+
+
+/*
+ * This blows......
+ * When reading the configuration space, if something does not respond
+ * the bus times out and we get a machine check interrupt.  So, the
+ * good ol' exception tables come to mind to trap it and return some
+ * value.
+ *
+ * On an error we just return a -1, since that is what the caller wants
+ * returned if nothing is present.  I copied this from __get_user_asm,
+ * with the only difference of returning -1 instead of EFAULT.
+ * There is an associated hack in the machine check trap code.
+ *
+ * The QSPAN is also a big endian device, that is it makes the PCI
+ * look big endian to us.  This presents a problem for the Linux PCI
+ * functions, which assume little endian.  For example, we see the
+ * first 32-bit word like this:
+ *	------------------------
+ *	| Device ID | Vendor ID |
+ *	------------------------
+ * If we read/write as a double word, that's OK.  But in our world,
+ * when read as a word, device ID is at location 0, not location 2 as
+ * the little endian PCI would believe.  We have to switch bits in
+ * the PCI addresses given to us to get the data to/from the correct
+ * byte lanes.
+ *
+ * The QSPAN only supports 4 bits of "slot" in the dev_fn instead of 5.
+ * It always forces the MS bit to zero.  Therefore, dev_fn values
+ * greater than 128 are returned as "no device found" errors.
+ *
+ * The QSPAN can only perform long word (32-bit) configuration cycles.
+ * The "offset" must have the two LS bits set to zero.  Read operations
+ * require we read the entire word and then sort out what should be
+ * returned.  Write operations other than long word require that we
+ * read the long word, update the proper word or byte, then write the
+ * entire long word back.
+ *
+ * PCI Bridge hack.  We assume (correctly) that bus 0 is the primary
+ * PCI bus from the QSPAN.  If we are called with a bus number other
+ * than zero, we create a Type 1 configuration access that a downstream
+ * PCI bridge will interpret.
+ */
+
+#define __get_qspan_pci_config(x, addr, op)		\
+	__asm__ __volatile__(				\
+		"1:	"op" %0,0(%1)\n"		\
+		"	eieio\n"			\
+		"2:\n"					\
+		".section .fixup,\"ax\"\n"		\
+		"3:	li %0,-1\n"			\
+		"	b 2b\n"				\
+		".section __ex_table,\"a\"\n"		\
+		"	.align 2\n"			\
+		"	.long 1b,3b\n"			\
+		".text"					\
+		: "=r"(x) : "r"(addr) : " %0")
+
+#define QS_CONFIG_ADDR	((volatile uint *)(PCI_CSR_ADDR + 0x500))
+#define QS_CONFIG_DATA	((volatile uint *)(PCI_CSR_ADDR + 0x504))
+
+#define mk_config_addr(bus, dev, offset) \
+	(((bus)<<16) | ((dev)<<8) | (offset & 0xfc))
+
+#define mk_config_type1(bus, dev, offset) \
+	mk_config_addr(bus, dev, offset) | 1;
+
+static spinlock_t pcibios_lock = SPIN_LOCK_UNLOCKED;
+
+int qspan_pcibios_read_config_byte(unsigned char bus, unsigned char dev_fn,
+				  unsigned char offset, unsigned char *val)
+{
+	uint	temp;
+	u_char	*cp;
+#ifdef CONFIG_RPXCLASSIC
+	unsigned long flags;
+#endif
+
+	if ((bus > 7) || (dev_fn > 127)) {
+		*val = 0xff;
+		return PCIBIOS_DEVICE_NOT_FOUND;
+	}
+
+#ifdef CONFIG_RPXCLASSIC
+	/* disable interrupts */
+	spin_lock_irqsave(&pcibios_lock, flags);
+	*((uint *)RPX_CSR_ADDR) &= ~BCSR2_QSPACESEL;
+	eieio();
+#endif
+
+	if (bus == 0)
+		*QS_CONFIG_ADDR = mk_config_addr(bus, dev_fn, offset);
+	else
+		*QS_CONFIG_ADDR = mk_config_type1(bus, dev_fn, offset);
+	__get_qspan_pci_config(temp, QS_CONFIG_DATA, "lwz");
+
+#ifdef CONFIG_RPXCLASSIC
+	*((uint *)RPX_CSR_ADDR) |= BCSR2_QSPACESEL;
+	eieio();
+	spin_unlock_irqrestore(&pcibios_lock, flags);
+#endif
+
+	offset ^= 0x03;
+	cp = ((u_char *)&temp) + (offset & 0x03);
+	*val = *cp;
+	return PCIBIOS_SUCCESSFUL;
+}
+
+int qspan_pcibios_read_config_word(unsigned char bus, unsigned char dev_fn,
+				  unsigned char offset, unsigned short *val)
+{
+	uint	temp;
+	ushort	*sp;
+#ifdef CONFIG_RPXCLASSIC
+	unsigned long flags;
+#endif
+
+	if ((bus > 7) || (dev_fn > 127)) {
+		*val = 0xffff;
+		return PCIBIOS_DEVICE_NOT_FOUND;
+	}
+
+#ifdef CONFIG_RPXCLASSIC
+	/* disable interrupts */
+	spin_lock_irqsave(&pcibios_lock, flags);
+	*((uint *)RPX_CSR_ADDR) &= ~BCSR2_QSPACESEL;
+	eieio();
+#endif
+
+	if (bus == 0)
+		*QS_CONFIG_ADDR = mk_config_addr(bus, dev_fn, offset);
+	else
+		*QS_CONFIG_ADDR = mk_config_type1(bus, dev_fn, offset);
+	__get_qspan_pci_config(temp, QS_CONFIG_DATA, "lwz");
+	offset ^= 0x02;
+
+#ifdef CONFIG_RPXCLASSIC
+	*((uint *)RPX_CSR_ADDR) |= BCSR2_QSPACESEL;
+	eieio();
+	spin_unlock_irqrestore(&pcibios_lock, flags);
+#endif
+
+	sp = ((ushort *)&temp) + ((offset >> 1) & 1);
+	*val = *sp;
+	return PCIBIOS_SUCCESSFUL;
+}
+
+int qspan_pcibios_read_config_dword(unsigned char bus, unsigned char dev_fn,
+				   unsigned char offset, unsigned int *val)
+{
+#ifdef CONFIG_RPXCLASSIC
+	unsigned long flags;
+#endif
+
+	if ((bus > 7) || (dev_fn > 127)) {
+		*val = 0xffffffff;
+		return PCIBIOS_DEVICE_NOT_FOUND;
+	}
+
+#ifdef CONFIG_RPXCLASSIC
+	/* disable interrupts */
+	spin_lock_irqsave(&pcibios_lock, flags);
+	*((uint *)RPX_CSR_ADDR) &= ~BCSR2_QSPACESEL;
+	eieio();
+#endif
+
+	if (bus == 0)
+		*QS_CONFIG_ADDR = mk_config_addr(bus, dev_fn, offset);
+	else
+		*QS_CONFIG_ADDR = mk_config_type1(bus, dev_fn, offset);
+	__get_qspan_pci_config(*val, QS_CONFIG_DATA, "lwz");
+
+#ifdef CONFIG_RPXCLASSIC
+	*((uint *)RPX_CSR_ADDR) |= BCSR2_QSPACESEL;
+	eieio();
+	spin_unlock_irqrestore(&pcibios_lock, flags);
+#endif
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+int qspan_pcibios_write_config_byte(unsigned char bus, unsigned char dev_fn,
+				   unsigned char offset, unsigned char val)
+{
+	uint	temp;
+	u_char	*cp;
+#ifdef CONFIG_RPXCLASSIC
+	unsigned long flags;
+#endif
+
+	if ((bus > 7) || (dev_fn > 127))
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	qspan_pcibios_read_config_dword(bus, dev_fn, offset, &temp);
+
+	offset ^= 0x03;
+	cp = ((u_char *)&temp) + (offset & 0x03);
+	*cp = val;
+
+#ifdef CONFIG_RPXCLASSIC
+	/* disable interrupts */
+	spin_lock_irqsave(&pcibios_lock, flags);
+	*((uint *)RPX_CSR_ADDR) &= ~BCSR2_QSPACESEL;
+	eieio();
+#endif
+
+	if (bus == 0)
+		*QS_CONFIG_ADDR = mk_config_addr(bus, dev_fn, offset);
+	else
+		*QS_CONFIG_ADDR = mk_config_type1(bus, dev_fn, offset);
+	*QS_CONFIG_DATA = temp;
+
+#ifdef CONFIG_RPXCLASSIC
+	*((uint *)RPX_CSR_ADDR) |= BCSR2_QSPACESEL;
+	eieio();
+	spin_unlock_irqrestore(&pcibios_lock, flags);
+#endif
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+int qspan_pcibios_write_config_word(unsigned char bus, unsigned char dev_fn,
+				   unsigned char offset, unsigned short val)
+{
+	uint	temp;
+	ushort	*sp;
+#ifdef CONFIG_RPXCLASSIC
+	unsigned long flags;
+#endif
+
+	if ((bus > 7) || (dev_fn > 127))
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	qspan_pcibios_read_config_dword(bus, dev_fn, offset, &temp);
+
+	offset ^= 0x02;
+	sp = ((ushort *)&temp) + ((offset >> 1) & 1);
+	*sp = val;
+
+#ifdef CONFIG_RPXCLASSIC
+	/* disable interrupts */
+	spin_lock_irqsave(&pcibios_lock, flags);
+	*((uint *)RPX_CSR_ADDR) &= ~BCSR2_QSPACESEL;
+	eieio();
+#endif
+
+	if (bus == 0)
+		*QS_CONFIG_ADDR = mk_config_addr(bus, dev_fn, offset);
+	else
+		*QS_CONFIG_ADDR = mk_config_type1(bus, dev_fn, offset);
+	*QS_CONFIG_DATA = temp;
+
+#ifdef CONFIG_RPXCLASSIC
+	*((uint *)RPX_CSR_ADDR) |= BCSR2_QSPACESEL;
+	eieio();
+	spin_unlock_irqrestore(&pcibios_lock, flags);
+#endif
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+int qspan_pcibios_write_config_dword(unsigned char bus, unsigned char dev_fn,
+				    unsigned char offset, unsigned int val)
+{
+#ifdef CONFIG_RPXCLASSIC
+	unsigned long flags;
+#endif
+
+	if ((bus > 7) || (dev_fn > 127))
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+#ifdef CONFIG_RPXCLASSIC
+	/* disable interrupts */
+	spin_lock_irqsave(&pcibios_lock, flags);
+	*((uint *)RPX_CSR_ADDR) &= ~BCSR2_QSPACESEL;
+	eieio();
+#endif
+
+	if (bus == 0)
+		*QS_CONFIG_ADDR = mk_config_addr(bus, dev_fn, offset);
+	else
+		*QS_CONFIG_ADDR = mk_config_type1(bus, dev_fn, offset);
+	*(unsigned int *)QS_CONFIG_DATA = val;
+
+#ifdef CONFIG_RPXCLASSIC
+	*((uint *)RPX_CSR_ADDR) |= BCSR2_QSPACESEL;
+	eieio();
+	spin_unlock_irqrestore(&pcibios_lock, flags);
+#endif
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+int qspan_pcibios_find_device(unsigned short vendor, unsigned short dev_id,
+			     unsigned short index, unsigned char *bus_ptr,
+			     unsigned char *dev_fn_ptr)
+{
+    int num, devfn;
+    unsigned int x, vendev;
+
+    if (vendor == 0xffff)
+	return PCIBIOS_BAD_VENDOR_ID;
+    vendev = (dev_id << 16) + vendor;
+    num = 0;
+    for (devfn = 0;  devfn < 32;  devfn++) {
+	qspan_pcibios_read_config_dword(0, devfn<<3, PCI_VENDOR_ID, &x);
+	if (x == vendev) {
+	    if (index == num) {
+		*bus_ptr = 0;
+		*dev_fn_ptr = devfn<<3;
+		return PCIBIOS_SUCCESSFUL;
+	    }
+	    ++num;
+	}
+    }
+    return PCIBIOS_DEVICE_NOT_FOUND;
+}
+
+int qspan_pcibios_find_class(unsigned int class_code, unsigned short index,
+			    unsigned char *bus_ptr, unsigned char *dev_fn_ptr)
+{
+    int devnr, x, num;
+
+    num = 0;
+    for (devnr = 0;  devnr < 32;  devnr++) {
+	qspan_pcibios_read_config_dword(0, devnr<<3, PCI_CLASS_REVISION, &x);
+	if ((x>>8) == class_code) {
+	    if (index == num) {
+		*bus_ptr = 0;
+		*dev_fn_ptr = devnr<<3;
+		return PCIBIOS_SUCCESSFUL;
+	    }
+	    ++num;
+	}
+    }
+    return PCIBIOS_DEVICE_NOT_FOUND;
+}
+
+void __init
+m8xx_pcibios_fixup(void))
+{
+   /* Lots to do here, all board and configuration specific. */
+}
+
+void __init
+m8xx_setup_pci_ptrs(void))
+{
+	set_config_access_method(qspan);
+
+	ppc_md.pcibios_fixup = m8xx_pcibios_fixup;
+}
+
diff --git a/arch/ppc/syslib/todc_time.c b/arch/ppc/syslib/todc_time.c
new file mode 100644
index 000000000000..1323c641c19d
--- /dev/null
+++ b/arch/ppc/syslib/todc_time.c
@@ -0,0 +1,513 @@
+/*
+ * arch/ppc/syslib/todc_time.c
+ *
+ * Time of Day Clock support for the M48T35, M48T37, M48T59, and MC146818
+ * Real Time Clocks/Timekeepers.
+ *
+ * Author: Mark A. Greer
+ *         mgreer@mvista.com
+ *
+ * 2001-2004 (c) MontaVista, Software, Inc.  This file is licensed under
+ * the terms of the GNU General Public License version 2.  This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/time.h>
+#include <linux/timex.h>
+#include <linux/bcd.h>
+#include <linux/mc146818rtc.h>
+
+#include <asm/machdep.h>
+#include <asm/io.h>
+#include <asm/time.h>
+#include <asm/todc.h>
+
+/*
+ * Depending on the hardware on your board and your board design, the
+ * RTC/NVRAM may be accessed either directly (like normal memory) or via
+ * address/data registers.  If your board uses the direct method, set
+ * 'nvram_data' to the base address of your nvram and leave 'nvram_as0' and
+ * 'nvram_as1' NULL.  If your board uses address/data regs to access nvram,
+ * set 'nvram_as0' to the address of the lower byte, set 'nvram_as1' to the
+ * address of the upper byte (leave NULL if using mc146818), and set
+ * 'nvram_data' to the address of the 8-bit data register.
+ *
+ * In order to break the assumption that the RTC and NVRAM are accessed by
+ * the same mechanism, you need to explicitly set 'ppc_md.rtc_read_val' and
+ * 'ppc_md.rtc_write_val', otherwise the values of 'ppc_md.rtc_read_val'
+ * and 'ppc_md.rtc_write_val' will be used.
+ *
+ * Note: Even though the documentation for the various RTC chips say that it
+ * 	 take up to a second before it starts updating once the 'R' bit is
+ * 	 cleared, they always seem to update even though we bang on it many
+ * 	 times a second.  This is true, except for the Dallas Semi 1746/1747
+ * 	 (possibly others).  Those chips seem to have a real problem whenever
+ * 	 we set the 'R' bit before reading them, they basically stop counting.
+ * 	 					--MAG
+ */
+
+/*
+ * 'todc_info' should be initialized in your *_setup.c file to
+ * point to a fully initialized 'todc_info_t' structure.
+ * This structure holds all the register offsets for your particular
+ * TODC/RTC chip.
+ * TODC_ALLOC()/TODC_INIT() will allocate and initialize this table for you.
+ */
+
+#ifdef	RTC_FREQ_SELECT
+#undef	RTC_FREQ_SELECT
+#define	RTC_FREQ_SELECT		control_b	/* Register A */
+#endif
+
+#ifdef	RTC_CONTROL
+#undef	RTC_CONTROL
+#define	RTC_CONTROL		control_a	/* Register B */
+#endif
+
+#ifdef	RTC_INTR_FLAGS
+#undef	RTC_INTR_FLAGS
+#define	RTC_INTR_FLAGS		watchdog	/* Register C */
+#endif
+
+#ifdef	RTC_VALID
+#undef	RTC_VALID
+#define	RTC_VALID		interrupts	/* Register D */
+#endif
+
+/* Access routines when RTC accessed directly (like normal memory) */
+u_char
+todc_direct_read_val(int addr)
+{
+	return readb((void __iomem *)(todc_info->nvram_data + addr));
+}
+
+void
+todc_direct_write_val(int addr, unsigned char val)
+{
+	writeb(val, (void __iomem *)(todc_info->nvram_data + addr));
+	return;
+}
+
+/* Access routines for accessing m48txx type chips via addr/data regs */
+u_char
+todc_m48txx_read_val(int addr)
+{
+	outb(addr, todc_info->nvram_as0);
+	outb(addr>>todc_info->as0_bits, todc_info->nvram_as1);
+	return inb(todc_info->nvram_data);
+}
+
+void
+todc_m48txx_write_val(int addr, unsigned char val)
+{
+	outb(addr, todc_info->nvram_as0);
+	outb(addr>>todc_info->as0_bits, todc_info->nvram_as1);
+   	outb(val, todc_info->nvram_data);
+	return;
+}
+
+/* Access routines for accessing mc146818 type chips via addr/data regs */
+u_char
+todc_mc146818_read_val(int addr)
+{
+	outb_p(addr, todc_info->nvram_as0);
+	return inb_p(todc_info->nvram_data);
+}
+
+void
+todc_mc146818_write_val(int addr, unsigned char val)
+{
+	outb_p(addr, todc_info->nvram_as0);
+   	outb_p(val, todc_info->nvram_data);
+}
+
+
+/*
+ * Routines to make RTC chips with NVRAM buried behind an addr/data pair
+ * have the NVRAM and clock regs appear at the same level.
+ * The NVRAM will appear to start at addr 0 and the clock regs will appear
+ * to start immediately after the NVRAM (actually, start at offset
+ * todc_info->nvram_size).
+ */
+static inline u_char
+todc_read_val(int addr)
+{
+	u_char	val;
+
+	if (todc_info->sw_flags & TODC_FLAG_2_LEVEL_NVRAM) {
+		if (addr < todc_info->nvram_size) { /* NVRAM */
+			ppc_md.rtc_write_val(todc_info->nvram_addr_reg, addr);
+			val = ppc_md.rtc_read_val(todc_info->nvram_data_reg);
+		}
+		else { /* Clock Reg */
+			addr -= todc_info->nvram_size;
+			val = ppc_md.rtc_read_val(addr);
+		}
+	}
+	else {
+		val = ppc_md.rtc_read_val(addr);
+	}
+
+	return val;
+}
+
+static inline void
+todc_write_val(int addr, u_char val)
+{
+	if (todc_info->sw_flags & TODC_FLAG_2_LEVEL_NVRAM) {
+		if (addr < todc_info->nvram_size) { /* NVRAM */
+			ppc_md.rtc_write_val(todc_info->nvram_addr_reg, addr);
+			ppc_md.rtc_write_val(todc_info->nvram_data_reg, val);
+		}
+		else { /* Clock Reg */
+			addr -= todc_info->nvram_size;
+			ppc_md.rtc_write_val(addr, val);
+		}
+	}
+	else {
+		ppc_md.rtc_write_val(addr, val);
+	}
+}
+
+/*
+ * TODC routines
+ *
+ * There is some ugly stuff in that there are assumptions for the mc146818.
+ *
+ * Assumptions:
+ *	- todc_info->control_a has the offset as mc146818 Register B reg
+ *	- todc_info->control_b has the offset as mc146818 Register A reg
+ *	- m48txx control reg's write enable or 'W' bit is same as
+ *	  mc146818 Register B 'SET' bit (i.e., 0x80)
+ *
+ * These assumptions were made to make the code simpler.
+ */
+long __init
+todc_time_init(void)
+{
+	u_char	cntl_b;
+
+	if (!ppc_md.rtc_read_val)
+		ppc_md.rtc_read_val = ppc_md.nvram_read_val;
+	if (!ppc_md.rtc_write_val)
+		ppc_md.rtc_write_val = ppc_md.nvram_write_val;
+	
+	cntl_b = todc_read_val(todc_info->control_b);
+
+	if (todc_info->rtc_type == TODC_TYPE_MC146818) {
+		if ((cntl_b & 0x70) != 0x20) {
+			printk(KERN_INFO "TODC %s %s\n",
+				"real-time-clock was stopped.",
+				"Now starting...");
+			cntl_b &= ~0x70;
+			cntl_b |= 0x20;
+		}
+
+		todc_write_val(todc_info->control_b, cntl_b);
+	} else if (todc_info->rtc_type == TODC_TYPE_DS17285) {
+		u_char mode;
+
+		mode = todc_read_val(TODC_TYPE_DS17285_CNTL_A);
+		/* Make sure countdown clear is not set */
+		mode &= ~0x40;
+		/* Enable oscillator, extended register set */
+		mode |= 0x30;
+		todc_write_val(TODC_TYPE_DS17285_CNTL_A, mode);
+
+	} else if (todc_info->rtc_type == TODC_TYPE_DS1501) {
+		u_char	month;
+
+		todc_info->enable_read = TODC_DS1501_CNTL_B_TE;
+		todc_info->enable_write = TODC_DS1501_CNTL_B_TE;
+
+		month = todc_read_val(todc_info->month);
+
+		if ((month & 0x80) == 0x80) {
+			printk(KERN_INFO "TODC %s %s\n",
+				"real-time-clock was stopped.",
+				"Now starting...");
+			month &= ~0x80;
+			todc_write_val(todc_info->month, month);
+		}
+
+		cntl_b &= ~TODC_DS1501_CNTL_B_TE;
+		todc_write_val(todc_info->control_b, cntl_b);
+	} else { /* must be a m48txx type */
+		u_char	cntl_a;
+
+		todc_info->enable_read = TODC_MK48TXX_CNTL_A_R;
+		todc_info->enable_write = TODC_MK48TXX_CNTL_A_W;
+
+		cntl_a = todc_read_val(todc_info->control_a);
+
+		/* Check & clear STOP bit in control B register */
+		if (cntl_b & TODC_MK48TXX_DAY_CB) {
+			printk(KERN_INFO "TODC %s %s\n",
+				"real-time-clock was stopped.",
+				"Now starting...");
+
+			cntl_a |= todc_info->enable_write;
+			cntl_b &= ~TODC_MK48TXX_DAY_CB;/* Start Oscil */
+
+			todc_write_val(todc_info->control_a, cntl_a);
+			todc_write_val(todc_info->control_b, cntl_b);
+		}
+
+		/* Make sure READ & WRITE bits are cleared. */
+		cntl_a &= ~(todc_info->enable_write |
+			    todc_info->enable_read);
+		todc_write_val(todc_info->control_a, cntl_a);
+	}
+
+	return 0;
+}
+
+/*
+ * There is some ugly stuff in that there are assumptions that for a mc146818,
+ * the todc_info->control_a has the offset of the mc146818 Register B reg and
+ * that the register'ss 'SET' bit is the same as the m48txx's write enable
+ * bit in the control register of the m48txx (i.e., 0x80).
+ *
+ * It was done to make the code look simpler.
+ */
+ulong
+todc_get_rtc_time(void)
+{
+	uint	year = 0, mon = 0, day = 0, hour = 0, min = 0, sec = 0;
+	uint	limit, i;
+	u_char	save_control, uip = 0;
+
+	spin_lock(&rtc_lock);
+	save_control = todc_read_val(todc_info->control_a);
+
+	if (todc_info->rtc_type != TODC_TYPE_MC146818) {
+		limit = 1;
+
+		switch (todc_info->rtc_type) {
+			case TODC_TYPE_DS1553:
+			case TODC_TYPE_DS1557:
+			case TODC_TYPE_DS1743:
+			case TODC_TYPE_DS1746:	/* XXXX BAD HACK -> FIX */
+			case TODC_TYPE_DS1747:
+			case TODC_TYPE_DS17285:
+				break;
+			default:
+				todc_write_val(todc_info->control_a,
+				       (save_control | todc_info->enable_read));
+		}
+	}
+	else {
+		limit = 100000000;
+	}
+
+	for (i=0; i<limit; i++) {
+		if (todc_info->rtc_type == TODC_TYPE_MC146818) {
+			uip = todc_read_val(todc_info->RTC_FREQ_SELECT);
+		}
+
+		sec = todc_read_val(todc_info->seconds) & 0x7f;
+		min = todc_read_val(todc_info->minutes) & 0x7f;
+		hour = todc_read_val(todc_info->hours) & 0x3f;
+		day = todc_read_val(todc_info->day_of_month) & 0x3f;
+		mon = todc_read_val(todc_info->month) & 0x1f;
+		year = todc_read_val(todc_info->year) & 0xff;
+
+		if (todc_info->rtc_type == TODC_TYPE_MC146818) {
+			uip |= todc_read_val(todc_info->RTC_FREQ_SELECT);
+			if ((uip & RTC_UIP) == 0) break;
+		}
+	}
+
+	if (todc_info->rtc_type != TODC_TYPE_MC146818) {
+		switch (todc_info->rtc_type) {
+			case TODC_TYPE_DS1553:
+			case TODC_TYPE_DS1557:
+			case TODC_TYPE_DS1743:
+			case TODC_TYPE_DS1746:	/* XXXX BAD HACK -> FIX */
+			case TODC_TYPE_DS1747:
+			case TODC_TYPE_DS17285:
+				break;
+			default:
+				save_control &= ~(todc_info->enable_read);
+				todc_write_val(todc_info->control_a,
+						       save_control);
+		}
+	}
+	spin_unlock(&rtc_lock);
+
+	if ((todc_info->rtc_type != TODC_TYPE_MC146818) ||
+	    ((save_control & RTC_DM_BINARY) == 0) ||
+	    RTC_ALWAYS_BCD) {
+
+		BCD_TO_BIN(sec);
+		BCD_TO_BIN(min);
+		BCD_TO_BIN(hour);
+		BCD_TO_BIN(day);
+		BCD_TO_BIN(mon);
+		BCD_TO_BIN(year);
+	}
+
+	year = year + 1900;
+	if (year < 1970) {
+		year += 100;
+	}
+
+	return mktime(year, mon, day, hour, min, sec);
+}
+
+int
+todc_set_rtc_time(unsigned long nowtime)
+{
+	struct rtc_time	tm;
+	u_char		save_control, save_freq_select = 0;
+
+	spin_lock(&rtc_lock);
+	to_tm(nowtime, &tm);
+
+	save_control = todc_read_val(todc_info->control_a);
+
+	/* Assuming MK48T59_RTC_CA_WRITE & RTC_SET are equal */
+	todc_write_val(todc_info->control_a,
+			       (save_control | todc_info->enable_write));
+	save_control &= ~(todc_info->enable_write); /* in case it was set */
+
+	if (todc_info->rtc_type == TODC_TYPE_MC146818) {
+		save_freq_select = todc_read_val(todc_info->RTC_FREQ_SELECT);
+		todc_write_val(todc_info->RTC_FREQ_SELECT,
+				       save_freq_select | RTC_DIV_RESET2);
+	}
+
+
+        tm.tm_year = (tm.tm_year - 1900) % 100;
+
+	if ((todc_info->rtc_type != TODC_TYPE_MC146818) ||
+	    ((save_control & RTC_DM_BINARY) == 0) ||
+	    RTC_ALWAYS_BCD) {
+
+		BIN_TO_BCD(tm.tm_sec);
+		BIN_TO_BCD(tm.tm_min);
+		BIN_TO_BCD(tm.tm_hour);
+		BIN_TO_BCD(tm.tm_mon);
+		BIN_TO_BCD(tm.tm_mday);
+		BIN_TO_BCD(tm.tm_year);
+	}
+
+	todc_write_val(todc_info->seconds,      tm.tm_sec);
+	todc_write_val(todc_info->minutes,      tm.tm_min);
+	todc_write_val(todc_info->hours,        tm.tm_hour);
+	todc_write_val(todc_info->month,        tm.tm_mon);
+	todc_write_val(todc_info->day_of_month, tm.tm_mday);
+	todc_write_val(todc_info->year,         tm.tm_year);
+
+	todc_write_val(todc_info->control_a, save_control);
+
+	if (todc_info->rtc_type == TODC_TYPE_MC146818) {
+		todc_write_val(todc_info->RTC_FREQ_SELECT, save_freq_select);
+	}
+	spin_unlock(&rtc_lock);
+
+	return 0;
+}
+
+/*
+ * Manipulates read bit to reliably read seconds at a high rate.
+ */
+static unsigned char __init todc_read_timereg(int addr)
+{
+	unsigned char save_control = 0, val;
+
+	switch (todc_info->rtc_type) {
+		case TODC_TYPE_DS1553:
+		case TODC_TYPE_DS1557:
+		case TODC_TYPE_DS1746:	/* XXXX BAD HACK -> FIX */
+		case TODC_TYPE_DS1747:
+		case TODC_TYPE_DS17285:
+		case TODC_TYPE_MC146818:
+			break;
+		default:
+			save_control = todc_read_val(todc_info->control_a);
+			todc_write_val(todc_info->control_a,
+				       (save_control | todc_info->enable_read));
+	}
+	val = todc_read_val(addr);
+
+	switch (todc_info->rtc_type) {
+		case TODC_TYPE_DS1553:
+		case TODC_TYPE_DS1557:
+		case TODC_TYPE_DS1746:	/* XXXX BAD HACK -> FIX */
+		case TODC_TYPE_DS1747:
+		case TODC_TYPE_DS17285:
+		case TODC_TYPE_MC146818:
+			break;
+		default:
+			save_control &= ~(todc_info->enable_read);
+			todc_write_val(todc_info->control_a, save_control);
+	}
+
+	return val;
+}
+
+/*
+ * This was taken from prep_setup.c
+ * Use the NVRAM RTC to time a second to calibrate the decrementer.
+ */
+void __init
+todc_calibrate_decr(void)
+{
+	ulong	freq;
+	ulong	tbl, tbu;
+        long	i, loop_count;
+        u_char	sec;
+
+	todc_time_init();
+
+	/*
+	 * Actually this is bad for precision, we should have a loop in
+	 * which we only read the seconds counter. todc_read_val writes
+	 * the address bytes on every call and this takes a lot of time.
+	 * Perhaps an nvram_wait_change method returning a time
+	 * stamp with a loop count as parameter would be the solution.
+	 */
+	/*
+	 * Need to make sure the tbl doesn't roll over so if tbu increments
+	 * during this test, we need to do it again.
+	 */
+	loop_count = 0;
+
+	sec = todc_read_timereg(todc_info->seconds) & 0x7f;
+
+	do {
+		tbu = get_tbu();
+
+		for (i = 0 ; i < 10000000 ; i++) {/* may take up to 1 second */
+		   tbl = get_tbl();
+
+		   if ((todc_read_timereg(todc_info->seconds) & 0x7f) != sec) {
+		      break;
+		   }
+		}
+
+		sec = todc_read_timereg(todc_info->seconds) & 0x7f;
+
+		for (i = 0 ; i < 10000000 ; i++) { /* Should take 1 second */
+		   freq = get_tbl();
+
+		   if ((todc_read_timereg(todc_info->seconds) & 0x7f) != sec) {
+		      break;
+		   }
+		}
+
+		freq -= tbl;
+	} while ((get_tbu() != tbu) && (++loop_count < 2));
+
+	printk("time_init: decrementer frequency = %lu.%.6lu MHz\n",
+	       freq/1000000, freq%1000000);
+
+	tb_ticks_per_jiffy = freq / HZ;
+	tb_to_us = mulhwu_scale_factor(freq, 1000000);
+
+	return;
+}
diff --git a/arch/ppc/syslib/xilinx_pic.c b/arch/ppc/syslib/xilinx_pic.c
new file mode 100644
index 000000000000..e0bd66f0847a
--- /dev/null
+++ b/arch/ppc/syslib/xilinx_pic.c
@@ -0,0 +1,157 @@
+/*
+ * arch/ppc/syslib/xilinx_pic.c
+ *
+ * Interrupt controller driver for Xilinx Virtex-II Pro.
+ *
+ * Author: MontaVista Software, Inc.
+ *         source@mvista.com
+ *
+ * 2002-2004 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <asm/io.h>
+#include <asm/xparameters.h>
+#include <asm/ibm4xx.h>
+
+/* No one else should require these constants, so define them locally here. */
+#define ISR 0			/* Interrupt Status Register */
+#define IPR 1			/* Interrupt Pending Register */
+#define IER 2			/* Interrupt Enable Register */
+#define IAR 3			/* Interrupt Acknowledge Register */
+#define SIE 4			/* Set Interrupt Enable bits */
+#define CIE 5			/* Clear Interrupt Enable bits */
+#define IVR 6			/* Interrupt Vector Register */
+#define MER 7			/* Master Enable Register */
+
+#if XPAR_XINTC_USE_DCR == 0
+static volatile u32 *intc;
+#define intc_out_be32(addr, mask)     out_be32((addr), (mask))
+#define intc_in_be32(addr)            in_be32((addr))
+#else
+#define intc    XPAR_INTC_0_BASEADDR
+#define intc_out_be32(addr, mask)     mtdcr((addr), (mask))
+#define intc_in_be32(addr)            mfdcr((addr))
+#endif
+
+static void
+xilinx_intc_enable(unsigned int irq)
+{
+	unsigned long mask = (0x00000001 << (irq & 31));
+	pr_debug("enable: %d\n", irq);
+	intc_out_be32(intc + SIE, mask);
+}
+
+static void
+xilinx_intc_disable(unsigned int irq)
+{
+	unsigned long mask = (0x00000001 << (irq & 31));
+	pr_debug("disable: %d\n", irq);
+	intc_out_be32(intc + CIE, mask);
+}
+
+static void
+xilinx_intc_disable_and_ack(unsigned int irq)
+{
+	unsigned long mask = (0x00000001 << (irq & 31));
+	pr_debug("disable_and_ack: %d\n", irq);
+	intc_out_be32(intc + CIE, mask);
+	if (!(irq_desc[irq].status & IRQ_LEVEL))
+		intc_out_be32(intc + IAR, mask);	/* ack edge triggered intr */
+}
+
+static void
+xilinx_intc_end(unsigned int irq)
+{
+	unsigned long mask = (0x00000001 << (irq & 31));
+
+	pr_debug("end: %d\n", irq);
+	if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) {
+		intc_out_be32(intc + SIE, mask);
+		/* ack level sensitive intr */
+		if (irq_desc[irq].status & IRQ_LEVEL)
+			intc_out_be32(intc + IAR, mask);
+	}
+}
+
+static struct hw_interrupt_type xilinx_intc = {
+	"Xilinx Interrupt Controller",
+	NULL,
+	NULL,
+	xilinx_intc_enable,
+	xilinx_intc_disable,
+	xilinx_intc_disable_and_ack,
+	xilinx_intc_end,
+	0
+};
+
+int
+xilinx_pic_get_irq(struct pt_regs *regs)
+{
+	int irq;
+
+	/*
+	 * NOTE: This function is the one that needs to be improved in
+	 * order to handle multiple interrupt controllers.  It currently
+	 * is hardcoded to check for interrupts only on the first INTC.
+	 */
+
+	irq = intc_in_be32(intc + IVR);
+	if (irq != -1)
+		irq = irq;
+
+	pr_debug("get_irq: %d\n", irq);
+
+	return (irq);
+}
+
+void __init
+ppc4xx_pic_init(void)
+{
+	int i;
+
+	/*
+	 * NOTE: The assumption here is that NR_IRQS is 32 or less
+	 * (NR_IRQS is 32 for PowerPC 405 cores by default).
+	 */
+#if (NR_IRQS > 32)
+#error NR_IRQS > 32 not supported
+#endif
+
+#if XPAR_XINTC_USE_DCR == 0
+	intc = ioremap(XPAR_INTC_0_BASEADDR, 32);
+
+	printk(KERN_INFO "Xilinx INTC #0 at 0x%08lX mapped to 0x%08lX\n",
+	       (unsigned long) XPAR_INTC_0_BASEADDR, (unsigned long) intc);
+#else
+	printk(KERN_INFO "Xilinx INTC #0 at 0x%08lX (DCR)\n",
+	       (unsigned long) XPAR_INTC_0_BASEADDR);
+#endif
+
+	/*
+	 * Disable all external interrupts until they are
+	 * explicity requested.
+	 */
+	intc_out_be32(intc + IER, 0);
+
+	/* Acknowledge any pending interrupts just in case. */
+	intc_out_be32(intc + IAR, ~(u32) 0);
+
+	/* Turn on the Master Enable. */
+	intc_out_be32(intc + MER, 0x3UL);
+
+	ppc_md.get_irq = xilinx_pic_get_irq;
+
+	for (i = 0; i < NR_IRQS; ++i) {
+		irq_desc[i].handler = &xilinx_intc;
+
+		if (XPAR_INTC_0_KIND_OF_INTR & (0x00000001 << i))
+			irq_desc[i].status &= ~IRQ_LEVEL;
+		else
+			irq_desc[i].status |= IRQ_LEVEL;
+	}
+}