Merge tag 'tty-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty/serial driver updates from Greg KH:
 "Here is the big tty/serial driver patchset for 4.11-rc1.

  Not much here, but a lot of little fixes and individual serial driver
  updates all over the subsystem. Majority are for the sh-sci driver and
  platform (the arch-specific changes have acks from the maintainer).

  The start of the "serial bus" code is here as well, but nothing is
  converted to use it yet. That work is still ongoing, hopefully will
  start to show up across different subsystems for 4.12 (bluetooth is
  one major place that will be used.)

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'tty-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (109 commits)
  tty: pl011: Work around QDF2400 E44 stuck BUSY bit
  atmel_serial: Use the fractional divider when possible
  tty: Remove extra include in HVC console tty framework
  serial: exar: Enable MSI support
  serial: exar: Move register defines from uapi header to consumer site
  serial: pci: Remove unused pci_boards entries
  serial: exar: Move Commtech adapters to 8250_exar as well
  serial: exar: Fix feature control register constants
  serial: exar: Fix initialization of EXAR registers for ports > 0
  serial: exar: Fix mapping of port I/O resources
  serial: sh-sci: fix hardware RX trigger level setting
  tty/serial: atmel: ensure state is restored after suspending
  serial: 8250_dw: Avoid "too much work" from bogus rx timeout interrupt
  serdev: ttyport: check whether tty_init_dev() fails
  serial: 8250_pci: make pciserial_detach_ports() static
  ARM: dts: STiH410-b2260: Enable HW flow-control
  ARM: dts: STiH407-family: Use new Pinctrl groups
  ARM: dts: STiH407-pinctrl: Add Pinctrl group for HW flow-control
  ARM: dts: STiH410-b2260: Identify the UART RTS line
  dt-bindings: serial: Update 'uart-has-rtscts' description
  ...

1 files changed, 11 insertions, 10 deletions

diff --git a/arch/sh/kernel/cpu/sh4/setup-sh7760.c b/arch/sh/kernel/cpu/sh4/setup-sh7760.c
index 973b736b3b98..e51fe1734e13 100644
--- a/arch/sh/kernel/cpu/sh4/setup-sh7760.c
+++ b/arch/sh/kernel/cpu/sh4/setup-sh7760.c
@@ -128,8 +128,7 @@ static DECLARE_INTC_DESC(intc_desc_irq, "sh7760-irq", vectors_irq, groups,
 			 mask_registers, prio_registers, NULL);
 
 static struct plat_sci_port scif0_platform_data = {
-	.flags		= UPF_BOOT_AUTOCONF,
-	.scscr		= SCSCR_RE | SCSCR_TE | SCSCR_REIE,
+	.scscr		= SCSCR_REIE,
 	.type		= PORT_SCIF,
 	.regtype	= SCIx_SH4_SCIF_FIFODATA_REGTYPE,
 };
@@ -153,9 +152,8 @@ static struct platform_device scif0_device = {
 };
 
 static struct plat_sci_port scif1_platform_data = {
-	.flags		= UPF_BOOT_AUTOCONF,
 	.type		= PORT_SCIF,
-	.scscr		= SCSCR_RE | SCSCR_TE | SCSCR_REIE,
+	.scscr		= SCSCR_REIE,
 	.regtype	= SCIx_SH4_SCIF_FIFODATA_REGTYPE,
 };
 
@@ -178,8 +176,7 @@ static struct platform_device scif1_device = {
 };
 
 static struct plat_sci_port scif2_platform_data = {
-	.flags		= UPF_BOOT_AUTOCONF,
-	.scscr		= SCSCR_RE | SCSCR_TE | SCSCR_REIE,
+	.scscr		= SCSCR_REIE,
 	.type		= PORT_SCIF,
 	.regtype	= SCIx_SH4_SCIF_FIFODATA_REGTYPE,
 };
@@ -203,14 +200,18 @@ static struct platform_device scif2_device = {
 };
 
 static struct plat_sci_port scif3_platform_data = {
-	.flags		= UPF_BOOT_AUTOCONF,
-	.scscr		= SCSCR_RE | SCSCR_TE | SCSCR_REIE,
+	/*
+	 * This is actually a SIM card module serial port, based on an SCI with
+	 * additional registers. The sh-sci driver doesn't support the SIM port
+	 * type, declare it as a SCI. Don't declare the additional registers in
+	 * the memory resource or the driver will compute an incorrect regshift
+	 * value.
+	 */
 	.type		= PORT_SCI,
-	.regshift	= 2,
 };
 
 static struct resource scif3_resources[] = {
-	DEFINE_RES_MEM(0xfe480000, 0x100),
+	DEFINE_RES_MEM(0xfe480000, 0x10),
 	DEFINE_RES_IRQ(evt2irq(0xc00)),
 	DEFINE_RES_IRQ(evt2irq(0xc20)),
 	DEFINE_RES_IRQ(evt2irq(0xc40)),