tile: support multiple mPIPE shims in tilegx network driver

The initial driver support was for a single mPIPE shim on the chip
(as is the case for the Gx36 hardware).  The Gx72 chip has two mPIPE
shims, so we extend the driver to handle that case.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

3 files changed, 35 insertions, 0 deletions

diff --git a/arch/tile/include/gxio/iorpc_mpipe_info.h b/arch/tile/include/gxio/iorpc_mpipe_info.h
index 0bcf3f71ce8b..476c5e5ca22c 100644
--- a/arch/tile/include/gxio/iorpc_mpipe_info.h
+++ b/arch/tile/include/gxio/iorpc_mpipe_info.h
@@ -27,11 +27,15 @@
 #include <asm/pgtable.h>
 
 
+#define GXIO_MPIPE_INFO_OP_INSTANCE_AUX IORPC_OPCODE(IORPC_FORMAT_NONE, 0x1250)
 #define GXIO_MPIPE_INFO_OP_ENUMERATE_AUX IORPC_OPCODE(IORPC_FORMAT_NONE, 0x1251)
 #define GXIO_MPIPE_INFO_OP_GET_MMIO_BASE IORPC_OPCODE(IORPC_FORMAT_NONE_NOUSER, 0x8000)
 #define GXIO_MPIPE_INFO_OP_CHECK_MMIO_OFFSET IORPC_OPCODE(IORPC_FORMAT_NONE_NOUSER, 0x8001)
 
 
+int gxio_mpipe_info_instance_aux(gxio_mpipe_info_context_t * context,
+				 _gxio_mpipe_link_name_t name);
+
 int gxio_mpipe_info_enumerate_aux(gxio_mpipe_info_context_t * context,
 				  unsigned int idx,
 				  _gxio_mpipe_link_name_t * name,
diff --git a/arch/tile/include/gxio/mpipe.h b/arch/tile/include/gxio/mpipe.h
index ed742e3f9562..eb7fee41c9b6 100644
--- a/arch/tile/include/gxio/mpipe.h
+++ b/arch/tile/include/gxio/mpipe.h
@@ -220,6 +220,13 @@ typedef MPIPE_PDESC_t gxio_mpipe_idesc_t;
  */
 typedef MPIPE_EDMA_DESC_t gxio_mpipe_edesc_t;
 
+/*
+ * Max # of mpipe instances. 2 currently.
+ */
+#define GXIO_MPIPE_INSTANCE_MAX  HV_MPIPE_INSTANCE_MAX
+
+#define NR_MPIPE_MAX   GXIO_MPIPE_INSTANCE_MAX
+
 /* Get the "va" field from an "idesc".
  *
  * This is the address at which the ingress hardware copied the first
@@ -311,6 +318,9 @@ typedef struct {
 	/* File descriptor for calling up to Linux (and thus the HV). */
 	int fd;
 
+	/* Corresponding mpipe instance #. */
+	int instance;
+
 	/* The VA at which configuration registers are mapped. */
 	char *mmio_cfg_base;
 
@@ -1716,6 +1726,24 @@ typedef struct {
 	uint8_t mac;
 } gxio_mpipe_link_t;
 
+/* Translate a link name to the instance number of the mPIPE shim which is
+ *  connected to that link.  This call does not verify whether the link is
+ *  currently available, and does not reserve any link resources;
+ *  gxio_mpipe_link_open() must be called to perform those functions.
+ *
+ *  Typically applications will call this function to translate a link name
+ *  to an mPIPE instance number; call gxio_mpipe_init(), passing it that
+ *  instance number, to initialize the mPIPE shim; and then call
+ *  gxio_mpipe_link_open(), passing it the same link name plus the mPIPE
+ *  context, to configure the link.
+ *
+ * @param link_name Name of the link; see @ref gxio_mpipe_link_names.
+ * @return The mPIPE instance number which is associated with the named
+ *  link, or a negative error code (::GXIO_ERR_NO_DEVICE) if the link does
+ *  not exist.
+ */
+extern int gxio_mpipe_link_instance(const char *link_name);
+
 /* Retrieve one of this system's legal link names, and its MAC address.
  *
  * @param index Link name index.  If a system supports N legal link names,
diff --git a/arch/tile/include/hv/drv_mpipe_intf.h b/arch/tile/include/hv/drv_mpipe_intf.h
index 6cdae3bf046e..c97e416dd963 100644
--- a/arch/tile/include/hv/drv_mpipe_intf.h
+++ b/arch/tile/include/hv/drv_mpipe_intf.h
@@ -23,6 +23,9 @@
 #include <arch/mpipe_constants.h>
 
 
+/** Number of mPIPE instances supported */
+#define HV_MPIPE_INSTANCE_MAX   (2)
+
 /** Number of buffer stacks (32). */
 #define HV_MPIPE_NUM_BUFFER_STACKS \
   (MPIPE_MMIO_INIT_DAT_GX36_1__BUFFER_STACK_MASK_WIDTH)