aboutsummaryrefslogtreecommitdiffstats
path: root/arch/tile
diff options
context:
space:
mode:
authorChris Metcalf <cmetcalf@tilera.com>2013-08-06 14:11:21 -0400
committerChris Metcalf <cmetcalf@tilera.com>2013-08-12 14:46:18 -0400
commitbda0f5bad812df076a28fa5e58d86dfe68415251 (patch)
tree221517adf66b504282e484d9d2faaee4efe3602d /arch/tile
parenttile PCI RC: remove stale include of linux/numa.h (diff)
downloadlinux-dev-bda0f5bad812df076a28fa5e58d86dfe68415251.tar.xz
linux-dev-bda0f5bad812df076a28fa5e58d86dfe68415251.zip
tile: various console improvements
This change improves and cleans up the tile console. - We enable HVC_IRQ support on tilegx, with the addition of a new Tilera hypervisor API for tilegx to allow a console IPI. If IPI support is not available we fall back to the previous polling mode. - We simplify the earlyprintk code to use CON_BOOT and eliminate some of the other supporting earlyprintk code. - A new tile_console_write() primitive is used to send output to the console and is factored out of the hvc_tile driver. This lets us support a "sim_console" boot argument to allow using simulator hooks to send output to the "console" as a slightly faster alternative to emulating the hardware more directly. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'arch/tile')
-rw-r--r--arch/tile/Kconfig1
-rw-r--r--arch/tile/include/asm/setup.h3
-rw-r--r--arch/tile/include/hv/hypervisor.h29
-rw-r--r--arch/tile/kernel/early_printk.c47
-rw-r--r--arch/tile/kernel/hvglue.lds3
-rw-r--r--arch/tile/kernel/reboot.c2
6 files changed, 43 insertions, 42 deletions
diff --git a/arch/tile/Kconfig b/arch/tile/Kconfig
index e41a3818b240..0576e1d8c4f9 100644
--- a/arch/tile/Kconfig
+++ b/arch/tile/Kconfig
@@ -112,6 +112,7 @@ config SMP
config HVC_TILE
depends on TTY
select HVC_DRIVER
+ select HVC_IRQ if TILEGX
def_bool y
config TILEGX
diff --git a/arch/tile/include/asm/setup.h b/arch/tile/include/asm/setup.h
index d048888c5d9a..e98909033e5b 100644
--- a/arch/tile/include/asm/setup.h
+++ b/arch/tile/include/asm/setup.h
@@ -24,9 +24,8 @@
*/
#define MAXMEM_PFN PFN_DOWN(MAXMEM)
+int tile_console_write(const char *buf, int count);
void early_panic(const char *fmt, ...);
-void warn_early_printk(void);
-void __init disable_early_printk(void);
/* Init-time routine to do tile-specific per-cpu setup. */
void setup_cpu(int boot);
diff --git a/arch/tile/include/hv/hypervisor.h b/arch/tile/include/hv/hypervisor.h
index 837dca5328c2..f882ebcf43a9 100644
--- a/arch/tile/include/hv/hypervisor.h
+++ b/arch/tile/include/hv/hypervisor.h
@@ -318,8 +318,11 @@
/** hv_set_pte_super_shift */
#define HV_DISPATCH_SET_PTE_SUPER_SHIFT 57
+/** hv_console_set_ipi */
+#define HV_DISPATCH_CONSOLE_SET_IPI 63
+
/** One more than the largest dispatch value */
-#define _HV_DISPATCH_END 58
+#define _HV_DISPATCH_END 64
#ifndef __ASSEMBLER__
@@ -585,6 +588,30 @@ typedef struct
*/
int hv_get_ipi_pte(HV_Coord tile, int pl, HV_PTE* pte);
+/** Configure the console interrupt.
+ *
+ * When the console client interrupt is enabled, the hypervisor will
+ * deliver the specified IPI to the client in the following situations:
+ *
+ * - The console has at least one character available for input.
+ *
+ * - The console can accept new characters for output, and the last call
+ * to hv_console_write() did not write all of the characters requested
+ * by the client.
+ *
+ * Note that in some system configurations, console interrupt will not
+ * be available; clients should be prepared for this routine to fail and
+ * to fall back to periodic console polling in that case.
+ *
+ * @param ipi Index of the IPI register which will receive the interrupt.
+ * @param event IPI event number for console interrupt. If less than 0,
+ * disable the console IPI interrupt.
+ * @param coord Tile to be targeted for console interrupt.
+ * @return 0 on success, otherwise, HV_EINVAL if illegal parameter,
+ * HV_ENOTSUP if console interrupt are not available.
+ */
+int hv_console_set_ipi(int ipi, int event, HV_Coord coord);
+
#else /* !CHIP_HAS_IPI() */
/** A set of interrupts. */
diff --git a/arch/tile/kernel/early_printk.c b/arch/tile/kernel/early_printk.c
index 34d72a151bf3..b608e00e7f6d 100644
--- a/arch/tile/kernel/early_printk.c
+++ b/arch/tile/kernel/early_printk.c
@@ -23,19 +23,24 @@
static void early_hv_write(struct console *con, const char *s, unsigned n)
{
- hv_console_write((HV_VirtAddr) s, n);
+ tile_console_write(s, n);
+
+ /*
+ * Convert NL to NLCR (close enough to CRNL) during early boot.
+ * We assume newlines are at the ends of strings, which turns out
+ * to be good enough for early boot console output.
+ */
+ if (n && s[n-1] == '\n')
+ tile_console_write("\r", 1);
}
static struct console early_hv_console = {
.name = "earlyhv",
.write = early_hv_write,
- .flags = CON_PRINTBUFFER,
+ .flags = CON_PRINTBUFFER | CON_BOOT,
.index = -1,
};
-/* Direct interface for emergencies */
-static int early_console_complete;
-
void early_panic(const char *fmt, ...)
{
va_list ap;
@@ -43,51 +48,21 @@ void early_panic(const char *fmt, ...)
va_start(ap, fmt);
early_printk("Kernel panic - not syncing: ");
early_vprintk(fmt, ap);
- early_console->write(early_console, "\n", 1);
+ early_printk("\n");
va_end(ap);
dump_stack();
hv_halt();
}
-static int __initdata keep_early;
-
static int __init setup_early_printk(char *str)
{
if (early_console)
return 1;
- if (str != NULL && strncmp(str, "keep", 4) == 0)
- keep_early = 1;
-
early_console = &early_hv_console;
register_console(early_console);
return 0;
}
-void __init disable_early_printk(void)
-{
- early_console_complete = 1;
- if (!early_console)
- return;
- if (!keep_early) {
- early_printk("disabling early console\n");
- unregister_console(early_console);
- early_console = NULL;
- } else {
- early_printk("keeping early console\n");
- }
-}
-
-void warn_early_printk(void)
-{
- if (early_console_complete || early_console)
- return;
- early_printk("\
-Machine shutting down before console output is fully initialized.\n\
-You may wish to reboot and add the option 'earlyprintk' to your\n\
-boot command line to see any diagnostic early console output.\n\
-");
-}
-
early_param("earlyprintk", setup_early_printk);
diff --git a/arch/tile/kernel/hvglue.lds b/arch/tile/kernel/hvglue.lds
index d44c5a67a1ed..ef522900633a 100644
--- a/arch/tile/kernel/hvglue.lds
+++ b/arch/tile/kernel/hvglue.lds
@@ -56,4 +56,5 @@ hv_inquire_realpa = TEXT_OFFSET + 0x106c0;
hv_flush_all = TEXT_OFFSET + 0x106e0;
hv_get_ipi_pte = TEXT_OFFSET + 0x10700;
hv_set_pte_super_shift = TEXT_OFFSET + 0x10720;
-hv_glue_internals = TEXT_OFFSET + 0x10740;
+hv_console_set_ipi = TEXT_OFFSET + 0x107e0;
+hv_glue_internals = TEXT_OFFSET + 0x10800;
diff --git a/arch/tile/kernel/reboot.c b/arch/tile/kernel/reboot.c
index d1b5c913ae72..6c5d2c070a12 100644
--- a/arch/tile/kernel/reboot.c
+++ b/arch/tile/kernel/reboot.c
@@ -27,7 +27,6 @@
void machine_halt(void)
{
- warn_early_printk();
arch_local_irq_disable_all();
smp_send_stop();
hv_halt();
@@ -35,7 +34,6 @@ void machine_halt(void)
void machine_power_off(void)
{
- warn_early_printk();
arch_local_irq_disable_all();
smp_send_stop();
hv_power_off();