Merge branch 'master'; commit 'v2.6.38-rc7' into next

1 files changed, 27 insertions, 16 deletions

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index b6fccb07123e..d5ed94d30aad 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -51,6 +51,7 @@ config X86
 	select HAVE_KERNEL_GZIP
 	select HAVE_KERNEL_BZIP2
 	select HAVE_KERNEL_LZMA
+	select HAVE_KERNEL_XZ
 	select HAVE_KERNEL_LZO
 	select HAVE_HW_BREAKPOINT
 	select HAVE_MIXED_BREAKPOINTS_REGS
@@ -65,6 +66,7 @@ config X86
 	select HAVE_SPARSE_IRQ
 	select GENERIC_IRQ_PROBE
 	select GENERIC_PENDING_IRQ if SMP
+	select USE_GENERIC_SMP_HELPERS if SMP
 
 config INSTRUCTION_DECODER
 	def_bool (KPROBES || PERF_EVENTS)
@@ -203,10 +205,6 @@ config HAVE_INTEL_TXT
 	def_bool y
 	depends on EXPERIMENTAL && DMAR && ACPI
 
-config USE_GENERIC_SMP_HELPERS
-	def_bool y
-	depends on SMP
-
 config X86_32_SMP
 	def_bool y
 	depends on X86_32 && SMP
@@ -629,11 +627,11 @@ config APB_TIMER
          as it is off-chip. APB timers are always running regardless of CPU
          C states, they are used as per CPU clockevent device when possible.
 
-# Mark as embedded because too many people got it wrong.
+# Mark as expert because too many people got it wrong.
 # The code disables itself when not needed.
 config DMI
 	default y
-	bool "Enable DMI scanning" if EMBEDDED
+	bool "Enable DMI scanning" if EXPERT
 	---help---
 	  Enabled scanning of DMI to identify machine quirks. Say Y
 	  here unless you have verified that your setup is not
@@ -641,7 +639,7 @@ config DMI
 	  BIOS code.
 
 config GART_IOMMU
-	bool "GART IOMMU support" if EMBEDDED
+	bool "GART IOMMU support" if EXPERT
 	default y
 	select SWIOTLB
 	depends on X86_64 && PCI && AMD_NB
@@ -891,7 +889,7 @@ config X86_THERMAL_VECTOR
 	depends on X86_MCE_INTEL
 
 config VM86
-	bool "Enable VM86 support" if EMBEDDED
+	bool "Enable VM86 support" if EXPERT
 	default y
 	depends on X86_32
 	---help---
@@ -1075,7 +1073,7 @@ endchoice
 
 choice
 	depends on EXPERIMENTAL
-	prompt "Memory split" if EMBEDDED
+	prompt "Memory split" if EXPERT
 	default VMSPLIT_3G
 	depends on X86_32
 	---help---
@@ -1137,7 +1135,7 @@ config ARCH_DMA_ADDR_T_64BIT
 	def_bool X86_64 || HIGHMEM64G
 
 config DIRECT_GBPAGES
-	bool "Enable 1GB pages for kernel pagetables" if EMBEDDED
+	bool "Enable 1GB pages for kernel pagetables" if EXPERT
 	default y
 	depends on X86_64
 	---help---
@@ -1371,7 +1369,7 @@ config MATH_EMULATION
 
 config MTRR
 	def_bool y
-	prompt "MTRR (Memory Type Range Register) support" if EMBEDDED
+	prompt "MTRR (Memory Type Range Register) support" if EXPERT
 	---help---
 	  On Intel P6 family processors (Pentium Pro, Pentium II and later)
 	  the Memory Type Range Registers (MTRRs) may be used to control
@@ -1437,7 +1435,7 @@ config MTRR_SANITIZER_SPARE_REG_NR_DEFAULT
 
 config X86_PAT
 	def_bool y
-	prompt "x86 PAT support" if EMBEDDED
+	prompt "x86 PAT support" if EXPERT
 	depends on MTRR
 	---help---
 	  Use PAT attributes to setup page level cache control.
@@ -1541,7 +1539,7 @@ config KEXEC_JUMP
 	  code in physical address mode via KEXEC
 
 config PHYSICAL_START
-	hex "Physical address where the kernel is loaded" if (EMBEDDED || CRASH_DUMP)
+	hex "Physical address where the kernel is loaded" if (EXPERT || CRASH_DUMP)
 	default "0x1000000"
 	---help---
 	  This gives the physical address where the kernel is loaded.
@@ -1936,13 +1934,19 @@ config PCI_MMCONFIG
 	depends on X86_64 && PCI && ACPI
 
 config PCI_CNB20LE_QUIRK
-	bool "Read CNB20LE Host Bridge Windows"
-	depends on PCI
+	bool "Read CNB20LE Host Bridge Windows" if EXPERT
+	default n
+	depends on PCI && EXPERIMENTAL
 	help
 	  Read the PCI windows out of the CNB20LE host bridge. This allows
 	  PCI hotplug to work on systems with the CNB20LE chipset which do
 	  not have ACPI.
 
+	  There's no public spec for this chipset, and this functionality
+	  is known to be incomplete.
+
+	  You should say N unless you know you need this.
+
 config DMAR
 	bool "Support for DMA Remapping Devices (EXPERIMENTAL)"
 	depends on PCI_MSI && ACPI && EXPERIMENTAL
@@ -2064,13 +2068,14 @@ config OLPC
 	bool "One Laptop Per Child support"
 	select GPIOLIB
 	select OLPC_OPENFIRMWARE
+	depends on !X86_64 && !X86_PAE
 	---help---
 	  Add support for detecting the unique features of the OLPC
 	  XO hardware.
 
 config OLPC_XO1
 	tristate "OLPC XO-1 support"
-	depends on OLPC && PCI
+	depends on OLPC && MFD_CS5535
 	---help---
 	  Add support for non-essential features of the OLPC XO-1 laptop.
 
@@ -2078,11 +2083,17 @@ config OLPC_OPENFIRMWARE
 	bool "Support for OLPC's Open Firmware"
 	depends on !X86_64 && !X86_PAE
 	default n
+	select OF
 	help
 	  This option adds support for the implementation of Open Firmware
 	  that is used on the OLPC XO-1 Children's Machine.
 	  If unsure, say N here.
 
+config OLPC_OPENFIRMWARE_DT
+	bool
+	default y if OLPC_OPENFIRMWARE && PROC_DEVICETREE
+	select OF_PROMTREE
+
 endif # X86_32
 
 config AMD_NB