x86/efi: Avoid triple faults during EFI mixed mode calls

Andy pointed out that if an NMI or MCE is received while we're in the
middle of an EFI mixed mode call a triple fault will occur. This can
happen, for example, when issuing an EFI mixed mode call while running
perf.

The reason for the triple fault is that we execute the mixed mode call
in 32-bit mode with paging disabled but with 64-bit kernel IDT handlers
installed throughout the call.

At Andy's suggestion, stop playing the games we currently do at runtime,
such as disabling paging and installing a 32-bit GDT for __KERNEL_CS. We
can simply switch to the __KERNEL32_CS descriptor before invoking
firmware services, and run in compatibility mode. This way, if an
NMI/MCE does occur the kernel IDT handler will execute correctly, since
it'll jump to __KERNEL_CS automatically.

However, this change is only possible post-ExitBootServices(). Before
then the firmware "owns" the machine and expects for its 32-bit IDT
handlers to be left intact to service interrupts, etc.

So, we now need to distinguish between early boot and runtime
invocations of EFI services. During early boot, we need to restore the
GDT that the firmware expects to be present. We can only jump to the
__KERNEL32_CS code segment for mixed mode calls after ExitBootServices()
has been invoked.

A liberal sprinkling of comments in the thunking code should make the
differences in early and late environments more apparent.

Reported-by: Andy Lutomirski <luto@amacapital.net>
Tested-by: Borislav Petkov <bp@suse.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>

1 files changed, 196 insertions, 0 deletions

diff --git a/arch/x86/boot/compressed/efi_thunk_64.S b/arch/x86/boot/compressed/efi_thunk_64.S
new file mode 100644
index 000000000000..630384a4c14a
--- /dev/null
+++ b/arch/x86/boot/compressed/efi_thunk_64.S
@@ -0,0 +1,196 @@
+/*
+ * Copyright (C) 2014, 2015 Intel Corporation; author Matt Fleming
+ *
+ * Early support for invoking 32-bit EFI services from a 64-bit kernel.
+ *
+ * Because this thunking occurs before ExitBootServices() we have to
+ * restore the firmware's 32-bit GDT before we make EFI serivce calls,
+ * since the firmware's 32-bit IDT is still currently installed and it
+ * needs to be able to service interrupts.
+ *
+ * On the plus side, we don't have to worry about mangling 64-bit
+ * addresses into 32-bits because we're executing with an identify
+ * mapped pagetable and haven't transitioned to 64-bit virtual addresses
+ * yet.
+ */
+
+#include <linux/linkage.h>
+#include <asm/msr.h>
+#include <asm/page_types.h>
+#include <asm/processor-flags.h>
+#include <asm/segment.h>
+
+	.code64
+	.text
+ENTRY(efi64_thunk)
+	push	%rbp
+	push	%rbx
+
+	subq	$8, %rsp
+	leaq	efi_exit32(%rip), %rax
+	movl	%eax, 4(%rsp)
+	leaq	efi_gdt64(%rip), %rax
+	movl	%eax, (%rsp)
+	movl	%eax, 2(%rax)		/* Fixup the gdt base address */
+
+	movl	%ds, %eax
+	push	%rax
+	movl	%es, %eax
+	push	%rax
+	movl	%ss, %eax
+	push	%rax
+
+	/*
+	 * Convert x86-64 ABI params to i386 ABI
+	 */
+	subq	$32, %rsp
+	movl	%esi, 0x0(%rsp)
+	movl	%edx, 0x4(%rsp)
+	movl	%ecx, 0x8(%rsp)
+	movq	%r8, %rsi
+	movl	%esi, 0xc(%rsp)
+	movq	%r9, %rsi
+	movl	%esi,  0x10(%rsp)
+
+	sgdt	save_gdt(%rip)
+
+	leaq	1f(%rip), %rbx
+	movq	%rbx, func_rt_ptr(%rip)
+
+	/*
+	 * Switch to gdt with 32-bit segments. This is the firmware GDT
+	 * that was installed when the kernel started executing. This
+	 * pointer was saved at the EFI stub entry point in head_64.S.
+	 */
+	leaq	efi32_boot_gdt(%rip), %rax
+	lgdt	(%rax)
+
+	pushq	$__KERNEL_CS
+	leaq	efi_enter32(%rip), %rax
+	pushq	%rax
+	lretq
+
+1:	addq	$32, %rsp
+
+	lgdt	save_gdt(%rip)
+
+	pop	%rbx
+	movl	%ebx, %ss
+	pop	%rbx
+	movl	%ebx, %es
+	pop	%rbx
+	movl	%ebx, %ds
+
+	/*
+	 * Convert 32-bit status code into 64-bit.
+	 */
+	test	%rax, %rax
+	jz	1f
+	movl	%eax, %ecx
+	andl	$0x0fffffff, %ecx
+	andl	$0xf0000000, %eax
+	shl	$32, %rax
+	or	%rcx, %rax
+1:
+	addq	$8, %rsp
+	pop	%rbx
+	pop	%rbp
+	ret
+ENDPROC(efi64_thunk)
+
+ENTRY(efi_exit32)
+	movq	func_rt_ptr(%rip), %rax
+	push	%rax
+	mov	%rdi, %rax
+	ret
+ENDPROC(efi_exit32)
+
+	.code32
+/*
+ * EFI service pointer must be in %edi.
+ *
+ * The stack should represent the 32-bit calling convention.
+ */
+ENTRY(efi_enter32)
+	movl	$__KERNEL_DS, %eax
+	movl	%eax, %ds
+	movl	%eax, %es
+	movl	%eax, %ss
+
+	/* Reload pgtables */
+	movl	%cr3, %eax
+	movl	%eax, %cr3
+
+	/* Disable paging */
+	movl	%cr0, %eax
+	btrl	$X86_CR0_PG_BIT, %eax
+	movl	%eax, %cr0
+
+	/* Disable long mode via EFER */
+	movl	$MSR_EFER, %ecx
+	rdmsr
+	btrl	$_EFER_LME, %eax
+	wrmsr
+
+	call	*%edi
+
+	/* We must preserve return value */
+	movl	%eax, %edi
+
+	/*
+	 * Some firmware will return with interrupts enabled. Be sure to
+	 * disable them before we switch GDTs.
+	 */
+	cli
+
+	movl	56(%esp), %eax
+	movl	%eax, 2(%eax)
+	lgdtl	(%eax)
+
+	movl	%cr4, %eax
+	btsl	$(X86_CR4_PAE_BIT), %eax
+	movl	%eax, %cr4
+
+	movl	%cr3, %eax
+	movl	%eax, %cr3
+
+	movl	$MSR_EFER, %ecx
+	rdmsr
+	btsl	$_EFER_LME, %eax
+	wrmsr
+
+	xorl	%eax, %eax
+	lldt	%ax
+
+	movl	60(%esp), %eax
+	pushl	$__KERNEL_CS
+	pushl	%eax
+
+	/* Enable paging */
+	movl	%cr0, %eax
+	btsl	$X86_CR0_PG_BIT, %eax
+	movl	%eax, %cr0
+	lret
+ENDPROC(efi_enter32)
+
+	.data
+	.balign	8
+	.global	efi32_boot_gdt
+efi32_boot_gdt:	.word	0
+		.quad	0
+
+save_gdt:	.word	0
+		.quad	0
+func_rt_ptr:	.quad	0
+
+	.global efi_gdt64
+efi_gdt64:
+	.word	efi_gdt64_end - efi_gdt64
+	.long	0			/* Filled out by user */
+	.word	0
+	.quad	0x0000000000000000	/* NULL descriptor */
+	.quad	0x00af9a000000ffff	/* __KERNEL_CS */
+	.quad	0x00cf92000000ffff	/* __KERNEL_DS */
+	.quad	0x0080890000000000	/* TS descriptor */
+	.quad   0x0000000000000000	/* TS continued */
+efi_gdt64_end: