Merge branch 'x86/platform' into x86/apic-cleanups

Reason: apic cleanup series depends on x86/apic, x86/amd-nb and x86/platform

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

6 files changed, 21 insertions, 322 deletions

diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index 9e13763b6092..f60153d5de57 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -84,7 +84,6 @@ obj-$(CONFIG_DOUBLEFAULT) 	+= doublefault_32.o
 obj-$(CONFIG_KGDB)		+= kgdb.o
 obj-$(CONFIG_VM86)		+= vm86_32.o
 obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
-obj-$(CONFIG_EARLY_PRINTK_MRST)	+= early_printk_mrst.o
 
 obj-$(CONFIG_HPET_TIMER) 	+= hpet.o
 obj-$(CONFIG_APB_TIMER)		+= apb_timer.o
diff --git a/arch/x86/kernel/apb_timer.c b/arch/x86/kernel/apb_timer.c
index 92543c73cf8e..7c9ab59653e8 100644
--- a/arch/x86/kernel/apb_timer.c
+++ b/arch/x86/kernel/apb_timer.c
@@ -315,6 +315,7 @@ static void apbt_setup_irq(struct apbt_dev *adev)
 
 	if (system_state == SYSTEM_BOOTING) {
 		irq_modify_status(adev->irq, 0, IRQ_MOVE_PCNTXT);
+		irq_set_affinity(adev->irq, cpumask_of(adev->cpu));
 		/* APB timer irqs are set up as mp_irqs, timer is edge type */
 		__set_irq_handler(adev->irq, handle_edge_irq, 0, "edge");
 		if (request_irq(adev->irq, apbt_interrupt_handler,
diff --git a/arch/x86/kernel/early_printk.c b/arch/x86/kernel/early_printk.c
index 4572f25f9325..cd28a350f7f9 100644
--- a/arch/x86/kernel/early_printk.c
+++ b/arch/x86/kernel/early_printk.c
@@ -240,7 +240,7 @@ static int __init setup_early_printk(char *buf)
 		if (!strncmp(buf, "xen", 3))
 			early_console_register(&xenboot_console, keep);
 #endif
-#ifdef CONFIG_X86_MRST_EARLY_PRINTK
+#ifdef CONFIG_EARLY_PRINTK_MRST
 		if (!strncmp(buf, "mrst", 4)) {
 			mrst_early_console_init();
 			early_console_register(&early_mrst_console, keep);
@@ -250,7 +250,6 @@ static int __init setup_early_printk(char *buf)
 			hsu_early_console_init();
 			early_console_register(&early_hsu_console, keep);
 		}
-
 #endif
 		buf++;
 	}
diff --git a/arch/x86/kernel/early_printk_mrst.c b/arch/x86/kernel/early_printk_mrst.c
deleted file mode 100644
index 65df603622b2..000000000000
--- a/arch/x86/kernel/early_printk_mrst.c
+++ /dev/null
@@ -1,319 +0,0 @@
-/*
- * early_printk_mrst.c - early consoles for Intel MID platforms
- *
- * Copyright (c) 2008-2010, Intel Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; version 2
- * of the License.
- */
-
-/*
- * This file implements two early consoles named mrst and hsu.
- * mrst is based on Maxim3110 spi-uart device, it exists in both
- * Moorestown and Medfield platforms, while hsu is based on a High
- * Speed UART device which only exists in the Medfield platform
- */
-
-#include <linux/serial_reg.h>
-#include <linux/serial_mfd.h>
-#include <linux/kmsg_dump.h>
-#include <linux/console.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/io.h>
-
-#include <asm/fixmap.h>
-#include <asm/pgtable.h>
-#include <asm/mrst.h>
-
-#define MRST_SPI_TIMEOUT		0x200000
-#define MRST_REGBASE_SPI0		0xff128000
-#define MRST_REGBASE_SPI1		0xff128400
-#define MRST_CLK_SPI0_REG		0xff11d86c
-
-/* Bit fields in CTRLR0 */
-#define SPI_DFS_OFFSET			0
-
-#define SPI_FRF_OFFSET			4
-#define SPI_FRF_SPI			0x0
-#define SPI_FRF_SSP			0x1
-#define SPI_FRF_MICROWIRE		0x2
-#define SPI_FRF_RESV			0x3
-
-#define SPI_MODE_OFFSET			6
-#define SPI_SCPH_OFFSET			6
-#define SPI_SCOL_OFFSET			7
-#define SPI_TMOD_OFFSET			8
-#define	SPI_TMOD_TR			0x0		/* xmit & recv */
-#define SPI_TMOD_TO			0x1		/* xmit only */
-#define SPI_TMOD_RO			0x2		/* recv only */
-#define SPI_TMOD_EPROMREAD		0x3		/* eeprom read mode */
-
-#define SPI_SLVOE_OFFSET		10
-#define SPI_SRL_OFFSET			11
-#define SPI_CFS_OFFSET			12
-
-/* Bit fields in SR, 7 bits */
-#define SR_MASK				0x7f		/* cover 7 bits */
-#define SR_BUSY				(1 << 0)
-#define SR_TF_NOT_FULL			(1 << 1)
-#define SR_TF_EMPT			(1 << 2)
-#define SR_RF_NOT_EMPT			(1 << 3)
-#define SR_RF_FULL			(1 << 4)
-#define SR_TX_ERR			(1 << 5)
-#define SR_DCOL				(1 << 6)
-
-struct dw_spi_reg {
-	u32	ctrl0;
-	u32	ctrl1;
-	u32	ssienr;
-	u32	mwcr;
-	u32	ser;
-	u32	baudr;
-	u32	txfltr;
-	u32	rxfltr;
-	u32	txflr;
-	u32	rxflr;
-	u32	sr;
-	u32	imr;
-	u32	isr;
-	u32	risr;
-	u32	txoicr;
-	u32	rxoicr;
-	u32	rxuicr;
-	u32	msticr;
-	u32	icr;
-	u32	dmacr;
-	u32	dmatdlr;
-	u32	dmardlr;
-	u32	idr;
-	u32	version;
-
-	/* Currently operates as 32 bits, though only the low 16 bits matter */
-	u32	dr;
-} __packed;
-
-#define dw_readl(dw, name)		__raw_readl(&(dw)->name)
-#define dw_writel(dw, name, val)	__raw_writel((val), &(dw)->name)
-
-/* Default use SPI0 register for mrst, we will detect Penwell and use SPI1 */
-static unsigned long mrst_spi_paddr = MRST_REGBASE_SPI0;
-
-static u32 *pclk_spi0;
-/* Always contains an accessable address, start with 0 */
-static struct dw_spi_reg *pspi;
-
-static struct kmsg_dumper dw_dumper;
-static int dumper_registered;
-
-static void dw_kmsg_dump(struct kmsg_dumper *dumper,
-			enum kmsg_dump_reason reason,
-			const char *s1, unsigned long l1,
-			const char *s2, unsigned long l2)
-{
-	int i;
-
-	/* When run to this, we'd better re-init the HW */
-	mrst_early_console_init();
-
-	for (i = 0; i < l1; i++)
-		early_mrst_console.write(&early_mrst_console, s1 + i, 1);
-	for (i = 0; i < l2; i++)
-		early_mrst_console.write(&early_mrst_console, s2 + i, 1);
-}
-
-/* Set the ratio rate to 115200, 8n1, IRQ disabled */
-static void max3110_write_config(void)
-{
-	u16 config;
-
-	config = 0xc001;
-	dw_writel(pspi, dr, config);
-}
-
-/* Translate char to a eligible word and send to max3110 */
-static void max3110_write_data(char c)
-{
-	u16 data;
-
-	data = 0x8000 | c;
-	dw_writel(pspi, dr, data);
-}
-
-void mrst_early_console_init(void)
-{
-	u32 ctrlr0 = 0;
-	u32 spi0_cdiv;
-	u32 freq; /* Freqency info only need be searched once */
-
-	/* Base clk is 100 MHz, the actual clk = 100M / (clk_divider + 1) */
-	pclk_spi0 = (void *)set_fixmap_offset_nocache(FIX_EARLYCON_MEM_BASE,
-							MRST_CLK_SPI0_REG);
-	spi0_cdiv = ((*pclk_spi0) & 0xe00) >> 9;
-	freq = 100000000 / (spi0_cdiv + 1);
-
-	if (mrst_identify_cpu() == MRST_CPU_CHIP_PENWELL)
-		mrst_spi_paddr = MRST_REGBASE_SPI1;
-
-	pspi = (void *)set_fixmap_offset_nocache(FIX_EARLYCON_MEM_BASE,
-						mrst_spi_paddr);
-
-	/* Disable SPI controller */
-	dw_writel(pspi, ssienr, 0);
-
-	/* Set control param, 8 bits, transmit only mode */
-	ctrlr0 = dw_readl(pspi, ctrl0);
-
-	ctrlr0 &= 0xfcc0;
-	ctrlr0 |= 0xf | (SPI_FRF_SPI << SPI_FRF_OFFSET)
-		      | (SPI_TMOD_TO << SPI_TMOD_OFFSET);
-	dw_writel(pspi, ctrl0, ctrlr0);
-
-	/*
-	 * Change the spi0 clk to comply with 115200 bps, use 100000 to
-	 * calculate the clk dividor to make the clock a little slower
-	 * than real baud rate.
-	 */
-	dw_writel(pspi, baudr, freq/100000);
-
-	/* Disable all INT for early phase */
-	dw_writel(pspi, imr, 0x0);
-
-	/* Set the cs to spi-uart */
-	dw_writel(pspi, ser, 0x2);
-
-	/* Enable the HW, the last step for HW init */
-	dw_writel(pspi, ssienr, 0x1);
-
-	/* Set the default configuration */
-	max3110_write_config();
-
-	/* Register the kmsg dumper */
-	if (!dumper_registered) {
-		dw_dumper.dump = dw_kmsg_dump;
-		kmsg_dump_register(&dw_dumper);
-		dumper_registered = 1;
-	}
-}
-
-/* Slave select should be called in the read/write function */
-static void early_mrst_spi_putc(char c)
-{
-	unsigned int timeout;
-	u32 sr;
-
-	timeout = MRST_SPI_TIMEOUT;
-	/* Early putc needs to make sure the TX FIFO is not full */
-	while (--timeout) {
-		sr = dw_readl(pspi, sr);
-		if (!(sr & SR_TF_NOT_FULL))
-			cpu_relax();
-		else
-			break;
-	}
-
-	if (!timeout)
-		pr_warning("MRST earlycon: timed out\n");
-	else
-		max3110_write_data(c);
-}
-
-/* Early SPI only uses polling mode */
-static void early_mrst_spi_write(struct console *con, const char *str, unsigned n)
-{
-	int i;
-
-	for (i = 0; i < n && *str; i++) {
-		if (*str == '\n')
-			early_mrst_spi_putc('\r');
-		early_mrst_spi_putc(*str);
-		str++;
-	}
-}
-
-struct console early_mrst_console = {
-	.name =		"earlymrst",
-	.write =	early_mrst_spi_write,
-	.flags =	CON_PRINTBUFFER,
-	.index =	-1,
-};
-
-/*
- * Following is the early console based on Medfield HSU (High
- * Speed UART) device.
- */
-#define HSU_PORT2_PADDR		0xffa28180
-
-static void __iomem *phsu;
-
-void hsu_early_console_init(void)
-{
-	u8 lcr;
-
-	phsu = (void *)set_fixmap_offset_nocache(FIX_EARLYCON_MEM_BASE,
-							HSU_PORT2_PADDR);
-
-	/* Disable FIFO */
-	writeb(0x0, phsu + UART_FCR);
-
-	/* Set to default 115200 bps, 8n1 */
-	lcr = readb(phsu + UART_LCR);
-	writeb((0x80 | lcr), phsu + UART_LCR);
-	writeb(0x18, phsu + UART_DLL);
-	writeb(lcr,  phsu + UART_LCR);
-	writel(0x3600, phsu + UART_MUL*4);
-
-	writeb(0x8, phsu + UART_MCR);
-	writeb(0x7, phsu + UART_FCR);
-	writeb(0x3, phsu + UART_LCR);
-
-	/* Clear IRQ status */
-	readb(phsu + UART_LSR);
-	readb(phsu + UART_RX);
-	readb(phsu + UART_IIR);
-	readb(phsu + UART_MSR);
-
-	/* Enable FIFO */
-	writeb(0x7, phsu + UART_FCR);
-}
-
-#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
-
-static void early_hsu_putc(char ch)
-{
-	unsigned int timeout = 10000; /* 10ms */
-	u8 status;
-
-	while (--timeout) {
-		status = readb(phsu + UART_LSR);
-		if (status & BOTH_EMPTY)
-			break;
-		udelay(1);
-	}
-
-	/* Only write the char when there was no timeout */
-	if (timeout)
-		writeb(ch, phsu + UART_TX);
-}
-
-static void early_hsu_write(struct console *con, const char *str, unsigned n)
-{
-	int i;
-
-	for (i = 0; i < n && *str; i++) {
-		if (*str == '\n')
-			early_hsu_putc('\r');
-		early_hsu_putc(*str);
-		str++;
-	}
-}
-
-struct console early_hsu_console = {
-	.name =		"earlyhsu",
-	.write =	early_hsu_write,
-	.flags =	CON_PRINTBUFFER,
-	.index =	-1,
-};
diff --git a/arch/x86/kernel/head32.c b/arch/x86/kernel/head32.c
index 763310165fa0..7f138b3c3c52 100644
--- a/arch/x86/kernel/head32.c
+++ b/arch/x86/kernel/head32.c
@@ -61,6 +61,9 @@ void __init i386_start_kernel(void)
 	case X86_SUBARCH_MRST:
 		x86_mrst_early_setup();
 		break;
+	case X86_SUBARCH_CE4100:
+		x86_ce4100_early_setup();
+		break;
 	default:
 		i386_default_early_setup();
 		break;
diff --git a/arch/x86/kernel/reboot_fixups_32.c b/arch/x86/kernel/reboot_fixups_32.c
index fda313ebbb03..c8e41e90f59c 100644
--- a/arch/x86/kernel/reboot_fixups_32.c
+++ b/arch/x86/kernel/reboot_fixups_32.c
@@ -43,17 +43,33 @@ static void rdc321x_reset(struct pci_dev *dev)
 	outb(1, 0x92);
 }
 
+static void ce4100_reset(struct pci_dev *dev)
+{
+	int i;
+
+	for (i = 0; i < 10; i++) {
+		outb(0x2, 0xcf9);
+		udelay(50);
+	}
+}
+
 struct device_fixup {
 	unsigned int vendor;
 	unsigned int device;
 	void (*reboot_fixup)(struct pci_dev *);
 };
 
+/*
+ * PCI ids solely used for fixups_table go here
+ */
+#define PCI_DEVICE_ID_INTEL_CE4100	0x0708
+
 static const struct device_fixup fixups_table[] = {
 { PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5530_LEGACY, cs5530a_warm_reset },
 { PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA, cs5536_warm_reset },
 { PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_SC1100_BRIDGE, cs5530a_warm_reset },
 { PCI_VENDOR_ID_RDC, PCI_DEVICE_ID_RDC_R6030, rdc321x_reset },
+{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CE4100, ce4100_reset },
 };
 
 /*