Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:
 "Most notable changes in here:

   1) By far the biggest accomplishment, thanks to a large range of
      contributors, is the addition of multi-send for transmit.  This is
      the result of discussions back in Chicago, and the hard work of
      several individuals.

      Now, when the ->ndo_start_xmit() method of a driver sees
      skb->xmit_more as true, it can choose to defer the doorbell
      telling the driver to start processing the new TX queue entires.

      skb->xmit_more means that the generic networking is guaranteed to
      call the driver immediately with another SKB to send.

      There is logic added to the qdisc layer to dequeue multiple
      packets at a time, and the handling mis-predicted offloads in
      software is now done with no locks held.

      Finally, pktgen is extended to have a "burst" parameter that can
      be used to test a multi-send implementation.

      Several drivers have xmit_more support: i40e, igb, ixgbe, mlx4,
      virtio_net

      Adding support is almost trivial, so export more drivers to
      support this optimization soon.

      I want to thank, in no particular or implied order, Jesper
      Dangaard Brouer, Eric Dumazet, Alexander Duyck, Tom Herbert, Jamal
      Hadi Salim, John Fastabend, Florian Westphal, Daniel Borkmann,
      David Tat, Hannes Frederic Sowa, and Rusty Russell.

   2) PTP and timestamping support in bnx2x, from Michal Kalderon.

   3) Allow adjusting the rx_copybreak threshold for a driver via
      ethtool, and add rx_copybreak support to enic driver.  From
      Govindarajulu Varadarajan.

   4) Significant enhancements to the generic PHY layer and the bcm7xxx
      driver in particular (EEE support, auto power down, etc.) from
      Florian Fainelli.

   5) Allow raw buffers to be used for flow dissection, allowing drivers
      to determine the optimal "linear pull" size for devices that DMA
      into pools of pages.  The objective is to get exactly the
      necessary amount of headers into the linear SKB area pre-pulled,
      but no more.  The new interface drivers use is eth_get_headlen().
      From WANG Cong, with driver conversions (several had their own
      by-hand duplicated implementations) by Alexander Duyck and Eric
      Dumazet.

   6) Support checksumming more smoothly and efficiently for
      encapsulations, and add "foo over UDP" facility.  From Tom
      Herbert.

   7) Add Broadcom SF2 switch driver to DSA layer, from Florian
      Fainelli.

   8) eBPF now can load programs via a system call and has an extensive
      testsuite.  Alexei Starovoitov and Daniel Borkmann.

   9) Major overhaul of the packet scheduler to use RCU in several major
      areas such as the classifiers and rate estimators.  From John
      Fastabend.

  10) Add driver for Intel FM10000 Ethernet Switch, from Alexander
      Duyck.

  11) Rearrange TCP_SKB_CB() to reduce cache line misses, from Eric
      Dumazet.

  12) Add Datacenter TCP congestion control algorithm support, From
      Florian Westphal.

  13) Reorganize sk_buff so that __copy_skb_header() is significantly
      faster.  From Eric Dumazet"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1558 commits)
  netlabel: directly return netlbl_unlabel_genl_init()
  net: add netdev_txq_bql_{enqueue, complete}_prefetchw() helpers
  net: description of dma_cookie cause make xmldocs warning
  cxgb4: clean up a type issue
  cxgb4: potential shift wrapping bug
  i40e: skb->xmit_more support
  net: fs_enet: Add NAPI TX
  net: fs_enet: Remove non NAPI RX
  r8169:add support for RTL8168EP
  net_sched: copy exts->type in tcf_exts_change()
  wimax: convert printk to pr_foo()
  af_unix: remove 0 assignment on static
  ipv6: Do not warn for informational ICMP messages, regardless of type.
  Update Intel Ethernet Driver maintainers list
  bridge: Save frag_max_size between PRE_ROUTING and POST_ROUTING
  tipc: fix bug in multicast congestion handling
  net: better IFF_XMIT_DST_RELEASE support
  net/mlx4_en: remove NETDEV_TX_BUSY
  3c59x: fix bad split of cpu_to_le32(pci_map_single())
  net: bcmgenet: fix Tx ring priority programming
  ...

3 files changed, 79 insertions, 52 deletions

diff --git a/arch/x86/net/bpf_jit_comp.c b/arch/x86/net/bpf_jit_comp.c
index 5c8cb8043c5a..d56cd1f515bd 100644
--- a/arch/x86/net/bpf_jit_comp.c
+++ b/arch/x86/net/bpf_jit_comp.c
@@ -8,12 +8,10 @@
  * as published by the Free Software Foundation; version 2
  * of the License.
  */
-#include <linux/moduleloader.h>
-#include <asm/cacheflush.h>
 #include <linux/netdevice.h>
 #include <linux/filter.h>
 #include <linux/if_vlan.h>
-#include <linux/random.h>
+#include <asm/cacheflush.h>
 
 int bpf_jit_enable __read_mostly;
 
@@ -109,39 +107,6 @@ static inline void bpf_flush_icache(void *start, void *end)
 #define CHOOSE_LOAD_FUNC(K, func) \
 	((int)K < 0 ? ((int)K >= SKF_LL_OFF ? func##_negative_offset : func) : func##_positive_offset)
 
-struct bpf_binary_header {
-	unsigned int	pages;
-	/* Note : for security reasons, bpf code will follow a randomly
-	 * sized amount of int3 instructions
-	 */
-	u8		image[];
-};
-
-static struct bpf_binary_header *bpf_alloc_binary(unsigned int proglen,
-						  u8 **image_ptr)
-{
-	unsigned int sz, hole;
-	struct bpf_binary_header *header;
-
-	/* Most of BPF filters are really small,
-	 * but if some of them fill a page, allow at least
-	 * 128 extra bytes to insert a random section of int3
-	 */
-	sz = round_up(proglen + sizeof(*header) + 128, PAGE_SIZE);
-	header = module_alloc(sz);
-	if (!header)
-		return NULL;
-
-	memset(header, 0xcc, sz); /* fill whole space with int3 instructions */
-
-	header->pages = sz / PAGE_SIZE;
-	hole = min(sz - (proglen + sizeof(*header)), PAGE_SIZE - sizeof(*header));
-
-	/* insert a random number of int3 instructions before BPF code */
-	*image_ptr = &header->image[prandom_u32() % hole];
-	return header;
-}
-
 /* pick a register outside of BPF range for JIT internal work */
 #define AUX_REG (MAX_BPF_REG + 1)
 
@@ -206,6 +171,12 @@ static inline u8 add_2reg(u8 byte, u32 dst_reg, u32 src_reg)
 	return byte + reg2hex[dst_reg] + (reg2hex[src_reg] << 3);
 }
 
+static void jit_fill_hole(void *area, unsigned int size)
+{
+	/* fill whole space with int3 instructions */
+	memset(area, 0xcc, size);
+}
+
 struct jit_context {
 	unsigned int cleanup_addr; /* epilogue code offset */
 	bool seen_ld_abs;
@@ -393,6 +364,23 @@ static int do_jit(struct bpf_prog *bpf_prog, int *addrs, u8 *image,
 			EMIT1_off32(add_1reg(0xB8, dst_reg), imm32);
 			break;
 
+		case BPF_LD | BPF_IMM | BPF_DW:
+			if (insn[1].code != 0 || insn[1].src_reg != 0 ||
+			    insn[1].dst_reg != 0 || insn[1].off != 0) {
+				/* verifier must catch invalid insns */
+				pr_err("invalid BPF_LD_IMM64 insn\n");
+				return -EINVAL;
+			}
+
+			/* movabsq %rax, imm64 */
+			EMIT2(add_1mod(0x48, dst_reg), add_1reg(0xB8, dst_reg));
+			EMIT(insn[0].imm, 4);
+			EMIT(insn[1].imm, 4);
+
+			insn++;
+			i++;
+			break;
+
 			/* dst %= src, dst /= src, dst %= imm32, dst /= imm32 */
 		case BPF_ALU | BPF_MOD | BPF_X:
 		case BPF_ALU | BPF_DIV | BPF_X:
@@ -515,6 +503,48 @@ static int do_jit(struct bpf_prog *bpf_prog, int *addrs, u8 *image,
 			EMIT3(0xC1, add_1reg(b3, dst_reg), imm32);
 			break;
 
+		case BPF_ALU | BPF_LSH | BPF_X:
+		case BPF_ALU | BPF_RSH | BPF_X:
+		case BPF_ALU | BPF_ARSH | BPF_X:
+		case BPF_ALU64 | BPF_LSH | BPF_X:
+		case BPF_ALU64 | BPF_RSH | BPF_X:
+		case BPF_ALU64 | BPF_ARSH | BPF_X:
+
+			/* check for bad case when dst_reg == rcx */
+			if (dst_reg == BPF_REG_4) {
+				/* mov r11, dst_reg */
+				EMIT_mov(AUX_REG, dst_reg);
+				dst_reg = AUX_REG;
+			}
+
+			if (src_reg != BPF_REG_4) { /* common case */
+				EMIT1(0x51); /* push rcx */
+
+				/* mov rcx, src_reg */
+				EMIT_mov(BPF_REG_4, src_reg);
+			}
+
+			/* shl %rax, %cl | shr %rax, %cl | sar %rax, %cl */
+			if (BPF_CLASS(insn->code) == BPF_ALU64)
+				EMIT1(add_1mod(0x48, dst_reg));
+			else if (is_ereg(dst_reg))
+				EMIT1(add_1mod(0x40, dst_reg));
+
+			switch (BPF_OP(insn->code)) {
+			case BPF_LSH: b3 = 0xE0; break;
+			case BPF_RSH: b3 = 0xE8; break;
+			case BPF_ARSH: b3 = 0xF8; break;
+			}
+			EMIT2(0xD3, add_1reg(b3, dst_reg));
+
+			if (src_reg != BPF_REG_4)
+				EMIT1(0x59); /* pop rcx */
+
+			if (insn->dst_reg == BPF_REG_4)
+				/* mov dst_reg, r11 */
+				EMIT_mov(insn->dst_reg, AUX_REG);
+			break;
+
 		case BPF_ALU | BPF_END | BPF_FROM_BE:
 			switch (imm32) {
 			case 16:
@@ -900,7 +930,7 @@ void bpf_int_jit_compile(struct bpf_prog *prog)
 		if (proglen <= 0) {
 			image = NULL;
 			if (header)
-				module_free(NULL, header);
+				bpf_jit_binary_free(header);
 			goto out;
 		}
 		if (image) {
@@ -910,7 +940,8 @@ void bpf_int_jit_compile(struct bpf_prog *prog)
 			break;
 		}
 		if (proglen == oldproglen) {
-			header = bpf_alloc_binary(proglen, &image);
+			header = bpf_jit_binary_alloc(proglen, &image,
+						      1, jit_fill_hole);
 			if (!header)
 				goto out;
 		}
@@ -924,29 +955,23 @@ void bpf_int_jit_compile(struct bpf_prog *prog)
 		bpf_flush_icache(header, image + proglen);
 		set_memory_ro((unsigned long)header, header->pages);
 		prog->bpf_func = (void *)image;
-		prog->jited = 1;
+		prog->jited = true;
 	}
 out:
 	kfree(addrs);
 }
 
-static void bpf_jit_free_deferred(struct work_struct *work)
+void bpf_jit_free(struct bpf_prog *fp)
 {
-	struct bpf_prog *fp = container_of(work, struct bpf_prog, work);
 	unsigned long addr = (unsigned long)fp->bpf_func & PAGE_MASK;
 	struct bpf_binary_header *header = (void *)addr;
 
+	if (!fp->jited)
+		goto free_filter;
+
 	set_memory_rw(addr, header->pages);
-	module_free(NULL, header);
-	kfree(fp);
-}
+	bpf_jit_binary_free(header);
 
-void bpf_jit_free(struct bpf_prog *fp)
-{
-	if (fp->jited) {
-		INIT_WORK(&fp->work, bpf_jit_free_deferred);
-		schedule_work(&fp->work);
-	} else {
-		kfree(fp);
-	}
+free_filter:
+	bpf_prog_unlock_free(fp);
 }
diff --git a/arch/x86/syscalls/syscall_32.tbl b/arch/x86/syscalls/syscall_32.tbl
index 028b78168d85..9fe1b5d002f0 100644
--- a/arch/x86/syscalls/syscall_32.tbl
+++ b/arch/x86/syscalls/syscall_32.tbl
@@ -363,3 +363,4 @@
 354	i386	seccomp			sys_seccomp
 355	i386	getrandom		sys_getrandom
 356	i386	memfd_create		sys_memfd_create
+357	i386	bpf			sys_bpf
diff --git a/arch/x86/syscalls/syscall_64.tbl b/arch/x86/syscalls/syscall_64.tbl
index 35dd922727b9..281150b539a2 100644
--- a/arch/x86/syscalls/syscall_64.tbl
+++ b/arch/x86/syscalls/syscall_64.tbl
@@ -327,6 +327,7 @@
 318	common	getrandom		sys_getrandom
 319	common	memfd_create		sys_memfd_create
 320	common	kexec_file_load		sys_kexec_file_load
+321	common	bpf			sys_bpf
 
 #
 # x32-specific system call numbers start at 512 to avoid cache impact