diff options
| author |   Quentin Schulz <quentin.schulz@bootlin.com> | 2020-06-23 16:30:14 +0200 |
|---|---|---|
| committer |   David S. Miller <davem@davemloft.net> | 2020-06-24 14:33:16 -0700 |
| commit | 15324652f61287e2e640ca47f2a044df6cccf4b3 (patch) | |
| tree | cb22728170f57906f92d708fdb9e505fa0a4ea14 /arch | |
| parent | dt-bindings: net: phy: vsc8531: document the load/save GPIO (diff) | |
| download | linux-dev-15324652f61287e2e640ca47f2a044df6cccf4b3.tar.xz linux-dev-15324652f61287e2e640ca47f2a044df6cccf4b3.zip | |
MIPS: dts: ocelot: describe the load/save GPIO
This patch adds a description of the load/save GPIN pin, used in the
VSC8584 PHY for timestamping operations. The related pinctrl description
is also added.
Signed-off-by: Quentin Schulz <quentin.schulz@bootlin.com>
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'arch')
| -rw-r--r-- | arch/mips/boot/dts/mscc/ocelot_pcb120.dts | 12 |
1 files changed, 11 insertions, 1 deletions
diff --git a/arch/mips/boot/dts/mscc/ocelot_pcb120.dts b/arch/mips/boot/dts/mscc/ocelot_pcb120.dts index 33991fd209f5..897de5025d7f 100644 --- a/arch/mips/boot/dts/mscc/ocelot_pcb120.dts +++ b/arch/mips/boot/dts/mscc/ocelot_pcb120.dts @@ -3,6 +3,7 @@ /dts-v1/; +#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/phy/phy-ocelot-serdes.h> #include "ocelot.dtsi" @@ -25,6 +26,11 @@ pins = "GPIO_4"; function = "gpio"; }; + + phy_load_save_pins: phy_load_save_pins { + pins = "GPIO_10"; + function = "ptp2"; + }; }; &mdio0 { @@ -34,27 +40,31 @@ &mdio1 { status = "okay"; pinctrl-names = "default"; - pinctrl-0 = <&miim1>, <&phy_int_pins>; + pinctrl-0 = <&miim1>, <&phy_int_pins>, <&phy_load_save_pins>; phy7: ethernet-phy@0 { reg = <0>; interrupts = <4 IRQ_TYPE_LEVEL_HIGH>; interrupt-parent = <&gpio>; + load-save-gpios = <&gpio 10 GPIO_ACTIVE_HIGH>; }; phy6: ethernet-phy@1 { reg = <1>; interrupts = <4 IRQ_TYPE_LEVEL_HIGH>; interrupt-parent = <&gpio>; + load-save-gpios = <&gpio 10 GPIO_ACTIVE_HIGH>; }; phy5: ethernet-phy@2 { reg = <2>; interrupts = <4 IRQ_TYPE_LEVEL_HIGH>; interrupt-parent = <&gpio>; + load-save-gpios = <&gpio 10 GPIO_ACTIVE_HIGH>; }; phy4: ethernet-phy@3 { reg = <3>; interrupts = <4 IRQ_TYPE_LEVEL_HIGH>; interrupt-parent = <&gpio>; + load-save-gpios = <&gpio 10 GPIO_ACTIVE_HIGH>; }; }; |