Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking changes from David S Miller:

 1) Remove the ipv4 routing cache.  Now lookups go directly into the FIB
    trie and use prebuilt routes cached there.

    No more garbage collection, no more rDOS attacks on the routing
    cache.  Instead we now get predictable and consistent performance,
    no matter what the pattern of traffic we service.

    This has been almost 2 years in the making.  Special thanks to
    Julian Anastasov, Eric Dumazet, Steffen Klassert, and others who
    have helped along the way.

    I'm sure that with a change of this magnitude there will be some
    kind of fallout, but such things ought the be simple to fix at this
    point.  Luckily I'm not European so I'll be around all of August to
    fix things :-)

    The major stages of this work here are each fronted by a forced
    merge commit whose commit message contains a top-level description
    of the motivations and implementation issues.

 2) Pre-demux of established ipv4 TCP sockets, saves a route demux on
    input.

 3) TCP SYN/ACK performance tweaks from Eric Dumazet.

 4) Add namespace support for netfilter L4 conntrack helpers, from Gao
    Feng.

 5) Add config mechanism for Energy Efficient Ethernet to ethtool, from
    Yuval Mintz.

 6) Remove quadratic behavior from /proc/net/unix, from Eric Dumazet.

 7) Support for connection tracker helpers in userspace, from Pablo
    Neira Ayuso.

 8) Allow userspace driven TX load balancing functions in TEAM driver,
    from Jiri Pirko.

 9) Kill off NLMSG_PUT and RTA_PUT macros, more gross stuff with
    embedded gotos.

10) TCP Small Queues, essentially minimize the amount of TCP data queued
    up in the packet scheduler layer.  Whereas the existing BQL (Byte
    Queue Limits) limits the pkt_sched --> netdevice queuing levels,
    this controls the TCP --> pkt_sched queueing levels.

    From Eric Dumazet.

11) Reduce the number of get_page/put_page ops done on SKB fragments,
    from Alexander Duyck.

12) Implement protection against blind resets in TCP (RFC 5961), from
    Eric Dumazet.

13) Support the client side of TCP Fast Open, basically the ability to
    send data in the SYN exchange, from Yuchung Cheng.

    Basically, the sender queues up data with a sendmsg() call using
    MSG_FASTOPEN, then they do the connect() which emits the queued up
    fastopen data.

14) Avoid all the problems we get into in TCP when timers or PMTU events
    hit a locked socket.  The TCP Small Queues changes added a
    tcp_release_cb() that allows us to queue work up to the
    release_sock() caller, and that's what we use here too.  From Eric
    Dumazet.

15) Zero copy on TX support for TUN driver, from Michael S. Tsirkin.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1870 commits)
  genetlink: define lockdep_genl_is_held() when CONFIG_LOCKDEP
  r8169: revert "add byte queue limit support".
  ipv4: Change rt->rt_iif encoding.
  net: Make skb->skb_iif always track skb->dev
  ipv4: Prepare for change of rt->rt_iif encoding.
  ipv4: Remove all RTCF_DIRECTSRC handliing.
  ipv4: Really ignore ICMP address requests/replies.
  decnet: Don't set RTCF_DIRECTSRC.
  net/ipv4/ip_vti.c: Fix __rcu warnings detected by sparse.
  ipv4: Remove redundant assignment
  rds: set correct msg_namelen
  openvswitch: potential NULL deref in sample()
  tcp: dont drop MTU reduction indications
  bnx2x: Add new 57840 device IDs
  tcp: avoid oops in tcp_metrics and reset tcpm_stamp
  niu: Change niu_rbr_fill() to use unlikely() to check niu_rbr_add_page() return value
  niu: Fix to check for dma mapping errors.
  net: Fix references to out-of-scope variables in put_cmsg_compat()
  net: ethernet: davinci_emac: add pm_runtime support
  net: ethernet: davinci_emac: Remove unnecessary #include
  ...

8 files changed, 29 insertions, 132 deletions

diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c
index c9d9473a5ab2..5ed654ae66e1 100644
--- a/arch/blackfin/mach-bf537/boards/stamp.c
+++ b/arch/blackfin/mach-bf537/boards/stamp.c
@@ -873,7 +873,7 @@ static struct adf702x_platform_data adf7021_platform_data = {
 };
 static inline void adf702x_mac_init(void)
 {
-	random_ether_addr(adf7021_platform_data.mac_addr);
+	eth_random_addr(adf7021_platform_data.mac_addr);
 }
 #else
 static inline void adf702x_mac_init(void) {}
diff --git a/arch/c6x/kernel/soc.c b/arch/c6x/kernel/soc.c
index 0748c94ebef6..3ac74080fded 100644
--- a/arch/c6x/kernel/soc.c
+++ b/arch/c6x/kernel/soc.c
@@ -80,7 +80,7 @@ int soc_mac_addr(unsigned int index, u8 *addr)
 		if (have_fuse_mac)
 			memcpy(addr, c6x_fuse_mac, 6);
 		else
-			random_ether_addr(addr);
+			eth_random_addr(addr);
 	}
 
 	/* adjust for specific EMAC device */
diff --git a/arch/m68k/include/asm/mcfne.h b/arch/m68k/include/asm/mcf8390.h
index bf638be0958c..a72a20819a54 100644
--- a/arch/m68k/include/asm/mcfne.h
+++ b/arch/m68k/include/asm/mcf8390.h
@@ -1,7 +1,7 @@
 /****************************************************************************/
 
 /*
- *	mcfne.h -- NE2000 in ColdFire eval boards.
+ *	mcf8390.h -- NS8390 support for ColdFire eval boards.
  *
  *	(C) Copyright 1999-2000, Greg Ungerer (gerg@snapgear.com)
  *	(C) Copyright 2000,      Lineo (www.lineo.com)
@@ -14,8 +14,8 @@
  */
 
 /****************************************************************************/
-#ifndef	mcfne_h
-#define	mcfne_h
+#ifndef	mcf8390_h
+#define	mcf8390_h
 /****************************************************************************/
 
 
@@ -37,6 +37,7 @@
 #if defined(CONFIG_ARN5206)
 #define NE2000_ADDR		0x40000300
 #define NE2000_ODDOFFSET	0x00010000
+#define NE2000_ADDRSIZE		0x00020000
 #define	NE2000_IRQ_VECTOR	0xf0
 #define	NE2000_IRQ_PRIORITY	2
 #define	NE2000_IRQ_LEVEL	4
@@ -46,6 +47,7 @@
 #if defined(CONFIG_M5206eC3)
 #define	NE2000_ADDR		0x40000300
 #define	NE2000_ODDOFFSET	0x00010000
+#define	NE2000_ADDRSIZE		0x00020000
 #define	NE2000_IRQ_VECTOR	0x1c
 #define	NE2000_IRQ_PRIORITY	2
 #define	NE2000_IRQ_LEVEL	4
@@ -54,6 +56,7 @@
 
 #if defined(CONFIG_M5206e) && defined(CONFIG_NETtel)
 #define NE2000_ADDR		0x30000300
+#define NE2000_ADDRSIZE		0x00001000
 #define NE2000_IRQ_VECTOR	25
 #define NE2000_IRQ_PRIORITY	1
 #define NE2000_IRQ_LEVEL	3
@@ -63,6 +66,7 @@
 #if defined(CONFIG_M5307C3)
 #define NE2000_ADDR		0x40000300
 #define NE2000_ODDOFFSET	0x00010000
+#define NE2000_ADDRSIZE		0x00020000
 #define NE2000_IRQ_VECTOR	0x1b
 #define	NE2000_BYTE		volatile unsigned short
 #endif
@@ -70,6 +74,7 @@
 #if defined(CONFIG_M5272) && defined(CONFIG_NETtel)
 #define NE2000_ADDR		0x30600300
 #define NE2000_ODDOFFSET	0x00008000
+#define NE2000_ADDRSIZE		0x00010000
 #define NE2000_IRQ_VECTOR	67
 #undef	BSWAP
 #define	BSWAP(w)		(w)
@@ -82,6 +87,7 @@
 #define NE2000_ADDR0		0x30600300
 #define NE2000_ADDR1		0x30800300
 #define NE2000_ODDOFFSET	0x00008000
+#define NE2000_ADDRSIZE		0x00010000
 #define NE2000_IRQ_VECTOR0	27
 #define NE2000_IRQ_VECTOR1	29
 #undef	BSWAP
@@ -94,6 +100,7 @@
 #if defined(CONFIG_M5307) && defined(CONFIG_SECUREEDGEMP3)
 #define NE2000_ADDR		0x30600300
 #define NE2000_ODDOFFSET	0x00008000
+#define NE2000_ADDRSIZE		0x00010000
 #define NE2000_IRQ_VECTOR	27
 #undef	BSWAP
 #define	BSWAP(w)		(w)
@@ -105,6 +112,7 @@
 #if defined(CONFIG_ARN5307)
 #define NE2000_ADDR		0xfe600300
 #define NE2000_ODDOFFSET	0x00010000
+#define NE2000_ADDRSIZE		0x00020000
 #define NE2000_IRQ_VECTOR	0x1b
 #define NE2000_IRQ_PRIORITY	2
 #define NE2000_IRQ_LEVEL	3
@@ -114,129 +122,10 @@
 #if defined(CONFIG_M5407C3)
 #define NE2000_ADDR		0x40000300
 #define NE2000_ODDOFFSET	0x00010000
+#define NE2000_ADDRSIZE		0x00020000
 #define NE2000_IRQ_VECTOR	0x1b
 #define	NE2000_BYTE		volatile unsigned short
 #endif
 
 /****************************************************************************/
-
-/*
- *	Side-band address space for odd address requires re-mapping
- *	many of the standard ISA access functions.
- */
-#ifdef NE2000_ODDOFFSET
-
-#undef outb
-#undef outb_p
-#undef inb
-#undef inb_p
-#undef outsb
-#undef outsw
-#undef insb
-#undef insw
-
-#define	outb	ne2000_outb
-#define	inb	ne2000_inb
-#define	outb_p	ne2000_outb
-#define	inb_p	ne2000_inb
-#define	outsb	ne2000_outsb
-#define	outsw	ne2000_outsw
-#define	insb	ne2000_insb
-#define	insw	ne2000_insw
-
-
-#ifndef COLDFIRE_NE2000_FUNCS
-
-void ne2000_outb(unsigned int val, unsigned int addr);
-int  ne2000_inb(unsigned int addr);
-void ne2000_insb(unsigned int addr, void *vbuf, int unsigned long len);
-void ne2000_insw(unsigned int addr, void *vbuf, unsigned long len);
-void ne2000_outsb(unsigned int addr, void *vbuf, unsigned long len);
-void ne2000_outsw(unsigned int addr, void *vbuf, unsigned long len);
-
-#else
-
-/*
- *	This macro converts a conventional register address into the
- *	real memory pointer of the mapped NE2000 device.
- *	On most NE2000 implementations on ColdFire boards the chip is
- *	mapped in kinda funny, due to its ISA heritage.
- */
-#define	NE2000_PTR(addr)	((addr&0x1)?(NE2000_ODDOFFSET+addr-1):(addr))
-#define	NE2000_DATA_PTR(addr)	(addr)
-
-
-void ne2000_outb(unsigned int val, unsigned int addr)
-{
-	NE2000_BYTE	*rp;
-
-	rp = (NE2000_BYTE *) NE2000_PTR(addr);
-	*rp = RSWAP(val);
-}
-
-int ne2000_inb(unsigned int addr)
-{
-	NE2000_BYTE	*rp, val;
-
-	rp = (NE2000_BYTE *) NE2000_PTR(addr);
-	val = *rp;
-	return((int) ((NE2000_BYTE) RSWAP(val)));
-}
-
-void ne2000_insb(unsigned int addr, void *vbuf, int unsigned long len)
-{
-	NE2000_BYTE	*rp, val;
-	unsigned char	*buf;
-
-	buf = (unsigned char *) vbuf;
-	rp = (NE2000_BYTE *) NE2000_DATA_PTR(addr);
-	for (; (len > 0); len--) {
-		val = *rp;
-		*buf++ = RSWAP(val);
-	}
-}
-
-void ne2000_insw(unsigned int addr, void *vbuf, unsigned long len)
-{
-	volatile unsigned short	*rp;
-	unsigned short		w, *buf;
-
-	buf = (unsigned short *) vbuf;
-	rp = (volatile unsigned short *) NE2000_DATA_PTR(addr);
-	for (; (len > 0); len--) {
-		w = *rp;
-		*buf++ = BSWAP(w);
-	}
-}
-
-void ne2000_outsb(unsigned int addr, const void *vbuf, unsigned long len)
-{
-	NE2000_BYTE	*rp, val;
-	unsigned char	*buf;
-
-	buf = (unsigned char *) vbuf;
-	rp = (NE2000_BYTE *) NE2000_DATA_PTR(addr);
-	for (; (len > 0); len--) {
-		val = *buf++;
-		*rp = RSWAP(val);
-	}
-}
-
-void ne2000_outsw(unsigned int addr, const void *vbuf, unsigned long len)
-{
-	volatile unsigned short	*rp;
-	unsigned short		w, *buf;
-
-	buf = (unsigned short *) vbuf;
-	rp = (volatile unsigned short *) NE2000_DATA_PTR(addr);
-	for (; (len > 0); len--) {
-		w = *buf++;
-		*rp = BSWAP(w);
-	}
-}
-
-#endif /* COLDFIRE_NE2000_FUNCS */
-#endif /* NE2000_OFFOFFSET */
-
-/****************************************************************************/
-#endif	/* mcfne_h */
+#endif	/* mcf8390_h */
diff --git a/arch/mips/ar7/platform.c b/arch/mips/ar7/platform.c
index 1a24d317e7a3..1bbc24b08685 100644
--- a/arch/mips/ar7/platform.c
+++ b/arch/mips/ar7/platform.c
@@ -310,10 +310,10 @@ static void __init cpmac_get_mac(int instance, unsigned char *dev_addr)
 					&dev_addr[4], &dev_addr[5]) != 6) {
 			pr_warning("cannot parse mac address, "
 					"using random address\n");
-			random_ether_addr(dev_addr);
+			eth_random_addr(dev_addr);
 		}
 	} else
-		random_ether_addr(dev_addr);
+		eth_random_addr(dev_addr);
 }
 
 /*****************************************************************************
diff --git a/arch/mips/powertv/powertv_setup.c b/arch/mips/powertv/powertv_setup.c
index 3933c373a438..820b8480f222 100644
--- a/arch/mips/powertv/powertv_setup.c
+++ b/arch/mips/powertv/powertv_setup.c
@@ -254,7 +254,7 @@ early_param("rfmac", rfmac_param);
  * Generates an Ethernet MAC address that is highly likely to be unique for
  * this particular system on a network with other systems of the same type.
  *
- * The problem we are solving is that, when random_ether_addr() is used to
+ * The problem we are solving is that, when eth_random_addr() is used to
  * generate MAC addresses at startup, there isn't much entropy for the random
  * number generator to use and the addresses it produces are fairly likely to
  * be the same as those of other identical systems on the same local network.
@@ -269,7 +269,7 @@ early_param("rfmac", rfmac_param);
  * Still, this does give us something to work with.
  *
  * The approach we take is:
- * 1.	If we can't get the RF MAC Address, just call random_ether_addr.
+ * 1.	If we can't get the RF MAC Address, just call eth_random_addr.
  * 2.	Use the 24-bit NIC-specific bits of the RF MAC address as the last 24
  *	bits of the new address. This is very likely to be unique, except for
  *	the current box.
@@ -299,7 +299,7 @@ void platform_random_ether_addr(u8 addr[ETH_ALEN])
 	if (!have_rfmac) {
 		pr_warning("rfmac not available on command line; "
 			"generating random MAC address\n");
-		random_ether_addr(addr);
+		eth_random_addr(addr);
 	}
 
 	else {
diff --git a/arch/sparc/net/bpf_jit_comp.c b/arch/sparc/net/bpf_jit_comp.c
index 1a69244e785b..e9073e9501b3 100644
--- a/arch/sparc/net/bpf_jit_comp.c
+++ b/arch/sparc/net/bpf_jit_comp.c
@@ -96,6 +96,7 @@ static void bpf_flush_icache(void *start_, void *end_)
 #define AND		F3(2, 0x01)
 #define ANDCC		F3(2, 0x11)
 #define OR		F3(2, 0x02)
+#define XOR		F3(2, 0x03)
 #define SUB		F3(2, 0x04)
 #define SUBCC		F3(2, 0x14)
 #define MUL		F3(2, 0x0a)	/* umul */
@@ -462,6 +463,9 @@ void bpf_jit_compile(struct sk_filter *fp)
 			case BPF_S_ALU_OR_K:	/* A |= K */
 				emit_alu_K(OR, K);
 				break;
+			case BPF_S_ANC_ALU_XOR_X: /* A ^= X; */
+				emit_alu_X(XOR);
+				break;
 			case BPF_S_ALU_LSH_X:	/* A <<= X */
 				emit_alu_X(SLL);
 				break;
diff --git a/arch/um/drivers/net_kern.c b/arch/um/drivers/net_kern.c
index 0d60c5685c26..458d324f062d 100644
--- a/arch/um/drivers/net_kern.c
+++ b/arch/um/drivers/net_kern.c
@@ -339,7 +339,7 @@ static int setup_etheraddr(char *str, unsigned char *addr, char *name)
 random:
 	printk(KERN_INFO
 	       "Choosing a random ethernet address for device %s\n", name);
-	random_ether_addr(addr);
+	eth_random_addr(addr);
 	return 1;
 }
 
diff --git a/arch/x86/net/bpf_jit_comp.c b/arch/x86/net/bpf_jit_comp.c
index 0597f95b6da6..33643a8bcbbb 100644
--- a/arch/x86/net/bpf_jit_comp.c
+++ b/arch/x86/net/bpf_jit_comp.c
@@ -309,6 +309,10 @@ void bpf_jit_compile(struct sk_filter *fp)
 				else
 					EMIT1_off32(0x0d, K);	/* or imm32,%eax */
 				break;
+			case BPF_S_ANC_ALU_XOR_X: /* A ^= X; */
+				seen |= SEEN_XREG;
+				EMIT2(0x31, 0xd8);		/* xor %ebx,%eax */
+				break;
 			case BPF_S_ALU_LSH_X: /* A <<= X; */
 				seen |= SEEN_XREG;
 				EMIT4(0x89, 0xd9, 0xd3, 0xe0);	/* mov %ebx,%ecx; shl %cl,%eax */