Merge tag 'soc-fixes-6.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC fixes from Arnd Bergmann:
 "These are the expected fixes for the SoC tree. I have let the patches
  pile up a little too long, so this is bigger than I would have liked.

   - Minor build fixes for Broadcom STB and NXP i.MX8M SoCs as well\ as
     TEE firmware

   - Updates to the MAINTAINERS file for the PolarFire SoC

   - Minor DT fixes for Renesas White Hawk and Arm Versatile and Juno
     platforms

   - A fix for a missing dependnecy in the NXP DPIO driver

   - Broadcom BCA fixes to the newly added devicetree files

   - Multiple fixes for Microchip AT91 based SoCs, dealing with
     self-refresh timings and regulator settings in DT

   - Several DT fixes for NXP i.MX platforms, dealing with incorrect
     GPIO settings, extraneous nodes, and a wrong clock setting"

* tag 'soc-fixes-6.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (45 commits)
  soc: fsl: select FSL_GUTS driver for DPIO
  ARM: dts: at91: sama5d2_icp: don't keep vdd_other enabled all the time
  ARM: dts: at91: sama5d27_wlsom1: don't keep ldo2 enabled all the time
  ARM: dts: at91: sama7g5ek: specify proper regulator output ranges
  ARM: dts: at91: sama5d2_icp: specify proper regulator output ranges
  ARM: dts: at91: sama5d27_wlsom1: specify proper regulator output ranges
  ARM: at91: pm: fix DDR recalibration when resuming from backup and self-refresh
  ARM: at91: pm: fix self-refresh for sama7g5
  soc: brcmstb: pm-arm: Fix refcount leak and __iomem leak bugs
  ARM: configs: at91: remove CONFIG_MICROCHIP_PIT64B
  ARM: ixp4xx: fix typos in comments
  arm64: dts: renesas: r8a779g0: Fix HSCIF0 interrupt number
  tee: fix compiler warning in tee_shm_register()
  arm64: dts: freescale: verdin-imx8mp: fix atmel_mxt_ts reset polarity
  arm64: dts: freescale: verdin-imx8mm: fix atmel_mxt_ts reset polarity
  arm64: dts: imx8mp: Fix I2C5 GPIO assignment on i.MX8M Plus DHCOM
  arm64: dts: imx8mm-venice-gw7901: fix port/phy validation
  arm64: dts: verdin-imx8mm: add otg2 pd to usbphy
  soc: imx: gpcv2: Assert reset before ungating clock
  arm64: dts: ls1028a-qds-65bb: don't use in-band autoneg for 2500base-x
  ...

29 files changed, 139 insertions, 110 deletions

diff --git a/arch/arm/boot/dts/arm-realview-eb.dtsi b/arch/arm/boot/dts/arm-realview-eb.dtsi
index 2dfb32bf9d48..fbb2258b451f 100644
--- a/arch/arm/boot/dts/arm-realview-eb.dtsi
+++ b/arch/arm/boot/dts/arm-realview-eb.dtsi
@@ -399,7 +399,7 @@
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0x1000d000 0x1000>;
 			clocks = <&sspclk>, <&pclk>;
-			clock-names = "SSPCLK", "apb_pclk";
+			clock-names = "sspclk", "apb_pclk";
 		};
 
 		wdog: watchdog@10010000 {
diff --git a/arch/arm/boot/dts/arm-realview-pb1176.dts b/arch/arm/boot/dts/arm-realview-pb1176.dts
index 06b8723b09eb..efed325af88d 100644
--- a/arch/arm/boot/dts/arm-realview-pb1176.dts
+++ b/arch/arm/boot/dts/arm-realview-pb1176.dts
@@ -410,7 +410,7 @@
 			interrupt-parent = <&intc_dc1176>;
 			interrupts = <0 17 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&sspclk>, <&pclk>;
-			clock-names = "SSPCLK", "apb_pclk";
+			clock-names = "sspclk", "apb_pclk";
 		};
 
 		pb1176_serial0: serial@1010c000 {
diff --git a/arch/arm/boot/dts/arm-realview-pb11mp.dts b/arch/arm/boot/dts/arm-realview-pb11mp.dts
index 295aef448123..89103d54ecc1 100644
--- a/arch/arm/boot/dts/arm-realview-pb11mp.dts
+++ b/arch/arm/boot/dts/arm-realview-pb11mp.dts
@@ -555,7 +555,7 @@
 			interrupt-parent = <&intc_pb11mp>;
 			interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&sspclk>, <&pclk>;
-			clock-names = "SSPCLK", "apb_pclk";
+			clock-names = "sspclk", "apb_pclk";
 		};
 
 		watchdog@1000f000 {
diff --git a/arch/arm/boot/dts/arm-realview-pbx.dtsi b/arch/arm/boot/dts/arm-realview-pbx.dtsi
index 6f61f968d689..ec1507c5147c 100644
--- a/arch/arm/boot/dts/arm-realview-pbx.dtsi
+++ b/arch/arm/boot/dts/arm-realview-pbx.dtsi
@@ -390,7 +390,7 @@
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0x1000d000 0x1000>;
 			clocks = <&sspclk>, <&pclk>;
-			clock-names = "SSPCLK", "apb_pclk";
+			clock-names = "sspclk", "apb_pclk";
 		};
 
 		wdog0: watchdog@1000f000 {
diff --git a/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi b/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi
index 76b2025c67b4..83bcf9fe0152 100644
--- a/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi
+++ b/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi
@@ -76,8 +76,8 @@
 		regulators {
 			vdd_3v3: VDD_IO {
 				regulator-name = "VDD_IO";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <3700000>;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
 				regulator-initial-mode = <2>;
 				regulator-allowed-modes = <2>, <4>;
 				regulator-always-on;
@@ -95,8 +95,8 @@
 
 			vddio_ddr: VDD_DDR {
 				regulator-name = "VDD_DDR";
-				regulator-min-microvolt = <600000>;
-				regulator-max-microvolt = <1850000>;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
 				regulator-initial-mode = <2>;
 				regulator-allowed-modes = <2>, <4>;
 				regulator-always-on;
@@ -118,8 +118,8 @@
 
 			vdd_core: VDD_CORE {
 				regulator-name = "VDD_CORE";
-				regulator-min-microvolt = <600000>;
-				regulator-max-microvolt = <1850000>;
+				regulator-min-microvolt = <1250000>;
+				regulator-max-microvolt = <1250000>;
 				regulator-initial-mode = <2>;
 				regulator-allowed-modes = <2>, <4>;
 				regulator-always-on;
@@ -160,8 +160,8 @@
 
 			LDO1 {
 				regulator-name = "LDO1";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <3700000>;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
 				regulator-always-on;
 
 				regulator-state-standby {
@@ -175,9 +175,8 @@
 
 			LDO2 {
 				regulator-name = "LDO2";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <3700000>;
-				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
 
 				regulator-state-standby {
 					regulator-on-in-suspend;
diff --git a/arch/arm/boot/dts/at91-sama5d2_icp.dts b/arch/arm/boot/dts/at91-sama5d2_icp.dts
index 6865be8d7787..dd1dec9d4e07 100644
--- a/arch/arm/boot/dts/at91-sama5d2_icp.dts
+++ b/arch/arm/boot/dts/at91-sama5d2_icp.dts
@@ -196,8 +196,8 @@
 			regulators {
 				vdd_io_reg: VDD_IO {
 					regulator-name = "VDD_IO";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <3700000>;
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
 					regulator-initial-mode = <2>;
 					regulator-allowed-modes = <2>, <4>;
 					regulator-always-on;
@@ -215,8 +215,8 @@
 
 				VDD_DDR {
 					regulator-name = "VDD_DDR";
-					regulator-min-microvolt = <600000>;
-					regulator-max-microvolt = <1850000>;
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
 					regulator-initial-mode = <2>;
 					regulator-allowed-modes = <2>, <4>;
 					regulator-always-on;
@@ -234,8 +234,8 @@
 
 				VDD_CORE {
 					regulator-name = "VDD_CORE";
-					regulator-min-microvolt = <600000>;
-					regulator-max-microvolt = <1850000>;
+					regulator-min-microvolt = <1250000>;
+					regulator-max-microvolt = <1250000>;
 					regulator-initial-mode = <2>;
 					regulator-allowed-modes = <2>, <4>;
 					regulator-always-on;
@@ -257,7 +257,6 @@
 					regulator-max-microvolt = <1850000>;
 					regulator-initial-mode = <2>;
 					regulator-allowed-modes = <2>, <4>;
-					regulator-always-on;
 
 					regulator-state-standby {
 						regulator-on-in-suspend;
@@ -272,8 +271,8 @@
 
 				LDO1 {
 					regulator-name = "LDO1";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <3700000>;
+					regulator-min-microvolt = <2500000>;
+					regulator-max-microvolt = <2500000>;
 					regulator-always-on;
 
 					regulator-state-standby {
@@ -287,8 +286,8 @@
 
 				LDO2 {
 					regulator-name = "LDO2";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <3700000>;
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
 					regulator-always-on;
 
 					regulator-state-standby {
diff --git a/arch/arm/boot/dts/at91-sama7g5ek.dts b/arch/arm/boot/dts/at91-sama7g5ek.dts
index de44da2e4aae..3b25c67795dd 100644
--- a/arch/arm/boot/dts/at91-sama7g5ek.dts
+++ b/arch/arm/boot/dts/at91-sama7g5ek.dts
@@ -244,8 +244,8 @@
 			regulators {
 				vdd_3v3: VDD_IO {
 					regulator-name = "VDD_IO";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <3700000>;
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
 					regulator-initial-mode = <2>;
 					regulator-allowed-modes = <2>, <4>;
 					regulator-always-on;
@@ -264,8 +264,8 @@
 
 				vddioddr: VDD_DDR {
 					regulator-name = "VDD_DDR";
-					regulator-min-microvolt = <1300000>;
-					regulator-max-microvolt = <1450000>;
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
 					regulator-initial-mode = <2>;
 					regulator-allowed-modes = <2>, <4>;
 					regulator-always-on;
@@ -285,8 +285,8 @@
 
 				vddcore: VDD_CORE {
 					regulator-name = "VDD_CORE";
-					regulator-min-microvolt = <1100000>;
-					regulator-max-microvolt = <1850000>;
+					regulator-min-microvolt = <1150000>;
+					regulator-max-microvolt = <1150000>;
 					regulator-initial-mode = <2>;
 					regulator-allowed-modes = <2>, <4>;
 					regulator-always-on;
@@ -306,7 +306,7 @@
 				vddcpu: VDD_OTHER {
 					regulator-name = "VDD_OTHER";
 					regulator-min-microvolt = <1050000>;
-					regulator-max-microvolt = <1850000>;
+					regulator-max-microvolt = <1250000>;
 					regulator-initial-mode = <2>;
 					regulator-allowed-modes = <2>, <4>;
 					regulator-ramp-delay = <3125>;
@@ -326,8 +326,8 @@
 
 				vldo1: LDO1 {
 					regulator-name = "LDO1";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <3700000>;
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
 					regulator-always-on;
 
 					regulator-state-standby {
diff --git a/arch/arm/boot/dts/bcm63178.dtsi b/arch/arm/boot/dts/bcm63178.dtsi
index 5463443f0762..cbd094dde6d0 100644
--- a/arch/arm/boot/dts/bcm63178.dtsi
+++ b/arch/arm/boot/dts/bcm63178.dtsi
@@ -32,6 +32,7 @@
 			next-level-cache = <&L2_0>;
 			enable-method = "psci";
 		};
+
 		CA7_2: cpu@2 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a7";
@@ -39,6 +40,7 @@
 			next-level-cache = <&L2_0>;
 			enable-method = "psci";
 		};
+
 		L2_0: l2-cache0 {
 			compatible = "cache";
 		};
@@ -46,10 +48,10 @@
 
 	timer {
 		compatible = "arm,armv7-timer";
-		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>;
 		arm,cpu-registers-not-fw-configured;
 	};
 
@@ -80,23 +82,23 @@
 	psci {
 		compatible = "arm,psci-0.2";
 		method = "smc";
-		cpu_off = <1>;
-		cpu_on = <2>;
 	};
 
 	axi@81000000 {
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
-		ranges = <0 0x81000000 0x4000>;
+		ranges = <0 0x81000000 0x8000>;
 
 		gic: interrupt-controller@1000 {
 			compatible = "arm,cortex-a7-gic";
 			#interrupt-cells = <3>;
-			#address-cells = <0>;
 			interrupt-controller;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_HIGH)>;
 			reg = <0x1000 0x1000>,
-				<0x2000 0x2000>;
+				<0x2000 0x2000>,
+				<0x4000 0x2000>,
+				<0x6000 0x2000>;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/bcm6846.dtsi b/arch/arm/boot/dts/bcm6846.dtsi
index e610c102498f..8aa47a2583b2 100644
--- a/arch/arm/boot/dts/bcm6846.dtsi
+++ b/arch/arm/boot/dts/bcm6846.dtsi
@@ -40,10 +40,10 @@
 
 	timer {
 		compatible = "arm,armv7-timer";
-		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
 		arm,cpu-registers-not-fw-configured;
 	};
 
@@ -65,23 +65,23 @@
 	psci {
 		compatible = "arm,psci-0.2";
 		method = "smc";
-		cpu_off = <1>;
-		cpu_on = <2>;
 	};
 
 	axi@81000000 {
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
-		ranges = <0 0x81000000 0x4000>;
+		ranges = <0 0x81000000 0x8000>;
 
 		gic: interrupt-controller@1000 {
 			compatible = "arm,cortex-a7-gic";
 			#interrupt-cells = <3>;
-			#address-cells = <0>;
 			interrupt-controller;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
 			reg = <0x1000 0x1000>,
-				<0x2000 0x2000>;
+				<0x2000 0x2000>,
+				<0x4000 0x2000>,
+				<0x6000 0x2000>;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/bcm6878.dtsi b/arch/arm/boot/dts/bcm6878.dtsi
index a7dff596fe1e..1e8b5fa96c25 100644
--- a/arch/arm/boot/dts/bcm6878.dtsi
+++ b/arch/arm/boot/dts/bcm6878.dtsi
@@ -32,6 +32,7 @@
 			next-level-cache = <&L2_0>;
 			enable-method = "psci";
 		};
+
 		L2_0: l2-cache0 {
 			compatible = "cache";
 		};
@@ -39,10 +40,10 @@
 
 	timer {
 		compatible = "arm,armv7-timer";
-		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
 		arm,cpu-registers-not-fw-configured;
 	};
 
diff --git a/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi b/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi
index 095c9143d99a..6b791d515e29 100644
--- a/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi
@@ -51,16 +51,6 @@
 		vin-supply = <&reg_3p3v_s5>;
 	};
 
-	reg_3p3v_s0: regulator-3p3v-s0 {
-		compatible = "regulator-fixed";
-		regulator-name = "V_3V3_S0";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-		regulator-boot-on;
-		vin-supply = <&reg_3p3v_s5>;
-	};
-
 	reg_3p3v_s5: regulator-3p3v-s5 {
 		compatible = "regulator-fixed";
 		regulator-name = "V_3V3_S5";
@@ -259,7 +249,7 @@
 
 	/* default boot source: workaround #1 for errata ERR006282 */
 	smarc_flash: flash@0 {
-		compatible = "winbond,w25q16dw", "jedec,spi-nor";
+		compatible = "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <20000000>;
 	};
diff --git a/arch/arm/boot/dts/imx6qdl-vicut1.dtsi b/arch/arm/boot/dts/imx6qdl-vicut1.dtsi
index a1676b5d2980..c5a98b0110dd 100644
--- a/arch/arm/boot/dts/imx6qdl-vicut1.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-vicut1.dtsi
@@ -28,7 +28,7 @@
 		enable-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
 	};
 
-	backlight_led: backlight_led {
+	backlight_led: backlight-led {
 		compatible = "pwm-backlight";
 		pwms = <&pwm3 0 5000000 0>;
 		brightness-levels = <0 16 64 255>;
diff --git a/arch/arm/boot/dts/integratorap-im-pd1.dts b/arch/arm/boot/dts/integratorap-im-pd1.dts
index d47bfb66d069..4c22e4436271 100644
--- a/arch/arm/boot/dts/integratorap-im-pd1.dts
+++ b/arch/arm/boot/dts/integratorap-im-pd1.dts
@@ -178,12 +178,12 @@
 		clock-names = "uartclk", "apb_pclk";
 	};
 
-	ssp@300000 {
+	spi@300000 {
 		compatible = "arm,pl022", "arm,primecell";
 		reg = <0x00300000 0x1000>;
 		interrupts-extended = <&impd1_vic 3>;
 		clocks = <&impd1_sspclk>, <&sysclk>;
-		clock-names = "spiclk", "apb_pclk";
+		clock-names = "sspclk", "apb_pclk";
 	};
 
 	impd1_gpio0: gpio@400000 {
diff --git a/arch/arm/boot/dts/versatile-ab.dts b/arch/arm/boot/dts/versatile-ab.dts
index 79f7cc241282..a520615f4d8d 100644
--- a/arch/arm/boot/dts/versatile-ab.dts
+++ b/arch/arm/boot/dts/versatile-ab.dts
@@ -391,7 +391,7 @@
 			reg = <0x101f4000 0x1000>;
 			interrupts = <11>;
 			clocks = <&xtal24mhz>, <&pclk>;
-			clock-names = "SSPCLK", "apb_pclk";
+			clock-names = "sspclk", "apb_pclk";
 		};
 
 		fpga {
diff --git a/arch/arm/configs/at91_dt_defconfig b/arch/arm/configs/at91_dt_defconfig
index da90ce9cd42e..e185eee18856 100644
--- a/arch/arm/configs/at91_dt_defconfig
+++ b/arch/arm/configs/at91_dt_defconfig
@@ -196,7 +196,6 @@ CONFIG_RTC_DRV_AT91SAM9=y
 CONFIG_DMADEVICES=y
 CONFIG_AT_HDMAC=y
 CONFIG_AT_XDMAC=y
-CONFIG_MICROCHIP_PIT64B=y
 # CONFIG_IOMMU_SUPPORT is not set
 CONFIG_IIO=y
 CONFIG_AT91_ADC=y
diff --git a/arch/arm/configs/sama7_defconfig b/arch/arm/configs/sama7_defconfig
index 0384030d8b25..b2311f004618 100644
--- a/arch/arm/configs/sama7_defconfig
+++ b/arch/arm/configs/sama7_defconfig
@@ -188,7 +188,6 @@ CONFIG_RTC_DRV_AT91SAM9=y
 CONFIG_DMADEVICES=y
 CONFIG_AT_XDMAC=y
 CONFIG_STAGING=y
-CONFIG_MICROCHIP_PIT64B=y
 # CONFIG_IOMMU_SUPPORT is not set
 CONFIG_IIO=y
 CONFIG_IIO_SW_TRIGGER=y
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index df6d673e83d5..f4501dea98b0 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -541,10 +541,42 @@ extern u32 at91_pm_suspend_in_sram_sz;
 
 static int at91_suspend_finish(unsigned long val)
 {
+	unsigned char modified_gray_code[] = {
+		0x00, 0x01, 0x02, 0x03, 0x06, 0x07, 0x04, 0x05, 0x0c, 0x0d,
+		0x0e, 0x0f, 0x0a, 0x0b, 0x08, 0x09, 0x18, 0x19, 0x1a, 0x1b,
+		0x1e, 0x1f, 0x1c, 0x1d, 0x14, 0x15, 0x16, 0x17, 0x12, 0x13,
+		0x10, 0x11,
+	};
+	unsigned int tmp, index;
 	int i;
 
 	if (soc_pm.data.mode == AT91_PM_BACKUP && soc_pm.data.ramc_phy) {
 		/*
+		 * Bootloader will perform DDR recalibration and will try to
+		 * restore the ZQ0SR0 with the value saved here. But the
+		 * calibration is buggy and restoring some values from ZQ0SR0
+		 * is forbidden and risky thus we need to provide processed
+		 * values for these (modified gray code values).
+		 */
+		tmp = readl(soc_pm.data.ramc_phy + DDR3PHY_ZQ0SR0);
+
+		/* Store pull-down output impedance select. */
+		index = (tmp >> DDR3PHY_ZQ0SR0_PDO_OFF) & 0x1f;
+		soc_pm.bu->ddr_phy_calibration[0] = modified_gray_code[index];
+
+		/* Store pull-up output impedance select. */
+		index = (tmp >> DDR3PHY_ZQ0SR0_PUO_OFF) & 0x1f;
+		soc_pm.bu->ddr_phy_calibration[0] |= modified_gray_code[index];
+
+		/* Store pull-down on-die termination impedance select. */
+		index = (tmp >> DDR3PHY_ZQ0SR0_PDODT_OFF) & 0x1f;
+		soc_pm.bu->ddr_phy_calibration[0] |= modified_gray_code[index];
+
+		/* Store pull-up on-die termination impedance select. */
+		index = (tmp >> DDR3PHY_ZQ0SRO_PUODT_OFF) & 0x1f;
+		soc_pm.bu->ddr_phy_calibration[0] |= modified_gray_code[index];
+
+		/*
 		 * The 1st 8 words of memory might get corrupted in the process
 		 * of DDR PHY recalibration; it is saved here in securam and it
 		 * will be restored later, after recalibration, by bootloader
@@ -1066,10 +1098,6 @@ static int __init at91_pm_backup_init(void)
 		of_scan_flat_dt(at91_pm_backup_scan_memcs, &located);
 		if (!located)
 			goto securam_fail;
-
-		/* DDR3PHY_ZQ0SR0 */
-		soc_pm.bu->ddr_phy_calibration[0] = readl(soc_pm.data.ramc_phy +
-							  0x188);
 	}
 
 	return 0;
diff --git a/arch/arm/mach-at91/pm_suspend.S b/arch/arm/mach-at91/pm_suspend.S
index abe4ced33eda..ffed4d949042 100644
--- a/arch/arm/mach-at91/pm_suspend.S
+++ b/arch/arm/mach-at91/pm_suspend.S
@@ -172,9 +172,15 @@ sr_ena_2:
 	/* Put DDR PHY's DLL in bypass mode for non-backup modes. */
 	cmp	r7, #AT91_PM_BACKUP
 	beq	sr_ena_3
-	ldr	tmp1, [r3, #DDR3PHY_PIR]
-	orr	tmp1, tmp1, #DDR3PHY_PIR_DLLBYP
-	str	tmp1, [r3, #DDR3PHY_PIR]
+
+	/* Disable DX DLLs. */
+	ldr	tmp1, [r3, #DDR3PHY_DX0DLLCR]
+	orr	tmp1, tmp1, #DDR3PHY_DXDLLCR_DLLDIS
+	str	tmp1, [r3, #DDR3PHY_DX0DLLCR]
+
+	ldr	tmp1, [r3, #DDR3PHY_DX1DLLCR]
+	orr	tmp1, tmp1, #DDR3PHY_DXDLLCR_DLLDIS
+	str	tmp1, [r3, #DDR3PHY_DX1DLLCR]
 
 sr_ena_3:
 	/* Power down DDR PHY data receivers. */
@@ -221,10 +227,14 @@ sr_ena_3:
 	bic	tmp1, tmp1, #DDR3PHY_DSGCR_ODTPDD_ODT0
 	str	tmp1, [r3, #DDR3PHY_DSGCR]
 
-	/* Take DDR PHY's DLL out of bypass mode. */
-	ldr	tmp1, [r3, #DDR3PHY_PIR]
-	bic	tmp1, tmp1, #DDR3PHY_PIR_DLLBYP
-	str	tmp1, [r3, #DDR3PHY_PIR]
+	/* Enable DX DLLs. */
+	ldr	tmp1, [r3, #DDR3PHY_DX0DLLCR]
+	bic	tmp1, tmp1, #DDR3PHY_DXDLLCR_DLLDIS
+	str	tmp1, [r3, #DDR3PHY_DX0DLLCR]
+
+	ldr	tmp1, [r3, #DDR3PHY_DX1DLLCR]
+	bic	tmp1, tmp1, #DDR3PHY_DXDLLCR_DLLDIS
+	str	tmp1, [r3, #DDR3PHY_DX1DLLCR]
 
 	/* Enable quasi-dynamic programming. */
 	mov	tmp1, #0
diff --git a/arch/arm/mach-ixp4xx/ixp4xx-of.c b/arch/arm/mach-ixp4xx/ixp4xx-of.c
index f9904716ec7f..f543e2adae0c 100644
--- a/arch/arm/mach-ixp4xx/ixp4xx-of.c
+++ b/arch/arm/mach-ixp4xx/ixp4xx-of.c
@@ -46,7 +46,7 @@ static void __init ixp4xx_of_map_io(void)
 }
 
 /*
- * We handle 4 differen SoC families. These compatible strings are enough
+ * We handle 4 different SoC families. These compatible strings are enough
  * to provide the core so that different boards can add their more detailed
  * specifics.
  */
diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi
index 8d0d45d168d1..2f27619d8abd 100644
--- a/arch/arm64/boot/dts/arm/juno-base.dtsi
+++ b/arch/arm64/boot/dts/arm/juno-base.dtsi
@@ -26,7 +26,8 @@
 		compatible = "arm,mhu", "arm,primecell";
 		reg = <0x0 0x2b1f0000 0x0 0x1000>;
 		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			     <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
 		#mbox-cells = <1>;
 		clocks = <&soc_refclk100mhz>;
 		clock-names = "apb_pclk";
diff --git a/arch/arm64/boot/dts/arm/juno-cs-r1r2.dtsi b/arch/arm64/boot/dts/arm/juno-cs-r1r2.dtsi
index ba88d1596f6f..09d2b692e9e1 100644
--- a/arch/arm64/boot/dts/arm/juno-cs-r1r2.dtsi
+++ b/arch/arm64/boot/dts/arm/juno-cs-r1r2.dtsi
@@ -67,7 +67,6 @@
 			port@0 {
 				reg = <0>;
 				csys2_funnel_in_port0: endpoint {
-					slave-mode;
 					remote-endpoint = <&etf0_out_port>;
 				};
 			};
@@ -75,7 +74,6 @@
 			port@1 {
 				reg = <1>;
 				csys2_funnel_in_port1: endpoint {
-					slave-mode;
 					remote-endpoint = <&etf1_out_port>;
 				};
 			};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-65bb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-65bb.dts
index 40d34c8384a5..b949cac03742 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-65bb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-65bb.dts
@@ -25,7 +25,6 @@
 &enetc_port0 {
 	phy-handle = <&slot1_sgmii>;
 	phy-mode = "2500base-x";
-	managed = "in-band-status";
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts
index 35fb929e7bcc..d3ee6fc4baab 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts
@@ -626,24 +626,28 @@
 			lan1: port@0 {
 				reg = <0>;
 				label = "lan1";
+				phy-mode = "internal";
 				local-mac-address = [00 00 00 00 00 00];
 			};
 
 			lan2: port@1 {
 				reg = <1>;
 				label = "lan2";
+				phy-mode = "internal";
 				local-mac-address = [00 00 00 00 00 00];
 			};
 
 			lan3: port@2 {
 				reg = <2>;
 				label = "lan3";
+				phy-mode = "internal";
 				local-mac-address = [00 00 00 00 00 00];
 			};
 
 			lan4: port@3 {
 				reg = <3>;
 				label = "lan4";
+				phy-mode = "internal";
 				local-mac-address = [00 00 00 00 00 00];
 			};
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
index d1b4582f44c4..b379c461aa13 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
@@ -32,10 +32,10 @@
 	};
 
 	/* Fixed clock dedicated to SPI CAN controller */
-	clk20m: oscillator {
+	clk40m: oscillator {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
-		clock-frequency = <20000000>;
+		clock-frequency = <40000000>;
 	};
 
 	gpio-keys {
@@ -202,8 +202,8 @@
 
 	can1: can@0 {
 		compatible = "microchip,mcp251xfd";
-		clocks = <&clk20m>;
-		interrupts-extended = <&gpio1 6 IRQ_TYPE_EDGE_FALLING>;
+		clocks = <&clk40m>;
+		interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_LOW>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_can1_int>;
 		reg = <0>;
@@ -603,7 +603,7 @@
 		pinctrl-0 = <&pinctrl_gpio_9_dsi>, <&pinctrl_i2s_2_bclk_touch_reset>;
 		reg = <0x4a>;
 		/* Verdin I2S_2_BCLK (TOUCH_RESET#, SODIMM 42) */
-		reset-gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
 		status = "disabled";
 	};
 
@@ -745,6 +745,7 @@
 };
 
 &usbphynop2 {
+	power-domains = <&pgc_otg2>;
 	vcc-supply = <&reg_vdd_3v3>;
 };
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi
index a616eb378002..0f13ee362771 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi
@@ -70,7 +70,7 @@
 &ecspi1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi1>;
-	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+	cs-gpios = <&gpio5 17 GPIO_ACTIVE_LOW>;
 	status = "disabled";
 };
 
@@ -403,8 +403,8 @@
 	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c5>;
 	pinctrl-1 = <&pinctrl_i2c5_gpio>;
-	scl-gpios = <&gpio5 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	sda-gpios = <&gpio5 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	scl-gpios = <&gpio3 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio3 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 };
 
@@ -648,10 +648,10 @@
 
 	pinctrl_ecspi1: dhcom-ecspi1-grp {
 		fsl,pins = <
-			MX8MP_IOMUXC_ECSPI1_SCLK__ECSPI1_SCLK		0x44
-			MX8MP_IOMUXC_ECSPI1_MOSI__ECSPI1_MOSI		0x44
-			MX8MP_IOMUXC_ECSPI1_MISO__ECSPI1_MISO		0x44
-			MX8MP_IOMUXC_ECSPI1_SS0__GPIO5_IO09		0x40
+			MX8MP_IOMUXC_I2C1_SCL__ECSPI1_SCLK		0x44
+			MX8MP_IOMUXC_I2C1_SDA__ECSPI1_MOSI		0x44
+			MX8MP_IOMUXC_I2C2_SCL__ECSPI1_MISO		0x44
+			MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17		0x40
 		>;
 	};
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts
index 521215520a0f..6630ec561dc2 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts
@@ -770,10 +770,10 @@
 
 	pinctrl_sai2: sai2grp {
 		fsl,pins = <
-			MX8MP_IOMUXC_SAI2_TXFS__AUDIOMIX_SAI2_TX_SYNC
-			MX8MP_IOMUXC_SAI2_TXD0__AUDIOMIX_SAI2_TX_DATA00
-			MX8MP_IOMUXC_SAI2_TXC__AUDIOMIX_SAI2_TX_BCLK
-			MX8MP_IOMUXC_SAI2_MCLK__AUDIOMIX_SAI2_MCLK
+			MX8MP_IOMUXC_SAI2_TXFS__AUDIOMIX_SAI2_TX_SYNC	0xd6
+			MX8MP_IOMUXC_SAI2_TXD0__AUDIOMIX_SAI2_TX_DATA00	0xd6
+			MX8MP_IOMUXC_SAI2_TXC__AUDIOMIX_SAI2_TX_BCLK	0xd6
+			MX8MP_IOMUXC_SAI2_MCLK__AUDIOMIX_SAI2_MCLK	0xd6
 		>;
 	};
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
index c5987bdbb383..1c74c6a19449 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
@@ -628,7 +628,7 @@
 		interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
 		reg = <0x4a>;
 		/* Verdin GPIO_2 (SODIMM 208) */
-		reset-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
 		status = "disabled";
 	};
 };
@@ -705,7 +705,7 @@
 		pinctrl-0 = <&pinctrl_gpio_9_dsi>, <&pinctrl_i2s_2_bclk_touch_reset>;
 		reg = <0x4a>;
 		/* Verdin I2S_2_BCLK (TOUCH_RESET#, SODIMM 42) */
-		reset-gpios = <&gpio5 0 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
 		status = "disabled";
 	};
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq.dtsi
index 899e8e7dbc24..802ad6e5cef6 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq.dtsi
@@ -204,7 +204,6 @@
 		reg = <0x51>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_rtc>;
-		interrupt-names = "irq";
 		interrupt-parent = <&gpio1>;
 		interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
 		quartz-load-femtofarads = <7000>;
diff --git a/arch/arm64/boot/dts/renesas/r8a779g0.dtsi b/arch/arm64/boot/dts/renesas/r8a779g0.dtsi
index 7cbb0de060dd..1c15726cff8b 100644
--- a/arch/arm64/boot/dts/renesas/r8a779g0.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a779g0.dtsi
@@ -85,7 +85,7 @@
 				     "renesas,rcar-gen4-hscif",
 				     "renesas,hscif";
 			reg = <0 0xe6540000 0 96>;
-			interrupts = <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 514>,
 				 <&cpg CPG_CORE R8A779G0_CLK_S0D3_PER>,
 				 <&scif_clk>;