aboutsummaryrefslogtreecommitdiffstats
path: root/arch
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2020-10-30 13:06:07 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2020-10-30 13:06:07 -0700
commit65b55d4c85e59e0cc946c1ac171ff59bc6e1d7f9 (patch)
tree77b79516e6ea76f800afa299c23f5d02e47663ac /arch
parentMerge tag 'pnp-5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm (diff)
parentsoc: ti: ti_sci_pm_domains: check for proper args count in xlate (diff)
downloadlinux-dev-65b55d4c85e59e0cc946c1ac171ff59bc6e1d7f9.tar.xz
linux-dev-65b55d4c85e59e0cc946c1ac171ff59bc6e1d7f9.zip
Merge tag 'arm-soc-fixes-v5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann: "This is a fairly large set of bug fixes on top of -rc1, as most of them were ready but didn't quite make it into the last-minute pull requests for the merge window. Allwinner: - fix for incorrect CPU overtemperature limit Amlogic: - multiple smaller DT bugfixes, and missing device nodes Marvell EBU: - add missing aliases for ethernet switch ports on espressobin board Marvell MMP: - DTC warning fix - bugfix for camera interface power-down NXP i.MX: - re-enable the GPIO driver on all defconfigs ST STM32MP1: - fix random crashes from incorrect voltage settings Synaptics Berlin: - enable the correct hardware timer driver Texas Instruments K2G: - fix a boot regression in the power domain code TEE drivers: - fix regression in TEE "login" method SCMI drivers: - multiple code fixes for corner cases in newly added code MAINTAINERS file: - move Kukjin Kim and Sangbeom Kim to credits (used to work on Samsung Exynos) - Masahiro Yamada is stepping down as Uniphier maintainer I did not include a series of patches that work around a regression caused by a bugfix in an ethernet phy driver that resulted in an inadvertent DT binding change. This is still under discussion" * tag 'arm-soc-fixes-v5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (31 commits) soc: ti: ti_sci_pm_domains: check for proper args count in xlate ARM: dts: stm32: Describe Vin power supply on stm32mp157c-edx board ARM: dts: stm32: Describe Vin power supply on stm32mp15xx-dkx board ARM: multi_v5_defconfig: Select CONFIG_GPIO_MXC ARM: imx_v4_v5_defconfig: Select CONFIG_GPIO_MXC ARM: dts: mmp2-olpc-xo-1-75: Use plural form of "-gpios" ARM: dts: mmp3: Add power domain for the camera arm64: berlin: Select DW_APB_TIMER_OF dt-bindings: sram: sunxi-sram: add V3s compatible string MAINTAINERS: Move Sangbeom Kim to credits MAINTAINERS: Move Kukjin Kim to credits MAINTAINERS: step down as maintainer of UniPhier SoCs and Denali driver ARM: multi_v7_defconfig: Build in CONFIG_GPIO_MXC by default ARM: imx_v6_v7_defconfig: Build in CONFIG_GPIO_MXC by default arm64: defconfig: Build in CONFIG_GPIO_MXC by default arm64: dts: meson: odroid-n2 plus: fix vddcpu_a pwm ARM: dts: meson8: remove two invalid interrupt lines from the GPU node arm64: dts: amlogic: add missing ethernet reset ID firmware: arm_scmi: Fix duplicate workqueue name firmware: arm_scmi: Fix locking in notifications ...
Diffstat (limited to 'arch')
-rw-r--r--arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts4
-rw-r--r--arch/arm/boot/dts/mmp3.dtsi2
-rw-r--r--arch/arm/boot/dts/stm32mp157c-ed1.dts15
-rw-r--r--arch/arm/boot/dts/stm32mp15xx-dkx.dtsi17
-rw-r--r--arch/arm/boot/dts/sun4i-a10.dtsi2
-rw-r--r--arch/arm/configs/imx_v4_v5_defconfig1
-rw-r--r--arch/arm/configs/imx_v6_v7_defconfig1
-rw-r--r--arch/arm/configs/multi_v5_defconfig1
-rw-r--r--arch/arm/configs/multi_v7_defconfig1
-rw-r--r--arch/arm/mach-mvebu/coherency_ll.S7
-rw-r--r--arch/arm64/Kconfig.platforms1
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-axg-s400.dts6
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-axg.dtsi52
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi6
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2-plus.dts2
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-gx.dtsi3
-rw-r--r--arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts10
-rw-r--r--arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts10
-rw-r--r--arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi12
-rw-r--r--arch/arm64/configs/defconfig1
20 files changed, 135 insertions, 19 deletions
diff --git a/arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts b/arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts
index f1a41152e9dd..adde62d6fce7 100644
--- a/arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts
+++ b/arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts
@@ -227,12 +227,12 @@
/delete-property/ #size-cells;
spi-slave;
status = "okay";
- ready-gpio = <&gpio 125 GPIO_ACTIVE_HIGH>;
+ ready-gpios = <&gpio 125 GPIO_ACTIVE_HIGH>;
slave {
compatible = "olpc,xo1.75-ec";
spi-cpha;
- cmd-gpio = <&gpio 155 GPIO_ACTIVE_HIGH>;
+ cmd-gpios = <&gpio 155 GPIO_ACTIVE_HIGH>;
};
};
diff --git a/arch/arm/boot/dts/mmp3.dtsi b/arch/arm/boot/dts/mmp3.dtsi
index cc4efd0efabd..4ae630d37d09 100644
--- a/arch/arm/boot/dts/mmp3.dtsi
+++ b/arch/arm/boot/dts/mmp3.dtsi
@@ -296,6 +296,7 @@
interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&soc_clocks MMP2_CLK_CCIC0>;
clock-names = "axi";
+ power-domains = <&soc_clocks MMP3_POWER_DOMAIN_CAMERA>;
#clock-cells = <0>;
clock-output-names = "mclk";
status = "disabled";
@@ -307,6 +308,7 @@
interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&soc_clocks MMP2_CLK_CCIC1>;
clock-names = "axi";
+ power-domains = <&soc_clocks MMP3_POWER_DOMAIN_CAMERA>;
#clock-cells = <0>;
clock-output-names = "mclk";
status = "disabled";
diff --git a/arch/arm/boot/dts/stm32mp157c-ed1.dts b/arch/arm/boot/dts/stm32mp157c-ed1.dts
index ca109dc18238..2e77ccec3fc1 100644
--- a/arch/arm/boot/dts/stm32mp157c-ed1.dts
+++ b/arch/arm/boot/dts/stm32mp157c-ed1.dts
@@ -89,6 +89,14 @@
states = <1800000 0x1>,
<2900000 0x0>;
};
+
+ vin: vin {
+ compatible = "regulator-fixed";
+ regulator-name = "vin";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
};
&adc {
@@ -150,11 +158,18 @@
regulators {
compatible = "st,stpmic1-regulators";
+ buck1-supply = <&vin>;
+ buck2-supply = <&vin>;
+ buck3-supply = <&vin>;
+ buck4-supply = <&vin>;
ldo1-supply = <&v3v3>;
ldo2-supply = <&v3v3>;
ldo3-supply = <&vdd_ddr>;
+ ldo4-supply = <&vin>;
ldo5-supply = <&v3v3>;
ldo6-supply = <&v3v3>;
+ vref_ddr-supply = <&vin>;
+ boost-supply = <&vin>;
pwr_sw1-supply = <&bst_out>;
pwr_sw2-supply = <&bst_out>;
diff --git a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi
index a5307745719a..93398cfae97e 100644
--- a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi
+++ b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi
@@ -80,6 +80,14 @@
dais = <&sai2a_port &sai2b_port &i2s2_port>;
status = "okay";
};
+
+ vin: vin {
+ compatible = "regulator-fixed";
+ regulator-name = "vin";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
};
&adc {
@@ -240,9 +248,18 @@
regulators {
compatible = "st,stpmic1-regulators";
+ buck1-supply = <&vin>;
+ buck2-supply = <&vin>;
+ buck3-supply = <&vin>;
+ buck4-supply = <&vin>;
ldo1-supply = <&v3v3>;
+ ldo2-supply = <&vin>;
ldo3-supply = <&vdd_ddr>;
+ ldo4-supply = <&vin>;
+ ldo5-supply = <&vin>;
ldo6-supply = <&v3v3>;
+ vref_ddr-supply = <&vin>;
+ boost-supply = <&vin>;
pwr_sw1-supply = <&bst_out>;
pwr_sw2-supply = <&bst_out>;
diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
index 0f95a6ef8543..1c5a666c54b5 100644
--- a/arch/arm/boot/dts/sun4i-a10.dtsi
+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
@@ -143,7 +143,7 @@
trips {
cpu_alert0: cpu-alert0 {
/* milliCelsius */
- temperature = <850000>;
+ temperature = <85000>;
hysteresis = <2000>;
type = "passive";
};
diff --git a/arch/arm/configs/imx_v4_v5_defconfig b/arch/arm/configs/imx_v4_v5_defconfig
index aeb1209e0804..bb70acc6b526 100644
--- a/arch/arm/configs/imx_v4_v5_defconfig
+++ b/arch/arm/configs/imx_v4_v5_defconfig
@@ -93,6 +93,7 @@ CONFIG_SPI=y
CONFIG_SPI_IMX=y
CONFIG_SPI_SPIDEV=y
CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_MXC=y
CONFIG_W1=y
CONFIG_W1_MASTER_MXC=y
CONFIG_W1_SLAVE_THERM=y
diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index 0fa79bd00219..221f5c340c86 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -217,6 +217,7 @@ CONFIG_GPIO_PCA953X=y
CONFIG_GPIO_PCF857X=y
CONFIG_GPIO_STMPE=y
CONFIG_GPIO_74X164=y
+CONFIG_GPIO_MXC=y
CONFIG_POWER_RESET=y
CONFIG_POWER_RESET_SYSCON=y
CONFIG_POWER_RESET_SYSCON_POWEROFF=y
diff --git a/arch/arm/configs/multi_v5_defconfig b/arch/arm/configs/multi_v5_defconfig
index 70b709a669d2..e00be9faa23b 100644
--- a/arch/arm/configs/multi_v5_defconfig
+++ b/arch/arm/configs/multi_v5_defconfig
@@ -166,6 +166,7 @@ CONFIG_SPI_IMX=y
CONFIG_SPI_ORION=y
CONFIG_GPIO_ASPEED=m
CONFIG_GPIO_ASPEED_SGPIO=y
+CONFIG_GPIO_MXC=y
CONFIG_POWER_RESET=y
CONFIG_POWER_RESET_GPIO=y
CONFIG_POWER_RESET_QNAP=y
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index e731cdf7c88c..a611b0c1e540 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -465,6 +465,7 @@ CONFIG_GPIO_PALMAS=y
CONFIG_GPIO_TPS6586X=y
CONFIG_GPIO_TPS65910=y
CONFIG_GPIO_TWL4030=y
+CONFIG_GPIO_MXC=y
CONFIG_POWER_AVS=y
CONFIG_ROCKCHIP_IODOMAIN=y
CONFIG_POWER_RESET_AS3722=y
diff --git a/arch/arm/mach-mvebu/coherency_ll.S b/arch/arm/mach-mvebu/coherency_ll.S
index 2d962fe48821..a3a64bf97250 100644
--- a/arch/arm/mach-mvebu/coherency_ll.S
+++ b/arch/arm/mach-mvebu/coherency_ll.S
@@ -35,13 +35,8 @@ ENTRY(ll_get_coherency_base)
/*
* MMU is disabled, use the physical address of the coherency
- * base address. However, if the coherency fabric isn't mapped
- * (i.e its virtual address is zero), it means coherency is
- * not enabled, so we return 0.
+ * base address, (or 0x0 if the coherency fabric is not mapped)
*/
- ldr r1, =coherency_base
- cmp r1, #0
- beq 2f
adr r1, 3f
ldr r3, [r1]
ldr r1, [r1, r3]
diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
index 6f2494dd6d60..5c4ac1c9f4e0 100644
--- a/arch/arm64/Kconfig.platforms
+++ b/arch/arm64/Kconfig.platforms
@@ -54,6 +54,7 @@ config ARCH_BCM_IPROC
config ARCH_BERLIN
bool "Marvell Berlin SoC Family"
select DW_APB_ICTL
+ select DW_APB_TIMER_OF
select GPIOLIB
select PINCTRL
help
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
index cb1360ae1211..7740f97c240f 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
@@ -584,3 +584,9 @@
pinctrl-0 = <&uart_ao_a_pins>;
pinctrl-names = "default";
};
+
+&usb {
+ status = "okay";
+ dr_mode = "otg";
+ vbus-supply = <&usb_pwr>;
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
index b9efc8469265..724ee179b316 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
@@ -171,6 +171,46 @@
#size-cells = <2>;
ranges;
+ usb: usb@ffe09080 {
+ compatible = "amlogic,meson-axg-usb-ctrl";
+ reg = <0x0 0xffe09080 0x0 0x20>;
+ interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB1_DDR_BRIDGE>;
+ clock-names = "usb_ctrl", "ddr";
+ resets = <&reset RESET_USB_OTG>;
+
+ dr_mode = "otg";
+
+ phys = <&usb2_phy1>;
+ phy-names = "usb2-phy1";
+
+ dwc2: usb@ff400000 {
+ compatible = "amlogic,meson-g12a-usb", "snps,dwc2";
+ reg = <0x0 0xff400000 0x0 0x40000>;
+ interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clkc CLKID_USB1>;
+ clock-names = "otg";
+ phys = <&usb2_phy1>;
+ dr_mode = "peripheral";
+ g-rx-fifo-size = <192>;
+ g-np-tx-fifo-size = <128>;
+ g-tx-fifo-size = <128 128 16 16 16>;
+ };
+
+ dwc3: usb@ff500000 {
+ compatible = "snps,dwc3";
+ reg = <0x0 0xff500000 0x0 0x100000>;
+ interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+ dr_mode = "host";
+ maximum-speed = "high-speed";
+ snps,dis_u2_susphy_quirk;
+ };
+ };
+
ethmac: ethernet@ff3f0000 {
compatible = "amlogic,meson-axg-dwmac",
"snps,dwmac-3.70a",
@@ -187,6 +227,8 @@
"timing-adjustment";
rx-fifo-depth = <4096>;
tx-fifo-depth = <2048>;
+ resets = <&reset RESET_ETHERNET>;
+ reset-names = "stmmaceth";
status = "disabled";
};
@@ -1734,6 +1776,16 @@
clock-names = "core", "clkin0", "clkin1";
resets = <&reset RESET_SD_EMMC_C>;
};
+
+ usb2_phy1: phy@9020 {
+ compatible = "amlogic,meson-gxl-usb2-phy";
+ #phy-cells = <0>;
+ reg = <0x0 0x9020 0x0 0x20>;
+ clocks = <&clkc CLKID_USB>;
+ clock-names = "phy";
+ resets = <&reset RESET_USB_OTG>;
+ reset-names = "phy";
+ };
};
sram: sram@fffc0000 {
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
index 1e83ec5b8c91..8514fe6a275a 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
@@ -209,7 +209,7 @@
};
ethmac: ethernet@ff3f0000 {
- compatible = "amlogic,meson-axg-dwmac",
+ compatible = "amlogic,meson-g12a-dwmac",
"snps,dwmac-3.70a",
"snps,dwmac";
reg = <0x0 0xff3f0000 0x0 0x10000>,
@@ -224,6 +224,8 @@
"timing-adjustment";
rx-fifo-depth = <4096>;
tx-fifo-depth = <2048>;
+ resets = <&reset RESET_ETHERNET>;
+ reset-names = "stmmaceth";
status = "disabled";
mdio0: mdio {
@@ -282,6 +284,8 @@
hwrng: rng@218 {
compatible = "amlogic,meson-rng";
reg = <0x0 0x218 0x0 0x4>;
+ clocks = <&clkc CLKID_RNG0>;
+ clock-names = "core";
};
};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2-plus.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2-plus.dts
index 5de2815ba99d..ce1198ad34e4 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2-plus.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2-plus.dts
@@ -19,7 +19,7 @@
regulator-min-microvolt = <680000>;
regulator-max-microvolt = <1040000>;
- pwms = <&pwm_AO_cd 1 1500 0>;
+ pwms = <&pwm_ab 0 1500 0>;
};
&vddcpu_b {
diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
index 0edd137151f8..726b91d3a905 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
@@ -13,6 +13,7 @@
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/power/meson-gxbb-power.h>
+#include <dt-bindings/reset/amlogic,meson-gxbb-reset.h>
#include <dt-bindings/thermal/thermal.h>
/ {
@@ -575,6 +576,8 @@
interrupt-names = "macirq";
rx-fifo-depth = <4096>;
tx-fifo-depth = <2048>;
+ resets = <&reset RESET_ETHERNET>;
+ reset-names = "stmmaceth";
power-domains = <&pwrc PWRC_GXBB_ETHERNET_MEM_ID>;
status = "disabled";
};
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts
index 03733fd92732..215d2f702623 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts
@@ -20,17 +20,23 @@
compatible = "globalscale,espressobin-v7-emmc", "globalscale,espressobin-v7",
"globalscale,espressobin", "marvell,armada3720",
"marvell,armada3710";
+
+ aliases {
+ /* ethernet1 is wan port */
+ ethernet1 = &switch0port3;
+ ethernet3 = &switch0port1;
+ };
};
&switch0 {
ports {
- port@1 {
+ switch0port1: port@1 {
reg = <1>;
label = "lan1";
phy-handle = <&switch0phy0>;
};
- port@3 {
+ switch0port3: port@3 {
reg = <3>;
label = "wan";
phy-handle = <&switch0phy2>;
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts
index 8570c5f47d7d..b6f4af8ebafb 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts
@@ -19,17 +19,23 @@
model = "Globalscale Marvell ESPRESSOBin Board V7";
compatible = "globalscale,espressobin-v7", "globalscale,espressobin",
"marvell,armada3720", "marvell,armada3710";
+
+ aliases {
+ /* ethernet1 is wan port */
+ ethernet1 = &switch0port3;
+ ethernet3 = &switch0port1;
+ };
};
&switch0 {
ports {
- port@1 {
+ switch0port1: port@1 {
reg = <1>;
label = "lan1";
phy-handle = <&switch0phy0>;
};
- port@3 {
+ switch0port3: port@3 {
reg = <3>;
label = "wan";
phy-handle = <&switch0phy2>;
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi
index b97218c72727..0775c16e0ec8 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi
@@ -13,6 +13,10 @@
/ {
aliases {
ethernet0 = &eth0;
+ /* for dsa slave device */
+ ethernet1 = &switch0port1;
+ ethernet2 = &switch0port2;
+ ethernet3 = &switch0port3;
serial0 = &uart0;
serial1 = &uart1;
};
@@ -120,7 +124,7 @@
#address-cells = <1>;
#size-cells = <0>;
- port@0 {
+ switch0port0: port@0 {
reg = <0>;
label = "cpu";
ethernet = <&eth0>;
@@ -131,19 +135,19 @@
};
};
- port@1 {
+ switch0port1: port@1 {
reg = <1>;
label = "wan";
phy-handle = <&switch0phy0>;
};
- port@2 {
+ switch0port2: port@2 {
reg = <2>;
label = "lan0";
phy-handle = <&switch0phy1>;
};
- port@3 {
+ switch0port3: port@3 {
reg = <3>;
label = "lan1";
phy-handle = <&switch0phy2>;
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 17a2df6a263e..5cfe3cf6f2ac 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -500,6 +500,7 @@ CONFIG_GPIO_ALTERA=m
CONFIG_GPIO_DWAPB=y
CONFIG_GPIO_MB86S7X=y
CONFIG_GPIO_MPC8XXX=y
+CONFIG_GPIO_MXC=y
CONFIG_GPIO_PL061=y
CONFIG_GPIO_RCAR=y
CONFIG_GPIO_UNIPHIER=y
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.