powerpc: remove PReP platform

PPC_PREP is marked as BROKEN since v2.6.15. Remove all PReP specific
code now.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>

7 files changed, 6 insertions, 52 deletions

diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 83b46fc32782..bdac46e3fc4e 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -647,14 +647,14 @@ menu "Bus options"
 
 config ISA
 	bool "Support for ISA-bus hardware"
-	depends on PPC_PREP || PPC_CHRP
+	depends on PPC_CHRP
 	select PPC_I8259
 	help
 	  Find out whether you have ISA slots on your motherboard.  ISA is the
 	  name of a bus system, i.e. the way the CPU talks to the other stuff
 	  inside your box.  If you have an Apple machine, say N here; if you
-	  have an IBM RS/6000 or pSeries machine or a PReP machine, say Y.  If
-	  you have an embedded board, consult your board documentation.
+	  have an IBM RS/6000 or pSeries machine, say Y.  If you have an
+	  embedded board, consult your board documentation.
 
 config ZONE_DMA
 	bool
@@ -968,7 +968,7 @@ config TASK_SIZE_BOOL
 
 config TASK_SIZE
 	hex "Size of user task space" if TASK_SIZE_BOOL
-	default "0x80000000" if PPC_PREP || PPC_8xx
+	default "0x80000000" if PPC_8xx
 	default "0xc0000000"
 
 config CONSISTENT_SIZE_BOOL
diff --git a/arch/powerpc/include/asm/dma.h b/arch/powerpc/include/asm/dma.h
index f6813e919bb2..a5c6d83b5f60 100644
--- a/arch/powerpc/include/asm/dma.h
+++ b/arch/powerpc/include/asm/dma.h
@@ -16,10 +16,6 @@
  *
  * None of this really applies for Power Macintoshes.  There is
  * basically just enough here to get kernel/dma.c to compile.
- *
- * There may be some comments or restrictions made here which are
- * not valid for the PReP platform.  Take what you read
- * with a grain of salt.
  */
 
 #include <asm/io.h>
@@ -57,7 +53,6 @@
  *  - page registers for 5-7 don't use data bit 0, represent 128K pages
  *  - page registers for 0-3 use bit 0, represent 64K pages
  *
- * On PReP, DMA transfers are limited to the lower 16MB of _physical_ memory.
  * On CHRP, the W83C553F (and VLSI Tollgate?) support full 32 bit addressing.
  * Note that addresses loaded into registers must be _physical_ addresses,
  * not logical addresses (which may differ if paging is active).
diff --git a/arch/powerpc/include/asm/io.h b/arch/powerpc/include/asm/io.h
index f94ef4213e9d..dd15e5e37d6d 100644
--- a/arch/powerpc/include/asm/io.h
+++ b/arch/powerpc/include/asm/io.h
@@ -15,10 +15,6 @@
 extern int check_legacy_ioport(unsigned long base_port);
 #define I8042_DATA_REG	0x60
 #define FDC_BASE	0x3f0
-/* only relevant for PReP */
-#define _PIDXR		0x279
-#define _PNPWRP		0xa79
-#define PNPBIOS_BASE	0xf000
 
 #if defined(CONFIG_PPC64) && defined(CONFIG_PCI)
 extern struct pci_dev *isa_bridge_pcidev;
diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h
index 7ff9eaa3ea6c..0a4cc5d649e1 100644
--- a/arch/powerpc/include/asm/processor.h
+++ b/arch/powerpc/include/asm/processor.h
@@ -40,7 +40,7 @@
  * -- BenH.
  */
 
-/* PREP sub-platform types see residual.h for these */
+/* PREP sub-platform types. Unused */
 #define _PREP_Motorola	0x01	/* motorola prep */
 #define _PREP_Firm	0x02	/* firmworks prep */
 #define _PREP_IBM	0x00	/* ibm prep */
@@ -56,13 +56,6 @@
 
 extern int _chrp_type;
 
-#ifdef CONFIG_PPC_PREP
-
-/* what kind of prep workstation we are */
-extern int _prep_type;
-
-#endif /* CONFIG_PPC_PREP */
-
 #endif /* defined(__KERNEL__) && defined(CONFIG_PPC32) */
 
 /*
diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c
index bdc499c17872..63d051f5b7a5 100644
--- a/arch/powerpc/kernel/setup-common.c
+++ b/arch/powerpc/kernel/setup-common.c
@@ -621,12 +621,6 @@ int check_legacy_ioport(unsigned long base_port)
 	case FDC_BASE: /* FDC1 */
 		np = of_find_node_by_type(NULL, "fdc");
 		break;
-#ifdef CONFIG_PPC_PREP
-	case _PIDXR:
-	case _PNPWRP:
-	case PNPBIOS_BASE:
-		/* implement me */
-#endif
 	default:
 		/* ipmi is supposed to fail here */
 		break;
diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig
index 52de8bccfb30..9089ae71334a 100644
--- a/arch/powerpc/platforms/Kconfig
+++ b/arch/powerpc/platforms/Kconfig
@@ -6,7 +6,6 @@ source "arch/powerpc/platforms/chrp/Kconfig"
 source "arch/powerpc/platforms/512x/Kconfig"
 source "arch/powerpc/platforms/52xx/Kconfig"
 source "arch/powerpc/platforms/powermac/Kconfig"
-source "arch/powerpc/platforms/prep/Kconfig"
 source "arch/powerpc/platforms/maple/Kconfig"
 source "arch/powerpc/platforms/pasemi/Kconfig"
 source "arch/powerpc/platforms/ps3/Kconfig"
@@ -233,7 +232,7 @@ endmenu
 
 config PPC601_SYNC_FIX
 	bool "Workarounds for PPC601 bugs"
-	depends on 6xx && (PPC_PREP || PPC_PMAC)
+	depends on 6xx && PPC_PMAC
 	help
 	  Some versions of the PPC601 (the first PowerPC chip) have bugs which
 	  mean that extra synchronization instructions are required near
diff --git a/arch/powerpc/platforms/prep/Kconfig b/arch/powerpc/platforms/prep/Kconfig
deleted file mode 100644
index 1547f66235d9..000000000000
--- a/arch/powerpc/platforms/prep/Kconfig
+++ /dev/null
@@ -1,23 +0,0 @@
-config PPC_PREP
-	bool "PowerPC Reference Platform (PReP) based machines"
-	depends on 6xx && BROKEN
-	select HAVE_PCSPKR_PLATFORM
-	select MPIC
-	select PPC_I8259
-	select PPC_INDIRECT_PCI
-	select PPC_UDBG_16550
-	select PPC_NATIVE
-	default n
-
-config PREP_RESIDUAL
-	bool "Support for PReP Residual Data"
-	depends on PPC_PREP
-	help
-	  Some PReP systems have residual data passed to the kernel by the
-	  firmware.  This allows detection of memory size, devices present and
-	  other useful pieces of information.  Sometimes this information is
-	  not present or incorrect, in which case it could lead to the machine 
-	  behaving incorrectly.  If this happens, either disable PREP_RESIDUAL
-	  or pass the 'noresidual' option to the kernel.
-
-	  If you are running a PReP system, say Y here, otherwise say N.