diff options
| author |   Arnd Bergmann <arnd@arndb.de> | 2021-12-20 16:04:56 +0100 |
|---|---|---|
| committer | Arnd Bergmann <arnd@arndb.de> | 2021-12-20 16:04:57 +0100 |
| commit | a5a44f4d509e9aa1341d4347bce6802f192fd5cf (patch) | |
| tree | 582001f9eb3cd79a745988b83596bde6f5d005ee /arch | |
| parent | Merge tag 'imx-bindings-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt (diff) | |
| parent | ARM: dts: imx6: phytec: Add PEB-WLBT-05 support (diff) | |
| download | linux-dev-a5a44f4d509e9aa1341d4347bce6802f192fd5cf.tar.xz linux-dev-a5a44f4d509e9aa1341d4347bce6802f192fd5cf.zip | |
Merge tag 'imx-dt-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt
i.MX arm device tree change for 5.17:
- New board support: TQ-Systems MBa6x, Y Soft IOTA Crux/Crux+ board,
JOZ Access Point, Phytec PEB-WLBT-05 support, BSH SMM-M2 IMX6ULZ
SystemMaster.
- Update SPBA bus node name to match binding schema.
- A series from Christoph Niedermaier to update imx6qdl-dhcom board
around Ethernet and USB support.
- A series from Giulio Benetti to clean up undocumented/unused fixed
clock compatibles.
- A series from Laurent Pinchart to update i.MX7 MIPI_CSI support.
- A couple of changes from Russell to update phy-mode for
vf610-zii-dev-rev-b board.
- Add Wacom digitizer support for imx7d-remarkable2 device.
* tag 'imx-dt-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (36 commits)
ARM: dts: imx6: phytec: Add PEB-WLBT-05 support
ARM: dts: imx6qdl: phytec: Add support for optional PEB-AV-02 LCD adapter
ARM: dts: imx6qdl: phytec: Add support for optional PEB-EVAL-01 board
ARM: dts: imx6qdl-dhcom: Add USB overcurrent pin on SoM layer
ARM: dts: imx7d-remarkable2: add wacom digitizer device
ARM: dts: imx6ulz-bsh-smm-m2: Add BSH SMM-M2 IMX6ULZ SystemMaster
ARM: dts: imx6qdl-dhcom: Identify the PHY by ethernet-phy-id0007.c0f0
ARM: dts: imx6qdl-dhcom: Align PHY reset timing with other DHCOM SoMs
ARM: dts: imx6qdl: drop "fsl,imx-ckih1"
ARM: dts: imx6qdl: drop "fsl,imx-ckil"
ARM: dts: imx6qdl: drop "fsl,imx-osc"
ARM: dts: imx53: drop "fsl,imx-ckih2"
ARM: dts: imx53: drop "fsl,imx-ckih1"
ARM: dts: imx53: drop "fsl,imx-ckil"
ARM: dts: imx53: drop "fsl,imx-osc"
ARM: dts: imx51: drop "fsl,imx-ckih2"
ARM: dts: imx51: drop "fsl,imx-ckih1"
ARM: dts: imx51: drop "fsl,imx-ckil"
ARM: dts: imx51: drop "fsl,imx-osc"
ARM: dts: imx50: drop "fsl,imx-ckih2"
...
Link: https://lore.kernel.org/r/20211218071427.26745-4-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Diffstat (limited to 'arch')
44 files changed, 2043 insertions, 52 deletions
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 417c06cbb1f2..5f89e18c20cb 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -486,6 +486,8 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6dl-icore-rqs.dtb \ imx6dl-lanmcu.dtb \ imx6dl-mamoj.dtb \ + imx6dl-mba6a.dtb \ + imx6dl-mba6b.dtb \ imx6dl-nit6xlite.dtb \ imx6dl-nitrogen6x.dtb \ imx6dl-phytec-mira-rdk-nand.dtb \ @@ -587,6 +589,8 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6q-kp-tpc.dtb \ imx6q-logicpd.dtb \ imx6q-marsboard.dtb \ + imx6q-mba6a.dtb \ + imx6q-mba6b.dtb \ imx6q-mccmon6.dtb \ imx6q-nitrogen6x.dtb \ imx6q-nitrogen6_max.dtb \ @@ -631,7 +635,9 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6q-wandboard.dtb \ imx6q-wandboard-revb1.dtb \ imx6q-wandboard-revd1.dtb \ + imx6q-yapp4-crux.dtb \ imx6q-zii-rdu2.dtb \ + imx6qp-mba6b.dtb \ imx6qp-nitrogen6_max.dtb \ imx6qp-nitrogen6_som2.dtb \ imx6qp-phytec-mira-rdk-nand.dtb \ @@ -644,6 +650,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6qp-tx6qp-8137-mb7.dtb \ imx6qp-vicutp.dtb \ imx6qp-wandboard-revd1.dtb \ + imx6qp-yapp4-crux-plus.dtb \ imx6qp-zii-rdu2.dtb \ imx6s-dhcom-drc02.dtb dtb-$(CONFIG_SOC_IMX6SL) += \ @@ -691,12 +698,14 @@ dtb-$(CONFIG_SOC_IMX6UL) += \ imx6ull-colibri-emmc-eval-v3.dtb \ imx6ull-colibri-eval-v3.dtb \ imx6ull-colibri-wifi-eval-v3.dtb \ + imx6ull-jozacp.dtb \ imx6ull-myir-mys-6ulx-eval.dtb \ imx6ull-opos6uldev.dtb \ imx6ull-phytec-segin-ff-rdk-nand.dtb \ imx6ull-phytec-segin-ff-rdk-emmc.dtb \ imx6ull-phytec-segin-lc-rdk-nand.dtb \ - imx6ulz-14x14-evk.dtb + imx6ulz-14x14-evk.dtb \ + imx6ulz-bsh-smm-m2.dtb dtb-$(CONFIG_SOC_IMX7D) += \ imx7d-cl-som-imx7.dtb \ imx7d-colibri-aster.dtb \ diff --git a/arch/arm/boot/dts/imx1-pinfunc.h b/arch/arm/boot/dts/imx1-pinfunc.h index 050a1fc46a77..bd2e679cb26c 100644 --- a/arch/arm/boot/dts/imx1-pinfunc.h +++ b/arch/arm/boot/dts/imx1-pinfunc.h @@ -26,9 +26,9 @@ * 2 - 0 * 3 - 1 * - * 'pin' is an integer between 0 and 0xbf. i.MX1 has 4 ports with 32 configurable - * configurable pins each. 'pin' is PORT * 32 + PORT_PIN, PORT_PIN is the pin - * number on the specific port (between 0 and 31). + * 'pin' is an integer between 0 and 0xbf. i.MX1 has 4 ports with 32 + * configurable pins each. 'pin' is PORT * 32 + PORT_PIN, PORT_PIN is + * the pin number on the specific port (between 0 and 31). */ #define MX1_PAD_A24__A24 0x00 0x004 diff --git a/arch/arm/boot/dts/imx1.dtsi b/arch/arm/boot/dts/imx1.dtsi index 9b940987864c..e312f1e74e2f 100644 --- a/arch/arm/boot/dts/imx1.dtsi +++ b/arch/arm/boot/dts/imx1.dtsi @@ -55,7 +55,7 @@ clocks { clk32 { - compatible = "fsl,imx-clk32", "fixed-clock"; + compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <32000>; }; diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi index fdcca82c9986..fa8044c21cb8 100644 --- a/arch/arm/boot/dts/imx25.dtsi +++ b/arch/arm/boot/dts/imx25.dtsi @@ -62,7 +62,7 @@ clocks { osc { - compatible = "fsl,imx-osc", "fixed-clock"; + compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <24000000>; }; @@ -200,7 +200,7 @@ }; }; - spba@50000000 { + spba-bus@50000000 { compatible = "fsl,spba-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/imx27-pinfunc.h b/arch/arm/boot/dts/imx27-pinfunc.h index 1514d80a3112..75aea0c701d4 100644 --- a/arch/arm/boot/dts/imx27-pinfunc.h +++ b/arch/arm/boot/dts/imx27-pinfunc.h @@ -26,9 +26,9 @@ * 2 - 0 * 3 - 1 * - * 'pin' is an integer between 0 and 0xbf. imx27 has 6 ports with 32 configurable - * configurable pins each. 'pin' is PORT * 32 + PORT_PIN, PORT_PIN is the pin - * number on the specific port (between 0 and 31). + * 'pin' is an integer between 0 and 0xbf. imx27 has 6 ports with 32 + * configurable pins each. 'pin' is PORT * 32 + PORT_PIN, PORT_PIN is + * the pin number on the specific port (between 0 and 31). */ #define MX27_PAD_USBH2_CLK__USBH2_CLK 0x00 0x000 diff --git a/arch/arm/boot/dts/imx31.dtsi b/arch/arm/boot/dts/imx31.dtsi index 948d2a543f8d..2adb923c0b27 100644 --- a/arch/arm/boot/dts/imx31.dtsi +++ b/arch/arm/boot/dts/imx31.dtsi @@ -166,7 +166,7 @@ }; }; - spba@50000000 { + spba-bus@50000000 { compatible = "fsl,spba-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/imx50.dtsi b/arch/arm/boot/dts/imx50.dtsi index a969f335b240..be0de0fd31f9 100644 --- a/arch/arm/boot/dts/imx50.dtsi +++ b/arch/arm/boot/dts/imx50.dtsi @@ -62,25 +62,25 @@ clocks { ckil { - compatible = "fsl,imx-ckil", "fixed-clock"; + compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <32768>; }; ckih1 { - compatible = "fsl,imx-ckih1", "fixed-clock"; + compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <22579200>; }; ckih2 { - compatible = "fsl,imx-ckih2", "fixed-clock"; + compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <0>; }; osc { - compatible = "fsl,imx-osc", "fixed-clock"; + compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <24000000>; }; @@ -108,7 +108,7 @@ reg = <0x50000000 0x10000000>; ranges; - spba@50000000 { + spba-bus@50000000 { compatible = "fsl,spba-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi index 01cfcbe5928e..56c8d87864c3 100644 --- a/arch/arm/boot/dts/imx51.dtsi +++ b/arch/arm/boot/dts/imx51.dtsi @@ -48,25 +48,25 @@ clocks { ckil { - compatible = "fsl,imx-ckil", "fixed-clock"; + compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <32768>; }; ckih1 { - compatible = "fsl,imx-ckih1", "fixed-clock"; + compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <0>; }; ckih2 { - compatible = "fsl,imx-ckih2", "fixed-clock"; + compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <0>; }; osc { - compatible = "fsl,imx-osc", "fixed-clock"; + compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <24000000>; }; @@ -178,7 +178,7 @@ reg = <0x70000000 0x10000000>; ranges; - spba@70000000 { + spba-bus@70000000 { compatible = "fsl,spba-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index 2cf3909cca2f..67487f3caee1 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -86,25 +86,25 @@ clocks { ckil { - compatible = "fsl,imx-ckil", "fixed-clock"; + compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <32768>; }; ckih1 { - compatible = "fsl,imx-ckih1", "fixed-clock"; + compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <22579200>; }; ckih2 { - compatible = "fsl,imx-ckih2", "fixed-clock"; + compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <0>; }; osc { - compatible = "fsl,imx-osc", "fixed-clock"; + compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <24000000>; }; @@ -229,7 +229,7 @@ reg = <0x50000000 0x10000000>; ranges; - spba@50000000 { + spba-bus@50000000 { compatible = "fsl,spba-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/imx6dl-mba6.dtsi b/arch/arm/boot/dts/imx6dl-mba6.dtsi new file mode 100644 index 000000000000..b749b424bbd6 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-mba6.dtsi @@ -0,0 +1,22 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright 2013 Sascha Hauer, Pengutronix + * + * Copyright 2013-2021 TQ-Systems GmbH + * Author: Markus Niebel <Markus.Niebel@tq-group.com> + */ + +ðphy { + rxdv-skew-ps = <180>; + txen-skew-ps = <0>; + rxd3-skew-ps = <180>; + rxd2-skew-ps = <180>; + rxd1-skew-ps = <180>; + rxd0-skew-ps = <180>; + txd3-skew-ps = <120>; + txd2-skew-ps = <0>; + txd1-skew-ps = <300>; + txd0-skew-ps = <120>; + txc-skew-ps = <1860>; + rxc-skew-ps = <1860>; +}; diff --git a/arch/arm/boot/dts/imx6dl-mba6a.dts b/arch/arm/boot/dts/imx6dl-mba6a.dts new file mode 100644 index 000000000000..df0a96b28af0 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-mba6a.dts @@ -0,0 +1,21 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright 2013 Sascha Hauer, Pengutronix + * + * Copyright 2013-2021 TQ-Systems GmbH + * Author: Markus Niebel <Markus.Niebel@tq-group.com> + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include "imx6dl-tqma6a.dtsi" +#include "imx6qdl-mba6.dtsi" +#include "imx6qdl-mba6a.dtsi" +#include "imx6dl-mba6.dtsi" + +/ { + model = "TQ TQMa6S/DL on MBa6x"; + compatible = "tq,imx6dl-mba6x-a", "tq,mba6a", + "tq,imx6dl-tqma6dl-a", "fsl,imx6dl"; +}; diff --git a/arch/arm/boot/dts/imx6dl-mba6b.dts b/arch/arm/boot/dts/imx6dl-mba6b.dts new file mode 100644 index 000000000000..610b19d2db0f --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-mba6b.dts @@ -0,0 +1,21 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright 2013 Sascha Hauer, Pengutronix + * + * Copyright 2013-2021 TQ-Systems GmbH + * Author: Markus Niebel <Markus.Niebel@tq-group.com> + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include "imx6dl-tqma6b.dtsi" +#include "imx6qdl-mba6.dtsi" +#include "imx6qdl-mba6b.dtsi" +#include "imx6dl-mba6.dtsi" + +/ { + model = "TQ TQMa6S/DL on MBa6x"; + compatible = "tq,imx6dl-mba6x-b", "tq,mba6b", + "tq,imx6dl-tqma6dl-b", "fsl,imx6dl"; +}; diff --git a/arch/arm/boot/dts/imx6dl-phytec-mira-rdk-nand.dts b/arch/arm/boot/dts/imx6dl-phytec-mira-rdk-nand.dts index 9f7f9f98139d..d906a7f05aaa 100644 --- a/arch/arm/boot/dts/imx6dl-phytec-mira-rdk-nand.dts +++ b/arch/arm/boot/dts/imx6dl-phytec-mira-rdk-nand.dts @@ -8,6 +8,9 @@ #include "imx6dl.dtsi" #include "imx6qdl-phytec-phycore-som.dtsi" #include "imx6qdl-phytec-mira.dtsi" +#include "imx6qdl-phytec-mira-peb-eval-01.dtsi" +#include "imx6qdl-phytec-mira-peb-av-02.dtsi" +#include "imx6qdl-phytec-mira-peb-wlbt-05.dtsi" / { model = "PHYTEC phyBOARD-Mira DualLite/Solo Carrier-Board with NAND"; diff --git a/arch/arm/boot/dts/imx6q-mba6.dtsi b/arch/arm/boot/dts/imx6q-mba6.dtsi new file mode 100644 index 000000000000..0d7be4567291 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-mba6.dtsi @@ -0,0 +1,44 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright 2013 Sascha Hauer, Pengutronix + * + * Copyright 2013-2021 TQ-Systems GmbH + * Author: Markus Niebel <Markus.Niebel@tq-group.com> + */ + +&ecspi5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi5_mba6x>; + cs-gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; +}; + +ðphy { + rxdv-skew-ps = <180>; + txen-skew-ps = <120>; + rxd3-skew-ps = <180>; + rxd2-skew-ps = <180>; + rxd1-skew-ps = <180>; + rxd0-skew-ps = <180>; + txd3-skew-ps = <120>; + txd2-skew-ps = <0>; + txd1-skew-ps = <180>; + txd0-skew-ps = <360>; + txc-skew-ps = <1860>; + rxc-skew-ps = <1860>; +}; + +&sata { + status = "okay"; +}; + +&iomuxc { + pinctrl_ecspi5_mba6x: ecspi5grp-mba6x { + fsl,pins = < + /* HYS, SPEED = MED, 100k up, DSE = 011, SRE_FAST */ + MX6QDL_PAD_SD1_DAT0__ECSPI5_MISO 0x1b099 + MX6QDL_PAD_SD1_CMD__ECSPI5_MOSI 0xb099 + MX6QDL_PAD_SD1_CLK__ECSPI5_SCLK 0xb099 + MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0xb099 /* eCSPI5 SS0 */ + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6q-mba6a.dts b/arch/arm/boot/dts/imx6q-mba6a.dts new file mode 100644 index 000000000000..349a08605a5e --- /dev/null +++ b/arch/arm/boot/dts/imx6q-mba6a.dts @@ -0,0 +1,20 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright 2013 Sascha Hauer, Pengutronix + * + * Copyright 2013-2021 TQ-Systems GmbH + * Author: Markus Niebel <Markus.Niebel@tq-group.com> + */ + +/dts-v1/; + +#include "imx6q-tqma6a.dtsi" +#include "imx6qdl-mba6.dtsi" +#include "imx6qdl-mba6a.dtsi" +#include "imx6q-mba6.dtsi" + +/ { + model = "TQ TQMa6Q on MBa6x"; + compatible = "tq,imx6q-mba6x-a", "tq,mba6a", + "tq,imx6q-tqma6q-a", "fsl,imx6q"; +}; diff --git a/arch/arm/boot/dts/imx6q-mba6b.dts b/arch/arm/boot/dts/imx6q-mba6b.dts new file mode 100644 index 000000000000..02c9f3e91b8f --- /dev/null +++ b/arch/arm/boot/dts/imx6q-mba6b.dts @@ -0,0 +1,20 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright 2013 Sascha Hauer, Pengutronix + * + * Copyright 2013-2021 TQ-Systems GmbH + * Author: Markus Niebel <Markus.Niebel@tq-group.com> + */ + +/dts-v1/; + +#include "imx6q-tqma6b.dtsi" +#include "imx6qdl-mba6.dtsi" +#include "imx6qdl-mba6b.dtsi" +#include "imx6q-mba6.dtsi" + +/ { + model = "TQ TQMa6Q on MBa6x"; + compatible = "tq,imx6q-mba6x-b", "tq,mba6b", + "tq,imx6q-tqma6q-b", "fsl,imx6q"; +}; diff --git a/arch/arm/boot/dts/imx6q-phytec-mira-rdk-emmc.dts b/arch/arm/boot/dts/imx6q-phytec-mira-rdk-emmc.dts index 2e70ea5623c6..322f071d972f 100644 --- a/arch/arm/boot/dts/imx6q-phytec-mira-rdk-emmc.dts +++ b/arch/arm/boot/dts/imx6q-phytec-mira-rdk-emmc.dts @@ -8,6 +8,9 @@ #include "imx6q.dtsi" #include "imx6qdl-phytec-phycore-som.dtsi" #include "imx6qdl-phytec-mira.dtsi" +#include "imx6qdl-phytec-mira-peb-eval-01.dtsi" +#include "imx6qdl-phytec-mira-peb-av-02.dtsi" +#include "imx6qdl-phytec-mira-peb-wlbt-05.dtsi" / { model = "PHYTEC phyBOARD-Mira Quad Carrier-Board with eMMC"; diff --git a/arch/arm/boot/dts/imx6q-phytec-mira-rdk-nand.dts b/arch/arm/boot/dts/imx6q-phytec-mira-rdk-nand.dts index 65d2e483c136..3f13726c8058 100644 --- a/arch/arm/boot/dts/imx6q-phytec-mira-rdk-nand.dts +++ b/arch/arm/boot/dts/imx6q-phytec-mira-rdk-nand.dts @@ -8,6 +8,9 @@ #include "imx6q.dtsi" #include "imx6qdl-phytec-phycore-som.dtsi" #include "imx6qdl-phytec-mira.dtsi" +#include "imx6qdl-phytec-mira-peb-eval-01.dtsi" +#include "imx6qdl-phytec-mira-peb-av-02.dtsi" +#include "imx6qdl-phytec-mira-peb-wlbt-05.dtsi" / { model = "PHYTEC phyBOARD-Mira Quad Carrier-Board with NAND"; diff --git a/arch/arm/boot/dts/imx6q-yapp4-crux.dts b/arch/arm/boot/dts/imx6q-yapp4-crux.dts new file mode 100644 index 000000000000..15f4824a5142 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-yapp4-crux.dts @@ -0,0 +1,54 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (C) 2021 Y Soft Corporation, a.s. + +/dts-v1/; + +#include "imx6q.dtsi" +#include "imx6dl-yapp4-common.dtsi" + +/ { + model = "Y Soft IOTA Crux i.MX6Quad board"; + compatible = "ysoft,imx6q-yapp4-crux", "fsl,imx6q"; + + memory@10000000 { + device_type = "memory"; + reg = <0x10000000 0xf0000000>; + }; +}; + +&gpio_oled { + status = "okay"; +}; + +&leds { + status = "okay"; +}; + +&oled_1305 { + status = "okay"; +}; + +&oled_1309 { + status = "okay"; +}; + +®_usb_h1_vbus { + status = "okay"; +}; + +&touchkeys { + status = "okay"; +}; + +&uart2 { + status = "disabled"; +}; + +&usbh1 { + status = "okay"; +}; + +&usbphy2 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6qdl-dhcom-drc02.dtsi b/arch/arm/boot/dts/imx6qdl-dhcom-drc02.dtsi index 3d0a50a9ab21..702cd4a1b2e6 100644 --- a/arch/arm/boot/dts/imx6qdl-dhcom-drc02.dtsi +++ b/arch/arm/boot/dts/imx6qdl-dhcom-drc02.dtsi @@ -95,6 +95,10 @@ rts-gpios = <&gpio7 13 GPIO_ACTIVE_HIGH>; /* GPIO P */ }; +&usbh1 { + disable-over-current; +}; + &usdhc2 { /* SD card */ status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-dhcom-pdk2.dtsi b/arch/arm/boot/dts/imx6qdl-dhcom-pdk2.dtsi index dc21853706a5..dc89b554e694 100644 --- a/arch/arm/boot/dts/imx6qdl-dhcom-pdk2.dtsi +++ b/arch/arm/boot/dts/imx6qdl-dhcom-pdk2.dtsi @@ -260,6 +260,10 @@ status = "okay"; }; +&usbh1 { + disable-over-current; +}; + &usdhc2 { /* SD card */ status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-dhcom-som.dtsi b/arch/arm/boot/dts/imx6qdl-dhcom-som.dtsi index 5d10c40313cb..5befbe13d1a3 100644 --- a/arch/arm/boot/dts/imx6qdl-dhcom-som.dtsi +++ b/arch/arm/boot/dts/imx6qdl-dhcom-som.dtsi @@ -132,14 +132,15 @@ #size-cells = <0>; ethphy0: ethernet-phy@0 { /* SMSC LAN8710Ai */ - compatible = "ethernet-phy-ieee802.3-c22"; + compatible = "ethernet-phy-id0007.c0f0", + "ethernet-phy-ieee802.3-c22"; interrupt-parent = <&gpio4>; interrupts = <15 IRQ_TYPE_LEVEL_LOW>; pinctrl-0 = <&pinctrl_ethphy0>; pinctrl-names = "default"; reg = <0>; - reset-assert-us = <1000>; - reset-deassert-us = <1000>; + reset-assert-us = <500>; + reset-deassert-us = <500>; reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; smsc,disable-energy-detect; /* Make plugin detection reliable */ }; @@ -728,6 +729,7 @@ pinctrl_usbh1: usbh1-grp { fsl,pins = < MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x120b0 + MX6QDL_PAD_EIM_D30__USB_H1_OC 0x1b0b1 >; }; diff --git a/arch/arm/boot/dts/imx6qdl-mba6.dtsi b/arch/arm/boot/dts/imx6qdl-mba6.dtsi new file mode 100644 index 000000000000..daf76345b179 --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-mba6.dtsi @@ -0,0 +1,526 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright 2013 Sascha Hauer, Pengutronix + * + * Copyright 2013-2021 TQ-Systems GmbH + * Author: Markus Niebel <Markus.Niebel@tq-group.com> + */ + +#include <dt-bindings/clock/imx6qdl-clock.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/sound/fsl-imx-audmux.h> + +/ { + aliases { + mmc0 = &usdhc3; + mmc1 = &usdhc2; + /delete-property/ mmc2; + /delete-property/ mmc3; + }; + + chosen { + stdout-path = &uart2; + }; + + beeper: gpio-beeper { + compatible = "gpio-beeper"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpiobeeper>; + gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>; + }; + + gpio_buttons: gpio-buttons { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpiobuttons>; + + button1 { + label = "s6"; + linux,code = <KEY_F6>; + gpios = <&gpio7 13 GPIO_ACTIVE_LOW>; + }; + + button2 { + label = "s7"; + linux,code = <KEY_F7>; + gpios = <&gpio7 12 GPIO_ACTIVE_LOW>; + }; + + button3 { + label = "s8"; + linux,code = <KEY_F8>; + gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpioled>; + + led1 { + label = "led1"; + gpios = <&gpio6 16 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + + led2 { + label = "led2"; + gpios = <&gpio6 31 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + + reg_mba6_3p3v: regulator-mba6-3p3v { + compatible = "regulator-fixed"; + regulator-name = "supply-mba6-3p3v"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_pcie: regulator-pcie { + compatible = "regulator-fixed"; + regulator-name = "supply-pcie"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + /* PCIE.PWR_EN */ + gpio = <&gpio2 0 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + vin-supply = <®_mba6_3p3v>; + }; + + reg_vcc3v3_audio: regulator-vcc3v3-audio { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3-audio"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <®_mba6_3p3v>; + }; + + sound { + compatible = "fsl,imx-audio-tlv320aic32x4"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux>; + model = "imx-audio-tlv320aic32x4"; + ssi-controller = <&ssi1>; + audio-codec = <&tlv320aic32x4>; + audio-asrc = <&asrc>; + audio-routing = + "IN3_L", "Mic Jack", + "Mic Jack", "Mic Bias", + "IN1_L", "Line In Jack", + "IN1_R", "Line In Jack", + "Line Out Jack", "LOL", + "Line Out Jack", "LOR"; + mux-int-port = <1>; + mux-ext-port = <3>; + }; +}; + +&audmux { + status = "okay"; + + ssi0 { + fsl,audmux-port = <MX31_AUDMUX_PORT1_SSI0>; + fsl,port-config = < + (IMX_AUDMUX_V2_PTCR_SYN | + IMX_AUDMUX_V2_PTCR_TFSDIR | + IMX_AUDMUX_V2_PTCR_TFSEL(MX31_AUDMUX_PORT3_SSI_PINS_3) | + IMX_AUDMUX_V2_PTCR_TCLKDIR | + IMX_AUDMUX_V2_PTCR_TCSEL(MX31_AUDMUX_PORT3_SSI_PINS_3)) + IMX_AUDMUX_V2_PDCR_RXDSEL(MX31_AUDMUX_PORT3_SSI_PINS_3) + >; + }; + + aud3 { + fsl,audmux-port = <MX31_AUDMUX_PORT3_SSI_PINS_3>; + fsl,port-config = < + IMX_AUDMUX_V2_PTCR_SYN + IMX_AUDMUX_V2_PDCR_RXDSEL(MX31_AUDMUX_PORT1_SSI0) + >; + }; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can1>; + status = "okay"; +}; + +&can2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can2>; + status = "okay"; +}; + +&ecspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>, <&pinctrl_ecspi1_mba6>; + cs-gpios = <&gpio3 19 0>, <&gpio3 24 0>; +}; + +&fec { + phy-mode = "rgmii-id"; + phy-handle = <ðphy>; + mac-address = [00 00 00 00 00 00]; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy: ethernet-phy@3 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <3>; + interrupt-parent = <&gpio1>; + interrupts = <28 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; + reset-assert-us = <1000>; + reset-deassert-us = <100000>; + micrel,force-master; + max-speed = <1000>; + }; + }; +}; + +&i2c1 { + tlv320aic32x4: audio-codec@18 { + compatible = "ti,tlv320aic32x4"; + reg = <0x18>; + clocks = <&clks IMX6QDL_CLK_CKO>; + clock-names = "mclk"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_codec>; + ldoin-supply = <®_vcc3v3_audio>; + iov-supply = <®_mba6_3p3v>; + }; +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie>; + reset-gpio = <&gpio6 7 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "okay"; +}; + +&pwm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm3>; + status = "okay"; +}; + +&pwm4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm4>; + status = "okay"; +}; + +&snvs_poweroff { + status = "okay"; +}; + +&ssi1 { + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + uart-has-rtscts; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + uart-has-rtscts; + linux,rs485-enabled-at-boot-time; + rs485-rts-active-low; + rs485-rx-during-tx; + status = "okay"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + uart-has-rtscts; + status = "okay"; +}; + +&usbh1 { + disable-over-current; + status = "okay"; +}; + +&usbotg { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + power-active-high; + over-current-active-low; + srp-disable; + hnp-disable; + adp-disable; + dr_mode = "otg"; + status = "okay"; +}; + +/* SD card slot */ +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + vmmc-supply = <®_mba6_3p3v>; + bus-width = <4>; + no-1-8-v; + no-mmc; + no-sdio; + cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog1>; + /* does not work on unmodified starter kit */ + /* fsl,ext-reset-output; */ + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x1b0b0 + MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x1b0b0 + MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x1b0b0 + MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x1b0b0 + >; + }; + + pinctrl_can1: can1grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0xb099 + MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0xb099 + >; + }; + + pinctrl_can2: can2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0xb099 + MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0xb099 + >; + }; + + pinctrl_codec: codecgrp { + fsl,pins = < + MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1 0xb0 /* CLK */ + >; + }; + + pinctrl_ecspi1_mba6: ecspimba6grp { + fsl,pins = < + MX6QDL_PAD_EIM_D24__GPIO3_IO24 0xb099 /* eCSPI1 SS2 */ + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + /* FEC phy IRQ */ + MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x00011008 + /* FEC phy reset */ + MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b099 + /* DSE = 100, 100k up, SPEED = MED */ + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0xb0a0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0xb0a0 + /* DSE = 111, pull 100k up */ + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0xb038 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0xb038 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0xb038 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0xb038 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0xb038 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0xb038 + /* DSE = 111, pull external */ + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x0038 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x0038 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x0038 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x0038 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x0038 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x0038 + /* HYS = 1, DSE = 111, 100k up, SPEED = HIGH */ + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0f0 + >; + }; + + pinctrl_gpiobeeper: gpiobeepergrp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT3__GPIO1_IO21 0xb099 + >; + }; + + pinctrl_gpiobuttons: gpiobuttongrp { + fsl,pins = < + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x0001b099 + MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x0001b099 + MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0001b099 + >; + }; + + pinctrl_gpioled: gpioledgrp { + fsl,pins = < + MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0xb099 /* LED V15 */ + MX6QDL_PAD_EIM_BCLK__GPIO6_IO31 0xb099 /* LED V16 */ + >; + }; + + pinctrl_hog: hoggrp { + fsl,pins = < + /* LCD.CONTRAST -> Rev 0100 only, not used on Rev.0200*/ + MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x0001b099 + + MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x0001b099 + MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x0001b099 + MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x0001b099 + + MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x0001b099 + MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x0001b099 + MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x0001b099 + MX6QDL_PAD_SD4_DAT0__GPIO2_IO08 0x0001b099 + MX6QDL_PAD_EIM_CS0__GPIO2_IO23 0x0001b099 + MX6QDL_PAD_EIM_CS1__GPIO2_IO24 0x0001b099 + MX6QDL_PAD_EIM_OE__GPIO2_IO25 0x0001b099 + + MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x0001b099 + MX6QDL_PAD_EIM_D26__GPIO3_IO26 0x0001b099 + MX6QDL_PAD_EIM_D27__GPIO3_IO27 0x0001b099 + MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x0001b099 + MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x0001b099 + + MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x0001b099 + MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x0001b099 + MX6QDL_PAD_KEY_COL1__GPIO4_IO08 0x0001b099 + MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x0001b099 + + MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18 0x0001b099 + MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x0001b099 + MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21 0x0001b099 + + MX6QDL_PAD_NANDF_ALE__GPIO6_IO08 0x0001b099 + MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x0001b099 + >; + }; + + pinctrl_pcie: pciegrp { + fsl,pins = < + /* HYS = 1, DSE = 110, 100k up, SPEED = HIGH (11)*/ + MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x001b0f0 /* #PCIE.WAKE */ + MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x001b0f0 /* #PCIE.RST */ + MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x001b0f0 /* #PCIE.DIS */ + /* HYS = 1, DSE = 110, PUE+PKE, SPEED = HIGH (11)*/ + MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x00130f0 /* PCIE.PWR_EN */ + >; + }; + + pinctrl_pwm1: pwm1grp { + fsl,pins = < + /* 100 k PD, DSE 120 OHM, SPPEED LO */ + MX6QDL_PAD_GPIO_9__PWM1_OUT 0x00003050 + >; + }; + + pinctrl_pwm3: pwm3grp { + fsl,pins = < + /* 100 k PD, DSE 120 OHM, SPPEED LO */ + MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x00003050 + >; + }; + + pinctrl_pwm4: pwm4grp { + fsl,pins = < + /* 100 k PD, DSE 120 OHM, SPPEED LO */ + MX6QDL_PAD_SD4_DAT2__PWM4_OUT 0x00003050 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b099 + MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b099 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX6QDL_PAD_SD4_CLK__UART3_RX_DATA 0x1b0b1 + MX6QDL_PAD_SD4_CMD__UART3_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D30__UART3_CTS_B 0x1b0b1 + MX6QDL_PAD_EIM_D31__UART3_RTS_B 0x1b0b1 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B 0x1b0b1 + MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B 0x1b0b1 + >; + }; + + pinctrl_uart5: uart5grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT14__UART5_TX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT15__UART5_RX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT18__UART5_RTS_B 0x1b0b1 + MX6QDL_PAD_CSI0_DAT19__UART5_CTS_B 0x1b0b1 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + /* CLK: 47k Pup SPD_LOW DSE 40Ohm SRE_FAST HYS */ + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x00017071 + /* SD2: 47k Pup SPD_LOW DSE 80Ohm SRE_FAST HYS */ + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x00017059 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x00017059 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x00017059 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x00017059 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x00017059 + + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x0001b099 /* usdhc2 CD */ + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x0001b099 /* usdhc2 WP */ + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__USB_OTG_OC 0x0001b0b0 + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x00017059 + MX6QDL_PAD_EIM_D22__USB_OTG_PWR 0x0001b099 + >; + }; + + pinctrl_wdog1: wdog1grp { + fsl,pins = < + /* Watchdog out */ + MX6QDL_PAD_SD1_DAT2__WDOG1_B 0x0000b099 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6qdl-mba6a.dtsi b/arch/arm/boot/dts/imx6qdl-mba6a.dtsi new file mode 100644 index 000000000000..a61f2705a340 --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-mba6a.dtsi @@ -0,0 +1,36 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright 2013 Sascha Hauer, Pengutronix + * + * Copyright 2013-2021 TQ-Systems GmbH + * Author: Markus Niebel <Markus.Niebel@tq-group.com> + */ + +/ { + aliases { + rtc0 = &rtc0; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>, <&pinctrl_enet_fix>; +}; + +&i2c1 { + lm75: temperature-sensor@49 { + compatible = "national,lm75"; + reg = <0x49>; + }; + + m24c64_57: eeprom@57 { + compatible = "atmel,24c64"; + reg = <0x57>; + pagesize = <32>; + }; + + rtc0: rtc@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + }; +}; diff --git a/arch/arm/boot/dts/imx6qdl-mba6b.dtsi b/arch/arm/boot/dts/imx6qdl-mba6b.dtsi new file mode 100644 index 000000000000..9f9f7037c9e4 --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-mba6b.dtsi @@ -0,0 +1,52 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright 2013 Sascha Hauer, Pengutronix + * + * Copyright 2013-2021 TQ-Systems GmbH + * Author: Markus Niebel <Markus.Niebel@tq-group.com> + */ + +/ { + aliases { + rtc0 = &rtc0; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; +}; + +&i2c3 { + lm75: temperature-sensor@49 { + compatible = "national,lm75"; + reg = <0x49>; + }; + + m24c64_57: eeprom@57 { + compatible = "atmel,24c64"; + reg = <0x57>; + pagesize = <32>; + }; + + rtc0: rtc@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + }; +}; + +&iomuxc { + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b899 + MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b899 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6qdl-phytec-mira-peb-av-02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-mira-peb-av-02.dtsi new file mode 100644 index 000000000000..393475cb0f4d --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-phytec-mira-peb-av-02.dtsi @@ -0,0 +1,119 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2018 PHYTEC Messtechnik + * Author: Christian Hemp <c.hemp@phytec.de> + */ + +/ { + display: display0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx-parallel-display"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_disp0>; + interface-pix-fmt = "rgb24"; + status = "disabled"; + + port@0 { + reg = <0>; + + display0_in: endpoint { + remote-endpoint = <&ipu1_di0_disp0>; + }; + }; + + port@1 { + reg = <1>; + + display0_out: endpoint { + remote-endpoint = <&peb_panel_lcd_in>; + }; + }; + }; + + panel-lcd { + compatible = "edt,etm0700g0edh6"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_disp0_pwr>; + power-supply = <®_display>; + enable-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>; + backlight = <&backlight>; + status = "disabled"; + + port { + peb_panel_lcd_in: endpoint { + remote-endpoint = <&display0_out>; + }; + }; + }; + + reg_display: regulator-peb-display { + compatible = "regulator-fixed"; + regulator-name = "peb-display"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&i2c1 { + edt_ft5x06: touchscreen@38 { + compatible = "edt,edt-ft5406"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_edt_ft5x06>; + reg = <0x38>; + interrupt-parent = <&gpio3>; + interrupts = <2 IRQ_TYPE_NONE>; + status = "disabled"; + }; +}; + +&ipu1_di0_disp0 { + remote-endpoint = <&display0_in>; +}; + +&iomuxc { + pinctrl_disp0: disp0grp { + fsl,pins = < + MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10 + MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10 + MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10 + MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x1b080 + MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x10 + MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x10 + MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x10 + MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x10 + MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x10 + MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x10 + MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x10 + MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x10 + MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x10 + MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10 + MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x10 + MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x10 + MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x10 + MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x10 + MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x10 + MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x10 + MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x10 + MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x10 + MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x10 + MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x10 + MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x10 + MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x10 + MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x10 + MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x10 + >; + }; + + pinctrl_disp0_pwr: disp0pwrgrp { + fsl,pins = < + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 + >; + }; + + pinctrl_edt_ft5x06: edtft5x06grp { + fsl,pins = < + MX6QDL_PAD_EIM_DA2__GPIO3_IO02 0xb0b1 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6qdl-phytec-mira-peb-eval-01.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-mira-peb-eval-01.dtsi new file mode 100644 index 000000000000..037b60197598 --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-phytec-mira-peb-eval-01.dtsi @@ -0,0 +1,71 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2018 PHYTEC Messtechnik + * Author: Christian Hemp <c.hemp@phytec.de> + */ + +#include <dt-bindings/input/input.h> + +/ { + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_keys>; + status = "disabled"; + + power { + label = "Power Button"; + gpios = <&gpio5 28 GPIO_ACTIVE_LOW>; + linux,code = <KEY_WAKEUP>; + wakeup-source; + }; + + sleep { + label = "Sleep Button"; + gpios = <&gpio6 18 GPIO_ACTIVE_LOW>; + linux,code = <KEY_SLEEP>; + }; + }; + + user_leds: user-leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_user_leds>; + status = "disabled"; + + user-led1 { + gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "gpio"; + default-state = "on"; + }; + + user-led2 { + gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "gpio"; + default-state = "on"; + }; + + user-led3 { + gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "gpio"; + default-state = "on"; + }; + }; +}; + +&iomuxc { + pinctrl_gpio_keys: gpiokeysgrp { + fsl,pins = < + MX6QDL_PAD_SD3_DAT6__GPIO6_IO18 0x1b0b0 + MX6QDL_PAD_CSI0_DAT10__GPIO5_IO28 0x1b0b0 + >; + }; + + pinctrl_user_leds: userledsgrp { + fsl,pins = < + MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x1b0b0 + MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0 + MX6QDL_PAD_CSI0_DAT11__GPIO5_IO29 0x1b0b0 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6qdl-phytec-mira-peb-wlbt-05.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-mira-peb-wlbt-05.dtsi new file mode 100644 index 000000000000..84f884d6e55b --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-phytec-mira-peb-wlbt-05.dtsi @@ -0,0 +1,85 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2021 PHYTEC Messtechnik GmbH + * Author: Yunus Bas <y.bas@phytec.de> + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + reg_wl_en: regulator-wl-en { + compatible = "regulator-fixed"; + regulator-name = "wlan_en"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wl>; + gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>; + enable-active-high; + startup-delay-us = <100>; + status = "disabled"; + }; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3_bt>; + uart-has-rtscts; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + shutdown-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>; + device-wakeup-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>; + host-wakeup-gpios = <&gpio5 26 GPIO_ACTIVE_HIGH>; + status = "disabled"; + }; +}; + +&usdhc3 { + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3_wl>; + vmmc-supply = <®_wl_en>; + bus-width = <4>; + non-removable; + no-1-8-v; + status = "disabled"; + + brmcf: wifi@1 { + compatible = "brcm,bcm4329-fmac"; + reg = <1>; + }; +}; + +&iomuxc { + pinctrl_uart3_bt: uart3grp-bt { + fsl,pins = < + MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_EB3__UART3_RTS_B 0x1b0b1 + MX6QDL_PAD_EIM_D23__UART3_CTS_B 0x1b0b1 + MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0xb0b1 /* BT ENABLE */ + MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0xb0b1 /* DEV WAKEUP */ + MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26 0xb0b1 /* HOST WAKEUP */ + >; + }; + + pinctrl_usdhc3_wl: usdhc3grp-wl { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + >; + }; + + pinctrl_wl: wlgrp { + fsl,pins = < + MX6QDL_PAD_EIM_A25__GPIO5_IO02 0xb0b1 /* WLAN ENABLE */ + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6qdl-tqma6a.dtsi b/arch/arm/boot/dts/imx6qdl-tqma6a.dtsi index b679bec78e6c..bfb67da64b96 100644 --- a/arch/arm/boot/dts/imx6qdl-tqma6a.dtsi +++ b/arch/arm/boot/dts/imx6qdl-tqma6a.dtsi @@ -4,6 +4,12 @@ * Copyright 2013-2017 Markus Niebel <Markus.Niebel@tq-group.com> */ +&fec { + interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>, + <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>; + fsl,err006687-workaround-present; +}; + &i2c1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1>; @@ -26,3 +32,17 @@ pagesize = <32>; }; }; + +&iomuxc { + /* + * This pinmuxing is required for the ERR006687 workaround. Board + * DTS files that enable the FEC controller with + * fsl,err006687-workaround-present must include this group. + */ + pinctrl_enet_fix: enetfixgrp { + fsl,pins = < + /* ENET ping patch */ + MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index f5de5def876d..d27beb47f9a3 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -55,19 +55,19 @@ clocks { ckil { - compatible = "fsl,imx-ckil", "fixed-clock"; + compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <32768>; }; ckih1 { - compatible = "fsl,imx-ckih1", "fixed-clock"; + compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <0>; }; osc { - compatible = "fsl,imx-osc", "fixed-clock"; + compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <24000000>; }; @@ -481,7 +481,7 @@ status = "okay"; }; - spba@203c000 { + spba-bus@203c000 { reg = <0x0203c000 0x4000>; }; }; diff --git a/arch/arm/boot/dts/imx6qp-mba6b.dts b/arch/arm/boot/dts/imx6qp-mba6b.dts new file mode 100644 index 000000000000..eee2e09d6e94 --- /dev/null +++ b/arch/arm/boot/dts/imx6qp-mba6b.dts @@ -0,0 +1,18 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright 2015-2021 TQ-Systems GmbH + * Author: Markus Niebel <Markus.Niebel@tq-group.com> + */ +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include "imx6qp-tqma6b.dtsi" +#include "imx6qdl-mba6.dtsi" +#include "imx6qdl-mba6b.dtsi" +#include "imx6q-mba6.dtsi" + +/ { + model = "TQ TQMa6QP on MBa6x"; + compatible = "tq,imx6qp-mba6x-b", "tq,mba6b", + "tq,imx6qp-tqma6qp-b", "fsl,imx6qp"; +}; diff --git a/arch/arm/boot/dts/imx6qp-phytec-mira-rdk-nand.dts b/arch/arm/boot/dts/imx6qp-phytec-mira-rdk-nand.dts index f27d7ab42626..a18266598d39 100644 --- a/arch/arm/boot/dts/imx6qp-phytec-mira-rdk-nand.dts +++ b/arch/arm/boot/dts/imx6qp-phytec-mira-rdk-nand.dts @@ -8,6 +8,9 @@ #include "imx6qp.dtsi" #include "imx6qdl-phytec-phycore-som.dtsi" #include "imx6qdl-phytec-mira.dtsi" +#include "imx6qdl-phytec-mira-peb-eval-01.dtsi" +#include "imx6qdl-phytec-mira-peb-av-02.dtsi" +#include "imx6qdl-phytec-mira-peb-wlbt-05.dtsi" / { model = "PHYTEC phyBOARD-Mira QuadPlus Carrier-Board with NAND"; diff --git a/arch/arm/boot/dts/imx6qp-yapp4-crux-plus.dts b/arch/arm/boot/dts/imx6qp-yapp4-crux-plus.dts new file mode 100644 index 000000000000..cea165f2161a --- /dev/null +++ b/arch/arm/boot/dts/imx6qp-yapp4-crux-plus.dts @@ -0,0 +1,54 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (C) 2021 Y Soft Corporation, a.s. + +/dts-v1/; + +#include "imx6qp.dtsi" +#include "imx6dl-yapp4-common.dtsi" + +/ { + model = "Y Soft IOTA Crux+ i.MX6QuadPlus board"; + compatible = "ysoft,imx6qp-yapp4-crux-plus", "fsl,imx6qp"; + + memory@10000000 { + device_type = "memory"; + reg = <0x10000000 0xf0000000>; + }; +}; + +&gpio_oled { + status = "okay"; +}; + +&leds { + status = "okay"; +}; + +&oled_1305 { + status = "okay"; +}; + +&oled_1309 { + status = "okay"; +}; + +®_usb_h1_vbus { + status = "okay"; +}; + +&touchkeys { + status = "okay"; +}; + +&uart2 { + status = "disabled"; +}; + +&usbh1 { + status = "okay"; +}; + +&usbphy2 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6ul-phytec-segin-ff-rdk-nand.dts b/arch/arm/boot/dts/imx6ul-phytec-segin-ff-rdk-nand.dts index bff98e676980..607eddc5030f 100644 --- a/arch/arm/boot/dts/imx6ul-phytec-segin-ff-rdk-nand.dts +++ b/arch/arm/boot/dts/imx6ul-phytec-segin-ff-rdk-nand.dts @@ -10,6 +10,7 @@ #include "imx6ul-phytec-segin.dtsi" #include "imx6ul-phytec-segin-peb-eval-01.dtsi" #include "imx6ul-phytec-segin-peb-av-02.dtsi" +#include "imx6ul-phytec-segin-peb-wlbt-05.dtsi" / { model = "PHYTEC phyBOARD-Segin i.MX6 UltraLite Full Featured with NAND"; diff --git a/arch/arm/boot/dts/imx6ul-phytec-segin-peb-wlbt-05.dtsi b/arch/arm/boot/dts/imx6ul-phytec-segin-peb-wlbt-05.dtsi new file mode 100644 index 000000000000..04477fd4b9a9 --- /dev/null +++ b/arch/arm/boot/dts/imx6ul-phytec-segin-peb-wlbt-05.dtsi @@ -0,0 +1,90 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2021 PHYTEC Messtechnik GmbH + * Author: Yunus Bas <y.bas@phytec.de> + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + reg_wl_en: regulator-wl-en { + compatible = "regulator-fixed"; + regulator-name = "wlan_en"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wl>; + gpio = <&gpio5 9 GPIO_ACTIVE_HIGH>; + enable-active-high; + startup-delay-us = <100>; + status = "disabled"; + }; +}; + +&iomuxc { + pinctrl_bt: btgrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO01__GPIO1_IO01 0x3031 /* BT ENABLE */ + MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0x3031 /* HOST WAKEUP */ + MX6UL_PAD_JTAG_MOD__GPIO1_IO10 0x3031 /* DEV WAKEUP */ + >; + }; + + pinctrl_uart2_bt: uart2grp-bt { + fsl,pins = < + MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX 0x17059 + MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX 0x17059 + MX6UL_PAD_UART2_CTS_B__UART2_DCE_CTS 0x17059 + MX6UL_PAD_UART2_RTS_B__UART2_DCE_RTS 0x17059 + >; + }; + + pinctrl_usdhc2_wl: usdhc2grp-wl { + fsl,pins = < + MX6UL_PAD_LCD_DATA18__USDHC2_CMD 0x10051 + MX6UL_PAD_LCD_DATA19__USDHC2_CLK 0x10061 + MX6UL_PAD_LCD_DATA20__USDHC2_DATA0 0x10051 + MX6UL_PAD_LCD_DATA21__USDHC2_DATA1 0x10051 + MX6UL_PAD_LCD_DATA22__USDHC2_DATA2 0x10051 + MX6UL_PAD_LCD_DATA23__USDHC2_DATA3 0x10051 + >; + }; + + pinctrl_wl: wlgrp { + fsl,pins = < + MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x3031 /* WLAN ENABLE */ + >; + }; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2_bt &pinctrl_bt>; + uart-has-rtscts; + status = "disabled"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + shutdown-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>; + device-wakeup-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; + host-wakeup-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>; + }; +}; + +&usdhc2 { + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2_wl>; + vmmc-supply = <®_wl_en>; + bus-width = <4>; + non-removable; + no-1-8-v; + status = "disabled"; + + brmcf: wifi@1 { + compatible = "brcm,bcm4329-fmac"; + reg = <1>; + }; +}; diff --git a/arch/arm/boot/dts/imx6ull-jozacp.dts b/arch/arm/boot/dts/imx6ull-jozacp.dts new file mode 100644 index 000000000000..a152eeb78e88 --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-jozacp.dts @@ -0,0 +1,456 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (c) 2020 Protonic Holland + * Copyright (c) 2020 Oleksij Rempel <kernel@pengutronix.de>, Pengutronix + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> +#include "imx6ull.dtsi" + +/ { + model = "JOZ Access Point"; + compatible = "joz,jozacp", "fsl,imx6ull"; + + chosen { + stdout-path = &uart1; + }; + + /* On board name LED_RGB1 */ + led-controller-1 { + compatible = "pwm-leds"; + + led-0 { + color = <LED_COLOR_ID_RED>; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <0>; + pwms = <&pwm1 0 10000000 0>; + max-brightness = <255>; + }; + + led-1 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <1>; + pwms = <&pwm3 0 10000000 0>; + max-brightness = <255>; + }; + + led-2 { + color = <LED_COLOR_ID_BLUE>; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <2>; + pwms = <&pwm5 0 10000000 0>; + max-brightness = <255>; + linux,default-trigger = "heartbeat"; + }; + }; + + /* On board name LED_RGB2 */ + led-controller-2 { + compatible = "pwm-leds"; + + led-3 { + color = <LED_COLOR_ID_RED>; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <3>; + pwms = <&pwm2 0 10000000 0>; + max-brightness = <255>; + }; + + led-4 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <4>; + pwms = <&pwm4 0 10000000 0>; + max-brightness = <255>; + }; + + led-5 { + color = <LED_COLOR_ID_BLUE>; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <5>; + pwms = <&pwm6 0 10000000 0>; + max-brightness = <255>; + }; + }; + + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <®_5v0>; + }; + + reg_5v0: regulator-5v0 { + compatible = "regulator-fixed"; + regulator-name = "5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_vbus: regulator-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_vbus>; + regulator-name = "vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <®_5v0>; + gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + usdhc2_wifi_pwrseq: usdhc2-wifi-pwrseq { + compatible = "mmc-pwrseq-simple"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wifi_npd>; + reset-gpios = <&gpio4 25 GPIO_ACTIVE_LOW>; + }; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can1>; + status = "okay"; +}; + +&cpu0 { + clock-frequency = <792000000>; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet1>; + phy-mode = "rmii"; + phy-handle = <ðphy0>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@0 { + reg = <0>; + clocks = <&clks IMX6UL_CLK_ENET_REF>; + clock-names = "rmii-ref"; + interrupts-extended = <&gpio1 29 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio1 28 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <300>; + }; + }; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + clock-frequency = <100000>; + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + clock-frequency = <100000>; + status = "okay"; + + rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "okay"; +}; + +&pwm2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm2>; + status = "okay"; +}; + +&pwm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm3>; + status = "okay"; +}; + +&pwm4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm4>; + status = "okay"; +}; + +&pwm5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm5>; + status = "okay"; +}; + +&pwm6 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm6>; + status = "okay"; +}; + +&snvs_rtc { + status = "disabled"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + dtr-gpios = <&gpio3 4 GPIO_ACTIVE_LOW>; + uart-has-rtscts; + status = "okay"; +}; + +&usbotg1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg1>; + vbus-supply = <®_vbus>; + dr_mode = "host"; + over-current-active-low; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + vmmc-supply = <®_3v3>; + bus-width = <8>; + no-1-8-v; + non-removable; + cap-mmc-hw-reset; + no-sd; + no-sdio; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + mmc-pwrseq = <&usdhc2_wifi_pwrseq>; + bus-width = <4>; + no-1-8-v; + no-mmc; + no-sd; + non-removable; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + wifi@1 { + compatible = "brcm,bcm4329-fmac"; + reg = <1>; + }; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + pinctrl_can1: can1grp { + fsl,pins = < + MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX 0x1b0b0 + MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX 0x1b0b0 + >; + }; + + pinctrl_enet1: enet1grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO07__ENET1_MDC 0x1b0b0 + MX6UL_PAD_GPIO1_IO06__ENET1_MDIO 0x1b0b0 + MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x1b0b0 + MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x1b0b0 + MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0 + MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0 + MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0 + MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0 + MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0 + MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b031 + + MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28 0x038b0 + MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29 0x170b0 + >; + }; + + pinctrl_hog: hoggrp { + fsl,pins = < + /* HW Revision */ + MX6UL_PAD_ENET2_RX_DATA0__GPIO2_IO08 0x1b0b0 + MX6UL_PAD_ENET2_RX_DATA1__GPIO2_IO09 0x1b0b0 + MX6UL_PAD_ENET2_RX_EN__GPIO2_IO10 0x1b0b0 + + /* HW ID */ + MX6UL_PAD_ENET2_TX_DATA0__GPIO2_IO11 0x1b0b0 + MX6UL_PAD_ENET2_TX_DATA1__GPIO2_IO12 0x1b0b0 + MX6UL_PAD_ENET2_TX_EN__GPIO2_IO13 0x1b0b0 + MX6UL_PAD_ENET2_TX_CLK__GPIO2_IO14 0x1b0b0 + MX6UL_PAD_ENET2_RX_ER__GPIO2_IO15 0x1b0b0 + + /* Digital inputs */ + MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0x11000 + MX6UL_PAD_GPIO1_IO04__GPIO1_IO04 0x11000 + MX6UL_PAD_GPIO1_IO05__GPIO1_IO05 0x11000 + MX6UL_PAD_GPIO1_IO08__GPIO1_IO08 0x11000 + MX6UL_PAD_GPIO1_IO09__GPIO1_IO09 0x11000 + + /* Isolated outputs */ + MX6UL_PAD_UART2_TX_DATA__GPIO1_IO20 0x01020 + MX6UL_PAD_UART2_RX_DATA__GPIO1_IO21 0x01020 + MX6UL_PAD_UART2_RTS_B__GPIO1_IO23 0x01020 + MX6UL_PAD_UART3_TX_DATA__GPIO1_IO24 0x01020 + MX6UL_PAD_UART3_RX_DATA__GPIO1_IO25 0x01020 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6UL_PAD_CSI_MCLK__I2C1_SDA 0x4001f8b1 + MX6UL_PAD_CSI_PIXCLK__I2C1_SCL 0x4001f8b1 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001f8b1 + MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001f8b1 + >; + }; + + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX6UL_PAD_LCD_DATA00__PWM1_OUT 0x01010 + >; + }; + + pinctrl_pwm2: pwm2grp { + fsl,pins = < + MX6UL_PAD_LCD_DATA01__PWM2_OUT 0x01010 + >; + }; + + pinctrl_pwm3: pwm3grp { + fsl,pins = < + MX6UL_PAD_LCD_DATA02__PWM3_OUT 0x01010 + >; + }; + + pinctrl_pwm4: pwm4grp { + fsl,pins = < + MX6UL_PAD_LCD_DATA03__PWM4_OUT 0x01010 + >; + }; + + pinctrl_pwm5: pwm5grp { + fsl,pins = < + MX6UL_PAD_LCD_DATA18__PWM5_OUT 0x01010 + >; + }; + + pinctrl_pwm6: pwm6grp { + fsl,pins = < + MX6UL_PAD_LCD_DATA19__PWM6_OUT 0x01010 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1 + MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6UL_PAD_LCD_CLK__UART4_DCE_TX 0x1b0b0 + MX6UL_PAD_LCD_ENABLE__UART4_DCE_RX 0x1b0b0 + MX6UL_PAD_LCD_HSYNC__UART4_DCE_CTS 0x1b0b0 + MX6UL_PAD_LCD_VSYNC__UART4_DCE_RTS 0x1b0b0 + MX6UL_PAD_LCD_RESET__GPIO3_IO04 0x1b0b0 + >; + }; + + pinctrl_usbotg1: usbotg1grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO01__USB_OTG1_OC 0x1b0b0 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6UL_PAD_NAND_WP_B__USDHC1_RESET_B 0x17099 + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x1f099 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10099 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17099 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17099 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17099 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17099 + MX6UL_PAD_NAND_READY_B__USDHC1_DATA4 0x17099 + MX6UL_PAD_NAND_CE0_B__USDHC1_DATA5 0x17099 + MX6UL_PAD_NAND_CE1_B__USDHC1_DATA6 0x17099 + MX6UL_PAD_NAND_CLE__USDHC1_DATA7 0x17099 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6UL_PAD_CSI_VSYNC__USDHC2_CLK 0x100b9 + MX6UL_PAD_CSI_HSYNC__USDHC2_CMD 0x170b9 + MX6UL_PAD_CSI_DATA00__USDHC2_DATA0 0x170b9 + MX6UL_PAD_CSI_DATA01__USDHC2_DATA1 0x170b9 + MX6UL_PAD_CSI_DATA02__USDHC2_DATA2 0x170b9 + MX6UL_PAD_CSI_DATA03__USDHC2_DATA3 0x170b9 + >; + }; + + pinctrl_vbus: vbus0grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0x030b0 + >; + }; + + pinctrl_wifi_npd: wifigrp { + fsl,pins = < + /* WL_REG_ON */ + MX6UL_PAD_CSI_DATA04__GPIO4_IO25 0x03020 + >; + }; +}; + +&iomuxc_snvs { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_snvs_hog>; + + pinctrl_snvs_hog: snvs-hog-grp { + fsl,pins = < + /* Digital outputs */ + MX6ULL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x00020 + MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x00020 + MX6ULL_PAD_SNVS_TAMPER4__GPIO5_IO04 0x00020 + MX6ULL_PAD_SNVS_TAMPER5__GPIO5_IO05 0x00020 + MX6ULL_PAD_SNVS_TAMPER6__GPIO5_IO06 0x00020 + + /* Digital outputs fault feedback */ + MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x17000 + MX6ULL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x17000 + MX6ULL_PAD_SNVS_TAMPER7__GPIO5_IO07 0x17000 + MX6ULL_PAD_SNVS_TAMPER8__GPIO5_IO08 0x17000 + MX6ULL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x17000 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6ull-phytec-segin-ff-rdk-nand.dts b/arch/arm/boot/dts/imx6ull-phytec-segin-ff-rdk-nand.dts index c8d3eff9ed4b..1d7362b5ac91 100644 --- a/arch/arm/boot/dts/imx6ull-phytec-segin-ff-rdk-nand.dts +++ b/arch/arm/boot/dts/imx6ull-phytec-segin-ff-rdk-nand.dts @@ -10,6 +10,7 @@ #include "imx6ull-phytec-segin.dtsi" #include "imx6ull-phytec-segin-peb-eval-01.dtsi" #include "imx6ull-phytec-segin-peb-av-02.dtsi" +#include "imx6ull-phytec-segin-peb-wlbt-05.dtsi" / { model = "PHYTEC phyBOARD-Segin i.MX6 ULL Full Featured with NAND"; diff --git a/arch/arm/boot/dts/imx6ull-phytec-segin-lc-rdk-nand.dts b/arch/arm/boot/dts/imx6ull-phytec-segin-lc-rdk-nand.dts index e168494e0a6d..4bcbae024d8d 100644 --- a/arch/arm/boot/dts/imx6ull-phytec-segin-lc-rdk-nand.dts +++ b/arch/arm/boot/dts/imx6ull-phytec-segin-lc-rdk-nand.dts @@ -9,6 +9,7 @@ #include "imx6ull-phytec-phycore-som.dtsi" #include "imx6ull-phytec-segin.dtsi" #include "imx6ull-phytec-segin-peb-eval-01.dtsi" +#include "imx6ull-phytec-segin-peb-wlbt-05.dtsi" / { model = "PHYTEC phyBOARD-Segin i.MX6 ULL Low Cost with NAND"; diff --git a/arch/arm/boot/dts/imx6ull-phytec-segin-peb-wlbt-05.dtsi b/arch/arm/boot/dts/imx6ull-phytec-segin-peb-wlbt-05.dtsi new file mode 100644 index 000000000000..df25814a3371 --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-phytec-segin-peb-wlbt-05.dtsi @@ -0,0 +1,19 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2021 PHYTEC Messtechnik GmbH + * Author: Yunus Bas <y.bas@phytec.de> + */ + +#include "imx6ul-phytec-segin-peb-wlbt-05.dtsi" + +&iomuxc { + /delete-node/ wlgrp; +}; + +&iomuxc_snvs { + pinctrl_wl: wlgrp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x3031 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6ulz-bsh-smm-m2.dts b/arch/arm/boot/dts/imx6ulz-bsh-smm-m2.dts new file mode 100644 index 000000000000..59bcfc9a6b10 --- /dev/null +++ b/arch/arm/boot/dts/imx6ulz-bsh-smm-m2.dts @@ -0,0 +1,146 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (C) 2021 BSH Hausgeraete GmbH + */ + +/dts-v1/; + +#include <dt-bindings/input/input.h> +#include "imx6ulz.dtsi" + +/ { + model = "BSH SMM M2"; + compatible = "bsh,imx6ulz-bsh-smm-m2", "fsl,imx6ull", "fsl,imx6ulz"; + + chosen { + stdout-path = &uart4; + }; + + usdhc2_pwrseq: usdhc2-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpio2 21 GPIO_ACTIVE_LOW>; + }; +}; + +&gpmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpmi_nand>; + nand-on-flash-bbt; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm4330-bt"; + max-speed = <3000000>; + shutdown-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>; + device-wakeup-gpios = <&gpio2 17 GPIO_ACTIVE_HIGH>; + host-wakeup-gpios = <&gpio2 13 GPIO_ACTIVE_HIGH>; + }; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + status = "okay"; +}; + +&usbotg1 { + dr_mode = "peripheral"; + srp-disable; + hnp-disable; + adp-disable; + status = "okay"; +}; + +&usbphy1 { + fsl,tx-d-cal = <106>; +}; + +&usdhc2 { + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wlan>; + bus-width = <4>; + no-1-8-v; + non-removable; + cap-power-off-card; + keep-power-in-suspend; + cap-sdio-irq; + mmc-pwrseq = <&usdhc2_pwrseq>; + status = "okay"; + + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + interrupt-parent = <&gpio1>; + interrupts = <18 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "host-wake"; + }; +}; + +&wdog1 { + status = "okay"; +}; + +&iomuxc { + pinctrl_gpmi_nand: gpmi-nand { + fsl,pins = < + MX6UL_PAD_NAND_CLE__RAWNAND_CLE 0xb0b1 + MX6UL_PAD_NAND_ALE__RAWNAND_ALE 0xb0b1 + MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B 0xb0b1 + MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B 0xb000 + MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B 0xb0b1 + MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B 0xb0b1 + MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B 0xb0b1 + MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00 0xb0b1 + MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01 0xb0b1 + MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02 0xb0b1 + MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03 0xb0b1 + MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04 0xb0b1 + MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05 0xb0b1 + MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06 0xb0b1 + MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07 0xb0b1 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX 0x1b0b1 + MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX 0x1b099 + MX6UL_PAD_UART3_RTS_B__UART3_DCE_RTS 0x1b0b1 + MX6UL_PAD_UART3_CTS_B__UART3_DCE_CTS 0x1b099 + MX6UL_PAD_GPIO1_IO01__GPIO1_IO01 0x79 /* BT_REG_ON */ + MX6UL_PAD_SD1_CLK__GPIO2_IO17 0x100b1 /* BT_DEV_WAKE out */ + MX6UL_PAD_ENET2_TX_EN__GPIO2_IO13 0x1b0b0 /* BT_HOST_WAKE in */ + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6UL_PAD_UART4_TX_DATA__UART4_DCE_TX 0x1b0b1 + MX6UL_PAD_UART4_RX_DATA__UART4_DCE_RX 0x1b0b1 + >; + }; + + pinctrl_wlan: wlangrp { + fsl,pins = < + MX6UL_PAD_CSI_HSYNC__USDHC2_CMD 0x17059 + MX6UL_PAD_CSI_VSYNC__USDHC2_CLK 0x10059 + MX6UL_PAD_CSI_DATA00__USDHC2_DATA0 0x17059 + MX6UL_PAD_CSI_DATA01__USDHC2_DATA1 0x17059 + MX6UL_PAD_CSI_DATA02__USDHC2_DATA2 0x17059 + MX6UL_PAD_CSI_DATA03__USDHC2_DATA3 0x17059 + MX6UL_PAD_SD1_DATA3__GPIO2_IO21 0x79 /* WL_REG_ON */ + MX6UL_PAD_UART2_CTS_B__GPIO1_IO22 0x100b1 /* WL_DEV_WAKE - WiFi_GPIO_4 - WiFi FW UART */ + MX6UL_PAD_UART1_CTS_B__GPIO1_IO18 0x1b0b1 /* WL_HOST_WAKE - WIFI_GPIO_0 - OOB IRQ */ + MX6UL_PAD_ENET1_RX_EN__OSC32K_32K_OUT 0x4001b031 /* OSC 32Khz wifi clk in */ + >; + }; +}; diff --git a/arch/arm/boot/dts/imx7d-remarkable2.dts b/arch/arm/boot/dts/imx7d-remarkable2.dts index 89cbf13097a4..a2a91bfdd98e 100644 --- a/arch/arm/boot/dts/imx7d-remarkable2.dts +++ b/arch/arm/boot/dts/imx7d-remarkable2.dts @@ -34,6 +34,19 @@ startup-delay-us = <150>; }; + reg_digitizer: regulator-digitizer { + compatible = "regulator-fixed"; + regulator-name = "VDD_3V3_DIGITIZER"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&pinctrl_digitizer_reg>; + pinctrl-1 = <&pinctrl_digitizer_reg>; + gpio = <&gpio1 6 GPIO_ACTIVE_HIGH>; + enable-active-high; + startup-delay-us = <100000>; /* 100 ms */ + }; + wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; pinctrl-names = "default"; @@ -51,6 +64,26 @@ assigned-clock-rates = <0>, <32768>; }; +&i2c1 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + wacom_digitizer: digitizer@9 { + compatible = "hid-over-i2c"; + reg = <0x09>; + hid-descr-addr = <0x01>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wacom>; + interrupt-parent = <&gpio1>; + interrupts = <1 IRQ_TYPE_LEVEL_LOW>; + touchscreen-inverted-x; + touchscreen-inverted-y; + vdd-supply = <®_digitizer>; + }; +}; + &snvs_pwrkey { status = "okay"; }; @@ -117,6 +150,25 @@ fsl,ext-reset-output; }; +&iomuxc_lpsr { + pinctrl_digitizer_reg: digitizerreggrp { + fsl,pins = < + /* DIGITIZER_PWR_EN */ + MX7D_PAD_LPSR_GPIO1_IO06__GPIO1_IO6 0x14 + >; + }; + + pinctrl_wacom: wacomgrp { + fsl,pins = < + /*MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5 0x00000014 FWE */ + MX7D_PAD_LPSR_GPIO1_IO04__GPIO1_IO4 0x00000074 /* PDCTB */ + MX7D_PAD_LPSR_GPIO1_IO01__GPIO1_IO1 0x00000034 /* WACOM INT */ + /*MX7D_PAD_LPSR_GPIO1_IO06__GPIO1_IO6 0x00000014 WACOM PWR ENABLE */ + /*MX7D_PAD_LPSR_GPIO1_IO00__GPIO1_IO0 0x00000074 WACOM RESET */ + >; + }; +}; + &iomuxc { pinctrl_brcm_reg: brcmreggrp { fsl,pins = < @@ -125,6 +177,13 @@ >; }; + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX7D_PAD_I2C1_SDA__I2C1_SDA 0x4000007f + MX7D_PAD_I2C1_SCL__I2C1_SCL 0x4000007f + >; + }; + pinctrl_uart1: uart1grp { fsl,pins = < MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX 0x79 diff --git a/arch/arm/boot/dts/imx7s-warp.dts b/arch/arm/boot/dts/imx7s-warp.dts index 569bbd84e371..4f1edef06c92 100644 --- a/arch/arm/boot/dts/imx7s-warp.dts +++ b/arch/arm/boot/dts/imx7s-warp.dts @@ -248,17 +248,17 @@ &mipi_csi { clock-frequency = <166000000>; - fsl,csis-hs-settle = <3>; status = "okay"; - port@0 { - reg = <0>; + ports { + port@0 { + reg = <0>; - mipi_from_sensor: endpoint { - remote-endpoint = <&ov2680_to_mipi>; - data-lanes = <1>; + mipi_from_sensor: endpoint { + remote-endpoint = <&ov2680_to_mipi>; + data-lanes = <1>; + }; }; - }; }; diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi index 1843fc053870..52a9aeecdbb2 100644 --- a/arch/arm/boot/dts/imx7s.dtsi +++ b/arch/arm/boot/dts/imx7s.dtsi @@ -809,8 +809,6 @@ mipi_csi: mipi-csi@30750000 { compatible = "fsl,imx7-mipi-csi2"; reg = <0x30750000 0x10000>; - #address-cells = <1>; - #size-cells = <0>; interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX7D_IPG_ROOT_CLK>, <&clks IMX7D_MIPI_CSI_ROOT_CLK>, @@ -819,18 +817,22 @@ power-domains = <&pgc_mipi_phy>; phy-supply = <®_1p0d>; resets = <&src IMX7_RESET_MIPI_PHY_MRST>; - reset-names = "mrst"; status = "disabled"; - port@0 { - reg = <0>; - }; + ports { + #address-cells = <1>; + #size-cells = <0>; - port@1 { - reg = <1>; + port@0 { + reg = <0>; + }; - mipi_vc0_to_csi_mux: endpoint { - remote-endpoint = <&csi_mux_from_mipi_vc0>; + port@1 { + reg = <1>; + + mipi_vc0_to_csi_mux: endpoint { + remote-endpoint = <&csi_mux_from_mipi_vc0>; + }; }; }; }; diff --git a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts index 043ddd70372f..1f9686c33a84 100644 --- a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts +++ b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts @@ -149,7 +149,7 @@ reg = <5>; label = "dsa"; link = <&switch2port9>; - phy-mode = "rgmii-txid"; + phy-mode = "1000base-x"; fixed-link { speed = <1000>; @@ -211,12 +211,14 @@ reg = <0>; label = "lan6"; phy-handle = <&switch2phy0>; + phy-mode = "sgmii"; }; port@1 { reg = <1>; label = "lan7"; phy-handle = <&switch2phy1>; + phy-mode = "sgmii"; }; port@2 { @@ -252,7 +254,7 @@ switch2port9: port@9 { reg = <9>; label = "dsa"; - phy-mode = "rgmii-txid"; + phy-mode = "1000base-x"; link = <&switch1port5 &switch0port5>; |