ARM: ux500: add an SMP enablement type and move cpu nodes

The "cpus" node cannot be inside the "soc" node, while this
works for the CoreSight blocks, the early boot code will look
for "cpus" directly under the root node, so this is a hard
convention. So move the CPU nodes.

Augment the "reg" property to match what is actually in the
hardware: 0x300 and 0x301 respectively.

Then add an SMP enablement type to be used by the SMP init
code, "ste,dbx500-smp".

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>

1 files changed, 27 insertions, 26 deletions

diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi
index a75f3289e653..b8f81fb418ce 100644
--- a/arch/arm/boot/dts/ste-dbx5x0.dtsi
+++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi
@@ -15,6 +15,33 @@
 #include "skeleton.dtsi"
 
 / {
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "ste,dbx500-smp";
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+				core1 {
+					cpu = <&CPU1>;
+				};
+			};
+		};
+		CPU0: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0x300>;
+		};
+		CPU1: cpu@301 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0x301>;
+		};
+	};
+
 	soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -22,32 +49,6 @@
 		interrupt-parent = <&intc>;
 		ranges;
 
-		cpus {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			cpu-map {
-				cluster0 {
-					core0 {
-						cpu = <&CPU0>;
-					};
-					core1 {
-						cpu = <&CPU1>;
-					};
-				};
-			};
-			CPU0: cpu@0 {
-				device_type = "cpu";
-				compatible = "arm,cortex-a9";
-				reg = <0>;
-			};
-			CPU1: cpu@1 {
-				device_type = "cpu";
-				compatible = "arm,cortex-a9";
-				reg = <1>;
-			};
-		};
-
 		ptm@801ae000 {
 			compatible = "arm,coresight-etm3x", "arm,primecell";
 			reg = <0x801ae000 0x1000>;