Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm

* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (130 commits) [ARM] 3856/1: Add clocksource for Intel IXP4xx platforms [ARM] 3855/1: Add generic time support [ARM] 3873/1: S3C24XX: Add irq_chip names [ARM] 3872/1: S3C24XX: Apply consistant tabbing to irq_chips [ARM] 3871/1: S3C24XX: Fix ordering of EINT4..23 [ARM] nommu: confirms the CR_V bit in nommu mode [ARM] nommu: abort handler fixup for !CPU_CP15_MMU cores. [ARM] 3870/1: AT91: Start removing static memory mappings [ARM] 3869/1: AT91: NAND support for DK and KB9202 boards [ARM] 3868/1: AT91 hardware header update [ARM] 3867/1: AT91 GPIO update [ARM] 3866/1: AT91 clock update [ARM] 3865/1: AT91RM9200 header updates [ARM] 3862/2: S3C2410 - add basic power management support for AML M5900 series [ARM] kthread: switch arch/arm/kernel/apm.c [ARM] Off-by-one in arch/arm/common/icst* [ARM] 3864/1: Refactore sharpsl_pm [ARM] 3863/1: Add Locomo SPI Device [ARM] 3847/2: Convert LOMOMO to use struct device for GPIOs [ARM] Use CPU_CACHE_* where possible in asm/cacheflush.h ...
author: Linus Torvalds <torvalds@g5.osdl.org> 2006-09-28 14:40:39 -0700
committer: Linus Torvalds <torvalds@g5.osdl.org> 2006-09-28 14:40:39 -0700
commit: ebdea46fecae40c4d7effcd33f40918a37a1df4b (patch)
tree: e4312bf7f1f3d184738963a0ec300aa9fdfd55c1 /arch
parent: Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-mmc (diff)
parent: Merge nommu branch (diff)
download: linux-dev-ebdea46fecae40c4d7effcd33f40918a37a1df4b.tar.xz
linux-dev-ebdea46fecae40c4d7effcd33f40918a37a1df4b.zip
174 files changed, 9075 insertions, 7941 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index f81a62380add..f9362ee9955f 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -17,6 +17,10 @@ config ARM
 	  Europe.  There is an ARM Linux project with a web page at
 	  <http://www.arm.linux.org.uk/>.
 
+config GENERIC_TIME
+	bool
+	default n
+
 config MMU
 	bool
 	default y
@@ -51,6 +55,10 @@ config GENERIC_HARDIRQS
 	bool
 	default y
 
+config TRACE_IRQFLAGS_SUPPORT
+	bool
+	default y
+
 config HARDIRQS_SW_RESEND
 	bool
 	default y
@@ -91,7 +99,7 @@ config ARCH_MTD_XIP
 
 config VECTORS_BASE
 	hex
-	default 0xffff0000 if MMU
+	default 0xffff0000 if MMU || CPU_HIGH_VECTOR
 	default DRAM_BASE if REMAP_VECTORS_TO_RAM
 	default 0x00000000
 	help
@@ -198,16 +206,27 @@ config ARCH_IMX
 	help
 	  Support for Motorola's i.MX family of processors (MX1, MXL).
 
-config ARCH_IOP3XX
-	bool "IOP3xx-based"
+config ARCH_IOP32X
+	bool "IOP32x-based"
+	depends on MMU
+	select PLAT_IOP
+	select PCI
+	help
+	  Support for Intel's 80219 and IOP32X (XScale) family of
+	  processors.
+
+config ARCH_IOP33X
+	bool "IOP33x-based"
 	depends on MMU
+	select PLAT_IOP
 	select PCI
 	help
-	  Support for Intel's IOP3XX (XScale) family of processors.
+	  Support for Intel's IOP33X (XScale) family of processors.
 
 config ARCH_IXP4XX
 	bool "IXP4xx-based"
 	depends on MMU
+	select GENERIC_TIME
 	help
 	  Support for Intel's IXP4XX (XScale) family of processors.
 
@@ -308,7 +327,9 @@ source "arch/arm/mach-footbridge/Kconfig"
 
 source "arch/arm/mach-integrator/Kconfig"
 
-source "arch/arm/mach-iop3xx/Kconfig"
+source "arch/arm/mach-iop32x/Kconfig"
+
+source "arch/arm/mach-iop33x/Kconfig"
 
 source "arch/arm/mach-ixp4xx/Kconfig"
 
@@ -348,6 +369,9 @@ source "arch/arm/mach-netx/Kconfig"
 config ARCH_ACORN
 	bool
 
+config PLAT_IOP
+	bool
+
 source arch/arm/mm/Kconfig
 
 #  bool 'Use XScale PMU as timer source' CONFIG_XSCALE_PMU_TIMER
@@ -602,6 +626,7 @@ config LEDS_CPU
 
 config ALIGNMENT_TRAP
 	bool
+	depends on CPU_CP15_MMU
 	default y if !ARCH_EBSA110
 	help
 	  ARM processors can not fetch/store information which is not
@@ -633,11 +658,12 @@ config ZBOOT_ROM_BSS
 	hex "Compressed ROM boot loader BSS address"
 	default "0"
 	help
-	  The base address of 64KiB of read/write memory in the target
-	  for the ROM-able zImage, which must be available while the
-	  decompressor is running.  Platforms which normally make use of
-	  ROM-able zImage formats normally set this to a suitable
-	  value in their defconfig file.
+	  The base address of an area of read/write memory in the target
+	  for the ROM-able zImage which must be available while the
+	  decompressor is running. It must be large enough to hold the
+	  entire decompressed kernel plus an additional 128 KiB.
+	  Platforms which normally make use of ROM-able zImage formats
+	  normally set this to a suitable value in their defconfig file.
 
 	  If ZBOOT_ROM is not enabled, this has no effect.
 
@@ -832,7 +858,7 @@ source "drivers/base/Kconfig"
 
 source "drivers/connector/Kconfig"
 
-if ALIGNMENT_TRAP
+if ALIGNMENT_TRAP || !CPU_CP15_MMU
 source "drivers/mtd/Kconfig"
 endif
 
@@ -844,7 +870,7 @@ source "drivers/block/Kconfig"
 
 source "drivers/acorn/block/Kconfig"
 
-if PCMCIA || ARCH_CLPS7500 || ARCH_IOP3XX || ARCH_IXP4XX \
+if PCMCIA || ARCH_CLPS7500 || ARCH_IOP32X || ARCH_IOP33X || ARCH_IXP4XX \
 	|| ARCH_L7200 || ARCH_LH7A40X || ARCH_PXA || ARCH_RPC \
 	|| ARCH_S3C2410 || ARCH_SA1100 || ARCH_SHARK || FOOTBRIDGE \
 	|| ARCH_IXP23XX
diff --git a/arch/arm/Kconfig-nommu b/arch/arm/Kconfig-nommu
index e1574be2ded6..f087376748d1 100644
--- a/arch/arm/Kconfig-nommu
+++ b/arch/arm/Kconfig-nommu
@@ -25,6 +25,14 @@ config FLASH_SIZE
 	hex 'FLASH Size' if SET_MEM_PARAM
 	default 0x00400000
 
+config PROCESSOR_ID
+	hex
+	default 0x00007700
+	depends on !CPU_CP15
+	help
+	  If processor has no CP15 register, this processor ID is
+	  used instead of the auto-probing which utilizes the register.
+
 config REMAP_VECTORS_TO_RAM
 	bool 'Install vectors to the begining of RAM' if DRAM_BASE
 	depends on DRAM_BASE
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 92873cdee31f..2a0b2c8a1fe0 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -55,7 +55,12 @@ arch-$(CONFIG_CPU_32v3)		:=-D__LINUX_ARM_ARCH__=3 -march=armv3
 # This selects how we optimise for the processor.
 tune-$(CONFIG_CPU_ARM610)	:=-mtune=arm610
 tune-$(CONFIG_CPU_ARM710)	:=-mtune=arm710
+tune-$(CONFIG_CPU_ARM7TDMI)	:=-mtune=arm7tdmi
 tune-$(CONFIG_CPU_ARM720T)	:=-mtune=arm7tdmi
+tune-$(CONFIG_CPU_ARM740T)	:=-mtune=arm7tdmi
+tune-$(CONFIG_CPU_ARM9TDMI)	:=-mtune=arm9tdmi
+tune-$(CONFIG_CPU_ARM940T)	:=-mtune=arm9tdmi
+tune-$(CONFIG_CPU_ARM946T)	:=$(call cc-option,-mtune=arm9e,-mtune=arm9tdmi)
 tune-$(CONFIG_CPU_ARM920T)	:=-mtune=arm9tdmi
 tune-$(CONFIG_CPU_ARM922T)	:=-mtune=arm9tdmi
 tune-$(CONFIG_CPU_ARM925T)	:=-mtune=arm9tdmi
@@ -101,7 +106,8 @@ endif
  machine-$(CONFIG_ARCH_INTEGRATOR) := integrator
  textofs-$(CONFIG_ARCH_CLPS711X)   := 0x00028000
  machine-$(CONFIG_ARCH_CLPS711X)   := clps711x
- machine-$(CONFIG_ARCH_IOP3XX)	   := iop3xx
+ machine-$(CONFIG_ARCH_IOP32X)	   := iop32x
+ machine-$(CONFIG_ARCH_IOP33X)	   := iop33x
  machine-$(CONFIG_ARCH_IXP4XX)	   := ixp4xx
  machine-$(CONFIG_ARCH_IXP2000)    := ixp2000
  machine-$(CONFIG_ARCH_IXP23XX)    := ixp23xx
@@ -157,6 +163,7 @@ core-$(CONFIG_FPE_FASTFPE)	+= $(FASTFPE_OBJ)
 core-$(CONFIG_VFP)		+= arch/arm/vfp/
 
 # If we have a common platform directory, then include it in the build.
+core-$(CONFIG_PLAT_IOP)		+= arch/arm/plat-iop/
 core-$(CONFIG_ARCH_OMAP)	+= arch/arm/plat-omap/
 
 drivers-$(CONFIG_OPROFILE)      += arch/arm/oprofile/
diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile
index 2adc1527e0eb..adddc7131685 100644
--- a/arch/arm/boot/compressed/Makefile
+++ b/arch/arm/boot/compressed/Makefile
@@ -51,7 +51,11 @@ OBJS		+= head-at91rm9200.o
 endif
 
 ifeq ($(CONFIG_CPU_BIG_ENDIAN),y)
+ifeq ($(CONFIG_CPU_CP15),y)
 OBJS		+= big-endian.o
+else
+# The endian should be set by h/w design.
+endif
 endif
 
 #
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index 14a9ff9c68df..e5ab51b9cceb 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -20,11 +20,21 @@
 #ifdef DEBUG
 
 #if defined(CONFIG_DEBUG_ICEDCC)
+
+#ifdef CONFIG_CPU_V6
+		.macro	loadsp, rb
+		.endm
+		.macro	writeb, ch, rb
+		mcr	p14, 0, \ch, c0, c5, 0
+		.endm
+#else
 		.macro	loadsp, rb
 		.endm
 		.macro	writeb, ch, rb
 		mcr	p14, 0, \ch, c0, c1, 0
 		.endm
+#endif
+
 #else
 
 #include <asm/arch/debug-macro.S>
@@ -42,12 +52,6 @@
 		add	\rb, \rb, #0x00010000	@ Ser1
 #endif
 		.endm
-#elif defined(CONFIG_ARCH_IOP331)
-		.macro loadsp, rb
-                mov   	\rb, #0xff000000
-                orr     \rb, \rb, #0x00ff0000
-                orr     \rb, \rb, #0x0000f700   @ location of the UART
-		.endm
 #elif defined(CONFIG_ARCH_S3C2410)
 		.macro loadsp, rb
 		mov	\rb, #0x50000000
@@ -78,9 +82,11 @@
 		kphex	r6, 8		/* processor id */
 		kputc	#':'
 		kphex	r7, 8		/* architecture id */
+#ifdef CONFIG_CPU_CP15
 		kputc	#':'
 		mrc	p15, 0, r0, c1, c0
 		kphex	r0, 8		/* control reg */
+#endif
 		kputc	#'\n'
 		kphex	r5, 8		/* decompressed kernel start */
 		kputc	#'-'
@@ -503,7 +509,11 @@ call_kernel:	bl	cache_clean_flush
  */
 
 call_cache_fn:	adr	r12, proc_types
+#ifdef CONFIG_CPU_CP15
 		mrc	p15, 0, r6, c0, c0	@ get processor ID
+#else
+		ldr	r6, =CONFIG_PROCESSOR_ID
+#endif
 1:		ldr	r1, [r12, #0]		@ get value
 		ldr	r2, [r12, #4]		@ get mask
 		eor	r1, r1, r6		@ (real ^ match)
diff --git a/arch/arm/boot/compressed/misc.c b/arch/arm/boot/compressed/misc.c
index ace3fb5835d9..283891c736c4 100644
--- a/arch/arm/boot/compressed/misc.c
+++ b/arch/arm/boot/compressed/misc.c
@@ -30,6 +30,25 @@ static void putstr(const char *ptr);
 #include <asm/arch/uncompress.h>
 
 #ifdef CONFIG_DEBUG_ICEDCC
+
+#ifdef CONFIG_CPU_V6
+
+static void icedcc_putc(int ch)
+{
+	int status, i = 0x4000000;
+
+	do {
+		if (--i < 0)
+			return;
+
+		asm volatile ("mrc p14, 0, %0, c0, c1, 0" : "=r" (status));
+	} while (status & (1 << 29));
+
+	asm("mcr p14, 0, %0, c0, c5, 0" : : "r" (ch));
+}
+
+#else
+
 static void icedcc_putc(int ch)
 {
 	int status, i = 0x4000000;
@@ -44,6 +63,8 @@ static void icedcc_putc(int ch)
 	asm("mcr p14, 0, %0, c1, c0, 0" : : "r" (ch));
 }
 
+#endif
+
 #define putc(ch)	icedcc_putc(ch)
 #define flush()	do { } while (0)
 #endif
diff --git a/arch/arm/common/icst307.c b/arch/arm/common/icst307.c
index bafe8b19be82..6d094c157540 100644
--- a/arch/arm/common/icst307.c
+++ b/arch/arm/common/icst307.c
@@ -57,7 +57,7 @@ icst307_khz_to_vco(const struct icst307_params *p, unsigned long freq)
 			break;
 	} while (i < ARRAY_SIZE(idx2s));
 
-	if (i > ARRAY_SIZE(idx2s))
+	if (i >= ARRAY_SIZE(idx2s))
 		return vco;
 
 	vco.s = idx2s[i];
@@ -119,7 +119,7 @@ icst307_ps_to_vco(const struct icst307_params *p, unsigned long period)
 			break;
 	} while (i < ARRAY_SIZE(idx2s));
 
-	if (i > ARRAY_SIZE(idx2s))
+	if (i >= ARRAY_SIZE(idx2s))
 		return vco;
 
 	vco.s = idx2s[i];
diff --git a/arch/arm/common/icst525.c b/arch/arm/common/icst525.c
index 943ef88c0379..3d377c5bdef6 100644
--- a/arch/arm/common/icst525.c
+++ b/arch/arm/common/icst525.c
@@ -55,7 +55,7 @@ icst525_khz_to_vco(const struct icst525_params *p, unsigned long freq)
 			break;
 	} while (i < ARRAY_SIZE(idx2s));
 
-	if (i > ARRAY_SIZE(idx2s))
+	if (i >= ARRAY_SIZE(idx2s))
 		return vco;
 
 	vco.s = idx2s[i];
@@ -118,7 +118,7 @@ icst525_ps_to_vco(const struct icst525_params *p, unsigned long period)
 			break;
 	} while (i < ARRAY_SIZE(idx2s));
 
-	if (i > ARRAY_SIZE(idx2s))
+	if (i >= ARRAY_SIZE(idx2s))
 		return vco;
 
 	vco.s = idx2s[i];
diff --git a/arch/arm/common/locomo.c b/arch/arm/common/locomo.c
index 4e0dcaef6eb2..181ef1ead5b8 100644
--- a/arch/arm/common/locomo.c
+++ b/arch/arm/common/locomo.c
@@ -121,6 +121,13 @@ static struct locomo_dev_info locomo_devices[] = {
 		.offset		= 0,
 		.length		= 0,
 	},
+	{
+		.devid		= LOCOMO_DEVID_SPI,
+		.irq		= {},
+		.name		= "locomo-spi",
+		.offset		= LOCOMO_SPI,
+		.length		= 0x30,
+	},
 };
 
 
@@ -374,7 +381,7 @@ static void locomo_spi_handler(unsigned int irq, struct irqdesc *desc,
 	struct irqdesc *d;
 	void __iomem *mapbase = get_irq_chipdata(irq);
 
-	req = locomo_readl(mapbase + LOCOMO_SPIIR) & 0x000F;
+	req = locomo_readl(mapbase + LOCOMO_SPI + LOCOMO_SPIIR) & 0x000F;
 	if (req) {
 		irq = LOCOMO_IRQ_SPI_START;
 		d = irq_desc + irq;
@@ -391,35 +398,35 @@ static void locomo_spi_ack_irq(unsigned int irq)
 {
 	void __iomem *mapbase = get_irq_chipdata(irq);
 	unsigned int r;
-	r = locomo_readl(mapbase + LOCOMO_SPIWE);
+	r = locomo_readl(mapbase + LOCOMO_SPI + LOCOMO_SPIWE);
 	r |= (0x0001 << (irq - LOCOMO_IRQ_SPI_START));
-	locomo_writel(r, mapbase + LOCOMO_SPIWE);
+	locomo_writel(r, mapbase + LOCOMO_SPI + LOCOMO_SPIWE);
 
-	r = locomo_readl(mapbase + LOCOMO_SPIIS);
+	r = locomo_readl(mapbase + LOCOMO_SPI + LOCOMO_SPIIS);
 	r &= ~(0x0001 << (irq - LOCOMO_IRQ_SPI_START));
-	locomo_writel(r, mapbase + LOCOMO_SPIIS);
+	locomo_writel(r, mapbase + LOCOMO_SPI + LOCOMO_SPIIS);
 
-	r = locomo_readl(mapbase + LOCOMO_SPIWE);
+	r = locomo_readl(mapbase + LOCOMO_SPI + LOCOMO_SPIWE);
 	r &= ~(0x0001 << (irq - LOCOMO_IRQ_SPI_START));
-	locomo_writel(r, mapbase + LOCOMO_SPIWE);
+	locomo_writel(r, mapbase + LOCOMO_SPI + LOCOMO_SPIWE);
 }
 
 static void locomo_spi_mask_irq(unsigned int irq)
 {
 	void __iomem *mapbase = get_irq_chipdata(irq);
 	unsigned int r;
-	r = locomo_readl(mapbase + LOCOMO_SPIIE);
+	r = locomo_readl(mapbase + LOCOMO_SPI + LOCOMO_SPIIE);
 	r &= ~(0x0001 << (irq - LOCOMO_IRQ_SPI_START));
-	locomo_writel(r, mapbase + LOCOMO_SPIIE);
+	locomo_writel(r, mapbase + LOCOMO_SPI + LOCOMO_SPIIE);
 }
 
 static void locomo_spi_unmask_irq(unsigned int irq)
 {
 	void __iomem *mapbase = get_irq_chipdata(irq);
 	unsigned int r;
-	r = locomo_readl(mapbase + LOCOMO_SPIIE);
+	r = locomo_readl(mapbase + LOCOMO_SPI + LOCOMO_SPIIE);
 	r |= (0x0001 << (irq - LOCOMO_IRQ_SPI_START));
-	locomo_writel(r, mapbase + LOCOMO_SPIIE);
+	locomo_writel(r, mapbase + LOCOMO_SPI + LOCOMO_SPIIE);
 }
 
 static struct irq_chip locomo_spi_chip = {
@@ -814,12 +821,15 @@ static inline struct locomo *locomo_chip_driver(struct locomo_dev *ldev)
 	return (struct locomo *)dev_get_drvdata(ldev->dev.parent);
 }
 
-void locomo_gpio_set_dir(struct locomo_dev *ldev, unsigned int bits, unsigned int dir)
+void locomo_gpio_set_dir(struct device *dev, unsigned int bits, unsigned int dir)
 {
-	struct locomo *lchip = locomo_chip_driver(ldev);
+	struct locomo *lchip = dev_get_drvdata(dev);
 	unsigned long flags;
 	unsigned int r;
 
+	if (!lchip)
+		return;
+
 	spin_lock_irqsave(&lchip->lock, flags);
 
 	r = locomo_readl(lchip->base + LOCOMO_GPD);
@@ -836,12 +846,15 @@ void locomo_gpio_set_dir(struct locomo_dev *ldev, unsigned int bits, unsigned in
 	spin_unlock_irqrestore(&lchip->lock, flags);
 }
 
-unsigned int locomo_gpio_read_level(struct locomo_dev *ldev, unsigned int bits)
+int locomo_gpio_read_level(struct device *dev, unsigned int bits)
 {
-	struct locomo *lchip = locomo_chip_driver(ldev);
+	struct locomo *lchip = dev_get_drvdata(dev);
 	unsigned long flags;
 	unsigned int ret;
 
+	if (!lchip)
+		return -ENODEV;
+
 	spin_lock_irqsave(&lchip->lock, flags);
 	ret = locomo_readl(lchip->base + LOCOMO_GPL);
 	spin_unlock_irqrestore(&lchip->lock, flags);
@@ -850,12 +863,15 @@ unsigned int locomo_gpio_read_level(struct locomo_dev *ldev, unsigned int bits)
 	return ret;
 }
 
-unsigned int locomo_gpio_read_output(struct locomo_dev *ldev, unsigned int bits)
+int locomo_gpio_read_output(struct device *dev, unsigned int bits)
 {
-	struct locomo *lchip = locomo_chip_driver(ldev);
+	struct locomo *lchip = dev_get_drvdata(dev);
 	unsigned long flags;
 	unsigned int ret;
 
+	if (!lchip)
+		return -ENODEV;
+
 	spin_lock_irqsave(&lchip->lock, flags);
 	ret = locomo_readl(lchip->base + LOCOMO_GPO);
 	spin_unlock_irqrestore(&lchip->lock, flags);
@@ -864,12 +880,15 @@ unsigned int locomo_gpio_read_output(struct locomo_dev *ldev, unsigned int bits)
 	return ret;
 }
 
-void locomo_gpio_write(struct locomo_dev *ldev, unsigned int bits, unsigned int set)
+void locomo_gpio_write(struct device *dev, unsigned int bits, unsigned int set)
 {
-	struct locomo *lchip = locomo_chip_driver(ldev);
+	struct locomo *lchip = dev_get_drvdata(dev);
 	unsigned long flags;
 	unsigned int r;
 
+	if (!lchip)
+		return;
+
 	spin_lock_irqsave(&lchip->lock, flags);
 
 	r = locomo_readl(lchip->base + LOCOMO_GPO);
@@ -1058,9 +1077,9 @@ void locomo_frontlight_set(struct locomo_dev *dev, int duty, int vr, int bpwf)
 	struct locomo *lchip = locomo_chip_driver(dev);
 
 	if (vr)
-		locomo_gpio_write(dev, LOCOMO_GPIO_FL_VR, 1);
+		locomo_gpio_write(dev->dev.parent, LOCOMO_GPIO_FL_VR, 1);
 	else
-		locomo_gpio_write(dev, LOCOMO_GPIO_FL_VR, 0);
+		locomo_gpio_write(dev->dev.parent, LOCOMO_GPIO_FL_VR, 0);
 
 	spin_lock_irqsave(&lchip->lock, flags);
 	locomo_writel(bpwf, lchip->base + LOCOMO_FRONTLIGHT + LOCOMO_ALS);
diff --git a/arch/arm/common/sharpsl_pm.c b/arch/arm/common/sharpsl_pm.c
index 59b5ddec480f..f412dedda684 100644
--- a/arch/arm/common/sharpsl_pm.c
+++ b/arch/arm/common/sharpsl_pm.c
@@ -40,6 +40,7 @@
 #define SHARPSL_CHARGE_FINISH_TIME             (msecs_to_jiffies(10*60*1000)) /* 10 min */
 #define SHARPSL_BATCHK_TIME                    (msecs_to_jiffies(15*1000))    /* 15 sec */
 #define SHARPSL_BATCHK_TIME_SUSPEND            (60*10)                        /* 10 min */
+
 #define SHARPSL_WAIT_CO_TIME                   15  /* 15 sec */
 #define SHARPSL_WAIT_DISCHARGE_ON              100 /* 100 msec */
 #define SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP   10  /* 10 msec */
@@ -575,6 +576,9 @@ static int corgi_pxa_pm_enter(suspend_state_t state)
 	while (corgi_enter_suspend(alarm_time,alarm_status,state))
 		{}
 
+	if (sharpsl_pm.machinfo->earlyresume)
+		sharpsl_pm.machinfo->earlyresume();
+
 	dev_dbg(sharpsl_pm.dev, "SharpSL resuming...\n");
 
 	return 0;
diff --git a/arch/arm/configs/ep93xx_defconfig b/arch/arm/configs/ep93xx_defconfig
index 2948b4589a8b..3b4802a849e4 100644
--- a/arch/arm/configs/ep93xx_defconfig
+++ b/arch/arm/configs/ep93xx_defconfig
@@ -126,6 +126,7 @@ CONFIG_CRUNCH=y
 # EP93xx Platforms
 #
 CONFIG_MACH_EDB9302=y
+CONFIG_MACH_EDB9312=y
 CONFIG_MACH_EDB9315=y
 CONFIG_MACH_EDB9315A=y
 CONFIG_MACH_GESBC9312=y
diff --git a/arch/arm/configs/ep80219_defconfig b/arch/arm/configs/iop32x_defconfig
index 3c73b707c2f3..0d67f66e78c2 100644
--- a/arch/arm/configs/ep80219_defconfig
+++ b/arch/arm/configs/iop32x_defconfig
@@ -1,50 +1,63 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Sun Mar 27 22:34:12 2005
+# Linux kernel version: 2.6.18-rc7
+# Tue Sep 19 00:30:18 2006
 #
 CONFIG_ARM=y
 CONFIG_MMU=y
-CONFIG_UID16=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # Code maturity level options
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 
 #
 # General setup
 #
 CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 # CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
+# CONFIG_RELAY is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_UID16=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 # CONFIG_EMBEDDED is not set
 CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
 
 #
 # Loadable module support
@@ -52,24 +65,52 @@ CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
 
 #
+# Block layer
+#
+# CONFIG_BLK_DEV_IO_TRACE is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+
+#
 # System Type
 #
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
 # CONFIG_ARCH_CLPS7500 is not set
 # CONFIG_ARCH_CLPS711X is not set
 # CONFIG_ARCH_CO285 is not set
 # CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-CONFIG_ARCH_IOP3XX=y
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+CONFIG_ARCH_IOP32X=y
+# CONFIG_ARCH_IOP33X is not set
 # CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP23XX is not set
 # CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
@@ -77,28 +118,19 @@ CONFIG_ARCH_IOP3XX=y
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
 # CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
 
 #
-# IOP3xx Implementation Options
+# IOP32x Implementation Options
 #
 
 #
-# IOP3xx Platform Types
+# IOP32x Platform Types
 #
-# CONFIG_ARCH_IQ80321 is not set
+CONFIG_MACH_GLANTANK=y
+CONFIG_ARCH_IQ80321=y
 CONFIG_ARCH_IQ31244=y
-# CONFIG_ARCH_IQ80331 is not set
-# CONFIG_MACH_IQ80332 is not set
-CONFIG_ARCH_EP80219=y
-CONFIG_ARCH_IOP321=y
-# CONFIG_ARCH_IOP331 is not set
-
-#
-# IOP3xx Chipset Features
-#
+CONFIG_MACH_N2100=y
+CONFIG_PLAT_IOP=y
 
 #
 # Processor Type
@@ -109,7 +141,6 @@ CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5T=y
 CONFIG_CPU_CACHE_VIVT=y
 CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_MINICACHE=y
 
 #
 # Processor Features
@@ -121,8 +152,7 @@ CONFIG_XSCALE_PMU=y
 # Bus support
 #
 CONFIG_PCI=y
-# CONFIG_PCI_LEGACY_PROC is not set
-CONFIG_PCI_NAMES=y
+# CONFIG_PCI_DEBUG is not set
 
 #
 # PCCARD (PCMCIA/CardBus) support
@@ -133,6 +163,19 @@ CONFIG_PCI_NAMES=y
 # Kernel Features
 #
 # CONFIG_PREEMPT is not set
+# CONFIG_NO_IDLE_HZ is not set
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
 CONFIG_ALIGNMENT_TRAP=y
 
 #
@@ -140,7 +183,7 @@ CONFIG_ALIGNMENT_TRAP=y
 #
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="ip=boot root=nfs console=ttyS0,115200"
+CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp"
 # CONFIG_XIP_KERNEL is not set
 
 #
@@ -166,6 +209,93 @@ CONFIG_BINFMT_AOUT=y
 # Power management options
 #
 # CONFIG_PM is not set
+# CONFIG_APM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
 
 #
 # Device Drivers
@@ -177,6 +307,13 @@ CONFIG_BINFMT_AOUT=y
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
 
 #
 # Memory Technology Devices (MTD)
@@ -200,6 +337,7 @@ CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set
 # CONFIG_NFTL is not set
 # CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -225,18 +363,18 @@ CONFIG_MTD_CFI_UTIL=y
 # CONFIG_MTD_RAM is not set
 # CONFIG_MTD_ROM is not set
 # CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
 
 #
 # Mapping drivers for chip access
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0xf0000000
-CONFIG_MTD_PHYSMAP_LEN=0x00800000
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+CONFIG_MTD_PHYSMAP_START=0x0
+CONFIG_MTD_PHYSMAP_LEN=0x0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=1
 # CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_EDB7312 is not set
+# CONFIG_MTD_PLATRAM is not set
 
 #
 # Self-contained MTD device drivers
@@ -245,7 +383,6 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
 # CONFIG_MTD_BLOCK2MTD is not set
 
 #
@@ -261,6 +398,11 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
 # CONFIG_MTD_NAND is not set
 
 #
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
 # Parallel port support
 #
 # CONFIG_PARPORT is not set
@@ -272,7 +414,6 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
 #
 # Block devices
 #
-# CONFIG_BLK_DEV_FD is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -284,17 +425,9 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_INITRAMFS_SOURCE=""
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 # CONFIG_ATA_OVER_ETH is not set
 
 #
@@ -305,6 +438,7 @@ CONFIG_IOSCHED_CFQ=y
 #
 # SCSI device support
 #
+# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
 CONFIG_SCSI_PROC_FS=y
 
@@ -316,6 +450,7 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_CHR_DEV_OSST is not set
 # CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
 
 #
 # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
@@ -330,10 +465,12 @@ CONFIG_CHR_DEV_SG=y
 # CONFIG_SCSI_SPI_ATTRS is not set
 # CONFIG_SCSI_FC_ATTRS is not set
 # CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
 
 #
 # SCSI low-level drivers
 #
+# CONFIG_ISCSI_TCP is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -344,25 +481,19 @@ CONFIG_CHR_DEV_SG=y
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_LPFC is not set
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
@@ -377,8 +508,7 @@ CONFIG_BLK_DEV_MD=y
 CONFIG_MD_RAID0=y
 CONFIG_MD_RAID1=y
 # CONFIG_MD_RAID10 is not set
-CONFIG_MD_RAID5=y
-# CONFIG_MD_RAID6 is not set
+# CONFIG_MD_RAID456 is not set
 # CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=y
@@ -392,6 +522,9 @@ CONFIG_BLK_DEV_DM=y
 # Fusion MPT device support
 #
 # CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -404,71 +537,8 @@ CONFIG_BLK_DEV_DM=y
 # CONFIG_I2O is not set
 
 #
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
+# Network device support
 #
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
@@ -481,14 +551,21 @@ CONFIG_NETDEVICES=y
 # CONFIG_ARCNET is not set
 
 #
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
 # Ethernet (10 or 100Mbit)
 #
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
 
 #
 # Tulip family network device support
@@ -526,16 +603,23 @@ CONFIG_E1000_NAPI=y
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
+CONFIG_R8169=y
+# CONFIG_R8169_NAPI is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
 
 #
 # Ethernet (10000 Mbit)
 #
+# CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
 
 #
 # Token Ring devices
@@ -558,6 +642,8 @@ CONFIG_E1000_NAPI=y
 # CONFIG_NET_FC is not set
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 
 #
 # ISDN subsystem
@@ -595,7 +681,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 #
 # CONFIG_SERIO is not set
 # CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
 
 #
 # Character devices
@@ -603,6 +688,7 @@ CONFIG_SOUND_GAMEPORT=y
 CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -610,7 +696,9 @@ CONFIG_HW_CONSOLE=y
 #
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
 CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_8250_EXTENDED is not set
 
 #
@@ -618,6 +706,7 @@ CONFIG_SERIAL_8250_NR_UARTS=4
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -631,8 +720,8 @@ CONFIG_LEGACY_PTY_COUNT=256
 # Watchdog Cards
 #
 # CONFIG_WATCHDOG is not set
+CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
@@ -647,6 +736,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -671,14 +761,13 @@ CONFIG_I2C_CHARDEV=y
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
 # CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
 CONFIG_I2C_IOP3XX=y
-# CONFIG_I2C_ISA is not set
 # CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PIIX4 is not set
 # CONFIG_I2C_PROSAVAGE is not set
 # CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_SCx200_ACB is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
@@ -689,15 +778,45 @@ CONFIG_I2C_IOP3XX=y
 # CONFIG_I2C_PCA_ISA is not set
 
 #
-# Hardware Sensors Chip support
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
 #
-# CONFIG_I2C_SENSOR is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
 # CONFIG_SENSORS_ADM1026 is not set
 # CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
 # CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_FSCHER is not set
 # CONFIG_SENSORS_FSCPOS is not set
 # CONFIG_SENSORS_GL518SM is not set
@@ -712,36 +831,45 @@ CONFIG_I2C_IOP3XX=y
 # CONFIG_SENSORS_LM85 is not set
 # CONFIG_SENSORS_LM87 is not set
 # CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT8231 is not set
 # CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
 # CONFIG_SENSORS_W83L785TS is not set
 # CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
 
 #
-# Other I2C Chip support
+# Misc devices
 #
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 
 #
-# Misc devices
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
 #
 
 #
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -751,6 +879,7 @@ CONFIG_I2C_IOP3XX=y
 #
 # Graphics support
 #
+CONFIG_FIRMWARE_EDID=y
 # CONFIG_FB is not set
 
 #
@@ -758,6 +887,7 @@ CONFIG_I2C_IOP3XX=y
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -769,7 +899,125 @@ CONFIG_DUMMY_CONSOLE=y
 #
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB is not set
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_SPLIT_ISO=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_EHCI_TT_NEWSCHED=y
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+CONFIG_USB_UHCI_HCD=y
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_TOUCHSCREEN is not set
+# CONFIG_USB_YEALINK is not set
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGETKIT is not set
+# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+
+#
+# USB DSL modem support
+#
 
 #
 # USB Gadget Support
@@ -782,10 +1030,17 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_MMC is not set
 
 #
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
@@ -795,22 +1050,22 @@ CONFIG_JBD=y
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
+# CONFIG_FS_POSIX_ACL is not set
 CONFIG_XFS_FS=y
-CONFIG_XFS_EXPORT=y
-# CONFIG_XFS_RT is not set
 # CONFIG_XFS_QUOTA is not set
 CONFIG_XFS_SECURITY=y
 CONFIG_XFS_POSIX_ACL=y
+# CONFIG_XFS_RT is not set
+# CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
 
 #
 # CD-ROM/DVD Filesystems
@@ -830,12 +1085,10 @@ CONFIG_DNOTIFY=y
 #
 CONFIG_PROC_FS=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -850,8 +1103,9 @@ CONFIG_RAMFS=y
 # CONFIG_JFFS_FS is not set
 CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_NAND is not set
-# CONFIG_JFFS2_FS_NOR_ECC is not set
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
 # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
 CONFIG_JFFS2_ZLIB=y
 CONFIG_JFFS2_RTIME=y
@@ -868,16 +1122,19 @@ CONFIG_JFFS2_RTIME=y
 #
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
 # CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=y
 CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
 # CONFIG_NFSD_TCP is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -886,6 +1143,7 @@ CONFIG_SUNRPC=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -905,6 +1163,7 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_SGI_PARTITION is not set
 # CONFIG_ULTRIX_PARTITION is not set
 # CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
 # CONFIG_EFI_PARTITION is not set
 
 #
@@ -921,11 +1180,34 @@ CONFIG_MSDOS_PARTITION=y
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
-# CONFIG_DEBUG_KERNEL is not set
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_KERNEL=y
 CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_RWSEMS is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
 CONFIG_FRAME_POINTER=y
+# CONFIG_UNWIND_INFO is not set
+# CONFIG_FORCED_INLINING is not set
+# CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_DEBUG_USER=y
+# CONFIG_DEBUG_WAITQ is not set
+# CONFIG_DEBUG_ERRORS is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
 
 #
 # Security options
@@ -946,7 +1228,9 @@ CONFIG_DEBUG_USER=y
 # Library routines
 #
 # CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
 CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
diff --git a/arch/arm/configs/iq80332_defconfig b/arch/arm/configs/iop33x_defconfig
index 11959b705d82..2a8fc153969d 100644
--- a/arch/arm/configs/iq80332_defconfig
+++ b/arch/arm/configs/iop33x_defconfig
@@ -1,50 +1,63 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Sun Mar 27 17:33:39 2005
+# Linux kernel version: 2.6.18-rc7
+# Tue Sep 19 00:30:42 2006
 #
 CONFIG_ARM=y
 CONFIG_MMU=y
-CONFIG_UID16=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # Code maturity level options
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 
 #
 # General setup
 #
 CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 # CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
+# CONFIG_RELAY is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_UID16=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 # CONFIG_EMBEDDED is not set
 CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
 
 #
 # Loadable module support
@@ -52,24 +65,52 @@ CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
 
 #
+# Block layer
+#
+# CONFIG_BLK_DEV_IO_TRACE is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+
+#
 # System Type
 #
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
 # CONFIG_ARCH_CLPS7500 is not set
 # CONFIG_ARCH_CLPS711X is not set
 # CONFIG_ARCH_CO285 is not set
 # CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-CONFIG_ARCH_IOP3XX=y
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP32X is not set
+CONFIG_ARCH_IOP33X=y
 # CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP23XX is not set
 # CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
@@ -77,28 +118,17 @@ CONFIG_ARCH_IOP3XX=y
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
 # CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
 
 #
-# IOP3xx Implementation Options
+# IOP33x Implementation Options
 #
 
 #
-# IOP3xx Platform Types
+# IOP33x Platform Types
 #
-# CONFIG_ARCH_IQ80321 is not set
-# CONFIG_ARCH_IQ31244 is not set
-# CONFIG_ARCH_IQ80331 is not set
+CONFIG_ARCH_IQ80331=y
 CONFIG_MACH_IQ80332=y
-# CONFIG_ARCH_EP80219 is not set
-CONFIG_ARCH_IOP331=y
-
-#
-# IOP3xx Chipset Features
-#
-# CONFIG_IOP331_STEPD is not set
+CONFIG_PLAT_IOP=y
 
 #
 # Processor Type
@@ -109,7 +139,6 @@ CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5T=y
 CONFIG_CPU_CACHE_VIVT=y
 CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_MINICACHE=y
 
 #
 # Processor Features
@@ -121,8 +150,7 @@ CONFIG_XSCALE_PMU=y
 # Bus support
 #
 CONFIG_PCI=y
-# CONFIG_PCI_LEGACY_PROC is not set
-CONFIG_PCI_NAMES=y
+# CONFIG_PCI_DEBUG is not set
 
 #
 # PCCARD (PCMCIA/CardBus) support
@@ -133,6 +161,19 @@ CONFIG_PCI_NAMES=y
 # Kernel Features
 #
 # CONFIG_PREEMPT is not set
+# CONFIG_NO_IDLE_HZ is not set
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
 CONFIG_ALIGNMENT_TRAP=y
 
 #
@@ -140,7 +181,7 @@ CONFIG_ALIGNMENT_TRAP=y
 #
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="ip=boot root=nfs console=ttyS0,115200"
+CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp"
 # CONFIG_XIP_KERNEL is not set
 
 #
@@ -166,6 +207,93 @@ CONFIG_BINFMT_AOUT=y
 # Power management options
 #
 # CONFIG_PM is not set
+# CONFIG_APM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
 
 #
 # Device Drivers
@@ -177,6 +305,13 @@ CONFIG_BINFMT_AOUT=y
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
 
 #
 # Memory Technology Devices (MTD)
@@ -200,6 +335,7 @@ CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set
 # CONFIG_NFTL is not set
 # CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -222,6 +358,7 @@ CONFIG_MTD_CFI_I1=y
 CONFIG_MTD_CFI_I2=y
 # CONFIG_MTD_CFI_I4 is not set
 # CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
 CONFIG_MTD_CFI_INTELEXT=y
 # CONFIG_MTD_CFI_AMDSTD is not set
 # CONFIG_MTD_CFI_STAA is not set
@@ -229,18 +366,18 @@ CONFIG_MTD_CFI_UTIL=y
 # CONFIG_MTD_RAM is not set
 # CONFIG_MTD_ROM is not set
 # CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
 
 #
 # Mapping drivers for chip access
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0xc0000000
-CONFIG_MTD_PHYSMAP_LEN=0x00800000
+CONFIG_MTD_PHYSMAP_START=0x0
+CONFIG_MTD_PHYSMAP_LEN=0x0
 CONFIG_MTD_PHYSMAP_BANKWIDTH=1
 # CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_EDB7312 is not set
+# CONFIG_MTD_PLATRAM is not set
 
 #
 # Self-contained MTD device drivers
@@ -249,7 +386,6 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=1
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
 # CONFIG_MTD_BLOCK2MTD is not set
 
 #
@@ -265,6 +401,11 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=1
 # CONFIG_MTD_NAND is not set
 
 #
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
 # Parallel port support
 #
 # CONFIG_PARPORT is not set
@@ -276,7 +417,6 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=1
 #
 # Block devices
 #
-# CONFIG_BLK_DEV_FD is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -288,17 +428,9 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=1
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_INITRAMFS_SOURCE=""
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 # CONFIG_ATA_OVER_ETH is not set
 
 #
@@ -309,6 +441,7 @@ CONFIG_IOSCHED_CFQ=y
 #
 # SCSI device support
 #
+# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
 CONFIG_SCSI_PROC_FS=y
 
@@ -320,6 +453,7 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_CHR_DEV_OSST is not set
 # CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
 
 #
 # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
@@ -334,10 +468,12 @@ CONFIG_CHR_DEV_SG=y
 # CONFIG_SCSI_SPI_ATTRS is not set
 # CONFIG_SCSI_FC_ATTRS is not set
 # CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
 
 #
 # SCSI low-level drivers
 #
+# CONFIG_ISCSI_TCP is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -348,25 +484,19 @@ CONFIG_CHR_DEV_SG=y
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_LPFC is not set
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
@@ -381,8 +511,7 @@ CONFIG_MD_LINEAR=y
 CONFIG_MD_RAID0=y
 CONFIG_MD_RAID1=y
 # CONFIG_MD_RAID10 is not set
-CONFIG_MD_RAID5=y
-# CONFIG_MD_RAID6 is not set
+# CONFIG_MD_RAID456 is not set
 # CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=y
@@ -396,6 +525,9 @@ CONFIG_BLK_DEV_DM=y
 # Fusion MPT device support
 #
 # CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -408,71 +540,8 @@ CONFIG_BLK_DEV_DM=y
 # CONFIG_I2O is not set
 
 #
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
+# Network device support
 #
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
@@ -485,6 +554,10 @@ CONFIG_NETDEVICES=y
 # CONFIG_ARCNET is not set
 
 #
+# PHY device support
+#
+
+#
 # Ethernet (10 or 100Mbit)
 #
 # CONFIG_NET_ETHERNET is not set
@@ -501,14 +574,20 @@ CONFIG_E1000_NAPI=y
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
 
 #
 # Ethernet (10000 Mbit)
 #
+# CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
 
 #
 # Token Ring devices
@@ -531,6 +610,8 @@ CONFIG_E1000_NAPI=y
 # CONFIG_NET_FC is not set
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 
 #
 # ISDN subsystem
@@ -568,7 +649,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 #
 # CONFIG_SERIO is not set
 # CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
 
 #
 # Character devices
@@ -576,6 +656,7 @@ CONFIG_SOUND_GAMEPORT=y
 CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -583,7 +664,9 @@ CONFIG_HW_CONSOLE=y
 #
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
 CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_8250_EXTENDED is not set
 
 #
@@ -591,6 +674,7 @@ CONFIG_SERIAL_8250_NR_UARTS=4
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -604,8 +688,8 @@ CONFIG_LEGACY_PTY_COUNT=256
 # Watchdog Cards
 #
 # CONFIG_WATCHDOG is not set
+CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
@@ -620,6 +704,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -644,14 +729,13 @@ CONFIG_I2C_CHARDEV=y
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
 # CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
 CONFIG_I2C_IOP3XX=y
-# CONFIG_I2C_ISA is not set
 # CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PIIX4 is not set
 # CONFIG_I2C_PROSAVAGE is not set
 # CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_SCx200_ACB is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
@@ -662,15 +746,45 @@ CONFIG_I2C_IOP3XX=y
 # CONFIG_I2C_PCA_ISA is not set
 
 #
-# Hardware Sensors Chip support
+# Miscellaneous I2C Chip support
 #
-# CONFIG_I2C_SENSOR is not set
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
 # CONFIG_SENSORS_ADM1026 is not set
 # CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
 # CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_FSCHER is not set
 # CONFIG_SENSORS_FSCPOS is not set
 # CONFIG_SENSORS_GL518SM is not set
@@ -685,36 +799,45 @@ CONFIG_I2C_IOP3XX=y
 # CONFIG_SENSORS_LM85 is not set
 # CONFIG_SENSORS_LM87 is not set
 # CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT8231 is not set
 # CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
 # CONFIG_SENSORS_W83L785TS is not set
 # CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
 
 #
-# Other I2C Chip support
+# Misc devices
 #
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 
 #
-# Misc devices
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
 #
 
 #
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -724,6 +847,7 @@ CONFIG_I2C_IOP3XX=y
 #
 # Graphics support
 #
+CONFIG_FIRMWARE_EDID=y
 # CONFIG_FB is not set
 
 #
@@ -731,6 +855,7 @@ CONFIG_I2C_IOP3XX=y
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -742,9 +867,14 @@ CONFIG_DUMMY_CONSOLE=y
 #
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
 
 #
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
 # USB Gadget Support
 #
 # CONFIG_USB_GADGET is not set
@@ -755,10 +885,17 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_MMC is not set
 
 #
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
@@ -768,22 +905,22 @@ CONFIG_JBD=y
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
+# CONFIG_FS_POSIX_ACL is not set
 CONFIG_XFS_FS=y
-CONFIG_XFS_EXPORT=y
-# CONFIG_XFS_RT is not set
 # CONFIG_XFS_QUOTA is not set
 CONFIG_XFS_SECURITY=y
 CONFIG_XFS_POSIX_ACL=y
+# CONFIG_XFS_RT is not set
+# CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
 
 #
 # CD-ROM/DVD Filesystems
@@ -803,12 +940,10 @@ CONFIG_DNOTIFY=y
 #
 CONFIG_PROC_FS=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -834,16 +969,19 @@ CONFIG_RAMFS=y
 #
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
 # CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=y
 CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
 # CONFIG_NFSD_TCP is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -852,6 +990,7 @@ CONFIG_SUNRPC=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -871,6 +1010,7 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_SGI_PARTITION is not set
 # CONFIG_ULTRIX_PARTITION is not set
 # CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
 # CONFIG_EFI_PARTITION is not set
 
 #
@@ -887,11 +1027,34 @@ CONFIG_MSDOS_PARTITION=y
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
-# CONFIG_DEBUG_KERNEL is not set
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_KERNEL=y
 CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_RWSEMS is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
 CONFIG_FRAME_POINTER=y
+# CONFIG_UNWIND_INFO is not set
+# CONFIG_FORCED_INLINING is not set
+# CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_DEBUG_USER=y
+# CONFIG_DEBUG_WAITQ is not set
+# CONFIG_DEBUG_ERRORS is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
 
 #
 # Security options
@@ -912,5 +1075,7 @@ CONFIG_DEBUG_USER=y
 # Library routines
 #
 # CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
 # CONFIG_CRC32 is not set
 # CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
diff --git a/arch/arm/configs/iq31244_defconfig b/arch/arm/configs/iq31244_defconfig
deleted file mode 100644
index 32467160a6df..000000000000
--- a/arch/arm/configs/iq31244_defconfig
+++ /dev/null
@@ -1,922 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Sun Mar 27 02:10:38 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-CONFIG_ARCH_IOP3XX=y
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-
-#
-# IOP3xx Implementation Options
-#
-
-#
-# IOP3xx Platform Types
-#
-# CONFIG_ARCH_IQ80321 is not set
-CONFIG_ARCH_IQ31244=y
-# CONFIG_ARCH_IQ80331 is not set
-# CONFIG_MACH_IQ80332 is not set
-# CONFIG_ARCH_EP80219 is not set
-CONFIG_ARCH_IOP321=y
-# CONFIG_ARCH_IOP331 is not set
-
-#
-# IOP3xx Chipset Features
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_MINICACHE=y
-
-#
-# Processor Features
-#
-# CONFIG_ARM_THUMB is not set
-CONFIG_XSCALE_PMU=y
-
-#
-# Bus support
-#
-CONFIG_PCI=y
-# CONFIG_PCI_LEGACY_PROC is not set
-CONFIG_PCI_NAMES=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="ip=boot root=nfs console=ttyS0,115200"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_AOUT=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
-CONFIG_MTD_REDBOOT_PARTS_READONLY=y
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0xf0000000
-CONFIG_MTD_PHYSMAP_LEN=0x00800000
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_EDB7312 is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-CONFIG_CHR_DEV_SG=y
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=y
-# CONFIG_MD_LINEAR is not set
-CONFIG_MD_RAID0=y
-CONFIG_MD_RAID1=y
-# CONFIG_MD_RAID10 is not set
-CONFIG_MD_RAID5=y
-# CONFIG_MD_RAID6 is not set
-# CONFIG_MD_MULTIPATH is not set
-# CONFIG_MD_FAULTY is not set
-CONFIG_BLK_DEV_DM=y
-# CONFIG_DM_CRYPT is not set
-# CONFIG_DM_SNAPSHOT is not set
-# CONFIG_DM_MIRROR is not set
-# CONFIG_DM_ZERO is not set
-# CONFIG_DM_MULTIPATH is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-# CONFIG_NET_ETHERNET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-CONFIG_E1000=y
-CONFIG_E1000_NAPI=y
-# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-CONFIG_I2C_IOP3XX=y
-# CONFIG_I2C_ISA is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_SCx200_ACB is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Hardware Sensors Chip support
-#
-# CONFIG_I2C_SENSOR is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-
-#
-# Other I2C Chip support
-#
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-CONFIG_XFS_FS=y
-CONFIG_XFS_EXPORT=y
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_QUOTA is not set
-CONFIG_XFS_SECURITY=y
-CONFIG_XFS_POSIX_ACL=y
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_NAND is not set
-# CONFIG_JFFS2_FS_NOR_ECC is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-CONFIG_NFSD=y
-CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V4 is not set
-# CONFIG_NFSD_TCP is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_FRAME_POINTER=y
-CONFIG_DEBUG_USER=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/arm/configs/iq80321_defconfig b/arch/arm/configs/iq80321_defconfig
deleted file mode 100644
index b000da753c41..000000000000
--- a/arch/arm/configs/iq80321_defconfig
+++ /dev/null
@@ -1,843 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Sun Mar 27 13:24:10 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-CONFIG_ARCH_IOP3XX=y
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-
-#
-# IOP3xx Implementation Options
-#
-
-#
-# IOP3xx Platform Types
-#
-CONFIG_ARCH_IQ80321=y
-# CONFIG_ARCH_IQ31244 is not set
-# CONFIG_ARCH_IQ80331 is not set
-# CONFIG_MACH_IQ80332 is not set
-# CONFIG_ARCH_EP80219 is not set
-CONFIG_ARCH_IOP321=y
-# CONFIG_ARCH_IOP331 is not set
-
-#
-# IOP3xx Chipset Features
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_MINICACHE=y
-
-#
-# Processor Features
-#
-# CONFIG_ARM_THUMB is not set
-CONFIG_XSCALE_PMU=y
-
-#
-# Bus support
-#
-CONFIG_PCI=y
-# CONFIG_PCI_LEGACY_PROC is not set
-CONFIG_PCI_NAMES=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="ip=boot root=nfs console=ttyS0,115200"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_AOUT=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
-CONFIG_MTD_REDBOOT_PARTS_READONLY=y
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0xf0000000
-CONFIG_MTD_PHYSMAP_LEN=0x00800000
-CONFIG_MTD_PHYSMAP_BANKWIDTH=1
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_EDB7312 is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-# CONFIG_NET_ETHERNET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-CONFIG_E1000=y
-CONFIG_E1000_NAPI=y
-# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-CONFIG_I2C_IOP3XX=y
-# CONFIG_I2C_ISA is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_SCx200_ACB is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Hardware Sensors Chip support
-#
-# CONFIG_I2C_SENSOR is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-
-#
-# Other I2C Chip support
-#
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-CONFIG_XFS_FS=y
-CONFIG_XFS_EXPORT=y
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_QUOTA is not set
-CONFIG_XFS_SECURITY=y
-CONFIG_XFS_POSIX_ACL=y
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_NAND is not set
-# CONFIG_JFFS2_FS_NOR_ECC is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-CONFIG_NFSD=y
-CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V4 is not set
-# CONFIG_NFSD_TCP is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_FRAME_POINTER=y
-CONFIG_DEBUG_USER=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/arm/configs/iq80331_defconfig b/arch/arm/configs/iq80331_defconfig
deleted file mode 100644
index 46c79e1efe07..000000000000
--- a/arch/arm/configs/iq80331_defconfig
+++ /dev/null
@@ -1,916 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Sun Mar 27 15:13:37 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-CONFIG_ARCH_IOP3XX=y
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-
-#
-# IOP3xx Implementation Options
-#
-
-#
-# IOP3xx Platform Types
-#
-# CONFIG_ARCH_IQ80321 is not set
-# CONFIG_ARCH_IQ31244 is not set
-CONFIG_ARCH_IQ80331=y
-# CONFIG_MACH_IQ80332 is not set
-# CONFIG_ARCH_EP80219 is not set
-CONFIG_ARCH_IOP331=y
-
-#
-# IOP3xx Chipset Features
-#
-CONFIG_IOP331_STEPD=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_MINICACHE=y
-
-#
-# Processor Features
-#
-# CONFIG_ARM_THUMB is not set
-CONFIG_XSCALE_PMU=y
-
-#
-# Bus support
-#
-CONFIG_PCI=y
-# CONFIG_PCI_LEGACY_PROC is not set
-CONFIG_PCI_NAMES=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="ip=boot root=nfs console=ttyS0,115200"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_AOUT=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
-CONFIG_MTD_REDBOOT_PARTS_READONLY=y
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_GEOMETRY is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0xc0000000
-CONFIG_MTD_PHYSMAP_LEN=0x00800000
-CONFIG_MTD_PHYSMAP_BANKWIDTH=1
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_EDB7312 is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-CONFIG_CHR_DEV_SG=y
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=y
-CONFIG_MD_LINEAR=y
-CONFIG_MD_RAID0=y
-CONFIG_MD_RAID1=y
-# CONFIG_MD_RAID10 is not set
-CONFIG_MD_RAID5=y
-# CONFIG_MD_RAID6 is not set
-# CONFIG_MD_MULTIPATH is not set
-# CONFIG_MD_FAULTY is not set
-CONFIG_BLK_DEV_DM=y
-# CONFIG_DM_CRYPT is not set
-# CONFIG_DM_SNAPSHOT is not set
-# CONFIG_DM_MIRROR is not set
-# CONFIG_DM_ZERO is not set
-# CONFIG_DM_MULTIPATH is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-# CONFIG_NET_ETHERNET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-CONFIG_E1000=y
-CONFIG_E1000_NAPI=y
-# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-CONFIG_I2C_IOP3XX=y
-# CONFIG_I2C_ISA is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_SCx200_ACB is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Hardware Sensors Chip support
-#
-# CONFIG_I2C_SENSOR is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-
-#
-# Other I2C Chip support
-#
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-CONFIG_XFS_FS=y
-CONFIG_XFS_EXPORT=y
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_QUOTA is not set
-CONFIG_XFS_SECURITY=y
-CONFIG_XFS_POSIX_ACL=y
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-CONFIG_NFSD=y
-CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V4 is not set
-# CONFIG_NFSD_TCP is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_FRAME_POINTER=y
-CONFIG_DEBUG_USER=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC32 is not set
-# CONFIG_LIBCRC32C is not set
diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig
index f20814e6f497..a83222641045 100644
--- a/arch/arm/configs/s3c2410_defconfig
+++ b/arch/arm/configs/s3c2410_defconfig
@@ -1,14 +1,19 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-git9
-# Sun Jun 25 23:56:32 2006
+# Linux kernel version: 2.6.18
+# Wed Sep 20 20:27:31 2006
 #
 CONFIG_ARM=y
 CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # Code maturity level options
@@ -26,14 +31,15 @@ CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
+# CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 # CONFIG_RELAY is not set
 CONFIG_INITRAMFS_SOURCE=""
-CONFIG_UID16=y
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 # CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -46,6 +52,8 @@ CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -84,7 +92,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 # CONFIG_ARCH_INTEGRATOR is not set
 # CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91RM9200 is not set
+# CONFIG_ARCH_AT91 is not set
 # CONFIG_ARCH_CLPS7500 is not set
 # CONFIG_ARCH_CLPS711X is not set
 # CONFIG_ARCH_CO285 is not set
@@ -94,7 +102,8 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
 # CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP3XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
 # CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_IXP2000 is not set
 # CONFIG_ARCH_IXP23XX is not set
@@ -122,13 +131,18 @@ CONFIG_ARCH_SMDK2410=y
 CONFIG_ARCH_S3C2440=y
 CONFIG_SMDK2440_CPU2440=y
 CONFIG_SMDK2440_CPU2442=y
+CONFIG_MACH_S3C2413=y
 CONFIG_MACH_SMDK2413=y
 CONFIG_MACH_VR1000=y
 CONFIG_MACH_RX3715=y
 CONFIG_MACH_OTOM=y
 CONFIG_MACH_NEXCODER_2440=y
+CONFIG_MACH_VSTMS=y
 CONFIG_S3C2410_CLOCK=y
+CONFIG_S3C2410_PM=y
+CONFIG_CPU_S3C2410_DMA=y
 CONFIG_CPU_S3C2410=y
+CONFIG_S3C2412_PM=y
 CONFIG_CPU_S3C2412=y
 CONFIG_CPU_S3C244X=y
 CONFIG_CPU_S3C2440=y
@@ -156,7 +170,7 @@ CONFIG_S3C2410_LOWLEVEL_UART_PORT=0
 CONFIG_CPU_32=y
 CONFIG_CPU_ARM920T=y
 CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v4=y
+CONFIG_CPU_32v4T=y
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV4T=y
 CONFIG_CPU_ABRT_EV5TJ=y
@@ -200,6 +214,7 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
 CONFIG_ALIGNMENT_TRAP=y
 
 #
@@ -304,7 +319,6 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 
@@ -460,6 +474,7 @@ CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CDROM_PKTCDVD is not set
 CONFIG_ATA_OVER_ETH=m
@@ -640,6 +655,7 @@ CONFIG_SERIO_LIBPS2=y
 CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
 CONFIG_SERIAL_NONSTANDARD=y
 # CONFIG_COMPUTONE is not set
 # CONFIG_ROCKETPORT is not set
@@ -716,6 +732,7 @@ CONFIG_S3C2410_WATCHDOG=y
 # USB-based Watchdog Cards
 #
 # CONFIG_USBPCWATCHDOG is not set
+CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
 CONFIG_S3C2410_RTC=y
 # CONFIG_DTLK is not set
@@ -857,12 +874,12 @@ CONFIG_VIDEO_V4L2=y
 #
 # Graphics support
 #
+CONFIG_FIRMWARE_EDID=y
 CONFIG_FB=y
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_MACMODES is not set
-CONFIG_FB_FIRMWARE_EDID=y
 # CONFIG_FB_BACKLIGHT is not set
 CONFIG_FB_MODE_HELPERS=y
 # CONFIG_FB_TILEBLITTING is not set
@@ -995,7 +1012,7 @@ CONFIG_USB_MON=y
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
 # CONFIG_USB_LED is not set
-# CONFIG_USB_CY7C63 is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
 # CONFIG_USB_PHIDGETKIT is not set
 # CONFIG_USB_PHIDGETSERVO is not set
@@ -1095,6 +1112,7 @@ CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
 # CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
 # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
 CONFIG_JFFS2_ZLIB=y
 CONFIG_JFFS2_RTIME=y
@@ -1202,14 +1220,19 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 #
 # CONFIG_PRINTK_TIME is not set
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_KERNEL=y
 CONFIG_LOG_BUF_SHIFT=16
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_RWSEMS is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
@@ -1251,3 +1274,4 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
diff --git a/arch/arm/kernel/apm.c b/arch/arm/kernel/apm.c
index 33c55689f999..ecf4f9472d94 100644
--- a/arch/arm/kernel/apm.c
+++ b/arch/arm/kernel/apm.c
@@ -25,6 +25,7 @@
 #include <linux/list.h>
 #include <linux/init.h>
 #include <linux/completion.h>
+#include <linux/kthread.h>
 
 #include <asm/apm.h> /* apm_power_info */
 #include <asm/system.h>
@@ -80,7 +81,7 @@ struct apm_user {
  */
 static int suspends_pending;
 static int apm_disabled;
-static int arm_apm_active;
+static struct task_struct *kapmd_tsk;
 
 static DECLARE_WAIT_QUEUE_HEAD(apm_waitqueue);
 static DECLARE_WAIT_QUEUE_HEAD(apm_suspend_waitqueue);
@@ -97,7 +98,6 @@ static LIST_HEAD(apm_user_list);
  * to be suspending the system.
  */
 static DECLARE_WAIT_QUEUE_HEAD(kapmd_wait);
-static DECLARE_COMPLETION(kapmd_exit);
 static DEFINE_SPINLOCK(kapmd_queue_lock);
 static struct apm_queue kapmd_queue;
 
@@ -468,16 +468,13 @@ static int apm_get_info(char *buf, char **start, off_t fpos, int length)
 
 static int kapmd(void *arg)
 {
-	daemonize("kapmd");
-	current->flags |= PF_NOFREEZE;
-
 	do {
 		apm_event_t event;
 
 		wait_event_interruptible(kapmd_wait,
-				!queue_empty(&kapmd_queue) || !arm_apm_active);
+				!queue_empty(&kapmd_queue) || kthread_should_stop());
 
-		if (!arm_apm_active)
+		if (kthread_should_stop())
 			break;
 
 		spin_lock_irq(&kapmd_queue_lock);
@@ -508,7 +505,7 @@ static int kapmd(void *arg)
 		}
 	} while (1);
 
-	complete_and_exit(&kapmd_exit, 0);
+	return 0;
 }
 
 static int __init apm_init(void)
@@ -520,13 +517,14 @@ static int __init apm_init(void)
 		return -ENODEV;
 	}
 
-	arm_apm_active = 1;
-
-	ret = kernel_thread(kapmd, NULL, CLONE_KERNEL);
-	if (ret < 0) {
-		arm_apm_active = 0;
+	kapmd_tsk = kthread_create(kapmd, NULL, "kapmd");
+	if (IS_ERR(kapmd_tsk)) {
+		ret = PTR_ERR(kapmd_tsk);
+		kapmd_tsk = NULL;
 		return ret;
 	}
+	kapmd_tsk->flags |= PF_NOFREEZE;
+	wake_up_process(kapmd_tsk);
 
 #ifdef CONFIG_PROC_FS
 	create_proc_info_entry("apm", 0, NULL, apm_get_info);
@@ -535,10 +533,7 @@ static int __init apm_init(void)
 	ret = misc_register(&apm_device);
 	if (ret != 0) {
 		remove_proc_entry("apm", NULL);
-
-		arm_apm_active = 0;
-		wake_up(&kapmd_wait);
-		wait_for_completion(&kapmd_exit);
+		kthread_stop(kapmd_tsk);
 	}
 
 	return ret;
@@ -549,9 +544,7 @@ static void __exit apm_exit(void)
 	misc_deregister(&apm_device);
 	remove_proc_entry("apm", NULL);
 
-	arm_apm_active = 0;
-	wake_up(&kapmd_wait);
-	wait_for_completion(&kapmd_exit);
+	kthread_stop(kapmd_tsk);
 }
 
 module_init(apm_init);
diff --git a/arch/arm/kernel/debug.S b/arch/arm/kernel/debug.S
index a5747e58a9dc..5617566477b4 100644
--- a/arch/arm/kernel/debug.S
+++ b/arch/arm/kernel/debug.S
@@ -21,6 +21,36 @@
 
 #if defined(CONFIG_DEBUG_ICEDCC)
 		@@ debug using ARM EmbeddedICE DCC channel
+
+#if defined(CONFIG_CPU_V6)
+
+		.macro	addruart, rx
+		.endm
+
+		.macro	senduart, rd, rx
+		mcr	p14, 0, \rd, c0, c5, 0
+		.endm
+
+		.macro	busyuart, rd, rx
+1001:
+		mrc	p14, 0, \rx, c0, c1, 0
+		tst	\rx, #0x20000000
+		beq	1001b
+		.endm
+
+		.macro	waituart, rd, rx
+		mov	\rd, #0x2000000
+1001:
+		subs	\rd, \rd, #1
+		bmi	1002f
+		mrc	p14, 0, \rx, c0, c1, 0
+		tst	\rx, #0x20000000
+		bne	1001b
+1002:
+		.endm
+
+#else
+
 		.macro	addruart, rx
 		.endm
 
@@ -46,9 +76,12 @@
 		bne	1001b
 1002:
 		.endm
+
+#endif	/* CONFIG_CPU_V6 */
+
 #else
 #include <asm/arch/debug-macro.S>
-#endif
+#endif	/* CONFIG_DEBUG_ICEDCC */
 
 /*
  * Useful debugging routines
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index de4e33137901..bd623b73445f 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -191,6 +191,9 @@ __dabt_svc:
 __irq_svc:
 	svc_entry
 
+#ifdef CONFIG_TRACE_IRQFLAGS
+	bl	trace_hardirqs_off
+#endif
 #ifdef CONFIG_PREEMPT
 	get_thread_info tsk
 	ldr	r8, [tsk, #TI_PREEMPT]		@ get preempt count
@@ -211,6 +214,10 @@ preempt_return:
 #endif
 	ldr	r0, [sp, #S_PSR]		@ irqs are already disabled
 	msr	spsr_cxsf, r0
+#ifdef CONFIG_TRACE_IRQFLAGS
+	tst	r0, #PSR_I_BIT
+	bleq	trace_hardirqs_on
+#endif
 	ldmia	sp, {r0 - pc}^			@ load r0 - pc, cpsr
 
 	.ltorg
@@ -398,6 +405,9 @@ __dabt_usr:
 __irq_usr:
 	usr_entry
 
+#ifdef CONFIG_TRACE_IRQFLAGS
+	bl	trace_hardirqs_off
+#endif
 	get_thread_info tsk
 #ifdef CONFIG_PREEMPT
 	ldr	r8, [tsk, #TI_PREEMPT]		@ get preempt count
@@ -412,6 +422,9 @@ __irq_usr:
 	teq	r0, r7
 	strne	r0, [r0, -r0]
 #endif
+#ifdef CONFIG_TRACE_IRQFLAGS
+	bl	trace_hardirqs_on
+#endif
 
 	mov	why, #0
 	b	ret_to_user
diff --git a/arch/arm/kernel/head-nommu.S b/arch/arm/kernel/head-nommu.S
index ac9eb3d30518..f359a189dcf2 100644
--- a/arch/arm/kernel/head-nommu.S
+++ b/arch/arm/kernel/head-nommu.S
@@ -9,7 +9,6 @@
  * published by the Free Software Foundation.
  *
  *  Common kernel startup code (non-paged MM)
- *    for 32-bit CPUs which has a process ID register(CP15).
  *
  */
 #include <linux/linkage.h>
@@ -40,7 +39,11 @@
 ENTRY(stext)
 	msr	cpsr_c, #PSR_F_BIT | PSR_I_BIT | SVC_MODE @ ensure svc mode
 						@ and irqs disabled
+#ifndef CONFIG_CPU_CP15
+	ldr	r9, =CONFIG_PROCESSOR_ID
+#else
 	mrc	p15, 0, r9, c0, c0		@ get processor id
+#endif
 	bl	__lookup_processor_type		@ r5=procinfo r9=cpuid
 	movs	r10, r5				@ invalid processor (r5=0)?
 	beq	__error_p				@ yes, error 'p'
@@ -58,6 +61,7 @@ ENTRY(stext)
  */
 	.type	__after_proc_init, %function
 __after_proc_init:
+#ifdef CONFIG_CPU_CP15
 	mrc	p15, 0, r0, c1, c0, 0		@ read control reg
 #ifdef CONFIG_ALIGNMENT_TRAP
 	orr	r0, r0, #CR_A
@@ -73,7 +77,13 @@ __after_proc_init:
 #ifdef CONFIG_CPU_ICACHE_DISABLE
 	bic	r0, r0, #CR_I
 #endif
+#ifdef CONFIG_CPU_HIGH_VECTOR
+	orr	r0, r0, #CR_V
+#else
+	bic	r0, r0, #CR_V
+#endif
 	mcr	p15, 0, r0, c1, c0, 0		@ write control reg
+#endif /* CONFIG_CPU_CP15 */
 
 	mov	pc, r13				@ clear the BSS and jump
 						@ to start_kernel
diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c
index 298363d97047..1b061583408e 100644
--- a/arch/arm/kernel/module.c
+++ b/arch/arm/kernel/module.c
@@ -2,6 +2,7 @@
  *  linux/arch/arm/kernel/module.c
  *
  *  Copyright (C) 2002 Russell King.
+ *  Modified for nommu by Hyok S. Choi
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -32,6 +33,7 @@ extern void _etext;
 #define MODULE_START	(((unsigned long)&_etext + ~PGDIR_MASK) & PGDIR_MASK)
 #endif
 
+#ifdef CONFIG_MMU
 void *module_alloc(unsigned long size)
 {
 	struct vm_struct *area;
@@ -46,6 +48,12 @@ void *module_alloc(unsigned long size)
 
 	return __vmalloc_area(area, GFP_KERNEL, PAGE_KERNEL);
 }
+#else /* CONFIG_MMU */
+void *module_alloc(unsigned long size)
+{
+	return size == 0 ? NULL : vmalloc(size);
+}
+#endif /* !CONFIG_MMU */
 
 void module_free(struct module *module, void *region)
 {
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index 3079535afccd..bf35c178a877 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -221,16 +221,26 @@ void __show_regs(struct pt_regs *regs)
 		processor_modes[processor_mode(regs)],
 		thumb_mode(regs) ? " (T)" : "",
 		get_fs() == get_ds() ? "kernel" : "user");
+#if CONFIG_CPU_CP15
 	{
-		unsigned int ctrl, transbase, dac;
+		unsigned int ctrl;
 		  __asm__ (
 		"	mrc p15, 0, %0, c1, c0\n"
-		"	mrc p15, 0, %1, c2, c0\n"
-		"	mrc p15, 0, %2, c3, c0\n"
-		: "=r" (ctrl), "=r" (transbase), "=r" (dac));
-		printk("Control: %04X  Table: %08X  DAC: %08X\n",
-		  	ctrl, transbase, dac);
+		: "=r" (ctrl));
+		printk("Control: %04X\n", ctrl);
 	}
+#ifdef CONFIG_CPU_CP15_MMU
+	{
+		unsigned int transbase, dac;
+		  __asm__ (
+		"	mrc p15, 0, %0, c2, c0\n"
+		"	mrc p15, 0, %1, c3, c0\n"
+		: "=r" (transbase), "=r" (dac));
+		printk("Table: %08X  DAC: %08X\n",
+		  	transbase, dac);
+	}
+#endif
+#endif
 }
 
 void show_regs(struct pt_regs * regs)
diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c
index 09a67d771857..d4dceb5f06e9 100644
--- a/arch/arm/kernel/time.c
+++ b/arch/arm/kernel/time.c
@@ -69,10 +69,12 @@ EXPORT_SYMBOL(profile_pc);
  */
 int (*set_rtc)(void);
 
+#ifndef CONFIG_GENERIC_TIME
 static unsigned long dummy_gettimeoffset(void)
 {
 	return 0;
 }
+#endif
 
 /*
  * Scheduler clock - returns current time in nanosec units.
@@ -230,6 +232,7 @@ static inline void do_leds(void)
 #define	do_leds()
 #endif
 
+#ifndef CONFIG_GENERIC_TIME
 void do_gettimeofday(struct timeval *tv)
 {
 	unsigned long flags;
@@ -291,6 +294,7 @@ int do_settimeofday(struct timespec *tv)
 }
 
 EXPORT_SYMBOL(do_settimeofday);
+#endif /* !CONFIG_GENERIC_TIME */
 
 /**
  * save_time_delta - Save the offset between system time and RTC time
@@ -500,8 +504,10 @@ device_initcall(timer_init_sysfs);
 
 void __init time_init(void)
 {
+#ifndef CONFIG_GENERIC_TIME
 	if (system_timer->offset == NULL)
 		system_timer->offset = dummy_gettimeoffset;
+#endif
 	system_timer->init();
 
 #ifdef CONFIG_NO_IDLE_HZ
diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
index aeeed806f991..bede380c07a9 100644
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -191,7 +191,7 @@ void show_stack(struct task_struct *tsk, unsigned long *sp)
 	if (tsk != current)
 		fp = thread_saved_fp(tsk);
 	else
-		asm("mov%? %0, fp" : "=r" (fp));
+		asm("mov %0, fp" : "=r" (fp) : : "cc");
 
 	c_backtrace(fp, 0x10);
 	barrier();
diff --git a/arch/arm/mach-at91rm9200/at91rm9200.c b/arch/arm/mach-at91rm9200/at91rm9200.c
index 0985b1c42c7c..dcf6136fedf9 100644
--- a/arch/arm/mach-at91rm9200/at91rm9200.c
+++ b/arch/arm/mach-at91rm9200/at91rm9200.c
@@ -17,6 +17,7 @@
 
 #include <asm/hardware.h>
 #include "generic.h"
+#include "clock.h"
 
 static struct map_desc at91rm9200_io_desc[] __initdata = {
 	{
@@ -26,87 +27,224 @@ static struct map_desc at91rm9200_io_desc[] __initdata = {
 		.type		= MT_DEVICE,
 	}, {
 		.virtual	= AT91_VA_BASE_SPI,
-		.pfn		= __phys_to_pfn(AT91_BASE_SPI),
-		.length		= SZ_16K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= AT91_VA_BASE_SSC2,
-		.pfn		= __phys_to_pfn(AT91_BASE_SSC2),
-		.length		= SZ_16K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= AT91_VA_BASE_SSC1,
-		.pfn		= __phys_to_pfn(AT91_BASE_SSC1),
-		.length		= SZ_16K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= AT91_VA_BASE_SSC0,
-		.pfn		= __phys_to_pfn(AT91_BASE_SSC0),
-		.length		= SZ_16K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= AT91_VA_BASE_US3,
-		.pfn		= __phys_to_pfn(AT91_BASE_US3),
-		.length		= SZ_16K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= AT91_VA_BASE_US2,
-		.pfn		= __phys_to_pfn(AT91_BASE_US2),
-		.length		= SZ_16K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= AT91_VA_BASE_US1,
-		.pfn		= __phys_to_pfn(AT91_BASE_US1),
-		.length		= SZ_16K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= AT91_VA_BASE_US0,
-		.pfn		= __phys_to_pfn(AT91_BASE_US0),
+		.pfn		= __phys_to_pfn(AT91RM9200_BASE_SPI),
 		.length		= SZ_16K,
 		.type		= MT_DEVICE,
 	}, {
 		.virtual	= AT91_VA_BASE_EMAC,
-		.pfn		= __phys_to_pfn(AT91_BASE_EMAC),
+		.pfn		= __phys_to_pfn(AT91RM9200_BASE_EMAC),
 		.length		= SZ_16K,
 		.type		= MT_DEVICE,
 	}, {
 		.virtual	= AT91_VA_BASE_TWI,
-		.pfn		= __phys_to_pfn(AT91_BASE_TWI),
+		.pfn		= __phys_to_pfn(AT91RM9200_BASE_TWI),
 		.length		= SZ_16K,
 		.type		= MT_DEVICE,
 	}, {
 		.virtual	= AT91_VA_BASE_MCI,
-		.pfn		= __phys_to_pfn(AT91_BASE_MCI),
+		.pfn		= __phys_to_pfn(AT91RM9200_BASE_MCI),
 		.length		= SZ_16K,
 		.type		= MT_DEVICE,
 	}, {
 		.virtual	= AT91_VA_BASE_UDP,
-		.pfn		= __phys_to_pfn(AT91_BASE_UDP),
-		.length		= SZ_16K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= AT91_VA_BASE_TCB1,
-		.pfn		= __phys_to_pfn(AT91_BASE_TCB1),
-		.length		= SZ_16K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= AT91_VA_BASE_TCB0,
-		.pfn		= __phys_to_pfn(AT91_BASE_TCB0),
+		.pfn		= __phys_to_pfn(AT91RM9200_BASE_UDP),
 		.length		= SZ_16K,
 		.type		= MT_DEVICE,
 	}, {
 		.virtual	= AT91_SRAM_VIRT_BASE,
-		.pfn		= __phys_to_pfn(AT91_SRAM_BASE),
-		.length		= AT91_SRAM_SIZE,
+		.pfn		= __phys_to_pfn(AT91RM9200_SRAM_BASE),
+		.length		= AT91RM9200_SRAM_SIZE,
 		.type		= MT_DEVICE,
 	},
 };
 
-void __init at91rm9200_map_io(void)
+/* --------------------------------------------------------------------
+ *  Clocks
+ * -------------------------------------------------------------------- */
+
+/*
+ * The peripheral clocks.
+ */
+static struct clk udc_clk = {
+	.name		= "udc_clk",
+	.pmc_mask	= 1 << AT91RM9200_ID_UDP,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk ohci_clk = {
+	.name		= "ohci_clk",
+	.pmc_mask	= 1 << AT91RM9200_ID_UHP,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk ether_clk = {
+	.name		= "ether_clk",
+	.pmc_mask	= 1 << AT91RM9200_ID_EMAC,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk mmc_clk = {
+	.name		= "mci_clk",
+	.pmc_mask	= 1 << AT91RM9200_ID_MCI,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk twi_clk = {
+	.name		= "twi_clk",
+	.pmc_mask	= 1 << AT91RM9200_ID_TWI,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart0_clk = {
+	.name		= "usart0_clk",
+	.pmc_mask	= 1 << AT91RM9200_ID_US0,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart1_clk = {
+	.name		= "usart1_clk",
+	.pmc_mask	= 1 << AT91RM9200_ID_US1,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart2_clk = {
+	.name		= "usart2_clk",
+	.pmc_mask	= 1 << AT91RM9200_ID_US2,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart3_clk = {
+	.name		= "usart3_clk",
+	.pmc_mask	= 1 << AT91RM9200_ID_US3,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk spi_clk = {
+	.name		= "spi_clk",
+	.pmc_mask	= 1 << AT91RM9200_ID_SPI,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk pioA_clk = {
+	.name		= "pioA_clk",
+	.pmc_mask	= 1 << AT91RM9200_ID_PIOA,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk pioB_clk = {
+	.name		= "pioB_clk",
+	.pmc_mask	= 1 << AT91RM9200_ID_PIOB,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk pioC_clk = {
+	.name		= "pioC_clk",
+	.pmc_mask	= 1 << AT91RM9200_ID_PIOC,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk pioD_clk = {
+	.name		= "pioD_clk",
+	.pmc_mask	= 1 << AT91RM9200_ID_PIOD,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+
+static struct clk *periph_clocks[] __initdata = {
+	&pioA_clk,
+	&pioB_clk,
+	&pioC_clk,
+	&pioD_clk,
+	&usart0_clk,
+	&usart1_clk,
+	&usart2_clk,
+	&usart3_clk,
+	&mmc_clk,
+	&udc_clk,
+	&twi_clk,
+	&spi_clk,
+	// ssc 0 .. ssc2
+	// tc0 .. tc5
+	&ohci_clk,
+	&ether_clk,
+	// irq0 .. irq6
+};
+
+/*
+ * The four programmable clocks.
+ * You must configure pin multiplexing to bring these signals out.
+ */
+static struct clk pck0 = {
+	.name		= "pck0",
+	.pmc_mask	= AT91_PMC_PCK0,
+	.type		= CLK_TYPE_PROGRAMMABLE,
+	.id		= 0,
+};
+static struct clk pck1 = {
+	.name		= "pck1",
+	.pmc_mask	= AT91_PMC_PCK1,
+	.type		= CLK_TYPE_PROGRAMMABLE,
+	.id		= 1,
+};
+static struct clk pck2 = {
+	.name		= "pck2",
+	.pmc_mask	= AT91_PMC_PCK2,
+	.type		= CLK_TYPE_PROGRAMMABLE,
+	.id		= 2,
+};
+static struct clk pck3 = {
+	.name		= "pck3",
+	.pmc_mask	= AT91_PMC_PCK3,
+	.type		= CLK_TYPE_PROGRAMMABLE,
+	.id		= 3,
+};
+
+static void __init at91rm9200_register_clocks(void)
 {
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
+		clk_register(periph_clocks[i]);
+
+	clk_register(&pck0);
+	clk_register(&pck1);
+	clk_register(&pck2);
+	clk_register(&pck3);
+}
+
+/* --------------------------------------------------------------------
+ *  GPIO
+ * -------------------------------------------------------------------- */
+
+static struct at91_gpio_bank at91rm9200_gpio[] = {
+	{
+		.id		= AT91RM9200_ID_PIOA,
+		.offset		= AT91_PIOA,
+		.clock		= &pioA_clk,
+	}, {
+		.id		= AT91RM9200_ID_PIOB,
+		.offset		= AT91_PIOB,
+		.clock		= &pioB_clk,
+	}, {
+		.id		= AT91RM9200_ID_PIOC,
+		.offset		= AT91_PIOC,
+		.clock		= &pioC_clk,
+	}, {
+		.id		= AT91RM9200_ID_PIOD,
+		.offset		= AT91_PIOD,
+		.clock		= &pioD_clk,
+	}
+};
+
+/* --------------------------------------------------------------------
+ *  AT91RM9200 processor initialization
+ * -------------------------------------------------------------------- */
+void __init at91rm9200_initialize(unsigned long main_clock, unsigned short banks)
+{
+	/* Map peripherals */
 	iotable_init(at91rm9200_io_desc, ARRAY_SIZE(at91rm9200_io_desc));
+
+	/* Init clock subsystem */
+	at91_clock_init(main_clock);
+
+	/* Register the processor-specific clocks */
+	at91rm9200_register_clocks();
+
+	/* Initialize GPIO subsystem */
+	at91_gpio_init(at91rm9200_gpio, banks);
 }
 
+
+/* --------------------------------------------------------------------
+ *  Interrupt initialization
+ * -------------------------------------------------------------------- */
+
 /*
  * The default interrupt priority levels (0 = lowest, 7 = highest).
  */
@@ -145,10 +283,14 @@ static unsigned int at91rm9200_default_irq_priority[NR_AIC_IRQS] __initdata = {
 	0	/* Advanced Interrupt Controller (IRQ6) */
 };
 
-void __init at91rm9200_init_irq(unsigned int priority[NR_AIC_IRQS])
+void __init at91rm9200_init_interrupts(unsigned int priority[NR_AIC_IRQS])
 {
 	if (!priority)
 		priority = at91rm9200_default_irq_priority;
 
+	/* Initialize the AIC interrupt controller */
 	at91_aic_init(priority);
+
+	/* Enable GPIO interrupts */
+	at91_gpio_irq_setup();
 }
diff --git a/arch/arm/mach-at91rm9200/board-1arm.c b/arch/arm/mach-at91rm9200/board-1arm.c
index dc79e0992af7..36eecd7161f5 100644
--- a/arch/arm/mach-at91rm9200/board-1arm.c
+++ b/arch/arm/mach-at91rm9200/board-1arm.c
@@ -34,20 +34,11 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/hardware.h>
 #include <asm/arch/board.h>
 #include <asm/arch/gpio.h>
 
 #include "generic.h"
 
-static void __init onearm_init_irq(void)
-{
-	/* Initialize AIC controller */
-	at91rm9200_init_irq(NULL);
-
-	/* Set up the GPIO interrupts */
-	at91_gpio_irq_setup(PQFP_GPIO_BANKS);
-}
 
 /*
  * Serial port configuration.
@@ -62,15 +53,18 @@ static struct at91_uart_config __initdata onearm_uart_config = {
 
 static void __init onearm_map_io(void)
 {
-	at91rm9200_map_io();
-
-	/* Initialize clocks: 18.432 MHz crystal */
-	at91_clock_init(18432000);
+	/* Initialize processor: 18.432 MHz crystal */
+	at91rm9200_initialize(18432000, AT91RM9200_PQFP);
 
 	/* Setup the serial ports and console */
 	at91_init_serial(&onearm_uart_config);
 }
 
+static void __init onearm_init_irq(void)
+{
+	at91rm9200_init_interrupts(NULL);
+}
+
 static struct at91_eth_data __initdata onearm_eth_data = {
 	.phy_irq_pin	= AT91_PIN_PC4,
 	.is_rmii	= 1,
diff --git a/arch/arm/mach-at91rm9200/board-carmeva.c b/arch/arm/mach-at91rm9200/board-carmeva.c
index 2c138b542ebe..50e513681ae6 100644
--- a/arch/arm/mach-at91rm9200/board-carmeva.c
+++ b/arch/arm/mach-at91rm9200/board-carmeva.c
@@ -35,20 +35,11 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/hardware.h>
 #include <asm/arch/board.h>
 #include <asm/arch/gpio.h>
 
 #include "generic.h"
 
-static void __init carmeva_init_irq(void)
-{
-	/* Initialize AIC controller */
-	at91rm9200_init_irq(NULL);
-
-	/* Set up the GPIO interrupts */
-	at91_gpio_irq_setup(BGA_GPIO_BANKS);
-}
 
 /*
  * Serial port configuration.
@@ -63,15 +54,19 @@ static struct at91_uart_config __initdata carmeva_uart_config = {
 
 static void __init carmeva_map_io(void)
 {
-	at91rm9200_map_io();
-
-	/* Initialize clocks: 20.000 MHz crystal */
-	at91_clock_init(20000000);
+	/* Initialize processor: 20.000 MHz crystal */
+	at91rm9200_initialize(20000000, AT91RM9200_BGA);
 
 	/* Setup the serial ports and console */
 	at91_init_serial(&carmeva_uart_config);
 }
 
+static void __init carmeva_init_irq(void)
+{
+	at91rm9200_init_interrupts(NULL);
+}
+
+
 static struct at91_eth_data __initdata carmeva_eth_data = {
 	.phy_irq_pin	= AT91_PIN_PC4,
 	.is_rmii	= 1,
diff --git a/arch/arm/mach-at91rm9200/board-csb337.c b/arch/arm/mach-at91rm9200/board-csb337.c
index 794d3fbb449b..8eeae491ce71 100644
--- a/arch/arm/mach-at91rm9200/board-csb337.c
+++ b/arch/arm/mach-at91rm9200/board-csb337.c
@@ -34,20 +34,11 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/hardware.h>
 #include <asm/arch/board.h>
 #include <asm/arch/gpio.h>
 
 #include "generic.h"
 
-static void __init csb337_init_irq(void)
-{
-	/* Initialize AIC controller */
-	at91rm9200_init_irq(NULL);
-
-	/* Set up the GPIO interrupts */
-	at91_gpio_irq_setup(BGA_GPIO_BANKS);
-}
 
 /*
  * Serial port configuration.
@@ -62,10 +53,8 @@ static struct at91_uart_config __initdata csb337_uart_config = {
 
 static void __init csb337_map_io(void)
 {
-	at91rm9200_map_io();
-
-	/* Initialize clocks: 3.6864 MHz crystal */
-	at91_clock_init(3686400);
+	/* Initialize processor: 3.6864 MHz crystal */
+	at91rm9200_initialize(3686400, AT91RM9200_BGA);
 
 	/* Setup the LEDs */
 	at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1);
@@ -74,6 +63,11 @@ static void __init csb337_map_io(void)
 	at91_init_serial(&csb337_uart_config);
 }
 
+static void __init csb337_init_irq(void)
+{
+	at91rm9200_init_interrupts(NULL);
+}
+
 static struct at91_eth_data __initdata csb337_eth_data = {
 	.phy_irq_pin	= AT91_PIN_PC2,
 	.is_rmii	= 0,
diff --git a/arch/arm/mach-at91rm9200/board-csb637.c b/arch/arm/mach-at91rm9200/board-csb637.c
index c8b6f334246a..a29fa0e822ce 100644
--- a/arch/arm/mach-at91rm9200/board-csb637.c
+++ b/arch/arm/mach-at91rm9200/board-csb637.c
@@ -33,20 +33,11 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/hardware.h>
 #include <asm/arch/board.h>
 #include <asm/arch/gpio.h>
 
 #include "generic.h"
 
-static void __init csb637_init_irq(void)
-{
-	/* Initialize AIC controller */
-	at91rm9200_init_irq(NULL);
-
-	/* Set up the GPIO interrupts */
-	at91_gpio_irq_setup(BGA_GPIO_BANKS);
-}
 
 /*
  * Serial port configuration.
@@ -61,10 +52,8 @@ static struct at91_uart_config __initdata csb637_uart_config = {
 
 static void __init csb637_map_io(void)
 {
-	at91rm9200_map_io();
-
-	/* Initialize clocks: 3.6864 MHz crystal */
-	at91_clock_init(3686400);
+	/* Initialize processor: 3.6864 MHz crystal */
+	at91rm9200_initialize(3686400, AT91RM9200_BGA);
 
 	/* Setup the LEDs */
 	at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2);
@@ -73,6 +62,11 @@ static void __init csb637_map_io(void)
 	at91_init_serial(&csb637_uart_config);
 }
 
+static void __init csb637_init_irq(void)
+{
+	at91rm9200_init_interrupts(NULL);
+}
+
 static struct at91_eth_data __initdata csb637_eth_data = {
 	.phy_irq_pin	= AT91_PIN_PC0,
 	.is_rmii	= 0,
diff --git a/arch/arm/mach-at91rm9200/board-dk.c b/arch/arm/mach-at91rm9200/board-dk.c
index 65873037e02a..c699f3984d4b 100644
--- a/arch/arm/mach-at91rm9200/board-dk.c
+++ b/arch/arm/mach-at91rm9200/board-dk.c
@@ -37,20 +37,11 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/hardware.h>
 #include <asm/arch/board.h>
 #include <asm/arch/gpio.h>
 
 #include "generic.h"
 
-static void __init dk_init_irq(void)
-{
-	/* Initialize AIC controller */
-	at91rm9200_init_irq(NULL);
-
-	/* Set up the GPIO interrupts */
-	at91_gpio_irq_setup(BGA_GPIO_BANKS);
-}
 
 /*
  * Serial port configuration.
@@ -65,10 +56,8 @@ static struct at91_uart_config __initdata dk_uart_config = {
 
 static void __init dk_map_io(void)
 {
-	at91rm9200_map_io();
-
-	/* Initialize clocks: 18.432 MHz crystal */
-	at91_clock_init(18432000);
+	/* Initialize processor: 18.432 MHz crystal */
+	at91rm9200_initialize(18432000, AT91RM9200_BGA);
 
 	/* Setup the LEDs */
 	at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2);
@@ -77,6 +66,11 @@ static void __init dk_map_io(void)
 	at91_init_serial(&dk_uart_config);
 }
 
+static void __init dk_init_irq(void)
+{
+	at91rm9200_init_interrupts(NULL);
+}
+
 static struct at91_eth_data __initdata dk_eth_data = {
 	.phy_irq_pin	= AT91_PIN_PC4,
 	.is_rmii	= 1,
@@ -128,6 +122,29 @@ static struct spi_board_info dk_spi_devices[] = {
 #endif
 };
 
+static struct mtd_partition __initdata dk_nand_partition[] = {
+	{
+		.name	= "NAND Partition 1",
+		.offset	= 0,
+		.size	= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct mtd_partition *nand_partitions(int size, int *num_partitions)
+{
+	*num_partitions = ARRAY_SIZE(dk_nand_partition);
+	return dk_nand_partition;
+}
+
+static struct at91_nand_data __initdata dk_nand_data = {
+	.ale		= 22,
+	.cle		= 21,
+	.det_pin	= AT91_PIN_PB1,
+	.rdy_pin	= AT91_PIN_PC2,
+	// .enable_pin	= ... not there
+	.partition_info	= nand_partitions,
+};
+
 static void __init dk_board_init(void)
 {
 	/* Serial */
@@ -153,6 +170,8 @@ static void __init dk_board_init(void)
 	at91_set_gpio_output(AT91_PIN_PB7, 1);	/* this MMC card slot can optionally use SPI signaling (CS3). */
 	at91_add_device_mmc(&dk_mmc_data);
 #endif
+	/* NAND */
+	at91_add_device_nand(&dk_nand_data);
 	/* VGA */
 //	dk_add_device_video();
 }
diff --git a/arch/arm/mach-at91rm9200/board-eb9200.c b/arch/arm/mach-at91rm9200/board-eb9200.c
index a3e2df968a66..c6e0d51fbea0 100644
--- a/arch/arm/mach-at91rm9200/board-eb9200.c
+++ b/arch/arm/mach-at91rm9200/board-eb9200.c
@@ -35,20 +35,11 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/hardware.h>
 #include <asm/arch/board.h>
 #include <asm/arch/gpio.h>
 
 #include "generic.h"
 
-static void __init eb9200_init_irq(void)
-{
-	/* Initialize AIC controller */
-	at91rm9200_init_irq(NULL);
-
-	/* Set up the GPIO interrupts */
-	at91_gpio_irq_setup(BGA_GPIO_BANKS);
-}
 
 /*
  * Serial port configuration.
@@ -63,15 +54,18 @@ static struct at91_uart_config __initdata eb9200_uart_config = {
 
 static void __init eb9200_map_io(void)
 {
-	at91rm9200_map_io();
-
-	/* Initialize clocks: 18.432 MHz crystal */
-	at91_clock_init(18432000);
+	/* Initialize processor: 18.432 MHz crystal */
+	at91rm9200_initialize(18432000, AT91RM9200_BGA);
 
 	/* Setup the serial ports and console */
 	at91_init_serial(&eb9200_uart_config);
 }
 
+static void __init eb9200_init_irq(void)
+{
+	at91rm9200_init_interrupts(NULL);
+}
+
 static struct at91_eth_data __initdata eb9200_eth_data = {
 	.phy_irq_pin	= AT91_PIN_PC4,
 	.is_rmii	= 1,
diff --git a/arch/arm/mach-at91rm9200/board-ek.c b/arch/arm/mach-at91rm9200/board-ek.c
index 868192351dda..830eb7932178 100644
--- a/arch/arm/mach-at91rm9200/board-ek.c
+++ b/arch/arm/mach-at91rm9200/board-ek.c
@@ -37,20 +37,11 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/hardware.h>
 #include <asm/arch/board.h>
 #include <asm/arch/gpio.h>
 
 #include "generic.h"
 
-static void __init ek_init_irq(void)
-{
-	/* Initialize AIC controller */
-	at91rm9200_init_irq(NULL);
-
-	/* Set up the GPIO interrupts */
-	at91_gpio_irq_setup(BGA_GPIO_BANKS);
-}
 
 /*
  * Serial port configuration.
@@ -65,10 +56,8 @@ static struct at91_uart_config __initdata ek_uart_config = {
 
 static void __init ek_map_io(void)
 {
-	at91rm9200_map_io();
-
-	/* Initialize clocks: 18.432 MHz crystal */
-	at91_clock_init(18432000);
+	/* Initialize processor: 18.432 MHz crystal */
+	at91rm9200_initialize(18432000, AT91RM9200_BGA);
 
 	/* Setup the LEDs */
 	at91_init_leds(AT91_PIN_PB1, AT91_PIN_PB2);
@@ -77,6 +66,11 @@ static void __init ek_map_io(void)
 	at91_init_serial(&ek_uart_config);
 }
 
+static void __init ek_init_irq(void)
+{
+	at91rm9200_init_interrupts(NULL);
+}
+
 static struct at91_eth_data __initdata ek_eth_data = {
 	.phy_irq_pin	= AT91_PIN_PC4,
 	.is_rmii	= 1,
diff --git a/arch/arm/mach-at91rm9200/board-kafa.c b/arch/arm/mach-at91rm9200/board-kafa.c
index bf760c5e0c46..91e301924f2c 100644
--- a/arch/arm/mach-at91rm9200/board-kafa.c
+++ b/arch/arm/mach-at91rm9200/board-kafa.c
@@ -34,20 +34,11 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/hardware.h>
 #include <asm/arch/board.h>
 #include <asm/arch/gpio.h>
 
 #include "generic.h"
 
-static void __init kafa_init_irq(void)
-{
-	/* Initialize AIC controller */
-	at91rm9200_init_irq(NULL);
-
-	/* Set up the GPIO interrupts */
-	at91_gpio_irq_setup(PQFP_GPIO_BANKS);
-}
 
 /*
  * Serial port configuration.
@@ -62,10 +53,8 @@ static struct at91_uart_config __initdata kafa_uart_config = {
 
 static void __init kafa_map_io(void)
 {
-	at91rm9200_map_io();
-
-	/* Initialize clocks: 18.432 MHz crystal */
-	at91_clock_init(18432000);
+	/* Initialize processor: 18.432 MHz crystal */
+	at91rm9200_initialize(18432000, AT91RM9200_PQFP);
 
 	/* Set up the LEDs */
 	at91_init_leds(AT91_PIN_PB4, AT91_PIN_PB4);
@@ -74,6 +63,11 @@ static void __init kafa_map_io(void)
 	at91_init_serial(&kafa_uart_config);
 }
 
+static void __init kafa_init_irq(void)
+{
+	at91rm9200_init_interrupts(NULL);
+}
+
 static struct at91_eth_data __initdata kafa_eth_data = {
 	.phy_irq_pin	= AT91_PIN_PC4,
 	.is_rmii	= 0,
diff --git a/arch/arm/mach-at91rm9200/board-kb9202.c b/arch/arm/mach-at91rm9200/board-kb9202.c
index f06d2b54cc9a..272fe43bceca 100644
--- a/arch/arm/mach-at91rm9200/board-kb9202.c
+++ b/arch/arm/mach-at91rm9200/board-kb9202.c
@@ -35,20 +35,11 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/hardware.h>
 #include <asm/arch/board.h>
 #include <asm/arch/gpio.h>
 
 #include "generic.h"
 
-static void __init kb9202_init_irq(void)
-{
-	/* Initialize AIC controller */
-	at91rm9200_init_irq(NULL);
-
-	/* Set up the GPIO interrupts */
-	at91_gpio_irq_setup(PQFP_GPIO_BANKS);
-}
 
 /*
  * Serial port configuration.
@@ -63,10 +54,8 @@ static struct at91_uart_config __initdata kb9202_uart_config = {
 
 static void __init kb9202_map_io(void)
 {
-	at91rm9200_map_io();
-
-	/* Initialize clocks: 10 MHz crystal */
-	at91_clock_init(10000000);
+	/* Initialize processor: 10 MHz crystal */
+	at91rm9200_initialize(10000000, AT91RM9200_PQFP);
 
 	/* Set up the LEDs */
 	at91_init_leds(AT91_PIN_PC19, AT91_PIN_PC18);
@@ -75,6 +64,11 @@ static void __init kb9202_map_io(void)
 	at91_init_serial(&kb9202_uart_config);
 }
 
+static void __init kb9202_init_irq(void)
+{
+	at91rm9200_init_interrupts(NULL);
+}
+
 static struct at91_eth_data __initdata kb9202_eth_data = {
 	.phy_irq_pin	= AT91_PIN_PB29,
 	.is_rmii	= 0,
@@ -95,6 +89,29 @@ static struct at91_mmc_data __initdata kb9202_mmc_data = {
 	.wire4		= 1,
 };
 
+static struct mtd_partition __initdata kb9202_nand_partition[] = {
+	{
+		.name	= "nand_fs",
+		.offset	= 0,
+		.size	= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct mtd_partition *nand_partitions(int size, int *num_partitions)
+{
+	*num_partitions = ARRAY_SIZE(kb9202_nand_partition);
+	return kb9202_nand_partition;
+}
+
+static struct at91_nand_data __initdata kb9202_nand_data = {
+	.ale		= 22,
+	.cle		= 21,
+	// .det_pin	= ... not there
+	.rdy_pin	= AT91_PIN_PC29,
+	.enable_pin	= AT91_PIN_PC28,
+	.partition_info	= nand_partitions,
+};
+
 static void __init kb9202_board_init(void)
 {
 	/* Serial */
@@ -111,6 +128,8 @@ static void __init kb9202_board_init(void)
 	at91_add_device_i2c();
 	/* SPI */
 	at91_add_device_spi(NULL, 0);
+	/* NAND */
+	at91_add_device_nand(&kb9202_nand_data);
 }
 
 MACHINE_START(KB9200, "KB920x")
diff --git a/arch/arm/mach-at91rm9200/clock.c b/arch/arm/mach-at91rm9200/clock.c
index edc2cc837ae6..a43b061a7c85 100644
--- a/arch/arm/mach-at91rm9200/clock.c
+++ b/arch/arm/mach-at91rm9200/clock.c
@@ -29,7 +29,7 @@
 
 #include <asm/hardware.h>
 
-#include "generic.h"
+#include "clock.h"
 
 
 /*
@@ -38,23 +38,15 @@
  * PLLB be used at other rates (on boards that don't need USB), etc.
  */
 
-struct clk {
-	const char	*name;		/* unique clock name */
-	const char	*function;	/* function of the clock */
-	struct device	*dev;		/* device associated with function */
-	unsigned long	rate_hz;
-	struct clk	*parent;
-	u32		pmc_mask;
-	void		(*mode)(struct clk *, int);
-	unsigned	id:2;		/* PCK0..3, or 32k/main/a/b */
-	unsigned	primary:1;
-	unsigned	pll:1;
-	unsigned	programmable:1;
-	u16		users;
-};
+#define clk_is_primary(x)	((x)->type & CLK_TYPE_PRIMARY)
+#define clk_is_programmable(x)	((x)->type & CLK_TYPE_PROGRAMMABLE)
+#define clk_is_peripheral(x)	((x)->type & CLK_TYPE_PERIPHERAL)
+
+
+static LIST_HEAD(clocks);
+static DEFINE_SPINLOCK(clk_lock);
 
-static spinlock_t	clk_lock;
-static u32		at91_pllb_usb_init;
+static u32 at91_pllb_usb_init;
 
 /*
  * Four primary clock sources:  two crystal oscillators (32K, main), and
@@ -67,21 +59,20 @@ static struct clk clk32k = {
 	.rate_hz	= AT91_SLOW_CLOCK,
 	.users		= 1,		/* always on */
 	.id		= 0,
-	.primary	= 1,
+	.type		= CLK_TYPE_PRIMARY,
 };
 static struct clk main_clk = {
 	.name		= "main",
 	.pmc_mask	= AT91_PMC_MOSCS,	/* in PMC_SR */
 	.id		= 1,
-	.primary	= 1,
+	.type		= CLK_TYPE_PRIMARY,
 };
 static struct clk plla = {
 	.name		= "plla",
 	.parent		= &main_clk,
 	.pmc_mask	= AT91_PMC_LOCKA,	/* in PMC_SR */
 	.id		= 2,
-	.primary	= 1,
-	.pll		= 1,
+	.type		= CLK_TYPE_PRIMARY | CLK_TYPE_PLL,
 };
 
 static void pllb_mode(struct clk *clk, int is_on)
@@ -94,6 +85,7 @@ static void pllb_mode(struct clk *clk, int is_on)
 	} else
 		value = 0;
 
+	// REVISIT: Add work-around for AT91RM9200 Errata #26 ?
 	at91_sys_write(AT91_CKGR_PLLBR, value);
 
 	do {
@@ -107,8 +99,7 @@ static struct clk pllb = {
 	.pmc_mask	= AT91_PMC_LOCKB,	/* in PMC_SR */
 	.mode		= pllb_mode,
 	.id		= 3,
-	.primary	= 1,
-	.pll		= 1,
+	.type		= CLK_TYPE_PRIMARY | CLK_TYPE_PLL,
 };
 
 static void pmc_sys_mode(struct clk *clk, int is_on)
@@ -133,41 +124,6 @@ static struct clk uhpck = {
 	.mode		= pmc_sys_mode,
 };
 
-#ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS
-/*
- * The four programmable clocks can be parented by any primary clock.
- * You must configure pin multiplexing to bring these signals out.
- */
-static struct clk pck0 = {
-	.name		= "pck0",
-	.pmc_mask	= AT91_PMC_PCK0,
-	.mode		= pmc_sys_mode,
-	.programmable	= 1,
-	.id		= 0,
-};
-static struct clk pck1 = {
-	.name		= "pck1",
-	.pmc_mask	= AT91_PMC_PCK1,
-	.mode		= pmc_sys_mode,
-	.programmable	= 1,
-	.id		= 1,
-};
-static struct clk pck2 = {
-	.name		= "pck2",
-	.pmc_mask	= AT91_PMC_PCK2,
-	.mode		= pmc_sys_mode,
-	.programmable	= 1,
-	.id		= 2,
-};
-static struct clk pck3 = {
-	.name		= "pck3",
-	.pmc_mask	= AT91_PMC_PCK3,
-	.mode		= pmc_sys_mode,
-	.programmable	= 1,
-	.id		= 3,
-};
-#endif	/* CONFIG_AT91_PROGRAMMABLE_CLOCKS */
-
 
 /*
  * The master clock is divided from the CPU clock (by 1-4).  It's used for
@@ -187,131 +143,21 @@ static void pmc_periph_mode(struct clk *clk, int is_on)
 		at91_sys_write(AT91_PMC_PCDR, clk->pmc_mask);
 }
 
-static struct clk udc_clk = {
-	.name		= "udc_clk",
-	.parent		= &mck,
-	.pmc_mask	= 1 << AT91_ID_UDP,
-	.mode		= pmc_periph_mode,
-};
-static struct clk ohci_clk = {
-	.name		= "ohci_clk",
-	.parent		= &mck,
-	.pmc_mask	= 1 << AT91_ID_UHP,
-	.mode		= pmc_periph_mode,
-};
-static struct clk ether_clk = {
-	.name		= "ether_clk",
-	.parent		= &mck,
-	.pmc_mask	= 1 << AT91_ID_EMAC,
-	.mode		= pmc_periph_mode,
-};
-static struct clk mmc_clk = {
-	.name		= "mci_clk",
-	.parent		= &mck,
-	.pmc_mask	= 1 << AT91_ID_MCI,
-	.mode		= pmc_periph_mode,
-};
-static struct clk twi_clk = {
-	.name		= "twi_clk",
-	.parent		= &mck,
-	.pmc_mask	= 1 << AT91_ID_TWI,
-	.mode		= pmc_periph_mode,
-};
-static struct clk usart0_clk = {
-	.name		= "usart0_clk",
-	.parent		= &mck,
-	.pmc_mask	= 1 << AT91_ID_US0,
-	.mode		= pmc_periph_mode,
-};
-static struct clk usart1_clk = {
-	.name		= "usart1_clk",
-	.parent		= &mck,
-	.pmc_mask	= 1 << AT91_ID_US1,
-	.mode		= pmc_periph_mode,
-};
-static struct clk usart2_clk = {
-	.name		= "usart2_clk",
-	.parent		= &mck,
-	.pmc_mask	= 1 << AT91_ID_US2,
-	.mode		= pmc_periph_mode,
-};
-static struct clk usart3_clk = {
-	.name		= "usart3_clk",
-	.parent		= &mck,
-	.pmc_mask	= 1 << AT91_ID_US3,
-	.mode		= pmc_periph_mode,
-};
-static struct clk spi_clk = {
-	.name		= "spi0_clk",
-	.parent		= &mck,
-	.pmc_mask	= 1 << AT91_ID_SPI,
-	.mode		= pmc_periph_mode,
-};
-static struct clk pioA_clk = {
-	.name		= "pioA_clk",
-	.parent		= &mck,
-	.pmc_mask	= 1 << AT91_ID_PIOA,
-	.mode		= pmc_periph_mode,
-};
-static struct clk pioB_clk = {
-	.name		= "pioB_clk",
-	.parent		= &mck,
-	.pmc_mask	= 1 << AT91_ID_PIOB,
-	.mode		= pmc_periph_mode,
-};
-static struct clk pioC_clk = {
-	.name		= "pioC_clk",
-	.parent		= &mck,
-	.pmc_mask	= 1 << AT91_ID_PIOC,
-	.mode		= pmc_periph_mode,
-};
-static struct clk pioD_clk = {
-	.name		= "pioD_clk",
-	.parent		= &mck,
-	.pmc_mask	= 1 << AT91_ID_PIOD,
-	.mode		= pmc_periph_mode,
-};
-
-static struct clk *const clock_list[] = {
-	/* four primary clocks -- MUST BE FIRST! */
-	&clk32k,
-	&main_clk,
-	&plla,
-	&pllb,
-
-	/* PLLB children (USB) */
-	&udpck,
-	&uhpck,
-
-#ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS
-	/* programmable clocks */
-	&pck0,
-	&pck1,
-	&pck2,
-	&pck3,
-#endif	/* CONFIG_AT91_PROGRAMMABLE_CLOCKS */
-
-	/* MCK and peripherals */
-	&mck,
-	&usart0_clk,
-	&usart1_clk,
-	&usart2_clk,
-	&usart3_clk,
-	&mmc_clk,
-	&udc_clk,
-	&twi_clk,
-	&spi_clk,
-	&pioA_clk,
-	&pioB_clk,
-	&pioC_clk,
-	&pioD_clk,
-	// ssc0..ssc2
-	// tc0..tc5
-	// irq0..irq6
-	&ohci_clk,
-	&ether_clk,
-};
+static struct clk __init *at91_css_to_clk(unsigned long css)
+{
+	switch (css) {
+		case AT91_PMC_CSS_SLOW:
+			return &clk32k;
+		case AT91_PMC_CSS_MAIN:
+			return &main_clk;
+		case AT91_PMC_CSS_PLLA:
+			return &plla;
+		case AT91_PMC_CSS_PLLB:
+			return &pllb;
+	}
 
+	return NULL;
+}
 
 /*
  * Associate a particular clock with a function (eg, "uart") and device.
@@ -329,14 +175,12 @@ void __init at91_clock_associate(const char *id, struct device *dev, const char
 	clk->dev = dev;
 }
 
-/* clocks are all static for now; no refcounting necessary */
+/* clocks cannot be de-registered no refcounting necessary */
 struct clk *clk_get(struct device *dev, const char *id)
 {
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(clock_list); i++) {
-		struct clk *clk = clock_list[i];
+	struct clk *clk;
 
+	list_for_each_entry(clk, &clocks, node) {
 		if (strcmp(id, clk->name) == 0)
 			return clk;
 		if (clk->function && (dev == clk->dev) && strcmp(id, clk->function) == 0)
@@ -424,7 +268,7 @@ long clk_round_rate(struct clk *clk, unsigned long rate)
 	unsigned	prescale;
 	unsigned long	actual;
 
-	if (!clk->programmable)
+	if (!clk_is_programmable(clk))
 		return -EINVAL;
 	spin_lock_irqsave(&clk_lock, flags);
 
@@ -446,7 +290,7 @@ int clk_set_rate(struct clk *clk, unsigned long rate)
 	unsigned	prescale;
 	unsigned long	actual;
 
-	if (!clk->programmable)
+	if (!clk_is_programmable(clk))
 		return -EINVAL;
 	if (clk->users)
 		return -EBUSY;
@@ -484,7 +328,7 @@ int clk_set_parent(struct clk *clk, struct clk *parent)
 
 	if (clk->users)
 		return -EBUSY;
-	if (!parent->primary || !clk->programmable)
+	if (!clk_is_primary(parent) || !clk_is_programmable(clk))
 		return -EINVAL;
 	spin_lock_irqsave(&clk_lock, flags);
 
@@ -497,6 +341,18 @@ int clk_set_parent(struct clk *clk, struct clk *parent)
 }
 EXPORT_SYMBOL(clk_set_parent);
 
+/* establish PCK0..PCK3 parentage and rate */
+static void init_programmable_clock(struct clk *clk)
+{
+	struct clk	*parent;
+	u32		pckr;
+
+	pckr = at91_sys_read(AT91_PMC_PCKR(clk->id));
+	parent = at91_css_to_clk(pckr & AT91_PMC_CSS);
+	clk->parent = parent;
+	clk->rate_hz = parent->rate_hz / (1 << ((pckr >> 2) & 3));
+}
+
 #endif	/* CONFIG_AT91_PROGRAMMABLE_CLOCKS */
 
 /*------------------------------------------------------------------------*/
@@ -506,6 +362,7 @@ EXPORT_SYMBOL(clk_set_parent);
 static int at91_clk_show(struct seq_file *s, void *unused)
 {
 	u32		scsr, pcsr, sr;
+	struct clk	*clk;
 	unsigned	i;
 
 	seq_printf(s, "SCSR = %8x\n", scsr = at91_sys_read(AT91_PMC_SCSR));
@@ -523,9 +380,8 @@ static int at91_clk_show(struct seq_file *s, void *unused)
 
 	seq_printf(s, "\n");
 
-	for (i = 0; i < ARRAY_SIZE(clock_list); i++) {
-		char		*state;
-		struct clk	*clk = clock_list[i];
+	list_for_each_entry(clk, &clocks, node) {
+		char	*state;
 
 		if (clk->mode == pmc_sys_mode)
 			state = (scsr & clk->pmc_mask) ? "on" : "off";
@@ -570,6 +426,28 @@ postcore_initcall(at91_clk_debugfs_init);
 
 /*------------------------------------------------------------------------*/
 
+/* Register a new clock */
+int __init clk_register(struct clk *clk)
+{
+	if (clk_is_peripheral(clk)) {
+		clk->parent = &mck;
+		clk->mode = pmc_periph_mode;
+		list_add_tail(&clk->node, &clocks);
+	}
+#ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS
+	else if (clk_is_programmable(clk)) {
+		clk->mode = pmc_sys_mode;
+		init_programmable_clock(clk);
+		list_add_tail(&clk->node, &clocks);
+	}
+#endif
+
+	return 0;
+}
+
+
+/*------------------------------------------------------------------------*/
+
 static u32 __init at91_pll_rate(struct clk *pll, u32 freq, u32 reg)
 {
 	unsigned mul, div;
@@ -640,20 +518,17 @@ fail:
 	return 0;
 }
 
-
 /*
  * Several unused clocks may be active.  Turn them off.
  */
-static void at91_periphclk_reset(void)
+static void __init at91_periphclk_reset(void)
 {
 	unsigned long reg;
-	int i;
+	struct clk *clk;
 
 	reg = at91_sys_read(AT91_PMC_PCSR);
 
-	for (i = 0; i < ARRAY_SIZE(clock_list); i++) {
-		struct clk	*clk = clock_list[i];
-
+	list_for_each_entry(clk, &clocks, node) {
 		if (clk->mode != pmc_periph_mode)
 			continue;
 
@@ -664,11 +539,25 @@ static void at91_periphclk_reset(void)
 	at91_sys_write(AT91_PMC_PCDR, reg);
 }
 
+static struct clk *const standard_pmc_clocks[] __initdata = {
+	/* four primary clocks */
+	&clk32k,
+	&main_clk,
+	&plla,
+	&pllb,
+
+	/* PLLB children (USB) */
+	&udpck,
+	&uhpck,
+
+	/* MCK */
+	&mck
+};
+
 int __init at91_clock_init(unsigned long main_clock)
 {
 	unsigned tmp, freq, mckr;
-
-	spin_lock_init(&clk_lock);
+	int i;
 
 	/*
 	 * When the bootloader initialized the main oscillator correctly,
@@ -709,11 +598,15 @@ int __init at91_clock_init(unsigned long main_clock)
 	 * For now, assume this parentage won't change.
 	 */
 	mckr = at91_sys_read(AT91_PMC_MCKR);
-	mck.parent = clock_list[mckr & AT91_PMC_CSS];
+	mck.parent = at91_css_to_clk(mckr & AT91_PMC_CSS);
 	freq = mck.parent->rate_hz;
 	freq /= (1 << ((mckr >> 2) & 3));		/* prescale */
 	mck.rate_hz = freq / (1 + ((mckr >> 8) & 3));	/* mdiv */
 
+	/* Register the PMC's standard clocks */
+	for (i = 0; i < ARRAY_SIZE(standard_pmc_clocks); i++)
+		list_add_tail(&standard_pmc_clocks[i]->node, &clocks);
+
 	/* MCK and CPU clock are "always on" */
 	clk_enable(&mck);
 
@@ -722,35 +615,8 @@ int __init at91_clock_init(unsigned long main_clock)
 		(unsigned) main_clock / 1000000,
 		((unsigned) main_clock % 1000000) / 1000);
 
-#ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS
-	/* establish PCK0..PCK3 parentage */
-	for (tmp = 0; tmp < ARRAY_SIZE(clock_list); tmp++) {
-		struct clk	*clk = clock_list[tmp], *parent;
-		u32		pckr;
-
-		if (!clk->programmable)
-			continue;
-
-		pckr = at91_sys_read(AT91_PMC_PCKR(clk->id));
-		parent = clock_list[pckr & AT91_PMC_CSS];
-		clk->parent = parent;
-		clk->rate_hz = parent->rate_hz / (1 << ((pckr >> 2) & 3));
-
-		if (clk->users == 0) {
-			/* not being used, so switch it off */
-			at91_sys_write(AT91_PMC_SCDR, clk->pmc_mask);
-		}
-	}
-#else
 	/* disable all programmable clocks */
 	at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK0 | AT91_PMC_PCK1 | AT91_PMC_PCK2 | AT91_PMC_PCK3);
-#endif
-
-	/* enable the PIO clocks */
-	clk_enable(&pioA_clk);
-	clk_enable(&pioB_clk);
-	clk_enable(&pioC_clk);
-	clk_enable(&pioD_clk);
 
 	/* disable all other unused peripheral clocks */
 	at91_periphclk_reset();
diff --git a/arch/arm/mach-at91rm9200/clock.h b/arch/arm/mach-at91rm9200/clock.h
new file mode 100644
index 000000000000..0592e662ab37
--- /dev/null
+++ b/arch/arm/mach-at91rm9200/clock.h
@@ -0,0 +1,30 @@
+/*
+ * linux/arch/arm/mach-at91rm9200/clock.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define CLK_TYPE_PRIMARY	0x1
+#define CLK_TYPE_PLL		0x2
+#define CLK_TYPE_PROGRAMMABLE	0x4
+#define CLK_TYPE_PERIPHERAL	0x8
+
+
+struct clk {
+	struct list_head node;
+	const char	*name;		/* unique clock name */
+	const char	*function;	/* function of the clock */
+	struct device	*dev;		/* device associated with function */
+	unsigned long	rate_hz;
+	struct clk	*parent;
+	u32		pmc_mask;
+	void		(*mode)(struct clk *, int);
+	unsigned	id:2;		/* PCK0..3, or 32k/main/a/b */
+	unsigned	type;		/* clock type */
+	u16		users;
+};
+
+
+extern int __init clk_register(struct clk *clk);
diff --git a/arch/arm/mach-at91rm9200/devices.c b/arch/arm/mach-at91rm9200/devices.c
index 4352acb88178..01525530c287 100644
--- a/arch/arm/mach-at91rm9200/devices.c
+++ b/arch/arm/mach-at91rm9200/devices.c
@@ -35,13 +35,13 @@ static struct at91_usbh_data usbh_data;
 
 static struct resource at91_usbh_resources[] = {
 	[0] = {
-		.start	= AT91_UHP_BASE,
-		.end	= AT91_UHP_BASE + SZ_1M - 1,
+		.start	= AT91RM9200_UHP_BASE,
+		.end	= AT91RM9200_UHP_BASE + SZ_1M - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start	= AT91_ID_UHP,
-		.end	= AT91_ID_UHP,
+		.start	= AT91RM9200_ID_UHP,
+		.end	= AT91RM9200_ID_UHP,
 		.flags	= IORESOURCE_IRQ,
 	},
 };
@@ -80,13 +80,13 @@ static struct at91_udc_data udc_data;
 
 static struct resource at91_udc_resources[] = {
 	[0] = {
-		.start	= AT91_BASE_UDP,
-		.end	= AT91_BASE_UDP + SZ_16K - 1,
+		.start	= AT91RM9200_BASE_UDP,
+		.end	= AT91RM9200_BASE_UDP + SZ_16K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start	= AT91_ID_UDP,
-		.end	= AT91_ID_UDP,
+		.start	= AT91RM9200_ID_UDP,
+		.end	= AT91RM9200_ID_UDP,
 		.flags	= IORESOURCE_IRQ,
 	},
 };
@@ -131,13 +131,13 @@ static struct at91_eth_data eth_data;
 
 static struct resource at91_eth_resources[] = {
 	[0] = {
-		.start	= AT91_BASE_EMAC,
-		.end	= AT91_BASE_EMAC + SZ_16K - 1,
+		.start	= AT91_VA_BASE_EMAC,
+		.end	= AT91_VA_BASE_EMAC + SZ_16K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start	= AT91_ID_EMAC,
-		.end	= AT91_ID_EMAC,
+		.start	= AT91RM9200_ID_EMAC,
+		.end	= AT91RM9200_ID_EMAC,
 		.flags	= IORESOURCE_IRQ,
 	},
 };
@@ -263,13 +263,13 @@ static struct at91_mmc_data mmc_data;
 
 static struct resource at91_mmc_resources[] = {
 	[0] = {
-		.start	= AT91_BASE_MCI,
-		.end	= AT91_BASE_MCI + SZ_16K - 1,
+		.start	= AT91RM9200_BASE_MCI,
+		.end	= AT91RM9200_BASE_MCI + SZ_16K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start	= AT91_ID_MCI,
-		.end	= AT91_ID_MCI,
+		.start	= AT91RM9200_ID_MCI,
+		.end	= AT91RM9200_ID_MCI,
 		.flags	= IORESOURCE_IRQ,
 	},
 };
@@ -423,13 +423,13 @@ static u64 spi_dmamask = 0xffffffffUL;
 
 static struct resource at91_spi_resources[] = {
 	[0] = {
-		.start	= AT91_BASE_SPI,
-		.end	= AT91_BASE_SPI + SZ_16K - 1,
+		.start	= AT91RM9200_BASE_SPI,
+		.end	= AT91RM9200_BASE_SPI + SZ_16K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start	= AT91_ID_SPI,
-		.end	= AT91_ID_SPI,
+		.start	= AT91RM9200_ID_SPI,
+		.end	= AT91RM9200_ID_SPI,
 		.flags	= IORESOURCE_IRQ,
 	},
 };
@@ -582,13 +582,13 @@ static inline void configure_dbgu_pins(void)
 
 static struct resource uart0_resources[] = {
 	[0] = {
-		.start	= AT91_BASE_US0,
-		.end	= AT91_BASE_US0 + SZ_16K - 1,
+		.start	= AT91RM9200_BASE_US0,
+		.end	= AT91RM9200_BASE_US0 + SZ_16K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start	= AT91_ID_US0,
-		.end	= AT91_ID_US0,
+		.start	= AT91RM9200_ID_US0,
+		.end	= AT91RM9200_ID_US0,
 		.flags	= IORESOURCE_IRQ,
 	},
 };
@@ -624,13 +624,13 @@ static inline void configure_usart0_pins(void)
 
 static struct resource uart1_resources[] = {
 	[0] = {
-		.start	= AT91_BASE_US1,
-		.end	= AT91_BASE_US1 + SZ_16K - 1,
+		.start	= AT91RM9200_BASE_US1,
+		.end	= AT91RM9200_BASE_US1 + SZ_16K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start	= AT91_ID_US1,
-		.end	= AT91_ID_US1,
+		.start	= AT91RM9200_ID_US1,
+		.end	= AT91RM9200_ID_US1,
 		.flags	= IORESOURCE_IRQ,
 	},
 };
@@ -665,13 +665,13 @@ static inline void configure_usart1_pins(void)
 
 static struct resource uart2_resources[] = {
 	[0] = {
-		.start	= AT91_BASE_US2,
-		.end	= AT91_BASE_US2 + SZ_16K - 1,
+		.start	= AT91RM9200_BASE_US2,
+		.end	= AT91RM9200_BASE_US2 + SZ_16K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start	= AT91_ID_US2,
-		.end	= AT91_ID_US2,
+		.start	= AT91RM9200_ID_US2,
+		.end	= AT91RM9200_ID_US2,
 		.flags	= IORESOURCE_IRQ,
 	},
 };
@@ -700,13 +700,13 @@ static inline void configure_usart2_pins(void)
 
 static struct resource uart3_resources[] = {
 	[0] = {
-		.start	= AT91_BASE_US3,
-		.end	= AT91_BASE_US3 + SZ_16K - 1,
+		.start	= AT91RM9200_BASE_US3,
+		.end	= AT91RM9200_BASE_US3 + SZ_16K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start	= AT91_ID_US3,
-		.end	= AT91_ID_US3,
+		.start	= AT91RM9200_ID_US3,
+		.end	= AT91RM9200_ID_US3,
 		.flags	= IORESOURCE_IRQ,
 	},
 };
diff --git a/arch/arm/mach-at91rm9200/generic.h b/arch/arm/mach-at91rm9200/generic.h
index 7979d8ab7e07..694e411e285f 100644
--- a/arch/arm/mach-at91rm9200/generic.h
+++ b/arch/arm/mach-at91rm9200/generic.h
@@ -8,18 +8,17 @@
  * published by the Free Software Foundation.
  */
 
+ /* Processors */
+extern void __init at91rm9200_initialize(unsigned long main_clock, unsigned short banks);
+
  /* Interrupts */
-extern void __init at91rm9200_init_irq(unsigned int priority[]);
+extern void __init at91rm9200_init_interrupts(unsigned int priority[]);
 extern void __init at91_aic_init(unsigned int priority[]);
-extern void __init at91_gpio_irq_setup(unsigned banks);
 
  /* Timer */
 struct sys_timer;
 extern struct sys_timer at91rm9200_timer;
 
- /* Memory Map */
-extern void __init at91rm9200_map_io(void);
-
  /* Clocks */
 extern int __init at91_clock_init(unsigned long main_clock);
 struct device;
@@ -29,3 +28,14 @@ extern void __init at91_clock_associate(const char *id, struct device *dev, cons
 extern void at91_irq_suspend(void);
 extern void at91_irq_resume(void);
 
+ /* GPIO */
+#define AT91RM9200_PQFP		3	/* AT91RM9200 PQFP package has 3 banks */
+#define AT91RM9200_BGA		4	/* AT91RM9200 BGA package has 4 banks */
+
+struct at91_gpio_bank {
+	unsigned short id;		/* peripheral ID */
+	unsigned long offset;		/* offset from system peripheral base */
+	struct clk *clock;		/* associated clock */
+};
+extern void __init at91_gpio_init(struct at91_gpio_bank *, int nr_banks);
+extern void __init at91_gpio_irq_setup(void);
diff --git a/arch/arm/mach-at91rm9200/gpio.c b/arch/arm/mach-at91rm9200/gpio.c
index cec199fd6721..58c9bf5e9520 100644
--- a/arch/arm/mach-at91rm9200/gpio.c
+++ b/arch/arm/mach-at91rm9200/gpio.c
@@ -9,6 +9,7 @@
  * (at your option) any later version.
  */
 
+#include <linux/clk.h>
 #include <linux/errno.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
@@ -20,12 +21,12 @@
 #include <asm/hardware.h>
 #include <asm/arch/gpio.h>
 
-static const u32 pio_controller_offset[4] = {
-	AT91_PIOA,
-	AT91_PIOB,
-	AT91_PIOC,
-	AT91_PIOD,
-};
+#include "generic.h"
+
+
+static struct at91_gpio_bank *gpio;
+static int gpio_banks;
+
 
 static inline void __iomem *pin_to_controller(unsigned pin)
 {
@@ -33,8 +34,8 @@ static inline void __iomem *pin_to_controller(unsigned pin)
 
 	pin -= PIN_BASE;
 	pin /= 32;
-	if (likely(pin < BGA_GPIO_BANKS))
-		return sys_base + pio_controller_offset[pin];
+	if (likely(pin < gpio_banks))
+		return sys_base + gpio[pin].offset;
 
 	return NULL;
 }
@@ -179,7 +180,6 @@ EXPORT_SYMBOL(at91_set_multi_drive);
 
 /*--------------------------------------------------------------------------*/
 
-
 /*
  * assuming the pin is muxed as a gpio output, set its value.
  */
@@ -216,8 +216,8 @@ EXPORT_SYMBOL(at91_get_gpio_value);
 
 #ifdef CONFIG_PM
 
-static u32 wakeups[BGA_GPIO_BANKS];
-static u32 backups[BGA_GPIO_BANKS];
+static u32 wakeups[MAX_GPIO_BANKS];
+static u32 backups[MAX_GPIO_BANKS];
 
 static int gpio_irq_set_wake(unsigned pin, unsigned state)
 {
@@ -226,7 +226,7 @@ static int gpio_irq_set_wake(unsigned pin, unsigned state)
 	pin -= PIN_BASE;
 	pin /= 32;
 
-	if (unlikely(pin >= BGA_GPIO_BANKS))
+	if (unlikely(pin >= MAX_GPIO_BANKS))
 		return -EINVAL;
 
 	if (state)
@@ -241,8 +241,8 @@ void at91_gpio_suspend(void)
 {
 	int i;
 
-	for (i = 0; i < BGA_GPIO_BANKS; i++) {
-		u32 pio = pio_controller_offset[i];
+	for (i = 0; i < gpio_banks; i++) {
+		u32 pio = gpio[i].offset;
 
 		/*
 		 * Note: drivers should have disabled GPIO interrupts that
@@ -257,14 +257,14 @@ void at91_gpio_suspend(void)
 		 * first place!
 		 */
 		backups[i] = at91_sys_read(pio + PIO_IMR);
-		at91_sys_write(pio_controller_offset[i] + PIO_IDR, backups[i]);
-		at91_sys_write(pio_controller_offset[i] + PIO_IER, wakeups[i]);
+		at91_sys_write(pio + PIO_IDR, backups[i]);
+		at91_sys_write(pio + PIO_IER, wakeups[i]);
 
 		if (!wakeups[i]) {
-			disable_irq_wake(AT91_ID_PIOA + i);
-			at91_sys_write(AT91_PMC_PCDR, 1 << (AT91_ID_PIOA + i));
+			disable_irq_wake(gpio[i].id);
+			at91_sys_write(AT91_PMC_PCDR, 1 << gpio[i].id);
 		} else {
-			enable_irq_wake(AT91_ID_PIOA + i);
+			enable_irq_wake(gpio[i].id);
 #ifdef CONFIG_PM_DEBUG
 			printk(KERN_DEBUG "GPIO-%c may wake for %08x\n", "ABCD"[i], wakeups[i]);
 #endif
@@ -276,16 +276,13 @@ void at91_gpio_resume(void)
 {
 	int i;
 
-	for (i = 0; i < BGA_GPIO_BANKS; i++) {
-		at91_sys_write(pio_controller_offset[i] + PIO_IDR, wakeups[i]);
-		at91_sys_write(pio_controller_offset[i] + PIO_IER, backups[i]);
-	}
+	for (i = 0; i < gpio_banks; i++) {
+		u32 pio = gpio[i].offset;
 
-	at91_sys_write(AT91_PMC_PCER,
-			  (1 << AT91_ID_PIOA)
-			| (1 << AT91_ID_PIOB)
-			| (1 << AT91_ID_PIOC)
-			| (1 << AT91_ID_PIOD));
+		at91_sys_write(pio + PIO_IDR, wakeups[i]);
+		at91_sys_write(pio + PIO_IER, backups[i]);
+		at91_sys_write(AT91_PMC_PCER, 1 << gpio[i].id);
+	}
 }
 
 #else
@@ -377,20 +374,25 @@ static void gpio_irq_handler(unsigned irq, struct irqdesc *desc, struct pt_regs
 	/* now it may re-trigger */
 }
 
-/* call this from board-specific init_irq */
-void __init at91_gpio_irq_setup(unsigned banks)
+/*--------------------------------------------------------------------------*/
+
+/*
+ * Called from the processor-specific init to enable GPIO interrupt support.
+ */
+void __init at91_gpio_irq_setup(void)
 {
-	unsigned	pioc, pin, id;
+	unsigned	pioc, pin;
 
-	if (banks > 4)
-		banks = 4;
-	for (pioc = 0, pin = PIN_BASE, id = AT91_ID_PIOA;
-			pioc < banks;
-			pioc++, id++) {
+	for (pioc = 0, pin = PIN_BASE;
+			pioc < gpio_banks;
+			pioc++) {
 		void __iomem	*controller;
+		unsigned	id = gpio[pioc].id;
 		unsigned	i;
 
-		controller = (void __iomem *) AT91_VA_BASE_SYS + pio_controller_offset[pioc];
+		clk_enable(gpio[pioc].clock);	/* enable PIO controller's clock */
+
+		controller = (void __iomem *) AT91_VA_BASE_SYS + gpio[pioc].offset;
 		__raw_writel(~0, controller + PIO_IDR);
 
 		set_irq_data(id, (void *) pin);
@@ -408,5 +410,16 @@ void __init at91_gpio_irq_setup(unsigned banks)
 
 		set_irq_chained_handler(id, gpio_irq_handler);
 	}
-	pr_info("AT91: %d gpio irqs in %d banks\n", pin - PIN_BASE, banks);
+	pr_info("AT91: %d gpio irqs in %d banks\n", pin - PIN_BASE, gpio_banks);
+}
+
+/*
+ * Called from the processor-specific init to enable GPIO pin support.
+ */
+void __init at91_gpio_init(struct at91_gpio_bank *data, int nr_banks)
+{
+	BUG_ON(nr_banks > MAX_GPIO_BANKS);
+
+	gpio = data;
+	gpio_banks = nr_banks;
 }
diff --git a/arch/arm/mach-at91rm9200/irq.c b/arch/arm/mach-at91rm9200/irq.c
index c3a5e777f9f8..3e488117ca91 100644
--- a/arch/arm/mach-at91rm9200/irq.c
+++ b/arch/arm/mach-at91rm9200/irq.c
@@ -34,8 +34,6 @@
 #include <asm/mach/irq.h>
 #include <asm/mach/map.h>
 
-#include "generic.h"
-
 
 static void at91_aic_mask_irq(unsigned int irq)
 {
@@ -61,12 +59,12 @@ static int at91_aic_set_type(unsigned irq, unsigned type)
 		srctype = AT91_AIC_SRCTYPE_RISING;
 		break;
 	case IRQT_LOW:
-		if ((irq > AT91_ID_FIQ) && (irq < AT91_ID_IRQ0))	/* only supported on external interrupts */
+		if ((irq > AT91_ID_FIQ) && (irq < AT91RM9200_ID_IRQ0))	/* only supported on external interrupts */
 			return -EINVAL;
 		srctype = AT91_AIC_SRCTYPE_LOW;
 		break;
 	case IRQT_FALLING:
-		if ((irq > AT91_ID_FIQ) && (irq < AT91_ID_IRQ0))	/* only supported on external interrupts */
+		if ((irq > AT91_ID_FIQ) && (irq < AT91RM9200_ID_IRQ0))	/* only supported on external interrupts */
 			return -EINVAL;
 		srctype = AT91_AIC_SRCTYPE_FALLING;
 		break;
diff --git a/arch/arm/mach-at91rm9200/pm.c b/arch/arm/mach-at91rm9200/pm.c
index 47e5480feb7e..32c95d8eaacf 100644
--- a/arch/arm/mach-at91rm9200/pm.c
+++ b/arch/arm/mach-at91rm9200/pm.c
@@ -123,13 +123,13 @@ static int at91_pm_enter(suspend_state_t state)
 			(at91_sys_read(AT91_PMC_PCSR)
 					| (1 << AT91_ID_FIQ)
 					| (1 << AT91_ID_SYS)
-					| (1 << AT91_ID_IRQ0)
-					| (1 << AT91_ID_IRQ1)
-					| (1 << AT91_ID_IRQ2)
-					| (1 << AT91_ID_IRQ3)
-					| (1 << AT91_ID_IRQ4)
-					| (1 << AT91_ID_IRQ5)
-					| (1 << AT91_ID_IRQ6))
+					| (1 << AT91RM9200_ID_IRQ0)
+					| (1 << AT91RM9200_ID_IRQ1)
+					| (1 << AT91RM9200_ID_IRQ2)
+					| (1 << AT91RM9200_ID_IRQ3)
+					| (1 << AT91RM9200_ID_IRQ4)
+					| (1 << AT91RM9200_ID_IRQ5)
+					| (1 << AT91RM9200_ID_IRQ6))
 				& at91_sys_read(AT91_AIC_IMR),
 			state);
 
diff --git a/arch/arm/mach-ep93xx/Kconfig b/arch/arm/mach-ep93xx/Kconfig
index f1b740083aee..e346b03cd921 100644
--- a/arch/arm/mach-ep93xx/Kconfig
+++ b/arch/arm/mach-ep93xx/Kconfig
@@ -15,6 +15,12 @@ config MACH_EDB9302
 	  Say 'Y' here if you want your kernel to support the Cirrus
 	  Logic EDB9302 Evaluation Board.
 
+config MACH_EDB9312
+	bool "Support Cirrus Logic EDB9312"
+	help
+	  Say 'Y' here if you want your kernel to support the Cirrus
+	  Logic EDB9312 Evaluation Board.
+
 config MACH_EDB9315
 	bool "Support Cirrus Logic EDB9315"
 	help
diff --git a/arch/arm/mach-ep93xx/Makefile b/arch/arm/mach-ep93xx/Makefile
index 1f5a6b0487ee..c2eb18b530c2 100644
--- a/arch/arm/mach-ep93xx/Makefile
+++ b/arch/arm/mach-ep93xx/Makefile
@@ -7,6 +7,7 @@ obj-n			:=
 obj-			:=
 
 obj-$(CONFIG_MACH_EDB9302)	+= edb9302.o
+obj-$(CONFIG_MACH_EDB9312)	+= edb9312.o
 obj-$(CONFIG_MACH_EDB9315)	+= edb9315.o
 obj-$(CONFIG_MACH_EDB9315A)	+= edb9315a.o
 obj-$(CONFIG_MACH_GESBC9312)	+= gesbc9312.o
diff --git a/arch/arm/mach-ep93xx/edb9312.c b/arch/arm/mach-ep93xx/edb9312.c
new file mode 100644
index 000000000000..9e399211108c
--- /dev/null
+++ b/arch/arm/mach-ep93xx/edb9312.c
@@ -0,0 +1,63 @@
+/*
+ * arch/arm/mach-ep93xx/edb9312.c
+ * Cirrus Logic EDB9312 support.
+ *
+ * Copyright (C) 2006 Infosys Technologies Limited
+ * 	Toufeeq Hussain	<toufeeq_hussain@infosys.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/mtd/physmap.h>
+#include <linux/platform_device.h>
+#include <asm/io.h>
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+static struct physmap_flash_data edb9312_flash_data = {
+	.width		= 4,
+};
+
+static struct resource edb9312_flash_resource = {
+	.start		= 0x60000000,
+	.end		= 0x61ffffff,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device edb9312_flash = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &edb9312_flash_data,
+	},
+	.num_resources	= 1,
+	.resource	= &edb9312_flash_resource,
+};
+
+static void __init edb9312_init_machine(void)
+{
+	ep93xx_init_devices();
+	platform_device_register(&edb9312_flash);
+}
+
+MACHINE_START(EDB9312, "Cirrus Logic EDB9312 Evaluation Board")
+	/* Maintainer: Toufeeq Hussain <toufeeq_hussain@infosys.com> */
+	.phys_io	= EP93XX_APB_PHYS_BASE,
+	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= 0x00000100,
+	.map_io		= ep93xx_map_io,
+	.init_irq	= ep93xx_init_irq,
+	.timer		= &ep93xx_timer,
+	.init_machine	= edb9312_init_machine,
+MACHINE_END
diff --git a/arch/arm/mach-footbridge/dc21285.c b/arch/arm/mach-footbridge/dc21285.c
index 823e25d4547e..a1ae49df5c3b 100644
--- a/arch/arm/mach-footbridge/dc21285.c
+++ b/arch/arm/mach-footbridge/dc21285.c
@@ -69,16 +69,16 @@ dc21285_read_config(struct pci_bus *bus, unsigned int devfn, int where,
 	if (addr)
 		switch (size) {
 		case 1:
-			asm("ldr%?b	%0, [%1, %2]"
-				: "=r" (v) : "r" (addr), "r" (where));
+			asm("ldrb	%0, [%1, %2]"
+				: "=r" (v) : "r" (addr), "r" (where) : "cc");
 			break;
 		case 2:
-			asm("ldr%?h	%0, [%1, %2]"
-				: "=r" (v) : "r" (addr), "r" (where));
+			asm("ldrh	%0, [%1, %2]"
+				: "=r" (v) : "r" (addr), "r" (where) : "cc");
 			break;
 		case 4:
-			asm("ldr%?	%0, [%1, %2]"
-				: "=r" (v) : "r" (addr), "r" (where));
+			asm("ldr	%0, [%1, %2]"
+				: "=r" (v) : "r" (addr), "r" (where) : "cc");
 			break;
 		}
 
@@ -103,16 +103,19 @@ dc21285_write_config(struct pci_bus *bus, unsigned int devfn, int where,
 	if (addr)
 		switch (size) {
 		case 1:
-			asm("str%?b	%0, [%1, %2]"
-				: : "r" (value), "r" (addr), "r" (where));
+			asm("strb	%0, [%1, %2]"
+				: : "r" (value), "r" (addr), "r" (where)
+				: "cc");
 			break;
 		case 2:
-			asm("str%?h	%0, [%1, %2]"
-				: : "r" (value), "r" (addr), "r" (where));
+			asm("strh	%0, [%1, %2]"
+				: : "r" (value), "r" (addr), "r" (where)
+				: "cc");
 			break;
 		case 4:
-			asm("str%?	%0, [%1, %2]"
-				: : "r" (value), "r" (addr), "r" (where));
+			asm("str	%0, [%1, %2]"
+				: : "r" (value), "r" (addr), "r" (where)
+				: "cc");
 			break;
 		}
 
diff --git a/arch/arm/mach-iop32x/Kconfig b/arch/arm/mach-iop32x/Kconfig
new file mode 100644
index 000000000000..c072d94070da
--- /dev/null
+++ b/arch/arm/mach-iop32x/Kconfig
@@ -0,0 +1,35 @@
+if ARCH_IOP32X
+
+menu "IOP32x Implementation Options"
+
+comment "IOP32x Platform Types"
+
+config MACH_GLANTANK
+	bool "Enable support for the IO-Data GLAN Tank"
+	help
+	  Say Y here if you want to run your kernel on the GLAN Tank
+	  NAS appliance or machines from IO-Data's HDL-Gxxx, HDL-GWxxx
+	  and HDL-GZxxx series.
+
+config ARCH_IQ80321
+	bool "Enable support for IQ80321"
+	help
+	  Say Y here if you want to run your kernel on the Intel IQ80321
+	  evaluation kit for the IOP321 processor.
+
+config ARCH_IQ31244
+	bool "Enable support for EP80219/IQ31244"
+	help
+	  Say Y here if you want to run your kernel on the Intel EP80219
+	  evaluation kit for the Intel 80219 processor (a IOP321 variant)
+	  or the IQ31244 evaluation kit for the IOP321 processor.
+
+config MACH_N2100
+	bool "Enable support for the Thecus n2100"
+	help
+	  Say Y here if you want to run your kernel on the Thecus n2100
+	  NAS appliance.
+
+endmenu
+
+endif
diff --git a/arch/arm/mach-iop32x/Makefile b/arch/arm/mach-iop32x/Makefile
new file mode 100644
index 000000000000..7b05b37e1f94
--- /dev/null
+++ b/arch/arm/mach-iop32x/Makefile
@@ -0,0 +1,13 @@
+#
+# Makefile for the linux kernel.
+#
+
+obj-y			:= irq.o
+obj-m			:=
+obj-n			:=
+obj-			:=
+
+obj-$(CONFIG_MACH_GLANTANK) += glantank.o
+obj-$(CONFIG_ARCH_IQ80321) += iq80321.o
+obj-$(CONFIG_ARCH_IQ31244) += iq31244.o
+obj-$(CONFIG_MACH_N2100) += n2100.o
diff --git a/arch/arm/mach-iop32x/Makefile.boot b/arch/arm/mach-iop32x/Makefile.boot
new file mode 100644
index 000000000000..47000dccd61f
--- /dev/null
+++ b/arch/arm/mach-iop32x/Makefile.boot
@@ -0,0 +1,3 @@
+   zreladdr-y	:= 0xa0008000
+params_phys-y	:= 0xa0000100
+initrd_phys-y	:= 0xa0800000
diff --git a/arch/arm/mach-iop32x/glantank.c b/arch/arm/mach-iop32x/glantank.c
new file mode 100644
index 000000000000..b9b765057dbe
--- /dev/null
+++ b/arch/arm/mach-iop32x/glantank.c
@@ -0,0 +1,195 @@
+/*
+ * arch/arm/mach-iop32x/glantank.c
+ *
+ * Board support code for the GLAN Tank.
+ *
+ * Copyright (C) 2006 Martin Michlmayr <tbm@cyrius.com>
+ * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/string.h>
+#include <linux/slab.h>
+#include <linux/serial_core.h>
+#include <linux/serial_8250.h>
+#include <linux/mtd/physmap.h>
+#include <linux/platform_device.h>
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/pci.h>
+#include <asm/mach/time.h>
+#include <asm/mach-types.h>
+#include <asm/page.h>
+
+/*
+ * GLAN Tank timer tick configuration.
+ */
+static void __init glantank_timer_init(void)
+{
+	/* 33.333 MHz crystal.  */
+	iop3xx_init_time(200000000);
+}
+
+static struct sys_timer glantank_timer = {
+	.init		= glantank_timer_init,
+	.offset		= iop3xx_gettimeoffset,
+};
+
+
+/*
+ * GLAN Tank I/O.
+ */
+static struct map_desc glantank_io_desc[] __initdata = {
+	{	/* on-board devices */
+		.virtual	= GLANTANK_UART,
+		.pfn		= __phys_to_pfn(GLANTANK_UART),
+		.length		= 0x00100000,
+		.type		= MT_DEVICE
+	},
+};
+
+void __init glantank_map_io(void)
+{
+	iop3xx_map_io();
+	iotable_init(glantank_io_desc, ARRAY_SIZE(glantank_io_desc));
+}
+
+
+/*
+ * GLAN Tank PCI.
+ */
+#define INTA	IRQ_IOP32X_XINT0
+#define INTB	IRQ_IOP32X_XINT1
+#define INTC	IRQ_IOP32X_XINT2
+#define INTD	IRQ_IOP32X_XINT3
+
+static inline int __init
+glantank_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+	static int pci_irq_table[][4] = {
+		/*
+		 * PCI IDSEL/INTPIN->INTLINE
+		 * A       B       C       D
+		 */
+		{INTD, INTD, INTD, INTD}, /* UART (8250) */
+		{INTA, INTA, INTA, INTA}, /* Ethernet (E1000) */
+		{INTB, INTB, INTB, INTB}, /* IDE (AEC6280R) */
+		{INTC, INTC, INTC, INTC}, /* USB (NEC) */
+	};
+
+	BUG_ON(pin < 1 || pin > 4);
+
+	return pci_irq_table[slot % 4][pin - 1];
+}
+
+static struct hw_pci glantank_pci __initdata = {
+	.swizzle	= pci_std_swizzle,
+	.nr_controllers = 1,
+	.setup		= iop3xx_pci_setup,
+	.preinit	= iop3xx_pci_preinit,
+	.scan		= iop3xx_pci_scan_bus,
+	.map_irq	= glantank_pci_map_irq,
+};
+
+static int __init glantank_pci_init(void)
+{
+	if (machine_is_glantank())
+		pci_common_init(&glantank_pci);
+
+	return 0;
+}
+
+subsys_initcall(glantank_pci_init);
+
+
+/*
+ * GLAN Tank machine initialization.
+ */
+static struct physmap_flash_data glantank_flash_data = {
+	.width		= 1,
+};
+
+static struct resource glantank_flash_resource = {
+	.start		= 0xf0000000,
+	.end		= 0xf007ffff,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device glantank_flash_device = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &glantank_flash_data,
+	},
+	.num_resources	= 1,
+	.resource	= &glantank_flash_resource,
+};
+
+static struct plat_serial8250_port glantank_serial_port[] = {
+	{
+		.mapbase	= GLANTANK_UART,
+		.membase	= (char *)GLANTANK_UART,
+		.irq		= IRQ_IOP32X_XINT3,
+		.flags		= UPF_SKIP_TEST,
+		.iotype		= UPIO_MEM,
+		.regshift	= 0,
+		.uartclk	= 1843200,
+	},
+	{ },
+};
+
+static struct resource glantank_uart_resource = {
+	.start		= GLANTANK_UART,
+	.end		= GLANTANK_UART + 7,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device glantank_serial_device = {
+	.name		= "serial8250",
+	.id		= PLAT8250_DEV_PLATFORM,
+	.dev		= {
+		.platform_data		= glantank_serial_port,
+	},
+	.num_resources	= 1,
+	.resource	= &glantank_uart_resource,
+};
+
+static void glantank_power_off(void)
+{
+	__raw_writeb(0x01, 0xfe8d0004);
+
+	while (1)
+		;
+}
+
+static void __init glantank_init_machine(void)
+{
+	platform_device_register(&iop3xx_i2c0_device);
+	platform_device_register(&iop3xx_i2c1_device);
+	platform_device_register(&glantank_flash_device);
+	platform_device_register(&glantank_serial_device);
+
+	pm_power_off = glantank_power_off;
+}
+
+MACHINE_START(GLANTANK, "GLAN Tank")
+	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
+	.phys_io	= GLANTANK_UART,
+	.io_pg_offst	= ((GLANTANK_UART) >> 18) & 0xfffc,
+	.boot_params	= 0xa0000100,
+	.map_io		= glantank_map_io,
+	.init_irq	= iop32x_init_irq,
+	.timer		= &glantank_timer,
+	.init_machine	= glantank_init_machine,
+MACHINE_END
diff --git a/arch/arm/mach-iop32x/iq31244.c b/arch/arm/mach-iop32x/iq31244.c
new file mode 100644
index 000000000000..be4aedfa0de6
--- /dev/null
+++ b/arch/arm/mach-iop32x/iq31244.c
@@ -0,0 +1,293 @@
+/*
+ * arch/arm/mach-iop32x/iq31244.c
+ *
+ * Board support code for the Intel EP80219 and IQ31244 platforms.
+ *
+ * Author: Rory Bolt <rorybolt@pacbell.net>
+ * Copyright (C) 2002 Rory Bolt
+ * Copyright 2003 (c) MontaVista, Software, Inc.
+ * Copyright (C) 2004 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/pm.h>
+#include <linux/string.h>
+#include <linux/slab.h>
+#include <linux/serial_core.h>
+#include <linux/serial_8250.h>
+#include <linux/mtd/physmap.h>
+#include <linux/platform_device.h>
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/pci.h>
+#include <asm/mach/time.h>
+#include <asm/mach-types.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+
+
+/*
+ * The EP80219 and IQ31244 use the same machine ID.  To find out
+ * which of the two we're running on, we look at the processor ID.
+ */
+static int is_80219(void)
+{
+	extern int processor_id;
+	return !!((processor_id & 0xffffffe0) == 0x69052e20);
+}
+
+
+/*
+ * EP80219/IQ31244 timer tick configuration.
+ */
+static void __init iq31244_timer_init(void)
+{
+	if (is_80219()) {
+		/* 33.333 MHz crystal.  */
+		iop3xx_init_time(200000000);
+	} else {
+		/* 33.000 MHz crystal.  */
+		iop3xx_init_time(198000000);
+	}
+}
+
+static struct sys_timer iq31244_timer = {
+	.init		= iq31244_timer_init,
+	.offset		= iop3xx_gettimeoffset,
+};
+
+
+/*
+ * IQ31244 I/O.
+ */
+static struct map_desc iq31244_io_desc[] __initdata = {
+	{	/* on-board devices */
+		.virtual	= IQ31244_UART,
+		.pfn		= __phys_to_pfn(IQ31244_UART),
+		.length		= 0x00100000,
+		.type		= MT_DEVICE,
+	},
+};
+
+void __init iq31244_map_io(void)
+{
+	iop3xx_map_io();
+	iotable_init(iq31244_io_desc, ARRAY_SIZE(iq31244_io_desc));
+}
+
+
+/*
+ * EP80219/IQ31244 PCI.
+ */
+static inline int __init
+ep80219_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+	int irq;
+
+	if (slot == 0) {
+		/* CFlash */
+		irq = IRQ_IOP32X_XINT1;
+	} else if (slot == 1) {
+		/* 82551 Pro 100 */
+		irq = IRQ_IOP32X_XINT0;
+	} else if (slot == 2) {
+		/* PCI-X Slot */
+		irq = IRQ_IOP32X_XINT3;
+	} else if (slot == 3) {
+		/* SATA */
+		irq = IRQ_IOP32X_XINT2;
+	} else {
+		printk(KERN_ERR "ep80219_pci_map_irq() called for unknown "
+			"device PCI:%d:%d:%d\n", dev->bus->number,
+			PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
+		irq = -1;
+	}
+
+	return irq;
+}
+
+static struct hw_pci ep80219_pci __initdata = {
+	.swizzle	= pci_std_swizzle,
+	.nr_controllers = 1,
+	.setup		= iop3xx_pci_setup,
+	.preinit	= iop3xx_pci_preinit,
+	.scan		= iop3xx_pci_scan_bus,
+	.map_irq	= ep80219_pci_map_irq,
+};
+
+static inline int __init
+iq31244_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+	int irq;
+
+	if (slot == 0) {
+		/* CFlash */
+		irq = IRQ_IOP32X_XINT1;
+	} else if (slot == 1) {
+		/* SATA */
+		irq = IRQ_IOP32X_XINT2;
+	} else if (slot == 2) {
+		/* PCI-X Slot */
+		irq = IRQ_IOP32X_XINT3;
+	} else if (slot == 3) {
+		/* 82546 GigE */
+		irq = IRQ_IOP32X_XINT0;
+	} else {
+		printk(KERN_ERR "iq31244_pci_map_irq called for unknown "
+			"device PCI:%d:%d:%d\n", dev->bus->number,
+			PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
+		irq = -1;
+	}
+
+	return irq;
+}
+
+static struct hw_pci iq31244_pci __initdata = {
+	.swizzle	= pci_std_swizzle,
+	.nr_controllers = 1,
+	.setup		= iop3xx_pci_setup,
+	.preinit	= iop3xx_pci_preinit,
+	.scan		= iop3xx_pci_scan_bus,
+	.map_irq	= iq31244_pci_map_irq,
+};
+
+static int __init iq31244_pci_init(void)
+{
+	if (machine_is_iq31244()) {
+		if (is_80219()) {
+			pci_common_init(&ep80219_pci);
+		} else {
+			pci_common_init(&iq31244_pci);
+		}
+	}
+
+	return 0;
+}
+
+subsys_initcall(iq31244_pci_init);
+
+
+/*
+ * IQ31244 machine initialisation.
+ */
+static struct physmap_flash_data iq31244_flash_data = {
+	.width		= 2,
+};
+
+static struct resource iq31244_flash_resource = {
+	.start		= 0xf0000000,
+	.end		= 0xf07fffff,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device iq31244_flash_device = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &iq31244_flash_data,
+	},
+	.num_resources	= 1,
+	.resource	= &iq31244_flash_resource,
+};
+
+static struct plat_serial8250_port iq31244_serial_port[] = {
+	{
+		.mapbase	= IQ31244_UART,
+		.membase	= (char *)IQ31244_UART,
+		.irq		= IRQ_IOP32X_XINT1,
+		.flags		= UPF_SKIP_TEST,
+		.iotype		= UPIO_MEM,
+		.regshift	= 0,
+		.uartclk	= 1843200,
+	},
+	{ },
+};
+
+static struct resource iq31244_uart_resource = {
+	.start		= IQ31244_UART,
+	.end		= IQ31244_UART + 7,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device iq31244_serial_device = {
+	.name		= "serial8250",
+	.id		= PLAT8250_DEV_PLATFORM,
+	.dev		= {
+		.platform_data		= iq31244_serial_port,
+	},
+	.num_resources	= 1,
+	.resource	= &iq31244_uart_resource,
+};
+
+/*
+ * This function will send a SHUTDOWN_COMPLETE message to the PIC
+ * controller over I2C.  We are not using the i2c subsystem since
+ * we are going to power off and it may be removed
+ */
+void ep80219_power_off(void)
+{
+	/*
+	 * Send the Address byte w/ the start condition
+	 */
+	*IOP3XX_IDBR1 = 0x60;
+	*IOP3XX_ICR1 = 0xE9;
+	mdelay(1);
+
+	/*
+	 * Send the START_MSG byte w/ no start or stop condition
+	 */
+	*IOP3XX_IDBR1 = 0x0F;
+	*IOP3XX_ICR1 = 0xE8;
+	mdelay(1);
+
+	/*
+	 * Send the SHUTDOWN_COMPLETE Message ID byte w/ no start or
+	 * stop condition
+	 */
+	*IOP3XX_IDBR1 = 0x03;
+	*IOP3XX_ICR1 = 0xE8;
+	mdelay(1);
+
+	/*
+	 * Send an ignored byte w/ stop condition
+	 */
+	*IOP3XX_IDBR1 = 0x00;
+	*IOP3XX_ICR1 = 0xEA;
+
+	while (1)
+		;
+}
+
+static void __init iq31244_init_machine(void)
+{
+	platform_device_register(&iop3xx_i2c0_device);
+	platform_device_register(&iop3xx_i2c1_device);
+	platform_device_register(&iq31244_flash_device);
+	platform_device_register(&iq31244_serial_device);
+
+	if (is_80219())
+		pm_power_off = ep80219_power_off;
+}
+
+MACHINE_START(IQ31244, "Intel IQ31244")
+	/* Maintainer: Intel Corp. */
+	.phys_io	= IQ31244_UART,
+	.io_pg_offst	= ((IQ31244_UART) >> 18) & 0xfffc,
+	.boot_params	= 0xa0000100,
+	.map_io		= iq31244_map_io,
+	.init_irq	= iop32x_init_irq,
+	.timer		= &iq31244_timer,
+	.init_machine	= iq31244_init_machine,
+MACHINE_END
diff --git a/arch/arm/mach-iop32x/iq80321.c b/arch/arm/mach-iop32x/iq80321.c
new file mode 100644
index 000000000000..1f37b5501888
--- /dev/null
+++ b/arch/arm/mach-iop32x/iq80321.c
@@ -0,0 +1,193 @@
+/*
+ * arch/arm/mach-iop32x/iq80321.c
+ *
+ * Board support code for the Intel IQ80321 platform.
+ *
+ * Author: Rory Bolt <rorybolt@pacbell.net>
+ * Copyright (C) 2002 Rory Bolt
+ * Copyright (C) 2004 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/string.h>
+#include <linux/slab.h>
+#include <linux/serial_core.h>
+#include <linux/serial_8250.h>
+#include <linux/mtd/physmap.h>
+#include <linux/platform_device.h>
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/pci.h>
+#include <asm/mach/time.h>
+#include <asm/mach-types.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+
+/*
+ * IQ80321 timer tick configuration.
+ */
+static void __init iq80321_timer_init(void)
+{
+	/* 33.333 MHz crystal.  */
+	iop3xx_init_time(200000000);
+}
+
+static struct sys_timer iq80321_timer = {
+	.init		= iq80321_timer_init,
+	.offset		= iop3xx_gettimeoffset,
+};
+
+
+/*
+ * IQ80321 I/O.
+ */
+static struct map_desc iq80321_io_desc[] __initdata = {
+ 	{	/* on-board devices */
+		.virtual	= IQ80321_UART,
+		.pfn		= __phys_to_pfn(IQ80321_UART),
+		.length		= 0x00100000,
+		.type		= MT_DEVICE,
+	},
+};
+
+void __init iq80321_map_io(void)
+{
+	iop3xx_map_io();
+	iotable_init(iq80321_io_desc, ARRAY_SIZE(iq80321_io_desc));
+}
+
+
+/*
+ * IQ80321 PCI.
+ */
+static inline int __init
+iq80321_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+	int irq;
+
+	if ((slot == 2 || slot == 6) && pin == 1) {
+		/* PCI-X Slot INTA */
+		irq = IRQ_IOP32X_XINT2;
+	} else if ((slot == 2 || slot == 6) && pin == 2) {
+		/* PCI-X Slot INTA */
+		irq = IRQ_IOP32X_XINT3;
+	} else if ((slot == 2 || slot == 6) && pin == 3) {
+		/* PCI-X Slot INTA */
+		irq = IRQ_IOP32X_XINT0;
+	} else if ((slot == 2 || slot == 6) && pin == 4) {
+		/* PCI-X Slot INTA */
+		irq = IRQ_IOP32X_XINT1;
+	} else if (slot == 4 || slot == 8) {
+		/* Gig-E */
+		irq = IRQ_IOP32X_XINT0;
+	} else {
+		printk(KERN_ERR "iq80321_pci_map_irq() called for unknown "
+			"device PCI:%d:%d:%d\n", dev->bus->number,
+			PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
+		irq = -1;
+	}
+
+	return irq;
+}
+
+static struct hw_pci iq80321_pci __initdata = {
+	.swizzle	= pci_std_swizzle,
+	.nr_controllers = 1,
+	.setup		= iop3xx_pci_setup,
+	.preinit	= iop3xx_pci_preinit,
+	.scan		= iop3xx_pci_scan_bus,
+	.map_irq	= iq80321_pci_map_irq,
+};
+
+static int __init iq80321_pci_init(void)
+{
+	if (machine_is_iq80321())
+		pci_common_init(&iq80321_pci);
+
+	return 0;
+}
+
+subsys_initcall(iq80321_pci_init);
+
+
+/*
+ * IQ80321 machine initialisation.
+ */
+static struct physmap_flash_data iq80321_flash_data = {
+	.width		= 1,
+};
+
+static struct resource iq80321_flash_resource = {
+	.start		= 0xf0000000,
+	.end		= 0xf07fffff,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device iq80321_flash_device = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &iq80321_flash_data,
+	},
+	.num_resources	= 1,
+	.resource	= &iq80321_flash_resource,
+};
+
+static struct plat_serial8250_port iq80321_serial_port[] = {
+	{
+		.mapbase	= IQ80321_UART,
+		.membase	= (char *)IQ80321_UART,
+		.irq		= IRQ_IOP32X_XINT1,
+		.flags		= UPF_SKIP_TEST,
+		.iotype		= UPIO_MEM,
+		.regshift	= 0,
+		.uartclk	= 1843200,
+	},
+	{ },
+};
+
+static struct resource iq80321_uart_resource = {
+	.start		= IQ80321_UART,
+	.end		= IQ80321_UART + 7,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device iq80321_serial_device = {
+	.name		= "serial8250",
+	.id		= PLAT8250_DEV_PLATFORM,
+	.dev		= {
+		.platform_data		= iq80321_serial_port,
+	},
+	.num_resources	= 1,
+	.resource	= &iq80321_uart_resource,
+};
+
+static void __init iq80321_init_machine(void)
+{
+	platform_device_register(&iop3xx_i2c0_device);
+	platform_device_register(&iop3xx_i2c1_device);
+	platform_device_register(&iq80321_flash_device);
+	platform_device_register(&iq80321_serial_device);
+}
+
+MACHINE_START(IQ80321, "Intel IQ80321")
+	/* Maintainer: Intel Corp. */
+	.phys_io	= IQ80321_UART,
+	.io_pg_offst	= ((IQ80321_UART) >> 18) & 0xfffc,
+	.boot_params	= 0xa0000100,
+	.map_io		= iq80321_map_io,
+	.init_irq	= iop32x_init_irq,
+	.timer		= &iq80321_timer,
+	.init_machine	= iq80321_init_machine,
+MACHINE_END
diff --git a/arch/arm/mach-iop32x/irq.c b/arch/arm/mach-iop32x/irq.c
new file mode 100644
index 000000000000..69d6302f40cf
--- /dev/null
+++ b/arch/arm/mach-iop32x/irq.c
@@ -0,0 +1,76 @@
+/*
+ * arch/arm/mach-iop32x/irq.c
+ *
+ * Generic IOP32X IRQ handling functionality
+ *
+ * Author: Rory Bolt <rorybolt@pacbell.net>
+ * Copyright (C) 2002 Rory Bolt
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <asm/mach/irq.h>
+#include <asm/irq.h>
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+
+static u32 iop32x_mask;
+
+static inline void intctl_write(u32 val)
+{
+	iop3xx_cp6_enable();
+	asm volatile("mcr p6, 0, %0, c0, c0, 0" : : "r" (val));
+	iop3xx_cp6_disable();
+}
+
+static inline void intstr_write(u32 val)
+{
+	iop3xx_cp6_enable();
+	asm volatile("mcr p6, 0, %0, c4, c0, 0" : : "r" (val));
+	iop3xx_cp6_disable();
+}
+
+static void
+iop32x_irq_mask(unsigned int irq)
+{
+	iop32x_mask &= ~(1 << irq);
+	intctl_write(iop32x_mask);
+}
+
+static void
+iop32x_irq_unmask(unsigned int irq)
+{
+	iop32x_mask |= 1 << irq;
+	intctl_write(iop32x_mask);
+}
+
+struct irq_chip ext_chip = {
+	.name	= "IOP32x",
+	.ack	= iop32x_irq_mask,
+	.mask	= iop32x_irq_mask,
+	.unmask	= iop32x_irq_unmask,
+};
+
+void __init iop32x_init_irq(void)
+{
+	int i;
+
+	intctl_write(0);
+	intstr_write(0);
+	if (machine_is_glantank() ||
+	    machine_is_iq80321() ||
+	    machine_is_iq31244() ||
+	    machine_is_n2100())
+		*IOP3XX_PCIIRSR = 0x0f;
+
+	for (i = 0; i < NR_IRQS; i++) {
+		set_irq_chip(i, &ext_chip);
+		set_irq_handler(i, do_level_IRQ);
+		set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
+	}
+}
diff --git a/arch/arm/mach-iop32x/n2100.c b/arch/arm/mach-iop32x/n2100.c
new file mode 100644
index 000000000000..a2c94a47b2b2
--- /dev/null
+++ b/arch/arm/mach-iop32x/n2100.c
@@ -0,0 +1,251 @@
+/*
+ * arch/arm/mach-iop32x/n2100.c
+ *
+ * Board support code for the Thecus N2100 platform.
+ *
+ * Author: Rory Bolt <rorybolt@pacbell.net>
+ * Copyright (C) 2002 Rory Bolt
+ * Copyright 2003 (c) MontaVista, Software, Inc.
+ * Copyright (C) 2004 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/pm.h>
+#include <linux/string.h>
+#include <linux/slab.h>
+#include <linux/serial_core.h>
+#include <linux/serial_8250.h>
+#include <linux/mtd/physmap.h>
+#include <linux/platform_device.h>
+#include <linux/reboot.h>
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/pci.h>
+#include <asm/mach/time.h>
+#include <asm/mach-types.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+
+/*
+ * N2100 timer tick configuration.
+ */
+static void __init n2100_timer_init(void)
+{
+	/* 33.000 MHz crystal.  */
+	iop3xx_init_time(198000000);
+}
+
+static struct sys_timer n2100_timer = {
+	.init		= n2100_timer_init,
+	.offset		= iop3xx_gettimeoffset,
+};
+
+
+/*
+ * N2100 I/O.
+ */
+static struct map_desc n2100_io_desc[] __initdata = {
+	{	/* on-board devices */
+		.virtual	= N2100_UART,
+		.pfn		= __phys_to_pfn(N2100_UART),
+		.length		= 0x00100000,
+		.type		= MT_DEVICE
+	},
+};
+
+void __init n2100_map_io(void)
+{
+	iop3xx_map_io();
+	iotable_init(n2100_io_desc, ARRAY_SIZE(n2100_io_desc));
+}
+
+
+/*
+ * N2100 PCI.
+ */
+static inline int __init
+n2100_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+	int irq;
+
+	if (PCI_SLOT(dev->devfn) == 1) {
+		/* RTL8110SB #1 */
+		irq = IRQ_IOP32X_XINT0;
+	} else if (PCI_SLOT(dev->devfn) == 2) {
+		/* RTL8110SB #2 */
+		irq = IRQ_IOP32X_XINT1;
+	} else if (PCI_SLOT(dev->devfn) == 3) {
+		/* Sil3512 */
+		irq = IRQ_IOP32X_XINT2;
+	} else if (PCI_SLOT(dev->devfn) == 4 && pin == 1) {
+		/* VT6212 INTA */
+		irq = IRQ_IOP32X_XINT1;
+	} else if (PCI_SLOT(dev->devfn) == 4 && pin == 2) {
+		/* VT6212 INTB */
+		irq = IRQ_IOP32X_XINT0;
+	} else if (PCI_SLOT(dev->devfn) == 4 && pin == 3) {
+		/* VT6212 INTC */
+		irq = IRQ_IOP32X_XINT2;
+	} else if (PCI_SLOT(dev->devfn) == 5) {
+		/* Mini-PCI slot */
+		irq = IRQ_IOP32X_XINT3;
+	} else {
+		printk(KERN_ERR "n2100_pci_map_irq() called for unknown "
+			"device PCI:%d:%d:%d\n", dev->bus->number,
+			PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
+		irq = -1;
+	}
+
+	return irq;
+}
+
+static struct hw_pci n2100_pci __initdata = {
+	.swizzle	= pci_std_swizzle,
+	.nr_controllers = 1,
+	.setup		= iop3xx_pci_setup,
+	.preinit	= iop3xx_pci_preinit,
+	.scan		= iop3xx_pci_scan_bus,
+	.map_irq	= n2100_pci_map_irq,
+};
+
+static int __init n2100_pci_init(void)
+{
+	if (machine_is_n2100())
+		pci_common_init(&n2100_pci);
+
+	return 0;
+}
+
+subsys_initcall(n2100_pci_init);
+
+
+/*
+ * N2100 machine initialisation.
+ */
+static struct physmap_flash_data n2100_flash_data = {
+	.width		= 2,
+};
+
+static struct resource n2100_flash_resource = {
+	.start		= 0xf0000000,
+	.end		= 0xf0ffffff,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device n2100_flash_device = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &n2100_flash_data,
+	},
+	.num_resources	= 1,
+	.resource	= &n2100_flash_resource,
+};
+
+
+static struct plat_serial8250_port n2100_serial_port[] = {
+	{
+		.mapbase	= N2100_UART,
+		.membase	= (char *)N2100_UART,
+		.irq		= 0,
+		.flags		= UPF_SKIP_TEST,
+		.iotype		= UPIO_MEM,
+		.regshift	= 0,
+		.uartclk	= 1843200,
+	},
+	{ },
+};
+
+static struct resource n2100_uart_resource = {
+	.start		= N2100_UART,
+	.end		= N2100_UART + 7,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device n2100_serial_device = {
+	.name		= "serial8250",
+	.id		= PLAT8250_DEV_PLATFORM,
+	.dev		= {
+		.platform_data		= n2100_serial_port,
+	},
+	.num_resources	= 1,
+	.resource	= &n2100_uart_resource,
+};
+
+
+/*
+ * Pull PCA9532 GPIO #8 low to power off the machine.
+ */
+static void n2100_power_off(void)
+{
+	local_irq_disable();
+
+	/* Start condition, I2C address of PCA9532, write transaction.  */
+	*IOP3XX_IDBR0 = 0xc0;
+	*IOP3XX_ICR0 = 0xe9;
+	mdelay(1);
+
+	/* Write address 0x08.  */
+	*IOP3XX_IDBR0 = 0x08;
+	*IOP3XX_ICR0 = 0xe8;
+	mdelay(1);
+
+	/* Write data 0x01, stop condition.  */
+	*IOP3XX_IDBR0 = 0x01;
+	*IOP3XX_ICR0 = 0xea;
+
+	while (1)
+		;
+}
+
+
+static struct timer_list power_button_poll_timer;
+
+static void power_button_poll(unsigned long dummy)
+{
+	if (gpio_line_get(N2100_POWER_BUTTON) == 0) {
+		ctrl_alt_del();
+		return;
+	}
+
+	power_button_poll_timer.expires = jiffies + (HZ / 10);
+	add_timer(&power_button_poll_timer);
+}
+
+
+static void __init n2100_init_machine(void)
+{
+	platform_device_register(&iop3xx_i2c0_device);
+	platform_device_register(&n2100_flash_device);
+	platform_device_register(&n2100_serial_device);
+
+	pm_power_off = n2100_power_off;
+
+	init_timer(&power_button_poll_timer);
+	power_button_poll_timer.function = power_button_poll;
+	power_button_poll_timer.expires = jiffies + (HZ / 10);
+	add_timer(&power_button_poll_timer);
+}
+
+MACHINE_START(N2100, "Thecus N2100")
+	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
+	.phys_io	= N2100_UART,
+	.io_pg_offst	= ((N2100_UART) >> 18) & 0xfffc,
+	.boot_params	= 0xa0000100,
+	.map_io		= n2100_map_io,
+	.init_irq	= iop32x_init_irq,
+	.timer		= &n2100_timer,
+	.init_machine	= n2100_init_machine,
+MACHINE_END
diff --git a/arch/arm/mach-iop33x/Kconfig b/arch/arm/mach-iop33x/Kconfig
new file mode 100644
index 000000000000..9aa016bb18f9
--- /dev/null
+++ b/arch/arm/mach-iop33x/Kconfig
@@ -0,0 +1,21 @@
+if ARCH_IOP33X
+
+menu "IOP33x Implementation Options"
+
+comment "IOP33x Platform Types"
+
+config ARCH_IQ80331
+	bool "Enable support for IQ80331"
+	help
+	  Say Y here if you want to run your kernel on the Intel IQ80331
+	  evaluation kit for the IOP331 chipset.
+
+config MACH_IQ80332
+	bool "Enable support for IQ80332"
+	help
+	  Say Y here if you want to run your kernel on the Intel IQ80332
+	  evaluation kit for the IOP332 chipset.
+
+endmenu
+
+endif
diff --git a/arch/arm/mach-iop33x/Makefile b/arch/arm/mach-iop33x/Makefile
new file mode 100644
index 000000000000..90081d8c9d16
--- /dev/null
+++ b/arch/arm/mach-iop33x/Makefile
@@ -0,0 +1,11 @@
+#
+# Makefile for the linux kernel.
+#
+
+obj-y			:= irq.o uart.o
+obj-m			:=
+obj-n			:=
+obj-			:=
+
+obj-$(CONFIG_ARCH_IQ80331) += iq80331.o
+obj-$(CONFIG_MACH_IQ80332) += iq80332.o
diff --git a/arch/arm/mach-iop33x/Makefile.boot b/arch/arm/mach-iop33x/Makefile.boot
new file mode 100644
index 000000000000..67039c3e0c48
--- /dev/null
+++ b/arch/arm/mach-iop33x/Makefile.boot
@@ -0,0 +1,3 @@
+   zreladdr-y	:= 0x00008000
+params_phys-y	:= 0x00000100
+initrd_phys-y	:= 0x00800000
diff --git a/arch/arm/mach-iop33x/iq80331.c b/arch/arm/mach-iop33x/iq80331.c
new file mode 100644
index 000000000000..97a7b7488264
--- /dev/null
+++ b/arch/arm/mach-iop33x/iq80331.c
@@ -0,0 +1,148 @@
+/*
+ * arch/arm/mach-iop33x/iq80331.c
+ *
+ * Board support code for the Intel IQ80331 platform.
+ *
+ * Author: Dave Jiang <dave.jiang@intel.com>
+ * Copyright (C) 2003 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/string.h>
+#include <linux/slab.h>
+#include <linux/serial_core.h>
+#include <linux/serial_8250.h>
+#include <linux/mtd/physmap.h>
+#include <linux/platform_device.h>
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/pci.h>
+#include <asm/mach/time.h>
+#include <asm/mach-types.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+
+/*
+ * IQ80331 timer tick configuration.
+ */
+static void __init iq80331_timer_init(void)
+{
+	/* D-Step parts run at a higher internal bus frequency */
+	if (*IOP3XX_ATURID >= 0xa)
+		iop3xx_init_time(333000000);
+	else
+		iop3xx_init_time(266000000);
+}
+
+static struct sys_timer iq80331_timer = {
+	.init		= iq80331_timer_init,
+	.offset		= iop3xx_gettimeoffset,
+};
+
+
+/*
+ * IQ80331 PCI.
+ */
+static inline int __init
+iq80331_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+	int irq;
+
+	if (slot == 1 && pin == 1) {
+		/* PCI-X Slot INTA */
+		irq = IRQ_IOP33X_XINT1;
+	} else if (slot == 1 && pin == 2) {
+		/* PCI-X Slot INTB */
+		irq = IRQ_IOP33X_XINT2;
+	} else if (slot == 1 && pin == 3) {
+		/* PCI-X Slot INTC */
+		irq = IRQ_IOP33X_XINT3;
+	} else if (slot == 1 && pin == 4) {
+		/* PCI-X Slot INTD */
+		irq = IRQ_IOP33X_XINT0;
+	} else if (slot == 2) {
+		/* GigE */
+		irq = IRQ_IOP33X_XINT2;
+	} else {
+		printk(KERN_ERR "iq80331_pci_map_irq() called for unknown "
+			"device PCI:%d:%d:%d\n", dev->bus->number,
+			PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
+		irq = -1;
+	}
+
+	return irq;
+}
+
+static struct hw_pci iq80331_pci __initdata = {
+	.swizzle	= pci_std_swizzle,
+	.nr_controllers = 1,
+	.setup		= iop3xx_pci_setup,
+	.preinit	= iop3xx_pci_preinit,
+	.scan		= iop3xx_pci_scan_bus,
+	.map_irq	= iq80331_pci_map_irq,
+};
+
+static int __init iq80331_pci_init(void)
+{
+	if (machine_is_iq80331())
+		pci_common_init(&iq80331_pci);
+
+	return 0;
+}
+
+subsys_initcall(iq80331_pci_init);
+
+
+/*
+ * IQ80331 machine initialisation.
+ */
+static struct physmap_flash_data iq80331_flash_data = {
+	.width		= 1,
+};
+
+static struct resource iq80331_flash_resource = {
+	.start		= 0xc0000000,
+	.end		= 0xc07fffff,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device iq80331_flash_device = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &iq80331_flash_data,
+	},
+	.num_resources	= 1,
+	.resource	= &iq80331_flash_resource,
+};
+
+static void __init iq80331_init_machine(void)
+{
+	platform_device_register(&iop3xx_i2c0_device);
+	platform_device_register(&iop3xx_i2c1_device);
+	platform_device_register(&iop33x_uart0_device);
+	platform_device_register(&iop33x_uart1_device);
+	platform_device_register(&iq80331_flash_device);
+}
+
+MACHINE_START(IQ80331, "Intel IQ80331")
+	/* Maintainer: Intel Corp. */
+	.phys_io	= 0xfefff000,
+	.io_pg_offst	= ((0xfffff000) >> 18) & 0xfffc,
+	.boot_params	= 0x00000100,
+	.map_io		= iop3xx_map_io,
+	.init_irq	= iop33x_init_irq,
+	.timer		= &iq80331_timer,
+	.init_machine	= iq80331_init_machine,
+MACHINE_END
diff --git a/arch/arm/mach-iop33x/iq80332.c b/arch/arm/mach-iop33x/iq80332.c
new file mode 100644
index 000000000000..9887bfc1c078
--- /dev/null
+++ b/arch/arm/mach-iop33x/iq80332.c
@@ -0,0 +1,148 @@
+/*
+ * arch/arm/mach-iop33x/iq80332.c
+ *
+ * Board support code for the Intel IQ80332 platform.
+ *
+ * Author: Dave Jiang <dave.jiang@intel.com>
+ * Copyright (C) 2004 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/string.h>
+#include <linux/slab.h>
+#include <linux/serial_core.h>
+#include <linux/serial_8250.h>
+#include <linux/mtd/physmap.h>
+#include <linux/platform_device.h>
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/pci.h>
+#include <asm/mach/time.h>
+#include <asm/mach-types.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+
+/*
+ * IQ80332 timer tick configuration.
+ */
+static void __init iq80332_timer_init(void)
+{
+	/* D-Step parts and the iop333 run at a higher internal bus frequency */
+	if (*IOP3XX_ATURID >= 0xa || *IOP3XX_ATUDID == 0x374)
+		iop3xx_init_time(333000000);
+	else
+		iop3xx_init_time(266000000);
+}
+
+static struct sys_timer iq80332_timer = {
+	.init		= iq80332_timer_init,
+	.offset		= iop3xx_gettimeoffset,
+};
+
+
+/*
+ * IQ80332 PCI.
+ */
+static inline int __init
+iq80332_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+	int irq;
+
+	if (slot == 4 && pin == 1) {
+		/* PCI-X Slot INTA */
+		irq = IRQ_IOP33X_XINT0;
+	} else if (slot == 4 && pin == 2) {
+		/* PCI-X Slot INTB */
+		irq = IRQ_IOP33X_XINT1;
+	} else if (slot == 4 && pin == 3) {
+		/* PCI-X Slot INTC */
+		irq = IRQ_IOP33X_XINT2;
+	} else if (slot == 4 && pin == 4) {
+		/* PCI-X Slot INTD */
+		irq = IRQ_IOP33X_XINT3;
+	} else if (slot == 6) {
+		/* GigE */
+		irq = IRQ_IOP33X_XINT2;
+	} else {
+		printk(KERN_ERR "iq80332_pci_map_irq() called for unknown "
+			"device PCI:%d:%d:%d\n", dev->bus->number,
+			PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
+		irq = -1;
+	}
+
+	return irq;
+}
+
+static struct hw_pci iq80332_pci __initdata = {
+	.swizzle	= pci_std_swizzle,
+	.nr_controllers = 1,
+	.setup		= iop3xx_pci_setup,
+	.preinit	= iop3xx_pci_preinit,
+	.scan		= iop3xx_pci_scan_bus,
+	.map_irq	= iq80332_pci_map_irq,
+};
+
+static int __init iq80332_pci_init(void)
+{
+	if (machine_is_iq80332())
+		pci_common_init(&iq80332_pci);
+
+	return 0;
+}
+
+subsys_initcall(iq80332_pci_init);
+
+
+/*
+ * IQ80332 machine initialisation.
+ */
+static struct physmap_flash_data iq80332_flash_data = {
+	.width		= 1,
+};
+
+static struct resource iq80332_flash_resource = {
+	.start		= 0xc0000000,
+	.end		= 0xc07fffff,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device iq80332_flash_device = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &iq80332_flash_data,
+	},
+	.num_resources	= 1,
+	.resource	= &iq80332_flash_resource,
+};
+
+static void __init iq80332_init_machine(void)
+{
+	platform_device_register(&iop3xx_i2c0_device);
+	platform_device_register(&iop3xx_i2c1_device);
+	platform_device_register(&iop33x_uart0_device);
+	platform_device_register(&iop33x_uart1_device);
+	platform_device_register(&iq80332_flash_device);
+}
+
+MACHINE_START(IQ80332, "Intel IQ80332")
+	/* Maintainer: Intel Corp. */
+	.phys_io	= 0xfefff000,
+	.io_pg_offst	= ((0xfffff000) >> 18) & 0xfffc,
+	.boot_params	= 0x00000100,
+	.map_io		= iop3xx_map_io,
+	.init_irq	= iop33x_init_irq,
+	.timer		= &iq80332_timer,
+	.init_machine	= iq80332_init_machine,
+MACHINE_END
diff --git a/arch/arm/mach-iop33x/irq.c b/arch/arm/mach-iop33x/irq.c
new file mode 100644
index 000000000000..63304b3d0d76
--- /dev/null
+++ b/arch/arm/mach-iop33x/irq.c
@@ -0,0 +1,127 @@
+/*
+ * arch/arm/mach-iop33x/irq.c
+ *
+ * Generic IOP331 IRQ handling functionality
+ *
+ * Author: Dave Jiang <dave.jiang@intel.com>
+ * Copyright (C) 2003 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <asm/mach/irq.h>
+#include <asm/irq.h>
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+
+static u32 iop33x_mask0;
+static u32 iop33x_mask1;
+
+static inline void intctl0_write(u32 val)
+{
+	iop3xx_cp6_enable();
+	asm volatile("mcr p6, 0, %0, c0, c0, 0" : : "r" (val));
+	iop3xx_cp6_disable();
+}
+
+static inline void intctl1_write(u32 val)
+{
+	iop3xx_cp6_enable();
+	asm volatile("mcr p6, 0, %0, c1, c0, 0" : : "r" (val));
+	iop3xx_cp6_disable();
+}
+
+static inline void intstr0_write(u32 val)
+{
+	iop3xx_cp6_enable();
+	asm volatile("mcr p6, 0, %0, c2, c0, 0" : : "r" (val));
+	iop3xx_cp6_disable();
+}
+
+static inline void intstr1_write(u32 val)
+{
+	iop3xx_cp6_enable();
+	asm volatile("mcr p6, 0, %0, c3, c0, 0" : : "r" (val));
+	iop3xx_cp6_disable();
+}
+
+static inline void intbase_write(u32 val)
+{
+	iop3xx_cp6_enable();
+	asm volatile("mcr p6, 0, %0, c12, c0, 0" : : "r" (val));
+	iop3xx_cp6_disable();
+}
+
+static inline void intsize_write(u32 val)
+{
+	iop3xx_cp6_enable();
+	asm volatile("mcr p6, 0, %0, c13, c0, 0" : : "r" (val));
+	iop3xx_cp6_disable();
+}
+
+static void
+iop33x_irq_mask1 (unsigned int irq)
+{
+	iop33x_mask0 &= ~(1 << irq);
+	intctl0_write(iop33x_mask0);
+}
+
+static void
+iop33x_irq_mask2 (unsigned int irq)
+{
+	iop33x_mask1 &= ~(1 << (irq - 32));
+	intctl1_write(iop33x_mask1);
+}
+
+static void
+iop33x_irq_unmask1(unsigned int irq)
+{
+	iop33x_mask0 |= 1 << irq;
+	intctl0_write(iop33x_mask0);
+}
+
+static void
+iop33x_irq_unmask2(unsigned int irq)
+{
+	iop33x_mask1 |= (1 << (irq - 32));
+	intctl1_write(iop33x_mask1);
+}
+
+struct irq_chip iop33x_irqchip1 = {
+	.name	= "IOP33x-1",
+	.ack	= iop33x_irq_mask1,
+	.mask	= iop33x_irq_mask1,
+	.unmask	= iop33x_irq_unmask1,
+};
+
+struct irq_chip iop33x_irqchip2 = {
+	.name	= "IOP33x-2",
+	.ack	= iop33x_irq_mask2,
+	.mask	= iop33x_irq_mask2,
+	.unmask	= iop33x_irq_unmask2,
+};
+
+void __init iop33x_init_irq(void)
+{
+	int i;
+
+	intctl0_write(0);
+	intctl1_write(0);
+	intstr0_write(0);
+	intstr1_write(0);
+	intbase_write(0);
+	intsize_write(1);
+	if (machine_is_iq80331())
+		*IOP3XX_PCIIRSR = 0x0f;
+
+	for (i = 0; i < NR_IRQS; i++) {
+		set_irq_chip(i, (i < 32) ? &iop33x_irqchip1 : &iop33x_irqchip2);
+		set_irq_handler(i, do_level_IRQ);
+		set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
+	}
+}
diff --git a/arch/arm/mach-iop33x/uart.c b/arch/arm/mach-iop33x/uart.c
new file mode 100644
index 000000000000..ac297cd0276c
--- /dev/null
+++ b/arch/arm/mach-iop33x/uart.c
@@ -0,0 +1,105 @@
+/*
+ * arch/arm/mach-iop33x/uart.c
+ *
+ * Author: Dave Jiang (dave.jiang@intel.com)
+ * Copyright (C) 2004 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/major.h>
+#include <linux/fs.h>
+#include <linux/platform_device.h>
+#include <linux/serial.h>
+#include <linux/tty.h>
+#include <linux/serial_8250.h>
+#include <asm/io.h>
+#include <asm/pgtable.h>
+#include <asm/page.h>
+#include <asm/mach/map.h>
+#include <asm/setup.h>
+#include <asm/system.h>
+#include <asm/memory.h>
+#include <asm/hardware.h>
+#include <asm/hardware/iop3xx.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#define IOP33X_UART_XTAL 33334000
+
+static struct plat_serial8250_port iop33x_uart0_data[] = {
+	{
+		.membase	= (char *)IOP33X_UART0_VIRT,
+		.mapbase	= IOP33X_UART0_PHYS,
+		.irq		= IRQ_IOP33X_UART0,
+		.uartclk	= IOP33X_UART_XTAL,
+		.regshift	= 2,
+		.iotype		= UPIO_MEM,
+		.flags		= UPF_SKIP_TEST,
+	},
+	{ },
+};
+
+static struct resource iop33x_uart0_resources[] = {
+	[0] = {
+		.start	= IOP33X_UART0_PHYS,
+		.end	= IOP33X_UART0_PHYS + 0x3f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_IOP33X_UART0,
+		.end	= IRQ_IOP33X_UART0,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device iop33x_uart0_device = {
+	.name		= "serial8250",
+	.id		= PLAT8250_DEV_PLATFORM,
+	.dev		= {
+		.platform_data		= iop33x_uart0_data,
+	},
+	.num_resources	= 2,
+	.resource	= iop33x_uart0_resources,
+};
+
+
+static struct resource iop33x_uart1_resources[] = {
+	[0] = {
+		.start	= IOP33X_UART1_PHYS,
+		.end	= IOP33X_UART1_PHYS + 0x3f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_IOP33X_UART1,
+		.end	= IRQ_IOP33X_UART1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct plat_serial8250_port iop33x_uart1_data[] = {
+	{
+		.membase	= (char *)IOP33X_UART1_VIRT,
+		.mapbase	= IOP33X_UART1_PHYS,
+		.irq		= IRQ_IOP33X_UART1,
+		.uartclk	= IOP33X_UART_XTAL,
+		.regshift	= 2,
+		.iotype		= UPIO_MEM,
+		.flags		= UPF_SKIP_TEST,
+	},
+	{ },
+};
+
+struct platform_device iop33x_uart1_device = {
+	.name		= "serial8250",
+	.id		= PLAT8250_DEV_PLATFORM1,
+	.dev		= {
+		.platform_data		= iop33x_uart1_data,
+	},
+	.num_resources	= 2,
+	.resource	= iop33x_uart1_resources,
+};
diff --git a/arch/arm/mach-iop3xx/Kconfig b/arch/arm/mach-iop3xx/Kconfig
deleted file mode 100644
index 4422f2388607..000000000000
--- a/arch/arm/mach-iop3xx/Kconfig
+++ /dev/null
@@ -1,66 +0,0 @@
-if ARCH_IOP3XX
-
-menu "IOP3xx Implementation Options"
-
-comment "IOP3xx Platform Types"
-
-config ARCH_IQ80321
-	bool "Enable support for IQ80321"
-	select ARCH_IOP321
-	help
-	  Say Y here if you want to run your kernel on the Intel IQ80321
-	  evaluation kit for the IOP321 chipset.
-
-config ARCH_IQ31244
-	bool "Enable support for IQ31244"
-	select ARCH_IOP321
-	help
-	  Say Y here if you want to run your kernel on the Intel IQ31244
-	  evaluation kit for the IOP321 chipset.
-
-config ARCH_IQ80331
-	bool "Enable support for IQ80331"
-	select ARCH_IOP331
-	help
-	  Say Y here if you want to run your kernel on the Intel IQ80331
-	  evaluation kit for the IOP331 chipset.
-
-config MACH_IQ80332
-	bool "Enable support for IQ80332"
-	select ARCH_IOP331
-	help
-	  Say Y here if you want to run your kernel on the Intel IQ80332
-	  evaluation kit for the IOP332 chipset.
-
-config ARCH_EP80219
-	bool "Enable support for EP80219"
-	select ARCH_IOP321
-	select ARCH_IQ31244
-	help
-	  Say Y here if you want to run your kernel on the Intel EP80219
-	  evaluation kit for the Intel 80219 chipset (a IOP321 variant).
-
-# Which IOP variant are we running?
-config ARCH_IOP321
-	bool
-	help
-	  The IQ80321 uses the IOP321 variant.
-	  The IQ31244 and EP80219 uses the IOP321 variant.
-
-config ARCH_IOP331
-	bool
-	default ARCH_IQ80331
-	help
-	  The IQ80331, IQ80332, and IQ80333 uses the IOP331 variant.
-
-comment "IOP3xx Chipset Features"
-
-config IOP331_STEPD
-	bool "Chip stepping D of the IOP80331 processor or IOP80333"
-	depends on (ARCH_IOP331)
-	help
-	  Say Y here if you have StepD of the IOP80331 or IOP8033
-	  based platforms.
-
-endmenu
-endif
diff --git a/arch/arm/mach-iop3xx/Makefile b/arch/arm/mach-iop3xx/Makefile
deleted file mode 100644
index b17eb1f46102..000000000000
--- a/arch/arm/mach-iop3xx/Makefile
+++ /dev/null
@@ -1,23 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-# Object file lists.
-
-obj-y			:= common.o
-
-obj-m			:=
-obj-n			:=
-obj-			:=
-
-obj-$(CONFIG_ARCH_IOP321)  += iop321-setup.o iop321-irq.o iop321-pci.o iop321-time.o
-
-obj-$(CONFIG_ARCH_IOP331)  += iop331-setup.o iop331-irq.o iop331-pci.o iop331-time.o
-
-obj-$(CONFIG_ARCH_IQ80321) += iq80321-mm.o iq80321-pci.o
-
-obj-$(CONFIG_ARCH_IQ31244) += iq31244-mm.o iq31244-pci.o
-
-obj-$(CONFIG_ARCH_IQ80331) += iq80331-mm.o iq80331-pci.o
-
-obj-$(CONFIG_MACH_IQ80332) += iq80332-mm.o iq80332-pci.o
diff --git a/arch/arm/mach-iop3xx/Makefile.boot b/arch/arm/mach-iop3xx/Makefile.boot
deleted file mode 100644
index 6387aa20461b..000000000000
--- a/arch/arm/mach-iop3xx/Makefile.boot
+++ /dev/null
@@ -1,9 +0,0 @@
-   zreladdr-y	:= 0xa0008000
-params_phys-y	:= 0xa0000100
-initrd_phys-y	:= 0xa0800000
-ifeq ($(CONFIG_ARCH_IOP331),y)
-   zreladdr-y	:= 0x00008000
-params_phys-y	:= 0x00000100
-initrd_phys-y	:= 0x00800000
-endif
-
diff --git a/arch/arm/mach-iop3xx/common.c b/arch/arm/mach-iop3xx/common.c
deleted file mode 100644
index d7f50e57e753..000000000000
--- a/arch/arm/mach-iop3xx/common.c
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- * arch/arm/mach-iop3xx/common.c
- *
- * Common routines shared across all IOP3xx implementations
- *
- * Author: Deepak Saxena <dsaxena@mvista.com>
- *
- * Copyright 2003 (c) MontaVista, Software, Inc.
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/delay.h>
-#include <asm/hardware.h>
-
-/*
- * Shared variables
- */
-unsigned long iop3xx_pcibios_min_io = 0;
-unsigned long iop3xx_pcibios_min_mem = 0;
-
-#ifdef CONFIG_ARCH_EP80219
-#include <linux/kernel.h>
-/*
- * Default power-off for EP80219
- */
-
-static inline void ep80219_send_to_pic(__u8 c) {
-}
-
-void ep80219_power_off(void)
-{
-	/*
-     * This function will send a SHUTDOWN_COMPLETE message to the PIC controller
-     * over I2C.  We are not using the i2c subsystem since we are going to power
-     * off and it may be removed
-     */
-
-	/* Send the Address byte w/ the start condition */
-	*IOP321_IDBR1 = 0x60;
-	*IOP321_ICR1 = 0xE9;
-    mdelay(1);
-
-	/* Send the START_MSG byte w/ no start or stop condition */
-	*IOP321_IDBR1 = 0x0F;
-	*IOP321_ICR1 = 0xE8;
-    mdelay(1);
-
-	/* Send the SHUTDOWN_COMPLETE Message ID byte w/ no start or stop condition */
-	*IOP321_IDBR1 = 0x03;
-	*IOP321_ICR1 = 0xE8;
-    mdelay(1);
-
-	/* Send an ignored byte w/ stop condition */
-	*IOP321_IDBR1 = 0x00;
-	*IOP321_ICR1 = 0xEA;
-
-	while (1) ;
-}
-
-#include <linux/init.h>
-#include <linux/pm.h>
-
-static int __init ep80219_init(void)
-{
-	pm_power_off = ep80219_power_off;
-	return 0;
-}
-arch_initcall(ep80219_init);
-#endif
diff --git a/arch/arm/mach-iop3xx/iop321-irq.c b/arch/arm/mach-iop3xx/iop321-irq.c
deleted file mode 100644
index 88ac333472c8..000000000000
--- a/arch/arm/mach-iop3xx/iop321-irq.c
+++ /dev/null
@@ -1,97 +0,0 @@
-/*
- * linux/arch/arm/mach-iop3xx/iop321-irq.c
- *
- * Generic IOP321 IRQ handling functionality
- *
- * Author: Rory Bolt <rorybolt@pacbell.net>
- * Copyright (C) 2002 Rory Bolt
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Added IOP3XX chipset and IQ80321 board masking code.
- *
- */
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-
-#include <asm/mach/irq.h>
-#include <asm/irq.h>
-#include <asm/hardware.h>
-
-#include <asm/mach-types.h>
-
-static u32 iop321_mask /* = 0 */;
-
-static inline void intctl_write(u32 val)
-{
-	asm volatile("mcr p6,0,%0,c0,c0,0"::"r" (val));
-}
-
-static inline void intstr_write(u32 val)
-{
-	asm volatile("mcr p6,0,%0,c4,c0,0"::"r" (val));
-}
-
-static void
-iop321_irq_mask (unsigned int irq)
-{
-
-	iop321_mask &= ~(1 << (irq - IOP321_IRQ_OFS));
-
-	intctl_write(iop321_mask);
-}
-
-static void
-iop321_irq_unmask (unsigned int irq)
-{
-	iop321_mask |= (1 << (irq - IOP321_IRQ_OFS));
-
-	intctl_write(iop321_mask);
-}
-
-struct irq_chip ext_chip = {
-	.name	= "IOP",
-	.ack    = iop321_irq_mask,
-	.mask   = iop321_irq_mask,
-	.unmask = iop321_irq_unmask,
-};
-
-void __init iop321_init_irq(void)
-{
-	unsigned int i, tmp;
-
-	/* Enable access to coprocessor 6 for dealing with IRQs.
-	 * From RMK:
-	 * Basically, the Intel documentation here is poor.  It appears that
-	 * you need to set the bit to be able to access the coprocessor from
-	 * SVC mode.  Whether that allows access from user space or not is
-	 * unclear.
-	 */
-	asm volatile (
-		"mrc p15, 0, %0, c15, c1, 0\n\t"
-		"orr %0, %0, %1\n\t"
-		"mcr p15, 0, %0, c15, c1, 0\n\t"
-		/* The action is delayed, so we have to do this: */
-		"mrc p15, 0, %0, c15, c1, 0\n\t"
-		"mov %0, %0\n\t"
-		"sub pc, pc, #4"
-		: "=r" (tmp) : "i" (1 << 6) );
-
-	intctl_write(0);		// disable all interrupts
-	intstr_write(0);		// treat all as IRQ
-	if(machine_is_iq80321() ||
-	   machine_is_iq31244()) 	// all interrupts are inputs to chip
-		*IOP321_PCIIRSR = 0x0f;
-
-	for(i = IOP321_IRQ_OFS; i < NR_IOP321_IRQS; i++)
-	{
-		set_irq_chip(i, &ext_chip);
-		set_irq_handler(i, do_level_IRQ);
-		set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
-
-	}
-}
-
diff --git a/arch/arm/mach-iop3xx/iop321-pci.c b/arch/arm/mach-iop3xx/iop321-pci.c
deleted file mode 100644
index 8ba6a0e23134..000000000000
--- a/arch/arm/mach-iop3xx/iop321-pci.c
+++ /dev/null
@@ -1,220 +0,0 @@
-/*
- * arch/arm/mach-iop3xx/iop321-pci.c
- *
- * PCI support for the Intel IOP321 chipset
- *
- * Author: Rory Bolt <rorybolt@pacbell.net>
- * Copyright (C) 2002 Rory Bolt
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/slab.h>
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
-
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/system.h>
-#include <asm/hardware.h>
-#include <asm/mach/pci.h>
-
-#include <asm/arch/iop321.h>
-
-// #define DEBUG
-
-#ifdef DEBUG
-#define  DBG(x...) printk(x)
-#else
-#define  DBG(x...) do { } while (0)
-#endif
-
-/*
- * This routine builds either a type0 or type1 configuration command.  If the
- * bus is on the 80321 then a type0 made, else a type1 is created.
- */
-static u32 iop321_cfg_address(struct pci_bus *bus, int devfn, int where)
-{
-	struct pci_sys_data *sys = bus->sysdata;
-	u32 addr;
-
-	if (sys->busnr == bus->number)
-		addr = 1 << (PCI_SLOT(devfn) + 16) | (PCI_SLOT(devfn) << 11);
-	else
-		addr = bus->number << 16 | PCI_SLOT(devfn) << 11 | 1;
-
-	addr |=	PCI_FUNC(devfn) << 8 | (where & ~3);
-
-	return addr;
-}
-
-/*
- * This routine checks the status of the last configuration cycle.  If an error
- * was detected it returns a 1, else it returns a 0.  The errors being checked
- * are parity, master abort, target abort (master and target).  These types of
- * errors occure during a config cycle where there is no device, like during
- * the discovery stage.
- */
-static int iop321_pci_status(void)
-{
-	unsigned int status;
-	int ret = 0;
-
-	/*
-	 * Check the status registers.
-	 */
-	status = *IOP321_ATUSR;
-	if (status & 0xf900)
-	{
-		DBG("\t\t\tPCI: P0 - status = 0x%08x\n", status);
-		*IOP321_ATUSR = status & 0xf900;
-		ret = 1;
-	}
-	status = *IOP321_ATUISR;
-	if (status & 0x679f)
-	{
-		DBG("\t\t\tPCI: P1 - status = 0x%08x\n", status);
-		*IOP321_ATUISR = status & 0x679f;
-		ret = 1;
-	}
-	return ret;
-}
-
-/*
- * Simply write the address register and read the configuration
- * data.  Note that the 4 nop's ensure that we are able to handle
- * a delayed abort (in theory.)
- */
-static inline u32 iop321_read(unsigned long addr)
-{
-	u32 val;
-
-	__asm__ __volatile__(
-		"str	%1, [%2]\n\t"
-		"ldr	%0, [%3]\n\t"
-		"nop\n\t"
-		"nop\n\t"
-		"nop\n\t"
-		"nop\n\t"
-		: "=r" (val)
-		: "r" (addr), "r" (IOP321_OCCAR), "r" (IOP321_OCCDR));
-
-	return val;
-}
-
-/*
- * The read routines must check the error status of the last configuration
- * cycle.  If there was an error, the routine returns all hex f's.
- */
-static int
-iop321_read_config(struct pci_bus *bus, unsigned int devfn, int where,
-		int size, u32 *value)
-{
-	unsigned long addr = iop321_cfg_address(bus, devfn, where);
-	u32 val = iop321_read(addr) >> ((where & 3) * 8);
-
-	if( iop321_pci_status() )
-		val = 0xffffffff;
-
-	*value = val;
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int
-iop321_write_config(struct pci_bus *bus, unsigned int devfn, int where,
-		int size, u32 value)
-{
-	unsigned long addr = iop321_cfg_address(bus, devfn, where);
-	u32 val;
-
-	if (size != 4) {
-		val = iop321_read(addr);
-		if (!iop321_pci_status() == 0)
-			return PCIBIOS_SUCCESSFUL;
-
-		where = (where & 3) * 8;
-
-		if (size == 1)
-			val &= ~(0xff << where);
-		else
-			val &= ~(0xffff << where);
-
-		*IOP321_OCCDR = val | value << where;
-	} else {
-		asm volatile(
-			"str	%1, [%2]\n\t"
-			"str	%0, [%3]\n\t"
-			"nop\n\t"
-			"nop\n\t"
-			"nop\n\t"
-			"nop\n\t"
-			:
-			: "r" (value), "r" (addr),
-			  "r" (IOP321_OCCAR), "r" (IOP321_OCCDR));
-	}
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static struct pci_ops iop321_ops = {
-	.read	= iop321_read_config,
-	.write	= iop321_write_config,
-};
-
-/*
- * When a PCI device does not exist during config cycles, the 80200 gets a
- * bus error instead of returning 0xffffffff. This handler simply returns.
- */
-int
-iop321_pci_abort(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
-{
-	DBG("PCI abort: address = 0x%08lx fsr = 0x%03x PC = 0x%08lx LR = 0x%08lx\n",
-		addr, fsr, regs->ARM_pc, regs->ARM_lr);
-
-	/*
-	 * If it was an imprecise abort, then we need to correct the
-	 * return address to be _after_ the instruction.
-	 */
-	if (fsr & (1 << 10))
-		regs->ARM_pc += 4;
-
-	return 0;
-}
-
-/*
- * Scan an IOP321 PCI bus.  sys->bus defines which bus we scan.
- */
-struct pci_bus *iop321_scan_bus(int nr, struct pci_sys_data *sys)
-{
-	return pci_scan_bus(sys->busnr, &iop321_ops, sys);
-}
-
-void iop321_init(void)
-{
-	DBG("PCI:  Intel 80321 PCI init code.\n");
-	DBG("ATU: IOP321_ATUCMD=0x%04x\n", *IOP321_ATUCMD);
-	DBG("ATU: IOP321_OMWTVR0=0x%04x, IOP321_OIOWTVR=0x%04x\n",
-			*IOP321_OMWTVR0,
-			*IOP321_OIOWTVR);
-	DBG("ATU: IOP321_ATUCR=0x%08x\n", *IOP321_ATUCR);
-	DBG("ATU: IOP321_IABAR0=0x%08x IOP321_IALR0=0x%08x IOP321_IATVR0=%08x\n",
-			*IOP321_IABAR0, *IOP321_IALR0, *IOP321_IATVR0);
-	DBG("ATU: IOP321_OMWTVR0=0x%08x\n", *IOP321_OMWTVR0);
-	DBG("ATU: IOP321_IABAR1=0x%08x IOP321_IALR1=0x%08x\n",
-			*IOP321_IABAR1, *IOP321_IALR1);
-	DBG("ATU: IOP321_ERBAR=0x%08x IOP321_ERLR=0x%08x IOP321_ERTVR=%08x\n",
-			*IOP321_ERBAR, *IOP321_ERLR, *IOP321_ERTVR);
-	DBG("ATU: IOP321_IABAR2=0x%08x IOP321_IALR2=0x%08x IOP321_IATVR2=%08x\n",
-			*IOP321_IABAR2, *IOP321_IALR2, *IOP321_IATVR2);
-	DBG("ATU: IOP321_IABAR3=0x%08x IOP321_IALR3=0x%08x IOP321_IATVR3=%08x\n",
-			*IOP321_IABAR3, *IOP321_IALR3, *IOP321_IATVR3);
-
-	hook_fault_code(16+6, iop321_pci_abort, SIGBUS, "imprecise external abort");
-}
-
diff --git a/arch/arm/mach-iop3xx/iop321-setup.c b/arch/arm/mach-iop3xx/iop321-setup.c
deleted file mode 100644
index b6d096903c4a..000000000000
--- a/arch/arm/mach-iop3xx/iop321-setup.c
+++ /dev/null
@@ -1,173 +0,0 @@
-/*
- * linux/arch/arm/mach-iop3xx/iop321-setup.c
- *
- * Author: Nicolas Pitre <nico@cam.org>
- * Copyright (C) 2001 MontaVista Software, Inc.
- * Copyright (C) 2004 Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/major.h>
-#include <linux/fs.h>
-#include <linux/platform_device.h>
-#include <linux/serial.h>
-#include <linux/tty.h>
-#include <linux/serial_core.h>
-
-#include <asm/io.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/mach/map.h>
-#include <asm/setup.h>
-#include <asm/system.h>
-#include <asm/memory.h>
-#include <asm/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#define IOP321_UART_XTAL 1843200
-
-/*
- * Standard IO mapping for all IOP321 based systems
- */
-static struct map_desc iop321_std_desc[] __initdata = {
-	 {	/* mem mapped registers */
-		.virtual	= IOP321_VIRT_MEM_BASE,
-		.pfn		= __phys_to_pfn(IOP321_PHYS_MEM_BASE),
-		.length		= 0x00002000,
-		.type		= MT_DEVICE
-	 }, {	/* PCI IO space */
-		.virtual	= IOP321_PCI_LOWER_IO_VA,
-		.pfn		= __phys_to_pfn(IOP321_PCI_LOWER_IO_PA),
-		.length		= IOP321_PCI_IO_WINDOW_SIZE,
-		.type		= MT_DEVICE
-	 }
-};
-
-#ifdef CONFIG_ARCH_IQ80321
-#define UARTBASE IQ80321_UART
-#define IRQ_UART IRQ_IQ80321_UART
-#endif
-
-#ifdef CONFIG_ARCH_IQ31244
-#define UARTBASE IQ31244_UART
-#define IRQ_UART IRQ_IQ31244_UART
-#endif
-
-static struct uart_port iop321_serial_ports[] = {
-	{
-		.membase	= (char*)(UARTBASE),
-		.mapbase	= (UARTBASE),
-		.irq		= IRQ_UART,
-		.flags		= UPF_SKIP_TEST,
-		.iotype		= UPIO_MEM,
-		.regshift	= 0,
-		.uartclk	= IOP321_UART_XTAL,
-		.line		= 0,
-		.type		= PORT_16550A,
-		.fifosize	= 16
-	}
-};
-
-static struct resource iop32x_i2c_0_resources[] = {
-	[0] = {
-		.start = 0xfffff680,
-		.end = 0xfffff698,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_IOP321_I2C_0,
-		.end = IRQ_IOP321_I2C_0,
-		.flags = IORESOURCE_IRQ
-	}
-};
-
-static struct resource iop32x_i2c_1_resources[] = {
-	[0] = {
-		.start = 0xfffff6a0,
-		.end = 0xfffff6b8,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_IOP321_I2C_1,
-		.end = IRQ_IOP321_I2C_1,
-		.flags = IORESOURCE_IRQ
-	}
-};
-
-static struct platform_device iop32x_i2c_0_controller = {
-	.name = "IOP3xx-I2C",
-	.id = 0,
-	.num_resources = 2,
-	.resource = iop32x_i2c_0_resources
-};
-
-static struct platform_device iop32x_i2c_1_controller = {
-	.name = "IOP3xx-I2C",
-	.id = 1,
-	.num_resources = 2,
-	.resource = iop32x_i2c_1_resources
-};
-
-static struct platform_device *iop32x_devices[] __initdata = {
-	&iop32x_i2c_0_controller,
-	&iop32x_i2c_1_controller
-};
-
-void __init iop32x_init(void)
-{
-	if(iop_is_321())
-	{
-		platform_add_devices(iop32x_devices,
-				ARRAY_SIZE(iop32x_devices));
-	}
-}
-
-void __init iop321_map_io(void)
-{
-	iotable_init(iop321_std_desc, ARRAY_SIZE(iop321_std_desc));
-	early_serial_setup(&iop321_serial_ports[0]);
-}
-
-#ifdef CONFIG_ARCH_IQ80321
-extern void iq80321_map_io(void);
-extern struct sys_timer iop321_timer;
-extern void iop321_init_time(void);
-#endif
-
-#ifdef CONFIG_ARCH_IQ31244
-extern void iq31244_map_io(void);
-extern struct sys_timer iop321_timer;
-extern void iop321_init_time(void);
-#endif
-
-#if defined(CONFIG_ARCH_IQ80321)
-MACHINE_START(IQ80321, "Intel IQ80321")
-	/* Maintainer: Intel Corporation */
-	.phys_io	= IQ80321_UART,
-	.io_pg_offst	= ((IQ80321_UART) >> 18) & 0xfffc,
-	.map_io		= iq80321_map_io,
-	.init_irq	= iop321_init_irq,
-	.timer		= &iop321_timer,
-	.boot_params	= 0xa0000100,
-	.init_machine	= iop32x_init,
-MACHINE_END
-#elif defined(CONFIG_ARCH_IQ31244)
-MACHINE_START(IQ31244, "Intel IQ31244")
-	/* Maintainer: Intel Corp. */
-	.phys_io	= IQ31244_UART,
-	.io_pg_offst	= ((IQ31244_UART) >> 18) & 0xfffc,
-	.map_io		= iq31244_map_io,
-	.init_irq	= iop321_init_irq,
-	.timer		= &iop321_timer,
-	.boot_params	= 0xa0000100,
-	.init_machine	= iop32x_init,
-MACHINE_END
-#else
-#error No machine descriptor defined for this IOP3XX implementation
-#endif
diff --git a/arch/arm/mach-iop3xx/iop321-time.c b/arch/arm/mach-iop3xx/iop321-time.c
deleted file mode 100644
index 04b1a6f7ebae..000000000000
--- a/arch/arm/mach-iop3xx/iop321-time.c
+++ /dev/null
@@ -1,108 +0,0 @@
-/*
- * arch/arm/mach-iop3xx/iop321-time.c
- *
- * Timer code for IOP321 based systems
- *
- * Author: Deepak Saxena <dsaxena@mvista.com>
- *
- * Copyright 2002-2003 MontaVista Software Inc.
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/time.h>
-#include <linux/init.h>
-#include <linux/timex.h>
-
-#include <asm/hardware.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/uaccess.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/time.h>
-
-#define IOP321_TIME_SYNC 0
-
-static inline unsigned long get_elapsed(void)
-{
-	return LATCH - *IOP321_TU_TCR0;
-}
-
-static unsigned long iop321_gettimeoffset(void)
-{
-	unsigned long elapsed, usec;
-	u32 tisr1, tisr2;
-
-	/*
-	 * If an interrupt was pending before we read the timer,
-	 * we've already wrapped.  Factor this into the time.
-	 * If an interrupt was pending after we read the timer,
-	 * it may have wrapped between checking the interrupt
-	 * status and reading the timer.  Re-read the timer to
-	 * be sure its value is after the wrap.
-	 */
-
-	asm volatile("mrc p6, 0, %0, c6, c1, 0" : "=r" (tisr1));
-	elapsed = get_elapsed();
-	asm volatile("mrc p6, 0, %0, c6, c1, 0" : "=r" (tisr2));
-
-	if(tisr1 & 1)
-		elapsed += LATCH;
-	else if (tisr2 & 1)
-		elapsed = LATCH + get_elapsed();
-
-	/*
-	 * Now convert them to usec.
-	 */
-	usec = (unsigned long)(elapsed / (CLOCK_TICK_RATE/1000000));
-
-	return usec;
-}
-
-static irqreturn_t
-iop321_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
-{
-	u32 tisr;
-
-	write_seqlock(&xtime_lock);
-
-	asm volatile("mrc p6, 0, %0, c6, c1, 0" : "=r" (tisr));
-	tisr |= 1;
-	asm volatile("mcr p6, 0, %0, c6, c1, 0" : : "r" (tisr));
-
-	timer_tick(regs);
-
-	write_sequnlock(&xtime_lock);
-
-	return IRQ_HANDLED;
-}
-
-static struct irqaction iop321_timer_irq = {
-	.name		= "IOP321 Timer Tick",
-	.handler	= iop321_timer_interrupt,
-	.flags		= IRQF_DISABLED | IRQF_TIMER,
-};
-
-static void __init iop321_timer_init(void)
-{
-	u32 timer_ctl;
-
-	setup_irq(IRQ_IOP321_TIMER0, &iop321_timer_irq);
-
-	timer_ctl = IOP321_TMR_EN | IOP321_TMR_PRIVILEGED | IOP321_TMR_RELOAD |
-			IOP321_TMR_RATIO_1_1;
-
-	asm volatile("mcr p6, 0, %0, c4, c1, 0" : : "r" (LATCH));
-
-	asm volatile("mcr p6, 0, %0, c0, c1, 0"	: : "r" (timer_ctl));
-}
-
-struct sys_timer iop321_timer = {
-	.init		= &iop321_timer_init,
-	.offset		= iop321_gettimeoffset,
-};
diff --git a/arch/arm/mach-iop3xx/iop331-irq.c b/arch/arm/mach-iop3xx/iop331-irq.c
deleted file mode 100644
index cab11722ced2..000000000000
--- a/arch/arm/mach-iop3xx/iop331-irq.c
+++ /dev/null
@@ -1,129 +0,0 @@
-/*
- * linux/arch/arm/mach-iop3xx/iop331-irq.c
- *
- * Generic IOP331 IRQ handling functionality
- *
- * Author: Dave Jiang <dave.jiang@intel.com>
- * Copyright (C) 2003 Intel Corp.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *
- */
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-
-#include <asm/mach/irq.h>
-#include <asm/irq.h>
-#include <asm/hardware.h>
-
-#include <asm/mach-types.h>
-
-static u32 iop331_mask0 = 0;
-static u32 iop331_mask1 = 0;
-
-static inline void intctl_write0(u32 val)
-{
-    // INTCTL0
-	asm volatile("mcr p6,0,%0,c0,c0,0"::"r" (val));
-}
-
-static inline void intctl_write1(u32 val)
-{
-    // INTCTL1
-    asm volatile("mcr p6,0,%0,c1,c0,0"::"r" (val));
-}
-
-static inline void intstr_write0(u32 val)
-{
-    // INTSTR0
-	asm volatile("mcr p6,0,%0,c2,c0,0"::"r" (val));
-}
-
-static inline void intstr_write1(u32 val)
-{
-    // INTSTR1
-	asm volatile("mcr p6,0,%0,c3,c0,0"::"r" (val));
-}
-
-static void
-iop331_irq_mask1 (unsigned int irq)
-{
-        iop331_mask0 &= ~(1 << (irq - IOP331_IRQ_OFS));
-        intctl_write0(iop331_mask0);
-}
-
-static void
-iop331_irq_mask2 (unsigned int irq)
-{
-        iop331_mask1 &= ~(1 << (irq - IOP331_IRQ_OFS - 32));
-        intctl_write1(iop331_mask1);
-}
-
-static void
-iop331_irq_unmask1(unsigned int irq)
-{
-        iop331_mask0 |= (1 << (irq - IOP331_IRQ_OFS));
-        intctl_write0(iop331_mask0);
-}
-
-static void
-iop331_irq_unmask2(unsigned int irq)
-{
-        iop331_mask1 |= (1 << (irq - IOP331_IRQ_OFS - 32));
-        intctl_write1(iop331_mask1);
-}
-
-struct irq_chip iop331_irqchip1 = {
-	.name	= "IOP-1",
-	.ack    = iop331_irq_mask1,
-	.mask   = iop331_irq_mask1,
-	.unmask = iop331_irq_unmask1,
-};
-
-struct irq_chip iop331_irqchip2 = {
-	.name	= "IOP-2",
-	.ack    = iop331_irq_mask2,
-	.mask   = iop331_irq_mask2,
-	.unmask = iop331_irq_unmask2,
-};
-
-void __init iop331_init_irq(void)
-{
-	unsigned int i, tmp;
-
-	/* Enable access to coprocessor 6 for dealing with IRQs.
-	 * From RMK:
-	 * Basically, the Intel documentation here is poor.  It appears that
-	 * you need to set the bit to be able to access the coprocessor from
-	 * SVC mode.  Whether that allows access from user space or not is
-	 * unclear.
-	 */
-	asm volatile (
-		"mrc p15, 0, %0, c15, c1, 0\n\t"
-		"orr %0, %0, %1\n\t"
-		"mcr p15, 0, %0, c15, c1, 0\n\t"
-		/* The action is delayed, so we have to do this: */
-		"mrc p15, 0, %0, c15, c1, 0\n\t"
-		"mov %0, %0\n\t"
-		"sub pc, pc, #4"
-		: "=r" (tmp) : "i" (1 << 6) );
-
-	intctl_write0(0);		// disable all interrupts
-    	intctl_write1(0);
-	intstr_write0(0);		// treat all as IRQ
-    	intstr_write1(0);
-	if(machine_is_iq80331()) 	// all interrupts are inputs to chip
-		*IOP331_PCIIRSR = 0x0f;
-
-	for(i = IOP331_IRQ_OFS; i < NR_IOP331_IRQS; i++)
-	{
-		set_irq_chip(i, (i < 32) ? &iop331_irqchip1 : &iop331_irqchip2);
-		set_irq_handler(i, do_level_IRQ);
-		set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
-	}
-}
-
diff --git a/arch/arm/mach-iop3xx/iop331-pci.c b/arch/arm/mach-iop3xx/iop331-pci.c
deleted file mode 100644
index 44dd213b48a3..000000000000
--- a/arch/arm/mach-iop3xx/iop331-pci.c
+++ /dev/null
@@ -1,222 +0,0 @@
-/*
- * arch/arm/mach-iop3xx/iop331-pci.c
- *
- * PCI support for the Intel IOP331 chipset
- *
- * Author: Dave Jiang (dave.jiang@intel.com)
- * Copyright (C) 2003, 2004 Intel Corp.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/slab.h>
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
-
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/system.h>
-#include <asm/hardware.h>
-#include <asm/mach/pci.h>
-
-#include <asm/arch/iop331.h>
-
-#undef DEBUG
-#undef DEBUG1
-
-#ifdef DEBUG
-#define  DBG(x...) printk(x)
-#else
-#define  DBG(x...) do { } while (0)
-#endif
-
-#ifdef DEBUG1
-#define  DBG1(x...) printk(x)
-#else
-#define  DBG1(x...) do { } while (0)
-#endif
-
-/*
- * This routine builds either a type0 or type1 configuration command.  If the
- * bus is on the 80331 then a type0 made, else a type1 is created.
- */
-static u32 iop331_cfg_address(struct pci_bus *bus, int devfn, int where)
-{
-	struct pci_sys_data *sys = bus->sysdata;
-	u32 addr;
-
-	if (sys->busnr == bus->number)
-		addr = 1 << (PCI_SLOT(devfn) + 16) | (PCI_SLOT(devfn) << 11);
-	else
-		addr = bus->number << 16 | PCI_SLOT(devfn) << 11 | 1;
-
-	addr |=	PCI_FUNC(devfn) << 8 | (where & ~3);
-
-	return addr;
-}
-
-/*
- * This routine checks the status of the last configuration cycle.  If an error
- * was detected it returns a 1, else it returns a 0.  The errors being checked
- * are parity, master abort, target abort (master and target).  These types of
- * errors occure during a config cycle where there is no device, like during
- * the discovery stage.
- */
-static int iop331_pci_status(void)
-{
-	unsigned int status;
-	int ret = 0;
-
-	/*
-	 * Check the status registers.
-	 */
-	status = *IOP331_ATUSR;
-	if (status & 0xf900)
-	{
-		DBG("\t\t\tPCI: P0 - status = 0x%08x\n", status);
-		*IOP331_ATUSR = status & 0xf900;
-		ret = 1;
-	}
-	status = *IOP331_ATUISR;
-	if (status & 0x679f)
-	{
-		DBG("\t\t\tPCI: P1 - status = 0x%08x\n", status);
-		*IOP331_ATUISR = status & 0x679f;
-		ret = 1;
-	}
-	return ret;
-}
-
-/*
- * Simply write the address register and read the configuration
- * data.  Note that the 4 nop's ensure that we are able to handle
- * a delayed abort (in theory.)
- */
-static inline u32 iop331_read(unsigned long addr)
-{
-	u32 val;
-
-	__asm__ __volatile__(
-		"str	%1, [%2]\n\t"
-		"ldr	%0, [%3]\n\t"
-		"nop\n\t"
-		"nop\n\t"
-		"nop\n\t"
-		"nop\n\t"
-		: "=r" (val)
-		: "r" (addr), "r" (IOP331_OCCAR), "r" (IOP331_OCCDR));
-
-	return val;
-}
-
-/*
- * The read routines must check the error status of the last configuration
- * cycle.  If there was an error, the routine returns all hex f's.
- */
-static int
-iop331_read_config(struct pci_bus *bus, unsigned int devfn, int where,
-		int size, u32 *value)
-{
-	unsigned long addr = iop331_cfg_address(bus, devfn, where);
-	u32 val = iop331_read(addr) >> ((where & 3) * 8);
-
-	if( iop331_pci_status() )
-		val = 0xffffffff;
-
-	*value = val;
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int
-iop331_write_config(struct pci_bus *bus, unsigned int devfn, int where,
-		int size, u32 value)
-{
-	unsigned long addr = iop331_cfg_address(bus, devfn, where);
-	u32 val;
-
-	if (size != 4) {
-		val = iop331_read(addr);
-		if (!iop331_pci_status() == 0)
-			return PCIBIOS_SUCCESSFUL;
-
-		where = (where & 3) * 8;
-
-		if (size == 1)
-			val &= ~(0xff << where);
-		else
-			val &= ~(0xffff << where);
-
-		*IOP331_OCCDR = val | value << where;
-	} else {
-		asm volatile(
-			"str	%1, [%2]\n\t"
-			"str	%0, [%3]\n\t"
-			"nop\n\t"
-			"nop\n\t"
-			"nop\n\t"
-			"nop\n\t"
-			:
-			: "r" (value), "r" (addr),
-			  "r" (IOP331_OCCAR), "r" (IOP331_OCCDR));
-	}
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static struct pci_ops iop331_ops = {
-	.read	= iop331_read_config,
-	.write	= iop331_write_config,
-};
-
-/*
- * When a PCI device does not exist during config cycles, the XScale gets a
- * bus error instead of returning 0xffffffff. This handler simply returns.
- */
-int
-iop331_pci_abort(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
-{
-	DBG("PCI abort: address = 0x%08lx fsr = 0x%03x PC = 0x%08lx LR = 0x%08lx\n",
-		addr, fsr, regs->ARM_pc, regs->ARM_lr);
-
-	/*
-	 * If it was an imprecise abort, then we need to correct the
-	 * return address to be _after_ the instruction.
-	 */
-	if (fsr & (1 << 10))
-		regs->ARM_pc += 4;
-
-	return 0;
-}
-
-/*
- * Scan an IOP331 PCI bus.  sys->bus defines which bus we scan.
- */
-struct pci_bus *iop331_scan_bus(int nr, struct pci_sys_data *sys)
-{
-	return pci_scan_bus(sys->busnr, &iop331_ops, sys);
-}
-
-void iop331_init(void)
-{
-	DBG1("PCI:  Intel 80331 PCI init code.\n");
-	DBG1("\tATU: IOP331_ATUCMD=0x%04x\n", *IOP331_ATUCMD);
-	DBG1("\tATU: IOP331_OMWTVR0=0x%04x, IOP331_OIOWTVR=0x%04x\n",
-			*IOP331_OMWTVR0,
-			*IOP331_OIOWTVR);
-	DBG1("\tATU: IOP331_OMWTVR1=0x%04x\n", *IOP331_OMWTVR1);
-	DBG1("\tATU: IOP331_ATUCR=0x%08x\n", *IOP331_ATUCR);
-	DBG1("\tATU: IOP331_IABAR0=0x%08x IOP331_IALR0=0x%08x IOP331_IATVR0=%08x\n", *IOP331_IABAR0, *IOP331_IALR0, *IOP331_IATVR0);
-	DBG1("\tATU: IOP31_IABAR1=0x%08x IOP331_IALR1=0x%08x\n", *IOP331_IABAR1, *IOP331_IALR1);
-	DBG1("\tATU: IOP331_ERBAR=0x%08x IOP331_ERLR=0x%08x IOP331_ERTVR=%08x\n", *IOP331_ERBAR, *IOP331_ERLR, *IOP331_ERTVR);
-	DBG1("\tATU: IOP331_IABAR2=0x%08x IOP331_IALR2=0x%08x IOP331_IATVR2=%08x\n", *IOP331_IABAR2, *IOP331_IALR2, *IOP331_IATVR2);
-	DBG1("\tATU: IOP331_IABAR3=0x%08x IOP331_IALR3=0x%08x IOP331_IATVR3=%08x\n", *IOP331_IABAR3, *IOP331_IALR3, *IOP331_IATVR3);
-
-	hook_fault_code(16+6, iop331_pci_abort, SIGBUS, "imprecise external abort");
-}
-
diff --git a/arch/arm/mach-iop3xx/iop331-setup.c b/arch/arm/mach-iop3xx/iop331-setup.c
deleted file mode 100644
index 3cc98d892ad4..000000000000
--- a/arch/arm/mach-iop3xx/iop331-setup.c
+++ /dev/null
@@ -1,221 +0,0 @@
-/*
- * linux/arch/arm/mach-iop3xx/iop331-setup.c
- *
- * Author: Dave Jiang (dave.jiang@intel.com)
- * Copyright (C) 2004 Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/major.h>
-#include <linux/fs.h>
-#include <linux/platform_device.h>
-#include <linux/serial.h>
-#include <linux/tty.h>
-#include <linux/serial_8250.h>
-
-#include <asm/io.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/mach/map.h>
-#include <asm/setup.h>
-#include <asm/system.h>
-#include <asm/memory.h>
-#include <asm/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#define IOP331_UART_XTAL 33334000
-
-/*
- * Standard IO mapping for all IOP331 based systems
- */
-static struct map_desc iop331_std_desc[] __initdata = {
-	{	/* mem mapped registers */
-		.virtual	= IOP331_VIRT_MEM_BASE,
-		.pfn		= __phys_to_pfn(IOP331_PHYS_MEM_BASE),
-		.length		= 0x00002000,
-		.type		= MT_DEVICE
-	}, {	/* PCI IO space */
-		.virtual	= IOP331_PCI_LOWER_IO_VA,
-		.pfn		= __phys_to_pfn(IOP331_PCI_LOWER_IO_PA),
-		.length		= IOP331_PCI_IO_WINDOW_SIZE,
-		.type		= MT_DEVICE
-	}
-};
-
-static struct resource iop33x_uart0_resources[] = {
-	[0] = {
-		.start = IOP331_UART0_PHYS,
-		.end = IOP331_UART0_PHYS + 0x3f,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_IOP331_UART0,
-		.end = IRQ_IOP331_UART0,
-		.flags = IORESOURCE_IRQ
-	}
-};
-
-static struct resource iop33x_uart1_resources[] = {
-	[0] = {
-		.start = IOP331_UART1_PHYS,
-		.end = IOP331_UART1_PHYS + 0x3f,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_IOP331_UART1,
-		.end = IRQ_IOP331_UART1,
-		.flags = IORESOURCE_IRQ
-	}
-};
-
-static struct plat_serial8250_port iop33x_uart0_data[] = {
-	{
-       .membase     = (char*)(IOP331_UART0_VIRT),
-       .mapbase     = (IOP331_UART0_PHYS),
-       .irq         = IRQ_IOP331_UART0,
-       .uartclk     = IOP331_UART_XTAL,
-       .regshift    = 2,
-       .iotype      = UPIO_MEM,
-       .flags       = UPF_SKIP_TEST,
-	},
-	{  },
-};
-
-static struct plat_serial8250_port iop33x_uart1_data[] = {
-	{
-       .membase     = (char*)(IOP331_UART1_VIRT),
-       .mapbase     = (IOP331_UART1_PHYS),
-       .irq         = IRQ_IOP331_UART1,
-       .uartclk     = IOP331_UART_XTAL,
-       .regshift    = 2,
-       .iotype      = UPIO_MEM,
-       .flags       = UPF_SKIP_TEST,
-	},
-	{  },
-};
-
-static struct platform_device iop33x_uart0 = {
-       .name = "serial8250",
-       .id = PLAT8250_DEV_PLATFORM,
-       .dev.platform_data = iop33x_uart0_data,
-       .num_resources = 2,
-       .resource = iop33x_uart0_resources,
-};
-
-static struct platform_device iop33x_uart1 = {
-       .name = "serial8250",
-       .id = PLAT8250_DEV_PLATFORM1,
-       .dev.platform_data = iop33x_uart1_data,
-       .num_resources = 2,
-       .resource = iop33x_uart1_resources,
-};
-
-static struct resource iop33x_i2c_0_resources[] = {
-	[0] = {
-		.start = 0xfffff680,
-		.end = 0xfffff698,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_IOP331_I2C_0,
-		.end = IRQ_IOP331_I2C_0,
-		.flags = IORESOURCE_IRQ
-	}
-};
-
-static struct resource iop33x_i2c_1_resources[] = {
-	[0] = {
-		.start = 0xfffff6a0,
-		.end = 0xfffff6b8,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_IOP331_I2C_1,
-		.end = IRQ_IOP331_I2C_1,
-		.flags = IORESOURCE_IRQ
-	}
-};
-
-static struct platform_device iop33x_i2c_0_controller = {
-	.name = "IOP3xx-I2C",
-	.id = 0,
-	.num_resources = 2,
-	.resource = iop33x_i2c_0_resources
-};
-
-static struct platform_device iop33x_i2c_1_controller = {
-	.name = "IOP3xx-I2C",
-	.id = 1,
-	.num_resources = 2,
-	.resource = iop33x_i2c_1_resources
-};
-
-static struct platform_device *iop33x_devices[] __initdata = {
-	&iop33x_uart0,
-	&iop33x_uart1,
-	&iop33x_i2c_0_controller,
-	&iop33x_i2c_1_controller
-};
-
-void __init iop33x_init(void)
-{
-	if(iop_is_331())
-	{
-		platform_add_devices(iop33x_devices,
-				ARRAY_SIZE(iop33x_devices));
-	}
-}
-
-void __init iop331_map_io(void)
-{
-	iotable_init(iop331_std_desc, ARRAY_SIZE(iop331_std_desc));
-}
-
-#ifdef CONFIG_ARCH_IOP331
-extern void iop331_init_irq(void);
-extern struct sys_timer iop331_timer;
-#endif
-
-#ifdef CONFIG_ARCH_IQ80331
-extern void iq80331_map_io(void);
-#endif
-
-#ifdef CONFIG_MACH_IQ80332
-extern void iq80332_map_io(void);
-#endif
-
-#if defined(CONFIG_ARCH_IQ80331)
-MACHINE_START(IQ80331, "Intel IQ80331")
-	/* Maintainer: Intel Corp. */
-	.phys_io	= 0xfefff000,
-	.io_pg_offst	= ((0xfffff000) >> 18) & 0xfffc, // virtual, physical
-	.map_io		= iq80331_map_io,
-	.init_irq	= iop331_init_irq,
-	.timer		= &iop331_timer,
-	.boot_params	= 0x0100,
-	.init_machine	= iop33x_init,
-MACHINE_END
-
-#elif defined(CONFIG_MACH_IQ80332)
-MACHINE_START(IQ80332, "Intel IQ80332")
-	/* Maintainer: Intel Corp. */
-	.phys_io	= 0xfefff000,
-	.io_pg_offst	= ((0xfffff000) >> 18) & 0xfffc, // virtual, physical
-	.map_io		= iq80332_map_io,
-	.init_irq	= iop331_init_irq,
-	.timer		= &iop331_timer,
-	.boot_params	= 0x0100,
-	.init_machine	= iop33x_init,
-MACHINE_END
-
-#else
-#error No machine descriptor defined for this IOP3XX implementation
-#endif
-
-
diff --git a/arch/arm/mach-iop3xx/iop331-time.c b/arch/arm/mach-iop3xx/iop331-time.c
deleted file mode 100644
index 0c09e74c5740..000000000000
--- a/arch/arm/mach-iop3xx/iop331-time.c
+++ /dev/null
@@ -1,106 +0,0 @@
-/*
- * arch/arm/mach-iop3xx/iop331-time.c
- *
- * Timer code for IOP331 based systems
- *
- * Author: Dave Jiang <dave.jiang@intel.com>
- *
- * Copyright 2003 Intel Corp.
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/time.h>
-#include <linux/init.h>
-#include <linux/timex.h>
-
-#include <asm/hardware.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/uaccess.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/time.h>
-
-static inline unsigned long get_elapsed(void)
-{
-	return LATCH - *IOP331_TU_TCR0;
-}
-
-static unsigned long iop331_gettimeoffset(void)
-{
-	unsigned long elapsed, usec;
-	u32 tisr1, tisr2;
-
-	/*
-	 * If an interrupt was pending before we read the timer,
-	 * we've already wrapped.  Factor this into the time.
-	 * If an interrupt was pending after we read the timer,
-	 * it may have wrapped between checking the interrupt
-	 * status and reading the timer.  Re-read the timer to
-	 * be sure its value is after the wrap.
-	 */
-
-	asm volatile("mrc p6, 0, %0, c6, c1, 0" : "=r" (tisr1));
-	elapsed = get_elapsed();
-	asm volatile("mrc p6, 0, %0, c6, c1, 0" : "=r" (tisr2));
-
-	if(tisr1 & 1)
-		elapsed += LATCH;
-	else if (tisr2 & 1)
-		elapsed = LATCH + get_elapsed();
-
-	/*
-	 * Now convert them to usec.
-	 */
-	usec = (unsigned long)(elapsed / (CLOCK_TICK_RATE/1000000));
-
-	return usec;
-}
-
-static irqreturn_t
-iop331_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
-{
-	u32 tisr;
-
-	write_seqlock(&xtime_lock);
-
-	asm volatile("mrc p6, 0, %0, c6, c1, 0" : "=r" (tisr));
-	tisr |= 1;
-	asm volatile("mcr p6, 0, %0, c6, c1, 0" : : "r" (tisr));
-
-	timer_tick(regs);
-
-	write_sequnlock(&xtime_lock);
-	return IRQ_HANDLED;
-}
-
-static struct irqaction iop331_timer_irq = {
-	.name		= "IOP331 Timer Tick",
-	.handler	= iop331_timer_interrupt,
-	.flags		= IRQF_DISABLED | IRQF_TIMER,
-};
-
-static void __init iop331_timer_init(void)
-{
-	u32 timer_ctl;
-
-	setup_irq(IRQ_IOP331_TIMER0, &iop331_timer_irq);
-
-	timer_ctl = IOP331_TMR_EN | IOP331_TMR_PRIVILEGED | IOP331_TMR_RELOAD |
-			IOP331_TMR_RATIO_1_1;
-
-	asm volatile("mcr p6, 0, %0, c4, c1, 0" : : "r" (LATCH));
-
-	asm volatile("mcr p6, 0, %0, c0, c1, 0"	: : "r" (timer_ctl));
-
-}
-
-struct sys_timer iop331_timer = {
-	.init		= iop331_timer_init,
-	.offset		= iop331_gettimeoffset,
-};
diff --git a/arch/arm/mach-iop3xx/iq31244-mm.c b/arch/arm/mach-iop3xx/iq31244-mm.c
deleted file mode 100644
index e874b54eefe3..000000000000
--- a/arch/arm/mach-iop3xx/iq31244-mm.c
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * linux/arch/arm/mach-iop3xx/mm.c
- *
- * Low level memory initialization for iq80321 platform
- *
- * Author: Rory Bolt <rorybolt@pacbell.net>
- * Copyright (C) 2002 Rory Bolt
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-
-#include <asm/io.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-
-#include <asm/mach/map.h>
-
-
-/*
- * IQ80321 specific IO mappings
- *
- * We use RedBoot's setup for the onboard devices.
- */
-static struct map_desc iq31244_io_desc[] __initdata = {
-	{	/* on-board devices */
-		.virtual	= IQ31244_UART,
-		.pfn		= __phys_to_pfn(IQ31244_UART),
-		.length		= 0x00100000,
-		.type		= MT_DEVICE
-	}
-};
-
-void __init iq31244_map_io(void)
-{
-	iop321_map_io();
-
-	iotable_init(iq31244_io_desc, ARRAY_SIZE(iq31244_io_desc));
-}
diff --git a/arch/arm/mach-iop3xx/iq31244-pci.c b/arch/arm/mach-iop3xx/iq31244-pci.c
deleted file mode 100644
index f3c6413fa5bd..000000000000
--- a/arch/arm/mach-iop3xx/iq31244-pci.c
+++ /dev/null
@@ -1,129 +0,0 @@
-/*
- * arch/arm/mach-iop3xx/iq80321-pci.c
- *
- * PCI support for the Intel IQ80321 reference board
- *
- * Author: Rory Bolt <rorybolt@pacbell.net>
- * Copyright (C) 2002 Rory Bolt
- * Copyright (C) 2004 Intel Corp.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/string.h>
-#include <linux/slab.h>
-
-#include <asm/hardware.h>
-#include <asm/irq.h>
-#include <asm/mach/pci.h>
-#include <asm/mach-types.h>
-
-/*
- * The following macro is used to lookup irqs in a standard table
- * format for those systems that do not already have PCI
- * interrupts properly routed.  We assume 1 <= pin <= 4
- */
-#define PCI_IRQ_TABLE_LOOKUP(minid,maxid)	\
-({ int _ctl_ = -1;				\
-   unsigned int _idsel = idsel - minid;		\
-   if (_idsel <= maxid)				\
-      _ctl_ = pci_irq_table[_idsel][pin-1];	\
-   _ctl_; })
-
-#define INTA	IRQ_IQ31244_INTA
-#define INTB	IRQ_IQ31244_INTB
-#define INTC	IRQ_IQ31244_INTC
-#define INTD	IRQ_IQ31244_INTD
-
-#define INTE	IRQ_IQ31244_I82546
-
-static inline int __init
-iq31244_map_irq(struct pci_dev *dev, u8 idsel, u8 pin)
-{
-	static int pci_irq_table[][4] = {
-		/*
-		 * PCI IDSEL/INTPIN->INTLINE
-		 * A       B       C       D
-		 */
-#ifdef CONFIG_ARCH_EP80219
-		{INTB, INTB, INTB, INTB}, /* CFlash */
-		{INTE, INTE, INTE, INTE}, /* 82551 Pro 100 */
-		{INTD, INTD, INTD, INTD}, /* PCI-X Slot */
-		{INTC, INTC, INTC, INTC}, /* SATA   */
-#else
-		{INTB, INTB, INTB, INTB}, /* CFlash */
-		{INTC, INTC, INTC, INTC}, /* SATA   */
-		{INTD, INTD, INTD, INTD}, /* PCI-X Slot */
-		{INTE, INTE, INTE, INTE}, /* 82546 GigE */
-#endif // CONFIG_ARCH_EP80219
-	};
-
-	BUG_ON(pin < 1 || pin > 4);
-
-	return PCI_IRQ_TABLE_LOOKUP(0, 7);
-}
-
-static int iq31244_setup(int nr, struct pci_sys_data *sys)
-{
-	struct resource *res;
-
-	if(nr != 0)
-		return 0;
-
-	res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL);
-	if (!res)
-		panic("PCI: unable to alloc resources");
-
-	res[0].start = IOP321_PCI_LOWER_IO_VA;
-	res[0].end   = IOP321_PCI_UPPER_IO_VA;
-	res[0].name  = "IQ31244 PCI I/O Space";
-	res[0].flags = IORESOURCE_IO;
-
-	res[1].start = IOP321_PCI_LOWER_MEM_PA;
-	res[1].end   = IOP321_PCI_UPPER_MEM_PA;
-	res[1].name  = "IQ31244 PCI Memory Space";
-	res[1].flags = IORESOURCE_MEM;
-
-	request_resource(&ioport_resource, &res[0]);
-	request_resource(&iomem_resource, &res[1]);
-
-	sys->mem_offset = IOP321_PCI_MEM_OFFSET;
-	sys->io_offset  = IOP321_PCI_IO_OFFSET;
-
-	sys->resource[0] = &res[0];
-	sys->resource[1] = &res[1];
-	sys->resource[2] = NULL;
-
-	return 1;
-}
-
-static void iq31244_preinit(void)
-{
-	iop321_init();
-}
-
-static struct hw_pci iq31244_pci __initdata = {
-	.swizzle	= pci_std_swizzle,
-	.nr_controllers = 1,
-	.setup		= iq31244_setup,
-	.scan		= iop321_scan_bus,
-	.preinit	= iq31244_preinit,
-	.map_irq	= iq31244_map_irq
-};
-
-static int __init iq31244_pci_init(void)
-{
-	if (machine_is_iq31244())
-		pci_common_init(&iq31244_pci);
-	return 0;
-}
-
-subsys_initcall(iq31244_pci_init);
-
-
-
-
diff --git a/arch/arm/mach-iop3xx/iq80321-mm.c b/arch/arm/mach-iop3xx/iq80321-mm.c
deleted file mode 100644
index d9cac5e1fc3d..000000000000
--- a/arch/arm/mach-iop3xx/iq80321-mm.c
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * linux/arch/arm/mach-iop3xx/mm.c
- *
- * Low level memory initialization for iq80321 platform
- *
- * Author: Rory Bolt <rorybolt@pacbell.net>
- * Copyright (C) 2002 Rory Bolt
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-
-#include <asm/io.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-
-#include <asm/mach/map.h>
-
-
-/*
- * IQ80321 specific IO mappings
- *
- * We use RedBoot's setup for the onboard devices.
- */
-static struct map_desc iq80321_io_desc[] __initdata = {
- 	{	/* on-board devices */
-		.virtual	= IQ80321_UART,
-		.pfn		= __phys_to_pfn(IQ80321_UART),
-		.length		= 0x00100000,
-		.type		= MT_DEVICE
-	}
-};
-
-void __init iq80321_map_io(void)
-{
-	iop321_map_io();
-
-	iotable_init(iq80321_io_desc, ARRAY_SIZE(iq80321_io_desc));
-}
diff --git a/arch/arm/mach-iop3xx/iq80321-pci.c b/arch/arm/mach-iop3xx/iq80321-pci.c
deleted file mode 100644
index d9758d3f6e7f..000000000000
--- a/arch/arm/mach-iop3xx/iq80321-pci.c
+++ /dev/null
@@ -1,123 +0,0 @@
-/*
- * arch/arm/mach-iop3xx/iq80321-pci.c
- *
- * PCI support for the Intel IQ80321 reference board
- *
- * Author: Rory Bolt <rorybolt@pacbell.net>
- * Copyright (C) 2002 Rory Bolt
- * Copyright (C) 2004 Intel Corp.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/string.h>
-#include <linux/slab.h>
-
-#include <asm/hardware.h>
-#include <asm/irq.h>
-#include <asm/mach/pci.h>
-#include <asm/mach-types.h>
-
-/*
- * The following macro is used to lookup irqs in a standard table
- * format for those systems that do not already have PCI
- * interrupts properly routed.  We assume 1 <= pin <= 4
- */
-#define PCI_IRQ_TABLE_LOOKUP(minid,maxid)	\
-({ int _ctl_ = -1;				\
-   unsigned int _idsel = idsel - minid;		\
-   if (_idsel <= maxid)				\
-      _ctl_ = pci_irq_table[_idsel][pin-1];	\
-   _ctl_; })
-
-#define INTA	IRQ_IQ80321_INTA
-#define INTB	IRQ_IQ80321_INTB
-#define INTC	IRQ_IQ80321_INTC
-#define INTD	IRQ_IQ80321_INTD
-
-#define INTE	IRQ_IQ80321_I82544
-
-static inline int __init
-iq80321_map_irq(struct pci_dev *dev, u8 idsel, u8 pin)
-{
-	static int pci_irq_table[][4] = {
-		/*
-		 * PCI IDSEL/INTPIN->INTLINE
-		 * A       B       C       D
-		 */
-		{INTE, INTE, INTE, INTE}, /* Gig-E */
-		{-1, -1, -1, -1}, 	  /* Unused */
-		{INTC, INTD, INTA, INTB}, /* PCI-X Slot */
-		{-1, -1, -1, -1},
-	};
-
-	BUG_ON(pin < 1 || pin > 4);
-
-//	return PCI_IRQ_TABLE_LOOKUP(4, 7);
-	return pci_irq_table[idsel%4][pin-1];
-}
-
-static int iq80321_setup(int nr, struct pci_sys_data *sys)
-{
-	struct resource *res;
-
-	if(nr != 0)
-		return 0;
-
-	res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL);
-	if (!res)
-		panic("PCI: unable to alloc resources");
-
-	res[0].start = IOP321_PCI_LOWER_IO_VA;
-	res[0].end   = IOP321_PCI_UPPER_IO_VA;
-	res[0].name  = "IQ80321 PCI I/O Space";
-	res[0].flags = IORESOURCE_IO;
-
-	res[1].start = IOP321_PCI_LOWER_MEM_PA;
-	res[1].end   = IOP321_PCI_UPPER_MEM_PA;
-	res[1].name  = "IQ80321 PCI Memory Space";
-	res[1].flags = IORESOURCE_MEM;
-
-	request_resource(&ioport_resource, &res[0]);
-	request_resource(&iomem_resource, &res[1]);
-
-	sys->mem_offset = IOP321_PCI_MEM_OFFSET;
-	sys->io_offset  = IOP321_PCI_IO_OFFSET;
-
-	sys->resource[0] = &res[0];
-	sys->resource[1] = &res[1];
-	sys->resource[2] = NULL;
-
-	return 1;
-}
-
-static void iq80321_preinit(void)
-{
-	iop321_init();
-}
-
-static struct hw_pci iq80321_pci __initdata = {
-	.swizzle	= pci_std_swizzle,
-	.nr_controllers = 1,
-	.setup		= iq80321_setup,
-	.scan		= iop321_scan_bus,
-	.preinit	= iq80321_preinit,
-	.map_irq	= iq80321_map_irq
-};
-
-static int __init iq80321_pci_init(void)
-{
-	if (machine_is_iq80321())
-		pci_common_init(&iq80321_pci);
-	return 0;
-}
-
-subsys_initcall(iq80321_pci_init);
-
-
-
-
diff --git a/arch/arm/mach-iop3xx/iq80331-mm.c b/arch/arm/mach-iop3xx/iq80331-mm.c
deleted file mode 100644
index 129eb49b0670..000000000000
--- a/arch/arm/mach-iop3xx/iq80331-mm.c
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * linux/arch/arm/mach-iop3xx/mm.c
- *
- * Low level memory initialization for iq80331 platform
- *
- * Author: Dave Jiang <dave.jiang@intel.com>
- * Copyright (C) 2003 Intel Corp.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-
-#include <asm/io.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-
-#include <asm/mach/map.h>
-
-
-/*
- * IQ80331 specific IO mappings
- *
- * We use RedBoot's setup for the onboard devices.
- */
-
-void __init iq80331_map_io(void)
-{
-	iop331_map_io();
-}
diff --git a/arch/arm/mach-iop3xx/iq80331-pci.c b/arch/arm/mach-iop3xx/iq80331-pci.c
deleted file mode 100644
index 40d861002492..000000000000
--- a/arch/arm/mach-iop3xx/iq80331-pci.c
+++ /dev/null
@@ -1,119 +0,0 @@
-/*
- * arch/arm/mach-iop3xx/iq80331-pci.c
- *
- * PCI support for the Intel IQ80331 reference board
- *
- * Author: Dave Jiang <dave.jiang@intel.com>
- * Copyright (C) 2003, 2004 Intel Corp.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/string.h>
-#include <linux/slab.h>
-
-#include <asm/hardware.h>
-#include <asm/irq.h>
-#include <asm/mach/pci.h>
-#include <asm/mach-types.h>
-
-/*
- * The following macro is used to lookup irqs in a standard table
- * format for those systems that do not already have PCI
- * interrupts properly routed.  We assume 1 <= pin <= 4
- */
-#define PCI_IRQ_TABLE_LOOKUP(minid,maxid)	\
-({ int _ctl_ = -1;				\
-   unsigned int _idsel = idsel - minid;		\
-   if (_idsel <= maxid)				\
-      _ctl_ = pci_irq_table[_idsel][pin-1];	\
-   _ctl_; })
-
-#define INTA	IRQ_IQ80331_INTA
-#define INTB	IRQ_IQ80331_INTB
-#define INTC	IRQ_IQ80331_INTC
-#define INTD	IRQ_IQ80331_INTD
-
-//#define INTE	IRQ_IQ80331_I82544
-
-static inline int __init
-iq80331_map_irq(struct pci_dev *dev, u8 idsel, u8 pin)
-{
-	static int pci_irq_table[][4] = {
-		/*
-		 * PCI IDSEL/INTPIN->INTLINE
-		 * A       B       C       D
-		 */
-		{INTB, INTC, INTD, INTA}, /* PCI-X Slot */
-		{INTC, INTC, INTC, INTC}, /* GigE  */
-	};
-
-	BUG_ON(pin < 1 || pin > 4);
-
-	return PCI_IRQ_TABLE_LOOKUP(1, 7);
-}
-
-static int iq80331_setup(int nr, struct pci_sys_data *sys)
-{
-	struct resource *res;
-
-	if(nr != 0)
-		return 0;
-
-	res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL);
-	if (!res)
-		panic("PCI: unable to alloc resources");
-
-	res[0].start = IOP331_PCI_LOWER_IO_VA;
-	res[0].end   = IOP331_PCI_UPPER_IO_VA;
-	res[0].name  = "IQ80331 PCI I/O Space";
-	res[0].flags = IORESOURCE_IO;
-
-	res[1].start = IOP331_PCI_LOWER_MEM_PA;
-	res[1].end   = IOP331_PCI_UPPER_MEM_PA;
-	res[1].name  = "IQ80331 PCI Memory Space";
-	res[1].flags = IORESOURCE_MEM;
-
-	request_resource(&ioport_resource, &res[0]);
-	request_resource(&iomem_resource, &res[1]);
-
-	sys->mem_offset = IOP331_PCI_MEM_OFFSET;
-	sys->io_offset  = IOP331_PCI_IO_OFFSET;
-
-	sys->resource[0] = &res[0];
-	sys->resource[1] = &res[1];
-	sys->resource[2] = NULL;
-
-	return 1;
-}
-
-static void iq80331_preinit(void)
-{
-	iop331_init();
-}
-
-static struct hw_pci iq80331_pci __initdata = {
-	.swizzle	= pci_std_swizzle,
-	.nr_controllers = 1,
-	.setup		= iq80331_setup,
-	.scan		= iop331_scan_bus,
-	.preinit	= iq80331_preinit,
-	.map_irq	= iq80331_map_irq
-};
-
-static int __init iq80331_pci_init(void)
-{
-	if (machine_is_iq80331())
-		pci_common_init(&iq80331_pci);
-	return 0;
-}
-
-subsys_initcall(iq80331_pci_init);
-
-
-
-
diff --git a/arch/arm/mach-iop3xx/iq80332-mm.c b/arch/arm/mach-iop3xx/iq80332-mm.c
deleted file mode 100644
index 2feaf7591f53..000000000000
--- a/arch/arm/mach-iop3xx/iq80332-mm.c
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * linux/arch/arm/mach-iop3xx/mm.c
- *
- * Low level memory initialization for iq80332 platform
- *
- * Author: Dave Jiang <dave.jiang@intel.com>
- * Copyright (C) 2004 Intel Corp.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-
-#include <asm/io.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-
-#include <asm/mach/map.h>
-
-
-/*
- * IQ80332 specific IO mappings
- *
- * We use RedBoot's setup for the onboard devices.
- */
-
-void __init iq80332_map_io(void)
-{
-	iop331_map_io();
-}
diff --git a/arch/arm/mach-iop3xx/iq80332-pci.c b/arch/arm/mach-iop3xx/iq80332-pci.c
deleted file mode 100644
index afc0676318e4..000000000000
--- a/arch/arm/mach-iop3xx/iq80332-pci.c
+++ /dev/null
@@ -1,125 +0,0 @@
-/*
- * arch/arm/mach-iop3xx/iq80332-pci.c
- *
- * PCI support for the Intel IQ80332 reference board
- *
- * Author: Dave Jiang <dave.jiang@intel.com>
- * Copyright (C) 2004 Intel Corp.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/string.h>
-#include <linux/slab.h>
-
-#include <asm/hardware.h>
-#include <asm/irq.h>
-#include <asm/mach/pci.h>
-#include <asm/mach-types.h>
-
-/*
- * The following macro is used to lookup irqs in a standard table
- * format for those systems that do not already have PCI
- * interrupts properly routed.  We assume 1 <= pin <= 4
- */
-#define PCI_IRQ_TABLE_LOOKUP(minid,maxid)	\
-({ int _ctl_ = -1;				\
-   unsigned int _idsel = idsel - minid;		\
-   if (_idsel <= maxid)				\
-      _ctl_ = pci_irq_table[_idsel][pin-1];	\
-   _ctl_; })
-
-#define INTA	IRQ_IQ80332_INTA
-#define INTB	IRQ_IQ80332_INTB
-#define INTC	IRQ_IQ80332_INTC
-#define INTD	IRQ_IQ80332_INTD
-
-//#define INTE	IRQ_IQ80332_I82544
-
-static inline int __init
-iq80332_map_irq(struct pci_dev *dev, u8 idsel, u8 pin)
-{
-	static int pci_irq_table[][8] = {
-		/*
-		 * PCI IDSEL/INTPIN->INTLINE
-		 * A       B       C       D
-		 */
-		{-1,   -1,   -1,   -1},
-		{-1,   -1,   -1,   -1},
-		{-1,   -1,   -1,   -1},
-		{INTA, INTB, INTC, INTD}, /* PCI-X Slot */
-		{-1,   -1,   -1,   -1},
-		{INTC, INTC, INTC, INTC}, /* GigE  */
-		{-1,   -1,   -1,   -1},
-		{-1,   -1,   -1,   -1},
-	};
-
-	BUG_ON(pin < 1 || pin > 4);
-
-	return PCI_IRQ_TABLE_LOOKUP(1, 7);
-}
-
-static int iq80332_setup(int nr, struct pci_sys_data *sys)
-{
-	struct resource *res;
-
-	if(nr != 0)
-		return 0;
-
-	res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL);
-	if (!res)
-		panic("PCI: unable to alloc resources");
-
-	res[0].start = IOP331_PCI_LOWER_IO_VA;
-	res[0].end   = IOP331_PCI_UPPER_IO_VA;
-	res[0].name  = "IQ80332 PCI I/O Space";
-	res[0].flags = IORESOURCE_IO;
-
-	res[1].start = IOP331_PCI_LOWER_MEM_PA;
-	res[1].end   = IOP331_PCI_UPPER_MEM_PA;
-	res[1].name  = "IQ80332 PCI Memory Space";
-	res[1].flags = IORESOURCE_MEM;
-
-	request_resource(&ioport_resource, &res[0]);
-	request_resource(&iomem_resource, &res[1]);
-
-	sys->mem_offset = IOP331_PCI_MEM_OFFSET;
-	sys->io_offset  = IOP331_PCI_IO_OFFSET;
-
-	sys->resource[0] = &res[0];
-	sys->resource[1] = &res[1];
-	sys->resource[2] = NULL;
-
-	return 1;
-}
-
-static void iq80332_preinit(void)
-{
-	iop331_init();
-}
-
-static struct hw_pci iq80332_pci __initdata = {
-	.swizzle	= pci_std_swizzle,
-	.nr_controllers = 1,
-	.setup		= iq80332_setup,
-	.scan		= iop331_scan_bus,
-	.preinit	= iq80332_preinit,
-	.map_irq	= iq80332_map_irq
-};
-
-static int __init iq80332_pci_init(void)
-{
-	if (machine_is_iq80332())
-		pci_common_init(&iq80332_pci);
-	return 0;
-}
-
-subsys_initcall(iq80332_pci_init);
-
-
-
-
diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c
index 7c25dbd5a181..35dd8b3824b0 100644
--- a/arch/arm/mach-ixp4xx/common.c
+++ b/arch/arm/mach-ixp4xx/common.c
@@ -26,6 +26,7 @@
 #include <linux/bitops.h>
 #include <linux/time.h>
 #include <linux/timex.h>
+#include <linux/clocksource.h>
 
 #include <asm/hardware.h>
 #include <asm/uaccess.h>
@@ -255,16 +256,6 @@ static unsigned volatile last_jiffy_time;
 
 #define CLOCK_TICKS_PER_USEC	((CLOCK_TICK_RATE + USEC_PER_SEC/2) / USEC_PER_SEC)
 
-/* IRQs are disabled before entering here from do_gettimeofday() */
-static unsigned long ixp4xx_gettimeoffset(void)
-{
-	u32 elapsed;
-
-	elapsed = *IXP4XX_OSTS - last_jiffy_time;
-
-	return elapsed / CLOCK_TICKS_PER_USEC;
-}
-
 static irqreturn_t ixp4xx_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 {
 	write_seqlock(&xtime_lock);
@@ -309,7 +300,6 @@ static void __init ixp4xx_timer_init(void)
 
 struct sys_timer ixp4xx_timer = {
 	.init		= ixp4xx_timer_init,
-	.offset		= ixp4xx_gettimeoffset,
 };
 
 static struct resource ixp46x_i2c_resources[] = {
@@ -365,3 +355,29 @@ void __init ixp4xx_sys_init(void)
 			ixp4xx_exp_bus_size >> 20);
 }
 
+cycle_t ixp4xx_get_cycles(void)
+{
+	return *IXP4XX_OSTS;
+}
+
+static struct clocksource clocksource_ixp4xx = {
+	.name 		= "OSTS",
+	.rating		= 200,
+	.read		= ixp4xx_get_cycles,
+	.mask		= CLOCKSOURCE_MASK(32),
+	.shift 		= 20,
+	.is_continuous 	= 1,
+};
+
+unsigned long ixp4xx_timer_freq = FREQ;
+static int __init ixp4xx_clocksource_init(void)
+{
+	clocksource_ixp4xx.mult =
+		clocksource_hz2mult(ixp4xx_timer_freq,
+				    clocksource_ixp4xx.shift);
+	clocksource_register(&clocksource_ixp4xx);
+
+	return 0;
+}
+
+device_initcall(ixp4xx_clocksource_init);
diff --git a/arch/arm/mach-ixp4xx/nslu2-setup.c b/arch/arm/mach-ixp4xx/nslu2-setup.c
index 749a337494d3..162c266e5f8f 100644
--- a/arch/arm/mach-ixp4xx/nslu2-setup.c
+++ b/arch/arm/mach-ixp4xx/nslu2-setup.c
@@ -159,6 +159,8 @@ static void nslu2_power_off(void)
 
 static void __init nslu2_init(void)
 {
+	ixp4xx_timer_freq = NSLU2_FREQ;
+
 	ixp4xx_sys_init();
 
 	nslu2_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c
index f1958e882e86..638490e62d5f 100644
--- a/arch/arm/mach-omap1/clock.c
+++ b/arch/arm/mach-omap1/clock.c
@@ -20,6 +20,7 @@
 #include <linux/clk.h>
 
 #include <asm/io.h>
+#include <asm/mach-types.h>
 
 #include <asm/arch/cpu.h>
 #include <asm/arch/usb.h>
@@ -586,77 +587,53 @@ static int omap1_clk_set_rate(struct clk *clk, unsigned long rate)
  *-------------------------------------------------------------------------*/
 
 #ifdef CONFIG_OMAP_RESET_CLOCKS
-/*
- * Resets some clocks that may be left on from bootloader,
- * but leaves serial clocks on. See also omap_late_clk_reset().
- */
-static inline void omap1_early_clk_reset(void)
-{
-	//omap_writel(0x3 << 29, MOD_CONF_CTRL_0);
-}
 
-static int __init omap1_late_clk_reset(void)
+static void __init omap1_clk_disable_unused(struct clk *clk)
 {
-	/* Turn off all unused clocks */
-	struct clk *p;
 	__u32 regval32;
 
-	/* USB_REQ_EN will be disabled later if necessary (usb_dc_ck) */
-	regval32 = omap_readw(SOFT_REQ_REG) & (1 << 4);
-	omap_writew(regval32, SOFT_REQ_REG);
-	omap_writew(0, SOFT_REQ_REG2);
-
-	list_for_each_entry(p, &clocks, node) {
-		if (p->usecount > 0 || (p->flags & ALWAYS_ENABLED) ||
-			p->enable_reg == 0)
-			continue;
-
-		/* Clocks in the DSP domain need api_ck. Just assume bootloader
-		 * has not enabled any DSP clocks */
-		if ((u32)p->enable_reg == DSP_IDLECT2) {
-			printk(KERN_INFO "Skipping reset check for DSP domain "
-			       "clock \"%s\"\n", p->name);
-			continue;
-		}
+	/* Clocks in the DSP domain need api_ck. Just assume bootloader
+	 * has not enabled any DSP clocks */
+	if ((u32)clk->enable_reg == DSP_IDLECT2) {
+		printk(KERN_INFO "Skipping reset check for DSP domain "
+		       "clock \"%s\"\n", clk->name);
+		return;
+	}
 
-		/* Is the clock already disabled? */
-		if (p->flags & ENABLE_REG_32BIT) {
-			if (p->flags & VIRTUAL_IO_ADDRESS)
-				regval32 = __raw_readl(p->enable_reg);
-			else
-				regval32 = omap_readl(p->enable_reg);
-		} else {
-			if (p->flags & VIRTUAL_IO_ADDRESS)
-				regval32 = __raw_readw(p->enable_reg);
+	/* Is the clock already disabled? */
+	if (clk->flags & ENABLE_REG_32BIT) {
+		if (clk->flags & VIRTUAL_IO_ADDRESS)
+			regval32 = __raw_readl(clk->enable_reg);
 			else
-				regval32 = omap_readw(p->enable_reg);
-		}
-
-		if ((regval32 & (1 << p->enable_bit)) == 0)
-			continue;
+				regval32 = omap_readl(clk->enable_reg);
+	} else {
+		if (clk->flags & VIRTUAL_IO_ADDRESS)
+			regval32 = __raw_readw(clk->enable_reg);
+		else
+			regval32 = omap_readw(clk->enable_reg);
+	}
 
-		/* FIXME: This clock seems to be necessary but no-one
-		 * has asked for its activation. */
-		if (p == &tc2_ck         // FIX: pm.c (SRAM), CCP, Camera
-		    || p == &ck_dpll1out.clk // FIX: SoSSI, SSR
-		    || p == &arm_gpio_ck // FIX: GPIO code for 1510
-		    ) {
-			printk(KERN_INFO "FIXME: Clock \"%s\" seems unused\n",
-			       p->name);
-			continue;
-		}
+	if ((regval32 & (1 << clk->enable_bit)) == 0)
+		return;
 
-		printk(KERN_INFO "Disabling unused clock \"%s\"... ", p->name);
-		p->disable(p);
-		printk(" done\n");
+	/* FIXME: This clock seems to be necessary but no-one
+	 * has asked for its activation. */
+	if (clk == &tc2_ck		// FIX: pm.c (SRAM), CCP, Camera
+	    || clk == &ck_dpll1out.clk	// FIX: SoSSI, SSR
+	    || clk == &arm_gpio_ck	// FIX: GPIO code for 1510
+		) {
+		printk(KERN_INFO "FIXME: Clock \"%s\" seems unused\n",
+		       clk->name);
+		return;
 	}
 
-	return 0;
+	printk(KERN_INFO "Disabling unused clock \"%s\"... ", clk->name);
+	clk->disable(clk);
+	printk(" done\n");
 }
-late_initcall(omap1_late_clk_reset);
 
 #else
-#define omap1_early_clk_reset()	{}
+#define omap1_clk_disable_unused	NULL
 #endif
 
 static struct clk_functions omap1_clk_functions = {
@@ -664,6 +641,7 @@ static struct clk_functions omap1_clk_functions = {
 	.clk_disable		= omap1_clk_disable,
 	.clk_round_rate		= omap1_clk_round_rate,
 	.clk_set_rate		= omap1_clk_set_rate,
+	.clk_disable_unused	= omap1_clk_disable_unused,
 };
 
 int __init omap1_clk_init(void)
@@ -671,8 +649,13 @@ int __init omap1_clk_init(void)
 	struct clk ** clkp;
 	const struct omap_clock_config *info;
 	int crystal_type = 0; /* Default 12 MHz */
+	u32 reg;
+
+	/* USB_REQ_EN will be disabled later if necessary (usb_dc_ck) */
+	reg = omap_readw(SOFT_REQ_REG) & (1 << 4);
+	omap_writew(reg, SOFT_REQ_REG);
+	omap_writew(0, SOFT_REQ_REG2);
 
-	omap1_early_clk_reset();
 	clk_init(&omap1_clk_functions);
 
 	/* By default all idlect1 clocks are allowed to idle */
@@ -772,6 +755,12 @@ int __init omap1_clk_init(void)
 	omap_writew(omap_readw(OMAP730_PCC_UPLD_CTRL) & ~0x1, OMAP730_PCC_UPLD_CTRL);
 #endif
 
+	/* Amstrad Delta wants BCLK high when inactive */
+	if (machine_is_ams_delta())
+		omap_writel(omap_readl(ULPD_CLOCK_CTRL) |
+				(1 << SDW_MCLK_INV_BIT),
+				ULPD_CLOCK_CTRL);
+
 	/* Turn off DSP and ARM_TIMXO. Make sure ARM_INTHCK is not divided */
 	/* (on 730, bit 13 must not be cleared) */
 	if (cpu_is_omap730())
diff --git a/arch/arm/mach-omap1/clock.h b/arch/arm/mach-omap1/clock.h
index b7c68819c4e7..f7df00205c4a 100644
--- a/arch/arm/mach-omap1/clock.h
+++ b/arch/arm/mach-omap1/clock.h
@@ -89,6 +89,7 @@ struct arm_idlect1_clk {
 #define EN_DSPTIMCK	5
 
 /* Various register defines for clock controls scattered around OMAP chip */
+#define SDW_MCLK_INV_BIT	2	/* In ULPD_CLKC_CTRL */
 #define USB_MCLK_EN_BIT		4	/* In ULPD_CLKC_CTRL */
 #define USB_HOST_HHC_UHOST_EN	9	/* In MOD_CONF_CTRL_0 */
 #define SWD_ULPD_PLL_CLK_REQ	1	/* In SWD_CLK_DIV_CTRL_SEL */
@@ -741,6 +742,18 @@ static struct clk i2c_fck = {
 	.disable	= &omap1_clk_disable_generic,
 };
 
+static struct clk i2c_ick = {
+	.name		= "i2c_ick",
+	.id		= 1,
+	.flags		= CLOCK_IN_OMAP16XX |
+			  VIRTUAL_CLOCK | CLOCK_NO_IDLE_PARENT |
+			  ALWAYS_ENABLED,
+	.parent		= &armper_ck.clk,
+	.recalc		= &followparent_recalc,
+	.enable		= &omap1_clk_enable_generic,
+	.disable	= &omap1_clk_disable_generic,
+};
+
 static struct clk * onchip_clks[] = {
 	/* non-ULPD clocks */
 	&ck_ref,
@@ -790,6 +803,7 @@ static struct clk * onchip_clks[] = {
 	/* Virtual clocks */
 	&virtual_ck_mpu,
 	&i2c_fck,
+	&i2c_ick,
 };
 
 #endif
diff --git a/arch/arm/mach-omap1/mux.c b/arch/arm/mach-omap1/mux.c
index fa74ef7af15f..5432335bc493 100644
--- a/arch/arm/mach-omap1/mux.c
+++ b/arch/arm/mach-omap1/mux.c
@@ -199,6 +199,17 @@ MUX_CFG("N14_1610_UWIRE_CS0",	 8,    9,    1,	  1,  21,   0,	  1,	 1,  1)
 MUX_CFG("P15_1610_UWIRE_CS3",	 8,   12,    1,	  1,  22,   0,	  1,	 1,  1)
 MUX_CFG("N15_1610_UWIRE_CS1",	 7,   18,    2,	  1,  14,   0,	 NA,	 0,  1)
 
+/* OMAP-1610 SPI */
+MUX_CFG("U19_1610_SPIF_SCK",	 7,    21,   6,	  1,  15,   0,	  1,	 1,  1)
+MUX_CFG("U18_1610_SPIF_DIN",	 8,    0,    6,	  1,  18,   1,	  1,	 0,  1)
+MUX_CFG("P20_1610_SPIF_DIN",	 6,    27,   4,   1,   7,   1,    1,     0,  1)
+MUX_CFG("W21_1610_SPIF_DOUT",	 8,    3,    6,	  1,  19,   0,	  1,	 0,  1)
+MUX_CFG("R18_1610_SPIF_DOUT",	 7,    9,    3,	  1,  11,   0,	  1,	 0,  1)
+MUX_CFG("N14_1610_SPIF_CS0",	 8,    9,    6,	  1,  21,   0,	  1,	 1,  1)
+MUX_CFG("N15_1610_SPIF_CS1",	 7,    18,   6,	  1,  14,   0,	  1,	 1,  1)
+MUX_CFG("T19_1610_SPIF_CS2",	 7,    15,   4,	  1,  13,   0,	  1,	 1,  1)
+MUX_CFG("P15_1610_SPIF_CS3",	 8,    12,   3,	  1,  22,   0,	  1,	 1,  1)
+
 /* OMAP-1610 Flash */
 MUX_CFG("L3_1610_FLASH_CS2B_OE",10,    6,    1,	 NA,   0,   0,	 NA,	 0,  1)
 MUX_CFG("M8_1610_FLASH_CS2B_WE",10,    3,    1,	 NA,   0,   0,	 NA,	 0,  1)
diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c
index 7993b7bae2bd..2db6b732b084 100644
--- a/arch/arm/mach-omap2/board-apollon.c
+++ b/arch/arm/mach-omap2/board-apollon.c
@@ -166,8 +166,8 @@ static struct omap_uart_config apollon_uart_config __initdata = {
 
 static struct omap_mmc_config apollon_mmc_config __initdata = {
 	.mmc [0] = {
-		.enabled 	= 0,
-		.wire4		= 0,
+		.enabled 	= 1,
+		.wire4		= 1,
 		.wp_pin		= -1,
 		.power_pin	= -1,
 		.switch_pin	= -1,
@@ -257,6 +257,9 @@ static void __init omap_apollon_init(void)
 	/* REVISIT: where's the correct place */
 	omap_cfg_reg(W19_24XX_SYS_NIRQ);
 
+	/* Use Interal loop-back in MMC/SDIO Module Input Clock selection */
+	CONTROL_DEVCONF |= (1 << 24);
+
 	/*
  	 * Make sure the serial ports are muxed on at this point.
 	 * You have to mux them off in device drivers later on
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index d1b648a4efbf..0de201c3d50b 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -32,10 +32,14 @@
 #include "memory.h"
 #include "clock.h"
 
+#undef DEBUG
+
 //#define DOWN_VARIABLE_DPLL 1			/* Experimental */
 
 static struct prcm_config *curr_prcm_set;
 static u32 curr_perf_level = PRCM_FULL_SPEED;
+static struct clk *vclk;
+static struct clk *sclk;
 
 /*-------------------------------------------------------------------------
  * Omap2 specific clock functions
@@ -79,6 +83,14 @@ static void omap2_propagate_rate(struct clk * clk)
 	propagate_rate(clk);
 }
 
+static void omap2_set_osc_ck(int enable)
+{
+	if (enable)
+		PRCM_CLKSRC_CTRL &= ~(0x3 << 3);
+	else
+		PRCM_CLKSRC_CTRL |= 0x3 << 3;
+}
+
 /* Enable an APLL if off */
 static void omap2_clk_fixed_enable(struct clk *clk)
 {
@@ -101,12 +113,54 @@ static void omap2_clk_fixed_enable(struct clk *clk)
 	else if (clk == &apll54_ck)
 		cval = (1 << 6);
 
-	while (!CM_IDLEST_CKGEN & cval) {		/* Wait for lock */
+	while (!(CM_IDLEST_CKGEN & cval)) {		/* Wait for lock */
 		++i;
 		udelay(1);
-		if (i == 100000)
+		if (i == 100000) {
+			printk(KERN_ERR "Clock %s didn't lock\n", clk->name);
+			break;
+		}
+	}
+}
+
+static void omap2_clk_wait_ready(struct clk *clk)
+{
+	unsigned long reg, other_reg, st_reg;
+	u32 bit;
+	int i;
+
+	reg = (unsigned long) clk->enable_reg;
+	if (reg == (unsigned long) &CM_FCLKEN1_CORE ||
+	    reg == (unsigned long) &CM_FCLKEN2_CORE)
+		other_reg = (reg & ~0xf0) | 0x10;
+	else if (reg == (unsigned long) &CM_ICLKEN1_CORE ||
+		 reg == (unsigned long) &CM_ICLKEN2_CORE)
+		other_reg = (reg & ~0xf0) | 0x00;
+	else
+		return;
+
+	/* No check for DSS or cam clocks */
+	if ((reg & 0x0f) == 0) {
+		if (clk->enable_bit <= 1 || clk->enable_bit == 31)
+			return;
+	}
+
+	/* Check if both functional and interface clocks
+	 * are running. */
+	bit = 1 << clk->enable_bit;
+	if (!(__raw_readl(other_reg) & bit))
+		return;
+	st_reg = (other_reg & ~0xf0) | 0x20;
+	i = 0;
+	while (!(__raw_readl(st_reg) & bit)) {
+		i++;
+		if (i == 100000) {
+			printk(KERN_ERR "Timeout enabling clock %s\n", clk->name);
 			break;
+		}
 	}
+	if (i)
+		pr_debug("Clock %s stable after %d loops\n", clk->name, i);
 }
 
 /* Enables clock without considering parent dependencies or use count
@@ -119,6 +173,11 @@ static int _omap2_clk_enable(struct clk * clk)
 	if (clk->flags & ALWAYS_ENABLED)
 		return 0;
 
+	if (unlikely(clk == &osc_ck)) {
+		omap2_set_osc_ck(1);
+		return 0;
+	}
+
 	if (unlikely(clk->enable_reg == 0)) {
 		printk(KERN_ERR "clock.c: Enable for %s without enable code\n",
 		       clk->name);
@@ -133,6 +192,9 @@ static int _omap2_clk_enable(struct clk * clk)
 	regval32 = __raw_readl(clk->enable_reg);
 	regval32 |= (1 << clk->enable_bit);
 	__raw_writel(regval32, clk->enable_reg);
+	wmb();
+
+	omap2_clk_wait_ready(clk);
 
 	return 0;
 }
@@ -155,6 +217,11 @@ static void _omap2_clk_disable(struct clk *clk)
 {
 	u32 regval32;
 
+	if (unlikely(clk == &osc_ck)) {
+		omap2_set_osc_ck(0);
+		return;
+	}
+
 	if (clk->enable_reg == 0)
 		return;
 
@@ -166,6 +233,7 @@ static void _omap2_clk_disable(struct clk *clk)
 	regval32 = __raw_readl(clk->enable_reg);
 	regval32 &= ~(1 << clk->enable_bit);
 	__raw_writel(regval32, clk->enable_reg);
+	wmb();
 }
 
 static int omap2_clk_enable(struct clk *clk)
@@ -695,12 +763,14 @@ static int omap2_clk_set_rate(struct clk *clk, unsigned long rate)
 		reg_val = __raw_readl(reg);
 		reg_val &= ~(field_mask << div_off);
 		reg_val |= (field_val << div_off);
-
 		__raw_writel(reg_val, reg);
+		wmb();
 		clk->rate = clk->parent->rate / field_val;
 
-		if (clk->flags & DELAYED_APP)
+		if (clk->flags & DELAYED_APP) {
 			__raw_writel(0x1, (void __iomem *)&PRCM_CLKCFG_CTRL);
+			wmb();
+		}
 		ret = 0;
 	} else if (clk->set_rate != 0)
 		ret = clk->set_rate(clk, rate);
@@ -836,10 +906,12 @@ static int omap2_clk_set_parent(struct clk *clk, struct clk *new_parent)
 		reg_val = __raw_readl(reg) & ~(field_mask << src_off);
 		reg_val |= (field_val << src_off);
 		__raw_writel(reg_val, reg);
+		wmb();
 
-		if (clk->flags & DELAYED_APP)
+		if (clk->flags & DELAYED_APP) {
 			__raw_writel(0x1, (void __iomem *)&PRCM_CLKCFG_CTRL);
-
+			wmb();
+		}
 		if (clk->usecount > 0)
 			_omap2_clk_enable(clk);
 
@@ -953,12 +1025,29 @@ static int omap2_select_table_rate(struct clk * clk, unsigned long rate)
  * Omap2 clock reset and init functions
  *-------------------------------------------------------------------------*/
 
+#ifdef CONFIG_OMAP_RESET_CLOCKS
+static void __init omap2_clk_disable_unused(struct clk *clk)
+{
+	u32 regval32;
+
+	regval32 = __raw_readl(clk->enable_reg);
+	if ((regval32 & (1 << clk->enable_bit)) == 0)
+		return;
+
+	printk(KERN_INFO "Disabling unused clock \"%s\"\n", clk->name);
+	_omap2_clk_disable(clk);
+}
+#else
+#define omap2_clk_disable_unused	NULL
+#endif
+
 static struct clk_functions omap2_clk_functions = {
 	.clk_enable		= omap2_clk_enable,
 	.clk_disable		= omap2_clk_disable,
 	.clk_round_rate		= omap2_clk_round_rate,
 	.clk_set_rate		= omap2_clk_set_rate,
 	.clk_set_parent		= omap2_clk_set_parent,
+	.clk_disable_unused	= omap2_clk_disable_unused,
 };
 
 static void __init omap2_get_crystal_rate(struct clk *osc, struct clk *sys)
@@ -984,27 +1073,19 @@ static void __init omap2_get_crystal_rate(struct clk *osc, struct clk *sys)
 	sys->rate = sclk;
 }
 
-#ifdef CONFIG_OMAP_RESET_CLOCKS
-static void __init omap2_disable_unused_clocks(void)
+/*
+ * Set clocks for bypass mode for reboot to work.
+ */
+void omap2_clk_prepare_for_reboot(void)
 {
-	struct clk *ck;
-	u32 regval32;
+	u32 rate;
 
-	list_for_each_entry(ck, &clocks, node) {
-		if (ck->usecount > 0 || (ck->flags & ALWAYS_ENABLED) ||
-			ck->enable_reg == 0)
-			continue;
-
-		regval32 = __raw_readl(ck->enable_reg);
-		if ((regval32 & (1 << ck->enable_bit)) == 0)
-			continue;
+	if (vclk == NULL || sclk == NULL)
+		return;
 
-		printk(KERN_INFO "Disabling unused clock \"%s\"\n", ck->name);
-		_omap2_clk_disable(ck);
-	}
+	rate = clk_get_rate(sclk);
+	clk_set_rate(vclk, rate);
 }
-late_initcall(omap2_disable_unused_clocks);
-#endif
 
 /*
  * Switch the MPU rate if specified on cmdline.
@@ -1077,8 +1158,27 @@ int __init omap2_clk_init(void)
 	 */
 	clk_enable(&sync_32k_ick);
 	clk_enable(&omapctrl_ick);
+
+	/* Force the APLLs active during bootup to avoid disabling and
+	 * enabling them unnecessarily. */
+	clk_enable(&apll96_ck);
+	clk_enable(&apll54_ck);
+
 	if (cpu_is_omap2430())
 		clk_enable(&sdrc_ick);
 
+	/* Avoid sleeping sleeping during omap2_clk_prepare_for_reboot() */
+	vclk = clk_get(NULL, "virt_prcm_set");
+	sclk = clk_get(NULL, "sys_ck");
+
+	return 0;
+}
+
+static int __init omap2_disable_aplls(void)
+{
+	clk_disable(&apll96_ck);
+	clk_disable(&apll54_ck);
+
 	return 0;
 }
+late_initcall(omap2_disable_aplls);
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index 2781dfbc5164..8816f5a33a28 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -560,7 +560,7 @@ static struct clk osc_ck = {		/* (*12, *13, 19.2, *26, 38.4)MHz */
 	.name		= "osc_ck",
 	.rate		= 26000000,		/* fixed up in clock init */
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				RATE_FIXED | ALWAYS_ENABLED | RATE_PROPAGATES,
+				RATE_FIXED | RATE_PROPAGATES,
 };
 
 /* With out modem likely 12MHz, with modem likely 13MHz */
@@ -1368,7 +1368,8 @@ static struct clk mcbsp5_fck = {
 };
 
 static struct clk mcspi1_ick = {
-	.name		= "mcspi1_ick",
+	.name		= "mcspi_ick",
+	.id		= 1,
 	.parent		= &l4_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
@@ -1377,7 +1378,8 @@ static struct clk mcspi1_ick = {
 };
 
 static struct clk mcspi1_fck = {
-	.name		= "mcspi1_fck",
+	.name		= "mcspi_fck",
+	.id		= 1,
 	.parent		= &func_48m_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
@@ -1386,7 +1388,8 @@ static struct clk mcspi1_fck = {
 };
 
 static struct clk mcspi2_ick = {
-	.name		= "mcspi2_ick",
+	.name		= "mcspi_ick",
+	.id		= 2,
 	.parent		= &l4_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
@@ -1395,7 +1398,8 @@ static struct clk mcspi2_ick = {
 };
 
 static struct clk mcspi2_fck = {
-	.name		= "mcspi2_fck",
+	.name		= "mcspi_fck",
+	.id		= 2,
 	.parent		= &func_48m_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
@@ -1404,7 +1408,8 @@ static struct clk mcspi2_fck = {
 };
 
 static struct clk mcspi3_ick = {
-	.name		= "mcspi3_ick",
+	.name		= "mcspi_ick",
+	.id		= 3,
 	.parent		= &l4_ck,
 	.flags		= CLOCK_IN_OMAP243X,
 	.enable_reg	= (void __iomem *)&CM_ICLKEN2_CORE,
@@ -1413,7 +1418,8 @@ static struct clk mcspi3_ick = {
 };
 
 static struct clk mcspi3_fck = {
-	.name		= "mcspi3_fck",
+	.name		= "mcspi_fck",
+	.id		= 3,
 	.parent		= &func_48m_ck,
 	.flags		= CLOCK_IN_OMAP243X,
 	.enable_reg	= (void __iomem *)&CM_FCLKEN2_CORE,
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index c7a48f921fef..f4f04d87df32 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -13,6 +13,8 @@
 #include <linux/init.h>
 #include <linux/err.h>
 #include <linux/clk.h>
+#include <linux/ioport.h>
+#include <linux/spinlock.h>
 
 #include <asm/io.h>
 #include <asm/arch/gpmc.h>
@@ -41,6 +43,19 @@
 #define GPMC_CS0		0x60
 #define GPMC_CS_SIZE		0x30
 
+#define GPMC_CS_NUM		8
+#define GPMC_MEM_START		0x00000000
+#define GPMC_MEM_END		0x3FFFFFFF
+#define BOOT_ROM_SPACE		0x100000	/* 1MB */
+
+#define GPMC_CHUNK_SHIFT	24		/* 16 MB */
+#define GPMC_SECTION_SHIFT	28		/* 128 MB */
+
+static struct resource	gpmc_mem_root;
+static struct resource	gpmc_cs_mem[GPMC_CS_NUM];
+static spinlock_t	gpmc_mem_lock = SPIN_LOCK_UNLOCKED;
+static unsigned		gpmc_cs_map;
+
 static void __iomem *gpmc_base =
 	(void __iomem *) IO_ADDRESS(GPMC_BASE);
 static void __iomem *gpmc_cs_base =
@@ -187,9 +202,168 @@ int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t)
 	return 0;
 }
 
-unsigned long gpmc_cs_get_base_addr(int cs)
+static void gpmc_cs_enable_mem(int cs, u32 base, u32 size)
+{
+	u32 l;
+	u32 mask;
+
+	mask = (1 << GPMC_SECTION_SHIFT) - size;
+	l = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG7);
+	l &= ~0x3f;
+	l = (base >> GPMC_CHUNK_SHIFT) & 0x3f;
+	l &= ~(0x0f << 8);
+	l |= ((mask >> GPMC_CHUNK_SHIFT) & 0x0f) << 8;
+	l |= 1 << 6;		/* CSVALID */
+	gpmc_cs_write_reg(cs, GPMC_CS_CONFIG7, l);
+}
+
+static void gpmc_cs_disable_mem(int cs)
+{
+	u32 l;
+
+	l = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG7);
+	l &= ~(1 << 6);		/* CSVALID */
+	gpmc_cs_write_reg(cs, GPMC_CS_CONFIG7, l);
+}
+
+static void gpmc_cs_get_memconf(int cs, u32 *base, u32 *size)
+{
+	u32 l;
+	u32 mask;
+
+	l = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG7);
+	*base = (l & 0x3f) << GPMC_CHUNK_SHIFT;
+	mask = (l >> 8) & 0x0f;
+	*size = (1 << GPMC_SECTION_SHIFT) - (mask << GPMC_CHUNK_SHIFT);
+}
+
+static int gpmc_cs_mem_enabled(int cs)
+{
+	u32 l;
+
+	l = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG7);
+	return l & (1 << 6);
+}
+
+static void gpmc_cs_set_reserved(int cs, int reserved)
 {
-	return (gpmc_cs_read_reg(cs, GPMC_CS_CONFIG7) & 0x1f) << 24;
+	gpmc_cs_map &= ~(1 << cs);
+	gpmc_cs_map |= (reserved ? 1 : 0) << cs;
+}
+
+static int gpmc_cs_reserved(int cs)
+{
+	return gpmc_cs_map & (1 << cs);
+}
+
+static unsigned long gpmc_mem_align(unsigned long size)
+{
+	int order;
+
+	size = (size - 1) >> (GPMC_CHUNK_SHIFT - 1);
+	order = GPMC_CHUNK_SHIFT - 1;
+	do {
+		size >>= 1;
+		order++;
+	} while (size);
+	size = 1 << order;
+	return size;
+}
+
+static int gpmc_cs_insert_mem(int cs, unsigned long base, unsigned long size)
+{
+	struct resource	*res = &gpmc_cs_mem[cs];
+	int r;
+
+	size = gpmc_mem_align(size);
+	spin_lock(&gpmc_mem_lock);
+	res->start = base;
+	res->end = base + size - 1;
+	r = request_resource(&gpmc_mem_root, res);
+	spin_unlock(&gpmc_mem_lock);
+
+	return r;
+}
+
+int gpmc_cs_request(int cs, unsigned long size, unsigned long *base)
+{
+	struct resource *res = &gpmc_cs_mem[cs];
+	int r = -1;
+
+	if (cs > GPMC_CS_NUM)
+		return -ENODEV;
+
+	size = gpmc_mem_align(size);
+	if (size > (1 << GPMC_SECTION_SHIFT))
+		return -ENOMEM;
+
+	spin_lock(&gpmc_mem_lock);
+	if (gpmc_cs_reserved(cs)) {
+		r = -EBUSY;
+		goto out;
+	}
+	if (gpmc_cs_mem_enabled(cs))
+		r = adjust_resource(res, res->start & ~(size - 1), size);
+	if (r < 0)
+		r = allocate_resource(&gpmc_mem_root, res, size, 0, ~0,
+				      size, NULL, NULL);
+	if (r < 0)
+		goto out;
+
+	gpmc_cs_enable_mem(cs, res->start, res->end - res->start + 1);
+	*base = res->start;
+	gpmc_cs_set_reserved(cs, 1);
+out:
+	spin_unlock(&gpmc_mem_lock);
+	return r;
+}
+
+void gpmc_cs_free(int cs)
+{
+	spin_lock(&gpmc_mem_lock);
+	if (cs >= GPMC_CS_NUM || !gpmc_cs_reserved(cs)) {
+		printk(KERN_ERR "Trying to free non-reserved GPMC CS%d\n", cs);
+		BUG();
+		spin_unlock(&gpmc_mem_lock);
+		return;
+	}
+	gpmc_cs_disable_mem(cs);
+	release_resource(&gpmc_cs_mem[cs]);
+	gpmc_cs_set_reserved(cs, 0);
+	spin_unlock(&gpmc_mem_lock);
+}
+
+void __init gpmc_mem_init(void)
+{
+	int cs;
+	unsigned long boot_rom_space = 0;
+
+	if (cpu_is_omap242x()) {
+		u32 l;
+		l = omap_readl(OMAP242X_CONTROL_STATUS);
+		/* In case of internal boot the 1st MB is redirected to the
+		 * boot ROM memory space.
+		 */
+		if (l & (1 << 3))
+			boot_rom_space = BOOT_ROM_SPACE;
+	} else
+		/* We assume internal boot if the mode can't be
+		 * determined.
+		 */
+		boot_rom_space = BOOT_ROM_SPACE;
+	gpmc_mem_root.start = GPMC_MEM_START + boot_rom_space;
+	gpmc_mem_root.end = GPMC_MEM_END;
+
+	/* Reserve all regions that has been set up by bootloader */
+	for (cs = 0; cs < GPMC_CS_NUM; cs++) {
+		u32 base, size;
+
+		if (!gpmc_cs_mem_enabled(cs))
+			continue;
+		gpmc_cs_get_memconf(cs, &base, &size);
+		if (gpmc_cs_insert_mem(cs, base, size) < 0)
+			BUG();
+	}
 }
 
 void __init gpmc_init(void)
@@ -206,4 +380,6 @@ void __init gpmc_init(void)
 	l &= 0x03 << 3;
 	l |= (0x02 << 3) | (1 << 0);
 	gpmc_write_reg(GPMC_SYSCONFIG, l);
+
+	gpmc_mem_init();
 }
diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c
index dfc3b35cc1ff..1ed2fff4691a 100644
--- a/arch/arm/mach-omap2/irq.c
+++ b/arch/arm/mach-omap2/irq.c
@@ -41,18 +41,6 @@ static struct omap_irq_bank {
 		.nr_irqs	= 96,
 	}, {
 		/* XXX: DSP INTC */
-
-#if 0
-	/*
-	 * Commented out for now until we fix the IVA clocking
-	 */
-#ifdef CONFIG_ARCH_OMAP2420
-	}, {
-		/* IVA INTC (2420 only) */
-		.base_reg	= OMAP24XX_IVA_INTC_BASE,
-		.nr_irqs	= 16,	/* Actually 32, but only 16 are used */
-#endif
-#endif
 	}
 };
 
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index 60ef084faffd..f538d0fdb13c 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -104,6 +104,20 @@ MUX_CFG_24XX("P20_24XX_TSC_IRQ",	0x108,	0,	0,	0,	1)
 MUX_CFG_24XX("K15_24XX_UART3_TX",	0x118,	0,	0,	0,	1)
 MUX_CFG_24XX("K14_24XX_UART3_RX",	0x119,	0,	0,	0,	1)
 
+/* MMC/SDIO */
+MUX_CFG_24XX("G19_24XX_MMC_CLKO",	0x0f3,	0,	0,	0,	1)
+MUX_CFG_24XX("H18_24XX_MMC_CMD",	0x0f4,	0,	0,	0,	1)
+MUX_CFG_24XX("F20_24XX_MMC_DAT0",	0x0f5,	0,	0,	0,	1)
+MUX_CFG_24XX("H14_24XX_MMC_DAT1",	0x0f6,	0,	0,	0,	1)
+MUX_CFG_24XX("E19_24XX_MMC_DAT2",	0x0f7,	0,	0,	0,	1)
+MUX_CFG_24XX("D19_24XX_MMC_DAT3",	0x0f8,	0,	0,	0,	1)
+MUX_CFG_24XX("F19_24XX_MMC_DAT_DIR0",	0x0f9,	0,	0,	0,	1)
+MUX_CFG_24XX("E20_24XX_MMC_DAT_DIR1",	0x0fa,	0,	0,	0,	1)
+MUX_CFG_24XX("F18_24XX_MMC_DAT_DIR2",	0x0fb,	0,	0,	0,	1)
+MUX_CFG_24XX("E18_24XX_MMC_DAT_DIR3",	0x0fc,	0,	0,	0,	1)
+MUX_CFG_24XX("G18_24XX_MMC_CMD_DIR",	0x0fd,	0,	0,	0,	1)
+MUX_CFG_24XX("H15_24XX_MMC_CLKI",	0x0fe,	0,	0,	0,	1)
+
 /* Keypad GPIO*/
 MUX_CFG_24XX("T19_24XX_KBR0",		0x106,	3,	1,	1,	1)
 MUX_CFG_24XX("R19_24XX_KBR1",		0x107,	3,	1,	1,	1)
diff --git a/arch/arm/mach-omap2/prcm.c b/arch/arm/mach-omap2/prcm.c
index c2bf57ef6825..90f530540c65 100644
--- a/arch/arm/mach-omap2/prcm.c
+++ b/arch/arm/mach-omap2/prcm.c
@@ -19,6 +19,8 @@
 
 #include "prcm-regs.h"
 
+extern void omap2_clk_prepare_for_reboot(void);
+
 u32 omap_prcm_get_reset_sources(void)
 {
 	return RM_RSTST_WKUP & 0x7f;
@@ -28,12 +30,6 @@ EXPORT_SYMBOL(omap_prcm_get_reset_sources);
 /* Resets clock rates and reboots the system. Only called from system.h */
 void omap_prcm_arch_reset(char mode)
 {
-	u32 rate;
-	struct clk *vclk, *sclk;
-
-	vclk = clk_get(NULL, "virt_prcm_set");
-	sclk = clk_get(NULL, "sys_ck");
-	rate = clk_get_rate(sclk);
-	clk_set_rate(vclk, rate);	/* go to bypass for OMAP limitation */
+	omap2_clk_prepare_for_reboot();
 	RM_RSTCTRL_WKUP |= 2;
 }
diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig
index bbd138be6a70..df37594c30f8 100644
--- a/arch/arm/mach-s3c2410/Kconfig
+++ b/arch/arm/mach-s3c2410/Kconfig
@@ -2,6 +2,13 @@ if ARCH_S3C2410
 
 menu "S3C24XX Implementations"
 
+config MACH_AML_M5900
+	bool "AML M5900 Series"
+	select CPU_S3C2410
+	help
+	   Say Y here if you are using the American Microsystems M5900 Series
+           <http://www.amltd.com>
+
 config MACH_ANUBIS
 	bool "Simtec Electronics ANUBIS"
 	select CPU_S3C2440
@@ -126,6 +133,12 @@ config MACH_NEXCODER_2440
 	help
  	  Say Y here if you are using the Nex Vision NEXCODER 2440 Light Board
 
+config MACH_VSTMS
+	bool "VMSTMS"
+	select CPU_S3C2412
+	help
+	  Say Y here if you are using an VSTMS board
+
 endmenu
 
 config S3C2410_CLOCK
@@ -133,10 +146,24 @@ config S3C2410_CLOCK
 	help
 	  Clock code for the S3C2410, and similar processors
 
+config S3C2410_PM
+	bool
+	depends on CONFIG_PM
+	help
+	  Power Management code common to S3C2410 and better
+
+config CPU_S3C2410_DMA
+	bool
+	depends on S3C2410_DMA && (CPU_S3C2410 || CPU_S3C2442)
+	default y if CPU_S3C2410 || CPU_S3C2442
+	help
+	  DMA device selection for S3C2410 and compatible CPUs
+
 config CPU_S3C2410
 	bool
 	depends on ARCH_S3C2410
 	select S3C2410_CLOCK
+	select S3C2410_PM
 	help
 	  Support for S3C2410 and S3C2410A family from the S3C24XX line
 	  of Samsung Mobile CPUs.
@@ -149,6 +176,13 @@ config CPU_S3C2412_ONLY
 		   !CPU_S3C2440 && !CPU_S3C2442 && CPU_S3C2412
 	default y if CPU_S3C2412
 
+config S3C2412_PM
+	bool
+	default y if PM
+	depends on CPU_S3C2412
+	help
+	  Internal config node to apply S3C2412 power management
+
 config CPU_S3C2412
 	bool
 	depends on ARCH_S3C2410
@@ -165,6 +199,7 @@ config CPU_S3C2440
 	bool
 	depends on ARCH_S3C2410
 	select S3C2410_CLOCK
+	select S3C2410_PM
 	select CPU_S3C244X
 	help
 	  Support for S3C2440 Samsung Mobile CPU based systems.
@@ -173,6 +208,7 @@ config CPU_S3C2442
 	bool
 	depends on ARCH_S3C2420
 	select S3C2410_CLOCK
+	select S3C2410_PM
 	select CPU_S3C244X
 	help
 	  Support for S3C2442 Samsung Mobile CPU based systems.
@@ -256,7 +292,7 @@ config S3C2410_PM_CHECK_CHUNKSIZE
 
 config PM_SIMTEC
 	bool
-	depends on PM && (ARCH_BAST || MACH_VR1000)
+	depends on PM && (ARCH_BAST || MACH_VR1000 || MACH_AML_M5900)
 	default y
 
 config S3C2410_LOWLEVEL_UART_PORT
diff --git a/arch/arm/mach-s3c2410/Makefile b/arch/arm/mach-s3c2410/Makefile
index 0eadec916214..d66013365b6b 100644
--- a/arch/arm/mach-s3c2410/Makefile
+++ b/arch/arm/mach-s3c2410/Makefile
@@ -9,6 +9,8 @@ obj-y			:= cpu.o irq.o time.o gpio.o clock.o devs.o
 obj-m			:=
 obj-n			:=
 obj-			:=
+obj-dma-y		:=
+obj-dma-n		:=
 
 # DMA
 obj-$(CONFIG_S3C2410_DMA)	+= dma.o
@@ -20,6 +22,10 @@ obj-$(CONFIG_CPU_S3C2400)	+= s3c2400-gpio.o
 
 obj-$(CONFIG_CPU_S3C2410)	+= s3c2410.o
 obj-$(CONFIG_CPU_S3C2410)	+= s3c2410-gpio.o
+obj-$(CONFIG_CPU_S3C2410)	+= s3c2410-irq.o
+
+obj-$(CONFIG_S3C2410_PM)	+= s3c2410-pm.o s3c2410-sleep.o
+obj-$(CONFIG_CPU_S3C2410_DMA)	+= s3c2410-dma.o
 
 # Power Management support
 
@@ -30,6 +36,9 @@ obj-$(CONFIG_PM_SIMTEC)		+= pm-simtec.o
 obj-$(CONFIG_CPU_S3C2412)	+= s3c2412.o
 obj-$(CONFIG_CPU_S3C2412)	+= s3c2412-irq.o
 obj-$(CONFIG_CPU_S3C2412)	+= s3c2412-clock.o
+obj-dma-$(CONFIG_CPU_S3C2412)	+= s3c2412-dma.o
+
+obj-$(CONFIG_S3C2412_PM)	+= s3c2412-pm.o
 
 #
 # S3C244X support
@@ -47,6 +56,7 @@ obj-$(CONFIG_CPU_S3C2440)	+= s3c2440.o s3c2440-dsc.o
 obj-$(CONFIG_CPU_S3C2440)	+= s3c2440-irq.o
 obj-$(CONFIG_CPU_S3C2440)	+= s3c2440-clock.o
 obj-$(CONFIG_CPU_S3C2440)	+= s3c2410-gpio.o
+obj-dma-$(CONFIG_CPU_S3C2440)	+= s3c2440-dma.o
 
 # S3C2442 support
 
@@ -57,8 +67,13 @@ obj-$(CONFIG_CPU_S3C2442)	+= s3c2442-clock.o
 
 obj-$(CONFIG_BAST_PC104_IRQ)	+= bast-irq.o
 
+# merge in dma objects
+
+obj-y				+= $(obj-dma-y)
+
 # machine specific support
 
+obj-$(CONFIG_MACH_AML_M5900)	+= mach-amlm5900.o
 obj-$(CONFIG_MACH_ANUBIS)	+= mach-anubis.o
 obj-$(CONFIG_MACH_OSIRIS)	+= mach-osiris.o
 obj-$(CONFIG_ARCH_BAST)		+= mach-bast.o usb-simtec.o
@@ -71,5 +86,6 @@ obj-$(CONFIG_MACH_VR1000)	+= mach-vr1000.o usb-simtec.o
 obj-$(CONFIG_MACH_RX3715)	+= mach-rx3715.o
 obj-$(CONFIG_MACH_OTOM)		+= mach-otom.o
 obj-$(CONFIG_MACH_NEXCODER_2440) += mach-nexcoder.o
+obj-$(CONFIG_MACH_VSTMS)	+= mach-vstms.o
 
 obj-$(CONFIG_MACH_SMDK)		+= common-smdk.o
 \ No newline at end of file
diff --git a/arch/arm/mach-s3c2410/bast-irq.c b/arch/arm/mach-s3c2410/bast-irq.c
index def4441d2442..440e9aa0211a 100644
--- a/arch/arm/mach-s3c2410/bast-irq.c
+++ b/arch/arm/mach-s3c2410/bast-irq.c
@@ -18,10 +18,6 @@
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- * Modifications:
- *     08-Jan-2003 BJD  Moved from central IRQ code
- *     21-Aug-2005 BJD  Fixed missing code and compile errors
 */
 
 
diff --git a/arch/arm/mach-s3c2410/cpu.c b/arch/arm/mach-s3c2410/cpu.c
index 1c3c6adae6c4..9d4899eddf1f 100644
--- a/arch/arm/mach-s3c2410/cpu.c
+++ b/arch/arm/mach-s3c2410/cpu.c
@@ -124,6 +124,15 @@ static struct cpu_table cpu_ids[] __initdata = {
 		.init		= s3c2412_init,
 		.name		= name_s3c2412,
 	},
+	{			/* a newer version of the s3c2412 */
+		.idcode		= 0x32412003,
+		.idmask		= 0xffffffff,
+		.map_io		= s3c2412_map_io,
+		.init_clocks	= s3c2412_init_clocks,
+		.init_uarts	= s3c2412_init_uarts,
+		.init		= s3c2412_init,
+		.name		= name_s3c2412,
+	},
 	{
 		.idcode		= 0x0,   /* S3C2400 doesn't have an idcode */
 		.idmask		= 0xffffffff,
diff --git a/arch/arm/mach-s3c2410/devs.h b/arch/arm/mach-s3c2410/devs.h
index 726e2eaf8797..14fb0bade716 100644
--- a/arch/arm/mach-s3c2410/devs.h
+++ b/arch/arm/mach-s3c2410/devs.h
@@ -8,11 +8,6 @@
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
- *
- * Modifications:
- *      18-Aug-2004 BJD  Created initial version
- *	27-Aug-2004 BJD  Added timers 0 through 3
- *	10-Feb-2005 BJD	 Added camera from guillaume.gourat@nexvision.tv
 */
 #include <linux/platform_device.h>
 
diff --git a/arch/arm/mach-s3c2410/dma.c b/arch/arm/mach-s3c2410/dma.c
index cc92a7b2db88..d264bbbd8bef 100644
--- a/arch/arm/mach-s3c2410/dma.c
+++ b/arch/arm/mach-s3c2410/dma.c
@@ -1,35 +1,16 @@
-/* linux/arch/arm/mach-bast/dma.c
+/* linux/arch/arm/mach-s3c2410/dma.c
  *
- * (c) 2003-2005 Simtec Electronics
+ * (c) 2003-2005,2006 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
  * S3C2410 DMA core
  *
- * http://www.simtec.co.uk/products/EB2410ITX/
+ * http://armlinux.simtec.co.uk/
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
- *
- * Changelog:
- *  27-Feb-2005 BJD  Added kmem cache for dma descriptors
- *  18-Nov-2004 BJD  Removed error for loading onto stopped channel
- *  10-Nov-2004 BJD  Ensure all external symbols exported for modules
- *  10-Nov-2004 BJD  Use sys_device and sysdev_class for power management
- *  08-Aug-2004 BJD  Apply rmk's suggestions
- *  21-Jul-2004 BJD  Ported to linux 2.6
- *  12-Jul-2004 BJD  Finished re-write and change of API
- *  06-Jul-2004 BJD  Rewrote dma code to try and cope with various problems
- *  23-May-2003 BJD  Created file
- *  19-Aug-2003 BJD  Cleanup, header fix, added URL
- *
- * This file is based on the Sangwook Lee/Samsung patches, re-written due
- * to various ommisions from the code (such as flexible dma configuration)
- * for use with the BAST system board.
- *
- * The re-write is pretty much complete, and should be good enough for any
- * possible DMA function
- */
+*/
 
 
 #ifdef CONFIG_S3C2410_DMA_DEBUG
@@ -55,10 +36,14 @@
 #include <asm/mach/dma.h>
 #include <asm/arch/map.h>
 
+#include "dma.h"
+
 /* io map for dma */
 static void __iomem *dma_base;
 static kmem_cache_t *dma_kmem;
 
+struct s3c24xx_dma_selection dma_sel;
+
 /* dma channel state information */
 struct s3c2410_dma_chan s3c2410_chans[S3C2410_DMA_CHANNELS];
 
@@ -79,7 +64,6 @@ dma_wrreg(struct s3c2410_dma_chan *chan, int reg, unsigned long val)
 	pr_debug("writing %08x to register %08x\n",(unsigned int)val,reg);
 	writel(val, dma_regaddr(chan, reg));
 }
-
 #endif
 
 #define dma_rdreg(chan, reg) readl((chan)->regs + (reg))
@@ -151,12 +135,20 @@ dmadbg_showregs(const char *fname, int line, struct s3c2410_dma_chan *chan)
 #define dbg_showchan(chan) do { } while(0)
 #endif /* CONFIG_S3C2410_DMA_DEBUG */
 
-#define check_channel(chan) \
-  do { if ((chan) >= S3C2410_DMA_CHANNELS) { \
-    printk(KERN_ERR "%s: invalid channel %d\n", __FUNCTION__, (chan)); \
-    return -EINVAL; \
-  } } while(0)
+static struct s3c2410_dma_chan *dma_chan_map[DMACH_MAX];
 
+/* lookup_dma_channel
+ *
+ * change the dma channel number given into a real dma channel id
+*/
+
+static struct s3c2410_dma_chan *lookup_dma_channel(unsigned int channel)
+{
+	if (channel & DMACH_LOW_LEVEL)
+		return &s3c2410_chans[channel & ~DMACH_LOW_LEVEL];
+	else
+		return dma_chan_map[channel];
+}
 
 /* s3c2410_dma_stats_timeout
  *
@@ -321,8 +313,10 @@ static inline void
 s3c2410_dma_buffdone(struct s3c2410_dma_chan *chan, struct s3c2410_dma_buf *buf,
 		     enum s3c2410_dma_buffresult result)
 {
+#if 0
 	pr_debug("callback_fn=%p, buf=%p, id=%p, size=%d, result=%d\n",
 		 chan->callback_fn, buf, buf->id, buf->size, result);
+#endif
 
 	if (chan->callback_fn != NULL) {
 		(chan->callback_fn)(chan, buf->id, buf->size, result);
@@ -439,7 +433,6 @@ s3c2410_dma_canload(struct s3c2410_dma_chan *chan)
 	return 0;
 }
 
-
 /* s3c2410_dma_enqueue
  *
  * queue an given buffer for dma transfer.
@@ -460,11 +453,12 @@ s3c2410_dma_canload(struct s3c2410_dma_chan *chan)
 int s3c2410_dma_enqueue(unsigned int channel, void *id,
 			dma_addr_t data, int size)
 {
-	struct s3c2410_dma_chan *chan = &s3c2410_chans[channel];
+	struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
 	struct s3c2410_dma_buf *buf;
 	unsigned long flags;
 
-	check_channel(channel);
+	if (chan == NULL)
+		return -EINVAL;
 
 	pr_debug("%s: id=%p, data=%08x, size=%d\n",
 		 __FUNCTION__, id, (unsigned int)data, size);
@@ -562,8 +556,10 @@ s3c2410_dma_freebuf(struct s3c2410_dma_buf *buf)
 static inline void
 s3c2410_dma_lastxfer(struct s3c2410_dma_chan *chan)
 {
+#if 0
 	pr_debug("dma%d: s3c2410_dma_lastxfer: load_state %d\n",
 		 chan->number, chan->load_state);
+#endif
 
 	switch (chan->load_state) {
 	case S3C2410_DMALOAD_NONE:
@@ -718,7 +714,8 @@ s3c2410_dma_irq(int irq, void *devpw, struct pt_regs *regs)
 		if (chan->load_state == S3C2410_DMALOAD_NONE) {
 			pr_debug("dma%d: end of transfer, stopping channel (%ld)\n",
 				 chan->number, jiffies);
-			s3c2410_dma_ctrl(chan->number, S3C2410_DMAOP_STOP);
+			s3c2410_dma_ctrl(chan->number | DMACH_LOW_LEVEL,
+					 S3C2410_DMAOP_STOP);
 		}
 	}
 
@@ -726,37 +723,34 @@ s3c2410_dma_irq(int irq, void *devpw, struct pt_regs *regs)
 	return IRQ_HANDLED;
 }
 
+static struct s3c2410_dma_chan *s3c2410_dma_map_channel(int channel);
+
 /* s3c2410_request_dma
  *
  * get control of an dma channel
 */
 
-int s3c2410_dma_request(unsigned int channel, struct s3c2410_dma_client *client,
+int s3c2410_dma_request(unsigned int channel,
+			struct s3c2410_dma_client *client,
 			void *dev)
 {
-	struct s3c2410_dma_chan *chan = &s3c2410_chans[channel];
+	struct s3c2410_dma_chan *chan;
 	unsigned long flags;
 	int err;
 
 	pr_debug("dma%d: s3c2410_request_dma: client=%s, dev=%p\n",
 		 channel, client->name, dev);
 
-	check_channel(channel);
-
 	local_irq_save(flags);
 
-	dbg_showchan(chan);
-
-	if (chan->in_use) {
-		if (client != chan->client) {
-			printk(KERN_ERR "dma%d: already in use\n", channel);
-			local_irq_restore(flags);
-			return -EBUSY;
-		} else {
-			printk(KERN_ERR "dma%d: client already has channel\n", channel);
-		}
+	chan = s3c2410_dma_map_channel(channel);
+	if (chan == NULL) {
+		local_irq_restore(flags);
+		return -EBUSY;
 	}
 
+	dbg_showchan(chan);
+
 	chan->client = client;
 	chan->in_use = 1;
 
@@ -809,14 +803,14 @@ EXPORT_SYMBOL(s3c2410_dma_request);
 
 int s3c2410_dma_free(dmach_t channel, struct s3c2410_dma_client *client)
 {
-	struct s3c2410_dma_chan *chan = &s3c2410_chans[channel];
+	struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
 	unsigned long flags;
 
-	check_channel(channel);
+	if (chan == NULL)
+		return -EINVAL;
 
 	local_irq_save(flags);
 
-
 	if (chan->client != client) {
 		printk(KERN_WARNING "dma%d: possible free from different client (channel %p, passed %p)\n",
 		       channel, chan->client, client);
@@ -837,8 +831,12 @@ int s3c2410_dma_free(dmach_t channel, struct s3c2410_dma_client *client)
 
 	if (chan->irq_claimed)
 		free_irq(chan->irq, (void *)chan);
+
 	chan->irq_claimed = 0;
 
+	if (!(channel & DMACH_LOW_LEVEL))
+		dma_chan_map[channel] = NULL;
+
 	local_irq_restore(flags);
 
 	return 0;
@@ -848,8 +846,8 @@ EXPORT_SYMBOL(s3c2410_dma_free);
 
 static int s3c2410_dma_dostop(struct s3c2410_dma_chan *chan)
 {
-	unsigned long tmp;
 	unsigned long flags;
+	unsigned long tmp;
 
 	pr_debug("%s:\n", __FUNCTION__);
 
@@ -997,9 +995,10 @@ s3c2410_dma_started(struct s3c2410_dma_chan *chan)
 int
 s3c2410_dma_ctrl(dmach_t channel, enum s3c2410_chan_op op)
 {
-	struct s3c2410_dma_chan *chan = &s3c2410_chans[channel];
+	struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
 
-	check_channel(channel);
+	if (chan == NULL)
+		return -EINVAL;
 
 	switch (op) {
 	case S3C2410_DMAOP_START:
@@ -1046,12 +1045,19 @@ int s3c2410_dma_config(dmach_t channel,
 		       int xferunit,
 		       int dcon)
 {
-	struct s3c2410_dma_chan *chan = &s3c2410_chans[channel];
+	struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
 
 	pr_debug("%s: chan=%d, xfer_unit=%d, dcon=%08x\n",
 		 __FUNCTION__, channel, xferunit, dcon);
 
-	check_channel(channel);
+	if (chan == NULL)
+		return -EINVAL;
+
+	printk("Initial dcon is %08x\n", dcon);
+
+	dcon |= chan->dcon & dma_sel.dcon_mask;
+
+	printk("New dcon is %08x\n", dcon);
 
 	switch (xferunit) {
 	case 1:
@@ -1086,9 +1092,10 @@ EXPORT_SYMBOL(s3c2410_dma_config);
 
 int s3c2410_dma_setflags(dmach_t channel, unsigned int flags)
 {
-	struct s3c2410_dma_chan *chan = &s3c2410_chans[channel];
+	struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
 
-	check_channel(channel);
+	if (chan == NULL)
+		return -EINVAL;
 
 	pr_debug("%s: chan=%p, flags=%08x\n", __FUNCTION__, chan, flags);
 
@@ -1106,9 +1113,10 @@ EXPORT_SYMBOL(s3c2410_dma_setflags);
 
 int s3c2410_dma_set_opfn(dmach_t channel, s3c2410_dma_opfn_t rtn)
 {
-	struct s3c2410_dma_chan *chan = &s3c2410_chans[channel];
+	struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
 
-	check_channel(channel);
+	if (chan == NULL)
+		return -EINVAL;
 
 	pr_debug("%s: chan=%p, op rtn=%p\n", __FUNCTION__, chan, rtn);
 
@@ -1121,9 +1129,10 @@ EXPORT_SYMBOL(s3c2410_dma_set_opfn);
 
 int s3c2410_dma_set_buffdone_fn(dmach_t channel, s3c2410_dma_cbfn_t rtn)
 {
-	struct s3c2410_dma_chan *chan = &s3c2410_chans[channel];
+	struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
 
-	check_channel(channel);
+	if (chan == NULL)
+		return -EINVAL;
 
 	pr_debug("%s: chan=%p, callback rtn=%p\n", __FUNCTION__, chan, rtn);
 
@@ -1153,9 +1162,10 @@ int s3c2410_dma_devconfig(int channel,
 			  int hwcfg,
 			  unsigned long devaddr)
 {
-	struct s3c2410_dma_chan *chan = &s3c2410_chans[channel];
+	struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
 
-	check_channel(channel);
+	if (chan == NULL)
+		return -EINVAL;
 
 	pr_debug("%s: source=%d, hwcfg=%08x, devaddr=%08lx\n",
 		 __FUNCTION__, (int)source, hwcfg, devaddr);
@@ -1200,9 +1210,10 @@ EXPORT_SYMBOL(s3c2410_dma_devconfig);
 
 int s3c2410_dma_getposition(dmach_t channel, dma_addr_t *src, dma_addr_t *dst)
 {
- 	struct s3c2410_dma_chan *chan = &s3c2410_chans[channel];
+ 	struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
 
- 	check_channel(channel);
+	if (chan == NULL)
+		return -EINVAL;
 
 	if (src != NULL)
  		*src = dma_rdreg(chan, S3C2410_DMA_DCSRC);
@@ -1252,7 +1263,7 @@ static int s3c2410_dma_resume(struct sys_device *dev)
 #define s3c2410_dma_resume  NULL
 #endif /* CONFIG_PM */
 
-static struct sysdev_class dma_sysclass = {
+struct sysdev_class dma_sysclass = {
 	set_kset_name("s3c24xx-dma"),
 	.suspend	= s3c2410_dma_suspend,
 	.resume		= s3c2410_dma_resume,
@@ -1265,7 +1276,6 @@ static void s3c2410_dma_cache_ctor(void *p, kmem_cache_t *c, unsigned long f)
 	memset(p, 0, sizeof(struct s3c2410_dma_buf));
 }
 
-
 /* initialisation code */
 
 static int __init s3c2410_init_dma(void)
@@ -1274,7 +1284,7 @@ static int __init s3c2410_init_dma(void)
 	int channel;
 	int ret;
 
-	printk("S3C2410 DMA Driver, (c) 2003-2004 Simtec Electronics\n");
+	printk("S3C24XX DMA Driver, (c) 2003-2004,2006 Simtec Electronics\n");
 
 	dma_base = ioremap(S3C24XX_PA_DMA, 0x200);
 	if (dma_base == NULL) {
@@ -1282,6 +1292,8 @@ static int __init s3c2410_init_dma(void)
 		return -ENOMEM;
 	}
 
+	printk("Registering sysclass\n");
+
 	ret = sysdev_class_register(&dma_sysclass);
 	if (ret != 0) {
 		printk(KERN_ERR "dma sysclass registration failed\n");
@@ -1335,4 +1347,95 @@ static int __init s3c2410_init_dma(void)
 	return ret;
 }
 
-__initcall(s3c2410_init_dma);
+core_initcall(s3c2410_init_dma);
+
+static inline int is_channel_valid(unsigned int channel)
+{
+	return (channel & DMA_CH_VALID);
+}
+
+/* s3c2410_dma_map_channel()
+ *
+ * turn the virtual channel number into a real, and un-used hardware
+ * channel.
+ *
+ * currently this code uses first-free channel from the specified harware
+ * map, not taking into account anything that the board setup code may
+ * have to say about the likely peripheral set to be in use.
+*/
+
+struct s3c2410_dma_chan *s3c2410_dma_map_channel(int channel)
+{
+	struct s3c24xx_dma_map *ch_map;
+	struct s3c2410_dma_chan *dmach;
+	int ch;
+
+	if (dma_sel.map == NULL || channel > dma_sel.map_size)
+		return NULL;
+
+	ch_map = dma_sel.map + channel;
+
+	for (ch = 0; ch < S3C2410_DMA_CHANNELS; ch++) {
+		if (!is_channel_valid(ch_map->channels[ch]))
+			continue;
+
+		if (s3c2410_chans[ch].in_use == 0) {
+			printk("mapped channel %d to %d\n", channel, ch);
+			break;
+		}
+	}
+
+	if (ch >= S3C2410_DMA_CHANNELS)
+		return NULL;
+
+	/* update our channel mapping */
+
+	dmach = &s3c2410_chans[ch];
+	dma_chan_map[channel] = dmach;
+
+	/* select the channel */
+
+	(dma_sel.select)(dmach, ch_map);
+
+	return dmach;
+}
+
+static void s3c24xx_dma_show_ch(struct s3c24xx_dma_map *map, int ch)
+{
+	/* show the channel configuration */
+
+	printk("%2d: %20s, channels %c%c%c%c\n", ch, map->name,
+	       (is_channel_valid(map->channels[0]) ? '0' : '-'),
+	       (is_channel_valid(map->channels[1]) ? '1' : '-'),
+	       (is_channel_valid(map->channels[2]) ? '2' : '-'),
+	       (is_channel_valid(map->channels[3]) ? '3' : '-'));
+}
+
+static int s3c24xx_dma_check_entry(struct s3c24xx_dma_map *map, int ch)
+{
+	if (1)
+		s3c24xx_dma_show_ch(map, ch);
+
+	return 0;
+}
+
+int __init s3c24xx_dma_init_map(struct s3c24xx_dma_selection *sel)
+{
+	struct s3c24xx_dma_map *nmap;
+	size_t map_sz = sizeof(*nmap) * sel->map_size;
+	int ptr;
+
+	nmap = kmalloc(map_sz, GFP_KERNEL);
+	if (nmap == NULL)
+		return -ENOMEM;
+
+	memcpy(nmap, sel->map, map_sz);
+	memcpy(&dma_sel, sel, sizeof(*sel));
+
+	dma_sel.map = nmap;
+
+	for (ptr = 0; ptr < sel->map_size; ptr++)
+		s3c24xx_dma_check_entry(nmap+ptr, ptr);
+
+	return 0;
+}
diff --git a/arch/arm/mach-s3c2410/dma.h b/arch/arm/mach-s3c2410/dma.h
new file mode 100644
index 000000000000..0ebfe0aab80b
--- /dev/null
+++ b/arch/arm/mach-s3c2410/dma.h
@@ -0,0 +1,45 @@
+/* arch/arm/mach-s3c2410/dma.h
+ *
+ * Copyright (C) 2006 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Samsung S3C24XX DMA support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+extern struct sysdev_class dma_sysclass;
+extern struct s3c2410_dma_chan s3c2410_chans[S3C2410_DMA_CHANNELS];
+
+#define DMA_CH_VALID		(1<<31)
+
+struct s3c24xx_dma_addr {
+	unsigned long		from;
+	unsigned long		to;
+};
+
+/* struct s3c24xx_dma_map
+ *
+ * this holds the mapping information for the channel selected
+ * to be connected to the specified device
+*/
+
+struct s3c24xx_dma_map {
+	const char		*name;
+	struct s3c24xx_dma_addr  hw_addr;
+
+	unsigned long		 channels[S3C2410_DMA_CHANNELS];
+};
+
+struct s3c24xx_dma_selection {
+	struct s3c24xx_dma_map	*map;
+	unsigned long		 map_size;
+	unsigned long		 dcon_mask;
+
+	void	(*select)(struct s3c2410_dma_chan *chan,
+			  struct s3c24xx_dma_map *map);
+};
+
+extern int s3c24xx_dma_init_map(struct s3c24xx_dma_selection *sel);
diff --git a/arch/arm/mach-s3c2410/gpio.c b/arch/arm/mach-s3c2410/gpio.c
index cd39e8684584..db6393c99860 100644
--- a/arch/arm/mach-s3c2410/gpio.c
+++ b/arch/arm/mach-s3c2410/gpio.c
@@ -18,21 +18,7 @@
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- * Changelog
- *	13-Sep-2004  BJD  Implemented change of MISCCR
- *	14-Sep-2004  BJD  Added getpin call
- *	14-Sep-2004  BJD  Fixed bug in setpin() call
- *	30-Sep-2004  BJD  Fixed cfgpin() mask bug
- *	01-Oct-2004  BJD  Added getcfg() to get pin configuration
- *	01-Oct-2004  BJD  Fixed mask bug in pullup() call
- *	01-Oct-2004  BJD  Added getirq() to turn pin into irqno
- *	04-Oct-2004  BJD  Added irq filter controls for GPIO
- *	05-Nov-2004  BJD  EXPORT_SYMBOL() added for all code
- *	13-Mar-2005  BJD  Updates for __iomem
- *	26-Oct-2005  BJD  Added generic configuration types
- *	15-Jan-2006  LCVR Added support for the S3C2400
- */
+*/
 
 
 #include <linux/kernel.h>
diff --git a/arch/arm/mach-s3c2410/irq.c b/arch/arm/mach-s3c2410/irq.c
index cd6139b35999..3e9f3462c61b 100644
--- a/arch/arm/mach-s3c2410/irq.c
+++ b/arch/arm/mach-s3c2410/irq.c
@@ -181,17 +181,19 @@ s3c_irq_unmask(unsigned int irqno)
 }
 
 struct irqchip s3c_irq_level_chip = {
-	.ack	   = s3c_irq_maskack,
-	.mask	   = s3c_irq_mask,
-	.unmask	   = s3c_irq_unmask,
-	.set_wake	   = s3c_irq_wake
+	.name		= "s3c-level",
+	.ack		= s3c_irq_maskack,
+	.mask		= s3c_irq_mask,
+	.unmask		= s3c_irq_unmask,
+	.set_wake	= s3c_irq_wake
 };
 
 static struct irqchip s3c_irq_chip = {
-	.ack	   = s3c_irq_ack,
-	.mask	   = s3c_irq_mask,
-	.unmask	   = s3c_irq_unmask,
-	.set_wake  = s3c_irq_wake
+	.name		= "s3c",
+	.ack		= s3c_irq_ack,
+	.mask		= s3c_irq_mask,
+	.unmask		= s3c_irq_unmask,
+	.set_wake	= s3c_irq_wake
 };
 
 static void
@@ -343,19 +345,21 @@ s3c_irqext_type(unsigned int irq, unsigned int type)
 }
 
 static struct irqchip s3c_irqext_chip = {
-	.mask	    = s3c_irqext_mask,
-	.unmask	    = s3c_irqext_unmask,
-	.ack	    = s3c_irqext_ack,
-	.set_type    = s3c_irqext_type,
-	.set_wake    = s3c_irqext_wake
+	.name		= "s3c-ext",
+	.mask		= s3c_irqext_mask,
+	.unmask		= s3c_irqext_unmask,
+	.ack		= s3c_irqext_ack,
+	.set_type	= s3c_irqext_type,
+	.set_wake	= s3c_irqext_wake
 };
 
 static struct irqchip s3c_irq_eint0t4 = {
-	.ack	   = s3c_irq_ack,
-	.mask	   = s3c_irq_mask,
-	.unmask	   = s3c_irq_unmask,
-	.set_wake  = s3c_irq_wake,
-	.set_type  = s3c_irqext_type,
+	.name		= "s3c-ext0",
+	.ack		= s3c_irq_ack,
+	.mask		= s3c_irq_mask,
+	.unmask		= s3c_irq_unmask,
+	.set_wake	= s3c_irq_wake,
+	.set_type	= s3c_irqext_type,
 };
 
 /* mask values for the parent registers for each of the interrupt types */
@@ -387,9 +391,10 @@ s3c_irq_uart0_ack(unsigned int irqno)
 }
 
 static struct irqchip s3c_irq_uart0 = {
-	.mask	    = s3c_irq_uart0_mask,
-	.unmask	    = s3c_irq_uart0_unmask,
-	.ack	    = s3c_irq_uart0_ack,
+	.name		= "s3c-uart0",
+	.mask		= s3c_irq_uart0_mask,
+	.unmask		= s3c_irq_uart0_unmask,
+	.ack		= s3c_irq_uart0_ack,
 };
 
 /* UART1 */
@@ -413,9 +418,10 @@ s3c_irq_uart1_ack(unsigned int irqno)
 }
 
 static struct irqchip s3c_irq_uart1 = {
-	.mask	    = s3c_irq_uart1_mask,
-	.unmask	    = s3c_irq_uart1_unmask,
-	.ack	    = s3c_irq_uart1_ack,
+	.name		= "s3c-uart1",
+	.mask		= s3c_irq_uart1_mask,
+	.unmask		= s3c_irq_uart1_unmask,
+	.ack		= s3c_irq_uart1_ack,
 };
 
 /* UART2 */
@@ -439,9 +445,10 @@ s3c_irq_uart2_ack(unsigned int irqno)
 }
 
 static struct irqchip s3c_irq_uart2 = {
-	.mask	    = s3c_irq_uart2_mask,
-	.unmask	    = s3c_irq_uart2_unmask,
-	.ack	    = s3c_irq_uart2_ack,
+	.name		= "s3c-uart2",
+	.mask		= s3c_irq_uart2_mask,
+	.unmask		= s3c_irq_uart2_unmask,
+	.ack		= s3c_irq_uart2_ack,
 };
 
 /* ADC and Touchscreen */
@@ -465,9 +472,10 @@ s3c_irq_adc_ack(unsigned int irqno)
 }
 
 static struct irqchip s3c_irq_adc = {
-	.mask	    = s3c_irq_adc_mask,
-	.unmask	    = s3c_irq_adc_unmask,
-	.ack	    = s3c_irq_adc_ack,
+	.name		= "s3c-adc",
+	.mask		= s3c_irq_adc_mask,
+	.unmask		= s3c_irq_adc_unmask,
+	.ack		= s3c_irq_adc_ack,
 };
 
 /* irq demux for adc */
@@ -569,23 +577,104 @@ s3c_irq_demux_uart2(unsigned int irq,
 }
 
 static void
-s3c_irq_demux_extint(unsigned int irq,
-		     struct irqdesc *desc,
-		     struct pt_regs *regs)
+s3c_irq_demux_extint8(unsigned int irq,
+		      struct irqdesc *desc,
+		      struct pt_regs *regs)
 {
 	unsigned long eintpnd = __raw_readl(S3C24XX_EINTPEND);
 	unsigned long eintmsk = __raw_readl(S3C24XX_EINTMASK);
 
 	eintpnd &= ~eintmsk;
+	eintpnd &= ~0xff;	/* ignore lower irqs */
 
-	if (eintpnd) {
-		irq = fls(eintpnd);
-		irq += (IRQ_EINT4 - (4 + 1));
+	/* we may as well handle all the pending IRQs here */
 
+	while (eintpnd) {
+		irq = __ffs(eintpnd);
+		eintpnd &= ~(1<<irq);
+
+		irq += (IRQ_EINT4 - 4);
 		desc_handle_irq(irq, irq_desc + irq, regs);
 	}
+
+}
+
+static void
+s3c_irq_demux_extint4t7(unsigned int irq,
+			struct irqdesc *desc,
+			struct pt_regs *regs)
+{
+	unsigned long eintpnd = __raw_readl(S3C24XX_EINTPEND);
+	unsigned long eintmsk = __raw_readl(S3C24XX_EINTMASK);
+
+	eintpnd &= ~eintmsk;
+	eintpnd &= 0xff;	/* only lower irqs */
+
+	/* we may as well handle all the pending IRQs here */
+
+	while (eintpnd) {
+		irq = __ffs(eintpnd);
+		eintpnd &= ~(1<<irq);
+
+		irq += (IRQ_EINT4 - 4);
+
+		desc_handle_irq(irq, irq_desc + irq, regs);
+	}
+}
+
+#ifdef CONFIG_PM
+
+static struct sleep_save irq_save[] = {
+	SAVE_ITEM(S3C2410_INTMSK),
+	SAVE_ITEM(S3C2410_INTSUBMSK),
+};
+
+/* the extint values move between the s3c2410/s3c2440 and the s3c2412
+ * so we use an array to hold them, and to calculate the address of
+ * the register at run-time
+*/
+
+static unsigned long save_extint[3];
+static unsigned long save_eintflt[4];
+static unsigned long save_eintmask;
+
+int s3c24xx_irq_suspend(struct sys_device *dev, pm_message_t state)
+{
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(save_extint); i++)
+		save_extint[i] = __raw_readl(S3C24XX_EXTINT0 + (i*4));
+
+	for (i = 0; i < ARRAY_SIZE(save_eintflt); i++)
+		save_eintflt[i] = __raw_readl(S3C24XX_EINFLT0 + (i*4));
+
+	s3c2410_pm_do_save(irq_save, ARRAY_SIZE(irq_save));
+	save_eintmask = __raw_readl(S3C24XX_EINTMASK);
+
+	return 0;
 }
 
+int s3c24xx_irq_resume(struct sys_device *dev)
+{
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(save_extint); i++)
+		__raw_writel(save_extint[i], S3C24XX_EXTINT0 + (i*4));
+
+	for (i = 0; i < ARRAY_SIZE(save_eintflt); i++)
+		__raw_writel(save_eintflt[i], S3C24XX_EINFLT0 + (i*4));
+
+	s3c2410_pm_do_restore(irq_save, ARRAY_SIZE(irq_save));
+	__raw_writel(save_eintmask, S3C24XX_EINTMASK);
+
+	return 0;
+}
+
+#else
+#define s3c24xx_irq_suspend NULL
+#define s3c24xx_irq_resume  NULL
+#endif
+
 /* s3c24xx_init_irq
  *
  * Initialise S3C2410 IRQ system
@@ -674,8 +763,8 @@ void __init s3c24xx_init_irq(void)
 
 	/* setup the cascade irq handlers */
 
-	set_irq_chained_handler(IRQ_EINT4t7, s3c_irq_demux_extint);
-	set_irq_chained_handler(IRQ_EINT8t23, s3c_irq_demux_extint);
+	set_irq_chained_handler(IRQ_EINT4t7, s3c_irq_demux_extint4t7);
+	set_irq_chained_handler(IRQ_EINT8t23, s3c_irq_demux_extint8);
 
 	set_irq_chained_handler(IRQ_UART0, s3c_irq_demux_uart0);
 	set_irq_chained_handler(IRQ_UART1, s3c_irq_demux_uart1);
diff --git a/arch/arm/mach-s3c2410/mach-amlm5900.c b/arch/arm/mach-s3c2410/mach-amlm5900.c
new file mode 100644
index 000000000000..ba5109af40b4
--- /dev/null
+++ b/arch/arm/mach-s3c2410/mach-amlm5900.c
@@ -0,0 +1,266 @@
+/***********************************************************************
+ *
+ * linux/arch/arm/mach-s3c2410/mach-amlm5900.c
+ *
+ * Copyright (c) 2006 American Microsystems Limited
+ *	David Anders <danders@amltd.com>
+
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * @History:
+ * derived from linux/arch/arm/mach-s3c2410/mach-bast.c, written by
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ ***********************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/proc_fs.h>
+
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/flash.h>
+
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+#include <asm/arch/fb.h>
+
+#include <asm/arch/regs-serial.h>
+#include <asm/arch/regs-lcd.h>
+#include <asm/arch/regs-gpio.h>
+
+#include "devs.h"
+#include "cpu.h"
+
+#ifdef CONFIG_MTD_PARTITIONS
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/physmap.h>
+
+static struct resource amlm5900_nor_resource = {
+		.start = 0x00000000,
+		.end   = 0x01000000 - 1,
+		.flags = IORESOURCE_MEM,
+};
+
+
+
+static struct mtd_partition amlm5900_mtd_partitions[] = {
+	{
+		.name		= "System",
+		.size		= 0x240000,
+		.offset		= 0,
+		.mask_flags 	= MTD_WRITEABLE,  /* force read-only */
+	}, {
+		.name		= "Kernel",
+		.size		= 0x100000,
+		.offset		= MTDPART_OFS_APPEND,
+	}, {
+		.name		= "Ramdisk",
+		.size		= 0x300000,
+		.offset		= MTDPART_OFS_APPEND,
+	}, {
+		.name		= "JFFS2",
+		.size		= 0x9A0000,
+		.offset		= MTDPART_OFS_APPEND,
+	}, {
+		.name		= "Settings",
+		.size		= MTDPART_SIZ_FULL,
+		.offset		= MTDPART_OFS_APPEND,
+	}
+};
+
+static struct physmap_flash_data amlm5900_flash_data = {
+	.width		= 2,
+	.parts		= amlm5900_mtd_partitions,
+	.nr_parts	= ARRAY_SIZE(amlm5900_mtd_partitions),
+};
+
+static struct platform_device amlm5900_device_nor = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev = {
+			.platform_data = &amlm5900_flash_data,
+		},
+	.num_resources	= 1,
+	.resource	= &amlm5900_nor_resource,
+};
+#endif
+
+static struct map_desc amlm5900_iodesc[] __initdata = {
+	{
+		.virtual	= (u32)S3C24XX_VA_SPI,
+		.pfn		= __phys_to_pfn(S3C2410_PA_SPI),
+		.length		= SZ_1M,
+		.type		= MT_DEVICE
+	}
+};
+
+#define UCON S3C2410_UCON_DEFAULT
+#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
+#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
+
+static struct s3c2410_uartcfg amlm5900_uartcfgs[] = {
+	[0] = {
+		.hwport	     = 0,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	},
+	[1] = {
+		.hwport	     = 1,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	},
+	[2] = {
+		.hwport	     = 2,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	}
+};
+
+
+static struct platform_device *amlm5900_devices[] __initdata = {
+#ifdef CONFIG_FB_S3C2410
+	&s3c_device_lcd,
+#endif
+	&s3c_device_adc,
+	&s3c_device_wdt,
+	&s3c_device_i2c,
+	&s3c_device_usb,
+ 	&s3c_device_rtc,
+	&s3c_device_usbgadget,
+        &s3c_device_sdi,
+#ifdef CONFIG_MTD_PARTITIONS
+	&amlm5900_device_nor,
+#endif
+};
+
+static struct s3c24xx_board amlm5900_board __initdata = {
+	.devices       = amlm5900_devices,
+	.devices_count = ARRAY_SIZE(amlm5900_devices)
+};
+
+void __init amlm5900_map_io(void)
+{
+	s3c24xx_init_io(amlm5900_iodesc, ARRAY_SIZE(amlm5900_iodesc));
+	s3c24xx_init_clocks(0);
+	s3c24xx_init_uarts(amlm5900_uartcfgs, ARRAY_SIZE(amlm5900_uartcfgs));
+	s3c24xx_set_board(&amlm5900_board);
+}
+
+#ifdef CONFIG_FB_S3C2410
+static struct s3c2410fb_mach_info __initdata amlm5900_lcd_info = {
+	.width		= 160,
+	.height		= 160,
+
+/* commented out until stn patch is submitted
+*	.type		= S3C2410_LCDCON1_STN4,
+*/
+	.gpccon =	0xaaaaaaaa,
+	.gpccon_mask =	0xffffffff,
+	.gpcup =	0x0000ffff,
+	.gpcup_mask =	0xffffffff,
+
+	.gpdcon =	0xaaaaaaaa,
+	.gpdcon_mask =	0xffffffff,
+	.gpdup =	0x0000ffff,
+	.gpdup_mask =	0xffffffff,
+
+	.xres		= {
+		.min		= 160,
+		.max		= 160,
+		.defval		= 160,
+	},
+
+	.yres		= {
+		.min		= 160,
+		.max	        = 160,
+		.defval		= 160,
+	},
+
+	.bpp		= {
+		.min		= 4,
+		.max		= 4,
+		.defval		= 4,
+	},
+
+	.regs		= {
+		.lcdcon1	= 0x00008225,
+		.lcdcon2	= 0x0027c000,
+		.lcdcon3	= 0x00182708,
+		.lcdcon4	= 0x00000002,
+		.lcdcon5	= 0x00000001,
+	}
+};
+#endif
+
+static irqreturn_t
+amlm5900_wake_interrupt(int irq, void *ignored, struct pt_regs *regs)
+{
+	return IRQ_HANDLED;
+}
+
+static void amlm5900_init_pm(void)
+{
+	int ret = 0;
+
+	ret = request_irq(IRQ_EINT9, &amlm5900_wake_interrupt,
+				IRQF_TRIGGER_RISING | IRQF_SHARED,
+				"amlm5900_wakeup", &amlm5900_wake_interrupt);
+	if (ret != 0) {
+		printk(KERN_ERR "AML-M5900: no wakeup irq, %d?\n", ret);
+	} else {
+		enable_irq_wake(IRQ_EINT9);
+		/* configure the suspend/resume status pin */
+		s3c2410_gpio_cfgpin(S3C2410_GPF2, S3C2410_GPF2_OUTP);
+		s3c2410_gpio_pullup(S3C2410_GPF2, 0);
+	}
+}
+static void __init amlm5900_init(void)
+{
+	amlm5900_init_pm();
+#ifdef CONFIG_FB_S3C2410
+	s3c24xx_fb_set_platdata(&amlm5900_lcd_info);
+#endif
+}
+
+MACHINE_START(AML_M5900, "AML_M5900")
+	.phys_io	= S3C2410_PA_UART,
+	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= S3C2410_SDRAM_PA + 0x100,
+	.map_io		= amlm5900_map_io,
+	.init_irq	= s3c24xx_init_irq,
+	.init_machine	= amlm5900_init,
+	.timer		= &s3c24xx_timer,
+MACHINE_END
diff --git a/arch/arm/mach-s3c2410/mach-anubis.c b/arch/arm/mach-s3c2410/mach-anubis.c
index 60641d452db3..e94cdcd96591 100644
--- a/arch/arm/mach-s3c2410/mach-anubis.c
+++ b/arch/arm/mach-s3c2410/mach-anubis.c
@@ -4,15 +4,9 @@
  *	http://armlinux.simtec.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>
  *
- *
- *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
- *
- * Modifications:
- *	02-May-2005 BJD  Copied from mach-bast.c
- *	20-Sep-2005 BJD  Added static to non-exported items
 */
 
 #include <linux/kernel.h>
diff --git a/arch/arm/mach-s3c2410/mach-smdk2440.c b/arch/arm/mach-s3c2410/mach-smdk2440.c
index d661c6b7ff56..e2205ff1b0ee 100644
--- a/arch/arm/mach-s3c2410/mach-smdk2440.c
+++ b/arch/arm/mach-s3c2410/mach-smdk2440.c
@@ -11,15 +11,6 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  *
- * Modifications:
- *	01-Nov-2004 BJD   Initial version
- *	12-Nov-2004 BJD   Updated for release
- *	04-Jan-2005 BJD   Fixes for pre-release
- *	22-Feb-2005 BJD   Updated for 2.6.11-rc5 relesa
- *	10-Mar-2005 LCVR  Replaced S3C2410_VA by S3C24XX_VA
- *	14-Mar-2005 BJD	  void __iomem fixes
- *	20-Sep-2005 BJD   Added static to non-exported items
- *	26-Oct-2005 BJD   Added framebuffer data
 */
 
 #include <linux/kernel.h>
diff --git a/arch/arm/mach-s3c2410/mach-vstms.c b/arch/arm/mach-s3c2410/mach-vstms.c
new file mode 100644
index 000000000000..ea554e7c006e
--- /dev/null
+++ b/arch/arm/mach-s3c2410/mach-vstms.c
@@ -0,0 +1,168 @@
+/* linux/arch/arm/mach-s3c2410/mach-vstms.c
+ *
+ * (C) 2006 Thomas Gleixner <tglx@linutronix.de>
+ *
+ * Derived from mach-smdk2413.c - (C) 2006 Simtec Electronics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/hardware.h>
+#include <asm/hardware/iomd.h>
+#include <asm/setup.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <asm/arch/regs-serial.h>
+#include <asm/arch/regs-gpio.h>
+#include <asm/arch/regs-lcd.h>
+
+#include <asm/arch/idle.h>
+#include <asm/arch/fb.h>
+
+#include <asm/arch/nand.h>
+
+#include "s3c2410.h"
+#include "s3c2412.h"
+#include "clock.h"
+#include "devs.h"
+#include "cpu.h"
+
+
+static struct map_desc vstms_iodesc[] __initdata = {
+};
+
+static struct s3c2410_uartcfg vstms_uartcfgs[] __initdata = {
+	[0] = {
+		.hwport	     = 0,
+		.flags	     = 0,
+		.ucon	     = 0x3c5,
+		.ulcon	     = 0x03,
+		.ufcon	     = 0x51,
+	},
+	[1] = {
+		.hwport	     = 1,
+		.flags	     = 0,
+		.ucon	     = 0x3c5,
+		.ulcon	     = 0x03,
+		.ufcon	     = 0x51,
+	},
+	[2] = {
+		.hwport	     = 2,
+		.flags	     = 0,
+		.ucon	     = 0x3c5,
+		.ulcon	     = 0x03,
+		.ufcon	     = 0x51,
+	}
+};
+
+static struct mtd_partition vstms_nand_part[] = {
+	[0] = {
+		.name	= "Boot Agent",
+		.size	= 0x7C000,
+		.offset	= 0,
+	},
+	[1] = {
+		.name	= "UBoot Config",
+		.offset = 0x7C000,
+		.size	= 0x4000,
+	},
+	[2] = {
+		.name	= "Kernel",
+		.offset = 0x80000,
+		.size	= 0x200000,
+	},
+	[3] = {
+		.name	= "RFS",
+		.offset	= 0x280000,
+		.size	= 0x3d80000,
+	},
+};
+
+static struct s3c2410_nand_set vstms_nand_sets[] = {
+	[0] = {
+		.name		= "NAND",
+		.nr_chips	= 1,
+		.nr_partitions	= ARRAY_SIZE(vstms_nand_part),
+		.partitions	= vstms_nand_part,
+	},
+};
+
+/* choose a set of timings which should suit most 512Mbit
+ * chips and beyond.
+*/
+
+static struct s3c2410_platform_nand vstms_nand_info = {
+	.tacls		= 20,
+	.twrph0		= 60,
+	.twrph1		= 20,
+	.nr_sets	= ARRAY_SIZE(vstms_nand_sets),
+	.sets		= vstms_nand_sets,
+};
+
+static struct platform_device *vstms_devices[] __initdata = {
+	&s3c_device_usb,
+	&s3c_device_wdt,
+	&s3c_device_i2c,
+	&s3c_device_iis,
+	&s3c_device_rtc,
+	&s3c_device_nand,
+};
+
+static struct s3c24xx_board vstms_board __initdata = {
+	.devices       = vstms_devices,
+	.devices_count = ARRAY_SIZE(vstms_devices)
+};
+
+static void __init vstms_fixup(struct machine_desc *desc,
+				  struct tag *tags, char **cmdline,
+				  struct meminfo *mi)
+{
+	if (tags != phys_to_virt(S3C2410_SDRAM_PA + 0x100)) {
+		mi->nr_banks=1;
+		mi->bank[0].start = 0x30000000;
+		mi->bank[0].size = SZ_64M;
+		mi->bank[0].node = 0;
+	}
+}
+
+static void __init vstms_map_io(void)
+{
+	s3c_device_nand.dev.platform_data = &vstms_nand_info;
+
+	s3c24xx_init_io(vstms_iodesc, ARRAY_SIZE(vstms_iodesc));
+	s3c24xx_init_clocks(12000000);
+	s3c24xx_init_uarts(vstms_uartcfgs, ARRAY_SIZE(vstms_uartcfgs));
+	s3c24xx_set_board(&vstms_board);
+}
+
+MACHINE_START(VSTMS, "VSTMS")
+	.phys_io	= S3C2410_PA_UART,
+	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= S3C2410_SDRAM_PA + 0x100,
+
+	.fixup		= vstms_fixup,
+	.init_irq	= s3c24xx_init_irq,
+	.map_io		= vstms_map_io,
+	.timer		= &s3c24xx_timer,
+MACHINE_END
diff --git a/arch/arm/mach-s3c2410/pm-simtec.c b/arch/arm/mach-s3c2410/pm-simtec.c
index 7b244566a436..42cd05e298f8 100644
--- a/arch/arm/mach-s3c2410/pm-simtec.c
+++ b/arch/arm/mach-s3c2410/pm-simtec.c
@@ -49,7 +49,8 @@ static __init int pm_simtec_init(void)
 	/* check which machine we are running on */
 
 	if (!machine_is_bast() && !machine_is_vr1000() &&
-	    !machine_is_anubis() && !machine_is_osiris())
+	    !machine_is_anubis() && !machine_is_osiris() &&
+	    !machine_is_aml_m5900())
 		return 0;
 
 	printk(KERN_INFO "Simtec Board Power Manangement" COPYRIGHT "\n");
diff --git a/arch/arm/mach-s3c2410/pm.c b/arch/arm/mach-s3c2410/pm.c
index a589fe76d915..b49a0b3b72b3 100644
--- a/arch/arm/mach-s3c2410/pm.c
+++ b/arch/arm/mach-s3c2410/pm.c
@@ -1,9 +1,9 @@
 /* linux/arch/arm/mach-s3c2410/pm.c
  *
- * Copyright (c) 2004 Simtec Electronics
+ * Copyright (c) 2004,2006 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
- * S3C2410 Power Manager (Suspend-To-RAM) support
+ * S3C24XX Power Manager (Suspend-To-RAM) support
  *
  * See Documentation/arm/Samsung-S3C24XX/Suspend.txt for more information
  *
@@ -24,9 +24,6 @@
  * Parts based on arch/arm/mach-pxa/pm.c
  *
  * Thanks to Dimitry Andric for debugging
- *
- * Modifications:
- *     10-Mar-2005 LCVR  Changed S3C2410_VA_UART to S3C24XX_VA_UART
 */
 
 #include <linux/init.h>
@@ -38,6 +35,7 @@
 #include <linux/ioport.h>
 #include <linux/delay.h>
 
+#include <asm/cacheflush.h>
 #include <asm/hardware.h>
 #include <asm/io.h>
 
@@ -55,14 +53,6 @@
 
 unsigned long s3c_pm_flags;
 
-/* cache functions from arch/arm/mm/proc-arm920.S */
-
-#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
-extern void arm920_flush_kern_cache_all(void);
-#else
-static void arm920_flush_kern_cache_all(void) { }
-#endif
-
 #define PFX "s3c24xx-pm: "
 
 static struct sleep_save core_save[] = {
@@ -92,19 +82,6 @@ static struct sleep_save core_save[] = {
 	SAVE_ITEM(S3C2410_REFRESH),
 };
 
-/* this lot should be really saved by the IRQ code */
-static struct sleep_save irq_save[] = {
-	SAVE_ITEM(S3C2410_EXTINT0),
-	SAVE_ITEM(S3C2410_EXTINT1),
-	SAVE_ITEM(S3C2410_EXTINT2),
-	SAVE_ITEM(S3C2410_EINFLT0),
-	SAVE_ITEM(S3C2410_EINFLT1),
-	SAVE_ITEM(S3C2410_EINFLT2),
-	SAVE_ITEM(S3C2410_EINFLT3),
-	SAVE_ITEM(S3C2410_EINTMASK),
-	SAVE_ITEM(S3C2410_INTMSK)
-};
-
 static struct sleep_save gpio_save[] = {
 	SAVE_ITEM(S3C2410_GPACON),
 	SAVE_ITEM(S3C2410_GPADAT),
@@ -165,7 +142,7 @@ static struct sleep_save uart_save[] = {
 
 extern void printascii(const char *);
 
-static void pm_dbg(const char *fmt, ...)
+void pm_dbg(const char *fmt, ...)
 {
 	va_list va;
 	char buff[256];
@@ -509,6 +486,9 @@ static void s3c2410_pm_configure_extint(void)
 	}
 }
 
+void (*pm_cpu_prep)(void);
+void (*pm_cpu_sleep)(void);
+
 #define any_allowed(mask, allow) (((mask) & (allow)) != (allow))
 
 /* s3c2410_pm_enter
@@ -519,7 +499,6 @@ static void s3c2410_pm_configure_extint(void)
 static int s3c2410_pm_enter(suspend_state_t state)
 {
 	unsigned long regs_save[16];
-	unsigned long tmp;
 
 	/* ensure the debug is initialised (if enabled) */
 
@@ -527,6 +506,11 @@ static int s3c2410_pm_enter(suspend_state_t state)
 
 	DBG("s3c2410_pm_enter(%d)\n", state);
 
+	if (pm_cpu_prep == NULL || pm_cpu_sleep == NULL) {
+		printk(KERN_ERR PFX "error: no cpu sleep functions set\n");
+		return -EINVAL;
+	}
+
 	if (state != PM_SUSPEND_MEM) {
 		printk(KERN_ERR PFX "error: only PM_SUSPEND_MEM supported\n");
 		return -EINVAL;
@@ -554,17 +538,9 @@ static int s3c2410_pm_enter(suspend_state_t state)
 
 	DBG("s3c2410_sleep_save_phys=0x%08lx\n", s3c2410_sleep_save_phys);
 
-	/* ensure at least GESTATUS3 has the resume address */
-
-	__raw_writel(virt_to_phys(s3c2410_cpu_resume), S3C2410_GSTATUS3);
-
-	DBG("GSTATUS3 0x%08x\n", __raw_readl(S3C2410_GSTATUS3));
-	DBG("GSTATUS4 0x%08x\n", __raw_readl(S3C2410_GSTATUS4));
-
 	/* save all necessary core registers not covered by the drivers */
 
 	s3c2410_pm_do_save(gpio_save, ARRAY_SIZE(gpio_save));
-	s3c2410_pm_do_save(irq_save, ARRAY_SIZE(irq_save));
 	s3c2410_pm_do_save(core_save, ARRAY_SIZE(core_save));
 	s3c2410_pm_do_save(uart_save, ARRAY_SIZE(uart_save));
 
@@ -581,10 +557,16 @@ static int s3c2410_pm_enter(suspend_state_t state)
 	/* ack any outstanding external interrupts before we go to sleep */
 
 	__raw_writel(__raw_readl(S3C2410_EINTPEND), S3C2410_EINTPEND);
+	__raw_writel(__raw_readl(S3C2410_INTPND), S3C2410_INTPND);
+	__raw_writel(__raw_readl(S3C2410_SRCPND), S3C2410_SRCPND);
+
+	/* call cpu specific preperation */
+
+	pm_cpu_prep();
 
 	/* flush cache back to ram */
 
-	arm920_flush_kern_cache_all();
+	flush_cache_all();
 
 	s3c2410_pm_check_store();
 
@@ -592,23 +574,23 @@ static int s3c2410_pm_enter(suspend_state_t state)
 
 	__raw_writel(0x00, S3C2410_CLKCON);  /* turn off clocks over sleep */
 
-	s3c2410_cpu_suspend(regs_save);
+	/* s3c2410_cpu_save will also act as our return point from when
+	 * we resume as it saves its own register state, so use the return
+	 * code to differentiate return from save and return from sleep */
+
+	if (s3c2410_cpu_save(regs_save) == 0) {
+		flush_cache_all();
+		pm_cpu_sleep();
+	}
 
 	/* restore the cpu state */
 
 	cpu_init();
 
-	/* unset the return-from-sleep flag, to ensure reset */
-
-	tmp = __raw_readl(S3C2410_GSTATUS2);
-	tmp &= S3C2410_GSTATUS2_OFFRESET;
-	__raw_writel(tmp, S3C2410_GSTATUS2);
-
 	/* restore the system state */
 
 	s3c2410_pm_do_restore_core(core_save, ARRAY_SIZE(core_save));
 	s3c2410_pm_do_restore(gpio_save, ARRAY_SIZE(gpio_save));
-	s3c2410_pm_do_restore(irq_save, ARRAY_SIZE(irq_save));
 	s3c2410_pm_do_restore(uart_save, ARRAY_SIZE(uart_save));
 
 	s3c2410_pm_debug_init();
diff --git a/arch/arm/mach-s3c2410/pm.h b/arch/arm/mach-s3c2410/pm.h
index 7a5e714c7386..ffe197a119fb 100644
--- a/arch/arm/mach-s3c2410/pm.h
+++ b/arch/arm/mach-s3c2410/pm.h
@@ -34,13 +34,19 @@ extern unsigned long s3c_irqwake_eintmask;
 extern unsigned long s3c_irqwake_intallow;
 extern unsigned long s3c_irqwake_eintallow;
 
+/* per-cpu sleep functions */
+
+extern void (*pm_cpu_prep)(void);
+extern void (*pm_cpu_sleep)(void);
+
 /* Flags for PM Control */
 
 extern unsigned long s3c_pm_flags;
 
 /* from sleep.S */
 
-extern void s3c2410_cpu_suspend(unsigned long *saveblk);
+extern int  s3c2410_cpu_save(unsigned long *saveblk);
+extern void s3c2410_cpu_suspend(void);
 extern void s3c2410_cpu_resume(void);
 
 extern unsigned long s3c2410_sleep_save_phys;
@@ -57,3 +63,11 @@ struct sleep_save {
 
 extern void s3c2410_pm_do_save(struct sleep_save *ptr, int count);
 extern void s3c2410_pm_do_restore(struct sleep_save *ptr, int count);
+
+#ifdef CONFIG_PM
+extern int s3c24xx_irq_suspend(struct sys_device *dev, pm_message_t state);
+extern int s3c24xx_irq_resume(struct sys_device *dev);
+#else
+#define s3c24xx_irq_suspend NULL
+#define s3c24xx_irq_resume  NULL
+#endif
diff --git a/arch/arm/mach-s3c2410/s3c2410-dma.c b/arch/arm/mach-s3c2410/s3c2410-dma.c
new file mode 100644
index 000000000000..51e5098b32e8
--- /dev/null
+++ b/arch/arm/mach-s3c2410/s3c2410-dma.c
@@ -0,0 +1,158 @@
+/* linux/arch/arm/mach-s3c2410/s3c2410-dma.c
+ *
+ * (c) 2006 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 DMA selection
+ *
+ * http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/sysdev.h>
+
+#include <asm/dma.h>
+#include <asm/arch/dma.h>
+#include "dma.h"
+
+#include "cpu.h"
+
+#include <asm/arch/regs-serial.h>
+#include <asm/arch/regs-gpio.h>
+#include <asm/arch/regs-ac97.h>
+#include <asm/arch/regs-mem.h>
+#include <asm/arch/regs-lcd.h>
+#include <asm/arch/regs-sdi.h>
+#include <asm/arch/regs-iis.h>
+#include <asm/arch/regs-spi.h>
+
+static struct s3c24xx_dma_map __initdata s3c2410_dma_mappings[] = {
+	[DMACH_XD0] = {
+		.name		= "xdreq0",
+		.channels[0]	= S3C2410_DCON_CH0_XDREQ0 | DMA_CH_VALID,
+	},
+	[DMACH_XD1] = {
+		.name		= "xdreq1",
+		.channels[1]	= S3C2410_DCON_CH1_XDREQ1 | DMA_CH_VALID,
+	},
+	[DMACH_SDI] = {
+		.name		= "sdi",
+		.channels[0]	= S3C2410_DCON_CH0_SDI | DMA_CH_VALID,
+		.channels[2]	= S3C2410_DCON_CH2_SDI | DMA_CH_VALID,
+		.channels[3]	= S3C2410_DCON_CH3_SDI | DMA_CH_VALID,
+		.hw_addr.to	= S3C2410_PA_IIS + S3C2410_IISFIFO,
+		.hw_addr.from	= S3C2410_PA_IIS + S3C2410_IISFIFO,
+	},
+	[DMACH_SPI0] = {
+		.name		= "spi0",
+		.channels[1]	= S3C2410_DCON_CH1_SPI | DMA_CH_VALID,
+		.hw_addr.to	= S3C2410_PA_SPI + S3C2410_SPTDAT,
+		.hw_addr.from	= S3C2410_PA_SPI + S3C2410_SPRDAT,
+	},
+	[DMACH_SPI1] = {
+		.name		= "spi1",
+		.channels[3]	= S3C2410_DCON_CH3_SPI | DMA_CH_VALID,
+		.hw_addr.to	= S3C2410_PA_SPI + 0x20 + S3C2410_SPTDAT,
+		.hw_addr.from	= S3C2410_PA_SPI + 0x20 + S3C2410_SPRDAT,
+	},
+	[DMACH_UART0] = {
+		.name		= "uart0",
+		.channels[0]	= S3C2410_DCON_CH0_UART0 | DMA_CH_VALID,
+		.hw_addr.to	= S3C2410_PA_UART0 + S3C2410_UTXH,
+		.hw_addr.from	= S3C2410_PA_UART0 + S3C2410_URXH,
+	},
+	[DMACH_UART1] = {
+		.name		= "uart1",
+		.channels[1]	= S3C2410_DCON_CH1_UART1 | DMA_CH_VALID,
+		.hw_addr.to	= S3C2410_PA_UART1 + S3C2410_UTXH,
+		.hw_addr.from	= S3C2410_PA_UART1 + S3C2410_URXH,
+	},
+      	[DMACH_UART2] = {
+		.name		= "uart2",
+		.channels[3]	= S3C2410_DCON_CH3_UART2 | DMA_CH_VALID,
+		.hw_addr.to	= S3C2410_PA_UART2 + S3C2410_UTXH,
+		.hw_addr.from	= S3C2410_PA_UART2 + S3C2410_URXH,
+	},
+	[DMACH_TIMER] = {
+		.name		= "timer",
+		.channels[0]	= S3C2410_DCON_CH0_TIMER | DMA_CH_VALID,
+		.channels[2]	= S3C2410_DCON_CH2_TIMER | DMA_CH_VALID,
+		.channels[3]	= S3C2410_DCON_CH3_TIMER | DMA_CH_VALID,
+	},
+	[DMACH_I2S_IN] = {
+		.name		= "i2s-sdi",
+		.channels[1]	= S3C2410_DCON_CH1_I2SSDI | DMA_CH_VALID,
+		.channels[2]	= S3C2410_DCON_CH2_I2SSDI | DMA_CH_VALID,
+		.hw_addr.from	= S3C2410_PA_IIS + S3C2410_IISFIFO,
+	},
+	[DMACH_I2S_OUT] = {
+		.name		= "i2s-sdo",
+		.channels[2]	= S3C2410_DCON_CH2_I2SSDO | DMA_CH_VALID,
+		.hw_addr.to	= S3C2410_PA_IIS + S3C2410_IISFIFO,
+	},
+	[DMACH_USB_EP1] = {
+		.name		= "usb-ep1",
+		.channels[0]	= S3C2410_DCON_CH0_USBEP1 | DMA_CH_VALID,
+	},
+	[DMACH_USB_EP2] = {
+		.name		= "usb-ep2",
+		.channels[1]	= S3C2410_DCON_CH1_USBEP2 | DMA_CH_VALID,
+	},
+	[DMACH_USB_EP3] = {
+		.name		= "usb-ep3",
+		.channels[2]	= S3C2410_DCON_CH2_USBEP3 | DMA_CH_VALID,
+	},
+	[DMACH_USB_EP4] = {
+		.name		= "usb-ep4",
+		.channels[3]	=S3C2410_DCON_CH3_USBEP4 | DMA_CH_VALID,
+	},
+};
+
+static void s3c2410_dma_select(struct s3c2410_dma_chan *chan,
+			       struct s3c24xx_dma_map *map)
+{
+	chan->dcon = map->channels[chan->number] & ~DMA_CH_VALID;
+}
+
+static struct s3c24xx_dma_selection __initdata s3c2410_dma_sel = {
+	.select		= s3c2410_dma_select,
+	.dcon_mask	= 7 << 24,
+	.map		= s3c2410_dma_mappings,
+	.map_size	= ARRAY_SIZE(s3c2410_dma_mappings),
+};
+
+static int s3c2410_dma_add(struct sys_device *sysdev)
+{
+	return s3c24xx_dma_init_map(&s3c2410_dma_sel);
+}
+
+static struct sysdev_driver s3c2410_dma_driver = {
+	.add	= s3c2410_dma_add,
+};
+
+static int __init s3c2410_dma_init(void)
+{
+	return sysdev_driver_register(&s3c2410_sysclass, &s3c2410_dma_driver);
+}
+
+arch_initcall(s3c2410_dma_init);
+
+/* S3C2442 DMA contains the same selection table as the S3C2410 */
+
+static struct sysdev_driver s3c2442_dma_driver = {
+	.add	= s3c2410_dma_add,
+};
+
+static int __init s3c2442_dma_init(void)
+{
+	return sysdev_driver_register(&s3c2442_sysclass, &s3c2442_dma_driver);
+}
+
+arch_initcall(s3c2442_dma_init);
+
+
diff --git a/arch/arm/mach-s3c2410/s3c2410-irq.c b/arch/arm/mach-s3c2410/s3c2410-irq.c
new file mode 100644
index 000000000000..c796c9c76e78
--- /dev/null
+++ b/arch/arm/mach-s3c2410/s3c2410-irq.c
@@ -0,0 +1,48 @@
+/* linux/arch/arm/mach-s3c2410/s3c2410-irq.c
+ *
+ * Copyright (c) 2006 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/ptrace.h>
+#include <linux/sysdev.h>
+
+#include "cpu.h"
+#include "pm.h"
+
+static int s3c2410_irq_add(struct sys_device *sysdev)
+{
+	return 0;
+}
+
+static struct sysdev_driver s3c2410_irq_driver = {
+	.add		= s3c2410_irq_add,
+	.suspend	= s3c24xx_irq_suspend,
+	.resume		= s3c24xx_irq_resume,
+};
+
+static int s3c2410_irq_init(void)
+{
+	return sysdev_driver_register(&s3c2410_sysclass, &s3c2410_irq_driver);
+}
+
+arch_initcall(s3c2410_irq_init);
diff --git a/arch/arm/mach-s3c2410/s3c2410-pm.c b/arch/arm/mach-s3c2410/s3c2410-pm.c
new file mode 100644
index 000000000000..e51d76669512
--- /dev/null
+++ b/arch/arm/mach-s3c2410/s3c2410-pm.c
@@ -0,0 +1,120 @@
+/* linux/arch/arm/mach-s3c2410/s3c2410-pm.c
+ *
+ * Copyright (c) 2006 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 (and compatible) Power Manager (Suspend-To-RAM) support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+*/
+
+#include <linux/init.h>
+#include <linux/suspend.h>
+#include <linux/errno.h>
+#include <linux/time.h>
+#include <linux/sysdev.h>
+
+#include <asm/hardware.h>
+#include <asm/io.h>
+
+#include <asm/mach-types.h>
+
+#include <asm/arch/regs-gpio.h>
+
+#include "cpu.h"
+#include "pm.h"
+
+#ifdef CONFIG_S3C2410_PM_DEBUG
+extern void pm_dbg(const char *fmt, ...);
+#define DBG(fmt...) pm_dbg(fmt)
+#else
+#define DBG(fmt...) printk(KERN_DEBUG fmt)
+#endif
+
+static void s3c2410_pm_prepare(void)
+{
+	/* ensure at least GSTATUS3 has the resume address */
+
+	__raw_writel(virt_to_phys(s3c2410_cpu_resume), S3C2410_GSTATUS3);
+
+	DBG("GSTATUS3 0x%08x\n", __raw_readl(S3C2410_GSTATUS3));
+	DBG("GSTATUS4 0x%08x\n", __raw_readl(S3C2410_GSTATUS4));
+
+	if ( machine_is_aml_m5900() )
+		s3c2410_gpio_setpin(S3C2410_GPF2, 1);
+
+}
+
+int s3c2410_pm_resume(struct sys_device *dev)
+{
+	unsigned long tmp;
+
+	/* unset the return-from-sleep flag, to ensure reset */
+
+	tmp = __raw_readl(S3C2410_GSTATUS2);
+	tmp &= S3C2410_GSTATUS2_OFFRESET;
+	__raw_writel(tmp, S3C2410_GSTATUS2);
+
+	if ( machine_is_aml_m5900() )
+		s3c2410_gpio_setpin(S3C2410_GPF2, 0);
+
+	return 0;
+}
+
+static int s3c2410_pm_add(struct sys_device *dev)
+{
+	pm_cpu_prep = s3c2410_pm_prepare;
+	pm_cpu_sleep = s3c2410_cpu_suspend;
+
+	return 0;
+}
+
+static struct sysdev_driver s3c2410_pm_driver = {
+	.add		= s3c2410_pm_add,
+	.resume		= s3c2410_pm_resume,
+};
+
+/* register ourselves */
+
+static int __init s3c2410_pm_drvinit(void)
+{
+	return sysdev_driver_register(&s3c2410_sysclass, &s3c2410_pm_driver);
+}
+
+arch_initcall(s3c2410_pm_drvinit);
+
+static struct sysdev_driver s3c2440_pm_driver = {
+	.add		= s3c2410_pm_add,
+	.resume		= s3c2410_pm_resume,
+};
+
+static int __init s3c2440_pm_drvinit(void)
+{
+	return sysdev_driver_register(&s3c2440_sysclass, &s3c2440_pm_driver);
+}
+
+arch_initcall(s3c2440_pm_drvinit);
+
+static struct sysdev_driver s3c2442_pm_driver = {
+	.add		= s3c2410_pm_add,
+	.resume		= s3c2410_pm_resume,
+};
+
+static int __init s3c2442_pm_drvinit(void)
+{
+	return sysdev_driver_register(&s3c2442_sysclass, &s3c2442_pm_driver);
+}
+
+arch_initcall(s3c2442_pm_drvinit);
diff --git a/arch/arm/mach-s3c2410/s3c2410-sleep.S b/arch/arm/mach-s3c2410/s3c2410-sleep.S
new file mode 100644
index 000000000000..9179a1024588
--- /dev/null
+++ b/arch/arm/mach-s3c2410/s3c2410-sleep.S
@@ -0,0 +1,68 @@
+/* linux/arch/arm/mach-s3c2410/s3c2410-sleep.S
+ *
+ * Copyright (c) 2004 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 Power Manager (Suspend-To-RAM) support
+ *
+ * Based on PXA/SA1100 sleep code by:
+ *	Nicolas Pitre, (c) 2002 Monta Vista Software Inc
+ *	Cliff Brake, (c) 2001
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+*/
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <asm/hardware.h>
+#include <asm/arch/map.h>
+
+#include <asm/arch/regs-gpio.h>
+#include <asm/arch/regs-clock.h>
+#include <asm/arch/regs-mem.h>
+#include <asm/arch/regs-serial.h>
+
+	/* s3c2410_cpu_suspend
+	 *
+	 * put the cpu into sleep mode
+	*/
+
+ENTRY(s3c2410_cpu_suspend)
+	@@ prepare cpu to sleep
+
+	ldr	r4, =S3C2410_REFRESH
+	ldr	r5, =S3C24XX_MISCCR
+	ldr	r6, =S3C2410_CLKCON
+	ldr	r7, [ r4 ]		@ get REFRESH (and ensure in TLB)
+	ldr	r8, [ r5 ]		@ get MISCCR (and ensure in TLB)
+	ldr	r9, [ r6 ]		@ get CLKCON (and ensure in TLB)
+
+	orr	r7, r7, #S3C2410_REFRESH_SELF	@ SDRAM sleep command
+	orr	r8, r8, #S3C2410_MISCCR_SDSLEEP @ SDRAM power-down signals
+	orr	r9, r9, #S3C2410_CLKCON_POWER	@ power down command
+
+	teq	pc, #0			@ first as a trial-run to load cache
+	bl	s3c2410_do_sleep
+	teq	r0, r0			@ now do it for real
+	b	s3c2410_do_sleep	@
+
+	@@ align next bit of code to cache line
+	.align	8
+s3c2410_do_sleep:
+	streq	r7, [ r4 ]			@ SDRAM sleep command
+	streq	r8, [ r5 ]			@ SDRAM power-down config
+	streq	r9, [ r6 ]			@ CPU sleep
+1:	beq	1b
+	mov	pc, r14
diff --git a/arch/arm/mach-s3c2410/s3c2410.c b/arch/arm/mach-s3c2410/s3c2410.c
index a110cff9cf6b..183e4033ce61 100644
--- a/arch/arm/mach-s3c2410/s3c2410.c
+++ b/arch/arm/mach-s3c2410/s3c2410.c
@@ -8,17 +8,6 @@
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
- *
- * Modifications:
- *     16-May-2003 BJD  Created initial version
- *     16-Aug-2003 BJD  Fixed header files and copyright, added URL
- *     05-Sep-2003 BJD  Moved to kernel v2.6
- *     18-Jan-2004 BJD  Added serial port configuration
- *     21-Aug-2004 BJD  Added new struct s3c2410_board handler
- *     28-Sep-2004 BJD  Updates for new serial port bits
- *     04-Nov-2004 BJD  Updated UART configuration process
- *     10-Jan-2005 BJD  Removed s3c2410_clock_tick_rate
- *     13-Aug-2005 DA   Removed UART from initial I/O mappings
 */
 
 #include <linux/kernel.h>
diff --git a/arch/arm/mach-s3c2410/s3c2412-dma.c b/arch/arm/mach-s3c2410/s3c2412-dma.c
new file mode 100644
index 000000000000..171f3706d36d
--- /dev/null
+++ b/arch/arm/mach-s3c2410/s3c2412-dma.c
@@ -0,0 +1,160 @@
+/* linux/arch/arm/mach-s3c2410/s3c2412-dma.c
+ *
+ * (c) 2006 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2412 DMA selection
+ *
+ * http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/sysdev.h>
+
+#include <asm/dma.h>
+#include <asm/arch/dma.h>
+#include <asm/io.h>
+
+#include "dma.h"
+#include "cpu.h"
+
+#include <asm/arch/regs-serial.h>
+#include <asm/arch/regs-gpio.h>
+#include <asm/arch/regs-ac97.h>
+#include <asm/arch/regs-mem.h>
+#include <asm/arch/regs-lcd.h>
+#include <asm/arch/regs-sdi.h>
+#include <asm/arch/regs-iis.h>
+#include <asm/arch/regs-spi.h>
+
+#define MAP(x) { (x)| DMA_CH_VALID, (x)| DMA_CH_VALID, (x)| DMA_CH_VALID, (x)| DMA_CH_VALID }
+
+static struct s3c24xx_dma_map __initdata s3c2412_dma_mappings[] = {
+	[DMACH_XD0] = {
+		.name		= "xdreq0",
+		.channels	= MAP(S3C2412_DMAREQSEL_XDREQ0),
+	},
+	[DMACH_XD1] = {
+		.name		= "xdreq1",
+		.channels	= MAP(S3C2412_DMAREQSEL_XDREQ1),
+	},
+	[DMACH_SDI] = {
+		.name		= "sdi",
+		.channels	= MAP(S3C2412_DMAREQSEL_SDI),
+		.hw_addr.to	= S3C2410_PA_IIS + S3C2410_IISFIFO,
+		.hw_addr.from	= S3C2410_PA_IIS + S3C2410_IISFIFO,
+	},
+	[DMACH_SPI0] = {
+		.name		= "spi0",
+		.channels	= MAP(S3C2412_DMAREQSEL_SPI0TX),
+		.hw_addr.to	= S3C2410_PA_SPI + S3C2410_SPTDAT,
+		.hw_addr.from	= S3C2410_PA_SPI + S3C2410_SPRDAT,
+	},
+	[DMACH_SPI1] = {
+		.name		= "spi1",
+		.channels	= MAP(S3C2412_DMAREQSEL_SPI1TX),
+		.hw_addr.to	= S3C2410_PA_SPI + 0x20 + S3C2410_SPTDAT,
+		.hw_addr.from	= S3C2410_PA_SPI + 0x20 + S3C2410_SPRDAT,
+	},
+	[DMACH_UART0] = {
+		.name		= "uart0",
+		.channels	= MAP(S3C2412_DMAREQSEL_UART0_0),
+		.hw_addr.to	= S3C2410_PA_UART0 + S3C2410_UTXH,
+		.hw_addr.from	= S3C2410_PA_UART0 + S3C2410_URXH,
+	},
+	[DMACH_UART1] = {
+		.name		= "uart1",
+		.channels	= MAP(S3C2412_DMAREQSEL_UART1_0),
+		.hw_addr.to	= S3C2410_PA_UART1 + S3C2410_UTXH,
+		.hw_addr.from	= S3C2410_PA_UART1 + S3C2410_URXH,
+	},
+      	[DMACH_UART2] = {
+		.name		= "uart2",
+		.channels	= MAP(S3C2412_DMAREQSEL_UART2_0),
+		.hw_addr.to	= S3C2410_PA_UART2 + S3C2410_UTXH,
+		.hw_addr.from	= S3C2410_PA_UART2 + S3C2410_URXH,
+	},
+	[DMACH_UART0_SRC2] = {
+		.name		= "uart0",
+		.channels	= MAP(S3C2412_DMAREQSEL_UART0_1),
+		.hw_addr.to	= S3C2410_PA_UART0 + S3C2410_UTXH,
+		.hw_addr.from	= S3C2410_PA_UART0 + S3C2410_URXH,
+	},
+	[DMACH_UART1_SRC2] = {
+		.name		= "uart1",
+		.channels	= MAP(S3C2412_DMAREQSEL_UART1_1),
+		.hw_addr.to	= S3C2410_PA_UART1 + S3C2410_UTXH,
+		.hw_addr.from	= S3C2410_PA_UART1 + S3C2410_URXH,
+	},
+      	[DMACH_UART2_SRC2] = {
+		.name		= "uart2",
+		.channels	= MAP(S3C2412_DMAREQSEL_UART2_1),
+		.hw_addr.to	= S3C2410_PA_UART2 + S3C2410_UTXH,
+		.hw_addr.from	= S3C2410_PA_UART2 + S3C2410_URXH,
+	},
+	[DMACH_TIMER] = {
+		.name		= "timer",
+		.channels	= MAP(S3C2412_DMAREQSEL_TIMER),
+	},
+	[DMACH_I2S_IN] = {
+		.name		= "i2s-sdi",
+		.channels	= MAP(S3C2412_DMAREQSEL_I2SRX),
+		.hw_addr.from	= S3C2410_PA_IIS + S3C2410_IISFIFO,
+	},
+	[DMACH_I2S_OUT] = {
+		.name		= "i2s-sdo",
+		.channels	= MAP(S3C2412_DMAREQSEL_I2STX),
+		.hw_addr.to	= S3C2410_PA_IIS + S3C2410_IISFIFO,
+	},
+	[DMACH_USB_EP1] = {
+		.name		= "usb-ep1",
+		.channels	= MAP(S3C2412_DMAREQSEL_USBEP1),
+	},
+	[DMACH_USB_EP2] = {
+		.name		= "usb-ep2",
+		.channels	= MAP(S3C2412_DMAREQSEL_USBEP2),
+	},
+	[DMACH_USB_EP3] = {
+		.name		= "usb-ep3",
+		.channels	= MAP(S3C2412_DMAREQSEL_USBEP3),
+	},
+	[DMACH_USB_EP4] = {
+		.name		= "usb-ep4",
+		.channels	= MAP(S3C2412_DMAREQSEL_USBEP4),
+	},
+};
+
+static void s3c2412_dma_select(struct s3c2410_dma_chan *chan,
+			       struct s3c24xx_dma_map *map)
+{
+	writel(chan->regs + S3C2412_DMA_DMAREQSEL,
+	       map->channels[0] | S3C2412_DMAREQSEL_HW);
+}
+
+static struct s3c24xx_dma_selection __initdata s3c2412_dma_sel = {
+	.select		= s3c2412_dma_select,
+	.dcon_mask	= 0,
+	.map		= s3c2412_dma_mappings,
+	.map_size	= ARRAY_SIZE(s3c2412_dma_mappings),
+};
+
+static int s3c2412_dma_add(struct sys_device *sysdev)
+{
+	return s3c24xx_dma_init_map(&s3c2412_dma_sel);
+}
+
+static struct sysdev_driver s3c2412_dma_driver = {
+	.add	= s3c2412_dma_add,
+};
+
+static int __init s3c2412_dma_init(void)
+{
+	return sysdev_driver_register(&s3c2412_sysclass, &s3c2412_dma_driver);
+}
+
+arch_initcall(s3c2412_dma_init);
diff --git a/arch/arm/mach-s3c2410/s3c2412-irq.c b/arch/arm/mach-s3c2410/s3c2412-irq.c
index c80ec93dfea9..7f741547658f 100644
--- a/arch/arm/mach-s3c2410/s3c2412-irq.c
+++ b/arch/arm/mach-s3c2410/s3c2412-irq.c
@@ -37,6 +37,7 @@
 
 #include "cpu.h"
 #include "irq.h"
+#include "pm.h"
 
 /* the s3c2412 changes the behaviour of IRQ_EINT0 through IRQ_EINT3 by
  * having them turn up in both the INT* and the EINT* registers. Whilst
@@ -120,6 +121,8 @@ static int s3c2412_irq_add(struct sys_device *sysdev)
 
 static struct sysdev_driver s3c2412_irq_driver = {
 	.add		= s3c2412_irq_add,
+	.suspend	= s3c24xx_irq_suspend,
+	.resume		= s3c24xx_irq_resume,
 };
 
 static int s3c2412_irq_init(void)
diff --git a/arch/arm/mach-s3c2410/s3c2412-pm.c b/arch/arm/mach-s3c2410/s3c2412-pm.c
new file mode 100644
index 000000000000..19b63322d259
--- /dev/null
+++ b/arch/arm/mach-s3c2410/s3c2412-pm.c
@@ -0,0 +1,128 @@
+/* linux/arch/arm/mach-s3c2410/s3c2412-pm.c
+ *
+ * Copyright (c) 2006 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * http://armlinux.simtec.co.uk/.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/sysdev.h>
+#include <linux/platform_device.h>
+
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+
+#include <asm/arch/regs-power.h>
+#include <asm/arch/regs-gpioj.h>
+#include <asm/arch/regs-gpio.h>
+#include <asm/arch/regs-dsc.h>
+
+#include "cpu.h"
+#include "pm.h"
+
+#include "s3c2412.h"
+
+static void s3c2412_cpu_suspend(void)
+{
+	unsigned long tmp;
+
+	/* set our standby method to sleep */
+
+	tmp = __raw_readl(S3C2412_PWRCFG);
+	tmp |= S3C2412_PWRCFG_STANDBYWFI_SLEEP;
+	__raw_writel(tmp, S3C2412_PWRCFG);
+
+	/* issue the standby signal into the pm unit. Note, we
+	 * issue a write-buffer drain just in case */
+
+	tmp = 0;
+
+	asm("b 1f\n\t"
+	    ".align 5\n\t"
+	    "1:\n\t"
+	    "mcr p15, 0, %0, c7, c10, 4\n\t"
+	    "mcr p15, 0, %0, c7, c0, 4" :: "r" (tmp));
+
+	/* we should never get past here */
+
+	panic("sleep resumed to originator?");
+}
+
+static void s3c2412_pm_prepare(void)
+{
+}
+
+static int s3c2412_pm_add(struct sys_device *sysdev)
+{
+	pm_cpu_prep = s3c2412_pm_prepare;
+	pm_cpu_sleep = s3c2412_cpu_suspend;
+
+	return 0;
+}
+
+static struct sleep_save s3c2412_sleep[] = {
+	SAVE_ITEM(S3C2412_DSC0),
+	SAVE_ITEM(S3C2412_DSC1),
+	SAVE_ITEM(S3C2413_GPJDAT),
+	SAVE_ITEM(S3C2413_GPJCON),
+	SAVE_ITEM(S3C2413_GPJUP),
+
+	/* save the PWRCFG to get back to original sleep method */
+
+	SAVE_ITEM(S3C2412_PWRCFG),
+
+	/* save the sleep configuration anyway, just in case these
+	 * get damaged during wakeup */
+
+	SAVE_ITEM(S3C2412_GPBSLPCON),
+	SAVE_ITEM(S3C2412_GPCSLPCON),
+	SAVE_ITEM(S3C2412_GPDSLPCON),
+	SAVE_ITEM(S3C2412_GPESLPCON),
+	SAVE_ITEM(S3C2412_GPFSLPCON),
+	SAVE_ITEM(S3C2412_GPGSLPCON),
+	SAVE_ITEM(S3C2412_GPHSLPCON),
+	SAVE_ITEM(S3C2413_GPJSLPCON),
+};
+
+static int s3c2412_pm_suspend(struct sys_device *dev, pm_message_t state)
+{
+	s3c2410_pm_do_save(s3c2412_sleep, ARRAY_SIZE(s3c2412_sleep));
+	return 0;
+}
+
+static int s3c2412_pm_resume(struct sys_device *dev)
+{
+	unsigned long tmp;
+
+	tmp = __raw_readl(S3C2412_PWRCFG);
+	tmp &= ~S3C2412_PWRCFG_STANDBYWFI_MASK;
+	tmp |=  S3C2412_PWRCFG_STANDBYWFI_IDLE;
+	__raw_writel(tmp, S3C2412_PWRCFG);
+
+	s3c2410_pm_do_restore(s3c2412_sleep, ARRAY_SIZE(s3c2412_sleep));
+	return 0;
+}
+
+static struct sysdev_driver s3c2412_pm_driver = {
+	.add		= s3c2412_pm_add,
+	.suspend	= s3c2412_pm_suspend,
+	.resume		= s3c2412_pm_resume,
+};
+
+static __init int s3c2412_pm_init(void)
+{
+	return sysdev_driver_register(&s3c2412_sysclass, &s3c2412_pm_driver);
+}
+
+arch_initcall(s3c2412_pm_init);
diff --git a/arch/arm/mach-s3c2410/s3c2412.c b/arch/arm/mach-s3c2410/s3c2412.c
index 2d163f7600be..e76431c41461 100644
--- a/arch/arm/mach-s3c2410/s3c2412.c
+++ b/arch/arm/mach-s3c2410/s3c2412.c
@@ -8,17 +8,6 @@
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
- *
- * Modifications:
- *     16-May-2003 BJD  Created initial version
- *     16-Aug-2003 BJD  Fixed header files and copyright, added URL
- *     05-Sep-2003 BJD  Moved to kernel v2.6
- *     18-Jan-2004 BJD  Added serial port configuration
- *     21-Aug-2004 BJD  Added new struct s3c2410_board handler
- *     28-Sep-2004 BJD  Updates for new serial port bits
- *     04-Nov-2004 BJD  Updated UART configuration process
- *     10-Jan-2005 BJD  Removed s3c2410_clock_tick_rate
- *     13-Aug-2005 DA   Removed UART from initial I/O mappings
 */
 
 #include <linux/kernel.h>
@@ -56,6 +45,13 @@
 
 #ifndef CONFIG_CPU_S3C2412_ONLY
 void __iomem *s3c24xx_va_gpio2 = S3C24XX_VA_GPIO;
+
+static inline void s3c2412_init_gpio2(void)
+{
+	s3c24xx_va_gpio2 = S3C24XX_VA_GPIO + 0x10;
+}
+#else
+#define s3c2412_init_gpio2() do { } while(0)
 #endif
 
 /* Initial IO mappings */
@@ -76,6 +72,7 @@ void __init s3c2412_init_uarts(struct s3c2410_uartcfg *cfg, int no)
 
 	/* rename devices that are s3c2412/s3c2413 specific */
 	s3c_device_sdi.name  = "s3c2412-sdi";
+	s3c_device_lcd.name  = "s3c2412-lcd";
 	s3c_device_nand.name = "s3c2412-nand";
 }
 
@@ -110,7 +107,7 @@ void __init s3c2412_map_io(struct map_desc *mach_desc, int mach_size)
 {
 	/* move base of IO */
 
-	s3c24xx_va_gpio2 = S3C24XX_VA_GPIO + 0x10;
+	s3c2412_init_gpio2();
 
 	/* set our idle function */
 
@@ -161,48 +158,8 @@ void __init s3c2412_init_clocks(int xtal)
  * as a driver which may support both 2410 and 2440 may try and use it.
 */
 
-#ifdef CONFIG_PM
-static struct sleep_save s3c2412_sleep[] = {
-	SAVE_ITEM(S3C2412_DSC0),
-	SAVE_ITEM(S3C2412_DSC1),
-	SAVE_ITEM(S3C2413_GPJDAT),
-	SAVE_ITEM(S3C2413_GPJCON),
-	SAVE_ITEM(S3C2413_GPJUP),
-
-	/* save the sleep configuration anyway, just in case these
-	 * get damaged during wakeup */
-
-	SAVE_ITEM(S3C2412_GPBSLPCON),
-	SAVE_ITEM(S3C2412_GPCSLPCON),
-	SAVE_ITEM(S3C2412_GPDSLPCON),
-	SAVE_ITEM(S3C2412_GPESLPCON),
-	SAVE_ITEM(S3C2412_GPFSLPCON),
-	SAVE_ITEM(S3C2412_GPGSLPCON),
-	SAVE_ITEM(S3C2412_GPHSLPCON),
-	SAVE_ITEM(S3C2413_GPJSLPCON),
-};
-
-static int s3c2412_suspend(struct sys_device *dev, pm_message_t state)
-{
-	s3c2410_pm_do_save(s3c2412_sleep, ARRAY_SIZE(s3c2412_sleep));
-	return 0;
-}
-
-static int s3c2412_resume(struct sys_device *dev)
-{
-	s3c2410_pm_do_restore(s3c2412_sleep, ARRAY_SIZE(s3c2412_sleep));
-	return 0;
-}
-
-#else
-#define s3c2412_suspend NULL
-#define s3c2412_resume  NULL
-#endif
-
 struct sysdev_class s3c2412_sysclass = {
 	set_kset_name("s3c2412-core"),
-	.suspend	= s3c2412_suspend,
-	.resume		= s3c2412_resume
 };
 
 static int __init s3c2412_core_init(void)
diff --git a/arch/arm/mach-s3c2410/s3c2440-dma.c b/arch/arm/mach-s3c2410/s3c2440-dma.c
new file mode 100644
index 000000000000..11e109c84a15
--- /dev/null
+++ b/arch/arm/mach-s3c2410/s3c2440-dma.c
@@ -0,0 +1,164 @@
+/* linux/arch/arm/mach-s3c2410/s3c2440-dma.c
+ *
+ * (c) 2006 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2440 DMA selection
+ *
+ * http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/sysdev.h>
+
+#include <asm/dma.h>
+#include <asm/arch/dma.h>
+#include "dma.h"
+
+#include "cpu.h"
+
+#include <asm/arch/regs-serial.h>
+#include <asm/arch/regs-gpio.h>
+#include <asm/arch/regs-ac97.h>
+#include <asm/arch/regs-mem.h>
+#include <asm/arch/regs-lcd.h>
+#include <asm/arch/regs-sdi.h>
+#include <asm/arch/regs-iis.h>
+#include <asm/arch/regs-spi.h>
+
+static struct s3c24xx_dma_map __initdata s3c2440_dma_mappings[] = {
+	[DMACH_XD0] = {
+		.name		= "xdreq0",
+		.channels[0]	= S3C2410_DCON_CH0_XDREQ0 | DMA_CH_VALID,
+	},
+	[DMACH_XD1] = {
+		.name		= "xdreq1",
+		.channels[1]	= S3C2410_DCON_CH1_XDREQ1 | DMA_CH_VALID,
+	},
+	[DMACH_SDI] = {
+		.name		= "sdi",
+		.channels[0]	= S3C2410_DCON_CH0_SDI | DMA_CH_VALID,
+		.channels[1]	= S3C2440_DCON_CH1_SDI | DMA_CH_VALID,
+		.channels[2]	= S3C2410_DCON_CH2_SDI | DMA_CH_VALID,
+		.channels[3]	= S3C2410_DCON_CH3_SDI | DMA_CH_VALID,
+		.hw_addr.to	= S3C2410_PA_IIS + S3C2410_IISFIFO,
+		.hw_addr.from	= S3C2410_PA_IIS + S3C2410_IISFIFO,
+	},
+	[DMACH_SPI0] = {
+		.name		= "spi0",
+		.channels[1]	= S3C2410_DCON_CH1_SPI | DMA_CH_VALID,
+		.hw_addr.to	= S3C2410_PA_SPI + S3C2410_SPTDAT,
+		.hw_addr.from	= S3C2410_PA_SPI + S3C2410_SPRDAT,
+	},
+	[DMACH_SPI1] = {
+		.name		= "spi1",
+		.channels[3]	= S3C2410_DCON_CH3_SPI | DMA_CH_VALID,
+		.hw_addr.to	= S3C2410_PA_SPI + 0x20 + S3C2410_SPTDAT,
+		.hw_addr.from	= S3C2410_PA_SPI + 0x20 + S3C2410_SPRDAT,
+	},
+	[DMACH_UART0] = {
+		.name		= "uart0",
+		.channels[0]	= S3C2410_DCON_CH0_UART0 | DMA_CH_VALID,
+		.hw_addr.to	= S3C2410_PA_UART0 + S3C2410_UTXH,
+		.hw_addr.from	= S3C2410_PA_UART0 + S3C2410_URXH,
+	},
+	[DMACH_UART1] = {
+		.name		= "uart1",
+		.channels[1]	= S3C2410_DCON_CH1_UART1 | DMA_CH_VALID,
+		.hw_addr.to	= S3C2410_PA_UART1 + S3C2410_UTXH,
+		.hw_addr.from	= S3C2410_PA_UART1 + S3C2410_URXH,
+	},
+      	[DMACH_UART2] = {
+		.name		= "uart2",
+		.channels[3]	= S3C2410_DCON_CH3_UART2 | DMA_CH_VALID,
+		.hw_addr.to	= S3C2410_PA_UART2 + S3C2410_UTXH,
+		.hw_addr.from	= S3C2410_PA_UART2 + S3C2410_URXH,
+	},
+	[DMACH_TIMER] = {
+		.name		= "timer",
+		.channels[0]	= S3C2410_DCON_CH0_TIMER | DMA_CH_VALID,
+		.channels[2]	= S3C2410_DCON_CH2_TIMER | DMA_CH_VALID,
+		.channels[3]	= S3C2410_DCON_CH3_TIMER | DMA_CH_VALID,
+	},
+	[DMACH_I2S_IN] = {
+		.name		= "i2s-sdi",
+		.channels[1]	= S3C2410_DCON_CH1_I2SSDI | DMA_CH_VALID,
+		.channels[2]	= S3C2410_DCON_CH2_I2SSDI | DMA_CH_VALID,
+		.hw_addr.from	= S3C2410_PA_IIS + S3C2410_IISFIFO,
+	},
+	[DMACH_I2S_OUT] = {
+		.name		= "i2s-sdo",
+		.channels[0]	= S3C2440_DCON_CH0_I2SSDO | DMA_CH_VALID,
+		.channels[2]	= S3C2410_DCON_CH2_I2SSDO | DMA_CH_VALID,
+		.hw_addr.to	= S3C2410_PA_IIS + S3C2410_IISFIFO,
+	},
+	[DMACH_PCM_IN] = {
+		.name		= "pcm-in",
+		.channels[0]	= S3C2440_DCON_CH0_PCMIN | DMA_CH_VALID,
+		.channels[2]	= S3C2440_DCON_CH2_PCMIN | DMA_CH_VALID,
+		.hw_addr.from	= S3C2440_PA_AC97 + S3C_AC97_PCM_DATA,
+	},
+	[DMACH_PCM_OUT] = {
+		.name		= "pcm-out",
+		.channels[1]	= S3C2440_DCON_CH1_PCMOUT | DMA_CH_VALID,
+		.channels[3]	= S3C2440_DCON_CH3_PCMOUT | DMA_CH_VALID,
+		.hw_addr.to	= S3C2440_PA_AC97 + S3C_AC97_PCM_DATA,
+	},
+	[DMACH_MIC_IN] = {
+		.name		= "mic-in",
+		.channels[2]	= S3C2440_DCON_CH2_MICIN | DMA_CH_VALID,
+		.channels[3]	= S3C2440_DCON_CH3_MICIN | DMA_CH_VALID,
+		.hw_addr.from	= S3C2440_PA_AC97 + S3C_AC97_MIC_DATA,
+	},
+	[DMACH_USB_EP1] = {
+		.name		= "usb-ep1",
+		.channels[0]	= S3C2410_DCON_CH0_USBEP1 | DMA_CH_VALID,
+	},
+	[DMACH_USB_EP2] = {
+		.name		= "usb-ep2",
+		.channels[1]	= S3C2410_DCON_CH1_USBEP2 | DMA_CH_VALID,
+	},
+	[DMACH_USB_EP3] = {
+		.name		= "usb-ep3",
+		.channels[2]	= S3C2410_DCON_CH2_USBEP3 | DMA_CH_VALID,
+	},
+	[DMACH_USB_EP4] = {
+		.name		= "usb-ep4",
+		.channels[3]	= S3C2410_DCON_CH3_USBEP4 | DMA_CH_VALID,
+	},
+};
+
+static void s3c2440_dma_select(struct s3c2410_dma_chan *chan,
+			       struct s3c24xx_dma_map *map)
+{
+	chan->dcon = map->channels[chan->number] & ~DMA_CH_VALID;
+}
+
+static struct s3c24xx_dma_selection __initdata s3c2440_dma_sel = {
+	.select		= s3c2440_dma_select,
+	.dcon_mask	= 7 << 24,
+	.map		= s3c2440_dma_mappings,
+	.map_size	= ARRAY_SIZE(s3c2440_dma_mappings),
+};
+
+static int s3c2440_dma_add(struct sys_device *sysdev)
+{
+	return s3c24xx_dma_init_map(&s3c2440_dma_sel);
+}
+
+static struct sysdev_driver s3c2440_dma_driver = {
+	.add	= s3c2440_dma_add,
+};
+
+static int __init s3c2440_dma_init(void)
+{
+	return sysdev_driver_register(&s3c2440_sysclass, &s3c2440_dma_driver);
+}
+
+arch_initcall(s3c2440_dma_init);
+
diff --git a/arch/arm/mach-s3c2410/s3c2440-dsc.c b/arch/arm/mach-s3c2410/s3c2440-dsc.c
index 16fa2a3b38fa..c92ea66ba45e 100644
--- a/arch/arm/mach-s3c2410/s3c2440-dsc.c
+++ b/arch/arm/mach-s3c2410/s3c2440-dsc.c
@@ -8,11 +8,6 @@
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
- *
- * Modifications:
- *     29-Aug-2004 BJD  Start of drive-strength control
- *     09-Nov-2004 BJD  Added symbol export
- *     11-Jan-2005 BJD  Include fix
 */
 
 #include <linux/kernel.h>
diff --git a/arch/arm/mach-s3c2410/s3c2440-irq.c b/arch/arm/mach-s3c2410/s3c2440-irq.c
index 1667ba1fa43d..fc08febe2e54 100644
--- a/arch/arm/mach-s3c2410/s3c2440-irq.c
+++ b/arch/arm/mach-s3c2410/s3c2440-irq.c
@@ -119,7 +119,7 @@ static int s3c2440_irq_add(struct sys_device *sysdev)
 }
 
 static struct sysdev_driver s3c2440_irq_driver = {
-	.add	= s3c2440_irq_add,
+	.add		= s3c2440_irq_add,
 };
 
 static int s3c2440_irq_init(void)
diff --git a/arch/arm/mach-s3c2410/s3c244x-irq.c b/arch/arm/mach-s3c2410/s3c244x-irq.c
index 44c5affa9b89..0d13546c3500 100644
--- a/arch/arm/mach-s3c2410/s3c244x-irq.c
+++ b/arch/arm/mach-s3c2410/s3c244x-irq.c
@@ -120,7 +120,9 @@ static int s3c244x_irq_add(struct sys_device *sysdev)
 }
 
 static struct sysdev_driver s3c2440_irq_driver = {
-	.add	= s3c244x_irq_add,
+	.add		= s3c244x_irq_add,
+	.suspend	= s3c24xx_irq_suspend,
+	.resume		= s3c24xx_irq_resume,
 };
 
 static int s3c2440_irq_init(void)
@@ -131,9 +133,12 @@ static int s3c2440_irq_init(void)
 arch_initcall(s3c2440_irq_init);
 
 static struct sysdev_driver s3c2442_irq_driver = {
-	.add	= s3c244x_irq_add,
+	.add		= s3c244x_irq_add,
+	.suspend	= s3c24xx_irq_suspend,
+	.resume		= s3c24xx_irq_resume,
 };
 
+
 static int s3c2442_irq_init(void)
 {
 	return sysdev_driver_register(&s3c2442_sysclass, &s3c2442_irq_driver);
diff --git a/arch/arm/mach-s3c2410/sleep.S b/arch/arm/mach-s3c2410/sleep.S
index a7561a79fc82..2018c2e1dcc5 100644
--- a/arch/arm/mach-s3c2410/sleep.S
+++ b/arch/arm/mach-s3c2410/sleep.S
@@ -41,15 +41,25 @@
 
 	.text
 
-	/* s3c2410_cpu_suspend
+	/* s3c2410_cpu_save
 	 *
-	 * put the cpu into sleep mode
+	 * save enough of the CPU state to allow us to re-start
+	 * pm.c code. as we store items like the sp/lr, we will
+	 * end up returning from this function when the cpu resumes
+	 * so the return value is set to mark this.
+	 *
+	 * This arangement means we avoid having to flush the cache
+	 * from this code.
 	 *
 	 * entry:
-	 *	r0 = sleep save block
+	 *	r0 = pointer to save block
+	 *
+	 * exit:
+	 *	r0 = 0 => we stored everything
+	 *	     1 => resumed from sleep
 	*/
 
-ENTRY(s3c2410_cpu_suspend)
+ENTRY(s3c2410_cpu_save)
 	stmfd	sp!, { r4 - r12, lr }
 
 	@@ store co-processor registers
@@ -62,44 +72,14 @@ ENTRY(s3c2410_cpu_suspend)
 
 	stmia	r0, { r4 - r13 }
 
-	@@ flush the caches to ensure everything is back out to
-	@@ SDRAM before the core powers down
-
-#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
-	bl	arm920_flush_kern_cache_all
-#endif
-
-	@@ prepare cpu to sleep
-
-	ldr	r4, =S3C2410_REFRESH
-	ldr	r5, =S3C24XX_MISCCR
-	ldr	r6, =S3C2410_CLKCON
-	ldr	r7, [ r4 ]		@ get REFRESH (and ensure in TLB)
-	ldr	r8, [ r5 ]		@ get MISCCR (and ensure in TLB)
-	ldr	r9, [ r6 ]		@ get CLKCON (and ensure in TLB)
-
-	orr	r7, r7, #S3C2410_REFRESH_SELF	@ SDRAM sleep command
-	orr	r8, r8, #S3C2410_MISCCR_SDSLEEP @ SDRAM power-down signals
-	orr	r9, r9, #S3C2410_CLKCON_POWER	@ power down command
-
-	teq	pc, #0			@ first as a trial-run to load cache
-	bl	s3c2410_do_sleep
-	teq	r0, r0			@ now do it for real
-	b	s3c2410_do_sleep	@
-
-	@@ align next bit of code to cache line
-	.align	8
-s3c2410_do_sleep:
-	streq	r7, [ r4 ]			@ SDRAM sleep command
-	streq	r8, [ r5 ]			@ SDRAM power-down config
-	streq	r9, [ r6 ]			@ CPU sleep
-1:	beq	1b
-	mov	pc, r14
+	mov	r0, #0
+	ldmfd	sp, { r4 - r12, pc }
 
 	@@ return to the caller, after having the MMU
 	@@ turned on, this restores the last bits from the
 	@@ stack
 resume_with_mmu:
+	mov	r0, #1
 	ldmfd	sp!, { r4 - r12, pc }
 
 	.ltorg
diff --git a/arch/arm/mach-s3c2410/usb-simtec.c b/arch/arm/mach-s3c2410/usb-simtec.c
index 6b22d8f0a00d..c635efa7cd31 100644
--- a/arch/arm/mach-s3c2410/usb-simtec.c
+++ b/arch/arm/mach-s3c2410/usb-simtec.c
@@ -10,12 +10,6 @@
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
- *
- * Modifications:
- *	14-Sep-2004 BJD  Created
- *	18-Oct-2004 BJD  Cleanups, and added code to report OC cleared
- *	09-Aug-2005 BJD  Renamed s3c2410_report_oc to s3c2410_usb_report_oc
- *	09-Aug-2005 BJD  Ports powered only if both are enabled
 */
 
 #define DEBUG
diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c
index a0dfa390e34b..6496eb645cee 100644
--- a/arch/arm/mach-sa1100/collie.c
+++ b/arch/arm/mach-sa1100/collie.c
@@ -91,30 +91,29 @@ static struct mcp_plat_data collie_mcp_data = {
 /*
  * low-level UART features.
  */
-static struct locomo_dev *uart_dev = NULL;
+struct platform_device collie_locomo_device;
 
 static void collie_uart_set_mctrl(struct uart_port *port, u_int mctrl)
 {
- 	if (!uart_dev) return;
-
  	if (mctrl & TIOCM_RTS)
-		locomo_gpio_write(uart_dev, LOCOMO_GPIO_RTS, 0);
+		locomo_gpio_write(&collie_locomo_device.dev, LOCOMO_GPIO_RTS, 0);
  	else
-		locomo_gpio_write(uart_dev, LOCOMO_GPIO_RTS, 1);
+		locomo_gpio_write(&collie_locomo_device.dev, LOCOMO_GPIO_RTS, 1);
 
  	if (mctrl & TIOCM_DTR)
-		locomo_gpio_write(uart_dev, LOCOMO_GPIO_DTR, 0);
+		locomo_gpio_write(&collie_locomo_device.dev, LOCOMO_GPIO_DTR, 0);
  	else
-		locomo_gpio_write(uart_dev, LOCOMO_GPIO_DTR, 1);
+		locomo_gpio_write(&collie_locomo_device.dev, LOCOMO_GPIO_DTR, 1);
 }
 
 static u_int collie_uart_get_mctrl(struct uart_port *port)
 {
 	int ret = TIOCM_CD;
 	unsigned int r;
-	if (!uart_dev) return ret;
 
-	r = locomo_gpio_read_output(uart_dev, LOCOMO_GPIO_CTS & LOCOMO_GPIO_DSR);
+	r = locomo_gpio_read_output(&collie_locomo_device.dev, LOCOMO_GPIO_CTS & LOCOMO_GPIO_DSR);
+	if (r == -ENODEV)
+		return ret;
 	if (r & LOCOMO_GPIO_CTS)
 		ret |= TIOCM_CTS;
 	if (r & LOCOMO_GPIO_DSR)
@@ -130,13 +129,11 @@ static struct sa1100_port_fns collie_port_fns __initdata = {
 
 static int collie_uart_probe(struct locomo_dev *dev)
 {
-	uart_dev = dev;
 	return 0;
 }
 
 static int collie_uart_remove(struct locomo_dev *dev)
 {
-	uart_dev = NULL;
 	return 0;
 }
 
@@ -170,7 +167,7 @@ static struct resource locomo_resources[] = {
 	},
 };
 
-static struct platform_device locomo_device = {
+struct platform_device collie_locomo_device = {
 	.name		= "locomo",
 	.id		= 0,
 	.num_resources	= ARRAY_SIZE(locomo_resources),
@@ -178,7 +175,7 @@ static struct platform_device locomo_device = {
 };
 
 static struct platform_device *devices[] __initdata = {
-	&locomo_device,
+	&collie_locomo_device,
 	&colliescoop_device,
 };
 
diff --git a/arch/arm/mach-versatile/pci.c b/arch/arm/mach-versatile/pci.c
index 41b370090b60..13bbd08ff841 100644
--- a/arch/arm/mach-versatile/pci.c
+++ b/arch/arm/mach-versatile/pci.c
@@ -117,7 +117,6 @@ static int versatile_read_config(struct pci_bus *bus, unsigned int devfn, int wh
 	} else {
 		switch (size) {
 		case 1:
-			addr &= ~3;
 			v = __raw_readb(addr);
 			break;
 
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index b4f220dd5eb8..c0bfb8212b77 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -15,6 +15,7 @@ config CPU_ARM610
 	select CPU_32v3
 	select CPU_CACHE_V3
 	select CPU_CACHE_VIVT
+	select CPU_CP15_MMU
 	select CPU_COPY_V3 if MMU
 	select CPU_TLB_V3 if MMU
 	help
@@ -24,6 +25,20 @@ config CPU_ARM610
 	  Say Y if you want support for the ARM610 processor.
 	  Otherwise, say N.
 
+# ARM7TDMI
+config CPU_ARM7TDMI
+	bool "Support ARM7TDMI processor"
+	depends on !MMU
+	select CPU_32v4T
+	select CPU_ABRT_LV4T
+	select CPU_CACHE_V4
+	help
+	  A 32-bit RISC microprocessor based on the ARM7 processor core
+	  which has no memory control unit and cache.
+
+	  Say Y if you want support for the ARM7TDMI processor.
+	  Otherwise, say N.
+
 # ARM710
 config CPU_ARM710
 	bool "Support ARM710 processor" if !ARCH_CLPS7500 && ARCH_RPC
@@ -31,6 +46,7 @@ config CPU_ARM710
 	select CPU_32v3
 	select CPU_CACHE_V3
 	select CPU_CACHE_VIVT
+	select CPU_CP15_MMU
 	select CPU_COPY_V3 if MMU
 	select CPU_TLB_V3 if MMU
 	help
@@ -50,6 +66,7 @@ config CPU_ARM720T
 	select CPU_ABRT_LV4T
 	select CPU_CACHE_V4
 	select CPU_CACHE_VIVT
+	select CPU_CP15_MMU
 	select CPU_COPY_V4WT if MMU
 	select CPU_TLB_V4WT if MMU
 	help
@@ -59,6 +76,36 @@ config CPU_ARM720T
 	  Say Y if you want support for the ARM720T processor.
 	  Otherwise, say N.
 
+# ARM740T
+config CPU_ARM740T
+	bool "Support ARM740T processor" if ARCH_INTEGRATOR
+	depends on !MMU
+	select CPU_32v4T
+	select CPU_ABRT_LV4T
+	select CPU_CACHE_V3	# although the core is v4t
+	select CPU_CP15_MPU
+	help
+	  A 32-bit RISC processor with 8KB cache or 4KB variants,
+	  write buffer and MPU(Protection Unit) built around
+	  an ARM7TDMI core.
+
+	  Say Y if you want support for the ARM740T processor.
+	  Otherwise, say N.
+
+# ARM9TDMI
+config CPU_ARM9TDMI
+	bool "Support ARM9TDMI processor"
+	depends on !MMU
+	select CPU_32v4T
+	select CPU_ABRT_NOMMU
+	select CPU_CACHE_V4
+	help
+	  A 32-bit RISC microprocessor based on the ARM9 processor core
+	  which has no memory control unit and cache.
+
+	  Say Y if you want support for the ARM9TDMI processor.
+	  Otherwise, say N.
+
 # ARM920T
 config CPU_ARM920T
 	bool "Support ARM920T processor"
@@ -68,6 +115,7 @@ config CPU_ARM920T
 	select CPU_ABRT_EV4T
 	select CPU_CACHE_V4WT
 	select CPU_CACHE_VIVT
+	select CPU_CP15_MMU
 	select CPU_COPY_V4WB if MMU
 	select CPU_TLB_V4WBI if MMU
 	help
@@ -89,6 +137,7 @@ config CPU_ARM922T
 	select CPU_ABRT_EV4T
 	select CPU_CACHE_V4WT
 	select CPU_CACHE_VIVT
+	select CPU_CP15_MMU
 	select CPU_COPY_V4WB if MMU
 	select CPU_TLB_V4WBI if MMU
 	help
@@ -108,6 +157,7 @@ config CPU_ARM925T
 	select CPU_ABRT_EV4T
 	select CPU_CACHE_V4WT
 	select CPU_CACHE_VIVT
+	select CPU_CP15_MMU
 	select CPU_COPY_V4WB if MMU
 	select CPU_TLB_V4WBI if MMU
  	help
@@ -126,6 +176,7 @@ config CPU_ARM926T
 	select CPU_32v5
 	select CPU_ABRT_EV5TJ
 	select CPU_CACHE_VIVT
+	select CPU_CP15_MMU
 	select CPU_COPY_V4WB if MMU
 	select CPU_TLB_V4WBI if MMU
 	help
@@ -136,6 +187,39 @@ config CPU_ARM926T
 	  Say Y if you want support for the ARM926T processor.
 	  Otherwise, say N.
 
+# ARM940T
+config CPU_ARM940T
+	bool "Support ARM940T processor" if ARCH_INTEGRATOR
+	depends on !MMU
+	select CPU_32v4T
+	select CPU_ABRT_NOMMU
+	select CPU_CACHE_VIVT
+	select CPU_CP15_MPU
+	help
+	  ARM940T is a member of the ARM9TDMI family of general-
+	  purpose microprocessors with MPU and seperate 4KB
+	  instruction and 4KB data cases, each with a 4-word line
+	  length.
+
+	  Say Y if you want support for the ARM940T processor.
+	  Otherwise, say N.
+
+# ARM946E-S
+config CPU_ARM946E
+	bool "Support ARM946E-S processor" if ARCH_INTEGRATOR
+	depends on !MMU
+	select CPU_32v5
+	select CPU_ABRT_NOMMU
+	select CPU_CACHE_VIVT
+	select CPU_CP15_MPU
+	help
+	  ARM946E-S is a member of the ARM9E-S family of high-
+	  performance, 32-bit system-on-chip processor solutions.
+	  The TCM and ARMv5TE 32-bit instruction set is supported.
+
+	  Say Y if you want support for the ARM946E-S processor.
+	  Otherwise, say N.
+
 # ARM1020 - needs validating
 config CPU_ARM1020
 	bool "Support ARM1020T (rev 0) processor"
@@ -144,6 +228,7 @@ config CPU_ARM1020
 	select CPU_ABRT_EV4T
 	select CPU_CACHE_V4WT
 	select CPU_CACHE_VIVT
+	select CPU_CP15_MMU
 	select CPU_COPY_V4WB if MMU
 	select CPU_TLB_V4WBI if MMU
 	help
@@ -161,6 +246,7 @@ config CPU_ARM1020E
 	select CPU_ABRT_EV4T
 	select CPU_CACHE_V4WT
 	select CPU_CACHE_VIVT
+	select CPU_CP15_MMU
 	select CPU_COPY_V4WB if MMU
 	select CPU_TLB_V4WBI if MMU
 	depends on n
@@ -172,6 +258,7 @@ config CPU_ARM1022
 	select CPU_32v5
 	select CPU_ABRT_EV4T
 	select CPU_CACHE_VIVT
+	select CPU_CP15_MMU
 	select CPU_COPY_V4WB if MMU # can probably do better
 	select CPU_TLB_V4WBI if MMU
 	help
@@ -189,6 +276,7 @@ config CPU_ARM1026
 	select CPU_32v5
 	select CPU_ABRT_EV5T # But need Jazelle, but EV5TJ ignores bit 10
 	select CPU_CACHE_VIVT
+	select CPU_CP15_MMU
 	select CPU_COPY_V4WB if MMU # can probably do better
 	select CPU_TLB_V4WBI if MMU
 	help
@@ -207,6 +295,7 @@ config CPU_SA110
 	select CPU_ABRT_EV4
 	select CPU_CACHE_V4WB
 	select CPU_CACHE_VIVT
+	select CPU_CP15_MMU
 	select CPU_COPY_V4WB if MMU
 	select CPU_TLB_V4WB if MMU
 	help
@@ -227,16 +316,18 @@ config CPU_SA1100
 	select CPU_ABRT_EV4
 	select CPU_CACHE_V4WB
 	select CPU_CACHE_VIVT
+	select CPU_CP15_MMU
 	select CPU_TLB_V4WB if MMU
 
 # XScale
 config CPU_XSCALE
 	bool
-	depends on ARCH_IOP3XX || ARCH_PXA || ARCH_IXP4XX || ARCH_IXP2000
+	depends on ARCH_IOP32X || ARCH_IOP33X || ARCH_PXA || ARCH_IXP4XX || ARCH_IXP2000
 	default y
 	select CPU_32v5
 	select CPU_ABRT_EV5T
 	select CPU_CACHE_VIVT
+	select CPU_CP15_MMU
 	select CPU_TLB_V4WBI if MMU
 
 # XScale Core Version 3
@@ -247,6 +338,7 @@ config CPU_XSC3
 	select CPU_32v5
 	select CPU_ABRT_EV5T
 	select CPU_CACHE_VIVT
+	select CPU_CP15_MMU
 	select CPU_TLB_V4WBI if MMU
 	select IO_36
 
@@ -258,6 +350,7 @@ config CPU_V6
 	select CPU_ABRT_EV6
 	select CPU_CACHE_V6
 	select CPU_CACHE_VIPT
+	select CPU_CP15_MMU
 	select CPU_COPY_V6 if MMU
 	select CPU_TLB_V6 if MMU
 
@@ -299,6 +392,9 @@ config CPU_32v6
 	bool
 
 # The abort model
+config CPU_ABRT_NOMMU
+	bool
+
 config CPU_ABRT_EV4
 	bool
 
@@ -380,6 +476,23 @@ config CPU_TLB_V6
 
 endif
 
+config CPU_CP15
+	bool
+	help
+	  Processor has the CP15 register.
+
+config CPU_CP15_MMU
+	bool
+	select CPU_CP15
+	help
+	  Processor has the CP15 register, which has MMU related registers.
+
+config CPU_CP15_MPU
+	bool
+	select CPU_CP15
+	help
+	  Processor has the CP15 register, which has MPU related registers.
+
 #
 # CPU supports 36-bit I/O
 #
@@ -390,7 +503,7 @@ comment "Processor Features"
 
 config ARM_THUMB
 	bool "Support Thumb user binaries"
-	depends on CPU_ARM720T || CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM1020 || CPU_ARM1020E || CPU_ARM1022 || CPU_ARM1026 || CPU_XSCALE || CPU_XSC3 || CPU_V6
+	depends on CPU_ARM720T || CPU_ARM740T || CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM940T || CPU_ARM946E || CPU_ARM1020 || CPU_ARM1020E || CPU_ARM1022 || CPU_ARM1026 || CPU_XSCALE || CPU_XSC3 || CPU_V6
 	default y
 	help
 	  Say Y if you want to include kernel support for running user space
@@ -411,23 +524,48 @@ config CPU_BIG_ENDIAN
 	  port must properly enable any big-endian related features
 	  of your chipset/board/processor.
 
+config CPU_HIGH_VECTOR
+	depends !MMU && CPU_CP15 && !CPU_ARM740T
+	bool "Select the High exception vector"
+	default n
+	help
+	  Say Y here to select high exception vector(0xFFFF0000~).
+	  The exception vector can be vary depending on the platform
+	  design in nommu mode. If your platform needs to select
+	  high exception vector, say Y.
+	  Otherwise or if you are unsure, say N, and the low exception
+	  vector (0x00000000~) will be used.
+
 config CPU_ICACHE_DISABLE
-	bool "Disable I-Cache"
-	depends on CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM1020 || CPU_V6
+	bool "Disable I-Cache (I-bit)"
+	depends on CPU_CP15 && !(CPU_ARM610 || CPU_ARM710 || CPU_ARM720T || CPU_ARM740T || CPU_XSCALE || CPU_XSC3)
 	help
 	  Say Y here to disable the processor instruction cache. Unless
 	  you have a reason not to or are unsure, say N.
 
 config CPU_DCACHE_DISABLE
-	bool "Disable D-Cache"
-	depends on CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM1020 || CPU_V6
+	bool "Disable D-Cache (C-bit)"
+	depends on CPU_CP15
 	help
 	  Say Y here to disable the processor data cache. Unless
 	  you have a reason not to or are unsure, say N.
 
+config CPU_DCACHE_SIZE
+	hex
+	depends on CPU_ARM740T || CPU_ARM946E
+	default 0x00001000 if CPU_ARM740T
+	default 0x00002000 # default size for ARM946E-S
+	help
+	  Some cores are synthesizable to have various sized cache. For
+	  ARM946E-S case, it can vary from 0KB to 1MB.
+	  To support such cache operations, it is efficient to know the size
+	  before compile time.
+	  If your SoC is configured to have a different size, define the value
+	  here with proper conditions.
+
 config CPU_DCACHE_WRITETHROUGH
 	bool "Force write through D-cache"
-	depends on (CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM1020 || CPU_V6) && !CPU_DCACHE_DISABLE
+	depends on (CPU_ARM740T || CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM940T || CPU_ARM946E || CPU_ARM1020 || CPU_V6) && !CPU_DCACHE_DISABLE
 	default y if CPU_ARM925T
 	help
 	  Say Y here to use the data cache in writethrough mode. Unless you
@@ -435,7 +573,7 @@ config CPU_DCACHE_WRITETHROUGH
 
 config CPU_CACHE_ROUND_ROBIN
 	bool "Round robin I and D cache replacement algorithm"
-	depends on (CPU_ARM926T || CPU_ARM1020) && (!CPU_ICACHE_DISABLE || !CPU_DCACHE_DISABLE)
+	depends on (CPU_ARM926T || CPU_ARM946E || CPU_ARM1020) && (!CPU_ICACHE_DISABLE || !CPU_DCACHE_DISABLE)
 	help
 	  Say Y here to use the predictable round-robin cache replacement
 	  policy.  Unless you specifically require this or are unsure, say N.
diff --git a/arch/arm/mm/Makefile b/arch/arm/mm/Makefile
index 21a2770226ee..d2f5672ecf62 100644
--- a/arch/arm/mm/Makefile
+++ b/arch/arm/mm/Makefile
@@ -6,7 +6,7 @@ obj-y				:= consistent.o extable.o fault.o init.o \
 				   iomap.o
 
 obj-$(CONFIG_MMU)		+= fault-armv.o flush.o ioremap.o mmap.o \
-				   mm-armv.o
+				   pgd.o mmu.o
 
 ifneq ($(CONFIG_MMU),y)
 obj-y				+= nommu.o
@@ -17,6 +17,7 @@ obj-$(CONFIG_MODULES)		+= proc-syms.o
 obj-$(CONFIG_ALIGNMENT_TRAP)	+= alignment.o
 obj-$(CONFIG_DISCONTIGMEM)	+= discontig.o
 
+obj-$(CONFIG_CPU_ABRT_NOMMU)	+= abort-nommu.o
 obj-$(CONFIG_CPU_ABRT_EV4)	+= abort-ev4.o
 obj-$(CONFIG_CPU_ABRT_EV4T)	+= abort-ev4t.o
 obj-$(CONFIG_CPU_ABRT_LV4T)	+= abort-lv4t.o
@@ -33,7 +34,7 @@ obj-$(CONFIG_CPU_CACHE_V6)	+= cache-v6.o
 obj-$(CONFIG_CPU_COPY_V3)	+= copypage-v3.o
 obj-$(CONFIG_CPU_COPY_V4WT)	+= copypage-v4wt.o
 obj-$(CONFIG_CPU_COPY_V4WB)	+= copypage-v4wb.o
-obj-$(CONFIG_CPU_COPY_V6)	+= copypage-v6.o mmu.o
+obj-$(CONFIG_CPU_COPY_V6)	+= copypage-v6.o context.o
 obj-$(CONFIG_CPU_SA1100)	+= copypage-v4mc.o
 obj-$(CONFIG_CPU_XSCALE)	+= copypage-xscale.o
 obj-$(CONFIG_CPU_XSC3)		+= copypage-xsc3.o
@@ -46,11 +47,16 @@ obj-$(CONFIG_CPU_TLB_V6)	+= tlb-v6.o
 
 obj-$(CONFIG_CPU_ARM610)	+= proc-arm6_7.o
 obj-$(CONFIG_CPU_ARM710)	+= proc-arm6_7.o
+obj-$(CONFIG_CPU_ARM7TDMI)	+= proc-arm7tdmi.o
 obj-$(CONFIG_CPU_ARM720T)	+= proc-arm720.o
+obj-$(CONFIG_CPU_ARM740T)	+= proc-arm740.o
+obj-$(CONFIG_CPU_ARM9TDMI)	+= proc-arm9tdmi.o
 obj-$(CONFIG_CPU_ARM920T)	+= proc-arm920.o
 obj-$(CONFIG_CPU_ARM922T)	+= proc-arm922.o
 obj-$(CONFIG_CPU_ARM925T)	+= proc-arm925.o
 obj-$(CONFIG_CPU_ARM926T)	+= proc-arm926.o
+obj-$(CONFIG_CPU_ARM940T)	+= proc-arm940.o
+obj-$(CONFIG_CPU_ARM946E)	+= proc-arm946.o
 obj-$(CONFIG_CPU_ARM1020)	+= proc-arm1020.o
 obj-$(CONFIG_CPU_ARM1020E)	+= proc-arm1020e.o
 obj-$(CONFIG_CPU_ARM1022)	+= proc-arm1022.o
diff --git a/arch/arm/mm/abort-lv4t.S b/arch/arm/mm/abort-lv4t.S
index db743e510214..9fb7b0e25ea1 100644
--- a/arch/arm/mm/abort-lv4t.S
+++ b/arch/arm/mm/abort-lv4t.S
@@ -19,11 +19,16 @@
  */
 ENTRY(v4t_late_abort)
 	tst	r3, #PSR_T_BIT			@ check for thumb mode
+#ifdef CONFIG_CPU_CP15_MMU
 	mrc	p15, 0, r1, c5, c0, 0		@ get FSR
 	mrc	p15, 0, r0, c6, c0, 0		@ get FAR
+	bic	r1, r1, #1 << 11 | 1 << 10	@ clear bits 11 and 10 of FSR
+#else
+	mov	r0, #0				@ clear r0, r1 (no FSR/FAR)
+	mov	r1, #0
+#endif
 	bne	.data_thumb_abort
 	ldr	r8, [r2]			@ read arm instruction
-	bic	r1, r1, #1 << 11 | 1 << 10	@ clear bits 11 and 10 of FSR
 	tst	r8, #1 << 20			@ L = 1 -> write?
 	orreq	r1, r1, #1 << 11		@ yes.
 	and	r7, r8, #15 << 24
diff --git a/arch/arm/mm/abort-nommu.S b/arch/arm/mm/abort-nommu.S
new file mode 100644
index 000000000000..a7cc7f9ee45d
--- /dev/null
+++ b/arch/arm/mm/abort-nommu.S
@@ -0,0 +1,19 @@
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+/*
+ * Function: nommu_early_abort
+ *
+ * Params  : r2 = address of aborted instruction
+ *         : r3 = saved SPSR
+ *
+ * Returns : r0 = 0 (abort address)
+ *	   : r1 = 0 (FSR)
+ *
+ * Note: There is no FSR/FAR on !CPU_CP15_MMU cores.
+ *       Just fill zero into the registers.
+ */
+	.align	5
+ENTRY(nommu_early_abort)
+	mov	r0, #0				@ clear r0, r1 (no FSR/FAR)
+	mov	r1, #0
+	mov	pc, lr
diff --git a/arch/arm/mm/alignment.c b/arch/arm/mm/alignment.c
index e0d21bbbe7d7..aa109f074dd9 100644
--- a/arch/arm/mm/alignment.c
+++ b/arch/arm/mm/alignment.c
@@ -735,7 +735,7 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 	/*
 	 * We got a fault - fix it up, or die.
 	 */
-	do_bad_area(current, current->mm, addr, fsr, regs);
+	do_bad_area(addr, fsr, regs);
 	return 0;
 
  swp:
diff --git a/arch/arm/mm/cache-v4.S b/arch/arm/mm/cache-v4.S
index b8ad5d58ebe2..b2908063ed6a 100644
--- a/arch/arm/mm/cache-v4.S
+++ b/arch/arm/mm/cache-v4.S
@@ -29,9 +29,13 @@ ENTRY(v4_flush_user_cache_all)
  *	Clean and invalidate the entire cache.
  */
 ENTRY(v4_flush_kern_cache_all)
+#ifdef CPU_CP15
 	mov	r0, #0
 	mcr	p15, 0, r0, c7, c7, 0		@ flush ID cache
 	mov	pc, lr
+#else
+	/* FALLTHROUGH */
+#endif
 
 /*
  *	flush_user_cache_range(start, end, flags)
@@ -44,9 +48,13 @@ ENTRY(v4_flush_kern_cache_all)
  *	- flags	- vma_area_struct flags describing address space
  */
 ENTRY(v4_flush_user_cache_range)
+#ifdef CPU_CP15
 	mov	ip, #0
 	mcreq	p15, 0, ip, c7, c7, 0		@ flush ID cache
 	mov	pc, lr
+#else
+	/* FALLTHROUGH */
+#endif
 
 /*
  *	coherent_kern_range(start, end)
@@ -108,8 +116,10 @@ ENTRY(v4_dma_inv_range)
  *	- end	 - virtual end address
  */
 ENTRY(v4_dma_flush_range)
+#ifdef CPU_CP15
 	mov	r0, #0
 	mcr	p15, 0, r0, c7, c7, 0		@ flush ID cache
+#endif
 	/* FALLTHROUGH */
 
 /*
diff --git a/arch/arm/mm/context.c b/arch/arm/mm/context.c
new file mode 100644
index 000000000000..79e800202424
--- /dev/null
+++ b/arch/arm/mm/context.c
@@ -0,0 +1,45 @@
+/*
+ *  linux/arch/arm/mm/context.c
+ *
+ *  Copyright (C) 2002-2003 Deep Blue Solutions Ltd, all rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/mm.h>
+
+#include <asm/mmu_context.h>
+#include <asm/tlbflush.h>
+
+unsigned int cpu_last_asid = { 1 << ASID_BITS };
+
+/*
+ * We fork()ed a process, and we need a new context for the child
+ * to run in.  We reserve version 0 for initial tasks so we will
+ * always allocate an ASID.
+ */
+void __init_new_context(struct task_struct *tsk, struct mm_struct *mm)
+{
+	mm->context.id = 0;
+}
+
+void __new_context(struct mm_struct *mm)
+{
+	unsigned int asid;
+
+	asid = ++cpu_last_asid;
+	if (asid == 0)
+		asid = cpu_last_asid = 1 << ASID_BITS;
+
+	/*
+	 * If we've used up all our ASIDs, we need
+	 * to start a new version and flush the TLB.
+	 */
+	if ((asid & ~ASID_MASK) == 0)
+		flush_tlb_all();
+
+	mm->context.id = asid;
+}
diff --git a/arch/arm/mm/copypage-v4mc.c b/arch/arm/mm/copypage-v4mc.c
index fc69dccdace1..df1645e14b4c 100644
--- a/arch/arm/mm/copypage-v4mc.c
+++ b/arch/arm/mm/copypage-v4mc.c
@@ -20,6 +20,8 @@
 #include <asm/pgtable.h>
 #include <asm/tlbflush.h>
 
+#include "mm.h"
+
 /*
  * 0xffff8000 to 0xffffffff is reserved for any ARM architecture
  * specific hacks for copying pages efficiently.
@@ -27,8 +29,6 @@
 #define minicache_pgprot __pgprot(L_PTE_PRESENT | L_PTE_YOUNG | \
 				  L_PTE_CACHEABLE)
 
-#define TOP_PTE(x)	pte_offset_kernel(top_pmd, x)
-
 static DEFINE_SPINLOCK(minicache_lock);
 
 /*
diff --git a/arch/arm/mm/copypage-v6.c b/arch/arm/mm/copypage-v6.c
index 269ce6913ee9..3d0d3a963d20 100644
--- a/arch/arm/mm/copypage-v6.c
+++ b/arch/arm/mm/copypage-v6.c
@@ -17,6 +17,8 @@
 #include <asm/tlbflush.h>
 #include <asm/cacheflush.h>
 
+#include "mm.h"
+
 #if SHMLBA > 16384
 #error FIX ME
 #endif
@@ -24,8 +26,6 @@
 #define from_address	(0xffff8000)
 #define to_address	(0xffffc000)
 
-#define TOP_PTE(x)	pte_offset_kernel(top_pmd, x)
-
 static DEFINE_SPINLOCK(v6_lock);
 
 /*
diff --git a/arch/arm/mm/copypage-xscale.c b/arch/arm/mm/copypage-xscale.c
index 42a6ee255ce0..84ebe0aa379e 100644
--- a/arch/arm/mm/copypage-xscale.c
+++ b/arch/arm/mm/copypage-xscale.c
@@ -20,6 +20,8 @@
 #include <asm/pgtable.h>
 #include <asm/tlbflush.h>
 
+#include "mm.h"
+
 /*
  * 0xffff8000 to 0xffffffff is reserved for any ARM architecture
  * specific hacks for copying pages efficiently.
@@ -29,8 +31,6 @@
 #define minicache_pgprot __pgprot(L_PTE_PRESENT | L_PTE_YOUNG | \
 				  L_PTE_CACHEABLE)
 
-#define TOP_PTE(x)	pte_offset_kernel(top_pmd, x)
-
 static DEFINE_SPINLOCK(minicache_lock);
 
 /*
diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c
index c5e0622c7765..f0943d160ffe 100644
--- a/arch/arm/mm/fault.c
+++ b/arch/arm/mm/fault.c
@@ -131,10 +131,11 @@ __do_user_fault(struct task_struct *tsk, unsigned long addr,
 	force_sig_info(sig, &si, tsk);
 }
 
-void
-do_bad_area(struct task_struct *tsk, struct mm_struct *mm, unsigned long addr,
-	    unsigned int fsr, struct pt_regs *regs)
+void do_bad_area(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 {
+	struct task_struct *tsk = current;
+	struct mm_struct *mm = tsk->active_mm;
+
 	/*
 	 * If we are in kernel mode at this point, we
 	 * have no context to handle this fault with.
@@ -319,7 +320,6 @@ static int
 do_translation_fault(unsigned long addr, unsigned int fsr,
 		     struct pt_regs *regs)
 {
-	struct task_struct *tsk;
 	unsigned int index;
 	pgd_t *pgd, *pgd_k;
 	pmd_t *pmd, *pmd_k;
@@ -351,9 +351,7 @@ do_translation_fault(unsigned long addr, unsigned int fsr,
 	return 0;
 
 bad_area:
-	tsk = current;
-
-	do_bad_area(tsk, tsk->active_mm, addr, fsr, regs);
+	do_bad_area(addr, fsr, regs);
 	return 0;
 }
 
@@ -364,8 +362,7 @@ bad_area:
 static int
 do_sect_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 {
-	struct task_struct *tsk = current;
-	do_bad_area(tsk, tsk->active_mm, addr, fsr, regs);
+	do_bad_area(addr, fsr, regs);
 	return 0;
 }
 
diff --git a/arch/arm/mm/fault.h b/arch/arm/mm/fault.h
index 73b59e83227f..49e9e3804de4 100644
--- a/arch/arm/mm/fault.h
+++ b/arch/arm/mm/fault.h
@@ -1,6 +1,3 @@
-void do_bad_area(struct task_struct *tsk, struct mm_struct *mm,
-		 unsigned long addr, unsigned int fsr, struct pt_regs *regs);
-
-void show_pte(struct mm_struct *mm, unsigned long addr);
+void do_bad_area(unsigned long addr, unsigned int fsr, struct pt_regs *regs);
 
 unsigned long search_exception_table(unsigned long addr);
diff --git a/arch/arm/mm/flush.c b/arch/arm/mm/flush.c
index d438ce41cdd5..454205b789d5 100644
--- a/arch/arm/mm/flush.c
+++ b/arch/arm/mm/flush.c
@@ -15,12 +15,12 @@
 #include <asm/system.h>
 #include <asm/tlbflush.h>
 
+#include "mm.h"
+
 #ifdef CONFIG_CPU_CACHE_VIPT
 
 #define ALIAS_FLUSH_START	0xffff4000
 
-#define TOP_PTE(x)	pte_offset_kernel(top_pmd, x)
-
 static void flush_pfn_alias(unsigned long pfn, unsigned long vaddr)
 {
 	unsigned long to = ALIAS_FLUSH_START + (CACHE_COLOUR(vaddr) << PAGE_SHIFT);
@@ -107,7 +107,7 @@ void flush_ptrace_access(struct vm_area_struct *vma, struct page *page,
 
 	/* VIPT non-aliasing cache */
 	if (cpu_isset(smp_processor_id(), vma->vm_mm->cpu_vm_mask) &&
-	    vma->vm_flags | VM_EXEC) {
+	    vma->vm_flags & VM_EXEC) {
 		unsigned long addr = (unsigned long)kaddr;
 		/* only flushing the kernel mapping on non-aliasing VIPT */
 		__cpuc_coherent_kern_range(addr, addr + len);
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index fe3f7f625008..22217fe2650b 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -25,10 +25,9 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
+#include "mm.h"
 
-extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
-extern void _stext, _text, _etext, __data_start, _end, __init_begin, __init_end;
+extern void _text, _etext, __data_start, _end, __init_begin, __init_end;
 extern unsigned long phys_initrd_start;
 extern unsigned long phys_initrd_size;
 
@@ -38,12 +37,6 @@ extern unsigned long phys_initrd_size;
  */
 static struct meminfo meminfo __initdata = { 0, };
 
-/*
- * empty_zero_page is a special page that is used for
- * zero-initialized data and COW.
- */
-struct page *empty_zero_page;
-
 void show_mem(void)
 {
 	int free = 0, total = 0, reserved = 0;
@@ -83,16 +76,6 @@ void show_mem(void)
 	printk("%d pages swap cached\n", cached);
 }
 
-static inline pmd_t *pmd_off(pgd_t *pgd, unsigned long virt)
-{
-	return pmd_offset(pgd, virt);
-}
-
-static inline pmd_t *pmd_off_k(unsigned long virt)
-{
-	return pmd_off(pgd_offset_k(virt), virt);
-}
-
 #define for_each_nodebank(iter,mi,no)			\
 	for (iter = 0; iter < mi->nr_banks; iter++)	\
 		if (mi->bank[iter].node == no)
@@ -176,62 +159,20 @@ static int __init check_initrd(struct meminfo *mi)
 	return initrd_node;
 }
 
-/*
- * Reserve the various regions of node 0
- */
-static __init void reserve_node_zero(pg_data_t *pgdat)
+static inline void map_memory_bank(struct membank *bank)
 {
-	unsigned long res_size = 0;
-
-	/*
-	 * Register the kernel text and data with bootmem.
-	 * Note that this can only be in node 0.
-	 */
-#ifdef CONFIG_XIP_KERNEL
-	reserve_bootmem_node(pgdat, __pa(&__data_start), &_end - &__data_start);
-#else
-	reserve_bootmem_node(pgdat, __pa(&_stext), &_end - &_stext);
-#endif
-
-	/*
-	 * Reserve the page tables.  These are already in use,
-	 * and can only be in node 0.
-	 */
-	reserve_bootmem_node(pgdat, __pa(swapper_pg_dir),
-			     PTRS_PER_PGD * sizeof(pgd_t));
-
-	/*
-	 * Hmm... This should go elsewhere, but we really really need to
-	 * stop things allocating the low memory; ideally we need a better
-	 * implementation of GFP_DMA which does not assume that DMA-able
-	 * memory starts at zero.
-	 */
-	if (machine_is_integrator() || machine_is_cintegrator())
-		res_size = __pa(swapper_pg_dir) - PHYS_OFFSET;
+#ifdef CONFIG_MMU
+	struct map_desc map;
 
-	/*
-	 * These should likewise go elsewhere.  They pre-reserve the
-	 * screen memory region at the start of main system memory.
-	 */
-	if (machine_is_edb7211())
-		res_size = 0x00020000;
-	if (machine_is_p720t())
-		res_size = 0x00014000;
+	map.pfn = __phys_to_pfn(bank->start);
+	map.virtual = __phys_to_virt(bank->start);
+	map.length = bank->size;
+	map.type = MT_MEMORY;
 
-#ifdef CONFIG_SA1111
-	/*
-	 * Because of the SA1111 DMA bug, we want to preserve our
-	 * precious DMA-able memory...
-	 */
-	res_size = __pa(swapper_pg_dir) - PHYS_OFFSET;
+	create_mapping(&map);
 #endif
-	if (res_size)
-		reserve_bootmem_node(pgdat, PHYS_OFFSET, res_size);
 }
 
-void __init build_mem_type_table(void);
-void __init create_mapping(struct map_desc *md);
-
 static unsigned long __init
 bootmem_init_node(int node, int initrd_node, struct meminfo *mi)
 {
@@ -248,23 +189,18 @@ bootmem_init_node(int node, int initrd_node, struct meminfo *mi)
 	 * Calculate the pfn range, and map the memory banks for this node.
 	 */
 	for_each_nodebank(i, mi, node) {
+		struct membank *bank = &mi->bank[i];
 		unsigned long start, end;
-		struct map_desc map;
 
-		start = mi->bank[i].start >> PAGE_SHIFT;
-		end = (mi->bank[i].start + mi->bank[i].size) >> PAGE_SHIFT;
+		start = bank->start >> PAGE_SHIFT;
+		end = (bank->start + bank->size) >> PAGE_SHIFT;
 
 		if (start_pfn > start)
 			start_pfn = start;
 		if (end_pfn < end)
 			end_pfn = end;
 
-		map.pfn = __phys_to_pfn(mi->bank[i].start);
-		map.virtual = __phys_to_virt(mi->bank[i].start);
-		map.length = mi->bank[i].size;
-		map.type = MT_MEMORY;
-
-		create_mapping(&map);
+		map_memory_bank(bank);
 	}
 
 	/*
@@ -346,9 +282,9 @@ bootmem_init_node(int node, int initrd_node, struct meminfo *mi)
 	return end_pfn;
 }
 
-static void __init bootmem_init(struct meminfo *mi)
+void __init bootmem_init(struct meminfo *mi)
 {
-	unsigned long addr, memend_pfn = 0;
+	unsigned long memend_pfn = 0;
 	int node, initrd_node, i;
 
 	/*
@@ -361,26 +297,6 @@ static void __init bootmem_init(struct meminfo *mi)
 	memcpy(&meminfo, mi, sizeof(meminfo));
 
 	/*
-	 * Clear out all the mappings below the kernel image.
-	 */
-	for (addr = 0; addr < MODULE_START; addr += PGDIR_SIZE)
-		pmd_clear(pmd_off_k(addr));
-#ifdef CONFIG_XIP_KERNEL
-	/* The XIP kernel is mapped in the module area -- skip over it */
-	addr = ((unsigned long)&_etext + PGDIR_SIZE - 1) & PGDIR_MASK;
-#endif
-	for ( ; addr < PAGE_OFFSET; addr += PGDIR_SIZE)
-		pmd_clear(pmd_off_k(addr));
-
-	/*
-	 * Clear out all the kernel space mappings, except for the first
-	 * memory bank, up to the end of the vmalloc region.
-	 */
-	for (addr = __phys_to_virt(mi->bank[0].start + mi->bank[0].size);
-	     addr < VMALLOC_END; addr += PGDIR_SIZE)
-		pmd_clear(pmd_off_k(addr));
-
-	/*
 	 * Locate which node contains the ramdisk image, if any.
 	 */
 	initrd_node = check_initrd(mi);
@@ -413,114 +329,6 @@ static void __init bootmem_init(struct meminfo *mi)
 	max_pfn = max_low_pfn = memend_pfn - PHYS_PFN_OFFSET;
 }
 
-/*
- * Set up device the mappings.  Since we clear out the page tables for all
- * mappings above VMALLOC_END, we will remove any debug device mappings.
- * This means you have to be careful how you debug this function, or any
- * called function.  This means you can't use any function or debugging
- * method which may touch any device, otherwise the kernel _will_ crash.
- */
-static void __init devicemaps_init(struct machine_desc *mdesc)
-{
-	struct map_desc map;
-	unsigned long addr;
-	void *vectors;
-
-	/*
-	 * Allocate the vector page early.
-	 */
-	vectors = alloc_bootmem_low_pages(PAGE_SIZE);
-	BUG_ON(!vectors);
-
-	for (addr = VMALLOC_END; addr; addr += PGDIR_SIZE)
-		pmd_clear(pmd_off_k(addr));
-
-	/*
-	 * Map the kernel if it is XIP.
-	 * It is always first in the modulearea.
-	 */
-#ifdef CONFIG_XIP_KERNEL
-	map.pfn = __phys_to_pfn(CONFIG_XIP_PHYS_ADDR & PGDIR_MASK);
-	map.virtual = MODULE_START;
-	map.length = ((unsigned long)&_etext - map.virtual + ~PGDIR_MASK) & PGDIR_MASK;
-	map.type = MT_ROM;
-	create_mapping(&map);
-#endif
-
-	/*
-	 * Map the cache flushing regions.
-	 */
-#ifdef FLUSH_BASE
-	map.pfn = __phys_to_pfn(FLUSH_BASE_PHYS);
-	map.virtual = FLUSH_BASE;
-	map.length = SZ_1M;
-	map.type = MT_CACHECLEAN;
-	create_mapping(&map);
-#endif
-#ifdef FLUSH_BASE_MINICACHE
-	map.pfn = __phys_to_pfn(FLUSH_BASE_PHYS + SZ_1M);
-	map.virtual = FLUSH_BASE_MINICACHE;
-	map.length = SZ_1M;
-	map.type = MT_MINICLEAN;
-	create_mapping(&map);
-#endif
-
-	/*
-	 * Create a mapping for the machine vectors at the high-vectors
-	 * location (0xffff0000).  If we aren't using high-vectors, also
-	 * create a mapping at the low-vectors virtual address.
-	 */
-	map.pfn = __phys_to_pfn(virt_to_phys(vectors));
-	map.virtual = 0xffff0000;
-	map.length = PAGE_SIZE;
-	map.type = MT_HIGH_VECTORS;
-	create_mapping(&map);
-
-	if (!vectors_high()) {
-		map.virtual = 0;
-		map.type = MT_LOW_VECTORS;
-		create_mapping(&map);
-	}
-
-	/*
-	 * Ask the machine support to map in the statically mapped devices.
-	 */
-	if (mdesc->map_io)
-		mdesc->map_io();
-
-	/*
-	 * Finally flush the caches and tlb to ensure that we're in a
-	 * consistent state wrt the writebuffer.  This also ensures that
-	 * any write-allocated cache lines in the vector page are written
-	 * back.  After this point, we can start to touch devices again.
-	 */
-	local_flush_tlb_all();
-	flush_cache_all();
-}
-
-/*
- * paging_init() sets up the page tables, initialises the zone memory
- * maps, and sets up the zero page, bad page and bad page tables.
- */
-void __init paging_init(struct meminfo *mi, struct machine_desc *mdesc)
-{
-	void *zero_page;
-
-	build_mem_type_table();
-	bootmem_init(mi);
-	devicemaps_init(mdesc);
-
-	top_pmd = pmd_off_k(0xffff0000);
-
-	/*
-	 * allocate the zero page.  Note that we count on this going ok.
-	 */
-	zero_page = alloc_bootmem_low_pages(PAGE_SIZE);
-	memzero(zero_page, PAGE_SIZE);
-	empty_zero_page = virt_to_page(zero_page);
-	flush_dcache_page(empty_zero_page);
-}
-
 static inline void free_area(unsigned long addr, unsigned long end, char *s)
 {
 	unsigned int size = (end - addr) >> 10;
diff --git a/arch/arm/mm/mm-armv.c b/arch/arm/mm/mm-armv.c
deleted file mode 100644
index 38769f5862bc..000000000000
--- a/arch/arm/mm/mm-armv.c
+++ /dev/null
@@ -1,663 +0,0 @@
-/*
- *  linux/arch/arm/mm/mm-armv.c
- *
- *  Copyright (C) 1998-2005 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Page table sludge for ARM v3 and v4 processor architectures.
- */
-#include <linux/module.h>
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/bootmem.h>
-#include <linux/highmem.h>
-#include <linux/nodemask.h>
-
-#include <asm/pgalloc.h>
-#include <asm/page.h>
-#include <asm/setup.h>
-#include <asm/tlbflush.h>
-
-#include <asm/mach/map.h>
-
-#define CPOLICY_UNCACHED	0
-#define CPOLICY_BUFFERED	1
-#define CPOLICY_WRITETHROUGH	2
-#define CPOLICY_WRITEBACK	3
-#define CPOLICY_WRITEALLOC	4
-
-static unsigned int cachepolicy __initdata = CPOLICY_WRITEBACK;
-static unsigned int ecc_mask __initdata = 0;
-pgprot_t pgprot_kernel;
-
-EXPORT_SYMBOL(pgprot_kernel);
-
-pmd_t *top_pmd;
-
-struct cachepolicy {
-	const char	policy[16];
-	unsigned int	cr_mask;
-	unsigned int	pmd;
-	unsigned int	pte;
-};
-
-static struct cachepolicy cache_policies[] __initdata = {
-	{
-		.policy		= "uncached",
-		.cr_mask	= CR_W|CR_C,
-		.pmd		= PMD_SECT_UNCACHED,
-		.pte		= 0,
-	}, {
-		.policy		= "buffered",
-		.cr_mask	= CR_C,
-		.pmd		= PMD_SECT_BUFFERED,
-		.pte		= PTE_BUFFERABLE,
-	}, {
-		.policy		= "writethrough",
-		.cr_mask	= 0,
-		.pmd		= PMD_SECT_WT,
-		.pte		= PTE_CACHEABLE,
-	}, {
-		.policy		= "writeback",
-		.cr_mask	= 0,
-		.pmd		= PMD_SECT_WB,
-		.pte		= PTE_BUFFERABLE|PTE_CACHEABLE,
-	}, {
-		.policy		= "writealloc",
-		.cr_mask	= 0,
-		.pmd		= PMD_SECT_WBWA,
-		.pte		= PTE_BUFFERABLE|PTE_CACHEABLE,
-	}
-};
-
-/*
- * These are useful for identifing cache coherency
- * problems by allowing the cache or the cache and
- * writebuffer to be turned off.  (Note: the write
- * buffer should not be on and the cache off).
- */
-static void __init early_cachepolicy(char **p)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(cache_policies); i++) {
-		int len = strlen(cache_policies[i].policy);
-
-		if (memcmp(*p, cache_policies[i].policy, len) == 0) {
-			cachepolicy = i;
-			cr_alignment &= ~cache_policies[i].cr_mask;
-			cr_no_alignment &= ~cache_policies[i].cr_mask;
-			*p += len;
-			break;
-		}
-	}
-	if (i == ARRAY_SIZE(cache_policies))
-		printk(KERN_ERR "ERROR: unknown or unsupported cache policy\n");
-	flush_cache_all();
-	set_cr(cr_alignment);
-}
-
-static void __init early_nocache(char **__unused)
-{
-	char *p = "buffered";
-	printk(KERN_WARNING "nocache is deprecated; use cachepolicy=%s\n", p);
-	early_cachepolicy(&p);
-}
-
-static void __init early_nowrite(char **__unused)
-{
-	char *p = "uncached";
-	printk(KERN_WARNING "nowb is deprecated; use cachepolicy=%s\n", p);
-	early_cachepolicy(&p);
-}
-
-static void __init early_ecc(char **p)
-{
-	if (memcmp(*p, "on", 2) == 0) {
-		ecc_mask = PMD_PROTECTION;
-		*p += 2;
-	} else if (memcmp(*p, "off", 3) == 0) {
-		ecc_mask = 0;
-		*p += 3;
-	}
-}
-
-__early_param("nocache", early_nocache);
-__early_param("nowb", early_nowrite);
-__early_param("cachepolicy=", early_cachepolicy);
-__early_param("ecc=", early_ecc);
-
-static int __init noalign_setup(char *__unused)
-{
-	cr_alignment &= ~CR_A;
-	cr_no_alignment &= ~CR_A;
-	set_cr(cr_alignment);
-	return 1;
-}
-
-__setup("noalign", noalign_setup);
-
-#define FIRST_KERNEL_PGD_NR	(FIRST_USER_PGD_NR + USER_PTRS_PER_PGD)
-
-static inline pmd_t *pmd_off(pgd_t *pgd, unsigned long virt)
-{
-	return pmd_offset(pgd, virt);
-}
-
-static inline pmd_t *pmd_off_k(unsigned long virt)
-{
-	return pmd_off(pgd_offset_k(virt), virt);
-}
-
-/*
- * need to get a 16k page for level 1
- */
-pgd_t *get_pgd_slow(struct mm_struct *mm)
-{
-	pgd_t *new_pgd, *init_pgd;
-	pmd_t *new_pmd, *init_pmd;
-	pte_t *new_pte, *init_pte;
-
-	new_pgd = (pgd_t *)__get_free_pages(GFP_KERNEL, 2);
-	if (!new_pgd)
-		goto no_pgd;
-
-	memzero(new_pgd, FIRST_KERNEL_PGD_NR * sizeof(pgd_t));
-
-	/*
-	 * Copy over the kernel and IO PGD entries
-	 */
-	init_pgd = pgd_offset_k(0);
-	memcpy(new_pgd + FIRST_KERNEL_PGD_NR, init_pgd + FIRST_KERNEL_PGD_NR,
-		       (PTRS_PER_PGD - FIRST_KERNEL_PGD_NR) * sizeof(pgd_t));
-
-	clean_dcache_area(new_pgd, PTRS_PER_PGD * sizeof(pgd_t));
-
-	if (!vectors_high()) {
-		/*
-		 * On ARM, first page must always be allocated since it
-		 * contains the machine vectors.
-		 */
-		new_pmd = pmd_alloc(mm, new_pgd, 0);
-		if (!new_pmd)
-			goto no_pmd;
-
-		new_pte = pte_alloc_map(mm, new_pmd, 0);
-		if (!new_pte)
-			goto no_pte;
-
-		init_pmd = pmd_offset(init_pgd, 0);
-		init_pte = pte_offset_map_nested(init_pmd, 0);
-		set_pte(new_pte, *init_pte);
-		pte_unmap_nested(init_pte);
-		pte_unmap(new_pte);
-	}
-
-	return new_pgd;
-
-no_pte:
-	pmd_free(new_pmd);
-no_pmd:
-	free_pages((unsigned long)new_pgd, 2);
-no_pgd:
-	return NULL;
-}
-
-void free_pgd_slow(pgd_t *pgd)
-{
-	pmd_t *pmd;
-	struct page *pte;
-
-	if (!pgd)
-		return;
-
-	/* pgd is always present and good */
-	pmd = pmd_off(pgd, 0);
-	if (pmd_none(*pmd))
-		goto free;
-	if (pmd_bad(*pmd)) {
-		pmd_ERROR(*pmd);
-		pmd_clear(pmd);
-		goto free;
-	}
-
-	pte = pmd_page(*pmd);
-	pmd_clear(pmd);
-	dec_zone_page_state(virt_to_page((unsigned long *)pgd), NR_PAGETABLE);
-	pte_lock_deinit(pte);
-	pte_free(pte);
-	pmd_free(pmd);
-free:
-	free_pages((unsigned long) pgd, 2);
-}
-
-/*
- * Create a SECTION PGD between VIRT and PHYS in domain
- * DOMAIN with protection PROT.  This operates on half-
- * pgdir entry increments.
- */
-static inline void
-alloc_init_section(unsigned long virt, unsigned long phys, int prot)
-{
-	pmd_t *pmdp = pmd_off_k(virt);
-
-	if (virt & (1 << 20))
-		pmdp++;
-
-	*pmdp = __pmd(phys | prot);
-	flush_pmd_entry(pmdp);
-}
-
-/*
- * Create a SUPER SECTION PGD between VIRT and PHYS with protection PROT
- */
-static inline void
-alloc_init_supersection(unsigned long virt, unsigned long phys, int prot)
-{
-	int i;
-
-	for (i = 0; i < 16; i += 1) {
-		alloc_init_section(virt, phys, prot | PMD_SECT_SUPER);
-
-		virt += (PGDIR_SIZE / 2);
-	}
-}
-
-/*
- * Add a PAGE mapping between VIRT and PHYS in domain
- * DOMAIN with protection PROT.  Note that due to the
- * way we map the PTEs, we must allocate two PTE_SIZE'd
- * blocks - one for the Linux pte table, and one for
- * the hardware pte table.
- */
-static inline void
-alloc_init_page(unsigned long virt, unsigned long phys, unsigned int prot_l1, pgprot_t prot)
-{
-	pmd_t *pmdp = pmd_off_k(virt);
-	pte_t *ptep;
-
-	if (pmd_none(*pmdp)) {
-		ptep = alloc_bootmem_low_pages(2 * PTRS_PER_PTE *
-					       sizeof(pte_t));
-
-		__pmd_populate(pmdp, __pa(ptep) | prot_l1);
-	}
-	ptep = pte_offset_kernel(pmdp, virt);
-
-	set_pte(ptep, pfn_pte(phys >> PAGE_SHIFT, prot));
-}
-
-struct mem_types {
-	unsigned int	prot_pte;
-	unsigned int	prot_l1;
-	unsigned int	prot_sect;
-	unsigned int	domain;
-};
-
-static struct mem_types mem_types[] __initdata = {
-	[MT_DEVICE] = {
-		.prot_pte  = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
-				L_PTE_WRITE,
-		.prot_l1   = PMD_TYPE_TABLE,
-		.prot_sect = PMD_TYPE_SECT | PMD_BIT4 | PMD_SECT_UNCACHED |
-				PMD_SECT_AP_WRITE,
-		.domain    = DOMAIN_IO,
-	},
-	[MT_CACHECLEAN] = {
-		.prot_sect = PMD_TYPE_SECT | PMD_BIT4,
-		.domain    = DOMAIN_KERNEL,
-	},
-	[MT_MINICLEAN] = {
-		.prot_sect = PMD_TYPE_SECT | PMD_BIT4 | PMD_SECT_MINICACHE,
-		.domain    = DOMAIN_KERNEL,
-	},
-	[MT_LOW_VECTORS] = {
-		.prot_pte  = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
-				L_PTE_EXEC,
-		.prot_l1   = PMD_TYPE_TABLE,
-		.domain    = DOMAIN_USER,
-	},
-	[MT_HIGH_VECTORS] = {
-		.prot_pte  = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
-				L_PTE_USER | L_PTE_EXEC,
-		.prot_l1   = PMD_TYPE_TABLE,
-		.domain    = DOMAIN_USER,
-	},
-	[MT_MEMORY] = {
-		.prot_sect = PMD_TYPE_SECT | PMD_BIT4 | PMD_SECT_AP_WRITE,
-		.domain    = DOMAIN_KERNEL,
-	},
-	[MT_ROM] = {
-		.prot_sect = PMD_TYPE_SECT | PMD_BIT4,
-		.domain    = DOMAIN_KERNEL,
-	},
-	[MT_IXP2000_DEVICE] = { /* IXP2400 requires XCB=101 for on-chip I/O */
-		.prot_pte  = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
-				L_PTE_WRITE,
-		.prot_l1   = PMD_TYPE_TABLE,
-		.prot_sect = PMD_TYPE_SECT | PMD_BIT4 | PMD_SECT_UNCACHED |
-				PMD_SECT_AP_WRITE | PMD_SECT_BUFFERABLE |
-				PMD_SECT_TEX(1),
-		.domain    = DOMAIN_IO,
-	},
-	[MT_NONSHARED_DEVICE] = {
-		.prot_l1   = PMD_TYPE_TABLE,
-		.prot_sect = PMD_TYPE_SECT | PMD_BIT4 | PMD_SECT_NONSHARED_DEV |
-				PMD_SECT_AP_WRITE,
-		.domain    = DOMAIN_IO,
-	}
-};
-
-/*
- * Adjust the PMD section entries according to the CPU in use.
- */
-void __init build_mem_type_table(void)
-{
-	struct cachepolicy *cp;
-	unsigned int cr = get_cr();
-	unsigned int user_pgprot, kern_pgprot;
-	int cpu_arch = cpu_architecture();
-	int i;
-
-#if defined(CONFIG_CPU_DCACHE_DISABLE)
-	if (cachepolicy > CPOLICY_BUFFERED)
-		cachepolicy = CPOLICY_BUFFERED;
-#elif defined(CONFIG_CPU_DCACHE_WRITETHROUGH)
-	if (cachepolicy > CPOLICY_WRITETHROUGH)
-		cachepolicy = CPOLICY_WRITETHROUGH;
-#endif
-	if (cpu_arch < CPU_ARCH_ARMv5) {
-		if (cachepolicy >= CPOLICY_WRITEALLOC)
-			cachepolicy = CPOLICY_WRITEBACK;
-		ecc_mask = 0;
-	}
-
-	/*
-	 * Xscale must not have PMD bit 4 set for section mappings.
-	 */
-	if (cpu_is_xscale())
-		for (i = 0; i < ARRAY_SIZE(mem_types); i++)
-			mem_types[i].prot_sect &= ~PMD_BIT4;
-
-	/*
-	 * ARMv5 and lower, excluding Xscale, bit 4 must be set for
-	 * page tables.
-	 */
-	if (cpu_arch < CPU_ARCH_ARMv6 && !cpu_is_xscale())
-		for (i = 0; i < ARRAY_SIZE(mem_types); i++)
-			if (mem_types[i].prot_l1)
-				mem_types[i].prot_l1 |= PMD_BIT4;
-
-	cp = &cache_policies[cachepolicy];
-	kern_pgprot = user_pgprot = cp->pte;
-
-	/*
-	 * Enable CPU-specific coherency if supported.
-	 * (Only available on XSC3 at the moment.)
-	 */
-	if (arch_is_coherent()) {
-		if (cpu_is_xsc3()) {
-			mem_types[MT_MEMORY].prot_sect |= PMD_SECT_S;
-			mem_types[MT_MEMORY].prot_pte |= L_PTE_COHERENT;
-		}
-	}
-
-	/*
-	 * ARMv6 and above have extended page tables.
-	 */
-	if (cpu_arch >= CPU_ARCH_ARMv6 && (cr & CR_XP)) {
-		/*
-		 * bit 4 becomes XN which we must clear for the
-		 * kernel memory mapping.
-		 */
-		mem_types[MT_MEMORY].prot_sect &= ~PMD_SECT_XN;
-		mem_types[MT_ROM].prot_sect &= ~PMD_SECT_XN;
-
-		/*
-		 * Mark cache clean areas and XIP ROM read only
-		 * from SVC mode and no access from userspace.
-		 */
-		mem_types[MT_ROM].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE;
-		mem_types[MT_MINICLEAN].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE;
-		mem_types[MT_CACHECLEAN].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE;
-
-		/*
-		 * Mark the device area as "shared device"
-		 */
-		mem_types[MT_DEVICE].prot_pte |= L_PTE_BUFFERABLE;
-		mem_types[MT_DEVICE].prot_sect |= PMD_SECT_BUFFERED;
-
-		/*
-		 * User pages need to be mapped with the ASID
-		 * (iow, non-global)
-		 */
-		user_pgprot |= L_PTE_ASID;
-
-#ifdef CONFIG_SMP
-		/*
-		 * Mark memory with the "shared" attribute for SMP systems
-		 */
-		user_pgprot |= L_PTE_SHARED;
-		kern_pgprot |= L_PTE_SHARED;
-		mem_types[MT_MEMORY].prot_sect |= PMD_SECT_S;
-#endif
-	}
-
-	for (i = 0; i < 16; i++) {
-		unsigned long v = pgprot_val(protection_map[i]);
-		v = (v & ~(L_PTE_BUFFERABLE|L_PTE_CACHEABLE)) | user_pgprot;
-		protection_map[i] = __pgprot(v);
-	}
-
-	mem_types[MT_LOW_VECTORS].prot_pte |= kern_pgprot;
-	mem_types[MT_HIGH_VECTORS].prot_pte |= kern_pgprot;
-
-	if (cpu_arch >= CPU_ARCH_ARMv5) {
-#ifndef CONFIG_SMP
-		/*
-		 * Only use write-through for non-SMP systems
-		 */
-		mem_types[MT_LOW_VECTORS].prot_pte &= ~L_PTE_BUFFERABLE;
-		mem_types[MT_HIGH_VECTORS].prot_pte &= ~L_PTE_BUFFERABLE;
-#endif
-	} else {
-		mem_types[MT_MINICLEAN].prot_sect &= ~PMD_SECT_TEX(1);
-	}
-
-	pgprot_kernel = __pgprot(L_PTE_PRESENT | L_PTE_YOUNG |
-				 L_PTE_DIRTY | L_PTE_WRITE |
-				 L_PTE_EXEC | kern_pgprot);
-
-	mem_types[MT_LOW_VECTORS].prot_l1 |= ecc_mask;
-	mem_types[MT_HIGH_VECTORS].prot_l1 |= ecc_mask;
-	mem_types[MT_MEMORY].prot_sect |= ecc_mask | cp->pmd;
-	mem_types[MT_ROM].prot_sect |= cp->pmd;
-
-	switch (cp->pmd) {
-	case PMD_SECT_WT:
-		mem_types[MT_CACHECLEAN].prot_sect |= PMD_SECT_WT;
-		break;
-	case PMD_SECT_WB:
-	case PMD_SECT_WBWA:
-		mem_types[MT_CACHECLEAN].prot_sect |= PMD_SECT_WB;
-		break;
-	}
-	printk("Memory policy: ECC %sabled, Data cache %s\n",
-		ecc_mask ? "en" : "dis", cp->policy);
-}
-
-#define vectors_base()	(vectors_high() ? 0xffff0000 : 0)
-
-/*
- * Create the page directory entries and any necessary
- * page tables for the mapping specified by `md'.  We
- * are able to cope here with varying sizes and address
- * offsets, and we take full advantage of sections and
- * supersections.
- */
-void __init create_mapping(struct map_desc *md)
-{
-	unsigned long virt, length;
-	int prot_sect, prot_l1, domain;
-	pgprot_t prot_pte;
-	unsigned long off = (u32)__pfn_to_phys(md->pfn);
-
-	if (md->virtual != vectors_base() && md->virtual < TASK_SIZE) {
-		printk(KERN_WARNING "BUG: not creating mapping for "
-		       "0x%08llx at 0x%08lx in user region\n",
-		       __pfn_to_phys((u64)md->pfn), md->virtual);
-		return;
-	}
-
-	if ((md->type == MT_DEVICE || md->type == MT_ROM) &&
-	    md->virtual >= PAGE_OFFSET && md->virtual < VMALLOC_END) {
-		printk(KERN_WARNING "BUG: mapping for 0x%08llx at 0x%08lx "
-		       "overlaps vmalloc space\n",
-		       __pfn_to_phys((u64)md->pfn), md->virtual);
-	}
-
-	domain	  = mem_types[md->type].domain;
-	prot_pte  = __pgprot(mem_types[md->type].prot_pte);
-	prot_l1   = mem_types[md->type].prot_l1 | PMD_DOMAIN(domain);
-	prot_sect = mem_types[md->type].prot_sect | PMD_DOMAIN(domain);
-
-	/*
-	 * Catch 36-bit addresses
-	 */
-	if(md->pfn >= 0x100000) {
-		if(domain) {
-			printk(KERN_ERR "MM: invalid domain in supersection "
-				"mapping for 0x%08llx at 0x%08lx\n",
-				__pfn_to_phys((u64)md->pfn), md->virtual);
-			return;
-		}
-		if((md->virtual | md->length | __pfn_to_phys(md->pfn))
-			& ~SUPERSECTION_MASK) {
-			printk(KERN_ERR "MM: cannot create mapping for "
-				"0x%08llx at 0x%08lx invalid alignment\n",
-				__pfn_to_phys((u64)md->pfn), md->virtual);
-			return;
-		}
-
-		/*
-		 * Shift bits [35:32] of address into bits [23:20] of PMD
-		 * (See ARMv6 spec).
-		 */
-		off |= (((md->pfn >> (32 - PAGE_SHIFT)) & 0xF) << 20);
-	}
-
-	virt   = md->virtual;
-	off   -= virt;
-	length = md->length;
-
-	if (mem_types[md->type].prot_l1 == 0 &&
-	    (virt & 0xfffff || (virt + off) & 0xfffff || (virt + length) & 0xfffff)) {
-		printk(KERN_WARNING "BUG: map for 0x%08lx at 0x%08lx can not "
-		       "be mapped using pages, ignoring.\n",
-		       __pfn_to_phys(md->pfn), md->virtual);
-		return;
-	}
-
-	while ((virt & 0xfffff || (virt + off) & 0xfffff) && length >= PAGE_SIZE) {
-		alloc_init_page(virt, virt + off, prot_l1, prot_pte);
-
-		virt   += PAGE_SIZE;
-		length -= PAGE_SIZE;
-	}
-
-	/* N.B.	ARMv6 supersections are only defined to work with domain 0.
-	 *	Since domain assignments can in fact be arbitrary, the
-	 *	'domain == 0' check below is required to insure that ARMv6
-	 *	supersections are only allocated for domain 0 regardless
-	 *	of the actual domain assignments in use.
-	 */
-	if ((cpu_architecture() >= CPU_ARCH_ARMv6 || cpu_is_xsc3())
-		&& domain == 0) {
-		/*
-		 * Align to supersection boundary if !high pages.
-		 * High pages have already been checked for proper
-		 * alignment above and they will fail the SUPSERSECTION_MASK
-		 * check because of the way the address is encoded into
-		 * offset.
-		 */
-		if (md->pfn <= 0x100000) {
-			while ((virt & ~SUPERSECTION_MASK ||
-			        (virt + off) & ~SUPERSECTION_MASK) &&
-				length >= (PGDIR_SIZE / 2)) {
-				alloc_init_section(virt, virt + off, prot_sect);
-
-				virt   += (PGDIR_SIZE / 2);
-				length -= (PGDIR_SIZE / 2);
-			}
-		}
-
-		while (length >= SUPERSECTION_SIZE) {
-			alloc_init_supersection(virt, virt + off, prot_sect);
-
-			virt   += SUPERSECTION_SIZE;
-			length -= SUPERSECTION_SIZE;
-		}
-	}
-
-	/*
-	 * A section mapping covers half a "pgdir" entry.
-	 */
-	while (length >= (PGDIR_SIZE / 2)) {
-		alloc_init_section(virt, virt + off, prot_sect);
-
-		virt   += (PGDIR_SIZE / 2);
-		length -= (PGDIR_SIZE / 2);
-	}
-
-	while (length >= PAGE_SIZE) {
-		alloc_init_page(virt, virt + off, prot_l1, prot_pte);
-
-		virt   += PAGE_SIZE;
-		length -= PAGE_SIZE;
-	}
-}
-
-/*
- * In order to soft-boot, we need to insert a 1:1 mapping in place of
- * the user-mode pages.  This will then ensure that we have predictable
- * results when turning the mmu off
- */
-void setup_mm_for_reboot(char mode)
-{
-	unsigned long base_pmdval;
-	pgd_t *pgd;
-	int i;
-
-	if (current->mm && current->mm->pgd)
-		pgd = current->mm->pgd;
-	else
-		pgd = init_mm.pgd;
-
-	base_pmdval = PMD_SECT_AP_WRITE | PMD_SECT_AP_READ | PMD_TYPE_SECT;
-	if (cpu_architecture() <= CPU_ARCH_ARMv5TEJ && !cpu_is_xscale())
-		base_pmdval |= PMD_BIT4;
-
-	for (i = 0; i < FIRST_USER_PGD_NR + USER_PTRS_PER_PGD; i++, pgd++) {
-		unsigned long pmdval = (i << PGDIR_SHIFT) | base_pmdval;
-		pmd_t *pmd;
-
-		pmd = pmd_off(pgd, i << PGDIR_SHIFT);
-		pmd[0] = __pmd(pmdval);
-		pmd[1] = __pmd(pmdval + (1 << (PGDIR_SHIFT - 1)));
-		flush_pmd_entry(pmd);
-	}
-}
-
-/*
- * Create the architecture specific mappings
- */
-void __init iotable_init(struct map_desc *io_desc, int nr)
-{
-	int i;
-
-	for (i = 0; i < nr; i++)
-		create_mapping(io_desc + i);
-}
diff --git a/arch/arm/mm/mm.h b/arch/arm/mm/mm.h
new file mode 100644
index 000000000000..bb2bc9ab6bd3
--- /dev/null
+++ b/arch/arm/mm/mm.h
@@ -0,0 +1,22 @@
+/* the upper-most page table pointer */
+extern pmd_t *top_pmd;
+
+#define TOP_PTE(x)	pte_offset_kernel(top_pmd, x)
+
+static inline pmd_t *pmd_off(pgd_t *pgd, unsigned long virt)
+{
+	return pmd_offset(pgd, virt);
+}
+
+static inline pmd_t *pmd_off_k(unsigned long virt)
+{
+	return pmd_off(pgd_offset_k(virt), virt);
+}
+
+struct map_desc;
+struct meminfo;
+struct pglist_data;
+
+void __init create_mapping(struct map_desc *md);
+void __init bootmem_init(struct meminfo *mi);
+void reserve_node_zero(struct pglist_data *pgdat);
diff --git a/arch/arm/mm/mmap.c b/arch/arm/mm/mmap.c
index 29e54807c5bc..b0b5f4694070 100644
--- a/arch/arm/mm/mmap.c
+++ b/arch/arm/mm/mmap.c
@@ -114,3 +114,25 @@ full_search:
 	}
 }
 
+
+/*
+ * You really shouldn't be using read() or write() on /dev/mem.  This
+ * might go away in the future.
+ */
+int valid_phys_addr_range(unsigned long addr, size_t size)
+{
+	if (addr + size > __pa(high_memory))
+		return 0;
+
+	return 1;
+}
+
+/*
+ * We don't use supersection mappings for mmap() on /dev/mem, which
+ * means that we can't map the memory area above the 4G barrier into
+ * userspace.
+ */
+int valid_mmap_phys_addr_range(unsigned long pfn, size_t size)
+{
+	return !(pfn + (size >> PAGE_SHIFT) > 0x00100000);
+}
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index 0d90227a0a32..e566cbe4b222 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -1,45 +1,771 @@
 /*
  *  linux/arch/arm/mm/mmu.c
  *
- *  Copyright (C) 2002-2003 Deep Blue Solutions Ltd, all rights reserved.
+ *  Copyright (C) 1995-2005 Russell King
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
 #include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/mm.h>
+#include <linux/bootmem.h>
+#include <linux/mman.h>
+#include <linux/nodemask.h>
 
-#include <asm/mmu_context.h>
-#include <asm/tlbflush.h>
+#include <asm/mach-types.h>
+#include <asm/setup.h>
+#include <asm/sizes.h>
+#include <asm/tlb.h>
 
-unsigned int cpu_last_asid = { 1 << ASID_BITS };
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include "mm.h"
+
+DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
+
+extern void _stext, __data_start, _end;
+extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
+
+/*
+ * empty_zero_page is a special page that is used for
+ * zero-initialized data and COW.
+ */
+struct page *empty_zero_page;
 
 /*
- * We fork()ed a process, and we need a new context for the child
- * to run in.  We reserve version 0 for initial tasks so we will
- * always allocate an ASID.
+ * The pmd table for the upper-most set of pages.
  */
-void __init_new_context(struct task_struct *tsk, struct mm_struct *mm)
+pmd_t *top_pmd;
+
+#define CPOLICY_UNCACHED	0
+#define CPOLICY_BUFFERED	1
+#define CPOLICY_WRITETHROUGH	2
+#define CPOLICY_WRITEBACK	3
+#define CPOLICY_WRITEALLOC	4
+
+static unsigned int cachepolicy __initdata = CPOLICY_WRITEBACK;
+static unsigned int ecc_mask __initdata = 0;
+pgprot_t pgprot_kernel;
+
+EXPORT_SYMBOL(pgprot_kernel);
+
+struct cachepolicy {
+	const char	policy[16];
+	unsigned int	cr_mask;
+	unsigned int	pmd;
+	unsigned int	pte;
+};
+
+static struct cachepolicy cache_policies[] __initdata = {
+	{
+		.policy		= "uncached",
+		.cr_mask	= CR_W|CR_C,
+		.pmd		= PMD_SECT_UNCACHED,
+		.pte		= 0,
+	}, {
+		.policy		= "buffered",
+		.cr_mask	= CR_C,
+		.pmd		= PMD_SECT_BUFFERED,
+		.pte		= PTE_BUFFERABLE,
+	}, {
+		.policy		= "writethrough",
+		.cr_mask	= 0,
+		.pmd		= PMD_SECT_WT,
+		.pte		= PTE_CACHEABLE,
+	}, {
+		.policy		= "writeback",
+		.cr_mask	= 0,
+		.pmd		= PMD_SECT_WB,
+		.pte		= PTE_BUFFERABLE|PTE_CACHEABLE,
+	}, {
+		.policy		= "writealloc",
+		.cr_mask	= 0,
+		.pmd		= PMD_SECT_WBWA,
+		.pte		= PTE_BUFFERABLE|PTE_CACHEABLE,
+	}
+};
+
+/*
+ * These are useful for identifing cache coherency
+ * problems by allowing the cache or the cache and
+ * writebuffer to be turned off.  (Note: the write
+ * buffer should not be on and the cache off).
+ */
+static void __init early_cachepolicy(char **p)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(cache_policies); i++) {
+		int len = strlen(cache_policies[i].policy);
+
+		if (memcmp(*p, cache_policies[i].policy, len) == 0) {
+			cachepolicy = i;
+			cr_alignment &= ~cache_policies[i].cr_mask;
+			cr_no_alignment &= ~cache_policies[i].cr_mask;
+			*p += len;
+			break;
+		}
+	}
+	if (i == ARRAY_SIZE(cache_policies))
+		printk(KERN_ERR "ERROR: unknown or unsupported cache policy\n");
+	flush_cache_all();
+	set_cr(cr_alignment);
+}
+__early_param("cachepolicy=", early_cachepolicy);
+
+static void __init early_nocache(char **__unused)
+{
+	char *p = "buffered";
+	printk(KERN_WARNING "nocache is deprecated; use cachepolicy=%s\n", p);
+	early_cachepolicy(&p);
+}
+__early_param("nocache", early_nocache);
+
+static void __init early_nowrite(char **__unused)
+{
+	char *p = "uncached";
+	printk(KERN_WARNING "nowb is deprecated; use cachepolicy=%s\n", p);
+	early_cachepolicy(&p);
+}
+__early_param("nowb", early_nowrite);
+
+static void __init early_ecc(char **p)
+{
+	if (memcmp(*p, "on", 2) == 0) {
+		ecc_mask = PMD_PROTECTION;
+		*p += 2;
+	} else if (memcmp(*p, "off", 3) == 0) {
+		ecc_mask = 0;
+		*p += 3;
+	}
+}
+__early_param("ecc=", early_ecc);
+
+static int __init noalign_setup(char *__unused)
 {
-	mm->context.id = 0;
+	cr_alignment &= ~CR_A;
+	cr_no_alignment &= ~CR_A;
+	set_cr(cr_alignment);
+	return 1;
 }
+__setup("noalign", noalign_setup);
+
+struct mem_types {
+	unsigned int	prot_pte;
+	unsigned int	prot_l1;
+	unsigned int	prot_sect;
+	unsigned int	domain;
+};
 
-void __new_context(struct mm_struct *mm)
+static struct mem_types mem_types[] __initdata = {
+	[MT_DEVICE] = {
+		.prot_pte  = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
+				L_PTE_WRITE,
+		.prot_l1   = PMD_TYPE_TABLE,
+		.prot_sect = PMD_TYPE_SECT | PMD_BIT4 | PMD_SECT_UNCACHED |
+				PMD_SECT_AP_WRITE,
+		.domain    = DOMAIN_IO,
+	},
+	[MT_CACHECLEAN] = {
+		.prot_sect = PMD_TYPE_SECT | PMD_BIT4,
+		.domain    = DOMAIN_KERNEL,
+	},
+	[MT_MINICLEAN] = {
+		.prot_sect = PMD_TYPE_SECT | PMD_BIT4 | PMD_SECT_MINICACHE,
+		.domain    = DOMAIN_KERNEL,
+	},
+	[MT_LOW_VECTORS] = {
+		.prot_pte  = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
+				L_PTE_EXEC,
+		.prot_l1   = PMD_TYPE_TABLE,
+		.domain    = DOMAIN_USER,
+	},
+	[MT_HIGH_VECTORS] = {
+		.prot_pte  = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
+				L_PTE_USER | L_PTE_EXEC,
+		.prot_l1   = PMD_TYPE_TABLE,
+		.domain    = DOMAIN_USER,
+	},
+	[MT_MEMORY] = {
+		.prot_sect = PMD_TYPE_SECT | PMD_BIT4 | PMD_SECT_AP_WRITE,
+		.domain    = DOMAIN_KERNEL,
+	},
+	[MT_ROM] = {
+		.prot_sect = PMD_TYPE_SECT | PMD_BIT4,
+		.domain    = DOMAIN_KERNEL,
+	},
+	[MT_IXP2000_DEVICE] = { /* IXP2400 requires XCB=101 for on-chip I/O */
+		.prot_pte  = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
+				L_PTE_WRITE,
+		.prot_l1   = PMD_TYPE_TABLE,
+		.prot_sect = PMD_TYPE_SECT | PMD_BIT4 | PMD_SECT_UNCACHED |
+				PMD_SECT_AP_WRITE | PMD_SECT_BUFFERABLE |
+				PMD_SECT_TEX(1),
+		.domain    = DOMAIN_IO,
+	},
+	[MT_NONSHARED_DEVICE] = {
+		.prot_l1   = PMD_TYPE_TABLE,
+		.prot_sect = PMD_TYPE_SECT | PMD_BIT4 | PMD_SECT_NONSHARED_DEV |
+				PMD_SECT_AP_WRITE,
+		.domain    = DOMAIN_IO,
+	}
+};
+
+/*
+ * Adjust the PMD section entries according to the CPU in use.
+ */
+static void __init build_mem_type_table(void)
 {
-	unsigned int asid;
+	struct cachepolicy *cp;
+	unsigned int cr = get_cr();
+	unsigned int user_pgprot, kern_pgprot;
+	int cpu_arch = cpu_architecture();
+	int i;
 
-	asid = ++cpu_last_asid;
-	if (asid == 0)
-		asid = cpu_last_asid = 1 << ASID_BITS;
+#if defined(CONFIG_CPU_DCACHE_DISABLE)
+	if (cachepolicy > CPOLICY_BUFFERED)
+		cachepolicy = CPOLICY_BUFFERED;
+#elif defined(CONFIG_CPU_DCACHE_WRITETHROUGH)
+	if (cachepolicy > CPOLICY_WRITETHROUGH)
+		cachepolicy = CPOLICY_WRITETHROUGH;
+#endif
+	if (cpu_arch < CPU_ARCH_ARMv5) {
+		if (cachepolicy >= CPOLICY_WRITEALLOC)
+			cachepolicy = CPOLICY_WRITEBACK;
+		ecc_mask = 0;
+	}
+
+	/*
+	 * Xscale must not have PMD bit 4 set for section mappings.
+	 */
+	if (cpu_is_xscale())
+		for (i = 0; i < ARRAY_SIZE(mem_types); i++)
+			mem_types[i].prot_sect &= ~PMD_BIT4;
 
 	/*
-	 * If we've used up all our ASIDs, we need
-	 * to start a new version and flush the TLB.
+	 * ARMv5 and lower, excluding Xscale, bit 4 must be set for
+	 * page tables.
 	 */
-	if ((asid & ~ASID_MASK) == 0)
-		flush_tlb_all();
+	if (cpu_arch < CPU_ARCH_ARMv6 && !cpu_is_xscale())
+		for (i = 0; i < ARRAY_SIZE(mem_types); i++)
+			if (mem_types[i].prot_l1)
+				mem_types[i].prot_l1 |= PMD_BIT4;
+
+	cp = &cache_policies[cachepolicy];
+	kern_pgprot = user_pgprot = cp->pte;
+
+	/*
+	 * Enable CPU-specific coherency if supported.
+	 * (Only available on XSC3 at the moment.)
+	 */
+	if (arch_is_coherent()) {
+		if (cpu_is_xsc3()) {
+			mem_types[MT_MEMORY].prot_sect |= PMD_SECT_S;
+			mem_types[MT_MEMORY].prot_pte |= L_PTE_COHERENT;
+		}
+	}
+
+	/*
+	 * ARMv6 and above have extended page tables.
+	 */
+	if (cpu_arch >= CPU_ARCH_ARMv6 && (cr & CR_XP)) {
+		/*
+		 * bit 4 becomes XN which we must clear for the
+		 * kernel memory mapping.
+		 */
+		mem_types[MT_MEMORY].prot_sect &= ~PMD_SECT_XN;
+		mem_types[MT_ROM].prot_sect &= ~PMD_SECT_XN;
+
+		/*
+		 * Mark cache clean areas and XIP ROM read only
+		 * from SVC mode and no access from userspace.
+		 */
+		mem_types[MT_ROM].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE;
+		mem_types[MT_MINICLEAN].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE;
+		mem_types[MT_CACHECLEAN].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE;
+
+		/*
+		 * Mark the device area as "shared device"
+		 */
+		mem_types[MT_DEVICE].prot_pte |= L_PTE_BUFFERABLE;
+		mem_types[MT_DEVICE].prot_sect |= PMD_SECT_BUFFERED;
+
+		/*
+		 * User pages need to be mapped with the ASID
+		 * (iow, non-global)
+		 */
+		user_pgprot |= L_PTE_ASID;
+
+#ifdef CONFIG_SMP
+		/*
+		 * Mark memory with the "shared" attribute for SMP systems
+		 */
+		user_pgprot |= L_PTE_SHARED;
+		kern_pgprot |= L_PTE_SHARED;
+		mem_types[MT_MEMORY].prot_sect |= PMD_SECT_S;
+#endif
+	}
+
+	for (i = 0; i < 16; i++) {
+		unsigned long v = pgprot_val(protection_map[i]);
+		v = (v & ~(L_PTE_BUFFERABLE|L_PTE_CACHEABLE)) | user_pgprot;
+		protection_map[i] = __pgprot(v);
+	}
+
+	mem_types[MT_LOW_VECTORS].prot_pte |= kern_pgprot;
+	mem_types[MT_HIGH_VECTORS].prot_pte |= kern_pgprot;
+
+	if (cpu_arch >= CPU_ARCH_ARMv5) {
+#ifndef CONFIG_SMP
+		/*
+		 * Only use write-through for non-SMP systems
+		 */
+		mem_types[MT_LOW_VECTORS].prot_pte &= ~L_PTE_BUFFERABLE;
+		mem_types[MT_HIGH_VECTORS].prot_pte &= ~L_PTE_BUFFERABLE;
+#endif
+	} else {
+		mem_types[MT_MINICLEAN].prot_sect &= ~PMD_SECT_TEX(1);
+	}
+
+	pgprot_kernel = __pgprot(L_PTE_PRESENT | L_PTE_YOUNG |
+				 L_PTE_DIRTY | L_PTE_WRITE |
+				 L_PTE_EXEC | kern_pgprot);
+
+	mem_types[MT_LOW_VECTORS].prot_l1 |= ecc_mask;
+	mem_types[MT_HIGH_VECTORS].prot_l1 |= ecc_mask;
+	mem_types[MT_MEMORY].prot_sect |= ecc_mask | cp->pmd;
+	mem_types[MT_ROM].prot_sect |= cp->pmd;
+
+	switch (cp->pmd) {
+	case PMD_SECT_WT:
+		mem_types[MT_CACHECLEAN].prot_sect |= PMD_SECT_WT;
+		break;
+	case PMD_SECT_WB:
+	case PMD_SECT_WBWA:
+		mem_types[MT_CACHECLEAN].prot_sect |= PMD_SECT_WB;
+		break;
+	}
+	printk("Memory policy: ECC %sabled, Data cache %s\n",
+		ecc_mask ? "en" : "dis", cp->policy);
+}
+
+#define vectors_base()	(vectors_high() ? 0xffff0000 : 0)
+
+/*
+ * Create a SECTION PGD between VIRT and PHYS in domain
+ * DOMAIN with protection PROT.  This operates on half-
+ * pgdir entry increments.
+ */
+static inline void
+alloc_init_section(unsigned long virt, unsigned long phys, int prot)
+{
+	pmd_t *pmdp = pmd_off_k(virt);
+
+	if (virt & (1 << 20))
+		pmdp++;
+
+	*pmdp = __pmd(phys | prot);
+	flush_pmd_entry(pmdp);
+}
+
+/*
+ * Create a SUPER SECTION PGD between VIRT and PHYS with protection PROT
+ */
+static inline void
+alloc_init_supersection(unsigned long virt, unsigned long phys, int prot)
+{
+	int i;
+
+	for (i = 0; i < 16; i += 1) {
+		alloc_init_section(virt, phys, prot | PMD_SECT_SUPER);
+
+		virt += (PGDIR_SIZE / 2);
+	}
+}
+
+/*
+ * Add a PAGE mapping between VIRT and PHYS in domain
+ * DOMAIN with protection PROT.  Note that due to the
+ * way we map the PTEs, we must allocate two PTE_SIZE'd
+ * blocks - one for the Linux pte table, and one for
+ * the hardware pte table.
+ */
+static inline void
+alloc_init_page(unsigned long virt, unsigned long phys, unsigned int prot_l1, pgprot_t prot)
+{
+	pmd_t *pmdp = pmd_off_k(virt);
+	pte_t *ptep;
+
+	if (pmd_none(*pmdp)) {
+		ptep = alloc_bootmem_low_pages(2 * PTRS_PER_PTE *
+					       sizeof(pte_t));
+
+		__pmd_populate(pmdp, __pa(ptep) | prot_l1);
+	}
+	ptep = pte_offset_kernel(pmdp, virt);
+
+	set_pte(ptep, pfn_pte(phys >> PAGE_SHIFT, prot));
+}
+
+/*
+ * Create the page directory entries and any necessary
+ * page tables for the mapping specified by `md'.  We
+ * are able to cope here with varying sizes and address
+ * offsets, and we take full advantage of sections and
+ * supersections.
+ */
+void __init create_mapping(struct map_desc *md)
+{
+	unsigned long virt, length;
+	int prot_sect, prot_l1, domain;
+	pgprot_t prot_pte;
+	unsigned long off = (u32)__pfn_to_phys(md->pfn);
+
+	if (md->virtual != vectors_base() && md->virtual < TASK_SIZE) {
+		printk(KERN_WARNING "BUG: not creating mapping for "
+		       "0x%08llx at 0x%08lx in user region\n",
+		       __pfn_to_phys((u64)md->pfn), md->virtual);
+		return;
+	}
+
+	if ((md->type == MT_DEVICE || md->type == MT_ROM) &&
+	    md->virtual >= PAGE_OFFSET && md->virtual < VMALLOC_END) {
+		printk(KERN_WARNING "BUG: mapping for 0x%08llx at 0x%08lx "
+		       "overlaps vmalloc space\n",
+		       __pfn_to_phys((u64)md->pfn), md->virtual);
+	}
+
+	domain	  = mem_types[md->type].domain;
+	prot_pte  = __pgprot(mem_types[md->type].prot_pte);
+	prot_l1   = mem_types[md->type].prot_l1 | PMD_DOMAIN(domain);
+	prot_sect = mem_types[md->type].prot_sect | PMD_DOMAIN(domain);
+
+	/*
+	 * Catch 36-bit addresses
+	 */
+	if(md->pfn >= 0x100000) {
+		if(domain) {
+			printk(KERN_ERR "MM: invalid domain in supersection "
+				"mapping for 0x%08llx at 0x%08lx\n",
+				__pfn_to_phys((u64)md->pfn), md->virtual);
+			return;
+		}
+		if((md->virtual | md->length | __pfn_to_phys(md->pfn))
+			& ~SUPERSECTION_MASK) {
+			printk(KERN_ERR "MM: cannot create mapping for "
+				"0x%08llx at 0x%08lx invalid alignment\n",
+				__pfn_to_phys((u64)md->pfn), md->virtual);
+			return;
+		}
+
+		/*
+		 * Shift bits [35:32] of address into bits [23:20] of PMD
+		 * (See ARMv6 spec).
+		 */
+		off |= (((md->pfn >> (32 - PAGE_SHIFT)) & 0xF) << 20);
+	}
+
+	virt   = md->virtual;
+	off   -= virt;
+	length = md->length;
+
+	if (mem_types[md->type].prot_l1 == 0 &&
+	    (virt & 0xfffff || (virt + off) & 0xfffff || (virt + length) & 0xfffff)) {
+		printk(KERN_WARNING "BUG: map for 0x%08lx at 0x%08lx can not "
+		       "be mapped using pages, ignoring.\n",
+		       __pfn_to_phys(md->pfn), md->virtual);
+		return;
+	}
+
+	while ((virt & 0xfffff || (virt + off) & 0xfffff) && length >= PAGE_SIZE) {
+		alloc_init_page(virt, virt + off, prot_l1, prot_pte);
+
+		virt   += PAGE_SIZE;
+		length -= PAGE_SIZE;
+	}
+
+	/* N.B.	ARMv6 supersections are only defined to work with domain 0.
+	 *	Since domain assignments can in fact be arbitrary, the
+	 *	'domain == 0' check below is required to insure that ARMv6
+	 *	supersections are only allocated for domain 0 regardless
+	 *	of the actual domain assignments in use.
+	 */
+	if ((cpu_architecture() >= CPU_ARCH_ARMv6 || cpu_is_xsc3())
+		&& domain == 0) {
+		/*
+		 * Align to supersection boundary if !high pages.
+		 * High pages have already been checked for proper
+		 * alignment above and they will fail the SUPSERSECTION_MASK
+		 * check because of the way the address is encoded into
+		 * offset.
+		 */
+		if (md->pfn <= 0x100000) {
+			while ((virt & ~SUPERSECTION_MASK ||
+			        (virt + off) & ~SUPERSECTION_MASK) &&
+				length >= (PGDIR_SIZE / 2)) {
+				alloc_init_section(virt, virt + off, prot_sect);
+
+				virt   += (PGDIR_SIZE / 2);
+				length -= (PGDIR_SIZE / 2);
+			}
+		}
+
+		while (length >= SUPERSECTION_SIZE) {
+			alloc_init_supersection(virt, virt + off, prot_sect);
+
+			virt   += SUPERSECTION_SIZE;
+			length -= SUPERSECTION_SIZE;
+		}
+	}
+
+	/*
+	 * A section mapping covers half a "pgdir" entry.
+	 */
+	while (length >= (PGDIR_SIZE / 2)) {
+		alloc_init_section(virt, virt + off, prot_sect);
+
+		virt   += (PGDIR_SIZE / 2);
+		length -= (PGDIR_SIZE / 2);
+	}
+
+	while (length >= PAGE_SIZE) {
+		alloc_init_page(virt, virt + off, prot_l1, prot_pte);
+
+		virt   += PAGE_SIZE;
+		length -= PAGE_SIZE;
+	}
+}
+
+/*
+ * Create the architecture specific mappings
+ */
+void __init iotable_init(struct map_desc *io_desc, int nr)
+{
+	int i;
+
+	for (i = 0; i < nr; i++)
+		create_mapping(io_desc + i);
+}
+
+static inline void prepare_page_table(struct meminfo *mi)
+{
+	unsigned long addr;
+
+	/*
+	 * Clear out all the mappings below the kernel image.
+	 */
+	for (addr = 0; addr < MODULE_START; addr += PGDIR_SIZE)
+		pmd_clear(pmd_off_k(addr));
+
+#ifdef CONFIG_XIP_KERNEL
+	/* The XIP kernel is mapped in the module area -- skip over it */
+	addr = ((unsigned long)&_etext + PGDIR_SIZE - 1) & PGDIR_MASK;
+#endif
+	for ( ; addr < PAGE_OFFSET; addr += PGDIR_SIZE)
+		pmd_clear(pmd_off_k(addr));
+
+	/*
+	 * Clear out all the kernel space mappings, except for the first
+	 * memory bank, up to the end of the vmalloc region.
+	 */
+	for (addr = __phys_to_virt(mi->bank[0].start + mi->bank[0].size);
+	     addr < VMALLOC_END; addr += PGDIR_SIZE)
+		pmd_clear(pmd_off_k(addr));
+}
+
+/*
+ * Reserve the various regions of node 0
+ */
+void __init reserve_node_zero(pg_data_t *pgdat)
+{
+	unsigned long res_size = 0;
+
+	/*
+	 * Register the kernel text and data with bootmem.
+	 * Note that this can only be in node 0.
+	 */
+#ifdef CONFIG_XIP_KERNEL
+	reserve_bootmem_node(pgdat, __pa(&__data_start), &_end - &__data_start);
+#else
+	reserve_bootmem_node(pgdat, __pa(&_stext), &_end - &_stext);
+#endif
+
+	/*
+	 * Reserve the page tables.  These are already in use,
+	 * and can only be in node 0.
+	 */
+	reserve_bootmem_node(pgdat, __pa(swapper_pg_dir),
+			     PTRS_PER_PGD * sizeof(pgd_t));
+
+	/*
+	 * Hmm... This should go elsewhere, but we really really need to
+	 * stop things allocating the low memory; ideally we need a better
+	 * implementation of GFP_DMA which does not assume that DMA-able
+	 * memory starts at zero.
+	 */
+	if (machine_is_integrator() || machine_is_cintegrator())
+		res_size = __pa(swapper_pg_dir) - PHYS_OFFSET;
+
+	/*
+	 * These should likewise go elsewhere.  They pre-reserve the
+	 * screen memory region at the start of main system memory.
+	 */
+	if (machine_is_edb7211())
+		res_size = 0x00020000;
+	if (machine_is_p720t())
+		res_size = 0x00014000;
+
+#ifdef CONFIG_SA1111
+	/*
+	 * Because of the SA1111 DMA bug, we want to preserve our
+	 * precious DMA-able memory...
+	 */
+	res_size = __pa(swapper_pg_dir) - PHYS_OFFSET;
+#endif
+	if (res_size)
+		reserve_bootmem_node(pgdat, PHYS_OFFSET, res_size);
+}
+
+/*
+ * Set up device the mappings.  Since we clear out the page tables for all
+ * mappings above VMALLOC_END, we will remove any debug device mappings.
+ * This means you have to be careful how you debug this function, or any
+ * called function.  This means you can't use any function or debugging
+ * method which may touch any device, otherwise the kernel _will_ crash.
+ */
+static void __init devicemaps_init(struct machine_desc *mdesc)
+{
+	struct map_desc map;
+	unsigned long addr;
+	void *vectors;
+
+	/*
+	 * Allocate the vector page early.
+	 */
+	vectors = alloc_bootmem_low_pages(PAGE_SIZE);
+	BUG_ON(!vectors);
+
+	for (addr = VMALLOC_END; addr; addr += PGDIR_SIZE)
+		pmd_clear(pmd_off_k(addr));
+
+	/*
+	 * Map the kernel if it is XIP.
+	 * It is always first in the modulearea.
+	 */
+#ifdef CONFIG_XIP_KERNEL
+	map.pfn = __phys_to_pfn(CONFIG_XIP_PHYS_ADDR & SECTION_MASK);
+	map.virtual = MODULE_START;
+	map.length = ((unsigned long)&_etext - map.virtual + ~SECTION_MASK) & SECTION_MASK;
+	map.type = MT_ROM;
+	create_mapping(&map);
+#endif
+
+	/*
+	 * Map the cache flushing regions.
+	 */
+#ifdef FLUSH_BASE
+	map.pfn = __phys_to_pfn(FLUSH_BASE_PHYS);
+	map.virtual = FLUSH_BASE;
+	map.length = SZ_1M;
+	map.type = MT_CACHECLEAN;
+	create_mapping(&map);
+#endif
+#ifdef FLUSH_BASE_MINICACHE
+	map.pfn = __phys_to_pfn(FLUSH_BASE_PHYS + SZ_1M);
+	map.virtual = FLUSH_BASE_MINICACHE;
+	map.length = SZ_1M;
+	map.type = MT_MINICLEAN;
+	create_mapping(&map);
+#endif
+
+	/*
+	 * Create a mapping for the machine vectors at the high-vectors
+	 * location (0xffff0000).  If we aren't using high-vectors, also
+	 * create a mapping at the low-vectors virtual address.
+	 */
+	map.pfn = __phys_to_pfn(virt_to_phys(vectors));
+	map.virtual = 0xffff0000;
+	map.length = PAGE_SIZE;
+	map.type = MT_HIGH_VECTORS;
+	create_mapping(&map);
+
+	if (!vectors_high()) {
+		map.virtual = 0;
+		map.type = MT_LOW_VECTORS;
+		create_mapping(&map);
+	}
+
+	/*
+	 * Ask the machine support to map in the statically mapped devices.
+	 */
+	if (mdesc->map_io)
+		mdesc->map_io();
+
+	/*
+	 * Finally flush the caches and tlb to ensure that we're in a
+	 * consistent state wrt the writebuffer.  This also ensures that
+	 * any write-allocated cache lines in the vector page are written
+	 * back.  After this point, we can start to touch devices again.
+	 */
+	local_flush_tlb_all();
+	flush_cache_all();
+}
+
+/*
+ * paging_init() sets up the page tables, initialises the zone memory
+ * maps, and sets up the zero page, bad page and bad page tables.
+ */
+void __init paging_init(struct meminfo *mi, struct machine_desc *mdesc)
+{
+	void *zero_page;
+
+	build_mem_type_table();
+	prepare_page_table(mi);
+	bootmem_init(mi);
+	devicemaps_init(mdesc);
+
+	top_pmd = pmd_off_k(0xffff0000);
+
+	/*
+	 * allocate the zero page.  Note that we count on this going ok.
+	 */
+	zero_page = alloc_bootmem_low_pages(PAGE_SIZE);
+	memzero(zero_page, PAGE_SIZE);
+	empty_zero_page = virt_to_page(zero_page);
+	flush_dcache_page(empty_zero_page);
+}
+
+/*
+ * In order to soft-boot, we need to insert a 1:1 mapping in place of
+ * the user-mode pages.  This will then ensure that we have predictable
+ * results when turning the mmu off
+ */
+void setup_mm_for_reboot(char mode)
+{
+	unsigned long base_pmdval;
+	pgd_t *pgd;
+	int i;
+
+	if (current->mm && current->mm->pgd)
+		pgd = current->mm->pgd;
+	else
+		pgd = init_mm.pgd;
+
+	base_pmdval = PMD_SECT_AP_WRITE | PMD_SECT_AP_READ | PMD_TYPE_SECT;
+	if (cpu_architecture() <= CPU_ARCH_ARMv5TEJ && !cpu_is_xscale())
+		base_pmdval |= PMD_BIT4;
+
+	for (i = 0; i < FIRST_USER_PGD_NR + USER_PTRS_PER_PGD; i++, pgd++) {
+		unsigned long pmdval = (i << PGDIR_SHIFT) | base_pmdval;
+		pmd_t *pmd;
 
-	mm->context.id = asid;
+		pmd = pmd_off(pgd, i << PGDIR_SHIFT);
+		pmd[0] = __pmd(pmdval);
+		pmd[1] = __pmd(pmdval + (1 << (PGDIR_SHIFT - 1)));
+		flush_pmd_entry(pmd);
+	}
 }
diff --git a/arch/arm/mm/nommu.c b/arch/arm/mm/nommu.c
index 1464ed817b5d..d0e66424a597 100644
--- a/arch/arm/mm/nommu.c
+++ b/arch/arm/mm/nommu.c
@@ -11,6 +11,49 @@
 #include <asm/io.h>
 #include <asm/page.h>
 
+#include "mm.h"
+
+extern void _stext, __data_start, _end;
+
+/*
+ * Reserve the various regions of node 0
+ */
+void __init reserve_node_zero(pg_data_t *pgdat)
+{
+	/*
+	 * Register the kernel text and data with bootmem.
+	 * Note that this can only be in node 0.
+	 */
+#ifdef CONFIG_XIP_KERNEL
+	reserve_bootmem_node(pgdat, __pa(&__data_start), &_end - &__data_start);
+#else
+	reserve_bootmem_node(pgdat, __pa(&_stext), &_end - &_stext);
+#endif
+
+	/*
+	 * Register the exception vector page.
+	 * some architectures which the DRAM is the exception vector to trap,
+	 * alloc_page breaks with error, although it is not NULL, but "0."
+	 */
+	reserve_bootmem_node(pgdat, CONFIG_VECTORS_BASE, PAGE_SIZE);
+}
+
+/*
+ * paging_init() sets up the page tables, initialises the zone memory
+ * maps, and sets up the zero page, bad page and bad page tables.
+ */
+void __init paging_init(struct meminfo *mi, struct machine_desc *mdesc)
+{
+	bootmem_init(mi);
+}
+
+/*
+ * We don't need to do anything here for nommu machines.
+ */
+void setup_mm_for_reboot(char mode)
+{
+}
+
 void flush_dcache_page(struct page *page)
 {
 	__cpuc_flush_dcache_page(page_address(page));
diff --git a/arch/arm/mm/pgd.c b/arch/arm/mm/pgd.c
new file mode 100644
index 000000000000..20c1b0df75f2
--- /dev/null
+++ b/arch/arm/mm/pgd.c
@@ -0,0 +1,101 @@
+/*
+ *  linux/arch/arm/mm/pgd.c
+ *
+ *  Copyright (C) 1998-2005 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/mm.h>
+#include <linux/highmem.h>
+
+#include <asm/pgalloc.h>
+#include <asm/page.h>
+#include <asm/tlbflush.h>
+
+#include "mm.h"
+
+#define FIRST_KERNEL_PGD_NR	(FIRST_USER_PGD_NR + USER_PTRS_PER_PGD)
+
+/*
+ * need to get a 16k page for level 1
+ */
+pgd_t *get_pgd_slow(struct mm_struct *mm)
+{
+	pgd_t *new_pgd, *init_pgd;
+	pmd_t *new_pmd, *init_pmd;
+	pte_t *new_pte, *init_pte;
+
+	new_pgd = (pgd_t *)__get_free_pages(GFP_KERNEL, 2);
+	if (!new_pgd)
+		goto no_pgd;
+
+	memzero(new_pgd, FIRST_KERNEL_PGD_NR * sizeof(pgd_t));
+
+	/*
+	 * Copy over the kernel and IO PGD entries
+	 */
+	init_pgd = pgd_offset_k(0);
+	memcpy(new_pgd + FIRST_KERNEL_PGD_NR, init_pgd + FIRST_KERNEL_PGD_NR,
+		       (PTRS_PER_PGD - FIRST_KERNEL_PGD_NR) * sizeof(pgd_t));
+
+	clean_dcache_area(new_pgd, PTRS_PER_PGD * sizeof(pgd_t));
+
+	if (!vectors_high()) {
+		/*
+		 * On ARM, first page must always be allocated since it
+		 * contains the machine vectors.
+		 */
+		new_pmd = pmd_alloc(mm, new_pgd, 0);
+		if (!new_pmd)
+			goto no_pmd;
+
+		new_pte = pte_alloc_map(mm, new_pmd, 0);
+		if (!new_pte)
+			goto no_pte;
+
+		init_pmd = pmd_offset(init_pgd, 0);
+		init_pte = pte_offset_map_nested(init_pmd, 0);
+		set_pte(new_pte, *init_pte);
+		pte_unmap_nested(init_pte);
+		pte_unmap(new_pte);
+	}
+
+	return new_pgd;
+
+no_pte:
+	pmd_free(new_pmd);
+no_pmd:
+	free_pages((unsigned long)new_pgd, 2);
+no_pgd:
+	return NULL;
+}
+
+void free_pgd_slow(pgd_t *pgd)
+{
+	pmd_t *pmd;
+	struct page *pte;
+
+	if (!pgd)
+		return;
+
+	/* pgd is always present and good */
+	pmd = pmd_off(pgd, 0);
+	if (pmd_none(*pmd))
+		goto free;
+	if (pmd_bad(*pmd)) {
+		pmd_ERROR(*pmd);
+		pmd_clear(pmd);
+		goto free;
+	}
+
+	pte = pmd_page(*pmd);
+	pmd_clear(pmd);
+	dec_zone_page_state(virt_to_page((unsigned long *)pgd), NR_PAGETABLE);
+	pte_lock_deinit(pte);
+	pte_free(pte);
+	pmd_free(pmd);
+free:
+	free_pages((unsigned long) pgd, 2);
+}
diff --git a/arch/arm/mm/proc-arm740.S b/arch/arm/mm/proc-arm740.S
new file mode 100644
index 000000000000..40713818a87b
--- /dev/null
+++ b/arch/arm/mm/proc-arm740.S
@@ -0,0 +1,174 @@
+/*
+ *  linux/arch/arm/mm/arm740.S: utility functions for ARM740
+ *
+ *  Copyright (C) 2004-2006 Hyok S. Choi (hyok.choi@samsung.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <asm/assembler.h>
+#include <asm/asm-offsets.h>
+#include <asm/pgtable-hwdef.h>
+#include <asm/pgtable.h>
+#include <asm/procinfo.h>
+#include <asm/ptrace.h>
+
+	.text
+/*
+ * cpu_arm740_proc_init()
+ * cpu_arm740_do_idle()
+ * cpu_arm740_dcache_clean_area()
+ * cpu_arm740_switch_mm()
+ *
+ * These are not required.
+ */
+ENTRY(cpu_arm740_proc_init)
+ENTRY(cpu_arm740_do_idle)
+ENTRY(cpu_arm740_dcache_clean_area)
+ENTRY(cpu_arm740_switch_mm)
+	mov	pc, lr
+
+/*
+ * cpu_arm740_proc_fin()
+ */
+ENTRY(cpu_arm740_proc_fin)
+	stmfd	sp!, {lr}
+	mov	ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
+	msr	cpsr_c, ip
+	mrc	p15, 0, r0, c1, c0, 0
+	bic	r0, r0, #0x3f000000		@ bank/f/lock/s
+	bic	r0, r0, #0x0000000c		@ w-buffer/cache
+	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
+	mcr	p15, 0, r0, c7, c0, 0		@ invalidate cache
+	ldmfd	sp!, {pc}
+
+/*
+ * cpu_arm740_reset(loc)
+ * Params  : r0 = address to jump to
+ * Notes   : This sets up everything for a reset
+ */
+ENTRY(cpu_arm740_reset)
+	mov	ip, #0
+	mcr	p15, 0, ip, c7, c0, 0		@ invalidate cache
+	mrc	p15, 0, ip, c1, c0, 0		@ get ctrl register
+	bic	ip, ip, #0x0000000c		@ ............wc..
+	mcr	p15, 0, ip, c1, c0, 0		@ ctrl register
+	mov	pc, r0
+
+	__INIT
+
+	.type	__arm740_setup, #function
+__arm740_setup:
+	mov	r0, #0
+	mcr	p15, 0, r0, c7, c0, 0		@ invalidate caches
+
+	mcr	p15, 0, r0, c6, c3		@ disable area 3~7
+	mcr	p15, 0, r0, c6, c4
+	mcr	p15, 0, r0, c6, c5
+	mcr	p15, 0, r0, c6, c6
+	mcr	p15, 0, r0, c6, c7
+
+	mov	r0, #0x0000003F			@ base = 0, size = 4GB
+	mcr	p15, 0, r0, c6,	c0		@ set area 0, default
+
+	ldr	r0, =(CONFIG_DRAM_BASE & 0xFFFFF000) @ base[31:12] of RAM
+	ldr	r1, =(CONFIG_DRAM_SIZE >> 12)	@ size of RAM (must be >= 4KB)
+	mov	r2, #10				@ 11 is the minimum (4KB)
+1:	add	r2, r2, #1			@ area size *= 2
+	mov	r1, r1, lsr #1
+	bne	1b				@ count not zero r-shift
+	orr	r0, r0, r2, lsl #1		@ the area register value
+	orr	r0, r0, #1			@ set enable bit
+	mcr	p15, 0, r0, c6,	c1		@ set area 1, RAM
+
+	ldr	r0, =(CONFIG_FLASH_MEM_BASE & 0xFFFFF000) @ base[31:12] of FLASH
+	ldr	r1, =(CONFIG_FLASH_SIZE >> 12)	@ size of FLASH (must be >= 4KB)
+	mov	r2, #10				@ 11 is the minimum (4KB)
+1:	add	r2, r2, #1			@ area size *= 2
+	mov	r1, r1, lsr #1
+	bne	1b				@ count not zero r-shift
+	orr	r0, r0, r2, lsl #1		@ the area register value
+	orr	r0, r0, #1			@ set enable bit
+	mcr	p15, 0, r0, c6,	c2		@ set area 2, ROM/FLASH
+
+	mov	r0, #0x06
+	mcr	p15, 0, r0, c2, c0		@ Region 1&2 cacheable
+#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
+	mov	r0, #0x00			@ disable whole write buffer
+#else
+	mov	r0, #0x02			@ Region 1 write bufferred
+#endif
+	mcr	p15, 0, r0, c3, c0
+
+	mov	r0, #0x10000
+	sub	r0, r0, #1			@ r0 = 0xffff
+	mcr	p15, 0, r0, c5, c0		@ all read/write access
+
+	mrc	p15, 0, r0, c1, c0		@ get control register
+	bic	r0, r0, #0x3F000000		@ set to standard caching mode
+						@ need some benchmark
+	orr	r0, r0, #0x0000000d		@ MPU/Cache/WB
+
+	mov	pc, lr
+
+	.size	__arm740_setup, . - __arm740_setup
+
+	__INITDATA
+
+/*
+ * Purpose : Function pointers used to access above functions - all calls
+ *	     come through these
+ */
+	.type	arm740_processor_functions, #object
+ENTRY(arm740_processor_functions)
+	.word	v4t_late_abort
+	.word	cpu_arm740_proc_init
+	.word	cpu_arm740_proc_fin
+	.word	cpu_arm740_reset
+	.word   cpu_arm740_do_idle
+	.word	cpu_arm740_dcache_clean_area
+	.word	cpu_arm740_switch_mm
+	.word	0			@ cpu_*_set_pte
+	.size	arm740_processor_functions, . - arm740_processor_functions
+
+	.section ".rodata"
+
+	.type	cpu_arch_name, #object
+cpu_arch_name:
+	.asciz	"armv4"
+	.size	cpu_arch_name, . - cpu_arch_name
+
+	.type	cpu_elf_name, #object
+cpu_elf_name:
+	.asciz	"v4"
+	.size	cpu_elf_name, . - cpu_elf_name
+
+	.type	cpu_arm740_name, #object
+cpu_arm740_name:
+	.ascii	"ARM740T"
+	.size	cpu_arm740_name, . - cpu_arm740_name
+
+	.align
+
+	.section ".proc.info.init", #alloc, #execinstr
+	.type	__arm740_proc_info,#object
+__arm740_proc_info:
+	.long	0x41807400
+	.long	0xfffffff0
+	.long	0
+	b	__arm740_setup
+	.long	cpu_arch_name
+	.long	cpu_elf_name
+	.long	HWCAP_SWP | HWCAP_HALF | HWCAP_26BIT
+	.long	cpu_arm740_name
+	.long	arm740_processor_functions
+	.long	0
+	.long	0
+	.long	v3_cache_fns			@ cache model
+	.size	__arm740_proc_info, . - __arm740_proc_info
+
+
diff --git a/arch/arm/mm/proc-arm7tdmi.S b/arch/arm/mm/proc-arm7tdmi.S
new file mode 100644
index 000000000000..22d7e3100ea6
--- /dev/null
+++ b/arch/arm/mm/proc-arm7tdmi.S
@@ -0,0 +1,249 @@
+/*
+ *  linux/arch/arm/mm/proc-arm7tdmi.S: utility functions for ARM7TDMI
+ *
+ *  Copyright (C) 2003-2006 Hyok S. Choi <hyok.choi@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <asm/assembler.h>
+#include <asm/asm-offsets.h>
+#include <asm/pgtable-hwdef.h>
+#include <asm/pgtable.h>
+#include <asm/procinfo.h>
+#include <asm/ptrace.h>
+
+	.text
+/*
+ * cpu_arm7tdmi_proc_init()
+ * cpu_arm7tdmi_do_idle()
+ * cpu_arm7tdmi_dcache_clean_area()
+ * cpu_arm7tdmi_switch_mm()
+ *
+ * These are not required.
+ */
+ENTRY(cpu_arm7tdmi_proc_init)
+ENTRY(cpu_arm7tdmi_do_idle)
+ENTRY(cpu_arm7tdmi_dcache_clean_area)
+ENTRY(cpu_arm7tdmi_switch_mm)
+		mov	pc, lr
+
+/*
+ * cpu_arm7tdmi_proc_fin()
+ */
+ENTRY(cpu_arm7tdmi_proc_fin)
+		mov	r0, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
+		msr	cpsr_c, r0
+		mov	pc, lr
+
+/*
+ * Function: cpu_arm7tdmi_reset(loc)
+ * Params  : loc(r0)	address to jump to
+ * Purpose : Sets up everything for a reset and jump to the location for soft reset.
+ */
+ENTRY(cpu_arm7tdmi_reset)
+		mov	pc, r0
+
+		__INIT
+
+		.type	__arm7tdmi_setup, #function
+__arm7tdmi_setup:
+		mov	pc, lr
+		.size	__arm7tdmi_setup, . - __arm7tdmi_setup
+
+		__INITDATA
+
+/*
+ * Purpose : Function pointers used to access above functions - all calls
+ *	     come through these
+ */
+		.type	arm7tdmi_processor_functions, #object
+ENTRY(arm7tdmi_processor_functions)
+		.word	v4t_late_abort
+		.word	cpu_arm7tdmi_proc_init
+		.word	cpu_arm7tdmi_proc_fin
+		.word	cpu_arm7tdmi_reset
+		.word	cpu_arm7tdmi_do_idle
+		.word	cpu_arm7tdmi_dcache_clean_area
+		.word	cpu_arm7tdmi_switch_mm
+		.word	0		@ cpu_*_set_pte
+		.size	arm7tdmi_processor_functions, . - arm7tdmi_processor_functions
+
+		.section ".rodata"
+
+		.type	cpu_arch_name, #object
+cpu_arch_name:
+		.asciz	"armv4t"
+		.size	cpu_arch_name, . - cpu_arch_name
+
+		.type	cpu_elf_name, #object
+cpu_elf_name:
+		.asciz	"v4"
+		.size	cpu_elf_name, . - cpu_elf_name
+
+		.type	cpu_arm7tdmi_name, #object
+cpu_arm7tdmi_name:
+		.asciz	"ARM7TDMI"
+		.size	cpu_arm7tdmi_name, . - cpu_arm7tdmi_name
+
+		.type	cpu_triscenda7_name, #object
+cpu_triscenda7_name:
+		.asciz	"Triscend-A7x"
+		.size	cpu_triscenda7_name, . - cpu_triscenda7_name
+
+		.type	cpu_at91_name, #object
+cpu_at91_name:
+		.asciz	"Atmel-AT91M40xxx"
+		.size	cpu_at91_name, . - cpu_at91_name
+
+		.type	cpu_s3c3410_name, #object
+cpu_s3c3410_name:
+		.asciz	"Samsung-S3C3410"
+		.size	cpu_s3c3410_name, . - cpu_s3c3410_name
+
+		.type	cpu_s3c44b0x_name, #object
+cpu_s3c44b0x_name:
+		.asciz	"Samsung-S3C44B0x"
+		.size	cpu_s3c44b0x_name, . - cpu_s3c44b0x_name
+
+		.type	cpu_s3c4510b, #object
+cpu_s3c4510b_name:
+		.asciz	"Samsung-S3C4510B"
+		.size	cpu_s3c4510b_name, . - cpu_s3c4510b_name
+
+		.type	cpu_s3c4530_name, #object
+cpu_s3c4530_name:
+		.asciz	"Samsung-S3C4530"
+		.size	cpu_s3c4530_name, . - cpu_s3c4530_name
+
+		.type	cpu_netarm_name, #object
+cpu_netarm_name:
+		.asciz	"NETARM"
+		.size	cpu_netarm_name, . - cpu_netarm_name
+
+		.align
+
+		.section ".proc.info.init", #alloc, #execinstr
+
+		.type	__arm7tdmi_proc_info, #object
+__arm7tdmi_proc_info:
+		.long	0x41007700
+		.long	0xfff8ff00
+		.long	0
+		.long	0
+		b	__arm7tdmi_setup
+		.long	cpu_arch_name
+		.long	cpu_elf_name
+		.long	HWCAP_SWP | HWCAP_26BIT
+		.long	cpu_arm7tdmi_name
+		.long	arm7tdmi_processor_functions
+		.long	0
+		.long	0
+		.long	v4_cache_fns
+		.size	__arm7tdmi_proc_info, . - __arm7dmi_proc_info
+
+		.type	__triscenda7_proc_info, #object
+__triscenda7_proc_info:
+		.long	0x0001d2ff
+		.long	0x0001ffff
+		.long	0
+		.long	0
+		b	__arm7tdmi_setup
+		.long	cpu_arch_name
+		.long	cpu_elf_name
+		.long	HWCAP_SWP | HWCAP_THUMB | HWCAP_26BIT
+		.long	cpu_triscenda7_name
+		.long	arm7tdmi_processor_functions
+		.long	0
+		.long	0
+		.long	v4_cache_fns
+		.size	__triscenda7_proc_info, . - __triscenda7_proc_info
+
+		.type	__at91_proc_info, #object
+__at91_proc_info:
+		.long	0x14000040
+		.long	0xfff000e0
+		.long	0
+		.long	0
+		b	__arm7tdmi_setup
+		.long	cpu_arch_name
+		.long	cpu_elf_name
+		.long	HWCAP_SWP | HWCAP_THUMB | HWCAP_26BIT
+		.long	cpu_at91_name
+		.long	arm7tdmi_processor_functions
+		.long	0
+		.long	0
+		.long	v4_cache_fns
+		.size	__at91_proc_info, . - __at91_proc_info
+
+		.type	__s3c4510b_proc_info, #object
+__s3c4510b_proc_info:
+		.long	0x36365000
+		.long	0xfffff000
+		.long	0
+		.long	0
+		b	__arm7tdmi_setup
+		.long	cpu_arch_name
+		.long	cpu_elf_name
+		.long	HWCAP_SWP | HWCAP_THUMB | HWCAP_26BIT
+		.long	cpu_s3c4510b_name
+		.long	arm7tdmi_processor_functions
+		.long	0
+		.long	0
+		.long	v4_cache_fns
+		.size	__s3c4510b_proc_info, . - __s3c4510b_proc_info
+
+		.type	__s3c4530_proc_info, #object
+__s3c4530_proc_info:
+		.long	0x4c000000
+		.long	0xfff000e0
+		.long	0
+		.long	0
+		b	__arm7tdmi_setup
+		.long	cpu_arch_name
+		.long	cpu_elf_name
+		.long	HWCAP_SWP | HWCAP_THUMB | HWCAP_26BIT
+		.long	cpu_s3c4530_name
+		.long	arm7tdmi_processor_functions
+		.long	0
+		.long	0
+		.long	v4_cache_fns
+		.size	__s3c4530_proc_info, . - __s3c4530_proc_info
+
+		.type	__s3c3410_proc_info, #object
+__s3c3410_proc_info:
+		.long	0x34100000
+		.long	0xffff0000
+		.long	0
+		.long	0
+		b	__arm7tdmi_setup
+		.long	cpu_arch_name
+		.long	cpu_elf_name
+		.long	HWCAP_SWP | HWCAP_THUMB | HWCAP_26BIT
+		.long	cpu_s3c3410_name
+		.long	arm7tdmi_processor_functions
+		.long	0
+		.long	0
+		.long	v4_cache_fns
+		.size	__s3c3410_proc_info, . - __s3c3410_proc_info
+
+		.type	__s3c44b0x_proc_info, #object
+__s3c44b0x_proc_info:
+		.long	0x44b00000
+		.long	0xffff0000
+		.long	0
+		.long	0
+		b	__arm7tdmi_setup
+		.long	cpu_arch_name
+		.long	cpu_elf_name
+		.long	HWCAP_SWP | HWCAP_THUMB | HWCAP_26BIT
+		.long	cpu_s3c44b0x_name
+		.long	arm7tdmi_processor_functions
+		.long	0
+		.long	0
+		.long	v4_cache_fns
+		.size	__s3c44b0x_proc_info, . - __s3c44b0x_proc_info
diff --git a/arch/arm/mm/proc-arm940.S b/arch/arm/mm/proc-arm940.S
new file mode 100644
index 000000000000..2397f4b6e151
--- /dev/null
+++ b/arch/arm/mm/proc-arm940.S
@@ -0,0 +1,369 @@
+/*
+ *  linux/arch/arm/mm/arm940.S: utility functions for ARM940T
+ *
+ *  Copyright (C) 2004-2006 Hyok S. Choi (hyok.choi@samsung.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <asm/assembler.h>
+#include <asm/pgtable-hwdef.h>
+#include <asm/pgtable.h>
+#include <asm/procinfo.h>
+#include <asm/ptrace.h>
+
+/* ARM940T has a 4KB DCache comprising 256 lines of 4 words */
+#define CACHE_DLINESIZE	16
+#define CACHE_DSEGMENTS	4
+#define CACHE_DENTRIES	64
+
+	.text
+/*
+ * cpu_arm940_proc_init()
+ * cpu_arm940_switch_mm()
+ *
+ * These are not required.
+ */
+ENTRY(cpu_arm940_proc_init)
+ENTRY(cpu_arm940_switch_mm)
+	mov	pc, lr
+
+/*
+ * cpu_arm940_proc_fin()
+ */
+ENTRY(cpu_arm940_proc_fin)
+	stmfd	sp!, {lr}
+	mov	ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
+	msr	cpsr_c, ip
+	bl	arm940_flush_kern_cache_all
+	mrc	p15, 0, r0, c1, c0, 0		@ ctrl register
+	bic	r0, r0, #0x00001000		@ i-cache
+	bic	r0, r0, #0x00000004		@ d-cache
+	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
+	ldmfd	sp!, {pc}
+
+/*
+ * cpu_arm940_reset(loc)
+ * Params  : r0 = address to jump to
+ * Notes   : This sets up everything for a reset
+ */
+ENTRY(cpu_arm940_reset)
+	mov	ip, #0
+	mcr	p15, 0, ip, c7, c5, 0		@ flush I cache
+	mcr	p15, 0, ip, c7, c6, 0		@ flush D cache
+	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
+	mrc	p15, 0, ip, c1, c0, 0		@ ctrl register
+	bic	ip, ip, #0x00000005		@ .............c.p
+	bic	ip, ip, #0x00001000		@ i-cache
+	mcr	p15, 0, ip, c1, c0, 0		@ ctrl register
+	mov	pc, r0
+
+/*
+ * cpu_arm940_do_idle()
+ */
+	.align	5
+ENTRY(cpu_arm940_do_idle)
+	mcr	p15, 0, r0, c7, c0, 4		@ Wait for interrupt
+	mov	pc, lr
+
+/*
+ *	flush_user_cache_all()
+ */
+ENTRY(arm940_flush_user_cache_all)
+	/* FALLTHROUGH */
+
+/*
+ *	flush_kern_cache_all()
+ *
+ *	Clean and invalidate the entire cache.
+ */
+ENTRY(arm940_flush_kern_cache_all)
+	mov	r2, #VM_EXEC
+	/* FALLTHROUGH */
+
+/*
+ *	flush_user_cache_range(start, end, flags)
+ *
+ *	There is no efficient way to flush a range of cache entries
+ *	in the specified address range. Thus, flushes all.
+ *
+ *	- start	- start address (inclusive)
+ *	- end	- end address (exclusive)
+ *	- flags	- vm_flags describing address space
+ */
+ENTRY(arm940_flush_user_cache_range)
+	mov	ip, #0
+#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
+	mcr	p15, 0, ip, c7, c6, 0		@ flush D cache
+#else
+	mov	r1, #(CACHE_DSEGMENTS - 1) << 4	@ 4 segments
+1:	orr	r3, r1, #(CACHE_DENTRIES - 1) << 26 @ 64 entries
+2:	mcr	p15, 0, r3, c7, c14, 2		@ clean/flush D index
+	subs	r3, r3, #1 << 26
+	bcs	2b				@ entries 63 to 0
+	subs	r1, r1, #1 << 4
+	bcs	1b				@ segments 3 to 0
+#endif
+	tst	r2, #VM_EXEC
+	mcrne	p15, 0, ip, c7, c5, 0		@ invalidate I cache
+	mcrne	p15, 0, ip, c7, c10, 4		@ drain WB
+	mov	pc, lr
+
+/*
+ *	coherent_kern_range(start, end)
+ *
+ *	Ensure coherency between the Icache and the Dcache in the
+ *	region described by start, end.  If you have non-snooping
+ *	Harvard caches, you need to implement this function.
+ *
+ *	- start	- virtual start address
+ *	- end	- virtual end address
+ */
+ENTRY(arm940_coherent_kern_range)
+	/* FALLTHROUGH */
+
+/*
+ *	coherent_user_range(start, end)
+ *
+ *	Ensure coherency between the Icache and the Dcache in the
+ *	region described by start, end.  If you have non-snooping
+ *	Harvard caches, you need to implement this function.
+ *
+ *	- start	- virtual start address
+ *	- end	- virtual end address
+ */
+ENTRY(arm940_coherent_user_range)
+	/* FALLTHROUGH */
+
+/*
+ *	flush_kern_dcache_page(void *page)
+ *
+ *	Ensure no D cache aliasing occurs, either with itself or
+ *	the I cache
+ *
+ *	- addr	- page aligned address
+ */
+ENTRY(arm940_flush_kern_dcache_page)
+	mov	ip, #0
+	mov	r1, #(CACHE_DSEGMENTS - 1) << 4	@ 4 segments
+1:	orr	r3, r1, #(CACHE_DENTRIES - 1) << 26 @ 64 entries
+2:	mcr	p15, 0, r3, c7, c14, 2		@ clean/flush D index
+	subs	r3, r3, #1 << 26
+	bcs	2b				@ entries 63 to 0
+	subs	r1, r1, #1 << 4
+	bcs	1b				@ segments 7 to 0
+	mcr	p15, 0, ip, c7, c5, 0		@ invalidate I cache
+	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
+	mov	pc, lr
+
+/*
+ *	dma_inv_range(start, end)
+ *
+ *	There is no efficient way to invalidate a specifid virtual
+ *	address range. Thus, invalidates all.
+ *
+ *	- start	- virtual start address
+ *	- end	- virtual end address
+ */
+ENTRY(arm940_dma_inv_range)
+	mov	ip, #0
+	mov	r1, #(CACHE_DSEGMENTS - 1) << 4	@ 4 segments
+1:	orr	r3, r1, #(CACHE_DENTRIES - 1) << 26 @ 64 entries
+2:	mcr	p15, 0, r3, c7, c6, 2		@ flush D entry
+	subs	r3, r3, #1 << 26
+	bcs	2b				@ entries 63 to 0
+	subs	r1, r1, #1 << 4
+	bcs	1b				@ segments 7 to 0
+	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
+	mov	pc, lr
+
+/*
+ *	dma_clean_range(start, end)
+ *
+ *	There is no efficient way to clean a specifid virtual
+ *	address range. Thus, cleans all.
+ *
+ *	- start	- virtual start address
+ *	- end	- virtual end address
+ */
+ENTRY(arm940_dma_clean_range)
+ENTRY(cpu_arm940_dcache_clean_area)
+	mov	ip, #0
+#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
+	mov	r1, #(CACHE_DSEGMENTS - 1) << 4	@ 4 segments
+1:	orr	r3, r1, #(CACHE_DENTRIES - 1) << 26 @ 64 entries
+2:	mcr	p15, 0, r3, c7, c10, 2		@ clean D entry
+	subs	r3, r3, #1 << 26
+	bcs	2b				@ entries 63 to 0
+	subs	r1, r1, #1 << 4
+	bcs	1b				@ segments 7 to 0
+#endif
+	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
+	mov	pc, lr
+
+/*
+ *	dma_flush_range(start, end)
+ *
+ *	There is no efficient way to clean and invalidate a specifid
+ *	virtual address range.
+ *
+ *	- start	- virtual start address
+ *	- end	- virtual end address
+ */
+ENTRY(arm940_dma_flush_range)
+	mov	ip, #0
+	mov	r1, #(CACHE_DSEGMENTS - 1) << 4	@ 4 segments
+1:	orr	r3, r1, #(CACHE_DENTRIES - 1) << 26 @ 64 entries
+2:
+#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
+	mcr	p15, 0, r3, c7, c14, 2		@ clean/flush D entry
+#else
+	mcr	p15, 0, r3, c7, c10, 2		@ clean D entry
+#endif
+	subs	r3, r3, #1 << 26
+	bcs	2b				@ entries 63 to 0
+	subs	r1, r1, #1 << 4
+	bcs	1b				@ segments 7 to 0
+	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
+	mov	pc, lr
+
+ENTRY(arm940_cache_fns)
+	.long	arm940_flush_kern_cache_all
+	.long	arm940_flush_user_cache_all
+	.long	arm940_flush_user_cache_range
+	.long	arm940_coherent_kern_range
+	.long	arm940_coherent_user_range
+	.long	arm940_flush_kern_dcache_page
+	.long	arm940_dma_inv_range
+	.long	arm940_dma_clean_range
+	.long	arm940_dma_flush_range
+
+	__INIT
+
+	.type	__arm940_setup, #function
+__arm940_setup:
+	mov	r0, #0
+	mcr	p15, 0, r0, c7, c5, 0		@ invalidate I cache
+	mcr	p15, 0, r0, c7, c6, 0		@ invalidate D cache
+	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
+
+	mcr	p15, 0, r0, c6, c3, 0		@ disable data area 3~7
+	mcr	p15, 0, r0, c6, c4, 0
+	mcr	p15, 0, r0, c6, c5, 0
+	mcr	p15, 0, r0, c6, c6, 0
+	mcr	p15, 0, r0, c6, c7, 0
+
+	mcr	p15, 0, r0, c6, c3, 1		@ disable instruction area 3~7
+	mcr	p15, 0, r0, c6, c4, 1
+	mcr	p15, 0, r0, c6, c5, 1
+	mcr	p15, 0, r0, c6, c6, 1
+	mcr	p15, 0, r0, c6, c7, 1
+
+	mov	r0, #0x0000003F			@ base = 0, size = 4GB
+	mcr	p15, 0, r0, c6,	c0, 0		@ set area 0, default
+	mcr	p15, 0, r0, c6,	c0, 1
+
+	ldr	r0, =(CONFIG_DRAM_BASE & 0xFFFFF000) @ base[31:12] of RAM
+	ldr	r1, =(CONFIG_DRAM_SIZE >> 12)	@ size of RAM (must be >= 4KB)
+	mov	r2, #10				@ 11 is the minimum (4KB)
+1:	add	r2, r2, #1			@ area size *= 2
+	mov	r1, r1, lsr #1
+	bne	1b				@ count not zero r-shift
+	orr	r0, r0, r2, lsl #1		@ the area register value
+	orr	r0, r0, #1			@ set enable bit
+	mcr	p15, 0, r0, c6,	c1, 0		@ set area 1, RAM
+	mcr	p15, 0, r0, c6,	c1, 1
+
+	ldr	r0, =(CONFIG_FLASH_MEM_BASE & 0xFFFFF000) @ base[31:12] of FLASH
+	ldr	r1, =(CONFIG_FLASH_SIZE >> 12)	@ size of FLASH (must be >= 4KB)
+	mov	r2, #10				@ 11 is the minimum (4KB)
+1:	add	r2, r2, #1			@ area size *= 2
+	mov	r1, r1, lsr #1
+	bne	1b				@ count not zero r-shift
+	orr	r0, r0, r2, lsl #1		@ the area register value
+	orr	r0, r0, #1			@ set enable bit
+	mcr	p15, 0, r0, c6,	c2, 0		@ set area 2, ROM/FLASH
+	mcr	p15, 0, r0, c6,	c2, 1
+
+	mov	r0, #0x06
+	mcr	p15, 0, r0, c2, c0, 0		@ Region 1&2 cacheable
+	mcr	p15, 0, r0, c2, c0, 1
+#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
+	mov	r0, #0x00			@ disable whole write buffer
+#else
+	mov	r0, #0x02			@ Region 1 write bufferred
+#endif
+	mcr	p15, 0, r0, c3, c0, 0
+
+	mov	r0, #0x10000
+	sub	r0, r0, #1			@ r0 = 0xffff
+	mcr	p15, 0, r0, c5, c0, 0		@ all read/write access
+	mcr	p15, 0, r0, c5, c0, 1
+
+	mrc	p15, 0, r0, c1, c0		@ get control register
+	orr	r0, r0, #0x00001000		@ I-cache
+	orr	r0, r0, #0x00000005		@ MPU/D-cache
+
+	mov	pc, lr
+
+	.size	__arm940_setup, . - __arm940_setup
+
+	__INITDATA
+
+/*
+ * Purpose : Function pointers used to access above functions - all calls
+ *	     come through these
+ */
+	.type	arm940_processor_functions, #object
+ENTRY(arm940_processor_functions)
+	.word	nommu_early_abort
+	.word	cpu_arm940_proc_init
+	.word	cpu_arm940_proc_fin
+	.word	cpu_arm940_reset
+	.word   cpu_arm940_do_idle
+	.word	cpu_arm940_dcache_clean_area
+	.word	cpu_arm940_switch_mm
+	.word	0		@ cpu_*_set_pte
+	.size	arm940_processor_functions, . - arm940_processor_functions
+
+	.section ".rodata"
+
+.type	cpu_arch_name, #object
+cpu_arch_name:
+	.asciz	"armv4t"
+	.size	cpu_arch_name, . - cpu_arch_name
+
+	.type	cpu_elf_name, #object
+cpu_elf_name:
+	.asciz	"v4"
+	.size	cpu_elf_name, . - cpu_elf_name
+
+	.type	cpu_arm940_name, #object
+cpu_arm940_name:
+	.ascii	"ARM940T"
+	.size	cpu_arm940_name, . - cpu_arm940_name
+
+	.align
+
+	.section ".proc.info.init", #alloc, #execinstr
+
+	.type	__arm940_proc_info,#object
+__arm940_proc_info:
+	.long	0x41009400
+	.long	0xff00fff0
+	.long	0
+	b	__arm940_setup
+	.long	cpu_arch_name
+	.long	cpu_elf_name
+	.long	HWCAP_SWP | HWCAP_HALF | HWCAP_THUMB
+	.long	cpu_arm940_name
+	.long	arm940_processor_functions
+	.long	0
+	.long	0
+	.long	arm940_cache_fns
+	.size	__arm940_proc_info, . - __arm940_proc_info
+
diff --git a/arch/arm/mm/proc-arm946.S b/arch/arm/mm/proc-arm946.S
new file mode 100644
index 000000000000..e18617564421
--- /dev/null
+++ b/arch/arm/mm/proc-arm946.S
@@ -0,0 +1,424 @@
+/*
+ *  linux/arch/arm/mm/arm946.S: utility functions for ARM946E-S
+ *
+ *  Copyright (C) 2004-2006 Hyok S. Choi (hyok.choi@samsung.com)
+ *
+ *  (Many of cache codes are from proc-arm926.S)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <asm/assembler.h>
+#include <asm/pgtable-hwdef.h>
+#include <asm/pgtable.h>
+#include <asm/procinfo.h>
+#include <asm/ptrace.h>
+
+/*
+ * ARM946E-S is synthesizable to have 0KB to 1MB sized D-Cache,
+ * comprising 256 lines of 32 bytes (8 words).
+ */
+#define CACHE_DSIZE	(CONFIG_CPU_DCACHE_SIZE) /* typically 8KB. */
+#define CACHE_DLINESIZE	32			/* fixed */
+#define CACHE_DSEGMENTS	4			/* fixed */
+#define CACHE_DENTRIES	(CACHE_DSIZE / CACHE_DSEGMENTS / CACHE_DLINESIZE)
+#define CACHE_DLIMIT	(CACHE_DSIZE * 4)	/* benchmark needed */
+
+	.text
+/*
+ * cpu_arm946_proc_init()
+ * cpu_arm946_switch_mm()
+ *
+ * These are not required.
+ */
+ENTRY(cpu_arm946_proc_init)
+ENTRY(cpu_arm946_switch_mm)
+	mov	pc, lr
+
+/*
+ * cpu_arm946_proc_fin()
+ */
+ENTRY(cpu_arm946_proc_fin)
+	stmfd	sp!, {lr}
+	mov	ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
+	msr	cpsr_c, ip
+	bl	arm946_flush_kern_cache_all
+	mrc	p15, 0, r0, c1, c0, 0		@ ctrl register
+	bic	r0, r0, #0x00001000		@ i-cache
+	bic	r0, r0, #0x00000004		@ d-cache
+	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
+	ldmfd	sp!, {pc}
+
+/*
+ * cpu_arm946_reset(loc)
+ * Params  : r0 = address to jump to
+ * Notes   : This sets up everything for a reset
+ */
+ENTRY(cpu_arm946_reset)
+	mov	ip, #0
+	mcr	p15, 0, ip, c7, c5, 0		@ flush I cache
+	mcr	p15, 0, ip, c7, c6, 0		@ flush D cache
+	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
+	mrc	p15, 0, ip, c1, c0, 0		@ ctrl register
+	bic	ip, ip, #0x00000005		@ .............c.p
+	bic	ip, ip, #0x00001000		@ i-cache
+	mcr	p15, 0, ip, c1, c0, 0		@ ctrl register
+	mov	pc, r0
+
+/*
+ * cpu_arm946_do_idle()
+ */
+	.align	5
+ENTRY(cpu_arm946_do_idle)
+	mcr	p15, 0, r0, c7, c0, 4		@ Wait for interrupt
+	mov	pc, lr
+
+/*
+ *	flush_user_cache_all()
+ */
+ENTRY(arm946_flush_user_cache_all)
+	/* FALLTHROUGH */
+
+/*
+ *	flush_kern_cache_all()
+ *
+ *	Clean and invalidate the entire cache.
+ */
+ENTRY(arm946_flush_kern_cache_all)
+	mov	r2, #VM_EXEC
+	mov	ip, #0
+__flush_whole_cache:
+#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
+	mcr	p15, 0, ip, c7, c6, 0		@ flush D cache
+#else
+	mov	r1, #(CACHE_DSEGMENTS - 1) << 29 @ 4 segments
+1:	orr	r3, r1, #(CACHE_DENTRIES - 1) << 4 @ n entries
+2:	mcr	p15, 0, r3, c7, c14, 2		@ clean/flush D index
+	subs	r3, r3, #1 << 4
+	bcs	2b				@ entries n to 0
+	subs	r1, r1, #1 << 29
+	bcs	1b				@ segments 3 to 0
+#endif
+	tst	r2, #VM_EXEC
+	mcrne	p15, 0, ip, c7, c5, 0		@ flush I cache
+	mcrne	p15, 0, ip, c7, c10, 4		@ drain WB
+	mov	pc, lr
+
+/*
+ *	flush_user_cache_range(start, end, flags)
+ *
+ *	Clean and invalidate a range of cache entries in the
+ *	specified address range.
+ *
+ *	- start	- start address (inclusive)
+ *	- end	- end address (exclusive)
+ *	- flags	- vm_flags describing address space
+ * (same as arm926)
+ */
+ENTRY(arm946_flush_user_cache_range)
+	mov	ip, #0
+	sub	r3, r1, r0			@ calculate total size
+	cmp	r3, #CACHE_DLIMIT
+	bhs	__flush_whole_cache
+
+1:	tst	r2, #VM_EXEC
+#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
+	mcr	p15, 0, r0, c7, c6, 1		@ invalidate D entry
+	mcrne	p15, 0, r0, c7, c5, 1		@ invalidate I entry
+	add	r0, r0, #CACHE_DLINESIZE
+	mcr	p15, 0, r0, c7, c6, 1		@ invalidate D entry
+	mcrne	p15, 0, r0, c7, c5, 1		@ invalidate I entry
+	add	r0, r0, #CACHE_DLINESIZE
+#else
+	mcr	p15, 0, r0, c7, c14, 1		@ clean and invalidate D entry
+	mcrne	p15, 0, r0, c7, c5, 1		@ invalidate I entry
+	add	r0, r0, #CACHE_DLINESIZE
+	mcr	p15, 0, r0, c7, c14, 1		@ clean and invalidate D entry
+	mcrne	p15, 0, r0, c7, c5, 1		@ invalidate I entry
+	add	r0, r0, #CACHE_DLINESIZE
+#endif
+	cmp	r0, r1
+	blo	1b
+	tst	r2, #VM_EXEC
+	mcrne	p15, 0, ip, c7, c10, 4		@ drain WB
+	mov	pc, lr
+
+/*
+ *	coherent_kern_range(start, end)
+ *
+ *	Ensure coherency between the Icache and the Dcache in the
+ *	region described by start, end.  If you have non-snooping
+ *	Harvard caches, you need to implement this function.
+ *
+ *	- start	- virtual start address
+ *	- end	- virtual end address
+ */
+ENTRY(arm946_coherent_kern_range)
+	/* FALLTHROUGH */
+
+/*
+ *	coherent_user_range(start, end)
+ *
+ *	Ensure coherency between the Icache and the Dcache in the
+ *	region described by start, end.  If you have non-snooping
+ *	Harvard caches, you need to implement this function.
+ *
+ *	- start	- virtual start address
+ *	- end	- virtual end address
+ * (same as arm926)
+ */
+ENTRY(arm946_coherent_user_range)
+	bic	r0, r0, #CACHE_DLINESIZE - 1
+1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
+	mcr	p15, 0, r0, c7, c5, 1		@ invalidate I entry
+	add	r0, r0, #CACHE_DLINESIZE
+	cmp	r0, r1
+	blo	1b
+	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
+	mov	pc, lr
+
+/*
+ *	flush_kern_dcache_page(void *page)
+ *
+ *	Ensure no D cache aliasing occurs, either with itself or
+ *	the I cache
+ *
+ *	- addr	- page aligned address
+ * (same as arm926)
+ */
+ENTRY(arm946_flush_kern_dcache_page)
+	add	r1, r0, #PAGE_SZ
+1:	mcr	p15, 0, r0, c7, c14, 1		@ clean+invalidate D entry
+	add	r0, r0, #CACHE_DLINESIZE
+	cmp	r0, r1
+	blo	1b
+	mov	r0, #0
+	mcr	p15, 0, r0, c7, c5, 0		@ invalidate I cache
+	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
+	mov	pc, lr
+
+/*
+ *	dma_inv_range(start, end)
+ *
+ *	Invalidate (discard) the specified virtual address range.
+ *	May not write back any entries.  If 'start' or 'end'
+ *	are not cache line aligned, those lines must be written
+ *	back.
+ *
+ *	- start	- virtual start address
+ *	- end	- virtual end address
+ * (same as arm926)
+ */
+ENTRY(arm946_dma_inv_range)
+#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
+	tst	r0, #CACHE_DLINESIZE - 1
+	mcrne	p15, 0, r0, c7, c10, 1		@ clean D entry
+	tst	r1, #CACHE_DLINESIZE - 1
+	mcrne	p15, 0, r1, c7, c10, 1		@ clean D entry
+#endif
+	bic	r0, r0, #CACHE_DLINESIZE - 1
+1:	mcr	p15, 0, r0, c7, c6, 1		@ invalidate D entry
+	add	r0, r0, #CACHE_DLINESIZE
+	cmp	r0, r1
+	blo	1b
+	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
+	mov	pc, lr
+
+/*
+ *	dma_clean_range(start, end)
+ *
+ *	Clean the specified virtual address range.
+ *
+ *	- start	- virtual start address
+ *	- end	- virtual end address
+ *
+ * (same as arm926)
+ */
+ENTRY(arm946_dma_clean_range)
+#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
+	bic	r0, r0, #CACHE_DLINESIZE - 1
+1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
+	add	r0, r0, #CACHE_DLINESIZE
+	cmp	r0, r1
+	blo	1b
+#endif
+	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
+	mov	pc, lr
+
+/*
+ *	dma_flush_range(start, end)
+ *
+ *	Clean and invalidate the specified virtual address range.
+ *
+ *	- start	- virtual start address
+ *	- end	- virtual end address
+ *
+ * (same as arm926)
+ */
+ENTRY(arm946_dma_flush_range)
+	bic	r0, r0, #CACHE_DLINESIZE - 1
+1:
+#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
+	mcr	p15, 0, r0, c7, c14, 1		@ clean+invalidate D entry
+#else
+	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
+#endif
+	add	r0, r0, #CACHE_DLINESIZE
+	cmp	r0, r1
+	blo	1b
+	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
+	mov	pc, lr
+
+ENTRY(arm946_cache_fns)
+	.long	arm946_flush_kern_cache_all
+	.long	arm946_flush_user_cache_all
+	.long	arm946_flush_user_cache_range
+	.long	arm946_coherent_kern_range
+	.long	arm946_coherent_user_range
+	.long	arm946_flush_kern_dcache_page
+	.long	arm946_dma_inv_range
+	.long	arm946_dma_clean_range
+	.long	arm946_dma_flush_range
+
+
+ENTRY(cpu_arm946_dcache_clean_area)
+#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
+1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
+	add	r0, r0, #CACHE_DLINESIZE
+	subs	r1, r1, #CACHE_DLINESIZE
+	bhi	1b
+#endif
+	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
+	mov	pc, lr
+
+	__INIT
+
+	.type	__arm946_setup, #function
+__arm946_setup:
+	mov	r0, #0
+	mcr	p15, 0, r0, c7, c5, 0		@ invalidate I cache
+	mcr	p15, 0, r0, c7, c6, 0		@ invalidate D cache
+	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
+
+	mcr	p15, 0, r0, c6, c3, 0		@ disable memory region 3~7
+	mcr	p15, 0, r0, c6, c4, 0
+	mcr	p15, 0, r0, c6, c5, 0
+	mcr	p15, 0, r0, c6, c6, 0
+	mcr	p15, 0, r0, c6, c7, 0
+
+	mov	r0, #0x0000003F			@ base = 0, size = 4GB
+	mcr	p15, 0, r0, c6,	c0, 0		@ set region 0, default
+
+	ldr	r0, =(CONFIG_DRAM_BASE & 0xFFFFF000) @ base[31:12] of RAM
+	ldr	r1, =(CONFIG_DRAM_SIZE >> 12)	@ size of RAM (must be >= 4KB)
+	mov	r2, #10				@ 11 is the minimum (4KB)
+1:	add	r2, r2, #1			@ area size *= 2
+	mov	r1, r1, lsr #1
+	bne	1b				@ count not zero r-shift
+	orr	r0, r0, r2, lsl #1		@ the region register value
+	orr	r0, r0, #1			@ set enable bit
+	mcr	p15, 0, r0, c6,	c1, 0		@ set region 1, RAM
+
+	ldr	r0, =(CONFIG_FLASH_MEM_BASE & 0xFFFFF000) @ base[31:12] of FLASH
+	ldr	r1, =(CONFIG_FLASH_SIZE >> 12)	@ size of FLASH (must be >= 4KB)
+	mov	r2, #10				@ 11 is the minimum (4KB)
+1:	add	r2, r2, #1			@ area size *= 2
+	mov	r1, r1, lsr #1
+	bne	1b				@ count not zero r-shift
+	orr	r0, r0, r2, lsl #1		@ the region register value
+	orr	r0, r0, #1			@ set enable bit
+	mcr	p15, 0, r0, c6,	c2, 0		@ set region 2, ROM/FLASH
+
+	mov	r0, #0x06
+	mcr	p15, 0, r0, c2, c0, 0		@ region 1,2 d-cacheable
+	mcr	p15, 0, r0, c2, c0, 1		@ region 1,2 i-cacheable
+#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
+	mov	r0, #0x00			@ disable whole write buffer
+#else
+	mov	r0, #0x02			@ region 1 write bufferred
+#endif
+	mcr	p15, 0, r0, c3, c0, 0
+
+/*
+ *  Access Permission Settings for future permission control by PU.
+ *
+ *				priv.	user
+ * 	region 0 (whole)	rw	--	: b0001
+ * 	region 1 (RAM)		rw	rw	: b0011
+ * 	region 2 (FLASH)	rw	r-	: b0010
+ *	region 3~7 (none)	--	--	: b0000
+ */
+	mov	r0, #0x00000031
+	orr	r0, r0, #0x00000200
+	mcr	p15, 0, r0, c5, c0, 2		@ set data access permission
+	mcr	p15, 0, r0, c5, c0, 3		@ set inst. access permission
+
+	mrc	p15, 0, r0, c1, c0		@ get control register
+	orr	r0, r0, #0x00001000		@ I-cache
+	orr	r0, r0, #0x00000005		@ MPU/D-cache
+#ifdef CONFIG_CPU_CACHE_ROUND_ROBIN
+	orr	r0, r0, #0x00004000		@ .1.. .... .... ....
+#endif
+	mov	pc, lr
+
+	.size	__arm946_setup, . - __arm946_setup
+
+	__INITDATA
+
+/*
+ * Purpose : Function pointers used to access above functions - all calls
+ *	     come through these
+ */
+	.type	arm946_processor_functions, #object
+ENTRY(arm946_processor_functions)
+	.word	nommu_early_abort
+	.word	cpu_arm946_proc_init
+	.word	cpu_arm946_proc_fin
+	.word	cpu_arm946_reset
+	.word   cpu_arm946_do_idle
+
+	.word	cpu_arm946_dcache_clean_area
+	.word	cpu_arm946_switch_mm
+	.word	0		@ cpu_*_set_pte
+	.size	arm946_processor_functions, . - arm946_processor_functions
+
+	.section ".rodata"
+
+	.type	cpu_arch_name, #object
+cpu_arch_name:
+	.asciz	"armv5te"
+	.size	cpu_arch_name, . - cpu_arch_name
+
+	.type	cpu_elf_name, #object
+cpu_elf_name:
+	.asciz	"v5t"
+	.size	cpu_elf_name, . - cpu_elf_name
+
+	.type	cpu_arm946_name, #object
+cpu_arm946_name:
+	.ascii	"ARM946E-S"
+	.size	cpu_arm946_name, . - cpu_arm946_name
+
+	.align
+
+	.section ".proc.info.init", #alloc, #execinstr
+	.type	__arm946_proc_info,#object
+__arm946_proc_info:
+	.long	0x41009460
+	.long	0xff00fff0
+	.long	0
+	b	__arm946_setup
+	.long	cpu_arch_name
+	.long	cpu_elf_name
+	.long	HWCAP_SWP | HWCAP_HALF | HWCAP_THUMB
+	.long	cpu_arm946_name
+	.long	arm946_processor_functions
+	.long	0
+	.long	0
+	.long	arm940_cache_fns
+	.size	__arm946_proc_info, . - __arm946_proc_info
+
diff --git a/arch/arm/mm/proc-arm9tdmi.S b/arch/arm/mm/proc-arm9tdmi.S
new file mode 100644
index 000000000000..918ebf65d4f6
--- /dev/null
+++ b/arch/arm/mm/proc-arm9tdmi.S
@@ -0,0 +1,134 @@
+/*
+ *  linux/arch/arm/mm/proc-arm9tdmi.S: utility functions for ARM9TDMI
+ *
+ *  Copyright (C) 2003-2006 Hyok S. Choi <hyok.choi@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <asm/assembler.h>
+#include <asm/asm-offsets.h>
+#include <asm/pgtable-hwdef.h>
+#include <asm/pgtable.h>
+#include <asm/procinfo.h>
+#include <asm/ptrace.h>
+
+	.text
+/*
+ * cpu_arm9tdmi_proc_init()
+ * cpu_arm9tdmi_do_idle()
+ * cpu_arm9tdmi_dcache_clean_area()
+ * cpu_arm9tdmi_switch_mm()
+ *
+ * These are not required.
+ */
+ENTRY(cpu_arm9tdmi_proc_init)
+ENTRY(cpu_arm9tdmi_do_idle)
+ENTRY(cpu_arm9tdmi_dcache_clean_area)
+ENTRY(cpu_arm9tdmi_switch_mm)
+		mov	pc, lr
+
+/*
+ * cpu_arm9tdmi_proc_fin()
+ */
+ENTRY(cpu_arm9tdmi_proc_fin)
+		mov	r0, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
+		msr	cpsr_c, r0
+		mov	pc, lr
+
+/*
+ * Function: cpu_arm9tdmi_reset(loc)
+ * Params  : loc(r0)	address to jump to
+ * Purpose : Sets up everything for a reset and jump to the location for soft reset.
+ */
+ENTRY(cpu_arm9tdmi_reset)
+		mov	pc, r0
+
+		__INIT
+
+		.type	__arm9tdmi_setup, #function
+__arm9tdmi_setup:
+		mov	pc, lr
+		.size	__arm9tdmi_setup, . - __arm9tdmi_setup
+
+		__INITDATA
+
+/*
+ * Purpose : Function pointers used to access above functions - all calls
+ *	     come through these
+ */
+		.type	arm9tdmi_processor_functions, #object
+ENTRY(arm9tdmi_processor_functions)
+		.word	nommu_early_abort
+		.word	cpu_arm9tdmi_proc_init
+		.word	cpu_arm9tdmi_proc_fin
+		.word	cpu_arm9tdmi_reset
+		.word	cpu_arm9tdmi_do_idle
+		.word	cpu_arm9tdmi_dcache_clean_area
+		.word	cpu_arm9tdmi_switch_mm
+		.word	0		@ cpu_*_set_pte
+		.size	arm9tdmi_processor_functions, . - arm9tdmi_processor_functions
+
+		.section ".rodata"
+
+		.type	cpu_arch_name, #object
+cpu_arch_name:
+		.asciz	"armv4t"
+		.size	cpu_arch_name, . - cpu_arch_name
+
+		.type	cpu_elf_name, #object
+cpu_elf_name:
+		.asciz	"v4"
+		.size	cpu_elf_name, . - cpu_elf_name
+
+		.type	cpu_arm9tdmi_name, #object
+cpu_arm9tdmi_name:
+		.asciz	"ARM9TDMI"
+		.size	cpu_arm9tdmi_name, . - cpu_arm9tdmi_name
+
+		.type	cpu_p2001_name, #object
+cpu_p2001_name:
+		.asciz	"P2001"
+		.size	cpu_p2001_name, . - cpu_p2001_name
+
+		.align
+
+		.section ".proc.info.init", #alloc, #execinstr
+
+		.type	__arm9tdmi_proc_info, #object
+__arm9tdmi_proc_info:
+		.long	0x41009900
+		.long	0xfff8ff00
+		.long	0
+		.long	0
+		b	__arm9tdmi_setup
+		.long	cpu_arch_name
+		.long	cpu_elf_name
+		.long	HWCAP_SWP | HWCAP_THUMB | HWCAP_26BIT
+		.long	cpu_arm9tdmi_name
+		.long	arm9tdmi_processor_functions
+		.long	0
+		.long	0
+		.long	v4_cache_fns
+		.size	__arm9tdmi_proc_info, . - __arm9dmi_proc_info
+
+		.type	__p2001_proc_info, #object
+__p2001_proc_info:
+		.long	0x41029000
+		.long	0xffffffff
+		.long	0
+		.long	0
+		b	__arm9tdmi_setup
+		.long	cpu_arch_name
+		.long	cpu_elf_name
+		.long	HWCAP_SWP | HWCAP_THUMB | HWCAP_26BIT
+		.long	cpu_p2001_name
+		.long	arm9tdmi_processor_functions
+		.long	0
+		.long	0
+		.long	v4_cache_fns
+		.size	__p2001_proc_info, . - __p2001_proc_info
diff --git a/arch/arm/mm/proc-xscale.S b/arch/arm/mm/proc-xscale.S
index 3ca0c92e98a2..e8b377d637f6 100644
--- a/arch/arm/mm/proc-xscale.S
+++ b/arch/arm/mm/proc-xscale.S
@@ -311,12 +311,6 @@ ENTRY(xscale_flush_kern_dcache_page)
  *	- end	 - virtual end address
  */
 ENTRY(xscale_dma_inv_range)
-	mrc	p15, 0, r2, c0, c0, 0		@ read ID
-	eor	r2, r2, #0x69000000
-	eor	r2, r2, #0x00052000
-	bics	r2, r2, #1
-	beq	xscale_dma_flush_range
-
 	tst	r0, #CACHELINESIZE - 1
 	bic	r0, r0, #CACHELINESIZE - 1
 	mcrne	p15, 0, r0, c7, c10, 1		@ clean D entry
@@ -375,6 +369,30 @@ ENTRY(xscale_cache_fns)
 	.long	xscale_dma_clean_range
 	.long	xscale_dma_flush_range
 
+/*
+ * On stepping A0/A1 of the 80200, invalidating D-cache by line doesn't
+ * clear the dirty bits, which means that if we invalidate a dirty line,
+ * the dirty data can still be written back to external memory later on.
+ *
+ * The recommended workaround is to always do a clean D-cache line before
+ * doing an invalidate D-cache line, so on the affected processors,
+ * dma_inv_range() is implemented as dma_flush_range().
+ *
+ * See erratum #25 of "Intel 80200 Processor Specification Update",
+ * revision January 22, 2003, available at:
+ *     http://www.intel.com/design/iio/specupdt/273415.htm
+ */
+ENTRY(xscale_80200_A0_A1_cache_fns)
+	.long	xscale_flush_kern_cache_all
+	.long	xscale_flush_user_cache_all
+	.long	xscale_flush_user_cache_range
+	.long	xscale_coherent_kern_range
+	.long	xscale_coherent_user_range
+	.long	xscale_flush_kern_dcache_page
+	.long	xscale_dma_flush_range
+	.long	xscale_dma_clean_range
+	.long	xscale_dma_flush_range
+
 ENTRY(cpu_xscale_dcache_clean_area)
 1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
 	add	r0, r0, #CACHELINESIZE
@@ -531,6 +549,11 @@ cpu_elf_name:
 	.asciz	"v5"
 	.size	cpu_elf_name, . - cpu_elf_name
 
+	.type	cpu_80200_A0_A1_name, #object
+cpu_80200_A0_A1_name:
+	.asciz	"XScale-80200 A0/A1"
+	.size	cpu_80200_A0_A1_name, . - cpu_80200_A0_A1_name
+
 	.type	cpu_80200_name, #object
 cpu_80200_name:
 	.asciz	"XScale-80200"
@@ -595,6 +618,29 @@ cpu_pxa270_name:
 
 	.section ".proc.info.init", #alloc, #execinstr
 
+	.type	__80200_A0_A1_proc_info,#object
+__80200_A0_A1_proc_info:
+	.long	0x69052000
+	.long	0xfffffffe
+	.long   PMD_TYPE_SECT | \
+		PMD_SECT_BUFFERABLE | \
+		PMD_SECT_CACHEABLE | \
+		PMD_SECT_AP_WRITE | \
+		PMD_SECT_AP_READ
+	.long   PMD_TYPE_SECT | \
+		PMD_SECT_AP_WRITE | \
+		PMD_SECT_AP_READ
+	b	__xscale_setup
+	.long	cpu_arch_name
+	.long	cpu_elf_name
+	.long	HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
+	.long	cpu_80200_name
+	.long	xscale_processor_functions
+	.long	v4wbi_tlb_fns
+	.long	xscale_mc_user_fns
+	.long	xscale_80200_A0_A1_cache_fns
+	.size	__80200_A0_A1_proc_info, . - __80200_A0_A1_proc_info
+
 	.type	__80200_proc_info,#object
 __80200_proc_info:
 	.long	0x69052000
diff --git a/arch/arm/oprofile/op_model_xscale.c b/arch/arm/oprofile/op_model_xscale.c
index 34fdc733743b..6576143f2559 100644
--- a/arch/arm/oprofile/op_model_xscale.c
+++ b/arch/arm/oprofile/op_model_xscale.c
@@ -36,11 +36,11 @@
 #ifdef CONFIG_ARCH_IOP310
 #define XSCALE_PMU_IRQ  IRQ_XS80200_PMU
 #endif
-#ifdef CONFIG_ARCH_IOP321
-#define XSCALE_PMU_IRQ  IRQ_IOP321_CORE_PMU
+#ifdef CONFIG_ARCH_IOP32X
+#define XSCALE_PMU_IRQ  IRQ_IOP32X_CORE_PMU
 #endif
-#ifdef CONFIG_ARCH_IOP331
-#define XSCALE_PMU_IRQ  IRQ_IOP331_CORE_PMU
+#ifdef CONFIG_ARCH_IOP33X
+#define XSCALE_PMU_IRQ  IRQ_IOP33X_CORE_PMU
 #endif
 #ifdef CONFIG_ARCH_PXA
 #define XSCALE_PMU_IRQ  IRQ_PMU
@@ -88,7 +88,7 @@ static struct pmu_counter results[MAX_COUNTERS];
 /*
  * There are two versions of the PMU in current XScale processors
  * with differing register layouts and number of performance counters.
- * e.g. IOP321 is xsc1 whilst IOP331 is xsc2.
+ * e.g. IOP32x is xsc1 whilst IOP33x is xsc2.
  * We detect which register layout to use in xscale_detect_pmu()
  */
 enum { PMU_XSC1, PMU_XSC2 };
diff --git a/arch/arm/plat-iop/Makefile b/arch/arm/plat-iop/Makefile
new file mode 100644
index 000000000000..23da00b11517
--- /dev/null
+++ b/arch/arm/plat-iop/Makefile
@@ -0,0 +1,8 @@
+#
+# Makefile for the linux kernel.
+#
+
+obj-y			:= gpio.o i2c.o pci.o setup.o time.o
+obj-m			:=
+obj-n			:=
+obj-			:=
diff --git a/arch/arm/plat-iop/gpio.c b/arch/arm/plat-iop/gpio.c
new file mode 100644
index 000000000000..eda436083417
--- /dev/null
+++ b/arch/arm/plat-iop/gpio.c
@@ -0,0 +1,48 @@
+/*
+ * arch/arm/plat-iop/gpio.c
+ * GPIO handling for Intel IOP3xx processors.
+ *
+ * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+#include <linux/device.h>
+#include <asm/hardware/iop3xx.h>
+
+void gpio_line_config(int line, int direction)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	if (direction == GPIO_IN) {
+		*IOP3XX_GPOE |= 1 << line;
+	} else if (direction == GPIO_OUT) {
+		*IOP3XX_GPOE &= ~(1 << line);
+	}
+	local_irq_restore(flags);
+}
+EXPORT_SYMBOL(gpio_line_config);
+
+int gpio_line_get(int line)
+{
+	return !!(*IOP3XX_GPID & (1 << line));
+}
+EXPORT_SYMBOL(gpio_line_get);
+
+void gpio_line_set(int line, int value)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	if (value == GPIO_LOW) {
+		*IOP3XX_GPOD &= ~(1 << line);
+	} else if (value == GPIO_HIGH) {
+		*IOP3XX_GPOD |= 1 << line;
+	}
+	local_irq_restore(flags);
+}
+EXPORT_SYMBOL(gpio_line_set);
diff --git a/arch/arm/plat-iop/i2c.c b/arch/arm/plat-iop/i2c.c
new file mode 100644
index 000000000000..e99909bdba71
--- /dev/null
+++ b/arch/arm/plat-iop/i2c.c
@@ -0,0 +1,81 @@
+/*
+ * arch/arm/plat-iop/i2c.c
+ *
+ * Author: Nicolas Pitre <nico@cam.org>
+ * Copyright (C) 2001 MontaVista Software, Inc.
+ * Copyright (C) 2004 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/major.h>
+#include <linux/fs.h>
+#include <linux/platform_device.h>
+#include <linux/serial.h>
+#include <linux/tty.h>
+#include <linux/serial_core.h>
+#include <asm/io.h>
+#include <asm/pgtable.h>
+#include <asm/page.h>
+#include <asm/mach/map.h>
+#include <asm/setup.h>
+#include <asm/system.h>
+#include <asm/memory.h>
+#include <asm/hardware.h>
+#include <asm/hardware/iop3xx.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#ifdef CONFIG_ARCH_IOP32X
+#define IRQ_IOP3XX_I2C_0	IRQ_IOP32X_I2C_0
+#define IRQ_IOP3XX_I2C_1	IRQ_IOP32X_I2C_1
+#endif
+#ifdef CONFIG_ARCH_IOP33X
+#define IRQ_IOP3XX_I2C_0	IRQ_IOP33X_I2C_0
+#define IRQ_IOP3XX_I2C_1	IRQ_IOP33X_I2C_1
+#endif
+
+static struct resource iop3xx_i2c0_resources[] = {
+	[0] = {
+		.start	= 0xfffff680,
+		.end	= 0xfffff697,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_IOP3XX_I2C_0,
+		.end	= IRQ_IOP3XX_I2C_0,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device iop3xx_i2c0_device = {
+	.name		= "IOP3xx-I2C",
+	.id		= 0,
+	.num_resources	= 2,
+	.resource	= iop3xx_i2c0_resources,
+};
+
+
+static struct resource iop3xx_i2c1_resources[] = {
+	[0] = {
+		.start	= 0xfffff6a0,
+		.end	= 0xfffff6b7,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_IOP3XX_I2C_1,
+		.end	= IRQ_IOP3XX_I2C_1,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+struct platform_device iop3xx_i2c1_device = {
+	.name		= "IOP3xx-I2C",
+	.id		= 1,
+	.num_resources	= 2,
+	.resource	= iop3xx_i2c1_resources,
+};
diff --git a/arch/arm/plat-iop/pci.c b/arch/arm/plat-iop/pci.c
new file mode 100644
index 000000000000..e647812654f2
--- /dev/null
+++ b/arch/arm/plat-iop/pci.c
@@ -0,0 +1,247 @@
+/*
+ * arch/arm/plat-iop/pci.c
+ *
+ * PCI support for the Intel IOP32X and IOP33X processors
+ *
+ * Author: Rory Bolt <rorybolt@pacbell.net>
+ * Copyright (C) 2002 Rory Bolt
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/slab.h>
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/system.h>
+#include <asm/hardware.h>
+#include <asm/mach/pci.h>
+#include <asm/hardware/iop3xx.h>
+
+// #define DEBUG
+
+#ifdef DEBUG
+#define  DBG(x...) printk(x)
+#else
+#define  DBG(x...) do { } while (0)
+#endif
+
+/*
+ * This routine builds either a type0 or type1 configuration command.  If the
+ * bus is on the 803xx then a type0 made, else a type1 is created.
+ */
+static u32 iop3xx_cfg_address(struct pci_bus *bus, int devfn, int where)
+{
+	struct pci_sys_data *sys = bus->sysdata;
+	u32 addr;
+
+	if (sys->busnr == bus->number)
+		addr = 1 << (PCI_SLOT(devfn) + 16) | (PCI_SLOT(devfn) << 11);
+	else
+		addr = bus->number << 16 | PCI_SLOT(devfn) << 11 | 1;
+
+	addr |=	PCI_FUNC(devfn) << 8 | (where & ~3);
+
+	return addr;
+}
+
+/*
+ * This routine checks the status of the last configuration cycle.  If an error
+ * was detected it returns a 1, else it returns a 0.  The errors being checked
+ * are parity, master abort, target abort (master and target).  These types of
+ * errors occure during a config cycle where there is no device, like during
+ * the discovery stage.
+ */
+static int iop3xx_pci_status(void)
+{
+	unsigned int status;
+	int ret = 0;
+
+	/*
+	 * Check the status registers.
+	 */
+	status = *IOP3XX_ATUSR;
+	if (status & 0xf900) {
+		DBG("\t\t\tPCI: P0 - status = 0x%08x\n", status);
+		*IOP3XX_ATUSR = status & 0xf900;
+		ret = 1;
+	}
+
+	status = *IOP3XX_ATUISR;
+	if (status & 0x679f) {
+		DBG("\t\t\tPCI: P1 - status = 0x%08x\n", status);
+		*IOP3XX_ATUISR = status & 0x679f;
+		ret = 1;
+	}
+
+	return ret;
+}
+
+/*
+ * Simply write the address register and read the configuration
+ * data.  Note that the 4 nop's ensure that we are able to handle
+ * a delayed abort (in theory.)
+ */
+static inline u32 iop3xx_read(unsigned long addr)
+{
+	u32 val;
+
+	__asm__ __volatile__(
+		"str	%1, [%2]\n\t"
+		"ldr	%0, [%3]\n\t"
+		"nop\n\t"
+		"nop\n\t"
+		"nop\n\t"
+		"nop\n\t"
+		: "=r" (val)
+		: "r" (addr), "r" (IOP3XX_OCCAR), "r" (IOP3XX_OCCDR));
+
+	return val;
+}
+
+/*
+ * The read routines must check the error status of the last configuration
+ * cycle.  If there was an error, the routine returns all hex f's.
+ */
+static int
+iop3xx_read_config(struct pci_bus *bus, unsigned int devfn, int where,
+		int size, u32 *value)
+{
+	unsigned long addr = iop3xx_cfg_address(bus, devfn, where);
+	u32 val = iop3xx_read(addr) >> ((where & 3) * 8);
+
+	if (iop3xx_pci_status())
+		val = 0xffffffff;
+
+	*value = val;
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int
+iop3xx_write_config(struct pci_bus *bus, unsigned int devfn, int where,
+		int size, u32 value)
+{
+	unsigned long addr = iop3xx_cfg_address(bus, devfn, where);
+	u32 val;
+
+	if (size != 4) {
+		val = iop3xx_read(addr);
+		if (iop3xx_pci_status())
+			return PCIBIOS_SUCCESSFUL;
+
+		where = (where & 3) * 8;
+
+		if (size == 1)
+			val &= ~(0xff << where);
+		else
+			val &= ~(0xffff << where);
+
+		*IOP3XX_OCCDR = val | value << where;
+	} else {
+		asm volatile(
+			"str	%1, [%2]\n\t"
+			"str	%0, [%3]\n\t"
+			"nop\n\t"
+			"nop\n\t"
+			"nop\n\t"
+			"nop\n\t"
+			:
+			: "r" (value), "r" (addr),
+			  "r" (IOP3XX_OCCAR), "r" (IOP3XX_OCCDR));
+	}
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static struct pci_ops iop3xx_ops = {
+	.read	= iop3xx_read_config,
+	.write	= iop3xx_write_config,
+};
+
+/*
+ * When a PCI device does not exist during config cycles, the 80200 gets a
+ * bus error instead of returning 0xffffffff. This handler simply returns.
+ */
+static int
+iop3xx_pci_abort(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
+{
+	DBG("PCI abort: address = 0x%08lx fsr = 0x%03x PC = 0x%08lx LR = 0x%08lx\n",
+		addr, fsr, regs->ARM_pc, regs->ARM_lr);
+
+	/*
+	 * If it was an imprecise abort, then we need to correct the
+	 * return address to be _after_ the instruction.
+	 */
+	if (fsr & (1 << 10))
+		regs->ARM_pc += 4;
+
+	return 0;
+}
+
+int iop3xx_pci_setup(int nr, struct pci_sys_data *sys)
+{
+	struct resource *res;
+
+	if (nr != 0)
+		return 0;
+
+	res = kzalloc(2 * sizeof(struct resource), GFP_KERNEL);
+	if (!res)
+		panic("PCI: unable to alloc resources");
+
+	res[0].start = IOP3XX_PCI_LOWER_IO_VA;
+	res[0].end   = IOP3XX_PCI_LOWER_IO_VA + IOP3XX_PCI_IO_WINDOW_SIZE - 1;
+	res[0].name  = "IOP3XX PCI I/O Space";
+	res[0].flags = IORESOURCE_IO;
+	request_resource(&ioport_resource, &res[0]);
+
+	res[1].start = IOP3XX_PCI_LOWER_MEM_PA;
+	res[1].end   = IOP3XX_PCI_LOWER_MEM_PA + IOP3XX_PCI_MEM_WINDOW_SIZE - 1;
+	res[1].name  = "IOP3XX PCI Memory Space";
+	res[1].flags = IORESOURCE_MEM;
+	request_resource(&iomem_resource, &res[1]);
+
+	sys->mem_offset = IOP3XX_PCI_LOWER_MEM_PA - IOP3XX_PCI_LOWER_MEM_BA;
+	sys->io_offset  = IOP3XX_PCI_LOWER_IO_VA - IOP3XX_PCI_LOWER_IO_BA;
+
+	sys->resource[0] = &res[0];
+	sys->resource[1] = &res[1];
+	sys->resource[2] = NULL;
+
+	return 1;
+}
+
+struct pci_bus *iop3xx_pci_scan_bus(int nr, struct pci_sys_data *sys)
+{
+	return pci_scan_bus(sys->busnr, &iop3xx_ops, sys);
+}
+
+void iop3xx_pci_preinit(void)
+{
+	DBG("PCI:  Intel 803xx PCI init code.\n");
+	DBG("ATU: IOP3XX_ATUCMD=0x%04x\n", *IOP3XX_ATUCMD);
+	DBG("ATU: IOP3XX_OMWTVR0=0x%04x, IOP3XX_OIOWTVR=0x%04x\n",
+			*IOP3XX_OMWTVR0,
+			*IOP3XX_OIOWTVR);
+	DBG("ATU: IOP3XX_ATUCR=0x%08x\n", *IOP3XX_ATUCR);
+	DBG("ATU: IOP3XX_IABAR0=0x%08x IOP3XX_IALR0=0x%08x IOP3XX_IATVR0=%08x\n",
+			*IOP3XX_IABAR0, *IOP3XX_IALR0, *IOP3XX_IATVR0);
+	DBG("ATU: IOP3XX_OMWTVR0=0x%08x\n", *IOP3XX_OMWTVR0);
+	DBG("ATU: IOP3XX_IABAR1=0x%08x IOP3XX_IALR1=0x%08x\n",
+			*IOP3XX_IABAR1, *IOP3XX_IALR1);
+	DBG("ATU: IOP3XX_ERBAR=0x%08x IOP3XX_ERLR=0x%08x IOP3XX_ERTVR=%08x\n",
+			*IOP3XX_ERBAR, *IOP3XX_ERLR, *IOP3XX_ERTVR);
+	DBG("ATU: IOP3XX_IABAR2=0x%08x IOP3XX_IALR2=0x%08x IOP3XX_IATVR2=%08x\n",
+			*IOP3XX_IABAR2, *IOP3XX_IALR2, *IOP3XX_IATVR2);
+	DBG("ATU: IOP3XX_IABAR3=0x%08x IOP3XX_IALR3=0x%08x IOP3XX_IATVR3=%08x\n",
+			*IOP3XX_IABAR3, *IOP3XX_IALR3, *IOP3XX_IATVR3);
+
+	hook_fault_code(16+6, iop3xx_pci_abort, SIGBUS, "imprecise external abort");
+}
diff --git a/arch/arm/plat-iop/setup.c b/arch/arm/plat-iop/setup.c
new file mode 100644
index 000000000000..4689db638e95
--- /dev/null
+++ b/arch/arm/plat-iop/setup.c
@@ -0,0 +1,38 @@
+/*
+ * arch/arm/plat-iop/setup.c
+ *
+ * Author: Nicolas Pitre <nico@cam.org>
+ * Copyright (C) 2001 MontaVista Software, Inc.
+ * Copyright (C) 2004 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <asm/mach/map.h>
+#include <asm/hardware/iop3xx.h>
+
+/*
+ * Standard IO mapping for all IOP3xx based systems
+ */
+static struct map_desc iop3xx_std_desc[] __initdata = {
+	 {	/* mem mapped registers */
+		.virtual	= IOP3XX_PERIPHERAL_VIRT_BASE,
+		.pfn		= __phys_to_pfn(IOP3XX_PERIPHERAL_PHYS_BASE),
+		.length		= IOP3XX_PERIPHERAL_SIZE,
+		.type		= MT_DEVICE,
+	 }, {	/* PCI IO space */
+		.virtual	= IOP3XX_PCI_LOWER_IO_VA,
+		.pfn		= __phys_to_pfn(IOP3XX_PCI_LOWER_IO_PA),
+		.length		= IOP3XX_PCI_IO_WINDOW_SIZE,
+		.type		= MT_DEVICE,
+	 },
+};
+
+void __init iop3xx_map_io(void)
+{
+	iotable_init(iop3xx_std_desc, ARRAY_SIZE(iop3xx_std_desc));
+}
diff --git a/arch/arm/plat-iop/time.c b/arch/arm/plat-iop/time.c
new file mode 100644
index 000000000000..06282dffbdc6
--- /dev/null
+++ b/arch/arm/plat-iop/time.c
@@ -0,0 +1,98 @@
+/*
+ * arch/arm/plat-iop/time.c
+ *
+ * Timer code for IOP32x and IOP33x based systems
+ *
+ * Author: Deepak Saxena <dsaxena@mvista.com>
+ *
+ * Copyright 2002-2003 MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/time.h>
+#include <linux/init.h>
+#include <linux/timex.h>
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/time.h>
+
+#ifdef CONFIG_ARCH_IOP32X
+#define IRQ_IOP3XX_TIMER0	IRQ_IOP32X_TIMER0
+#else
+#ifdef CONFIG_ARCH_IOP33X
+#define IRQ_IOP3XX_TIMER0	IRQ_IOP33X_TIMER0
+#endif
+#endif
+
+static unsigned long ticks_per_jiffy;
+static unsigned long ticks_per_usec;
+static unsigned long next_jiffy_time;
+
+unsigned long iop3xx_gettimeoffset(void)
+{
+	unsigned long offset;
+
+	offset = next_jiffy_time - *IOP3XX_TU_TCR1;
+
+	return offset / ticks_per_usec;
+}
+
+static irqreturn_t
+iop3xx_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+	write_seqlock(&xtime_lock);
+
+	iop3xx_cp6_enable();
+	asm volatile("mcr p6, 0, %0, c6, c1, 0" : : "r" (1));
+	iop3xx_cp6_disable();
+
+	while ((signed long)(next_jiffy_time - *IOP3XX_TU_TCR1)
+							>= ticks_per_jiffy) {
+		timer_tick(regs);
+		next_jiffy_time -= ticks_per_jiffy;
+	}
+
+	write_sequnlock(&xtime_lock);
+
+	return IRQ_HANDLED;
+}
+
+static struct irqaction iop3xx_timer_irq = {
+	.name		= "IOP3XX Timer Tick",
+	.handler	= iop3xx_timer_interrupt,
+	.flags		= IRQF_DISABLED | IRQF_TIMER,
+};
+
+void __init iop3xx_init_time(unsigned long tick_rate)
+{
+	u32 timer_ctl;
+
+	ticks_per_jiffy = (tick_rate + HZ/2) / HZ;
+	ticks_per_usec = tick_rate / 1000000;
+	next_jiffy_time = 0xffffffff;
+
+	timer_ctl = IOP3XX_TMR_EN | IOP3XX_TMR_PRIVILEGED |
+			IOP3XX_TMR_RELOAD | IOP3XX_TMR_RATIO_1_1;
+
+	/*
+	 * We use timer 0 for our timer interrupt, and timer 1 as
+	 * monotonic counter for tracking missed jiffies.
+	 */
+	iop3xx_cp6_enable();
+	asm volatile("mcr p6, 0, %0, c4, c1, 0" : : "r" (ticks_per_jiffy - 1));
+	asm volatile("mcr p6, 0, %0, c0, c1, 0" : : "r" (timer_ctl));
+	asm volatile("mcr p6, 0, %0, c5, c1, 0" : : "r" (0xffffffff));
+	asm volatile("mcr p6, 0, %0, c1, c1, 0" : : "r" (timer_ctl));
+	iop3xx_cp6_disable();
+
+	setup_irq(IRQ_IOP3XX_TIMER0, &iop3xx_timer_irq);
+}
diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c
index 7f45c7c3e673..f1179ad4be1b 100644
--- a/arch/arm/plat-omap/clock.c
+++ b/arch/arm/plat-omap/clock.c
@@ -100,6 +100,7 @@ void clk_disable(struct clk *clk)
 		return;
 
 	spin_lock_irqsave(&clockfw_lock, flags);
+	BUG_ON(clk->usecount == 0);
 	if (arch_clock->clk_disable)
 		arch_clock->clk_disable(clk);
 	spin_unlock_irqrestore(&clockfw_lock, flags);
@@ -322,6 +323,31 @@ EXPORT_SYMBOL(clk_allow_idle);
 
 /*-------------------------------------------------------------------------*/
 
+#ifdef CONFIG_OMAP_RESET_CLOCKS
+/*
+ * Disable any unused clocks left on by the bootloader
+ */
+static int __init clk_disable_unused(void)
+{
+	struct clk *ck;
+	unsigned long flags;
+
+	list_for_each_entry(ck, &clocks, node) {
+		if (ck->usecount > 0 || (ck->flags & ALWAYS_ENABLED) ||
+			ck->enable_reg == 0)
+			continue;
+
+		spin_lock_irqsave(&clockfw_lock, flags);
+		if (arch_clock->clk_disable_unused)
+			arch_clock->clk_disable_unused(ck);
+		spin_unlock_irqrestore(&clockfw_lock, flags);
+	}
+
+	return 0;
+}
+late_initcall(clk_disable_unused);
+#endif
+
 int __init clk_init(struct clk_functions * custom_clocks)
 {
 	if (!custom_clocks) {
diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c
index 1812f237d12f..dbc3f44e07a6 100644
--- a/arch/arm/plat-omap/devices.c
+++ b/arch/arm/plat-omap/devices.c
@@ -148,7 +148,7 @@ static inline void omap_init_kp(void) {}
 
 #ifdef CONFIG_ARCH_OMAP24XX
 #define	OMAP_MMC1_BASE		0x4809c000
-#define OMAP_MMC1_INT		83
+#define OMAP_MMC1_INT		INT_24XX_MMC_IRQ
 #else
 #define	OMAP_MMC1_BASE		0xfffb7800
 #define OMAP_MMC1_INT		INT_MMC
@@ -225,7 +225,14 @@ static void __init omap_init_mmc(void)
 	/* block 1 is always available and has just one pinout option */
 	mmc = &mmc_conf->mmc[0];
 	if (mmc->enabled) {
-		if (!cpu_is_omap24xx()) {
+		if (cpu_is_omap24xx()) {
+			omap_cfg_reg(H18_24XX_MMC_CMD);
+			omap_cfg_reg(H15_24XX_MMC_CLKI);
+			omap_cfg_reg(G19_24XX_MMC_CLKO);
+			omap_cfg_reg(F20_24XX_MMC_DAT0);
+			omap_cfg_reg(F19_24XX_MMC_DAT_DIR0);
+			omap_cfg_reg(G18_24XX_MMC_CMD_DIR);
+		} else {
 			omap_cfg_reg(MMC_CMD);
 			omap_cfg_reg(MMC_CLK);
 			omap_cfg_reg(MMC_DAT0);
@@ -236,7 +243,14 @@ static void __init omap_init_mmc(void)
 			}
 		}
 		if (mmc->wire4) {
-			if (!cpu_is_omap24xx()) {
+			if (cpu_is_omap24xx()) {
+				omap_cfg_reg(H14_24XX_MMC_DAT1);
+				omap_cfg_reg(E19_24XX_MMC_DAT2);
+				omap_cfg_reg(D19_24XX_MMC_DAT3);
+				omap_cfg_reg(E20_24XX_MMC_DAT_DIR1);
+				omap_cfg_reg(F18_24XX_MMC_DAT_DIR2);
+				omap_cfg_reg(E18_24XX_MMC_DAT_DIR3);
+			} else {
 				omap_cfg_reg(MMC_DAT1);
 				/* NOTE:  DAT2 can be on W10 (here) or M15 */
 				if (!mmc->nomux)
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index 9eddc9507147..1bbb431843ce 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -119,32 +119,41 @@ static void clear_lch_regs(int lch)
 		omap_writew(0, lch_base + i);
 }
 
-void omap_set_dma_priority(int dst_port, int priority)
+void omap_set_dma_priority(int lch, int dst_port, int priority)
 {
 	unsigned long reg;
 	u32 l;
 
-	switch (dst_port) {
-	case OMAP_DMA_PORT_OCP_T1:	/* FFFECC00 */
-		reg = OMAP_TC_OCPT1_PRIOR;
-		break;
-	case OMAP_DMA_PORT_OCP_T2:	/* FFFECCD0 */
-		reg = OMAP_TC_OCPT2_PRIOR;
-		break;
-	case OMAP_DMA_PORT_EMIFF:	/* FFFECC08 */
-		reg = OMAP_TC_EMIFF_PRIOR;
-		break;
-	case OMAP_DMA_PORT_EMIFS:	/* FFFECC04 */
-		reg = OMAP_TC_EMIFS_PRIOR;
-		break;
-	default:
-		BUG();
-		return;
+	if (cpu_class_is_omap1()) {
+		switch (dst_port) {
+		case OMAP_DMA_PORT_OCP_T1:	/* FFFECC00 */
+			reg = OMAP_TC_OCPT1_PRIOR;
+			break;
+		case OMAP_DMA_PORT_OCP_T2:	/* FFFECCD0 */
+			reg = OMAP_TC_OCPT2_PRIOR;
+			break;
+		case OMAP_DMA_PORT_EMIFF:	/* FFFECC08 */
+			reg = OMAP_TC_EMIFF_PRIOR;
+			break;
+		case OMAP_DMA_PORT_EMIFS:	/* FFFECC04 */
+			reg = OMAP_TC_EMIFS_PRIOR;
+			break;
+		default:
+			BUG();
+			return;
+		}
+		l = omap_readl(reg);
+		l &= ~(0xf << 8);
+		l |= (priority & 0xf) << 8;
+		omap_writel(l, reg);
+	}
+
+	if (cpu_is_omap24xx()) {
+		if (priority)
+			OMAP_DMA_CCR_REG(lch) |= (1 << 6);
+		else
+			OMAP_DMA_CCR_REG(lch) &= ~(1 << 6);
 	}
-	l = omap_readl(reg);
-	l &= ~(0xf << 8);
-	l |= (priority & 0xf) << 8;
-	omap_writel(l, reg);
 }
 
 void omap_set_dma_transfer_params(int lch, int data_type, int elem_count,
@@ -234,6 +243,14 @@ void omap_set_dma_color_mode(int lch, enum omap_dma_color_mode mode, u32 color)
 	OMAP1_DMA_LCH_CTRL_REG(lch) = w;
 }
 
+void omap_set_dma_write_mode(int lch, enum omap_dma_write_mode mode)
+{
+	if (cpu_is_omap24xx()) {
+		OMAP_DMA_CSDP_REG(lch) &= ~(0x3 << 16);
+		OMAP_DMA_CSDP_REG(lch) |= (mode << 16);
+	}
+}
+
 /* Note that src_port is only for omap1 */
 void omap_set_dma_src_params(int lch, int src_port, int src_amode,
 			     unsigned long src_start,
@@ -698,6 +715,32 @@ void omap_stop_dma(int lch)
 }
 
 /*
+ * Allows changing the DMA callback function or data. This may be needed if
+ * the driver shares a single DMA channel for multiple dma triggers.
+ */
+int omap_set_dma_callback(int lch,
+			  void (* callback)(int lch, u16 ch_status, void *data),
+			  void *data)
+{
+	unsigned long flags;
+
+	if (lch < 0)
+		return -ENODEV;
+
+	spin_lock_irqsave(&dma_chan_lock, flags);
+	if (dma_chan[lch].dev_id == -1) {
+		printk(KERN_ERR "DMA callback for not set for free channel\n");
+		spin_unlock_irqrestore(&dma_chan_lock, flags);
+		return -EINVAL;
+	}
+	dma_chan[lch].callback = callback;
+	dma_chan[lch].data = data;
+	spin_unlock_irqrestore(&dma_chan_lock, flags);
+
+	return 0;
+}
+
+/*
  * Returns current physical source address for the given DMA channel.
  * If the channel is running the caller must disable interrupts prior calling
  * this function and process the returned value before re-enabling interrupt to
@@ -1339,6 +1382,14 @@ static int __init omap_init_dma(void)
 			dma_chan_count = 16;
 		} else
 			dma_chan_count = 9;
+		if (cpu_is_omap16xx()) {
+			u16 w;
+
+			/* this would prevent OMAP sleep */
+			w = omap_readw(OMAP1610_DMA_LCD_CTRL);
+			w &= ~(1 << 8);
+			omap_writew(w, OMAP1610_DMA_LCD_CTRL);
+		}
 	} else if (cpu_is_omap24xx()) {
 		u8 revision = omap_readb(OMAP_DMA4_REVISION);
 		printk(KERN_INFO "OMAP DMA hardware revision %d.%d\n",
@@ -1414,11 +1465,13 @@ EXPORT_SYMBOL(omap_request_dma);
 EXPORT_SYMBOL(omap_free_dma);
 EXPORT_SYMBOL(omap_start_dma);
 EXPORT_SYMBOL(omap_stop_dma);
+EXPORT_SYMBOL(omap_set_dma_callback);
 EXPORT_SYMBOL(omap_enable_dma_irq);
 EXPORT_SYMBOL(omap_disable_dma_irq);
 
 EXPORT_SYMBOL(omap_set_dma_transfer_params);
 EXPORT_SYMBOL(omap_set_dma_color_mode);
+EXPORT_SYMBOL(omap_set_dma_write_mode);
 
 EXPORT_SYMBOL(omap_set_dma_src_params);
 EXPORT_SYMBOL(omap_set_dma_src_index);
diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c
index 50524436de63..bcbb8d7392be 100644
--- a/arch/arm/plat-omap/dmtimer.c
+++ b/arch/arm/plat-omap/dmtimer.c
@@ -75,10 +75,14 @@ struct omap_dm_timer {
 #endif
 	void __iomem *io_base;
 	unsigned reserved:1;
+	unsigned enabled:1;
 };
 
 #ifdef CONFIG_ARCH_OMAP1
 
+#define omap_dm_clk_enable(x)
+#define omap_dm_clk_disable(x)
+
 static struct omap_dm_timer dm_timers[] = {
 	{ .phys_base = 0xfffb1400, .irq = INT_1610_GPTIMER1 },
 	{ .phys_base = 0xfffb1c00, .irq = INT_1610_GPTIMER2 },
@@ -92,6 +96,9 @@ static struct omap_dm_timer dm_timers[] = {
 
 #elif defined(CONFIG_ARCH_OMAP2)
 
+#define omap_dm_clk_enable(x) clk_enable(x)
+#define omap_dm_clk_disable(x) clk_disable(x)
+
 static struct omap_dm_timer dm_timers[] = {
 	{ .phys_base = 0x48028000, .irq = INT_24XX_GPTIMER1 },
 	{ .phys_base = 0x4802a000, .irq = INT_24XX_GPTIMER2 },
@@ -154,24 +161,28 @@ static void omap_dm_timer_reset(struct omap_dm_timer *timer)
 {
 	u32 l;
 
-	if (timer != &dm_timers[0]) {
+	if (!cpu_class_is_omap2() || timer != &dm_timers[0]) {
 		omap_dm_timer_write_reg(timer, OMAP_TIMER_IF_CTRL_REG, 0x06);
 		omap_dm_timer_wait_for_reset(timer);
 	}
-	omap_dm_timer_set_source(timer, OMAP_TIMER_SRC_SYS_CLK);
+	omap_dm_timer_set_source(timer, OMAP_TIMER_SRC_32_KHZ);
 
 	/* Set to smart-idle mode */
 	l = omap_dm_timer_read_reg(timer, OMAP_TIMER_OCP_CFG_REG);
 	l |= 0x02 << 3;
+
+	if (cpu_class_is_omap2() && timer == &dm_timers[0]) {
+		/* Enable wake-up only for GPT1 on OMAP2 CPUs*/
+		l |= 1 << 2;
+		/* Non-posted mode */
+		omap_dm_timer_write_reg(timer, OMAP_TIMER_IF_CTRL_REG, 0);
+	}
 	omap_dm_timer_write_reg(timer, OMAP_TIMER_OCP_CFG_REG, l);
 }
 
 static void omap_dm_timer_prepare(struct omap_dm_timer *timer)
 {
-#ifdef CONFIG_ARCH_OMAP2
-	clk_enable(timer->iclk);
-	clk_enable(timer->fclk);
-#endif
+	omap_dm_timer_enable(timer);
 	omap_dm_timer_reset(timer);
 }
 
@@ -223,15 +234,36 @@ struct omap_dm_timer *omap_dm_timer_request_specific(int id)
 
 void omap_dm_timer_free(struct omap_dm_timer *timer)
 {
+	omap_dm_timer_enable(timer);
 	omap_dm_timer_reset(timer);
-#ifdef CONFIG_ARCH_OMAP2
-	clk_disable(timer->iclk);
-	clk_disable(timer->fclk);
-#endif
+	omap_dm_timer_disable(timer);
+
 	WARN_ON(!timer->reserved);
 	timer->reserved = 0;
 }
 
+void omap_dm_timer_enable(struct omap_dm_timer *timer)
+{
+	if (timer->enabled)
+		return;
+
+	omap_dm_clk_enable(timer->fclk);
+	omap_dm_clk_enable(timer->iclk);
+
+	timer->enabled = 1;
+}
+
+void omap_dm_timer_disable(struct omap_dm_timer *timer)
+{
+	if (!timer->enabled)
+		return;
+
+	omap_dm_clk_disable(timer->iclk);
+	omap_dm_clk_disable(timer->fclk);
+
+	timer->enabled = 0;
+}
+
 int omap_dm_timer_get_irq(struct omap_dm_timer *timer)
 {
 	return timer->irq;
@@ -276,7 +308,7 @@ __u32 omap_dm_timer_modify_idlect_mask(__u32 inputmask)
 
 struct clk *omap_dm_timer_get_fclk(struct omap_dm_timer *timer)
 {
-        return timer->fclk;
+	return timer->fclk;
 }
 
 __u32 omap_dm_timer_modify_idlect_mask(__u32 inputmask)
@@ -406,11 +438,16 @@ void omap_dm_timer_set_int_enable(struct omap_dm_timer *timer,
 				  unsigned int value)
 {
 	omap_dm_timer_write_reg(timer, OMAP_TIMER_INT_EN_REG, value);
+	omap_dm_timer_write_reg(timer, OMAP_TIMER_WAKEUP_EN_REG, value);
 }
 
 unsigned int omap_dm_timer_read_status(struct omap_dm_timer *timer)
 {
-	return omap_dm_timer_read_reg(timer, OMAP_TIMER_STAT_REG);
+	unsigned int l;
+
+	l = omap_dm_timer_read_reg(timer, OMAP_TIMER_STAT_REG);
+
+	return l;
 }
 
 void omap_dm_timer_write_status(struct omap_dm_timer *timer, unsigned int value)
@@ -420,12 +457,16 @@ void omap_dm_timer_write_status(struct omap_dm_timer *timer, unsigned int value)
 
 unsigned int omap_dm_timer_read_counter(struct omap_dm_timer *timer)
 {
-	return omap_dm_timer_read_reg(timer, OMAP_TIMER_COUNTER_REG);
+	unsigned int l;
+
+	l = omap_dm_timer_read_reg(timer, OMAP_TIMER_COUNTER_REG);
+
+	return l;
 }
 
 void omap_dm_timer_write_counter(struct omap_dm_timer *timer, unsigned int value)
 {
-	return omap_dm_timer_write_reg(timer, OMAP_TIMER_COUNTER_REG, value);
+	omap_dm_timer_write_reg(timer, OMAP_TIMER_COUNTER_REG, value);
 }
 
 int omap_dm_timers_active(void)
@@ -436,9 +477,14 @@ int omap_dm_timers_active(void)
 		struct omap_dm_timer *timer;
 
 		timer = &dm_timers[i];
+
+		if (!timer->enabled)
+			continue;
+
 		if (omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG) &
-		    OMAP_TIMER_CTRL_ST)
+		    OMAP_TIMER_CTRL_ST) {
 			return 1;
+		}
 	}
 	return 0;
 }
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index cd7f973fb286..f55f99ae58ae 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -94,6 +94,8 @@
 #define OMAP24XX_GPIO_SYSCONFIG		0x0010
 #define OMAP24XX_GPIO_SYSSTATUS		0x0014
 #define OMAP24XX_GPIO_IRQSTATUS1	0x0018
+#define OMAP24XX_GPIO_IRQSTATUS2	0x0028
+#define OMAP24XX_GPIO_IRQENABLE2	0x002c
 #define OMAP24XX_GPIO_IRQENABLE1	0x001c
 #define OMAP24XX_GPIO_CTRL		0x0030
 #define OMAP24XX_GPIO_OE		0x0034
@@ -110,8 +112,6 @@
 #define OMAP24XX_GPIO_CLEARDATAOUT	0x0090
 #define OMAP24XX_GPIO_SETDATAOUT	0x0094
 
-#define OMAP_MPUIO_MASK		(~OMAP_MAX_GPIO_LINES & 0xff)
-
 struct gpio_bank {
 	void __iomem *base;
 	u16 irq;
@@ -216,11 +216,13 @@ static inline int gpio_valid(int gpio)
 {
 	if (gpio < 0)
 		return -1;
+#ifndef CONFIG_ARCH_OMAP24XX
 	if (OMAP_GPIO_IS_MPUIO(gpio)) {
-		if ((gpio & OMAP_MPUIO_MASK) > 16)
+		if (gpio >= OMAP_MAX_GPIO_LINES + 16)
 			return -1;
 		return 0;
 	}
+#endif
 #ifdef CONFIG_ARCH_OMAP15XX
 	if (cpu_is_omap15xx() && gpio < 16)
 		return 0;
@@ -529,6 +531,10 @@ static void _clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask)
 		return;
 	}
 	__raw_writel(gpio_mask, reg);
+
+	/* Workaround for clearing DSP GPIO interrupts to allow retention */
+	if (cpu_is_omap2420())
+		__raw_writel(gpio_mask, bank->base + OMAP24XX_GPIO_IRQSTATUS2);
 }
 
 static inline void _clear_gpio_irqstatus(struct gpio_bank *bank, int gpio)
@@ -662,6 +668,14 @@ static int _set_gpio_wakeup(struct gpio_bank *bank, int gpio, int enable)
 	}
 }
 
+static void _reset_gpio(struct gpio_bank *bank, int gpio)
+{
+	_set_gpio_direction(bank, get_gpio_index(gpio), 1);
+	_set_gpio_irqenable(bank, gpio, 0);
+	_clear_gpio_irqstatus(bank, gpio);
+	_set_gpio_triggering(bank, get_gpio_index(gpio), IRQT_NOEDGE);
+}
+
 /* Use disable_irq_wake() and enable_irq_wake() functions from drivers */
 static int gpio_wake_enable(unsigned int irq, unsigned int enable)
 {
@@ -672,9 +686,7 @@ static int gpio_wake_enable(unsigned int irq, unsigned int enable)
 	if (check_gpio(gpio) < 0)
 		return -ENODEV;
 	bank = get_gpio_bank(gpio);
-	spin_lock(&bank->lock);
 	retval = _set_gpio_wakeup(bank, get_gpio_index(gpio), enable);
-	spin_unlock(&bank->lock);
 
 	return retval;
 }
@@ -696,7 +708,9 @@ int omap_request_gpio(int gpio)
 	}
 	bank->reserved_map |= (1 << get_gpio_index(gpio));
 
-	/* Set trigger to none. You need to enable the trigger after request_irq */
+	/* Set trigger to none. You need to enable the desired trigger with
+	 * request_irq() or set_irq_type().
+	 */
 	_set_gpio_triggering(bank, get_gpio_index(gpio), IRQT_NOEDGE);
 
 #ifdef CONFIG_ARCH_OMAP15XX
@@ -756,9 +770,7 @@ void omap_free_gpio(int gpio)
 	}
 #endif
 	bank->reserved_map &= ~(1 << get_gpio_index(gpio));
-	_set_gpio_direction(bank, get_gpio_index(gpio), 1);
-	_set_gpio_irqenable(bank, gpio, 0);
-	_clear_gpio_irqstatus(bank, gpio);
+	_reset_gpio(bank, gpio);
 	spin_unlock(&bank->lock);
 }
 
@@ -898,6 +910,14 @@ static void gpio_irq_handler(unsigned int irq, struct irqdesc *desc,
 
 }
 
+static void gpio_irq_shutdown(unsigned int irq)
+{
+	unsigned int gpio = irq - IH_GPIO_BASE;
+	struct gpio_bank *bank = get_gpio_bank(gpio);
+
+	_reset_gpio(bank, gpio);
+}
+
 static void gpio_ack_irq(unsigned int irq)
 {
 	unsigned int gpio = irq - IH_GPIO_BASE;
@@ -946,6 +966,7 @@ static void mpuio_unmask_irq(unsigned int irq)
 
 static struct irq_chip gpio_irq_chip = {
 	.name		= "GPIO",
+	.shutdown	= gpio_irq_shutdown,
 	.ack		= gpio_ack_irq,
 	.mask		= gpio_mask_irq,
 	.unmask		= gpio_unmask_irq,
@@ -985,7 +1006,7 @@ static int __init _omap_gpio_init(void)
 		else
 			clk_enable(gpio_ick);
 		gpio_fck = clk_get(NULL, "gpios_fck");
-		if (IS_ERR(gpio_ick))
+		if (IS_ERR(gpio_fck))
 			printk("Could not get gpios_fck\n");
 		else
 			clk_enable(gpio_fck);
@@ -1144,8 +1165,8 @@ static int omap_gpio_resume(struct sys_device *dev)
 			wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA;
 			break;
 		case METHOD_GPIO_24XX:
-			wake_clear = bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA;
-			wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA;
+			wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA;
+			wake_set = bank->base + OMAP24XX_GPIO_SETWKUENA;
 			break;
 		default:
 			continue;
diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
index 196aac3ac329..ade9a0fa6ef6 100644
--- a/arch/arm/plat-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -75,8 +75,6 @@ static struct clk *mcbsp1_ick = 0;
 static struct clk *mcbsp1_fck = 0;
 static struct clk *mcbsp2_ick = 0;
 static struct clk *mcbsp2_fck = 0;
-static struct clk *sys_ck = 0;
-static struct clk *sys_clkout = 0;
 #endif
 
 static void omap_mcbsp_dump_reg(u8 id)
@@ -232,7 +230,6 @@ static void omap2_mcbsp2_mux_setup(void)
 	omap_cfg_reg(W15_24XX_MCBSP2_DR);
 	omap_cfg_reg(V15_24XX_MCBSP2_DX);
 	omap_cfg_reg(V14_24XX_GPIO117);
-	omap_cfg_reg(W14_24XX_SYS_CLKOUT);
 }
 #endif
 
@@ -984,13 +981,7 @@ static int __init omap_mcbsp_init(void)
 	if (cpu_is_omap24xx()) {
 		mcbsp_info = mcbsp_24xx;
 		mcbsp_count = ARRAY_SIZE(mcbsp_24xx);
-
-		/* REVISIT: where's the right place? */
 		omap2_mcbsp2_mux_setup();
-		sys_ck = clk_get(0, "sys_ck");
-		sys_clkout = clk_get(0, "sys_clkout");
-		clk_set_parent(sys_clkout, sys_ck);
-		clk_enable(sys_clkout);
 	}
 #endif
 	for (i = 0; i < OMAP_MAX_MCBSP_COUNT ; i++) {
diff --git a/arch/arm/plat-omap/pm.c b/arch/arm/plat-omap/pm.c
deleted file mode 100644
index 04b4102727a8..000000000000
--- a/arch/arm/plat-omap/pm.c
+++ /dev/null
@@ -1,670 +0,0 @@
-/*
- * linux/arch/arm/plat-omap/pm.c
- *
- * OMAP Power Management Routines
- *
- * Original code for the SA11x0:
- * Copyright (c) 2001 Cliff Brake <cbrake@accelent.com>
- *
- * Modified for the PXA250 by Nicolas Pitre:
- * Copyright (c) 2002 Monta Vista Software, Inc.
- *
- * Modified for the OMAP1510 by David Singleton:
- * Copyright (c) 2002 Monta Vista Software, Inc.
- *
- * Cleanup 2004 for OMAP1510/1610 by Dirk Behme <dirk.behme@de.bosch.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/pm.h>
-#include <linux/sched.h>
-#include <linux/proc_fs.h>
-#include <linux/pm.h>
-#include <linux/interrupt.h>
-
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/mach/time.h>
-#include <asm/mach/irq.h>
-
-#include <asm/mach-types.h>
-#include <asm/arch/irqs.h>
-#include <asm/arch/tc.h>
-#include <asm/arch/pm.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/tps65010.h>
-#include <asm/arch/dsp_common.h>
-
-#include <asm/arch/clock.h>
-#include <asm/arch/sram.h>
-
-static unsigned int arm_sleep_save[ARM_SLEEP_SAVE_SIZE];
-static unsigned short ulpd_sleep_save[ULPD_SLEEP_SAVE_SIZE];
-static unsigned int mpui730_sleep_save[MPUI730_SLEEP_SAVE_SIZE];
-static unsigned int mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_SIZE];
-static unsigned int mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_SIZE];
-
-static void (*omap_sram_idle)(void) = NULL;
-static void (*omap_sram_suspend)(unsigned long r0, unsigned long r1) = NULL;
-
-/*
- * Let's power down on idle, but only if we are really
- * idle, because once we start down the path of
- * going idle we continue to do idle even if we get
- * a clock tick interrupt . .
- */
-void omap_pm_idle(void)
-{
-	unsigned int mask32 = 0;
-
-	/*
-	 * If the DSP is being used let's just idle the CPU, the overhead
-	 * to wake up from Big Sleep is big, milliseconds versus micro
-	 * seconds for wait for interrupt.
-	 */
-
-	local_irq_disable();
-	local_fiq_disable();
-	if (need_resched()) {
-		local_fiq_enable();
-		local_irq_enable();
-		return;
-	}
-	mask32 = omap_readl(ARM_SYSST);
-
-	/*
-	 * Prevent the ULPD from entering low power state by setting
-	 * POWER_CTRL_REG:4 = 0
-	 */
-	omap_writew(omap_readw(ULPD_POWER_CTRL) &
-		    ~ULPD_DEEP_SLEEP_TRANSITION_EN, ULPD_POWER_CTRL);
-
-	/*
-	 * Since an interrupt may set up a timer, we don't want to
-	 * reprogram the hardware timer with interrupts enabled.
-	 * Re-enable interrupts only after returning from idle.
-	 */
-	timer_dyn_reprogram();
-
-	if ((mask32 & DSP_IDLE) == 0) {
-		__asm__ volatile ("mcr	p15, 0, r0, c7, c0, 4");
-	} else
-		omap_sram_idle();
-
-	local_fiq_enable();
-	local_irq_enable();
-}
-
-/*
- * Configuration of the wakeup event is board specific. For the
- * moment we put it into this helper function. Later it may move
- * to board specific files.
- */
-static void omap_pm_wakeup_setup(void)
-{
-	u32 level1_wake = 0;
-	u32 level2_wake = OMAP_IRQ_BIT(INT_UART2);
-
-	/*
-	 * Turn off all interrupts except GPIO bank 1, L1-2nd level cascade,
-	 * and the L2 wakeup interrupts: keypad and UART2. Note that the
-	 * drivers must still separately call omap_set_gpio_wakeup() to
-	 * wake up to a GPIO interrupt.
-	 */
-	if (cpu_is_omap730())
-		level1_wake = OMAP_IRQ_BIT(INT_730_GPIO_BANK1) |
-			OMAP_IRQ_BIT(INT_730_IH2_IRQ);
-	else if (cpu_is_omap1510())
-		level1_wake = OMAP_IRQ_BIT(INT_GPIO_BANK1) |
-			OMAP_IRQ_BIT(INT_1510_IH2_IRQ);
-	else if (cpu_is_omap16xx())
-		level1_wake = OMAP_IRQ_BIT(INT_GPIO_BANK1) |
-			OMAP_IRQ_BIT(INT_1610_IH2_IRQ);
-
-	omap_writel(~level1_wake, OMAP_IH1_MIR);
-
-	if (cpu_is_omap730()) {
-		omap_writel(~level2_wake, OMAP_IH2_0_MIR);
-		omap_writel(~(OMAP_IRQ_BIT(INT_730_WAKE_UP_REQ) | OMAP_IRQ_BIT(INT_730_MPUIO_KEYPAD)), OMAP_IH2_1_MIR);
-	} else if (cpu_is_omap1510()) {
-		level2_wake |= OMAP_IRQ_BIT(INT_KEYBOARD);
-		omap_writel(~level2_wake,  OMAP_IH2_MIR);
-	} else if (cpu_is_omap16xx()) {
-		level2_wake |= OMAP_IRQ_BIT(INT_KEYBOARD);
-		omap_writel(~level2_wake, OMAP_IH2_0_MIR);
-
-		/* INT_1610_WAKE_UP_REQ is needed for GPIO wakeup... */
-		omap_writel(~OMAP_IRQ_BIT(INT_1610_WAKE_UP_REQ), OMAP_IH2_1_MIR);
-		omap_writel(~0x0, OMAP_IH2_2_MIR);
-		omap_writel(~0x0, OMAP_IH2_3_MIR);
-	}
-
-	/*  New IRQ agreement, recalculate in cascade order */
-	omap_writel(1, OMAP_IH2_CONTROL);
- 	omap_writel(1, OMAP_IH1_CONTROL);
-}
-
-void omap_pm_suspend(void)
-{
-	unsigned long arg0 = 0, arg1 = 0;
-
-	printk("PM: OMAP%x is trying to enter deep sleep...\n", system_rev);
-
-	omap_serial_wake_trigger(1);
-
-	if (machine_is_omap_osk()) {
-		/* Stop LED1 (D9) blink */
-		tps65010_set_led(LED1, OFF);
-	}
-
-	omap_writew(0xffff, ULPD_SOFT_DISABLE_REQ_REG);
-
-	/*
-	 * Step 1: turn off interrupts (FIXME: NOTE: already disabled)
-	 */
-
-	local_irq_disable();
-	local_fiq_disable();
-
-	/*
-	 * Step 2: save registers
-	 *
-	 * The omap is a strange/beautiful device. The caches, memory
-	 * and register state are preserved across power saves.
-	 * We have to save and restore very little register state to
-	 * idle the omap.
-         *
- 	 * Save interrupt, MPUI, ARM and UPLD control registers.
-	 */
-
-	if (cpu_is_omap730()) {
-		MPUI730_SAVE(OMAP_IH1_MIR);
-		MPUI730_SAVE(OMAP_IH2_0_MIR);
-		MPUI730_SAVE(OMAP_IH2_1_MIR);
-		MPUI730_SAVE(MPUI_CTRL);
-		MPUI730_SAVE(MPUI_DSP_BOOT_CONFIG);
-		MPUI730_SAVE(MPUI_DSP_API_CONFIG);
-		MPUI730_SAVE(EMIFS_CONFIG);
-		MPUI730_SAVE(EMIFF_SDRAM_CONFIG);
-
-	} else if (cpu_is_omap1510()) {
-		MPUI1510_SAVE(OMAP_IH1_MIR);
-		MPUI1510_SAVE(OMAP_IH2_MIR);
-		MPUI1510_SAVE(MPUI_CTRL);
-		MPUI1510_SAVE(MPUI_DSP_BOOT_CONFIG);
-		MPUI1510_SAVE(MPUI_DSP_API_CONFIG);
-		MPUI1510_SAVE(EMIFS_CONFIG);
-		MPUI1510_SAVE(EMIFF_SDRAM_CONFIG);
-	} else if (cpu_is_omap16xx()) {
-		MPUI1610_SAVE(OMAP_IH1_MIR);
-		MPUI1610_SAVE(OMAP_IH2_0_MIR);
-		MPUI1610_SAVE(OMAP_IH2_1_MIR);
-		MPUI1610_SAVE(OMAP_IH2_2_MIR);
-		MPUI1610_SAVE(OMAP_IH2_3_MIR);
-		MPUI1610_SAVE(MPUI_CTRL);
-		MPUI1610_SAVE(MPUI_DSP_BOOT_CONFIG);
-		MPUI1610_SAVE(MPUI_DSP_API_CONFIG);
-		MPUI1610_SAVE(EMIFS_CONFIG);
-		MPUI1610_SAVE(EMIFF_SDRAM_CONFIG);
-	}
-
-	ARM_SAVE(ARM_CKCTL);
-	ARM_SAVE(ARM_IDLECT1);
-	ARM_SAVE(ARM_IDLECT2);
-	if (!(cpu_is_omap1510()))
-		ARM_SAVE(ARM_IDLECT3);
-	ARM_SAVE(ARM_EWUPCT);
-	ARM_SAVE(ARM_RSTCT1);
-	ARM_SAVE(ARM_RSTCT2);
-	ARM_SAVE(ARM_SYSST);
-	ULPD_SAVE(ULPD_CLOCK_CTRL);
-	ULPD_SAVE(ULPD_STATUS_REQ);
-
-	/* (Step 3 removed - we now allow deep sleep by default) */
-
-	/*
-	 * Step 4: OMAP DSP Shutdown
-	 */
-
-
-	/*
-	 * Step 5: Wakeup Event Setup
-	 */
-
-	omap_pm_wakeup_setup();
-
-	/*
-	 * Step 6: ARM and Traffic controller shutdown
-	 */
-
-	/* disable ARM watchdog */
-	omap_writel(0x00F5, OMAP_WDT_TIMER_MODE);
-	omap_writel(0x00A0, OMAP_WDT_TIMER_MODE);
-
-	/*
-	 * Step 6b: ARM and Traffic controller shutdown
-	 *
-	 * Step 6 continues here. Prepare jump to power management
-	 * assembly code in internal SRAM.
-	 *
-	 * Since the omap_cpu_suspend routine has been copied to
-	 * SRAM, we'll do an indirect procedure call to it and pass the
-	 * contents of arm_idlect1 and arm_idlect2 so it can restore
-	 * them when it wakes up and it will return.
-	 */
-
-	arg0 = arm_sleep_save[ARM_SLEEP_SAVE_ARM_IDLECT1];
-	arg1 = arm_sleep_save[ARM_SLEEP_SAVE_ARM_IDLECT2];
-
-	/*
-	 * Step 6c: ARM and Traffic controller shutdown
-	 *
-	 * Jump to assembly code. The processor will stay there
- 	 * until wake up.
-	 */
-        omap_sram_suspend(arg0, arg1);
-
-	/*
-	 * If we are here, processor is woken up!
-	 */
-
-	/*
-	 * Restore ARM state, except ARM_IDLECT1/2 which omap_cpu_suspend did
-	 */
-
-	if (!(cpu_is_omap1510()))
-		ARM_RESTORE(ARM_IDLECT3);
-	ARM_RESTORE(ARM_CKCTL);
-	ARM_RESTORE(ARM_EWUPCT);
-	ARM_RESTORE(ARM_RSTCT1);
-	ARM_RESTORE(ARM_RSTCT2);
-	ARM_RESTORE(ARM_SYSST);
-	ULPD_RESTORE(ULPD_CLOCK_CTRL);
-	ULPD_RESTORE(ULPD_STATUS_REQ);
-
-	if (cpu_is_omap730()) {
-		MPUI730_RESTORE(EMIFS_CONFIG);
-		MPUI730_RESTORE(EMIFF_SDRAM_CONFIG);
-		MPUI730_RESTORE(OMAP_IH1_MIR);
-		MPUI730_RESTORE(OMAP_IH2_0_MIR);
-		MPUI730_RESTORE(OMAP_IH2_1_MIR);
-	} else if (cpu_is_omap1510()) {
-		MPUI1510_RESTORE(MPUI_CTRL);
-		MPUI1510_RESTORE(MPUI_DSP_BOOT_CONFIG);
-		MPUI1510_RESTORE(MPUI_DSP_API_CONFIG);
-		MPUI1510_RESTORE(EMIFS_CONFIG);
-		MPUI1510_RESTORE(EMIFF_SDRAM_CONFIG);
-		MPUI1510_RESTORE(OMAP_IH1_MIR);
-		MPUI1510_RESTORE(OMAP_IH2_MIR);
-	} else if (cpu_is_omap16xx()) {
-		MPUI1610_RESTORE(MPUI_CTRL);
-		MPUI1610_RESTORE(MPUI_DSP_BOOT_CONFIG);
-		MPUI1610_RESTORE(MPUI_DSP_API_CONFIG);
-		MPUI1610_RESTORE(EMIFS_CONFIG);
-		MPUI1610_RESTORE(EMIFF_SDRAM_CONFIG);
-
-		MPUI1610_RESTORE(OMAP_IH1_MIR);
-		MPUI1610_RESTORE(OMAP_IH2_0_MIR);
-		MPUI1610_RESTORE(OMAP_IH2_1_MIR);
-		MPUI1610_RESTORE(OMAP_IH2_2_MIR);
-		MPUI1610_RESTORE(OMAP_IH2_3_MIR);
-	}
-
-	omap_writew(0, ULPD_SOFT_DISABLE_REQ_REG);
-
-	/*
-	 * Reenable interrupts
-	 */
-
-	local_irq_enable();
-	local_fiq_enable();
-
-	omap_serial_wake_trigger(0);
-
-	printk("PM: OMAP%x is re-starting from deep sleep...\n", system_rev);
-
-	if (machine_is_omap_osk()) {
-		/* Let LED1 (D9) blink again */
-		tps65010_set_led(LED1, BLINK);
-	}
-}
-
-#if defined(DEBUG) && defined(CONFIG_PROC_FS)
-static int g_read_completed;
-
-/*
- * Read system PM registers for debugging
- */
-static int omap_pm_read_proc(
-	char *page_buffer,
-	char **my_first_byte,
-	off_t virtual_start,
-	int length,
-	int *eof,
-	void *data)
-{
-	int my_buffer_offset = 0;
-	char * const my_base = page_buffer;
-
-	ARM_SAVE(ARM_CKCTL);
-	ARM_SAVE(ARM_IDLECT1);
-	ARM_SAVE(ARM_IDLECT2);
-	if (!(cpu_is_omap1510()))
-		ARM_SAVE(ARM_IDLECT3);
-	ARM_SAVE(ARM_EWUPCT);
-	ARM_SAVE(ARM_RSTCT1);
-	ARM_SAVE(ARM_RSTCT2);
-	ARM_SAVE(ARM_SYSST);
-
-	ULPD_SAVE(ULPD_IT_STATUS);
-	ULPD_SAVE(ULPD_CLOCK_CTRL);
-	ULPD_SAVE(ULPD_SOFT_REQ);
-	ULPD_SAVE(ULPD_STATUS_REQ);
-	ULPD_SAVE(ULPD_DPLL_CTRL);
-	ULPD_SAVE(ULPD_POWER_CTRL);
-
-	if (cpu_is_omap730()) {
-		MPUI730_SAVE(MPUI_CTRL);
-		MPUI730_SAVE(MPUI_DSP_STATUS);
-		MPUI730_SAVE(MPUI_DSP_BOOT_CONFIG);
-		MPUI730_SAVE(MPUI_DSP_API_CONFIG);
-		MPUI730_SAVE(EMIFF_SDRAM_CONFIG);
-		MPUI730_SAVE(EMIFS_CONFIG);
-	} else if (cpu_is_omap1510()) {
-		MPUI1510_SAVE(MPUI_CTRL);
-		MPUI1510_SAVE(MPUI_DSP_STATUS);
-		MPUI1510_SAVE(MPUI_DSP_BOOT_CONFIG);
-		MPUI1510_SAVE(MPUI_DSP_API_CONFIG);
-		MPUI1510_SAVE(EMIFF_SDRAM_CONFIG);
-		MPUI1510_SAVE(EMIFS_CONFIG);
-	} else if (cpu_is_omap16xx()) {
-		MPUI1610_SAVE(MPUI_CTRL);
-		MPUI1610_SAVE(MPUI_DSP_STATUS);
-		MPUI1610_SAVE(MPUI_DSP_BOOT_CONFIG);
-		MPUI1610_SAVE(MPUI_DSP_API_CONFIG);
-		MPUI1610_SAVE(EMIFF_SDRAM_CONFIG);
-		MPUI1610_SAVE(EMIFS_CONFIG);
-	}
-
-	if (virtual_start == 0) {
-		g_read_completed = 0;
-
-		my_buffer_offset += sprintf(my_base + my_buffer_offset,
-		   "ARM_CKCTL_REG:            0x%-8x     \n"
-		   "ARM_IDLECT1_REG:          0x%-8x     \n"
-		   "ARM_IDLECT2_REG:          0x%-8x     \n"
-		   "ARM_IDLECT3_REG:	      0x%-8x     \n"
-		   "ARM_EWUPCT_REG:           0x%-8x     \n"
-		   "ARM_RSTCT1_REG:           0x%-8x     \n"
-		   "ARM_RSTCT2_REG:           0x%-8x     \n"
-		   "ARM_SYSST_REG:            0x%-8x     \n"
-		   "ULPD_IT_STATUS_REG:       0x%-4x     \n"
-		   "ULPD_CLOCK_CTRL_REG:      0x%-4x     \n"
-		   "ULPD_SOFT_REQ_REG:        0x%-4x     \n"
-		   "ULPD_DPLL_CTRL_REG:       0x%-4x     \n"
-		   "ULPD_STATUS_REQ_REG:      0x%-4x     \n"
-		   "ULPD_POWER_CTRL_REG:      0x%-4x     \n",
-		   ARM_SHOW(ARM_CKCTL),
-		   ARM_SHOW(ARM_IDLECT1),
-		   ARM_SHOW(ARM_IDLECT2),
-		   ARM_SHOW(ARM_IDLECT3),
-		   ARM_SHOW(ARM_EWUPCT),
-		   ARM_SHOW(ARM_RSTCT1),
-		   ARM_SHOW(ARM_RSTCT2),
-		   ARM_SHOW(ARM_SYSST),
-		   ULPD_SHOW(ULPD_IT_STATUS),
-		   ULPD_SHOW(ULPD_CLOCK_CTRL),
-		   ULPD_SHOW(ULPD_SOFT_REQ),
-		   ULPD_SHOW(ULPD_DPLL_CTRL),
-		   ULPD_SHOW(ULPD_STATUS_REQ),
-		   ULPD_SHOW(ULPD_POWER_CTRL));
-
-		if (cpu_is_omap730()) {
-			my_buffer_offset += sprintf(my_base + my_buffer_offset,
-			   "MPUI730_CTRL_REG	     0x%-8x \n"
-			   "MPUI730_DSP_STATUS_REG:      0x%-8x \n"
-			   "MPUI730_DSP_BOOT_CONFIG_REG: 0x%-8x \n"
-	 "MPUI730_DSP_API_CONFIG_REG:  0x%-8x \n"
-	 "MPUI730_SDRAM_CONFIG_REG:    0x%-8x \n"
-	 "MPUI730_EMIFS_CONFIG_REG:    0x%-8x \n",
-	 MPUI730_SHOW(MPUI_CTRL),
-	 MPUI730_SHOW(MPUI_DSP_STATUS),
-	 MPUI730_SHOW(MPUI_DSP_BOOT_CONFIG),
-	 MPUI730_SHOW(MPUI_DSP_API_CONFIG),
-	 MPUI730_SHOW(EMIFF_SDRAM_CONFIG),
-	 MPUI730_SHOW(EMIFS_CONFIG));
-		} else if (cpu_is_omap1510()) {
-			my_buffer_offset += sprintf(my_base + my_buffer_offset,
-			   "MPUI1510_CTRL_REG             0x%-8x \n"
-			   "MPUI1510_DSP_STATUS_REG:      0x%-8x \n"
-			   "MPUI1510_DSP_BOOT_CONFIG_REG: 0x%-8x \n"
-		   	   "MPUI1510_DSP_API_CONFIG_REG:  0x%-8x \n"
-		   	   "MPUI1510_SDRAM_CONFIG_REG:    0x%-8x \n"
-		   	   "MPUI1510_EMIFS_CONFIG_REG:    0x%-8x \n",
-		   	   MPUI1510_SHOW(MPUI_CTRL),
-		   	   MPUI1510_SHOW(MPUI_DSP_STATUS),
-		   	   MPUI1510_SHOW(MPUI_DSP_BOOT_CONFIG),
-		   	   MPUI1510_SHOW(MPUI_DSP_API_CONFIG),
-		   	   MPUI1510_SHOW(EMIFF_SDRAM_CONFIG),
-		   	   MPUI1510_SHOW(EMIFS_CONFIG));
-		} else if (cpu_is_omap16xx()) {
-			my_buffer_offset += sprintf(my_base + my_buffer_offset,
-			   "MPUI1610_CTRL_REG             0x%-8x \n"
-			   "MPUI1610_DSP_STATUS_REG:      0x%-8x \n"
-			   "MPUI1610_DSP_BOOT_CONFIG_REG: 0x%-8x \n"
-		   	   "MPUI1610_DSP_API_CONFIG_REG:  0x%-8x \n"
-		   	   "MPUI1610_SDRAM_CONFIG_REG:    0x%-8x \n"
-		   	   "MPUI1610_EMIFS_CONFIG_REG:    0x%-8x \n",
-		   	   MPUI1610_SHOW(MPUI_CTRL),
-		   	   MPUI1610_SHOW(MPUI_DSP_STATUS),
-		   	   MPUI1610_SHOW(MPUI_DSP_BOOT_CONFIG),
-		   	   MPUI1610_SHOW(MPUI_DSP_API_CONFIG),
-		   	   MPUI1610_SHOW(EMIFF_SDRAM_CONFIG),
-		   	   MPUI1610_SHOW(EMIFS_CONFIG));
-		}
-
-		g_read_completed++;
-	} else if (g_read_completed >= 1) {
-		 *eof = 1;
-		 return 0;
-	}
-	g_read_completed++;
-
-	*my_first_byte = page_buffer;
-	return  my_buffer_offset;
-}
-
-static void omap_pm_init_proc(void)
-{
-	struct proc_dir_entry *entry;
-
-	entry = create_proc_read_entry("driver/omap_pm",
-				       S_IWUSR | S_IRUGO, NULL,
-	   omap_pm_read_proc, NULL);
-}
-
-#endif /* DEBUG && CONFIG_PROC_FS */
-
-/*
- *	omap_pm_prepare - Do preliminary suspend work.
- *	@state:		suspend state we're entering.
- *
- */
-//#include <asm/hardware.h>
-
-static int omap_pm_prepare(suspend_state_t state)
-{
-	int error = 0;
-
-	switch (state)
-	{
-	case PM_SUSPEND_STANDBY:
-	case PM_SUSPEND_MEM:
-		break;
-
-	case PM_SUSPEND_DISK:
-		return -ENOTSUPP;
-
-	default:
-		return -EINVAL;
-	}
-
-	return error;
-}
-
-
-/*
- *	omap_pm_enter - Actually enter a sleep state.
- *	@state:		State we're entering.
- *
- */
-
-static int omap_pm_enter(suspend_state_t state)
-{
-	switch (state)
-	{
-	case PM_SUSPEND_STANDBY:
-	case PM_SUSPEND_MEM:
-		omap_pm_suspend();
-		break;
-
-	case PM_SUSPEND_DISK:
-		return -ENOTSUPP;
-
-	default:
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-
-/**
- *	omap_pm_finish - Finish up suspend sequence.
- *	@state:		State we're coming out of.
- *
- *	This is called after we wake back up (or if entering the sleep state
- *	failed).
- */
-
-static int omap_pm_finish(suspend_state_t state)
-{
-	return 0;
-}
-
-
-static irqreturn_t  omap_wakeup_interrupt(int  irq, void *  dev,
-				     struct pt_regs *  regs)
-{
-	return IRQ_HANDLED;
-}
-
-static struct irqaction omap_wakeup_irq = {
-	.name		= "peripheral wakeup",
-	.flags		= IRQF_DISABLED,
-	.handler	= omap_wakeup_interrupt
-};
-
-
-
-static struct pm_ops omap_pm_ops ={
-	.pm_disk_mode = 0,
-        .prepare        = omap_pm_prepare,
-        .enter          = omap_pm_enter,
-        .finish         = omap_pm_finish,
-};
-
-static int __init omap_pm_init(void)
-{
-	printk("Power Management for TI OMAP.\n");
-	/*
-	 * We copy the assembler sleep/wakeup routines to SRAM.
-	 * These routines need to be in SRAM as that's the only
-	 * memory the MPU can see when it wakes up.
-	 */
-	if (cpu_is_omap730()) {
-		omap_sram_idle = omap_sram_push(omap730_idle_loop_suspend,
-						omap730_idle_loop_suspend_sz);
-		omap_sram_suspend = omap_sram_push(omap730_cpu_suspend,
-	 omap730_cpu_suspend_sz);
-	} else if (cpu_is_omap1510()) {
-		omap_sram_idle = omap_sram_push(omap1510_idle_loop_suspend,
-						omap1510_idle_loop_suspend_sz);
-		omap_sram_suspend = omap_sram_push(omap1510_cpu_suspend,
-						   omap1510_cpu_suspend_sz);
-	} else if (cpu_is_omap16xx()) {
-		omap_sram_idle = omap_sram_push(omap1610_idle_loop_suspend,
-						omap1610_idle_loop_suspend_sz);
-		omap_sram_suspend = omap_sram_push(omap1610_cpu_suspend,
-						   omap1610_cpu_suspend_sz);
-	}
-
-	if (omap_sram_idle == NULL || omap_sram_suspend == NULL) {
-		printk(KERN_ERR "PM not initialized: Missing SRAM support\n");
-		return -ENODEV;
-	}
-
-	pm_idle = omap_pm_idle;
-
-	if (cpu_is_omap730())
-		setup_irq(INT_730_WAKE_UP_REQ, &omap_wakeup_irq);
-	else if (cpu_is_omap16xx())
-		setup_irq(INT_1610_WAKE_UP_REQ, &omap_wakeup_irq);
-
-#if 0
-	/* --- BEGIN BOARD-DEPENDENT CODE --- */
-	/* Sleepx mask direction */
-	omap_writew((omap_readw(0xfffb5008) & ~2), 0xfffb5008);
-	/* Unmask sleepx signal */
-	omap_writew((omap_readw(0xfffb5004) & ~2), 0xfffb5004);
-	/* --- END BOARD-DEPENDENT CODE --- */
-#endif
-
-	/* Program new power ramp-up time
-	 * (0 for most boards since we don't lower voltage when in deep sleep)
-	 */
-	omap_writew(ULPD_SETUP_ANALOG_CELL_3_VAL, ULPD_SETUP_ANALOG_CELL_3);
-
-	/* Setup ULPD POWER_CTRL_REG - enter deep sleep whenever possible */
-	omap_writew(ULPD_POWER_CTRL_REG_VAL, ULPD_POWER_CTRL);
-
-	/* Configure IDLECT3 */
-	if (cpu_is_omap730())
-		omap_writel(OMAP730_IDLECT3_VAL, OMAP730_IDLECT3);
-	else if (cpu_is_omap16xx())
-		omap_writel(OMAP1610_IDLECT3_VAL, OMAP1610_IDLECT3);
-
-	pm_set_ops(&omap_pm_ops);
-
-#if defined(DEBUG) && defined(CONFIG_PROC_FS)
-	omap_pm_init_proc();
-#endif
-
-	if (cpu_is_omap16xx()) {
-		/* configure LOW_PWR pin */
-		omap_cfg_reg(T20_1610_LOW_PWR);
-	}
-
-	return 0;
-}
-__initcall(omap_pm_init);
-
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index e75718301b0f..19014b2ff4c6 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -174,10 +174,7 @@ void __init omap_map_sram(void)
 	if (cpu_is_omap24xx()) {
 		omap_sram_io_desc[0].virtual = OMAP2_SRAM_VA;
 
-		if (is_sram_locked())
-			base = OMAP2_SRAM_PUB_PA;
-		else
-			base = OMAP2_SRAM_PA;
+		base = OMAP2_SRAM_PA;
 		base = ROUND_DOWN(base, PAGE_SIZE);
 		omap_sram_io_desc[0].pfn = __phys_to_pfn(base);
 	}
diff --git a/arch/arm/plat-omap/timer32k.c b/arch/arm/plat-omap/timer32k.c
index 281ecc7fcdfc..cf6df3378d37 100644
--- a/arch/arm/plat-omap/timer32k.c
+++ b/arch/arm/plat-omap/timer32k.c
@@ -105,6 +105,8 @@ static inline unsigned long omap_32k_timer_read(int reg)
 
 static inline void omap_32k_timer_start(unsigned long load_val)
 {
+	if (!load_val)
+		load_val = 1;
 	omap_32k_timer_write(load_val, OMAP1_32K_TIMER_TVR);
 	omap_32k_timer_write(0x0f, OMAP1_32K_TIMER_CR);
 }
@@ -192,14 +194,11 @@ unsigned long long sched_clock(void)
  * issues with dynamic tick. In the dynamic tick case, we need to lock
  * with irqsave.
  */
-static irqreturn_t omap_32k_timer_interrupt(int irq, void *dev_id,
-					    struct pt_regs *regs)
+static inline irqreturn_t _omap_32k_timer_interrupt(int irq, void *dev_id,
+					struct pt_regs *regs)
 {
-	unsigned long flags;
 	unsigned long now;
 
-	write_seqlock_irqsave(&xtime_lock, flags);
-
 	omap_32k_timer_ack_irq();
 	now = omap_32k_sync_timer_read();
 
@@ -215,6 +214,23 @@ static irqreturn_t omap_32k_timer_interrupt(int irq, void *dev_id,
 	 * continuous timer can be overridden from pm_idle to be longer.
 	 */
 	omap_32k_timer_start(omap_32k_last_tick + OMAP_32K_TICKS_PER_HZ - now);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t omap_32k_timer_handler(int irq, void *dev_id,
+					struct pt_regs *regs)
+{
+	return _omap_32k_timer_interrupt(irq, dev_id, regs);
+}
+
+static irqreturn_t omap_32k_timer_interrupt(int irq, void *dev_id,
+					    struct pt_regs *regs)
+{
+	unsigned long flags;
+
+	write_seqlock_irqsave(&xtime_lock, flags);
+	_omap_32k_timer_interrupt(irq, dev_id, regs);
 	write_sequnlock_irqrestore(&xtime_lock, flags);
 
 	return IRQ_HANDLED;
@@ -230,7 +246,15 @@ static irqreturn_t omap_32k_timer_interrupt(int irq, void *dev_id,
  */
 void omap_32k_timer_reprogram(unsigned long next_tick)
 {
-	omap_32k_timer_start(JIFFIES_TO_HW_TICKS(next_tick, 32768) + 1);
+	unsigned long ticks = JIFFIES_TO_HW_TICKS(next_tick, 32768) + 1;
+	unsigned long now = omap_32k_sync_timer_read();
+	unsigned long idled = now - omap_32k_last_tick;
+
+	if (idled + 1 < ticks)
+		ticks -= idled;
+	else
+		ticks = 1;
+	omap_32k_timer_start(ticks);
 }
 
 static struct irqaction omap_32k_timer_irq;
@@ -252,7 +276,7 @@ static struct dyn_tick_timer omap_dyn_tick_timer = {
 	.enable		= omap_32k_timer_enable_dyn_tick,
 	.disable	= omap_32k_timer_disable_dyn_tick,
 	.reprogram	= omap_32k_timer_reprogram,
-	.handler	= omap_32k_timer_interrupt,
+	.handler	= omap_32k_timer_handler,
 };
 #endif	/* CONFIG_NO_IDLE_HZ */
 
diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types
index e1372a25311d..b02af1d740fa 100644
--- a/arch/arm/tools/mach-types
+++ b/arch/arm/tools/mach-types
@@ -12,7 +12,7 @@
 #
 #   http://www.arm.linux.org.uk/developer/machines/?action=new
 #
-# Last update: Mon Jun 26 22:26:08 2006
+# Last update: Sat Sep 23 13:20:43 2006
 #
 # machine_is_xxx	CONFIG_xxxx		MACH_TYPE_xxx		number
 #
@@ -329,7 +329,7 @@ nimbra29x		ARCH_NIMBRA29X		NIMBRA29X		311
 nimbra210		ARCH_NIMBRA210		NIMBRA210		312
 hhp_d95xx		ARCH_HHP_D95XX		HHP_D95XX		313
 labarm			ARCH_LABARM		LABARM			314
-comcerto		ARCH_M825XX		M825XX			315
+m825xx			ARCH_M825XX		M825XX			315
 m7100			SA1100_M7100		M7100			316
 nipc2			ARCH_NIPC2		NIPC2			317
 fu7202			ARCH_FU7202		FU7202			318
@@ -857,12 +857,12 @@ osiris			MACH_OSIRIS		OSIRIS			842
 maestro			MACH_MAESTRO		MAESTRO			843
 tunge2			MACH_TUNGE2		TUNGE2			844
 ixbbm			MACH_IXBBM		IXBBM			845
-mx27ads			MACH_MX27		MX27			846
+mx27ads			MACH_MX27ADS		MX27ADS			846
 ax8004			MACH_AX8004		AX8004			847
 at91sam9261ek		MACH_AT91SAM9261EK	AT91SAM9261EK		848
 loft			MACH_LOFT		LOFT			849
 magpie			MACH_MAGPIE		MAGPIE			850
-mx21ads			MACH_MX21		MX21			851
+mx21ads			MACH_MX21ADS		MX21ADS			851
 mb87m3400		MACH_MB87M3400		MB87M3400		852
 mguard_delta		MACH_MGUARD_DELTA	MGUARD_DELTA		853
 davinci_dvdp		MACH_DAVINCI_DVDP	DAVINCI_DVDP		854
@@ -1058,7 +1058,7 @@ akai9307		MACH_AKAI9307		AKAI9307		1044
 fontaine		MACH_FONTAINE		FONTAINE		1045
 wombat			MACH_WOMBAT		WOMBAT			1046
 acq300			MACH_ACQ300		ACQ300			1047
-mod_270			MACH_MOD_270		MOD_270			1048
+mod272			MACH_MOD_270		MOD_270			1048
 vmc_vc0820		MACH_VC0820		VC0820			1049
 ani_aim			MACH_ANI_AIM		ANI_AIM			1050
 jellyfish		MACH_JELLYFISH		JELLYFISH		1051
@@ -1093,3 +1093,67 @@ msm6100			MACH_MSM6100		MSM6100			1079
 eti_b1			MACH_ETI_B1		ETI_B1			1080
 za9l_series		MACH_ZILOG_ZA9L		ZILOG_ZA9L		1081
 bit2440			MACH_BIT2440		BIT2440			1082
+nbi			MACH_NBI		NBI			1083
+smdk2443		MACH_SMDK2443		SMDK2443		1084
+vdavinci		MACH_VDAVINCI		VDAVINCI		1085
+atc6			MACH_ATC6		ATC6			1086
+multmdw			MACH_MULTMDW		MULTMDW			1087
+mba2440			MACH_MBA2440		MBA2440			1088
+ecsd			MACH_ECSD		ECSD			1089
+zire31			MACH_ZIRE31		ZIRE31			1090
+fsg			MACH_FSG		FSG			1091
+razor101		MACH_RAZOR101		RAZOR101		1092
+opera_tdm		MACH_OPERA_TDM		OPERA_TDM		1093
+comcerto		MACH_COMCERTO		COMCERTO		1094
+tb0319			MACH_TB0319		TB0319			1095
+kws8000			MACH_KWS8000		KWS8000			1096
+b2			MACH_B2			B2			1097
+lcl54			MACH_LCL54		LCL54			1098
+at91sam9260ek		MACH_AT91SAM9260EK	AT91SAM9260EK		1099
+glantank		MACH_GLANTANK		GLANTANK		1100
+n2100			MACH_N2100		N2100			1101
+n4100			MACH_N4100		N4100			1102
+rsc4			MACH_VERTICAL_RSC4	VERTICAL_RSC4		1103
+sg8100			MACH_SG8100		SG8100			1104
+im42xx			MACH_IM42XX		IM42XX			1105
+ftxx			MACH_FTXX		FTXX			1106
+lwfusion		MACH_LWFUSION		LWFUSION		1107
+qt2410			MACH_QT2410		QT2410			1108
+kixrp435		MACH_KIXRP435		KIXRP435		1109
+ccw9c			MACH_CCW9C		CCW9C			1110
+dabhs			MACH_DABHS		DABHS			1111
+gzmx			MACH_GZMX		GZMX			1112
+ipnw100ap		MACH_IPNW100AP		IPNW100AP		1113
+cc9p9360dev		MACH_CC9P9360DEV	CC9P9360DEV		1114
+cc9p9750dev		MACH_CC9P9750DEV	CC9P9750DEV		1115
+cc9p9360val		MACH_CC9P9360VAL	CC9P9360VAL		1116
+cc9p9750val		MACH_CC9P9750VAL	CC9P9750VAL		1117
+nx70v			MACH_NX70V		NX70V			1118
+at91rm9200df		MACH_AT91RM9200DF	AT91RM9200DF		1119
+se_pilot2		MACH_SE_PILOT2		SE_PILOT2		1120
+mtcn_t800		MACH_MTCN_T800		MTCN_T800		1121
+vcmx212			MACH_VCMX212		VCMX212			1122
+lynx			MACH_LYNX		LYNX			1123
+at91sam9260id		MACH_AT91SAM9260ID	AT91SAM9260ID		1124
+hw86052			MACH_HW86052		HW86052			1125
+pilz_pmi3		MACH_PILZ_PMI3		PILZ_PMI3		1126
+edb9302a		MACH_EDB9302A		EDB9302A		1127
+edb9307a		MACH_EDB9307A		EDB9307A		1128
+ct_dfs			MACH_CT_DFS		CT_DFS			1129
+pilz_pmi4		MACH_PILZ_PMI4		PILZ_PMI4		1130
+xceednp_ixp		MACH_XCEEDNP_IXP	XCEEDNP_IXP		1131
+smdk2442b		MACH_SMDK2442B		SMDK2442B		1132
+xnode			MACH_XNODE		XNODE			1133
+aidx270			MACH_AIDX270		AIDX270			1134
+rema			MACH_REMA		REMA			1135
+bps1000			MACH_BPS1000		BPS1000			1136
+hw90350			MACH_HW90350		HW90350			1137
+omap_sdp3430		MACH_OMAP_SDP3430	OMAP_SDP3430		1138
+bluetouch		MACH_BLUETOUCH		BLUETOUCH		1139
+vstms			MACH_VSTMS		VSTMS			1140
+xsbase270		MACH_XSBASE270		XSBASE270		1141
+at91sam9260ek_cn	MACH_AT91SAM9260EK_CN	AT91SAM9260EK_CN	1142
+adsturboxb		MACH_ADSTURBOXB		ADSTURBOXB		1143
+oti4110			MACH_OTI4110		OTI4110			1144
+hme_pxa			MACH_HME_PXA		HME_PXA			1145
+deisterdca		MACH_DEISTERDCA		DEISTERDCA		1146
diff --git a/arch/arm/vfp/vfp.h b/arch/arm/vfp/vfp.h
index 96fdf30f6a3b..f2797896e6d5 100644
--- a/arch/arm/vfp/vfp.h
+++ b/arch/arm/vfp/vfp.h
@@ -355,3 +355,18 @@ u32 vfp_estimate_sqrt_significand(u32 exponent, u32 significand);
  * we check for an error.
  */
 #define VFP_EXCEPTION_ERROR	((u32)-1 & ~VFP_NAN_FLAG)
+
+/*
+ * A flag to tell vfp instruction type.
+ *  OP_SCALAR - this operation always operates in scalar mode
+ *  OP_SD - the instruction exceptionally writes to a single precision result.
+ *  OP_DD - the instruction exceptionally writes to a double precision result.
+ */
+#define OP_SCALAR	(1 << 0)
+#define OP_SD		(1 << 1)
+#define OP_DD		(1 << 1)
+
+struct op {
+	u32 (* const fn)(int dd, int dn, int dm, u32 fpscr);
+	u32 flags;
+};
diff --git a/arch/arm/vfp/vfpdouble.c b/arch/arm/vfp/vfpdouble.c
index add48e36c2dc..4fc05ee0a2ef 100644
--- a/arch/arm/vfp/vfpdouble.c
+++ b/arch/arm/vfp/vfpdouble.c
@@ -659,22 +659,22 @@ static u32 vfp_double_ftosiz(int dd, int unused, int dm, u32 fpscr)
 }
 
 
-static u32 (* const fop_extfns[32])(int dd, int unused, int dm, u32 fpscr) = {
-	[FEXT_TO_IDX(FEXT_FCPY)]	= vfp_double_fcpy,
-	[FEXT_TO_IDX(FEXT_FABS)]	= vfp_double_fabs,
-	[FEXT_TO_IDX(FEXT_FNEG)]	= vfp_double_fneg,
-	[FEXT_TO_IDX(FEXT_FSQRT)]	= vfp_double_fsqrt,
-	[FEXT_TO_IDX(FEXT_FCMP)]	= vfp_double_fcmp,
-	[FEXT_TO_IDX(FEXT_FCMPE)]	= vfp_double_fcmpe,
-	[FEXT_TO_IDX(FEXT_FCMPZ)]	= vfp_double_fcmpz,
-	[FEXT_TO_IDX(FEXT_FCMPEZ)]	= vfp_double_fcmpez,
-	[FEXT_TO_IDX(FEXT_FCVT)]	= vfp_double_fcvts,
-	[FEXT_TO_IDX(FEXT_FUITO)]	= vfp_double_fuito,
-	[FEXT_TO_IDX(FEXT_FSITO)]	= vfp_double_fsito,
-	[FEXT_TO_IDX(FEXT_FTOUI)]	= vfp_double_ftoui,
-	[FEXT_TO_IDX(FEXT_FTOUIZ)]	= vfp_double_ftouiz,
-	[FEXT_TO_IDX(FEXT_FTOSI)]	= vfp_double_ftosi,
-	[FEXT_TO_IDX(FEXT_FTOSIZ)]	= vfp_double_ftosiz,
+static struct op fops_ext[32] = {
+	[FEXT_TO_IDX(FEXT_FCPY)]	= { vfp_double_fcpy,   0 },
+	[FEXT_TO_IDX(FEXT_FABS)]	= { vfp_double_fabs,   0 },
+	[FEXT_TO_IDX(FEXT_FNEG)]	= { vfp_double_fneg,   0 },
+	[FEXT_TO_IDX(FEXT_FSQRT)]	= { vfp_double_fsqrt,  0 },
+	[FEXT_TO_IDX(FEXT_FCMP)]	= { vfp_double_fcmp,   OP_SCALAR },
+	[FEXT_TO_IDX(FEXT_FCMPE)]	= { vfp_double_fcmpe,  OP_SCALAR },
+	[FEXT_TO_IDX(FEXT_FCMPZ)]	= { vfp_double_fcmpz,  OP_SCALAR },
+	[FEXT_TO_IDX(FEXT_FCMPEZ)]	= { vfp_double_fcmpez, OP_SCALAR },
+	[FEXT_TO_IDX(FEXT_FCVT)]	= { vfp_double_fcvts,  OP_SCALAR|OP_SD },
+	[FEXT_TO_IDX(FEXT_FUITO)]	= { vfp_double_fuito,  OP_SCALAR },
+	[FEXT_TO_IDX(FEXT_FSITO)]	= { vfp_double_fsito,  OP_SCALAR },
+	[FEXT_TO_IDX(FEXT_FTOUI)]	= { vfp_double_ftoui,  OP_SCALAR|OP_SD },
+	[FEXT_TO_IDX(FEXT_FTOUIZ)]	= { vfp_double_ftouiz, OP_SCALAR|OP_SD },
+	[FEXT_TO_IDX(FEXT_FTOSI)]	= { vfp_double_ftosi,  OP_SCALAR|OP_SD },
+	[FEXT_TO_IDX(FEXT_FTOSIZ)]	= { vfp_double_ftosiz, OP_SCALAR|OP_SD },
 };
 
 
@@ -1108,16 +1108,16 @@ static u32 vfp_double_fdiv(int dd, int dn, int dm, u32 fpscr)
 	return FPSCR_IOC;
 }
 
-static u32 (* const fop_fns[16])(int dd, int dn, int dm, u32 fpscr) = {
-	[FOP_TO_IDX(FOP_FMAC)]	= vfp_double_fmac,
-	[FOP_TO_IDX(FOP_FNMAC)]	= vfp_double_fnmac,
-	[FOP_TO_IDX(FOP_FMSC)]	= vfp_double_fmsc,
-	[FOP_TO_IDX(FOP_FNMSC)]	= vfp_double_fnmsc,
-	[FOP_TO_IDX(FOP_FMUL)]	= vfp_double_fmul,
-	[FOP_TO_IDX(FOP_FNMUL)]	= vfp_double_fnmul,
-	[FOP_TO_IDX(FOP_FADD)]	= vfp_double_fadd,
-	[FOP_TO_IDX(FOP_FSUB)]	= vfp_double_fsub,
-	[FOP_TO_IDX(FOP_FDIV)]	= vfp_double_fdiv,
+static struct op fops[16] = {
+	[FOP_TO_IDX(FOP_FMAC)]	= { vfp_double_fmac,  0 },
+	[FOP_TO_IDX(FOP_FNMAC)]	= { vfp_double_fnmac, 0 },
+	[FOP_TO_IDX(FOP_FMSC)]	= { vfp_double_fmsc,  0 },
+	[FOP_TO_IDX(FOP_FNMSC)]	= { vfp_double_fnmsc, 0 },
+	[FOP_TO_IDX(FOP_FMUL)]	= { vfp_double_fmul,  0 },
+	[FOP_TO_IDX(FOP_FNMUL)]	= { vfp_double_fnmul, 0 },
+	[FOP_TO_IDX(FOP_FADD)]	= { vfp_double_fadd,  0 },
+	[FOP_TO_IDX(FOP_FSUB)]	= { vfp_double_fsub,  0 },
+	[FOP_TO_IDX(FOP_FDIV)]	= { vfp_double_fdiv,  0 },
 };
 
 #define FREG_BANK(x)	((x) & 0x0c)
@@ -1131,69 +1131,60 @@ u32 vfp_double_cpdo(u32 inst, u32 fpscr)
 	unsigned int dn = vfp_get_dn(inst);
 	unsigned int dm = vfp_get_dm(inst);
 	unsigned int vecitr, veclen, vecstride;
-	u32 (*fop)(int, int, s32, u32);
+	struct op *fop;
 
-	veclen = fpscr & FPSCR_LENGTH_MASK;
 	vecstride = (1 + ((fpscr & FPSCR_STRIDE_MASK) == FPSCR_STRIDE_MASK)) * 2;
 
+	fop = (op == FOP_EXT) ? &fops_ext[FEXT_TO_IDX(inst)] : &fops[FOP_TO_IDX(op)];
+
 	/*
 	 * fcvtds takes an sN register number as destination, not dN.
 	 * It also always operates on scalars.
 	 */
-	if ((inst & FEXT_MASK) == FEXT_FCVT) {
-		veclen = 0;
+	if (fop->flags & OP_SD)
 		dest = vfp_get_sd(inst);
-	} else
+	else
 		dest = vfp_get_dd(inst);
 
 	/*
 	 * If destination bank is zero, vector length is always '1'.
 	 * ARM DDI0100F C5.1.3, C5.3.2.
 	 */
-	if (FREG_BANK(dest) == 0)
+	if ((fop->flags & OP_SCALAR) || (FREG_BANK(dest) == 0))
 		veclen = 0;
+	else
+		veclen = fpscr & FPSCR_LENGTH_MASK;
 
 	pr_debug("VFP: vecstride=%u veclen=%u\n", vecstride,
 		 (veclen >> FPSCR_LENGTH_BIT) + 1);
 
-	fop = (op == FOP_EXT) ? fop_extfns[FEXT_TO_IDX(inst)] : fop_fns[FOP_TO_IDX(op)];
-	if (!fop)
+	if (!fop->fn)
 		goto invalid;
 
 	for (vecitr = 0; vecitr <= veclen; vecitr += 1 << FPSCR_LENGTH_BIT) {
 		u32 except;
+		char type;
 
-		if (op == FOP_EXT && (inst & FEXT_MASK) == FEXT_FCVT)
-			pr_debug("VFP: itr%d (s%u) = op[%u] (d%u)\n",
-				 vecitr >> FPSCR_LENGTH_BIT,
-				 dest, dn, dm);
-		else if (op == FOP_EXT)
-			pr_debug("VFP: itr%d (d%u) = op[%u] (d%u)\n",
+		type = fop->flags & OP_SD ? 's' : 'd';
+		if (op == FOP_EXT)
+			pr_debug("VFP: itr%d (%c%u) = op[%u] (d%u)\n",
 				 vecitr >> FPSCR_LENGTH_BIT,
-				 dest, dn, dm);
+				 type, dest, dn, dm);
 		else
-			pr_debug("VFP: itr%d (d%u) = (d%u) op[%u] (d%u)\n",
+			pr_debug("VFP: itr%d (%c%u) = (d%u) op[%u] (d%u)\n",
 				 vecitr >> FPSCR_LENGTH_BIT,
-				 dest, dn, FOP_TO_IDX(op), dm);
+				 type, dest, dn, FOP_TO_IDX(op), dm);
 
-		except = fop(dest, dn, dm, fpscr);
+		except = fop->fn(dest, dn, dm, fpscr);
 		pr_debug("VFP: itr%d: exceptions=%08x\n",
 			 vecitr >> FPSCR_LENGTH_BIT, except);
 
 		exceptions |= except;
 
 		/*
-		 * This ensures that comparisons only operate on scalars;
-		 * comparisons always return with one FPSCR status bit set.
-		 */
-		if (except & (FPSCR_N|FPSCR_Z|FPSCR_C|FPSCR_V))
-			break;
-
-		/*
 		 * CHECK: It appears to be undefined whether we stop when
 		 * we encounter an exception.  We continue.
 		 */
-
 		dest = FREG_BANK(dest) + ((FREG_IDX(dest) + vecstride) & 6);
 		dn = FREG_BANK(dn) + ((FREG_IDX(dn) + vecstride) & 6);
 		if (FREG_BANK(dm) != 0)
diff --git a/arch/arm/vfp/vfpinstr.h b/arch/arm/vfp/vfpinstr.h
index 6c819aeae006..7f343a4beca0 100644
--- a/arch/arm/vfp/vfpinstr.h
+++ b/arch/arm/vfp/vfpinstr.h
@@ -73,14 +73,14 @@
 
 #define fmrx(_vfp_) ({			\
 	u32 __v;			\
-	asm("mrc%? p10, 7, %0, " vfpreg(_vfp_) ", cr0, 0 @ fmrx	%0, " #_vfp_	\
-	    : "=r" (__v));		\
+	asm("mrc p10, 7, %0, " vfpreg(_vfp_) ", cr0, 0 @ fmrx	%0, " #_vfp_	\
+	    : "=r" (__v) : : "cc");	\
 	__v;				\
  })
 
 #define fmxr(_vfp_,_var_)		\
-	asm("mcr%? p10, 7, %0, " vfpreg(_vfp_) ", cr0, 0 @ fmxr	" #_vfp_ ", %0"	\
-	   : : "r" (_var_))
+	asm("mcr p10, 7, %0, " vfpreg(_vfp_) ", cr0, 0 @ fmxr	" #_vfp_ ", %0"	\
+	   : : "r" (_var_) : "cc")
 
 u32 vfp_single_cpdo(u32 inst, u32 fpscr);
 u32 vfp_single_cprt(u32 inst, u32 fpscr, struct pt_regs *regs);
diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c
index 4178f6cc3d37..dedbb449632e 100644
--- a/arch/arm/vfp/vfpmodule.c
+++ b/arch/arm/vfp/vfpmodule.c
@@ -40,10 +40,19 @@ unsigned int VFP_arch;
 static int vfp_notifier(struct notifier_block *self, unsigned long cmd, void *v)
 {
 	struct thread_info *thread = v;
-	union vfp_state *vfp = &thread->vfpstate;
+	union vfp_state *vfp;
 
-	switch (cmd) {
-	case THREAD_NOTIFY_FLUSH:
+	if (likely(cmd == THREAD_NOTIFY_SWITCH)) {
+		/*
+		 * Always disable VFP so we can lazily save/restore the
+		 * old state.
+		 */
+		fmxr(FPEXC, fmrx(FPEXC) & ~FPEXC_ENABLE);
+		return NOTIFY_DONE;
+	}
+
+	vfp = &thread->vfpstate;
+	if (cmd == THREAD_NOTIFY_FLUSH) {
 		/*
 		 * Per-thread VFP initialisation.
 		 */
@@ -56,29 +65,12 @@ static int vfp_notifier(struct notifier_block *self, unsigned long cmd, void *v)
 		 * Disable VFP to ensure we initialise it first.
 		 */
 		fmxr(FPEXC, fmrx(FPEXC) & ~FPEXC_ENABLE);
-
-		/*
-		 * FALLTHROUGH: Ensure we don't try to overwrite our newly
-		 * initialised state information on the first fault.
-		 */
-
-	case THREAD_NOTIFY_RELEASE:
-		/*
-		 * Per-thread VFP cleanup.
-		 */
-		if (last_VFP_context == vfp)
-			last_VFP_context = NULL;
-		break;
-
-	case THREAD_NOTIFY_SWITCH:
-		/*
-		 * Always disable VFP so we can lazily save/restore the
-		 * old state.
-		 */
-		fmxr(FPEXC, fmrx(FPEXC) & ~FPEXC_ENABLE);
-		break;
 	}
 
+	/* flush and release case: Per-thread VFP cleanup. */
+	if (last_VFP_context == vfp)
+		last_VFP_context = NULL;
+
 	return NOTIFY_DONE;
 }
 
diff --git a/arch/arm/vfp/vfpsingle.c b/arch/arm/vfp/vfpsingle.c
index 8f6c179cafbe..ab5e9503bae5 100644
--- a/arch/arm/vfp/vfpsingle.c
+++ b/arch/arm/vfp/vfpsingle.c
@@ -702,22 +702,22 @@ static u32 vfp_single_ftosiz(int sd, int unused, s32 m, u32 fpscr)
 	return vfp_single_ftosi(sd, unused, m, FPSCR_ROUND_TOZERO);
 }
 
-static u32 (* const fop_extfns[32])(int sd, int unused, s32 m, u32 fpscr) = {
-	[FEXT_TO_IDX(FEXT_FCPY)]	= vfp_single_fcpy,
-	[FEXT_TO_IDX(FEXT_FABS)]	= vfp_single_fabs,
-	[FEXT_TO_IDX(FEXT_FNEG)]	= vfp_single_fneg,
-	[FEXT_TO_IDX(FEXT_FSQRT)]	= vfp_single_fsqrt,
-	[FEXT_TO_IDX(FEXT_FCMP)]	= vfp_single_fcmp,
-	[FEXT_TO_IDX(FEXT_FCMPE)]	= vfp_single_fcmpe,
-	[FEXT_TO_IDX(FEXT_FCMPZ)]	= vfp_single_fcmpz,
-	[FEXT_TO_IDX(FEXT_FCMPEZ)]	= vfp_single_fcmpez,
-	[FEXT_TO_IDX(FEXT_FCVT)]	= vfp_single_fcvtd,
-	[FEXT_TO_IDX(FEXT_FUITO)]	= vfp_single_fuito,
-	[FEXT_TO_IDX(FEXT_FSITO)]	= vfp_single_fsito,
-	[FEXT_TO_IDX(FEXT_FTOUI)]	= vfp_single_ftoui,
-	[FEXT_TO_IDX(FEXT_FTOUIZ)]	= vfp_single_ftouiz,
-	[FEXT_TO_IDX(FEXT_FTOSI)]	= vfp_single_ftosi,
-	[FEXT_TO_IDX(FEXT_FTOSIZ)]	= vfp_single_ftosiz,
+static struct op fops_ext[32] = {
+	[FEXT_TO_IDX(FEXT_FCPY)]	= { vfp_single_fcpy,   0 },
+	[FEXT_TO_IDX(FEXT_FABS)]	= { vfp_single_fabs,   0 },
+	[FEXT_TO_IDX(FEXT_FNEG)]	= { vfp_single_fneg,   0 },
+	[FEXT_TO_IDX(FEXT_FSQRT)]	= { vfp_single_fsqrt,  0 },
+	[FEXT_TO_IDX(FEXT_FCMP)]	= { vfp_single_fcmp,   OP_SCALAR },
+	[FEXT_TO_IDX(FEXT_FCMPE)]	= { vfp_single_fcmpe,  OP_SCALAR },
+	[FEXT_TO_IDX(FEXT_FCMPZ)]	= { vfp_single_fcmpz,  OP_SCALAR },
+	[FEXT_TO_IDX(FEXT_FCMPEZ)]	= { vfp_single_fcmpez, OP_SCALAR },
+	[FEXT_TO_IDX(FEXT_FCVT)]	= { vfp_single_fcvtd,  OP_SCALAR|OP_DD },
+	[FEXT_TO_IDX(FEXT_FUITO)]	= { vfp_single_fuito,  OP_SCALAR },
+	[FEXT_TO_IDX(FEXT_FSITO)]	= { vfp_single_fsito,  OP_SCALAR },
+	[FEXT_TO_IDX(FEXT_FTOUI)]	= { vfp_single_ftoui,  OP_SCALAR },
+	[FEXT_TO_IDX(FEXT_FTOUIZ)]	= { vfp_single_ftouiz, OP_SCALAR },
+	[FEXT_TO_IDX(FEXT_FTOSI)]	= { vfp_single_ftosi,  OP_SCALAR },
+	[FEXT_TO_IDX(FEXT_FTOSIZ)]	= { vfp_single_ftosiz, OP_SCALAR },
 };
 
 
@@ -1151,16 +1151,16 @@ static u32 vfp_single_fdiv(int sd, int sn, s32 m, u32 fpscr)
 	return FPSCR_IOC;
 }
 
-static u32 (* const fop_fns[16])(int sd, int sn, s32 m, u32 fpscr) = {
-	[FOP_TO_IDX(FOP_FMAC)]	= vfp_single_fmac,
-	[FOP_TO_IDX(FOP_FNMAC)]	= vfp_single_fnmac,
-	[FOP_TO_IDX(FOP_FMSC)]	= vfp_single_fmsc,
-	[FOP_TO_IDX(FOP_FNMSC)]	= vfp_single_fnmsc,
-	[FOP_TO_IDX(FOP_FMUL)]	= vfp_single_fmul,
-	[FOP_TO_IDX(FOP_FNMUL)]	= vfp_single_fnmul,
-	[FOP_TO_IDX(FOP_FADD)]	= vfp_single_fadd,
-	[FOP_TO_IDX(FOP_FSUB)]	= vfp_single_fsub,
-	[FOP_TO_IDX(FOP_FDIV)]	= vfp_single_fdiv,
+static struct op fops[16] = {
+	[FOP_TO_IDX(FOP_FMAC)]	= { vfp_single_fmac,  0 },
+	[FOP_TO_IDX(FOP_FNMAC)]	= { vfp_single_fnmac, 0 },
+	[FOP_TO_IDX(FOP_FMSC)]	= { vfp_single_fmsc,  0 },
+	[FOP_TO_IDX(FOP_FNMSC)]	= { vfp_single_fnmsc, 0 },
+	[FOP_TO_IDX(FOP_FMUL)]	= { vfp_single_fmul,  0 },
+	[FOP_TO_IDX(FOP_FNMUL)]	= { vfp_single_fnmul, 0 },
+	[FOP_TO_IDX(FOP_FADD)]	= { vfp_single_fadd,  0 },
+	[FOP_TO_IDX(FOP_FSUB)]	= { vfp_single_fsub,  0 },
+	[FOP_TO_IDX(FOP_FDIV)]	= { vfp_single_fdiv,  0 },
 };
 
 #define FREG_BANK(x)	((x) & 0x18)
@@ -1174,70 +1174,63 @@ u32 vfp_single_cpdo(u32 inst, u32 fpscr)
 	unsigned int sn = vfp_get_sn(inst);
 	unsigned int sm = vfp_get_sm(inst);
 	unsigned int vecitr, veclen, vecstride;
-	u32 (*fop)(int, int, s32, u32);
+	struct op *fop;
 
-	veclen = fpscr & FPSCR_LENGTH_MASK;
 	vecstride = 1 + ((fpscr & FPSCR_STRIDE_MASK) == FPSCR_STRIDE_MASK);
 
+	fop = (op == FOP_EXT) ? &fops_ext[FEXT_TO_IDX(inst)] : &fops[FOP_TO_IDX(op)];
+
 	/*
 	 * fcvtsd takes a dN register number as destination, not sN.
 	 * Technically, if bit 0 of dd is set, this is an invalid
 	 * instruction.  However, we ignore this for efficiency.
 	 * It also only operates on scalars.
 	 */
-	if ((inst & FEXT_MASK) == FEXT_FCVT) {
-		veclen = 0;
+	if (fop->flags & OP_DD)
 		dest = vfp_get_dd(inst);
-	} else
+	else
 		dest = vfp_get_sd(inst);
 
 	/*
 	 * If destination bank is zero, vector length is always '1'.
 	 * ARM DDI0100F C5.1.3, C5.3.2.
 	 */
-	if (FREG_BANK(dest) == 0)
+	if ((fop->flags & OP_SCALAR) || FREG_BANK(dest) == 0)
 		veclen = 0;
+	else
+		veclen = fpscr & FPSCR_LENGTH_MASK;
 
 	pr_debug("VFP: vecstride=%u veclen=%u\n", vecstride,
 		 (veclen >> FPSCR_LENGTH_BIT) + 1);
 
-	fop = (op == FOP_EXT) ? fop_extfns[FEXT_TO_IDX(inst)] : fop_fns[FOP_TO_IDX(op)];
-	if (!fop)
+	if (!fop->fn)
 		goto invalid;
 
 	for (vecitr = 0; vecitr <= veclen; vecitr += 1 << FPSCR_LENGTH_BIT) {
 		s32 m = vfp_get_float(sm);
 		u32 except;
+		char type;
 
-		if (op == FOP_EXT && (inst & FEXT_MASK) == FEXT_FCVT)
-			pr_debug("VFP: itr%d (d%u) = op[%u] (s%u=%08x)\n",
-				 vecitr >> FPSCR_LENGTH_BIT, dest, sn, sm, m);
-		else if (op == FOP_EXT)
-			pr_debug("VFP: itr%d (s%u) = op[%u] (s%u=%08x)\n",
-				 vecitr >> FPSCR_LENGTH_BIT, dest, sn, sm, m);
+		type = fop->flags & OP_DD ? 'd' : 's';
+		if (op == FOP_EXT)
+			pr_debug("VFP: itr%d (%c%u) = op[%u] (s%u=%08x)\n",
+				 vecitr >> FPSCR_LENGTH_BIT, type, dest, sn,
+				 sm, m);
 		else
-			pr_debug("VFP: itr%d (s%u) = (s%u) op[%u] (s%u=%08x)\n",
-				 vecitr >> FPSCR_LENGTH_BIT, dest, sn,
+			pr_debug("VFP: itr%d (%c%u) = (s%u) op[%u] (s%u=%08x)\n",
+				 vecitr >> FPSCR_LENGTH_BIT, type, dest, sn,
 				 FOP_TO_IDX(op), sm, m);
 
-		except = fop(dest, sn, m, fpscr);
+		except = fop->fn(dest, sn, m, fpscr);
 		pr_debug("VFP: itr%d: exceptions=%08x\n",
 			 vecitr >> FPSCR_LENGTH_BIT, except);
 
 		exceptions |= except;
 
 		/*
-		 * This ensures that comparisons only operate on scalars;
-		 * comparisons always return with one FPSCR status bit set.
-		 */
-		if (except & (FPSCR_N|FPSCR_Z|FPSCR_C|FPSCR_V))
-			break;
-
-		/*
 		 * CHECK: It appears to be undefined whether we stop when
 		 * we encounter an exception.  We continue.
 		 */
-
 		dest = FREG_BANK(dest) + ((FREG_IDX(dest) + vecstride) & 7);
 		sn = FREG_BANK(sn) + ((FREG_IDX(sn) + vecstride) & 7);
 		if (FREG_BANK(sm) != 0)
author	Linus Torvalds <torvalds@g5.osdl.org>	2006-09-28 14:40:39 -0700
committer	Linus Torvalds <torvalds@g5.osdl.org>	2006-09-28 14:40:39 -0700
commit	ebdea46fecae40c4d7effcd33f40918a37a1df4b (patch)
tree	e4312bf7f1f3d184738963a0ec300aa9fdfd55c1 /arch
parent	Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-mmc (diff)
parent	Merge nommu branch (diff)
download	linux-dev-ebdea46fecae40c4d7effcd33f40918a37a1df4b.tar.xz linux-dev-ebdea46fecae40c4d7effcd33f40918a37a1df4b.zip