aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/acpi/acpica/acresrc.h
diff options
context:
space:
mode:
authorMika Westerberg <mika.westerberg@linux.intel.com>2017-06-05 16:39:19 +0800
committerRafael J. Wysocki <rafael.j.wysocki@intel.com>2017-06-12 14:58:39 +0200
commit97028ce6fca0fec53ee71e2fd5acfb2dc8430f1f (patch)
treee9ae63beb8b3e3b2cbf1a07c91b31c19c4d55a76 /drivers/acpi/acpica/acresrc.h
parentACPICA: ACPI 6.2: Add support for PinFunction() resource (diff)
downloadlinux-dev-97028ce6fca0fec53ee71e2fd5acfb2dc8430f1f.tar.xz
linux-dev-97028ce6fca0fec53ee71e2fd5acfb2dc8430f1f.zip
ACPICA: ACPI 6.2: Add support for PinConfig() resource
ACPICA commit a06fdba686cefccd5dd5b93b52fa0f1e3f984906 ACPI 6.2 introduced a new resource that is used to specify fine-grained configuration of a pin or set of pins used by a device. The ASL syntax of this new resource looks like: PinConfig (Shared/Exclusive, PinConfigType, PinConfigValue, ResourceSource, ResourceSourceIndex, ResourceUsage, DescriptorName, Vendordata) {Pin List} PinConfigType is an integer with following accepted values: 0x00 (Default) - No configuration is applied to the pin 0x01 (Bias Pull-up) - Pin is pulled up using certain size resistor 0x02 (Bias Pull-down) - Pin is pulled down using certain size resistor 0x03 (Bias Default) - Set to default biasing 0x04 (Bias Disable) - All bias settings will be disabled 0x05 (Bias High Impedance) - Configure the pin as hi_z 0x06 (Bias Bus Hold) - Configure the pin in a weak latch state where it drives the last value on a tristate bus 0x07 (Drive Open Drain) - Configure the pin into open drain state 0x08 (Drive Open Source) - Configure the pin into open source state 0x09 (Drive Push Pull) - Configure the pin into push-pull state 0x0a (Drive Strength) - How much the pin can supply current 0x0b (Slew Rate) - Configure slew rate of the pin 0x0c (Input Debounce) - Enable input debouncer for the pin 0x0d (Input Schmitt Trigger) - Enable schmitt trigger for the pin 0x0e - 0x7f - Reserved 0x80 - 0xff - Vendor defined types The PinConfigValue depends on the type and is expressed as units suitable for that type (for example bias uses Ohms). Link: https://github.com/acpica/acpica/commit/a06fdba6 Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Diffstat (limited to 'drivers/acpi/acpica/acresrc.h')
-rw-r--r--drivers/acpi/acpica/acresrc.h2
1 files changed, 2 insertions, 0 deletions
diff --git a/drivers/acpi/acpica/acresrc.h b/drivers/acpi/acpica/acresrc.h
index bd238b410c42..61d2ef38a8ed 100644
--- a/drivers/acpi/acpica/acresrc.h
+++ b/drivers/acpi/acpica/acresrc.h
@@ -330,6 +330,7 @@ extern struct acpi_rsconvert_info acpi_rs_convert_i2c_serial_bus[];
extern struct acpi_rsconvert_info acpi_rs_convert_spi_serial_bus[];
extern struct acpi_rsconvert_info acpi_rs_convert_uart_serial_bus[];
extern struct acpi_rsconvert_info acpi_rs_convert_pin_function[];
+extern struct acpi_rsconvert_info acpi_rs_convert_pin_config[];
/* These resources require separate get/set tables */
@@ -380,6 +381,7 @@ extern struct acpi_rsdump_info acpi_rs_dump_i2c_serial_bus[];
extern struct acpi_rsdump_info acpi_rs_dump_spi_serial_bus[];
extern struct acpi_rsdump_info acpi_rs_dump_uart_serial_bus[];
extern struct acpi_rsdump_info acpi_rs_dump_general_flags[];
+extern struct acpi_rsdump_info acpi_rs_dump_pin_config[];
#endif
#endif /* __ACRESRC_H__ */