Merge branch 'for-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata

Pull libata updates from Tejun Heo:
 - Write same support added
 - Minor ahci MSIX irq handling updates
 - Non-critical SCSI command translation fixes
 - Controller specific changes

* 'for-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
  ahci: qoriq: Revert "ahci: qoriq: Disable NCQ on ls2080a SoC"
  libata: remove <asm-generic/libata-portmap.h>
  libata: remove unused definitions from <asm/libata-portmap.h>
  pata_at91: Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR
  ata: Replace BUG() with BUG_ON().
  ata: sata_mv: Replacing dma_pool_alloc and memset with a single call dma_pool_zalloc.
  libata: Some drives failing on SCT Write Same
  ahci: use pci_alloc_irq_vectors
  libata: SCT Write Same handle ATA_DFLAG_PIO
  libata: SCT Write Same / DSM Trim
  libata: Add support for SCT Write Same
  libata: Safely overwrite attached page in WRITE SAME xlat
  ahci: also use a per-port lock for the multi-MSIX case
  ARM: dts: STiH407-family: Add ports-implemented property in sata nodes
  ahci: st: Add ports-implemented property in support
  ahci: qoriq: enable snoopable sata read and write
  ahci: qoriq: adjust sata parameter
  libata-scsi: fix MODE SELECT translation for Control mode page
  libata-scsi: use u8 array to store mode page copy

1 files changed, 32 insertions, 117 deletions

diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 90eabaf81215..ba5f11cebee2 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -1400,142 +1400,56 @@ static irqreturn_t ahci_thunderx_irq_handler(int irq, void *dev_instance)
 }
 #endif
 
-/*
- * ahci_init_msix() - optionally enable per-port MSI-X otherwise defer
- * to single msi.
- */
-static int ahci_init_msix(struct pci_dev *pdev, unsigned int n_ports,
-			  struct ahci_host_priv *hpriv, unsigned long flags)
+static int ahci_get_irq_vector(struct ata_host *host, int port)
 {
-	int nvec, i, rc;
-
-	/* Do not init MSI-X if MSI is disabled for the device */
-	if (hpriv->flags & AHCI_HFLAG_NO_MSI)
-		return -ENODEV;
-
-	nvec = pci_msix_vec_count(pdev);
-	if (nvec < 0)
-		return nvec;
-
-	/*
-	 * Proper MSI-X implementations will have a vector per-port.
-	 * Barring that, we prefer single-MSI over single-MSIX.  If this
-	 * check fails (not enough MSI-X vectors for all ports) we will
-	 * be called again with the flag clear iff ahci_init_msi()
-	 * fails.
-	 */
-	if (flags & AHCI_HFLAG_MULTI_MSIX) {
-		if (nvec < n_ports)
-			return -ENODEV;
-		nvec = n_ports;
-	} else if (nvec) {
-		nvec = 1;
-	} else {
-		/*
-		 * Emit dev_err() since this was the non-legacy irq
-		 * method of last resort.
-		 */
-		rc = -ENODEV;
-		goto fail;
-	}
-
-	for (i = 0; i < nvec; i++)
-		hpriv->msix[i].entry = i;
-	rc = pci_enable_msix_exact(pdev, hpriv->msix, nvec);
-	if (rc < 0)
-		goto fail;
-
-	if (nvec > 1)
-		hpriv->flags |= AHCI_HFLAG_MULTI_MSIX;
-	hpriv->irq = hpriv->msix[0].vector; /* for single msi-x */
-
-	return nvec;
-fail:
-	dev_err(&pdev->dev,
-		"failed to enable MSI-X with error %d, # of vectors: %d\n",
-		rc, nvec);
-
-	return rc;
+	return pci_irq_vector(to_pci_dev(host->dev), port);
 }
 
 static int ahci_init_msi(struct pci_dev *pdev, unsigned int n_ports,
 			struct ahci_host_priv *hpriv)
 {
-	int rc, nvec;
+	int nvec;
 
 	if (hpriv->flags & AHCI_HFLAG_NO_MSI)
 		return -ENODEV;
 
-	nvec = pci_msi_vec_count(pdev);
-	if (nvec < 0)
-		return nvec;
-
 	/*
 	 * If number of MSIs is less than number of ports then Sharing Last
 	 * Message mode could be enforced. In this case assume that advantage
 	 * of multipe MSIs is negated and use single MSI mode instead.
 	 */
-	if (nvec < n_ports)
-		goto single_msi;
-
-	rc = pci_enable_msi_exact(pdev, nvec);
-	if (rc == -ENOSPC)
-		goto single_msi;
-	if (rc < 0)
-		return rc;
+	nvec = pci_alloc_irq_vectors(pdev, n_ports, INT_MAX,
+			PCI_IRQ_MSIX | PCI_IRQ_MSI);
+	if (nvec > 0) {
+		if (!(readl(hpriv->mmio + HOST_CTL) & HOST_MRSM)) {
+			hpriv->get_irq_vector = ahci_get_irq_vector;
+			hpriv->flags |= AHCI_HFLAG_MULTI_MSI;
+			return nvec;
+		}
 
-	/* fallback to single MSI mode if the controller enforced MRSM mode */
-	if (readl(hpriv->mmio + HOST_CTL) & HOST_MRSM) {
-		pci_disable_msi(pdev);
+		/*
+		 * Fallback to single MSI mode if the controller enforced MRSM
+		 * mode.
+		 */
 		printk(KERN_INFO "ahci: MRSM is on, fallback to single MSI\n");
-		goto single_msi;
+		pci_free_irq_vectors(pdev);
 	}
 
-	if (nvec > 1)
-		hpriv->flags |= AHCI_HFLAG_MULTI_MSI;
-
-	goto out;
-
-single_msi:
-	nvec = 1;
-
-	rc = pci_enable_msi(pdev);
-	if (rc < 0)
-		return rc;
-out:
-	hpriv->irq = pdev->irq;
-
-	return nvec;
-}
-
-static int ahci_init_interrupts(struct pci_dev *pdev, unsigned int n_ports,
-				struct ahci_host_priv *hpriv)
-{
-	int nvec;
-
 	/*
-	 * Try to enable per-port MSI-X.  If the host is not capable
-	 * fall back to single MSI before finally attempting single
-	 * MSI-X.
+	 * -ENOSPC indicated we don't have enough vectors.  Don't bother trying
+	 * a single vectors for any other error:
 	 */
-	nvec = ahci_init_msix(pdev, n_ports, hpriv, AHCI_HFLAG_MULTI_MSIX);
-	if (nvec >= 0)
+	if (nvec < 0 && nvec != -ENOSPC)
 		return nvec;
 
-	nvec = ahci_init_msi(pdev, n_ports, hpriv);
-	if (nvec >= 0)
-		return nvec;
-
-	/* try single-msix */
-	nvec = ahci_init_msix(pdev, n_ports, hpriv, 0);
-	if (nvec >= 0)
+	/*
+	 * If the host is not capable of supporting per-port vectors, fall
+	 * back to single MSI before finally attempting single MSI-X.
+	 */
+	nvec = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_MSI);
+	if (nvec == 1)
 		return nvec;
-
-	/* legacy intx interrupts */
-	pci_intx(pdev, 1);
-	hpriv->irq = pdev->irq;
-
-	return 0;
+	return pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_MSIX);
 }
 
 static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
@@ -1698,11 +1612,12 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (!host)
 		return -ENOMEM;
 	host->private_data = hpriv;
-	hpriv->msix = devm_kzalloc(&pdev->dev,
-			sizeof(struct msix_entry) * n_ports, GFP_KERNEL);
-	if (!hpriv->msix)
-		return -ENOMEM;
-	ahci_init_interrupts(pdev, n_ports, hpriv);
+
+	if (ahci_init_msi(pdev, n_ports, hpriv) < 0) {
+		/* legacy intx interrupts */
+		pci_intx(pdev, 1);
+	}
+	hpriv->irq = pdev->irq;
 
 	if (!(hpriv->cap & HOST_CAP_SSS) || ahci_ignore_sss)
 		host->flags |= ATA_HOST_PARALLEL_SCAN;