Merge tag '5.17-net-next' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
 "Core
  ----

   - Defer freeing TCP skbs to the BH handler, whenever possible, or at
     least perform the freeing outside of the socket lock section to
     decrease cross-CPU allocator work and improve latency.

   - Add netdevice refcount tracking to locate sources of netdevice and
     net namespace refcount leaks.

   - Make Tx watchdog less intrusive - avoid pausing Tx and restarting
     all queues from a single CPU removing latency spikes.

   - Various small optimizations throughout the stack from Eric Dumazet.

   - Make netdev->dev_addr[] constant, force modifications to go via
     appropriate helpers to allow us to keep addresses in ordered data
     structures.

   - Replace unix_table_lock with per-hash locks, improving performance
     of bind() calls.

   - Extend skb drop tracepoint with a drop reason.

   - Allow SO_MARK and SO_PRIORITY setsockopt under CAP_NET_RAW.

  BPF
  ---

   - New helpers:
      - bpf_find_vma(), find and inspect VMAs for profiling use cases
      - bpf_loop(), runtime-bounded loop helper trading some execution
        time for much faster (if at all converging) verification
      - bpf_strncmp(), improve performance, avoid compiler flakiness
      - bpf_get_func_arg(), bpf_get_func_ret(), bpf_get_func_arg_cnt()
        for tracing programs, all inlined by the verifier

   - Support BPF relocations (CO-RE) in the kernel loader.

   - Further the support for BTF_TYPE_TAG annotations.

   - Allow access to local storage in sleepable helpers.

   - Convert verifier argument types to a composable form with different
     attributes which can be shared across types (ro, maybe-null).

   - Prepare libbpf for upcoming v1.0 release by cleaning up APIs,
     creating new, extensible ones where missing and deprecating those
     to be removed.

  Protocols
  ---------

   - WiFi (mac80211/cfg80211):
      - notify user space about long "come back in N" AP responses,
        allow it to react to such temporary rejections
      - allow non-standard VHT MCS 10/11 rates
      - use coarse time in airtime fairness code to save CPU cycles

   - Bluetooth:
      - rework of HCI command execution serialization to use a common
        queue and work struct, and improve handling errors reported in
        the middle of a batch of commands
      - rework HCI event handling to use skb_pull_data, avoiding packet
        parsing pitfalls
      - support AOSP Bluetooth Quality Report

   - SMC:
      - support net namespaces, following the RDMA model
      - improve connection establishment latency by pre-clearing buffers
      - introduce TCP ULP for automatic redirection to SMC

   - Multi-Path TCP:
      - support ioctls: SIOCINQ, OUTQ, and OUTQNSD
      - support socket options: IP_TOS, IP_FREEBIND, IP_TRANSPARENT,
        IPV6_FREEBIND, and IPV6_TRANSPARENT, TCP_CORK and TCP_NODELAY
      - support cmsgs: TCP_INQ
      - improvements in the data scheduler (assigning data to subflows)
      - support fastclose option (quick shutdown of the full MPTCP
        connection, similar to TCP RST in regular TCP)

   - MCTP (Management Component Transport) over serial, as defined by
     DMTF spec DSP0253 - "MCTP Serial Transport Binding".

  Driver API
  ----------

   - Support timestamping on bond interfaces in active/passive mode.

   - Introduce generic phylink link mode validation for drivers which
     don't have any quirks and where MAC capability bits fully express
     what's supported. Allow PCS layer to participate in the validation.
     Convert a number of drivers.

   - Add support to set/get size of buffers on the Rx rings and size of
     the tx copybreak buffer via ethtool.

   - Support offloading TC actions as first-class citizens rather than
     only as attributes of filters, improve sharing and device resource
     utilization.

   - WiFi (mac80211/cfg80211):
      - support forwarding offload (ndo_fill_forward_path)
      - support for background radar detection hardware
      - SA Query Procedures offload on the AP side

  New hardware / drivers
  ----------------------

   - tsnep - FPGA based TSN endpoint Ethernet MAC used in PLCs with
     real-time requirements for isochronous communication with protocols
     like OPC UA Pub/Sub.

   - Qualcomm BAM-DMUX WWAN - driver for data channels of modems
     integrated into many older Qualcomm SoCs, e.g. MSM8916 or MSM8974
     (qcom_bam_dmux).

   - Microchip LAN966x multi-port Gigabit AVB/TSN Ethernet Switch driver
     with support for bridging, VLANs and multicast forwarding
     (lan966x).

   - iwlmei driver for co-operating between Intel's WiFi driver and
     Intel's Active Management Technology (AMT) devices.

   - mse102x - Vertexcom MSE102x Homeplug GreenPHY chips

   - Bluetooth:
      - MediaTek MT7921 SDIO devices
      - Foxconn MT7922A
      - Realtek RTL8852AE

  Drivers
  -------

   - Significantly improve performance in the datapaths of: lan78xx,
     ax88179_178a, lantiq_xrx200, bnxt.

   - Intel Ethernet NICs:
      - igb: support PTP/time PEROUT and EXTTS SDP functions on
        82580/i354/i350 adapters
      - ixgbevf: new PF -> VF mailbox API which avoids the risk of
        mailbox corruption with ESXi
      - iavf: support configuration of VLAN features of finer
        granularity, stacked tags and filtering
      - ice: PTP support for new E822 devices with sub-ns precision
      - ice: support firmware activation without reboot

   - Mellanox Ethernet NICs (mlx5):
      - expose control over IRQ coalescing mode (CQE vs EQE) via ethtool
      - support TC forwarding when tunnel encap and decap happen between
        two ports of the same NIC
      - dynamically size and allow disabling various features to save
        resources for running in embedded / SmartNIC scenarios

   - Broadcom Ethernet NICs (bnxt):
      - use page frag allocator to improve Rx performance
      - expose control over IRQ coalescing mode (CQE vs EQE) via ethtool

   - Other Ethernet NICs:
      - amd-xgbe: add Ryzen 6000 (Yellow Carp) Ethernet support

   - Microsoft cloud/virtual NIC (mana):
      - add XDP support (PASS, DROP, TX)

   - Mellanox Ethernet switches (mlxsw):
      - initial support for Spectrum-4 ASICs
      - VxLAN with IPv6 underlay

   - Marvell Ethernet switches (prestera):
      - support flower flow templates
      - add basic IP forwarding support

   - NXP embedded Ethernet switches (ocelot & felix):
      - support Per-Stream Filtering and Policing (PSFP)
      - enable cut-through forwarding between ports by default
      - support FDMA to improve packet Rx/Tx to CPU

   - Other embedded switches:
      - hellcreek: improve trapping management (STP and PTP) packets
      - qca8k: support link aggregation and port mirroring

   - Qualcomm 802.11ax WiFi (ath11k):
      - qca6390, wcn6855: enable 802.11 power save mode in station mode
      - BSS color change support
      - WCN6855 hw2.1 support
      - 11d scan offload support
      - scan MAC address randomization support
      - full monitor mode, only supported on QCN9074
      - qca6390/wcn6855: report signal and tx bitrate
      - qca6390: rfkill support
      - qca6390/wcn6855: regdb.bin support

   - Intel WiFi (iwlwifi):
      - support SAR GEO Offset Mapping (SGOM) and Time-Aware-SAR (TAS)
        in cooperation with the BIOS
      - support for Optimized Connectivity Experience (OCE) scan
      - support firmware API version 68
      - lots of preparatory work for the upcoming Bz device family

   - MediaTek WiFi (mt76):
      - Specific Absorption Rate (SAR) support
      - mt7921: 160 MHz channel support

   - RealTek WiFi (rtw88):
      - Specific Absorption Rate (SAR) support
      - scan offload

   - Other WiFi NICs
      - ath10k: support fetching (pre-)calibration data from nvmem
      - brcmfmac: configure keep-alive packet on suspend
      - wcn36xx: beacon filter support"

* tag '5.17-net-next' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2048 commits)
  tcp: tcp_send_challenge_ack delete useless param `skb`
  net/qla3xxx: Remove useless DMA-32 fallback configuration
  rocker: Remove useless DMA-32 fallback configuration
  hinic: Remove useless DMA-32 fallback configuration
  lan743x: Remove useless DMA-32 fallback configuration
  net: enetc: Remove useless DMA-32 fallback configuration
  cxgb4vf: Remove useless DMA-32 fallback configuration
  cxgb4: Remove useless DMA-32 fallback configuration
  cxgb3: Remove useless DMA-32 fallback configuration
  bnx2x: Remove useless DMA-32 fallback configuration
  et131x: Remove useless DMA-32 fallback configuration
  be2net: Remove useless DMA-32 fallback configuration
  vmxnet3: Remove useless DMA-32 fallback configuration
  bna: Simplify DMA setting
  net: alteon: Simplify DMA setting
  myri10ge: Simplify DMA setting
  qlcnic: Simplify DMA setting
  net: allwinner: Fix print format
  page_pool: remove spinlock in page_pool_refill_alloc_cache()
  amt: fix wrong return type of amt_send_membership_update()
  ...

1 files changed, 238 insertions, 350 deletions

diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 75c83768c257..c30d131da784 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -16,6 +16,7 @@
 #include <linux/of_irq.h>
 #include <linux/suspend.h>
 #include <linux/gpio/consumer.h>
+#include <linux/debugfs.h>
 #include <asm/unaligned.h>
 
 #include <net/bluetooth/bluetooth.h>
@@ -24,13 +25,13 @@
 #include "btintel.h"
 #include "btbcm.h"
 #include "btrtl.h"
+#include "btmtk.h"
 
 #define VERSION "0.8"
 
 static bool disable_scofix;
 static bool force_scofix;
 static bool enable_autosuspend = IS_ENABLED(CONFIG_BT_HCIBTUSB_AUTOSUSPEND);
-
 static bool reset = true;
 
 static struct usb_driver btusb_driver;
@@ -59,6 +60,7 @@ static struct usb_driver btusb_driver;
 #define BTUSB_WIDEBAND_SPEECH	0x400000
 #define BTUSB_VALID_LE_STATES   0x800000
 #define BTUSB_QCA_WCN6855	0x1000000
+#define BTUSB_INTEL_BROKEN_SHUTDOWN_LED	0x2000000
 #define BTUSB_INTEL_BROKEN_INITIAL_NCMD 0x4000000
 
 static const struct usb_device_id btusb_table[] = {
@@ -295,6 +297,24 @@ static const struct usb_device_id blacklist_table[] = {
 	{ USB_DEVICE(0x0cf3, 0xe600), .driver_info = BTUSB_QCA_WCN6855 |
 						     BTUSB_WIDEBAND_SPEECH |
 						     BTUSB_VALID_LE_STATES },
+	{ USB_DEVICE(0x0489, 0xe0cc), .driver_info = BTUSB_QCA_WCN6855 |
+						     BTUSB_WIDEBAND_SPEECH |
+						     BTUSB_VALID_LE_STATES },
+	{ USB_DEVICE(0x0489, 0xe0d6), .driver_info = BTUSB_QCA_WCN6855 |
+						     BTUSB_WIDEBAND_SPEECH |
+						     BTUSB_VALID_LE_STATES },
+	{ USB_DEVICE(0x0489, 0xe0e3), .driver_info = BTUSB_QCA_WCN6855 |
+						     BTUSB_WIDEBAND_SPEECH |
+						     BTUSB_VALID_LE_STATES },
+	{ USB_DEVICE(0x10ab, 0x9309), .driver_info = BTUSB_QCA_WCN6855 |
+						     BTUSB_WIDEBAND_SPEECH |
+						     BTUSB_VALID_LE_STATES },
+	{ USB_DEVICE(0x10ab, 0x9409), .driver_info = BTUSB_QCA_WCN6855 |
+						     BTUSB_WIDEBAND_SPEECH |
+						     BTUSB_VALID_LE_STATES },
+	{ USB_DEVICE(0x0489, 0xe0d0), .driver_info = BTUSB_QCA_WCN6855 |
+						     BTUSB_WIDEBAND_SPEECH |
+						     BTUSB_VALID_LE_STATES },
 
 	/* Broadcom BCM2035 */
 	{ USB_DEVICE(0x0a5c, 0x2009), .driver_info = BTUSB_BCM92035 },
@@ -365,10 +385,13 @@ static const struct usb_device_id blacklist_table[] = {
 	{ USB_DEVICE(0x8087, 0x0033), .driver_info = BTUSB_INTEL_COMBINED },
 	{ USB_DEVICE(0x8087, 0x07da), .driver_info = BTUSB_CSR },
 	{ USB_DEVICE(0x8087, 0x07dc), .driver_info = BTUSB_INTEL_COMBINED |
-						     BTUSB_INTEL_BROKEN_INITIAL_NCMD },
-	{ USB_DEVICE(0x8087, 0x0a2a), .driver_info = BTUSB_INTEL_COMBINED },
+						     BTUSB_INTEL_BROKEN_INITIAL_NCMD |
+						     BTUSB_INTEL_BROKEN_SHUTDOWN_LED },
+	{ USB_DEVICE(0x8087, 0x0a2a), .driver_info = BTUSB_INTEL_COMBINED |
+						     BTUSB_INTEL_BROKEN_SHUTDOWN_LED },
 	{ USB_DEVICE(0x8087, 0x0a2b), .driver_info = BTUSB_INTEL_COMBINED },
-	{ USB_DEVICE(0x8087, 0x0aa7), .driver_info = BTUSB_INTEL_COMBINED },
+	{ USB_DEVICE(0x8087, 0x0aa7), .driver_info = BTUSB_INTEL_COMBINED |
+						     BTUSB_INTEL_BROKEN_SHUTDOWN_LED },
 	{ USB_DEVICE(0x8087, 0x0aaa), .driver_info = BTUSB_INTEL_COMBINED },
 
 	/* Other Intel Bluetooth devices */
@@ -384,6 +407,8 @@ static const struct usb_device_id blacklist_table[] = {
 	/* Realtek 8852AE Bluetooth devices */
 	{ USB_DEVICE(0x0bda, 0xc852), .driver_info = BTUSB_REALTEK |
 						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x0bda, 0x385a), .driver_info = BTUSB_REALTEK |
+						     BTUSB_WIDEBAND_SPEECH },
 	{ USB_DEVICE(0x0bda, 0x4852), .driver_info = BTUSB_REALTEK |
 						     BTUSB_WIDEBAND_SPEECH },
 	{ USB_DEVICE(0x04c5, 0x165c), .driver_info = BTUSB_REALTEK |
@@ -423,6 +448,14 @@ static const struct usb_device_id blacklist_table[] = {
 						     BTUSB_WIDEBAND_SPEECH |
 						     BTUSB_VALID_LE_STATES },
 
+	/* MediaTek MT7922A Bluetooth devices */
+	{ USB_DEVICE(0x0489, 0xe0d8), .driver_info = BTUSB_MEDIATEK |
+						     BTUSB_WIDEBAND_SPEECH |
+						     BTUSB_VALID_LE_STATES },
+	{ USB_DEVICE(0x0489, 0xe0d9), .driver_info = BTUSB_MEDIATEK |
+						     BTUSB_WIDEBAND_SPEECH |
+						     BTUSB_VALID_LE_STATES },
+
 	/* Additional Realtek 8723AE Bluetooth devices */
 	{ USB_DEVICE(0x0930, 0x021d), .driver_info = BTUSB_REALTEK },
 	{ USB_DEVICE(0x13d3, 0x3394), .driver_info = BTUSB_REALTEK },
@@ -549,8 +582,13 @@ struct btusb_data {
 
 	unsigned long flags;
 
-	struct work_struct work;
-	struct work_struct waker;
+	bool poll_sync;
+	int intr_interval;
+	struct work_struct  work;
+	struct work_struct  waker;
+	struct delayed_work rx_work;
+
+	struct sk_buff_head acl_q;
 
 	struct usb_anchor deferred;
 	struct usb_anchor tx_anchor;
@@ -715,6 +753,16 @@ static inline void btusb_free_frags(struct btusb_data *data)
 	spin_unlock_irqrestore(&data->rxlock, flags);
 }
 
+static int btusb_recv_event(struct btusb_data *data, struct sk_buff *skb)
+{
+	if (data->intr_interval) {
+		/* Trigger dequeue immediatelly if an event is received */
+		schedule_delayed_work(&data->rx_work, 0);
+	}
+
+	return data->recv_event(data->hdev, skb);
+}
+
 static int btusb_recv_intr(struct btusb_data *data, void *buffer, int count)
 {
 	struct sk_buff *skb;
@@ -760,7 +808,7 @@ static int btusb_recv_intr(struct btusb_data *data, void *buffer, int count)
 
 		if (!hci_skb_expect(skb)) {
 			/* Complete frame */
-			data->recv_event(data->hdev, skb);
+			btusb_recv_event(data, skb);
 			skb = NULL;
 		}
 	}
@@ -771,6 +819,20 @@ static int btusb_recv_intr(struct btusb_data *data, void *buffer, int count)
 	return err;
 }
 
+static int btusb_recv_acl(struct btusb_data *data, struct sk_buff *skb)
+{
+	/* Only queue ACL packet if intr_interval is set as it means
+	 * force_poll_sync has been enabled.
+	 */
+	if (!data->intr_interval)
+		return data->recv_acl(data->hdev, skb);
+
+	skb_queue_tail(&data->acl_q, skb);
+	schedule_delayed_work(&data->rx_work, data->intr_interval);
+
+	return 0;
+}
+
 static int btusb_recv_bulk(struct btusb_data *data, void *buffer, int count)
 {
 	struct sk_buff *skb;
@@ -818,7 +880,7 @@ static int btusb_recv_bulk(struct btusb_data *data, void *buffer, int count)
 
 		if (!hci_skb_expect(skb)) {
 			/* Complete frame */
-			data->recv_acl(data->hdev, skb);
+			btusb_recv_acl(data, skb);
 			skb = NULL;
 		}
 	}
@@ -924,6 +986,8 @@ static void btusb_intr_complete(struct urb *urb)
 		if (err != -EPERM && err != -ENODEV)
 			bt_dev_err(hdev, "urb %p failed to resubmit (%d)",
 				   urb, -err);
+		if (err != -EPERM)
+			hci_cmd_sync_cancel(hdev, -err);
 		usb_unanchor_urb(urb);
 	}
 }
@@ -967,9 +1031,33 @@ static int btusb_submit_intr_urb(struct hci_dev *hdev, gfp_t mem_flags)
 		if (err != -EPERM && err != -ENODEV)
 			bt_dev_err(hdev, "urb %p submission failed (%d)",
 				   urb, -err);
+		if (err != -EPERM)
+			hci_cmd_sync_cancel(hdev, -err);
 		usb_unanchor_urb(urb);
 	}
 
+	/* Only initialize intr_interval if URB poll sync is enabled */
+	if (!data->poll_sync)
+		goto done;
+
+	/* The units are frames (milliseconds) for full and low speed devices,
+	 * and microframes (1/8 millisecond) for highspeed and SuperSpeed
+	 * devices.
+	 *
+	 * This is done once on open/resume so it shouldn't change even if
+	 * force_poll_sync changes.
+	 */
+	switch (urb->dev->speed) {
+	case USB_SPEED_SUPER_PLUS:
+	case USB_SPEED_SUPER:	/* units are 125us */
+		data->intr_interval = usecs_to_jiffies(urb->interval * 125);
+		break;
+	default:
+		data->intr_interval = msecs_to_jiffies(urb->interval);
+		break;
+	}
+
+done:
 	usb_free_urb(urb);
 
 	return err;
@@ -1322,10 +1410,13 @@ static void btusb_tx_complete(struct urb *urb)
 	if (!test_bit(HCI_RUNNING, &hdev->flags))
 		goto done;
 
-	if (!urb->status)
+	if (!urb->status) {
 		hdev->stat.byte_tx += urb->transfer_buffer_length;
-	else
+	} else {
+		if (hci_skb_pkt_type(skb) == HCI_COMMAND_PKT)
+			hci_cmd_sync_cancel(hdev, -urb->status);
 		hdev->stat.err_tx++;
+	}
 
 done:
 	spin_lock_irqsave(&data->txlock, flags);
@@ -1429,9 +1520,12 @@ static int btusb_close(struct hci_dev *hdev)
 
 	BT_DBG("%s", hdev->name);
 
+	cancel_delayed_work(&data->rx_work);
 	cancel_work_sync(&data->work);
 	cancel_work_sync(&data->waker);
 
+	skb_queue_purge(&data->acl_q);
+
 	clear_bit(BTUSB_ISOC_RUNNING, &data->flags);
 	clear_bit(BTUSB_BULK_RUNNING, &data->flags);
 	clear_bit(BTUSB_INTR_RUNNING, &data->flags);
@@ -1463,6 +1557,10 @@ static int btusb_flush(struct hci_dev *hdev)
 
 	BT_DBG("%s", hdev->name);
 
+	cancel_delayed_work(&data->rx_work);
+
+	skb_queue_purge(&data->acl_q);
+
 	usb_kill_anchored_urbs(&data->tx_anchor);
 	btusb_free_frags(data);
 
@@ -1826,6 +1924,17 @@ static void btusb_waker(struct work_struct *work)
 	usb_autopm_put_interface(data->intf);
 }
 
+static void btusb_rx_work(struct work_struct *work)
+{
+	struct btusb_data *data = container_of(work, struct btusb_data,
+					       rx_work.work);
+	struct sk_buff *skb;
+
+	/* Dequeue ACL data received during the interval */
+	while ((skb = skb_dequeue(&data->acl_q)))
+		data->recv_acl(data->hdev, skb);
+}
+
 static int btusb_setup_bcm92035(struct hci_dev *hdev)
 {
 	struct sk_buff *skb;
@@ -2131,122 +2240,6 @@ static int btusb_send_frame_intel(struct hci_dev *hdev, struct sk_buff *skb)
 #define MTK_BT_RST_DONE		0x00000100
 #define MTK_BT_RESET_WAIT_MS	100
 #define MTK_BT_RESET_NUM_TRIES	10
-#define FIRMWARE_MT7663		"mediatek/mt7663pr2h.bin"
-#define FIRMWARE_MT7668		"mediatek/mt7668pr2h.bin"
-
-#define HCI_WMT_MAX_EVENT_SIZE		64
-/* It is for mt79xx download rom patch*/
-#define MTK_FW_ROM_PATCH_HEADER_SIZE	32
-#define MTK_FW_ROM_PATCH_GD_SIZE	64
-#define MTK_FW_ROM_PATCH_SEC_MAP_SIZE	64
-#define MTK_SEC_MAP_COMMON_SIZE	12
-#define MTK_SEC_MAP_NEED_SEND_SIZE	52
-
-enum {
-	BTMTK_WMT_PATCH_DWNLD = 0x1,
-	BTMTK_WMT_FUNC_CTRL = 0x6,
-	BTMTK_WMT_RST = 0x7,
-	BTMTK_WMT_SEMAPHORE = 0x17,
-};
-
-enum {
-	BTMTK_WMT_INVALID,
-	BTMTK_WMT_PATCH_UNDONE,
-	BTMTK_WMT_PATCH_PROGRESS,
-	BTMTK_WMT_PATCH_DONE,
-	BTMTK_WMT_ON_UNDONE,
-	BTMTK_WMT_ON_DONE,
-	BTMTK_WMT_ON_PROGRESS,
-};
-
-struct btmtk_wmt_hdr {
-	u8	dir;
-	u8	op;
-	__le16	dlen;
-	u8	flag;
-} __packed;
-
-struct btmtk_hci_wmt_cmd {
-	struct btmtk_wmt_hdr hdr;
-	u8 data[];
-} __packed;
-
-struct btmtk_hci_wmt_evt {
-	struct hci_event_hdr hhdr;
-	struct btmtk_wmt_hdr whdr;
-} __packed;
-
-struct btmtk_hci_wmt_evt_funcc {
-	struct btmtk_hci_wmt_evt hwhdr;
-	__be16 status;
-} __packed;
-
-struct btmtk_tci_sleep {
-	u8 mode;
-	__le16 duration;
-	__le16 host_duration;
-	u8 host_wakeup_pin;
-	u8 time_compensation;
-} __packed;
-
-struct btmtk_hci_wmt_params {
-	u8 op;
-	u8 flag;
-	u16 dlen;
-	const void *data;
-	u32 *status;
-};
-
-struct btmtk_patch_header {
-	u8 datetime[16];
-	u8 platform[4];
-	__le16 hwver;
-	__le16 swver;
-	__le32 magicnum;
-} __packed;
-
-struct btmtk_global_desc {
-	__le32 patch_ver;
-	__le32 sub_sys;
-	__le32 feature_opt;
-	__le32 section_num;
-} __packed;
-
-struct btmtk_section_map {
-	__le32 sectype;
-	__le32 secoffset;
-	__le32 secsize;
-	union {
-		__le32 u4SecSpec[13];
-		struct {
-			__le32 dlAddr;
-			__le32 dlsize;
-			__le32 seckeyidx;
-			__le32 alignlen;
-			__le32 sectype;
-			__le32 dlmodecrctype;
-			__le32 crc;
-			__le32 reserved[6];
-		} bin_info_spec;
-	};
-} __packed;
-
-static int btusb_set_bdaddr_mtk(struct hci_dev *hdev, const bdaddr_t *bdaddr)
-{
-	struct sk_buff *skb;
-	long ret;
-
-	skb = __hci_cmd_sync(hdev, 0xfc1a, sizeof(bdaddr), bdaddr, HCI_INIT_TIMEOUT);
-	if (IS_ERR(skb)) {
-		ret = PTR_ERR(skb);
-		bt_dev_err(hdev, "changing Mediatek device address failed (%ld)",
-			   ret);
-		return ret;
-	}
-	kfree_skb(skb);
-
-	return 0;
-}
 
 static void btusb_mtk_wmt_recv(struct urb *urb)
 {
@@ -2265,6 +2258,7 @@ static void btusb_mtk_wmt_recv(struct urb *urb)
 		skb = bt_skb_alloc(HCI_WMT_MAX_EVENT_SIZE, GFP_ATOMIC);
 		if (!skb) {
 			hdev->stat.err_rx++;
+			kfree(urb->setup_packet);
 			return;
 		}
 
@@ -2285,6 +2279,7 @@ static void btusb_mtk_wmt_recv(struct urb *urb)
 			data->evt_skb = skb_clone(skb, GFP_ATOMIC);
 			if (!data->evt_skb) {
 				kfree_skb(skb);
+				kfree(urb->setup_packet);
 				return;
 			}
 		}
@@ -2293,6 +2288,7 @@ static void btusb_mtk_wmt_recv(struct urb *urb)
 		if (err < 0) {
 			kfree_skb(data->evt_skb);
 			data->evt_skb = NULL;
+			kfree(urb->setup_packet);
 			return;
 		}
 
@@ -2303,6 +2299,7 @@ static void btusb_mtk_wmt_recv(struct urb *urb)
 			wake_up_bit(&data->flags,
 				    BTUSB_TX_WAIT_VND_EVT);
 		}
+		kfree(urb->setup_packet);
 		return;
 	} else if (urb->status == -ENOENT) {
 		/* Avoid suspend failed when usb_kill_urb */
@@ -2323,6 +2320,7 @@ static void btusb_mtk_wmt_recv(struct urb *urb)
 	usb_anchor_urb(urb, &data->ctrl_anchor);
 	err = usb_submit_urb(urb, GFP_ATOMIC);
 	if (err < 0) {
+		kfree(urb->setup_packet);
 		/* -EPERM: urb is being killed;
 		 * -ENODEV: device got disconnected
 		 */
@@ -2497,209 +2495,6 @@ err_free_wc:
 	return err;
 }
 
-static int btusb_mtk_setup_firmware_79xx(struct hci_dev *hdev, const char *fwname)
-{
-	struct btmtk_hci_wmt_params wmt_params;
-	struct btmtk_global_desc *globaldesc = NULL;
-	struct btmtk_section_map *sectionmap;
-	const struct firmware *fw;
-	const u8 *fw_ptr;
-	const u8 *fw_bin_ptr;
-	int err, dlen, i, status;
-	u8 flag, first_block, retry;
-	u32 section_num, dl_size, section_offset;
-	u8 cmd[64];
-
-	err = request_firmware(&fw, fwname, &hdev->dev);
-	if (err < 0) {
-		bt_dev_err(hdev, "Failed to load firmware file (%d)", err);
-		return err;
-	}
-
-	fw_ptr = fw->data;
-	fw_bin_ptr = fw_ptr;
-	globaldesc = (struct btmtk_global_desc *)(fw_ptr + MTK_FW_ROM_PATCH_HEADER_SIZE);
-	section_num = le32_to_cpu(globaldesc->section_num);
-
-	for (i = 0; i < section_num; i++) {
-		first_block = 1;
-		fw_ptr = fw_bin_ptr;
-		sectionmap = (struct btmtk_section_map *)(fw_ptr + MTK_FW_ROM_PATCH_HEADER_SIZE +
-			      MTK_FW_ROM_PATCH_GD_SIZE + MTK_FW_ROM_PATCH_SEC_MAP_SIZE * i);
-
-		section_offset = le32_to_cpu(sectionmap->secoffset);
-		dl_size = le32_to_cpu(sectionmap->bin_info_spec.dlsize);
-
-		if (dl_size > 0) {
-			retry = 20;
-			while (retry > 0) {
-				cmd[0] = 0; /* 0 means legacy dl mode. */
-				memcpy(cmd + 1,
-				       fw_ptr + MTK_FW_ROM_PATCH_HEADER_SIZE +
-				       MTK_FW_ROM_PATCH_GD_SIZE + MTK_FW_ROM_PATCH_SEC_MAP_SIZE * i +
-				       MTK_SEC_MAP_COMMON_SIZE,
-				       MTK_SEC_MAP_NEED_SEND_SIZE + 1);
-
-				wmt_params.op = BTMTK_WMT_PATCH_DWNLD;
-				wmt_params.status = &status;
-				wmt_params.flag = 0;
-				wmt_params.dlen = MTK_SEC_MAP_NEED_SEND_SIZE + 1;
-				wmt_params.data = &cmd;
-
-				err = btusb_mtk_hci_wmt_sync(hdev, &wmt_params);
-				if (err < 0) {
-					bt_dev_err(hdev, "Failed to send wmt patch dwnld (%d)",
-						   err);
-					goto err_release_fw;
-				}
-
-				if (status == BTMTK_WMT_PATCH_UNDONE) {
-					break;
-				} else if (status == BTMTK_WMT_PATCH_PROGRESS) {
-					msleep(100);
-					retry--;
-				} else if (status == BTMTK_WMT_PATCH_DONE) {
-					goto next_section;
-				} else {
-					bt_dev_err(hdev, "Failed wmt patch dwnld status (%d)",
-						   status);
-					goto err_release_fw;
-				}
-			}
-
-			fw_ptr += section_offset;
-			wmt_params.op = BTMTK_WMT_PATCH_DWNLD;
-			wmt_params.status = NULL;
-
-			while (dl_size > 0) {
-				dlen = min_t(int, 250, dl_size);
-				if (first_block == 1) {
-					flag = 1;
-					first_block = 0;
-				} else if (dl_size - dlen <= 0) {
-					flag = 3;
-				} else {
-					flag = 2;
-				}
-
-				wmt_params.flag = flag;
-				wmt_params.dlen = dlen;
-				wmt_params.data = fw_ptr;
-
-				err = btusb_mtk_hci_wmt_sync(hdev, &wmt_params);
-				if (err < 0) {
-					bt_dev_err(hdev, "Failed to send wmt patch dwnld (%d)",
-						   err);
-					goto err_release_fw;
-				}
-
-				dl_size -= dlen;
-				fw_ptr += dlen;
-			}
-		}
-next_section:
-		continue;
-	}
-	/* Wait a few moments for firmware activation done */
-	usleep_range(100000, 120000);
-
-err_release_fw:
-	release_firmware(fw);
-
-	return err;
-}
-
-static int btusb_mtk_setup_firmware(struct hci_dev *hdev, const char *fwname)
-{
-	struct btmtk_hci_wmt_params wmt_params;
-	const struct firmware *fw;
-	const u8 *fw_ptr;
-	size_t fw_size;
-	int err, dlen;
-	u8 flag, param;
-
-	err = request_firmware(&fw, fwname, &hdev->dev);
-	if (err < 0) {
-		bt_dev_err(hdev, "Failed to load firmware file (%d)", err);
-		return err;
-	}
-
-	/* Power on data RAM the firmware relies on. */
-	param = 1;
-	wmt_params.op = BTMTK_WMT_FUNC_CTRL;
-	wmt_params.flag = 3;
-	wmt_params.dlen = sizeof(param);
-	wmt_params.data = &param;
-	wmt_params.status = NULL;
-
-	err = btusb_mtk_hci_wmt_sync(hdev, &wmt_params);
-	if (err < 0) {
-		bt_dev_err(hdev, "Failed to power on data RAM (%d)", err);
-		goto err_release_fw;
-	}
-
-	fw_ptr = fw->data;
-	fw_size = fw->size;
-
-	/* The size of patch header is 30 bytes, should be skip */
-	if (fw_size < 30) {
-		err = -EINVAL;
-		goto err_release_fw;
-	}
-
-	fw_size -= 30;
-	fw_ptr += 30;
-	flag = 1;
-
-	wmt_params.op = BTMTK_WMT_PATCH_DWNLD;
-	wmt_params.status = NULL;
-
-	while (fw_size > 0) {
-		dlen = min_t(int, 250, fw_size);
-
-		/* Tell device the position in sequence */
-		if (fw_size - dlen <= 0)
-			flag = 3;
-		else if (fw_size < fw->size - 30)
-			flag = 2;
-
-		wmt_params.flag = flag;
-		wmt_params.dlen = dlen;
-		wmt_params.data = fw_ptr;
-
-		err = btusb_mtk_hci_wmt_sync(hdev, &wmt_params);
-		if (err < 0) {
-			bt_dev_err(hdev, "Failed to send wmt patch dwnld (%d)",
-				   err);
-			goto err_release_fw;
-		}
-
-		fw_size -= dlen;
-		fw_ptr += dlen;
-	}
-
-	wmt_params.op = BTMTK_WMT_RST;
-	wmt_params.flag = 4;
-	wmt_params.dlen = 0;
-	wmt_params.data = NULL;
-	wmt_params.status = NULL;
-
-	/* Activate funciton the firmware providing to */
-	err = btusb_mtk_hci_wmt_sync(hdev, &wmt_params);
-	if (err < 0) {
-		bt_dev_err(hdev, "Failed to send wmt rst (%d)", err);
-		goto err_release_fw;
-	}
-
-	/* Wait a few moments for firmware activation done */
-	usleep_range(10000, 12000);
-
-err_release_fw:
-	release_firmware(fw);
-
-	return err;
-}
-
 static int btusb_mtk_func_query(struct hci_dev *hdev)
 {
 	struct btmtk_hci_wmt_params wmt_params;
@@ -2857,7 +2652,12 @@ static int btusb_mtk_setup(struct hci_dev *hdev)
 		snprintf(fw_bin_name, sizeof(fw_bin_name),
 			"mediatek/BT_RAM_CODE_MT%04x_1_%x_hdr.bin",
 			 dev_id & 0xffff, (fw_version & 0xff) + 1);
-		err = btusb_mtk_setup_firmware_79xx(hdev, fw_bin_name);
+		err = btmtk_setup_firmware_79xx(hdev, fw_bin_name,
+						btusb_mtk_hci_wmt_sync);
+		if (err < 0) {
+			bt_dev_err(hdev, "Failed to set up firmware (%d)", err);
+			return err;
+		}
 
 		/* It's Device EndPoint Reset Option Register */
 		btusb_mtk_uhw_reg_write(data, MTK_EP_RST_OPT, MTK_EP_RST_IN_OUT_OPT);
@@ -2877,6 +2677,7 @@ static int btusb_mtk_setup(struct hci_dev *hdev)
 		}
 
 		hci_set_msft_opcode(hdev, 0xFD30);
+		hci_set_aosp_capable(hdev);
 		goto done;
 	default:
 		bt_dev_err(hdev, "Unsupported hardware variant (%08x)",
@@ -2903,7 +2704,8 @@ static int btusb_mtk_setup(struct hci_dev *hdev)
 	}
 
 	/* Setup a firmware which the device definitely requires */
-	err = btusb_mtk_setup_firmware(hdev, fwname);
+	err = btmtk_setup_firmware(hdev, fwname,
+				   btusb_mtk_hci_wmt_sync);
 	if (err < 0)
 		return err;
 
@@ -3064,9 +2866,6 @@ static int btusb_recv_acl_mtk(struct hci_dev *hdev, struct sk_buff *skb)
 	return hci_recv_frame(hdev, skb);
 }
 
-MODULE_FIRMWARE(FIRMWARE_MT7663);
-MODULE_FIRMWARE(FIRMWARE_MT7668);
-
 #ifdef CONFIG_PM
 /* Configure an out-of-band gpio as wake-up pin, if specified in device tree */
 static int marvell_config_oob_wake(struct hci_dev *hdev)
@@ -3190,11 +2989,15 @@ static int btusb_set_bdaddr_wcn6855(struct hci_dev *hdev,
 #define QCA_DFU_TIMEOUT		3000
 #define QCA_FLAG_MULTI_NVM      0x80
 
+#define WCN6855_2_0_RAM_VERSION_GF 0x400c1200
+#define WCN6855_2_1_RAM_VERSION_GF 0x400c1211
+
 struct qca_version {
 	__le32	rom_version;
 	__le32	patch_version;
 	__le32	ram_version;
-	__le16	board_id;
+	__u8	chip_id;
+	__u8	platform_id;
 	__le16	flag;
 	__u8	reserved[4];
 } __packed;
@@ -3221,6 +3024,7 @@ static const struct qca_device_info qca_devices_table[] = {
 	{ 0x00000302, 28, 4, 16 }, /* Rome 3.2 */
 	{ 0x00130100, 40, 4, 16 }, /* WCN6855 1.0 */
 	{ 0x00130200, 40, 4, 16 }, /* WCN6855 2.0 */
+	{ 0x00130201, 40, 4, 16 }, /* WCN6855 2.1 */
 };
 
 static int btusb_qca_send_vendor_req(struct usb_device *udev, u8 request,
@@ -3375,6 +3179,50 @@ done:
 	return err;
 }
 
+static void btusb_generate_qca_nvm_name(char *fwname, size_t max_size,
+					const struct qca_version *ver)
+{
+	u32 rom_version = le32_to_cpu(ver->rom_version);
+	u16 flag = le16_to_cpu(ver->flag);
+
+	if (((flag >> 8) & 0xff) == QCA_FLAG_MULTI_NVM) {
+		/* The board_id should be split into two bytes
+		 * The 1st byte is chip ID, and the 2nd byte is platform ID
+		 * For example, board ID 0x010A, 0x01 is platform ID. 0x0A is chip ID
+		 * we have several platforms, and platform IDs are continuously added
+		 * Platform ID:
+		 * 0x00 is for Mobile
+		 * 0x01 is for X86
+		 * 0x02 is for Automotive
+		 * 0x03 is for Consumer electronic
+		 */
+		u16 board_id = (ver->chip_id << 8) + ver->platform_id;
+		const char *variant;
+
+		switch (le32_to_cpu(ver->ram_version)) {
+		case WCN6855_2_0_RAM_VERSION_GF:
+		case WCN6855_2_1_RAM_VERSION_GF:
+			variant = "_gf";
+			break;
+		default:
+			variant = "";
+			break;
+		}
+
+		if (board_id == 0) {
+			snprintf(fwname, max_size, "qca/nvm_usb_%08x%s.bin",
+				rom_version, variant);
+		} else {
+			snprintf(fwname, max_size, "qca/nvm_usb_%08x%s_%04x.bin",
+				rom_version, variant, board_id);
+		}
+	} else {
+		snprintf(fwname, max_size, "qca/nvm_usb_%08x.bin",
+			rom_version);
+	}
+
+}
+
 static int btusb_setup_qca_load_nvm(struct hci_dev *hdev,
 				    struct qca_version *ver,
 				    const struct qca_device_info *info)
@@ -3383,20 +3231,7 @@ static int btusb_setup_qca_load_nvm(struct hci_dev *hdev,
 	char fwname[64];
 	int err;
 
-	if (((ver->flag >> 8) & 0xff) == QCA_FLAG_MULTI_NVM) {
-		/* if boardid equal 0, use default nvm without surfix */
-		if (le16_to_cpu(ver->board_id) == 0x0) {
-			snprintf(fwname, sizeof(fwname), "qca/nvm_usb_%08x.bin",
-				 le32_to_cpu(ver->rom_version));
-		} else {
-			snprintf(fwname, sizeof(fwname), "qca/nvm_usb_%08x_%04x.bin",
-				le32_to_cpu(ver->rom_version),
-				le16_to_cpu(ver->board_id));
-		}
-	} else {
-		snprintf(fwname, sizeof(fwname), "qca/nvm_usb_%08x.bin",
-			 le32_to_cpu(ver->rom_version));
-	}
+	btusb_generate_qca_nvm_name(fwname, sizeof(fwname), ver);
 
 	err = request_firmware(&fw, fwname, &hdev->dev);
 	if (err) {
@@ -3661,6 +3496,49 @@ static int btusb_shutdown_qca(struct hci_dev *hdev)
 	return 0;
 }
 
+static ssize_t force_poll_sync_read(struct file *file, char __user *user_buf,
+				    size_t count, loff_t *ppos)
+{
+	struct btusb_data *data = file->private_data;
+	char buf[3];
+
+	buf[0] = data->poll_sync ? 'Y' : 'N';
+	buf[1] = '\n';
+	buf[2] = '\0';
+	return simple_read_from_buffer(user_buf, count, ppos, buf, 2);
+}
+
+static ssize_t force_poll_sync_write(struct file *file,
+				     const char __user *user_buf,
+				     size_t count, loff_t *ppos)
+{
+	struct btusb_data *data = file->private_data;
+	bool enable;
+	int err;
+
+	err = kstrtobool_from_user(user_buf, count, &enable);
+	if (err)
+		return err;
+
+	/* Only allow changes while the adapter is down */
+	if (test_bit(HCI_UP, &data->hdev->flags))
+		return -EPERM;
+
+	if (data->poll_sync == enable)
+		return -EALREADY;
+
+	data->poll_sync = enable;
+
+	return count;
+}
+
+static const struct file_operations force_poll_sync_fops = {
+	.open		= simple_open,
+	.read		= force_poll_sync_read,
+	.write		= force_poll_sync_write,
+	.llseek		= default_llseek,
+};
+
 static int btusb_probe(struct usb_interface *intf,
 		       const struct usb_device_id *id)
 {
@@ -3744,6 +3622,10 @@ static int btusb_probe(struct usb_interface *intf,
 
 	INIT_WORK(&data->work, btusb_work);
 	INIT_WORK(&data->waker, btusb_waker);
+	INIT_DELAYED_WORK(&data->rx_work, btusb_rx_work);
+
+	skb_queue_head_init(&data->acl_q);
+
 	init_usb_anchor(&data->deferred);
 	init_usb_anchor(&data->tx_anchor);
 	spin_lock_init(&data->txlock);
@@ -3857,6 +3739,9 @@ static int btusb_probe(struct usb_interface *intf,
 
 		if (id->driver_info & BTUSB_INTEL_BROKEN_INITIAL_NCMD)
 			btintel_set_flag(hdev, INTEL_BROKEN_INITIAL_NCMD);
+
+		if (id->driver_info & BTUSB_INTEL_BROKEN_SHUTDOWN_LED)
+			btintel_set_flag(hdev, INTEL_BROKEN_SHUTDOWN_LED);
 	}
 
 	if (id->driver_info & BTUSB_MARVELL)
@@ -3868,7 +3753,7 @@ static int btusb_probe(struct usb_interface *intf,
 		hdev->shutdown = btusb_mtk_shutdown;
 		hdev->manufacturer = 70;
 		hdev->cmd_timeout = btusb_mtk_cmd_timeout;
-		hdev->set_bdaddr = btusb_set_bdaddr_mtk;
+		hdev->set_bdaddr = btmtk_set_bdaddr;
 		set_bit(HCI_QUIRK_NON_PERSISTENT_SETUP, &hdev->quirks);
 		data->recv_acl = btusb_recv_acl_mtk;
 	}
@@ -4009,6 +3894,9 @@ static int btusb_probe(struct usb_interface *intf,
 
 	usb_set_intfdata(intf, data);
 
+	debugfs_create_file("force_poll_sync", 0644, hdev->debugfs, data,
+			    &force_poll_sync_fops);
+
 	return 0;
 
 out_free_dev: