Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:
 "Highlights:

   1) Support TX_RING in AF_PACKET TPACKET_V3 mode, from Sowmini
      Varadhan.

   2) Simplify classifier state on sk_buff in order to shrink it a bit.
      From Willem de Bruijn.

   3) Introduce SIPHASH and it's usage for secure sequence numbers and
      syncookies. From Jason A. Donenfeld.

   4) Reduce CPU usage for ICMP replies we are going to limit or
      suppress, from Jesper Dangaard Brouer.

   5) Introduce Shared Memory Communications socket layer, from Ursula
      Braun.

   6) Add RACK loss detection and allow it to actually trigger fast
      recovery instead of just assisting after other algorithms have
      triggered it. From Yuchung Cheng.

   7) Add xmit_more and BQL support to mvneta driver, from Simon Guinot.

   8) skb_cow_data avoidance in esp4 and esp6, from Steffen Klassert.

   9) Export MPLS packet stats via netlink, from Robert Shearman.

  10) Significantly improve inet port bind conflict handling, especially
      when an application is restarted and changes it's setting of
      reuseport. From Josef Bacik.

  11) Implement TX batching in vhost_net, from Jason Wang.

  12) Extend the dummy device so that VF (virtual function) features,
      such as configuration, can be more easily tested. From Phil
      Sutter.

  13) Avoid two atomic ops per page on x86 in bnx2x driver, from Eric
      Dumazet.

  14) Add new bpf MAP, implementing a longest prefix match trie. From
      Daniel Mack.

  15) Packet sample offloading support in mlxsw driver, from Yotam Gigi.

  16) Add new aquantia driver, from David VomLehn.

  17) Add bpf tracepoints, from Daniel Borkmann.

  18) Add support for port mirroring to b53 and bcm_sf2 drivers, from
      Florian Fainelli.

  19) Remove custom busy polling in many drivers, it is done in the core
      networking since 4.5 times. From Eric Dumazet.

  20) Support XDP adjust_head in virtio_net, from John Fastabend.

  21) Fix several major holes in neighbour entry confirmation, from
      Julian Anastasov.

  22) Add XDP support to bnxt_en driver, from Michael Chan.

  23) VXLAN offloads for enic driver, from Govindarajulu Varadarajan.

  24) Add IPVTAP driver (IP-VLAN based tap driver) from Sainath Grandhi.

  25) Support GRO in IPSEC protocols, from Steffen Klassert"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1764 commits)
  Revert "ath10k: Search SMBIOS for OEM board file extension"
  net: socket: fix recvmmsg not returning error from sock_error
  bnxt_en: use eth_hw_addr_random()
  bpf: fix unlocking of jited image when module ronx not set
  arch: add ARCH_HAS_SET_MEMORY config
  net: napi_watchdog() can use napi_schedule_irqoff()
  tcp: Revert "tcp: tcp_probe: use spin_lock_bh()"
  net/hsr: use eth_hw_addr_random()
  net: mvpp2: enable building on 64-bit platforms
  net: mvpp2: switch to build_skb() in the RX path
  net: mvpp2: simplify MVPP2_PRS_RI_* definitions
  net: mvpp2: fix indentation of MVPP2_EXT_GLOBAL_CTRL_DEFAULT
  net: mvpp2: remove unused register definitions
  net: mvpp2: simplify mvpp2_bm_bufs_add()
  net: mvpp2: drop useless fields in mvpp2_bm_pool and related code
  net: mvpp2: remove unused 'tx_skb' field of 'struct mvpp2_tx_queue'
  net: mvpp2: release reference to txq_cpu[] entry after unmapping
  net: mvpp2: handle too large value in mvpp2_rx_time_coal_set()
  net: mvpp2: handle too large value handling in mvpp2_rx_pkts_coal_set()
  net: mvpp2: remove useless arguments in mvpp2_rx_{pkts, time}_coal_set
  ...

9 files changed, 217 insertions, 43 deletions

diff --git a/drivers/bluetooth/Kconfig b/drivers/bluetooth/Kconfig
index 3cc9bff9d99d..c2c14a12713b 100644
--- a/drivers/bluetooth/Kconfig
+++ b/drivers/bluetooth/Kconfig
@@ -344,7 +344,7 @@ config BT_WILINK
 
 config BT_QCOMSMD
 	tristate "Qualcomm SMD based HCI support"
-	depends on QCOM_SMD && QCOM_WCNSS_CTRL
+	depends on (QCOM_SMD && QCOM_WCNSS_CTRL) || COMPILE_TEST
 	select BT_QCA
 	help
 	  Qualcomm SMD based HCI driver.
diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c
index fadba88745dc..b793853ff05f 100644
--- a/drivers/bluetooth/ath3k.c
+++ b/drivers/bluetooth/ath3k.c
@@ -94,6 +94,7 @@ static const struct usb_device_id ath3k_table[] = {
 	{ USB_DEVICE(0x04CA, 0x300f) },
 	{ USB_DEVICE(0x04CA, 0x3010) },
 	{ USB_DEVICE(0x04CA, 0x3014) },
+	{ USB_DEVICE(0x04CA, 0x3018) },
 	{ USB_DEVICE(0x0930, 0x0219) },
 	{ USB_DEVICE(0x0930, 0x021c) },
 	{ USB_DEVICE(0x0930, 0x0220) },
@@ -162,6 +163,7 @@ static const struct usb_device_id ath3k_blist_tbl[] = {
 	{ USB_DEVICE(0x04ca, 0x300f), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x04ca, 0x3010), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x04ca, 0x3014), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x04ca, 0x3018), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0930, 0x021c), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0930, 0x0220), .driver_info = BTUSB_ATH3012 },
diff --git a/drivers/bluetooth/btbcm.c b/drivers/bluetooth/btbcm.c
index fdb44829ab6f..ba3dd2eafc09 100644
--- a/drivers/bluetooth/btbcm.c
+++ b/drivers/bluetooth/btbcm.c
@@ -178,6 +178,9 @@ static int btbcm_reset(struct hci_dev *hdev)
 	}
 	kfree_skb(skb);
 
+	/* 100 msec delay for module to complete reset process */
+	msleep(100);
+
 	return 0;
 }
 
diff --git a/drivers/bluetooth/btmrvl_main.c b/drivers/bluetooth/btmrvl_main.c
index e6a85f0e6309..c38cb5b91291 100644
--- a/drivers/bluetooth/btmrvl_main.c
+++ b/drivers/bluetooth/btmrvl_main.c
@@ -502,7 +502,7 @@ static int btmrvl_download_cal_data(struct btmrvl_private *priv,
 	ret = btmrvl_send_sync_cmd(priv, BT_CMD_LOAD_CONFIG_DATA, data,
 				   BT_CAL_HDR_LEN + len);
 	if (ret)
-		BT_ERR("Failed to download caibration data");
+		BT_ERR("Failed to download calibration data");
 
 	return 0;
 }
diff --git a/drivers/bluetooth/btmrvl_sdio.c b/drivers/bluetooth/btmrvl_sdio.c
index d02f2c14df32..08e01f002bad 100644
--- a/drivers/bluetooth/btmrvl_sdio.c
+++ b/drivers/bluetooth/btmrvl_sdio.c
@@ -97,11 +97,11 @@ static int btmrvl_sdio_probe_of(struct device *dev,
 		cfg->irq_bt = irq_of_parse_and_map(card->plt_of_node, 0);
 		if (!cfg->irq_bt) {
 			dev_err(dev, "fail to parse irq_bt from device tree");
+			cfg->irq_bt = -1;
 		} else {
 			ret = devm_request_irq(dev, cfg->irq_bt,
 					       btmrvl_wake_irq_bt,
-					       IRQF_TRIGGER_LOW,
-					       "bt_wake", cfg);
+					       0, "bt_wake", cfg);
 			if (ret) {
 				dev_err(dev,
 					"Failed to request irq_bt %d (%d)\n",
@@ -1624,7 +1624,7 @@ static int btmrvl_sdio_suspend(struct device *dev)
 
 	if (priv->adapter->hs_state != HS_ACTIVATED) {
 		if (btmrvl_enable_hs(priv)) {
-			BT_ERR("HS not actived, suspend failed!");
+			BT_ERR("HS not activated, suspend failed!");
 			priv->adapter->is_suspending = false;
 			return -EBUSY;
 		}
@@ -1682,8 +1682,12 @@ static int btmrvl_sdio_resume(struct device *dev)
 	/* Disable platform specific wakeup interrupt */
 	if (card->plt_wake_cfg && card->plt_wake_cfg->irq_bt >= 0) {
 		disable_irq_wake(card->plt_wake_cfg->irq_bt);
-		if (!card->plt_wake_cfg->wake_by_bt)
-			disable_irq(card->plt_wake_cfg->irq_bt);
+		disable_irq(card->plt_wake_cfg->irq_bt);
+		if (card->plt_wake_cfg->wake_by_bt)
+			/* Undo our disable, since interrupt handler already
+			 * did this.
+			 */
+			enable_irq(card->plt_wake_cfg->irq_bt);
 	}
 
 	return 0;
diff --git a/drivers/bluetooth/btqcomsmd.c b/drivers/bluetooth/btqcomsmd.c
index 08c2c93887c1..8d4868af9bbd 100644
--- a/drivers/bluetooth/btqcomsmd.c
+++ b/drivers/bluetooth/btqcomsmd.c
@@ -165,6 +165,7 @@ static const struct of_device_id btqcomsmd_of_match[] = {
 	{ .compatible = "qcom,wcnss-bt", },
 	{ },
 };
+MODULE_DEVICE_TABLE(of, btqcomsmd_of_match);
 
 static struct platform_driver btqcomsmd_driver = {
 	.probe = btqcomsmd_probe,
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 2f633df9f4e6..1c8094ef3f22 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -24,6 +24,8 @@
 #include <linux/module.h>
 #include <linux/usb.h>
 #include <linux/firmware.h>
+#include <linux/of_device.h>
+#include <linux/of_irq.h>
 #include <asm/unaligned.h>
 
 #include <net/bluetooth/bluetooth.h>
@@ -130,6 +132,10 @@ static const struct usb_device_id btusb_table[] = {
 	/* Broadcom BCM43142A0 (Foxconn/Lenovo) */
 	{ USB_DEVICE(0x105b, 0xe065), .driver_info = BTUSB_BCM_PATCHRAM },
 
+	/* Broadcom BCM920703 (HTC Vive) */
+	{ USB_VENDOR_AND_INTERFACE_INFO(0x0bb4, 0xff, 0x01, 0x01),
+	  .driver_info = BTUSB_BCM_PATCHRAM },
+
 	/* Foxconn - Hon Hai */
 	{ USB_VENDOR_AND_INTERFACE_INFO(0x0489, 0xff, 0x01, 0x01),
 	  .driver_info = BTUSB_BCM_PATCHRAM },
@@ -154,6 +160,10 @@ static const struct usb_device_id btusb_table[] = {
 	{ USB_VENDOR_AND_INTERFACE_INFO(0x13d3, 0xff, 0x01, 0x01),
 	  .driver_info = BTUSB_BCM_PATCHRAM },
 
+	/* Dell Computer - Broadcom based  */
+	{ USB_VENDOR_AND_INTERFACE_INFO(0x413c, 0xff, 0x01, 0x01),
+	  .driver_info = BTUSB_BCM_PATCHRAM },
+
 	/* Toshiba Corp - Broadcom based */
 	{ USB_VENDOR_AND_INTERFACE_INFO(0x0930, 0xff, 0x01, 0x01),
 	  .driver_info = BTUSB_BCM_PATCHRAM },
@@ -209,6 +219,7 @@ static const struct usb_device_id blacklist_table[] = {
 	{ USB_DEVICE(0x04ca, 0x300f), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x04ca, 0x3010), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x04ca, 0x3014), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x04ca, 0x3018), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0930, 0x021c), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0930, 0x0220), .driver_info = BTUSB_ATH3012 },
@@ -369,6 +380,7 @@ static const struct usb_device_id blacklist_table[] = {
 #define BTUSB_BOOTING		9
 #define BTUSB_RESET_RESUME	10
 #define BTUSB_DIAG_RUNNING	11
+#define BTUSB_OOB_WAKE_ENABLED	12
 
 struct btusb_data {
 	struct hci_dev       *hdev;
@@ -416,6 +428,8 @@ struct btusb_data {
 	int (*recv_bulk)(struct btusb_data *data, void *buffer, int count);
 
 	int (*setup_on_usb)(struct hci_dev *hdev);
+
+	int oob_wake_irq;   /* irq for out-of-band wake-on-bt */
 };
 
 static inline void btusb_free_frags(struct btusb_data *data)
@@ -2338,6 +2352,50 @@ static int btusb_shutdown_intel(struct hci_dev *hdev)
 	return 0;
 }
 
+#ifdef CONFIG_PM
+/* Configure an out-of-band gpio as wake-up pin, if specified in device tree */
+static int marvell_config_oob_wake(struct hci_dev *hdev)
+{
+	struct sk_buff *skb;
+	struct btusb_data *data = hci_get_drvdata(hdev);
+	struct device *dev = &data->udev->dev;
+	u16 pin, gap, opcode;
+	int ret;
+	u8 cmd[5];
+
+	/* Move on if no wakeup pin specified */
+	if (of_property_read_u16(dev->of_node, "marvell,wakeup-pin", &pin) ||
+	    of_property_read_u16(dev->of_node, "marvell,wakeup-gap-ms", &gap))
+		return 0;
+
+	/* Vendor specific command to configure a GPIO as wake-up pin */
+	opcode = hci_opcode_pack(0x3F, 0x59);
+	cmd[0] = opcode & 0xFF;
+	cmd[1] = opcode >> 8;
+	cmd[2] = 2; /* length of parameters that follow */
+	cmd[3] = pin;
+	cmd[4] = gap; /* time in ms, for which wakeup pin should be asserted */
+
+	skb = bt_skb_alloc(sizeof(cmd), GFP_KERNEL);
+	if (!skb) {
+		bt_dev_err(hdev, "%s: No memory\n", __func__);
+		return -ENOMEM;
+	}
+
+	memcpy(skb_put(skb, sizeof(cmd)), cmd, sizeof(cmd));
+	hci_skb_pkt_type(skb) = HCI_COMMAND_PKT;
+
+	ret = btusb_send_frame(hdev, skb);
+	if (ret) {
+		bt_dev_err(hdev, "%s: configuration failed\n", __func__);
+		kfree_skb(skb);
+		return ret;
+	}
+
+	return 0;
+}
+#endif
+
 static int btusb_set_bdaddr_marvell(struct hci_dev *hdev,
 				    const bdaddr_t *bdaddr)
 {
@@ -2728,6 +2786,66 @@ static int btusb_bcm_set_diag(struct hci_dev *hdev, bool enable)
 }
 #endif
 
+#ifdef CONFIG_PM
+static irqreturn_t btusb_oob_wake_handler(int irq, void *priv)
+{
+	struct btusb_data *data = priv;
+
+	pm_wakeup_event(&data->udev->dev, 0);
+
+	/* Disable only if not already disabled (keep it balanced) */
+	if (test_and_clear_bit(BTUSB_OOB_WAKE_ENABLED, &data->flags)) {
+		disable_irq_nosync(irq);
+		disable_irq_wake(irq);
+	}
+	return IRQ_HANDLED;
+}
+
+static const struct of_device_id btusb_match_table[] = {
+	{ .compatible = "usb1286,204e" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, btusb_match_table);
+
+/* Use an oob wakeup pin? */
+static int btusb_config_oob_wake(struct hci_dev *hdev)
+{
+	struct btusb_data *data = hci_get_drvdata(hdev);
+	struct device *dev = &data->udev->dev;
+	int irq, ret;
+
+	clear_bit(BTUSB_OOB_WAKE_ENABLED, &data->flags);
+
+	if (!of_match_device(btusb_match_table, dev))
+		return 0;
+
+	/* Move on if no IRQ specified */
+	irq = of_irq_get_byname(dev->of_node, "wakeup");
+	if (irq <= 0) {
+		bt_dev_dbg(hdev, "%s: no OOB Wakeup IRQ in DT", __func__);
+		return 0;
+	}
+
+	ret = devm_request_irq(&hdev->dev, irq, btusb_oob_wake_handler,
+			       0, "OOB Wake-on-BT", data);
+	if (ret) {
+		bt_dev_err(hdev, "%s: IRQ request failed", __func__);
+		return ret;
+	}
+
+	ret = device_init_wakeup(dev, true);
+	if (ret) {
+		bt_dev_err(hdev, "%s: failed to init_wakeup", __func__);
+		return ret;
+	}
+
+	data->oob_wake_irq = irq;
+	disable_irq(irq);
+	bt_dev_info(hdev, "OOB Wake-on-BT configured at IRQ %u", irq);
+	return 0;
+}
+#endif
+
 static int btusb_probe(struct usb_interface *intf,
 		       const struct usb_device_id *id)
 {
@@ -2849,6 +2967,18 @@ static int btusb_probe(struct usb_interface *intf,
 	hdev->send   = btusb_send_frame;
 	hdev->notify = btusb_notify;
 
+#ifdef CONFIG_PM
+	err = btusb_config_oob_wake(hdev);
+	if (err)
+		goto out_free_dev;
+
+	/* Marvell devices may need a specific chip configuration */
+	if (id->driver_info & BTUSB_MARVELL && data->oob_wake_irq) {
+		err = marvell_config_oob_wake(hdev);
+		if (err)
+			goto out_free_dev;
+	}
+#endif
 	if (id->driver_info & BTUSB_CW6622)
 		set_bit(HCI_QUIRK_BROKEN_STORED_LINK_KEY, &hdev->quirks);
 
@@ -2991,18 +3121,15 @@ static int btusb_probe(struct usb_interface *intf,
 		err = usb_set_interface(data->udev, 0, 0);
 		if (err < 0) {
 			BT_ERR("failed to set interface 0, alt 0 %d", err);
-			hci_free_dev(hdev);
-			return err;
+			goto out_free_dev;
 		}
 	}
 
 	if (data->isoc) {
 		err = usb_driver_claim_interface(&btusb_driver,
 						 data->isoc, data);
-		if (err < 0) {
-			hci_free_dev(hdev);
-			return err;
-		}
+		if (err < 0)
+			goto out_free_dev;
 	}
 
 #ifdef CONFIG_BT_HCIBTUSB_BCM
@@ -3016,14 +3143,16 @@ static int btusb_probe(struct usb_interface *intf,
 #endif
 
 	err = hci_register_dev(hdev);
-	if (err < 0) {
-		hci_free_dev(hdev);
-		return err;
-	}
+	if (err < 0)
+		goto out_free_dev;
 
 	usb_set_intfdata(intf, data);
 
 	return 0;
+
+out_free_dev:
+	hci_free_dev(hdev);
+	return err;
 }
 
 static void btusb_disconnect(struct usb_interface *intf)
@@ -3062,6 +3191,9 @@ static void btusb_disconnect(struct usb_interface *intf)
 			usb_driver_release_interface(&btusb_driver, data->isoc);
 	}
 
+	if (data->oob_wake_irq)
+		device_init_wakeup(&data->udev->dev, false);
+
 	hci_free_dev(hdev);
 }
 
@@ -3090,6 +3222,12 @@ static int btusb_suspend(struct usb_interface *intf, pm_message_t message)
 	btusb_stop_traffic(data);
 	usb_kill_anchored_urbs(&data->tx_anchor);
 
+	if (data->oob_wake_irq && device_may_wakeup(&data->udev->dev)) {
+		set_bit(BTUSB_OOB_WAKE_ENABLED, &data->flags);
+		enable_irq_wake(data->oob_wake_irq);
+		enable_irq(data->oob_wake_irq);
+	}
+
 	/* Optionally request a device reset on resume, but only when
 	 * wakeups are disabled. If wakeups are enabled we assume the
 	 * device will stay powered up throughout suspend.
@@ -3127,6 +3265,12 @@ static int btusb_resume(struct usb_interface *intf)
 	if (--data->suspend_count)
 		return 0;
 
+	/* Disable only if not already disabled (keep it balanced) */
+	if (test_and_clear_bit(BTUSB_OOB_WAKE_ENABLED, &data->flags)) {
+		disable_irq(data->oob_wake_irq);
+		disable_irq_wake(data->oob_wake_irq);
+	}
+
 	if (!test_bit(HCI_RUNNING, &hdev->flags))
 		goto done;
 
diff --git a/drivers/bluetooth/hci_bcm.c b/drivers/bluetooth/hci_bcm.c
index 8f6c23c20c52..5262a2077d7a 100644
--- a/drivers/bluetooth/hci_bcm.c
+++ b/drivers/bluetooth/hci_bcm.c
@@ -618,14 +618,25 @@ unlock:
 }
 #endif
 
-static const struct acpi_gpio_params device_wakeup_gpios = { 0, 0, false };
-static const struct acpi_gpio_params shutdown_gpios = { 1, 0, false };
-static const struct acpi_gpio_params host_wakeup_gpios = { 2, 0, false };
-
-static const struct acpi_gpio_mapping acpi_bcm_default_gpios[] = {
-	{ "device-wakeup-gpios", &device_wakeup_gpios, 1 },
-	{ "shutdown-gpios", &shutdown_gpios, 1 },
-	{ "host-wakeup-gpios", &host_wakeup_gpios, 1 },
+static const struct acpi_gpio_params int_last_device_wakeup_gpios = { 0, 0, false };
+static const struct acpi_gpio_params int_last_shutdown_gpios = { 1, 0, false };
+static const struct acpi_gpio_params int_last_host_wakeup_gpios = { 2, 0, false };
+
+static const struct acpi_gpio_mapping acpi_bcm_int_last_gpios[] = {
+	{ "device-wakeup-gpios", &int_last_device_wakeup_gpios, 1 },
+	{ "shutdown-gpios", &int_last_shutdown_gpios, 1 },
+	{ "host-wakeup-gpios", &int_last_host_wakeup_gpios, 1 },
+	{ },
+};
+
+static const struct acpi_gpio_params int_first_host_wakeup_gpios = { 0, 0, false };
+static const struct acpi_gpio_params int_first_device_wakeup_gpios = { 1, 0, false };
+static const struct acpi_gpio_params int_first_shutdown_gpios = { 2, 0, false };
+
+static const struct acpi_gpio_mapping acpi_bcm_int_first_gpios[] = {
+	{ "device-wakeup-gpios", &int_first_device_wakeup_gpios, 1 },
+	{ "shutdown-gpios", &int_first_shutdown_gpios, 1 },
+	{ "host-wakeup-gpios", &int_first_host_wakeup_gpios, 1 },
 	{ },
 };
 
@@ -692,12 +703,19 @@ static int bcm_acpi_probe(struct bcm_device *dev)
 	struct platform_device *pdev = dev->pdev;
 	LIST_HEAD(resources);
 	const struct dmi_system_id *dmi_id;
+	const struct acpi_gpio_mapping *gpio_mapping = acpi_bcm_int_last_gpios;
+	const struct acpi_device_id *id;
 	int ret;
 
-	/* Retrieve GPIO data */
 	dev->name = dev_name(&pdev->dev);
+
+	/* Retrieve GPIO data */
+	id = acpi_match_device(pdev->dev.driver->acpi_match_table, &pdev->dev);
+	if (id)
+		gpio_mapping = (const struct acpi_gpio_mapping *) id->driver_data;
+
 	ret = acpi_dev_add_driver_gpios(ACPI_COMPANION(&pdev->dev),
-					acpi_bcm_default_gpios);
+					gpio_mapping);
 	if (ret)
 		return ret;
 
@@ -822,20 +840,22 @@ static const struct hci_uart_proto bcm_proto = {
 
 #ifdef CONFIG_ACPI
 static const struct acpi_device_id bcm_acpi_match[] = {
-	{ "BCM2E1A", 0 },
-	{ "BCM2E39", 0 },
-	{ "BCM2E3A", 0 },
-	{ "BCM2E3D", 0 },
-	{ "BCM2E3F", 0 },
-	{ "BCM2E40", 0 },
-	{ "BCM2E54", 0 },
-	{ "BCM2E55", 0 },
-	{ "BCM2E64", 0 },
-	{ "BCM2E65", 0 },
-	{ "BCM2E67", 0 },
-	{ "BCM2E71", 0 },
-	{ "BCM2E7B", 0 },
-	{ "BCM2E7C", 0 },
+	{ "BCM2E1A", (kernel_ulong_t)&acpi_bcm_int_last_gpios },
+	{ "BCM2E39", (kernel_ulong_t)&acpi_bcm_int_last_gpios },
+	{ "BCM2E3A", (kernel_ulong_t)&acpi_bcm_int_last_gpios },
+	{ "BCM2E3D", (kernel_ulong_t)&acpi_bcm_int_last_gpios },
+	{ "BCM2E3F", (kernel_ulong_t)&acpi_bcm_int_last_gpios },
+	{ "BCM2E40", (kernel_ulong_t)&acpi_bcm_int_last_gpios },
+	{ "BCM2E54", (kernel_ulong_t)&acpi_bcm_int_last_gpios },
+	{ "BCM2E55", (kernel_ulong_t)&acpi_bcm_int_last_gpios },
+	{ "BCM2E64", (kernel_ulong_t)&acpi_bcm_int_last_gpios },
+	{ "BCM2E65", (kernel_ulong_t)&acpi_bcm_int_last_gpios },
+	{ "BCM2E67", (kernel_ulong_t)&acpi_bcm_int_last_gpios },
+	{ "BCM2E71", (kernel_ulong_t)&acpi_bcm_int_last_gpios },
+	{ "BCM2E7B", (kernel_ulong_t)&acpi_bcm_int_last_gpios },
+	{ "BCM2E7C", (kernel_ulong_t)&acpi_bcm_int_last_gpios },
+	{ "BCM2E95", (kernel_ulong_t)&acpi_bcm_int_first_gpios },
+	{ "BCM2E96", (kernel_ulong_t)&acpi_bcm_int_first_gpios },
 	{ },
 };
 MODULE_DEVICE_TABLE(acpi, bcm_acpi_match);
diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
index 05c230719a47..f242dfd0c2e2 100644
--- a/drivers/bluetooth/hci_qca.c
+++ b/drivers/bluetooth/hci_qca.c
@@ -335,7 +335,7 @@ static void hci_ibs_tx_idle_timeout(unsigned long arg)
 		/* Fall through */
 
 	default:
-		BT_ERR("Spurrious timeout tx state %d", qca->tx_ibs_state);
+		BT_ERR("Spurious timeout tx state %d", qca->tx_ibs_state);
 		break;
 	}
 
@@ -373,7 +373,7 @@ static void hci_ibs_wake_retrans_timeout(unsigned long arg)
 		/* Fall through */
 
 	default:
-		BT_ERR("Spurrious timeout tx state %d", qca->tx_ibs_state);
+		BT_ERR("Spurious timeout tx state %d", qca->tx_ibs_state);
 		break;
 	}