bus: mhi: ep: Add support for processing command rings

Add support for processing the command rings. Command ring is used by the
host to issue channel specific commands to the ep device. Following
commands are supported:

1. Start channel
2. Stop channel
3. Reset channel

Once the device receives the command doorbell interrupt from host, it
executes the command and generates a command completion event to the
host in the primary event ring.

Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

1 files changed, 189 insertions, 1 deletions

diff --git a/drivers/bus/mhi/ep/main.c b/drivers/bus/mhi/ep/main.c
index 706473ea4918..32ac567e0f67 100644
--- a/drivers/bus/mhi/ep/main.c
+++ b/drivers/bus/mhi/ep/main.c
@@ -22,6 +22,7 @@
 
 static DEFINE_IDA(mhi_ep_cntrl_ida);
 
+static int mhi_ep_create_device(struct mhi_ep_cntrl *mhi_cntrl, u32 ch_id);
 static int mhi_ep_destroy_device(struct device *dev, void *data);
 
 static int mhi_ep_send_event(struct mhi_ep_cntrl *mhi_cntrl, u32 ring_idx,
@@ -111,6 +112,156 @@ static int mhi_ep_send_cmd_comp_event(struct mhi_ep_cntrl *mhi_cntrl, enum mhi_e
 	return mhi_ep_send_event(mhi_cntrl, 0, &event, 0);
 }
 
+static int mhi_ep_process_cmd_ring(struct mhi_ep_ring *ring, struct mhi_ring_element *el)
+{
+	struct mhi_ep_cntrl *mhi_cntrl = ring->mhi_cntrl;
+	struct device *dev = &mhi_cntrl->mhi_dev->dev;
+	struct mhi_result result = {};
+	struct mhi_ep_chan *mhi_chan;
+	struct mhi_ep_ring *ch_ring;
+	u32 tmp, ch_id;
+	int ret;
+
+	ch_id = MHI_TRE_GET_CMD_CHID(el);
+	mhi_chan = &mhi_cntrl->mhi_chan[ch_id];
+	ch_ring = &mhi_cntrl->mhi_chan[ch_id].ring;
+
+	switch (MHI_TRE_GET_CMD_TYPE(el)) {
+	case MHI_PKT_TYPE_START_CHAN_CMD:
+		dev_dbg(dev, "Received START command for channel (%u)\n", ch_id);
+
+		mutex_lock(&mhi_chan->lock);
+		/* Initialize and configure the corresponding channel ring */
+		if (!ch_ring->started) {
+			ret = mhi_ep_ring_start(mhi_cntrl, ch_ring,
+				(union mhi_ep_ring_ctx *)&mhi_cntrl->ch_ctx_cache[ch_id]);
+			if (ret) {
+				dev_err(dev, "Failed to start ring for channel (%u)\n", ch_id);
+				ret = mhi_ep_send_cmd_comp_event(mhi_cntrl,
+							MHI_EV_CC_UNDEFINED_ERR);
+				if (ret)
+					dev_err(dev, "Error sending completion event: %d\n", ret);
+
+				goto err_unlock;
+			}
+		}
+
+		/* Set channel state to RUNNING */
+		mhi_chan->state = MHI_CH_STATE_RUNNING;
+		tmp = le32_to_cpu(mhi_cntrl->ch_ctx_cache[ch_id].chcfg);
+		tmp &= ~CHAN_CTX_CHSTATE_MASK;
+		tmp |= FIELD_PREP(CHAN_CTX_CHSTATE_MASK, MHI_CH_STATE_RUNNING);
+		mhi_cntrl->ch_ctx_cache[ch_id].chcfg = cpu_to_le32(tmp);
+
+		ret = mhi_ep_send_cmd_comp_event(mhi_cntrl, MHI_EV_CC_SUCCESS);
+		if (ret) {
+			dev_err(dev, "Error sending command completion event (%u)\n",
+				MHI_EV_CC_SUCCESS);
+			goto err_unlock;
+		}
+
+		mutex_unlock(&mhi_chan->lock);
+
+		/*
+		 * Create MHI device only during UL channel start. Since the MHI
+		 * channels operate in a pair, we'll associate both UL and DL
+		 * channels to the same device.
+		 *
+		 * We also need to check for mhi_dev != NULL because, the host
+		 * will issue START_CHAN command during resume and we don't
+		 * destroy the device during suspend.
+		 */
+		if (!(ch_id % 2) && !mhi_chan->mhi_dev) {
+			ret = mhi_ep_create_device(mhi_cntrl, ch_id);
+			if (ret) {
+				dev_err(dev, "Error creating device for channel (%u)\n", ch_id);
+				mhi_ep_handle_syserr(mhi_cntrl);
+				return ret;
+			}
+		}
+
+		/* Finally, enable DB for the channel */
+		mhi_ep_mmio_enable_chdb(mhi_cntrl, ch_id);
+
+		break;
+	case MHI_PKT_TYPE_STOP_CHAN_CMD:
+		dev_dbg(dev, "Received STOP command for channel (%u)\n", ch_id);
+		if (!ch_ring->started) {
+			dev_err(dev, "Channel (%u) not opened\n", ch_id);
+			return -ENODEV;
+		}
+
+		mutex_lock(&mhi_chan->lock);
+		/* Disable DB for the channel */
+		mhi_ep_mmio_disable_chdb(mhi_cntrl, ch_id);
+
+		/* Send channel disconnect status to client drivers */
+		result.transaction_status = -ENOTCONN;
+		result.bytes_xferd = 0;
+		mhi_chan->xfer_cb(mhi_chan->mhi_dev, &result);
+
+		/* Set channel state to STOP */
+		mhi_chan->state = MHI_CH_STATE_STOP;
+		tmp = le32_to_cpu(mhi_cntrl->ch_ctx_cache[ch_id].chcfg);
+		tmp &= ~CHAN_CTX_CHSTATE_MASK;
+		tmp |= FIELD_PREP(CHAN_CTX_CHSTATE_MASK, MHI_CH_STATE_STOP);
+		mhi_cntrl->ch_ctx_cache[ch_id].chcfg = cpu_to_le32(tmp);
+
+		ret = mhi_ep_send_cmd_comp_event(mhi_cntrl, MHI_EV_CC_SUCCESS);
+		if (ret) {
+			dev_err(dev, "Error sending command completion event (%u)\n",
+				MHI_EV_CC_SUCCESS);
+			goto err_unlock;
+		}
+
+		mutex_unlock(&mhi_chan->lock);
+		break;
+	case MHI_PKT_TYPE_RESET_CHAN_CMD:
+		dev_dbg(dev, "Received STOP command for channel (%u)\n", ch_id);
+		if (!ch_ring->started) {
+			dev_err(dev, "Channel (%u) not opened\n", ch_id);
+			return -ENODEV;
+		}
+
+		mutex_lock(&mhi_chan->lock);
+		/* Stop and reset the transfer ring */
+		mhi_ep_ring_reset(mhi_cntrl, ch_ring);
+
+		/* Send channel disconnect status to client driver */
+		result.transaction_status = -ENOTCONN;
+		result.bytes_xferd = 0;
+		mhi_chan->xfer_cb(mhi_chan->mhi_dev, &result);
+
+		/* Set channel state to DISABLED */
+		mhi_chan->state = MHI_CH_STATE_DISABLED;
+		tmp = le32_to_cpu(mhi_cntrl->ch_ctx_cache[ch_id].chcfg);
+		tmp &= ~CHAN_CTX_CHSTATE_MASK;
+		tmp |= FIELD_PREP(CHAN_CTX_CHSTATE_MASK, MHI_CH_STATE_DISABLED);
+		mhi_cntrl->ch_ctx_cache[ch_id].chcfg = cpu_to_le32(tmp);
+
+		ret = mhi_ep_send_cmd_comp_event(mhi_cntrl, MHI_EV_CC_SUCCESS);
+		if (ret) {
+			dev_err(dev, "Error sending command completion event (%u)\n",
+				MHI_EV_CC_SUCCESS);
+			goto err_unlock;
+		}
+
+		mutex_unlock(&mhi_chan->lock);
+		break;
+	default:
+		dev_err(dev, "Invalid command received: %lu for channel (%u)\n",
+			MHI_TRE_GET_CMD_TYPE(el), ch_id);
+		return -EINVAL;
+	}
+
+	return 0;
+
+err_unlock:
+	mutex_unlock(&mhi_chan->lock);
+
+	return ret;
+}
+
 static int mhi_ep_cache_host_cfg(struct mhi_ep_cntrl *mhi_cntrl)
 {
 	size_t cmd_ctx_host_size, ch_ctx_host_size, ev_ctx_host_size;
@@ -259,6 +410,40 @@ static int mhi_ep_enable(struct mhi_ep_cntrl *mhi_cntrl)
 	return 0;
 }
 
+static void mhi_ep_cmd_ring_worker(struct work_struct *work)
+{
+	struct mhi_ep_cntrl *mhi_cntrl = container_of(work, struct mhi_ep_cntrl, cmd_ring_work);
+	struct mhi_ep_ring *ring = &mhi_cntrl->mhi_cmd->ring;
+	struct device *dev = &mhi_cntrl->mhi_dev->dev;
+	struct mhi_ring_element *el;
+	int ret;
+
+	/* Update the write offset for the ring */
+	ret = mhi_ep_update_wr_offset(ring);
+	if (ret) {
+		dev_err(dev, "Error updating write offset for ring\n");
+		return;
+	}
+
+	/* Sanity check to make sure there are elements in the ring */
+	if (ring->rd_offset == ring->wr_offset)
+		return;
+
+	/*
+	 * Process command ring element till write offset. In case of an error, just try to
+	 * process next element.
+	 */
+	while (ring->rd_offset != ring->wr_offset) {
+		el = &ring->ring_cache[ring->rd_offset];
+
+		ret = mhi_ep_process_cmd_ring(ring, el);
+		if (ret)
+			dev_err(dev, "Error processing cmd ring element: %zu\n", ring->rd_offset);
+
+		mhi_ep_ring_inc_index(ring);
+	}
+}
+
 static void mhi_ep_state_worker(struct work_struct *work)
 {
 	struct mhi_ep_cntrl *mhi_cntrl = container_of(work, struct mhi_ep_cntrl, state_work);
@@ -402,8 +587,10 @@ static irqreturn_t mhi_ep_irq(int irq, void *data)
 	}
 
 	/* Check for command doorbell interrupt */
-	if (FIELD_GET(MHI_CTRL_INT_STATUS_CRDB_MSK, int_value))
+	if (FIELD_GET(MHI_CTRL_INT_STATUS_CRDB_MSK, int_value)) {
 		dev_dbg(dev, "Processing command doorbell interrupt\n");
+		queue_work(mhi_cntrl->wq, &mhi_cntrl->cmd_ring_work);
+	}
 
 	/* Check for channel interrupts */
 	mhi_ep_check_channel_interrupt(mhi_cntrl);
@@ -811,6 +998,7 @@ int mhi_ep_register_controller(struct mhi_ep_cntrl *mhi_cntrl,
 
 	INIT_WORK(&mhi_cntrl->state_work, mhi_ep_state_worker);
 	INIT_WORK(&mhi_cntrl->reset_work, mhi_ep_reset_worker);
+	INIT_WORK(&mhi_cntrl->cmd_ring_work, mhi_ep_cmd_ring_worker);
 
 	mhi_cntrl->wq = alloc_workqueue("mhi_ep_wq", 0, 0);
 	if (!mhi_cntrl->wq) {