aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/clk/meson
diff options
context:
space:
mode:
authorMartin Blumenstingl <martin.blumenstingl@googlemail.com>2017-07-28 23:13:12 +0200
committerNeil Armstrong <narmstrong@baylibre.com>2017-08-04 18:01:58 +0200
commit189621726bc2f66cce670bebaedaa6c57326b25d (patch)
tree652c1045a47c9d4f54cc671226d8dad882169c7b /drivers/clk/meson
parentdt-bindings: clock: gxbb-aoclk: Add CEC 32k clock (diff)
downloadlinux-dev-189621726bc2f66cce670bebaedaa6c57326b25d.tar.xz
linux-dev-189621726bc2f66cce670bebaedaa6c57326b25d.zip
clk: meson: meson8b: register the built-in reset controller
The clock controller also includes some reset lines. This patch implements a reset controller to assert and de-assert these resets. The reset controller itself is registered early (through CLK_OF_DECLARE_DRIVER) because it is needed very early in the boot process (to start the secondary CPU cores). According to the public S805 datasheet there are two more reset bits in the HHI_SYS_CPU_CLK_CNTL0 register, which are not implemented by this patch (as these seem to be unused in Amlogic's vendor Linux kernel sources and their u-boot tree): - bit 15: GEN_DIV_SOFT_RESET - bit 14: SOFT_RESET All information was taken from the public S805 Datasheet and Amlogic's vendor GPL kernel sources. This patch is based on an earlier version submitted by Carlo Caione. Suggested-by: Carlo Caione <carlo@endlessm.com> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Diffstat (limited to 'drivers/clk/meson')
-rw-r--r--drivers/clk/meson/Kconfig1
-rw-r--r--drivers/clk/meson/meson8b.c159
-rw-r--r--drivers/clk/meson/meson8b.h9
3 files changed, 156 insertions, 13 deletions
diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig
index 5588f75a8414..d2d0174a6eca 100644
--- a/drivers/clk/meson/Kconfig
+++ b/drivers/clk/meson/Kconfig
@@ -6,6 +6,7 @@ config COMMON_CLK_AMLOGIC
config COMMON_CLK_MESON8B
bool
depends on COMMON_CLK_AMLOGIC
+ select RESET_CONTROLLER
help
Support for the clock controller on AmLogic S802 (Meson8),
S805 (Meson8b) and S812 (Meson8m2) devices. Say Y if you
diff --git a/drivers/clk/meson/meson8b.c b/drivers/clk/meson/meson8b.c
index 7629aa09472a..469ee8a84898 100644
--- a/drivers/clk/meson/meson8b.c
+++ b/drivers/clk/meson/meson8b.c
@@ -25,6 +25,8 @@
#include <linux/clk-provider.h>
#include <linux/of_address.h>
#include <linux/platform_device.h>
+#include <linux/reset-controller.h>
+#include <linux/slab.h>
#include <linux/init.h>
#include "clkc.h"
@@ -32,6 +34,13 @@
static DEFINE_SPINLOCK(clk_lock);
+static void __iomem *clk_base;
+
+struct meson8b_clk_reset {
+ struct reset_controller_dev reset;
+ void __iomem *base;
+};
+
static const struct pll_rate_table sys_pll_rate_table[] = {
PLL_RATE(312000000, 52, 1, 2),
PLL_RATE(336000000, 56, 1, 2),
@@ -691,20 +700,114 @@ static struct clk_divider *const meson8b_clk_dividers[] = {
&meson8b_mpeg_clk_div,
};
+static const struct meson8b_clk_reset_line {
+ u32 reg;
+ u8 bit_idx;
+} meson8b_clk_reset_bits[] = {
+ [CLKC_RESET_L2_CACHE_SOFT_RESET] = {
+ .reg = HHI_SYS_CPU_CLK_CNTL0, .bit_idx = 30
+ },
+ [CLKC_RESET_AXI_64_TO_128_BRIDGE_A5_SOFT_RESET] = {
+ .reg = HHI_SYS_CPU_CLK_CNTL0, .bit_idx = 29
+ },
+ [CLKC_RESET_SCU_SOFT_RESET] = {
+ .reg = HHI_SYS_CPU_CLK_CNTL0, .bit_idx = 28
+ },
+ [CLKC_RESET_CPU3_SOFT_RESET] = {
+ .reg = HHI_SYS_CPU_CLK_CNTL0, .bit_idx = 27
+ },
+ [CLKC_RESET_CPU2_SOFT_RESET] = {
+ .reg = HHI_SYS_CPU_CLK_CNTL0, .bit_idx = 26
+ },
+ [CLKC_RESET_CPU1_SOFT_RESET] = {
+ .reg = HHI_SYS_CPU_CLK_CNTL0, .bit_idx = 25
+ },
+ [CLKC_RESET_CPU0_SOFT_RESET] = {
+ .reg = HHI_SYS_CPU_CLK_CNTL0, .bit_idx = 24
+ },
+ [CLKC_RESET_A5_GLOBAL_RESET] = {
+ .reg = HHI_SYS_CPU_CLK_CNTL0, .bit_idx = 18
+ },
+ [CLKC_RESET_A5_AXI_SOFT_RESET] = {
+ .reg = HHI_SYS_CPU_CLK_CNTL0, .bit_idx = 17
+ },
+ [CLKC_RESET_A5_ABP_SOFT_RESET] = {
+ .reg = HHI_SYS_CPU_CLK_CNTL0, .bit_idx = 16
+ },
+ [CLKC_RESET_AXI_64_TO_128_BRIDGE_MMC_SOFT_RESET] = {
+ .reg = HHI_SYS_CPU_CLK_CNTL1, .bit_idx = 30
+ },
+ [CLKC_RESET_VID_CLK_CNTL_SOFT_RESET] = {
+ .reg = HHI_VID_CLK_CNTL, .bit_idx = 15
+ },
+ [CLKC_RESET_VID_DIVIDER_CNTL_SOFT_RESET_POST] = {
+ .reg = HHI_VID_DIVIDER_CNTL, .bit_idx = 7
+ },
+ [CLKC_RESET_VID_DIVIDER_CNTL_SOFT_RESET_PRE] = {
+ .reg = HHI_VID_DIVIDER_CNTL, .bit_idx = 3
+ },
+ [CLKC_RESET_VID_DIVIDER_CNTL_RESET_N_POST] = {
+ .reg = HHI_VID_DIVIDER_CNTL, .bit_idx = 1
+ },
+ [CLKC_RESET_VID_DIVIDER_CNTL_RESET_N_PRE] = {
+ .reg = HHI_VID_DIVIDER_CNTL, .bit_idx = 0
+ },
+};
+
+static int meson8b_clk_reset_update(struct reset_controller_dev *rcdev,
+ unsigned long id, bool assert)
+{
+ struct meson8b_clk_reset *meson8b_clk_reset =
+ container_of(rcdev, struct meson8b_clk_reset, reset);
+ unsigned long flags;
+ const struct meson8b_clk_reset_line *reset;
+ u32 val;
+
+ if (id >= ARRAY_SIZE(meson8b_clk_reset_bits))
+ return -EINVAL;
+
+ reset = &meson8b_clk_reset_bits[id];
+
+ spin_lock_irqsave(&clk_lock, flags);
+
+ val = readl(meson8b_clk_reset->base + reset->reg);
+ if (assert)
+ val |= BIT(reset->bit_idx);
+ else
+ val &= ~BIT(reset->bit_idx);
+ writel(val, meson8b_clk_reset->base + reset->reg);
+
+ spin_unlock_irqrestore(&clk_lock, flags);
+
+ return 0;
+}
+
+static int meson8b_clk_reset_assert(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ return meson8b_clk_reset_update(rcdev, id, true);
+}
+
+static int meson8b_clk_reset_deassert(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ return meson8b_clk_reset_update(rcdev, id, false);
+}
+
+static const struct reset_control_ops meson8b_clk_reset_ops = {
+ .assert = meson8b_clk_reset_assert,
+ .deassert = meson8b_clk_reset_deassert,
+};
+
static int meson8b_clkc_probe(struct platform_device *pdev)
{
- void __iomem *clk_base;
int ret, clkid, i;
struct clk_hw *parent_hw;
struct clk *parent_clk;
struct device *dev = &pdev->dev;
- /* Generic clocks and PLLs */
- clk_base = of_iomap(dev->of_node, 1);
- if (!clk_base) {
- pr_err("%s: Unable to map clk base\n", __func__);
+ if (!clk_base)
return -ENXIO;
- }
/* Populate base address for PLLs */
for (i = 0; i < ARRAY_SIZE(meson8b_clk_plls); i++)
@@ -744,7 +847,7 @@ static int meson8b_clkc_probe(struct platform_device *pdev)
/* FIXME convert to devm_clk_register */
ret = devm_clk_hw_register(dev, meson8b_hw_onecell_data.hws[clkid]);
if (ret)
- goto iounmap;
+ return ret;
}
/*
@@ -767,15 +870,11 @@ static int meson8b_clkc_probe(struct platform_device *pdev)
if (ret) {
pr_err("%s: failed to register clock notifier for cpu_clk\n",
__func__);
- goto iounmap;
+ return ret;
}
return of_clk_add_hw_provider(dev->of_node, of_clk_hw_onecell_get,
&meson8b_hw_onecell_data);
-
-iounmap:
- iounmap(clk_base);
- return ret;
}
static const struct of_device_id meson8b_clkc_match_table[] = {
@@ -794,3 +893,39 @@ static struct platform_driver meson8b_driver = {
};
builtin_platform_driver(meson8b_driver);
+
+static void __init meson8b_clkc_reset_init(struct device_node *np)
+{
+ struct meson8b_clk_reset *rstc;
+ int ret;
+
+ /* Generic clocks, PLLs and some of the reset-bits */
+ clk_base = of_iomap(np, 1);
+ if (!clk_base) {
+ pr_err("%s: Unable to map clk base\n", __func__);
+ return;
+ }
+
+ rstc = kzalloc(sizeof(*rstc), GFP_KERNEL);
+ if (!rstc)
+ return;
+
+ /* Reset Controller */
+ rstc->base = clk_base;
+ rstc->reset.ops = &meson8b_clk_reset_ops;
+ rstc->reset.nr_resets = ARRAY_SIZE(meson8b_clk_reset_bits);
+ rstc->reset.of_node = np;
+ ret = reset_controller_register(&rstc->reset);
+ if (ret) {
+ pr_err("%s: Failed to register clkc reset controller: %d\n",
+ __func__, ret);
+ return;
+ }
+}
+
+CLK_OF_DECLARE_DRIVER(meson8_clkc, "amlogic,meson8-clkc",
+ meson8b_clkc_reset_init);
+CLK_OF_DECLARE_DRIVER(meson8b_clkc, "amlogic,meson8b-clkc",
+ meson8b_clkc_reset_init);
+CLK_OF_DECLARE_DRIVER(meson8m2_clkc, "amlogic,meson8m2-clkc",
+ meson8b_clkc_reset_init);
diff --git a/drivers/clk/meson/meson8b.h b/drivers/clk/meson/meson8b.h
index c139bb3273ca..2eaf8a52e7dd 100644
--- a/drivers/clk/meson/meson8b.h
+++ b/drivers/clk/meson/meson8b.h
@@ -37,6 +37,9 @@
#define HHI_GCLK_AO 0x154 /* 0x55 offset in data sheet */
#define HHI_SYS_CPU_CLK_CNTL1 0x15c /* 0x57 offset in data sheet */
#define HHI_MPEG_CLK_CNTL 0x174 /* 0x5d offset in data sheet */
+#define HHI_VID_CLK_CNTL 0x17c /* 0x5f offset in data sheet */
+#define HHI_VID_DIVIDER_CNTL 0x198 /* 0x66 offset in data sheet */
+#define HHI_SYS_CPU_CLK_CNTL0 0x19c /* 0x67 offset in data sheet */
#define HHI_MPLL_CNTL 0x280 /* 0xa0 offset in data sheet */
#define HHI_SYS_PLL_CNTL 0x300 /* 0xc0 offset in data sheet */
#define HHI_VID_PLL_CNTL 0x320 /* 0xc8 offset in data sheet */
@@ -68,7 +71,11 @@
#define CLK_NR_CLKS 96
-/* include the CLKIDs that have been made part of the stable DT binding */
+/*
+ * include the CLKID and RESETID that have
+ * been made part of the stable DT binding
+ */
#include <dt-bindings/clock/meson8b-clkc.h>
+#include <dt-bindings/reset/amlogic,meson8b-clkc-reset.h>
#endif /* __MESON8B_H */