diff options
| author |   Geert Uytterhoeven <geert+renesas@glider.be> | 2018-03-15 10:44:37 +0100 |
|---|---|---|
| committer | Geert Uytterhoeven <geert+renesas@glider.be> | 2018-03-21 17:35:00 +0100 |
| commit | 2b935d524d851830b68dd8c58d3098d775d6047a (patch) | |
| tree | 3a610ea9b6cf5ba661622072d55ec62a444c5551 /drivers/clk | |
| parent | clk: renesas: sh73a0: Always use readl()/writel() (diff) | |
| download | linux-dev-2b935d524d851830b68dd8c58d3098d775d6047a.tar.xz linux-dev-2b935d524d851830b68dd8c58d3098d775d6047a.zip | |
clk: renesas: rcar-gen3: Always use readl()/writel()
The R-Car Gen3 CPG/MSSR driver (again) uses a mix of
clk_readl()/clk_writel() and readl()/writel() to access the clock
registers. Settle on the generic readl()/writel().
Cfr. commit 30ad3cf00e94f4a7 ("clk: renesas: rcar-gen3-cpg: Always use
readl()/writel()").
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Diffstat (limited to 'drivers/clk')
| -rw-r--r-- | drivers/clk/renesas/rcar-gen3-cpg.c | 14 |
1 files changed, 7 insertions, 7 deletions
diff --git a/drivers/clk/renesas/rcar-gen3-cpg.c b/drivers/clk/renesas/rcar-gen3-cpg.c index 0c8fe10d57fe..628b63b85d3f 100644 --- a/drivers/clk/renesas/rcar-gen3-cpg.c +++ b/drivers/clk/renesas/rcar-gen3-cpg.c @@ -93,7 +93,7 @@ static unsigned long cpg_z_clk_recalc_rate(struct clk_hw *hw, unsigned int mult; u32 val; - val = clk_readl(zclk->reg) & zclk->mask; + val = readl(zclk->reg) & zclk->mask; mult = 32 - (val >> __ffs(zclk->mask)); /* Factor of 2 is for fixed divider */ @@ -125,20 +125,20 @@ static int cpg_z_clk_set_rate(struct clk_hw *hw, unsigned long rate, mult = DIV_ROUND_CLOSEST_ULL(rate * 32ULL * 2, parent_rate); mult = clamp(mult, 1U, 32U); - if (clk_readl(zclk->kick_reg) & CPG_FRQCRB_KICK) + if (readl(zclk->kick_reg) & CPG_FRQCRB_KICK) return -EBUSY; - val = clk_readl(zclk->reg) & ~zclk->mask; + val = readl(zclk->reg) & ~zclk->mask; val |= ((32 - mult) << __ffs(zclk->mask)) & zclk->mask; - clk_writel(val, zclk->reg); + writel(val, zclk->reg); /* * Set KICK bit in FRQCRB to update hardware setting and wait for * clock change completion. */ - kick = clk_readl(zclk->kick_reg); + kick = readl(zclk->kick_reg); kick |= CPG_FRQCRB_KICK; - clk_writel(kick, zclk->kick_reg); + writel(kick, zclk->kick_reg); /* * Note: There is no HW information about the worst case latency. @@ -150,7 +150,7 @@ static int cpg_z_clk_set_rate(struct clk_hw *hw, unsigned long rate, * "super" safe value. */ for (i = 1000; i; i--) { - if (!(clk_readl(zclk->kick_reg) & CPG_FRQCRB_KICK)) + if (!(readl(zclk->kick_reg) & CPG_FRQCRB_KICK)) return 0; cpu_relax(); |