crypto: cavium/nitrox - added support to identify the NITROX device partname.

Get the device partname based on it's capabilities like,
core frequency, number of cores and revision id.

Signed-off-by: Srikanth Jampala <Jampala.Srikanth@cavium.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

1 files changed, 111 insertions, 0 deletions

diff --git a/drivers/crypto/cavium/nitrox/nitrox_csr.h b/drivers/crypto/cavium/nitrox/nitrox_csr.h
index 9dcb7fdbe0a7..1ad27b1a87c5 100644
--- a/drivers/crypto/cavium/nitrox/nitrox_csr.h
+++ b/drivers/crypto/cavium/nitrox/nitrox_csr.h
@@ -7,9 +7,16 @@
 
 /* EMU clusters */
 #define NR_CLUSTERS		4
+/* Maximum cores per cluster,
+ * varies based on partname
+ */
 #define AE_CORES_PER_CLUSTER	20
 #define SE_CORES_PER_CLUSTER	16
 
+#define AE_MAX_CORES	(AE_CORES_PER_CLUSTER * NR_CLUSTERS)
+#define SE_MAX_CORES	(SE_CORES_PER_CLUSTER * NR_CLUSTERS)
+#define ZIP_MAX_CORES	5
+
 /* BIST registers */
 #define EMU_BIST_STATUSX(_i)	(0x1402700 + ((_i) * 0x40000))
 #define UCD_BIST_STATUS		0x12C0070
@@ -111,6 +118,9 @@
 #define LBC_ELM_VF65_128_INT		0x120C000
 #define LBC_ELM_VF65_128_INT_ENA_W1S	0x120F000
 
+#define RST_BOOT	0x10C1600
+#define FUS_DAT1	0x10C1408
+
 /* PEM registers */
 #define PEM0_INT 0x1080428
 
@@ -1082,4 +1092,105 @@ union lbc_inval_status {
 	} s;
 };
 
+/**
+ * struct rst_boot: RST Boot Register
+ * @jtcsrdis: when set, internal CSR access via JTAG TAP controller
+ *   is disabled
+ * @jt_tst_mode: JTAG test mode
+ * @io_supply: I/O power supply setting based on IO_VDD_SELECT pin:
+ *    0x1 = 1.8V
+ *    0x2 = 2.5V
+ *    0x4 = 3.3V
+ *    All other values are reserved
+ * @pnr_mul: clock multiplier
+ * @lboot: last boot cause mask, resets only with PLL_DC_OK
+ * @rboot: determines whether core 0 remains in reset after
+ *    chip cold or warm or soft reset
+ * @rboot_pin: read only access to REMOTE_BOOT pin
+ */
+union rst_boot {
+	u64 value;
+	struct {
+#if (defined(__BIG_ENDIAN_BITFIELD))
+		u64 raz_63 : 1;
+		u64 jtcsrdis : 1;
+		u64 raz_59_61 : 3;
+		u64 jt_tst_mode : 1;
+		u64 raz_40_57 : 18;
+		u64 io_supply : 3;
+		u64 raz_30_36 : 7;
+		u64 pnr_mul : 6;
+		u64 raz_12_23 : 12;
+		u64 lboot : 10;
+		u64 rboot : 1;
+		u64 rboot_pin : 1;
+#else
+		u64 rboot_pin : 1;
+		u64 rboot : 1;
+		u64 lboot : 10;
+		u64 raz_12_23 : 12;
+		u64 pnr_mul : 6;
+		u64 raz_30_36 : 7;
+		u64 io_supply : 3;
+		u64 raz_40_57 : 18;
+		u64 jt_tst_mode : 1;
+		u64 raz_59_61 : 3;
+		u64 jtcsrdis : 1;
+		u64 raz_63 : 1;
+#endif
+	};
+};
+
+/**
+ * struct fus_dat1: Fuse Data 1 Register
+ * @pll_mul: main clock PLL multiplier hardware limit
+ * @pll_half_dis: main clock PLL control
+ * @efus_lck: efuse lockdown
+ * @zip_info: ZIP information
+ * @bar2_sz_conf: when zero, BAR2 size conforms to
+ *    PCIe specification
+ * @efus_ign: efuse ignore
+ * @nozip: ZIP disable
+ * @pll_alt_matrix: select alternate PLL matrix
+ * @pll_bwadj_denom: select CLKF denominator for
+ *    BWADJ value
+ * @chip_id: chip ID
+ */
+union fus_dat1 {
+	u64 value;
+	struct {
+#if (defined(__BIG_ENDIAN_BITFIELD))
+		u64 raz_57_63 : 7;
+		u64 pll_mul : 3;
+		u64 pll_half_dis : 1;
+		u64 raz_43_52 : 10;
+		u64 efus_lck : 3;
+		u64 raz_26_39 : 14;
+		u64 zip_info : 5;
+		u64 bar2_sz_conf : 1;
+		u64 efus_ign : 1;
+		u64 nozip : 1;
+		u64 raz_11_17 : 7;
+		u64 pll_alt_matrix : 1;
+		u64 pll_bwadj_denom : 2;
+		u64 chip_id : 8;
+#else
+		u64 chip_id : 8;
+		u64 pll_bwadj_denom : 2;
+		u64 pll_alt_matrix : 1;
+		u64 raz_11_17 : 7;
+		u64 nozip : 1;
+		u64 efus_ign : 1;
+		u64 bar2_sz_conf : 1;
+		u64 zip_info : 5;
+		u64 raz_26_39 : 14;
+		u64 efus_lck : 3;
+		u64 raz_43_52 : 10;
+		u64 pll_half_dis : 1;
+		u64 pll_mul : 3;
+		u64 raz_57_63 : 7;
+#endif
+	};
+};
+
 #endif /* __NITROX_CSR_H */