diff options
| author |   Sugar Zhang <sugar.zhang@rock-chips.com> | 2020-11-14 11:55:06 +0800 |
|---|---|---|
| committer |   Vinod Koul <vkoul@kernel.org> | 2020-11-16 22:44:23 +0530 |
| commit | e773ca7da8beeca7f17fe4c9d1284a2b66839cc1 (patch) | |
| tree | d9409aa839e6d680f90886f4df8f9d2cd7a2070e /drivers/dma/pl330.c | |
| parent | dmaengine: ioatdma: remove unused function missed during dma_v2 removal (diff) | |
| download | linux-dev-e773ca7da8beeca7f17fe4c9d1284a2b66839cc1.tar.xz linux-dev-e773ca7da8beeca7f17fe4c9d1284a2b66839cc1.zip | |
dmaengine: pl330: _prep_dma_memcpy: Fix wrong burst size
Actually, burst size is equal to '1 << desc->rqcfg.brst_size'.
we should use burst size, not desc->rqcfg.brst_size.
dma memcpy performance on Rockchip RV1126
@ 1512MHz A7, 1056MHz LPDDR3, 200MHz DMA:
dmatest:
/# echo dma0chan0 > /sys/module/dmatest/parameters/channel
/# echo 4194304 > /sys/module/dmatest/parameters/test_buf_size
/# echo 8 > /sys/module/dmatest/parameters/iterations
/# echo y > /sys/module/dmatest/parameters/norandom
/# echo y > /sys/module/dmatest/parameters/verbose
/# echo 1 > /sys/module/dmatest/parameters/run
dmatest: dma0chan0-copy0: result #1: 'test passed' with src_off=0x0 dst_off=0x0 len=0x400000
dmatest: dma0chan0-copy0: result #2: 'test passed' with src_off=0x0 dst_off=0x0 len=0x400000
dmatest: dma0chan0-copy0: result #3: 'test passed' with src_off=0x0 dst_off=0x0 len=0x400000
dmatest: dma0chan0-copy0: result #4: 'test passed' with src_off=0x0 dst_off=0x0 len=0x400000
dmatest: dma0chan0-copy0: result #5: 'test passed' with src_off=0x0 dst_off=0x0 len=0x400000
dmatest: dma0chan0-copy0: result #6: 'test passed' with src_off=0x0 dst_off=0x0 len=0x400000
dmatest: dma0chan0-copy0: result #7: 'test passed' with src_off=0x0 dst_off=0x0 len=0x400000
dmatest: dma0chan0-copy0: result #8: 'test passed' with src_off=0x0 dst_off=0x0 len=0x400000
Before:
dmatest: dma0chan0-copy0: summary 8 tests, 0 failures 48 iops 200338 KB/s (0)
After this patch:
dmatest: dma0chan0-copy0: summary 8 tests, 0 failures 179 iops 734873 KB/s (0)
After this patch and increase dma clk to 400MHz:
dmatest: dma0chan0-copy0: summary 8 tests, 0 failures 259 iops 1062929 KB/s (0)
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
Link: https://lore.kernel.org/r/1605326106-55681-1-git-send-email-sugar.zhang@rock-chips.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Diffstat (limited to 'drivers/dma/pl330.c')
| -rw-r--r-- | drivers/dma/pl330.c | 2 |
1 files changed, 1 insertions, 1 deletions
diff --git a/drivers/dma/pl330.c b/drivers/dma/pl330.c index e9f0101d92fa..0f5c19370f6d 100644 --- a/drivers/dma/pl330.c +++ b/drivers/dma/pl330.c @@ -2799,7 +2799,7 @@ pl330_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dst, * If burst size is smaller than bus width then make sure we only * transfer one at a time to avoid a burst stradling an MFIFO entry. */ - if (desc->rqcfg.brst_size * 8 < pl330->pcfg.data_bus_width) + if (burst * 8 < pl330->pcfg.data_bus_width) desc->rqcfg.brst_len = 1; desc->bytes_requested = len; |