Merge tag 'drm-fixes-2022-04-08' of git://anongit.freedesktop.org/drm/drm

Pull drm fixes from Dave Airlie:
 "Main set of fixes for rc2, mostly amdgpu, but some dma-fence fixups as
  well, along with some other misc ones.

  dma-fence:
   - fix warning about fence containers
   - fix logic error in new fence merge code
   - handle empty dma_fence_arrays gracefully

  bridge:
   - Try all possible cases for bridge/panel detection.

  bindings:
   - Don't require input port for MIPI-DSI, and make width/height mandatory.

  fbdev:
   - Fix unregistering of framebuffers without device.

  nouveau:
   - Fix a crash when booting with nouveau on tegra.

  amdgpu:
   - GFX 10.3.7 fixes
   - noretry updates
   - VCN fixes
   - TMDS fix
   - zstate fix for freesync video
   - DCN 3.1.5 fix
   - Display stack size fix
   - Audio fix
   - DCN 3.1 pstate fix
   - TMZ VCN fix
   - APU passthrough fix
   - Misc other fixes
   - VCN 3.0 fixes
   - Misc display fixes
   - GC 10.3 golden register fix
   - Suspend fix
   - SMU 10 fix

  amdkfd:
   - Error handling fix
   - xgmi p2p fix
   - HWS VMIDs fix
   - Event fix

  panel:
   - ili9341: Fix optional regulator handling

  imx:
   - Catch an EDID allocation failure in imx-ldb
   - fix a leaked drm display mode on DT parsing error in parallel-display
   - properly remove the dw_hdmi bridge in case the component_add fails in dw_hdmi-imx
   - fix the IPU clock frequency debug printout in ipu-di"

* tag 'drm-fixes-2022-04-08' of git://anongit.freedesktop.org/drm/drm: (61 commits)
  dt-bindings: display: panel: mipi-dbi-spi: Make width-mm/height-mm mandatory
  fbdev: Fix unregistering of framebuffers without device
  drm/amdgpu/smu10: fix SoC/fclk units in auto mode
  drm/amd/display: update dcn315 clock table read
  drm/amdgpu/display: change pipe policy for DCN 2.1
  drm/amd/display: Add configuration options for AUX wake work around.
  drm/amd/display: remove assert for odm transition case
  drm/amdgpu: don't use BACO for reset in S3
  drm/amd/display: Fix by adding FPU protection for dcn30_internal_validate_bw
  drm/amdkfd: Create file descriptor after client is added to smi_clients list
  drm/amdgpu: Sync up header and implementation to use the same parameter names
  drm/amdgpu: fix incorrect GCR_GENERAL_CNTL address
  amd/display: set backlight only if required
  drm/amd/display: Fix allocate_mst_payload assert on resume
  drm/amd/display: Revert FEC check in validation
  drm/amd/display: Add work around for AUX failure on wake.
  drm/amd/display: Clear optc false state when disable otg
  drm/amd/display: Enable power gating before init_pipes
  drm/amd/display: Remove redundant dsc power gating from init_hw
  drm/amd/display: Correct Slice reset calculation
  ...

1 files changed, 17 insertions, 0 deletions

diff --git a/drivers/gpu/drm/amd/pm/amdgpu_dpm.c b/drivers/gpu/drm/amd/pm/amdgpu_dpm.c
index 89fbee568be4..5504d81c77b7 100644
--- a/drivers/gpu/drm/amd/pm/amdgpu_dpm.c
+++ b/drivers/gpu/drm/amd/pm/amdgpu_dpm.c
@@ -173,6 +173,17 @@ bool amdgpu_dpm_is_baco_supported(struct amdgpu_device *adev)
 
 	if (!pp_funcs || !pp_funcs->get_asic_baco_capability)
 		return false;
+	/* Don't use baco for reset in S3.
+	 * This is a workaround for some platforms
+	 * where entering BACO during suspend
+	 * seems to cause reboots or hangs.
+	 * This might be related to the fact that BACO controls
+	 * power to the whole GPU including devices like audio and USB.
+	 * Powering down/up everything may adversely affect these other
+	 * devices.  Needs more investigation.
+	 */
+	if (adev->in_s3)
+		return false;
 
 	mutex_lock(&adev->pm.mutex);
 
@@ -500,6 +511,9 @@ int amdgpu_dpm_send_hbm_bad_pages_num(struct amdgpu_device *adev, uint32_t size)
 	struct smu_context *smu = adev->powerplay.pp_handle;
 	int ret = 0;
 
+	if (!is_support_sw_smu(adev))
+		return -EOPNOTSUPP;
+
 	mutex_lock(&adev->pm.mutex);
 	ret = smu_send_hbm_bad_pages_num(smu, size);
 	mutex_unlock(&adev->pm.mutex);
@@ -512,6 +526,9 @@ int amdgpu_dpm_send_hbm_bad_channel_flag(struct amdgpu_device *adev, uint32_t si
 	struct smu_context *smu = adev->powerplay.pp_handle;
 	int ret = 0;
 
+	if (!is_support_sw_smu(adev))
+		return -EOPNOTSUPP;
+
 	mutex_lock(&adev->pm.mutex);
 	ret = smu_send_hbm_bad_channel_flag(smu, size);
 	mutex_unlock(&adev->pm.mutex);