Merge tag 'drm-for-v4.9' of git://people.freedesktop.org/~airlied/linux

Pull drm updates from Dave Airlie:
 "Core:
   - Fence destaging work
   - DRIVER_LEGACY to split off legacy drm drivers
   - drm_mm refactoring
   - Splitting drm_crtc.c into chunks and documenting better
   - Display info fixes
   - rbtree support for prime buffer lookup
   - Simple VGA DAC driver

  Panel:
   - Add Nexus 7 panel
   - More simple panels

  i915:
   - Refactoring GEM naming
   - Refactored vma/active tracking
   - Lockless request lookups
   - Better stolen memory support
   - FBC fixes
   - SKL watermark fixes
   - VGPU improvements
   - dma-buf fencing support
   - Better DP dongle support

  amdgpu:
   - Powerplay for Iceland asics
   - Improved GPU reset support
   - UVD/VEC powergating support for CZ/ST
   - Preinitialised VRAM buffer support
   - Virtual display support
   - Initial SI support
   - GTT rework
   - PCI shutdown callback support
   - HPD IRQ storm fixes

  amdkfd:
   - bugfixes

  tilcdc:
   - Atomic modesetting support

  mediatek:
   - AAL + GAMMA engine support
   - Hook up gamma LUT
   - Temporal dithering support

  imx:
   - Pixel clock from devicetree
   - drm bridge support for LVDS bridges
   - active plane reconfiguration
   - VDIC deinterlacer support
   - Frame synchronisation unit support
   - Color space conversion support

  analogix:
   - PSR support
   - Better panel on/off support

  rockchip:
   - rk3399 vop/crtc support
   - PSR support

  vc4:
   - Interlaced vblank timing
   - 3D rendering CPU overhead reduction
   - HDMI output fixes

  tda998x:
   - HDMI audio ASoC support

  sunxi:
   - Allwinner A33 support
   - better TCON support

  msm:
   - DT binding cleanups
   - Explicit fence-fd support

  sti:
   - remove sti415/416 support

  etnaviv:
   - MMUv2 refactoring
   - GC3000 support

  exynos:
   - Refactoring HDMI DCC/PHY
   - G2D pm regression fix
   - Page fault issues with wait for vblank

  There is no nouveau work in this tree, as Ben didn't get a pull
  request in, and he was fighting moving to atomic and adding mst
  support, so maybe best it waits for a cycle"

* tag 'drm-for-v4.9' of git://people.freedesktop.org/~airlied/linux: (1412 commits)
  drm/crtc: constify drm_crtc_index parameter
  drm/i915: Fix conflict resolution from backmerge of v4.8-rc8 to drm-next
  drm/i915/guc: Unwind GuC workqueue reservation if request construction fails
  drm/i915: Reset the breadcrumbs IRQ more carefully
  drm/i915: Force relocations via cpu if we run out of idle aperture
  drm/i915: Distinguish last emitted request from last submitted request
  drm/i915: Allow DP to work w/o EDID
  drm/i915: Move long hpd handling into the hotplug work
  drm/i915/execlists: Reinitialise context image after GPU hang
  drm/i915: Use correct index for backtracking HUNG semaphores
  drm/i915: Unalias obj->phys_handle and obj->userptr
  drm/i915: Just clear the mmiodebug before a register access
  drm/i915/gen9: only add the planes actually affected by ddb changes
  drm/i915: Allow PCH DPLL sharing regardless of DPLL_SDVO_HIGH_SPEED
  drm/i915/bxt: Fix HDMI DPLL configuration
  drm/i915/gen9: fix the watermark res_blocks value
  drm/i915/gen9: fix plane_blocks_per_line on watermarks calculations
  drm/i915/gen9: minimum scanlines for Y tile is not always 4
  drm/i915/gen9: fix the WaWmMemoryReadLatency implementation
  drm/i915/kbl: KBL also needs to run the SAGV code
  ...

1 files changed, 182 insertions, 340 deletions

diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
index 48030f0cf497..cd37ac058675 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
@@ -585,330 +585,6 @@ int analogix_dp_write_byte_to_dpcd(struct analogix_dp_device *dp,
 	return retval;
 }
 
-int analogix_dp_read_byte_from_dpcd(struct analogix_dp_device *dp,
-				    unsigned int reg_addr,
-				    unsigned char *data)
-{
-	u32 reg;
-	int i;
-	int retval;
-
-	for (i = 0; i < 3; i++) {
-		/* Clear AUX CH data buffer */
-		reg = BUF_CLR;
-		writel(reg, dp->reg_base + ANALOGIX_DP_BUFFER_DATA_CTL);
-
-		/* Select DPCD device address */
-		reg = AUX_ADDR_7_0(reg_addr);
-		writel(reg, dp->reg_base + ANALOGIX_DP_AUX_ADDR_7_0);
-		reg = AUX_ADDR_15_8(reg_addr);
-		writel(reg, dp->reg_base + ANALOGIX_DP_AUX_ADDR_15_8);
-		reg = AUX_ADDR_19_16(reg_addr);
-		writel(reg, dp->reg_base + ANALOGIX_DP_AUX_ADDR_19_16);
-
-		/*
-		 * Set DisplayPort transaction and read 1 byte
-		 * If bit 3 is 1, DisplayPort transaction.
-		 * If Bit 3 is 0, I2C transaction.
-		 */
-		reg = AUX_TX_COMM_DP_TRANSACTION | AUX_TX_COMM_READ;
-		writel(reg, dp->reg_base + ANALOGIX_DP_AUX_CH_CTL_1);
-
-		/* Start AUX transaction */
-		retval = analogix_dp_start_aux_transaction(dp);
-		if (retval == 0)
-			break;
-
-		dev_dbg(dp->dev, "%s: Aux Transaction fail!\n", __func__);
-	}
-
-	/* Read data buffer */
-	reg = readl(dp->reg_base + ANALOGIX_DP_BUF_DATA_0);
-	*data = (unsigned char)(reg & 0xff);
-
-	return retval;
-}
-
-int analogix_dp_write_bytes_to_dpcd(struct analogix_dp_device *dp,
-				    unsigned int reg_addr,
-				    unsigned int count,
-				    unsigned char data[])
-{
-	u32 reg;
-	unsigned int start_offset;
-	unsigned int cur_data_count;
-	unsigned int cur_data_idx;
-	int i;
-	int retval = 0;
-
-	/* Clear AUX CH data buffer */
-	reg = BUF_CLR;
-	writel(reg, dp->reg_base + ANALOGIX_DP_BUFFER_DATA_CTL);
-
-	start_offset = 0;
-	while (start_offset < count) {
-		/* Buffer size of AUX CH is 16 * 4bytes */
-		if ((count - start_offset) > 16)
-			cur_data_count = 16;
-		else
-			cur_data_count = count - start_offset;
-
-		for (i = 0; i < 3; i++) {
-			/* Select DPCD device address */
-			reg = AUX_ADDR_7_0(reg_addr + start_offset);
-			writel(reg, dp->reg_base + ANALOGIX_DP_AUX_ADDR_7_0);
-			reg = AUX_ADDR_15_8(reg_addr + start_offset);
-			writel(reg, dp->reg_base + ANALOGIX_DP_AUX_ADDR_15_8);
-			reg = AUX_ADDR_19_16(reg_addr + start_offset);
-			writel(reg, dp->reg_base + ANALOGIX_DP_AUX_ADDR_19_16);
-
-			for (cur_data_idx = 0; cur_data_idx < cur_data_count;
-			     cur_data_idx++) {
-				reg = data[start_offset + cur_data_idx];
-				writel(reg, dp->reg_base +
-				       ANALOGIX_DP_BUF_DATA_0 +
-				       4 * cur_data_idx);
-			}
-
-			/*
-			 * Set DisplayPort transaction and write
-			 * If bit 3 is 1, DisplayPort transaction.
-			 * If Bit 3 is 0, I2C transaction.
-			 */
-			reg = AUX_LENGTH(cur_data_count) |
-				AUX_TX_COMM_DP_TRANSACTION | AUX_TX_COMM_WRITE;
-			writel(reg, dp->reg_base + ANALOGIX_DP_AUX_CH_CTL_1);
-
-			/* Start AUX transaction */
-			retval = analogix_dp_start_aux_transaction(dp);
-			if (retval == 0)
-				break;
-
-			dev_dbg(dp->dev, "%s: Aux Transaction fail!\n",
-				__func__);
-		}
-
-		start_offset += cur_data_count;
-	}
-
-	return retval;
-}
-
-int analogix_dp_read_bytes_from_dpcd(struct analogix_dp_device *dp,
-				     unsigned int reg_addr,
-				     unsigned int count,
-				     unsigned char data[])
-{
-	u32 reg;
-	unsigned int start_offset;
-	unsigned int cur_data_count;
-	unsigned int cur_data_idx;
-	int i;
-	int retval = 0;
-
-	/* Clear AUX CH data buffer */
-	reg = BUF_CLR;
-	writel(reg, dp->reg_base + ANALOGIX_DP_BUFFER_DATA_CTL);
-
-	start_offset = 0;
-	while (start_offset < count) {
-		/* Buffer size of AUX CH is 16 * 4bytes */
-		if ((count - start_offset) > 16)
-			cur_data_count = 16;
-		else
-			cur_data_count = count - start_offset;
-
-		/* AUX CH Request Transaction process */
-		for (i = 0; i < 3; i++) {
-			/* Select DPCD device address */
-			reg = AUX_ADDR_7_0(reg_addr + start_offset);
-			writel(reg, dp->reg_base + ANALOGIX_DP_AUX_ADDR_7_0);
-			reg = AUX_ADDR_15_8(reg_addr + start_offset);
-			writel(reg, dp->reg_base + ANALOGIX_DP_AUX_ADDR_15_8);
-			reg = AUX_ADDR_19_16(reg_addr + start_offset);
-			writel(reg, dp->reg_base + ANALOGIX_DP_AUX_ADDR_19_16);
-
-			/*
-			 * Set DisplayPort transaction and read
-			 * If bit 3 is 1, DisplayPort transaction.
-			 * If Bit 3 is 0, I2C transaction.
-			 */
-			reg = AUX_LENGTH(cur_data_count) |
-				AUX_TX_COMM_DP_TRANSACTION | AUX_TX_COMM_READ;
-			writel(reg, dp->reg_base + ANALOGIX_DP_AUX_CH_CTL_1);
-
-			/* Start AUX transaction */
-			retval = analogix_dp_start_aux_transaction(dp);
-			if (retval == 0)
-				break;
-
-			dev_dbg(dp->dev, "%s: Aux Transaction fail!\n",
-				__func__);
-		}
-
-		for (cur_data_idx = 0; cur_data_idx < cur_data_count;
-		    cur_data_idx++) {
-			reg = readl(dp->reg_base + ANALOGIX_DP_BUF_DATA_0
-						 + 4 * cur_data_idx);
-			data[start_offset + cur_data_idx] =
-				(unsigned char)reg;
-		}
-
-		start_offset += cur_data_count;
-	}
-
-	return retval;
-}
-
-int analogix_dp_select_i2c_device(struct analogix_dp_device *dp,
-				  unsigned int device_addr,
-				  unsigned int reg_addr)
-{
-	u32 reg;
-	int retval;
-
-	/* Set EDID device address */
-	reg = device_addr;
-	writel(reg, dp->reg_base + ANALOGIX_DP_AUX_ADDR_7_0);
-	writel(0x0, dp->reg_base + ANALOGIX_DP_AUX_ADDR_15_8);
-	writel(0x0, dp->reg_base + ANALOGIX_DP_AUX_ADDR_19_16);
-
-	/* Set offset from base address of EDID device */
-	writel(reg_addr, dp->reg_base + ANALOGIX_DP_BUF_DATA_0);
-
-	/*
-	 * Set I2C transaction and write address
-	 * If bit 3 is 1, DisplayPort transaction.
-	 * If Bit 3 is 0, I2C transaction.
-	 */
-	reg = AUX_TX_COMM_I2C_TRANSACTION | AUX_TX_COMM_MOT |
-		AUX_TX_COMM_WRITE;
-	writel(reg, dp->reg_base + ANALOGIX_DP_AUX_CH_CTL_1);
-
-	/* Start AUX transaction */
-	retval = analogix_dp_start_aux_transaction(dp);
-	if (retval != 0)
-		dev_dbg(dp->dev, "%s: Aux Transaction fail!\n", __func__);
-
-	return retval;
-}
-
-int analogix_dp_read_byte_from_i2c(struct analogix_dp_device *dp,
-				   unsigned int device_addr,
-				   unsigned int reg_addr,
-				   unsigned int *data)
-{
-	u32 reg;
-	int i;
-	int retval;
-
-	for (i = 0; i < 3; i++) {
-		/* Clear AUX CH data buffer */
-		reg = BUF_CLR;
-		writel(reg, dp->reg_base + ANALOGIX_DP_BUFFER_DATA_CTL);
-
-		/* Select EDID device */
-		retval = analogix_dp_select_i2c_device(dp, device_addr,
-						       reg_addr);
-		if (retval != 0)
-			continue;
-
-		/*
-		 * Set I2C transaction and read data
-		 * If bit 3 is 1, DisplayPort transaction.
-		 * If Bit 3 is 0, I2C transaction.
-		 */
-		reg = AUX_TX_COMM_I2C_TRANSACTION |
-			AUX_TX_COMM_READ;
-		writel(reg, dp->reg_base + ANALOGIX_DP_AUX_CH_CTL_1);
-
-		/* Start AUX transaction */
-		retval = analogix_dp_start_aux_transaction(dp);
-		if (retval == 0)
-			break;
-
-		dev_dbg(dp->dev, "%s: Aux Transaction fail!\n", __func__);
-	}
-
-	/* Read data */
-	if (retval == 0)
-		*data = readl(dp->reg_base + ANALOGIX_DP_BUF_DATA_0);
-
-	return retval;
-}
-
-int analogix_dp_read_bytes_from_i2c(struct analogix_dp_device *dp,
-				    unsigned int device_addr,
-				    unsigned int reg_addr,
-				    unsigned int count,
-				    unsigned char edid[])
-{
-	u32 reg;
-	unsigned int i, j;
-	unsigned int cur_data_idx;
-	unsigned int defer = 0;
-	int retval = 0;
-
-	for (i = 0; i < count; i += 16) {
-		for (j = 0; j < 3; j++) {
-			/* Clear AUX CH data buffer */
-			reg = BUF_CLR;
-			writel(reg, dp->reg_base + ANALOGIX_DP_BUFFER_DATA_CTL);
-
-			/* Set normal AUX CH command */
-			reg = readl(dp->reg_base + ANALOGIX_DP_AUX_CH_CTL_2);
-			reg &= ~ADDR_ONLY;
-			writel(reg, dp->reg_base + ANALOGIX_DP_AUX_CH_CTL_2);
-
-			/*
-			 * If Rx sends defer, Tx sends only reads
-			 * request without sending address
-			 */
-			if (!defer)
-				retval = analogix_dp_select_i2c_device(dp,
-						device_addr, reg_addr + i);
-			else
-				defer = 0;
-
-			if (retval == 0) {
-				/*
-				 * Set I2C transaction and write data
-				 * If bit 3 is 1, DisplayPort transaction.
-				 * If Bit 3 is 0, I2C transaction.
-				 */
-				reg = AUX_LENGTH(16) |
-					AUX_TX_COMM_I2C_TRANSACTION |
-					AUX_TX_COMM_READ;
-				writel(reg, dp->reg_base +
-					ANALOGIX_DP_AUX_CH_CTL_1);
-
-				/* Start AUX transaction */
-				retval = analogix_dp_start_aux_transaction(dp);
-				if (retval == 0)
-					break;
-
-				dev_dbg(dp->dev, "%s: Aux Transaction fail!\n",
-					__func__);
-			}
-			/* Check if Rx sends defer */
-			reg = readl(dp->reg_base + ANALOGIX_DP_AUX_RX_COMM);
-			if (reg == AUX_RX_COMM_AUX_DEFER ||
-			    reg == AUX_RX_COMM_I2C_DEFER) {
-				dev_err(dp->dev, "Defer: %d\n\n", reg);
-				defer = 1;
-			}
-		}
-
-		for (cur_data_idx = 0; cur_data_idx < 16; cur_data_idx++) {
-			reg = readl(dp->reg_base + ANALOGIX_DP_BUF_DATA_0
-						 + 4 * cur_data_idx);
-			edid[i + cur_data_idx] = (unsigned char)reg;
-		}
-	}
-
-	return retval;
-}
-
 void analogix_dp_set_link_bandwidth(struct analogix_dp_device *dp, u32 bwtype)
 {
 	u32 reg;
@@ -1073,34 +749,22 @@ void analogix_dp_set_lane3_link_training(struct analogix_dp_device *dp,
 
 u32 analogix_dp_get_lane0_link_training(struct analogix_dp_device *dp)
 {
-	u32 reg;
-
-	reg = readl(dp->reg_base + ANALOGIX_DP_LN0_LINK_TRAINING_CTL);
-	return reg;
+	return readl(dp->reg_base + ANALOGIX_DP_LN0_LINK_TRAINING_CTL);
 }
 
 u32 analogix_dp_get_lane1_link_training(struct analogix_dp_device *dp)
 {
-	u32 reg;
-
-	reg = readl(dp->reg_base + ANALOGIX_DP_LN1_LINK_TRAINING_CTL);
-	return reg;
+	return readl(dp->reg_base + ANALOGIX_DP_LN1_LINK_TRAINING_CTL);
 }
 
 u32 analogix_dp_get_lane2_link_training(struct analogix_dp_device *dp)
 {
-	u32 reg;
-
-	reg = readl(dp->reg_base + ANALOGIX_DP_LN2_LINK_TRAINING_CTL);
-	return reg;
+	return readl(dp->reg_base + ANALOGIX_DP_LN2_LINK_TRAINING_CTL);
 }
 
 u32 analogix_dp_get_lane3_link_training(struct analogix_dp_device *dp)
 {
-	u32 reg;
-
-	reg = readl(dp->reg_base + ANALOGIX_DP_LN3_LINK_TRAINING_CTL);
-	return reg;
+	return readl(dp->reg_base + ANALOGIX_DP_LN3_LINK_TRAINING_CTL);
 }
 
 void analogix_dp_reset_macro(struct analogix_dp_device *dp)
@@ -1322,3 +986,181 @@ void analogix_dp_disable_scrambling(struct analogix_dp_device *dp)
 	reg |= SCRAMBLING_DISABLE;
 	writel(reg, dp->reg_base + ANALOGIX_DP_TRAINING_PTN_SET);
 }
+
+void analogix_dp_enable_psr_crc(struct analogix_dp_device *dp)
+{
+	writel(PSR_VID_CRC_ENABLE, dp->reg_base + ANALOGIX_DP_CRC_CON);
+}
+
+void analogix_dp_send_psr_spd(struct analogix_dp_device *dp,
+			      struct edp_vsc_psr *vsc)
+{
+	unsigned int val;
+
+	/* don't send info frame */
+	val = readl(dp->reg_base + ANALOGIX_DP_PKT_SEND_CTL);
+	val &= ~IF_EN;
+	writel(val, dp->reg_base + ANALOGIX_DP_PKT_SEND_CTL);
+
+	/* configure single frame update mode */
+	writel(PSR_FRAME_UP_TYPE_BURST | PSR_CRC_SEL_HARDWARE,
+	       dp->reg_base + ANALOGIX_DP_PSR_FRAME_UPDATE_CTRL);
+
+	/* configure VSC HB0~HB3 */
+	writel(vsc->sdp_header.HB0, dp->reg_base + ANALOGIX_DP_SPD_HB0);
+	writel(vsc->sdp_header.HB1, dp->reg_base + ANALOGIX_DP_SPD_HB1);
+	writel(vsc->sdp_header.HB2, dp->reg_base + ANALOGIX_DP_SPD_HB2);
+	writel(vsc->sdp_header.HB3, dp->reg_base + ANALOGIX_DP_SPD_HB3);
+
+	/* configure reused VSC PB0~PB3, magic number from vendor */
+	writel(0x00, dp->reg_base + ANALOGIX_DP_SPD_PB0);
+	writel(0x16, dp->reg_base + ANALOGIX_DP_SPD_PB1);
+	writel(0xCE, dp->reg_base + ANALOGIX_DP_SPD_PB2);
+	writel(0x5D, dp->reg_base + ANALOGIX_DP_SPD_PB3);
+
+	/* configure DB0 / DB1 values */
+	writel(vsc->DB0, dp->reg_base + ANALOGIX_DP_VSC_SHADOW_DB0);
+	writel(vsc->DB1, dp->reg_base + ANALOGIX_DP_VSC_SHADOW_DB1);
+
+	/* set reuse spd inforframe */
+	val = readl(dp->reg_base + ANALOGIX_DP_VIDEO_CTL_3);
+	val |= REUSE_SPD_EN;
+	writel(val, dp->reg_base + ANALOGIX_DP_VIDEO_CTL_3);
+
+	/* mark info frame update */
+	val = readl(dp->reg_base + ANALOGIX_DP_PKT_SEND_CTL);
+	val = (val | IF_UP) & ~IF_EN;
+	writel(val, dp->reg_base + ANALOGIX_DP_PKT_SEND_CTL);
+
+	/* send info frame */
+	val = readl(dp->reg_base + ANALOGIX_DP_PKT_SEND_CTL);
+	val |= IF_EN;
+	writel(val, dp->reg_base + ANALOGIX_DP_PKT_SEND_CTL);
+}
+
+ssize_t analogix_dp_transfer(struct analogix_dp_device *dp,
+			     struct drm_dp_aux_msg *msg)
+{
+	u32 reg;
+	u8 *buffer = msg->buffer;
+	int timeout_loop = 0;
+	unsigned int i;
+	int num_transferred = 0;
+
+	/* Buffer size of AUX CH is 16 bytes */
+	if (WARN_ON(msg->size > 16))
+		return -E2BIG;
+
+	/* Clear AUX CH data buffer */
+	reg = BUF_CLR;
+	writel(reg, dp->reg_base + ANALOGIX_DP_BUFFER_DATA_CTL);
+
+	switch (msg->request & ~DP_AUX_I2C_MOT) {
+	case DP_AUX_I2C_WRITE:
+		reg = AUX_TX_COMM_WRITE | AUX_TX_COMM_I2C_TRANSACTION;
+		if (msg->request & DP_AUX_I2C_MOT)
+			reg |= AUX_TX_COMM_MOT;
+		break;
+
+	case DP_AUX_I2C_READ:
+		reg = AUX_TX_COMM_READ | AUX_TX_COMM_I2C_TRANSACTION;
+		if (msg->request & DP_AUX_I2C_MOT)
+			reg |= AUX_TX_COMM_MOT;
+		break;
+
+	case DP_AUX_NATIVE_WRITE:
+		reg = AUX_TX_COMM_WRITE | AUX_TX_COMM_DP_TRANSACTION;
+		break;
+
+	case DP_AUX_NATIVE_READ:
+		reg = AUX_TX_COMM_READ | AUX_TX_COMM_DP_TRANSACTION;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	reg |= AUX_LENGTH(msg->size);
+	writel(reg, dp->reg_base + ANALOGIX_DP_AUX_CH_CTL_1);
+
+	/* Select DPCD device address */
+	reg = AUX_ADDR_7_0(msg->address);
+	writel(reg, dp->reg_base + ANALOGIX_DP_AUX_ADDR_7_0);
+	reg = AUX_ADDR_15_8(msg->address);
+	writel(reg, dp->reg_base + ANALOGIX_DP_AUX_ADDR_15_8);
+	reg = AUX_ADDR_19_16(msg->address);
+	writel(reg, dp->reg_base + ANALOGIX_DP_AUX_ADDR_19_16);
+
+	if (!(msg->request & DP_AUX_I2C_READ)) {
+		for (i = 0; i < msg->size; i++) {
+			reg = buffer[i];
+			writel(reg, dp->reg_base + ANALOGIX_DP_BUF_DATA_0 +
+			       4 * i);
+			num_transferred++;
+		}
+	}
+
+	/* Enable AUX CH operation */
+	reg = AUX_EN;
+
+	/* Zero-sized messages specify address-only transactions. */
+	if (msg->size < 1)
+		reg |= ADDR_ONLY;
+
+	writel(reg, dp->reg_base + ANALOGIX_DP_AUX_CH_CTL_2);
+
+	/* Is AUX CH command reply received? */
+	/* TODO: Wait for an interrupt instead of looping? */
+	reg = readl(dp->reg_base + ANALOGIX_DP_INT_STA);
+	while (!(reg & RPLY_RECEIV)) {
+		timeout_loop++;
+		if (timeout_loop > DP_TIMEOUT_LOOP_COUNT) {
+			dev_err(dp->dev, "AUX CH command reply failed!\n");
+			return -ETIMEDOUT;
+		}
+		reg = readl(dp->reg_base + ANALOGIX_DP_INT_STA);
+		usleep_range(10, 11);
+	}
+
+	/* Clear interrupt source for AUX CH command reply */
+	writel(RPLY_RECEIV, dp->reg_base + ANALOGIX_DP_INT_STA);
+
+	/* Clear interrupt source for AUX CH access error */
+	reg = readl(dp->reg_base + ANALOGIX_DP_INT_STA);
+	if (reg & AUX_ERR) {
+		writel(AUX_ERR, dp->reg_base + ANALOGIX_DP_INT_STA);
+		return -EREMOTEIO;
+	}
+
+	/* Check AUX CH error access status */
+	reg = readl(dp->reg_base + ANALOGIX_DP_AUX_CH_STA);
+	if ((reg & AUX_STATUS_MASK)) {
+		dev_err(dp->dev, "AUX CH error happened: %d\n\n",
+			reg & AUX_STATUS_MASK);
+		return -EREMOTEIO;
+	}
+
+	if (msg->request & DP_AUX_I2C_READ) {
+		for (i = 0; i < msg->size; i++) {
+			reg = readl(dp->reg_base + ANALOGIX_DP_BUF_DATA_0 +
+				    4 * i);
+			buffer[i] = (unsigned char)reg;
+			num_transferred++;
+		}
+	}
+
+	/* Check if Rx sends defer */
+	reg = readl(dp->reg_base + ANALOGIX_DP_AUX_RX_COMM);
+	if (reg == AUX_RX_COMM_AUX_DEFER)
+		msg->reply = DP_AUX_NATIVE_REPLY_DEFER;
+	else if (reg == AUX_RX_COMM_I2C_DEFER)
+		msg->reply = DP_AUX_I2C_REPLY_DEFER;
+	else if ((msg->request & ~DP_AUX_I2C_MOT) == DP_AUX_I2C_WRITE ||
+		 (msg->request & ~DP_AUX_I2C_MOT) == DP_AUX_I2C_READ)
+		msg->reply = DP_AUX_I2C_REPLY_ACK;
+	else if ((msg->request & ~DP_AUX_I2C_MOT) == DP_AUX_NATIVE_WRITE ||
+		 (msg->request & ~DP_AUX_I2C_MOT) == DP_AUX_NATIVE_READ)
+		msg->reply = DP_AUX_NATIVE_REPLY_ACK;
+
+	return num_transferred;
+}